Comment says it all. I just felt that putting some new text in
a separate paragraph allowed us to clearly identify the section
about ELFOSABI_NONE, and the part that talks about the new
ELFOSABI_GNU.
gdb/ChangeLog:
* osabi.c (generic_elf_osabi_sniffer): Minor comment reformatting.
The mapping between Ada tasks, and the underlying threads is
normally maintained by the GNAT runtime under the known_tasks
array. For performance reasons, this array is just a static
array with 10_000 entries in it. However, this is not very
practical in certain environments where memory is limited.
For those environments, the runtime has been enhanced to use
an alternate scheme with a linked list.
This change enhances the Ada tasking support to recognize this
situation and use the correct way of reading the tasks info
based on the the situation.
gdb/ChangeLog (Tristan Gingold)
* ada-tasks.c (KNOWN_TASKS_LIST): New macro.
(tcb_fieldno): Add activation_link field.
(get_known_tasks_addr): Moved and rewritten.
(get_tcb_types_info): Set activation_link field.
(read_known_tasks_array): Add parameter. Rewritten.
(read_known_tasks_list): New function.
(read_known_tasks): New function.
(ada_build_task_list): Call read_known_tasks instead of
read_known_tasks_array.
* ravenscar-thread.c: Add first_task_name constant.
(has_ravenscar_runtime): Check for task list too.
Just some minor cleanup changes in preparation for an upcoming
change...
gdb/ChangeLog (Tristan Gingold)
* ada-tasks.c: Renames fieldno to actb_fieldno.
(ada_get_task_number): Indentation.
(get_tcb_types_info): Remove all parameters. Write directly
the globals.
(ptid_from_atcb_common): Adjust.
(read_atcb): Adjust.
* config/tc-mips.c (append_insn): Make sure DWARF-2 location
information is properly adjusted for branches that get swapped.
gas/testsuite/
* gas/mips/loc-swap.d: New test case for DWARF-2 location with
branch swapping.
* gas/mips/loc-swap-dis.d: Likewise.
* gas/mips/mips16@loc-swap.d: Likewise, MIPS16 version.
* gas/mips/mips16@loc-swap-dis.d: Likewise.
* gas/mips/loc-swap.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
We don't need to read the .eh_frame section from the separate
object files, because this data is already present in the
main executable (it needs to, or the program wouldn't work).
We discovered this investigating a problem with the 'next' command,
which was due to unwind failures, which came from the fact that
the .eh_frame was incorrectly relocated.
gdb/ChangeLog (Tristan Gingold):
* dwarf2-frame.c (dwarf2_build_frame_info): Do not load .eh_frame
section in separate object files.
* options.h (class General_options): Add -f and -F.
* options.cc (General_options::finalize): Fatal error if -f/-F
are used without -shared.
* layout.cc (Layout::finish_dynamic_section): Implement -f/-F.
* gdb.cp/m-static.exp: Call get_compiler_info.
(static const int initialized nowhere): Call setup_xfail for gcc <= 4.4.
* gdb.cp/pr9167.exp (p b): Likewise.
* gdb.cp/temargs.exp: Do not set have_pr_45024_fixed for gcc 4.6.
(test value of P in inner_m, test type of Z in inner_m): Call
setup_xfail for gcc <= 4.5.
PR gold/12952
* resolve.cc (Symbol::override_base_with_special): Don't override
the version if the overriding symbol has a different name.
* dynobj.cc (Versions::add_def): Add dynpool parameter. Change
all callers. If we give an error about an undefined version,
define the base version if necessary.
* dynobj.h (class Versions): Update declaration.
* testsuite/weak_alias_test_5.cc: New file.
* testsuite/weak_alias_test.script: New file.
* testsuite/weak_alias_test_main.cc: Check that versioned_symbol
and versioned_alias have the right value, and call t2.
* testsuite/Makefile.am (weak_alias_test_DEPENDENCIES): Add
weak_alias_test_5.so.
(weak_alias_test_LDADD): Likewise.
(weak_alias_test_5_pic.o, weak_alias_test_5.so): New targets.
* testsuite/Makefile.in: Rebuild.
* configure.ac: Test whether static linking works, setting
the automake conditional HAVE_STATIC.
* testsuite/Makefile.am: Disable tests using -static if
HAVE_STATIC is not true.
* configure, testsuite/Makefile.in: Rebuild.
* ehframe.cc (Eh_frame_hdr::get_fde_pc): Handle DW_EH_PE_datarel.
Assert if we see DW_EH_PE_indirect.
* target.h (Target::ehframe_datarel_base): New function.
(Target::do_ehframe_datarel_base): New target function.
* i386.cc (Target_i386::do_ehframe_datarel_base): New function.
* x86_64.cc (Target_x86_64::do_ehframe_datarel_base): New
function.
* options.h (class General_options): Add
--ld-generated-unwind-info.
* ehframe.cc (Fde::write): Add address parameter. Change all
callers. If associated with PLT, fill in address and size.
(Cie::set_output_offset): Only add merge mapping if there is an
object.
(Cie::write): Add address parameter. Change all callers.
(Eh_frame::add_ehframe_for_plt): New function.
* ehframe.h (class Fde): Update declarations. Move shndx_ and
input_offset_ fields into union u_, with new plt field.
(Fde::Fde): Adjust for new union field.
(Fde::Fde) [Output_data version]: New constructor.
(Fde::add_mapping): Only add merge mapping if there is an object.
(class Cie): Update declarations.
(class Eh_frame): Declare add_ehframe_for_plt.
* layout.cc (Layout::layout_eh_frame): Break out code into
make_eh_frame_section, and call it.
(Layout::make_eh_frame_section): New function.
(Layout::add_eh_frame_for_plt): New function.
* layout.h (class Layout): Update declarations.
* merge.cc (Merge_map::add_mapping): Add assertion.
* i386.cc: Include "dwarf.h".
(class Output_data_plt_i386): Make first_plt_entry,
dyn_first_plt_entry, exec_plt_entry, and dyn_plt_entry const. Add
plt_eh_frame_cie_size, plt_eh_frame_fde_size, plt_eh_frame_cie,
and plt_eh_frame_fde.
(Output_data_plt_i386::Output_data_plt_i386): Align to 16-byte
boundary. Call add_eh_frame_for_plt if appropriate.
* x86_64.cc: Include "dwarf.h".
(class Output_data_plt_x86_64): Align to 16-byte boundary. Make
first_plt_entry, plt_entry and tlsdesc_plt_entry const. Add
plt_eh_frame_cie_size, plt_eh_frame_fde_size, plt_eh_frame_cie,
and plt_eh_frame_fde.
(Output_data_plt_x86_64::init): Call add_eh_frame_for_plt if
appropriate.
The stat syscalls cannot work without a stat map, so declare one that
matches libgloss for virtual environments.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* linespec.c (find_method): Accept the function type automatically only
if it was specified with parameter types.
gdb/testsuite/
* gdb.cp/paren-type.cc: New files.
* gdb.cp/paren-type.exp: New files.
Stop on first linespec terminator instead of eating what we can.
* linespec.c (is_linespec_boundary): New function.
(name_end): Remove function.
(keep_name_info): New parameter on_boundary, replace the body.
(decode_line_1): Provide the parameter to keep_name_info.
(decode_compound): Likewise. Drop the trailing java return type
handling. Twice.
gdb/testsuite/
Stop on first linespec terminator instead of eating what we can.
* gdb.cp/minsym-fallback-main.cc (main): Call also C::operator ().
* gdb.cp/minsym-fallback.cc (C::operator ()): Define.
* gdb.cp/minsym-fallback.exp (break 'C::f()'): Change to ...
(break C::f()): ... this one.
(break C::operator()()): New test.
* gdb.cp/minsym-fallback.h (C::operator ()): Declare.
* gdb.java/jmisc.exp (break jmisc.main(java.lang.String[])int): New
test.
Fall back linespec to minimal symbols.
* linespec.c (decode_line_1): New variable ex, saved_argptr. Protect
decode_compound by TRY_CATCH, fall back on minsyms if it failed.
(find_method, symbol_found): Change error to cplusplus_error.
gdb/testsuite/
Fall back linespec to minimal symbols.
* gdb.base/psymtab.exp (Don't search past end of psymtab.): Update the
error message.
* gdb.cp/cplusfuncs.exp (list foo::operator int*): Likewise.
* gdb.cp/minsym-fallback-main.cc: New file.
* gdb.cp/minsym-fallback.cc: New file.
* gdb.cp/minsym-fallback.exp: New file.
* gdb.cp/minsym-fallback.h: New file.
* dwarf2read.c (check_physname): New variable.
(dwarf2_physname): Prefer DW_AT_linkage_name over dwarf2_compute_name.
(show_check_physname): New function.
(_initialize_dwarf2_read): Add `check-physname' for check_physname.
gdb/doc/
* gdb.texinfo (Debugging Output): Document set debug
check-physname.
gdb/testsuite/
* gdb.base/break-interp.exp (reach_1, test_ld): Allow also the prefix
__GI_.
* gdb.cp/psymtab-parameter.cc (func): Make it a template function.
(f): New function.
* gdb.cp/psymtab-parameter.exp (complete break 'func(): Rename to ...
(complete p 'func<short>(): ... here.
* gdb.dwarf2/dw2-linkage-name-trust-main.cc: New file.
* gdb.dwarf2/dw2-linkage-name-trust.S: New file.
* gdb.dwarf2/dw2-linkage-name-trust.exp: New file.
* gdb.cp/temargs.exp (test type of F in k3_m, test value of F in k3_m):
Make them KFAIL gcc/49546.
This current_oso global was used to store the OSO's symbol table
in order to relocate common symbols. But it is also making the
assumption that all sections are going to be immediately relocated
as macho_add_oso_symfile does:
- Initialize the current_oso
- Use it through symbol_file_add_from_bfd
- Reset the current_oso (to all fields NULL)
What actually happens is that the .debug_frame section gets read
lazily, and thus relocated at a later time. This relocation causes
current_oso.symbol_table to be initialized (see macho_symfile_relocate)
again. And this eventually causes to trip the...
gdb_assert (current_oso.symbol_table == NULL);
...assertion to fail because the symbol_table was never free'ed.
To be complete, this happens because macho_symfile_relocate was
called outside of macho_add_oso_symfile's control, where the
set-global/use/unset-global dance happens.
But it looks like keeping this global around is not necessary, as
this symbol table is only used to relocate the common symbols.
We can do that prior to relocating the rest of the symbols.
gdb/ChangeLog:
* machoread.c (struct macho_oso_data): Delete.
(current_oso): Delete.
(macho_relocate_common_syms): New function, mostly extracted
out of
(macho_add_oso_symfile): Call macho_relocate_common_syms.
Remove code that sets and unset current_oso.
(macho_symfile_relocate): Delete handling of common symbols,
now moved to macho_relocate_common_syms.
It might not be a debugger bug that caused the PT_KILL ptrace operation
to fail. So emit a warning instead, and try to continue.
This patch also tries to handle the case where ptrace return -1,
but left errno set to zero. According to the ptrace man page,
it is possible for some ptrace operations to return -1 in non-error
situations, and to detect those situations, it explains that errno
should be set prior to calling ptrace, and then checked again after.
gdb/ChangeLog:
* darwin-nat.c (darwin_ptrace): Add documentation.
Set errno to zero before calling ptrace. If ptrace returns
-1 and errno is zero, then change then return zero.
(darwin_kill_inferior): Issue a warning instead of triggering
a failed assertion when the PT_KILL ptrace operations returned
nonzero.
When trying to detach from an inferior that we start from the debugger,
GDB prints the following warning:
(gdb) detach
Detaching from program: /[...]/foo, process 74593
warning: Mach error at "/[...]/darwin-nat.c:445" in function "darwin_resume_inferior": (os/kern) failure (0x5)
The warning comes from the following code in darwin_detach:
darwin_resume_inferior (inf);
This is because the process has already been resumed by the
PT_DETACH ptrace operation that has just been performed.
On the other hand, when trying to detach from an inferior that
was started outside of debugger control (thus after having attached
the debugger to that inferior), things go smoothly. That's because
we don't use ptrace to control the process in that case, and so
the resume is perfectly justified.
This patch makes sure that we resume the inferior during the detach
only when we're NOT using ptrace.
gdb/ChangeLog:
* darwin-nat.c (darwin_detach): Call darwin_resume_inferior
only when inf->private->no_ptrace.
Temporary catchpoints on Ada exceptions are now displayed as "Temporary
catchpoint" as opposed to just "Catchpoint". This is cosmetic only, but
in line with what's done for other catchpoints as well as breakpoints.
gdb/ChangeLog:
* ada-lang.c (print_it_exception): Print temporary catchpoints
as "Temporary catchpoint".
(print_mention_exception): Likewise.
gdb/testsuite/ChangeLog:
* gdb.ada/catch_ex.exp: Add temporary catchpoint tests.
