* fix(acp): interrupt idle reads on cancellation
* fix(acp): make idle-read interruption per-Read, not per-Serve-call
Addresses the P2 on #782.
The previous design raced a single, whole-connection Once (endRead) between the
read loop's own "I have a terminal result" claim and a watcher goroutine's
"ctx is done, treat this as interrupted" claim. This has a real, deterministic
failure mode that has nothing to do with goroutine-scheduling luck: bufio.Reader
can obtain data AND a terminal error from ONE underlying Read call (io.Reader
explicitly permits returning (n>0, err) together). If a line delimiter is found
within that data, ReadBytes returns the line with a nil error for that call, but
bufio caches the error internally and returns it — without ever touching the
underlying reader again — on the very next ReadBytes call. If cancellation
happens in the gap between that first, successful read and the next one (e.g.
while a synchronously-dispatched handler is still writing its response), the
watcher's ctx.Done() case fires and claims the Once BEFORE the read loop ever
gets back to a ReadBytes call — so when the cached error then surfaces (with
zero contact with the underlying reader, let alone anything closing it), it is
misattributed as a cancellation-driven interruption and silently swallowed as a
clean shutdown, hiding a genuine broken transport.
The fix moves interruption-detection down to the Read call itself instead of
bracketing the whole Serve loop. interruptibleReader wraps the connection's
reader: each Read runs the underlying call on its own goroutine and races it
against ctx.Done(). If the underlying call finishes first, its result is
returned untouched — cancellation a moment later has no bearing on a call that
already had its answer. If ctx.Done() fires first, the reader is closed (when
closable) to nudge a genuinely blocked read, a generation counter is bumped, and
the call still waits for and returns the underlying call's own result rather
than a synthesized one.
Serve then brackets each ReadBytes call (which may invoke the wrapped Read zero
or more times — zero when bufio answers from its own buffer, including a
previously-cached error) with a snapshot of that counter before and after. A
read whose bracket shows no change was never raced against cancellation — either
answered from the buffer or genuinely completed before ctx.Done() could matter —
so its outcome is reported truthfully regardless of the ctx state by the time it
surfaces. Only a bracket that changed proves this specific call actually took
the cancellation branch.
Verified the fix has teeth: reverted to the original implementation and
confirmed the new regression test (which forces the exact bufio-caching
sequence deterministically, with a panic guard proving the underlying reader is
never called a second time) fails 100% of the time against it, then restored
the fix and confirmed it passes.
Also applied the two open review threads on the existing tests: readStarted and
writeStarted are now buffered channels with non-blocking sends rather than
close(), so a future change causing an extra read or write can't panic on a
double-close.
Validated with go build/vet/test on Windows, plus go vet/build and
`go test -race ./internal/acp/... -count=50` (and count=100 focused on the
cancellation/error tests) under WSL/Linux — this session's Windows host has no
C toolchain for -race directly.
* fix(acp): preserve decided read results and require explicit reader ownership
Addresses jatmn's two #782 review findings:
- interruptibleReader.Read's select between resultCh and ctx.Done()
chooses pseudo-randomly when both are ready, so a real terminal read
error decided just before cancellation could be misattributed to
shutdown and silently swallowed. Re-check resultCh non-blockingly
before claiming a call for cancellation.
- NewConn inferred reader ownership from an io.Closer assertion and
closed any reader that happened to implement it, including one a
caller merely borrowed. Split into NewConn (never closes r) and
NewOwnedConn (explicit ownership, closes r on cancellation), and
switch the sole production call site (process stdin) to the latter.
Also applies CodeRabbit's atomic.Int64 and leading-ctx-parameter nits.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(acp): synchronize read completion with cancellation
Amp-Thread-ID: https://ampcode.com/threads/T-019fa018-9e4e-7506-85ab-e151888bfd71
Co-authored-by: Pierre Bruno <[email protected]>
* fix(acp): preserve read completion across cancellation
Amp-Thread-ID: https://ampcode.com/threads/T-019fa55a-483a-7119-92aa-4953a72f2a76
Co-authored-by: Pierre Bruno <[email protected]>
* test(acp): bound buffered error synchronization
Amp-Thread-ID: https://ampcode.com/threads/T-019fa55a-483a-7119-92aa-4953a72f2a76
Co-authored-by: Pierre Bruno <[email protected]>
* fix(acp): report shutdown transport errors
Amp-Thread-ID: https://ampcode.com/threads/T-019fa7a0-1223-701d-9529-48ba5d7cf8c8
Co-authored-by: Pierre Bruno <[email protected]>
* test(acp): inject cancellation context
Amp-Thread-ID: https://ampcode.com/threads/T-019fa7a0-1223-701d-9529-48ba5d7cf8c8
Co-authored-by: Pierre Bruno <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
Co-authored-by: Amp <[email protected]>
* fix(swarm): close lifecycle admission on shutdown
* fix(swarm): admit lifecycle work without holding the lock across Launch
Addresses the P1 on #776 plus the two documentation P3s.
[P1] beginLifecycleAdmission returned with lifecycleMu.RLock() held for the
caller's entire duration — including the call into the injected
MemberLauncher.Launch. Close needs the write lock before it can call s.cancel(),
so a launcher that blocks in Launch waiting on its context (the ordinary shape of
a launcher that waits for a slot, a daemon connection, or a sandbox handshake)
deadlocked every Close caller: the launch held the read lock while Close waited
for the write lock to reach the very cancellation the launch needed to unblock.
beginLifecycleAdmission is now a counted ticket: it holds lifecycleMu only across
the closed check and a lifecycleWork.Add(1), then returns a release func
(lifecycleWork.Done) the caller defers. Close flips closed and releases the lock
BEFORE calling cancel, then waits out lifecycleWork (admitted-but-unfinished
work) followed by watchers (goroutines admitted work may still be starting) — so
it remains a true completion barrier without holding any lock across external
launcher code. Every call site (Spawn, Handoff, AdoptOrphans, the retry path in
watch, and afterExit) moved to the ticket pattern.
[P3] beginLifecycleAdmission's contract and the Scheduler/Close handoff are now
both documented at the point that matters: the func-returning signature makes
the release contract explicit in the type itself, and Scheduler's comment spells
out why the read/write lock ordering guarantees exactly one of Scheduler or
Close closes whatever scheduler ends up installed.
Tests: TestCloseCancelsLauncherBlockedInLaunch reproduces the exact deadlock
(spawn parked in Launch, Close in a second goroutine, both must complete once
cancellation reaches the launcher) — verified it hangs under the old held-lock
pattern by temporarily restoring it. TestCloseWaitsForAdmittedSpawn is the
converse: Close must not return while an admitted spawn is still running.
Validated with `go test -race ./internal/swarm/... -count=1` under WSL/Linux
(this session's Windows host has no C toolchain for -race directly), plus
`go vet ./...` under WSL and go build/vet/test on Windows.
* fix(swarm): fail late queue admissions and dequeues after shutdown
Addresses jatmn's two #776 review findings:
- Close swept (clearQueue) every team's queue before waiting for
admitted-but-in-flight lifecycle operations to finish. A Spawn,
Handoff, or AdoptOrphans call that got its ticket right before
closed flipped could still append to a team's queue after the
sweep ran, stranding that spec forever (never launched, since
shutdown began; never failed, since the sweep won't run again).
Reorder Close to wait for lifecycleWork before sweeping queues, so
every queue append from already-admitted work is visible to the
sweep.
- afterExitAdmitted dequeued a queued spec (t.onExit) and launched it
unconditionally once its own ticket was granted, even though Close
can flip closed in the gap between that dequeue (which makes the
spec invisible to the clearQueue sweep) and the launch. Re-check
closed after dequeuing so a spec pulled off the queue after
shutdown began fails with ErrSwarmClosed instead of starting a new
worker.
Both regression tests are verified to fail against the pre-fix code
(confirmed by temporarily reverting each fix and rerunning).
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(swarm): snapshot teams after lifecycle work stops
Amp-Thread-ID: https://ampcode.com/threads/T-019fa018-a4d5-7078-a80b-802bab23607e
Co-authored-by: Pierre Bruno <[email protected]>
* fix(swarm): reject late admitted launches during shutdown
Re-check the closed state at the final launcher boundary so lifecycle work admitted before Close cannot start or retry a member after shutdown has already won the race.
Add deterministic late-dispatch and scheduler-handoff coverage, stress concurrent Spawn and Close under the race detector, and keep the late-team snapshot regression isolated from launcher behavior.
Amp-Thread-ID: https://ampcode.com/threads/T-019fa55a-4f7f-766e-a312-a7db232b9987
Co-authored-by: Pierre Bruno <[email protected]>
* fix(swarm): reject post-close launch commits
Amp-Thread-ID: https://ampcode.com/threads/T-019fa7a0-1223-701d-9529-48ba5d7cf8c8
Co-authored-by: Pierre Bruno <[email protected]>
* fix(swarm): gate retry relaunch on the post-close commit
The post-Launch shutdown gate added for spawns and queue drains was missing
from the bounded-retry path, which called the launcher and swapped in the new
handle unguarded. Since FuncLauncher returns a live handle immediately without
consulting its context, a Close landing between the pre-check and Launch's
return left the watcher supervising a member relaunched after shutdown began —
and recording that member's outcome on the task.
Extract the commit gate as commitLaunch and route the relaunch through it via
relaunchAdmitted, so an initial launch and a retry pass the same three gates:
admission, the pre-Launch re-check, and the post-Launch commit. When shutdown
wins, the handle is reaped and the watcher records the terminal failure instead
of adopting it.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
Co-authored-by: Amp <[email protected]>
* fix(providers): retry provably pre-send transport failures (#447)
A flaky link that failed the streaming completion POST at connect time
stopped the turn and forced a manual continue, because the shared retry
layer never retries transport errors: a completion POST is
non-idempotent, so a replay could duplicate billable work.
That rationale does not apply to a PROVABLY pre-send failure, where no
request bytes ever left this host: a replay cannot duplicate anything,
exactly like a 429/503 where the server told us it did not accept the
request. SendWithRetry now retries, with the existing backoff, only that
narrow class: DNS resolution failure, a refused or unreachable dial, and
a TLS handshake timeout. Every ambiguous or post-send failure stays
unretried and is checked first so a mixed message can never be misread:
connection reset, broken pipe, EOF, a bare i/o timeout, context
deadline. All three providers route their completion POST through this
layer, so one change covers them uniformly.
This deliberately narrows the issue's ask (which listed connection
reset) to the provably-safe subset, and keeps the reset-stays-unretried
test green. Tests cover the retry-on-pre-send, no-retry-on-ambiguous,
and predicate-classification paths.
NOTE FOR REVIEW: this refines a deliberately conservative, documented
no-retry stance. Opening it for the owner's sign-off on the stance, not
as a settled call.
* fix(providers): classify pre-send dials by errno so Windows retries too
CodeRabbit flagged that the pre-send predicate matched only POSIX dial
wording, so a refused or unreachable dial on Windows (whose text differs
entirely: 'No connection could be made because the target machine
actively refused it') would not be retried.
Match the syscall errno via errors.Is instead: Go maps ECONNREFUSED /
ENETUNREACH / EHOSTUNREACH / ECONNRESET to the host's real values,
including the WSA codes on Windows, so classification is identical on
every platform. Errno matching is also authoritative where the string
markers were only heuristic, closing the theoretical substring gap. The
string markers stay as a fallback for errors already flattened to text.
ECONNRESET is added to the post-send exclusions by identity so a Windows
reset is excluded too.
Tests build the production error shape (net.OpError -> os.SyscallError ->
errno) so the Windows path is exercised portably on every platform, plus
an end-to-end SendWithRetry case for an errno-wrapped refused dial. Cross
-compiled and vetted for linux and darwin.
* fix(providers): scope pre-send retry to the dial phase and fail fast on permanent errors
Addresses gnanam's two [Major] review findings on this PR.
[Major] Pre-send errno classification was not scoped to the dial, so a post-send
read/write carrying ECONNREFUSED/ENETUNREACH/EHOSTUNREACH (a route dropping
mid-generation) was misclassified "provably pre-send" and could replay a
non-idempotent completion POST up to 6 times. errors.Is matches an errno
anywhere in the chain regardless of which operation raised it, so
isPreSendTransportError now requires an Op=="dial" *net.OpError before admitting
those errnos or their POSIX wording. That makes "no request bytes were sent"
structural: a post-send failure can no longer replay a POST. The dial errno
match still covers Windows (Go maps the WSA* codes), so the platform coverage
this PR added is preserved.
[Major] Permanent failures hung the agent ~60s on the 429-tuned schedule.
NXDOMAIN (net.DNSError with IsNotFound) is now treated as permanent and not
retried, and the pre-send path gets its own short bound and sub-second schedule
(preSendMaxAttempts=3, 500ms/1s) instead of reusing the 2/4/8/16/30s rate-limit
backoff, so a mistyped host or a dead local daemon fails in about 1.5s.
[Minor] Fixed the stale SendWithRetry doc that still claimed transport errors are
never replayed.
Tests: post-send read/write errnos and NXDOMAIN now assert exactly 1 call (no
replay); dial errnos plus the string fallback assert the pre-send cap; added the
pre-send backoff schedule. Race detector and all provider packages green.
* fix(providers): match Windows WSA dial errnos so refused dials retry on Windows too
CodeRabbit caught a real Windows bug, which I verified with a real dial on
Windows: errors.Is(err, syscall.ECONNREFUSED) returns FALSE for a refused dial
there, because a real Windows dial carries the raw WSAECONNREFUSED (10061) while
Go's syscall.ECONNREFUSED is a distinct value the net package never produces. The
POSIX string fallback ("connection refused") does not match the Windows wording
("No connection could be made because the target machine actively refused it")
either. So the pre-send dial classification silently never fired on Windows, the
exact platform this PR set out to fix.
Move the dial errnos into a platform-specific list (dialPreSendErrnos): POSIX
everywhere, plus the WSA* codes on Windows. The existing wrapDialErrno fixtures
wrap the Go syscall constants, which is why they passed on both platforms and
missed this. Adds TestIsPreSendTransportErrorRealRefusedDial, which does a REAL
refused dial and asserts pre-send classification, so the platform's true error
shape is exercised on every OS.
* fix(providers): exclude Plan 9 from the POSIX dial-errno build tag
* fix(providers): keep the pre-send errno classification off Plan 9
retry.go referenced syscall.ECONNRESET and dialPreSendErrnos directly, but the
errno definitions live in build-tagged files that exclude Plan 9 (which has no
BSD-style errno constants), so the package stopped compiling for GOOS=plan9 on
this branch even though it builds on the merge base.
Move the two syscall touch-points behind per-platform helpers: retry.go now
calls isConnResetErrno and ranges dialPreSendErrnos, both provided by
retry_dialerrno.go, retry_dialerrno_windows.go, and a new
retry_dialerrno_plan9.go. The Plan 9 variant supplies an empty errno list and a
false isConnResetErrno, so retry.go falls back to its existing string-marker
heuristics there. Behavior on linux/darwin/windows is unchanged (isConnResetErrno
matches the same syscall.ECONNRESET as before). retry_test.go is tagged !plan9
because it constructs real syscall.Errno dial shapes.
Verified: GOOS=plan9 build and vet now pass; windows and linux build, vet, gofmt,
and the full providerio test suite stay green.
* fix(providers): stop pre-send retry from replaying a redirected POST
Addresses jatmn's review on #750.
[P1] client.Do could follow a 307/308 after already transmitting the original
POST, and a dial failure to the redirect target then satisfied
isPreSendTransportError and replayed the request, re-billing a completion the
first host already received. SendWithRetry now disables redirect following
(CheckRedirect returns http.ErrUseLastResponse on a cloned client), so any
dial/DNS/TLS error from Do can only come from the single initial request and
the pre-send classification is sound. A 3xx surfaces as the response for the
caller's existing non-2xx handling. Regression test asserts the POST is sent
once and the 307 is not followed.
[P2] The pre-send retry used the loop-wide attempt counter shared with 429/503
retries, so a couple of status retries exhausted the pre-send budget and the
first dial/DNS/TLS blip after them got no retry. Track pre-send failures and
their backoff ordinal in a separate counter. Regression test covers a
status-then-transport-failure sequence.
[P3] Correct the Plan 9 and wrapDialErrno comments: the Plan 9 string-marker
fallback keeps the pre-send inclusions and the separate reset exclusion, and
the errno fixtures do not reproduce a real Windows dial (that carries distinct
WSA errnos), which the real-dial test covers.
* fix(providers): decouple the status retry budget from pre-send retries
Addresses jatmn's follow-up on #750.
The previous change gave pre-send failures their own counter, but every retry
still advanced the loop-wide attempt counter that the 429/503 branch used. So
the coupling survived in the opposite direction: two safely replayed refused
dials shortened the later status retry window and started its backoff at a
later rung.
Give the status path its own statusAttempts counter and backoff ordinal. With
both budgets tracked separately the shared loop counter has no remaining
reader, so the loop no longer carries one. Behaviour is unchanged when only one
kind of failure occurs: the first retryable status still waits on rung 1 and
still gets maxAttempts requests.
Adds TestSendWithRetryStatusBudgetSurvivesPreSendRetries, the inverse of the
existing mixed-sequence test: two refused dials followed by rate limiting must
still leave the status path its full window.
* fix(providers): keep following redirects, but never replay a redirected POST
Addresses jatmn's follow-up on #750.
Blocking redirects outright was too blunt. SendWithRetry is the shared
completion path, so replacing every caller's CheckRedirect with
ErrUseLastResponse turned a legitimate 307/308 from a redirecting
OpenAI-compatible gateway into a terminal non-2xx that providers report as an
upstream error, and it discarded an injected client's redirect policy.
Observe the redirect instead of preventing it: a per-attempt flag is set from
CheckRedirect, which then delegates to the caller's policy when one is set and
otherwise mirrors net/http's default ten-hop cap. The pre-send retry is gated on
that flag, so an attempt that entered a redirect is never replayed while
redirecting endpoints keep working. The safety property is unchanged, since a
dial failure on a redirect hop follows a POST the origin already received.
Adds three regressions: a redirect is followed through to the final response, a
dial failure after a redirect is not replayed, and a caller-supplied
CheckRedirect still runs and still decides.
* test(providerio): pin the redirect asymmetry for retryable statuses
A reviewer read the redirect guard as incomplete, because it stops a redirected
POST being replayed after a transport error but not after a 429/503/529. The
asymmetry is intentional, and nothing recorded that, so the next reader would
reasonably reach the same conclusion.
The two cases differ in what is known about the request. A transport failure
after a redirect leaves it unknown whether the redirect target received and
began processing the POST, so replaying could duplicate billable work. A
retryable status means every hop answered: the 307/308 is the origin declining
and delegating, and the 429 is the target declining as well, so nothing accepted
the request and a replay duplicates nothing.
The exposure is also the same as a retryable status with no redirect involved,
which this package has always retried, so guarding here would not close a gap.
It would make a rate-limited completion behind a redirecting gateway fail
outright rather than back off, which is the regression class already raised
against disabling redirects wholesale.
Adds the case as a test asserting the intended behaviour, plus a comment at the
branch explaining why it is not guarded.
* fix(providers): retry connect timeouts and proxy CONNECT failures
Three classification gaps against #447, all raised in review.
A connect-phase timeout was never retried. It is provably pre-send for the same
structural reason a refused dial is, since the connection was never established
and no request bytes left this host, but it arrives carrying "i/o timeout" and
the blanket wording exclusion rejected it before the connect gate could admit
it. Intermittent connect timeouts are exactly the transient failure the issue
is about, so the most common case was the one not covered. It is now admitted
ahead of the wording exclusions, gated on the connect phase so a post-send read
timeout, which is also Timeout(), still cannot replay a POST.
A failed CONNECT through an HTTP proxy was never retried either. net tags it Op
"proxyconnect" rather than "dial", so it missed the gate entirely. Same
guarantee applies: the tunnel to the model host was never built. The gate now
accepts both, which matters most in the environment where transient connect
failures are most common.
ETIMEDOUT and WSAETIMEDOUT join the errno lists so a connect timeout still
classifies if it reaches us with the errno but without the timeout flag.
The pre-send budget also now resets after a hop that reaches the server. It is
meant to bound consecutive connect failures, not the lifetime of the call, and
without the reset an early run of blips permanently spent it, so a later blip
surfaced as a transport error while the status budget still had room. That is
the coupling the two counters were split apart to remove, in the one ordering
the earlier tests missed. Total work stays bounded, since every reset costs a
status attempt and those are capped.
Also corrects the SendWithAuthRetry comment, which still claimed the inner path
retried only 429/503/529.
Tests cover dial and proxyconnect timeouts as retryable and read/write timeouts
as not, a refused proxy CONNECT, and the interleaved pre-send/status/pre-send
sequence. Each fix fails its test when reverted.
providerCommandTimeout bounded only the wait, so the call could take arbitrarily
longer than the 5s its error text promised. Two phases sat outside it.
Starting the process ran before the clock began. On Windows that is
CREATE_SUSPENDED, job-object creation and assignment, and a system-wide thread
snapshot, none of it fast on a cold or contended machine. The deadline is now
armed first and the start races it, so process creation is inside the budget.
Draining after termination was unbounded too: the timer path called Terminate
and then received on the wait with no limit. Terminate normally makes that
immediate, which is exactly why it survived unnoticed, but a tree that resists
termination held the call open long past the deadline that had just expired.
That receive is now bounded, and a call that gives up leaves cmd.Wait running,
so the output buffers are synchronised: the I/O pump keeps writing into buffers
the caller already holds, which a plain bytes.Buffer cannot survive.
The timeout error also carried nothing actionable. It was a bare string with the
underlying error and the command's stderr both dropped, so a user whose provider
command was slow got no clue which phase ran out or what the command had said.
It now names the phase, wraps the cause, and includes the redacted output the
failure path already had.
Both bounds are asserted on extracted helpers rather than end to end, because
end to end they are untestable: a terminated command stops writing and its wait
returns at once, so an unbounded drain and an unsynchronised buffer both pass a
whole-call test. The first version of these tests did exactly that and proved
nothing. Removing either bound now fails, as does arming the deadline after the
start, which reports the wrong phase.
* feat(providers): add Fireworks AI provider preset
Add an OpenAI-compatible Fireworks catalog entry with curated coding
models, models.dev alias mapping, onboarding tests, and README setup.
* fix(provider): use correct Fireworks DeepSeek V3 model ID
Update default and catalog model IDs to deepseek-v3-0324 per Fireworks API.
scrubSensitiveEnv removed ZERO_DAEMON_REMOTE_TOKEN but not its file
counterpart. TokenFromEnv accepts either form, so a sandboxed command
still inherited the path to the bridge token, and the default posture is
read-all, so it could then read the token itself.
Scrubbing the pointer is the whole fix rather than half of one: the path
comes from this variable alone and TokenFromEnv has no default location
to fall back on, so a command that never sees the variable has nothing to
guess at. This mirrors GOOGLE_APPLICATION_CREDENTIALS, which is already
scrubbed for the same reason.
Extends the existing scrub table, which compares the surviving
environment exactly, so the case fails if the entry is dropped. Verified:
without the fix the assertion reports ZERO_DAEMON_REMOTE_TOKEN_FILE
surviving into the scrubbed environment.
* fix(sandbox): deny reads of git's credential stores (#815)
git's credential-store backend keeps host passwords and personal access tokens
in cleartext, at ~/.git-credentials or ~/.config/git/credentials depending on
whether the user is on the XDG layout. Neither was on the deny list, so any
command the agent runs could read them.
Scoped to those two files deliberately. #815 also covers SSH private keys and
the GPG keyring, and those are a harder trade: denying ~/.ssh stops a sandboxed
git push over SSH from working, and excluding that directory is not even
sufficient, since an IdentityFile directive can point key material anywhere.
These two cost nothing by comparison, because git reads them to authenticate
rather than to know who the user is, so a sandboxed git keeps working and
simply cannot act as the user.
The XDG one denies the file rather than the directory around it, which is the
opposite of the choice made for ~/.config/zero and is deliberate: ~/.config/git
also holds the global git config, which userGitConfigReadPaths grants on
purpose so a sandboxed git can read user.name and aliases instead of failing
outright. Denying the directory would take that away.
Tests assert both stores are denied, that the git config beside the XDG one
stays readable, and that an explicit read grant still re-includes them like
every other entry. Dropping either entry fails the first; widening the XDG
entry to the directory fails the config assertion.
* test(sandbox): assert the credential deny exists before the grant lifts it
The allow-read case only checked that the credential store was absent from
the deny list once an explicit grant covered it. A deny rule that was never
added satisfies that just as well, so the test passed with the production
change reverted and proved nothing about the interaction it was named for.
Check both runs: denied with no grant, absent with one. The first leg is
what establishes there is something for the grant to override.
* test(tools): stop internal/tools failing on stock Windows
This package fails on every run on a Windows box without PowerShell 7, which
is what a stock install is: PowerShell 7 is a separate download. CI never sees
any of it, because the runners have 7. Three distinct causes, all surfaced by
the move to PowerShell in #804.
The stop-intent test waited a fixed second for a session to die and asserted on
whatever was true by then. Under cmd.exe that was enough; under PowerShell the
tree is slower to stand up and tear down, and the FIRST stop in a fresh process
pays the interpreter's cold start, so it routinely returned with termination
under way but unfinished. The assertion read that as a failed stop. It now
re-sends the stop until the session reports it has exited. Repeating is safe,
since Terminate is a no-op against an already-dead tree, and it keeps the
interrupt flag that a poll with empty chars would drop.
Separately, and pre-existing, every test that starts a session hit a teardown
race: a terminated process does not release its handles the instant the session
reports exited, and Windows refuses to remove a directory with an open handle
where POSIX does not. t.TempDir removes once and fails the test on the sharing
violation, so ordinary teardown timing was reported as a broken test. Those
roots now clean up with a bounded retry, and give up quietly rather than
failing: the process is already terminated, so the worst case is a stale
directory under the OS temp root.
Last, the MSYS guard test asserted a windows_shell_syntax block using a command
containing `&&`. On PowerShell 5.1 the windows_powershell_version preflight
added by #804 fires first and shadows it. The `&&` was incidental to what that
case is about, so it is gone. This one is worth noting as a shape rather than a
typo: a new preflight silently changed which block an older assertion got, and
only on the shell CI does not run.
Verified by running the package repeatedly rather than once: previously failing
on every run, now passing 3 of 3, and the stop-intent test passing 8 of 8 alone
and 6 of 6 under CPU contention. Disabling the terminate path still fails it,
so the assertion continues to bind.
* test(tools): assert the stop intent killed the session
The retry loop added to survive a slow PowerShell teardown also made the
test unfalsifiable. The helper sleeps 5s, well inside the 30s deadline, so
a terminate that did nothing at all would let the sleep end on its own and
every existing assertion would still hold: the session reports exited, it
reports an exit code, and the interrupted flag echoes the request rather
than the outcome. Neutering KillProcessTree confirmed it, the test passed.
Assert instead that the helper's completion line never appears, which
distinguishes a killed session from a finished one without depending on
how long the loop took. Output is accumulated across every poll rather
than read off the last result, because each continuation returns only what
the session produced since the previous collection.
* fix(tui): paste clipboard images with Ctrl+V
Ctrl+V did nothing when the clipboard held a screenshot, while right-click
paste attached it. The image plumbing was already there: routePaste probes the
OS clipboard for an image whenever a paste arrives with empty text.
The gap is that a clipboard holding only an image produces no bracketed paste
at all, since the terminal has no text to send, so routePaste never runs and its
probe never fires. Right-click reached the probe only because that path always
delivers a clipboardReadMsg, empty or not. Bubble's own Ctrl+V binding stays
disabled, so nothing else was listening for the key.
Handle Ctrl+V by issuing the image probe directly. It reads image content only,
never text, so bracketed paste remains the single text path and a Ctrl+V with
text on the clipboard is unaffected. The probe yields no message when there is
no image, keeping it a silent no-op, and it is gated on noBlockingModal so a
permission prompt or picker still swallows the key.
readClipboardImage becomes a var so the tests stub it instead of depending on
the machine's real clipboard.
Fixes#534
* fix(tui): also probe the clipboard on Cmd+V, and test the real key route
Two things raised in review, both fair.
The handler matched keyCtrl only, which is ModCtrl. macOS reports Command as
ModSuper, as the rest of the TUI already models it, so Cmd+V never reached the
image probe even though the change claimed to cover it. It now matches both, via
a keySuper helper alongside the existing modifier helpers.
Worth being precise about the limit: this only helps where the terminal delivers
the key to the application. A terminal that handles Cmd+V itself pastes the
clipboard TEXT and sends no key event at all, so an image-only clipboard still
produces nothing for this to react to. That is a separate problem from the one
being fixed here.
The tests also did not exercise the route they were named for. One asserted that
Update returned some non-nil command and then ran a freshly built probe; the
other never called Update at all. Both now stub the reader BEFORE Update and run
the command Update actually returned.
That matters more than it sounds. Making the branch return a different non-nil
command leaves the old assertion passing and fails the new one, which is exactly
the hole: the old test proved a command was issued, not that it was the image
probe. Removing the route entirely, or reverting to ModCtrl only, also fails now.
* fix(imageinput): report an unreadable clipboard image instead of silence
On macOS the clipboard reader shells to pngpaste or a PyObjC one-liner, and
neither ships with the OS: pngpaste is Homebrew-only and Apple dropped the
bundled PyObjC. A stock Mac therefore fails every time, and the failure was
returned as (nil, nil), which the caller reads as "no image on the clipboard"
and treats as a silent no-op. Pressing Ctrl+V produced nothing at all: no
image, no error, no hint that anything was missing.
The darwin path already knows the difference. It probes with `clipboard info`
first and only reaches the extraction step once the clipboard is confirmed to
hold an image, so a failure there is not absence, it is "there is an image and
nothing here can read it". That now returns ErrClipboardImageUnreadable, which
the existing error path turns into a transcript notice naming what to install.
The defect predates this branch, but this branch is what makes the path
reachable from Ctrl+V, so shipping without it would close#534 with a feature
that is inert on one of the three platforms. Raised by gnanam, who measured it
on a real Mac rather than inferring it.
Deliberately narrow. The Linux arm cannot tell "no tool" from "no image"
without probing separately, and Windows uses PowerShell, which is always
present, so neither is touched.
The test drives the whole path: stubbed reader returns the error, Ctrl+V
issues the probe, and the assertion is that the failure reaches the transcript
as an error row rather than stopping earlier. Swallowing the error again makes
it fail.
* test(imageinput): cover the darwin unreadable-clipboard decision itself
The test added with the fix asserted around the change rather than on it. It
substituted ReadClipboardImage with a stub returning the error, which proves
the TUI surfaces an error handed to it, but never reaches
readClipboardImageDarwin, where the decision lives. Reverting both production
return sites to nil,nil left every package green, which is the definition of a
test that is not testing the change. Caught by gnanam.
readClipboardImageDarwin shells out twice and had no seam, so the two steps are
now package-level vars, the same shape as the readClipboardImage var this
change already relied on. That makes the case that matters reachable: the info
probe succeeds and reports an image, and the extractor then fails. It cannot be
arranged from outside the function, because from there both steps are one
opaque call.
Five cases, and the negative ones carry as much weight as the positive. An
image with no working extractor, and an extractor that exits 0 with no bytes,
must both be actionable. A clipboard offering no image, and a failing info
probe, must both stay silent, because turning those into a notice would make
every stray Ctrl+V nag the user. The extractor must not run at all in either
silent case.
Repeating gnanam's experiment now fails: reverting both return sites to nil,nil
fails the two actionable cases and leaves the silent ones passing, which is
exactly the discrimination the fix is supposed to add.
* fix(sandbox): preserve user config and retry denied writes
Keep user identity and configuration paths discoverable while retaining managed cache and temporary storage. Classify native sandbox failures as typed recoverable denials so approved commands can retry outside the sandbox.
Add regression coverage for global Git ignores, typed denial handling, and permission retry behavior.
* fix(sandbox): tighten denial retry safeguards
* test(sandbox): assert denial contract
* fix(sandbox): trust typed denials and restore Cargo state
Stop promoting command output keywords into recoverable unrestricted denials, so only structured adapter facts can enter the approved unsandboxed retry path.
Restore the managed CARGO_HOME directory and environment override so Cargo remains writable while the caller's real home stays read-only.
* fix(sandbox): mask preserved credential configs
Preserving caller configuration made credential-bearing tool files discoverable under Linux's read-all sandbox profile. Add default and environment-overridden npm, GitHub CLI, netrc, Docker, Kubernetes, and Zero config paths to the credential deny set, with regression coverage.
Clarify the typed-denial retry and platform read-model comments without changing the approval behavior.
* fix(sandbox): protect custom gcloud config
CLOUDSDK_CONFIG can relocate gcloud credentials outside the XDG-derived default. Include the configured directory in the credential deny profile and cover the override with a regression test.
* fix(sandbox): deny zero credential directory
* test(sandbox): keep zero credential directory deny path expectations
* fix(windows): prefer PowerShell for command execution
Detect PowerShell 7 or Windows PowerShell before falling back to cmd.exe, and share the selected host shell across agent tools and the interactive shell escape.
Configure UTF-8 output, preserve restricted-sandbox MSYS safeguards, and add Windows coverage for pipelines, workspace writes, and interactive stdin sessions.
* test(windows): align shell coverage with PowerShell
Make Windows command fixtures and guidance assertions follow the selected host shell, preserve cmd fallback coverage, and use a genuine MSYS executable when PowerShell aliases are available.
Remove the unsupported non-TTY PowerShell stdin assertion; Windows interactive stdin requires a separate PTY transport.
* fix(sandbox): classify Windows executable suffixes
Normalize .exe, .cmd, .bat, and .com command names before safety and network lookup so PowerShell invocations such as curl.cmd receive the same network permission handling as curl.
Add analyzer and engine-level regressions for the Windows PowerShell command shape observed in CI.
* fix(sandbox): normalize absolute Windows command paths
Extract drive-letter and UNC basenames before removing shell escape characters so fully qualified Windows executables continue matching canonical safety and network classifications.
Cover both drive and UNC curl paths with analyzer regressions.
* fix(sandbox): normalize relative Windows paths
Recognize drive-relative, explicit relative, and suffixed backslash executable paths before generic shell escape removal so Windows commands continue to match canonical sandbox risk entries.
* fix(windows): harden PowerShell execution
* fix(sandbox): classify PowerShell removal aliases
* test(cli): order the prewarm probe against the turn
TestRunExecOptimizedSessionUnderGate intermittently sees zero prewarm HEAD
probes on the Windows runner. It polled for up to 5s after the run returned,
reasoning that the deadline exceeded the 3s prewarm timeout so a slow probe
could not flake it. That reasoning does not hold. The probe is issued on the
run's context and runExec cancels that context as it returns, because the stop
function signalContext hands back is a CancelFunc. Once the run is over the
probe is cancelled rather than slow, so polling cannot observe one that has not
already landed, at any deadline.
Against a mock server the turn finishes in microseconds, which leaves the probe
racing teardown. The turn now blocks until the probe arrives, giving it a
window while the run is still alive. The wait is bounded, so a probe that never
fires still fails the assertion with a useful message.
This widens the window rather than closing it: prewarmTimeout is armed inside
the probe goroutine, so holding the turn cannot extend it. The comment says so,
and names prewarmTimeout as the thing to look at if this ever recurs.
* test(cli): fail when the prewarm hold gives up
The bounded wait let the turn proceed after its guard expired, so a probe that
arrived late still left the count at 1 and the test passed. That proves the
probe was eventually received, not that it preceded the turn, which is the only
thing this test claims. Raised by CodeRabbit.
The expiry is now recorded and checked before the count, since the count cannot
tell the two apart.
Verified by suppressing the probe, which makes the guard expire: the assertion
fires with its own message rather than the count assertion, and the run takes
the full guard duration.
* fix(sandbox): add platform-specific write lock around grant state file (#752)
Add grants_lock_unix.go and grants_lock_windows.go with a lockStateFile
method that serializes access to the persisted grant state across
processes. Wire the lock into Grant, GrantCommandPrefix, Revoke,
RevokePath, and Clear.
Also add .gitattributes to force LF line endings for Go files so
gofmt checks pass on Windows.
Generated with [Devin](https://devin.ai)
Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>
* fix(sandbox): do not lock the grants file when there is no notice to consume
Addresses jatmn's #755 finding.
ConsumeMigrationNotice took the interprocess lock unconditionally, and
lockStateFile MkdirAlls the grants directory and creates
<grants>.lockfile. Every startup and every 'zero exec' calls this, so it
turned reading the grant state into requiring a WRITABLE grants
directory: a user with no grants file whose ZERO_SANDBOX_GRANTS_PATH (or
its parent config directory) sits on a read-only mount failed outright
with 'failed to migrate sandbox grants', where the pre-lock code read an
empty state and wrote nothing.
Peek at the state without the lock first and return early when no
migration write is required. Only when one is — a schema/policy
migration, or clearing NoticePending — take the lock and re-read under
it, since the unlocked peek is a snapshot another process may have
already consumed or migrated, and is meaningless by contract when
needsMigration is set.
Both regression tests are verified to fail against the pre-fix code.
The read-only-directory test skips on Windows (mode bits do not deny
writes) and as root (permissions are bypassed), so a portable companion
asserts the same requirement by requiring that nothing is created at
all.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
---------
Co-authored-by: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
* fix pinned Go quality toolchain
* fix(make): use a POSIX GOTOOLCHAIN prefix for pinned tool targets
The Windows_NT branch used cmd.exe syntax (set "..." &&), but GNU Make
runs recipes through sh even on Windows (MSYS/Git Bash), where that
form fails and breaks make lint-static/deadcode/vulncheck. A plain
GOTOOLCHAIN=... prefix works everywhere, so the OS check is gone.
Also switch GO_VERSION/GO_TOOLCHAIN to recursive expansion so
'go list -m' only runs when a tool target actually needs it, instead
of at parse time for every target. Addresses PR review from CodeRabbit
and Copilot.
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(build): make pinned-tool targets shell-neutral, fix README drift
Address code review on PR #689:
- lint-static/deadcode/vulncheck previously set GOTOOLCHAIN via a
POSIX `VAR=value cmd` recipe prefix. GNU Make on Windows runs
recipes through whatever SHELL is configured, and under a native
cmd.exe setup that syntax is invalid — cmd.exe treats the whole
"GOTOOLCHAIN=go1.26.5" token as the program to run and fails before
go ever executes (reproduced locally: cmd.exe errors with
"'MYVAR' is not recognized..." for the equivalent pattern). Switched
to a target-specific `export`, which sets the variable in the child
process environment via Make itself, before is invoked —
works under sh, cmd.exe, and PowerShell alike (verified against all
three targets with SHELL := cmd.exe).
- README.md's Code Quality and Security Checks section still told
contributors to run the raw `go run ...@version` commands this PR
identifies as selecting the wrong (older) toolchain and failing to
load this Go 1.26.5 module — only CI and AGENTS.md had been updated
to the new make targets. Points steps 3-4 at `make lint-static` /
`make vulncheck` instead, matching AGENTS.md.
Verified end-to-end: `make vulncheck`, `make deadcode`, and `make
lint-static` all run successfully and reach their tools (deadcode's
advisory report and lint-static's 35 pre-existing findings match the
PR's documented baseline).
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(build): support stock macOS make
---------
Co-authored-by: Claude Fable 5 <[email protected]>
Both background-child tests fail intermittently on the Windows runner, and
have since #690. #800 and #802 each relaxed an assertion, which is why neither
held: the deadline itself was the problem.
The tests drove LoadProviderCommand, so the fixture's own startup was billed to
the production 5s budget. On a loaded runner the outer timer won the select in
runProviderCommand, and both symptoms follow from that. The nonzero-exit test
saw a timeout instead of the exit status it asserts, because the timer
preempted the shell's exit. The other test lost its PID file, because the
timer's Terminate killed the background child before it could record a PID,
putting the file permanently out of reach however long the assertion polled.
Neither test is a claim about the 5s budget. They assert which error each
cmd.Wait path yields and that the leftover descendant is killed, so they now
call runProviderCommand directly with a budget of their own and the production
deadline stops competing with process startup. Making the child outlive that
budget lets both drop their elapsed-versus-lifetime bounds as well, so no
wall-clock assertion is left in either test.
That is only worth doing if the two timeout paths can be told apart, and they
could not: the WaitDelay path and the outer-timer path both returned the same
bare sentinel, so asserting on it would have been satisfied by the very timeout
the tests exist to rule out. The WaitDelay path now wraps rather than replaces.
Callers asking errors.Is for the sentinel are unaffected, so no user-visible
message changes.
The Windows fixture also waited for its ready marker by launching a second
PowerShell. That cold start is pure overhead added after the PID is already
written, so the wait now runs in cmd itself and is bounded.
Verified by looping both tests under CPU contention: 7 failures in 16
iterations before, none in 32 after, with per-iteration time going from a
spread of 2.3s to 66s down to a steady 2.1s. Removing the wrap makes the
WaitDelay assertion fail, so it is load-bearing rather than decorative.
Mirror plugin info: compare on-disk SKILL.md to the skills.lock hash so
edited installs are visible. Also drop the nonexistent skills lock
command from EXTENDING.md.
New turns inherited lastStreamActivity from the prior turn, so a fresh request could immediately look stalled. Initialize stream activity from the same timestamp as turnStartedAt and cover the stale-clock case with a deterministic regression test.
Cold PowerShell startup under concurrent Windows CI can consume most of the provider timeout, so an unsynchronized PID file may never be written and a fixed four-second bound can fail despite correct process-tree cleanup. Treat an absent PID as a helper that never reached startup, retain strict liveness checks for synchronized children, and bound completion by the child's natural lifetime instead.
* chore: remove code unreachable on every supported platform
The Security and code health job's advisory deadcode step reports 152
unreachable functions on main. Running the same check under GOOS=linux,
windows, and darwin shows 13 of those are false positives whose callers
live in windows build-tagged files, so only functions unreachable on all
three platforms are touched.
Functions with no references anywhere are deleted, including the
internal/reasoning package, which nothing imports. Functions that only
tests reference move into per-package export_test.go files so tests keep
their seams while the production binary sheds the code. Test call sites
of deleted convenience wrappers are ported to the live APIs (scoped tool
constructors, tools.DeferredSource, FinishReason checks).
Kept despite the report: cron.Store.Runs (only reader of runs.jsonl,
which production writes), and agenteval.TraceEventKeys and
MissingTraceEvents (used across packages by the trace contract test).
* docs(config): correct ValidateFile's errors.As claim
Message is a flattened string (.Error() already called on the parse
error), not a wrapped error, so callers can't recover the concrete
json error type via errors.As. Fix the comment to match.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* chore(trace,skills): drop obsolete Sink adapters and fix stale doc references
The dead-code pass removed the Emit methods but left Sink, NDJSONSink, and
TextSink exported with a contract nothing implements; remove the types with
their contract. Also remove the stray blank line at EOF of trace.go flagged
by gofmt, and update skills package docs and HOW_ZERO_WORKS.md to stop
directing callers to DiscoveryRoots/Duplicates, which are now test seams.
Co-Authored-By: Claude Fable 5 <[email protected]>
* chore: clean up remaining review nits on dead code removal
Replace a pointless fmt.Errorf(...%w...).Error() with fmt.Sprintf
using %v, since the wrapped error was discarded immediately anyway.
Remove a comment block that was duplicated verbatim.
* docs(skills): drop remaining references to test-only List/Get
Load and MergedSkills comments still named List/Get as production
entry points after they moved to export_test.go. Point callers at
Load and ListFromRoots instead.
* chore: remove now-unreferenced export_test.go seams
execSessionManager.len() and likelySandboxDenied/sandboxDenialKind had
no remaining callers after the sandbox unify-command-execution rebase;
the production code they wrapped for tests no longer exists.
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
* fix(config): kill provider-command process tree via job object on Windows
taskkill /T walks the process tree by parent PID in user space and can
miss descendants, leaving the sleeping child holding the inherited
stdout/stderr pipes so cmd.Wait() blocked until natural completion
(~10s instead of the 5s timeout).
Assign the started command to a job object with
JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE and terminate the job on timeout so
the kernel kills the whole tree atomically; taskkill remains as a
fallback. Also set cmd.WaitDelay so Wait can never hang on pipes held
by an escaped orphan, and add a regression assertion that the sleeping
child is actually gone after the timeout returns.
Fixes#683
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(config): harden provider-command tree termination
Address code review on PR #690: terminate the process tree when
cmd.Wait() returns exec.ErrWaitDelay (a background descendant kept
inherited pipes open, previously left running); start the Windows
process suspended and assign it to the job object before resuming its
main thread, closing the window where a fast child could escape the
job; drop JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE so a successful command's
detached helpers survive Close() instead of being reaped; escape
single quotes in generated PID-file paths; and correct a misnamed
Windows exit-code constant in a comment.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(config): avoid gofmt smart-quote rewrite in doc comment
gofmt's doc-comment formatter rewrites a trailing '' into a curly
closing quote, which CI's gofmt -l check flags as unformatted. Reword
to avoid the pattern instead of embedding a raw quote pair.
* fix(config): terminate leaked descendants on nonzero exit, avoid PID reuse
Terminate the process tree on any error returned from cmd.Wait, not only
exec.ErrWaitDelay. Go only returns ErrWaitDelay when the shell itself
exited successfully; a nonzero exit (e.g. sleep 600 & exit 7) yields the
bare *ExitError instead, so a detached background child that held the
inherited pipes open was never terminated on that path.
Also stop falling through to the taskkill/PID fallback once a job handle
successfully contained the tree: by the time Terminate runs on the
ErrWaitDelay path, cmd.Wait has already reaped the root process, so its
PID may have been reused by an unrelated process, and taskkill /T /PID
against a reused PID would force-kill the wrong tree.
Addresses PR #690 review feedback.
* fix(config): surface suspended-thread resume failures instead of hanging
resumeMainThread now reports whether it actually resumed at least one
thread. If Toolhelp/OpenThread/ResumeThread all fail, the launched
process would otherwise sit suspended forever, never exit on its own,
and get misreported as a plain 5s provider-command timeout instead of
the real resume failure. attachCommandProcess now terminates the
process immediately in that case.
Also documents the known, non-regressive limitation that the taskkill
fallback (used only when job creation/assignment itself fails) can
still miss a descendant that has reparented away from the tree it
walks by PID.
Addresses remaining PR #690 review feedback; PR description corrected
separately to drop the outdated JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE claim.
* fix(config): guard taskkill with retained process identity
* fix(config): retain POSIX process group identity
* test(tui): match provider wizard shortcut
* test(tui): pin credential-step env for deterministic footer assertion
The credential step's footer only shows the /→ shortcut once a key
is present, whether typed or inherited from the provider's
AuthEnvVars. The previous commit changed the assertion to
"Enter/→ continue" without accounting for that, so the test only
passed by coincidence when ANTHROPIC_API_KEY happened to be set in the
environment — failing deterministically on a clean CI runner (as
smoke reported on all three OSes). Pin the env var empty and assert
the no-key footer text so the test is correct regardless of ambient
environment.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(config): preserve provider process attributes
* test(config): keep SysProcAttr coverage portable
---------
Co-authored-by: Claude Fable 5 <[email protected]>
* fix(tui): disable bubbletea hard scroll optimization unconditionally
Vendors a patched charm.land/bubbletea/v2 (via a local go.mod replace)
with hard scroll optimization (using terminal scroll-region sequences
to shift existing lines instead of repainting) disabled unconditionally,
instead of only on GOOS=="windows".
That GOOS check only catches a Windows terminal driving the program
directly. It misses a Linux process running inside a multipass VM
whose output is ultimately displayed by Windows Terminal over a
remote shell, which corrupts rendering badly (garbled/overlapping
text, worse on resize) the same way the check exists to prevent.
There's no reliable way to detect that remote hop from inside the VM,
so scroll optimization is now off in all cases.
* fix(tui): force redraw on streamed newlines to clear stale caret
The streaming caret (appendStreamingCursor) is appended to whichever
visual line is currently last. Over a remote terminal chain
(multipass VM output displayed by Windows Terminal), the renderer's
incremental cell diff sometimes fails to clear the caret's old cell
when a newline moves it to a new line, leaving ghost carets behind.
Fire tea.ClearScreen when a streamed delta contains a newline: that's
exactly the moment the caret moves and the risk exists, so it forces
a full redraw right then instead of leaving it to the incremental
diff, without doing so on every animation tick.
* chore(tui): trim upstream repo metadata from vendored bubbletea fork
The vendored bubbletea-v2-patched module is ~99% byte-identical to
upstream charm.land/bubbletea/v2 v2.0.8; only cursed_renderer.go
differs (one line disabling hard scroll optimization). The .github
workflows, README.md, UPGRADE_GUIDE_V2.md, Taskfile.yaml and CI config
files are upstream repo metadata that serve no purpose inside this
repo, so remove them to slim the PR. The Go source and testdata golden
files are kept because Go's replace directive requires the full module
to be present and buildable.
Refs #709
* fix(tui): address review round on the rendering workaround and vendored fork
Fork correctness fixes (all flagged by review):
- key.go: KeyMediaRecord repeated the previous const expression and
decoded record presses as previous-track; map it to uv.KeyMediaRecord.
- mouse.go: MouseButton11 likewise collapsed onto MouseButton10.
- termios_unix.go: BSDLY/BS0 are output-delay bits; read them from Oflag
instead of Lflag so useBackspace is set correctly.
- cursed_renderer.go: count wrapped rows with (lineWidth-1)/w so an
exact terminal-width multiple no longer inserts a blank line; compare
colors by normalized RGBA via a nil-safe helper instead of interface
equality (which panics on non-comparable implementations); and make
clearScreen invalidate lastView so the queued erase flushes with the
next frame instead of deferring until an unrelated view change — the
reordering that could leave the ghost caret in place.
- exec_test.go: implement reset() on the spy renderer and inject it
before Run; assert exec preserves renderer state (releaseTerminal
with reset=false).
- logging_test.go: restore the default logger's output/prefix/flags and
fail fast on setup errors.
- tea_test.go: tie the Quit-pumping goroutine to a channel closed when
Run returns instead of leaking it until process exit.
TUI scoping (review P2): the forced redraw on streamed newlines is now
rate-limited to ~10/s so heavy streaming output no longer turns every
newline into a full-screen repaint, and ZERO_NO_STREAM_CLEAR=1 opts a
correctly-rendering terminal back into the fast incremental path.
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(tui): guarantee deferred stream-clear redraw and other review fixes
A throttled stream-clear could drop the redraw entirely when a
newline arrived in the last delta of a turn, leaving a ghost caret on
screen. Add a one-shot deferred flush timer plus a flush on stream
end. Fix a stale comment and a test that leaked global logger state
in the vendored bubbletea fork.
* fix(tui): use m.now for stream-clear throttle and harden tests
Drive stream-clear rate limiting through the mockable clock and a
shared streamClearThrottle constant so both the agentTextMsg and
flush paths stay in sync. Add an explicit two-newline-within-window
regression and detect ClearScreen by function pointer so tests do not
evaluate Tick side effects.
* fix(tui): relocate bubbletea fork out of third_party
Move the maintained bubbletea/v2 hard-scroll patch from
third_party/bubbletea-v2-patched to patches/bubbletea-v2 and update the
root go.mod replace. third_party/ is immutable vendored content per
AGENTS.md; a maintained fork belongs outside that tree.
* fix(ci,docs): run vendored bubbletea fork tests and document unsupported go install path
patches/bubbletea-v2 is its own Go module so `go test ./...` from the repo
root never touched its 7 test files. Add a CI step (and a make test-patches
target for local use) that runs the fork's own suite across the smoke
matrix.
The root go.mod's local `replace charm.land/bubbletea/v2 =>
./patches/bubbletea-v2` also breaks `go install
github.com/Gitlawb/zero/cmd/zero@<version>`, since a versioned install can't
resolve a replace pointing at a filesystem path. Document that path as
unsupported in README.md and docs/INSTALL.md and point at git clone + go
build instead, per jatmn's review findings on PR #709.
* ci: run vendored bubbletea fork tests with -race
CodeRabbit review on this PR. The fork exists specifically to patch a
concurrency bug (charmbracelet/bubbletea#1690), so its regression test
needs the race detector to actually catch a reintroduced race instead
of just passing on a benign-looking run.
* fix(tui): drop vendored bubbletea fork; keep stream-clear workaround
Maintainers asked not to ship an in-tree bubbletea replace: it breaks
versioned go install and is a large maintenance surface for a narrow
multipass/Windows Terminal scroll bug. Remove patches/bubbletea-v2 and
the replace directive; keep the model.go full-redraw-on-streamed-newline
workaround (ZERO_NO_STREAM_CLEAR to opt out). Restore normal install docs.
Refs Gitlawb/zero#709
---------
Co-authored-by: Claude Fable 5 <[email protected]>
* fix(cron): reserve job IDs atomically
* fix(cron): hold the per-ID lock from reservation through persistence
Address code review on PR #686: reserveID made the timestamp directory
visible via os.Mkdir before metadata.json existed, but Remove (which
takes the per-ID lock before deleting) never coordinated with that
window. A concurrent `zero cron rm <id>` could delete the bare
reservation and report success right after Add reserved it; writeJob's
MkdirAll would then silently resurrect the directory and persist the
job anyway. A second Add could also re-reserve the same id while the
first writer was still running, putting two writers on the same
metadata path.
reserveID now acquires the same per-ID lock (used by Get/Update/
Mutate/Remove/AppendRun) for each candidate id before attempting
os.Mkdir, and returns it still held; Add releases it only after
writeReservedJob commits (or tears down) the reservation. A concurrent
Remove for that id now blocks until the reservation is resolved one
way or the other, and a concurrent Add attempting the same candidate
id serializes through the lock rather than only racing the Mkdir.
Adds two regression tests: one proving Remove waits for and removes
the committed job rather than the bare reservation, and one proving a
second reserveID call for the same candidate id blocks on the shared
lock and moves on to the next candidate.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
* feat(plugins): add zero plugins info command
Add plugins info to inspect manifest state, extension counts, and
lockfile source/hash with optional hash drift detection.
* fix(plugins): derive lock dir from plugin install path for info
Remove LockDir from InfoOptions and read the lockfile from
filepath.Dir(plugin.PluginDir) so lock metadata matches the resolved
plugin location. Consolidate duplicate lock hash output lines.
* Add shell completion generation
Add zero completions for bash, zsh, fish, PowerShell, and Elvish using one shared command tree that covers aliases, nested commands, root flags, and common exec flags.
Validate missing and unsupported shell arguments as usage errors and document safe installation examples in command help.
Refs #499
* Complete shell target suggestions
Expose every supported shell as a completions subcommand candidate and document Elvish activation.
Refs #499
* Fix Elvish completion syntax
Close generated Elvish conditional branches, use value equality, and validate generated script structure plus native Bash and Zsh syntax.
Refs #499
* feat(sandbox): unify command execution and enforcement
* test(sandbox): make platform contracts portable
* fix(sandbox): close execution lifecycle races
Bound retained interactive output, preserve interruption state, and start workspace observation before process launch.
Protect active runtime roots with cross-platform leases, capture transient protected-path creation events, and restore process attributes after PTY fallback.
* fix(sandbox): restore strict macOS isolation
Remove Seatbelt host-local network allowances after native validation showed localhost filters can reach host interfaces.
Track process reap completion so retained sessions cannot signal a stale numeric PID.
Closes#721.
`zero providers use <name>` wrote activeProvider to config.json and reported
"Active provider set to <name>" even when ZERO_PROVIDER was set, which applyEnv
makes win over config.json unconditionally. So the switch was reported as a
success while `providers current` still showed the env-pinned provider, a silent
no-op.
Detect the override and say so: the text path prints a note to stderr naming the
env var and the provider that stays active, and the --json path adds
effectiveProvider / overriddenByEnv fields so a machine consumer is not misled
either. The config write still lands unchanged; only the reporting is honest.
The env read is injected via a new appDeps.getenv (os.Getenv in production, left
nil by fillAppDeps like exportActiveProvider) so tests stay hermetic against an
ambient ZERO_PROVIDER. The related env-derived-profile "not found" case the issue
also mentions is already handled by the unpersisted-provider path (#707) and #716.
* fix(lsp): make the real-gopls check opt-in so a broken gopls can't fail the suite
Closes#684.
TestManagerCheckRealGopls skipped only when gopls was absent from PATH, so an
installed-but-unhealthy gopls (e.g. an unusable persistent-index cache that makes
the server exit during initialization with EOF) failed `go test ./...` for every
developer who merely had gopls on PATH.
Gate it behind ZERO_GOPLS_INTEGRATION, matching the repo's other real-server
opt-ins (internal/dictation smoke tests). The default hermetic suite keeps its
coverage on the fake server and never touches the developer's global gopls; the
real check still runs on demand with ZERO_GOPLS_INTEGRATION=1.
* test(lsp): require ZERO_GOPLS_INTEGRATION=1 exactly, so =0 keeps the check off
Closes#728.
The Windows ACL setup resolved each target's pathname independently across
os.Stat, GetNamedSecurityInfo, and SetNamedSecurityInfo (and again on rollback),
so during elevated setup a lower-privileged local user could swap a target for a
symlink/junction between operations and redirect the ACL change onto a system
object the process never validated. That is a TOCTOU across a privilege boundary.
Open each target once with a no-follow handle (FILE_FLAG_OPEN_REPARSE_POINT plus
FILE_FLAG_BACKUP_SEMANTICS, READ_CONTROL|WRITE_DAC) and drive both the read
(GetSecurityInfo) and the write (SetSecurityInfo) through that one handle, so they
hit the same kernel object. isDir is read from the same handle rather than a
separate Stat. A target that resolves to a reparse point is refused outright,
since a setup target that is a symlink/junction during elevated setup is the
swap-attack signature. Rollback re-opens no-follow rather than restoring by
pathname; the residual window is small because the target is ACL-restricted by
then, and one caller discards the rollback closure so handles are not retained for
the whole sandbox lifetime.
Tests (windows-tagged, no elevation needed): the handle-based apply plus rollback
round-trip on a user-owned temp dir, the materialize-and-remove path, reparse
rejection via a junction (needs no admin, so it runs in CI), and the not-exist
mapping. The full privilege-boundary race can't be reproduced in CI, so the guard
is verified structurally (one handle for read and write) and by junction rejection.
Documents expectations for keeping contribution flow sustainable during the
stabilization phase: one issue per bug (no bundled multi-finding audits), keep
only a few items open at a time, and hold AI-assisted contributions to the same
per-item verification bar. Complements the existing issue-approved gate, which
already covers PR-to-issue linkage and scope; the gap was submission volume.
* feat(tui): let the permission prompt take free-text feedback inline
"No, and tell Zero what to do differently" now opens an inline input on the
permission card instead of silently cancelling: type an instruction, Enter sends
it, Esc returns to the option list. The text is delivered as a Deny decision whose
Reason is the typed instruction, so the agent surfaces it via deniedPermissionResult
as the tool result and the model adjusts in the SAME turn — where the old cancel
returned an error and aborted the run. Empty input + Enter falls back to a plain
cancel (the prior meaning).
No agent-side change: PermissionDecision.Reason already carries free text to the
model. The UI mirrors the ask_user "type your own answer" pattern — the feedback
field reuses the shared composer input and the card renders it in the transcript
body.
Also: a focused permission prompt now suppresses the composer (and idle
hints/plan panel), keeping only the status line, exactly like the ask_user modal.
Its keys are inert anyway, so a "describe a task for zero…" box below the card was
misleading — and in feedback mode the shared input would otherwise echo in two
places.
Tests cover open / submit-as-Deny-with-text / empty-cancels / Esc-returns, the
composer suppression in both modes, and that the feedback text renders exactly
once.
* fix(tui): preserve the composer draft across permission feedback (#780 review)
anand + CodeRabbit (Major): entering feedback mode cleared the shared composer
input via SetValue(""), and neither submit nor cancel restored it — so a user
with a half-typed or queued next-turn message who chose "tell Zero what to do
differently" lost that draft.
Snapshot the composer value into pendingPermissionPrompt.savedDraft when feedback
mode opens, and restore it on BOTH exits (submit and Esc-cancel). Only the
feedback text is consumed, delivered via the decision Reason. Adds regression
tests for both paths; mutation-verified against the SetValue("") regression.
* fix(tui): guard permission-feedback backspace and clicks (#780 review)
Vasanthdev2004 review, all on the permission path:
1. Real bug: Backspace on an empty feedback field dropped a staged attachment.
The keyBackspace case runs before the typing branch and, on an empty composer
(feedback mode clears it), fell to removeLastAttachment — silently dropping a
staged image/doc that savedDraft does not restore. Route Backspace to the
shared input while typing so it is a plain edit of the feedback text.
2. Defence-in-depth: the mouse click resolver in handleTranscriptSelectionMouse
resolved a clicked permission option (Allow included) with no typing check. It
is safe today only because renderFocusedPermissionPrompt returns nil clickable
offsets in feedback mode — a single early-return in a function other PRs also
edit. Add an explicit !typing guard on the click path so the safety is stated,
not emergent.
3. Test hardening (also raised by CodeRabbit): assert len(got) == 1 before
indexing got[0] in the draft-preservation test, so a regression fails cleanly
instead of panicking.
Tests: TestPermissionFeedbackBackspaceKeepsStagedAttachment (mutation-verified
against the missing guard) and TestPermissionFeedbackRendersNoClickableOptionsWhileTyping.
---------
Co-authored-by: KRATOS <[email protected]>
* fix(tools): read_file recovers a backwards line range instead of erroring
renderReadFileRange hard-failed when end_line < start_line, costing the caller a
whole retry for an arithmetic slip. It was also inconsistent: start_line past EOF
returns a friendly note and end_line past EOF is auto-clamped to the last line —
only a backwards range hard-errored.
Recover it the same way: clamp end_line UP to start_line (read just that line) and
surface the adjustment in the output so it is never silent. Valid ranges
(end_line >= start_line) are byte-for-byte unchanged.
The change is in the argument-validation phase, before any file I/O, so there is
no runtime cost; if anything it saves the agent a wasted retry turn.
Tests: TestReadFileToolRecoversBackwardsRange (recovery + note + reads only
start_line, mutation-verified against the old hard error) and
TestReadFileToolValidRangeUnchangedByRecovery (valid ranges carry no note and read
the identical window).
* test(tools): assert full valid-range output in read_file recovery test (#779 review)
anand + CodeRabbit: TestReadFileToolValidRangeUnchangedByRecovery claimed
byte-for-byte preservation but only checked substrings, so an altered
header/separator or a stray out-of-range line would still pass. Compare the
whole result.Output against the exact expected rendering.
---------
Co-authored-by: KRATOS <[email protected]>
The focused permission prompt was the only prompt card in the TUI that used
brand/warning colours for its interior, and both read badly on cool themes such
as dracula:
1. The selected option ("Yes, proceed") was filled with zeroTheme.badge — the
brand chip meant for short labels (" 0 ", " ASK ", " SPEC REVIEW "), a
full-brightness accent fill. Every other selectable list in the TUI (model
picker, provider list, / palette) highlights its selected row with onSel/selBg
instead. The permission card was the outlier, painting a saturated accent slab
across the row and skipping the card tint every other line composed onto.
2. The card BODY was tinted with permBg, an amber-family wash intended to signal
a warning surface. It works on the warm default palette but renders as a
brown-yellow slab over cool themes, and it made the permission card the only
prompt whose body carries a fill — ask_user, spec review and plan all use a
transparent body (lipgloss.NewStyle()).
Fix both to match the rest of the TUI: the selected row uses onSel(ink) like
every other picker, and the body drops its permBg fill for a transparent one.
Warning identity is unchanged — the amber PERMISSION badge and the amber-mixed
border still mark it as a permission gate; only the clashing interior fills go.
TestFocusedPermissionSelectedRowUsesSelectionTintNotBrandChip asserts against
palette entries (not hardcoded hex, so it survives a theme retune): the selected
row carries selBg and not the brand accent, the body carries no permBg wash, and
the PERMISSION badge keeps its amber fill so the card still reads as a warning.
Co-authored-by: KRATOS <[email protected]>
* feat(sandbox): disable the sandbox via config (#687)
Add a sandbox.enabled field (`"sandbox": {"enabled": false}`). ModeDisabled
already short-circuits the engine but had no config surface.
- SandboxConfig.Enabled *bool (pointer distinguishes an explicit false from an
omitted key).
- mergeConfig honors it (global config / CLI); applyConfiguredSandboxPolicy maps
enabled:false to ModeDisabled.
- mergeProjectConfig intentionally does NOT merge it: a cloned repo must not be
able to disable the sandbox that constrains it — same posture as
AdditionalWriteRoots and the Network tighten-only rule.
* fix(config): honor sandbox.enabled from the CLI override path (#687 review)
applyOverrides copied BlockUnixSockets/MonitorDenials but not the new Enabled
tri-state pointer, so a CLI/programmatic Overrides{Sandbox:{Enabled:&false}} was
dropped — contradicting the 'global config / CLI can disable' contract. Preserve
the pointer in applyOverrides (runs after all config sources, so an explicit
override wins) and add a resolver regression test: an explicit false override
disables, and an explicit true override wins over a lower-precedence config false.
* fix(config): keep sandbox.enabled out of the provider-command path (#687 review)
mergeConfig now copies Sandbox.Enabled, and it is shared by two callers: the
global-config merge (trusted) and the provider-command merge (not). A provider
command is an arbitrary executable named in config, and LoadProviderCommand
parses its stdout into a full FileConfig -- so one returning a valid provider
plus {"sandbox":{"enabled":false}} could disable the sandbox meant to constrain
it, despite the setting being documented as global-config/CLI only. Confirmed
reproducible in both directions before the fix.
Clear Sandbox.Enabled from the provider-command config before merging, mirroring
the carve-out mergeProjectConfig already applies for the same reason. Done at the
call site rather than inside mergeConfig because that helper must keep honouring
the setting for the trusted global-config merge.
Adds TestResolveSandboxEnabledIgnoredFromProviderCommand covering both
directions (cannot disable, cannot enable) and asserting the provider itself is
still applied, so the guard cannot be satisfied by dropping the command wholesale.
---------
Co-authored-by: KRATOS <[email protected]>
* fix(sandbox): AST second opinion for interactive-command bypasses (#473)
The interactive-command guard split shell commands with a hand-written parser
(splitShellSegments), which mis-handles unusual quoting, command substitution,
subshells, and newline separators — an interactive program hidden by one slips
through and the agent hangs until the per-command timeout.
Add astCommandFields(): mvdan.cc/sh/v3/syntax (already used by analyzer.go) to
re-extract the real simple commands, then apply the SAME per-program checks the
regex path uses (interactivePrograms + hasNonInteractiveFlag). This only ADDS
detections and classifies every program exactly as before — ssh with a trailing
command, python -c, etc. stay allowed — while catching the splitter's bypasses.
Unparseable input (Windows cmd.exe, obfuscation) yields no commands and falls
through to the regex path; the guard never hard-blocks on a parse error.
* fix(sandbox): AST pass runs the full pipeline + guards dynamic programs (#473 review)
Address review on #745:
- The AST second opinion now applies the complete detection pipeline via a new
inspectCommandFields helper (multi-word interactive segments, sh -c payload
recursion, then the per-program lookup), so parser-hidden bypasses like
{ git rebase -i HEAD~1; } and { sh -c 'vim file.txt'; } are caught, not just
bare interactive programs.
- astCommandFields now skips a CallExpr whose program word is not a static
literal (isLiteralWord), so a substitution concatenated with a literal
($(printf foo)vim -> foovim) can't fabricate an interactive program name.
Regression tests added for both boundaries. (The un-braced $(printf foo)vim
false positive is a separate, pre-existing hand-parser behavior — present on
main before this PR — and is out of scope here.)
* fix(sandbox): require literal words for the whole AST call (#473 review)
astCommandFields guarded only the program word, then ran every argument
through wordText, which keeps literal/quoted parts and silently drops
CmdSubst/ParamExp. A dynamic ARGUMENT was therefore reconstructed lossily:
`git $(printf foo)rebase -i HEAD~1` runs as `git foorebase -i` (a
non-existent, non-interactive subcommand) but collapsed to `git rebase -i`
and was blocked -- a false positive on a command the user never wrote, and
new on this branch (the base correctly reports not-interactive).
Extend the literalness guard to every word in the call: if any word carries
an expansion, skip that AST command rather than classify a reconstruction
whose runtime value is unknowable. Skipping is the safe direction -- the
hand-written passes still run first, and a miss falls through to the normal
permission prompt instead of hard-blocking.
Genuine detection is unchanged: `git rebase -i HEAD~1` and the #473 bypass
cases still classify exactly as before.
---------
Co-authored-by: KRATOS <[email protected]>
* fix(tui): label model rows by id when the description is prose
The model picker (provider wizard AND onboarding, which share displayLabel)
labelled each row with the provider's Description, falling back to the ID only
when the description was "generic". That is right when Description holds a short
display name -- "Grok 4.3" for x-ai/grok-4.3, which is what the field is for and
why the row prefers it over an ugly raw ID.
Providers do not all honour that. Aggregators commonly return a prose blurb
instead ("Fast DeepSeek model for efficient chat, coding help, and agent
loops"), which fails as a label twice: it overflows the row, and because such
blurbs are written per model FAMILY rather than per model, several DIFFERENT
models collapse to byte-identical rows. Observed in a live picker with two
identical "Open-weight GPT model for self-hosted reasoning..." rows and two
identical "Kimi multimodal agent model..." rows -- the distinguishing ID was
visible only in the detail line of whichever row happened to be highlighted, so
the list could not be used to pick between them.
providerWizardGenericModelDescription cannot catch these: it rejects vague
descriptions ("live model", "catalog default"), whereas these are specific, just
shared and sentence-shaped. So gate on shape instead -- a display name is short
and few-worded; anything longer is prose and the ID (unique by construction)
makes the better label. Friendly names are still preferred where providers
supply them, so the existing behaviour is unchanged for well-behaved catalogs.
* fix(tui): keep the sidebar open under the / command palette
sidebarAvailable grouped suggestionsActive() with the full-screen overlays
(setup, wizards, pickers), whose stated rationale is that they "take over the
chat column and render at full width". That is not true of the `/` palette:
suggestionOverlay draws it through centerRenderedBlock at
minInt(width, suggestionPaletteMaxWidth), a centred box capped at 76 cells
floating over the chat column.
Treating it as full-screen collapsed the whole layout on every `/`: the sidebar
disappeared, the plan panel dropped out of it and re-rendered inline above the
composer, and the transcript re-wrapped to full width -- a jarring reflow for a
popup, and worst mid-run with a live plan on screen.
It cannot overlap the sidebar either: twoColumnTranscriptView renders the
overlay with width = chatColumnWidth, so the palette is capped at
min(chatColumn, 76) and centred inside the chat column. Mouse hit-testing is
unaffected because sidebarLineAtMouse carries its own suggestionsActive() guard,
so clicks still reach the palette rather than the sidebar rows beneath it.
The genuinely full-width overlays keep suppressing the sidebar, pinned by the
new test alongside the palette case.
---------
Co-authored-by: KRATOS <[email protected]>
* fix(tools): give write_stdin's invalid-session errors the same recovery guidance
Follow-up to #749 (write_stdin session-id probing) / #702.
write_stdin had three "no valid live session" error paths with three different
messages and signatures: a missing session_id returned "session_id is required",
a zero/negative/non-integer one returned "session_id must be at least 1", and
only a valid-but-unknown id got the rich UnknownExecSessionError recovery guidance
("do not guess or probe; start a session with exec_command, or use edit_file/
write_file"). So a model that called write_stdin with session_id 0 (the common
"I have no id" placeholder) got a terse error with no way forward, and naming the
minimum nudged it toward trying 1, 2, 3... the exact id-probing #749 suppresses.
The three signatures also meant a model moving 0 to 1 to 2 reset the
repeated-failure streak on each class of mistake.
Route the missing / non-integer / <1 cases through the same UnknownExecSessionError
message. Now every "no live session" mistake gives the same recovery guidance and,
because that message is id-invariant, shares one repeated-failure signature, so any
mix of missing/zero/probing accumulates toward the halt.
Updates TestWriteStdinRequiresPositiveSessionID to cover missing/zero/negative/
non-integer and assert the recovery message. Guardrail signature/halt tests
unchanged.
* test(tools): cover the explicit session_id: nil case for write_stdin
The ambient ZERO_SANDBOXED=1 + ZERO_SANDBOX_BACKEND markers are user-controlled
at an unsandboxed process boundary. Policy could auto-allow an ordinary shell
command (backend reports a native wrapping sandbox) while the runner, seeing the
same markers, returned an unwrapped pass-through plan — the command then ran
directly on the host with no isolation and no prompt.
shellSandboxActive now mirrors the runner: when IsAlreadySandboxed() (the markers
are present, so wrapping is skipped) the sandbox is not the boundary for this
command, so it reports inactive and the shell command takes the normal approval
path instead of auto-allowing. Immediate mitigation per the issue; authenticated
launch provenance is the longer-term fix.
Co-authored-by: KRATOS <[email protected]>
* fix(perfbench): grant write tools so mutating tasks measure real edits
The turn benchmark invoked `zero exec` in its default read-only posture,
which exposes no write or shell tools (no edit_file/apply_patch/
write_file/exec_command/bash). So the mutating classes (edit/fix/
refactor) could never apply a change: a run either ground to the turn
ceiling hunting for an edit tool or reported a no-tool blocker, and the
only tasks that 'passed' were ones whose oracle grep matched the stamped
.zero-answer.txt narration rather than a real edit.
This invalidated every mutating-class number in both baselines. A live
trace of fix-07 (a one-line admin->user prefix change) showed the model
calling only read_file/grep/lsp_navigate/update_plan and then stating it
had no file-writing tool. Adding --skip-permissions-unsafe exposes the
full tool set; each task already runs in an isolated throwaway fixture
copy, so there is nothing to protect. With the flag, edit-01/fix-01/
fix-07/refactor-01 go from failing (or false-passing) to 4/4 real
passes, and tool_execution rises from ~0.4% to ~29% of wall as the write
tools are actually exercised.
Adds TestBuildTurnExecArgsGrantsWriteTools pinning the flag as a
correctness contract.
* fix(perfbench): use --auto member and let the oracle judge incomplete exits
Reviewer feedback on the write-tools grant: --skip-permissions-unsafe is
broader than the benchmark needs. It also drops the workspace, network,
and destructive-command guards and auto-retries sandbox-blocked commands
unsandboxed. Switch to --auto member, which grants exactly the write +
sandboxed-shell tools the mutating classes need while keeping those
safeguards.
member-auto's shell is sandboxed, though, so on a host without sandbox
setup the agent's own self-verification (go test/build) can't run and the
turn exits INCOMPLETE even after a correct edit. The runner used to treat
any nonzero exit as failure before consulting the oracle, which would
false-fail those correct edits. Make the oracle authoritative for
oracle-bearing tasks: the stamped test/grep against the actual fixture
files is ground truth, so a correct edit passes regardless of the exit
code. Latency-only tasks have no oracle, so a nonzero exit still fails
them.
Verified with a 4-task glm-5.2 smoke (edit-01/fix-01/fix-07/refactor-01):
4/4 real passes under --auto member. Updates the exec-args test to assert
--auto member is present and --skip-permissions-unsafe is absent, and adds
TestOracleAuthoritativeOnIncompleteExit and
TestNonzeroExitStillFailsLatencyOnly.
* fix(perfbench): reject fixtureless tasks so the write-tools grant can't escape isolation
CodeRabbit and gnanam both flagged the same structural gap: buildTurnExecArgs
grants the write + sandboxed-shell tools to every invocation, but the fixture
isolation was conditional (a task with no workspaceFixture ran in the caller's
cwd). So the grant and the guard could drift apart, and a fixtureless task would
run an agent with write/shell tools in the caller's real repo dir.
Make the isolation a checked precondition: NewTurnExecRunner now rejects a task
with no workspaceFixture before launching zero exec, failing loudly rather than
silently running in cwd. Every shipped task already declares a fixture, so this
only fires on a malformed or newly added one.
Adds TestTurnRunnerRejectsFixturelessTask (rejection is pre-launch: it returns
the fixture error even with a nonexistent binary).
* fix(perfbench): defer to the oracle only for INCOMPLETE (exit 4), not every nonzero exit
anand's follow-up: the previous commit cleared VerifyErr for any nonzero
run_end whenever a VerificationCommand was present, which would also convert
a crash (1), usage error (2), provider failure (3), or interruption (130)
into a passing result whenever a partial edit happened to satisfy the oracle.
Gate the oracle override on exitCode == exitIncomplete (4): the completion
gate's "work maybe done but not signaled" case, the only one where a correct
edit can legitimately exit nonzero (its sandboxed self-verify couldn't run
under --auto member). Every other nonzero exit stays authoritative, so a
partial edit can't launder a crashed or interrupted run into a pass.
The 4-task glm-5.2 smoke stays 4/4 (those tasks exit INCOMPLETE, not some
other code). Adds TestNonIncompleteExitStaysAuthoritative (a correct edit that
reports exit 1 must still fail) and mirrors internal/cli.exitIncomplete as a
local execExitIncomplete constant.
* test(perfbench): pin the exit-4 oracle deferral from both sides; drop dead fixture branch
Follow-ups from a self-review of the exit-4 gating:
- Add TestIncompleteExitStillFailsWhenOracleFails: an INCOMPLETE (exit 4) run
that did NO work must still FAIL, because deferring to the oracle still means
the oracle is consulted. The sibling TestOracleAuthoritativeOnIncompleteExit
applies a correct edit and would pass either way, so without this a regression
that turned exit 4 into a blanket pass would go unnoticed.
- Broaden TestNonIncompleteExitStaysAuthoritative to a table over exit 1/3/130
(crash/provider/interrupt), not just 1, so every named launder-risk code is
covered.
- Tighten the NewTurnExecRunner doc: the verdict gate is the VerificationCommand
(which runs the stamped OracleTest via go test), not OracleTest on its own.
- Drop the now-dead "if WorkspaceFixture != empty" branch: the fixtureless guard
added earlier already guarantees it is set.
No behavior change; the 4-task glm-5.2 smoke stays 4/4.
* feat(tui): add /undo as an alias for /rewind (#698)
/undo was unregistered and fell through to commandUnknown. Add it to the
/rewind command's aliases (the same mechanism /quit, /find, /mcp-status use), so
it dispatches to the existing rewind handler with args intact.
* test(tui): cover the /undo numeric-sequence form (#698 review)
Add a parseCommand("/undo 123") assertion so both the latest and numeric
<sequence> forms of the /rewind contract are exercised through the alias.
---------
Co-authored-by: KRATOS <[email protected]>
Token exchange/refresh and the device authorization/poll POSTs validated only
the initial endpoint, then let the http.Client follow a 307/308 that replays the
form body (code, PKCE verifier, refresh_token, client_secret) to an unvalidated
origin.
Add withoutRedirects(): a shallow client copy whose CheckRedirect refuses every
redirect (ErrUnsafeRedirect). Applied at PostToken (covers ExchangeCode, Refresh,
and MCP which delegate to it), RequestDeviceCode, and pollDeviceOnce. The caller's
client is never mutated; legitimate token endpoints that return 200 are unaffected.
Co-authored-by: KRATOS <[email protected]>
* docs(readme): note govulncheck/golangci-lint install to GOPATH/bin
The installed binaries land in $GOPATH/bin (default ~/go/bin), which must
be on PATH to run govulncheck directly. Document the export snippet so the
lint/security tooling from the contributor setup actually resolves.
* docs(readme): say "them" instead of singling out govulncheck
golangci-lint installs to the same $GOPATH/bin as govulncheck, so the
PATH note applies to both, not just the one named.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* docs(readme): honor GOBIN and make the PATH snippet idempotent
go install writes to GOBIN when set, with GOPATH/bin as the fallback, and
rerunning the old snippet appended the same directory repeatedly.
Co-Authored-By: Claude Fable 5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
* fix(tui): cache settled alt-screen transcript
* fix(tui): invalidate settled alt-screen cache on in-place status row updates
setDoctorStatusRow, setSandboxSetupStatusRow, and setCompactStatusRow all
mutate an already-flushed transcript row in place (m.transcript[i] = row)
without invalidating the alt-screen settled cache. Since none of frontier,
width, or row count change on such an update, settleTranscript's rebuild
guard never fires and the View fast path serves the stale cached snapshot -
e.g. the doctor connectivity spinner freezes on its first frame.
Zero altScreenSettledWidth on the in-place path, mirroring the existing
pattern in toggleTranscriptRow, so the next settle rebuilds the cache.
Addresses PR #647 review feedback from Vasanthdev2004.
* fix(tui): invalidate settled transcript cache
* fix(tui): invalidate settled file selection cards
A model that calls write_stdin with no live session probed sequential
session_ids (1, 2, 3, …), each failing, and the run ground on for a long
time before halting. The repeated-failure guard keys on a normalized,
80-char-truncated signature of the tool error, and the old message
"Unknown exec session_id %d" put the varying id inside that prefix, so
every probe produced a fresh signature and the 6x-same-error halt never
fired.
- Rewrite the unknown-session error so stable recovery guidance leads and
the id trails past the signature window: probing now collapses to one
signature and trips the halt, and the model is told how to recover
(start an exec_command, or use the file-edit tools).
- Pin session_id's schema Minimum to 1 so the advertised schema matches
the runtime floor (intArg min 1).
- system_prompt: state that session_id is only ever an id returned by a
still-running exec_command and must never be guessed or probed.
Tests pin the id-invariance of the signature and that distinct-id probing
now halts at the guard's stop threshold, plus the schema floor and the
recovery text. The TUI "Sent input" label on a failed write_stdin
(issue criterion 4) is a separate cosmetic concern in a shared hot path
and is left as a follow-up.
* Add transcript-grounded structured task state
Project existing plan, tool-result, changed-file, verification, and completion events into a deterministic per-run snapshot.
Emit content-free aggregate snapshots to traces. Carry bounded objective context through compaction and ground completion checks only when the projection matches the transcript; mismatches retain transcript-derived behavior and drop stale carried state.
Tested: make fmt-check
Tested: go vet ./...
Tested: go test ./...
Tested: go test -race ./internal/agent ./internal/trace
Tested: go run ./cmd/zero-release build
Tested: go run ./cmd/zero-release smoke
Tested: govulncheck ./... (no vulnerabilities found)
Advisory: pinned golangci-lint reports only unrelated pre-existing findings
Tested: git diff HEAD --check
* Preserve task objective across repeated compaction
Keep the immutable run objective when plan calls have been elided, while admitting mutable task fields only when plan parity still matches the transcript.
Make plan parsing match update_plan rejection semantics, coalesce and cap task-state trace events, rename parity to its plan-only scope, use explicit nilable dependencies, and remove confirmable objective fingerprints from traces.
Tested: make fmt-check
Tested: go vet ./...
Tested: go test ./...
Tested: go test -race ./internal/agent ./internal/trace
Tested: go run ./cmd/zero-release build
Tested: go run ./cmd/zero-release smoke
Tested: govulncheck ./... (no vulnerabilities found)
Advisory: pinned golangci-lint reports only unrelated pre-existing findings
Tested: git diff HEAD --check
* feat(tui): add isolated btw conversations
Add /btw with inline-question support, isolated non-resumable session forks, background main-run routing, and safe return behavior.
Refs #637
* test(tui): cover btw return controls
Preserve drafts when Ctrl+C is pressed during an active BTW run and cover returning to the parent through the documented /btw toggle.
* Address BTW isolation review feedback
* Reject explicit resumes of side sessions
* Harden BTW isolation lifecycle
* perf(agent): preserve prompt cache prefixes
Build the system prompt once per run, fingerprint the exact emitted prompt and ordered tool definitions, and expose the full system-prompt hash in traces.
Add normalized and serialized two-turn regressions covering append-only messages, stable tools, and a stable session cache key.
* fix(tools): stabilize registry iteration order
Return registered tools in name order so provider-visible tool lists and prompt-prefix fingerprints cannot drift with Go map iteration. Add a regression covering the registry ordering contract.
Discovery metadata was merged without the https/loopback endpoint rule that
configured endpoints already pass, letting a malicious issuer downgrade the
authorization/token/device/registration endpoint after config validation.
- Add exported ValidateEndpointURL as the single endpoint-safety rule;
validateTokenEndpoint now delegates to it.
- Backstop in BuildAuthorizationURL (the choke point both the provider and MCP
flows build their browser URL through).
- Validate each discovered endpoint before merge in the provider resolveEndpoints
and validate resolved MCP metadata in both branches; fail closed on insecure.
Co-authored-by: KRATOS <[email protected]>
* perf(agent): execution profiles, --exec-profile, bench passthrough, TUI /profile (PR10b+10c)
* fix(execprofile): harden profiles against review findings
- fast escalates on critical-risk mutations, not high: the sandbox marks
every shell command high before command analysis, so a high trigger
spent the one-shot on the first go test of any task
- escalation can now restore the provider-default effort a profile
displaced (PostureEscalation.RestoreDefaultEffort; a plain empty
target means leave untouched)
- TUI /turns while a profile is active pins the budget: disarms the
escalation turn target (mirroring exec's explicit --max-turns rule)
and profile reverts use touched bits instead of value equality, so
explicit choices survive even when they coincide with profile values
- spec-draft runs get the same escalation policy as the main run
instead of the displaced budget with no safety net
- bench validates and canonicalizes --exec-profile before spawning:
an unknown name previously produced an exit-0 report full of
millisecond usage-error walls
- turn summary prints exec-profile alongside mode; zero exec rejects
an inline-empty --exec-profile=; balanced trace label documented and
pinned as deliberate attribution
* fix(execprofile): explicit effort choices disarm the escalation effort restore
An explicit effort set AFTER profile selection could be cleared by a
mid-run escalation (the effort analog of the /turns pin, introduced by
RestoreDefaultEffort): TUI /effort and Ctrl+T now disarm the restore on
a policy clone, and the spec-draft path only arms it when no explicit
--spec-reasoning-effort governs the draft.
* fix(execprofile): address review findings on the profile surfaces
- --use-spec projects away a profile's self-correct knob instead of
silently arming an option the draft runner ignores (the explicit
--self-correct --use-spec combination is already a parse-time error)
- RunTurnBench canonicalizes and validates ExecProfile at the library
boundary, so a direct caller's casing/whitespace cannot fork report
labels and an unknown name fails before anything runs
- reverting a profile whose displaced budget was zero clears
ZERO_MAX_TURNS (SetMaxTurnsEnv ignores zero, so sub-agents would have
kept the removed profile's budget)
- the TUI effort-disarm test fails instead of skipping when the catalog
stops filling low effort
* fix(tui): reconcile an active profile's effort fill on model switch
The fill is per-model, not a session preference: fast selected on a
model without low fills nothing, and switching to a model that supports
it should behave like selecting the profile there; the reverse switch
must not keep sending a level the destination does not support. Both
switch paths (the /model command and the cross-provider picker) now
re-derive the fill, leaving explicitly touched efforts alone and
keeping the escalation's effort restore in step. Also: the revert-env
test asserts key removal via LookupEnv, and applyProfileTurnBudget's
pinned-budget parameter is named and documented as covering mode
presets, not just the flag.
* fix(tui): void profile effort bookkeeping when the model-switch drop erases it
The /model path's pre-existing unsupported-effort drop ran before the
profile reconciliation and left contradictory state behind: a dropped
touched override kept blocking the profile from governing, and a
dropped profile fill left a stale applied value with the effort restore
still armed. The drop itself is load-bearing (the TUI run path forwards
the effort to the provider unfiltered), so instead of preserving a
known-unsupported level, the voided choice now resets the profile's
effort bookkeeping and the reconcile re-derives from scratch. The whole
sequence lives in one ring-parameterized helper driven by the switch
target's authoritative ring, unit-tested against synthetic rings for
both the void-then-refill arc and the supported-override survival.
* fix(tui): only drop an explicit effort when the target ring is authoritative
A nil ring meant both a catalog model with no effort controls and a
live-discovered custom model the catalog cannot vouch for. The drop now
requires an authoritative ring (a resolved catalog entry, whose ring may
legitimately be empty); an unknown ring preserves an explicit preference,
matching the cross-provider picker's behavior, while the profile's own
fill still applies only where support is known.
* fix(perfbench): absolutize the bench binary and make errored tasks first-class
* fix(perfbench): state that errored tasks count as pass-rate failures
* fix(perfbench): align errored-task wording with the actual tier accounting
* chore(perfbench): never commit generated baseline reports
* fix(doctor): report missing npm native binary in wrapper
Co-authored-by: Cursor <[email protected]>
* fix(doctor): preserve JSON output for missing native binary
* fix(doctor): preserve doctor CLI behavior in wrapper fallback
Co-authored-by: Cursor <[email protected]>
* style: gofmt npmwrapper doctor fallback tests
Co-authored-by: Cursor <[email protected]>
* fix(doctor): reuse shared Bun recovery helpers in wrapper fallback
Extract bunRecoveryParagraph and related helpers so the doctor missing-binary text path and the generic wrapper bail share the same copy. Add regression tests with ZERO_WRAPPER_SIMULATE_BUN to guard against future drift.
Co-authored-by: Cursor <[email protected]>
---------
Co-authored-by: Cursor <[email protected]>
Extract completion decisions from the agent loop into a feature-gated typed policy with complete, incomplete, and uncertain outcomes. Preserve bounded plan-stall nudges and allow at most one semantic acceptance check for self-correcting runs.
Tested: make build
Tested: make test
Tested: go fmt ./...
Tested: go vet ./...
Tested: make lint
Tested: govulncheck ./...
Note: repository-wide pinned golangci-lint reports 36 pre-existing unrelated findings; internal/agent/... reports 0 issues.
Upgrade the parallel tool planner from SideEffectRead probes to the PR5
CapabilitiesOf contract: EffectReadOnly + ThreadSafe + auto-allowed, with
resource-key conflict boundaries so same-path reads stay sequential.
Mark audited pure reads ThreadSafe (read_file, read_minified_file,
list_directory, glob, grep, skill, web_fetch). Glob/grep use scopedScan
directory keys (nil for workspace-wide "." so scans do not false-conflict).
Tests cover the capability gate, key conflicts, extendParallelRun windows,
and catalog ThreadSafe audit for concurrent-safe reads.
Co-authored-by: KRATOS <[email protected]>
* perf(turn-bench): Phase 0 — strengthen oracles so pass rate can't be misread as correctness
The baseline manifest's pass/fail contract had three holes that let a weak
or no-op agent read as a pass:
- edit grep oracles were substring checks: a reworded line (e.g.
fmt.Println("debug: starting") -> fmt.Println("starting up")) passed
`! grep 'debug: starting'`.
- refactor lived in the build tier with a non-positive `go build ./...`,
so a no-op refactor passed.
- the 24 read-only tasks (nav/longproc/longctx/parallel) had no oracle;
a zero-exit only proved the turn ran.
This makes the tiers honest:
- edit/refactor now carry a stamped oracle_test.go compiled by
`go test ./...` — the Go compiler is the structural verifier, so a
no-op refactor, a missing field, or a reworded-but-not-removed line
fails to compile/run. The test is stamped into the fixture copy AFTER
the agent run, so it can't interfere with the agent's own build or be
pre-seen.
- nav gains an answer-oracle: the harness captures the agent's final
answer (.zero-answer.txt) and greps it for determinable facts. Count
tasks (nav-04/05/08) use a structured `count: N` token so the oracle is
tight rather than a loose prose-contains on "0".
- refactor graduates from build to correctness (its oracle is now
positive); nav graduates from latency-only to correctness. The build
tier is empty (buildOnlyClasses: []).
- longproc/longctx/parallel stay permanently latency-only — there is no
deterministic oracle for "report whether the build succeeds" or
"summarize a large file"; documented in MANIFEST.md.
Tier counts: correctness 34 (edit 10 + fix 8 + nav 10 + refactor 6),
build 0, latency 14. Total 48 unchanged.
TurnSchemaVersion 2 -> 3: the result shape is unchanged (only class-list
membership shifts) but correctnessPassRate now means something strictly
stronger, so the bump prevents a v2->v2 cross-version comparison from
misreading the jump as a model improvement.
Prerequisite fix: the mutating fixtures had no go.mod, so `go test ./...`
in the temp copy failed with "cannot find main module". Added go.mod per
fixture (edit/fix/refactor/nav) and moved copyFixture's temp dir one level
below the system temp root — Go ignores go.mod in direct children of the
temp dir (a hijack guard), which would have broken every compiler-backed
oracle. This also fixes the pre-existing fix/refactor oracles, which were
silently broken because the test suite used fake runners that never ran
go test.
Tests: stub-binary gating tests prove each oracle fails the wrong thing
(no-op refactor, missing field, wrong nav answer, reworded debug print) and
passes the right thing (real refactor, added field, correct answer); an
edit-01 test proves the scoped negative grep doesn't false-fail a correct
rename that leaves the doc comment. Aggregation, schema, and unit tests
cover the v3 tier model and the answer-capture helper.
* Address CodeRabbit review on PR #712: tighten oracles + isolation
- nav count oracles (nav-01/04/05/08): anchored line-exact
`^count: N$` with the fixture's exact expected count, so a substring
like "the count: 0" or a wrong count like "count: 3" fails instead
of rubber-stamping. nav-01 added to the structured-count contract.
- stampOracleAndAnswer now errors when a task has an oracle or
verification but no workspace fixture, so verification can't run in
the caller's cwd with the oracle never compiled (false-pass closed).
- copyFixture uses a unique 0700 os.MkdirTemp parent under the temp
root and nests the copy beneath it (grandchild of temp root), so the
Go go.mod hijack guard is satisfied and cleanup removes the whole
parent. Avoids a predictable shared world-readable dir.
- Rejection tests require a non-empty VerifyErr via a shared
assertVerifyFailed helper, proving the failure came from
verification rather than a harness error or a silent non-pass.
- Unify streamJSONExitCode + streamJSONFinalText behind one
parseStreamJSON parser (behavior-preserving; scanner limits and
malformed-event handling now live in one place).
* Address gnanam1990 review on PR #712: close count=0 gameability + stronger oracles
- nav count tasks (nav-04/05/08) had a count=0 ground truth, so an agent
that never opened the workspace and always emitted "count: 0" passed
three correctness tasks -- the exact pass-rate-misread-as-correctness
failure this PR closes. nav-04 now has a real TestGreet (count 1) and
nav-05 a real TODO (count 1); nav-01's file count moves to 5. nav-08
stays at 0 (a real third-party import would need a network fetch and
break the offline suite) but its oracle now requires the answer to name
both stdlib imports (fmt from main.go, testing from main_test.go), so a
blind count:0 or a main.go-only read fails. nav-08's prompt now asks the
agent to enumerate and classify every import, so naming the stdlib
imports is part of a correct answer, not a false-fail.
- refactor-05: stamp a behavioral oracle (TestGreetWrapped) so deleting
both Wrapper and greetWrapped, or stubbing the caller to return "",
fails to compile/run. The negative grep alone passed that wrong edit.
- refactor-04: replace the brittle exact-text shell grep with a stamped
file-reading oracle using a spacing-tolerant regex, so a bare
map[string]int decl under any spacing/:= variant can't dodge it, and
the Stats type must be referenced in main.go.
- edit-05: also assert the "debug: starting" message text is absent, so
a respell onto fmt.Printf / backticks / log.Println / println that
still prints the message fails (the fmt.Println(" check missed those).
- v3 doc comments on ClassSummary / TurnBenchResult /
FormatTurnBenchSummary now describe the v3 tiers (correctness =
edit/fix/nav/refactor, build empty, latency = longproc/longctx/
parallel) instead of the stale v2 model.
- stampOracleAndAnswer failure now mutates the existing outcome instead
of returning a fresh one, so the already-parsed trace and trace issue
survive a stamp error (attribution is preserved, pass/fail unchanged).
- Schema comment provenance: "PR #701" -> neutral "Phase 0 oracle
hardening" (this PR is #712).
- New gating + satisfiable stub tests for refactor-04/05 and edit-05, and
count-oracle zero-guess / inspection-proof tests for nav-04/05/08.
* Fix macOS CI: copyFixture isolation test was slash-sensitive
TestCopyFixtureIsolatesSourceFromMutation compared filepath.Dir(parent)
against os.TempDir() verbatim. On macOS $TMPDIR ends in a trailing slash
("/var/folders/.../T/") while filepath.Dir strips it, so the equality
false-failed even though the parent is genuinely a direct child of the
temp root. Linux (/tmp, no slash) and Windows (no slash in this Go
build) matched by accident.
The production copyFixture nesting is correct on all platforms (the
grandchild copy sits one level below the temp root, satisfying Go's
go.mod hijack guard); only the assertion was slash-sensitive. Normalize
both sides with filepath.Clean.
* Close nav-04/05 blind-count-one gameability (anandh8x review)
nav-04 and nav-05 had a count-only oracle (anchored '^count:1$'). Once the
ground truth became 1, an agent that never inspects the fixture and always
emits 'count: 1' passed both — the blind-count-one surface the prior
non-zero-ground-truth fix opened. Pair the count with a workspace-derived
named fact that proves inspection, mirroring nav-08's fmt+testing:
- nav-04 now also requires 'TestGreet' (the one test function in
main_test.go) — a specific, non-generic name a blind agent can't produce
without reading main.go to learn a greet function exists. Fully closes
the blind-count-one surface.
- nav-05 now also requires 'main.go' (the file holding the one TODO).
main.go is the conventional entrypoint and the most guessable filename, so
this reduces rather than fully closes the surface — a blind 'count: 1, in
main.go' can still pass. Accepted for Phase 0: the blind floor drops below
100% (a bare 'count: 1' fails), so a model still moves the pass rate by
inspecting. MANIFEST.md documents this residual honestly.
Two gating tests per task: RejectsBlindCountOne (bare 'count: 1' now fails)
and, for nav-05, RejectsSubstring (main.go present but unanchored count
still fails — parity with nav-04). Existing accept tests still pass (their
answers already name TestGreet / main.go).
Doc nits also fixed: MANIFEST.md #701 -> #712; refactor-05 removed from the
'no oracleTest' inventory (it now has TestGreetWrapped); the nav-01 named-
fact prose corrected to the three files the oracle actually anchors on;
test comment #701 -> #712.
* fix(sandbox): scrub dynamic credential env vars
* fix(sandbox): tolerate env assignments in configured sensitive keys
A config value mistakenly given as a full assignment (e.g.
"COMPANY_LLM_SECRET=...") would never match the real env key during
scrubbing, silently re-exposing the credential to sandboxed commands.
normalizeSensitiveEnvKeys now keeps only the name part before '=' and
re-trims it, per PR review.
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(sandbox): scrub credentials on direct/degraded command plans
directCommandPlan (used when the native sandbox backend is unavailable,
disabled, or not required, including the EnforcementDegraded fallback)
left Env nil whenever spec.Env was nil, so exec.Cmd inherited the full
caller environment unscrubbed. Configured apiKeyEnv credentials and
dynamically named ZERO_OAUTH_<NAME>_CLIENT_SECRET variables leaked
through that path even though the wrapped sandbox plans already
scrubbed them.
Route direct plans through scrubSensitiveEnv the same way wrapped
plans do, snapshotting os.Environ() when spec.Env is nil so scrubbing
still applies. Adds a regression test covering the degraded-fallback
path with both a configured and a dynamically named secret.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
---------
Co-authored-by: Claude Fable 5 <[email protected]>
A user-level MCP server disable is now sticky. The project config
(a cloned repo's ./.zero/config.json) cannot re-enable a server the
user disabled, and cannot disable a server the user explicitly enabled.
The previous merge just assigned base.Disabled = next.Disabled, so a repo
that set disabled:true could silently defeat a user's explicit mcp enable
<server>. The guard is now symmetric via a mergeMCPServer canReenable
flag: once a higher-trust scope has explicitly set the disabled flag, a
lower-trust layer may not override that decision in either direction. Only
the CLI override scope (canReenable=true) may lift a sticky user decision.
The prior disabledSet-before-check ordering bug is also fixed: the
higher-trust scope's prior disabledSet/Disabled is captured before folding
in next's flag, so a project layer can still disable a default-enabled
server (e.g. firecrawl) rather than being silently ignored.
Ports the fix onto main's refactored MCP merge (internal/config/mcp_merge.go
and mergeProjectMCPConfig), which splits project-scope merging from the
general mergeMCPConfig path.
Fixes#512
* fix(hooks): run sessionEnd hooks after Esc/Ctrl+C interrupts
On interrupt, Run returns with ctx already canceled. The deferred
dispatchSessionEnd call passed that same ctx into Hooks.Dispatch, whose
context.WithTimeout derives an already-canceled child context, so the
hook process never actually launches (recorded as timed-out/error in
the audit log). Since most sessions end via interrupt, sessionEnd
hooks were effectively unreliable.
Detach the sessionEnd dispatch from the run context's cancellation
with context.WithoutCancel so the dispatcher's own timeout still
applies without being short-circuited by the run's cancellation.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* test(agent): fall back to GOROOT for hook regression
* test(agent): justify GOROOT fallback
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
* feat(aimlapi): AI/ML API guided onboarding (top-up + key issuance)
Add the AI/ML API provider integration to the zero CLI: a guided TUI
onboarding sub-flow that takes an existing key or an email top-up and
writes the issued key into the provider profile, attributed to the
Gitlawb rebate partner.
- internal/aimlapi: OpenAI-compatible client, partner-checkout top-up,
key validation, streaming, and endpoint config (Paths A/B/C).
- providercatalog / providermodelcatalog: register the aimlapi provider
with default headers and models.
- tui: aimlapi onboarding screen wired into the provider wizard and
onboarding flow.
Default endpoints point at production (auth/app/api/pay/aimlapi.com);
each is overridable via AIMLAPI_*_URL env vars.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
* fix(aimlapi): address review findings in onboarding flow
- topup: use errors.As for the 5xx retry check so a wrapped APIError
still retries instead of aborting a paid checkout.
- onboarding: a Path-A top-up on an email with no account now lands on a
single coherent "key saved, balance not topped up" screen instead of a
green "ready" plus a red error.
- onboarding: an empty amount field is rejected instead of silently
falling through to the $25 default.
- collapse the two identical top-up prompt constants into MsgTopUpPrompt
and drop the dead amountPrompt() branch.
- reuse stdlib maps.Clone instead of a third bespoke header-copy helper.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
* fix(aimlapi): retry transient poll errors and sharpen amount validation
* fix(aimlapi): retry transient poll errors and surface real amount errors
* docs(aimlapi): document exported client API; drop out-of-scope gitignore entry
Addresses the two CodeRabbit PR checks on #655:
- Add doc comments to the exported aimlapi client API (Client, APIError,
the session/checkout/onboarding types and their methods) and
ParseAmountUSD, to satisfy the docstring-coverage check.
- Remove the unrelated /zero.exe~ .gitignore entry that an earlier
review-fix commit added; it is out of scope for the provider work, so
the PR no longer touches .gitignore.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
* fix(aimlapi): render aimlapi row like other recommended providers
* fix(aimlapi): resolve onboarding review findings (Path A funding, base URL, request cancellation)
* fix(aimlapi): validate pasted API keys
* test(aimlapi): clarify pasted key validation
* test(aimlapi): cover key-balance low-balance transition
* fix(aimlapi): reject non-finite top-up amounts
* fix(cli): scope and canonicalize provider headers
* fix(tui): distinguish invalid verification codes
* feat(aimlapi): resume account-bound top-ups safely
* feat(tui): offer top-up for existing AIMLAPI keys
* feat(tui): reuse AIMLAPI env key on first run
* feat(tui): reuse configured AIMLAPI profiles
* test(aimlapi): trim redundant flow coverage
* fix(tui): preserve existing AIMLAPI profile metadata
* fix(tui): clone AIMLAPI headers in env fallback
* fix(aimlapi): address remaining review findings
* fix(aimlapi): harden onboarding lifecycle
* fix(aimlapi): preserve validated checkout context
* fix(aimlapi): harden checkout retry state
* fix(tui): clarify AIMLAPI configured choices
* fix(aimlapi): make checkout retries idempotent
* fix(aimlapi): validate checkout responses
* fix(providers): reconcile aimlapi catalog after rebase
---------
Co-authored-by: Lookoff123 <[email protected]>
Co-authored-by: Claude Opus 4.8 <[email protected]>
* perf(tools): add explicit tool effect metadata
Introduce fail-closed EffectClass and ToolCapabilities on every built-in
tool so a later concurrent read-only batch PR can decide safety from
explicit metadata rather than tool names. Plugin and MCP tools stay
EffectUnknown. No concurrent execution is enabled.
* fix(tools): address review feedback on effect metadata
Harden capability normalization and resource keys before PR6 consumes them:
- Force ThreadSafe=false for every non-ReadOnly effect at read time
- Reject duplicate builtin names in ValidateBuiltinCatalog
- Coerce numeric session ids and accept "session" for process keys
- Strip path/query before userinfo in endpoint host parsing
- Wire apply_patch keys from unified-diff paths + cwd
- Reclassify bash as WorkspaceWrite (one-shot shell mutator)
- Expand regression tests for keys, normalization, and gates
* fix(tools): keep multiFileResourceKeys used by apply_patch keys
Satisfies unused lint after switching apply_patch to applyPatchResourceKeys.
* fix(tools): resolve CodeRabbit residual capability/key issues
- Join apply_patch diff paths under cwd for conflict keys
- Validate constructor-declared capabilities before normalization
- Unify session/process ID key extraction helper
---------
Co-authored-by: KRATOS <[email protected]>
Compute a seven-field SHA-256 fingerprint of the cacheable prompt
prefix (base instructions, confirmation policy, project context, skills,
tools, tool schemas, complete) and emit one prefix_hash event per turn
through the trace recorder. The complete hash is the SHA-256 of the
canonical join of the other six, so any sub-component drift is
observable both individually and in aggregate.
The decomposition exists so a downstream observer can detect which
sub-component of the prefix broke cache stability across turns: a
stable complete_prefix hash means the cacheable prefix is byte-
identical, and the sub-hash that changed names the culprit.
No behavior change for untraced runs. For OpenAI, the existing
prompt_cache_key (session ID) is unchanged; the fingerprint is purely
additive observability. The Anthropic cache_control breakpoint work
already in main is not touched.
Co-authored-by: anandh8x <[email protected]>
* feat(tui): Ctrl+X leader chords and emacs menu navigation
Add Ctrl+X leader shortcuts for common slash commands (with Ctrl+X ?
chord map), and Ctrl+P/N previous/next selection in modals and pickers.
* fix(tui): drop Ctrl+X e /edit leader chord
/edit replaces the composer and would discard an in-progress draft; leave
it unbound so leader shortcuts stay draft-preserving.
* fix(tui): consume idle Ctrl+N as a no-op
Reserve Ctrl+N for emacs menu navigation so it never falls through to
remapped global bindings when no selection surface is open.
* docs: drop manual CHANGELOG entries for TUI shortcuts
* fix(tui): stop the composer cursor blinking while typing or unfocused
The composer's cursor blinked on a fixed timer unconditionally, including
mid-keystroke, which made typing feel janky since the cursor's job is to mark
the current position. Gate the existing blink tick on two states instead:
force solid while a keystroke landed within the last 500ms (reusing the
existing lastCharTime tracker), and hide it entirely while the terminal
window is unfocused (new terminalFocused field, driven by tea.FocusMsg/
BlurMsg). Idle and focused keeps the prior blink behavior unchanged.
Also decouples view.ReportFocus from the notifier (it was previously gated on
m.notifier != nil, which is effectively always true in production but left
cursor-focus behavior fragile if that ever changes) so focus reporting is
requested unconditionally.
* fix(tui): apply caret visibility synchronously and in the argument-hint line
- A keypress, focus, or blur now updates composerCursorVisible in its own
message handler instead of waiting for the next 530ms composerBlinkMsg
tick, which could render a typed character caret-less, leave a visible
caret in an unfocused terminal, or keep it hidden after a refocus.
- commandArgumentHintComposerLine takes the caret visibility state instead
of painting its cursor cell unconditionally, so the required-argument
hint path follows the same focus and blink contract as the main
composer renderer.
- New tests assert the state immediately after each message, with no blink
tick in between, and cover the argument-hint render in both states.
* fix(tui): apply the caret state on composer paste
A paste is the same immediate-input transition as a keypress: routePaste now
refreshes lastCharTime and sets the caret visible for both the bracketed
tea.PasteMsg and right-click clipboardReadMsg paths, so a paste right after
the blink phase hid the caret renders solid immediately instead of waiting
for a tick that would toggle off a stale idle state.
* draft(tui): add theme interface and Claude/Codex presets proposal
Introduces the Theme interface alongside the initial specifications and styling models for the Claude (card-based, warm) and Codex (high-density, split-screen cyberpunk) layout presets. Detailed design plans are documented in docs/THEMES.md.
* fix(tui): implement Claude/Codex themes on the existing palette system
theme.go had replaced the tuiTheme/buildTheme/palette architecture every
renderer depends on with a standalone Theme interface using the wrong
lipgloss import, breaking the build and orphaning the existing theme
registry, /theme command, and picker.
Revert theme.go to the working implementation and add claude and codex
as real palette entries in theme_palettes.go, following the file's own
extension pattern. Both pass the WCAG AA contrast and gray-ramp
invariants asserted across the whole registry, and are picked up
automatically by --theme, ZERO_THEME, /theme, and the picker.
Rewrite docs/THEMES.md to describe the actual palette-registry
architecture instead of the removed interface.
* fix(tui): rename Claude/Codex to neutral Dune/Neon, ensure WCAG AA contrast compliance, and add tests
* style(tui): gofmt theme_select_test.go (drop trailing whitespace)
The ubuntu smoke run fails on gofmt -l; this clears the only unformatted
file in the draft so CI goes green.
* test(tui): cover the CLI/env resolution path for the dune and neon presets
TestNewThemePresetsWired only checked lookupTheme and the IsDark
grouping. Add coverage for the actual --theme/ZERO_THEME precedence
path (resolveThemeMode) and confirm applyTheme swaps zeroTheme to each
preset's own palette rather than a built-in fallback.
* fix(tui): raise Dune/Neon palette contrast and fix theme docs
Darken dune's accent, blue, and red tokens so the selected-row caret,
local-model dot, and diff deletion text clear WCAG AA against selBg and
delBg, including after ANSI-256 downsampling. Also correct THEMES.md's
description of bare /theme (it opens a live-preview picker, not a
list), and add the dune/neon names to the ZERO_THEME/--theme tables in
README.md and README_ZH.md.
* fix(tui): keep Dune and Neon readable after ANSI-256 downsampling
- Dune's accent becomes #724028: still AA on selBg and panel in truecolor
(5.46:1 and 7.03:1), and its xterm-256 quantization (#444444) now clears
AA on quantized selBg at 6.47:1 where the previous #7c4712 quantized to
#875f00 at 3.81:1. Blue already survived quantization at 4.67:1.
- Neon's diff bands move to hexes that quantize to distinct green and red
xterm entries (addBg #083c10 -> #005f00, delBg #3c0810 -> #5f0000,
addBgWord #147828 -> #008700, delBgWord #74202e -> #870000) instead of
collapsing to the same grays, while keeping every truecolor invariant.
- New TestExtendedThemeANSI256Contrast quantizes the palette tokens the way
a 256-color terminal does and asserts the Dune selected-row pairs stay AA
and the Neon bands keep their green/red identity and mutual separation.
- docs/THEMES.md is now linked from the Documentation sections of both
READMEs, and the Unreleased changelog inventory says twelve themes and
names dune and neon.
* fix(tui): keep Neon diff content AA after quantization, fix error border
- faintest becomes #74c468: line numbers now quantize to #87d75f, which
clears AA on the xterm-green addBg (#005f00) where the old #58af69
quantized to 2.95:1, while staying dimmer than faint so the gray ramp
stays monotonic.
- addInk becomes #ecffdc, quantizing to #ffffd7 for 4.60:1 on the word
band's #008700 (was 4.29:1). Both rendered diff-content pairs are now
asserted in the ANSI-256 test instead of documented as omissions.
- cardErr becomes #9a4042: 3.01:1 against the panel (2.43:1 before) and
3.65:1 quantized, meeting the 3:1 non-text component threshold, with the
border surface asserted in both renderings.
- docs/THEMES.md no longer claims the extended invariants run against the
whole registry: it now says new palettes must be added to the
per-palette contrast tests or given equivalent coverage.
* feat(cli): show ZERO wordmark on --version
The TUI's empty-state ZERO ascii art gets exposed via a new tui.Wordmark
helper and printed above the version line for `zero -v`/`--version`.
Coloring only applies when stdout is a real TTY and NO_COLOR isn't set,
so redirected or piped output (scripts parsing the version) stays plain.
* fix(release): match --version output by suffix, not exact string
The release smoke check compared zero --version output to an exact
"zero <version>" string, which broke once --version started printing
the wordmark above the version line. Check for a "version: <version>"
suffix instead so the smoke check doesn't couple to the wordmark art.
* fix(cli,tui): keep --version machine-readable off-TTY, drop wordmark color
- When stdout is not a terminal, --version prints exactly "zero <version>"
again: pipes, redirects, command substitutions, and the release smoke
contract all parse that single record, so the banner is a TTY-only
affordance now.
- The TTY path keeps the banner but restores "zero <version>" as the
version record instead of "version: <version>".
- Wordmark renders uncolored: only newModel resolves --theme/ZERO_THEME,
so painting the global dark palette here was unreadable on light
terminals. The terminal's default foreground works on any background.
- smokeVersion goes back to requiring the exact "zero <version>" output
instead of the suffix match that papered over the banner.
* feat(providers): add AI/ML API preset
* fix(providers): relocate aimlapi preset and drop referral header
Addresses the two review asks on #402:
- Move the AI/ML API descriptor out of catalog slot #2 (it sat above the
first-party OpenAI/Anthropic/Google entries) down next to openrouter in
the aggregator cluster. Re-sync expectedCatalogIDs and the
TransportOpenAICompat order-list to match.
- Drop the always-on X-AIMLAPI-Partner-ID / Integration-Repo /
Integration-Version attribution headers. There's no partner arrangement
behind the preset, so a non-overridable referral tag on every user's
request isn't something to ship on a community preset. aimlapi now rides
through plain CopyHeaders like every other provider. Removes
HeadersForCatalog (it existed only for this special-case), reverts the
factory and discovery call sites to CopyHeaders, and drops the header
test. The factory/discovery tests now assert the endpoint, auth, and the
user's own custom headers survive while no attribution header is sent.
* fix(providers): address CodeRabbit review on #621
- Document AIMLAPIID for docstring coverage.
- Apply providerio.CopyHeaders for Anthropic and Google provider paths,
matching the OpenAI path introduced for aimlapi header isolation.
Co-authored-by: Cursor <[email protected]>
* fix(providers): gofmt factory.go to unblock CI smoke
Remove mixed tab/space indentation in the openai.New options block so
ubuntu-latest fmt-check passes.
---------
Co-authored-by: Dmitry Tumanov <[email protected]>
Co-authored-by: Vasanthdev2004 <[email protected]>
Co-authored-by: Cursor <[email protected]>
Co-authored-by: KRATOS <[email protected]>
* feat(skills): discover shared ~/.agents/skills with multi-root skill loading
Add ~/.agents/skills as a read-only global discovery root after the
primary
Zero skills dir and before plugin roots. Unify runtime and CLI discovery
on
one multi-root path (DiscoveryRoots / LoadFromRoots / GlobalRoots) and
always
register the multi-root skill tool so bare runs and plugin runs share
the
same load surface.
Install/remove/lock still target only the primary Zero skills directory.
Fixes#610
* docs(skills): note lock stays on the primary write root
Document that install/remove/lock target only the primary Zero skills
directory, matching multi-root discovery write-root isolation.
* fix(skills): bubble primary root load errors from LoadFromRoots
Return non-missing failures from the first non-empty skills root so a
broken primary dir is not reported as an empty skill list. Keep fail-open
behavior for optional roots (~/.agents/skills, plugins).
* fix(skills): treat non-directory skills root as error on Windows
Windows maps ENOTDIR to ErrNotExist, so ReadDir on a regular file looked
like a missing skills dir. Reclassify existing non-directories and assert
the portable load behavior in tests.
* Add per-turn tracing and a turn-benchmark harness (Phase 0 baseline)
Introduce an opt-in `internal/trace` package that attributes a run's wall
time to named spans — prompt build, provider connect/queue, generation,
tool queue/execution, permission wait, verification, compaction,
persistence — plus counters for model requests, tool calls, retries,
reconnects, compactions, completion nudges, acceptance checks, model
switches, and input/cached/output tokens. The recorder is nil-safe (a nil
*Recorder is a no-op), so every stamp site can call it unguarded; an
untraced run is byte-identical to today.
The recorder threads into agent.Run via a new `Options.Trace` field and a
single `trace.WithContext` assignment, so the shared providerio seam
(connect around client.Do, queue around OAuth resolve, first token at the
first non-keepalive SSE payload) reaches it through `trace.FromContext`
without any provider-interface change. All instrumentation is opt-in: when
`Options.Trace` is nil the hot path is untouched.
Headless `zero exec` gains `--trace <path>` (and `ZERO_TRACE=<path>`),
writing an agenteval-contract-compatible NDJSON trace (`-` for stderr).
The trace is pure observation; enabling it does not change behavior.
A new per-turn benchmark harness extends `internal/perfbench` (reusing the
existing TaskSet/NumericStats/subprocess runner shapes): `RunTurnBench`
aggregates per-span median/P95 across iterations, ranks the top three
controllable latency sources by share of attributed time, rolls up per
task class, and totals tokens/counts. A checked-in 42-task manifest across
seven classes (nav, edit, fix, refactor, longproc, longctx, parallel) and
local offline fixtures back it, and `make baseline` runs it against the
built `zero`, writing `internal/perfbench/reports/baseline.json`. The
report is machine-specific and regenerated, not hand-edited.
The manifest is JSON rather than YAML to avoid adding a dependency;
per-task verification targets the specific test (`go test -run <name>`)
so fix tasks are independent. Each task is a fresh `zero exec` process, so
iterations are cold-start samples; a warm in-process path is left for
follow-up.
Verified: `go build ./...`, `go vet ./...`, `gofmt -l` clean on touched
files; `go test -race` green for internal/trace, internal/agent,
internal/perfbench, and cmd/zero-perf-bench.
* test(trace): make TestAttributionRatio clock-independent
The test recorded two synthetic 10ms spans with no real delay and asserted
the attribution ratio stayed <= 1.0. On a precise clock (Linux/macOS CI) the
wall is microseconds while attributed is 20ms, so attributed/wall blows past
1.0 and the test failed — even though the ratio legitimately exceeds 1.0
when spans overlap (parallel tool execution). On Windows the coarse timer
masked it, so the failure only surfaced in CI.
Assert the contract instead: attributed is the deterministic sum of span
durations, and the ratio equals attributed/wall (0 when wall is zero). Add a
zero-wall case for the divide-by-zero guard.
* Address review feedback on the per-turn tracer + benchmark harness
Benchmark runner (internal/perfbench):
- A nonzero agent exit code no longer counts as Passed. The runner set
VerifyErr but then fell through to outcome.Passed = true, so a crashed
run could be recorded as a pass. Return before the verification block
when VerifyErr is already set.
- A task now passes only when every iteration passes. The previous
"any iteration passes" rule let a flaky fail hide behind one good run.
- Each invocation copies its workspace fixture to a fresh temp dir and
runs the agent + verifier there, so mutating tasks (edit/fix/refactor)
can't dirty the checked-in fixtures or bleed into the next iteration.
- Trace load failures (missing/malformed trace file) are surfaced as
result warnings via a new TraceIssue field instead of being swallowed.
Tracer (internal/trace):
- Finish freezes the recorder: Counter, addSpan, and the first-event
stamps are dropped after Finish returns, so a snapshot captures exactly
one turn and late stamps can't mutate it.
- WriteText propagates the first write error instead of silently
swallowing sink failures.
Provider seam (internal/providers/providerio):
- FirstTokenAt is stamped only after a payload is accepted as real model
output, not before handle() decides to drop it as an error payload.
Agent loop (internal/agent):
- The compaction counter increments only when the history actually
shrinks, in both the proactive and reactive paths — paid no-ops no
longer inflate the compaction total.
- Document on Options.Trace that a fresh Recorder is required per Run.
CLI (internal/cli/exec):
- Finish the trace at the agent.Run boundary and defer only the
serialization, so the snapshot covers exactly the turn.
- Reject --trace / ZERO_TRACE for spec-draft runs with a clear error
instead of silently accepting and writing nothing.
Manifest + fixtures:
- Strengthen the edit verifiers: rename and value-bump tasks now assert
the old symbol is gone, and the getter task greps the method signature.
- Add the missing testdata/edit fixture (10 edit tasks referenced a
directory that was never committed, so the whole edit class errored
out at run time).
- The manifest test now stats each fixture so a missing dir fails at
load time instead of at every run.
- longproc benchmark keeps Process live across the loop; README code
fence gets a language tag and documents the per-invocation fixture copy.
- Add tests for the tracing wrapper (nil vs wired recorder, OnUsage
forwarding, token aggregation) and the frozen-recorder contract.
* Address review feedback: exclusive-time attribution + wired spans + fix-suite compile
Rewrite the trace attribution model so concurrent/nested spans no longer
double-count. Spans record wall intervals; the recorder derives a parent for
each by interval containment and computes exclusive time (duration minus the
union of its children). AttributedDuration sums only top-level spans; Coverage
is the union of intervals over wall, capped at 1, the honest ">=95%" metric.
Top-latency ranking uses exclusive time so shares sum to ~1 instead of being
inflated by overlapping provider_connect/generation and nested
permission_wait/tool_execution.
Wire the spans that were named but never stamped: verification around the
self-correct verify pass, and StampFirstVisibleEvent on the first forwarded
text event. Drop the tool_queue/process_wait/persistence constants that had no
stamps, and rename the misnamed near-noise prompt_build span to tool_partition.
Trim RequiredEventKeys to events a healthy short run actually emits; move
conditional phases (tools, permission, compaction, verification) to
OptionalEventKeys so a short trace does not false-fail.
Make ReadNDJSON fail loudly on a corrupt file: require a type:trace header,
error on span/counter lines that appear before it, and error when a header
yields no spans or counters.
Fix the blocking fix-suite compile error: Label's %d format verb on a string
tripped go test's vet before any fix task could verify. Make it a runtime
wrong-prefix bug ("admin-" vs "user-") that still type-checks, so each fix
task is independent again.
Manifest: correct refactor-04's stats.go to main.go, reword fix-07 to the
wrong-prefix bug, add a latency-only description (read-only tasks carry no
verification oracle by design), and frame the report README on exclusive time
and coverage.
Tests updated for the occurrence/exclusive/coverage model; trace, perfbench,
and agent green under -race.
* Fix exclusive-time round-trip, identical-interval nesting, and empty-trace parse
Three correctness bugs in the attribution model found by an adversarial review
of the prior commit, all undermining the no-double-count guarantee:
1. exclusive_ms:0 was overwritten with the inclusive Duration on re-parse. A
parent whose children tile its interval legitimately has exclusive time 0;
WriteNDJSON emits exclusive_ms:0, but ReadNDJSON's "<= 0 means missing"
fallback turned that back into the full duration, so every re-parsed trace
re-introduced the double-counting the model exists to prevent (the benchmark
harness, which ranks re-parsed traces, inherits it). Gate the fallback on
key ABSENCE, so a written 0 is preserved.
2. deriveNesting formed a 2-cycle for two spans with identical [start, end]
intervals: the symmetric containment check made each parent the other,
dropping both from top-level and zeroing AttributedDuration. Break the tie
deterministically — strict containment is an unambiguous parent; for
identical intervals, only the lower-indexed span may parent the other, so
one stays top-level.
3. ReadNDJSON returned a valid empty TurnTrace for empty/blank-only input, so a
run that crashed before emitting a trace (or where --trace was not honored)
masqueraded as a clean zero-attribution sample. Empty input now errors, so
the harness records a TraceIssue.
Also: decode counters via json.Number so int64 values above 2^53 round-trip
exactly instead of losing precision through float64; and drop the harness's
own "exclusive <= 0 -> Duration" ranking fallback, which was the same
double-count on the re-parsed path. Added regression tests covering the
zero-exclusive round-trip, the identical-interval nesting, empty-input
rejection, and counter precision.
* perf(turn-bench): split pass/fail into oracle tiers so the pass rate can't be misread as correctness
The turn benchmark counted any exit-0 task as passed, including the 24
read-only tasks (nav/longproc/longctx/parallel) that carry no verification
oracle — so the JSON tasksPassed / "N/M passed" headline could read as a
correctness verdict it never was. Split pass/fail into three oracle tiers:
- correctness (edit grep + fix go test): the only pass rate that can move
with model quality (tasksVerified / tasksPassed / correctnessPassRate)
- build-only (refactor go build): a non-positive oracle, reported as
buildPassRate and excluded from correctnessPassRate; the manifest declares
buildOnlyClasses: ["refactor"]
- latency-only (no oracle): counted in latencyOnlyTasks, never in any pass
rate
NewTurnExecRunner no longer sets Passed=true for tasks with no
verificationCommand, and the summary headline names each tier explicitly so
an exit-0 read-only run cannot inflate a correctness number. Bumps
TurnSchemaVersion to 2. Class breakdown and tier contract documented in
internal/perfbench/MANIFEST.md and reports/README.md.
Also install the trace first-token/visible-event forwarding handlers in
agent.Run whenever options.Trace is set, not only when a UI OnText /
OnReasoning callback is set, so a headless traced run (zero exec --trace)
still captures FirstTokenAt. forwardedVisibleText stays tied to the user
callback so stall-retry semantics are unchanged. Adds a regression
assertion to the existing traced-run test.
* Address CodeRabbit review on 2bfb3406: omitempty + crash visibility
Three findings from CodeRabbit's review of the 3-tier pass-rate fix:
- BuildPassRate dropped its omitempty so an explicit 0.0 (all refactor
tasks fail to compile) is no longer indistinguishable from 'no build
tasks ran' in the JSON. Matches CorrectnessPassRate's always-serialize
behavior, which is the whole point of the tier split: the report
cannot be misread.
- A crashed sample (outcome.Err) now emits a Warning mirroring the
TraceIssue path, so a run that died every iteration can't look like a
normal benchmark with fewer measurements instead of a failure.
- cmd.Run()'s returned error is preserved on the no-run_end path: when
stderr is empty and Run failed (binary missing, exec permission
denied), the actual OS error is reported instead of collapsing to the
generic 'missing terminal run_end event'.
go build/vet/gofmt clean; go test -race green for perfbench/agent/trace.
* Address CodeRabbit re-review: anti-averaging README + fixture-isolation test
Re-review at d0615249 asked for the pass-rate contract to be loud to
downstream consumers and for the fixture-isolation property to be asserted,
not just read from code.
- reports/README.md gains a prominent 'do not average the tier pass rates /
do not report a single pass rate' warning. The schema offers no headline
pass rate on purpose; a consumer must name the tier it is reporting. This
is the durability fix for the misread the tier split exists to prevent.
- turn_bench_test.go gains TestCopyFixtureIsolatesSourceFromMutation: copies
a fixture, mutates the copy, and asserts the source is byte-identical
(and that a file added to the copy never appears in the source). Proves the
'fixtures stay clean across runs' property without needing the binary.
Items the re-review also raised that were already satisfied: the
oracle-presence-over-declared-list precedence is documented on the
BuildOnlyClasses field (taskbench.go), and the PR body already says
'48-task manifest'. The Share->exclusiveShare rename is tracked in #701.
go build/vet/gofmt clean; go test -race green for perfbench.
* feat(cli): wire MCP serve WorkspaceRoot and --add-dir scope
Pass the resolved workspace into mcp.ServeOptions and honor --add-dir so
resources/list and scoped tools can expose extra roots beyond cwd.
* fix(cli): keep lexical serve --add-dir roots for path matching
Use symlink-resolved paths only for deduplication so Scope roots stay
aligned with the un-evaluated WorkspaceRoot MCP serve already passes.
The launcher recording a spawn and the job's Runs counter incrementing
are sequential but distinct steps in the scheduler goroutine
(fireIfIdle's Spawn call, then run's job.incRuns()). The test polled
only the launcher's recorded count, then asserted Runs immediately
with no wait, so a scheduler goroutine preempted between those two
steps could be observed with a stale Runs value under CI load. Wait
for Runs itself instead of assuming the launcher signal implies it.
* fix(windows): retry atomic file renames on Access is denied / Sharing violation
* test(swarm): add unit tests for rename retry and non-retryable errors
* test(swarm): skip TestMailboxRenameRetry on non-Windows platforms
* fix(sandbox): scrub sensitive provider credentials from sandbox env
* refactor(sandbox): unify environment creation and reduce lines of code
* fix(sandbox): forward workspaceRoot through sandboxEnvironment, gate Windows env on backend
* style(sandbox,swarm): remove stray blank lines flagged by gofmt
* refactor(fsutil): extract shared rename retry helper, derive scrub list from provider catalog
Address CodeRabbit review feedback:
- Add internal/fsutil.RenameWithRetry with an injectable rename override and
move the four duplicated renameWithRetry/isWindowsSharingViolation copies
(cron, sessions, sandbox, swarm) onto it. Mailbox keeps its rename test
seam by passing its field through. Add fsutil tests for the Windows retry
and non-retryable paths.
- Remove the orphaned metadata.json.tmp in cron writeJob when the rename
permanently fails, matching the sibling writers.
- Derive scrubSensitiveEnv keys from providercatalog AuthEnvVars plus a
static list of non-catalog secrets, so new providers are scrubbed
automatically. AWS_PROFILE and GOOGLE_APPLICATION_CREDENTIALS stay
because they are pointers, not secrets.
* fix(sandbox): deny sandboxed reads of cloud credential stores by default
Address CodeRabbit finding that scrubbed env pointers still left the
underlying credential files readable under the read-all workspace posture:
- Add credentialDenyReadPaths: default profile-level deny-read entries for
~/.aws, ~/.config/gcloud, ~/.azure, and the GOOGLE_APPLICATION_CREDENTIALS
target file, wired into both permission profile builders so the seatbelt
and Linux helper backends enforce them. Entries are stat-filtered and a
store nested under a user AllowRead entry is dropped, keeping an explicit
opt-out.
- Keep the defaults out of Policy.DenyRead, whose emptiness gates escalated
execution, and skip Windows so the profile deny list does not flip the
runner off the WRITE_RESTRICTED token path.
- Scrub GOOGLE_APPLICATION_CREDENTIALS from the sandbox env; keep AWS_PROFILE
since the deny-read rule on ~/.aws is the real protection and the SDKs
fall back to the default profile regardless.
- Add credential deny path tests, extend the scrub test, relax the profile
test's exact deny count to containment.
* test(cli): pin HOME in sandbox policy golden test
The default credential-store deny-read entries depend on what exists in the
real home directory (the macOS CI image ships ~/.aws), which leaked host
paths into the policy JSON golden comparison. Point HOME at an empty temp
directory so the golden stays hermetic.
* fix(sandbox): protect GOOGLE_APPLICATION_CREDENTIALS without a home, retry lock violations
Address CodeRabbit review feedback:
- credentialDenyReadPaths no longer returns early when the home lookup
fails; home-based candidates become conditional and the
GOOGLE_APPLICATION_CREDENTIALS target is always considered.
- fsutil.RenameWithRetry also retries ERROR_LOCK_VIOLATION (errno 33),
matching the mcp lock handling; helper renamed to
isWindowsSharingOrLockViolation.
- Extend tests: homeless GOOGLE_APPLICATION_CREDENTIALS case and a lock
violation step in the retry sequence.
* fix(sandbox): tighten env-scrub test assertion and add missing secret keys
TestScrubSensitiveEnv only checked an allowlist plus a length count, so a
duplicate allowed key silently replacing a required one would still pass.
Compare the exact expected key/value map instead.
Also add ZERO_WEBSEARCH_API_KEY and ZERO_DAEMON_REMOTE_TOKEN to
scrubSensitiveEnv's sensitiveKeys list: both are real bearer secrets read
from the environment but were missing from the scrub list, leaving them
readable by sandboxed commands when set in the parent shell.
* fix(tools): classify silent wrapped Windows command failures as sandbox denials
A Windows restricted-token sandbox failure is often completely silent:
when the token cannot open the target executable or its DLLs (or an
MSYS runtime dies during init), the command exits nonzero having
written zero bytes to stdout and stderr. The existing detection is
keyword-based, so these failures were never marked as sandbox denials,
the agent loop never offered the unsandboxed-retry prompt, and the
model was left staring at 'Command completed with no output' until it
gave up.
Treat a wrapped command on the Windows restricted-token or elevated
backend that exits nonzero with completely empty output as a likely
sandbox denial. A command that legitimately fails silently (findstr
with no match, for example) now costs one extra approval prompt; the
inverse misclassification silently strands the session, so the trade
goes to prompting.
* test(tools): cover the elevated Windows backend in the silent-denial test
The heuristic treats windows-elevated identically to
windows-restricted-token, but only the latter was exercised.
Parameterize the silent-failure test over both backends.
* fix(keyring): pass generic password via stdin on macOS
Pass the generic password secret to security add-generic-password via stdin instead of passing it as a command-line argument. This prevents the secret from leaking to the local process list (visible via ps) and aligns the macOS keyring implementation with the Linux secret-tool implementation.
* fix(keyring): pipe secret twice for macOS security password+retype prompt
The macOS security add-generic-password command prompts for both a password and a retype confirmation when -w has no trailing value. The previous stdin approach only piped the secret once, causing a passwords don't match failure. Write the secret twice separated by newlines to satisfy both prompts.
* fix(keyring): reject multiline secrets on macOS instead of corrupting them
Addresses jatmn's review:
- security's -w password+retype prompt reads stdin line by line, so a
secret containing its own newline can't be distinguished from the
password/retype separator: the first line read back would silently
truncate the stored value. Set now rejects a secret containing \r or
\n on darwin before invoking security, rather than storing a
corrupted value. Linux's secret-tool has no such restriction (reads
the whole stdin payload), so it is unaffected.
- Updated the package doc comment, which still described the old
argv-based (process-list-exposed) macOS path this PR replaced.
Added TestKeyringSetRejectsMultilineSecretOnDarwin and
TestKeyringSetAllowsMultilineSecretOnLinux.
* fix(keyring): drive security -i for macOS Set instead of the -w prompt
The trailing -w prompt uses getpass(3), which reads from /dev/tty whenever
the process has a controlling terminal, so the piped secret was ignored in
any interactive session, and getpass's small fixed buffer would truncate
long secrets (like the base64 OAuth blob) when the fallback did engage.
Interactive mode reads whole commands from stdin, keeping argv at just -i.
Arguments are quoted for SecurityTool's split_line parser (backslash and
double quote escaped inside double quotes). The parser is line-based with a
4096-byte buffer, so Set rejects newlines and oversized payloads up front
rather than corrupting the stored value.
* feat(tui): press up to edit queued messages
Pressing up with a message queued pops it back into the composer for
editing, taking priority over history recall. While a message is queued
the empty composer shows a hint placeholder. A second prompt queued
during the same run now stacks under the first instead of replacing it.
* refactor(tui): remove openclaude references from queued_message comments
Removing the WRITE_RESTRICTED flag in #612 made the restricted-SID check
apply to reads as well as writes. Default Windows DACLs grant
BUILTIN\Users rather than any SID in the token's restricted list
(random capability SIDs, logon SID, Everyone), so the sandboxed process
could no longer open any executable or non-KnownDlls DLL: every spawned
command failed with exit 1 and no output, including cmd builtins'
children (gh, git, where.exe). The existing
TestWindowsRestrictedTokenNestedPipeCapture smoke test reproduces the
regression.
Restore WRITE_RESTRICTED, but only when the permission profile has no
DenyRead paths. The flag makes the kernel skip restricted-SID deny ACEs
for reads, which is exactly the DenyRead bypass #612 fixed, so profiles
that configure DenyRead keep the fully restricted token and trade spawn
capability for read-deny enforcement. DenyRead is empty by default, so
the common case regains a working sandbox while #612's guarantee holds
for the profiles that rely on it.
* fix(sandbox): stop blocking git fetch/commit/add by unblocking .git writes
The sandbox denied every write under .git for shell-executed commands,
so any git operation that touches its own metadata (fetch, commit, add,
pull, merge, stash) failed under the default sandbox. Narrow the block
to .git/hooks (auto-executing scripts) and .git/config (remote URLs,
credential.helper, core.hooksPath), the two subpaths that are actually
dangerous to write; the rest of .git stays writable to git subprocesses
since those writes go through git's own invariants.
The app-level auto-allow gate for direct file-tool writes (write_file,
edit_file, apply_patch) is unaffected and still treats all of .git as
protected, since hand-editing git's internals bypasses those invariants.
* test(cli): normalize Windows path separators in sandbox policy golden
The sandbox policy golden is shared across platforms, but readOnlySubpaths
carve-outs are built with filepath.Join and render as backslash paths on
Windows. normalizePortableJSONRootString only converted a bare backslash, so
the Windows smoke run diverged from the forward-slash golden. Replace all
backslashes with slashes during normalization so the shared golden passes on
every runner.
* fix(agent): raise default and deep-mode turn budgets
The default per-run tool-turn budget of 50 was still too low for larger
multi-step tasks that span several files: agents hit the ceiling and
stopped with a "remaining work" summary instead of finishing. Raise the
default from 50 to 80.
The "deep" preset also carried MaxTurns: 50, identical to the default, so
its "larger turn budget" promise no longer held on the turn-budget axis.
Raise it to 160 so deep runs get a genuinely larger budget again.
Users can still override per-session with /turns or --max-turns (bounded
by MaxTurnsCeiling).
* test(cli): expect deep-mode MaxTurns=160 after budget raise
* fix(config): surface unknown/typo'd config fields instead of silently dropping them
json.Unmarshal ignores unknown JSON keys by default, so typos such as
"maxTurn" or "sandbox.network" were silently discarded: the user
believed a setting (e.g. a sandbox hardening option) was active while
Zero used its default. Worse, "zero doctor" reported
"config files parsed and validated successfully" even when fields were dropped.
Add a reflection-based unknown-field scanner
(internal/config/unknownfields.go) that walks the FileConfig JSON schema
and recurses into nested objects, arrays, and maps, reporting each
unknown key with its full JSON path and a near-match suggestion
("did you mean 'maxTurns'?"). The two legacy top-level aliases
(mcpServers, mcp_servers) are allowlisted so they are not flagged,
and detection only inspects json tags, so a config written by a newer
Zero with new fields still loads and merges normally — validate/doctor
just surface the unknown keys as issues rather than rejecting the file.
Wire the scanner into ValidateBytes/ValidateFile, which zero doctor
already uses, so doctor now reports the unknown fields instead of
"validation passed".
Add tests for unknown top-level keys, unknown nested keys, unknown
keys inside a provider entry, and that the legacy aliases are not
flagged.
Fixes#644
* fix(config): address review comments on unknown-field scanner
- Treat JSON keys case-insensitively (matching encoding/json), so a
valid case variant such as "MaxTurns" is not falsely flagged as
unknown. Canonical (correct-case) names are kept only for the
"did you mean" hint.
- Allowlist ProviderProfile's legacy snake_case keys (providerKind,
catalog_id, base_url, api_key, ...) that ProviderProfile.UnmarshalJSON
accepts but which are not fields on the Go type, so existing
configs using them are not false-positive'd in zero doctor.
- Make the near-match suggestion deterministic: sort candidates before
picking so an edit-distance tie always resolves to the same lexical
winner (map-range order was nondeterministic and could flake).
- Make the unknown-field test assertions order-independent (search by
FieldPath instead of assuming issues[0]).
Add regression coverage for legacy provider keys and valid case
variants not being flagged.
* fix(lock): prevent POSIX lock file overwrite and leak on Windows/Unix
During lock reclamation, reclaiming a suspected stale lock renames the file aside and renames it back if not stale. On POSIX systems, the rename back silently overwrites any new lock file created in the gap. On Windows, it fails to rename back and leaks the stale file.
Introduce a cross-platform restoreLockFile helper:
- On POSIX: Use os.Link to link the file back (which atomic-fails if the target already exists), then remove the temporary link.
- On Windows: Use os.Rename (which safely fails if the target exists).
If restoring fails, delete the temporary file immediately to prevent leaks.
* fix(lockutil): fix Windows build by using golang.org/x/sys/windows
Addresses jatmn's follow-up review: the required Windows smoke check was
failing because syscall.MoveFileEx is not exported by the standard
library's syscall package on this platform, so internal/lockutil (and
everything importing it: cron, daemon, hooks, oauth) failed to compile
on Windows.
Switched to golang.org/x/sys/windows, which does export MoveFileEx with
the same signature, already a direct module dependency. Verified on a
real Windows machine that the no-flags call still fails with
ERROR_ALREADY_EXISTS when the destination exists, and that this
satisfies errors.Is(err, os.ErrExist), which cron/daemon/hooks/oauth's
reclaim paths all depend on to decide whether the sidelined lock was
genuinely superseded (safe to discard) versus some other, unrelated
failure (must be preserved).
TestRestoreLockFile already covered both the successful-restore and
fail-when-target-exists cases; it now passes on Windows.
* fix(lockutil): route lock file deletes through RemoveLockFile with Windows retry loop
* fix(lockutil): close restore split-brain and unify RemoveLockFile
RestoreLockFile could fail with errors other than os.ErrExist (hardlink-
incapable filesystems such as FAT or some FUSE/network mounts, ENOSPC,
Windows sharing violations). Callers only clean up on os.ErrExist, so any
other failure left the lock path missing with the live holder's lock
stranded in the sidelined file; the next O_EXCL create then succeeded and
two processes held the lock. RestoreLockFile now falls back to an O_EXCL
copy in that case, which preserves the no-overwrite guarantee, and a
successful restore with a failed sidelined-file cleanup reports nil
instead of a failed restore.
RemoveLockFile now has one cross-platform contract: removing an already
missing file reports nil on POSIX too, matching Windows, and daemon
release() drops its caller-side ErrNotExist filter.
Tests: TestRestoreByCopy and TestRemoveLockFile run on all platforms;
Windows-tagged tests pin the ERROR_ALREADY_EXISTS mapping to os.ErrExist
and exercise the RemoveLockFile retry loop to success and to bounded
exhaustion. The package doc comment documents the shared contract.
* refactor(swarm): extract reclaimStaleLock to mirror other lock callers
The stale-lock reclaim in acquireLock was inline, so its restore path
(a holder rotated a fresh lock in the gap between the stale check and
the rename) could not be regression-tested the way cron, daemon, hooks,
and oauth test theirs. Extract it into reclaimStaleLock with the same
shape as the other callers, behavior unchanged, and add the mirrored
regression test.
* test(hooks,oauth): add stale lock reclaim regression tests
Mirror the cron reclaim test in the two packages that lacked coverage
for reclaimStaleLock: a genuinely stale lock is reclaimed, a fresh lock
(reacquired in the gap) is restored intact rather than stolen, and a
missing lock reports no reclaim. daemon already had equivalent tests in
lock_test.go.
* fix(lock): fail closed and drop sidelined file when restore fails
A non-os.ErrExist error from RestoreLockFile means both the no-replace
restore and its O_EXCL copy fallback failed, so the lock path may be
missing while the sidelined holder is live. Callers previously swallowed
that error and their next O_EXCL create would succeed, breaking mutual
exclusion. reclaimStaleLock in cron, daemon, hooks, oauth, and swarm now
returns an error for that case and the acquire loops fail closed instead
of re-acquiring.
The sidelined .stale.* file is now removed on every restore failure, not
only os.ErrExist: once the restore has failed it has no protocol
function (release only consults the lock path), so keeping it only
leaked files.
Also replace the numeric errno literals in the Windows RemoveLockFile
retry loop with windows.ERROR_SHARING_VIOLATION and
windows.ERROR_ACCESS_DENIED.
* refactor(lockutil): extract shared ReclaimStaleLock helper
Consolidate the duplicated reclaimStaleLock functions from cron, hooks,
oauth, and swarm into lockutil.ReclaimStaleLock. Each caller now passes
an mtime-based isLive predicate to the shared helper, which owns the
rename-aside, restore-if-live, cleanup, ErrExist handling, and
fail-closed error propagation.
Daemon keeps its own reclaimStaleLock because it uses PID-based liveness
(different predicate shape and no staleAfter duration).
The per-package reclaim regression tests are removed since the shared
helper is thoroughly tested in lockutil/reclaim_test.go (dead lock
reclaimed, live lock restored, missing lock, fail-closed on restore
error, sidelined file dropped when new holder wins).
* fix(lockutil): propagate non-contention rename failures from ReclaimStaleLock
A rename-aside failure that is not a lost race previously mapped to the
benign lost-race result, so acquirers spun until their deadline and
reported a timeout instead of the real failure. Keep only a missing
source and the Windows sharing-violation/access-denied contention
errnos benign (neither Windows errno maps to os.ErrExist, and
ERROR_SHARING_VIOLATION does not map to os.ErrPermission either, so the
classification compares raw errnos) and return everything else so
callers fail closed.
Also convert daemon's private reclaimStaleLock to the shared helper so
it picks up the same contract, and reword the caller error messages
from "restore reclaimed" to "reclaim stale" since the error can now
come from the rename aside as well.
* fix(lockutil): publish restore-by-copy atomically and honor lost mailbox reclaims
restoreByCopy created the destination lock file empty before copying into
it, so a crash mid-copy could leave a live holder's lock permanently
unrepresented at the lock path. Stage the copy under a private name and
publish it with the platform's no-replace primitive instead.
swarm's mailbox lock discarded the reclaimed boolean and always retried
immediately, so a lost reclaim race (or Windows sharing-violation
contention) could hot-spin past the lock timeout instead of falling
through to the bounded wait like the other lock callers.
* fix(lockutil): shrink the reclaim/restore window with a fast replacing rename
Restoring a lock that turned out live went through the no-replace path
(plus its copy fallback on some failures) first, which is slow enough
that a fourth process's unrelated O_EXCL create could win lockPath while
it was absent for the whole call. RestoreLockFile's no-replace contract
would then report os.ErrExist and the caller silently dropped the
sidelined lock, orphaning the still-running original holder.
restoreLiveLock now tries a single replacing rename straight back first,
falling back to the no-replace path only if that fails. It shrinks the
window from a whole restore call down to roughly one syscall; it does
not close it, since the fast path can silently overwrite a competing
lock rather than detect it. A fully race-free reclaim would need an
OS-level advisory lock checked non-destructively instead of by moving
the file, which is a larger change than this.
* docs: add Go code quality & security checks and bump Go version to 1.26+
* docs: address CodeRabbit review comments and use pinned versions and Go 1.26.5+
* docs: remove trailing blank lines at end of AGENTS.md
* docs: add missing /v2/ segment to golangci-lint install path
The go install command pointed at the v1 module path
(golangci-lint/cmd/golangci-lint), which does not resolve for
v2.12.2. The go run invocation earlier in the same section already
had the correct v2 path.
* docs: trim AGENTS.md below 8 KiB guideline and clean up README cross-compile header
* docs: address CodeRabbit review feedback on extending guide
When writing credentials or generating user secrets, files are written using a write-to-temp-then-rename pattern. However, neither package called Sync (fsync) on the temporary file before closing and renaming. If a crash or power failure occurred shortly after write, this could result in truncated or 0-byte key/credential files on disk.
Add tmp.Sync() calls to writeNewSecretFile and Store.write to guarantee durability.
* fix(plugins): resolve relative executable paths against plugin root
When a plugin registers a tool or a hook command as a relative path (e.g. ./tools/helper.sh), running it in the caller's workspace CWD allows local execution hijacking by placing a malicious script at that path in the untrusted workspace. Update expandPluginRootPath to resolve relative executable paths containing path separators to absolute paths inside the plugin's install directory.
* fix(plugins): remove ineffectual permission initializer in toolSafety
The initial assignment to permission was always overwritten by one of
the switch arms below it, including a case that just reassigned the
same PermissionPrompt value the initializer already held. Flagged by
ineffassign in CI.
* feat(npm): ship the native binary as platform optionalDependencies
Replace the postinstall downloader with Codex-style platform packages:
suffixed versions of @gitlawb/zero (X.Y.Z-<platform>-<arch>) carrying the
binary, sandbox helpers, and the vendored agent-browser/tuistory tree,
referenced from the wrapper via npm: aliases in optionalDependencies.
The published wrapper has no lifecycle scripts and no dependencies, so
npm/Bun/pnpm installs are silent: no EBADENGINE from agent-browser's
node>=24 engines pin, no allow-scripts warnings, no network outside the
npm registry. The old downloader remains as a checksum-verified first-run
fallback for --omit=optional installs and unsupported platforms.
scripts/npm/build-platform-packages.mjs assembles the payloads from the
release archives at publish time: it materializes npm's symlink .bin
shims into regular sh shims (npm pack silently drops symlinks) and prunes
agent-browser's other-platform binaries (~65 MB per package). The publish
job uploads platform versions first under --tag platform, asserts the
latest dist-tag survived (platform versions are semver prereleases of the
wrapper version), then publishes the wrapper.
See docs/NPM_PACKAGING.md for the architecture and publishing rules.
* fix(npm): address PR review — LICENSE in payloads, dist-tag lookup guard, accurate fallback and platform docs
- Ship the repo LICENSE in both the wrapper and platform payloads (npm only
includes a license file physically present in the packed directory).
- Guard the platform-publish dist-tag lookup with || true so a transient
npm view failure (or a bootstrap publish with no latest tag) cannot abort
the job between the platform and wrapper publishes.
- Gate the wrapper's fallback downloader on the release matrix so platforms
with no asset (windows-arm64 and unknown combos) skip the spawn instead of
attempting it every run; keep deliberate retry-on-failure for supported
platforms and say so honestly in the notice and docs.
- Correct Windows support wording everywhere: x64 only, ARM runs under
emulation (README, README_ZH, INSTALL.md incl. the release-target list).
Interactive TUI always has a session ID, so every completion request
forwarded OpenAI's prompt_cache_key. Strict openai-compatible gateways
(e.g. NVIDIA NIM) reject unknown fields with a 400, while plain zero
exec usually has no session and omits the field.
Disable prompt_cache_key for ProviderKindOpenAICompatible; keep it for
official OpenAI. ZERO_DISABLE_PROMPT_CACHE_KEY remains a global kill
switch.
Fixes#624
Co-authored-by: KRATOS <[email protected]>
When executing a security-critical beforeTool hook, if the hook command fails to launch (e.g. binary not found, missing execute permission), it previously failed open and let tool execution proceed.
Update classifyResult to return AuditBlocked, true when a launch error occurs on a beforeTool hook, enforcing a fail-closed policy. Observational afterTool hooks still fail open.
Inside fireJob, the Mutate transaction callback previously returned the stale in-memory job copy (read at tick start). This clobbered any concurrent updates made to the job (such asExpr, Prompt, or Cwd edits) while the job was running.
Update the callback to apply schedule and status changes directly onto the fresh current job loaded from disk, and return current.
When a run is completed or canceled (agentResponseMsg) while an askUser prompt is pending, or when a stale/superseded askUserRequestMsg is received, the answer callback is now invoked with nil. This unblocks the waiting agent loop goroutine, preventing goroutine leaks and runner hangs.
When parsing CLI flags, positional prompt text placed immediately after flags requiring values (e.g. --auto, --notify, --max-turns) would be greedily consumed as their value by nextFlagValue. Refine nextFlagValue to validate choices/types (autonomy levels, notify modes, integers) to detect invalid values early and fail validation rather than eating positional arguments.
When falling back from a failed PTY start to a pipe execution, the command attributes are reset. Previously, resetExecCommandForPipeFallback set command.SysProcAttr = nil, which stripped custom settings like Windows CmdLine quoting. Update the fallback logic to restore the original SysProcAttr instance, and add TestStartExecProcessPTYFallbackPreservesSysProcAttr to cover.
Using unqualified taskkill / taskkill.exe commands on Windows can allow binary hijacking under certain conditions. Update all process termination callers on Windows to resolve the absolute path to taskkill.exe under System32 (referencing SystemRoot/windir environment variables, falling back to C:\Windows).
On Windows, a concurrent holder's os.Remove leaves the lock file in a 'delete pending' state, causing a racing O_EXCL create to fail with ERROR_ACCESS_DENIED (mapped to os.ErrPermission). Treat os.ErrPermission as lock contention / already-existing lock, matching the collision checks in cron, hooks, oauth, and securefile.
* fix(securefile): reclaim stale lock files to prevent permanent DOS
When createSecretFile fails to acquire the O_EXCL lock because it already exists, check if the file is stale (older than 10 seconds). If so, atomically reclaim it via a rename-aside check, preventing a permanent DOS after abrupt process crashes. Update the lock file to write and verify process-specific tokens, and add TestCreateSecretFileReclaimsStaleLock to cover the stale reclaim flow.
* style(securefile): gofmt const block alignment
truncateHint slices string hints using a raw byte offset (s[:max]), which can split multi-byte UTF-8 characters (like CJK characters, emojis, or accents) in half and produce invalid UTF-8 sequences. Update it to count and slice by runes to guarantee valid UTF-8, and add a unit test TestToolTitleTruncateHintRuneSafe to verify.
Currently, both gitBranchForPrompt (agent) and gitBranch (tui) check for a .git entry directly inside the current working directory. When starting Zero in nested folders/subdirectories of a repository, the check fails and the branch segment is omitted.
Export findProjectGitRoot as FindProjectGitRoot in agent package, and use it in both functions to resolve the correct repository root before checking HEAD and resolving the branch name. Also resolve relative worktree gitdirs relative to the repository root.
On Windows, creating restricted tokens with windowsWriteRestricted (0x08) instructs the kernel to skip checking the restricted SIDs list for read operations. This bypasses DenyRead path policies on NTFS. Remove the flag to enforce restricted SID constraints on both read and write operations, and add integration test assertions to verify that DenyRead paths are correctly blocked.
* fix(agent): scope self-reported incompletion to sentences about the current objective
The detector matched inability stems anywhere in the final message, so a
conversational recap of a past exchange ("You asked if I could work
autonomously ... so I couldn't actually do it at the time") downgraded a
completed run to INCOMPLETE. Match per sentence instead, drop quoted spans,
and skip sentences that retell a past exchange. The real transcript is now a
regression test, and genuine admissions still fire, both present tense and
past tense about the current task.
* feat(exec): add --no-completion-gate for conversational callers
A chat frontend driving zero exec has an operator present, so a final
message that hands the turn back ("the sandbox blocks network egress,
approve it and I'll continue") is a complete conversational answer, not an
unfinished task. The headless completion gate still stamped such runs
INCOMPLETE (exit 4) on the honest inability phrasing, and no phrase
heuristic can fix that case because the admission is true. The new flag
maps to RequireCompletionSignal=false so conversational callers can opt
out. Default behavior is unchanged.
* fix(exec): address review findings on quote stripping and --use-spec combination
stripQuoted now removes only balanced quoted spans: an opening delimiter
that never closes is restored verbatim, so a stray quote cannot swallow
the rest of the message and hide a genuine admission from the detector.
Regression tests cover dangling straight, curly, and backtick delimiters.
--no-completion-gate combined with --use-spec is now rejected at parse
time, mirroring the --self-correct check: the spec-draft path never
consults the completion gate, so the flag would be silently ignored.
* feat(workspacetrust): add exact-match trust store for project config gating
* feat(hooks): add ExcludeProject option to LoadConfig
* feat(plugins): add ExcludeProject option to Load
* feat(cli): gate project hooks and plugins behind workspace trust
Trust check lives inside newHookDispatcherWithExtra and activatePlugins
(fail-closed by construction); trustRoot is the original launch dir so a
--worktree run inherits the source repo's trust. Callers OR the skip
reports and emit one combined stderr notice.
* feat(cli): add zero trust command (trust/list/remove)
* fix(review): key spec-draft trust on the original launch dir; cover trust CLI edge branches
Spec-draft runs (zero exec --use-spec --worktree) passed the reassigned
worktree path as trustRoot, dropping a trusted repo's project hooks
(fail-closed, but breaks worktree-inheritance). Thread the captured
pre-worktree trustRoot into execSpecDraftRun. Add tests for the trust
'remove' too-many-args and --help branches, and a resolveTrust comment
noting the per-chokepoint check must not be hoisted to callers.
* test(cli): end-to-end trust-gate coverage through agent.Run and exec --worktree
Drives the real agent loop with a fake tool-calling provider so a project
beforeTool hook actually fires (or is gated away) through production code:
gate blocks a tool call via agent.Run, and --worktree / --use-spec --worktree
key trust on the original launch dir. All three are load-bearing (RED when the
gate or the trustRoot threading regresses).
* style(cli): gofmt struct alignment in exec_spec.go
* fix(workspacetrust): compare stored trust entries literally, no symlink re-resolution
External adversarial review (codex) found a false positive: IsTrusted
re-normalized stored entries on every check (Abs+EvalSymlinks), so a trusted
path later replaced by a symlink to attacker content re-resolved to the new
target and matched. Stored entries are already canonical (normalized once at
Trust time); compare them as literals and only normalize the incoming query.
Add a regression test for the symlink-retarget case.
* feat(mcp): gate project-scoped MCP servers behind workspace trust
Closes the P0 an external adversarial review (codex) found: project
./.zero/config.json stdio MCP servers spawned before the hook/plugin gate,
an ungated arbitrary-execution path that could also self-trust the workspace.
Add ExcludeProject to config.ResolveMCP (skips the project layer) and thread a
fail-closed trust check into every MCP spawn site (exec, TUI setup+refresh,
mcp tools list, mcp check); reporting sites stay ungated. Verified the sole
server-command exec (mcp/client.go) is reachable only through the now-gated
RegisterTools paths.
* test(cli): cover default-mode beforeTool firing through the trust gate
Assert a project beforeTool hook fires in the default auto and ask permission
modes (not only under unsafe), and is blocked when the workspace is untrusted,
so the gate is verified in the mode a normal run actually uses.
* docs(cli): note MCP servers in zero trust help text and doc comment
The gate covers project hooks, plugins, and MCP servers, but the help string and
runTrust doc comment listed only hooks and plugins.
* test(cli): make workspace-trust tests portable on macOS and Windows
setTrustConfigRoot set HOME on darwin, but config.UserConfigDir is XDG-first
there (=$HOME/.config), so tests wrote trust.json and user hooks.json where the
code never read them; set XDG_CONFIG_HOME on every non-Windows platform instead.
writeMarkerHook shells out to /bin/sh, absent on Windows, so its trusted-case
marker never appeared; skip it there like writeMarkerHookScript already does.
TestRunTrustAddThenList compared `trust list` output (canonicalized via
EvalSymlinks) against the raw cwd, which diverges on the Windows runner's 8.3
short names (RUNNER~1 -> runneradmin); compare the resolved path, and add
TestRunTrustListShowsCanonicalPath to exercise that via a symlink on any platform.
* feat(cli): surface the project MCP skip in the workspace-trust notice
Project MCP servers were dropped silently in an untrusted workspace: the trust
notice covered hooks and plugins but not MCP, and app.go discarded the
resolveTrust error. registerMCPToolsForWorkspace now returns a trustSkip, gated
on a new projectMCPConfigExists check plus the previously-dropped store-read
error, and emitTrustNotice is variadic so the exec, spec-draft, interactive, and
`mcp tools list` paths all fold in the MCP skip.
The skip drives the notice only; the gate stays on resolveTrust/excludeProject,
so a trusted workspace is unaffected and an untrusted one still fails closed.
* fix(cli): print zero trust --help to stdout with a success exit
zero trust -h/--help/help routed usage to stderr with the usage exit code, unlike
every other subcommand (mcp, sandbox, skills, cron, ...) which prints help to
stdout and returns success. Align it; the unknown-subcommand path still writes to
stderr with the usage exit code.
* fix(cli): gate oauth MCP login and surface mcp-check trust notice
Two project-scoped MCP activation sites were left outside the workspace
trust gate.
zero mcp oauth login loaded a project-defined OAuth server from an
untrusted workspace and ran the full discovery/registration/token-exchange
flow against its configured URL. Gate resolveOAuthServer with resolveTrust
so an untrusted clone's ./.zero/config.json OAuth server is dropped before
login, and emit the same one-line trust notice the other spawn sites use.
zero mcp check already gated the project layer but discarded the trust-check
result and never emitted the notice, so a gated project server read as a
bare "not configured". Emit the notice on the not-found branch.
The three remaining ungated resolveMCPConfig(cwd, false) sites (backends
doctor/snapshot and the extensions listing) are enumeration-only and stay
ungated.
* test(cli): adapt MCP startup-skip tests to two-arg resolveMCPConfig
---------
Co-authored-by: Kevin Codex <[email protected]>
* fix(update): clearer error on unsupported release platform (android/termux)
zero update/upgrade fails on Android/Termux because GOOS "android" has
no published release archive. Replace the generic "unsupported release
platform: android" error with a clear, actionable message explaining
that no release builds are published for the platform, listing the
supported platforms, and suggesting a rebuild from source. The command
still fails gracefully (clean stderr message, exit 1, no panic/stack
trace) rather than crashing.
Fixes#598
* fix(update): address review feedback on unsupported-platform error
- Condense the explanatory comment for the unsupported GOOS branch.
- Replace the Unicode em dash with plain ASCII punctuation.
- Align internal/release.ReleasePlatform's error message with the
updater's so both flows give identical guidance.
* fix(update): npm-based upgrade guidance for platforms without release assets
Address review feedback: the previous message implied Android/Termux was an unsupported platform and told users to rebuild from source. Termux runs zero fine via the npm wrapper; it just has no self-updating release archive. Point users at 'npm update -g @gitlawb/zero', the documented Termux install/upgrade path, instead.
* fix(modelregistry): reject oversized models.dev cache responses
Read modelsDevFetchLimit+1 bytes instead of modelsDevFetchLimit. If the
response exceeds the 32 MiB guard, return an error and leave any
existing cache untouched.
Fixes#510
* address review: include byte count in error, make oversized test hermetic
- error message now reports actual bytes read vs the limit
- test payload is limit+1 bytes (matches the reported repro)
- test explicitly clears ZERO_DISABLE_MODELS_FETCH so it exercises
the oversized path regardless of the outer environment
* fix: warn about untracked scratch files left behind after a run
Fixes#551. Headless exec runs could leave behind debug/scratch files
(e.g. _fix_test.py, _debug.py) created by write_file during iteration,
which would then be silently swept up by a later git add -A.
- FileTracker now records brand-new files (RecordCreated/CreatedFiles),
distinct from the existing version-baseline tracking used for
conflict detection.
- write_file records a path as created only on first write, not on
overwrite of an existing file.
- After a headless run completes, exec.go checks git status for any
created file still present and untracked, and surfaces a warning via
the existing writer.warning() (works across text/-o json/stream-json).
No files are deleted automatically — a wrong guess at 'scratch' could
destroy real work, so this only surfaces what git already knows.
Co-authored-by: Copilot App <[email protected]>
* fix: address scratch warning review comments
* test: normalize created file tracker paths
* fix: track apply_patch-created scratch files
* fix: address scratch warning review feedback
* fix: tighten scratch warning lifecycle
---------
Co-authored-by: Copilot App <[email protected]>
* merge: rebase onto main, combine Windows shell guidance with #476's MSYS text
#476 merged into main and rewrote the same "Shell syntax: Windows cmd.exe..."
guidance string in system_prompt.go and shellGuidanceForGOOS in
shell_runtime.go that this branch also edits (this PR's fix for the broken
single-quoted quoting examples). Combined both into one coherent string in
each spot: the double-quote/single-quote metachar rule with correct
examples, plus #476's MSYS coreutils warning and require_escalated
mention. Merged the corresponding test assertions in loop_test.go the
same way.
internal/imageinput/clipboard.go, internal/tools/bash_tool_test.go, and
internal/tools/exec_command_test.go applied cleanly with no overlap.
* test(tools): add host shell syntax description test for exec_command
* chore: retrigger CI after infra flake
* style(tools): gofmt exec_command_test.go
---------
Co-authored-by: Vasanthdev2004 <[email protected]>
* fix(mcp): skip RFC 8414 discovery when OAuth endpoints are preconfigured
resolveAuthorizationServer performed a real network metadata discovery call even when the MCP server config already supplied both the authorization and token endpoints. When discovery blocks (offline, unreachable issuer, or test fixtures pointing at invalid hosts) the whole Login flow hangs and never reaches the browser/loopback step, so mcp oauth login could not complete.
When both endpoints are present, return them directly and skip discovery entirely; discovery remains the fallback for any endpoint the config leaves blank. This also fixes TestRunMCPOAuthLoginStoresTokens, which timed out because the loopback callback was never driven (the URL was never printed).
Removes scratch test files left over from investigation (internal/mcp/scratch_cli_test.go, internal/cli/scratch_oauth_test.go).
* fix: trim fast-path endpoints, restore fallback test, fix picker_test compile error
- Trim AuthorizationEndpoint/TokenEndpoint/RegistrationEndpoint in the
skip-discovery fast path to match the fallback path (P3 from @jatmn).
- Update TestResolveEndpointsFallsBackToConfig to only configure one
endpoint so discovery still runs and fails, exercising the fallback.
- Add TestResolveEndpointsSkipsDiscoveryWhenBothConfigured to verify
discovery is skipped when both endpoints are configured (P2 from @jatmn).
- Fix picker_test.go:771 to capture 4 return values from switchProviderModel
(pre-existing compile error on main blocking CI smoke).
* test(mcp): prove discovery is skipped via request-failing transport
The skip-discovery test passed even without the fast path, because
discovery against the invalid URL failed instantly and the config
fallback produced identical trimmed endpoints. Use a transport that
fails the test on any outbound request so the fast path is actually
what is being verified.
---------
Co-authored-by: gnanam1990 <[email protected]>
* test(config): make Resolve local-control tests env-independent
Resolve reads ZERO_PROVIDER from the environment via applyEnv, then fails with "no active provider configured" when that provider is not present in the config. This made TestResolveLocalControlFromUserConfig, TestResolveLocalControlIgnoresProjectOptIn, TestLocalControlDefaultsBrowserAndTerminalOn, and TestLocalControlExplicitGlobalDisable fail whenever the process environment happened to export ZERO_PROVIDER (e.g. an agent session), even though the tests never intended to exercise provider resolution.
Pass Env: map[string]string{} to the affected Resolve calls so the tests assert only local-control resolution and are unaffected by ambient environment variables. Verified the four tests pass even with ZERO_PROVIDER=gitlawb-opengateway set.
* fix(tui): align picker_test switchProviderModel call with 4-value return
* Fix OpenGateway credential lookup, stream error code mapping, and model catalog
* fix(providers): map semantic OpenAI stream error codes, not just numeric
Addresses jatmn's review (following up on CodeRabbit's original request):
the streamed error classifier only recognized numeric codes ("429", 401,
403 as string/float64/int), so semantic string codes OpenAI-compatible
providers commonly send instead (rate_limit_exceeded, insufficient_quota,
invalid_api_key) fell back to a generic 500 and lost their rate-limit/auth
classification.
Unified the numeric and semantic mappings into one
openAIStreamErrorStatusByCode table so both forms of the same condition
classify identically. insufficient_quota maps to 429, matching OpenAI's
own API behavior for quota-exceeded errors.
Added TestStreamCompletionClassifiesStreamErrorCode covering both forms.
* test(providermodelcatalog): cover the new gitlawb-opengateway catalog IDs
Addresses jatmn's review (completing CodeRabbit's original request):
TestModelsAreProviderScoped only asserted mimo-v2.5-pro and tencent/hy3
for gitlawb-opengateway, missing the other newly curated IDs added in
this PR (xiaomi/mimo-v2.5-pro, minimax/minimax-m3, qwen/qwen3.7-max,
google/gemini-3.1-flash-lite, z-ai/glm-5.2,
nvidia/nemotron-3-ultra-550b-a55b:free). A typo or accidental removal
in any of them would not have failed a test.
* test: cover the last catalog ID and probeProviderHealth's stored-key wrap
Addresses jatmn's second follow-up review on PR #580:
- TestModelsAreProviderScoped still missed xiaomi/mimo-v2.5 (distinct
from xiaomi/mimo-v2.5-pro) among the newly curated gitlawb-opengateway
catalog entries.
- fillAppDeps wraps probeProviderHealth the same way it wraps
newProvider, applying the stored credential-store key before
delegating, but only newProvider's wrap had a regression test
(TestFillAppDepsWrapsNewProviderWithStoredKey). Added the parallel
TestFillAppDepsWrapsProbeProviderHealthWithStoredKey so the health-check
path used by `zero providers check --connectivity`, `zero doctor
--connectivity`, and the TUI doctor panel can't silently regress back
to keyless probes.
* fix(tui): paste protection for Termux char-by-char paste
Termux context menu paste injects characters one at a time, including
newlines as raw KeyEnter events. This caused every pasted multiline
text to be submitted prematurely before the user could review it.
The fix adds a timing-based paste detector that works alongside the
existing bracketed-paste handler (tea.PasteMsg):
- Three new model fields: lastCharTime, lastKeyTime, burstCount
- Timing trackers run before any early return in case tea.KeyPressMsg
- Enter handler checks burstCount > 1 (2+ chars within 100ms = paste)
- Composer check gated with burstCount > 0 to avoid infinite composer lock
- burstCount reset at every intentional action (permission, picker,
submit, wizard, spec review, etc.) so normal typing is unaffected
The 100ms window catches all observed Termux paste speeds while
remaining under typical human inter-key intervals. The burstCount
resets at modal boundaries prevent false triggers in tests and
real usage.
* fix(tui): reset burstCount in Enter handler wizard paths
CodeRabbit review found 3 Enter-handler paths (providerWizard,
mcpAddWizard, mcpManager) that delegated without resetting burstCount.
The equivalent post-switch paths already had the reset but the
Enter-specific branches were missing it, creating a window where
stale burst state could cause false paste detection.
* fix(tui): raise paste burst threshold to >2, use injectable clock
* fix(tui): gate paste detection to Termux only, add bidirectional tests
- Paste burst detection (insert newline on rapid Enter) now only
activates under Termux (TERMUX_VERSION env var), so fast desktop
typing never false-triggers.
- Switched burst tracker from time.Now() to m.now() for deterministic
testing.
- Added 3 tests:
• TestTermuxBurstInsertsNewline — Termux + 3 chars + Enter → newline
• TestTermuxFastTypingSubmits — Termux + 2 chars + Enter → submit
• TestDesktopBurstNotAffected — Desktop + 3 chars + Enter → submit
* test: extract burst test helper, fix assertions, add reset-after-submit test
- Extracted shared burstTestModel helper + typeKeys helper to eliminate
duplication across the 3 tests (CodeRabbit nitpick).
- Added m.pending assertion to submit tests (cmd != nil alone is weak).
- Added TestBurstResetAfterSubmit verifying burstCount is properly
reset after submission — 2 chars + Enter still submits.
* test: add explicit pending check and lastKeyTime reset in burst reset test
* fix(tui): align composer-multiline guard with same burstCount > 2 threshold
* test: add TestMultilineBurstSubmits for multiline composer + 2-char burst
---------
Co-authored-by: PatrickNoFilter <[email protected]>
* fix(update): support safe symlink extraction during updates
Allow extracting symlinks from TarGz and Zip update archives to support Unix npm shim symlinks. Prevent path traversal vulnerabilities by rejecting absolute link targets and verifying that relative link targets do not escape the destination directory.
* revert(update): keep zip symlink entries rejected
Addresses jatmn's review: the stated bug (standalone update extraction
broken on Unix/macOS) is about .tar.gz archives; the zip path handles
Windows release archives. Adding zip symlink support alongside the
tar.gz fix reversed the existing zip symlink-rejection hardening
(TestExtractZipRejectsSymlinkEntry) and failed Windows CI, since
filepath.IsAbs does not reliably reject a slash-rooted target like
"/some/other/path" on Windows (which needs a drive letter or UNC
prefix to be absolute).
Reverted extractZip's symlink handling back to unconditional rejection
and removed the two zip-symlink tests that covered it. The tar.gz
symlink support and its tests (the actual fix for the reported bug)
are unchanged.
* fix(auth): persist OpenRouter API key after login
zero auth openrouter minted a key but only printed it, leaving the
provider unusable unless the user manually exported it or edited
config by hand. Now the key is saved into the credential store, the
provider profile is created/activated, and stale inline/env key
fields are cleared. Auth-failure hints also now point at zero setup
and zero auth openrouter instead of the vaguer zero auth.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(auth): sanitize minted key and roll back orphaned credential on save failure
Addresses PR review comments: trim the OpenRouter key right after
login so both the save path and the manual fallback instructions use
the sanitized value, and delete the just-written credential-store
entry if persisting the stored-key marker in config.json fails, so a
partial failure doesn't leave an orphaned secret.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
* fix(sandbox): give Windows-appropriate suggestions when blocking interactive commands
DetectInteractiveCommand already receives goos, but its remediation
text for pagers (less/more/most), process monitors (top/htop/btop/
btm), and `tail -f` hardcoded POSIX-only alternatives (cat, head,
tail -n N, ps aux) regardless of platform. On Windows none of those
exist either, so blocking e.g. `type file | more` correctly stopped
the interactive command but then pointed the model at three more
commands cmd.exe doesn't have — directly undermining the guidance
this check exists to give. Reported in the wild (screenshot showing
`more` blocked with a "use cat, head, or tail -n N" suggestion on a
Windows session).
Adds an optional windowsSuggestion per program/segment, used in
place of the POSIX suggestion when goos == "windows" — `type` for
pagers, `tasklist` for process monitors, the read_file tool for
tail -f. Non-Windows suggestions are unchanged.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* test(sandbox): cover remaining Windows suggestion overrides and fix GOOS-blind assertion
TestBashToolBlocksInteractiveCommandThroughSandbox asserted the pager
guard message always contains "cat", but on Windows it now correctly
suggests "type" — breaking Smoke (windows-latest) CI. Make the
assertion GOOS-aware. Also extend the safe_command windowsSuggestion
test table to cover most/top/btop/btm, which were missing alongside
the already-tested more/less/htop/tail -f.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
Co-authored-by: Vasanthdev2004 <[email protected]>
* fix(tools): block MSYS and WSL shells under the Windows sandbox
Git-for-Windows bash.exe and sh.exe are MSYS binaries: the MSYS runtime
secures its signal pipe and shared-memory sections with explicit DACLs
granting only the user, Administrators, and SYSTEM (sigproc.cc
sigproc_init -> sec_user_nih), so under the WRITE_RESTRICTED token the
second access check can never pass and startup dies with "couldn't
create signal pipe" or "CreateFileMapping <SID>.1", Win32 error 5. The
System32 WSL bash launcher fails equivalently: the restricted token
cannot connect to the WSL service (Bash/Service/CreateInstance/
E_ACCESSDENIED). Every executable a bare bash can resolve to fails, so
block bash and sh preflight like the MSYS coreutils from #476, mention
the indirect spawn paths (git hooks, git/gh credential helpers) in the
shared suggestion, detect the WSL launcher's UTF-16LE service-denied
stderr, and document the root cause in the runner's KNOWN LIMITATION
comment beside the Schannel note.
* fix(tui): align picker_test switchProviderModel call with 4-value return
* test(tools): cover sh.exe in Windows shell blocking test
#568 added a bool return to switchProviderModel (model, string, bool,
tea.Cmd) and updated every call site except picker_test.go:771, which
still assigned three values. That broke the internal/tui test build
and turned Smoke red on main. Add the missing receiver here.
* fix: gitignore Windows sandbox helpers and npm version marker
Add three missing build artifacts to .gitignore:
- /zero-windows-command-runner.exe — helper built by cmd/zero-windows-command-runner
- /zero-windows-sandbox-setup.exe — helper built by cmd/zero-windows-sandbox-setup
- /.zero-binary-version — marker file written by scripts/postinstall.mjs during npm install
These are generated files analogous to the already-ignored /zero, /zero.exe,
zero-termux-arm64, and zero-linux-sandbox entries.
* fix: gitignore the Linux zero-seccomp helper too
Addresses jatmn's review: scripts/postinstall.mjs copies zero-seccomp
next to zero-linux-sandbox, and README.md documents building it, but
.gitignore only covered the Windows helpers and zero-linux-sandbox.
A Linux source build or npm postinstall could still leave this
generated helper visible to git status.
* fix(tui): bypass toggleSidebar and toggleMouse global shortcuts when composer is non-empty
Allows standard readline/Emacs cursor movement keybindings (Ctrl+B and Ctrl+E) to work inside the prompt composer when typing a prompt. This prevents these keys from being globally intercepted to toggle the sidebar or mouse mode when the composer is populated.
* fix(tui): remove trailing whitespace, scope composer guard to default chords
Addresses jatmn's review:
- Removed a trailing-whitespace-only blank line in
keybinding_help_test.go that was failing the diff-hygiene CI check.
- The composerValue() == "" guard on toggleMouse/toggleSidebar applied
to the whole keyMatch(...) result, so a user who remaps either
binding to a chord that doesn't conflict with readline navigation
(Ctrl+E/Ctrl+B) lost that shortcut entirely while typing. The guard
now only applies when the match came through the default chord;
a remapped binding fires regardless of composer state.
Added TestRemappedToggleBindingsIgnoreComposerGuard covering both
bindings.
* fix(tui): treat an explicit default-chord config the same as unset
Addresses jatmn's follow-up review: the prior fix checked
!b.isZero() to decide whether a binding is a genuine, non-conflicting
remap, but a user can explicitly configure toggleMouse: "ctrl+e" or
toggleSidebar: "ctrl+b" (the same chord as the built-in default).
parseBinding gives that a non-zero parsedBinding, so isZero() alone
wrongly treated it as safe to bypass the composer guard, letting
Ctrl+E/Ctrl+B hijack keystrokes mid-sentence again.
requiresEmptyComposer now compares the resolved binding against the
canonical default chord directly (parsedBinding is a plain comparable
struct), so both "unset" and "explicitly re-affirmed to the same
chord" require an empty composer; only a binding that resolves to a
genuinely different chord bypasses it.
Added TestExplicitDefaultChordConfigStillRequiresEmptyComposer.
* refactor(tui): dedupe the composer-gated toggle check
CodeRabbit nitpick: the toggleMouse/toggleSidebar dispatch cases both
repeated !requiresEmptyComposer(...) || m.composerValue() == "" inline.
Extracted canFireComposerGatedToggle so both cases share one
expression.
* feat(tui): remember recent provider+model selections in /model picker
The /model picker's "Recent" section only ever showed the currently active
model, making it hard to switch back to a previously used provider+model pair
once you've moved on to something else (especially when the same model name
exists across multiple providers). Track a short automatic history of
provider-qualified switches instead: newest first, capped at 5, deduped by
provider+model pair (not model name alone), and selectable across providers
like any other picker row.
Closes Gitlawb/zero#562
Co-authored-by: Cursor <[email protected]>
* chore: gofmt fixes
* fix(tui): restore favorites one-row-per-model semantics in /model picker
Favorites de-dup had switched to the provider+model key, letting the same
favorited model ID surface once per provider. Revert to per-Value de-dup for
Favorites, and skip any model ID already shown under Favorites from Recent
and Catalog so favorited models don't reappear in a second group. Recent and
Catalog still de-dup among themselves by provider+model so cross-provider
rows remain distinct.
Also correct the recordRecentModel doc comment: in-memory history is updated
even without a user config path (only persistence is skipped), not a no-op.
Addresses Copilot review comments on #568.
* fix(tui): set OwnerProvider on registry catalog rows; dedupe recent-model normalization
- registryModelPickerItem now tags rows with OwnerProvider (the registry
entry's canonical provider), fixing the plain-registry fallback path (no
saved providers resolved any models) where two providers offering the same
model id would collide in pickerItemDedupKey and silently drop a row.
- Export config.NormalizeRecentModels and have
internal/tui/picker.go's normalizeRecentModelEntries delegate to it instead
of maintaining an independent copy of the same trim/dedupe/cap logic, so the
TUI and persisted-config normalization can never drift apart.
- Add regression tests for both.
Addresses remaining CodeRabbit review comments on #568.
* fix(tui): batch recent-model persistence into one write per switch; tighten tests
- Add recordRecentModels(pairs...), a batched form of recordRecentModel that
normalizes and persists exactly once per switch instead of twice (outgoing
+ incoming pair each triggered their own read-modify-write to
userConfigPath). handleModelCommand and switchProviderModel now call it
once with both pairs.
- picker_test.go: capture and assert switchProviderModel's status return in
TestSwitchProviderModelRecordsRecentHistory instead of discarding it, so a
failed switch fails at the actual point of failure.
- picker_test.go: also assert the persisted config (not just in-memory
recentModels) after the reorder/dedupe case in
TestModelCommandRecordsAndPersistsRecentHistory.
- picker_test.go: pin down the surviving Favorites row's OwnerProvider in
TestAssembleModelPickerItemsFavoritesDedupByModelIDAndHideFromOtherGroups,
and drop the tautological otherRecent assertion (other-model was never
added to recent, so it could never fail).
- resolver_test.go: add TestResolveIgnoresProjectOnlyRecentModels, covering
the case where only project config sets preferences.recentModels and user
config omits it — resolved value must stay empty.
Addresses remaining CodeRabbit nitpick comments on #568.
* fix(tui): route unresolvable OwnerProvider rows in-place; align recent-history keys
- choosePicker: only treat a picker row as cross-provider when its
OwnerProvider resolves to an actual saved provider. Registry-fallback
catalog rows (tagged with a provider *kind* string) and stale "Recent"
rows referencing a since-removed provider now fall back to an in-place
model switch instead of erroring "unknown provider".
- handleModelCommand/switchProviderModel: capture and record recent-history
entries using m.providerName (the resolved value recentModelPairsForPicker
pins the active row with) instead of the raw, possibly-empty provider
profile Name, so a no-name provider profile can no longer produce a
duplicate "Recent" row for the same switch.
- newModelPicker: scope the registry-fallback's active-model exclusion by
provider too, consistent with the provider-aware de-dup used elsewhere.
- recentModelPairsForPicker: delegate to config.NormalizeRecentModels
instead of reimplementing the same trim/dedup/cap logic.
- Remove the unused recordRecentModel wrapper.
- assembleModelPickerItems: build Favorites from recent/catalog directly
instead of allocating a concatenated copy of both slices.
---------
Co-authored-by: Cursor <[email protected]>
* fix(mcp): silence startup warning for unconfigured default servers
Firecrawl is seeded as an always-on default MCP server with no
credentials (config.DefaultMCPServers), so every fresh install prints
a loud "warning: MCP server firecrawl unavailable, skipped: ... HTTP
401" line on first launch, even though the user never configured or
touched it.
Add config.IsUnconfiguredDefault to detect a server whose resolved
config is byte-identical to its built-in default, thread it through
mcp.Server and mcp.SkippedServer, and skip the startup warning in
app.go when a skipped server is an untouched default. Servers the
user actually configured still warn loudly on failure.
Fixes#552
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(mcp): address review feedback on #563
- mergeMCPServer now marks disabledSet on the merged config whenever a
disabled toggle was explicitly applied, so an explicit re-enable
(e.g. `zero mcp enable firecrawl`) is no longer indistinguishable
from an untouched default even though the resolved value matches —
the toggle itself is the "configured" signal for IsUnconfiguredDefault.
- Tighten TestRegisterToolsFlagsUnconfiguredDefaultOnSkip to assert
presence in the Skipped() map before checking UnconfiguredDefault,
so a missing entry fails loudly instead of comparing zero values.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(config): close IsUnconfiguredDefault gap for redeclared default values
IsUnconfiguredDefault compared the resolved MCPServerConfig against
DefaultMCPServers() with reflect.DeepEqual. A user who explicitly
redeclares a default's exact field values in their config JSON (e.g.
copying firecrawl's default type/url verbatim, perhaps intending to add
credentials later) produced a resolved value byte-identical to the
default, so the comparison silently treated a real, deliberate config
entry as "unconfigured" — the same trap the disabled/enabled toggle
case was already patched for, just left open for every other field.
Add an unexported `configured` field to MCPServerConfig, set whenever
MCPServerConfig.UnmarshalJSON actually runs for a server key (built-in
defaults are seeded as Go struct literals and never unmarshaled, so
they start unconfigured). IsUnconfiguredDefault now requires both
!configured and the value still matching the default — the value check
remains as a fallback for callers that construct MCPServerConfig
directly rather than through the JSON/merge pipeline, where configured
is always false.
This also lets mergeMCPServer drop the disabledSet-specific
"mark as touched" workaround added for the toggle case, since
`configured` now generalizes it.
Adds TestResolveMCPExplicitRedeclareOfDefaultValuesIsNotUnconfiguredDefault
covering the redeclared-values case.
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
* fix(provider): stop dropping custom no-auth providers on restart
Custom OpenAI/Anthropic-compatible catalog entries hardcode
RequiresAuth as a template default for the setup wizard, not a fact
about the user's actual endpoint. Leaving the credential step blank
(e.g. a local llama.cpp server) still stamped the saved profile with
a guessed OPENAI_API_KEY/ANTHROPIC_API_KEY env var, and that same
static RequiresAuth flag then made the profile look like it was
missing a required credential on the next run, silently filtering it
out of /model.
Add a Custom flag to the catalog descriptor so both the wizard
(write side) and setupMissingCredentialEnv (read side) judge these
profiles by their own explicit APIKeyEnv instead of the catalog's
static default.
Fixes#555
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Co-authored-by: Pierre Bruno <[email protected]>
* fix(provider): self-heal legacy custom profiles stamped by the old wizard bug
CodeRabbit flagged that profiles saved before this fix could already
carry the phantom APIKeyEnv the old wizard stamped on every custom
provider (e.g. OPENAI_API_KEY), and the new custom-branch logic would
keep treating any non-empty APIKeyEnv as an explicit requirement —
leaving already-affected users' providers filtered out of /model even
after upgrading.
Treat an APIKeyEnv that exactly matches the catalog's own guessed
default as indistinguishable from unset, so already-broken saved
profiles self-heal without a config.json migration. A deliberately
different env var name (e.g. via --api-key-env) still means auth is
required.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Co-authored-by: Pierre Bruno <[email protected]>
* fix(provider): centralize custom-endpoint credential logic, fix two more surfaces
Copilot's review of the earlier fix found the same RequiresAuth-as-
authoritative bug in two more places that decide whether a saved
provider needs a credential:
- validateProviderRuntimeReady (zero providers check) would hard-error
a no-auth custom endpoint with "requires API key".
- providerWizardCredentialLabel and providerCredentialRequired (/providers
status, wizard summary) would still claim/warn that one was needed.
Added config.ProviderProfile.MissingCredentialEnv as the single source
of truth for this decision (custom-endpoint self-heal included), and
had setupMissingCredentialEnv and validateProviderRuntimeReady delegate
to it. providerWizardCredentialLabel and providerCredentialRequired
take the same Custom-aware fix directly, since their non-catalog
fallback path uses runtime-resolved provider-kind metadata that
shouldn't be collapsed into the canonical helper.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Co-authored-by: Pierre Bruno <[email protected]>
* fix(ci): request pinned Go toolchain directly
Co-authored-by: Pierre Bruno <[email protected]>
---------
Co-authored-by: Amp <[email protected]>
* Introduce opencode-go-anthropic that uses anthropic SDK for qwen and minimax models.
* Adjust naming to match convention format.
* Adjut naming to match convention.
* Update name for opencode-go-anthropic-compatible
* Update curated models for opencode anthropic and adjust test.
* Adjust filter for opencode anthropic provider and cover with tests.
* Adjust discovery model filtering - tolerate ModlIDAllowedForProvider rules.
* Change model descriptors to lowercase for minimax models.
* CLI call triggers model filtering for opencode-go-anthropic-compatible.
* feat: gate runtime model resolution on provider allowlist (PR #544 P2)
Apply ModelIDAllowedForProvider(profile.CatalogID, model) at profile
resolution and ResolveRuntimeMetadata so TUI /model and headless
--model overrides cannot escape the provider-scoped filter for
catalog-backed profiles such as opencode-go-anthropic-compatible.
resolveProfile is the single funnel for both New() and
ResolveRuntimeMetadata, so a single validation call in each return
path covers every caller (TUI command_center, exec, provider health,
context report, zerocommands). Restricted providers reject; the
default branch keeps unrestricted providers unchanged.
less/more/most now suggest `type` instead of cat/head/tail on Windows,
since those tools don't exist there. Drop `more` from the MSYS sandbox
suggestion too, since more is itself blocked as an interactive pager
and would send the model straight into that guard next.
detectShellCommandIssue also strips double-quoted spans and cmd.exe
caret escapes before matching the bash-style `cd /foo` pattern, so a
cd-shaped string inside a quoted argument (e.g. a commit message) isn't
mistaken for an actual command.
* ## Speech-to-text dictation
Adds voice dictation to Zero. Run `/voice` to enter hold-to-record mode, then hold **Space** to dictate and release to transcribe (run `/voice` again to turn it off so Space types normally). Pick a backend with `/stt-model`.
### Backends
- **Local (sherpa-onnx)** — offline, no API key. Auto-downloads a model via `/stt-model`; the engine binary is fetched once and shared across models. Family auto-detection covers the mainstream offline families (Whisper, transducer/Zipformer, Moonshine, Paraformer, SenseVoice, and the CTC families FireRedASR, NeMo, TeleSpeech, WeNet, Zipformer-CTC, Dolphin, Omnilingual — plus the encoder/decoder families Canary and FireRedASR-AED).
- **Cloud batch** — Groq and OpenAI Whisper. Keys resolve from a configured provider, the encrypted credential store, or the env var; a missing/invalid key is entered inline.
- **Streaming** — a warm local sherpa-onnx websocket server (live transcript as you speak) on desktop, or Deepgram / OpenAI Realtime.
### Highlights
- Live audio-reactive waveform while recording (real mic levels when streaming; a synthesized wave for batch).
- `/stt-model` download chooser: recommended models first, Live/Batch tag per row, size + download state, and a search filter.
- Streaming transcript is inserted live into the composer and committed on stop; batch inserts on stop. Insert-for-review by default (`stt.autoSubmit` to fire straight at the agent).
- The warm streaming server is released when `/voice` is turned off and on exit.
### Implementation notes
- No CGO and no bundled runtimes — every OS integration shells out via `exec.Command` with discrete argv (never a shell string).
- The streaming server manager mirrors the LSP manager's warm-subprocess lifecycle.
- OS-boundary code (recorders, transcribers, server) is unit-tested via injected fakes; real microphone / websocket behavior is covered by env-gated smoke tests.
### Testing
- `go build ./...`, `go vet ./...`, and the config / dictation / cli / tui suites pass.
- Verified end-to-end against real downloaded binaries + models (offline batch, streaming websocket server, and the model auto-download), including the FireRedASR-CTC and NeMo streaming transducer families.
<!-- This is an auto-generated comment: release notes by coderabbit.ai -->
## Summary by CodeRabbit
* **New Features**
* Added speech-to-text dictation with both batch and streaming modes, supporting local (sherpa-onnx) and cloud providers, including WAV/M4A detection.
* Introduced voice dictation mode with STT model selection, local engine/model auto-download, and an inline prompt to save cloud API keys.
* Added new TUI commands for voice/STT model selection and enabled F1–F12 key bindings.
* **Bug Fixes**
* Improved streaming dictation to preserve accumulated transcript partials and keep the editor region consistent.
* Refined TUI status/picker rendering, including clearer loading/search behavior and more reliable selection alignment.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
* fix(dictation): address CodeRabbit review feedback
- validateSTTConfig: add NumThreads bounds check
- downloadVerifyExtract: stage extraction into a sibling temp dir,
atomic-rename into destDir on success so a partial extract cannot
leave a truncated engine binary that passes fileExists() on next run
- startProcess: close pipe fds when cmd.Start() fails
- ServerManager.Shutdown: honor the caller's context deadline
- audioSpillDir: tighten any pre-existing directory to 0700
- startVariantDownload: refuse re-entry while a download is in flight
- maybeOpenSTTDownloadPicker: defer Provider=local persistence to
applyEngineComponents (commit-on-success), matching the cloud flow
- fetchSTTModelsCmd: bound with a 30s timeout client+context
- newSTTDownloadPickerFrom.isCurrent: compare path segments via
filepath.Base to avoid substring false-positives
* fix(dictation): harden recorder.Stop, Esc-cancel priority, streaming region
Three correctness issues from PR review:
1) recorder.Stop() panicked (nil-deref) when called on a StartStreaming
session because StartStreaming intentionally leaves r.proc nil. Reject
that misuse with a clear error. Termux's batch path also leaves
r.proc nil by design — keep that path working.
2) Esc was consumed by an active dictation session before the
confirming second Esc could cancel a pending run, so a user
mid-recording who double-Esc's to kill the run found the first Esc
swallowed by dictation. Gate dictation-cancel on the Esc not being
a pending-run confirm.
3) applyStreamingText hard-reset the cursor to regionStart on every
partial, yanking focus away from users editing elsewhere in the
composer, and stored regionStart/End as absolute indices that became
stale the moment the user typed or pasted before the live region.
Preserve the cursor when it's outside the region, and snapshot the
prefix BEFORE the region so the next partial can detect external
edits and shift [start,end) to stay aligned.
* feat(providers): OAuth login profiles and list-first /provider manager
Make multiple providers a first-class workflow: every OAuth login is now a
visible, switchable provider, and /provider manages the whole lifecycle.
OAuth logins become provider profiles:
- zero auth chatgpt / zero auth login <preset> and all four TUI login paths
(wizard + first-run, browser + device-code) now upsert a catalog-backed
profile via config.EnsureCatalogProvider after storing the token — without
stealing the active provider. Previously the token was stored invisibly:
the provider showed up nowhere and 'providers use' failed not-found.
- Switching to an OAuth provider no longer inlines the bearer as an API key,
which suppressed the runtime resolver (no token refresh, no Codex
chatgpt-account-id header → guaranteed 401s). The credential gate now
recognizes stored OAuth logins on keyless profiles.
- providers list / current report truthful credential state: stored keys
count as configured (APIKeySet honors apiKeyStored) and token logins show
'oauth login'; providers check accepts an OAuth login as a credential.
List-first /provider manager (TUI):
- /provider opens the saved-provider list: Enter activates via the shared
switch path, 'a' adds (existing wizard), 'e' opens a field-level editor
(endpoint, model, key, description, and safe rename — the stored key,
activeProvider, and live ZERO_PROVIDER follow the new name), 'd' deletes
with an inline confirm and stored-key cleanup. Esc walks back one level.
- Credential states resolve asynchronously so keychain reads never block
the render loop; 'stored key missing' surfaces broken keychain entries.
- Implemented as manager steps on providerWizardState so every existing
overlay gate, key route, and mouse hook covers it unchanged.
CLI + config parity:
- zero providers remove <name> (deletes the stored key, hands the active
pointer off) and zero providers rename <old> <new>.
- config.RemoveProvider / RenameProvider: read-modify-atomic-write; rename
migrates the credential-store entry write-new-then-delete-old so an
interruption can never lose the key.
* fix(providers): address PR #560 review findings
All six review findings validated as real; fixes with regression tests:
- Persist the apiKeyStored marker when a key is captured onto an existing
profile: mergeProfile deliberately ignores the marker (a project config
must not claim the user's stored keys at resolve time), so the user-config
WRITE path (UpsertProvider) now re-applies it — previously editing a key
onto an env/no-key profile stranded the secret in the credential store
while every ApplyStoredAPIKey gate skipped it. [jatmn P2]
- Let active-pointer recovery select OAuth-login providers:
firstUsableProvider now applies the same providerHasOAuthLogin check as
setupRequired/usableSavedProviders, so a stale activeProvider plus a saved
ChatGPT/xAI login recovers instead of forcing onboarding. [jatmn P2]
- Delete stored keys from the store BESIDE the config being edited:
providers remove and the TUI manager delete now use ProviderKeyStoreAt
(matching setup/rename) instead of the default-path store. [jatmn P2]
- Roll back the key migration when RenameProvider's config write fails, so
the store and config.json can't desync (key under the new name, config
still naming the old one). [CodeRabbit]
- Clear provider descriptions for real: new SetProviderDescription writes
the field verbatim (the upsert merge treats empty as unchanged); the
manager's editor routes description changes through it. [jatmn P3]
- Surface stored-key deletion failures in providers remove (stderr warning
+ keyError in the JSON payload) and the TUI delete status, instead of
letting a lingering secret read as a clean removal. [CodeRabbit]
* fix(providers): second review round — case-only rename, logout hint, test hermeticity
- Skip the credential-store migration on case-only renames (groq -> Groq):
the store normalizes names case-insensitively, so Set(new)+Delete(old)
target ONE entry and the delete removed the key that was just "moved".
The existing entry already serves the new name. [CodeRabbit]
- Point the delete flow's cleanup hint at the stored login that actually
exists: after a rename ({name:"codex", catalogID:"chatgpt"}) the token
lives under the catalog id, and `zero auth logout codex` would delete
nothing. oauthLoginName resolves the same FirstStored candidate the
runtime uses. [jatmn P3]
- Lock in APIKeyEnv semantics after a key edit: the env reference survives
as an explicit override (a SET env var wins at resolve time; the stored
key applies when it is absent). [CodeRabbit nitpick]
- Make main's new firstUsableProvider tests hermetic: they read the REAL
OAuth token store, so any developer with an actual xai/chatgpt login gets
spurious failures (found because this machine has one).
Also rebased onto main; the only conflict was comment wording in
firstUsableProvider, where the audit commit (#481) independently landed the
same OAuth-login fallback check this branch added.
* fix(tui): read stored keys from the active config's credential store
The TUI's write paths (SecureProviderProfile capture, rename migration,
manager delete) all target the store beside m.userConfigPath, but the read
paths still opened the DEFAULT-path store: profileWithCredential (feeding
the /model and manager switch gate), the model picker's discovery
credential lookup, and the manager's async credential-status probe. With a
non-default config path, a provider saved with only apiKeyStored had its
key in the config-adjacent store, so the gate rejected it as having no
usable credential and the manager showed 'stored key missing' for a
healthy profile.
All TUI stored-key reads now resolve through providerKeyStoreForPath
(config-adjacent, default-path fallback for ephemeral sessions), so the UI
reads from the same store it writes to. Regression test covers both the
credential probe and the switch path with a key seeded only beside the
config.
Also consolidates the OAuth test-store seeding on withAuthStore (now pins
ZERO_OAUTH_STORAGE=file so an inherited keyring backend can't bypass the
temp path) per review nitpick.
* fix(providers): resolve self-review findings — atomic edits, key normalization, threading
Findings from a multi-agent code review of this branch (8 finder angles,
independently verified); all confirmed against the code, several with
empirical repros.
Correctness:
- config.EditProvider: one atomic read-modify-write for the manager's Save
(rename + fields + verbatim description + stored-key marker + key
migration with write-failure rollback). Replaces the rename→upsert→
describe sequence that (a) turned a case-only rename (groq → Groq) into a
DUPLICATE profile via UpsertProvider's case-sensitive merge, and (b) could
fail halfway, leaving config.json renamed while savedProviders and
ZERO_PROVIDER still held the old name (retry then failed 'not found').
A rename now also migrates a freshly captured replacement key (captured
under the current name; the migration moves it).
- savedProviders is mutated surgically on manager delete/edit instead of
being replaced with the raw user-config list — the session list is seeded
from the RESOLVED (project-config layered) and usability-FILTERED set, so
wholesale replacement dropped project-contributed providers and
resurrected filtered stubs for the rest of the session.
- oauth.ProviderKey normalizes provider names to lower case at the single
write/lookup choke point: `zero auth login xAI` stored provider:xAI while
every candidate lookup was case-sensitive — a successful login invisible
to the runtime. Map-based presence checks lowercase to match.
- OAuth login persistence moved onto the Update goroutine (message handlers)
— a background tea.Cmd (device-code polls land minutes later) doing an
unlocked config read-modify-write raced UI-thread writes (lost updates).
The write error is now surfaced and the in-memory mirror is skipped on
failure, so a profile that never reached disk can't show as a working
provider that vanishes on restart.
UX / consistency:
- Esc inside a manager-launched add flow walks back to the provider list
from EVERY step (was: first step only; deeper steps destroyed the overlay
and the user's place). In-flight OAuth logins are invalidated on the way
out; footers say 'Esc back'.
- switchProviderModel returns a structured outcome; the manager branches on
it instead of strings.Contains(text, "Switched to") — UI copy is no longer
a control-flow contract (a provider named 'Switched to prod' could close
the manager on a refusal).
- Manager delete's keychain subprocess + OAuth lookup run in a follow-up
tea.Cmd (the confirm keypress no longer blocks the render loop); the
credential probe takes ONE token-store snapshot instead of 2 reads per
row, and resolved states carry over across reloads (no 'checking…' flash).
- Credential-state reporting converges: /provider status recognizes OAuth
logins (was 'api key: not set' + warning for a WORKING provider), doctor
uses the shared HasConfiguredCredential definition plus OAuth awareness
(its 'matching ProviderSnapshot.APIKeySet' claim is true again), and the
manager's classifier falls through a stale stored-key marker to env/OAuth
the way the runtime does.
* Fix provider manager test formatting
* fix: address bugs found in a multi-agent codebase audit
Five parallel review agents each swept a different area (self-update,
TUI keybindings, agent/session handling, sandbox/shell safety, and
auth/credential storage) and surfaced nine concrete defects, all fixed
here with regression tests:
- sandbox: grant_scope path comparisons were case-sensitive, letting a
persisted deny grant be bypassed by spelling a Windows path with
different case
- securefile/oauth: createSecretFile's Windows ERROR_ACCESS_DENIED
handling was only applied to the oauth token store, not the shared
credstore backend; both also masked the real lock-contention error
behind a misleading "file does not exist" timeout
- cli: firstUsableProvider ignored OAuth logins when picking a
fallback provider, forcing unnecessary re-onboarding for an
already-authenticated user
- sessions: exec prompt summarization truncated on a raw byte offset,
which could split a multi-byte UTF-8 rune and embed invalid UTF-8
into a resumed session's prompt
- tui: configurable keybindings had no collision detection, so a
remapped chord could silently make a hardcoded shortcut (or another
configured binding) permanently unreachable
- tools: the Windows shell-syntax pre-flight check wasn't quote-aware
and could block harmless commands whose quoted arguments merely
contained operator-like text
- update: checksum verification didn't cross-check the archive
filename it verified against the one being extracted; extractZip
didn't reject symlink-mode entries like extractTarGz already did;
replaceBinary's restore-on-failure rename had no retry, risking a
permanently missing binary on a transient Windows file lock
* fix: close remaining PR 481 review findings
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
* fix(tools): drop stale ; test case after rebasing onto main's MSYS check
Rebasing fix/bug-hunt-findings onto main pulled in #476, which replaced
this file's regex-based windows_shell_syntax detection with a
segment/word-anchored check and deliberately stopped treating ; as a
command separator on Windows (cmd.exe doesn't split on ; the way bash
does). detectShellCommandIssue itself came out of the rebase unchanged
from main (our quote-masking version was fully superseded by #476's
more thorough segment-based approach), but the quoted-content test
this PR added still asserted the old bash-style semantics for
`echo "foo" ; ls -la`, which now correctly returns no issue since it's
a single echo invocation with literal arguments under cmd.exe, not a
real ls invocation.
---------
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
The home screen orientation line now leads with the build version
(v0.2.0 · cwd · branch · model). Release builds already inject
internal/cli.version via ldflags; dev builds show "dev".
* feat(tui): /loop foundation — command parsing, loop state, safety bounds
First slice of the /loop feature (#501): the self-contained core with no TUI
wiring yet. parseLoopCommand handles the leading-interval, trailing-"every",
bare-self-paced, and list/stop forms; loopState models one session-scoped loop
with doom-loop + iteration-cap fields; interval/self-pace clamps and duration
formatting round it out, with unit tests. Because Zero drives loops off a Go
timer rather than a cron backend, arbitrary intervals (90s, 7m) are supported
with no whitelist limitation.
* feat(tui): wire /loop into the turn lifecycle — dispatch, idle tick, continuation
Second slice of #501. Adds the controller and wires it in:
- /loop command registered (commands.go) and dispatched to handleLoopCommand.
- Loop state on the model (loops, activeLoopID, loopSeq/loopTicking poll guards,
loopNextWake/loopDone self-pace channel).
- An idle poll tick (loopTickMsg, ~1s) fires the earliest due loop only when the
session is idle — mirrors the launchQueuedMessageIfReady guard so loops and a
user's queued prompt never collide; a self-perpetuating tea.Tick that stops when
no loops remain.
- The agentResponseMsg completion seam advances a loop iteration (schedule next
wake for fixed, model delay for self-paced) with doom-loop, iteration-cap, and
done stop conditions, restarting the ticker if other loops remain.
- /loop list|stop|stop all, footer summary + list rendering, and a guard that only
a prompt or custom /command may loop (not a built-in).
Controller tests cover start/advance/self-paced-delay/done/doom/cap/stop/busy.
* feat(tui): /loop self-paced adaptive cadence + footer summary + /clear note
Third slice of #501.
- Self-paced loops now use an adaptive cadence (2m early -> 30m heartbeat as
iterations accrue), with the loopNextWake channel kept as an override for a
future explicit model signal.
- Persistent footer segment "↻ N loops · next 3:05pm" while loops are active.
- /clear notes that loops keep running (it wipes the transcript, not the session)
so a loop never silently fires into a cleared screen.
- Tests for adaptive cadence + footer summary.
* test(tui): drive /loop end-to-end through Update (submit + stale tick)
* docs(readme): add /loop to the slash-command table
* fix(tui): stop looping on repeated failure + clear loop tag on cancel
Addresses CodeRabbit review on #502:
- advanceLoop now counts consecutive failed iterations (loopMaxFailures=3) and
stops the loop, so a loop whose turns keep erroring no longer churns to the
iteration cap (the doom guard only sees identical non-empty answers).
- cancelRun clears activeLoopID and re-arms the interrupted loop for its next
cadence, so a cancelled iteration is not left running forever and the next
unrelated turn is not misattributed as that loop's completion.
* fix(tui): finish /loop v1 — real self-paced completion, session scope, leave gate
Response to the review. The self-paced path was the real gap: it advertised
model-chosen completion but nothing ever wrote the done/next-wake fields, so it
was just adaptive polling dressed up. Replaced that with an actual control
channel — each self-paced iteration runs a short maintenance playbook and ends
its reply with a control line (LOOP: DONE / LOOP: CONTINUE [interval]) that
advanceLoop parses to stop the loop or pick the next wake. The two dead model
fields are gone; done and next-wake now come from the model's output.
Rest of the review:
- loops stop on a session switch (/new, /resume) instead of firing the previous
conversation's prompt into the new one
- validateLoopTarget resolves custom /commands up front and rejects unknowns, so
a mistyped `/loop 5m /nope` isn't scheduled and then re-sent as literal text
- a one-shot confirm gates /clear and /quit while loops are active
- age-based auto-expire (24h) next to the iteration cap
- the two CodeRabbit test nits (HasPrefix footer check, bare `/loop stop` on a
single loop)
Hardening from a self-review pass over the above:
- normalize CRLF and allow a trailing note on the control line, so
`LOOP: DONE — all clean` and \r\n replies still stop the loop
- disarm the leave-confirm before the queue/exit early returns, so an interposed
prompt can't leave it falsely armed
- a loop no longer fires behind an open picker/modal; a run launched behind the
/resume picker would otherwise complete into whatever session you switch to
* fix(tui): address /loop review round 2 — ticker re-arm, self-paced command, resume guard
- stopLoop re-arms the poll ticker after removing one loop, so stopping one of
several no longer strands the rest with no tick scheduled (jatmn).
- a bare self-paced /command is rejected with a pointer to the interval form:
self-paced drives a free-form goal via the playbook + LOOP: control line, which
a custom command's expanded template never carries, so it would silently
degrade to adaptive polling (jatmn).
- /resume only tears loops down on an actual session-id change; /resume latest or
/resume <currentID> can resolve to the already-active session, whose loops are
its own, not a "previous" session's (CodeRabbit).
- tests: skipped-behind-modal loop stays scheduled, footer carries the next-wake
time, the confirmed /clear actually wipes the transcript, plus multi-loop stop
keeping the ticker alive and self-paced-/command rejection.
* docs(readme): clarify /loop runs a prompt or custom command, not built-ins
- Remove unused safeRequestedPrefix, safeShellCommandTokens
(internal/agent/command_prefix.go), and truncateHeadTail
(internal/tools/bash.go): each was a thin wrapper with no remaining
callers.
- Drop an ineffectual assignment in stringListArgWebSearch: every
return path after it already sets the named return explicitly.
- Simplify a negated-and condition in
partition_cache_stable_test.go via De Morgan's law.
- Use strings.Contains instead of strings.Index(...) < 0 in
edit_replacers.go.
- Fix error string style (ST1005): lowercase "unsafe redirect URL"
and drop the trailing period from webFetchPublicOnlyHint.
Skipped the errcheck findings on this pass (unchecked defer
Close()/Write() errors): those are stylistic, not correctness bugs,
and this repo's CI only runs go vet, not golangci-lint.
go vet, gofmt, govulncheck, and deadcode don't catch unused private
functions/assignments reachable within a package but never called, or
staticcheck-style correctness/readability issues. deadcode's whole-program
reachability analysis specifically missed several of these; golangci-lint's
truncateHeadTail nitpick on #476 assumed it would fail CI, but nothing in
this repo actually ran it.
Scoped to unused, ineffassign, and staticcheck rather than the full default
battery, and continue-on-error like deadcode, so this surfaces the existing
findings across the repo (being cleaned up incrementally per #527) without
blocking in-flight PRs on a big-bang adoption.
* fix(tools): block MSYS coreutils under Windows sandbox
Git for Windows usr\bin coreutils (head, grep, cat, ...) are MSYS PE binaries that fail with ACCESS_DENIED and cygheap/signal-pipe errors when Zero runs them in the write-restricted Windows sandbox. Detect and block these commands before execution, surface MSYS runtime failures from stderr, steer agents toward native Zero tools or require_escalated, and exclude MSYS-prone names from known-safe command tails.
Refs #458
* fix(tools): anchor the last MSYS failure heuristic to MSYS markers
CodeRabbit review feedback: the win32-error-5 plus terminating check
had no MSYS-specific anchor, so unrelated access-denied failures could
be mislabeled as windows_msys_sandbox. Require an MSYS marker like the
neighboring checks do.
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(tools): let escalation bypass the MSYS guard and make detection quote-aware
Addresses jatmn's review on PR #476:
- bash and exec_command called detectShellCommandIssue before resolving
sandbox_permissions into a command engine, so a require_escalated retry of
a blocked command was still hard-blocked by the same preflight check.
Resolve the command engine first and only bypass the windows_msys_sandbox
issue kind when that resolves to true unsandboxed execution; other issue
kinds (real cmd.exe syntax problems) still block regardless of escalation.
- Unify all MSYS-prone command name checks (MsysProneCommandName, the
preflight scan, and transitively command_prefix.go's known-safe guard)
behind one windowsMsysProneNames set. This fixes expr (in the name set but
missing from the old regex alternations, so never proactively flagged) and
ls (hit the older windows_shell_syntax branch first, so it got different
metadata than every other MSYS-prone name).
- Make the preflight scan quote-aware: split the command into cmd.exe-
operator-separated segments respecting double-quote grouping, and only
check the first word of each segment instead of scanning raw text anywhere.
Fixes false positives on quoted text like commit messages or PR comment
bodies that merely mention a coreutil name.
* test(tools): decouple MSYS-guard bypass tests from real command output
TestBashToolRequireEscalatedMsysGuard and
TestExecCommandRequireEscalatedBypassesMsysGuardAfterApproval asserted
shell_issue == "" to prove the require_escalated bypass worked. Once
bypassed, "cat somefile.txt" actually runs unsandboxed, and its real,
PATH-dependent output could trip the unrelated post-execution
detectShellOutputIssue heuristic, failing the assertion for reasons
unrelated to the preflight guard under test.
Assert on the exit_code "-1" sentinel (set only by shellIssueBlockResult)
instead, which directly reflects whether the preflight guard blocked the
command.
* fix(tools): anchor MSYS path detection to command position, fix prefix approval gap
Address jatmn's latest review on PR #476:
- shell_runtime.go: the explicit MSYS binary-path check (usr\bin\,
mingw64\bin\, msys-2.0.dll, cygwin1.dll) ran against the raw command
string, so a quoted mention (e.g. a commit message describing a
usr\bin\head.exe failure) was still hard-blocked. It now runs against
the first word of each operator-separated segment, same as the
coreutil-name check. windowsCommandSegments also stopped treating ;
as a command separator (cmd.exe does not split on ;, unlike bash) and
now respects cmd.exe's ^ escape character, so escaped operators like
echo ^| head are no longer misread as a real head invocation.
- command_prefix.go: proposedCommandPrefix could offer to approve a
single segment (e.g. "ps aux" in "ps aux | head -5") without checking
that every other segment was independently safe. Since approving a
prefix escalates the whole command to bypass the sandbox, an
MSYS-prone or otherwise unsafe segment could ride along uncovered.
It now only proposes a segment as the prefix when every other
segment in the command is known-safe on its own.
Added regression tests for quoted MSYS path mentions, caret-escaped
operators, semicolon text, and the prefix-approval gap.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(tools): treat redirection as a command boundary, stop using command text as output evidence
Addresses jatmn's latest review on PR #476:
- firstCommandWord only split on whitespace, so cmd.exe redirection
attached directly to a command name (head>out.txt, cat<in.txt,
grep>matches.txt) was read as one word and never matched against the
MSYS-prone name set. It now also stops at < and >.
- detectShellOutputIssue scanned command+output together, so a command
whose own argument text merely quoted an MSYS failure string (e.g. a
gh pr comment --body describing the bug) could be mislabeled after
running even though the real stdout/stderr was unrelated. Removed the
command parameter entirely from detectShellOutputIssue and both call
sites (bash.go, exec_command.go), so the command line can never be
used as post-execution evidence again.
* fix(tools): remove unused truncateHeadTail wrapper
CodeRabbit nitpick: truncateHeadTailWithTotal is called directly
everywhere, so this wrapper is dead code that trips golangci-lint's
unused check and fails CI.
---------
Co-authored-by: Claude Fable 5 <[email protected]>
* feat(tools): universal token-based output ceiling with spill-to-disk
Cap every tool result at the registry boundary (16k estimated tokens,
ZERO_TOOL_OUTPUT_CEILING_TOKENS-tunable, 0 disables) unless the tool
manages its own deliberate budget. Head+tail truncation, full output
spilled to the existing redacted spill dir and re-readable via
grep/read_file, so nothing is lost — only deferred.
This closes the three unbounded paths a single call could flood the
context window through (and then re-bill every following turn):
- web_fetch: up to 256KiB default / 2MiB max of non-HTML body
- skill: full SKILL.md returned uncapped
- MCP-served tools: no budget at all
Self-budgeting tools opt out via an unexported marker interface (an MCP
server can never exempt itself): bash, exec_command (model-raisable),
read_file, read_minified_file, grep, glob, list_directory. Browser
snapshots deliberately stay under the net.
bash itself is tightened to match the unified token model: emit budget
96KiB -> 32KiB per stream (~24k -> ~8k tokens worst case per stream),
while capture retention stays at 96KiB head+tail so the new spill file
covers 6x more of the output than the transcript shows.
* perf(agent): collect post-edit LSP diagnostics off the tool-call path
Inline post-edit diagnostics blocked every edit_file/write_file result on
the language server: a >=300ms quiet-period debounce that reset on each
publish, seconds on the first edit per language, capped at 10s — the
largest recurring latency tax in an edit-heavy session.
Diagnostics are now collected in the background: a file is enqueued the
moment a mutating tool finishes, a single worker checks it while the rest
of the batch executes, and the loop drains completed results just before
building the NEXT provider request, appending errors as a user nudge.
The model always issues another request after an edit turn (to read its
tool results), so it still sees introduced errors at the same decision
point — no tool call ever stalls on the language server.
A file re-edited before its check runs is checked once in its final
state (the checker re-reads the file); re-edited after, it is re-queued
and the newer result wins. A drain that finds the worker still busy
gives up after 3s and delivers on a later turn — results stay accurate
because any further edit re-enqueues the file.
The tools-side inline mechanism (tools.RunOptions.Diagnostics) is kept
for direct API callers; the loop just no longer wires it.
* fix: address review — max-turns diagnostics drain, capture-gap marker, test hardening
- Drain background diagnostics before the max-turns final-answer request
so an error introduced by the LAST turn's edit is reported in the
summary instead of silently dropped (+ regression test).
- spillBashStreams marks the head/tail junction with a capture-gap
marker when boundedBuffer dropped the middle of a stream, so a spilled
log never reads as contiguous when it is not; junction position is
asserted in the test.
- Tests override TMP/TEMP alongside TMPDIR (os.TempDir reads TMP/TEMP on
Windows) via a shared setTestTempDir helper.
- TestBudgetBashCaptureReportsTrueTotal now asserts spill_path meta and
spill file content; exemption-list test gains read_minified_file.
* fix(test): use a real workspace root in async diagnostics tests
filepath.IsAbs("/ws") is false on Windows (no drive letter), so the
collector test's workspace-absolute assertion failed on the windows
smoke job. Root the fake workspace at t.TempDir() — absolute on every
platform — and assert against it.
* fix: pattern-scrub spill files and gate finalization on pending diagnostics
Review follow-ups (Vasanthdev2004):
- Spill files now pass the pattern-based secret scanner (AWS keys,
GitHub/Slack/OpenAI tokens, PEM blocks, JWTs) in addition to the
configured-key scrub. A bash spill runs before formatBashOutput's
scan, so without this a spilled file held in cleartext exactly the
credentials the transcript redacts. Applied centrally in
spillTruncatedOutput, covering bash, exec_command, and ceiling spills.
- Finalization diagnostics gate: a no-tool-call final answer now drains
pending post-edit diagnostics with the full inline-era budget (10s,
vs the 3s per-turn wait) before the run is accepted; introduced
errors append the nudge and give the model one more turn instead of
being silently dropped when no later turn exists. The max-turns
summary path uses the same finalization budget. Free for runs that
never edited — an idle collector returns immediately.
* feat(skills): make skill invocation deterministic and discoverable
Skills were model-pulled only: the model had to notice a skill in a
640-byte system-prompt list (~6 skills visible; the rest collapsed into
'…and N more') and call the skill tool on its own. Users could not run a
skill at all — typing /<skill-name> reported 'unknown command'. The two
halves of the fix:
User invocation
- /<skill-name> [args] now runs an installed skill directly: resolved
after builtins and user commands, the skill body is inlined as the
prompt with the typed args appended, and submitted through the same
launch path user commands use.
- /skills lists installed skills with their slash form, live from disk.
Labels are honest: a skill shadowed by a builtin, alias, user command,
or a case-colliding sibling is listed bare with a '(via skill tool)'
note instead of advertising a dead /name.
- The slash palette suggests skills (labeled '(skill)') read through the
same loader dispatch uses, so mid-session installs appear and shadowed
or case-colliding names are never advertised.
- Skill and user-command invocations now apply the plain-prompt run-state
guards: mid-run submissions queue the EXPANDED prompt (the queue flush
submits literal text), compaction-in-flight warns, exiting drops.
- Skills resolve through a lazy plugin-aware loader (default dir merged
with plugin skill roots — the same set the skill tool and the system
prompt see), TTL-cached so palette keystrokes don't re-read SKILL.md
bodies.
Model triggering
- Raise the skills-list budget 640 -> 4096 bytes: the list is the model's
only discovery surface, and the old cap made skills past ~6 invisible —
invocation reliability collapsed exactly for users invested in skills.
- Raise description truncation 100 -> 200 runes: the description carries
the trigger conditions ('use when…'); cutting them is what stopped the
model from firing the skill.
- Strengthen the instruction line: scan the list before acting, call the
matching skill FIRST, don't substitute your own approach.
* feat(tui): /skills opens a searchable skill picker
Replace the static /skills card with the same picker UX /model uses:
type-to-filter (ranked search), arrow-key selection, Enter runs the
chosen skill immediately. Selection is by the skill's exact name, so
skills the slash path cannot reach — names shadowed by a builtin or
user command, or names that don't fit a slash token — are still
runnable from the picker, where the choice is unambiguous. The text
card remains only as the no-skills install hint, and the picker path
applies the same run-state guards as slash invocation.
* feat(tui): ask-first guard for bare skill invocations
A skill invoked with no request submits only its body — instructions
with no target ("review the PR" — which PR?) — and the model improvises
a target instead of asking, which is especially wrong in a fresh
session. Bare invocations (slash and picker) now append a conditional
note: if the instructions need a target or details not already clear
from the conversation, ask first; self-contained skills still just run.
Invocations that carry a request are unchanged.
* fix(tui): review follow-ups — restore typed invocation on compaction guard, cap merged suggestions
- The compaction-in-flight guard for skill/user-command invocations fired
after the dispatch path had already cleared the composer, so the typed
"/name args" was lost and had to be retyped; thread the raw invocation
through and restore it into the composer (the plain-prompt guard keeps
the composer intact by firing before the clear). The picker path has no
typed form and restores nothing.
- Cap the merged autocomplete list at the shared bound: each source
self-caps, but three sources could stack to ~3x the palette limit.
- Tighten the shadowed-skill palette test to assert on the advertised
Name rather than the fallback Desc wording.
* chore: ignore zero-skills local build artifact
A locally built test binary under this name was accidentally committed
(and has been scrubbed from the branch history); ignore the name so it
cannot recur.
* docs: document AGENTS.md/ZERO.md and plugin manifest format
Add an "Extending Zero" section to the README covering the
AGENTS.md/ZERO.md project-instructions lookup chain and the
plugin.json manifest fields, neither of which were previously
documented outside the source.
Closes#521
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
* docs: fix plugin path scope and add per-user ZERO.md guidelines
- Correct project-scope plugin discovery to <cwd>/.zero/plugins, not
the repo root.
- Clarify that user-scope plugin discovery always resolves under
~/.config regardless of OS, separate from config.UserConfigDir()
(which is OS-aware and used for the per-user ZERO.md file).
- Document the per-user ZERO.md guidelines file added in #475.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
* fix(tui): TracerPid PRoot detection, Ctrl+U/D direction, composer guard
- Replace Termux env var detection with isRunningUnderPRoot()
via /proc/self/status TracerPid, cached with sync.OnceValue
- Mouse mode falls back to CellMotion (not AllMotion) under PRoot
to fix broken touch scrolling
- Add Shift+Up/Shift+Down before plain KeyDown/KeyUp for transcript
scroll with permission/askuser cursor + composer guard
- Add Ctrl+U (scroll up) and Ctrl+D (scroll down) with proper
direction: Ctrl+U=move up, Ctrl+D=move down
- Add guards for active modals (wizard, picker, spec review, etc.)
to avoid intercepting their Ctrl+U/D keybindings
- Tests: TestPermissionCursorCtrlU/D (direction regression),
TestShiftUp/DownComposerGuard (composer guard)
- References issue #507
* fix(sandbox): avoid faccessat2 for Termux/Android portability
Replace exec.LookPath with lookupExecutable that uses os.Stat
instead of the faccessat2 syscall. The faccessat2 syscall (439)
is blocked by the Samsung seccomp filter on Android, causing
SIGSYS termination. os.Stat uses the newfstatat/statx syscalls
which are universally permitted.
This is part of broader Termux/Android support for Zero.
* docs(install): add Termux/Android build and configuration guide
Document how to build Zero for native Android/Termux: GOOS=android
to avoid the SIGSYS crash, proot bind-mount for DNS resolution,
PRoot scroll fix, and free-tier provider setup.
* fix(sandbox): skip empty PATH segments, use platform-aware executable check
* feat(openai): forward prompt_cache_key for server-side prefix cache routing
Send the session ID as OpenAI's prompt_cache_key on every completion
request so consecutive turns route to a backend replica that already
holds the conversation prefix in its prompt cache, instead of re-billing
the full ~11k-token system+tools prefix each turn on OpenAI-compatible
endpoints (which get no cache_control breakpoints, unlike Anthropic).
Keyless requests serialize byte-identically to before, and
ZERO_DISABLE_PROMPT_CACHE_KEY=1 suppresses the field for strict
endpoints that reject unknown parameters. The Codex (Responses API)
flavor is deliberately untouched: the ChatGPT backend is a separate,
stricter surface.
* fix(openai): parse prompt-cache-key kill switch as a boolean flag
ZERO_DISABLE_PROMPT_CACHE_KEY=0 or =false previously disabled forwarding
because any non-empty value tripped the check. Parse it the same way
ZERO_FORMAT_ON_WRITE parses boolean flags, so explicitly-falsy values
are a no-op and only truthy values flip the toggle.
The editing discipline already caps the diff size and scope, but a small diff can
still over-build the solution — speculative abstraction, unrequested
configurability, handling for cases that cannot occur. Add a guardrail: solve the
problem as posed, nothing the user did not ask for; if a 200-line solution could
be 50, rewrite it.
Validated with a before/after eval on five over-engineering-prone tasks: 3/5
solutions came out simpler with the guardrail, none more complex, none broke
correctness (avg 9 vs 11 non-blank lines); the baseline gold-plated on two of them
(an unrequested cache-introspection attribute and header-merge config). No effect
on trivial tasks, where the baseline is already minimal.
Closes#516
* fix(tui): strip all ANSI escapes from copied transcript text
renderAssistantMarkdownText embeds bold markers for prose and ANSI color sequences from chroma for fenced code blocks. stripMarkdownRenderControls only stripped the bold markers, leaking ANSI codes into clipboard text. Switch to ansi.Strip() to remove all escape sequences.
* refactor(tui): extract rendering dispatch and add detailed bool to transcriptBodyItems
Extract rowRenderFn and transcriptRowDispatchFn types and refactor rendering methods into *Fn variants parameterized by the render function.
Add detailed bool parameter to transcriptBodyItems to prepare for the detailed transcript viewport. All callers pass false so there is no behavior change yet.
Extract transcriptRowBodyHeightCacheKeyOpts from transcriptRowBodyHeightCacheKey so the body cap can be configured per caller.
* feat(tui): scrollable detailed transcript viewport with sidebar suppression
Enable keyboard scrolling (PgUp/PgDown/Up/Down) in detailed transcript mode by routing through scrollChat instead of swallowing the keys.
Rewrite detailedTranscriptView to use the transcriptBodyItems pipeline so the body renders through the same viewport/scroll engine as the live view.
Implement detailedTranscriptFooter with copy-status and jump-to-bottom hint integration.
Suppress the sidebar in detailed mode so the full chat width is available for reading uncapped tool output.
* test(tui): detailed transcript scroll with PgUp/Down and Up/Down arrows
TestPgUpDownScrollsDetailedTranscript verifies that PgUp scrolls toward older content and PgDown returns to the bottom in detailed mode.
TestUpDownArrowsScrollDetailedTranscript verifies that arrow keys scroll one line at a time and bottom is clamped at offset 0.
* test(tui): ANSI strip verification for markdown rendering controls and selectable text
TestStripMarkdownRenderControlsStripsAllANSI verifies bold markers, color sequences, and combined sequences are stripped.
TestSelectedTranscriptTextStripsANSIFromHighlightedCode verifies that chroma-highlighted code blocks produce clean plain text in the selectable layer.
* fix for coderabit, and better fewer code.
* fix(tui): address PR review feedback dead code, hover clear, and
rebindable key label
* format
* addressing the review issue
1. the ctrl + b in detailed mode, added the guard to not be able to do
it in detailed mode so it affect its state in the normal mode.
2. added a test coverage for keyDown after `keDown then keyUp` so it
covers that.
* fix(tui): close file drill-in when entering detailed transcript
toggleDetailedTranscript now calls exitFileView before returning, so an active file drill-in is automatically closed when the user enters detailed transcript mode.
* test(tui): verify file drill-in closes on detailed toggle
Adds TestDetailedTranscriptClosesFileView and TestDetailedTranscriptStaysClosedOnSecondToggle to guard against the file-view bypass bug.
* fix(tui): block composer hit-test while detailed transcript is active
composerMouseSelectionBlocked and mouseOverComposer now check m.transcriptDetailed so mouse clicks and wheel events in the composer area reach the transcript body instead of being silently consumed.
* test(tui): verify composer mouse is ignored in detailed mode
Adds TestComposerMouseSelectionBlockedInDetailedMode to guard against composer hit-test swallowing mouse events during detailed transcript viewing.
* Add-user-ZERO-guidelines-to-system-prompt
* fix(agent): resolve user ZERO.md under config.UserConfigDir()/zero
Review feedback: every other user-level config (config.json, commands,
specialists) lives under config.UserConfigDir()/zero, so the per-user
guidelines file now resolves there instead of ~/.zero. The basename match
is case-insensitive to mirror the project guideline loader.
Co-Authored-By: Claude Fable 5 <[email protected]>
* refactor(agent): extract shared guideline truncation and lookup helpers
CodeRabbit review feedback: the rune-safe truncation block and the
case-insensitive basename scan were duplicated across the project and
user guideline loaders. Extract truncateGuidelineContent and
findCaseInsensitiveFile and use them in both paths.
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(agent): keep truncated guideline content within the byte limit
CodeRabbit review feedback: truncateGuidelineContent appended the
truncation marker after slicing to the limit, so the result could
exceed the requested budget by the marker length. Reserve space for
the marker before choosing the cut point.
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(agent): fix small-limit truncation, precedence, and test isolation for user guidelines
Address remaining review feedback on PR #475:
- truncateGuidelineContent still exceeded the limit when limit was
smaller than the truncation marker itself. Fall back to a hard,
rune-safe cut with no marker in that case so the result never
exceeds the caller's budget.
- Reorder buildSystemPrompt so user guidelines are injected before
workspace/project guidelines, and add an explicit precedence note
in the user guidelines section text, so a repo's AGENTS.md/ZERO.md
is the later, more specific instruction and wins on conflict.
- Add a TestMain in the agent package that stubs userConfigDirForPrompt
to an empty temp directory by default, so buildSystemPrompt(Options{})
calls in unrelated tests don't pick up a contributor's real
~/.config/zero/ZERO.md.
- Document the per-user ZERO.md location and its precedence relative
to project guidelines in AGENTS.md.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
---------
Co-authored-by: Claude Fable 5 <[email protected]>
* feat: agent quality, caching, retry, and tooling upgrades
Ten self-contained improvements to the core agent engine and tools:
- edit_file: fuzzy fallback matching (7-strategy cascade with uniqueness
protection and a disproportion guard) when old_string does not match
byte-for-byte; exact match remains the fast path
- edit_file/write_file: inline error-severity LSP diagnostics in tool
output so the model sees a break it introduced in the same turn
- lsp: expand server registry from 4 to 28 languages; doctor grades only
tier-1 servers and lists the long tail informationally
- agent: consecutive read-only tool calls execute concurrently (bounded
at 8), consumed in original order, never spanning a mutating call
- anthropic: cache_control breakpoints on the last two conversation
messages so the transcript prefix stays a prompt-cache hit
- providerio: retry schedule raised to 6 attempts with exponential
2s-30s backoff when the server sends no Retry-After
- tools: truncated exec/bash output spills to a redacted temp file
referenced in the truncation notice; bash output (previously
unbounded) now shares exec_command's token budget
- web_fetch: dependency-free HTML-to-markdown conversion (format:
auto|raw|markdown) and larger limits (256KiB default, 2MiB max, 30s)
- modelregistry: live models.dev overlay refreshes context limits and
base pricing from a TTL-cached fetch; opt-in at the CLI entrypoint
- tools: opt-in format-on-write (ZERO_FORMAT_ON_WRITE=1) runs standard
formatters across 27 extensions, ordered before the file-tracker
re-baseline so conflict detection is preserved
* fix: address PR review feedback on fuzzy edits, diagnostics, spill
- edit_file: adapt the replacement to the fuzzy-resolved span — when the
span is a uniformly deeper-indented copy of old_string (line-trimmed /
indentation-flexible matches), the same indentation delta is applied to
new_string, and a span ending in a bare CR keeps its CR so CRLF files
never gain a mixed line ending; block-anchor matches with drifted
interiors are deliberately left untouched
- diagnostics: render workspace-relative paths in inline post-edit
diagnostics (base name outside the workspace) so absolute paths never
leak the local username or directory layout into the model prompt or
session transcript
- spill: harden the spill directory for shared temp dirs — per-uid name,
reject symlinked or non-directory paths (MkdirAll follows symlinks),
and on Unix require current-user ownership
- bash: the branch's output cap and truncation-flag threading are
superseded by main's capture-time bounding (boundedBuffer +
budgetBashCapture), which already sets Result.Truncated; this rebase
adopts that design and keeps spill-to-disk on exec_command, where the
full output is still buffered and a spill is genuinely complete
* fix: address review round 2 — permission-event race, fuzzy ambiguity, spill reachability
- agent: serialize OnPermission behind the same mutex as
OnPermissionRequest in the parallel read batch. buildPermissionEvent
fires for batched reads with a non-trivial sandbox decision (e.g. a
grant-matched extra root), and front-end handlers append to shared
session-recording state without their own locking — two batched reads
emitting concurrently was a data race the pre-batch serial loop never
allowed.
- edit_file: reject two or more DISTINCT candidate spans from one fuzzy
strategy as ambiguous instead of silently editing the first. Duplicate
blocks at different indentation each resolve to a unique literal, so
the previous occurrence-uniqueness check passed and wrote the wrong
span. A single candidate occurring at multiple positions still
cascades to stricter strategies as before.
- tools: make spill files actually reachable by the recovery path the
truncation notice advertises — resolveScopedReadPath now recognizes
files inside the per-uid spill dir (containment verified after symlink
resolution, so a planted link cannot smuggle an out-of-scope file
through the gate); read_file/grep can follow the notice instead of
re-running the command.
* fix: surface competing block-anchor spans; make write-barrier test observe cross-probe order
- edit_file: blockAnchorReplacer now returns every span clearing the
similarity threshold (best first) instead of silently picking the
single most-similar block. Hiding competitors from the cascade's
distinct-candidate check could edit the wrong block when two blocks
share anchors and both interiors are plausible; one clear winner still
resolves, two plausible blocks now report ambiguity (covered by a
two-block test that asserts the file is untouched).
- agent tests: the parallel write-barrier test now records both probes
into one mutex-guarded shared log and asserts the cross-probe ordering
it always claimed to (write starts after the first read batch ends;
second read batch starts after the write ends). The previous version
only compared indices within the read probe's own log, which a
regression letting the write overlap a batch could still pass; the
stray no-op mutex assignment is gone.
* fix(sandbox): fix nested pipe creation under the Windows restricted token
Any subprocess spawned FROM WITHIN a process already running under Zero's
write-restricted token, that captures the child's output via a pipe, failed
with ERROR_ACCESS_DENIED. Reproduces with `gh pr list` (gh shells out to git
and captures its output), with a bare Go program doing exec.Command(...).
Output(), and with cmd.exe's own FOR /F ('...') construct, which uses the
identical CreatePipe+CreateProcess pattern internally with no external tools
involved.
Root cause: a WRITE_RESTRICTED token requires a WRITE-type access check to
match BOTH the normal enabled-SID grant and a separate grant to one of the
token's restricted SIDs. CreateRestrictedToken does not modify the default
DACL it inherits from the base token, so a pipe created with a default
security descriptor (the common case; every language runtime's "spawn a
subprocess and capture output" primitive does this) only carries ACEs for
the base identity, none of which are in the restricted-SID list, so the
second check fails. This is the same failure family already documented for
Schannel/SEC_E_NO_CREDENTIALS, but broader in scope: it affects any pipe,
event, mutex, or other kernel object created with default security by a
process running under the token.
Fix: add the token's own logon SID (already unconditionally present in its
restricted-SID list) to the token's default DACL, so objects it creates
without an explicit security descriptor automatically satisfy the extra
check. This does not touch filesystem access: NTFS write-jailing is
enforced by the explicit ACL grants applied to workspace paths, created
WITH an explicit security descriptor, and the token's default DACL is only
consulted when none is supplied. Exposure is bounded to the same logon
session (only other processes running as the same signed-in user could, in
principle, open a NAMED object the sandboxed process creates with default
security; anonymous pipes have no name and are reachable only via an
inherited handle, so this is a no-op for the actual objects this fixes).
This is not specific to the unelevated tier added in #427 - the affected
token-construction code is shared by both the fully elevated and unelevated
restricted-token paths, so this predates that work.
Verified on Windows 11 (before/after, using an unfixed build for
comparison):
- Before: FOR /F fails with Win32 error 5 (ERROR_ACCESS_DENIED), masked
behind cmd.exe's generic "not recognized" message; `gh pr list` fails
with "failed to run git: pipe: Access is denied."; a bare Go nested
exec.Command(...).Output() fails with "pipe: Access is denied."
- After: all three succeed; `gh pr list` returns real PR data.
- Write-jail regression check: a write outside every granted root is still
denied by the OS after the fix (unchanged from before).
New TestWindowsRestrictedTokenNestedPipeCapture (ZERO_SANDBOX_REAL_SMOKE=1)
pins the FOR /F case using only cmd.exe, no external dependency. go vet and
the full internal/sandbox suite are clean (excluding pre-existing failures
already present identically on unmodified main, unrelated to this change).
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(sandbox): fix dangling-buffer use-after-scope in default DACL merge
Addresses the blocker from review on this PR (Vasanthdev2004, gnanam1990,
coderabbitai): windowsTokenDefaultDacl returned a *windows.ACL that points
INTO the local buf byte slice backing TOKEN_DEFAULT_DACL - Windows embeds
the ACL data in the same allocation GetTokenInformation fills. The
function's own runtime.KeepAlive(buf) only covered buf up to that
function's own return; nothing kept it alive across the caller's later use.
In broadenWindowsRestrictedTokenDefaultDacl, the returned ACL pointer was
then dereferenced by native code in setEntriesInACL after intervening
allocations (the EXPLICIT_ACCESS literal, TrusteeValueFromSID) that are
GC-safepoint-eligible - a real use-after-free window in code that
constructs part of the sandbox's own restricted token, even though Go's
current non-moving GC meant it didn't manifest in testing.
windowsTokenDefaultDacl now returns the backing buffer alongside the ACL;
the caller holds runtime.KeepAlive(oldDaclBuf) until after
SetEntriesInAclW (the last point that dereferences it) returns.
Also from review: SetEntriesInAclW reports its Win32 error directly in the
return value, not via GetLastError, so setEntriesInACL now uses that
return value directly instead of the (potentially stale/unrelated) syscall
error. And narrowed the default-DACL grant from GENERIC_ALL to GENERIC_READ
| GENERIC_WRITE - the second WRITE_RESTRICTED access check only needs a
read/write match; GENERIC_ALL also implied DELETE/WRITE_DAC/WRITE_OWNER
that the pipe/event/mutex use case never needed.
Re-verified on Windows 11 with the fixed runner: nested pipe capture still
succeeds (pure Go exec.Command(...).Output(), and TestWindowsRestrictedTokenNestedPipeCapture
via go test itself), and the write-jail regression check (write denied
outside every granted root, allowed inside) is unchanged. Full
internal/sandbox suite green.
Co-Authored-By: Claude Fable 5 <[email protected]>
---------
Co-authored-by: Claude Fable 5 <[email protected]>
* feat(tui): actionable hints on provider/model errors
Classify a failed turn's provider error into auth / rate-limit /
connectivity / model-not-found / context-overflow and render a one-line
next step below the red error row, instead of dumping an identical raw
blob for every failure mode.
The classifier lives in a new internal/errhint package so both the TUI
error row and the CLI exec path can share it (TUIHint references slash
commands, CLIHint references zero subcommands). Classification is a
conservative string heuristic keyed off providerio.ClassifiedError's
prefixes plus lower-level DNS/TLS/timeout/context-length signatures,
since the numeric HTTP status is gone by the time the error reaches a UI
surface.
* feat(tools): budget bash output with head+tail truncation
bash was the one tool that returned command output with no byte cap —
'cat large.log' or a verbose test run could dump megabytes into context
and force compaction, while every other read/search tool already applies
a budget.
Cap stdout and stderr at 96KB each, keeping the head and tail of an
oversized stream (build/test failures usually land at the tail) and
dropping the middle behind a marker that points at redirect-to-file +
read_file. Record raw_bytes/emitted_bytes/estimated_tokens/truncated in
Meta like the other tools. Sandbox-denial and shell-issue detection still
run on the full raw output before budgeting.
* fix(gemini): retry 401 with refreshed OAuth token
The Gemini provider used providerio.SendWithRetry (429/503/529 only),
so an expired OAuth token surfaced as a terminal 'API key not valid'
auth error while OpenAI and Anthropic silently recovered via
SendWithAuthRetry's force-refresh-and-replay on 401.
Plumb OAuthResolver through gemini.Options/Provider and the factory
(exactly as the other two providers already do) and switch the stream
send to SendWithAuthRetry. With a nil resolver (API-key users) behavior
is unchanged.
* fix(errhint): gate classification on provider-origin marker
Address CodeRabbit review on #1: agentResponseMsg.err can also carry
local failures (a tool's 'permission denied', a 'file does not exist',
a config error), and broad substrings would have attached a bogus
/provider or /model hint to those.
Classify now returns Unknown unless the message carries a provider marker
the provider layer always attaches (auth error: / rate limit error: /
provider error: / provider request error: / provider stream error:).
Local errors never draw a provider hint; provider errors sub-classify as
before. Added local-failure test cases proving they stay Unknown.
* feat(cli): actionable hint on text-mode exec provider errors
zero exec printed provider failures as a bare '[zero] <raw error>' with
no next step. Append a one-line hint (reusing the shared errhint
classifier) for recognized provider failures — 'run `zero auth`',
'run `zero doctor`', etc. The provider-origin gate means non-provider
codes (sandbox_error, mcp_error) and JSON/stream-json output are
untouched.
* fix(tools): set Result.Truncated for budgeted bash output
Address CodeRabbit review on #3: budgetBashOutput recorded truncation in
meta["truncated"] but never set the Result.Truncated struct field, so
consumers reading the struct (like glob/web_fetch/read_minified do) would
miss truncated bash results. Return the bool from budgetBashOutput and
set Result.Truncated on every return path.
* perf(tui): reuse one LSP manager across prompts
runAgentWithOptions built a fresh lsp.NewManager per run and shut it down
when the run returned, so gopls (and every other language server)
cold-started on the first edit of every turn — 200ms-2s of latency the
manager's own design (long-lived, reused servers) exists to avoid.
Build one manager per session in newModel (cheap: servers start lazily on
first Check) and reuse it across runs; the SelfCorrector still gets a
fresh checker wrapping the shared manager each run. Torn down with a
short deadline in quit(). Runs fall back to a per-run manager when the
session manager is absent (cwd unknown, or a directly-built test model).
* perf(tui): accumulate streamingText as []byte (O(1) append)
m.streamingText += msg.delta was O(len) per delta -> O(n²) across a long
generation (a 10k-token code gen allocates hundreds of MB of intermediate
strings and the UI gets progressively laggier). Accumulate into a []byte
with append (O(1) amortized) and read via streamingTextString().
A []byte rather than strings.Builder because the TUI model is copied by
value on every Update, which would trip strings.Builder's copy check;
[]byte is nil-safe and copies cleanly like the other slice fields.
* perf(tui): coalesce streamed text deltas to one frame
Every OnText delta was its own tea.Msg, so a fast provider (100+ tok/s)
drove 100+ full Update->View cycles per second, each re-parsing the
growing markdown — visible stutter over SSH and wasted CPU.
Batch agentTextMsg deltas at the runtime sink over a ~16ms frame and
forward them as a single message, decoupling render rate from token rate.
Any non-text message flushes pending text first so ordering with
tool-call / reasoning / row messages is preserved; the final
agentResponseMsg (a tea.Cmd return, not a sink message) is safe because
the model already drops deltas for an inactive runID.
* fix(agent): raise tool-failure stop threshold 4->6
guardrails.go halted a run after 4 consecutive same-error tool failures.
A corrective hint fires at 2, and a model iterating on a genuinely tricky
edit can legitimately fail a couple more times after the hint while
converging — stopping at 4 cut those runs short. Raise to 6; the streak
still resets the instant the tool succeeds or hits a different error, so
only true same-error loops are affected.
* fix(agent): more reconnect retries with jitter; narrow to transport errors
#19: bump maxStreamReconnects 2->4 and add up-to-50% jitter on the
exponential backoff (capped at 8s), so a multi-second network blip is
ridden out instead of killing the run on a 2s hiccup, and concurrent runs
(swarms, cron fleets) don't reconnect in lockstep.
#34: drop the '502'/'503' substring matches from shouldReconnect. 503
already exhausted providerio.SendWithRetry (retrying here is a redundant
double-retry) and 502 is non-idempotent by providerio's rule (the POST
may have been processed). Only genuine transport failures — where no
response was received — reconnect now.
* fix(agent): reduce stall retries 2->1 to bound stuck-session time
A no-output stream stall is detected only after the full stream idle
timeout (~5min) elapses, and each retry can idle again — so 2 retries
left an interactive session frozen for ~15min. Drop to 1 retry: keeps the
common single-hiccup recovery while bounding the worst case to ~2x the
idle timeout.
* fix(tui): serialize coalescer forwarding to preserve message order
Address CodeRabbit review on #7: flush() and the run-switch path drained
the text buffer under c.mu but called forward() after releasing it, so a
timer-fired text flush could race a concurrent non-text send() and land
after the tool-call/reasoning message it should precede.
Hold c.mu across drain AND forward (drainAndForwardLocked), so whoever
holds the lock delivers atomically and the other caller blocks until it
is done — text can never overtake a following non-text message. Added a
concurrency stress test (timer racing an inline send) that passes under
-race.
* feat(tui): accept /compact now
Bare /compact already triggers compaction, but /compact now — what users
reach for when the context gauge climbs — hit the usage-error branch.
Accept the 'now' keyword and advertise it in the command usage.
* feat(tui): add /retry, /edit, /copy, /export commands
/retry resends the last prompt; /edit recalls it into the composer to
tweak and resend — both read a new lastPrompt field captured verbatim
(pre-expansion) in launchPrompt. /copy puts the last answer on the
clipboard via the existing copy machinery; /export writes a plain
role-prefixed transcript to a file (timestamped default, or a given
path). Real gaps for SSH users with no mouse select.
* feat(tools): separator-insensitive tool_search matching
tool_search ranked deferred tools by exact substring, so a model that
typed 'webfetch' (dropping the underscore) matched nothing and looped.
Add a separator-squashing fallback ('web_fetch' -> 'webfetch') scored
below an exact substring match, so precise queries still rank first.
* feat(tools): signal ask_user dismissal distinctly from a blank field
Empty answers all rendered as '(no answer provided)', so the model
couldn't tell a wholesale dismissal (user closed the prompt without
answering anything) from one field left blank amid real answers — and
might invent a default. FormatAskUserAnswers now flags a full dismissal
up front as a skip and marks individual empties '(left blank)' vs
'(skipped)'.
* feat(tui): fuzzy ranking in model/session pickers
The pickers filtered by flat strings.Contains with no ranking, so
finding 'sonnet 4.5' among 50+ models meant an exact prefix or scrolling.
Rank matches (exact < prefix < contains < subsequence, reusing
fuzzySubsequenceGap) so the closest match lands on top, and 'snt45' now
matches 'Sonnet 4.5'. Groups stay contiguous — ordered by their best
match, never split — so the grouped model picker still renders one header
per provider. Covers both /model and /resume (shared commandPicker).
* perf(agent): cache per-tool schema render across turns
partitionTools re-ran the recursive schema->map conversion
(schemaToRuntimeMap) for every tool on every turn — redundant, since a
tool's advertised name/description/schema is stable for the run. Add a
per-run definition cache keyed by tool name (nil-safe; the plain
partitionTools entrypoint and tests pass nil for fresh renders).
The partitioning itself (visibility, deferral, ordering) still recomputes
every turn — it must, because a tool's deferred state can flip mid-run
(swarm tools un-defer once a swarm is active). Only the expensive schema
render is memoized. tool_search is excluded by its callers (dynamic
description) so it never poisons the cache.
* perf(agent): calibrate compaction estimate against real prompt tokens
The byte/4 heuristic (ApproxTextTokens) over-counts code-heavy content
~15-20%, so with triggerRatio=0.7 compaction fired at ~60% of true
capacity — premature summarizer calls that degrade quality. Each turn now
folds (rawEstimate, provider InputTokens) into an EMA calibration ratio,
clamped per-sample to a sane band; maybeCompact and the reactive path
scale their estimates by it. Turn 1 uses the raw estimate (no data yet);
later turns compact near real capacity.
* style: gofmt the new agent test files
The CI gofmt check flagged the #22/#25 test files (struct-field and
switch alignment). No behavior change.
* feat(agent): turn-based plan staleness reminder
The stale-plan nudge only fired after 10 tool calls since the last
update_plan, so a plan that drifts stale across many low-tool-call turns
(one call per turn) took many turns to catch — the 'plan set turn 1 stays
pending forever' case. Add a turn-count complement: after
stalePlanTurnThreshold (8) turns without an update AND with items still
pending, fire the same one-shot reminder. Gated on pending items so a
fully-completed plan is never nagged; the existing tool-call trigger is
unchanged. (The roadmap's fuzzy 'tool calls unrelated to plan items'
relevance match is deliberately omitted — too false-positive-prone.)
* feat(agent): preserve recent-edits summary across compaction
Compaction preserved the plan, loaded skills, tool schemas, and project
instructions, but not file edits — so after the editing turns were elided
the model knew it had changed a file only vaguely, and would re-read to
rediscover its own footprint. Extract write_file/edit_file targets from
the elided middle with a one-line note from each tool result, merge them
across repeated compactions (newer note per path wins), and carry them in
the preserved-state JSON (capped at 20 paths / 160 bytes per note).
* feat(tui): workspace-scoped /resume + fewer event reads
/resume listed sessions from every project globally, and read the full
event file for each of them to test for resumable content. Filter the
picker (and /resume latest) by the current workspace Cwd, checked BEFORE
the per-session read so a large global history no longer pays N full file
reads to build one workspace's list; also skip zero-event sessions via
metadata without any read. Sessions with no recorded Cwd (older runs) and
an unknown current workspace stay visible so nothing is hidden that can't
be confidently placed. Explicit /resume <id> still resolves any session.
* feat(tui): warn on model switch that drops staged images
Staged images were silently dropped at submit when the active model had
no vision support — the user only learned after sending. Chips already
render above the composer (renderAttachmentChips); add an immediate amber
warning line to the /model switch status (both same-provider and
cross-provider paths) when images are staged and the newly selected model
can't accept them, so the drop is surfaced at switch time.
* feat(tui): inline recovery affordance on setup errors
A first-run setup error rendered as a bare red 'error: <text>' with no
pointer to the fix. Append a faint, stage-tailored recovery line (edit
the endpoint/name/key above then Enter, or pick another model) that names
only keys the stage's footer confirms, so the guidance is always accurate.
Empty for stages whose footer already makes recovery obvious.
* fix: address CodeRabbit review (5 findings)
- loop.go: recompute the compaction calibration estimate at calibration
time, not request-build time, so a reactive-compaction reissue that
shrinks the request feeds the EMA the sample that actually completed.
- errhint: match bare HTTP status codes (401/403/429/529) only at digit
boundaries, so an incidental number ('4290ms', 'id 14015') isn't
mis-bucketed as auth/rate-limit.
- bash: drop the stray unmatched ']' in the output-truncation marker.
- tui /retry: apply the same exiting/compactInFlight guards commandPrompt
has, so a retry can't race compactResultMsg's rewrite of session state.
- tui /export: write the transcript 0o600 (it may contain echoed
secrets), not world/group-readable 0o644.
* test(tui): skip export file-mode assertion on Windows
os.WriteFile ignores Unix permission bits on Windows and Stat reports
0666, so the 0o600 assertion failed there. The production 0o600 is
honored on Linux/macOS (where it matters); guard the check with
runtime.GOOS so Windows smoke passes.
* fix(tui): align /resume latest filters + case-insensitive workspace match on Windows
Address CodeRabbit review on #21:
- latestResumableInWorkspace now applies the SAME filters as the picker
(skip zero-event metadata and empty/failed runs), so /resume latest
can't land on a session the picker intentionally hides.
- sessionMatchesWorkspace compares paths case-insensitively on Windows
(its filesystem is), so the same workspace spelled with different casing
no longer hides resumable sessions; other platforms stay case-sensitive.
* fix(tui): /retry resends the last prompt's image/PDF attachments
/retry relaunched only lastPrompt's text, but launchPrompt clears the
pending image/document queues once a turn is sent. A vision- or PDF-backed
prompt that failed would silently retry as text-only and answer a different
task. Snapshot the consumed attachments at launch and re-stage them on
/retry so launchPrompt rebuilds an identical request (document preamble,
images, and the submit-time vision re-check). startNewSession drops the
snapshot so a post-/new /retry cannot leak the previous session's
attachments. Also correct the OAuthResolver factory comment, which omitted
the Gemini provider it is now passed to.
* fix: address jatmn review (reconnect 5xx, /edit attachments, edit-cap, coalescer test)
- reconnect: exclude HTTP 5xx (500/502/503/504) before the transport
substring match so "504 Gateway Timeout" no longer slips through on the
generic "timeout" needle. A gateway timeout is non-idempotent — the
completion POST may already have reached the model — so replaying the
connect risked duplicate billable work. Reuses a digit-boundary status
matcher exported from errhint (HasStatusCode). Test asserts 504/500 stay
non-reconnectable.
- tui /edit: re-stage the remembered image/PDF snapshot alongside the
recalled prompt text, mirroring the /retry fix — editing a vision- or
document-backed prompt no longer silently resends a text-only version.
- compaction recent-edits: order edits by LAST edit, not first, and move a
re-touched path to the newest position on merge, so the maxRecentEdits
tail cap keeps the file the model most recently edited instead of dropping
it. Adds mergeRecentEdits (edit-specific) and a capped-list regression.
- coalescer test: inject the frame timer via afterFunc so
TestCoalescerBatchesDeltas proves buffering deterministically instead of
racing the real 16ms wall-clock timer.
* fix(tools): bound bash output capture in memory, not just model-visible text
Previously stdout/stderr streamed into unbounded bytes.Buffers and were only
truncated to the 96 KiB budget AFTER the command finished, so a runaway command
(cat huge.log, yes) could grow Zero's memory until it stalled or OOMed before
budgetBashOutput ever ran. Replace the capture with boundedBuffer, an io.Writer
that keeps only the head+tail each stream will surface and discards the middle as
it arrives, while counting the true total for the truncation marker. Memory is now
bounded to ~head+2×tail per stream regardless of output size.
truncateHeadTail is refactored onto a total-aware core so the string path (and its
tests) are unchanged, and budgetBashCapture reports the true raw_bytes even though
only a bounded slice was held. Adds boundedBuffer/capture unit tests and an
end-to-end test that streams ~5× the budget and asserts bounded emission with an
accurate raw_bytes.
Setting ANTHROPIC_BASE_URL to a proxy/gateway failed setup with "anthropic
provider anthropic requires official baseURL https://api.anthropic.com".
OPENAI_BASE_URL already auto-promotes a non-official env URL to the
openai-compatible kind, but Anthropic had no equivalent, so the universal
ANTHROPIC_BASE_URL proxy convention was rejected outright.
Mirror the OpenAI behaviour: a non-official ANTHROPIC_BASE_URL from the
environment promotes the profile to anthropic-compatible. This stays env-only
on purpose -- a custom baseURL in a project config.json is still rejected by
Resolve, so an untrusted project can't redirect a first-party key to another
host (TestResolveRejectsAnthropicOfficialProviderCustomBaseURL still passes).
Fixes#479
* fix(specialist): cap max specialist nesting depth
A Task specialist can recursively spawn further specialists via --depth.
Without a ceiling, a runaway or malicious chain of Task calls can recurse
indefinitely, exhausting process and memory resources. Reject any run whose
depth exceeds a hard cap of 8.
Related to #470, not closing it: today's normal specialist/swarm path
cannot reach this recursively, since child sessions are launched with
--tag specialist and shouldRegisterExecSpecialistTools suppresses the Task
tool for that tag (see PR description for details). This is a
defense-in-depth guard, not a fix for an active exploit. Split out of #468
at reviewer request.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(specialist): reject depth cap at the boundary, not past it
Addresses jatmn's review on PR #491:
- Executor.Run checked `CurrentDepth > maxSpecialistDepth`, but this call is
what launches the child at CurrentDepth+1. A parent already AT the cap
passed the check and started a child one level past it, only getting
rejected on that child's own next call. Change to `>=` so the guard fires
before the over-cap child is launched.
- Add TestRunRejectsDepthAtMax to cover the boundary explicitly.
* test(specialist): cover resume boundary in depth-cap guard
The pre-branch depth guard in Run sits before the fresh/resume split, but
the boundary test only exercised the fresh path, leaving a future refactor
free to move the guard without any test catching a resume regression.
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
* fix(tools): fix cmd.exe /S/C corrupting commands with embedded quotes
Any shell command whose own text contains embedded double quotes -
python -c "print(15 / 3)", git commit -m "message", node -e "..." - was
silently corrupted on Windows before reaching the target program. Reported
live: a model ran python -c "print(15 / 3)" and got back a SyntaxError
showing the code Python received as literally "print(15, truncated right
before the /.
Root cause: bash.go passes the full command text as ONE argv element to
cmd.exe /d /s /c, and Go's os/exec escapes it correctly for a standard
CommandLineToArgvW-style parser (wrapping it in quotes, backslash-escaping
the embedded ones). But cmd.exe's own /C remainder parsing does not follow
those rules once /S is present: per its documented behavior, it strips the
FIRST and LAST literal quote character in the whole remainder - not a
matched pair - before handing the (now corrupted) text along to be
re-tokenized. The escaping was correct for one layer of parsing; the
command line actually goes through two.
Fix: on Windows, write commandText to a temp .cmd script file and point
/c at the file's path instead of the raw command text. This sidesteps
cmd.exe's /C-remainder heuristic entirely, since the remainder is then
just a plain path with no quotes to mis-strip. @echo off is prepended
since cmd.exe treats a /c target ending in .cmd as a batch file and
echoes each line it runs by default, which would otherwise pollute
captured stdout (caught by the existing bash tool test suite before this
commit, not left in).
buildBashCommand now returns a cleanup func (in addition to plan.Cleanup)
for the temp file. Both callers updated: bash.go's one-shot run defers it
immediately; exec_command.go's persistent session composes it with
startExecProcess's own cleanup and runs it after the session's process
actually exits, not before.
This fix lives upstream of the sandbox wrapping, in how the Name/Args spec
is constructed before either the direct or sandboxed code path consumes
it, so both benefit without separate sandbox-specific changes - cmd.exe's
own command-line parsing does not depend on what token launched it.
New TestBashToolPreservesEmbeddedQuotesOnWindows pins the exact failure
shape via a self-dispatch test helper (a quoted argument containing a
space and a slash, matching the original bug report's truncation point),
with no dependency on python being installed. Full internal/tools suite
green, excluding 3 failures pre-existing and identical on unmodified main
in my environment (unrelated path-assumption issues under a deeply nested
working directory).
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(tools): pass the shell command line to cmd.exe raw instead of via a temp script
Review on the original fix found real problems with running commandText
from a temporary .cmd file: it silently changed cmd.exe command-line
syntax into batch-file syntax (for example, for %i loops need %%i only
inside an actual .bat/.cmd file), /s was still corrupting the script
path itself if it contained spaces, and the script leaked on sandbox
planning errors.
The actual root cause was narrower than the temp-file approach assumed.
cmd.exe's own /C remainder parsing is not CommandLineToArgvW-compatible:
it strips the first and last literal quote from the remainder whenever
it starts with a quote, without undoing backslash-escaping. Passing
commandText as a normal exec.Cmd argument makes Go wrap it in exactly
that shape (quoted because it has spaces, inner quotes escaped as \")
since it contains embedded quotes, which is what the stripping then
corrupts.
Fixes it at the source instead: commandText now reaches cmd.exe
completely unescaped (via SysProcAttr.CmdLine for the unwrapped path,
and the same treatment inside the sandboxed runner's own process
creation for the wrapped path), exactly as if it had been typed at an
interactive prompt. No outer quotes means the stripping heuristic never
triggers for a command like `python -c "print(15 / 3)"`, and a command
that legitimately starts with a quoted executable path is handled by
cmd.exe's own careful quote-preserving special case for that shape.
Also drops /s, which forced the more aggressive of cmd.exe's two
stripping behaviors. No temp file, so nothing to leak on error, and no
batch-file reinterpretation of the command text.
internal/sandbox/windows_runner.go now owns the shared shell-argv shape
(WindowsShellArgs/WindowsShellCommandLine) so internal/tools/bash.go
and the sandboxed runner's windowsCommandLine build the exact same raw
command line instead of duplicating the flag literals in two places.
* chore: retrigger CI
The Windows smoke job failed on TestLoadOrCreateSecretConcurrentConverges in internal/oauth (a lock-file access-denied flake), unrelated to this change. internal/tools and internal/sandbox, the packages this PR touches, both passed. Retriggering to confirm.
---------
Co-authored-by: Claude Fable 5 <[email protected]>
* fix(tools): make grep and glob respect run cancellation
grep and glob's Run/RunWithSandbox discarded their context parameter
entirely (bound to _) and ran a synchronous filepath.WalkDir with no way
to know it should stop. An unscoped search over a large tree - a broad
parent directory, not just the workspace, which the model can and does
reach for - could run long enough to be effectively unkillable: the TUI's
Ctrl+C/exit path calls the stored CancelFunc and immediately marks the run
"cancelled" in the UI, but the underlying walk kept running regardless,
because nothing in it ever checked ctx.Err(). Worse, the TUI's quit path
explicitly waits for the cancelled run's own response (to drain
flushRunIDs, so /rewind checkpoints stay consistent) before it will
actually exit - so with the walk unable to hear the cancellation, neither
a second Ctrl+C nor /exit could complete. The only way out was killing the
process.
Thread ctx through Run/RunWithSandbox into grepFiles/scanGlob and check
ctx.Err() at the top of each WalkDir callback, ahead of walkErr, so a
cancelled run aborts the walk on its very next entry instead of visiting
every remaining file. Checked the rest of the tools package for the same
_ context.Context pattern: list_directory (single-level os.ReadDir, no
walk), skill, ask_user, and update_plan don't touch the filesystem, so
grep and glob were the only two tools with this gap.
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(tools): thread cancellation through grep's match-collection phase
The walk-level fix in grepFiles stopped a cancelled search from visiting
new filesystem entries, but collectGrepMatches still read and
regex-scanned every file the walk had already found, so a search that
had discovered its full file list before cancellation kept running
regardless. Adds the same per-item ctx.Err() check to that phase, plus
a deterministic test that cancels after a fixed number of files instead
of relying on timing.
* test(tools): add mid-walk cancellation coverage and shared helper
Add deterministic mid-walk tests for grepFiles and scanGlob using countingCancelContext, and extract searchCancelledResult so grep/glob share the same cancellation Result mapping.
* style(tools): gofmt search_cancel.go (add missing trailing newline)
Co-Authored-By: Claude Fable 5 <[email protected]>
---------
Co-authored-by: Claude Fable 5 <[email protected]>
* polish: cut per-turn overhead, stabilize cache, add /new
Context economy
- Compaction: preserveLast 8->6, triggerRatio 0.8->0.7 (both copies in sync).
- System prompt: kill the "ELABORATE summary" directive; scale summary to
the work. Comment discipline moved into the core prompt for all model
families (was Anthropic-only); Minimax/DeepSeek/Qwen/etc. now get it.
- Token-budget regression test ratchets the fixed per-turn overhead (base
prompt + eager tool schemas) using the runtime's own estimator, so silent
prompt/schema growth fails CI.
Response quality
- defaultResponseStyle balanced->concise. Reversible via /style.
Tool discovery
- <available_skills> block in the system prompt lists installed skills
(name + one-line description) so the model loads the right one on the
first call instead of guessing and reading the failure. Budget-capped at
640 bytes with an "...and N more" fallback; renders nothing when no
skills are installed (byte-identical to prior prompt).
Session lifecycle
- /new starts a fresh session in place; previous session stays on disk and
is named in the confirmation for /resume. Guards against mid-run reset.
- /clear now notes that context persists and points to /new.
Performance & caching
- partitionTools no longer alpha-sorts the whole tools array every turn,
which inserted a loaded deferred tool mid-array and shifted the cached
prefix on every load. It now builds append-only regions
[eager sorted] + [tool_search] + [loaded deferred sorted] so a
mid-session load grows the tail instead of busting the eager prefix.
Regression test asserts the eager block precedes any loaded tool.
- /context now shows cache hit rate (flags low rate over >5 turns as a
possible unstable prefix) and rolling average turn latency with
time-to-first-token. Both reset on /new.
Measured baselines (auto-mode, no workspace): base prompt 3162 tokens,
eager tool schemas 2433 across 12 tools. Budget ceilings set ~10% above.
Deliberately deferred (need a decision): inverted safety-policy rewrite
(sandbox doesn't catch ~half the B-tier rules), core-tool/web_fetch
deferral (activation-semantics blocker), aggressive prompt slim.
* fix(tui): clear staged attachments + queued message on /new
CodeRabbit: startNewSession reset conversation/usage/latency state but not
the staged input (pendingImages, pendingImageLabels, pendingDocuments,
queuedMessage), which is only consumed at prompt-submit. Without clearing it,
the fresh session's first prompt silently inherited the previous session's
images/documents/queued text. Test now stages all four and asserts they clear.
* feat(tui): add search/filter to provider picker in setup wizard
Add a search input to the provider step of the setup wizard, matching
the existing model picker search UX. Typing filters the provider list
in real-time via case-insensitive substring matching on name, ID, and
aliases.
Fixes#392
* fix(tui): resolve provider index before clearing search on advance
Clearing providerSearch before using currentProvider() caused the wrong
provider to be selected — selectedProvider is an index into the filtered
slice, and clearing the search swaps to the full unfiltered list.
Also update placeholder to reflect that search matches ID and aliases.
* fix(tui): guard empty-filter Enter and add provider search tests
- Enter on an empty provider filter is now a no-op instead of advancing
with the wrong provider (first full-list entry)
- Add table tests for filteredProviders/name/ID/alias matching
- Add tests for selectedProvider reset on edit, empty-match noop,
Ctrl+U clear restores full list, and filtered advance selection
Addresses review feedback from @Vasanthdev2004 and @gnanam1990 on PR #400
* feat(update): add zero upgrade command to apply self-updates
Extends the existing `zero update --check` (which only reported an
available release) with an actual install step:
- `zero update --apply` / `zero upgrade` download, sha256-verify, and
install the latest release.
- npm installs delegate to `npm install -g @gitlawb/zero@latest`.
- Standalone installs download the release archive, verify its
checksum, extract it (zip-slip guarded), and atomically replace the
running binary plus any pre-existing optional sandbox helpers. On
Windows, the running exe is renamed aside (NTFS allows this even
while it's executing) since it can't be overwritten directly; the
leftover ".old" file is cleaned up on a later invocation.
Closes#459.
* fix(update): correct macOS expectations in apply test
The optional-helper assertion in TestApplyStandaloneUpdateReplacesBinary
assumed every non-Windows platform has a linux-style "zero-seccomp"
helper to refresh, but applyStandaloneUpdate correctly ships no optional
helpers on macOS (matching scripts/postinstall.mjs). This made the test
fail on macOS CI. Only assert the helper refresh on linux/windows.
* fix(update): address CodeRabbit review findings on zero upgrade
- Reject --target when combined with --apply/upgrade: applying installs
onto the current machine, so a mismatched --target could replace the
running binary with an incompatible-arch build.
- Bound archive/checksum downloads with a dedicated timeout separate
from the release-metadata check timeout, so a stalled connection
can't hang zero upgrade forever.
- Surface a failed rollback in the Windows replaceBinary path instead
of swallowing it, so a botched install is reported rather than
silently leaving the binary missing.
- Run CleanupStaleBinary regardless of whether an update is available,
so a leftover Windows ".old" file isn't stuck waiting for a future
upgrade that may never come.
- Report optional sandbox-helper refresh failures as warnings on
ApplyResult (surfaced in text and JSON output) instead of discarding
them silently.
* fix(oauth): retry secret-lock on Windows delete-pending race to unblock CI
TestLoadOrCreateSecretConcurrentConverges was failing this PR's Windows
smoke job with "create token secret lock: ...Access is denied." — a
pre-existing flake in internal/oauth, not in the upgrade code. On Windows
a concurrent holder's os.Remove leaves the .lock in a delete-pending
state, so an O_EXCL create races it with ERROR_ACCESS_DENIED
(os.ErrPermission) rather than ErrExist; createSecretFile only treated
ErrExist as contention and hard-failed otherwise.
Treat os.ErrPermission as retryable too, mirroring acquireFileLock in
lock.go. This is the same root-cause fix as #445 (diagnosis by
@gnanam1990); folded in here to make this PR's CI green. Verified on
Windows: the concurrent-converge test passes 30/30.
---------
Co-authored-by: Vasanthdev2004 <[email protected]>
* fix(agent): reject a malformed additional_permissions payload before prompting
A shell tool call that sets sandbox_permissions: with_additional_permissions
but omits (or malforms) the additional_permissions payload was accepted into
the normal permission-prompt flow. buildPermissionEvent silently swallowed
the validation error while rendering the prompt's scope text, so the user
saw an ordinary-looking request, approved it, and only then hit a hard
denial from the same validation running again at grant time (loop.go's
grantInlineAdditionalPermissions), with the confusing message "failed to
grant session additional permissions: missing additional_permissions".
A malformed payload can never succeed regardless of the user's decision, so
run the same check (inlineAdditionalPermissionsProfile, already the single
source of truth for this shape) up front, before any prompt, and return a
plain tool error the driving model can see and retry from. This also covers
the mismatched case (additional_permissions present without the flag).
Co-Authored-By: Claude Fable 5 <[email protected]>
* fix(agent): make the additional_permissions rejection message actionable
The rejection added in the previous commit correctly stops a malformed
sandbox_permissions: with_additional_permissions call before any prompt,
but its message ("missing additional_permissions; provide at least one of
network or file_system") gave a model nothing concrete to correct itself
with. Observed in practice: a weaker tool-calling model (xai/grok-build-0.1)
kept re-attaching sandbox_permissions out of habit from an earlier, correct
gh/git call onto later commands that didn't need it (network was already
open via a session-scoped grant), hit this same rejection 4 times in a row
with no change in its retry, and gave up.
Both messages (missing payload, and empty-but-present payload) now include
a concrete, schema-accurate example - {"network": {"enabled": true}} or
{"file_system": {"write": ["/path"]}} - and the missing-payload message
adds the other half of the fix: if the command doesn't actually need
elevated permissions, omit sandbox_permissions entirely and retry.
Co-Authored-By: Claude Fable 5 <[email protected]>
---------
Co-authored-by: Claude Fable 5 <[email protected]>
The Bun instructions told global installers to run the postinstall script
manually against the global install path, because trustedDependencies only
works in a project package.json. Current Bun has a simpler sanctioned path
that works for both project and global installs: `bun pm trust
@gitlawb/zero` (with -g for globals) runs the blocked postinstall after the
fact. Verified on Bun 1.3.14 on Windows 11: `bun pm -g trust @gitlawb/zero`
fetched the binary and `zero --version` runs.
Lead with that in README.md, README_ZH.md, and docs/INSTALL.md, keep
trustedDependencies and the manual installer as alternatives for project
installs and older Bun versions, and teach the wrapper's missing-binary
message the same commands for the Bun case.
Co-authored-by: Claude Fable 5 <[email protected]>
createSecretFile's secret-lock loop only retried on os.ErrExist. On Windows a
concurrent holder's `defer os.Remove(lockPath)` leaves the lock file in a
"delete pending" state, so a racer's O_EXCL create returns ERROR_ACCESS_DENIED
(os.ErrPermission) rather than ErrExist — which fell through to a hard
"create token secret lock: Access is denied" error instead of retrying. Mirrors
the identical handling already present in acquireFileLock (lock.go, from #261).
Fixes the flaky Windows-CI failure TestLoadOrCreateSecretConcurrentConverges
that was intermittently red-flagging every PR's Windows smoke job.
Verified on macOS: build/vet/gofmt clean, oauth package green, concurrent-
converge test passes under -race (5x). The Windows delete-pending path can't be
reproduced off Windows, so the definitive proof is the Windows CI on this PR.
* fix: allow non-TLS connections to private-network provider endpoints
The provider wizard and health probe rejected `http://` endpoints with a
non-loopback host, so users could not configure a local-network provider
like llama.cpp on another LAN machine (e.g. `http://192.168.1.100:8080/v1`).
Only loopback was relaxed.
Expand the "loopback-only" checks to also cover private-network addresses
(192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12) via `netip.Addr.IsPrivate()`:
- `providerhealth.endpointIsLoopback` → `endpointIsLoopbackOrPrivate`
(also returns true for private IP literals).
- `providerhealth.allowLoopback` → `allowLoopbackOrPrivate` — the flag
now relaxes both loopback and private addresses in `validateEndpoint`
and `safeDialContext`.
- `providerWizardIsLoopbackHost` in the TUI wizard now accepts private
IPs, so `http://192.168.x.y` passes the endpoint URL validation.
- `providerProfileIsLocal` in headless setup recognizes private-network
IPs as local (skip API key for keyless LAN providers).
- `baseURLIsLoopback` in app.go recognizes private-network IPs for
credential-requirement logic.
Link-local (169.254.x.x), cloud metadata, and other special ranges
remain blocked. Redirects to any local/private address remain blocked
regardless of the flag (SSRF protection for 3xx targets is unchanged).
Fixes#431
* chore: fix gofmt indentation in connectivity client test
* fix(auth): route `zero auth login chatgpt` to the dedicated ChatGPT flow
`zero auth login chatgpt` went through the generic OAuth manager loopback
path, which builds a random-port http://127.0.0.1:<port>/callback
redirect_uri with no extra authorize params. OpenAI's ChatGPT client
registration requires exactly http://localhost:1455/auth/callback plus the
id_token_add_organizations, codex_cli_simplified_flow, and originator
params, so the authorize endpoint rejected the request with an
"Authentication Error" before any browser interaction.
Route the chatgpt provider to the existing dedicated ChatGPT login
(provideroauth.ChatGPTLogin), which already binds the fixed port, uses the
localhost host, the /auth/callback path, and sends the required params.
`zero auth login chatgpt` now behaves identically to `zero auth chatgpt`.
--device is rejected with a clear message since ChatGPT has no device-code
path.
Fixes#430
* fix(auth): reject --scope on ChatGPT login instead of silently dropping it
`zero auth login chatgpt --scope <x>` reached the dedicated ChatGPT flow,
which ignores the generic manager's ExtraScopes — the scopes were silently
dropped while --device was explicitly rejected. Reject --scope up front
with a clear message, since the Codex client registration pins a fixed
scope set (incl. api.connectors.*) that custom scopes would risk dropping.
Addresses CodeRabbit review on #443.
normalizeProfileForProvider rewrote profile.Name to the catalog provider.ID
whenever normalizeIdentity was true — which includes any first-party provider
whose saved baseURL matches the catalog default. The credential store is keyed
by profile.Name, and this rewrite runs before profileWithCredential, so the
stored-key lookup missed and the rebuilt provider went out with no key: a 401 on
every /model switch for a profile named differently from its catalog id (e.g.
"my-openai").
Only canonicalize an empty or generic placeholder name now; a real user-provided
name is preserved. CatalogID canonicalization is unchanged (it is not the store
key). Adds regression tests covering a custom-named first-party profile surviving
normalization and placeholder names still canonicalizing.
Fixes#440
* fix(sandbox): gate /tmp test assertions on GOOS, not path existence
TestPermissionProfileFromPolicyIncludesDefaultTempWriteRoots and
TestNewScopeNormalizesAndValidatesExtraRoots guard their /tmp assertion with
pathExists("/tmp"), intending to skip it on Windows. But Go resolves the bare
path /tmp against the current drive on Windows, so on any host where C:\tmp
exists the guard passes while the product code (correctly, by design - see
defaultTempWriteRootCandidatesForGOOS) uses %TEMP%/%TMP% instead, and both
tests fail. Gate the assertion on runtime.GOOS != "windows" as well; POSIX
behavior is unchanged.
Co-Authored-By: Claude Fable 5 <[email protected]>
* chore: retrigger CI
The Windows smoke job failed on TestLoadOrCreateSecretConcurrentConverges in internal/oauth, unrelated to this change. Retriggering to confirm it was a flake.
---------
Co-authored-by: Claude Fable 5 <[email protected]>
* Make shortcuts reconfigurable via the config file.
* Use sidebarToggleAllowed. Fix fmt errors.
* Fix: combination matching superset.
* Remove non-default shortcut combination from the comment.
* feat: add --auto flag to changes commit for LLM-generated commit messages
* fix: address CodeRabbit review suggestions on auto-commit message generation
* fix: resolve auto-commit message and flag validation tests
* fix: add 60s timeout for LLM call in --auto and surface --dry-run in help
Addresses gnanam1990 non-blocking feedback:
- Wrap provider call with context.WithTimeout (60s) to prevent hung provider
- Note --dry-run in --auto help text as preview escape hatch
* fix(tools): flag piped POSIX utilities (head/tail/grep/...) before running on Windows
Zero always executes the bash tool through native cmd.exe on Windows
(shellExecutable() in bash.go), but the pre-flight Windows-syntax
detector only caught bash-style `cd /...` and bare `ls`. Anything
piped into head/tail/grep/wc/awk/sed/cut/xargs/tr — very common in
model-generated commands like `git log ... | head` — ran straight
through to cmd.exe, which has no such builtins, wasting a turn on a
guaranteed failure. Reported in the wild via `git log ... | head`
and a `git blame ... | grep` pipeline.
detectShellCommandIssue now also flags these before the command
runs, with the same "translate to cmd.exe / use Zero's native tools"
guidance already used for the cd/ls cases.
Note: the existing detectShellOutputIssue path (matching cmd.exe's
error text post-execution) only recognizes English strings and will
miss this on non-English Windows locales — the pre-flight check
above is locale-independent since it inspects the model-generated
command text rather than cmd.exe's translated error output.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(tools): require whitespace/end after POSIX utility name, not just \b
CodeRabbit review on PR #412: windowsPosixUtilityPattern used \b after
the utility alternation, but \b only requires a non-word character
next — so tail-log.sh, grep-cli, and sed.exe would all false-positive
(the hyphen/dot satisfies \b without being a real command boundary).
Match windowsLSCommandPattern's existing convention: require
whitespace or end-of-string after the utility name instead.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
When config.json has providers configured but none marked active
(e.g. a blank/stale activeProvider field, or a config with 2+
providers where none was ever selected), normalizeProviders threw
away the already-normalized provider list on ErrNoActiveProvider.
That meant the interactive TUI's existing "fall back to an
already-configured usable provider" logic (firstUsableProvider)
never got a chance to run for this case — the app instead wiped
resolved to a zero value and forced the user into a brand-new
onboarding wizard, even though a usable, already-saved provider
existed.
- normalizeProviders/Resolve now return the normalized providers
list alongside ErrNoActiveProvider instead of discarding it.
- runInteractiveTUIWithSetup tries firstUsableProvider on that list
before forcing setup; onboarding only runs when no configured
provider is actually usable, matching the existing fallback
already used for a different flavor of this problem
(active-provider-present-but-no-credential).
Co-authored-by: Claude Sonnet 5 <[email protected]>
Co-authored-by: Vasanth T <[email protected]>
humanCount (the status-line/sidebar token formatter) only ever produced a K
suffix, so a 1,000,000-token context window rendered as "1000K" instead of
"1M" - visible with any 1M-context model (e.g. xai/grok-build-0.1). Its
sibling formatContextWindow already switches to "M" above a million; extend
the same behavior to humanCount, generalized for arbitrary (non-round)
values rather than formatContextWindow's round-number-only heuristic, since
humanCount also renders live, arbitrary "used" token counts.
Co-authored-by: Claude Fable 5 <[email protected]>
`npm install -g @gitlawb/zero` failed on Android/Termux with EBADPLATFORM
because `package.json` `os` array lacked `"android"`. Termux provides a
Linux userspace — the existing `linux-arm64` binary works natively.
- Add `"android"` to the `os` array in package.json.
- Map `android` platform to `linux` in postinstall.mjs resolvePlatform().
Fixes#449
* fix(install): persist install dir to user PATH on Windows
The PowerShell installer only printed a suggestion to add the
install directory to PATH but never actually did it, so `zero`
was unusable from a fresh terminal after install.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
* fix(install): don't abort install if PATH persistence fails
Address CodeRabbit review on PR #407:
- Wrap the [Environment]::SetEnvironmentVariable call in try/catch
so a PATH-persistence failure (e.g. restricted user profile) warns
instead of aborting the whole install under $ErrorActionPreference
= Stop.
- Factor the repeated PATH-contains check for user/session scopes
into a Test-ZeroPathContainsDir helper.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5 <[email protected]>
A malformed/truncated windows-unelevated-setup.json returned a hard error
from loadWindowsUnelevatedSetupMarker, bricking every unelevated command
until the file was hand-deleted, while the unknown-schema path already
reset to an empty marker. Treat corrupt JSON the same way: the marker only
memoizes idempotent ACL applies, so a reset can only cost redundant work,
never skip enforcement.
Addresses the review feedback from coderabbitai and @anandh8x on #427.
Co-authored-by: Claude Fable 5 <[email protected]>
* fix(provider-wizard): allow multiple custom OpenAI-compatible providers
Generic/custom providers (custom-openai-compatible, custom-anthropic-compatible)
all share the same CatalogID. wizardProviderStoredKey matched by CatalogID,
which blocked creating more than one custom provider.
Fix: in advanceProviderWizard, skip the ManageKey diversion for custom
providers and route directly to the endpoint step instead. The user can
overwrite an existing instance by re-entering the same name, or create a
new one with a different name.
Named providers (OpenAI, Anthropic, etc.) are unaffected — ManageKey is
still shown for them.
Fixes#375
* refactor(provider-wizard): deduplicate advance/discovery branch, add anthropic-compatible test
---------
Co-authored-by: Baran3575 <[email protected]>
Before the one-time elevated `zero sandbox setup` has run, Windows dropped
straight from the native sandbox to the in-process policy gate: commands ran
with no OS enforcement at all. But only the WFP network filters actually need
Administrator rights - the write-restricted token and the workspace ACL grants
(DACL edits on user-owned roots) work unelevated.
Add an `unelevated` enforcement tier between native and degraded: when the
elevated setup marker is missing and the profile restricts the filesystem, the
command still wraps through the command runner at a new `unelevated` sandbox
level. The runner applies the workspace ACL plan itself (recording applied
plans by hash in windows-unelevated-setup.json so repeat commands skip the
apply) and launches under the same write-restricted token, so the OS-level
write-jail holds. Network enforcement stays with the per-command approval gate
at this tier, and the downgrade reason says so; profiles that need the sandbox
only for network isolation keep the old degrade behavior, and `--sandbox
require` still errors with the setup hint.
Verified end to end on Windows 11 without elevation: a write inside the
workspace succeeds under the restricted token, a write outside every granted
root is denied by the OS (new ZERO_SANDBOX_REAL_SMOKE integration test, using
cmd.exe because managed PowerShell cannot initialize its crypto provider under
a write-restricted token on some hosts).
Co-authored-by: Claude Fable 5 <[email protected]>
* feat(providers): split minimax zai into intl cn
- Add minimaxi-cn (api.minimaxi.com) sharing model catalog with minimax
- Add zai-cn (open.bigmodel.cn) splitting zai from china to intl
- Decouple env vars: ZAI_API_KEY vs ZHIPU_API_KEY for zai/zai-cn,
MINIMAX_API_KEY vs MINIMAXI_API_KEY for minimax/minimaxi-cn
- Map zai-cn and minimaxi-cn to models.dev providers "zai" and "minimax"
so the model catalog hydrates for both endpoints
* chore(providers): address review feedback on intl/cn split
- Run gofmt on internal/providermodelcatalog/catalog.go (map-value
alignment on the \"zai\" entry was off by one space, fails CI lint)
- Update stale comment in TestResolveAppliesZaiInternationalCatalogDefaults
to say glm-4.5 default (live discovery upgrades to glm-5.2)
- Add missing ProviderKind, APIKeyEnv, and APIKey assertions to
TestResolveAppliesZaiInternationalCatalogDefaults so it would catch
a silent regression in ZAI_API_KEY routing
Add LongCat-2.0 as a first-class OpenAI-compatible provider preset so it can be
selected by name in the setup wizard / `zero providers setup longcat` instead of
hand-entering a custom endpoint.
LongCat-2.0 is Meituan's open, OpenAI- and Anthropic-compatible model. This
wires the OpenAI-compatible transport:
base URL: https://api.longcat.chat/openai (Zero appends /chat/completions)
model: LongCat-2.0
auth: Bearer via LONGCAT_API_KEY
Purely additive — one descriptor plus its catalog/onboarding tests and a README
env-var line; no shared plumbing is touched, so existing providers are
unaffected. Placed with the other OpenAI-compatible third parties (after
moonshot), below the first-party providers.
Verified: go build / vet / test green (catalog + cli onboarding), gofmt clean,
and `zero providers catalog` lists the descriptor with the correct fields.
Endpoint is wired by-spec from LongCat's published docs; a live completion still
needs a real LONGCAT_API_KEY to confirm.
* fix(tui): compose help overlay through the viewport overlay pipeline
exactly like how other popups works.
* fix for the CI/CD of formatting
* Added regression tests for the help overlay
* formatted code
Bun does not run dependency lifecycle scripts by default, so the npm
wrapper's postinstall (which fetches the native Zero binary from GitHub
Releases) is silently skipped. The first run then fails with an
unhelpful "No native binary found" message that points at a source-only
build command, leaving Bun users stuck.
Add a Bun section to README.md and docs/INSTALL.md with the two working
install paths (run postinstall.mjs manually, or add the package to the
project's trustedDependencies). Rewrite the wrapper's missing-binary
error to give an actionable fix for everyone and a Bun-specific hint
when run under Bun, instead of only suggesting a source checkout.
A goroutine dump of a run "stuck for 33 minutes" showed the agent parked
forever in executeToolCall -> requestPermission, blocked on the TUI's
decision channel. Root cause: a shell command whose sandbox decision was
Allow but which requested additional sandbox permissions
(sandbox_permissions: with_additional_permissions) made shouldRequestPermission
block on OnPermissionRequest, yet buildPermissionEvent stamped the event
Action=allow. The TUI's permissionRequestMsg handler only rendered/resolved
Action=prompt requests and silently dropped everything else — so the decide
callback was never called, the agent waited on a channel nothing would signal
(no ctx cancellation on the active run), and the UI showed "Working" with no
prompt and zero network activity. Intermittent and model-dependent: gpt-5.5's
folder-creation command set the additional-permissions flag, glm's did not,
which is exactly why one hung and the other ran clean.
Two-part fix:
- agent (buildPermissionEvent): an additional-permissions request is an
ELEVATION the user must consent to, even over a sandbox Allow, so mark it
Action=prompt (matching shouldRequestPermission's own condition). It now
surfaces as a real prompt instead of a dropped auto-allow.
- tui (permissionRequestMsg handler): enforce the contract that a blocked
agent ALWAYS gets a decision. A non-prompt action resolves immediately and
FAILS CLOSED (deny; cancel stays cancel) so the UI can never silently grant
an unsurfaced permission; a superseded-run (runID mismatch) resolves as
cancel so its parked goroutine unblocks without depending on ctx-cancel
ordering. Matches the ACP handler's always-resolve, fail-closed contract.
Red-green: reverting the tui branch reproduces the deadlock (decide never
called); reverting the agent override reproduces Action=allow. End-to-end
against a mock backend emitting the exact triggering tool call, the real TUI
now renders the permission prompt and the run completes on approval, where
before it parked forever.
The model picker rendered each row's title from the model's description via
modelPickerDisplayName, which returned the description whenever it was non-empty
and not a known-generic placeholder. Catalog/discovery descriptions come from
models.dev as full sentences (e.g. "DeepSeek chat model for instruction
following, coding, and analysis"), and several models share the same sentence —
so the picker showed sentence-long titles and rows that looked like exact
duplicates, with the real model id surviving only in the meta line.
Prefer the (prettified) model id as the row title; fall back to a non-generic
description only when there is no id to name the row. Distinct ids that share a
catalog description now render as distinct rows.
* feat(providers): add KiloCode and OpenCode provider support
Add KiloCode (Kilo Gateway), OpenCode Zen, and OpenCode Go as catalog
entries using the existing openAICompat transport. No new runtime code
needed — both gateways expose standard OpenAI-compatible /chat/completions.
Fixes#383
* fix(providers): swap OpenCode Zen default model to deepseek-v4-flash
gpt-5.5 is served via /responses on Zen, not /chat/completions.
deepseek-v4-flash works with openAICompat transport.
Co-Authored-By: Vasanthdev2004
`zero providers` had no way to list the models a provider actually serves, so a
custom OpenAI-/Anthropic-compatible endpoint (e.g. a self-hosted proxy serving a
dozen models) forced users to hand-write a config object per model. Live model
discovery already existed for the TUI picker but had no headless CLI surface.
Add `zero providers models [name] [--json]`: it probes the provider's live
model-listing endpoint (an OpenAI-compatible /v1/models or the Anthropic /models)
via providermodeldiscovery.Discover, using the profile's base URL and resolved
credential (inline -> stored -> env). This uses the raw discovery primitive with
no curated-catalog merge or coding-model filtering, so a custom provider's full
model list is returned. Configure the provider once, run `zero providers models`
to see what it serves, and use any id with `zero exec --model <id>` (Zero passes
unknown model ids through to the provider) -- no per-model config needed.
Wired through a new appDeps.discoverProviderModels hook (default:
providermodeldiscovery.Discover) so the command is unit-tested hermetically.
Fixes#381.
* fix(config): default missing google/anthropic models from the catalog
A hand-written provider entry like {name: "google", provider_kind:
"google", apiKey: ...} with no model bricked Zero: config resolution
failed with "provider google requires model", and since zero config and
bare zero setup both resolve up front, the only commands that could have
fixed the config died with the same error (reported in the wild — the
one working escape, zero setup google --model <m>, is undiscoverable
from that message).
The openai kind has always defaulted a missing model
(modelregistry.DefaultModelID); google and anthropic were missed. Fall
back to their provider-catalog default models (gemini-2.5-pro /
claude-sonnet-4.5) the same way, behind the same gate: provider-command
configs (normalizeProvidersWithoutModelDefaults) still surface exactly
what the external command returned. An explicitly configured model
always wins, and profiles with a catalogID already got this via
applyCatalogDescriptor — this covers the catalog-less hand-written case.
The residual requires-model error (openai-compatible customs, which
have no catalog default) now carries an actionable hint: add "model" in
config.json or re-run zero setup with --model.
Tests: google/anthropic defaulting (red-green: reverting the google
fallback reproduces the exact reported error), explicit model wins,
provider-command gate still errors with the hint, and validation treats
official-kind model-less profiles as clean while still flagging customs.
* fix(cli): enter setup on a requires-model config and hint zero auth login
Two residual first-run gaps after the catalog model-defaulting fix:
- An active provider whose model has NO catalog default to fall back on
(custom openai-/anthropic-compatible endpoints) still bricked bare
`zero` and `zero setup` — the exact commands that could have repaired
the config. Tag that resolve failure with ErrProviderRequiresModel and
extend the interactive TUI's fixable-error fallback (previously only
ErrNoActiveProvider) to drop into the setup wizard for it. The sentinel
is attached via a message-preserving wrapper (multi-target Unwrap), so
headless commands (zero config / zero exec) print the exact actionable
text unchanged and every other resolve error stays fatal.
- `zero login` / `zero logout` don't exist (it's `zero auth login`);
first-run users try them and got only "unknown command" (reported in
the wild). The unknown-command error now answers: did you mean
"zero auth login"? Unrelated unknown commands get no suggestion.
Tests: the sentinel comes from a REAL Resolve over a real config file
(message-prefix asserted, no key leak); the TUI fallback is red-green
(reverting the condition reproduces the exact brick with the old error);
the existing no-active-provider fallback and other-errors-stay-fatal
tests still pass; login/logout hint with a no-false-positive check.
* fix(tools): CRLF line ending mismatch in edit_file tool on Windows
* fix: resolve gofmt error, add robust CRLF guard, and fix Windows sandbox and OAuth test flakiness
* security(config): project config should not override sandbox.network to allow
* fix(config): use NormalizeNetworkMode in project config merge, per coderabbit review
Every exec against the Google/Gemini provider failed: Zero emits tool
parameter schemas in OpenAI's JSON Schema dialect, which always includes
`additionalProperties` (schemaToRuntimeMap writes it unconditionally).
Google's functionDeclarations schema doesn't recognize that keyword and
400s the whole request — "Unknown name \"additionalProperties\" …
Cannot find field" — so no tool-using call ever reached the model.
Sanitize tool parameters in the Gemini mapper (only there — the field is
valid and wanted for OpenAI strict mode and harmless for Anthropic):
- sanitizeGeminiSchema keeps only the keywords Gemini's Schema type
supports (type, description, enum, properties, required, items, anyOf,
default, nullable, format, and the min/max/length constraints) via an
allowlist, so any future OpenAI-ism or MCP-supplied field can't leak.
- Recurses through properties, items, and anyOf so nested schemas are
cleaned at every depth, not just the top level.
Tests: a unit test on the sanitizer (nesting, legit fields preserved,
nil-safe) and an end-to-end test asserting the outgoing request body's
functionDeclarations[].parameters carry no additionalProperties while the
real schema survives. Bypassing the sanitizer reproduces the reported
payload, so the coverage is red-green.
Fixes#373
On macOS, DefaultUserConfigPath used Go's os.UserConfigDir which returns
~/Library/Application Support, while users (and Claude Code) place config
at ~/.config/zero/config.json. The user config was never read, leaving
activeProvider empty and the launch failing with `active provider "" not
found` on a fresh `go run cmd/zero setup`.
- Add config.UserConfigDir(): on darwin, resolve to ~/.config (honoring
XDG_CONFIG_HOME), matching Linux and Claude Code. DefaultUserConfigPath,
the TUI user-commands dir, and specialist manifests all route through it.
- Add config.ErrNoActiveProvider sentinel; the interactive TUI now drops
into the setup wizard when resolve fails solely due to a missing/
unresolvable active provider, instead of exiting fatally. Other resolve
errors (malformed JSON, directory conflicts) remain fatal.
Note: `zero setup`/`zero auth` already MkdirAll the config dir before
writing, so the directory is auto-created on first write.
Co-authored-by: smallnest <smallnest@gmail>
The publish-npm job now targets the npm-publish environment, whose
required-reviewer rule pauses the job for maintainer approval in the
Actions UI before anything reaches the registry. Also removes the
release-as 0.1.0 pin from release-please-config.json now that v0.1.0
has shipped — leaving it would stamp every future release 0.1.0.
* feat: publish zero to npm via release-please
Adds release-please to automate versioning and releases from
conventional commits on main:
- release-please-config.json / .release-please-manifest.json: node
release type (package.json is the version source of truth), plain
v-prefixed tags, bootstrap-sha at current HEAD, and release-as 0.1.0
to pin the first release (remove after v0.1.0 ships).
- .github/workflows/release-please.yml: maintains the release PR; on
merge it tags + creates the GitHub Release, then dispatches
release-artifacts.yml at the tag (GITHUB_TOKEN-created tags cannot
fire on-push-tags workflows).
- .github/workflows/release-artifacts.yml: tag-gated steps now match
the ref instead of the push event so the dispatched-at-tag run
publishes assets, and a new publish-npm job publishes @gitlawb/zero
after verifying every postinstall asset URL is publicly downloadable
(also blocks publishing while the repo is private).
* Update .github/workflows/release-please.yml
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* feat: publish to npm via OIDC trusted publishing instead of NPM_TOKEN
npm's trusted publishing exchanges the workflow's OIDC token for
publish auth, so no long-lived NPM_TOKEN secret exists to leak, and
provenance is generated automatically. Drops registry-url from
setup-node (its .npmrc line hard-fails on the unset NODE_AUTH_TOKEN)
and updates npm first (OIDC needs npm >= 11.5.1). One-time caveat:
npm only lets you configure a trusted publisher on an existing
package, so the first @gitlawb/zero publish is a manual bootstrap.
* fix: drop npm@latest from the OIDC publish path
Rely on the npm bundled with the pinned Node 24 toolchain (>= 11.5.1,
the trusted-publishing minimum) instead of pulling an unpinned
npm@latest from the registry inside the publish job, and fail fast
with a clear error if a future toolchain change regresses it.
---------
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* fix(auth): propagate credentials to every provider-build surface and pin children to the live provider
Sub-agents, swarm members, ACP sessions, and mid-run escalation switches
could build providers without the credentials the parent was running with.
This consolidates credential resolution so every surface gets the same auth:
- Wrap deps.newProvider once in fillAppDeps to fold the stored API key in
centrally; ACP, exec escalation, and buildProvider no longer patch it
per call site (an apiKeyStored profile previously went out keyless on
those paths and 401'd).
- Export ZERO_PROVIDER at startup (buildProvider) and keep exporting on
every runtime switch (wizard, onboarding, /model, /provider), so spawned
children resolve the parent's live provider instead of whatever another
process last persisted to config.json. Injected via appDeps so tests
never mutate the process environment.
- Share one OAuth login selection end to end: ProviderProfile.
OAuthLoginCandidates (name, then catalog-ID fallback; nothing for a
profile with its own configured credential) + oauth.FirstStored resolve
the login ONCE, and the bound store key is threaded through
providers.Options.OAuthLoginKey so the Codex account-id header always
reads the same login that issued the bearer token. A renamed profile
(name != catalog ID) now finds its login; an explicit API key is never
silently overridden by a same-name or catalog-shared OAuth login.
- Export ProviderProfile.HasConfiguredCredential as the single "profile is
key-authed" predicate (cli/tui/config previously had three copies).
- applyProviderWizard commits live state (provider, profile, name, env
export) only after BOTH the build and the config persist succeed, so a
persist failure no longer leaves the chat running on a provider the
status line and children disagree with.
Covered by red-green tests for each path: stored-key wrap, escalation
switch, catalog-ID fallback (incl. case-variant names), explicit-key
protection, same-login account selection, wizard persist-failure rollback,
onboarding/startup env export.
* test: isolate OAuth/config test storage and fix the flaky MCP response-id test
Review + CI fixes, all test-only:
- factory/cli OAuth tests: pin ZERO_OAUTH_STORAGE=file next to the temp
ZERO_OAUTH_TOKENS_PATH — an inherited "keyring" value sends NewStore to
the OS keychain and ignores the temp path entirely, so the tests could
read (or clobber) the developer's real logins. newOAuthStoreForTest now
owns both pins so a future call site can't forget them.
- TestApplyProviderWizardExportsActiveProviderEnv: point m.userConfigPath
at a temp config and stub newProvider, so the SUCCESS path exercises the
full build+persist+commit sequence in isolation (the default empty path
silently skipped persist; a changed default must never reach the real
user config).
- TestClientRequestWaitsForMatchingResponseID (ubuntu smoke flake): the
responses were pre-loaded into a bytes.Buffer, so the client's reader
goroutine could consume the matching response — and hit EOF — before
request() registered its pending id, failing with "request() error =
EOF" on fast runners. The fake server now sits on pipes and responds
only after reading the outgoing request, matching production ordering;
survives -race -count=50.
* feat(tui): FILES sidebar panel with click-to-select and file drill-in
Add a FILES section to the right context sidebar showing the files the
session has touched — newest first, with A/M status badges, aggregated
+/− diffstats, and a pulsing row for the file being written right now.
Clicking a row selects the file (accent marker, edit cards tint in the
chat, transcript scrolls to the latest edit); a second click opens a
drill-in view: the chat column swaps to the file's stacked edit cards,
`f` toggles to the syntax-highlighted on-disk file with markers on
session-added lines, `d` back to diff, Esc returns to the chat.
The roster is fed from two sources: changedFiles carried by
write_file/edit_file/apply_patch results (persisted per session, so it
survives /resume), and a git sweep — baseline snapshot at startup,
re-check after command tools and at turn end — so files created through
bash/exec_command scaffolding or subagents show up too.
* fix(tui): address FILES sidebar review findings
Review fixes for the FILES panel / drill-in / git sweep:
- touchedFiles: split multi-file diffs per file (perFileDiffStats) so an
apply_patch spanning several files no longer charges the whole patch's
+/- totals to every file it touched; order by lastRowIndex descending
so a re-touched file lists first (reversing first-seen order kept it in
its original slot).
- sidebarFileLines: filter the live-writing row out before computing the
"+N more" trailer so the skipped entry no longer inflates the count.
- git sweep: run `git diff --numstat -z` and parse the NUL-terminated
rename records (counts + preimage + postimage) — plain --numstat
brace-mangles renamed paths ("src/{old => new}"), so their diffstat
never matched a porcelain path and renamed files stayed at 0/0;
gitTouchedFiles now yields newest detection first to match the
roster's ordering.
- file view: stream the full-mode read and stop at fileViewMaxLines
(os.ReadFile loaded a multi-GB file wholesale before truncating — the
exact freeze the cap exists to prevent); re-opening the file already
being viewed is a no-op so a stray re-click can't bounce full mode
back to diff or reset scroll; skip sub-4-char lines in the changed-line
markers so common braces/returns don't mark unrelated occurrences.
- keys: gate the drill-in's d/f and Esc handling on noBlockingModal so a
permission prompt / ask-user / wizard keeps its own key handling.
- sidebar: a live in-flight write counts as content, so the FILES pulse
shows for the session's first mutation.
- tests: numstat test now feeds real -z record shapes and asserts the
rename postimage key; new coverage for per-file stats, re-touch
ordering, live-row overflow, same-file reopen, truncation, modal
gating, live-write content, and a real-repo rename sweep.
---------
Co-authored-by: Gnanam <[email protected]>
2026-07-02 12:15:41 +05:30
803 changed files with 93657 additions and 7276 deletions
for url in "${base}/${asset}" "${base}/${asset}.sha256"; do
if ! curl -fsSLI -o /dev/null "$url"; then
echo "::error::${url} is not publicly downloadable — the wrapper's fallback downloader and install.sh would fail. Is the repo public and are all assets uploaded?" >&2
exit 1
fi
done
done
echo "all release assets for v${version} are publicly downloadable."
echo "::error::dist-tag latest points at platform version ${latest} — a platform publish clobbered it. Fix the dist-tag before the wrapper publish." >&2
exit 1
;;
esac
echo "dist-tag latest is ${latest} (unchanged by platform publishes)."
* **providers:** add Fireworks AI provider preset ([#772](https://github.com/Gitlawb/zero/issues/772)) ([58daea7](https://github.com/Gitlawb/zero/commit/58daea7a482927e5ab35afaf97761c60bb35e113))
* **skills:** report hash drift in skill info ([#795](https://github.com/Gitlawb/zero/issues/795)) ([9fbdc34](https://github.com/Gitlawb/zero/commit/9fbdc341551601c13434cf7b9b6f5e4ea4c483b1))
### Bug Fixes
* **acp:** interrupt idle reads on cancellation ([#782](https://github.com/Gitlawb/zero/issues/782)) ([15b7a54](https://github.com/Gitlawb/zero/commit/15b7a5475cfeefddbc59634551451a8872b996b7))
* **cli:** include plugins info in shell completions ([#794](https://github.com/Gitlawb/zero/issues/794)) ([fa8734f](https://github.com/Gitlawb/zero/commit/fa8734f17927de8832dfe041e043cfb86f93d12a))
* **config:** kill provider-command process tree via job object on Windows ([#690](https://github.com/Gitlawb/zero/issues/690)) ([5c58256](https://github.com/Gitlawb/zero/commit/5c58256abc29c185b449f8ce79647eb3fae61882))
* **config:** make the provider-command timeout an upper bound ([#811](https://github.com/Gitlawb/zero/issues/811)) ([#813](https://github.com/Gitlawb/zero/issues/813)) ([1c38e8c](https://github.com/Gitlawb/zero/commit/1c38e8cba50db255f3cda8b7cf4298712b2933e1))
* **config:** stop billing provider-command fixtures to the 5s timeout ([#810](https://github.com/Gitlawb/zero/issues/810)) ([f5fa4ff](https://github.com/Gitlawb/zero/commit/f5fa4ffc64537897aa78a56edca36d8f1dacd021))
* **providers:** retry provably pre-send transport failures ([#447](https://github.com/Gitlawb/zero/issues/447)) ([#750](https://github.com/Gitlawb/zero/issues/750)) ([8acd42a](https://github.com/Gitlawb/zero/commit/8acd42a3bd743a35807d762f23a33fb61c171839))
* **sandbox:** add platform-specific write lock around grant state file ([#752](https://github.com/Gitlawb/zero/issues/752)) ([#755](https://github.com/Gitlawb/zero/issues/755)) ([88fb7b6](https://github.com/Gitlawb/zero/commit/88fb7b6192c1ac8173089967d5e9119f92d7a101))
* **swarm:** close lifecycle admission on shutdown ([#776](https://github.com/Gitlawb/zero/issues/776)) ([bdbda89](https://github.com/Gitlawb/zero/commit/bdbda89f3e42d93e8058ab3e1e9ef402659530cd))
* **tui:** fix rendering corruption over multipass + Windows Terminal ([#709](https://github.com/Gitlawb/zero/issues/709)) ([5bb1bc1](https://github.com/Gitlawb/zero/commit/5bb1bc11c3188dcea7709ff07c8b25dda3541de8))
* **tui:** paste clipboard images with Ctrl+V ([#534](https://github.com/Gitlawb/zero/issues/534)) ([#807](https://github.com/Gitlawb/zero/issues/807)) ([ec3b822](https://github.com/Gitlawb/zero/commit/ec3b8225050eb62f0f41a9582ed2881d2f9dcc8e))
* **tui:** reset quiet clock for new runs ([#799](https://github.com/Gitlawb/zero/issues/799)) ([a4a805a](https://github.com/Gitlawb/zero/commit/a4a805a6c82c51cb255e909bd87ca183c8805cf2))
* **windows:** use PowerShell for command execution ([#804](https://github.com/Gitlawb/zero/issues/804)) ([518d2e5](https://github.com/Gitlawb/zero/commit/518d2e53ba3fa073090a9b41c278face85b59b64))
* **plugins:** add zero plugins info command ([#773](https://github.com/Gitlawb/zero/issues/773)) ([2479884](https://github.com/Gitlawb/zero/commit/2479884dea49580c853a53536c3bbab22ce8a2bf))
* **sandbox:** disable the sandbox via config ([#687](https://github.com/Gitlawb/zero/issues/687)) ([#746](https://github.com/Gitlawb/zero/issues/746)) ([a21a052](https://github.com/Gitlawb/zero/commit/a21a052a4a32ce9cb3c93c94350cd24e138532cd))
* **sandbox:** unify command execution and enforcement ([#781](https://github.com/Gitlawb/zero/issues/781)) ([96859c9](https://github.com/Gitlawb/zero/commit/96859c9bd16f6dad4e332efc7e68178b9116118a))
* **tui:** add /undo as an alias for /rewind ([#698](https://github.com/Gitlawb/zero/issues/698)) ([#747](https://github.com/Gitlawb/zero/issues/747)) ([8c6d302](https://github.com/Gitlawb/zero/commit/8c6d3022bd7801eaad6a0440bb21a27221887297))
* **lsp:** make the real-gopls check opt-in so a broken gopls can't fail the suite ([#684](https://github.com/Gitlawb/zero/issues/684)) ([#766](https://github.com/Gitlawb/zero/issues/766)) ([b1f4173](https://github.com/Gitlawb/zero/commit/b1f41735a7f6b7928a1875e986a4dca39d106cb9))
* make extension installs transactional ([#762](https://github.com/Gitlawb/zero/issues/762)) ([baa4be1](https://github.com/Gitlawb/zero/commit/baa4be13ac5321da4e9f53e864dd1cd395481200))
* **oauth:** refuse redirects on credential POSTs ([#729](https://github.com/Gitlawb/zero/issues/729)) ([#741](https://github.com/Gitlawb/zero/issues/741)) ([974fc03](https://github.com/Gitlawb/zero/commit/974fc036c2f9a194722f2e8fddbb4fdbf797effe))
* **oauth:** validate discovered endpoints before merge/use ([#511](https://github.com/Gitlawb/zero/issues/511)) ([#739](https://github.com/Gitlawb/zero/issues/739)) ([ce4a996](https://github.com/Gitlawb/zero/commit/ce4a996ffac4482e704f0fd61b3e442398fb2401))
* **perfbench:** absolutize the bench binary and make errored tasks first-class ([#730](https://github.com/Gitlawb/zero/issues/730)) ([dbd9443](https://github.com/Gitlawb/zero/commit/dbd94430143df6754d68551d1028ad8f15b82f1b))
* **perfbench:** grant write tools so mutating tasks measure real edits ([#763](https://github.com/Gitlawb/zero/issues/763)) ([e1975c1](https://github.com/Gitlawb/zero/commit/e1975c1b396b3236ed648870230b4f85863b1d03))
* **perfbench:** keep the stamped answer file out of negative oracle greps ([#737](https://github.com/Gitlawb/zero/issues/737)) ([015452c](https://github.com/Gitlawb/zero/commit/015452c1c98a39eabb021324182094e188a8bd47))
* **providers:** stop "provider not found" for env-derived profiles ([#716](https://github.com/Gitlawb/zero/issues/716)) ([4cbd144](https://github.com/Gitlawb/zero/commit/4cbd144d11e5cb67bc5fea46f5b294562dac7a1a))
* **sandbox:** AST second opinion for interactive-command bypasses ([#473](https://github.com/Gitlawb/zero/issues/473)) ([#745](https://github.com/Gitlawb/zero/issues/745)) ([f079b90](https://github.com/Gitlawb/zero/commit/f079b90f82dac7b7ae0864b279dc9094e31a6627))
* **sandbox:** bind Windows elevated ACL setup to one no-follow handle ([#765](https://github.com/Gitlawb/zero/issues/765)) ([4945684](https://github.com/Gitlawb/zero/commit/4945684fa26aa5994eda59dcabedc817423c535d))
* **tools:** give write_stdin's invalid-session errors the same recovery guidance ([#749](https://github.com/Gitlawb/zero/issues/749) follow-up) ([#768](https://github.com/Gitlawb/zero/issues/768)) ([da9fb50](https://github.com/Gitlawb/zero/commit/da9fb50f549f6701eb136fc99f6178d0772d9334))
* **tools:** read_file recovers a backwards line range instead of erroring ([#779](https://github.com/Gitlawb/zero/issues/779)) ([89bdc67](https://github.com/Gitlawb/zero/commit/89bdc6719a1e1b3a3ef0e36b91a7839b3efdfba9))
* **tui:** model rows labelled by id when the description is prose; keep the sidebar under the / palette ([#775](https://github.com/Gitlawb/zero/issues/775)) ([b30c397](https://github.com/Gitlawb/zero/commit/b30c3971b40b06ba52ad649ba9dc0ad560d4be4c))
* **tui:** stop the permission card clashing on cool themes ([#778](https://github.com/Gitlawb/zero/issues/778)) ([722bb31](https://github.com/Gitlawb/zero/commit/722bb3121682d9cd9cd4bc6c127e9014d719262a))
* **aimlapi:** AI/ML API provider with guided onboarding (top-up + key issuance) ([#655](https://github.com/Gitlawb/zero/issues/655)) ([6b9c2f0](https://github.com/Gitlawb/zero/commit/6b9c2f0c083e02bcd3aad68fb7af0501a9e7cd61))
* **cli:** show ZERO wordmark on --version ([#673](https://github.com/Gitlawb/zero/issues/673)) ([9acb411](https://github.com/Gitlawb/zero/commit/9acb4113cc3337b3f361a16278e9cf11ca105e34))
* **tui:** Ctrl+X leader chords and emacs menu navigation ([#699](https://github.com/Gitlawb/zero/issues/699)) ([7f669f4](https://github.com/Gitlawb/zero/commit/7f669f455021be51319ee3b8298cd48a17f745c7))
* **tui:** press up to edit queued messages ([#656](https://github.com/Gitlawb/zero/issues/656)) ([4c986d3](https://github.com/Gitlawb/zero/commit/4c986d327b5ed26338d295c23bea5839681db8d0))
### Bug Fixes
* **acp:** make truncateHint rune-safe ([#614](https://github.com/Gitlawb/zero/issues/614)) ([ddc4927](https://github.com/Gitlawb/zero/commit/ddc4927aac5544bf4dd2c46615aeda5a81c96576))
* **agent,tui:** resolve git branch detection when starting Zero in subdirectories ([#613](https://github.com/Gitlawb/zero/issues/613)) ([0184581](https://github.com/Gitlawb/zero/commit/0184581ec234ea414e0a47bc33e8b0f4ddfb497b))
* **agent:** raise default and deep-mode turn budgets ([#650](https://github.com/Gitlawb/zero/issues/650)) ([635c93a](https://github.com/Gitlawb/zero/commit/635c93af51ebc20f3e0917917e55a79edfe27c35))
* **cli:** prevent consuming positional arguments as flag values ([#619](https://github.com/Gitlawb/zero/issues/619)) ([5b4f48d](https://github.com/Gitlawb/zero/commit/5b4f48d2dcb66402c13bde0c3cfe9c9371da19fb))
* **config:** enforce MCP trust boundary so project config cannot override user disable ([#609](https://github.com/Gitlawb/zero/issues/609)) ([4d8c31c](https://github.com/Gitlawb/zero/commit/4d8c31cf16a3080344e3be7039408fcae71c075d)), closes [#512](https://github.com/Gitlawb/zero/issues/512)
* **config:** surface unknown/typo'd config fields instead of silently dropping them ([#645](https://github.com/Gitlawb/zero/issues/645)) ([893b7b4](https://github.com/Gitlawb/zero/commit/893b7b424cc203a2fcf92327a4e25c84286a90e0))
* **hooks:** fail closed on launch failures for beforeTool hooks ([#629](https://github.com/Gitlawb/zero/issues/629)) ([dc06fe7](https://github.com/Gitlawb/zero/commit/dc06fe72caf45f72d2cba1e8a835c0f5b405c1e8))
* **hooks:** run sessionEnd hooks after Esc/Ctrl+C interrupts ([#606](https://github.com/Gitlawb/zero/issues/606)) ([824ecdb](https://github.com/Gitlawb/zero/commit/824ecdbcf9c467c35ef4e2666770fdadcb5bf402))
* **keyring:** pass generic password via stdin on macOS ([#574](https://github.com/Gitlawb/zero/issues/574)) ([91ea6de](https://github.com/Gitlawb/zero/commit/91ea6ded7503538834a84d090f78670a363c62d3))
* **lock:** prevent POSIX lock file overwrite and leak on Windows/Unix ([#628](https://github.com/Gitlawb/zero/issues/628)) ([da41c3a](https://github.com/Gitlawb/zero/commit/da41c3a75b782d6e0836fe13346321e40a90fbb4))
* **sandbox:** remove windowsWriteRestricted flag to fix DenyRead bypass ([#612](https://github.com/Gitlawb/zero/issues/612)) ([3d96ac7](https://github.com/Gitlawb/zero/commit/3d96ac7e55c760a97f28c0e6ceaf1ec3b4ab717a))
* **sandbox:** scrub dynamic credential env vars ([#682](https://github.com/Gitlawb/zero/issues/682)) ([9043bae](https://github.com/Gitlawb/zero/commit/9043baedcff7776c7373645b57563cac06b31847))
* **sandbox:** scrub sensitive credentials from sandbox environment ([#660](https://github.com/Gitlawb/zero/issues/660)) ([6fc1220](https://github.com/Gitlawb/zero/commit/6fc1220f6ac66fb3ae67b637cbbed7068d2213c0))
* **sandbox:** unblock git fetch/commit/add under the write-restricted sandbox ([#654](https://github.com/Gitlawb/zero/issues/654)) ([5c4815a](https://github.com/Gitlawb/zero/commit/5c4815a66ed07d9cf90b825adfd936d3ac07639d))
* **sandbox:** use WRITE_RESTRICTED token when no DenyRead paths are configured ([#658](https://github.com/Gitlawb/zero/issues/658)) ([a5d2e32](https://github.com/Gitlawb/zero/commit/a5d2e327c8681671aa8a9e5378801215b747edcf))
* **securefile,credstore:** call Sync on temp file before close and rename ([#631](https://github.com/Gitlawb/zero/issues/631)) ([212734a](https://github.com/Gitlawb/zero/commit/212734adf3b5f982e22385161205aa1afe4634fe))
* **securefile:** reclaim stale lock files to prevent permanent DOS ([#615](https://github.com/Gitlawb/zero/issues/615)) ([8536cc8](https://github.com/Gitlawb/zero/commit/8536cc87f7a885f9e436d6ef28f5f325201623dc))
* **swarm:** wait for job.Runs directly in scheduler skip test ([#667](https://github.com/Gitlawb/zero/issues/667)) ([1bb6b57](https://github.com/Gitlawb/zero/commit/1bb6b5745af90321d1e657a12a1976cded5dd1bd))
* **tools:** classify silent wrapped Windows command failures as sandbox denials ([#659](https://github.com/Gitlawb/zero/issues/659)) ([8bd9742](https://github.com/Gitlawb/zero/commit/8bd9742fa95c41b93ea4e718628aed0ff3ae9dd0))
* **tools:** preserve SysProcAttr during PTY fallback ([#618](https://github.com/Gitlawb/zero/issues/618)) ([f78b36c](https://github.com/Gitlawb/zero/commit/f78b36c770daa4577a9f99265b18a354454e36eb))
* **tui:** stop the composer cursor blinking while typing or unfocused ([#672](https://github.com/Gitlawb/zero/issues/672)) ([2b42cd5](https://github.com/Gitlawb/zero/commit/2b42cd567b96d6f7e0818594e53ff31cce1e42e9))
* **windows:** resolve absolute path for taskkill to prevent hijacking ([#617](https://github.com/Gitlawb/zero/issues/617)) ([2db00ee](https://github.com/Gitlawb/zero/commit/2db00ee3d57db97e0fbe23cb8628e8bcb47f6f09))
* **modelregistry:** infer reasoning efforts for Hunyuan and vendor-prefixed model ids ([#599](https://github.com/Gitlawb/zero/issues/599)) ([92a92ce](https://github.com/Gitlawb/zero/commit/92a92ceb29dc63f5216ab140ef9a6dd9afe17df8))
* **tui:** show CLI version on the startup home screen ([#538](https://github.com/Gitlawb/zero/issues/538)) ([fd69233](https://github.com/Gitlawb/zero/commit/fd69233e334f1823a06b5794085a9255b3abdfa8))
* address bugs found in a multi-agent codebase audit ([#481](https://github.com/Gitlawb/zero/issues/481)) ([008bc9b](https://github.com/Gitlawb/zero/commit/008bc9b3f3ba13c7d4822b9559b020f381ff555b))
* **agent:** keep tools exposed for max-turn finalization ([#533](https://github.com/Gitlawb/zero/issues/533)) ([3f0503b](https://github.com/Gitlawb/zero/commit/3f0503bc2312ae29d5ade784d8824dc9a3524958))
* **auth:** persist OpenRouter API key after login ([#595](https://github.com/Gitlawb/zero/issues/595)) ([2a062aa](https://github.com/Gitlawb/zero/commit/2a062aa4014c6cd5e20a57dad4a685f88966f109))
* bump Go to 1.26.5 for crypto/tls fix (GO-2026-5856) ([#607](https://github.com/Gitlawb/zero/issues/607)) ([a7cfb99](https://github.com/Gitlawb/zero/commit/a7cfb99fed7b88ebc09a2f251cb82864d3c2cade))
* gitignore Windows sandbox helpers and npm version marker ([#578](https://github.com/Gitlawb/zero/issues/578)) ([25653f6](https://github.com/Gitlawb/zero/commit/25653f686c016f95b81ceb7ff5d5452d37c4d4f3))
* **sandbox:** Windows-appropriate suggestions when blocking interactive commands ([#414](https://github.com/Gitlawb/zero/issues/414)) ([ba4c007](https://github.com/Gitlawb/zero/commit/ba4c00755dc1c31b3dcca18e50b20f62c6bf5d1f))
* **tools:** block MSYS and WSL shells under the Windows sandbox ([#587](https://github.com/Gitlawb/zero/issues/587)) ([0666818](https://github.com/Gitlawb/zero/commit/066681855b80e3baf5d07d7397610b25f724e353))
* **tools:** platform-specific pager suggestions, quote/caret-safe cd detection ([#543](https://github.com/Gitlawb/zero/issues/543)) ([8b248f4](https://github.com/Gitlawb/zero/commit/8b248f4e1198dc86ab332a697fba4cf520823cbd))
* **tools:** Windows cmd.exe quoting guidance and clipboard escaping fix ([#468](https://github.com/Gitlawb/zero/issues/468)) ([f10ed0c](https://github.com/Gitlawb/zero/commit/f10ed0c893ce6de08923f143d681ba96f0fcfe3a))
* **tui:** bypass toggleSidebar and toggleMouse global shortcuts when composer is non-empty ([#576](https://github.com/Gitlawb/zero/issues/576)) ([c7346fb](https://github.com/Gitlawb/zero/commit/c7346fbcf01fe7e70ed2fcfccbf9965e5985727b))
* **tui:** paste protection for Termux char-by-char paste ([#573](https://github.com/Gitlawb/zero/issues/573)) ([8e9149f](https://github.com/Gitlawb/zero/commit/8e9149f1a296bebebf95cae9dd2a7c5156c9dbb6))
* **tui:** update picker_test for switchProviderModel 4-value return ([#589](https://github.com/Gitlawb/zero/issues/589)) ([8f15650](https://github.com/Gitlawb/zero/commit/8f156506dc92449bd24caa14e36f28477ba00fff))
* **update:** support safe symlink extraction during updates ([#575](https://github.com/Gitlawb/zero/issues/575)) ([ce9cb91](https://github.com/Gitlawb/zero/commit/ce9cb912958a3d9ae0b052bfebb849c28e0e719b))
* warn about untracked scratch files left behind after a run ([#571](https://github.com/Gitlawb/zero/issues/571)) ([062328b](https://github.com/Gitlawb/zero/commit/062328b632a2d27353a6d47c522bbd22d7282539))
### Performance Improvements
* **grep:** stop content scan after head limit ([#601](https://github.com/Gitlawb/zero/issues/601)) ([8a05e64](https://github.com/Gitlawb/zero/commit/8a05e6486f7a63281b869064db03dfc5531e6a04))
* add --auto flag for LLM-generated commit messages ([#423](https://github.com/Gitlawb/zero/issues/423)) ([b0abde7](https://github.com/Gitlawb/zero/commit/b0abde7d0697e808480cd59d69a6f4d0c6320475))
* add zero changes push and pr subcommands, and extra repo-info metrics ([#391](https://github.com/Gitlawb/zero/issues/391)) ([2312abe](https://github.com/Gitlawb/zero/commit/2312abe5ddd95f4c6ef373cfb61cc03092f48cdd))
* agent quality, caching, retry, and tooling upgrades ([#506](https://github.com/Gitlawb/zero/issues/506)) ([3c81fea](https://github.com/Gitlawb/zero/commit/3c81fea22873ee3df7fc97b10cb4f77792706c4b))
* **agent:** curb over-engineering the solution in the editing discipline ([#517](https://github.com/Gitlawb/zero/issues/517)) ([f4c998a](https://github.com/Gitlawb/zero/commit/f4c998ac30c4f07ff313a2d706791e857293be49)), closes [#516](https://github.com/Gitlawb/zero/issues/516)
* **agent:** inject per-user config.UserConfigDir()/zero/ZERO.md guidelines into system prompt ([#475](https://github.com/Gitlawb/zero/issues/475)) ([7b10aab](https://github.com/Gitlawb/zero/commit/7b10aab74bf14a01166b2cea22deab79bba9850b))
* **providers:** add `zero providers models` to discover a provider's models ([#386](https://github.com/Gitlawb/zero/issues/386)) ([0bc8074](https://github.com/Gitlawb/zero/commit/0bc8074c97b0310e4a9d70c3f967003ee5e8a59f))
* **providers:** add KiloCode and OpenCode provider support ([#388](https://github.com/Gitlawb/zero/issues/388)) ([b1ccb6d](https://github.com/Gitlawb/zero/commit/b1ccb6d9c1875377f5e5ea81a1304edd1e41ab4f))
* **providers:** split minimax zai into intl cn ([#398](https://github.com/Gitlawb/zero/issues/398)) ([aaad4d2](https://github.com/Gitlawb/zero/commit/aaad4d271270f41af837b6f3b60ae80beba0c645))
* require manual approval before npm publish + drop release-as pin ([#369](https://github.com/Gitlawb/zero/issues/369)) ([bd89a1f](https://github.com/Gitlawb/zero/commit/bd89a1f451643c1b65ec803070abc7b116631ebe))
* **sandbox:** unelevated Windows fallback tier instead of prompts-only degrade ([#427](https://github.com/Gitlawb/zero/issues/427)) ([b9ddd6f](https://github.com/Gitlawb/zero/commit/b9ddd6f42138312a1fee8d8bb67c46c8eb1dea2f))
* support shift enter for composer newlines ([#462](https://github.com/Gitlawb/zero/issues/462)) ([daf65e0](https://github.com/Gitlawb/zero/commit/daf65e0af9a040314d4ab337b0ad59c55416b7bc))
* **tui:** /loop — repeat a prompt or command on an interval or self-paced ([#502](https://github.com/Gitlawb/zero/issues/502)) ([387fe67](https://github.com/Gitlawb/zero/commit/387fe67ee7cd81317c9c969f5906a4437080fea3))
* **tui:** add search/filter to provider picker in setup wizard ([#400](https://github.com/Gitlawb/zero/issues/400)) ([2fcea71](https://github.com/Gitlawb/zero/commit/2fcea71778d23e050c93409c471aef45b68c1621))
* **update:** add zero upgrade command to apply self-updates ([#461](https://github.com/Gitlawb/zero/issues/461)) ([5f36349](https://github.com/Gitlawb/zero/commit/5f36349c1884e81fa9bc66bb5fe813b627e897b7))
### Bug Fixes
* **action:** keep provider key scoped to zero step ([#448](https://github.com/Gitlawb/zero/issues/448)) ([407a927](https://github.com/Gitlawb/zero/commit/407a92739ff508cba32d2c12b3f36f0efcdd54c3))
* add android platform support for Termux npm install ([#455](https://github.com/Gitlawb/zero/issues/455)) ([9bd93c6](https://github.com/Gitlawb/zero/commit/9bd93c62f8d57fb74057284aa66a1b6e1429dcdd)), closes [#449](https://github.com/Gitlawb/zero/issues/449)
* **agent:** reject a malformed additional_permissions payload before prompting ([#453](https://github.com/Gitlawb/zero/issues/453)) ([e4f760e](https://github.com/Gitlawb/zero/commit/e4f760ee8bd57299cd2fcb37e8e23130037c2607))
* allow non-TLS connections to private-network provider endpoints ([#444](https://github.com/Gitlawb/zero/issues/444)) ([1d86384](https://github.com/Gitlawb/zero/commit/1d8638466ca31517eb9db2b9353d3dce1cbeeabc))
* **auth:** route zero auth login chatgpt to the dedicated ChatGPT flow ([#443](https://github.com/Gitlawb/zero/issues/443)) ([305a62c](https://github.com/Gitlawb/zero/commit/305a62c954ca6cec00bc58d5398f933415156aff))
* **config:** fall back to a usable saved provider instead of forcing full re-onboarding ([#410](https://github.com/Gitlawb/zero/issues/410)) ([c60ad87](https://github.com/Gitlawb/zero/commit/c60ad8729f79bb841114d352ee2d2fe29d5d0e41))
* **config:** let a gateway ANTHROPIC_BASE_URL resolve as anthropic-compatible ([#497](https://github.com/Gitlawb/zero/issues/497)) ([30dd7c3](https://github.com/Gitlawb/zero/commit/30dd7c3112ad22d42fa12b5addd4e38f4beda42a)), closes [#479](https://github.com/Gitlawb/zero/issues/479)
* **config:** unbrick first-run setup — default google/anthropic models, enter setup on fixable config errors ([#385](https://github.com/Gitlawb/zero/issues/385)) ([72eed06](https://github.com/Gitlawb/zero/commit/72eed06b4f94c43d75d31fe54a58d2f566de059e))
* **config:** use ~/.config on macOS and enter setup when no provider ([#371](https://github.com/Gitlawb/zero/issues/371)) ([#372](https://github.com/Gitlawb/zero/issues/372)) ([027a8f2](https://github.com/Gitlawb/zero/commit/027a8f2768b17b89f5c8270887f156e2ccda69ea))
* **install:** persist install dir to user PATH on Windows ([#407](https://github.com/Gitlawb/zero/issues/407)) ([bdb1b0e](https://github.com/Gitlawb/zero/commit/bdb1b0ecd15859b1712a6037d296dace7f9c3c3f))
* **oauth:** treat Windows ERROR_ACCESS_DENIED as lock contention in createSecretFile ([#445](https://github.com/Gitlawb/zero/issues/445)) ([d05e914](https://github.com/Gitlawb/zero/commit/d05e9148a7f79f67d1d3c31fca2775f21fbd331e))
* **sandbox:** fix nested pipe creation under the Windows restricted token ([#456](https://github.com/Gitlawb/zero/issues/456)) ([563a6db](https://github.com/Gitlawb/zero/commit/563a6dbe91e65d5daeefd7626e8a77e30a6d8fb2))
* **sandbox:** gate /tmp test assertions on GOOS, not path existence ([#426](https://github.com/Gitlawb/zero/issues/426)) ([f653dca](https://github.com/Gitlawb/zero/commit/f653dcac363fb69ad7be5b35e6e0fa6d2bce476d))
* **sandbox:** self-heal a corrupt unelevated setup marker ([#437](https://github.com/Gitlawb/zero/issues/437)) ([8d0c5fe](https://github.com/Gitlawb/zero/commit/8d0c5feccb8bdbfb015df0508aa6e3bcbd1fd0e8))
* **specialist:** cap max specialist nesting depth ([#491](https://github.com/Gitlawb/zero/issues/491)) ([177442c](https://github.com/Gitlawb/zero/commit/177442cfe4015bd8df04cc9894f98b468ee796d4))
* **tools:** Block MSYS coreutils under Windows sandbox ([#476](https://github.com/Gitlawb/zero/issues/476)) ([81aad58](https://github.com/Gitlawb/zero/commit/81aad58d97839e51c068e2f08907618991fdc3fb))
* **tools:** CRLF line ending mismatch in edit_file tool on Windows ([#378](https://github.com/Gitlawb/zero/issues/378)) ([33dc7ae](https://github.com/Gitlawb/zero/commit/33dc7ae2cc82c5389675531e1416856dae7151ce))
* **tools:** flag piped POSIX utilities before running on Windows ([#412](https://github.com/Gitlawb/zero/issues/412)) ([5658a36](https://github.com/Gitlawb/zero/commit/5658a366274fc59a9d5336b06a21019c9c25cbf1))
* **tools:** make grep and glob respect run cancellation ([#464](https://github.com/Gitlawb/zero/issues/464)) ([ba6c026](https://github.com/Gitlawb/zero/commit/ba6c0264697b7d7ed479f6e782fba9700a481e3d))
* **tools:** require permission before web_search requests ([#382](https://github.com/Gitlawb/zero/issues/382)) ([960db96](https://github.com/Gitlawb/zero/commit/960db9660e4e31dc588fe8f7d6f116ff5e225566))
* **tui:** compose help overlay through the viewport overlay pipeline ([#421](https://github.com/Gitlawb/zero/issues/421)) ([5b2b4de](https://github.com/Gitlawb/zero/commit/5b2b4dea1aaf9e0f68baa25e97e83296fb17b1a2))
* **tui:** keep the profile name on /model switch so the stored key resolves ([#441](https://github.com/Gitlawb/zero/issues/441)) ([9134148](https://github.com/Gitlawb/zero/commit/9134148f4df3e4e556fba6c2f8babfdf6fcfeee1)), closes [#440](https://github.com/Gitlawb/zero/issues/440)
* **tui:** resolve every permission request so the agent can't deadlock ([#397](https://github.com/Gitlawb/zero/issues/397)) ([952788f](https://github.com/Gitlawb/zero/commit/952788f72d32957659fe004521fcc8372b9ba9b4))
* **tui:** show an M suffix for million-scale token counts ([#457](https://github.com/Gitlawb/zero/issues/457)) ([0562e3b](https://github.com/Gitlawb/zero/commit/0562e3bef7df2328610a48a1e81632a8da4aec64))
* **tui:** title /model rows by model name, not the catalog description ([#395](https://github.com/Gitlawb/zero/issues/395)) ([cdf9d83](https://github.com/Gitlawb/zero/commit/cdf9d839ae57a729f292f36f7c5b0c67b41b288d))
### Performance Improvements
* cache TUI model registry ([#496](https://github.com/Gitlawb/zero/issues/496)) ([e7d88b4](https://github.com/Gitlawb/zero/commit/e7d88b4b518049733da25a8447c00144bd1da518))
* publish zero to npm via release-please ([#367](https://github.com/Gitlawb/zero/issues/367)) ([8eccc26](https://github.com/Gitlawb/zero/commit/8eccc2669887bc38d35bc16a315c888e4d9ec43a))
* **tui:** FILES sidebar panel with click-to-select and file drill-in ([#365](https://github.com/Gitlawb/zero/issues/365)) ([142c548](https://github.com/Gitlawb/zero/commit/142c548c89a8652ce300e64ddf1228ee36df7606))
### Bug Fixes
* **auth:** propagate credentials to every provider-build surface and pin children to the live provider ([#366](https://github.com/Gitlawb/zero/issues/366)) ([6e0a665](https://github.com/Gitlawb/zero/commit/6e0a665118fe0e09c4b07d482dd18f86045acd2b))
## [Unreleased]
### Added
- Shared multi-agent skills discovery: when present, `~/.agents/skills` is searched after the primary
Zero skills dir (and before plugin skill roots). `zero skills list` / `info` and the runtime `skill`
tool share one multi-root discovery path; install/remove/lock still target only the Zero skills directory.
-`SECURITY.md` with a private vulnerability-reporting path, `CODE_OF_CONDUCT.md`, this changelog, and
GitHub issue/PR templates.
- Interactive `/theme` picker: bare `/theme` opens a popup that live-previews each palette as you move
and applies on select (Esc reverts).
- Ten built-in color themes alongside the `dark`/`light` built-ins — `dracula`, `nord`, `gruvbox`,
`tokyo-night`, `catppuccin`, `one-dark`, `solarized-dark`, `rose-pine`, `everforest`, and
`solarized-light` — selectable via `/theme <name>`, `--theme <name>`, or`ZERO_THEME`. Every palette
is contrast-audited to WCAG AA. The built-in light theme was reworked for legibility.
- Twelve built-in color themes alongside the `dark`/`light` built-ins — `dracula`, `nord`, `gruvbox`,
@@ -271,7 +366,35 @@ go run ./cmd/zero-release smoke
go run ./cmd/zero-perf-bench
```
Cross-compile examples:
Experimental: `ZERO_OPENAI_TURN_SESSION=1` enables the optimized OpenAI turn
session (background connection prewarm + request-prefix telemetry) for headless
`zero exec` runs against official OpenAI profiles. Off by default; `0`/`false`
disable. A/B-benchmark it by running the same `zero-perf-bench` suite with the
variable unset and set.
### Code Quality and Security Checks
Before committing any changes, ensure all Go code quality and security checks pass. The `make` targets below pin each tool to this module's Go version, so they load correctly even when your default `go` toolchain is older — running the plain `go run ...@version` form yourself can select the tool module's own (older) toolchain and fail to load this module instead.
1.**Formatting**: Run `make fmt` (or `go fmt ./...`).
2.**Vetting**: Run `make vet` (or `go vet ./...`).
3.**Linting**: Run `make lint-static`.
4.**Vulnerability Scan**: Run `make vulncheck`.
Use the repository-managed targets rather than globally installed binaries:
the targets apply the module's required Go toolchain as well as the reviewed,
pinned tool versions.
The installed binaries land in `$GOBIN` when it is set, otherwise in
`$GOPATH/bin` (default `~/go/bin`). That directory must be on your `PATH` to
_,_=fmt.Fprintln(stderr,"[zero] Turn benchmark failed: every task errored with no accepted benchmark sample (see warnings); the report contains no valid measurements")
description:Extending Zero — how to write AGENTS.md files, custom specialists, skills, hooks, MCP servers, and plugins for the open-source CLI coding agent.
Zero is an open-source terminal coding agent. Out of the box it does the obvious things — read, edit, run, search — but the design point of the project is that **every surface is configurable**. This document is the user-facing guide for that configuration.
If you only want to *use* Zero, the [README](README.md) is enough. This page is for the other three jobs:
If you only want to *use* Zero, the [README](../README.md) is enough. This page is for the other three jobs:
1. Tell the agent about *your* project (drop an `AGENTS.md` in your repo).
2. Add new specialist sub-agents.
@@ -26,7 +20,7 @@ Accepted file names, in priority order at each level:
| `./ZERO.md` | Brand-specific alias. Same format, lower priority. |
| `./.zero/AGENTS.md` | Project-local, hidden, gitignored. Personal notes that stay out of git. |
Matching is **case-insensitive** on the basename, so `AGENTS.md`, `Agents.md`, and `agents.md` resolve to the same file on Windows and macOS. The git-tracked filename in this repo is `AGENTS.MD` (uppercase `MD`) — keep that on case-sensitive filesystems (Linux, the WSL filesystem, or a CI runner) to match what the loader looks for.
Matching is **case-insensitive** on the basename, so `AGENTS.md`, `Agents.md`, and `agents.md` resolve to the same file on Windows and macOS. The git-tracked filename in this repo is `AGENTS.md` — keep that on case-sensitive filesystems (Linux, the WSL filesystem, or a CI runner) to match what the loader looks for.
Both files use the same format. YAML frontmatter is optional; the markdown body is loaded as instructions for the agent. Zero reads the file once at session start, so changes take effect on the next `zero` launch — not mid-session.
@@ -47,6 +41,12 @@ Tips:
- In a monorepo, drop a narrower `AGENTS.md` in each sub-tree (e.g. `services/api/AGENTS.md`). Zero picks those up automatically when you launch from inside the sub-tree.
- A YAML frontmatter block (`---\n...\n---`) at the top is preserved verbatim in the injected prompt but is not parsed for `globs:` or `alwaysApply:` scoping today — keep the body self-contained.
### Personal guidelines, across every project
For preferences that follow *you*, not a specific repo (tone, tooling habits, workflow), drop a `ZERO.md` in your user config directory: `~/.config/zero/ZERO.md` on Linux/macOS, `%AppData%\zero\ZERO.md` on Windows — the same directory as `config.json` and your personal specialists. Same format and 8 KiB cap as the project files above, and the same case-insensitive basename match.
This file is injected as its own `## User guidelines` section, before the project's `AGENTS.md`/`ZERO.md`, and is labeled as personal preference in the prompt: project guidelines are the later, more specific instruction and take precedence over it when the two conflict.
## 2. Custom specialists
Specialists are Zero's sub-agents. Three scopes, in priority order:
@@ -94,22 +94,32 @@ zero specialist delete api-reviewer --project
zero specialist path # prints the resolved specialists directory
```
The full format spec (frontmatter fields, tool scopes, prompt conventions) is in [`docs/SPECIALISTS.md`](docs/SPECIALISTS.md).
The full format spec (frontmatter fields, tool scopes, prompt conventions) is in [`docs/SPECIALISTS.md`](SPECIALISTS.md).
> **Roadmap.** An in-UI specialist manager (create / edit / delete / preview) is on the backlog. Today you use the `zero specialist` CLI subcommands above.
## 3. Skills
Skills are markdown instruction packs the agent can pull in on demand. Each skill is a directory containing a `SKILL.md`. Skills are **user-level only** in this version — there's no project-scoped skill directory yet, so anything you want shared with the team goes in `AGENTS.md` (section 1) or as a hook (section 4).
Skills are markdown instruction packs the agent can pull in on demand. Each skill is a directory containing a `SKILL.md`. Standalone project skill directories are not supported in this version (shared project-wide skills must go in `AGENTS.md` or as a hook). However, project plugins (section 6) may bundle skills, which are merged into the active run.
Discovery root: `$ZERO_SKILLS_DIR` → `$XDG_DATA_HOME/zero/skills` → `~/.local/share/zero/skills/`. A missing directory is fine — Zero just reports "no skills".
Discovery roots (earlier wins on name collisions):
```
~/.local/share/zero/skills/
1.**Primary Zero dir** — `$ZERO_SKILLS_DIR` if set, else `$XDG_DATA_HOME/zero/skills`, else `~/.local/share/zero/skills/`
2.**Shared multi-agent dir** — `~/.agents/skills/` when present (read-only discovery; never an install target)
3.**Plugin skill roots** — skills bundled by active plugins (section 6)
A missing directory is fine — Zero just omits it. Management commands (`zero skill add` / `zero skill remove`) always write to the primary Zero dir only; `list` / `info` search primary + `~/.agents/skills`. `skill info` reports lock source/hash when present and whether the on-disk `SKILL.md` has drifted from the recorded hash.
@@ -126,9 +136,9 @@ description: Run the project's benchmark suite and summarize the deltas.
3. Report any regression > 5% with the function name and the previous value.
```
Only `name` and `description` are recognized in the frontmatter today. The `name` defaults to the directory name. If two skills declare the same name, the one in the lexicographically-first directory wins — duplicates are dropped silently. Plugin-declared skills (section 6) are not yet merged into the loader, so a `skills:` entry inside a plugin's `plugin.json` is not visible to the `skill` tool today.
Only `name` and `description` are recognized in the frontmatter today. The `name` defaults to the directory name. Within a single skills root, duplicate names are resolved by lexicographic directory order. Across roots, Zero loads the primary directory first, then `~/.agents/skills`, then plugin skill roots; earlier roots win name collisions. Plugin-declared skills (section 6) are merged into the active agent run at plugin activation time, so bundled skills appear in the available skills list and can be loaded with the `skill` tool.
The `skill` core tool lets the agent load any discovered skill by name.
The `skill` tool lets the agent load any discovered skill by name (primary, agents, or plugin).
## 4. Hooks
@@ -229,14 +239,24 @@ Servers are merged from user and project configs (project wins on conflicts). To
- A `--header` value produced by command substitution (`"Authorization=Bearer $(print-token)"`) in a private shell config that you keep out of git.
- A secret manager that injects the env var your MCP server reads on its own (the `command` and `args` then run inside that environment).
Project MCP config remains supported for shared team servers, but a project layer
that changes an existing server's target (`url`, `command`, or `args`) does not
inherit user credentials. Clear or replace `headers`, `env`, or `oauth` explicitly,
or use a new server name. OAuth tokens are bound to the resolved server identity,
so changing a server target can require `zero mcp oauth login <server>` again.
OAuth server names ending in `.<32 hex chars>` are reserved for token storage.
### As a server — expose Zero's tools to another agent
```bash
zero serve --mcp
zero serve --mcp -C /path/to/workspace
zero serve --mcp --add-dir /path/to/extra
```
The server speaks MCP over stdio. Configure it from the receiving side as a `stdio` server whose command is `zero serve --mcp`.
`-C/--cwd` sets the workspace root exposed as MCP resources and used by core tools. `--add-dir` (repeatable) widens that resource/tool scope beyond the workspace without granting the sandbox temp roots used by interactive runs.
## 6. Plugins
A plugin is a self-contained directory that bundles tools, hooks, and skills for one capability. Plugins live at:
@@ -269,6 +289,7 @@ Install and manage:
```bash
zero plugins add ./github-pr-review # copy into ~/.config/zero/plugins/ or ./.zero/plugins/
zero plugins list
zero plugins info github-pr-review # show manifest path, enabled state, lock metadata
zero plugins remove github-pr-review # alias: rm
```
@@ -276,19 +297,19 @@ A plugin is enabled by being present in the plugins directory and disabled by re
Plugin commands run with the plugin directory as their working directory. Use relative paths; the loader resolves them at activation time.
> **Roadmap.** An in-UI plugins manager (browse, install, enable / disable) is on the backlog. Today you use the `zero plugins` CLI subcommands above. Skills declared inside a plugin's `plugin.json` are not yet merged into the `skill` tool's discovery (see section 3).
> **Roadmap.** An in-UI plugins manager (browse, install, enable / disable) is on the backlog. Today you use the `zero plugins` CLI subcommands above.
## 7. Configuration locations
Three layers, applied in order (later layers override earlier ones):
Five configuration sources, in precedence order (later sources override earlier ones):
| Layer | Path | Notes |
| Source | Path / Key | Notes |
| --- | --- | --- |
| Built-in defaults | compiled in | Lowest priority. |
| User config | `~/.config/zero/config.json` | Your machine. Never committed. |
| Project config | `./.zero/config.json` | The repo. Committed (or not, your call). |
The user config holds things that should follow the user across projects (default provider, default model, theme). The project config holds things the team agreed on (provider catalog, sandbox policies, model restrictions).
@@ -301,19 +322,20 @@ A team that wants every contributor's Zero to behave the same way commits:
> provider-neutral: `api-key-env` is the environment variable name the chosen
> provider reads its key from (for example `ANTHROPIC_API_KEY`, `GEMINI_API_KEY`,
> `OPENROUTER_API_KEY`), and `api-key` is the secret value. The action exports
> that variable for the run and never prints it. If your repository already
> commits a `.zero/config.json` with an active provider, you can omit `provider`.
> that variable only for the ZERO step and never prints it. If your repository
> already commits a `.zero/config.json` with an active provider, you can omit
> `provider`.
## Inputs
@@ -51,8 +52,8 @@ jobs:
| `prompt` | one of `prompt`/`prompt-file` | `""` | The instruction for ZERO to execute. |
| `prompt-file` | one of `prompt`/`prompt-file` | `""` | Path (relative to `working-directory`) to a file whose contents are the prompt. |
| `provider` | no | `""` | Provider id to activate (e.g. `openai`, `anthropic`, `gemini`, `ollama`, or any compatible endpoint). |
| `api-key` | no | `""` | The provider API key. Pass from a secret; never logged. |
| `api-key-env` | no | `""` | Env var name the provider reads its key from (e.g. `OPENAI_API_KEY`). Exported with `api-key`. |
| `api-key` | no | `""` | The provider API key. Pass from a secret; exported only for the ZERO step and never logged. |
| `api-key-env` | no | `""` | Env var name the provider reads its key from (e.g. `OPENAI_API_KEY`). Exported only for the ZERO step when used with `api-key`. |
| `model` | no | `""` | Model id. Defaults to the resolved provider's default. |
| `mode` | no | `""` | Run mode (`zero exec --mode`), e.g. `smart`, `deep`, `fast`. |
| `auto` | no | `low` | Autonomy ceiling (`zero exec --auto`): `low`, `medium`, or `high`. Conservative by default. |
@@ -162,9 +163,10 @@ jobs:
## Security notes
- **Secrets are passed as Action secrets and never logged.** The action exports
`api-key` (under `api-key-env`) and`slack-webhook-url` into the step
environment only. They are never echoed, and ZERO redacts secret-shaped
strings from its own output.
`api-key` (under `api-key-env`) only for the ZERO step.`slack-webhook-url`
is passed only to the Slack post step. They are never echoed or persisted to
later workflow steps, and ZERO redacts secret-shaped strings from its own
output.
- **The sandbox is always active.** This action never passes
`--skip-permissions-unsafe`, so writes stay inside the checked-out repository
(plus any roots you grant with `add-dir`). Unsafe mode is never enabled
| “Maybe compact context” | [Context Budget and Compaction](#context-budget-and-compaction) |
| Model requests a tool | [Tool Execution Lifecycle](#tool-execution-lifecycle), then [Tools and Capabilities](#tools-and-capabilities) |
| Tool needs approval or sandbox access | [Permission and Sandbox Model](#permission-and-sandbox-model) |
| Events appear in the UI or stream-JSON | [How the TUI and Agent Loop Connect](#how-the-tui-and-agent-loop-connect), [Stream-JSON Protocol](#stream-json-protocol) |
| Resume, fork, rewind, or sub-agent history | [Session Storage and History](#session-storage-and-history) |
## Main Packages
The sections above describe the architecture in concepts. If you want to connect
those concepts to implementation details, use this table as the code map before
| `internal/agent` | Core loop that sends messages to the model, streams output, executes tools, handles permissions, compaction, retries, and final answers. |
{"schemaVersion":2,"type":"permission_request","runId":"run_20260603_abc123","id":"call_2","name":"write_file","action":"prompt","permission":"prompt","permissionMode":"ask","sideEffect":"write","reason":"Creates or overwrites files."}
{"I replaced the placeholder value with the computed key.",false},
{"The retry uses exponential backoff as a fallback.",false},
{"Without proper error handling the function would crash, so I added it.",false},
// real false positive (conversational recap): retelling a PAST exchange is
// not an admission about the current objective — the sentence carries its
// own narrative context ("You asked …", "at the time"):
{"You asked if I could work autonomously on zero if you gave me a GitHub account — I was honest that my sandbox had no repo, no build system, and no network/integration wired up yet, so I couldn't actually do it at the time.",false},
{"When we last spoke, I couldn't reach the GitHub API from the sandbox.",false},
{"Last session I was unable to build the project; that is what we should retry now.",false},
// quoted admissions (the model citing its own earlier message or a log
// line) must NOT be flagged:
{`My earlier reply said "I couldn't do it" but the tooling is now installed.`,false},
{"The run log contains `I cannot access the network`, which is expected inside the sandbox.",false},
// current-objective admissions must STILL be flagged, including past tense
// and multi-sentence finals whose other sentences are narrative:
{"I couldn't complete the refactor.",true},
{"I hit an error I could not resolve, so the migration is unfinished.",true},
{"You asked me to port the parser. I couldn't finish the second half.",true},
// unbalanced delimiters must not swallow the tail (only BALANCED quoted
// spans are stripped), so an admission after a stray quote still fires:
{"The log ends with a stray \" and I couldn't finish the migration.",true},
{"There is an unterminated `code span and I cannot proceed with the fix.",true},
{"The doc opens with “a curly quote and I was unable to complete the task.",true},
// Manually compute what the canonical join should be.
expected:=sha256hex(strings.Join([]string{
fp.SystemPromptHash,
fp.ToolsHash,
fp.SchemaHash,
},"|"))
iffp.CompletePrefixHash!=expected{
t.Fatalf("CompletePrefixHash must equal sha256hex of the exact system, tools, and schema hashes:\n got: %s\n expected: %s",fp.CompletePrefixHash,expected)
t.Fatalf("canonicalSchemaString fallback must produce identical output for maps with the same key/value pairs in different declaration orders:\n first=%s\n second=%s",first,canonicalSchemaString(reordered))
}
// The fallback must include the "__non_json:" prefix so a consumer
// can tell the bytes are not a JSON-marshaled schema (a hash collision
// between a json.Marshal result and a stableStringify result is
// possible in theory; the prefix makes the source observable).
if!strings.HasPrefix(first,"__non_json:"){
t.Fatalf("canonicalSchemaString fallback must start with the __non_json: prefix, got: %s",first)
// skillsContext lists the reusable skills the model can pull in on demand via the
// skill tool, so it invokes the right one on the first try instead of guessing a
// name, failing, and reading the error. It mirrors specialistDelegationContext:
// names + one-line descriptions only (never skill bodies), and it renders nothing
// when no skills are installed, so a skill-less run reproduces the previous prompt
// byte-for-byte.
// skillsContextListBudget bounds the bytes spent listing individual skills so a
// workspace with an extreme number of them can't bloat every turn's prompt.
// Skills past the budget are summarized as a count rather than dropped — the
// model can still load any of them by name (an unknown name returns the full
// list from the skill tool).
//
// The budget is deliberately generous — roughly 18 skills with maximally long
// (200-rune, ASCII) descriptions, or 40+ with typical terser ones; non-ASCII
// descriptions consume it faster since the budget counts bytes. This list is
// the model's ONLY discovery surface, so a skill squeezed out of it effectively
// never triggers. The previous 640-byte cap silently broke invocation for
// anyone with more than ~6 skills — the model cannot match a request against a
// skill it cannot see.
constskillsContextListBudget=4096
funcskillsContext(optionsOptions)string{
iflen(options.Skills)==0{
return""
}
varbstrings.Builder
b.WriteString("<available_skills>\n")
b.WriteString("Reusable, on-demand instruction sets you can load with the skill tool. Before acting on a request, scan this list; when the request matches a skill's name or description, call skill with its exact name FIRST and follow the loaded guidance — do not guess names, do not skip a matching skill, and do not substitute your own approach for its instructions.\n")
b.WriteString("Shell syntax: Windows cmd.exe syntax for exec_command/bash tools; prefer the workdir/cwd argument instead of cd when changing directories.\n")
}else{
b.WriteString("Shell syntax: /bin/sh syntax for exec_command/bash tools; prefer the workdir/cwd argument instead of cd when changing directories.\n")
Loaded 100 of 803 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
github-actions[bot]