the Autoconf manual.
* configure.in: Call AC_HEADER_DIRENT. Remove dirent.h,
sys/ndir.h, sys/dir.h and ndir.h from call to AC_CHECK_HEADERS.
* configure: Regenerated.
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips1.d: New test.
* gas/mips/elf_arch_mips2.d: New test.
* gas/mips/elf_arch_mips3.d: New test.
* gas/mips/elf_arch_mips4.d: New test.
* gas/mips/elf_arch_mips5.d: New test.
* gas/mips/elf_arch_mips32.d: New test.
* gas/mips/elf_arch_mips32r2.d: New test.
* gas/mips/elf_arch_mips64.d: New test.
* gas/mips/empty.s: New test source file.
* gas/mips/mips.exp: Run new tests.
* gas/mips/elf_ase_mips16.d: Change to use empty.s
* gas/mips/elf_ase_mips16.s: Remove.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
(multilib.ts): ... this. Moved into...
(multilib.out): ... this. Don't use sub-make.
($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
$(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
(configure-build-[+module+], configure-[+module+],
configure-target-[+module+], configure-gcc): ... these. Test
for Makefile existence. Drop config.status from dependencies.
* Makefile.in: Rebuilt.
* configure.in: Move gcc-version-trigger to the end of
ac_configure_args. Add comments to maybedep.tmp and
serdep.tmp. Introduce --disable-serial-configure. Remove
nonopt from baseargs, matching and removing corresponding
whitespace while at it.
* configure: Rebuilt.
(assign_file_positions_for_segments): Only adjust off/voff
for increased alignment in PT_LOAD or PT_NOTE segment,
but adjust p_filesz for .tbss too. in PT_LOAD consider
.tbss to have zero memory size.
(copy_private_bfd_data) [SECTION_SIZE]: Define.
[IS_CONTAINED_BY_VMA, IS_CONTAINED_BY_LMA]: Use it.
[INCLUDE_SECTION_IN_SEGMENT]: Only put SHF_TLS sections
into PT_TLS segment. Never put SHF_TLS sections in
segments other than PT_TLS or PT_LOAD.
* elf64-alpha.c (elf64_alpha_finish_dynamic_sections): Clear .plt
sh_entsize.
(NCN_STRICT_CHECK_TOOL): If program is not found and
value-if-not-found is empty, use ${ncn_tool_prefix}$2 or $2,
depending on whether build != host or not.
(NCN_STRICT_CHECK_TARGET_TOOL): Ditto, with the target prefix.
program_transform_name to standard idiom.
(AUTOGEN, AUTOCONF): Define.
(Makefile.in): Use $(AUTOGEN).
(Makefile): Depend on config.status, and use autoconf-style rule to
build it. Move original commands to...
(config.status): ... this new target.
(configure): Add $(srcdir). Depend on config/acx.m4. Use
$(AUTOCONF).
* Makefile.in: Rebuilt.
* gas/mips/mips.exp: Define the notion of an "architecture data
array," add comments indicating how to add a new architecture and
suggestions for adding new tests. Populate the architecture data
array with many known architectures and convert many tests to
be run for multiple architectures.
(mips_arches): New global array.
(mips_arch_create, mips_arch_list_all, mips_arch_data)
(mips_arch_displayname, mips_arch_properties)
(mips_arch_as_flags, mips_arch_objdump_flags, mips_arch_matches)
(mips_arch_list_matching): New functions to operate on mips_arches.
(run_dump_test_arch, run_dump_test_arches, run_list_test_arch)
(run_list_test_arches): New functions.
(run_list_test): Document and add an optional "test name" argument.
* gas/mips/abs.d: Remove CPU-specific assembler and objdump flags,
and CPU names from test names.
* gas/mips/add.d: Likewise.
* gas/mips/and.d: Likewise.
* gas/mips/dli.d: Likewise.
* gas/mips/jal-empic-elf-2.d: Likewise.
* gas/mips/jal-empic-elf-3.d: Likewise.
* gas/mips/jal-empic-elf.d: Likewise.
* gas/mips/lb-svr4pic.d: Likewise.
* gas/mips/lb.d: Likewise.
* gas/mips/mips32.d: Likewise.
* gas/mips/mips4.d: Likewise.
* gas/mips/mips64.d: Likewise.
* gas/mips/rol-hw.d: Likewise.
* gas/mips/rol.d: Likewise.
* gas/mips/rol64-hw.d: Likewise.
* gas/mips/rol64.d: Likewise.
* gas/mips/elf-jal.d: Likewise. Also, indicate ELF in test name.
* gas/mips/mips64-mdmx.d: Tweak printed name to indicate that this
test uses the -mdmx flag.
* gas/mips/mips64-mips3d.d: Tweak printed name to indicate that
this test uses the -mips3d flag.
* gas/mips/mips64-mips3d-incl.d: New file.
* fhandler_console.cc (fhandler_console::send_winch_maybe): If appropriate,
call tty master function to handle screen size change.
* fhandler_tty.cc (fhandler_tty_master::set_winsize): New function.
(fhandler_tty_master::init): Call set_winsize to set initial screen size.
of console in which tty is operating.
(process_input): Semi-revert previous change. Need to just use current
terminfo settings since this function is running in a thread, blocked when the
terminfo changes.
