* config/tc-mips.c (hilo_interlocks): Change definition
so that MIPS32, MIPS64 and later ISAs are included, along with
the already-included machines. Update comments.
(RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
(RELAX_USE_SECOND): Bump to 0x10000.
(RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
(mips_macro_warning): New variable.
(md_assemble): Wrap macro expansion in macro_start() and macro_end().
(s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
(relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
of RELAX_ENCODE.
(append_insn): Update mips_macro_warning.sizes.
(macro_start, macro_warning, macro_end): New functions.
(macro_build): Don't emit warnings here.
(macro_build_lui, md_estimate_size_before_relax): ...or here.
(md_convert_frag): Check for cases where one macro alternative
needs a warning and the other doesn't. Emit a warning if the
longer sequence was chosen.
* config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
the first sequence, the size of the second sequence, and a flag
that says whether we should warn.
(RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
(RELAX_FIRST, RELAX_SECOND): New.
(mips_relax): New variable.
(relax_close_frag, relax_start, relax_switch, relax_end): New fns.
(append_insn): Remove "place" argument. Use mips_relax.sequence
rather than "place" to check whether we're expanding the second
alternative of a relaxable macro. Remove redundant check for
branch relaxation. If generating a normal insn, and there
is not enough room in the current frag, call relax_close_frag()
to close it. Update mips_relax.sizes[]. Emit fixups for the
second version of a relaxable macro. Record the first relaxable
fixup in mips_relax. Remove tc_gen_reloc workaround.
(macro_build): Remove all uses of "place". Use mips_relax.sequence
in the same way as in append_insn.
(mips16_macro_build): Remove "place" argument.
(macro_build_lui): As for macro_build. Don't drop the add_symbol
when generating the second version of a relaxable macro.
(load_got_offset, add_got_offset): New functions.
(load_address, macro): Use new relaxation machinery. Remove
tc_gen_reloc workarounds.
(md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
version of a relaxable macro is needed. Return -RELAX_SECOND if the
first version is needed.
(tc_gen_reloc): Remove relaxation handling.
(md_convert_frag): Go through the fixups for a relaxable macro and
mark those that belong to the unneeded alternative as done. If the
second alternative is needed, adjust the fixup addresses to account
for the deleted first alternative.
testsuite/
* gas/mips/elf-rel19.[sd]: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (append_insn): Properly detect variant frags
that preclude swapping of relaxed branches. Correctly swap
instructions between frags when dealing with relaxed branches.
gas/testsuite/
* gas/mips/relax-swap1-mips1.d: New test for branch relaxation
with swapping for MIPS1.
* gas/mips/relax-swap1-mips2.d: New test for branch relaxation
with swapping for MIPS2.
* gas/mips/relax-swap1.l: Stderr output for the new tests.
* gas/mips/relax-swap1.s: Source for the new tests.
* gas/mips/relax-swap2.d: New test for branch likely relaxation
with swapping.
* gas/mips/relax-swap2.l: Stderr output for the new test.
* gas/mips/relax-swap2.s: Source for the new test.
* gas/mips/mips.exp: Run the new tests.
* config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
reloc, reserve space for the delay slot as well as the jalr itself.
gas/testsuite/
* gas/mips/elf-rel18.[sd]: New test.
* gas/mips/mips.exp: Run it.
(cop_interlocks): Check ISA level.
(cop_mem_interlocks): Define.
(reg_needs_delay): Check cop_interlocks rather than
ISA_HAS_COPROC_DELAYS.
(append_insn): Likewise. Use cop_mem_interlocks rather than
directly checking mips_opts.isa.
(mips_emit_delays): Likewise.
* config/tc-ia64.c (unwind): Move next_slot_number and
next_slot_frag to ...
(unw_rec_list): Here.
(free_list_records): Removed.
(output_unw_records): Likewise.
(generate_unwind_image): Make it void.
(alloc_record): Initialize next_slot_number and next_slot_frag.
(slot_index): Take .org, .space and .align into account.
(fixup_unw_records): Don't set slot_number to 0. Use
list->next_slot_number and list->next_slot_frag instead of
unwind.next_slot_number and unwind.next_slot_frag.
(ia64_convert_frag): New.
(generate_unwind_image): Generate a rs_machine_dependent frag
for unwind record.
(emit_one_bundle): Use list->next_slot_number and
list->next_slot_frag instead of unwind.next_slot_number and
unwind.next_slot_frag.
* config/tc-ia64.h (md_convert_frag): Defined as
ia64_convert_frag.
(md_estimate_size_before_relax): Defined as (f)->fr_var.
* elf32-mips.c (elf_mips_howto_table_rel): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc. Use
_bfd_mips_elf_hi16_reloc for R_MIPS_HI16 and R_MIPS_GNU_REL_HI16,
_bfd_mips_elf_lo16_reloc for R_MIPS_LO16 and R_MIPS_GNU_REL_LO16,
and _bfd_mips_elf_got16_reloc for R_MIPS_GOT16. Change rightshift
to 16 for R_MIPS_HI16 and R_MIPS_GNU_REL_HI16.
(mips_elf_generic_reloc, struct mips_hi16, mips_elf_hi16_reloc)
(mips_elf_lo16_reloc, mips_elf_got16_reloc): Delete.
(_bfd_mips_elf32_gprel16_reloc): Remove special case.
(mips_elf_gprel32_reloc, mips32_64bit_reloc): Likewise.
* elf64-mips.c (mips_elf64_howto_table_rel): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc. Use
_bfd_mips_elf_hi16_reloc for R_MIPS_HI16, _bfd_mips_elf_lo16_reloc
for R_MIPS_LO16 and _bfd_mips_elf_got16_reloc for R_MIPS_GOT16.
Change R_MIPS_HI16's rightshift to 16.
(mips_elf64_howto_table_rela): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc.
Use _bfd_mips_elf_generic_reloc for R_MIPS_GOT16 as well.
(mips_elf64_hi16_reloc, mips_elf64_got16_reloc): Delete.
(mips_elf64_shift6_reloc): Remove special case. Use
_bfd_mips_elf_generic_reloc instead of returning bfd_reloc_continue.
* elfn32-mips.c (prev_reloc_section): Delete.
(prev_reloc_address, prev_reloc_addend): Delete.
(elf_mips_howto_table_rel, elf_mips_howto_table_rela): As for
elf64-mips.c
(GET_RELOC_ADDEND, SET_RELOC_ADDEND): Delete.
(mips_elf_generic_reloc, struct mips_hi16, mips_elf_hi16_reloc)
(mips_elf_lo16_reloc, mips_elf_got16_reloc): Delete.
(mips_elf_gprel16_reloc): Delete use of GET_RELOC_ADDEND.
(mips_elf_literal_reloc, mips_elf_gprel32_reloc): Likewise.
(mips16_jump_reloc, mips16_gprel_reloc): Likewise.
(mips_elf_shift6_reloc): Likewise. Delete use of SET_RELOC_ADDEND.
* elfxx-mips.c (_bfd_mips_elf_gprel16_with_gp): Use
_bfd_relocate_contents to install an in-place addend.
(mips_hi16): New structure.
(mips_hi16_list): Moved from elf32-mips.c.
(_bfd_mips_elf_hi16_reloc, _bfd_mips_elf_got16_reloc): New functions.
(_bfd_mips_elf_lo16_reloc, _bfd_mips_elf_generic_reloc): New functions.
(mips_elf_calculate_relocation): Assume addend is unshifted.
(_bfd_mips_elf_relocate_section): Don't apply the howto rightshift
on top of the usual high-part shift. Don't shift the addend right
before calling mips_elf_calculate_relocation.
* elfxx-mips.h (_bfd_mips_elf_hi16_reloc): Declare.
(_bfd_mips_elf_got16_reloc, _bfd_mips_elf_lo16_reloc): Declare.
(_bfd_mips_elf_generic_reloc): Declare.
gas/
* config/tc-mips.c (mips_need_elf_addend_fixup): Delete.
(md_apply_fix3): Remove bfd_install_relocation workarounds.
(tc_gen_reloc): Likewise. Factor handling of pc-relative relocations
and treat fx_addnumber as relative to the relocation address.
gas/testsuite/
* gas/mips/mips16-jalx.d: Use -mabi=o64.
* gas/mips/mips16.d: Likewise.
* gas/mips/elf-rel17.[sd]: New test.
* gas/mips/mips.exp: Run it.
(ctrl_table): Add "flags" keyword and some comments.
(flag_table): Convert to uppercase.
(get_flags_operand): Be case insensitive.
(get_interrupt_operand): Be case insensitive. Support notation
where the inperrupt arguments are separated by commas.
(get_operands): Check whether get_flags_operand consumed all
arguments. Return failure if get_ctrl_operand didn't recognize a
valid control register.
(get_specific): Add case CLASS_CTRL: Test for valid control
register for ldctlb opcode.
(build_bytes): Check for valid control registers.
(s_comm): Split out code to..
(s_comm_internal): ..here. Tidy error returns. Rearrange so that
"name" from input line may be used in more places. Merge code
testing for valid size from elf_common. Merge code from
s_lcomm_internal. Call comm_parse_extra.
(bss_alloc): New function, split out of s_lcomm_internal and
elf_common.
(parse_align): Likewise.
(s_lcomm_internal): Rewrite.
(s_lcomm, s_lcomm_bytes): Use s_comm_internal.
* read.h (bss_alloc, parse_align, s_comm_internal): Declare.
* config/obj-elf.c (elf_common): Split out code to..
(elf_common_parse): ..here. Remove code common to s_comm_internal,
parse_align and bss_alloc. Rearrange and Tidy.
* config/tc-alpha.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Define.
* ppc-opc.c (MO): Make optional.
(RAO, RSO, SHO): New optional forms of RA, RS, SH operands.
(tlbwe): Accept for both PPC403 and BOOKE. Make all operands optional.
gas:
* tc-ppc.c (md_assemble): Rewrite comment about optional operands
to indicate that 'all or none' is also handled. Pluralize a
word in another comment.
gas/testsuite:
* gas/ppc/booke.s: Add two more forms of the mbar instruction
and three forms of the tlbwe instruction.
* gas/ppc/booke.d: Update to match.
* config/tc-mips.c (macro): Switch misordered call to frag_grow()
and setting of tc_fr_offset.
gas/testsuite/
* gas/mips/elf-rel16.[sd]: New test.
* gas/mips/mips.exp: Run it.
* gas/mips/elf-rel-xgot-n32.d: Fix addends for "lw $5,dl1+34($5)".
* gas/mips/elf-rel-xgot-n64.d: Likewise.
* config/tc-sh.c: Add support for sh4a and no-fpu variants,
with appropriate additions to md_show_usage.
* testsuite/gas/sh/basic.exp: Call tests for sh4a.
* testsuite/gas/sh/{err-sh4a-fp.s, err-sh4a.s,
err-sh4al-dsp.s, sh4a-dsp.d, sh4a-dsp.s, sh4a-fp.d,
sh4a-fp.s, sh4a.d, sh4a.s, sh4al-dsp.d, sh4al-dsp.s:
New files, tests for sh4a and related variants.
* doc/c-sh.texi: Document new -isa options.
* doc/c-sh64.texi: Ditto.
* NEWS: Mention new support for sh4a.
(md_apply_fix3): Likewise.
(cc_names): Add alias names for the names generated by the
disassembler.
(get_cc_operand): Be case insensitive.
(get_operands): Improve error handling for cc operands.
(check_operand): Not used, remove.
(md_assemble): Remove unused variable prev_opcode. Skip
whitespace until end-of-line only. Restore *op_end after call to
hash_find.
