This patch fixes two problems in the SPARC assembler:
- The diagnostic message
Error: Illegal operands: Immediate value in cbcond is out of range.
is incorrectly issued for non-CBCOND instructions that feature a
simm5 immediate field, such as MPMUL, MONTMUL, etc.
- When an invalid immediate operand is used in a CBCOND
instruction, two redundant error messages are issued to the
user, the second due to a stale fixup (this happens since
commit 85024cd8bc).
Some diagnostic tests for the CBCOND instructions are also
included in the patch.
Tested in both sparc64-linux-gnu and sparcv9-linux-gnu targets.
gas/ChangeLog:
2016-11-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Avoid emitting a cbcond error
messages for non-cbcond instructions.
* testsuite/gas/sparc/cbcond-diag.s: New file.
* testsuite/gas/sparc/cbcond-diag.l: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run cbcond-diag tests.
Using std::move forces an extra copy of the object. These changes fix
-Wpessimizing-move warnings from clang.
gdb/ChangeLog:
* ada-lang.c (create_excep_cond_exprs): Do not use 'std::move'.
* ax-gdb.c (agent_eval_command_one): Likewise.
(agent_eval_command_one): Likewise.
* breakpoint.c (parse_cond_to_aexpr): Likewise.
(parse_cmd_to_aexpr): Likewise.
* dtrace-probe.c (dtrace_process_dof_probe): Likewise.
* parse.c (parse_expression_for_completion): Likewise.
Both libc++ and libstdc++ declare non-throwing new operators as
noexcept and overloads must also be noexcept. This fixes a
-Wmissing-exception-spec warning with clang.
gdb/ChangeLog:
* common/new-op.c (operator new): Mark 'noexcept'.
(operator new[]): Likewise.
The function copy_bitwise used for copying DWARF pieces can potentially
be invoked for large chunks of data. For instance, consider a large
struct one of whose members is currently located in a register. In this
case copy_bitwise would still copy the data bitwise in a loop, which is
much slower than necessary.
This change uses memcpy for the large part instead, if possible.
gdb/ChangeLog:
* dwarf2loc.c (copy_bitwise): Use memcpy for the middle part, if
it is byte-aligned.
This adds a unit test for the copy_bitwise function in dwarf2loc.c.
With the old (broken) version of copy_bitwise this test would generate
the following failure message:
(gdb) maintenance selftest
Self test failed: copy_bitwise 11000000 != 10000000 (7+2 -> 0)
gdb/ChangeLog:
2016-11-24 Andreas Arnez <arnez@linux.vnet.ibm.com>
Pedro Alves <palves@redhat.com>
* dwarf2loc.c (bits_to_str, check_copy_bitwise)
(copy_bitwise_tests): New functions.
(_initialize_dwarf2loc): Register the new function
copy_bitwise_tests as a unit test.
* selftest.c (run_self_tests): Improve the failure message's
wording and formatting.
When the user writes or reads a variable whose location is described
with DWARF pieces (DW_OP_piece or DW_OP_bit_piece), GDB's helper
function copy_bitwise is invoked for each piece. The implementation of
this function has a bug that may result in a corrupted copy, depending
on alignment and bit size. (Full-byte copies are not affected.)
This rewrites copy_bitwise, replacing its algorithm by a fixed version,
and adding an appropriate test case. Without the fix the new test case
fails, e.g.:
print def_t
$2 = {a = 0, b = 4177919}
(gdb) FAIL: gdb.dwarf2/nonvar-access.exp: print def_t
Written in binary, the wrong result above looks like this:
01111111011111111111111
Which means that two zero bits have sneaked into the copy of the
original all-one bit pattern. The test uses this simple all-one value
in order to avoid another GDB bug that causes the DWARF piece of a
DW_OP_stack_value to be taken from the wrong end on big-endian
architectures.
gdb/ChangeLog:
* dwarf2loc.c (extract_bits_primitive): Remove.
(extract_bits): Remove.
(copy_bitwise): Rewrite. Fixes a possible corruption that may
occur for non-byte-aligned copies.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/nonvar-access.exp: Add a test for accessing
non-byte-aligned bit fields.
The DW_AT_data_bit_offset attribute was introduced by DWARF V4 and
allows specifying the offset of a data member within its containing
entity. But although the new attribute was intended to replace
DW_AT_bit_offset for this purpose, GDB ignores it, and thus GCC still
emits DW_AT_bit_offset instead. See also
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71669.
This change fixes GDB's lack of support for DW_AT_data_bit_offset and
adds an appropriate test case.
gdb/ChangeLog:
PR gdb/12616
* dwarf2read.c (dwarf2_add_field): Handle the DWARF V4 attribute
DW_AT_data_bit_offset.
gdb/testsuite/ChangeLog:
PR gdb/12616
* gdb.dwarf2/nonvar-access.exp: New testcase. Check that GDB
respects the DW_AT_data_bit_offset attribute.
bfd/
PR target/20737
* elf32-arm.c (elf32_arm_final_link_relocate): Bind defined symbol
locally in PIE.
ld/
* testsuite/ld-arm/pie-bind-locally-a.s: New test source.
* testsuite/ld-arm/pie-bind-locally-b.s: Likewise.
* testsuite/ld-arm/pie-bind-locally.d: New testcase.
* testsuite/ld-arm/arm-elf.exp: Run new testcase.
This patch fixes a few problems with GDB's time handling.
#1 - It avoids problems with gnulib's C++ namespace support
On MinGW, the struct timeval that should be passed to gnulib's
gettimeofday replacement is incompatible with libiberty's
timeval_sub/timeval_add. That's because gnulib also replaces "struct
timeval" with its own definition, while libiberty expects the
system's.
E.g., in code like this:
gettimeofday (&prompt_ended, NULL);
timeval_sub (&prompt_delta, &prompt_ended, &prompt_started);
timeval_add (&prompt_for_continue_wait_time,
&prompt_for_continue_wait_time, &prompt_delta);
That's currently handled in gdb by not using gnulib's gettimeofday at
all (see common/gdb_sys_time.h), but that #undef hack won't work with
if/when we enable gnulib's C++ namespace support, because that mode
adds compile time warnings for uses of ::gettimeofday, which are hard
errors with -Werror.
#2 - But there's an elephant in the room: gettimeofday is not monotonic...
We're using it to:
a) check how long functions take, for performance analysis
b) compute when in the future to fire events in the event-loop
c) print debug timestamps
But that's exactly what gettimeofday is NOT meant for. Straight from
the man page:
~~~
The time returned by gettimeofday() is affected by
discontinuous jumps in the system time (e.g., if the system
administrator manually changes the system time). If you need a
monotonically increasing clock, see clock_gettime(2).
~~~
std::chrono (part of the C++11 standard library) has a monotonic clock
exactly for such purposes (std::chrono::steady_clock). This commit
switches to use that instead of gettimeofday, fixing all the issues
mentioned above.
gdb/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/run-time-clock.c.
(HFILES_NO_SRCDIR): Add common/run-time-clock.h.
(COMMON_OBS): Add run-time-clock.o.
* common/run-time-clock.c, common/run-time-clock.h: New files.
* defs.h (struct timeval, print_transfer_performance): Delete
declarations.
* event-loop.c (struct gdb_timer) <when>: Now a
std::chrono::steady_clock::time_point.
(create_timer): use std::chrono::steady_clock instead of
gettimeofday. Use new instead of malloc.
(delete_timer): Use delete instead of xfree.
(duration_cast_timeval): New.
(update_wait_timeout): Use std::chrono::steady_clock instead of
gettimeofday.
* maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
and "timeval-utils.h".
(scoped_command_stats::~scoped_command_stats)
(scoped_command_stats::scoped_command_stats): Use
std::chrono::steady_clock instead of gettimeofday. Use
user_cpu_time_clock instead of get_run_time.
* maint.h: Include "run-time-clock.h" and <chrono>.
(scoped_command_stats): <m_start_cpu_time>: Now a
user_cpu_time_clock::time_point.
<m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
* mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
"gdb_sys_time.h" and <sys/resource.h>.
(rusage): Delete.
(mi_execute_command): Use new instead of XNEW.
(mi_load_progress): Use std::chrono::steady_clock instead of
gettimeofday.
(timestamp): Rewrite in terms of std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
(timeval_diff): Delete.
(print_diff): Adjust to use std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
* mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
of "gdb_sys_time.h".
(struct mi_timestamp): Change fields types to
std::chrono::steady_clock::time_point, user_cpu_time_clock::time
and system_cpu_time_clock::time_point, instead of struct timeval.
* symfile.c: Include <chrono> instead of <time.h> and
"gdb_sys_time.h".
(struct time_range): New.
(generic_load): Use std::chrono::steady_clock instead of
gettimeofday.
(print_transfer_performance): Replace timeval parameters with a
std::chrono::steady_clock::duration parameter. Adjust.
* utils.c: Include <chrono> instead of "timeval-utils.h",
"gdb_sys_time.h", and <time.h>.
(prompt_for_continue_wait_time): Now a
std::chrono::steady_clock::duration.
(defaulted_query, prompt_for_continue): Use
std::chrono::steady_clock instead of
gettimeofday/timeval_sub/timeval_add.
(reset_prompt_for_continue_wait_time): Use
std::chrono::steady_clock::duration instead of struct timeval.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
(vfprintf_unfiltered): Use std::chrono::steady_clock instead of
gettimeofday. Use std::string. Use '.' instead of ':'.
* utils.h: Include <chrono>.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
gdb/gdbserver/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* debug.c: Include <chrono> instead of "gdb_sys_time.h".
(debug_vprintf): Use std::chrono::steady_clock instead of
gettimeofday. Use '.' instead of ':'.
* tracepoint.c: Include <chrono> instead of "gdb_sys_time.h".
(get_timestamp): Use std::chrono::steady_clock instead of
gettimeofday.
Mostly some whitespace changes to make things a bit more consistent.
gdb/ChangeLog:
* Makefile.in: Fix whitespace formatting.
gdb/gdbserver/ChangeLog:
* Makefile.in: Fix whitespace formatting.
I find the big file lists in the Makefiles a bit ugly and not very
practical. Since there are multiple filenames on each line (as much as
fits in 80 columns), it's not easy to add, remove or change a name in
the middle. As a result, we have a mix of long and short lines in no
particular order (ALL_TARGET_OBS is a good example).
I therefore suggest flattening the lists (one name per line) and keeping
them in alphabetical order. The diffs will be much clearer and merge
conflicts will be easier to resolve.
A nice (IMO) side-effect I observed is that the files are compiled
alphabetically by make, so it gives a rough idea of the progress of the
build.
I added a comment in gdb/Makefile.in to mention to keep the file lists
ordered, and gave the general guidelines on what order to respect. I
added a comment in other Makefiles which refers to gdb/Makefile.in, to
avoid duplication.
Running the patch through the buildbot found that gdb.base/default.exp
started to fail. The languages in the error message shown when typing
"set language" have changed order. We could probably improve gdb so
that it prints them in a stable order, regardless of the order of the
object list passed to the linked, but just fixing the test is easier for
now.
New in v2:
- Change ordering style, directories go at the end.
- Cleanup gdbserver's and data-directory's Makefile as well.
- Add comments at top of Makefiles about the ordering.
- Remove wrong trailing backslahes.
- Fix test gdb.base/default.exp.
gdb/ChangeLog:
* Makefile.in: Add comment about file lists ordering.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_MI_OBS, SUBDIR_MI_SRCS,
SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_GCC_COMPILE_OBS,
SUBDIR_GCC_COMPILE_SRCS, SUBDIR_GUILE_OBS, SUBDIR_GUILE_SRCS,
SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS, SUBDIR_GDBTK_OBS,
SUBDIR_GDBTK_SRCS, XMLFILES, REMOTE_OBS, ALL_64_TARGET_OBS,
ALL_TARGET_OBS, SFILES, HFILES_NO_SRCDIR, HFILES_WITH_SRCDIR,
COMMON_OBS, YYFILES, YYOBJ, generated_files, ALLDEPFILES):
Flatten list and order alphabetically.
* data-directory/Makefile.in: Add comment about file lists
ordering.
(GEN_SYSCALLS_FILES, PYTHON_FILE_LIST): Flatten list and order
alphabetically.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES, OBS): Flatten list and order
alphabetically.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Fix output of "set language".
PR ld/20815
bfd * elf.c (elf_modify_segment_map): Allow empty LOAD segments if
they contain the program headers.
(_bfd_elf_map_sections_to_segments): If the linker created the
PHDR segment then always attempt to include it in a LOAD segment.
(assign_file_positions_for_non_load_sections): Allow LOAD segments
to overlap PHDR segments.
(phdr_sorter): New function. Sorts program headers.
(assign_file_positions_except_relocs): Sort the program headers
before writing them out. Issue an error if the PHDR segment is
not covered by a LOAD segment, unless the backend allows it.
* elf-bfd.h (struct elf_backend_data): Add
elf_backend_allow_non_load_phdr.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Provide
default definition that returns FALSE.
(elfNN_bed): Initialise the elf_backend_allow_non_load_phdr
field.
* elf64-hppa.c (elf64_hppa_allow_non_load_phdr): New function.
Returns TRUE.
(elf_backend_allow_non_load_phdr): Define.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Do not
place the interpreter string into the .interp section if the
nointerp flag is set in the link info structure.
* elf32-arc.c (elf_arc_size_dynamic_sections): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Allow for the
_gp symbol not being part of the output.
binutils* readelf.c (process_program_headers): Check PT_LOAD and PT_PHDR
segments for validity.
ld * ld.texinfo: Note that PT_TLS can be used as a segment type.
* testsuite/ld-discard/discard.ld: Add space for program headers.
* testsuite/ld-elf/flags1.ld: Likewise.
* testsuite/ld-elf/maxpage3.t: Likewise.
* testsuite/ld-elf/noload-1.t: Likewise.
* testsuite/ld-elf/orphan.ld: Likewise.
* testsuite/ld-elf/overlay.t: Likewise.
* testsuite/ld-elf/pr14052.t: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-elf/weak-dyn-1.ld: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-scripts/defined.t: Likewise.
* testsuite/ld-scripts/defined6.t: Likewise.
* testsuite/ld-scripts/dynamic-sections.t: Likewise.
* testsuite/ld-scripts/empty-aligned.t: Likewise.
* testsuite/ld-scripts/provide-2.t: Likewise.
* testsuite/ld-scripts/provide-4.t: Likewise.
* testsuite/ld-vax-elf/plt-local.ld: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-elf/ehdr_start-missing.d: Do not initialise the
dynamic linker.
* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
* testsuite/ld-elf/elf.exp (pr14170, pr17068): Likewise.
* testsuite/ld-elf/loadaddr1.d: Update expected readelf output.
* testsuite/ld-elf/noload-2.d: Likewise.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-scripts/phdrs3a.d: Likewise.
* testsuite/ld-scripts/size-2.d: Likewise.
* testsuite/ld-elf/group.ld: Add program headers.
* testsuite/ld-elf/overlay.d: Skip for SPU.
* testsuite/ld-elf/flags1.d: Skip for RX.
* testsuite/ld-elf/pr19162.d: Skip for HPPA64.
* testsuite/ld-elf/pr19539.d: Skip for ALPHA.
* testsuite/ld-scripts/empty-orphan.t: Update program headers.
* testsuite/ld-scripts/size-2.t: Likewise.
gas/ChangeLog:
2016-11-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/sparc.exp (gas_64_check): Make sure the
hwcaps-bump test is run with 64-bit objects.
gold/
PR gold/20346
* options.cc (One_option::print): Print "(default)" when appropriate.
* options.h: Clean up and re-sort options.
(One_option::is_default): New data member.
(One_option::One_option): Add is_default parameter; adjust all calls.
(DEFINE_var): Add is_default__ parameter; adjust all calls.
(DEFINE_bool): Set is_default based on default_value__.
(DEFINE_bool_ignore): New macro.
(--no-eh-frame-hdr): New option.
(--enable-new-dtags): Remove mention of DT_FLAGS.
Use regcache in software_single_step.
gdb:
2016-11-22 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Call
get_regcache_arch instead of get_frame_arch. Call
regcache_read_pc instead of get_frame_pc.
This patch adds a new regcache api regcache_raw_get_signed.
gdb:
2016-11-22 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache_raw_get_signed): New function.
* regcache.h (regcache_raw_get_signed): Declare.
When the assembler finds an instruction which is part of a higher
opcode architecture it bumps the current opcode architecture. For
example:
$ echo "mwait" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
However, when two instructions pertaining to the same opcode
architecture but associated to different SPARC hardware capabilities
are found in the input stream, and no GAS architecture is specified in
the command line, the assembler bangs:
$ echo "mwait; wr %g0,%g1,%mcdper" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
{standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr".
... and it should'nt, as WRMCDPER pertains to the same architecture
level than MWAIT.
This patch fixes this by extending the definition of sparc opcode
architectures to contain a set of hardware capabilities and making the
assembler to take these capabilities into account when updating the
set of allowed hwcaps when an architecture bump is triggered by some
instruction.
This way, hwcaps associated to architecture levels are maintained in
opcodes, while the assembler keeps the flexibiity of defining GAS
architectures including additional hwcaps (like -Asparcfmaf or the
v8plus* variants).
A test covering this failure case is included.
gas/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c: Move HWS_* and HWS2_* definitions to
opcodes/sparc-opc.c.
(sparc_arch): Clarify the new role of the hwcap_allowed and
hwcap2_allowed fields.
(sparc_arch_table): Remove HWS_* and HWS2_* instances from
hwcap_allowed and hwcap2_allowed respectively.
(md_parse_option): Include the opcode arch hwcaps when processing
-A.
(sparc_ip): Use the current opcode arch hwcaps to update
hwcap_allowed, as well of the hwcaps of the instruction triggering
the bump.
* testsuite/gas/sparc/hwcaps-bump.s: New file.
* testsuite/gas/sparc/hwcaps-bump.l: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in
hwcaps-bump.
include/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and
hwcaps2.
opcodes/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (HWS_V8): Definition moved from
gas/config/tc-sparc.c.
(HWS_V9): Likewise.
(HWS_VA): Likewise.
(HWS_VB): Likewise.
(HWS_VC): Likewise.
(HWS_VD): Likewise.
(HWS_VE): Likewise.
(HWS_VV): Likewise.
(HWS_VM): Likewise.
(HWS2_VM): Likewise.
(sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of
existing entries.
It makes just a little more sense to use input_bfd when retrieving
insns for relocation, since the relocations match the endianness of
the input bfd.
* elf32-ppc.c (ppc64_elf_relocate_section): Calculate d_offset for
input_bfd. Replace occurrences of output_bfd as bfd_get_32 and
bfd_put_32 param with input_bfd.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise. Also
ppc_elf_vle_split16 param.
(ppc_elf_vle_split16): Rename output_bfd param to input_bfd.
We renamed VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID recently,
https://sourceware.org/ml/gdb-patches/2016-11/msg00018.html
and we should use VALUE_NEXT_FRAME_ID in value_from_component
too.
gdb:
2016-11-22 Yao Qi <yao.qi@linaro.org>
* value.c (value_from_component): Use VALUE_NEXT_FRAME_ID
instead of VALUE_FROM_ID.
