* cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
calls to cgen_get_insn_value and cgen_put_insn_value calls.
(extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
Jason Eckhardt <jle@redhat.com>
* mips-dis.c: Add support for bfd_mach_mipsisa32 and
bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
bfd_mach_mips64.
(LS): Define.
(insert_ds): Complain if not a multiple of 4.
(XSYNC): Define.
(XSYNC_MASK): Define.
(powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
"slbmfee". Modify "sync" to use XSYNC_MASK and LS.
* cgen-asm.in: Include "xregex.h" always to enable the libiberty
regex support.
(@arch@_cgen_build_insn_regex): New routine from Graydon.
(@arch@_cgen_assemble_insn): Add Graydon's code to use regex
to verify if it is worth parsing the insn as insn "x". Also update
error message when insn is not a recognized format of the insn vs
when the insn is completely unrecognized.
* i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
(OP_J): Use bfd_vma for mask to work properly with 64 bits.
(op_address,op_riprel): Use bfd_vma to handle 64 bits.
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* cgen-asm.c (cgen_parse_keyword): When looking for the
boundaries of a keyword, allow any special characters
that are actually in one of the allowed keyword.
* cgen-opc.c (cgen_keyword_add): Add any special characters
to the nonalpha_chars field.
Index: cgen/ChangeLog
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* desc.scm (<keyword> 'gen-defn): Add extra zero into
CGEN_KEYWORD_ENTRY initializers.
Index: include/opcode/ChangeLog
2001-06-13 Geoffrey Keating <geoffk@redhat.com>
* cgen.h (cgen_keyword): Add nonalpha_chars field.
(cond_jump_mode, loop_jcxz_mode): Define.
(dis386_att): Add cond_jump_flag and loop_jcxz_flag as
appropriate, and 'F' suffix to loop insns.
(disx86_64_att): Likewise.
(dis386_twobyte_att): Likewise.
(print_insn_i386): Don't output addr prefix for loop, jcxz insns.
Output data size prefix for long conditional jumps. Output cs and
ds branch hints.
(putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
(OP_J): Don't make PREFIX_DATA used.
(need_modrm): Give it file scope.
(MODRM_CHECK): Define.
(dofloat): Use MODRM_CHECK.
(OP_E): Likewise.
(OP_EM): Likewise.
(OP_EX): Likewise.
and fix testsuite yet again now that we are getting correct disassembly.
[opcodes/ChangeLog]
2001-05-07 Frank Ch. Eigler <fche@redhat.com>
* cgen-dis.in (default_print_insn): Tolerate min<base instructions
even at end of a section.
* cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
by ignoring precariously-unpacked insn_value in favor of raw buffer.
[cgen/ChangeLog]
2001-05-07 Frank Ch. Eigler <fche@redhat.com>
* iformat.scm (compute-insn-base-mask-length): Rewrite to tolerate
various-base-length instruction sets.
2001-05-04 Frank Ch. Eigler <fche@redhat.com>
* m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
2001-05-04 Frank Ch. Eigler <fche@redhat.com>
* cgen-dis.in (print_insn): Remove call to read_insn. Instead,
assume incoming buffer already has the base insn loaded. Handle
case of smaller-than-base instructions for variable-length case.
* cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
* cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
to allay a compiler warning.
* ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
notestr if larger than xsect.
(in_class): Handle format M5.
* ia64-asmtab.c: Regnerate.
* cpu-ia64-opc.c (elf64_ia64_operands}: Fix typo: error string for
C8 said "1" instead of "8". Clarify error string for IMM22:
"signed integer" instead of just "integer".
* config/tc-ia64.c (enum operand_match_result): New type.
(operand_match): Change return type to operand_match_result.
Fix all returns appropriately, adding support for returning the
out-of-range result.
(parse_operands): New locals result, error_pos, out_of_range_pos,
curr_out_of_range_pos. Rewrite operand matching loop to give better
error messages.
* ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
separate variants: one for IMM22 and the other for IMM14.
* ia64-asmtab.c: Regenerate.
operands is greater than 127.
2001-02-02 Patrick Macdonald <patrickm@redhat.com>
* cgen.h (CGEN_SYNTAX_CHAR_TYPE): Typedef as unsigned short.
(CGEN_MAX_SYNTAX_ELEMENTS): Rename from CGEN_MAX_SYNTAX_BYTES.
(CGEN_SYNTAX): Define using CGEN_MAX_SYNTAX_ELEMENTS.
* fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
* m32r-desc.h: Regenerate.
(dis386_twobyt): Add SSE2 instructions.
(twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
(twobyte_uses_f3_prefix): ... this one.
(grps): Add SSE instructions.
(prefix_user_table): Add two new slots; add SSE2 instructions.
(print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
Handle the REPNZ and Data16 prefixes as well; do proper lookup
to prefix_user_table.
(OP_E): Accept mfence and lfence as well.
(OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
(OP_XMM): Support REX extensions.
(OP_EM): Likewise.
(OP_EX): Likewise.
* cgen-asm.in (parse_insn_normal): Changed syn to be
CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
as character to use CGEN_SYNTAX_CHAR macro and all comparisons
to '\0' to use 0 instead.
* cgen-dis.in (print_insn_normal): Ditto.
* cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
(rex): New static variable.
(REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
(USED_REX): New macro.
(Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
(OP_I64, OP_OFF64, OP_IMREG): New functions.
(OP_REG, OP_OFF): Declare.
(get64, get32, get32s): New functions.
(r??_reg): New constants.
(dis386_att): Change templates of instruction implicitly promoted
to 64bit; change e?? to RMe?? for unwind RM byte instructions.
(grps): Likewise.
(dis386_intel): Likewise.
(dixx86_64_att): New table based on dis386_att.
(dixx86_64_intel): New table based on dis386_intel.
(names64, names8rex): New global variable.
(names32, names16): Add extended registers.
(prefix_user_t): Recognize rex prefixes.
(prefix_name): Print REX prefixes nicely.
(op_riprel): New global variable.
(start_pc): Set type to bfd_vma.
(print_insn_i386): Detect the 64bit mode and use proper table;
move ckprefix after initializing the buffer; output unused rex prefixes;
output information about target of RIP relative addresses.
(putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
(print_operand_value): New function.
(OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
REX prefix and new modes.
(get64, get32s): New.
(get32): Return bfd_signed_vma type.
(set_op): Initialize the op_riprel.
* disassemble.c (disassembler): Recognize the x86-64 disassembly.
2001-01-02 Richard Sandiford <rsandifo@redhat.com>
* cgen-dis.c (hash_insn_array): Use bfd_put_bits().
(hash_insn_list): Likewise
* cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
(extract_1): Use bfd_get_bits().
(extract_normal): Apply sign extension to both extraction
methods.
* cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
(cgen_put_insn_value): Use bfd_put_bits()
* elfxx-ia64.c (get_dyn_sym_info): Cast %p argument to void *.
* config/tc-ia64.h (ia64_init): Add prototype.
* gas/ia64/dv-imply.d, gas/ia64/dv-mutex.d, gas/ia64/dv-safe.d,
gas/ia64/dv-srlz.d, gas/ia64/opc-m.d: Update.
* ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
argument.
* ia64_gen.c (insert_deplist): Cast sizeof result to int.
(print_dependency_table): Print NULL if semantics field not set.
(insert_opcode_dependencies): Mark cmp parameter as unused.
(print_main_table): Use fprintf_vma to print long long fields.
(main): Mark argv paramter as unused. Convert to old style definition.
* ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
* ia64-asmtab.c: Regnerate.
