comment.
* gdbtypes.h, gdbtypes.c: Use const in decl of
cplus_struct_default, now that pa-gas assembler has been fixed.
* hppah-nat.c: Formatting.
* hppah-tdep.c: Remove lots of useless externs for variables we
don't use.
* (find_unwind_entry): Speed up by using binary search, and a one
entry cache.
* (rp_saved): New routine to see what unwind info says about RP
being saved on the stack frame.
* (frame_saved_pc): Look for prologue to see if we need to
examine the stack for the saved RP or not.
* (init_extra_frame_info): Check for prologue, instead of
framesize to determine if we are frameless or not.
* (frame_chain_valid): Stop backtraces when we run into _start.
* (push_dummy_frame): Reformat to make more readable.
* (find_dummy_frame_regs): ditto.
* (hp_pop_frame): ditto.
* (hp_restore_pc_queue): small cleanup.
* (hp_push_arguments): ditto.
* (pa_do_registers_info): ditto.
* (skip_prologue): New routine created from SKIP_PROLOGUE macro.
* tm-hppa.h: Move contents of SKIP_PROLOGUE into hppah-tdep.c.
* Define FRAME_CHAIN_VALID.
* Turn on BELIEVE_PCC_PROMOTION so that we can access char args
passed to functions.
* paread.c (pa_symtab_read): Use new bfd conventions for
accessing linker symbol table.
* (pa_symfile_init): Access embedded STAB info via BFD section
mechanism and related macros.
debug info. Setup info about linker symbols only, and use
standard bfd fields to hold the info.
* (hppa_object_p): Remove unneeded decls.
* (hppa_new_section_hook): Get rid of most of this.
* libhppa.h (struct hppadata): Remove ten pounds of useless ugly
fat. Remove all knowledge of stabs, remove redundant knowledge of
linker symbols.
* Remove macros for accessing fields which are now gone.
* Handle recursive traps.
* Remove all trap init code. This needs to be done by the
environment.
* (set_mem_fault_trap): Call exceptionHandler() to setup this
trap.
* (handle_exception): See if we are at breakinst, if so, then
advance PC sp that users can just step out of breakpoint().
* (case 'G'): Don't let GDB hack CWP. Also, copy saved regs to
new place if SP has changed.
* (case 's'): Get rid of this, we can't do it yet.
* (case 't'): New command to test any old random feature.
* (case 'r'): New command to reset the system.
* (breakpoint): Add label to breakpoint trap instruction so that
handle_exception() can detect where we are and get past the
breakpoint trivially.
Fri Jan 8 15:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* bfd.c (struct _bfd): Added ecoff_tdata to tdata union.
* targets.c (enum target_flavour): Added bfd_target_ecoff_flavour.
* coff-msym.c: Use DEFUN for function definitons.
* coff-mips.c: Added code to read and print symbols, and to find
line numbers.
* ecoff-ext.h: Added prototypes for ECOFF swapping functions.
* internal.h (internal_scnhdr): Always provide s_align field, not
just on i960.
(internal_reloc): Always provide r_size field, not just on
RS/6000.
* mips.h (_RDATA, _SDATA, _SBSS, _LIT4, _LIT8, STYP_RDATA,
STYP_SDATA, STYP_SBSS, STYP_LIT4, STYP_LIT8): Defined.
(CODE_MASK, MIPS_IS_STAB, MIPS_MARK_STAB, MIPS_UNMARK_STAB,
STABS_SYMBOL): Moved in from gdb/mipsread.c.
Somewhat more could be done.
Fri Jan 8 15:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coffcode.h: Moved many generic functions into coffgen.c. Moved
swapping functions into coffswap.h for ECOFF use. Moved
relocation functions, only used by h8300 and z8k, into reloc16.c.
Added hooks for coffgen.c functions to backend data structure, and
added hook functions. Still more could be done.
* coffswap.h: New file to hold COFF swapping routines.
* coffgen.c: New file to hold generic COFF functions.
* reloc16.c: New file to hold h8300 and z8k specific relocation
functions.
* libcoff-in.h: Added declarations for functions in coffgen.c.
* libcoff.h: Rebuilt to incorporate changes.
* coff-h8300.c: Function name changes.
* coff-z8k.c: Function name changes. Use coff_reloc16_extra_cases
hook rather than defining EXTRA_CASES.
* Makefile.in: Build new files coffgen and reloc16. Added
dependencies of coff-*.o on coffswap.h and seclet.h.
by configure, using configure.in .
**** start-sanitize-chill ****
* configure.in: Added sanitization for chill to the setting of
target_libs .
**** end-sanitize-chill ****
binary files oring in the right bit.
* main.c, source.c, state.c, symmisc.c: use macros defined in
fopen-{bin|both} when fopening files.
* remote-hms.c, remote-sim.c: lint
from a configuration file (typically including <limits.h>), or to
TARGET_CHAR_BIT if CHAR_BIT is not defined.
* eval.c (evaluate_subexp): Use new BYTES_TO_EXP_ELEM macro.
* eval.c (evaluate_subexp): Add case for OP_BITSTRING.
* expprint.c (print_subexp): Use new BYTES_TO_EXP_ELEM macro.
* exppritn.c (print_subexp, dump_expression): Add case for
OP_BITSTRING.
* expression.h (OP_BITSTRING): New expression element type for
packed bitstrings.
* expression.h (EXP_ELEM_TO_BYTES, BYTES_TO_EXP_ELEM): New
macros to convert between number of expression elements and bytes
to store that many elements.
* i960-tdep.c (leafproc_return): Use new macros to access
minimal symbol name and address fields.
* m88k-pinsn.c (sprint_address): Use new macros to access
minimal symbol name and address fields.
* nindy-tdep.c (nindy_frame_chain_valid): Use new macro to access
minimal symbol address field.
* parse.c (write_exp_elt, write_exp_string, prefixify_expression,
parse_exp_1): Use new EXP_ELEM_TO_BYTES macro.
* parse.c (write_exp_string, length_of_subexp, prefixify_expression):
Use new BYTES_TO_EXP_ELEM macro.
* parse.c (write_exp_bitstring): New function to write packed
bitstrings into the expression element vector.
* parse.c (length_of_subexp, prefixify_subexp): Add case for
OP_BITSTRING.
* parser-defs.h (struct stoken): Document that it is used for
OP_BITSTRING as well as OP_STRING.
* parser-defs.h (write_exp_bitstring): Add prototype.
**** start-sanitize-chill ****
* ch-exp.y (BIT_STRING_LITERAL): Change token type to sval.
* ch-exp.y (NUM, PRED, SUCC, ABS, CARD, MAX, MIN, SIZE, UPPER,
LOWER, LENGTH): New tokens for keywords.
* ch-exp.y (chill_value_built_in_routine_call, mode_argument,
upper_lower_argument, length_argument, array_mode_name,
string_mode_name, variant_structure_mode_name): New non-terminals
and productions.
* ch-exp.y (literal): Useful production for BIT_STRING_LITERAL.
* ch-exp.y (match_bitstring_literal): New lexer support function
to recognize bitstring literals.
* ch-exp.y (tokentab6): New token table for 6 character keywords.
* ch-exp.y (tokentab5): Add LOWER, UPPER.
* ch-exp.y (tokentab4): Add PRED, SUCC, CARD, SIZE.
* ch-exp.y (tokentab3): Add NUM, ABS, MIN, MAX.
* ch-exp.y (yylex): Check tokentab6.
* ch-exp.y (yylex): Call match_bitstring_literal.
**** end-sanitize-chill ****
