Update to bsnes v021 release.

This is a maintainence release. I am mostly releasing this for the sake of the recently released Der Langrisser translation.
Changelog:
Windows port can once again map joypads through the Input Configuration panel
Using enter or spacebar to assign a key should no longer instantly map those keys
F11 now toggles fullscreen mode
Esc now toggles menu on and off (use F11+Esc combined to hide UI completely)
Fixed a bug in King of Dragons (J, U, E), KOFF was not cleared during S-DSP power(), thanks to FitzRoy for the report, and blargg for assistance fixing the bug
Fixed serious crashing error with File->Load on Linux/amd64 port
Hopefully fixed min/max undefined error on GCC 4.2.0, but I am unable to test to verify
Fixed many cast const char* to char* warnings for GCC 4.2.0, but some probably remain, as again, I am unable to test as I lack GCC 4.2.0
Set XV_AUTO_COLORKEY to 1 for Video/Xv renderer. Should fix some video drivers where there was no output, especially after running mplayer, etc. Thanks to sinimas for the fix
Added clear_video() to Video/Xv renderer. Green edges at the bottom and right sides of the video output are now gone, and unloading a ROM will clear video
I have finally figured out how to poll the keyboard status in real-time through Xorg: the XQueryKeymap function. I will be rewriting the Linux key capture system to use this, instead of capturing window key up / down messages through GTK+. This will finally allow me to completely abstract the UI from the hardware video, audio and input interfaces: a necessary step toward Linux joypad support.

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,27 +0,0 @@
----
-name: Bug report
-about: Report a bug *not* relating to game compatibility
-title: ''
-labels: ''
-assignees: ''
-
----
-
-**Describe the bug**
-A clear and concise description of what the bug is.
-
-**To Reproduce**
-Steps to reproduce the behavior:
-1. Go to '...'
-2. Click on '....'
-3. Scroll down to '....'
-4. See error
-
-**Expected behavior**
-A clear and concise description of what you expected to happen.
-
-**Screenshots**
-If applicable, add screenshots to help explain your problem.
-
-**Additional context**
-Add any other context about the problem here.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -1,20 +0,0 @@
----
-name: Feature request
-about: Suggest an idea for this project
-title: ''
-labels: ''
-assignees: ''
-
----
-
-**Is your feature request related to a problem? Please describe.**
-A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
-
-**Describe the solution you'd like**
-A clear and concise description of what you want to happen.
-
-**Describe alternatives you've considered**
-A clear and concise description of any alternative solutions or features you've considered.
-
-**Additional context**
-Add any other context or screenshots about the feature request here.

.github/ISSUE_TEMPLATE/game-issue-report.md

@@ -1,22 +0,0 @@
----
-name: Game Issue Report
-about: Report an issue running a specific game in ares
-title: "[system] Game"
-labels: bug
-assignees: ''
-
----
-
-Before submitting an issue, please use the search to make sure an issue doesn't already exist, you should also make sure your rom is not a bad dump, by comparing against the hashes in the No-Intro (Cartridges) or Redump (CD-ROM) databases.
-
-**Describe the issue**
-A clear and concise description of what the bug is.
-
-**Rom Information**
-Specify the impacted rom filename and any associated hashes (sha256 preferred);.
-The easiest way to do this is to open the game in ares, and go to "Tools -> Manifest" and copy/paste the contents.
-
-```
-file: Some Game (REGION).ext
-sha256: <hash>
-```

.github/workflows/build.yml

@@ -1,298 +0,0 @@
-name: Build
-on:
-  push:
-    branches: [ master ]
-    tags: [ 'v*' ]
-  pull_request:
-    branches: [ master ]
-jobs:
-  build:
-    strategy:
-      fail-fast: false
-      matrix:
-        program:
-        - ares
-        platform:
-        - name: windows
-          os: windows-latest
-          compiler: clang++
-          windres: windres
-          shell: 'msys2 {0}'
-          msystem: clang64
-          install: mingw-w64-clang-x86_64-clang mingw-w64-clang-x86_64-pkgconf mingw-w64-clang-x86_64-SDL2
-        - name: windows-arm64
-          os: windows-latest
-          compiler: clang++ --target=aarch64-w64-windows-gnu --sysroot=/clangarm64 -resource-dir=/clangarm64/lib/clang/$(basename "$(clang++ -print-resource-dir)")
-          windres: windres --target=aarch64-w64-windows-gnu
-          shell: 'msys2 {0}'
-          msystem: clang64
-          install: mingw-w64-clang-x86_64-clang mingw-w64-clang-aarch64-clang mingw-w64-clang-aarch64-pkgconf mingw-w64-clang-aarch64-SDL2
-        - name: windows-msvc-x64
-          os: windows-latest
-          compiler: clang++
-          windres: llvm-rc
-          shell: bash
-          msvc-arch: x64
-        - name: windows-msvc-arm64
-          os: windows-latest
-          compiler: clang++ --target=aarch64-w64-windows-msvc
-          windres: llvm-rc
-          shell: bash
-          msvc-arch: x64_arm64
-        - name: windows-cl-x64
-          os: windows-latest
-          compiler: cl
-          windres: rc
-          shell: bash
-          msvc-arch: x64
-        - name: windows-cl-arm64
-          os: windows-latest
-          compiler: cl
-          windres: rc
-          shell: bash
-          msvc-arch: x64_arm64
-        - name: macos
-          os: macos-latest
-          compiler: clang++
-          shell: sh
-        - name: ubuntu
-          os: ubuntu-latest
-          compiler: g++
-          shell: sh
-    name: ${{ matrix.program }}-${{ matrix.platform.name }}
-    runs-on: ${{ matrix.platform.os }}
-    defaults:
-      run:
-        shell: ${{ matrix.platform.shell }}
-    steps:
-    - name: Install MSYS2 Dependencies
-      if: matrix.platform.shell == 'msys2 {0}'
-      uses: msys2/setup-msys2@v2
-      with:
-        msystem: ${{ matrix.platform.msystem }}
-        install: make ${{ matrix.platform.install }}
-    - name: Install Linux Dependencies
-      if: runner.os == 'Linux'
-      run: |
-        sudo apt-get update -y -qq
-        sudo apt-get install libsdl2-dev libgtk-3-dev libao-dev libopenal-dev
-    - name: "macOS: Import Certificate"
-      if: runner.os == 'macOS' && github.event_name != 'pull_request'
-      continue-on-error: ${{ github.repository != 'ares-emulator/ares' }}
-      uses: wpilibsuite/import-signing-certificate@2ac4f44d28045073d23153256efbb4c4b2d8aa22    # Don't use rolling branch for security reasons
-      with:
-        certificate-data: ${{ secrets.MACOS_CERTIFICATE_DATA }}
-        certificate-passphrase: ${{ secrets.MACOS_CERTIFICATE_PASSPHRASE }}
-        keychain-name: ares-macos-keychain
-        keychain-password: ${{ secrets.MACOS_KEYCHAIN_PASSWORD }}
-    - name: Checkout source code
-      uses: actions/checkout@v2
-    - name: "macOS: recover MoltenVK cache"
-      if: runner.os == 'macOS'
-      uses: actions/cache@v3
-      env:
-          cache-name: moltenvk
-      with:
-          path: thirdparty/MoltenVK/MoltenVK
-          key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ hashFiles('thirdparty/MoltenVK/HEAD') }}
-    - name: "macOS: recover SDL cache"
-      if: runner.os == 'macOS'
-      uses: actions/cache@v3
-      env:
-          cache-name: sdl
-      with:
-          path: thirdparty/SDL/SDL
-          key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ hashFiles('thirdparty/SDL/HEAD') }}
-    - name: Install macOS Dependencies
-      if: runner.os == 'macOS'
-      run: |
-        brew install make ninja cmake
-        pip install --no-input setuptools
-        echo "MAKE=gmake" >> $GITHUB_ENV
-        pushd thirdparty/SDL
-        ./build-SDL.sh
-        popd
-        pushd thirdparty/MoltenVK
-        ./build-moltenvk.sh
-        popd
-    - name: Set up MSVC environment
-      if: matrix.platform.msvc-arch != ''
-      uses: ilammy/msvc-dev-cmd@v1
-      with:
-        arch: ${{ matrix.platform.msvc-arch }}
-    - name: Make
-      if: runner.os != 'macOS'
-      run: ${MAKE:-make} -j4 -C desktop-ui build=optimized local=false compiler="${{ matrix.platform.compiler }}" windres="${{ matrix.platform.windres }}"
-    - name: "macOS: Make universal app"
-      if: runner.os == 'macOS'
-      run: scripts/macos-make-universal.sh build=optimized local=false
-      env:
-        MAKEFLAGS: -j3
-        MACOS_CERTIFICATE_NAME: ${{ secrets.MACOS_CERTIFICATE_NAME }}
-        MACOS_KEYCHAIN_NAME: ares-macos-keychain
-        MACOS_KEYCHAIN_PASSWORD: ${{ secrets.MACOS_KEYCHAIN_PASSWORD }}
-    - name: "Windows: sign"
-      if: runner.os == 'Windows' && github.event_name != 'pull_request'
-      uses: DanaBear/code-sign-action@98c79121b376beab8d6a9484f445089db4461bca
-      with:
-        certificate: '${{ secrets.WIN_CERTIFICATE }}'
-        password: '${{ secrets.WIN_PASSWORD }}'
-        certificatesha1: '${{ secrets.WIN_CERTHASH }}'
-        certificatename: '${{ secrets.WIN_CERTNAME }}'
-        folder: 'desktop-ui/out'
-        timestampUrl: 'http://timestamp.digicert.com' 
-    - name: "macOS: notarize"
-      if: runner.os == 'macOS' && github.event_name != 'pull_request'
-      continue-on-error: ${{ github.repository != 'ares-emulator/ares' }}
-      run: |
-        ditto -c -k --keepParent desktop-ui/out/ares.app /tmp/ares.zip
-        xcrun notarytool submit /tmp/ares.zip --apple-id "$MACOS_NOTARIZATION_USERNAME" --password "$MACOS_NOTARIZATION_PASSWORD" --team-id "$MACOS_NOTARIZATION_TEAMID" --wait
-        xcrun stapler staple desktop-ui/out/ares.app
-      env:
-        MACOS_NOTARIZATION_USERNAME: ${{ secrets.MACOS_NOTARIZATION_USERNAME }}
-        MACOS_NOTARIZATION_PASSWORD: ${{ secrets.MACOS_NOTARIZATION_PASSWORD }}
-        MACOS_NOTARIZATION_TEAMID: ${{ secrets.MACOS_NOTARIZATION_TEAMID }}
-    - name: Upload
-      uses: actions/upload-artifact@v2
-      with:
-        name: ${{ matrix.program }}-${{ matrix.platform.name }}
-        path: desktop-ui/out/*
-
-     
-  release:
-    if: github.ref == 'refs/heads/master' || startsWith(github.ref, 'refs/tags/')
-    runs-on: ubuntu-latest
-    needs:
-    - build
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        path: 'src'
-    - name: Download Artifacts
-      uses: actions/download-artifact@v2
-      with:
-        path: 'bin'
-    - name: Package Artifacts
-      run: |
-        set -eu
-        case ${GITHUB_REF} in
-          refs/tags/*) suffix="-${GITHUB_REF#refs/tags/}" ;;
-          refs/heads/master) suffix="-nightly" ;;
-          *) suffix="" ;;
-        esac
-
-        srcdir="${GITHUB_WORKSPACE}/src"
-        bindir="${GITHUB_WORKSPACE}/bin"
-
-        # Hack: Workaround for GitHub artifacts losing attributes.
-        chmod +x ${bindir}/ares-macos/ares.app/Contents/MacOS/ares
-
-        for package in windows windows-msvc-arm64 macos
-        do
-          mkdir "${package}"
-          cd "${package}"
-
-          # Package ares.
-          outdir=ares${suffix}
-          mkdir ${outdir}
-          cp -ar ${bindir}/ares-${package}/* ${outdir}
-          zip -r ../ares-${package}.zip ${outdir}
-
-          cd -
-        done
-    - name: Create Release
-      id: release
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      run: |
-        set -eu
-        github_rest()
-        {
-          local method="${1}"
-          local url="https://api.github.com${2}"
-          shift 2
-          >&2 echo "${method} ${url}"
-          curl \
-            --fail \
-            -H "Accept: application/vnd.github.v3+json" \
-            -H "Authorization: token ${GITHUB_TOKEN}" \
-            -X "${method}" \
-            "${url}" \
-            "$@"
-        }
-        github_get_release_id_for_tag()
-        {
-          payload=$(github_rest GET "/repos/${GITHUB_REPOSITORY}/releases/tags/${1}") || return
-          echo "${payload}" | jq .id
-        }
-        github_delete_release_by_id()
-        {
-          github_rest DELETE "/repos/${GITHUB_REPOSITORY}/releases/${1}"
-        }
-        github_create_release()
-        {
-          local payload="{
-            \"tag_name\": \"${1}\",
-            \"target_commitish\": \"${2}\",
-            \"name\": \"${3}\",
-            \"body\": \"${4}\",
-            \"draft\": ${5},
-            \"prerelease\": ${6}
-          }"
-          github_rest POST "/repos/${GITHUB_REPOSITORY}/releases" -d "${payload}"
-        }
-        make_nightly_release()
-        {
-          github_create_release \
-            nightly \
-            "${GITHUB_SHA}" \
-            "ares nightly $(date +"%Y-%m-%d")" \
-            "Auto-generated nightly release on $(date -u +"%Y-%m-%d %T %Z")" \
-            false \
-            true
-        }
-        make_version_release()
-        {
-          github_create_release \
-            "${1}" \
-            "${GITHUB_SHA}" \
-            "ares ${1}" \
-            "This is ares ${1}, released on $(date +"%Y-%m-%d")." \
-            false \
-            false
-        }
-        case ${GITHUB_REF} in
-          refs/tags/*)
-            # Create a new version release using the current revision.
-            echo "UPLOAD_URL=$(make_version_release ${GITHUB_REF#refs/tags/} | jq -r .upload_url)" >> $GITHUB_ENV
-            ;;
-          refs/heads/master)
-            # Check for an existing nightly release.
-            { release_id=$(github_get_release_id_for_tag nightly); status=$?; } || true
-            # Delete existing nightly release if it exists.
-            case ${status} in
-              0) github_delete_release_by_id "${release_id}" ;;
-              22) >&2 echo "No current nightly release; skipping tag deletion." ;;
-              *) >&2 echo "API call failed unexpectedly." && exit 1 ;;
-            esac
-            # Create a new nightly release using the current revision.
-            echo "UPLOAD_URL=$(make_nightly_release | jq -r .upload_url)" >> $GITHUB_ENV
-            ;;
-        esac
-    - name: Upload ares-windows
-      uses: actions/upload-release-asset@v1
-      env: { GITHUB_TOKEN: '${{ secrets.GITHUB_TOKEN }}' }
-      with: { upload_url: '${{ env.UPLOAD_URL }}', asset_path: 'ares-windows.zip', asset_name: 'ares-windows.zip', asset_content_type: 'application/zip' }
-    - name: Upload ares-windows-msvc-arm64
-      uses: actions/upload-release-asset@v1
-      env: { GITHUB_TOKEN: '${{ secrets.GITHUB_TOKEN }}' }
-      with: { upload_url: '${{ env.UPLOAD_URL }}', asset_path: 'ares-windows-msvc-arm64.zip', asset_name: 'ares-windows-msvc-arm64.zip', asset_content_type: 'application/zip' }      
-    - name: Upload ares-macos
-      uses: actions/upload-release-asset@v1
-      env: { GITHUB_TOKEN: '${{ secrets.GITHUB_TOKEN }}' }
-      with: { upload_url: '${{ env.UPLOAD_URL }}', asset_path: 'ares-macos.zip', asset_name: 'ares-macos.zip', asset_content_type: 'application/zip' }
-#  - name: Upload ares-ubuntu
-#      uses: actions/upload-release-asset@v1
-#      env: { GITHUB_TOKEN: '${{ secrets.GITHUB_TOKEN }}' }
-#      with: { upload_url: '${{ env.UPLOAD_URL }}', asset_path: 'ares-ubuntu.zip', asset_name: 'ares-ubuntu.zip', asset_content_type: 'application/zip' }
-

.gitignore

@@ -1,12 +0,0 @@
-*.moc
-*.user
-.vs/
-.vscode/
-.idea/
-cmake-*/
-obj/
-out/
-obj-amd64/
-obj-arm64/
-out-amd64/
-out-arm64/

GNUmakefile

@@ -1,6 +0,0 @@
-targets = all clean install uninstall verbose
-
-$(targets):
-	@$(MAKE) -C desktop-ui $@
-
-.PHONY: $(targets)

LICENSE

@@ -1,472 +0,0 @@
-----------------------------------------------------------------------
-ares
-
-Copyright (c) 2004-2021 ares team, Near et al
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-Stack-less Just-In-Time compiler
-
-Copyright Zoltan Herczeg ([email protected]). All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS
-``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-libchdr
-
-Copyright Romain Tisserand
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in the
-      documentation and/or other materials provided with the distribution.
-    * Neither the name of the <organization> nor the
-      names of its contributors may be used to endorse or promote products
-      derived from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
-DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-LZMA SDK is placed in the public domain.
-
-Anyone is free to copy, modify, publish, use, compile, sell, or distribute
-the original LZMA SDK code, either in source code form or as a compiled binary,
-for any purpose, commercial or non-commercial, and by any means.
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-zlib
-
- (C) 1995-2017 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  [email protected]          [email protected]
-
-If you use the zlib library in a product, we would appreciate *not* receiving
-lengthy legal documents to sign.  The sources are provided for free but without
-warranty of any kind.  The library has been entirely written by Jean-loup
-Gailly and Mark Adler; it does not include third-party code.
-
-If you redistribute modified sources, we would appreciate that you include in
-the file ChangeLog history information documenting your changes.  Please read
-the FAQ for more information on the distribution of modified source versions.
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-
-xxHash - Extremely Fast Hash algorithm
-Header File
-Copyright (C) 2012-2021 Yann Collet
-
-BSD 2-Clause License (https://www.opensource.org/licenses/bsd-license.php)
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-* Redistributions of source code must retain the above copyright
-  notice, this list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above
-  copyright notice, this list of conditions and the following disclaimer
-  in the documentation and/or other materials provided with the
-  distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-You can contact the author at:
-- xxHash homepage: https://www.xxhash.com
-- xxHash source repository: https://github.com/Cyan4973/xxHash
-
-----------------------------------------------------------------------
-
-MoltenVK
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
-   
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-OpenGL API and Extension Registry
-https://github.com/KhronosGroup/OpenGL-Registry
-
-Copyright 2013-2020 The Khronos Group Inc.
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and/or associated documentation files (the
-"Materials"), to deal in the Materials without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Materials, and to
-permit persons to whom the Materials are furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Materials.
-
-THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
-CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-EGL API and Extension Registry
-https://github.com/KhronosGroup/EGL-Registry
-
-Copyright (c) 2008-2018 The Khronos Group Inc.
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and/or associated documentation files (the
-"Materials"), to deal in the Materials without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Materials, and to
-permit persons to whom the Materials are furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Materials.
-
-THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
-CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-TZXFile
-
-MIT License
-
-Copyright (c) 2020 MrReeMachine
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-ymfm
-
-BSD 3-Clause License
-
-Copyright (c) 2021, Aaron Giles
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-----------------------------------------------------------------------
-

README.md

@@ -1,152 +0,0 @@
-![ares logo](https://github.com/ares-emulator/ares/blob/master/ares/ares/resource/logo.png)
-
-[![License: ISC](https://img.shields.io/badge/License-ISC-blue.svg)](https://github.com/higan-emu/ares/blob/master/LICENSE)
-
-**ares** is a multi-system emulator that began development on October 14th, 2004.
-It is a descendant of [higan](https://github.com/higan-emu/higan) and [bsnes](https://github.com/bsnes-emu/bsnes/), and focuses on accuracy and preservation.
-
-Official Releases
------------------
-
-Official releases are available from
-[the ares website](https://ares-emu.net).
-
-Nightly Builds
---------------
-
-Automated, untested builds of ares are available for Windows and macOS as a [pre-release](https://github.com/higan-emu/ares/releases/tag/nightly). 
-Only the latest nightly build is kept.
-
-Prerequisites
--------------
-
-### *nix building
-
-###### Minimum required packages:
-```
-g++ make pkg-config libgtk-3-dev libcanberra-gtk-module libgl-dev libasound2-dev
-```  
-###### Additional Audio Drivers
-ares supports additional audio drivers besides the ALSA drivers included above. Installing these additional packages will allow them to be selected in Settings > Drivers:  
-`libao-dev libopenal-dev'
-
-###### GTK2 & GTK3
-By default, GTK3 is used, but support for GTK2 is available. You will need to install the additional package `libgtk2.0-dev` as well as specifying the command line option `hiro=gtk2` at compile time.
-
-###### SDL2 for input
-If you would like to use SDL for input (e.g. for using a controller), you will need to install the `libsdl2-dev` and `libsdl2-2.0-0` packages and perform a clean build of ares.
-You should then be able to select SDL for input in the Settings > Drivers menu.
-
-##### Building with clang
-
-clang++ is now the preferred compiler for ares. If clang is detected on Windows/macOS/BSD, it will be selected by default. On Linux and other platforms, g++ remains the default if present. To build with clang, it is necessary to install both the `clang` and `lld` packages. If you would like to manually specify a compiler, you can use the following option: `compiler=[g++|clang++]`  
-  
---------------
-
-### Windows building
-
-To build on Windows, using MSYS2 is recommended which can be download [here](https://www.msys2.org/). Follow the instructions
-on this page to install and setup an appropriate MINGW64 environment. Running the command:  
-```
-pacman -S --needed base-devel mingw-w64-x86_64-toolchain mingw-w64-x86_64-SDL2
-```  
-from the MSYS2 MSYS terminal should setup everything you need to compile ares. Note that in order to compile, you will want to be in a MINGW64 terminal window after install and setup is complete. 
-
-##### Building with clang
-
-clang is available through Visual Studio (or Build Tools for Visual Studio) through its installer and can be used to build ares. You will still need to supply GNU make in this instance. MSYS2 also offers a clang environment. You will want to make sure you select the clangw64 option during installation of MSYS2 which should provide and additional CLANG64 pre-configured environment. Install the clang toolchain package from the MSYS2 terminal:  
-```
-pacman -S mingw-w64-clang-x86_64-toolchain mingw-w64-clang-x86_64-SDL2
-```  
-Once complete, open a CLANG64 terminal window and proceed with building ares. 
-
-###### Debug Symbols
-When building with clang, by default symbols will be generated for debug builds using an MSVC compatible format (CodeView) for use with Windows debugging tools. In order to generate GDB compatible symbols, specify the following option: `symformat=gdb`  
-
-Compilation
------------
-
-Check out the source code by running this command:
-
-```
-git clone https://github.com/ares-emulator/ares.git
-```
-
-From the root of the project directory run:
-
-```
-make -j4
-```
- 
-`-j#` indicates number of parallel build processes, and shouldn't be set higher than N-1 cores on your processor.  Specifying this option can significantly decrease the time to build this project. There are multiple build types available and it defaults to an 'optimized' build. Build types can be specified using: `build=[debug|stable|release|minified|optimized]`  
-
-Build options can be found in the following two make files: nall/GNUmakefile desktop-ui/GNUmakefile
-
-To start compilation from the beginning, run the following prior to compiling:
-
-```
-make clean
-```
-
-#### Building specific cores  
-If you would like to build a subset of cores, you can specify the `cores="core1 core2"` option. Currently available cores:  
-```
-a26 fc sfc n64 sg ms md ps1 pce ng msx cv myvision gb gba ws ngp spec
-```  
-
-Build Output
-------------
-
-There is a single binary produced at the end of compilation which can be found in `desktop-ui/out`. On OS's besides Linux, the `Database` & `Shader` directories are copied over here as well. On Linux, running `make install` after compilation will copy these directories and binary into suitable locations (see desktop-ui/GNUmakefile for details). Alternatively, these directories can be copied from `ares/Shaders/*` and `mia/Database/*`.
-
-
-Command-line options
---------------------
-
-When started from the command-line, ares accepts a few options.
-
-```
-Usage: ./ares [options] game(s)
-
-  --help                 Displays available options and exit
-  --fullscreen           Start in full screen mode
-  --system system        Specify the system name
-  --shader shader        Specify GLSL shader name to load (requires OpenGL driver)
-  --setting name=value   Specify a value for a setting
-  --dump-all-settings    Show a list of all existing settings and exit
-  --no-file-prompt       Do not prompt to load (optional) additional roms (eg: 64DD)
-```
-
-The --system option is useful when the system type cannot be auto-detected.
---fullscreen will only have an effect if a game is also passed in argument.
-
-Example:
-`ares --system MSX examples.rom --fullscreen`
-
-Specifying multiple games allows for multi-cart support.  For example, to load
-the Super GameBoy BIOS and a game in one command (to avoid a file prompt), you 
-can do:
-
-`ares "Super GameBoy.sfc" "Super Mario Land.gb"`
-
-The --no-file-prompt option is useful if you wish to launch a game from CLI
-without being prompted to load additional roms. For example, some Nintendo 64 
-games optionally support 64DD expansion disks, so this option can be used to
-suppress the "64DD Disk" file dialog, and assume any secondary content is 
-disconnected.
-
-High-level Components
----------------------
-
-* __ares__:       emulator cores and component implementations
-* __desktop-ui__: main GUI implementation for this project
-* __hiro__:       cross-platform GUI toolkit that utilizes native APIs on supported platforms
-* __nall__:       Near's alternative to the C++ standard library
-* __ruby__:       interface between a hiro application and platform-specific APIs for emulator video, audio, and input
-* __mia__:        internal ROM database and ROM/image loader
-* __libco__:      cooperative multithreading library
-
-Contributing
-------------
-
-Please join our discord to chat with other ares developers: https://discord.com/invite/gz2quhk2kv

ares/GNUmakefile

@@ -1,108 +0,0 @@
-ifeq ($(platform),windows)
-  options += $(call lib,uuid kernel32 user32 gdi32 comctl32 comdlg32 shell32)
-else ifeq ($(platform),macos)
-else ifneq ($(filter $(platform),linux bsd),)
-  options += -Wl,-export-dynamic
-  options += -lX11 -lXext
-else
-  $(error "ares is a library and cannot be built directly.")
-endif
-
-ares.objects := ares ares-fixed-allocator
-
-$(object.path)/ares.o: $(ares.path)/ares/ares.cpp
-$(object.path)/ares-fixed-allocator.o: $(ares.path)/ares/memory/fixed-allocator.cpp
-
-ifeq ($(vulkan),true)
-  flags += -DVULKAN
-endif
-
-ifeq ($(profile),accuracy)
-  flags += -DPROFILE_ACCURACY
-endif
-
-ifeq ($(profile),performance)
-  flags += -DPROFILE_PERFORMANCE
-endif
-
-ifneq ($(filter $(cores),a26),)
-  include $(ares.path)/a26/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),fc),)
-  include $(ares.path)/fc/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),sfc),)
-  include $(ares.path)/sfc/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),n64),)
-  include $(ares.path)/n64/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),sg),)
-  include $(ares.path)/sg/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),ms),)
-  include $(ares.path)/ms/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),md),)
-  include $(ares.path)/md/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),saturn),)
-  include $(ares.path)/saturn/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),ps1),)
-  include $(ares.path)/ps1/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),pce),)
-  include $(ares.path)/pce/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),msx),)
-  include $(ares.path)/msx/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),cv),)
-  include $(ares.path)/cv/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),myvision),)
-  include $(ares.path)/myvision/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),gb),)
-  include $(ares.path)/gb/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),gba),)
-  include $(ares.path)/gba/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),ws),)
-  include $(ares.path)/ws/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),ng),)
-  include $(ares.path)/ng/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),ngp),)
-  include $(ares.path)/ngp/GNUmakefile
-endif
-
-ifneq ($(filter $(cores),spec),)
-  include $(ares.path)/spec/GNUmakefile
-endif
-
-include $(ares.path)/component/GNUmakefile
-
-flags += $(foreach c,$(call strupper,$(cores)),-DCORE_$c)
-
-ares.objects := $(ares.objects:%=$(object.path)/%.o)

ares/Shaders/AANN.shader/AANN.fs

@@ -1,81 +0,0 @@
-#version 150
-
-//anti-aliased nearest-neighbor
-
-precision highp float;
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-uniform vec4 targetSize[];
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-vec4 vpow(vec4 n, float e) {
-  return vec4(pow(n.x, e), pow(n.y, e), pow(n.z, e), pow(n.w, e));
-}
-
-vec4 toLQV(vec3 c) {
-  return vec4(c.r, c.g, c.b, c.r * 0.2989 + c.g * 0.5870 + c.b * 0.1140);
-}
-
-vec3 fromLQV(vec4 c) {
-  float f = c.w / (c.r * 0.2989 + c.g * 0.5870 + c.b * 0.1140);
-  return vec3(c.rgb) * f;
-}
-
-vec3 percent(float ssize, float tsize, float coord) {
-  float minfull  = (coord * tsize - 0.5) / tsize * ssize;
-  float maxfull  = (coord * tsize + 0.5) / tsize * ssize;
-  float realfull = floor(maxfull);
-
-  if(minfull > realfull) {
-    return vec3(
-      1,
-      (realfull + 0.5) / ssize,
-      (realfull + 0.5) / ssize
-    );
-  }
-
-  return vec3(
-    (maxfull - realfull) / (maxfull - minfull),
-    (realfull - 0.5) / ssize,
-    (realfull + 0.5) / ssize
-  );
-}
-
-void main() {
-  float srgb  = 2.1;
-  float gamma = 3.0;
-
-  vec3 x = percent(sourceSize[0].x, targetSize[0].x, texCoord.x);
-  vec3 y = percent(sourceSize[0].y, targetSize[0].y, texCoord.y);
-
-  //get points to interpolate across in linear RGB
-  vec4 a = toLQV(vpow(texture(source[0], vec2(x[1], y[1])), srgb).rgb);
-  vec4 b = toLQV(vpow(texture(source[0], vec2(x[2], y[1])), srgb).rgb);
-  vec4 c = toLQV(vpow(texture(source[0], vec2(x[1], y[2])), srgb).rgb);
-  vec4 d = toLQV(vpow(texture(source[0], vec2(x[2], y[2])), srgb).rgb);
-
-  //use perceptual gamma for luminance component
-  a.w = pow(a.w, 1 / gamma);
-  b.w = pow(b.w, 1 / gamma);
-  c.w = pow(c.w, 1 / gamma);
-  d.w = pow(d.w, 1 / gamma);
-
-  //interpolate
-  vec4 gammaLQV =
-    (1.0 - x[0]) * (1.0 - y[0]) * a +
-    (0.0 + x[0]) * (1.0 - y[0]) * b +
-    (1.0 - x[0]) * (0.0 + y[0]) * c +
-    (0.0 + x[0]) * (0.0 + y[0]) * d;
-
-  //convert luminance gamma back to linear
-  gammaLQV.w = pow(gammaLQV.w, gamma);
-
-  //convert color back to sRGB
-  fragColor = vpow(vec4(fromLQV(gammaLQV), 1), 1 / srgb);
-}

ares/Shaders/AANN.shader/manifest.bml

@@ -1,8 +0,0 @@
-input
-  filter: nearest
-
-program
-  fragment: AANN.fs
-
-output
-  filter: nearest

ares/Shaders/CRT-Lottes.shader/manifest.bml

@@ -1,10 +0,0 @@
-input
-  filter: nearest
-
-program
-  filter: nearest
-  wrap: border
-  fragment: shadertoy.fs
-
-output
-  filter: nearest

ares/Shaders/CRT-Lottes.shader/shadertoy.fs

@@ -1,145 +0,0 @@
-//
-// PUBLIC DOMAIN CRT STYLED SCAN-LINE SHADER
-//
-//   by Timothy Lottes
-//
-// This is more along the style of a really good CGA arcade monitor.
-// With RGB inputs instead of NTSC.
-// The shadow mask example has the mask rotated 90 degrees for less chromatic aberration.
-//
-// Left it unoptimized to show the theory behind the algorithm.
-//
-// It is an example what I personally would want as a display option for pixel art games.
-// Please take and use, change, or whatever.
-//
-
-#version 150
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-uniform int phase;
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-// Emulated input resolution.
-  vec2 res=sourceSize[0].xy;
-
-// Hardness of scanline.
-//  -8.0 = soft
-// -16.0 = medium
-float hardScan=-8.0;
-
-// Hardness of pixels in scanline.
-// -2.0 = soft
-// -4.0 = hard
-float hardPix=-3.0;
-
-// Display warp.
-// 0.0 = none
-// 1.0/8.0 = extreme
-vec2 warp=vec2(1.0/32.0,1.0/24.0); 
-
-// Amount of shadow mask.
-float maskDark=0.5;
-float maskLight=1.5;
-
-//------------------------------------------------------------------------
-
-// sRGB to Linear.
-// Assuing using sRGB typed textures this should not be needed.
-float ToLinear1(float c){return(c<=0.04045)?c/12.92:pow((c+0.055)/1.055,2.4);}
-vec3 ToLinear(vec3 c){return vec3(ToLinear1(c.r),ToLinear1(c.g),ToLinear1(c.b));}
-
-// Linear to sRGB.
-// Assuing using sRGB typed textures this should not be needed.
-float ToSrgb1(float c){return(c<0.0031308?c*12.92:1.055*pow(c,0.41666)-0.055);}
-vec3 ToSrgb(vec3 c){return vec3(ToSrgb1(c.r),ToSrgb1(c.g),ToSrgb1(c.b));}
-
-// Nearest emulated sample given floating point position and texel offset.
-// Also zero's off screen.
-vec3 Fetch(vec2 pos,vec2 off){
-  pos=(floor(pos*res+off)+vec2(0.5,0.5))/res;
-  return ToLinear(1.2 * texture(source[0],pos.xy,-16.0).rgb);}
-
-// Distance in emulated pixels to nearest texel.
-vec2 Dist(vec2 pos){pos=pos*res;return -((pos-floor(pos))-vec2(0.5));}
-    
-// 1D Gaussian.
-float Gaus(float pos,float scale){return exp2(scale*pos*pos);}
-
-// 3-tap Gaussian filter along horz line.
-vec3 Horz3(vec2 pos,float off){
-  vec3 b=Fetch(pos,vec2(-1.0,off));
-  vec3 c=Fetch(pos,vec2( 0.0,off));
-  vec3 d=Fetch(pos,vec2( 1.0,off));
-  float dst=Dist(pos).x;
-  // Convert distance to weight.
-  float scale=hardPix;
-  float wb=Gaus(dst-1.0,scale);
-  float wc=Gaus(dst+0.0,scale);
-  float wd=Gaus(dst+1.0,scale);
-  // Return filtered sample.
-  return (b*wb+c*wc+d*wd)/(wb+wc+wd);}
-
-// 5-tap Gaussian filter along horz line.
-vec3 Horz5(vec2 pos,float off){
-  vec3 a=Fetch(pos,vec2(-2.0,off));
-  vec3 b=Fetch(pos,vec2(-1.0,off));
-  vec3 c=Fetch(pos,vec2( 0.0,off));
-  vec3 d=Fetch(pos,vec2( 1.0,off));
-  vec3 e=Fetch(pos,vec2( 2.0,off));
-  float dst=Dist(pos).x;
-  // Convert distance to weight.
-  float scale=hardPix;
-  float wa=Gaus(dst-2.0,scale);
-  float wb=Gaus(dst-1.0,scale);
-  float wc=Gaus(dst+0.0,scale);
-  float wd=Gaus(dst+1.0,scale);
-  float we=Gaus(dst+2.0,scale);
-  // Return filtered sample.
-  return (a*wa+b*wb+c*wc+d*wd+e*we)/(wa+wb+wc+wd+we);}
-
-// Return scanline weight.
-float Scan(vec2 pos,float off){
-  float dst=Dist(pos).y;
-  return Gaus(dst+off,hardScan);}
-
-// Allow nearest three lines to effect pixel.
-vec3 Tri(vec2 pos){
-  vec3 a=Horz3(pos,-1.0);
-  vec3 b=Horz5(pos, 0.0);
-  vec3 c=Horz3(pos, 1.0);
-  float wa=Scan(pos,-1.0);
-  float wb=Scan(pos, 0.0);
-  float wc=Scan(pos, 1.0);
-  return a*wa+b*wb+c*wc;}
-
-// Distortion of scanlines, and end of screen alpha.
-vec2 Warp(vec2 pos){
-  pos=pos*2.0-1.0;    
-  pos*=vec2(1.0+(pos.y*pos.y)*warp.x,1.0+(pos.x*pos.x)*warp.y);
-  return pos*0.5+0.5;}
-
-// Shadow mask.
-vec3 Mask(vec2 pos){
-  pos.x+=pos.y*3.0;
-  vec3 mask=vec3(maskDark,maskDark,maskDark);
-  pos.x=fract(pos.x/6.0);
-  if(pos.x<0.333)mask.r=maskLight;
-  else if(pos.x<0.666)mask.g=maskLight;
-  else mask.b=maskLight;
-  return mask;}    
-
-void main() {
-    vec2 pos = texCoord.xy * 1.0001;
-      hardScan=-12.0;
-//      maskDark=maskLight;
-      pos=Warp(pos.xy);
-    fragColor.rgb=Tri(pos)*Mask(gl_FragCoord.xy);    
-  fragColor.a=1.0;
-  fragColor = vec4(ToSrgb(fragColor.rgb), fragColor.a);
-}

ares/Shaders/CRT-Lottes2.shader/lottes.fs

@@ -1,609 +0,0 @@
-#version 150
-
-//_____________________________/\_______________________________
-//==============================================================
-//
-//
-//      [CRTS] PUBLIC DOMAIN CRT-STYLED SCALAR - 20180120b
-//
-//                      by Timothy Lottes
-//             https://www.shadertoy.com/view/MtSfRK
-//              adapted for quark syntax by hunterk
-//
-//
-//==============================================================
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-//_____________________________/\_______________________________
-//==============================================================
-//
-//                         WHAT'S NEW
-//
-//--------------------------------------------------------------
-// Evolution of prior shadertoy example
-//--------------------------------------------------------------
-// This one is semi-optimized
-//  - Less texture fetches
-//  - Didn't get to instruction level optimization
-//  - Could likely use texture fetch to generate phosphor mask
-//--------------------------------------------------------------
-// Added options to disable unused features
-//--------------------------------------------------------------
-// Added in exposure matching
-//  - Given scan-line effect and mask always darkens image
-//  - Uses generalized tonemapper to boost mid-level
-//  - Note this can compress highlights
-//  - And won't get back peak brightness
-//  - But best option if one doesn't want as much darkening
-//--------------------------------------------------------------
-// Includes option saturation and contrast controls
-//--------------------------------------------------------------
-// Added in subtractive aperture grille
-//  - This is a bit brighter than prior
-//--------------------------------------------------------------
-// Make sure input to this filter is already low-resolution
-//  - This is not designed to work on titles doing the following
-//     - Rendering to hi-res with nearest sampling
-//--------------------------------------------------------------
-// Added a fast and more pixely option for 2 tap/pixel
-//--------------------------------------------------------------
-// Improved the vignette when WARP is enabled
-//--------------------------------------------------------------
-// Didn't test HLSL or CPU options
-//  - Will incorportate patches if they are broken
-//  - But out of time to try them myself
-//==============================================================
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-//_____________________________/\_______________________________
-//==============================================================
-//
-//          LICENSE = UNLICENSE (aka PUBLIC DOMAIN)
-//
-//--------------------------------------------------------------
-// This is free and unencumbered software released into the 
-// public domain.
-//--------------------------------------------------------------
-// Anyone is free to copy, modify, publish, use, compile, sell, 
-// or distribute this software, either in source code form or as
-// a compiled binary, for any purpose, commercial or 
-// non-commercial, and by any means.
-//--------------------------------------------------------------
-// In jurisdictions that recognize copyright laws, the author or
-// authors of this software dedicate any and all copyright 
-// interest in the software to the public domain. We make this
-// dedication for the benefit of the public at large and to the
-// detriment of our heirs and successors. We intend this 
-// dedication to be an overt act of relinquishment in perpetuity
-// of all present and future rights to this software under 
-// copyright law.
-//--------------------------------------------------------------
-// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
-// KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE 
-// WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 
-// PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS BE
-// LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-// AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT 
-// OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 
-// DEALINGS IN THE SOFTWARE.
-//--------------------------------------------------------------
-// For more information, please refer to 
-// <http://unlicense.org/>
-//==============================================================
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-
-#define MASK 1.0
-#define MASK_INTENSITY 0.5
-#define SCANLINE_THINNESS 0.5
-#define SCAN_BLUR 2.5
-#define CURVATURE 0.02
-#define TRINITRON_CURVE 0.0
-#define CORNER 3.0
-#define CRT_GAMMA 2.4
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-uniform vec4 outputSize;
-
-in Vertex {
-   vec2 vTexCoord;
-};
-
-out vec4 FragColor;
-
-//_____________________________/\_______________________________
-//==============================================================
-//
-//                       GAMMA FUNCTIONS
-//
-//--------------------------------------------------------------
-//--------------------------------------------------------------
-// Since shadertoy doesn't have sRGB textures
-// And we need linear input into shader
-// Don't do this in your code
-float FromSrgb1(float c){
- return (c<=0.04045)?c*(1.0/12.92):
-   pow(c*(1.0/1.055)+(0.055/1.055),CRT_GAMMA);}
-//--------------------------------------------------------------
-vec3 FromSrgb(vec3 c){return vec3(
- FromSrgb1(c.r),FromSrgb1(c.g),FromSrgb1(c.b));}
- 
-// Convert from linear to sRGB
-// Since shader toy output is not linear
-float ToSrgb1(float c){
- return(c<0.0031308?c*12.92:1.055*pow(c,0.41666)-0.055);}
-//--------------------------------------------------------------
-vec3 ToSrgb(vec3 c){return vec3(
- ToSrgb1(c.r),ToSrgb1(c.g),ToSrgb1(c.b));}
-//--------------------------------------------------------------
-
-//_____________________________/\_______________________________
-//==============================================================
-//
-//                           DEFINES
-//
-//--------------------------------------------------------------
-// CRTS_CPU - CPU code
-// CRTS_GPU - GPU code
-//--------------------------------------------------------------
-// CRTS_GLSL - GLSL
-// CRTS_HLSL - HLSL (not tested yet)
-//--------------------------------------------------------------
-// CRTS_DEBUG - Define to see on/off split screen
-//--------------------------------------------------------------
-// CRTS_WARP - Apply screen warp
-//--------------------------------------------------------------
-// CRTS_2_TAP - Faster very pixely 2-tap filter (off is 8)
-//--------------------------------------------------------------
-// CRTS_MASK_GRILLE      - Aperture grille (aka Trinitron)
-// CRTS_MASK_GRILLE_LITE - Brighter (subtractive channels)
-// CRTS_MASK_NONE        - No mask
-// CRTS_MASK_SHADOW      - Horizontally stretched shadow mask
-//--------------------------------------------------------------
-// CRTS_TONE       - Normalize mid-level and process color
-// CRTS_CONTRAST   - Process color - enable contrast control
-// CRTS_SATURATION - Process color - enable saturation control
-//--------------------------------------------------------------
-#define CRTS_STATIC
-#define CrtsPow
-#define CRTS_RESTRICT
-//==============================================================
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-
-//==============================================================
-//                      SETUP FOR CRTS
-//--------------------------------------------------------------
-//==============================================================
-//#define CRTS_DEBUG 1
-#define CRTS_GPU 1
-#define CRTS_GLSL 1
-//--------------------------------------------------------------
-//#define CRTS_2_TAP 1
-//--------------------------------------------------------------
-#define CRTS_TONE 1
-#define CRTS_CONTRAST 0
-#define CRTS_SATURATION 0
-//--------------------------------------------------------------
-#define CRTS_WARP 1
-//--------------------------------------------------------------
-// Try different masks -> moved to runtime parameters
-//#define CRTS_MASK_GRILLE 1
-//#define CRTS_MASK_GRILLE_LITE 1
-//#define CRTS_MASK_NONE 1
-//#define CRTS_MASK_SHADOW 1
-//--------------------------------------------------------------
-// Scanline thinness
-//  0.50 = fused scanlines
-//  0.70 = recommended default
-//  1.00 = thinner scanlines (too thin)
-#define INPUT_THIN (0.5 + (0.5 * SCANLINE_THINNESS))
-//--------------------------------------------------------------
-// Horizonal scan blur
-//  -3.0 = pixely
-//  -2.5 = default
-//  -2.0 = smooth
-//  -1.0 = too blurry
-#define INPUT_BLUR (-1.0 * SCAN_BLUR)
-//--------------------------------------------------------------
-// Shadow mask effect, ranges from,
-//  0.25 = large amount of mask (not recommended, too dark)
-//  0.50 = recommended default
-//  1.00 = no shadow mask
-#define INPUT_MASK (1.0 - MASK_INTENSITY)
-//--------------------------------------------------------------
-#define INPUT_X sourceSize[0].x
-#define INPUT_Y sourceSize[0].y
-//--------------------------------------------------------------
-// Setup the function which returns input image color
-vec3 CrtsFetch(vec2 uv){
- // For shadertoy, scale to get native texels in the image
- uv*=vec2(INPUT_X,INPUT_Y)/sourceSize[0].xy;
- // Move towards intersting parts
-// uv+=vec2(0.5,0.5);
- // Non-shadertoy case would not have the color conversion
- return FromSrgb(texture(source[0],uv.xy,-16.0).rgb);}
- 
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////
-//_____________________________/\_______________________________
-//==============================================================
-//
-//                          GPU CODE
-//
-//==============================================================
-#ifdef CRTS_GPU
-//_____________________________/\_______________________________
-//==============================================================
-//                         PORTABILITY
-//==============================================================
- #ifdef CRTS_GLSL
-  #define CrtsF1 float
-  #define CrtsF2 vec2
-  #define CrtsF3 vec3
-  #define CrtsF4 vec4
-  #define CrtsFractF1 fract
-  #define CrtsRcpF1(x) (1.0/(x))
-  #define CrtsSatF1(x) clamp((x),0.0,1.0)
-//--------------------------------------------------------------
-  CrtsF1 CrtsMax3F1(CrtsF1 a,CrtsF1 b,CrtsF1 c){
-   return max(a,max(b,c));}
- #endif
-//==============================================================
- #ifdef CRTS_HLSL
-  #define CrtsF1 float
-  #define CrtsF2 float2
-  #define CrtsF3 float3
-  #define CrtsF4 float4
-  #define CrtsFractF1 frac
-  #define CrtsRcpF1(x) (1.0/(x))
-  #define CrtsSatF1(x) saturate(x)
-//--------------------------------------------------------------
-  CrtsF1 CrtsMax3F1(CrtsF1 a,CrtsF1 b,CrtsF1 c){
-   return max(a,max(b,c));}
- #endif
-//_____________________________/\_______________________________
-//==============================================================
-//              TONAL CONTROL CONSTANT GENERATION
-//--------------------------------------------------------------
-// This is in here for rapid prototyping
-// Please use the CPU code and pass in as constants
-//==============================================================
- CrtsF4 CrtsTone(
- CrtsF1 contrast,
- CrtsF1 saturation,
- CrtsF1 thin,
- CrtsF1 mask){
-//--------------------------------------------------------------
-  if(MASK == 0.0) mask=1.0;
-//--------------------------------------------------------------
-  if(MASK == 1.0){
-   // Normal R mask is {1.0,mask,mask}
-   // LITE   R mask is {mask,1.0,1.0}
-   mask=0.5+mask*0.5;
-   }
-//--------------------------------------------------------------
-  CrtsF4 ret;
-  CrtsF1 midOut=0.18/((1.5-thin)*(0.5*mask+0.5));
-  CrtsF1 pMidIn=pow(0.18,contrast);
-  ret.x=contrast;
-  ret.y=((-pMidIn)+midOut)/((1.0-pMidIn)*midOut);
-  ret.z=((-pMidIn)*midOut+pMidIn)/(midOut*(-pMidIn)+midOut);
-  ret.w=contrast+saturation;
-  return ret;}
-//_____________________________/\_______________________________
-//==============================================================
-//                            MASK
-//--------------------------------------------------------------
-// Letting LCD/OLED pixel elements function like CRT phosphors
-// So "phosphor" resolution scales with display resolution
-//--------------------------------------------------------------
-// Not applying any warp to the mask (want high frequency)
-// Real aperture grille has a mask which gets wider on ends
-// Not attempting to be "real" but instead look the best
-//--------------------------------------------------------------
-// Shadow mask is stretched horizontally
-//  RRGGBB
-//  GBBRRG
-//  RRGGBB
-// This tends to look better on LCDs than vertical
-// Also 2 pixel width is required to get triad centered
-//--------------------------------------------------------------
-// The LITE version of the Aperture Grille is brighter
-// Uses {dark,1.0,1.0} for R channel
-// Non LITE version uses {1.0,dark,dark}
-//--------------------------------------------------------------
-// 'pos' - This is 'fragCoord.xy'
-//         Pixel {0,0} should be {0.5,0.5}
-//         Pixel {1,1} should be {1.5,1.5} 
-//--------------------------------------------------------------
-// 'dark' - Exposure of of masked channel
-//          0.0=fully off, 1.0=no effect
-//==============================================================
- CrtsF3 CrtsMask(CrtsF2 pos,CrtsF1 dark){
-  if(MASK == 2.0){
-   CrtsF3 m=CrtsF3(dark,dark,dark);
-   CrtsF1 x=CrtsFractF1(pos.x*(1.0/3.0));
-   if(x<(1.0/3.0))m.r=1.0;
-   else if(x<(2.0/3.0))m.g=1.0;
-   else m.b=1.0;
-   return m;
-  }
-//--------------------------------------------------------------
-  if(MASK == 1.0){
-   CrtsF3 m=CrtsF3(1.0,1.0,1.0);
-   CrtsF1 x=CrtsFractF1(pos.x*(1.0/3.0));
-   if(x<(1.0/3.0))m.r=dark;
-   else if(x<(2.0/3.0))m.g=dark;
-   else m.b=dark;
-   return m;
-  }
-//--------------------------------------------------------------
-  if(MASK == 0.0){
-   return CrtsF3(1.0,1.0,1.0);
-  }
-//--------------------------------------------------------------
-  if(MASK == 3.0){
-   pos.x+=pos.y*2.9999;
-   CrtsF3 m=CrtsF3(dark,dark,dark);
-   CrtsF1 x=CrtsFractF1(pos.x*(1.0/6.0));
-   if(x<(1.0/3.0))m.r=1.0;
-   else if(x<(2.0/3.0))m.g=1.0;
-   else m.b=1.0;
-   return m;
-  }
- }
-//_____________________________/\_______________________________
-//==============================================================
-//                        FILTER ENTRY
-//--------------------------------------------------------------
-// Input must be linear
-// Output color is linear
-//--------------------------------------------------------------
-// Must have fetch function setup: CrtsF3 CrtsFetch(CrtsF2 uv)
-//  - The 'uv' range is {0.0 to 1.0} for input texture
-//  - Output of this must be linear color
-//--------------------------------------------------------------
-// SCANLINE MATH & AUTO-EXPOSURE NOTES
-// ===================================
-// Each output line has contribution from at most 2 scanlines
-// Scanlines are shaped by a windowed cosine function
-// This shape blends together well with only 2 lines of overlap
-//--------------------------------------------------------------
-// Base scanline intensity is as follows
-// which leaves output intensity range from {0 to 1.0}
-// --------
-// thin := range {thick 0.5 to thin 1.0}
-// off  := range {0.0 to <1.0}, 
-//         sub-pixel offset between two scanlines
-//  --------
-//  a0=cos(min(0.5,     off *thin)*2pi)*0.5+0.5;
-//  a1=cos(min(0.5,(1.0-off)*thin)*2pi)*0.5+0.5;
-//--------------------------------------------------------------
-// This leads to a image darkening factor of roughly: 
-//  {(1.5-thin)/1.0}
-// This is further reduced by the mask: 
-//  {1.0/2.0+mask*1.0/2.0}
-// Reciprocal of combined effect is used for auto-exposure
-//  to scale up the mid-level in the tonemapper
-//==============================================================
- CrtsF3 CrtsFilter(
-//--------------------------------------------------------------
-  // SV_POSITION, fragCoord.xy
-  CrtsF2 ipos,
-//--------------------------------------------------------------
-  // inputSize / outputSize (in pixels)
-  CrtsF2 inputSizeDivOutputSize,     
-//--------------------------------------------------------------
-  // 0.5 * inputSize (in pixels)
-  CrtsF2 halfInputSize,
-//--------------------------------------------------------------
-  // 1.0 / inputSize (in pixels)
-  CrtsF2 rcpInputSize,
-//--------------------------------------------------------------
-  // 1.0 / outputSize (in pixels)
-  CrtsF2 rcpOutputSize,
-//--------------------------------------------------------------
-  // 2.0 / outputSize (in pixels)
-  CrtsF2 twoDivOutputSize,   
-//--------------------------------------------------------------
-  // inputSize.y
-  CrtsF1 inputHeight,
-//--------------------------------------------------------------
-  // Warp scanlines but not phosphor mask
-  //  0.0 = no warp
-  //  1.0/64.0 = light warping
-  //  1.0/32.0 = more warping
-  // Want x and y warping to be different (based on aspect)
-  CrtsF2 warp,
-//--------------------------------------------------------------
-  // Scanline thinness
-  //  0.50 = fused scanlines
-  //  0.70 = recommended default
-  //  1.00 = thinner scanlines (too thin)
-  // Shared with CrtsTone() function
-  CrtsF1 thin,
-//--------------------------------------------------------------
-  // Horizonal scan blur
-  //  -3.0 = pixely
-  //  -2.5 = default
-  //  -2.0 = smooth
-  //  -1.0 = too blurry
-  CrtsF1 blur,
-//--------------------------------------------------------------
-  // Shadow mask effect, ranges from,
-  //  0.25 = large amount of mask (not recommended, too dark)
-  //  0.50 = recommended default
-  //  1.00 = no shadow mask
-  // Shared with CrtsTone() function
-  CrtsF1 mask,
-//--------------------------------------------------------------
-  // Tonal curve parameters generated by CrtsTone()
-  CrtsF4 tone
-//--------------------------------------------------------------
- ){
-//--------------------------------------------------------------
-  #ifdef CRTS_DEBUG
-   CrtsF2 uv=ipos*rcpOutputSize;
-   // Show second half processed, and first half un-processed
-   if(uv.x<0.5){
-    // Force nearest to get squares
-    uv*=1.0/rcpInputSize;
-    uv=floor(uv)+CrtsF2(0.5,0.5);
-    uv*=rcpInputSize;
-    CrtsF3 color=CrtsFetch(uv);
-    return color;}
-  #endif
-//--------------------------------------------------------------
-  // Optional apply warp
-  CrtsF2 pos;
-  #ifdef CRTS_WARP
-   // Convert to {-1 to 1} range
-   pos=ipos*twoDivOutputSize-CrtsF2(1.0,1.0);
-   // Distort pushes image outside {-1 to 1} range
-   pos*=CrtsF2(
-    1.0+(pos.y*pos.y)*warp.x,
-    1.0+(pos.x*pos.x)*warp.y);
-   // TODO: Vignette needs optimization
-   CrtsF1 vin=(1.0-(
-    (1.0-CrtsSatF1(pos.x*pos.x))*(1.0-CrtsSatF1(pos.y*pos.y)))) * (0.998 + (0.001 * CORNER));
-   vin=CrtsSatF1((-vin)*inputHeight+inputHeight);
-   // Leave in {0 to inputSize}
-   pos=pos*halfInputSize+halfInputSize;     
-  #else
-   pos=ipos*inputSizeDivOutputSize;
-  #endif
-//--------------------------------------------------------------
-  // Snap to center of first scanline
-  CrtsF1 y0=floor(pos.y-0.5)+0.5;
-  #ifdef CRTS_2_TAP
-   // Using Inigo's "Improved Texture Interpolation"
-   // http://iquilezles.org/www/articles/texture/texture.htm
-   pos.x+=0.5;
-   CrtsF1 xi=floor(pos.x);
-   CrtsF1 xf=pos.x-xi;
-   xf=xf*xf*xf*(xf*(xf*6.0-15.0)+10.0);  
-   CrtsF1 x0=xi+xf-0.5;
-   CrtsF2 p=CrtsF2(x0*rcpInputSize.x,y0*rcpInputSize.y);     
-   // Coordinate adjusted bilinear fetch from 2 nearest scanlines
-   CrtsF3 colA=CrtsFetch(p);
-   p.y+=rcpInputSize.y;
-   CrtsF3 colB=CrtsFetch(p);
-  #else
-   // Snap to center of one of four pixels
-   CrtsF1 x0=floor(pos.x-1.5)+0.5;
-   // Inital UV position
-   CrtsF2 p=CrtsF2(x0*rcpInputSize.x,y0*rcpInputSize.y);     
-   // Fetch 4 nearest texels from 2 nearest scanlines
-   CrtsF3 colA0=CrtsFetch(p);
-   p.x+=rcpInputSize.x;
-   CrtsF3 colA1=CrtsFetch(p);
-   p.x+=rcpInputSize.x;
-   CrtsF3 colA2=CrtsFetch(p);
-   p.x+=rcpInputSize.x;
-   CrtsF3 colA3=CrtsFetch(p);
-   p.y+=rcpInputSize.y;
-   CrtsF3 colB3=CrtsFetch(p);
-   p.x-=rcpInputSize.x;
-   CrtsF3 colB2=CrtsFetch(p);
-   p.x-=rcpInputSize.x;
-   CrtsF3 colB1=CrtsFetch(p);
-   p.x-=rcpInputSize.x;
-   CrtsF3 colB0=CrtsFetch(p);
-  #endif
-//--------------------------------------------------------------
-  // Vertical filter
-  // Scanline intensity is using sine wave
-  // Easy filter window and integral used later in exposure
-  CrtsF1 off=pos.y-y0;
-  CrtsF1 pi2=6.28318530717958;
-  CrtsF1 hlf=0.5;
-  CrtsF1 scanA=cos(min(0.5,  off *thin     )*pi2)*hlf+hlf;
-  CrtsF1 scanB=cos(min(0.5,(-off)*thin+thin)*pi2)*hlf+hlf;
-//--------------------------------------------------------------
-  #ifdef CRTS_2_TAP
-   #ifdef CRTS_WARP
-    // Get rid of wrong pixels on edge
-    scanA*=vin;
-    scanB*=vin;
-   #endif
-   // Apply vertical filter
-   CrtsF3 color=(colA*scanA)+(colB*scanB);
-  #else
-   // Horizontal kernel is simple gaussian filter
-   CrtsF1 off0=pos.x-x0;
-   CrtsF1 off1=off0-1.0;
-   CrtsF1 off2=off0-2.0;
-   CrtsF1 off3=off0-3.0;
-   CrtsF1 pix0=exp2(blur*off0*off0);
-   CrtsF1 pix1=exp2(blur*off1*off1);
-   CrtsF1 pix2=exp2(blur*off2*off2);
-   CrtsF1 pix3=exp2(blur*off3*off3);
-   CrtsF1 pixT=CrtsRcpF1(pix0+pix1+pix2+pix3);
-   #ifdef CRTS_WARP
-    // Get rid of wrong pixels on edge
-    pixT*=vin;
-   #endif
-   scanA*=pixT;
-   scanB*=pixT;
-   // Apply horizontal and vertical filters
-   CrtsF3 color=
-    (colA0*pix0+colA1*pix1+colA2*pix2+colA3*pix3)*scanA +
-    (colB0*pix0+colB1*pix1+colB2*pix2+colB3*pix3)*scanB;
-  #endif
-//--------------------------------------------------------------
-  // Apply phosphor mask          
-  color*=CrtsMask(ipos,mask);
-//--------------------------------------------------------------
-  // Optional color processing
-  #ifdef CRTS_TONE
-   // Tonal control, start by protecting from /0
-   CrtsF1 peak=max(1.0/(256.0*65536.0),
-    CrtsMax3F1(color.r,color.g,color.b));
-   // Compute the ratios of {R,G,B}
-   CrtsF3 ratio=color*CrtsRcpF1(peak);
-   // Apply tonal curve to peak value
-   #ifdef CRTS_CONTRAST
-    peak=pow(peak,tone.x);
-   #endif
-   peak=peak*CrtsRcpF1(peak*tone.y+tone.z);
-   // Apply saturation
-   #ifdef CRTS_SATURATION
-    ratio=pow(ratio,CrtsF3(tone.w,tone.w,tone.w));
-   #endif
-   // Reconstruct color
-   return ratio*peak;
- #else
-  return color;
- #endif
-//--------------------------------------------------------------
- }
-#endif
-
-void main() {
-   vec2 warp_factor;
-   warp_factor.x = CURVATURE;
-   warp_factor.y = (3.0 / 4.0) * warp_factor.x; // assume 4:3 aspect
-   warp_factor.x *= (1.0 - TRINITRON_CURVE);
-   FragColor.rgb = CrtsFilter(vTexCoord.xy * outputSize.xy,
-   sourceSize[0].xy * outputSize.zw,
-   sourceSize[0].xy * vec2(0.5,0.5),
-   sourceSize[0].zw,
-   outputSize.zw,
-   2.0 * outputSize.zw,
-   sourceSize[0].y,
-   warp_factor,
-   INPUT_THIN,
-   INPUT_BLUR,
-   INPUT_MASK,
-   CrtsTone(1.0,0.0,INPUT_THIN,INPUT_MASK));
-   
-   // Shadertoy outputs non-linear color
-   FragColor.rgb = ToSrgb(FragColor.rgb);
-}

ares/Shaders/CRT-Lottes2.shader/lottes.vs

@@ -1,16 +0,0 @@
-#version 150
-
-in vec4 position;
-in vec2 texCoord;
-
-out Vertex {
-   vec2 vTexCoord;
-};
-
-uniform vec4 targetSize;
-uniform vec4 sourceSize[];
-
-void main() {
-   gl_Position = position;
-   vTexCoord = texCoord;
-}

ares/Shaders/CRT-Lottes2.shader/manifest.bml

@@ -1,12 +0,0 @@
-input
-  filter: nearest
-
-program
-  filter: nearest
-  vertex: lottes.vs
-  fragment: lottes.fs
-  
-output
-  height: 0
-  width: 0
-  filter: linear

ares/Shaders/Curvature.shader/curvature.fs

@@ -1,21 +0,0 @@
-#version 150
-#define distortion 0.2
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-vec2 radialDistortion(vec2 coord) {
-  vec2 cc = coord - vec2(0.5);
-  float dist = dot(cc, cc) * distortion;
-  return coord + cc * (1.0 - dist) * dist;
-}
-
-void main() {
-  fragColor = texture(source[0], radialDistortion(texCoord));
-}

ares/Shaders/Curvature.shader/manifest.bml

@@ -1,4 +0,0 @@
-program
-  filter: linear
-  wrap: border
-  fragment: curvature.fs

ares/Shaders/Edge Detection.shader/edge-detection.fs

@@ -1,25 +0,0 @@
-#version 150
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-vec3 grayscale(vec3 color) {
-  return vec3(dot(color, vec3(0.3, 0.59, 0.11)));
-}
-
-void main() {
-  vec2 offset = fract(texCoord * sourceSize[0].xy) - 0.5;
-  offset /= sourceSize[0].xy;
-
-  vec3 cx = texture(source[0], texCoord - offset).xyz;
-  vec3 cy = texture(source[0], texCoord).xyz;
-  vec3 cz = vec3(5.0 * grayscale(abs(cx - cy)));
-
-  fragColor = vec4(clamp(cz, 0.0, 1.0), 1.0);
-}

ares/Shaders/Edge Detection.shader/manifest.bml

@@ -1,4 +0,0 @@
-program
-  filter: linear
-  wrap: edge
-  fragment: edge-detection.fs

ares/Shaders/GritsScanlines.shader/GritsScanlines.fs

@@ -1,99 +0,0 @@
-#version 150
-
-// GritsScanlines by torridgristle
-// license: public domain (https://forums.libretro.com/t/lightweight-lut-based-scanline-glow-concept-prototype-glsl/18336/7)
-
-/* Runtime parameters
-#in LuminanceDawnbringer
-#in LuminanceLUT
-#in ScanlinesOpacity
-#in GammaCorrection
-#in TrinitronColors
-*/
-
-// static parameters
-//#define LuminanceDawnbringer
-#define LuminanceLUT
-//#define TrinitronColors
-#define ScanlinesOpacity 0.9
-//#define GammaCorrection 1.2
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-uniform vec4 targetSize;
-uniform sampler2D pixmap[];
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-#ifdef LuminanceLUT
-#define LUT_SizeLum 16.0
-
-  // Code taken from RetroArch's LUT shader
-float luminancelut(vec4 org)
-{
-  vec4 imgColorLum = org;
-  float redLum = ( imgColorLum.r * (LUT_SizeLum - 1.0) + 0.4999 ) / (LUT_SizeLum * LUT_SizeLum);
-  float greenLum = ( imgColorLum.g * (LUT_SizeLum - 1.0) + 0.4999 ) / LUT_SizeLum;
-  float blue1Lum = (floor( imgColorLum.b  * (LUT_SizeLum - 1.0) ) / LUT_SizeLum) + redLum;
-  float blue2Lum = (ceil( imgColorLum.b  * (LUT_SizeLum - 1.0) ) / LUT_SizeLum) + redLum;
-  float mixerLum = clamp(max((imgColorLum.b - blue1Lum) / (blue2Lum - blue1Lum), 0.0), 0.0, 32.0);
-  float color1Lum = texture(pixmap[1], vec2( blue1Lum, greenLum )).x;
-  float color2Lum = texture(pixmap[1], vec2( blue2Lum, greenLum )).x;
-  return mix(color1Lum, color2Lum, mixerLum);
-}
-#endif
-
-#ifdef TrinitronColors
-#define LUT_SizeTrinitron 32.0
-
-vec4 TrinitronD50(vec4 org)
-{
-  vec4 imgColorTrinitron = org;
-  float redTrinitron = ( imgColorTrinitron.r * (LUT_SizeTrinitron - 1.0) + 0.4999 ) / (LUT_SizeTrinitron * LUT_SizeTrinitron);
-  float greenTrinitron = ( imgColorTrinitron.g * (LUT_SizeTrinitron - 1.0) + 0.4999 ) / LUT_SizeTrinitron;
-  float blue1Trinitron = (floor( imgColorTrinitron.b  * (LUT_SizeTrinitron - 1.0) ) / LUT_SizeTrinitron) + redTrinitron;
-  float blue2Trinitron = (ceil( imgColorTrinitron.b  * (LUT_SizeTrinitron - 1.0) ) / LUT_SizeTrinitron) + redTrinitron;
-  float mixerTrinitron = clamp(max((imgColorTrinitron.b - blue1Trinitron) / (blue2Trinitron - blue1Trinitron), 0.0), 0.0, 32.0);
-  vec4 color1Trinitron = texture(pixmap[2], vec2( blue1Trinitron, greenTrinitron ));
-  vec4 color2Trinitron = texture(pixmap[2], vec2( blue2Trinitron, greenTrinitron ));
-  vec4 fragColorTrinitron = mix(color1Trinitron, color2Trinitron, mixerTrinitron);
-  return vec4(pow(fragColorTrinitron.rgb,vec3(GammaCorrection,GammaCorrection,GammaCorrection)),1.0);
-} 
-#endif
-
-void main() {
-
-//Source Image
-  vec4 org = texture(source[0], texCoord);
-   
-#ifdef LuminanceLUT
-// Use a 3DLUT instead of an equation so that it can use any arbitrary mess you can come up with.
-  float luminance = luminancelut(org);
-#elif defined LuminanceDawnbringer
-// Dawnbringer's brightness equation from Dawnbringer's Toolbox scripts for Grafx2
-  float luminance = sqrt(org.r*org.r*0.0676 + org.g*org.g*0.3025 + org.b*org.b*0.0361) * 1.5690256395005606;
-#else
-// Plain, standard, fine; slightly faster
-  float luminance = ((0.299*org.r) + (0.587*org.g) + (0.114*org.b));
-#endif
-
-// Don't let it exceed 1.0
-  luminance = clamp(luminance, 0.0, 1.0);
-
-// Scanline Mapping, based on the Phosphor LUT shader's method of tiling a texture over the screen
-  vec2 LUTeffectiveCoord = vec2(luminance,fract((texCoord.y*targetSize.y)/4.0));
-
-// Scanline Layer
-  vec4 screen = texture(pixmap[0], LUTeffectiveCoord);
-
-// Output multiplying the scanlines into the original image, with control over opacity
-#ifdef TrinitronColors
-  org = TrinitronD50(org);
-#endif
-  fragColor = ((screen*ScanlinesOpacity)+(1.0 - ScanlinesOpacity)) * (org);
-}
-

ares/Shaders/GritsScanlines.shader/manifest.bml

@@ -1,35 +0,0 @@
-settings
-  LuminanceDawnbringer
-    active: false
-  LuminanceLUT
-    active: false
-  TrinitronColors
-    active: true
-  ScanlinesOpacity: 0.9
-    min: 0.0
-    max: 1.0
-    step: 0.05
-  GammaCorrection: 1.2
-    min: 0.5
-    max: 2.0
-    step: 0.1
-
-
-program
-  filter: nearest
-  wrap: edge
-  width: 100%
-  height: 400%
-  fragment: GritsScanlines.fs
-  pixmap: Scanline-LUT-4px.png
-    filter: linear
-    wrap: edge
-  pixmap: Fake-Self-Illumination.png
-    filter: linear
-    wrap: edge
-  pixmap: Trinitron D50 Absolute Colorimetric - LUT.png
-    filter: linear
-    wrap: edge
-
-output1
-  filter: linear

ares/Shaders/Interlacing.shader/interlace.fs

@@ -1,39 +0,0 @@
-#version 150
-
-/*
-   Interlacing
-   Author: hunterk
-   License: Public domain
-   
-   Note: This shader is designed to work with the typical interlaced output from an emulator, which displays both even and odd fields twice.
-   This shader will un-weave the image, resulting in a standard, alternating-field interlacing.
-*/
-
-uniform sampler2D source[];
-uniform vec2 targetSize;
-uniform vec4 sourceSize[];
-uniform int phase;
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-// This controls how bright the intermediate lines are; 0.0 = totally black
-#define percent 0.0
-
-void main()
-{
-vec4 res = texture(source[0], texCoord);
-   float y = 0.0;
-
-   // assume anything with a vertical resolution greater than 400 lines is interlaced
-   if (sourceSize[0].y > 400.0) y = sourceSize[0].y * texCoord.y + phase;
-   else
-      y = 2.00001 * sourceSize[0].y * texCoord.y;
-
-   if (mod(y, 2.0) > 0.99999) fragColor = res;
-   else
-      fragColor = vec4(percent) * res;
-}

ares/Shaders/Interlacing.shader/manifest.bml

@@ -1,6 +0,0 @@
-input
-  filter: nearest
-
-program
-  fragment: interlace.fs
-  modulo: 2

ares/Shaders/PAL-r57shell.shader/manifest.bml

@@ -1,11 +0,0 @@
-input
-  filter: nearest
-
-program
-  filter: nearest
-  height: 100%
-  fragment: pal-r57shell.fs
-  
-output
-  height: 0
-  filter: linear

ares/Shaders/PAL-r57shell.shader/pal-r57shell.fs

@@ -1,368 +0,0 @@
-#version 150
-
-// NES PAL composite signal simulation for RetroArch
-// shader by r57shell
-// thanks to feos & HardWareMan & NewRisingSun
-
-// also TV subpixels and scanlines
-
-// LICENSE: PUBLIC DOMAIN
-
-// NOTE: for nice TV subpixels and scanlines I recommend to
-// disable this features here and apply CRT-specialized shader.
-
-// Quality considerations
-
-// there are three main options:
-// USE_RAW (R), USE_DELAY_LINE (D), USE_COLORIMETRY (C)
-// here is table of quality in decreasing order:
-// RDC, RD, RC, DC, D, C
-
-// compatibility macros
-#define float2 vec2
-#define float3 vec3
-#define float4 vec4
-#define frac(c) fract(c)
-#define saturate(c) clamp(c, 0.0, 1.0)
-#define fmod(x,y) mod(x,y)
-#define mul(x,y) (y*x)
-#define float2x2 mat2
-#define float3x3 mat3
-#define float4x4 mat4
-#define bool2 bvec2
-#define bool3 bvec3
-#define bool4 bvec4
-#define static 
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-uniform vec4 outputSize;
-uniform int phase;
-
-in Vertex {
-   vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-// TWEAKS start
-
-// use delay line technique
-// without delay line technique, color would interleave
-// to avoid this, set HueRotation to zero.
-#define USE_DELAY_LINE
-
-// use this if you need to swap even/odd V sign.
-// sign of V changes each scanline
-// so if some scanline is positive, then next is negative
-// and if you want to match picture
-// to actual running PAL NES on TV
-// you may want to have this option, to change signs
-// if they don't match
-//#define SWAP_VSIGN
-
-// rough simulation of scanlines
-// better if you use additional shader instead
-// if you still use it, make sure that SizeY
-// is at least twice lower than output height
-#define USE_SCANLINES // FIXME: scanlines are broken and I'm too lazy to fix it right now
-
-// to change gamma of virtual TV from 2.2 to something else
-#define USE_GAMMA
-
-// use sampled version. it's much more slower version of shader.
-// because it is computing x4 more values. NOT RECOMMENDED.
-//#define USE_SAMPLED
-
-#ifndef PARAMETER_UNIFORM
-// NTSC standard gamma = 2.2
-// PAL standard gamma = 2.8
-// according to many sources, very unlikely gamma of TV is 2.8
-// most likely gamma of PAL TV is in range 2.4-2.5
-const float Gamma_static = 2.8; // gamma of virtual TV
-
-const float Brightness_static = 0.25;
-const float Contrast_static = 1.1;
-const float Saturation_static = 1.1;
-
-const int
-   Ywidth_static = 12,
-   Uwidth_static = 23,
-   Vwidth_static = 23;
-   
-#define Brightness Brightness_static
-#define Gamma Gamma_static
-
-#define Ywidth Ywidth_static
-#define Uwidth Uwidth_static
-#define Vwidth Vwidth_static
-
-#define SCANLINE_MUL (sw.x*dark_scanline+sw.y)
-
-int Mwidth = int(max(float(Ywidth), max(float(Uwidth), float(Vwidth))));
-
-// correct one is -2.5
-// works only with USE_RAW
-const float HueShift = -2.5;
-
-// rotation of hue due to luma level.
-const float HueRotation = 2.;
-
-// touch this only if you know what you doing
-const float Phase_Y = 2.; // fmod(341*10,12)
-const float Phase_One = 0.; // alternating phases.
-const float Phase_Two = 8.;
-
-// screen size, scanlines = y*2; y one field, and y other field.
-const int SizeX = 256;
-const int SizeY = 240;
-
-// count of pixels of virtual TV.
-// value close to 1000 produce small artifacts
-const int TV_Pixels = 400;
-
-const float dark_scanline = 0.5; // half
-#endif
-
-// this is using following matrixes.
-// it provides more scientific approach
-// by conversion into linear XYZ space
-// and back to sRGB.
-// it's using Gamma setting too.
-// define USE_GAMMA is not required.
-#define USE_COLORIMETRY
-
-const float3x3 RGB_to_XYZ =
-mat3(
-   0.4306190, 0.3415419, 0.1783091,
-   0.2220379, 0.7066384, 0.0713236,
-   0.0201853, 0.1295504, 0.9390944
-);
-
-const float3x3 XYZ_to_sRGB =
-mat3(
-    3.2406, -1.5372, -0.4986,
-   -0.9689,  1.8758,  0.0415,
-    0.0557, -0.2040,  1.0570
-);
-
-// TWEAKS end
-
-const float YUV_u = 0.492;
-const float YUV_v = 0.877;
-
-const mat3 RGB_to_YUV =
-mat3(
-   float3( 0.299, 0.587, 0.114), //Y
-   float3(-0.299,-0.587, 0.886)*YUV_u, //B-Y
-   float3( 0.701,-0.587,-0.114)*YUV_v //R-Y
-);
-
-#ifdef USE_DELAY_LINE
-const float comb_line = 1.;
-#else
-const float comb_line = 2.;
-#endif
-
-static const float Voltage_0 = 0.518;
-static const float Voltage_1 = 1.962;
-static const float DeltaV = (Voltage_1-Voltage_0);
-
-float RGB_y = Contrast_static/Ywidth_static/DeltaV;
-float RGB_u = comb_line*Contrast_static*Saturation_static/YUV_u/Uwidth_static/DeltaV;
-float RGB_v = comb_line*Contrast_static*Saturation_static/YUV_v/Vwidth_static/DeltaV;
-
-mat3 YUV_to_RGB =
-mat3(
-   float3(1., 1., 1.)*RGB_y,
-   float3(0., -0.114/0.587, 1.)*RGB_u,
-   float3(1., -0.299/0.587, 0.)*RGB_v
-);
-
-const float pi = 3.1415926535897932384626433832795;
-
-float sinn(float x)
-{
-   return sin(/*fmod(x,24)*/x*(pi*2./24.));
-}
-
-float coss(float x)
-{
-   return cos(/*fmod(x,24)*/x*(pi*2./24.));
-}
-
-float3 monitor(sampler2D tex, float2 p)
-{
-   float2 size = sourceSize[0].xy;//float2(SizeX,SizeY);
-   // align vertical coord to center of texel
-   float2 uv = float2(
-
-      p.x,
-
-      (floor(p.y*sourceSize[0].y)+0.5)/sourceSize[0].y);
-#ifdef USE_DELAY_LINE
-   float2 sh = (sourceSize[0].xy/sourceSize[0].xy/size)*float2(14./10.,-1.0);
-#endif
-   float2 pc = uv*sourceSize[0].xy/sourceSize[0].xy*size*float2(10.,1.);
-   float alpha = dot(floor(float2(pc.x,pc.y)),float2(2.,Phase_Y*2.));
-   alpha += Phase_One*2.;
-
-   // 1/size.x of screen in uv coords = sourceSize[0].x/sourceSize[0].x/size.x;
-   // then 1/10*size.x of screen:
-   float ustep = sourceSize[0].x/sourceSize[0].x/size.x/10.;
-
-   float border = sourceSize[0].x/sourceSize[0].x;
-   float ss = 2.0;
-#ifdef SWAP_VSIGN
-#define PAL_SWITCH(A) A < 1.
-#else
-#define PAL_SWITCH(A) A > 1.
-#endif
-   if (PAL_SWITCH(fmod(uv.y*sourceSize[0].y/sourceSize[0].y*size.y,2.0)))
-   {
-      // cos(pi-alpha) = -cos(alpha)
-      // sin(pi-alpha) = sin(alpha)
-      // pi - alpha
-      alpha = -alpha+12012.0;
-      ss = -2.0;
-   }
-   
-   float ysum = 0., usum = 0., vsum = 0.;
-   for (int i=0; i<Mwidth; ++i)
-   {
-      float4 res = texture(tex, uv);
-      float3 yuv = mul(RGB_to_YUV, res.xyz);
-      float a1 = alpha+(HueShift+2.5)*2.-yuv.x*ss*HueRotation;
-      float sig = yuv.x+dot(yuv.yz,sign(float2(sinn(a1),coss(a1))));
-#ifdef USE_DELAY_LINE
-      float4 res1 = texture(tex, uv+sh);
-      float3 yuv1 = mul(RGB_to_YUV, res1.xyz);
-      float a2 = (HueShift+2.5)*2.+12012.0-alpha+yuv.x*ss*HueRotation;
-      float sig1 = yuv1.x+dot(yuv1.yz,sign(float2(sinn(a2),coss(a2))));
-#endif
-      if (i < Ywidth)
-         ysum += sig;
-
-#ifdef USE_DELAY_LINE
-      if (i < Uwidth)
-         usum += (sig+sig1)*sinn(alpha);
-      if (i < Vwidth)
-         vsum += (sig-sig1)*coss(alpha);
-#else
-      if (i < Uwidth)
-         usum += sig*sinn(alpha);
-      if (i < Vwidth)
-         vsum += sig*coss(alpha);
-#endif
-      alpha -= ss;
-      uv.x -= ustep;
-   }
-   
-   float3 rgb = mul(float3(ysum+Brightness*Ywidth_static,usum,vsum), YUV_to_RGB);
-#if defined(USE_GAMMA) && !defined(USE_COLORIMETRY)
-   float3 rgb1 = saturate(rgb);
-   rgb = pow(rgb1, Gamma/2.2);
-#endif
-
-#ifdef USE_COLORIMETRY
-   float3 rgb1 = saturate(rgb);
-   rgb = pow(rgb1, float3(Gamma, Gamma, Gamma));
-#endif
-
-#if (defined(USE_SCANLINES))
-   float2 q = (p*sourceSize[0].xy/sourceSize[0].xy)*float2(TV_Pixels*3.,size.y*2.);
-#endif
-
-#ifdef USE_SCANLINES
-   float scanlines = size.y * outputSize.z;
-   float top = fmod(q.y-0.5*scanlines*2.,2.);
-   float bottom = top+frac(scanlines)*2.;
-   float2 sw = saturate(min(float2(1.,2.),float2(bottom, bottom))
-      -max(float2(0.,1.),float2(top)))
-      +saturate(min(float2(3.,4.),float2(bottom, bottom))
-      -max(float2(2.,3.),float2(top)))
-      +floor(scanlines);
-
-   rgb = rgb*SCANLINE_MUL/(sw.x+sw.y);
-   
-   /*
-   //old stupid method
-   float z =
-#ifdef ANIMATE_SCANLINE
-   fmod(phase,2.0)+
-#endif
-      0.5;
-
-   if (abs(fmod(q.y+0.5,2)-z)<0.5)
-      rgb *= dark_scanline;
-*/
-#endif
-
-   // size of pixel screen in texture coords:
-   //float output_pixel_size = sourceSize[0].x/(outputSize.x*sourceSize[0].x);
-
-   // correctness check
-   //if (fmod(p.x*output_pixel_size,2.0) < 1.0)
-   //   rgb = float3(0.,0.,0.);
-
-#ifdef USE_COLORIMETRY
-   float3 xyz1 = mul(RGB_to_XYZ,rgb);
-   float3 srgb = saturate(mul(XYZ_to_sRGB,xyz1));
-   float3 a1 = 12.92*srgb;
-   float3 a2 = 1.055*pow(srgb,float3(1./2.4))-0.055;
-   float3 ssrgb;
-   ssrgb.x = (srgb.x<0.0031308?a1.x:a2.x);
-   ssrgb.y = (srgb.y<0.0031308?a1.y:a2.y);
-   ssrgb.z = (srgb.z<0.0031308?a1.z:a2.z);
-   return ssrgb;
-#else
-   return rgb;
-#endif
-}
-
-// pos (left corner, sample size)
-float4 monitor_sample(sampler2D tex, float2 p, float2 sample_)
-{
-   // linear interpolation was...
-   // now other thing.
-   // http://imgur.com/m8Z8trV
-   // AT LAST IT WORKS!!!!
-   // going to check in retroarch...
-   float2 size = sourceSize[0].xy;
-   float2 next = float2(.25,1.)/size;
-   float2 f = frac(float2(4.,1.)*size*p);
-   sample_ *= float2(4.,1.)*size;
-   float2 l;
-   float2 r;
-   if (f.x+sample_.x < 1.)
-   {
-      l.x = f.x+sample_.x;
-      r.x = 0.;
-   }
-   else
-   {
-      l.x = 1.-f.x;
-      r.x = min(1.,f.x+sample_.x-1.);
-   }
-   if (f.y+sample_.y < 1.)
-   {
-      l.y = f.y+sample_.y;
-      r.y = 0.;
-   }
-   else
-   {
-      l.y = 1.-f.y;
-      r.y = min(1.,f.y+sample_.y-1.);
-   }
-   float3 top = mix(monitor(tex, p), monitor(tex, p+float2(next.x,0.)), r.x/(l.x+r.x));
-   float3 bottom = mix(monitor(tex, p+float2(0.,next.y)), monitor(tex, p+next), r.x/(l.x+r.x));
-   return float4(mix(top,bottom, r.y/(l.y+r.y)),1.0);
-}
-
-void main() {
-#ifdef USE_SAMPLED
-   fragColor = vec4(monitor_sample(source[0], texCoord, outputSize.zw).rgb, 1.0);
-#else
-   fragColor = float4(monitor(source[0], texCoord), 1.);
-#endif
-}

ares/Shaders/Phosphorish.shader/manifest.bml

@@ -1,2 +0,0 @@
-program
-  fragment: phosphorish.fs

ares/Shaders/Phosphorish.shader/phosphorish.fs

@@ -1,56 +0,0 @@
-/*    Phosphorish
-
-    Copyright (C) 2011 Themaister
-
-    This program is licensed in the public domain
-*/
-
-#version 150
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-uniform vec4 targetSize;
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-      vec3 to_focus(float pixel)
-      {
-         pixel = mod(pixel + 3.0, 3.0);
-         if (pixel >= 2.0) // Blue
-            return vec3(pixel - 2.0, 0.0, 3.0 - pixel);
-         else if (pixel >= 1.0) // Green
-            return vec3(0.0, 2.0 - pixel, pixel - 1.0);
-         else // Red
-            return vec3(1.0 - pixel, pixel, 0.0);
-      }
-
-      void main()
-      {
-         float y = mod(texCoord.y * sourceSize[0].y, 1.0);
-         float intensity = exp(-0.2 * y);
-
-         vec2 one_x = vec2(1.0 / (3.0 * sourceSize[0].x), 0.0);
-
-         vec3 color = texture(source[0], texCoord.xy - 0.0 * one_x).rgb;
-         vec3 color_prev = texture(source[0], texCoord.xy - 1.0 * one_x).rgb;
-         vec3 color_prev_prev = texture(source[0], texCoord.xy - 2.0 * one_x).rgb;
-
-         float pixel_x = 3.0 * texCoord.x * sourceSize[0].x;
-
-         vec3 focus = to_focus(pixel_x - 0.0);
-         vec3 focus_prev = to_focus(pixel_x - 1.0);
-         vec3 focus_prev_prev = to_focus(pixel_x - 2.0);
-
-         vec3 result =
-            0.8 * color * focus +
-            0.6 * color_prev * focus_prev +
-            0.3 * color_prev_prev * focus_prev_prev;
-
-         result = 2.3 * pow(result, vec3(1.4));
-
-         fragColor = vec4(intensity * result, 1.0);
-      }

ares/Shaders/Scanline.shader/manifest.bml

@@ -1,4 +0,0 @@
-program
-  filter: linear
-  wrap: border
-  fragment: scanline.fs

ares/Shaders/Scanline.shader/scanline.fs

@@ -1,20 +0,0 @@
-#version 150
-
-uniform sampler2D source[];
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-void main() {
-  vec4 rgba = texture(source[0], texCoord);
-  vec4 intensity;
-  if(fract(gl_FragCoord.y * (0.5 * 4.0 / 3.0)) > 0.5) {
-    intensity = vec4(0);
-  } else {
-    intensity = smoothstep(0.2, 0.8, rgba) + normalize(rgba);
-  }
-  fragColor = intensity * -0.25 + rgba * 1.1;
-}

ares/Shaders/Sharp-Bilinear.shader/manifest.bml

@@ -1,8 +0,0 @@
-input
-  filter: linear
-
-program
-  fragment: sharp-bilinear.fs
-  
-output
-  filter: linear

ares/Shaders/Sharp-Bilinear.shader/sharp-bilinear.fs

@@ -1,33 +0,0 @@
-#version 150
-
-// Sharp Bilinear
-// Author: Themaister
-// License: Public Domain
-
-uniform sampler2D source[];
-uniform vec4 sourceSize[];
-uniform vec4 targetSize;
-
-in Vertex {
-  vec2 texCoord;
-};
-
-out vec4 fragColor;
-
-void main() {
-float prescale = floor(targetSize.y / sourceSize[0].y);
-   vec2 texel = texCoord.xy * sourceSize[0].xy;
-   vec2 texel_floored = floor(texel);
-   vec2 s = fract(texel);
-   float region_range = 0.5 - 0.5 / prescale;
-
-   // Figure out where in the texel to sample to get correct pre-scaled bilinear.
-   // Uses the hardware bilinear interpolator to avoid having to sample 4 times manually.
-
-   vec2 center_dist = s - 0.5;
-   vec2 f = (center_dist - clamp(center_dist, -region_range, region_range)) * prescale + 0.5;
-
-   vec2 mod_texel = texel_floored + f;
-    
-   fragColor = texture(source[0], mod_texel / sourceSize[0].xy);;
-}

ares/System/MSX/Keyboard/Japanese/layout.bml

@@ -1,122 +0,0 @@
-layout
-  name: Japanese
-
-  //row 0
-  key: 0 わ を
-  key: 1 ! ぬ
-  key: 2 " ふ
-  key: 3 # あ ぁ
-  key: 4 $ う ぅ
-  key: 5 % え ぇ
-  key: 6 & お ぉ
-  key: 7 ’ や ゃ
-
-  //row 1
-  key: 8 ( ゆ ゅ
-  key: 9 ) よ ょ
-  key: - = ほ
-  key: ^ ~ へ
-  key: ¥ | ー
-  key: @ ‘ "
-  key: [ { 。
-  key: ; + れ
-
-  //row 2
-  key: : * け
-  key: ] } む
-  key: , < ね `
-  key: . > る 。
-  key: / ? め .
-  key: - ろ
-  key: A ち
-  key: B こ
-
-  //row 3
-  key: C そ
-  key: D し
-  key: E い ぃ
-  key: F は
-  key: G き
-  key: H く
-  key: I に
-  key: J ま
-
-  //row 4
-  key: K の
-  key: L り
-  key: M も
-  key: N み
-  key: O ら
-  key: P せ
-  key: Q た
-  key: R す
-
-  //row 5
-  key: S と
-  key: T か
-  key: U な
-  key: V ひ
-  key: W て
-  key: X さ
-  key: Y ん
-  key: Z つ っ
-
-  //row 6
-  key: SHIFT
-  key: CTRL
-  key: GRAPH
-  key: CAPS
-  key: かな
-  key: F1 F6
-  key: F2 F7
-  key: F3 F8
-
-  //row 7
-  key: F4 F9
-  key: F5 F10
-  key: ESC
-  key: TAB
-  key: STOP
-  key: BS
-  key: SELECT
-  key: RETURN
-
-  //row 8
-  key: SPACE
-  key: CLS/HOME
-  key: INS
-  key: DEL
-  key: ←
-  key: ↑
-  key: ↓
-  key: →
-
-  //row 9
-  key: *
-  key: +
-  key: /
-  key: 0
-  key: 1
-  key: 2
-  key: 3
-  key: 4
-
-  //row 10
-  key: 5
-  key: 6
-  key: 7
-  key: 8
-  key: 9
-  key: -
-  key: ,
-  key: .
-
-  //row 11
-  key:
-  key: 実行
-  key:
-  key: 取消
-  key:
-  key:
-  key:
-  key:

ares/System/MSX2/Keyboard/Japanese/layout.bml

@@ -1,122 +0,0 @@
-layout
-  name: Japanese
-
-  //row 0
-  key: 0 わ を
-  key: 1 ! ぬ
-  key: 2 " ふ
-  key: 3 # あ ぁ
-  key: 4 $ う ぅ
-  key: 5 % え ぇ
-  key: 6 & お ぉ
-  key: 7 ’ や ゃ
-
-  //row 1
-  key: 8 ( ゆ ゅ
-  key: 9 ) よ ょ
-  key: - = ほ
-  key: ^ ~ へ
-  key: ¥ | ー
-  key: @ ‘ "
-  key: [ { 。
-  key: ; + れ
-
-  //row 2
-  key: : * け
-  key: ] } む
-  key: , < ね `
-  key: . > る 。
-  key: / ? め .
-  key: - ろ
-  key: A ち
-  key: B こ
-
-  //row 3
-  key: C そ
-  key: D し
-  key: E い ぃ
-  key: F は
-  key: G き
-  key: H く
-  key: I に
-  key: J ま
-
-  //row 4
-  key: K の
-  key: L り
-  key: M も
-  key: N み
-  key: O ら
-  key: P せ
-  key: Q た
-  key: R す
-
-  //row 5
-  key: S と
-  key: T か
-  key: U な
-  key: V ひ
-  key: W て
-  key: X さ
-  key: Y ん
-  key: Z つ っ
-
-  //row 6
-  key: SHIFT
-  key: CTRL
-  key: GRAPH
-  key: CAPS
-  key: かな
-  key: F1 F6
-  key: F2 F7
-  key: F3 F8
-
-  //row 7
-  key: F4 F9
-  key: F5 F10
-  key: ESC
-  key: TAB
-  key: STOP
-  key: BS
-  key: SELECT
-  key: RETURN
-
-  //row 8
-  key: SPACE
-  key: CLS/HOME
-  key: INS
-  key: DEL
-  key: ←
-  key: ↑
-  key: ↓
-  key: →
-
-  //row 9
-  key: *
-  key: +
-  key: /
-  key: 0
-  key: 1
-  key: 2
-  key: 3
-  key: 4
-
-  //row 10
-  key: 5
-  key: 6
-  key: 7
-  key: 8
-  key: 9
-  key: -
-  key: ,
-  key: .
-
-  //row 11
-  key:
-  key: 実行
-  key:
-  key: 取消
-  key:
-  key:
-  key:
-  key:

ares/System/Super Famicom/boards.bml

@@ -1,970 +0,0 @@
-database
-  revision: 2020-11-09
-
-//Boards (Production)
-
-database
-  revision: 2020-01-21
-
-board: BANDAI-PT-923
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  slot type=SufamiTurbo
-    rom
-      map address=20-3f,a0-bf:8000-ffff mask=0x8000
-    ram
-      map address=60-6f,e0-ef:0000-ffff
-  slot type=SufamiTurbo
-    rom
-      map address=40-5f,c0-df:0000-ffff mask=0x8000
-    ram
-      map address=70-7d,f0-ff:0000-ffff
-
-board: BSC-1A5B9P-01
-  memory type=RAM content=Save
-    map address=10-17:5000-5fff mask=0xf000
-  processor identifier=MCC
-    map address=00-0f:5000-5fff
-    mcu
-      map address=00-3f,80-bf:8000-ffff
-      map address=40-7d,c0-ff:0000-ffff
-      map address=20-3f,a0-bf:6000-7fff
-      memory type=ROM content=Program
-      memory type=RAM content=Download
-      slot type=BSMemory
-
-board: BSC-1A5M-02
-  memory type=ROM content=Program
-    map address=00-1f:8000-ffff mask=0xe08000 base=0x000000
-    map address=20-3f:8000-ffff mask=0xe08000 base=0x100000
-    map address=80-9f:8000-ffff mask=0xe08000 base=0x200000
-    map address=a0-bf:8000-ffff mask=0xe08000 base=0x100000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-  slot type=BSMemory
-    map address=c0-ef:0000-ffff
-
-board: BSC-1A7M-(01,10)
-  memory type=ROM content=Program
-    map address=00-1f:8000-ffff mask=0xe08000 base=0x000000
-    map address=20-3f:8000-ffff mask=0xe08000 base=0x100000
-    map address=80-9f:8000-ffff mask=0xe08000 base=0x200000
-    map address=a0-bf:8000-ffff mask=0xe08000 base=0x100000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-  slot type=BSMemory
-    map address=c0-ef:0000-ffff
-
-board: BSC-1J3M-01
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff
-    map address=40-5f,c0-df:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-  slot type=BSMemory
-    map address=20-3f,a0-bf:8000-ffff
-    map address=60-7d,e0-ff:0000-ffff
-
-board: BSC-1J5M-01
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff
-    map address=40-5f,c0-df:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-  slot type=BSMemory
-    map address=20-3f,a0-bf:8000-ffff
-    map address=60-7d,e0-ff:0000-ffff
-
-board: BSC-1L3B-01
-  processor architecture=W65C816S
-    map address=00-3f,80-bf:2200-23ff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x408000
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-      slot type=BSMemory
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=40-4f:0000-ffff
-    memory type=RAM content=Internal
-      map address=00-3f,80-bf:3000-37ff size=0x800
-
-board: BSC-1L5B-01
-  processor architecture=W65C816S
-    map address=00-3f,80-bf:2200-23ff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x408000
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-      slot type=BSMemory
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=40-4f:0000-ffff
-    memory type=RAM content=Internal
-      map address=00-3f,80-bf:3000-37ff size=0x800
-
-board: SGB-R-10
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-    map address=40-7d,c0-ff:0000-7fff mask=0x8000
-  processor identifier=ICD revision=2
-    map address=00-3f,80-bf:6000-67ff,7000-7fff
-    memory type=ROM content=Boot architecture=SM83
-    slot type=GameBoy
-
-board: SHVC-1A0N-(01,02,10,20,30)
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-    map address=40-7d,c0-ff:0000-7fff mask=0x8000
-
-board: SHVC-1A1B-(04,05,06)
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-ffff
-
-board: SHVC-1A1M-(01,10,11,20)
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-1A3B-(11,12,13)
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-ffff
-
-board: SHVC-1A3B-20
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-1A3M-(10,20,21,30)
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-1A5B-(02,04)
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-ffff
-
-board: SHVC-1A5M-(01,11,20)
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-1B0N-(02,03,10)
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  processor architecture=uPD7725
-    map address=30-3f,b0-bf:8000-ffff mask=0x3fff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: SHVC-1B5B-02
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-ffff
-  processor architecture=uPD7725
-    map address=20-3f,a0-bf:8000-ffff mask=0x3fff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: SHVC-1C0N
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-1f,80-9f:8000-ffff mask=0x8000
-    memory type=RAM content=Save
-      map address=60-7d,e0-ff:0000-ffff
-
-board: SHVC-1C0N5S-01
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-1f,80-9f:8000-ffff mask=0x8000
-    memory type=RAM content=Save
-      map address=60-7d,e0-ff:0000-ffff
-
-board: SHVC-1CA0N5S-01
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-3f,80-bf:8000-ffff mask=0x8000
-      map address=40-5f,c0-df:0000-ffff
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=70-71,f0-f1:0000-ffff
-
-board: SHVC-1CA0N6S-01
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-3f,80-bf:8000-ffff mask=0x8000
-      map address=40-5f,c0-df:0000-ffff
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=70-71,f0-f1:0000-ffff
-
-board: SHVC-1CA6B-01
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-3f,80-bf:8000-ffff mask=0x8000
-      map address=40-5f,c0-df:0000-ffff
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=70-71,f0-f1:0000-ffff
-
-board: SHVC-1CB0N7S-01
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-3f:8000-ffff mask=0x8000
-      map address=40-5f:0000-ffff
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=70-71:0000-ffff
-
-board: SHVC-1CB5B-(01,20)
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-3f:8000-ffff mask=0x8000
-      map address=40-5f:0000-ffff
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=70-71:0000-ffff
-
-board: SHVC-1CB7B-01
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-3f:8000-ffff mask=0x8000
-      map address=40-5f:0000-ffff
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=70-71:0000-ffff
-
-board: SHVC-1DC0N-01
-  processor architecture=HG51BS169
-    map address=00-3f,80-bf:6c00-6fff,7c00-7fff
-    memory type=ROM content=Program
-      map address=00-3f,80-bf:8000-ffff mask=0x8000
-    memory type=RAM content=Save
-      map address=70-77:0000-7fff
-    memory type=ROM content=Data architecture=HG51BS169
-    memory type=RAM content=Data architecture=HG51BS169
-      map address=00-3f,80-bf:6000-6bff,7000-7bff mask=0xf000
-    oscillator
-
-board: SHVC-1DS0B-20
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  processor architecture=uPD96050
-    map address=60-67,e0-e7:0000-3fff
-    memory type=ROM content=Program architecture=uPD96050
-    memory type=ROM content=Data architecture=uPD96050
-    memory type=RAM content=Data architecture=uPD96050
-      map address=68-6f,e8-ef:0000-7fff mask=0x8000
-    oscillator
-
-board: SHVC-1J0N-(01,10,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-
-board: SHVC-1J1M-(11,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-
-board: SHVC-1J3B-01
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-
-board: SHVC-1J3M-(01,11,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-
-board: SHVC-1J5M-(01,11,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-
-board: SHVC-1K0N-01
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  processor architecture=uPD7725
-    map address=00-1f,80-9f:6000-7fff mask=0xfff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: SHVC-1K1B-01
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-  processor architecture=uPD7725
-    map address=00-1f,80-9f:6000-7fff mask=0xfff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: SHVC-1K1X-10
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-  processor architecture=uPD7725
-    map address=00-1f,80-9f:6000-7fff mask=0xfff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: SHVC-1L0N3S-01
-  processor architecture=W65C816S
-    map address=00-3f,80-bf:2200-23ff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x408000
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=40-4f:0000-ffff
-    memory type=RAM content=Internal
-      map address=00-3f,80-bf:3000-37ff size=0x800
-
-board: SHVC-1L3B-(02,11)
-  processor architecture=W65C816S
-    map address=00-3f,80-bf:2200-23ff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x408000
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=40-4f:0000-ffff
-    memory type=RAM content=Internal
-      map address=00-3f,80-bf:3000-37ff size=0x800
-
-board: SHVC-1L5B-(11,20)
-  processor architecture=W65C816S
-    map address=00-3f,80-bf:2200-23ff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x408000
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=40-4f:0000-ffff
-    memory type=RAM content=Internal
-      map address=00-3f,80-bf:3000-37ff size=0x800
-
-board: SHVC-1N0N-(01,10)
-  processor identifier=SDD1
-    map address=00-3f,80-bf:4800-480f
-    mcu
-      map address=00-3f,80-bf:8000-ffff
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-
-board: SHVC-2A0N-01#A
-  memory type=ROM content=Program
-    map address=00-2f,80-af:8000-ffff mask=0x8000
-    map address=40-6f,c0-ef:0000-ffff mask=0x8000
-
-board: SHVC-2A0N-(01,10,11,20)
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-    map address=40-7d,c0-ff:0000-7fff mask=0x8000
-
-board: SHVC-2A1M-01
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-2A3B-01
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-2A3M-01#A
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-2A3M-(01,11,20)
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-2A5M-01
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-2B3B-01
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-  processor architecture=uPD7725
-    map address=60-6f,e0-ef:0000-7fff mask=0x3fff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: SHVC-2DC0N-01
-  processor architecture=HG51BS169
-    map address=00-3f,80-bf:6c00-6fff,7c00-7fff
-    memory type=ROM content=Program
-      map address=00-3f,80-bf:8000-ffff mask=0x8000
-    memory type=RAM content=Save
-      map address=70-77:0000-7fff
-    memory type=ROM content=Data architecture=HG51BS169
-    memory type=RAM content=Data architecture=HG51BS169
-      map address=00-3f,80-bf:6000-6bff,7000-7bff mask=0xf000
-    oscillator
-
-board: SHVC-2E3M-01
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff mask=0x8000
-  processor identifier=OBC1
-    map address=00-3f,80-bf:6000-7fff mask=0xe000
-    map address=70-71,f0-f1:6000-7fff,e000-ffff mask=0xe000
-    memory type=RAM content=Save
-
-board: SHVC-2J0N-(01,10,11,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-
-board: SHVC-2J3M-(01,11,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=10-1f,30-3f,90-9f,b0-bf:6000-7fff mask=0xe000
-
-board: SHVC-2J5M-01
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=10-1f,30-3f,90-9f,b0-bf:6000-7fff mask=0xe000
-
-board: SHVC-3J0N-01
-  memory type=ROM content=Program
-    map address=00-2f,80-af:8000-ffff
-    map address=40-6f,c0-ef:0000-ffff
-
-board: SHVC-BA0N-(01,10)
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-    map address=40-7d,c0-ff:0000-7fff mask=0x8000
-
-board: SHVC-BA1M-01
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-BA3M-(01,10)
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: SHVC-BJ0N-(01,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-
-board: SHVC-BJ1M-(10,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-
-board: SHVC-BJ3M-(10,20)
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-
-board: SHVC-LDH3C-01
-  processor identifier=SPC7110
-    map address=00-3f,80-bf:4800-483f
-    map address=50,58:0000-ffff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x800000
-      map address=c0-ff:0000-ffff mask=0xc00000
-      memory type=ROM content=Program
-      memory type=ROM content=Data
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff mask=0xe000
-  rtc manufacturer=Epson
-    map address=00-3f,80-bf:4840-4842
-    memory type=RTC content=Time manufacturer=Epson
-
-board: SHVC-LJ3M-01
-  memory type=ROM content=Program
-    map address=00-3f:8000-ffff base=0x400000
-    map address=40-7d:0000-ffff base=0x400000
-    map address=80-bf:8000-ffff mask=0xc00000
-    map address=c0-ff:0000-ffff mask=0xc00000
-  memory type=RAM content=Save
-    map address=80-bf:6000-7fff mask=0xe000
-
-board: SHVC-LN3B-01
-  memory type=RAM content=Save
-    map address=00-3f,80-bf:6000-7fff mask=0xe000
-    map address=70-73:0000-ffff
-  processor identifier=SDD1
-    map address=00-3f,80-bf:4800-480f
-    mcu
-      map address=00-3f,80-bf:8000-ffff
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-
-board: SHVC-SGB2-01
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-    map address=40-7d,c0-ff:0000-7fff mask=0x8000
-  processor identifier=ICD revision=2
-    map address=00-3f,80-bf:6000-67ff,7000-7fff
-    memory type=ROM content=Boot architecture=SM83
-    oscillator
-    slot type=GameBoy
-
-board: SHVC-YA0N-01
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-    map address=40-7d,c0-ff:0000-7fff mask=0x8000
-
-board: SHVC-YJ0N-01
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-
-//Boards (Generic)
-
-database
-  revision: 2020-11-09
-
-board: ARM-LOROM-RAM
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-    map address=40-6f,c0-ef:0000-7fff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-ffff
-  processor architecture=ARM6
-    map address=00-3f,80-bf:3800-38ff
-    memory type=ROM content=Program architecture=ARM6
-    memory type=ROM content=Data architecture=ARM6
-    memory type=RAM content=Data architecture=ARM6
-    oscillator
-
-board: BS-HIROM-RAM
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff
-    map address=40-5f,c0-df:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-  slot type=BSMemory
-    map address=20-3f,a0-bf:8000-ffff
-    map address=60-7d,e0-ff:0000-ffff
-
-board: BS-LOROM-RAM
-  memory type=ROM content=Program
-    map address=00-1f:8000-ffff mask=0xe08000 base=0x000000
-    map address=20-3f:8000-ffff mask=0xe08000 base=0x100000
-    map address=80-9f:8000-ffff mask=0xe08000 base=0x200000
-    map address=a0-bf:8000-ffff mask=0xe08000 base=0x100000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-  slot type=BSMemory
-    map address=c0-ef:0000-ffff
-
-board: BS-MCC-RAM
-  memory type=RAM content=Save
-    map address=10-17:5000-5fff mask=0xf000
-  processor identifier=MCC
-    map address=00-0f:5000-5fff
-    mcu
-      map address=00-3f,80-bf:8000-ffff
-      map address=40-7d,c0-ff:0000-ffff
-      map address=20-3f,a0-bf:6000-7fff
-      memory type=ROM content=Program
-      memory type=RAM content=Download
-      slot type=BSMemory
-
-board: BS-SA1-RAM
-  processor architecture=W65C816S
-    map address=00-3f,80-bf:2200-23ff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x408000
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-      slot type=BSMemory
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=40-4f:0000-ffff
-    memory type=RAM content=Internal
-      map address=00-3f,80-bf:3000-37ff size=0x800
-
-board: EVENT-CC92
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-  processor manufacturer=NEC architecture=uPD78214
-    identifier: Campus Challenge '92
-    map address=c0,e0:0000
-    mcu
-      map address=00-1f,80-9f:8000-ffff
-      memory type=ROM content=Program
-      memory type=ROM content=Level-1
-      memory type=ROM content=Level-2
-      memory type=ROM content=Level-3
-    dip
-  processor manufacturer=NEC architecture=uPD7725
-    map address=20-3f,a0-bf:8000-ffff mask=0x7fff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: EVENT-PF94
-  memory type=RAM content=Save
-    map address=30-3f,b0-bf:6000-7fff mask=0xe000
-  processor manufacturer=NEC architecture=uPD78214
-    identifier: PowerFest '94
-    map address=10,20:6000
-    mcu
-      map address=00-3f,80-bf:8000-ffff
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-      memory type=ROM content=Level-1
-      memory type=ROM content=Level-2
-      memory type=ROM content=Level-3
-    dip
-  processor manufacturer=NEC architecture=uPD7725
-    map address=00-0f,80-8f:6000-7fff mask=0xfff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: EXHIROM
-  memory type=ROM content=Program
-    map address=00-3f:8000-ffff base=0x400000
-    map address=40-7d:0000-ffff base=0x400000
-    map address=80-bf:8000-ffff mask=0xc00000
-    map address=c0-ff:0000-ffff mask=0xc00000
-
-board: EXHIROM-RAM
-  memory type=ROM content=Program
-    map address=00-3f:8000-ffff base=0x400000
-    map address=40-7d:0000-ffff base=0x400000
-    map address=80-bf:8000-ffff mask=0xc00000
-    map address=c0-ff:0000-ffff mask=0xc00000
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-
-board: EXHIROM-RAM-SHARPRTC
-  memory type=ROM content=Program
-    map address=00-3f:8000-ffff base=0x400000
-    map address=40-7d:0000-ffff base=0x400000
-    map address=80-bf:8000-ffff mask=0xc00000
-    map address=c0-ff:0000-ffff mask=0xc00000
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-  rtc manufacturer=Sharp
-    map address=00-3f,80-bf:2800-2801
-    memory type=RTC content=Time manufacturer=Sharp
-
-board: EXLOROM
-  memory type=ROM content=Program
-    map address=00-7d:8000-ffff mask=0x808000 base=0x400000
-    map address=80-ff:8000-ffff mask=0x808000 base=0x000000
-
-board: EXLOROM-RAM
-  memory type=ROM content=Program
-    map address=00-7d:8000-ffff mask=0x808000 base=0x400000
-    map address=80-ff:8000-ffff mask=0x808000 base=0x000000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: EXNEC-LOROM
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  processor architecture=uPD96050
-    map address=60-67,e0-e7:0000-3fff
-    memory type=ROM content=Program architecture=uPD96050
-    memory type=ROM content=Data architecture=uPD96050
-    memory type=RAM content=Data architecture=uPD96050
-      map address=68-6f,e8-ef:0000-7fff mask=0x8000
-    oscillator
-
-board: EXSPC7110-RAM-EPSONRTC
-  memory type=ROM content=Expansion
-    map address=40-4f:0000-ffff
-  processor identifier=SPC7110
-    map address=00-3f,80-bf:4800-483f
-    map address=50,58:0000-ffff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x800000
-      map address=c0-ff:0000-ffff mask=0xc00000
-      memory type=ROM content=Program
-      memory type=ROM content=Data
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff mask=0xe000
-  rtc manufacturer=Epson
-    map address=00-3f,80-bf:4840-4842
-    memory type=RTC content=Time manufacturer=Epson
-
-board: GB-LOROM
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-    map address=40-7d,c0-ff:0000-7fff mask=0x8000
-  processor identifier=ICD revision=2
-    map address=00-3f,80-bf:6000-67ff,7000-7fff
-    memory type=ROM content=Boot architecture=SM83
-    oscillator
-    slot type=GameBoy
-
-board: GSU-RAM
-  processor architecture=GSU
-    map address=00-3f,80-bf:3000-34ff
-    memory type=ROM content=Program
-      map address=00-3f,80-bf:8000-ffff mask=0x8000
-      map address=40-5f,c0-df:0000-ffff
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=70-71,f0-f1:0000-ffff
-
-board: HIROM
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-
-board: HIROM-RAM
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-
-board: HITACHI-LOROM
-  processor architecture=HG51BS169
-    map address=00-3f,80-bf:6c00-6fff,7c00-7fff
-    memory type=ROM content=Program
-      map address=00-3f,80-bf:8000-ffff mask=0x8000
-    memory type=RAM content=Save
-      map address=70-77:0000-7fff
-    memory type=ROM content=Data architecture=HG51BS169
-    memory type=RAM content=Data architecture=HG51BS169
-      map address=00-3f,80-bf:6000-6bff,7000-7bff mask=0xf000
-    oscillator
-
-board: LOROM
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-
-board: LOROM-RAM
-  memory type=ROM content=Program
-    map address=00-7d,80-ff:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-
-board: LOROM-RAM#A
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-ffff mask=0x8000
-
-board: NEC-HIROM
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  processor architecture=uPD7725
-    map address=00-1f,80-9f:6000-7fff mask=0xfff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: NEC-HIROM-RAM
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff
-    map address=40-7d,c0-ff:0000-ffff
-  memory type=RAM content=Save
-    map address=20-3f,a0-bf:6000-7fff mask=0xe000
-  processor architecture=uPD7725
-    map address=00-1f,80-9f:6000-7fff mask=0xfff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: NEC-LOROM
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  processor architecture=uPD7725
-    map address=30-3f,b0-bf:8000-ffff mask=0x3fff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: NEC-LOROM-RAM
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-7fff mask=0x8000
-  processor architecture=uPD7725
-    map address=60-6f,e0-ef:0000-7fff mask=0x3fff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: NEC-LOROM-RAM#A
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  memory type=RAM content=Save
-    map address=70-7d,f0-ff:0000-ffff
-  processor architecture=uPD7725
-    map address=20-3f,a0-bf:8000-ffff mask=0x3fff
-    memory type=ROM content=Program architecture=uPD7725
-    memory type=ROM content=Data architecture=uPD7725
-    memory type=RAM content=Data architecture=uPD7725
-    oscillator
-
-board: OBC1-LOROM-RAM
-  memory type=ROM content=Program
-    map address=00-3f,80-bf:8000-ffff mask=0x8000
-  processor identifier=OBC1
-    map address=00-3f,80-bf:6000-7fff mask=0xe000
-    map address=70-71,f0-f1:6000-7fff,e000-ffff mask=0xe000
-    memory type=RAM content=Save
-
-board: SA1
-  processor architecture=W65C816S
-    map address=00-3f,80-bf:2200-23ff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x408000
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-    memory type=RAM content=Internal
-      map address=00-3f,80-bf:3000-37ff size=0x800
-
-board: SA1-RAM
-  processor architecture=W65C816S
-    map address=00-3f,80-bf:2200-23ff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x408000
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff size=0x2000
-      map address=40-4f:0000-ffff
-    memory type=RAM content=Internal
-      map address=00-3f,80-bf:3000-37ff size=0x800
-
-board: SDD1
-  processor identifier=SDD1
-    map address=00-3f,80-bf:4800-480f
-    mcu
-      map address=00-3f,80-bf:8000-ffff
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-
-board: SDD1-RAM
-  memory type=RAM content=Save
-    map address=00-3f,80-bf:6000-7fff mask=0xe000
-    map address=70-73:0000-ffff mask=0x8000
-  processor identifier=SDD1
-    map address=00-3f,80-bf:4800-480f
-    mcu
-      map address=00-3f,80-bf:8000-ffff
-      map address=c0-ff:0000-ffff
-      memory type=ROM content=Program
-
-board: SPC7110-RAM
-  processor identifier=SPC7110
-    map address=00-3f,80-bf:4800-483f
-    map address=50,58:0000-ffff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x800000
-      map address=c0-ff:0000-ffff mask=0xc00000
-      memory type=ROM content=Program
-      memory type=ROM content=Data
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff mask=0xe000
-
-board: SPC7110-RAM-EPSONRTC
-  processor identifier=SPC7110
-    map address=00-3f,80-bf:4800-483f
-    map address=50,58:0000-ffff
-    mcu
-      map address=00-3f,80-bf:8000-ffff mask=0x800000
-      map address=c0-ff:0000-ffff mask=0xc00000
-      memory type=ROM content=Program
-      memory type=ROM content=Data
-    memory type=RAM content=Save
-      map address=00-3f,80-bf:6000-7fff mask=0xe000
-  rtc manufacturer=Epson
-    map address=00-3f,80-bf:4840-4842
-    memory type=RTC content=Time manufacturer=Epson
-
-board: ST-LOROM
-  memory type=ROM content=Program
-    map address=00-1f,80-9f:8000-ffff mask=0x8000
-  slot type=SufamiTurbo
-    rom
-      map address=20-3f,a0-bf:8000-ffff mask=0x8000
-    ram
-      map address=60-6f,e0-ef:0000-ffff
-  slot type=SufamiTurbo
-    rom
-      map address=40-5f,c0-df:0000-ffff mask=0x8000
-    ram
-      map address=70-7d,f0-ff:0000-ffff
-

ares/a26/GNUmakefile

@@ -1,15 +0,0 @@
-ares.components += mos6502
-
-ares.objects += ares-a26-system
-ares.objects += ares-a26-controller
-ares.objects += ares-a26-cartridge
-ares.objects += ares-a26-cpu
-ares.objects += ares-a26-tia
-ares.objects += ares-a26-riot
-
-$(object.path)/ares-a26-system.o:     	$(ares.path)/a26/system/system.cpp
-$(object.path)/ares-a26-controller.o: 	$(ares.path)/a26/controller/controller.cpp
-$(object.path)/ares-a26-cartridge.o:  	$(ares.path)/a26/cartridge/cartridge.cpp
-$(object.path)/ares-a26-cpu.o:     		$(ares.path)/a26/cpu/cpu.cpp
-$(object.path)/ares-a26-tia.o:     		$(ares.path)/a26/tia/tia.cpp
-$(object.path)/ares-a26-riot.o:     	$(ares.path)/a26/riot/riot.cpp

ares/a26/a26.hpp

@@ -1,25 +0,0 @@
-#pragma once
-
-#include <ares/ares.hpp>
-
-#include <component/processor/mos6502/mos6502.hpp>
-
-namespace ares::Atari2600 {
-  #include <ares/inline.hpp>
-  auto enumerate() -> vector<string>;
-  auto load(Node::System& node, string name) -> bool;
-
-  struct Region {
-    static inline auto NTSC() -> bool;
-    static inline auto PAL() -> bool;
-    static inline auto SECAM() -> bool;
-  };
-
-  #include <a26/controller/controller.hpp>
-  #include <a26/system/system.hpp>
-  #include <a26/cartridge/cartridge.hpp>
-  #include <a26/cpu/cpu.hpp>
-  #include <a26/tia/tia.hpp>
-  #include <a26/riot/riot.hpp>
-}
-

ares/a26/cartridge/board/atari16k.cpp

@@ -1,58 +0,0 @@
-struct Atari16k : Interface {
-  using Interface::Interface;
-  Memory::Readable<n8> rom;
-  Memory::Writable<n8> ram;
-  n2 bank;
-  bool hasRam;
-
-  auto load() -> void override {
-    Interface::load(rom, "program.rom");
-  }
-
-  auto save() -> void override {
-  }
-
-  auto unload() -> void override {
-  }
-
-  auto read(n16 address) -> n8 override {
-    if(address == 0x1ff6) bank = 0;
-    if(address == 0x1ff7) bank = 1;
-    if(address == 0x1ff8) bank = 2;
-    if(address == 0x1ff9) bank = 3;
-
-    if(address.bit(12)) {
-      if(hasRam && address >= 0x1080 && address <= 0x10ff) return ram.read(address & 0x7f);
-      return rom.read((bank * 0x1000) + (address & 0xfff));
-    }
-
-    return 0xff;
-  }
-   
-  auto write(n16 address, n8 data) -> bool override {
-    if(address == 0x1ff6) bank = 0;
-    if(address == 0x1ff7) bank = 1;
-    if(address == 0x1ff8) bank = 2;
-    if(address == 0x1ff9) bank = 3;
-
-    if(address >= 0x1000 && address <= 0x107f) {
-      hasRam = true;
-      ram.write(address & 0x7f, data);
-      return true;
-    }
-
-    return false;
-  }
-
-  auto power() -> void override {
-    bank = 0;
-    hasRam = 0;
-    ram.allocate(128);
-  }
-
-  auto serialize(serializer& s) -> void override {
-    s(bank);
-    s(hasRam);
-    s(ram);
-  }
-};

ares/a26/cartridge/board/atari32k.cpp

@@ -1,66 +0,0 @@
-struct Atari32k : Interface {
-  using Interface::Interface;
-  Memory::Readable<n8> rom;
-  Memory::Writable<n8> ram;
-  n3 bank;
-  bool hasRam;
-
-  auto load() -> void override {
-    Interface::load(rom, "program.rom");
-  }
-
-  auto save() -> void override {
-  }
-
-  auto unload() -> void override {
-  }
-
-  auto read(n16 address) -> n8 override {
-    if(address == 0x1ff4) bank = 0;
-    if(address == 0x1ff5) bank = 1;
-    if(address == 0x1ff6) bank = 2;
-    if(address == 0x1ff7) bank = 3;
-    if(address == 0x1ff8) bank = 4;
-    if(address == 0x1ff9) bank = 5;
-    if(address == 0x1ffa) bank = 6;
-    if(address == 0x1ffb) bank = 7;
-
-    if(address.bit(12)) {
-      if(hasRam && address >= 0x1080 && address <= 0x10ff) return ram.read(address & 0x7f);
-      return rom.read((bank * 0x1000) + (address & 0xfff));
-    }
-
-    return 0xff;
-  }
-   
-  auto write(n16 address, n8 data) -> bool override {
-    if(address == 0x1ff4) bank = 0;
-    if(address == 0x1ff5) bank = 1;
-    if(address == 0x1ff6) bank = 2;
-    if(address == 0x1ff7) bank = 3;
-    if(address == 0x1ff8) bank = 4;
-    if(address == 0x1ff9) bank = 5;
-    if(address == 0x1ffa) bank = 6;
-    if(address == 0x1ffb) bank = 7;
-
-    if(address >= 0x1000 && address <= 0x107f) {
-      hasRam = true;
-      ram.write(address & 0x7f, data);
-      return true;
-    }
-
-    return false;
-  }
-
-  auto power() -> void override {
-    bank = 0;
-    hasRam = 0;
-    ram.allocate(128);
-  }
-
-  auto serialize(serializer& s) -> void override {
-    s(bank);
-    s(hasRam);
-    s(ram);
-  }
-};

ares/a26/cartridge/board/atari8k.cpp

@@ -1,54 +0,0 @@
-struct Atari8k : Interface {
-  using Interface::Interface;
-  Memory::Readable<n8> rom;
-  Memory::Writable<n8> ram;
-  n1 bank;
-  bool hasRam;
-
-  auto load() -> void override {
-    Interface::load(rom, "program.rom");
-  }
-
-  auto save() -> void override {
-  }
-
-  auto unload() -> void override {
-  }
-
-  auto read(n16 address) -> n8 override {
-    if(address == 0x1ff8) bank = 0;
-    if(address == 0x1ff9) bank = 1;
-
-    if(address.bit(12)) {
-      if(hasRam && address >= 0x1080 && address <= 0x10ff) return ram.read(address & 0x7f);
-      return rom.read((bank * 0x1000) + (address & 0xfff));
-    }
-
-    return 0xff;
-  }
-   
-  auto write(n16 address, n8 data) -> bool override {
-    if(address == 0x1ff8) bank = 0;
-    if(address == 0x1ff9) bank = 1;
-
-    if(address >= 0x1000 && address <= 0x107f) {
-      hasRam = true;
-      ram.write(address & 0x7f, data);
-      return true;
-    }
-
-    return false;
-  }
-
-  auto power() -> void override {
-    bank = 0;
-    hasRam = 0;
-    ram.allocate(128);
-  }
-
-  auto serialize(serializer& s) -> void override {
-    s(bank);
-    s(hasRam);
-    s(ram);
-  }
-};

ares/a26/cartridge/board/board.cpp

@@ -1,37 +0,0 @@
-namespace Board {
-
-#include "linear.cpp"
-#include "atari8k.cpp"
-#include "atari16k.cpp"
-#include "atari32k.cpp"
-#include "commavid.cpp"
-#include "parker-bros.cpp"
-#include "tigervision.cpp"
-
-auto Interface::load(Memory::Readable<n8>& memory, string name) -> bool {
-  if(auto fp = pak->read(name)) {
-    memory.allocate(fp->size());
-    memory.load(fp);
-    return true;
-  }
-  return false;
-}
-
-auto Interface::load(Memory::Writable<n8>& memory, string name) -> bool {
-  if(auto fp = pak->read(name)) {
-    memory.allocate(fp->size());
-    memory.load(fp);
-    return true;
-  }
-  return false;
-}
-
-auto Interface::save(Memory::Writable<n8>& memory, string name) -> bool {
-  if(auto fp = pak->write(name)) {
-    memory.save(fp);
-    return true;
-  }
-  return false;
-}
-
-}

ares/a26/cartridge/board/board.hpp

@@ -1,23 +0,0 @@
-namespace Board {
-
-struct Interface {
-  VFS::Pak pak;
-
-  Interface(Cartridge& cartridge) : cartridge(cartridge) {}
-  virtual ~Interface() = default;
-  virtual auto load() -> void {}
-  virtual auto save() -> void {}
-  virtual auto unload() -> void {}
-  virtual auto read(n16 address) -> n8 { return 0xff; }
-  virtual auto write(n16 address, n8 data) -> bool { return false; }
-  virtual auto power() -> void {}
-  virtual auto serialize(serializer&) -> void {}
-
-  auto load(Memory::Readable<n8>&, string name) -> bool;
-  auto load(Memory::Writable<n8>&, string name) -> bool;
-  auto save(Memory::Writable<n8>&, string name) -> bool;
-
-  Cartridge& cartridge;
-};
-
-}

ares/a26/cartridge/board/commavid.cpp

@@ -1,41 +0,0 @@
-struct Commavid : Interface {
-  using Interface::Interface;
-  Memory::Readable<n8> rom;
-  Memory::Writable<n8> ram;
-
-  auto load() -> void override {
-    Interface::load(rom, "program.rom");
-  }
-
-  auto save() -> void override {
-  }
-
-  auto unload() -> void override {
-  }
-
-  auto read(n16 address) -> n8 override {
-    if(address.bit(12)) {
-      if(address >= 0x1000 && address <= 0x13ff) return ram.read(address & 0x3ff);
-      return rom.read(address & 0xfff);
-    }
-
-    return 0xff;
-  }
-   
-  auto write(n16 address, n8 data) -> bool override {
-    if(address >= 0x1400 && address <= 0x17ff) {
-      ram.write(address & 0x3ff, data);
-      return true;
-    }
-
-    return false;
-  }
-
-  auto power() -> void override {
-    ram.allocate(1_KiB);
-  }
-
-  auto serialize(serializer& s) -> void override {
-    s(ram);
-  }
-};

ares/a26/cartridge/board/linear.cpp

@@ -1,45 +0,0 @@
-struct Linear : Interface {
-  using Interface::Interface;
-  Memory::Readable<n8> rom;
-  Memory::Writable<n8> ram;
-  bool hasRam;
-
-  auto load() -> void override {
-    Interface::load(rom, "program.rom");
-  }
-
-  auto save() -> void override {
-  }
-
-  auto unload() -> void override {
-  }
-
-  auto read(n16 address) -> n8 override {
-    if(address.bit(12)) {
-      if(hasRam && address >= 0x1080 && address <= 0x10ff) return ram.read(address & 0x7f);
-      return rom.read(address & 0xfff);
-    }
-
-    return 0xff;
-  }
-   
-  auto write(n16 address, n8 data) -> bool override {
-    if(address >= 0x1000 && address <= 0x107f) {
-      hasRam = true;
-      ram.write(address & 0x7f, data);
-      return true;
-    }
-
-    return false;
-  }
-
-  auto power() -> void override {
-    hasRam = 0;
-    ram.allocate(128);
-  }
-
-  auto serialize(serializer& s) -> void override {
-    s(hasRam);
-    s(ram);
-  }
-};

ares/a26/cartridge/board/parker-bros.cpp

@@ -1,51 +0,0 @@
-struct ParkerBros : Interface {
-  using Interface::Interface;
-  Memory::Readable<n8> rom;
-  n3 banks[3];
-
-  auto load() -> void override {
-    Interface::load(rom, "program.rom");
-  }
-
-  auto save() -> void override {
-  }
-
-  auto unload() -> void override {
-  }
-
-  auto read(n16 address) -> n8 override {
-    bankswitch(address);
-
-    if(address.bit(12)) {
-      if(address >= 0x1000 && address <= 0x13ff) return rom.read((banks[0] * 0x400) + (address & 0x3ff));
-      if(address >= 0x1400 && address <= 0x17ff) return rom.read((banks[1] * 0x400) + (address & 0x3ff));
-      if(address >= 0x1800 && address <= 0x1bff) return rom.read((banks[2] * 0x400) + (address & 0x3ff));
-      if(address >= 0x1c00 && address <= 0x1fff) return rom.read((      7  * 0x400) + (address & 0x3ff));
-    }
-
-    return 0xff;
-  }
-   
-  auto write(n16 address, n8 data) -> bool override {
-    bankswitch(address);
-    return false;
-  }
-
-  auto bankswitch(n16 address) -> void {
-    if(address >= 0x1fe0 && address <= 0x1fe7) banks[0] = address - 0x1fe0;
-    if(address >= 0x1fe8 && address <= 0x1fef) banks[1] = address - 0x1fe8;
-    if(address >= 0x1ff0 && address <= 0x1ff7) banks[2] = address - 0x1ff0;
-  }
-
-  auto power() -> void override {
-    banks[0] = 0;
-    banks[1] = 1;
-    banks[2] = 2;
-  }
-
-  auto serialize(serializer& s) -> void override {
-    s(banks[0]);
-    s(banks[1]);
-    s(banks[2]);
-  }
-};

ares/a26/cartridge/board/tigervision.cpp

@@ -1,42 +0,0 @@
-struct Tigervision : Interface {
-  using Interface::Interface;
-  Memory::Readable<n8> rom;
-  n8 bank;
-  n8 nextBank;
-
-  auto load() -> void override {
-    Interface::load(rom, "program.rom");
-  }
-
-  auto save() -> void override {
-  }
-
-  auto unload() -> void override {
-  }
-
-  auto read(n16 address) -> n8 override {
-    if(address.bit(12)) {
-      if(bank != nextBank) bank = nextBank;
-      if(address <= 0x17ff) return rom.read((bank * 0x800) + (address & 0x7ff));
-      return rom.read((rom.size() - 0x800) + (address & 0x7ff));
-    }
-
-    return 0xff;
-  }
-   
-  auto write(n16 address, n8 data) -> bool override {
-    if(address.bit(12) && bank != nextBank) bank = nextBank;
-    if(address <= 0x3f) nextBank = data;
-    return false;
-  }
-
-  auto power() -> void override {
-    bank = 0;
-    nextBank = 0;
-  }
-
-  auto serialize(serializer& s) -> void override {
-    s(bank);
-    s(nextBank);
-  }
-};

ares/a26/cartridge/cartridge.cpp

@@ -1,66 +0,0 @@
-#include <a26/a26.hpp>
-
-namespace ares::Atari2600 {
-
-Cartridge& cartridge = cartridgeSlot.cartridge;
-#include "board/board.cpp"
-#include "slot.cpp"
-#include "serialization.cpp"
-
-auto Cartridge::allocate(Node::Port parent) -> Node::Peripheral {
-  return node = parent->append<Node::Peripheral>(string{system.name(), " Cartridge"});
-}
-
-auto Cartridge::connect() -> void {
-  if(!node->setPak(pak = platform->pak(node))) return;
-
-  information = {};
-  information.title  = pak->attribute("title");
-  information.region = pak->attribute("region");
-  information.board  = pak->attribute("board");
-
-  if(information.board == "Linear") board = new Board::Linear{*this};
-  if(information.board == "Atari8k") board = new Board::Atari8k{*this};
-  if(information.board == "Atari16k") board = new Board::Atari16k{*this};
-  if(information.board == "Atari32k") board = new Board::Atari32k{*this};
-  if(information.board == "Commavid") board = new Board::Commavid{*this};
-  if(information.board == "ParkerBros8k") board = new Board::ParkerBros{*this};
-  if(information.board == "Tigervision") board = new Board::Tigervision{*this};
-
-  if(!board) board = new Board::Interface{*this};
-  board->pak = pak;
-  board->load();
-  power();
-}
-
-auto Cartridge::disconnect() -> void {
-  if(!node || !board) return;
-  board->unload();
-  board->pak.reset();
-  board.reset();
-  node.reset();
-}
-
-auto Cartridge::save() -> void {
-  if(!node) return;
-  if(board) board->save();
-}
-
-auto Cartridge::power() -> void {
-  if(board) board->power();
-}
-
-auto Cartridge::read(n16 address) -> n8 {
-  if(!node) return 0xff;
-  if(board) return board->read(address);
-
-  return 0xff;
-}
-
-auto Cartridge::write(n16 address, n8 data) -> bool {
-  if(!node) return false;
-  if(board) return board->write(address, data);
-  return false;
-}
-
-}

ares/a26/cartridge/cartridge.hpp

@@ -1,36 +0,0 @@
-struct Cartridge;
-#include "board/board.hpp"
-
-struct Cartridge {
-  Node::Peripheral node;
-  VFS::Pak pak;
-
-  auto title() const -> string { return information.title; }
-  auto region() const -> string { return information.region; }
-
-  //cartridge.cpp
-  auto allocate(Node::Port) -> Node::Peripheral;
-  auto connect() -> void;
-  auto disconnect() -> void;
-
-  auto save() -> void;
-  auto power() -> void;
-
-  auto read(n16 address) -> n8;
-  auto write(n16 address, n8 data) -> bool;
-
-  //serialization.cpp
-  auto serialize(serializer&) -> void;
-
-  unique_pointer<Board::Interface> board;
-
-//private:
-  struct Information {
-    string title;
-    string region;
-    string board;
-  } information;
-};
-
-#include "slot.hpp"
-extern Cartridge& cartridge;

ares/a26/cartridge/serialization.cpp

@@ -1,3 +0,0 @@
-auto Cartridge::serialize(serializer& s) -> void {
-  if(board) s(*board);
-}

ares/a26/cartridge/slot.cpp

@@ -1,18 +0,0 @@
-CartridgeSlot cartridgeSlot{"Cartridge Slot"};
-
-CartridgeSlot::CartridgeSlot(string name) : name(name) {
-}
-
-auto CartridgeSlot::load(Node::Object parent) -> void {
-  port = parent->append<Node::Port>(name);
-  port->setFamily(system.name());
-  port->setType("Cartridge");
-  port->setAllocate([&](auto name) { return cartridge.allocate(port); });
-  port->setConnect([&] { return cartridge.connect(); });
-  port->setDisconnect([&] { return cartridge.disconnect(); });
-}
-
-auto CartridgeSlot::unload() -> void {
-  cartridge.disconnect();
-  port = {};
-}