* config/sh/tm-sh.h (struct gdbarch_tdep): Add
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM fields.
* sh-tdep.c (sh_skip_prologue_hard_way): Rename from
skip_prologue_hard_way().
(skip_prologue_hard_way): Make it a function pointer.
(sh_print_register): Use function pointer do_pseudo_register,
instead of sh_do_pseudo_register.
(sh_do_registers_info): Ditto.
(sh_gdbarch_init): Initialize do_pseudo_register.
(IS_MOV_TO_R14): Rename from IS_MOV_R14.
(skip_prologue_hard_way): Update.
(sh_gdbarch_init): Move setting of frame_chain,
get_saved_register, init_extra_frame_info, push_arguments,
extract_return_value, pop_frame, store_struct_return,
extract_struct_value_address, use_struct_convention,
init_extra_frame_info to before target specific settings.
(sh_gdbarch_init): Initialize new tdep fields
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM.
(sh_push_arguments): Use new gdbarch_tdep fields
{ARG0,ARGLAST}_REGNUM.
(sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
sh_init_extra_frame_info, sh_push_return_address,
sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
gdbarch_tdep->PR_REGNUM.
(dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
* sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
conditional for help with connections through parallel ports,
given that the actual code for downloading through a parallel port
is not conditionalized.
* sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
unmaintaned, and probably on its way to obsolescence.
* sh-tdep.c: Get rid of the function prototypes.
(sh_sh4_build_float_register_type): Move earlier in file.
(fv_reg_base_num): Ditto.
(dr_reg_base_num): Ditto.
* sh-tdep.c: Update copyright.
(sh_extract_return_value): Rewrite.
(sh3e_sh4_extract_return_value): New function.
(sh_gdbarch_init): Initialize gdbarch_extract-return_value to new
version of the function for sh3e and sh4 CPUs.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): SR_REGNUM is
now part of gdbarch_tdep structure.
(sh_gdbarch_init): Initialize SR_REGNUM.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add field SR_REGNUM.
* sh-tdep.c (sh_do_pseudo_register): Indent properly. Call
do_dr_register_info() only for DR registers.
(sh_sh4_register_name): Add comments with numbers.
(_initialize_sh_tdep): Move assignment to disassemble printing
function from here...
(sh_gdbarch_init):...to here. Move some more general settings to
before the architecture is recognized.
* config/sh/tm-sh.h (struct gdbarch_tdep): Rename fields
{FP15,DR14,FV12}_REGNUM to {FP,DR,FV}_LAST_REGNUM.
* sh-tdep.c (sh_sh3e_register_virtual_type,
sh_sh4_register_virtual_type, sh_do_registers_info,
sh_gdbarch_init, sh_sh4_register_byte, sh_sh4_register_raw_size,
sh_sh4_register_convertible, sh_sh4_register_convert_to_virtual,
sh_sh4_register_convert_to_raw, sh_fetch_pseudo_register,
sh_store_pseudo_register, sh_do_pseudo_register): Ditto.
* sh-tdep.c (sh_gdbarch_init): Use a function pointer to set the
disassembly print function.
(_initialize_sh_tdep): Initialize tm_print_insn using the function
pointer.
* config/sh/tm-sh.h (struct gdbarch_tdep): Get rid of
DR{2,4,6,8,10,12}_REGNUM, FV{4,8}_REGNUM, they are not used
anywhere.
* sh-tdep.c (sh_gdbarch_init): Don't initialize
DR{2,4,6,8,10,12}_REGNUM, FV{4,8}_REGNUM.
* config/sh/tm-linux.h: New file. Include generic tm-linux.h,
plus tm-sh.h, then define SVR4_FETCH_LINK_MAP_OFFSETS to use
the sh target function instead of the default link map offsets.
* config/sh/sh.mt: Add solib.o and solib-svr4.o to TDEPFILES.
Use sh/tm-linux.h instead of sh/tm-sh.h.
* sh-tdep.c (sh_linux_svr4_fetch_link_map_offsets):
New function. Construct target-specific link map offsets.
* i386-linux-tdep.c (i386_linux_svr4_fetch_link_map_offsets:
New function. Construct target-specific link map offsets.
* config/i386/tm-linux.h: Use above function instead of default.
2000-10-30 Michael Snyder <msnyder@cleaver.cygnus.com>
* config/i386/tm-linux.h: Remove definition of SVR4_SHARED_LIBS,
and inclusion of solib.h. Move up into ../tm-linux.h.
config/tm-linux.h: Define SVR4_SHARED_LIBS, include solib.h.
* sh-tdep.c (sh_push_arguments): Make header match prototype.
* remote-e7000.c (e7000_start_remote): Use void *, not char * as
parameter to avoid compiler warning.
(fetch_regs_from_dump): Call get_hex() with the correct number of
parameters.
* sh-tdep.c (sh_gdbarch_init): For sh4 initialize
register_convert_to_raw, register_convert_to_virtual,
register_convertible.
(sh_sh4_register_convertible): New function.
(sh_sh4_register_convert_to_virtual): New function.
(sh_sh4_register_convert_to_raw): New function.
Include floatformat.h.
* sh-tdep.c (sh_sh4_register_name, sh_sh4_register_byte,
sh_sh4_register_raw_size, sh_sh4_register_virtual_type,
sh_fetch_pseudo_register, sh_store_pseudo_register,
sh_do_pseudo_register, sh_gdbarch_init): Fix names for pseudoregs,
they should be numbered as drx fvy where x and y are multiples of
2 and 4 respectively.
* config/sh/tm-sh.h: Fix names of pseudo regs.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add sh4 specific
pseudo registers.
(DO_REGISTERS_INFO): Define.
* sh-tdep.c (sh_sh4_register_name): New function.
(sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update
signature.
(sh_show_regs_command): New function. Actual function called by
the 'regs' command.
(sh_register_byte): Rename to...
(sh_default_register_byte): ...New function.
(sh_sh4_register_byte): New function.
(sh_register_raw_size): Rename to...
(sh_default_register_raw_size): ...New function.
(sh_sh4_register_raw_size): New function.
(sh_sh4_register_virtual_type): New function.
(sh_sh4_build_float_register_type): New function.
(sh_fetch_pseudo_register, sh_store_pseudo_register): New
functions.
(fv_reg_base_num, dr_reg_base_num): New functions.
(do_fv_register_info, do_dr_register_info, sh_do_pseudo_register,
sh_do_fp_register, sh_do_register, sh_print_register,
sh_do_registers_info): New functions.
(sh_gdbarch_init): Initialize sh4 pseudo registers to -1. Update
architecture specific parts.
(_initialize_sh_tdep): Use sh_show_regs_command for 'regs' command.
* config/sh/tm-sh.h (STORE_RETURN_VALUE): Redefine as
sh_store_return_value().
* sh-tdep.c (sh_store_return_value): New function. Store the
value returned by a function into the appropriate register.
2000-07-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* sh-tdep.c (sh_skip_prologue): Before looking at the actual
instructions, try to see if the symbol table can be of help, by
calling after_prologue(). If this doesn't work, call
skip_prologue_hard_way().
(skip_prologue_hard_way): Renamed from sh_skip_prologue. Add some
more instruction pattern matching for pushing of arguments, and
manipulation of r14.
(after_prologue): New function. Use symbol table info to determine
the end of the prologue, if possible.
Committed by Elena Zannoni <ezannoni@cygnus.com>
* sh-tdep.c (sh_skip_prologue): Change prologue matching for modern
compilers.
(sh_frame_find_saved_regs): Ditto.
(sh_find_callers_reg): Stop if pc is zero.
arch-utils.{h,c}. The ``set architecutre'' and ``set endian''
commands (part of the move) were implemented to use add_set_enum_cmd()
so that ``set architecture <tab>'' works.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
* config/arm/tm-wince.h: New file.
* config/arm/wince.mt New file.
* config/sh/tm-wince.h: New file.
* config/sh/wince.mt New file.
* config/mips/tm-wince.h: New file.
* config/mips/wince.mt New file.
* wince.c: New file.
* wince-stub.c: New file.
* wince-stub.h: New file.
* sh-tdep.c: Use correct register names for Windows CE.
Re-do TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN, TARGET_ARCHITECTURE,
TARGET_ARCHITECTURE_AUTO, TARGET_BYTE_ORDER_SELECTABLE_P,
TARGET_BYTE_ORDER so that they can all be overriden.
Document.
Convert mn10300 and PPC targets.
ChangeLog sh-tdep.c config/sh/tm-sh.h
* config/sh/tm-sh.h: add define for FPSCR_REGNUM
* sh-tdep.c (sh_show_regs): print out all registers for
the current processor
address.
* (remote_ops extended_remote_ops remote_desc remote_write_size):
Make static.
* (remote_fetch_registers remote_write_bytes remote_read_bytes):
Record size of response to fetch registers command, use this to
limit size of memory read and write commands.
* (push_remote_target): New function to make it possible to have
another target switch to the remote target.
* target.h: Add prototype for push_remote_target.
* sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs
for hosts which default to unsigned chars (such as SGI's).
* (_initialize_sh_tdep): Don't set remote_write_size. It's now
handled automatically in remote.c.
Added some generic target-independant code for managing call-dummy frames.
Wed Nov 27 10:32:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint.
* blockframe.c: Add target-independant support for managing
CALL_DUMMY frames on the host side.
* frame.h: Declarations for generic CALL_DUMMY frame support.
* h8300-tdep.c: Add target function calls using generic frame support.
* config/h8300/tm-h8300.h: config for generic target function calls.
start-sanitize-m32r
* m32r-tdep.c: Add target function calls using generic frame support.
* config/m32r/tm-m32r.h: config for generic target function calls.
end-sanitize-m32r
* sh-tdep.c: Add target function calls using generic frame support.
* config/sh/tm-sh.h: config for generic target function calls.
start-sanitize-v850
* v850-tdep.c: Add target function calls using generic frame support.
* config/v850/tm-v850.h: config for generic target function calls.
end-sanitize-v850
* valops.c: ADD PUSH_RETURN_ADDRESS so that it doesn't have to be
done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
* sh-tdep.c: Add functionality for target function calls.
* config/sh/tm-sh.h: Add support for target function calls.
This is a safety check-in: everything works, and there'll be another
clean-up round shortly.
be consistent with GCC.
(FPUL_REGNUM, etc): Renumber to match list changes.
(ADDR_BITS_REMOVE): Delete.
* sh-tdep.c (sh_reg_names, sh3_reg_names, sh3e_reg_names):
Rearrange to match REGISTER_NAMES.
* sh3-rom.c (sh3_regnames, sh3e_regnames): Ditto.
PR 9457
* sh-tdep.c (set processor): New command to set specific
processor type.
(sh_reg_names, sh3_reg_names): Arrays of register names for
SH and SH3 processors.
(sh_set_processor_type): New function.
* sh3-rom.c (sh3_open): Call it.
(sh3_regname): Add names of all the bank registers.
(sh3_supply_register): Clean up formatting.
* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
bank registers.
(REGISTER_NAMES): Add names of bank registers.
(FP15_REGNUM): Define.
(REGISTER_VIRTUAL_TYPE): Use it.
* monitor.c: Clean up some comments.
S-record download code into srec.c.
* srec.c srec.h: New files. Contain S-record loading routines
formerly in monitor.c.
* serial.c serial.h: New routine just like fprintf, but uses
serial_t instead of FILE *.
* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
Don't add four to saved pc (makes things match manual). Also, fix
bug where we didn't get pc from stack frame correctly.
* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
saved pc. Real hardware does this for you.
* sh3-rom.c (sh3_load): New routine. Sets up for download then
calls generic S-record loader.
* config/h8300/h8300.mt, config/h8500/h8500.mt,
config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
Add srec.o to TDEPFILES.
(BC_BREAKPOINTS): Disable.
* sh-tdep.c (print_insn): Cope with big and little endian machines.
* sh/sh.mt: Use libsim.a
* sh/tm-sh.h (TARGET_BYTE_ORDER_SELECTABLE): New
(BREAKPOINT): Changed to be byteorder independent.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
* remote.c (fromhex): Make error more explicit.
(read_frame): Don't print bad checksum information unless
remote_debugging. Don't use repeat count unless it's > 0.
* remote-e7000.c (expect): When echoing, ignore multiple newlines.
(e7000_insert_breakpoint, e7000_remove_breakpoint, target_ops): Optionally
cope with BC style breakpoints.
(e7000_command): After command send directly to the E7000 mark
registers as changed.
(why_stop, e7000_wait: Understand BC style stop condition.
* sh-tdep.c (sh_skip_prologue): Understand more complicated
sequences. (frame_find_saved_regs): Likewise.
* config/h8500/tm-h8500.h (target_write_pc, TARGET_WRITE_PC):
Handle extra arg.
* config/i386/xm-go32.h (GDBINIT_FILENAME): Set to gdb.ini.
(more work here to come)
* config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function
fields.
* h8500-tdep.c (saved_pc_after_call): The size of the
pc is memory model dependent. (segmented_command,
unsegmented_command, _initialize_h8500_tdep): New commands to
change memory model.
* remote-7000.c (initialize_remote_e7000): Change name of snoop
command.
* remote-hms.c (hms_load): Remove breakpoints when loaded.
(hms_wait): Use new status structure
(hms_open): Push the target here. (hms_before_main_loop): Not
here. (supply_val, hms_fetch_register, hms_store_register): Cope
with H8/500 names too.
* sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
all registers in a compact way.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
host.
* sh-tdep.c (frame_find_saved_regs): Use NUM_REGS rather than hard
wired (and wrong) constant.
* values.c (unpack_long): Add case to unpack when target object is
sizeof(int).
* config/sh/tm-sh.h (REGISTER_NAMES): Know about the news ones the
simulator defines.
