bfd/
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_ADD_IMM.
gas/
* tc-arm.c (do_t_add_sub): Use addw/subw when source is PC.
(md_convert_frag): Use correct reloc for add_pc. Use
BFD_RELOC_ARM_T32_ADD_IMM for normal add/sum.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_ADD_IMM.
(arm_force_relocation): Handle BFD_RELOC_ARM_T32_ADD_IMM.
gas/testsuite/
* gas/arm/thumb2_add.d: New test.
* gas/arm/thumb2_add.s: New test.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_X86_64_GOT64, BFD_RELOC_X86_64_GOTPCREL64,
BFD_RELOC_X86_64_GOTPC64, BFD_RELOC_X86_64_GOTPLT64,
BFD_RELOC_X86_64_PLTOFF64.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elf64-x86-64.c (x86_64_elf_howto_table): Correct comment.
Add howtos for above relocs.
(x86_64_reloc_map): Add mappings for new relocs.
(elf64_x86_64_check_relocs): R_X86_64_GOT64, R_X86_64_GOTPCREL64,
R_X86_64_GOTPLT64 need a got entry. R_X86_64_GOTPLT64 also a PLT
entry. R_X86_64_GOTPC64 needs a .got section. R_X86_64_PLTOFF64
needs a PLT entry.
(elf64_x86_64_gc_sweep_hook): Reflect changes from
elf64_x86_64_check_relocs for the new relocs.
(elf64_x86_64_relocate_section): Handle new relocs.
gas/ChangeLog:
* config/tc-i386.c (type_names): Correct placement of 'static'.
(reloc): Map some more relocs to their 64 bit counterpart when
size is 8.
(output_insn): Work around breakage if DEBUG386 is defined.
(output_disp): A BFD_RELOC_64 with GOT_symbol as operand also
needs to be mapped to BFD_RELOC_X86_64_GOTPC64 or
BFD_RELOC_X86_64_GOTPC32. Also x86-64 handles pcrel addressing
different from i386.
(output_imm): Ditto.
(lex_got): Recognize @PLTOFF and @GOTPLT. Make @GOT accept also
Imm64.
(md_convert_frag): Jumps can now be larger than 2GB away, error
out in that case.
(tc_gen_reloc): New relocs are passed through. BFD_RELOC_64
and BFD_RELOC_64_PCREL are mapped to BFD_RELOC_X86_64_GOTPC64.
gas/testsuite/ChangeLog:
* gas/i386/reloc64.s: Accept 64-bit forms.
* gas/i386/reloc64.d: Adjust.
* gas/i386/reloc64.l: Adjust.
include/ChangeLog:
* elf/x86-64.h: Add the new relocations with their official
numbers.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
bfd/
* libbdf.h: Regenerate.
* bfd-in2.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/
* config/tc-arm.c (encode_arm_cp_address): Use
BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
(do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
mode.
(md_assemble): Only allow coprocessor instructions when Thumb-2 is
available.
(cCE, cC3): Define.
(insns): Use them for coprocessor instructions.
(md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
(get_thumb32_insn): New function.
(put_thumb32_insn): New function.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
gas/testsuite/
* gas/arm/vfp-bad_t2.d, gas/arm/vfp-bad_t2.l, arm/vfp-bad_t2.s,
gas/arm/vfp1_t2.d, gas/arm/vfp1_t2.s, gas/arm/vfp1xD_t2.d,
gas/arm/vfp1xD_t2.s, gas/arm/vfp2_t2.d, gas/arm/vfp2_t2.s): New files.
opcodes/
* arm-dis.c (coprocessor_opcodes): New.
(arm_opcodes, thumb32_opcodes): Remove coprocessor insns.
(print_insn_coprocessor): New function.
(print_insn_arm): Use print_insn_coprocessor. Remove coprocessor
format characters.
(print_insn_thumb32): Use print_insn_coprocessor.
(_bfd_elf_provide_symbol): Allow redefinition of weak syms and those
defined in output sections. Call bfd_elf_record_link_assignment.
* bfd-in.h (bfd_elf_record_link_assignment): Update prototype.
* bfd-in2.h: Regenerate.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
