feat(simulator): expose topic commands

## Summary
- capture local Expo CLI iOS entitlements introspection failures in Sentry before falling back to bundled config resolution
- tag the event with `app_id` from `EAS_BUILD_PROJECT_ID` and the config resolution path
- capture a short fallback message so this is easier to distinguish from generic spawn failures
- include the failed command stdout, stderr, and exit status as Sentry extras

## Why
If `expo config --json --type introspect` fails but the bundled config fallback succeeds, users no longer hit a hard failure. Capturing the original command failure gives us visibility into the remaining fallback cases without breaking builds, and the explicit message makes these events easier to identify.

## Validation

CI should pass.

CHANGELOG.md

@@ -8,10 +8,51 @@ This is the log of notable changes to EAS CLI and related packages.
 
 ### 🎉 New features
 
-- [eas-cli] New command `observe:routes` for navigation metrics. ([#3730](https://github.com/expo/eas-cli/pull/3730) by [@douglowder](https://github.com/douglowder))
+### 🐛 Bug fixes
+
+### 🧹 Chores
+
+## [19.0.1](https://github.com/expo/eas-cli/releases/tag/v19.0.1) - 2026-05-19
 
 ### 🐛 Bug fixes
 
+- [eas-cli] Disable dotenv loading when resolving managed iOS entitlements. ([#3752](https://github.com/expo/eas-cli/pull/3752) by [@sjchmiela](https://github.com/sjchmiela))
+- [eas-cli] Restore the bundled config fallback for managed iOS entitlements introspection. ([#3753](https://github.com/expo/eas-cli/pull/3753) by [@sjchmiela](https://github.com/sjchmiela))
+
+## [19.0.0](https://github.com/expo/eas-cli/releases/tag/v19.0.0) - 2026-05-19
+
+### 🛠 Breaking changes
+
+- [eas-cli] Make browser-based authentication the default for `eas login`. Use `--no-browser` for CLI-based login. ([#3746](https://github.com/expo/eas-cli/pull/3746) by [@byronkarlen](https://github.com/byronkarlen))
+
+### 🎉 New features
+
+- [eas-cli] Allow command `observe:routes` to filter results to specific route names. ([#3744](https://github.com/expo/eas-cli/pull/3744) by [@douglowder](https://github.com/douglowder))
+
+### 🐛 Bug fixes
+
+- [eas-cli] Check that `expo` is resolvable before assuming it's installed ([#3748](https://github.com/expo/eas-cli/pull/3748) by [@kitten](https://github.com/kitten))
+
+### 🧹 Chores
+
+- [worker] Report build phase durations stats. ([#3732](https://github.com/expo/eas-cli/pull/3732) by [@gwdp](https://github.com/gwdp))
+
+## [18.13.1](https://github.com/expo/eas-cli/releases/tag/v18.13.1) - 2026-05-18
+
+### 🎉 New features
+
+- [eas-cli] Send the installed `expo` package version in build metadata. ([#3725](https://github.com/expo/eas-cli/pull/3725) by [@sjchmiela](https://github.com/sjchmiela))
+
+### 🐛 Bug fixes
+
+- [eas-cli] Prevent `npx` invocations that can be unreliable and fail when retrieving entitlements or project configs ([#3282](https://github.com/expo/eas-cli/pull/3282) by [@kitten](https://github.com/kitten))
+
+## [18.13.0](https://github.com/expo/eas-cli/releases/tag/v18.13.0) - 2026-05-14
+
+### 🎉 New features
+
+- [eas-cli] New command `observe:routes` for navigation metrics. ([#3730](https://github.com/expo/eas-cli/pull/3730) by [@douglowder](https://github.com/douglowder))
+
 ### 🧹 Chores
 
 - [eas-cli] Refactor observe commands to extract common flag definitions. ([#3731](https://github.com/expo/eas-cli/pull/3731) by [@douglowder](https://github.com/douglowder))

lerna.json

@@ -1,5 +1,5 @@
 {
   "npmClient": "yarn",
-  "version": "18.13.0",
+  "version": "19.0.1",
   "$schema": "node_modules/lerna/schemas/lerna-schema.json"
 }

packages/build-tools/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/build-tools",
-  "version": "18.12.3",
+  "version": "19.0.0",
   "bugs": "https://github.com/expo/eas-cli/issues",
   "license": "BUSL-1.1",
   "author": "Expo <[email protected]>",
@@ -37,17 +37,17 @@
   "dependencies": {
     "@expo/config": "55.0.10",
     "@expo/config-plugins": "55.0.7",
-    "@expo/downloader": "18.5.0",
-    "@expo/eas-build-job": "18.12.0",
+    "@expo/downloader": "19.0.0",
+    "@expo/eas-build-job": "19.0.0",
     "@expo/env": "^0.4.0",
-    "@expo/logger": "18.5.0",
+    "@expo/logger": "19.0.0",
     "@expo/package-manager": "1.9.10",
     "@expo/plist": "^0.2.0",
     "@expo/results": "^1.0.0",
     "@expo/spawn-async": "1.7.2",
-    "@expo/steps": "18.12.0",
-    "@expo/template-file": "18.5.0",
-    "@expo/turtle-spawn": "18.5.0",
+    "@expo/steps": "19.0.0",
+    "@expo/template-file": "19.0.0",
+    "@expo/turtle-spawn": "19.0.0",
     "@expo/xcpretty": "^4.3.1",
     "@google-cloud/storage": "^7.11.2",
     "@sentry/node": "7.77.0",

packages/build-tools/src/__tests__/context.test.ts

@@ -1,14 +1,36 @@
-import { BuildTrigger, Job, Metadata } from '@expo/eas-build-job';
+import {
+  BuildPhase,
+  BuildPhaseResult,
+  BuildTrigger,
+  Job,
+  Metadata,
+  Platform,
+} from '@expo/eas-build-job';
 import { randomUUID } from 'crypto';
+import fs from 'fs-extra';
 import { vol } from 'memfs';
 
 import { createMockLogger } from './utils/logger';
 import { BuildContext } from '../context';
+import { Datadog } from '../datadog';
 
 jest.mock('fs');
 jest.mock('fs-extra');
+jest.mock('../datadog', () => ({
+  Datadog: {
+    distribution: jest.fn(),
+  },
+}));
+
+const datadogDistributionMock = jest.mocked(Datadog.distribution);
 
 describe('BuildContext', () => {
+  beforeEach(() => {
+    vol.reset();
+    jest.clearAllMocks();
+    (fs.readdir as unknown as jest.Mock).mockResolvedValue([]);
+  });
+
   it('should merge secrets', async () => {
     const robotAccessToken = randomUUID();
     await vol.promises.mkdir('/workingdir/eas-environment-secrets/', { recursive: true });
@@ -116,4 +138,68 @@ describe('BuildContext', () => {
       foo: 'bar',
     });
   });
+
+  it('emits build phase duration metrics for successful build phases', async () => {
+    const ctx = createTestBuildContext({ platform: Platform.IOS });
+
+    await ctx.runBuildPhase(BuildPhase.RUN_FASTLANE, async () => {});
+
+    expect(datadogDistributionMock).toHaveBeenCalledWith(
+      'eas.build.phase_duration',
+      expect.any(Number),
+      {
+        build_phase: 'run_fastlane',
+        platform: Platform.IOS,
+        result: BuildPhaseResult.SUCCESS,
+      }
+    );
+  });
+
+  it('emits build phase duration metrics for failed build phases', async () => {
+    const ctx = createTestBuildContext({ platform: Platform.ANDROID });
+
+    await expect(
+      ctx.runBuildPhase(BuildPhase.INSTALL_DEPENDENCIES, async () => {
+        throw new Error('boom');
+      })
+    ).rejects.toThrow();
+
+    expect(datadogDistributionMock).toHaveBeenCalledWith(
+      'eas.build.phase_duration',
+      expect.any(Number),
+      {
+        build_phase: 'install_dependencies',
+        platform: Platform.ANDROID,
+        result: BuildPhaseResult.FAIL,
+      }
+    );
+  });
+
+  it('does not emit build phase duration metrics for non-platform jobs', async () => {
+    const ctx = createTestBuildContext({});
+
+    await ctx.runBuildPhase(BuildPhase.PREPARE_PROJECT, async () => {});
+
+    expect(datadogDistributionMock).not.toHaveBeenCalled();
+  });
 });
+
+function createTestBuildContext({ platform }: { platform?: Platform }): BuildContext {
+  vol.mkdirSync('/workingdir/env', { recursive: true });
+
+  return new BuildContext(
+    {
+      ...(platform ? { platform } : {}),
+      builderEnvironment: { env: {} },
+    } as Job,
+    {
+      env: {
+        __API_SERVER_URL: 'http://api.expo.test',
+      },
+      workingdir: '/workingdir',
+      logger: createMockLogger(),
+      logBuffer: { getLogs: () => [], getPhaseLogs: () => [] },
+      uploadArtifact: jest.fn(),
+    }
+  );
+}

packages/build-tools/src/__tests__/datadog.test.ts

@@ -0,0 +1,150 @@
+import { Response } from 'node-fetch';
+
+import { Datadog } from '../datadog';
+import { Sentry } from '../sentry';
+import { turtleFetch } from '../utils/turtleFetch';
+
+jest.mock('../sentry', () => ({
+  Sentry: {
+    capture: jest.fn(),
+  },
+}));
+jest.mock('../utils/turtleFetch', () => ({
+  turtleFetch: jest.fn(),
+}));
+
+const turtleFetchMock = jest.mocked(turtleFetch);
+const sentryCaptureMock = jest.mocked(Sentry.capture);
+
+describe('Datadog singleton', () => {
+  beforeEach(() => {
+    jest.clearAllMocks();
+    Datadog.setup(null);
+  });
+
+  it('POSTs distribution metrics to the turtle build metrics endpoint', () => {
+    turtleFetchMock.mockResolvedValueOnce({} as Response);
+
+    Datadog.setup({
+      expoApiV2BaseUrl: 'https://api.expo.test/v2/',
+      turtleBuildId: 'build-id',
+      robotAccessToken: 'token-abc',
+    });
+
+    Datadog.distribution('eas.build.phase_duration', 1234, {
+      build_phase: 'install_dependencies',
+      platform: 'ios',
+      result: 'success',
+    });
+
+    expect(turtleFetchMock).toHaveBeenCalledWith(
+      'https://api.expo.test/v2/turtle-builds/build-id/metrics',
+      'POST',
+      {
+        json: {
+          metrics: [
+            {
+              name: 'eas.build.phase_duration',
+              type: 'distribution',
+              value: 1234,
+              tags: {
+                build_phase: 'install_dependencies',
+                platform: 'ios',
+                result: 'success',
+              },
+            },
+          ],
+        },
+        headers: { Authorization: 'Bearer token-abc' },
+        retries: 2,
+      }
+    );
+  });
+
+  it('is a no-op when setup is null', () => {
+    Datadog.setup(null);
+
+    Datadog.distribution('eas.build.phase_duration', 1);
+
+    expect(turtleFetchMock).not.toHaveBeenCalled();
+  });
+
+  it('swallows upload failures', async () => {
+    turtleFetchMock.mockRejectedValueOnce(new Error('network down'));
+    Datadog.setup({
+      expoApiV2BaseUrl: 'https://api.expo.test/v2/',
+      turtleBuildId: 'build-id',
+      robotAccessToken: 'token-abc',
+    });
+
+    Datadog.distribution('eas.build.phase_duration', 1);
+    await flushPromises();
+
+    expect(turtleFetchMock).toHaveBeenCalled();
+    expect(sentryCaptureMock).toHaveBeenCalledWith(
+      'Failed to report turtle build metric',
+      expect.any(Error),
+      expect.objectContaining({
+        extras: {
+          metrics: [{ name: 'eas.build.phase_duration', type: 'distribution', value: 1, tags: {} }],
+        },
+      })
+    );
+  });
+
+  it('uses the latest setup options', () => {
+    turtleFetchMock.mockResolvedValue({} as Response);
+
+    Datadog.setup({
+      expoApiV2BaseUrl: 'https://api.expo.test/v2/',
+      turtleBuildId: 'first-build-id',
+      robotAccessToken: 'first-token',
+    });
+    Datadog.setup({
+      expoApiV2BaseUrl: 'https://api.expo.test/v2/',
+      turtleBuildId: 'second-build-id',
+      robotAccessToken: 'second-token',
+    });
+
+    Datadog.distribution('eas.build.phase_duration', 1);
+
+    expect(turtleFetchMock).toHaveBeenCalledWith(
+      'https://api.expo.test/v2/turtle-builds/second-build-id/metrics',
+      'POST',
+      expect.objectContaining({
+        headers: { Authorization: 'Bearer second-token' },
+      })
+    );
+  });
+
+  it('flushes pending metric uploads', async () => {
+    let resolveUpload!: (response: Response) => void;
+    turtleFetchMock.mockReturnValueOnce(
+      new Promise<Response>(resolve => {
+        resolveUpload = resolve;
+      })
+    );
+    Datadog.setup({
+      expoApiV2BaseUrl: 'https://api.expo.test/v2/',
+      turtleBuildId: 'build-id',
+      robotAccessToken: 'token-abc',
+    });
+
+    let flushed = false;
+    Datadog.distribution('eas.build.phase_duration', 1);
+    const flushPromise = Datadog.flushAsync().then(() => {
+      flushed = true;
+    });
+    await Promise.resolve();
+    expect(flushed).toBe(false);
+
+    resolveUpload({} as Response);
+    await flushPromise;
+
+    expect(flushed).toBe(true);
+  });
+});
+
+async function flushPromises(): Promise<void> {
+  await new Promise(resolve => setImmediate(resolve));
+}

packages/build-tools/src/android/gradle.ts

@@ -32,18 +32,27 @@ export async function runGradleCommand(
   await fs.chmod(path.join(androidDir, 'gradlew'), 0o755);
   const verboseFlag = ctx.env['EAS_VERBOSE'] === '1' ? '--info' : '';
 
-  const spawnPromise = spawn('bash', ['-c', `./gradlew ${gradleCommand} ${verboseFlag}`], {
-    cwd: androidDir,
-    logger,
-    lineTransformer: (line?: string) => {
-      if (!line || /^\.+$/.exec(line)) {
-        return null;
-      } else {
-        return line;
-      }
-    },
-    env: { ...ctx.env, ...extraEnv, ...resolveVersionOverridesEnvs(ctx), LC_ALL: 'C.UTF-8' },
-  });
+  const spawnPromise = spawn(
+    'bash',
+    ['-c', `./gradlew ${gradleCommand} --profile ${verboseFlag}`],
+    {
+      cwd: androidDir,
+      logger,
+      lineTransformer: (line?: string) => {
+        if (!line || /^\.+$/.exec(line)) {
+          return null;
+        } else {
+          return line;
+        }
+      },
+      env: {
+        ...ctx.env,
+        ...extraEnv,
+        ...resolveVersionOverridesEnvs(ctx),
+        LC_ALL: 'C.UTF-8',
+      },
+    }
+  );
   if (ctx.env.EAS_BUILD_RUNNER === 'eas-build' && process.platform === 'linux') {
     adjustOOMScore(spawnPromise, logger);
   }

packages/build-tools/src/android/gradleProfile.ts

@@ -0,0 +1,231 @@
+import { XMLParser } from 'fast-xml-parser';
+import fs from 'fs-extra';
+import path from 'path';
+
+export interface GradleProfileTask {
+  path: string;
+  durationMs: number;
+  result: string;
+}
+
+export async function parseGradleProfile(androidDir: string): Promise<GradleProfileTask[]> {
+  const profileDir = path.join(androidDir, 'build', 'reports', 'profile');
+  // Gradle profile may not exist for all builds (e.g. custom, repack
+  // jobs). We should short circuit and not unnecessarily log.
+  if (!(await fs.pathExists(profileDir))) {
+    return [];
+  }
+
+  const files = await fs.readdir(profileDir);
+  const htmlFile = files
+    .filter(f => f.startsWith('profile-') && f.endsWith('.html'))
+    .sort()
+    .pop();
+
+  if (!htmlFile) {
+    throw new Error(`No Gradle profile HTML found in ${profileDir}`);
+  }
+
+  const html = await fs.readFile(path.join(profileDir, htmlFile), 'utf8');
+
+  // Locate the <h2>Task Execution</h2> heading and extract its <table>
+  const headingMatch = html.match(/<h2[^>]*>\s*Task Execution\s*<\/h2>/i);
+  if (!headingMatch || headingMatch.index === undefined) {
+    throw new Error('Could not find Task Execution section in Gradle profile');
+  }
+
+  const sectionStart = headingMatch.index;
+  const tableStart = html.indexOf('<table', sectionStart);
+  const tableEnd = html.indexOf('</table>', tableStart);
+  if (tableStart === -1 || tableEnd === -1) {
+    throw new Error('Could not find task execution table in Gradle profile');
+  }
+
+  const tableHtml = html.slice(tableStart, tableEnd + '</table>'.length);
+  const parser = new XMLParser({
+    ignoreAttributes: true,
+    isArray: name => name === 'tr' || name === 'td',
+    trimValues: true,
+  });
+
+  const parsed = parser.parse(tableHtml);
+  const rows: any[] = parsed?.table?.tbody?.tr ?? parsed?.table?.tr ?? [];
+
+  const tasks: GradleProfileTask[] = [];
+  for (const row of rows) {
+    const cells: unknown[] = row?.td;
+    if (!cells || cells.length < 2) {
+      continue;
+    }
+
+    const taskPath = String(cells[0] ?? '').trim();
+    const durationStr = String(cells[1] ?? '').trim();
+    const result = String(cells[2] ?? '').trim() || 'executed';
+
+    if (!taskPath || !durationStr) {
+      continue;
+    }
+
+    const durationMs = parseDurationToMs(durationStr);
+    tasks.push({ path: taskPath, durationMs, result: result.toLowerCase() });
+  }
+
+  return tasks;
+}
+
+function parseDurationToMs(duration: string): number {
+  // Gradle profile durations can be like "1.234s", "0.045s", "12.5s"
+  const secondsMatch = duration.match(/^([\d.]+)s$/);
+  if (secondsMatch) {
+    return Math.round(parseFloat(secondsMatch[1]) * 1000);
+  }
+  return 0;
+}
+
+function formatSeconds(ms: number): string {
+  const s = ms / 1000;
+  if (s < 0.1) {
+    return `${ms}ms`;
+  }
+  return `${s.toFixed(1)}s`;
+}
+
+export function formatGradleProfileReport(tasks: GradleProfileTask[]): string {
+  // Filter out tasks under 1 second
+  const significantTasks = tasks.filter(t => t.durationMs >= 1000);
+
+  // Separate module totals from individual tasks
+  const moduleTotals = significantTasks.filter(t => t.result === '(total)');
+  const individualTasks = significantTasks.filter(t => t.result !== '(total)');
+
+  // Group individual tasks by their module prefix
+  const moduleChildren = new Map<string, GradleProfileTask[]>();
+  const orphanTasks: GradleProfileTask[] = [];
+
+  for (const task of individualTasks) {
+    const parent = moduleTotals.find(m => task.path.startsWith(m.path + ':'));
+    if (parent) {
+      const children = moduleChildren.get(parent.path) ?? [];
+      children.push(task);
+      moduleChildren.set(parent.path, children);
+    } else {
+      orphanTasks.push(task);
+    }
+  }
+
+  // Sort module totals by duration, sort children within each module
+  const sortedModules = [...moduleTotals].sort((a, b) => b.durationMs - a.durationMs);
+  for (const children of moduleChildren.values()) {
+    children.sort((a, b) => b.durationMs - a.durationMs);
+  }
+  orphanTasks.sort((a, b) => b.durationMs - a.durationMs);
+
+  // Build display rows: [displayName, task]
+  const rows: { displayName: string; task: GradleProfileTask }[] = [];
+
+  for (const mod of sortedModules) {
+    rows.push({ displayName: mod.path, task: mod });
+    const children = moduleChildren.get(mod.path) ?? [];
+    for (let i = 0; i < children.length; i++) {
+      const isLast = i === children.length - 1;
+      const prefix = isLast ? '  └─ ' : '  ├─ ';
+      const shortName = children[i].path.slice(mod.path.length + 1);
+      rows.push({ displayName: prefix + shortName, task: children[i] });
+    }
+  }
+
+  for (const task of orphanTasks) {
+    rows.push({ displayName: task.path, task });
+  }
+
+  // Compute totals from individual tasks only (avoid double-counting)
+  const totalMs = individualTasks.reduce((sum, t) => sum + t.durationMs, 0);
+  const maxMs = totalMs || 1;
+
+  const nameWidth = Math.max(4, ...rows.map(r => r.displayName.length)) + 2;
+  const barMaxWidth = 20;
+
+  const header =
+    '┌─' +
+    '─'.repeat(nameWidth) +
+    '─┬────────────┬──────────┬────────────┬─' +
+    '─'.repeat(barMaxWidth) +
+    '─┐';
+  const divider =
+    '├─' +
+    '─'.repeat(nameWidth) +
+    '─┼────────────┼──────────┼────────────┼─' +
+    '─'.repeat(barMaxWidth) +
+    '─┤';
+  const footer =
+    '└─' +
+    '─'.repeat(nameWidth) +
+    '─┴────────────┴──────────┴────────────┴─' +
+    '─'.repeat(barMaxWidth) +
+    '─┘';
+
+  const taskCount = individualTasks.length;
+  const cachedCount = individualTasks.filter(t => t.result !== 'executed').length;
+  const lines: string[] = [];
+
+  lines.push('Gradle Build — Task Execution Profile');
+  const cachedSuffix = cachedCount > 0 ? ` (${cachedCount} cached/up-to-date)` : '';
+  lines.push(`${taskCount} tasks${cachedSuffix}, total task time: ${formatSeconds(totalMs)}`);
+  lines.push('% Time = share of total task execution time');
+  lines.push('');
+  lines.push(header);
+  lines.push(
+    '│ ' +
+      'Task'.padEnd(nameWidth) +
+      ' │ ' +
+      'Duration'.padStart(10) +
+      ' │ ' +
+      '% Time'.padStart(8) +
+      ' │ ' +
+      'Result'.padEnd(10) +
+      ' │ ' +
+      ' '.repeat(barMaxWidth) +
+      ' │'
+  );
+  lines.push(divider);
+
+  for (const row of rows) {
+    const pct = totalMs === 0 ? 0 : (row.task.durationMs / totalMs) * 100;
+    const barLength = Math.round((row.task.durationMs / maxMs) * barMaxWidth);
+    const bar = '█'.repeat(barLength) + '░'.repeat(barMaxWidth - barLength);
+    const result = row.task.result === '(total)' ? 'total' : row.task.result;
+
+    lines.push(
+      '│ ' +
+        row.displayName.padEnd(nameWidth) +
+        ' │ ' +
+        formatSeconds(row.task.durationMs).padStart(10) +
+        ' │ ' +
+        `${pct.toFixed(1)}%`.padStart(8) +
+        ' │ ' +
+        result.padEnd(10) +
+        ' │ ' +
+        bar +
+        ' │'
+    );
+  }
+
+  lines.push(divider);
+  lines.push(
+    '│ ' +
+      'TOTAL'.padEnd(nameWidth) +
+      ' │ ' +
+      formatSeconds(totalMs).padStart(10) +
+      ' │ ' +
+      '100.0%'.padStart(8) +
+      ' │ ' +
+      ' '.repeat(10) +
+      ' │ ' +
+      ' '.repeat(barMaxWidth) +
+      ' │'
+  );
+  lines.push(footer);
+  lines.push('');
+
+  return lines.join('\n');
+}

packages/build-tools/src/builders/ios.ts

@@ -16,6 +16,7 @@ import { runFastlaneGym, runFastlaneResign } from '../ios/fastlane';
 import { installPods } from '../ios/pod';
 import { downloadApplicationArchiveAsync } from '../ios/resign';
 import { resolveArtifactPath, resolveBuildConfiguration, resolveScheme } from '../ios/resolve';
+import { Sentry } from '../sentry';
 import { parseAndReportXcactivitylog } from '../steps/utils/ios/xcactivitylog';
 import { cacheStatsAsync, restoreCcacheAsync } from '../steps/functions/restoreBuildCache';
 import { saveCcacheAsync } from '../steps/functions/saveBuildCache';
@@ -173,17 +174,25 @@ async function buildAsync(ctx: BuildContext<Ios.Job>): Promise<void> {
     });
   }
 
-  if (ctx.env.EXPERIMENTAL_EAS_XCACTIVITYLOG === '1') {
-    const { derivedDataPath, workspacePath } = nullthrows(fastlaneResult);
-    await ctx.runBuildPhase(BuildPhase.PARSE_XCACTIVITYLOG, async () => {
+  await ctx.runBuildPhase(BuildPhase.PARSE_XCACTIVITYLOG, async () => {
+    if (ctx.isLocal) {
+      ctx.logger.info('Local builds skip build performance analysis.');
+      return;
+    }
+    try {
+      const { derivedDataPath, workspacePath } = nullthrows(fastlaneResult);
       await parseAndReportXcactivitylog({
         derivedDataPath,
         workspacePath,
         logger: ctx.logger,
         proxyBaseUrl: ctx.env.EAS_BUILD_COCOAPODS_CACHE_URL,
+        env: ctx.env,
       });
-    });
-  }
+    } catch (err: any) {
+      Sentry.capture('Failed to parse xcactivitylog', err);
+      ctx.markBuildPhaseSkipped();
+    }
+  });
 
   await ctx.runBuildPhase(BuildPhase.PRE_UPLOAD_ARTIFACTS_HOOK, async () => {
     await runHookIfPresent(ctx, Hook.PRE_UPLOAD_ARTIFACTS);

packages/build-tools/src/context.ts

@@ -20,6 +20,7 @@ import fs from 'fs-extra';
 import path from 'path';
 
 import { resolveBuildPhaseErrorAsync } from './buildErrors/detectError';
+import { Datadog } from './datadog';
 import { readAppConfig } from './utils/appConfig';
 import { createTemporaryEnvironmentSecretFile } from './utils/environmentSecrets';
 import { PackageManager, resolvePackageManager } from './utils/packageManager';
@@ -355,6 +356,13 @@ export class BuildContext<TJob extends Job = Job> {
     await this.collectAndUpdateEnvVariablesAsync();
 
     this.reportBuildPhaseStats?.({ buildPhase: this.buildPhase, result, durationMs });
+    if (this.job.platform) {
+      Datadog.distribution('eas.build.phase_duration', durationMs, {
+        build_phase: this.buildPhase.toLowerCase(),
+        platform: this.job.platform,
+        result,
+      });
+    }
 
     if (!doNotMarkEnd) {
       this.logger.info(

packages/build-tools/src/datadog.ts

@@ -0,0 +1,54 @@
+import { Sentry } from './sentry';
+import { turtleFetch } from './utils/turtleFetch';
+
+type DatadogSetupOptions = {
+  expoApiV2BaseUrl: string;
+  turtleBuildId: string;
+  robotAccessToken: string;
+};
+
+let setupOptions: DatadogSetupOptions | null = null;
+let pendingMetricUploads: Promise<unknown>[] = [];
+
+export const Datadog = {
+  setup(opts: DatadogSetupOptions | null): void {
+    setupOptions = opts;
+  },
+
+  distribution(name: string, value: number, tags: Record<string, string> = {}): void {
+    if (!setupOptions) {
+      return;
+    }
+    const { expoApiV2BaseUrl, turtleBuildId, robotAccessToken } = setupOptions;
+    const metrics = [
+      {
+        name,
+        type: 'distribution' as const,
+        value,
+        tags,
+      },
+    ];
+
+    const uploadPromise = turtleFetch(
+      new URL(`turtle-builds/${turtleBuildId}/metrics`, expoApiV2BaseUrl).toString(),
+      'POST',
+      {
+        json: { metrics },
+        headers: {
+          Authorization: `Bearer ${robotAccessToken}`,
+        },
+        retries: 2,
+      }
+    ).catch(err => {
+      Sentry.capture('Failed to report turtle build metric', err, {
+        extras: { metrics },
+      });
+    });
+
+    pendingMetricUploads.push(uploadPromise);
+  },
+
+  async flushAsync(): Promise<void> {
+    await Promise.allSettled(pendingMetricUploads);
+  },
+};

packages/build-tools/src/index.ts

@@ -20,6 +20,10 @@ export { findAndUploadXcodeBuildLogsAsync } from './ios/xcodeBuildLogs';
 
 export { Hook, runHookIfPresent } from './utils/hooks';
 
+export { parseGradleProfile, formatGradleProfileReport } from './android/gradleProfile';
+export type { GradleProfileTask } from './android/gradleProfile';
+
 export * from './generic';
 
+export { Datadog } from './datadog';
 export { Sentry } from './sentry';

packages/build-tools/src/ios/__tests__/pod.test.ts

@@ -1,5 +1,6 @@
-import { Ios } from '@expo/eas-build-job';
+import { Ios, getInstalledExpoPackageVersionAsync } from '@expo/eas-build-job';
 import spawn from '@expo/turtle-spawn';
+import fs from 'fs-extra';
 import { vol } from 'memfs';
 import path from 'path';
 
@@ -8,6 +9,10 @@ import { createMockLogger } from '../../__tests__/utils/logger';
 import { BuildContext } from '../../context';
 import { installPods } from '../pod';
 
+jest.mock('@expo/eas-build-job', () => ({
+  ...jest.requireActual('@expo/eas-build-job'),
+  getInstalledExpoPackageVersionAsync: jest.fn(),
+}));
 jest.mock('@expo/turtle-spawn', () => ({
   __esModule: true,
   default: jest.fn(),
@@ -61,14 +66,10 @@ function makeIosBuildContext({
 describe(installPods, () => {
   beforeEach(() => {
     vol.reset();
-    (spawn as jest.Mock).mockImplementation(command => {
-      if (command === 'node') {
-        return Promise.resolve({
-          stdout: Buffer.from(path.join(PROJECT_DIR, 'node_modules/expo/package.json')),
-        });
-      }
-      return Promise.resolve(undefined);
+    jest.mocked(getInstalledExpoPackageVersionAsync).mockImplementation(async ({ projectDir }) => {
+      return (await fs.readJson(path.join(projectDir, 'node_modules/expo/package.json'))).version;
     });
+    (spawn as jest.Mock).mockResolvedValue(undefined);
   });
 
   it('adds precompiled modules env var for Expo versions well above the minimum', async () => {
@@ -76,17 +77,12 @@ describe(installPods, () => {
 
     await installPods(ctx, {});
 
-    expect(spawn).toHaveBeenCalledWith(
-      'node',
-      ['--print', "require.resolve('expo/package.json')"],
-      expect.objectContaining({
-        cwd: PROJECT_DIR,
-        env: expect.objectContaining({
-          __API_SERVER_URL: 'http://api.expo.test',
-        }),
-        stdio: 'pipe',
-      })
-    );
+    expect(getInstalledExpoPackageVersionAsync).toHaveBeenCalledWith({
+      env: expect.objectContaining({
+        __API_SERVER_URL: 'http://api.expo.test',
+      }),
+      projectDir: PROJECT_DIR,
+    });
     expect(spawn).toHaveBeenCalledWith(
       'pod',
       ['install'],
@@ -134,7 +130,7 @@ describe(installPods, () => {
 
     await installPods(ctx, {});
 
-    expect((spawn as jest.Mock).mock.calls[1][2].env.EXPO_USE_PRECOMPILED_MODULES).toBeUndefined();
+    expect((spawn as jest.Mock).mock.calls[0][2].env.EXPO_USE_PRECOMPILED_MODULES).toBeUndefined();
     expect(ctx.logger.info).toHaveBeenCalledWith(
       expect.stringMatching(
         /^Detected expo=55\.0\.17; not enabling precompiled modules use because precompiled modules require expo>=/
@@ -147,7 +143,7 @@ describe(installPods, () => {
 
     await installPods(ctx, {});
 
-    expect((spawn as jest.Mock).mock.calls[1][2].env.EXPO_USE_PRECOMPILED_MODULES).toBeUndefined();
+    expect((spawn as jest.Mock).mock.calls[0][2].env.EXPO_USE_PRECOMPILED_MODULES).toBeUndefined();
     expect(ctx.logger.info).toHaveBeenCalledWith(
       'Detected expo=invalid-version; not enabling precompiled modules use because the installed Expo package version is not a valid semver version.'
     );
@@ -158,7 +154,7 @@ describe(installPods, () => {
 
     await installPods(ctx, {});
 
-    expect((spawn as jest.Mock).mock.calls[1][2].env.EXPO_USE_PRECOMPILED_MODULES).toBeUndefined();
+    expect((spawn as jest.Mock).mock.calls[0][2].env.EXPO_USE_PRECOMPILED_MODULES).toBeUndefined();
     expect(ctx.logger.info).toHaveBeenCalledWith(
       expect.objectContaining({ err: expect.objectContaining({ code: 'ENOENT' }) }),
       'Failed to detect installed Expo package version; not enabling precompiled modules use.'

packages/build-tools/src/ios/pod.ts

@@ -1,6 +1,5 @@
-import { Env, Ios } from '@expo/eas-build-job';
+import { Env, Ios, getInstalledExpoPackageVersionAsync } from '@expo/eas-build-job';
 import spawn, { SpawnOptions, SpawnPromise, SpawnResult } from '@expo/turtle-spawn';
-import fs from 'fs-extra';
 import path from 'path';
 import semver from 'semver';
 
@@ -53,7 +52,10 @@ async function resolvePrecompiledModulesPodInstallEnvAsync<TJob extends Ios.Job>
 
   let expoPackageVersion: string;
   try {
-    expoPackageVersion = await getInstalledExpoPackageVersionAsync(ctx);
+    expoPackageVersion = await getInstalledExpoPackageVersionAsync({
+      env: ctx.env,
+      projectDir: ctx.getReactNativeProjectDirectory(),
+    });
   } catch (err) {
     ctx.logger.info(
       { err },
@@ -93,18 +95,6 @@ async function resolvePrecompiledModulesPodInstallEnvAsync<TJob extends Ios.Job>
   return env;
 }
 
-async function getInstalledExpoPackageVersionAsync<TJob extends Ios.Job>(
-  ctx: BuildContext<TJob>
-): Promise<string> {
-  const { stdout } = await spawn('node', ['--print', "require.resolve('expo/package.json')"], {
-    cwd: ctx.getReactNativeProjectDirectory(),
-    env: ctx.env,
-    stdio: 'pipe',
-  });
-  const expoPackageJsonPath = stdout.toString().trim();
-  return (await fs.readJson(expoPackageJsonPath)).version;
-}
-
 function getPrecompiledModulesBaseUrl<TJob extends Ios.Job>(ctx: BuildContext<TJob>): string {
   if (!ctx.env.EAS_BUILD_COCOAPODS_CACHE_URL) {
     return PRECOMPILED_MODULES_BASE_URL;

packages/build-tools/src/steps/functions/parseXcactivitylog.ts

@@ -45,6 +45,7 @@ export function parseXcactivitylogFunction(): BuildFunction {
         xclogparserVersion: version,
         logger: stepCtx.logger,
         proxyBaseUrl: env.EAS_BUILD_COCOAPODS_CACHE_URL,
+        env,
       });
     },
   });

packages/build-tools/src/steps/utils/android/gradle.ts

@@ -23,18 +23,27 @@ export async function runGradleCommand({
 
   logger.info(`Running 'gradlew ${gradleCommand} ${verboseFlag}' in ${androidDir}`);
   await fs.chmod(path.join(androidDir, 'gradlew'), 0o755);
-  const spawnPromise = spawn('bash', ['-c', `./gradlew ${gradleCommand} ${verboseFlag}`], {
-    cwd: androidDir,
-    logger,
-    lineTransformer: (line?: string) => {
-      if (!line || /^\.+$/.exec(line)) {
-        return null;
-      } else {
-        return line;
-      }
-    },
-    env: { ...env, ...extraEnv, LC_ALL: 'C.UTF-8' },
-  });
+
+  const spawnPromise = spawn(
+    'bash',
+    ['-c', `./gradlew ${gradleCommand} --profile ${verboseFlag}`],
+    {
+      cwd: androidDir,
+      logger,
+      lineTransformer: (line?: string) => {
+        if (!line || /^\.+$/.exec(line)) {
+          return null;
+        } else {
+          return line;
+        }
+      },
+      env: {
+        ...env,
+        ...extraEnv,
+        LC_ALL: 'C.UTF-8',
+      },
+    }
+  );
   if (env.EAS_BUILD_RUNNER === 'eas-build' && process.platform === 'linux') {
     adjustOOMScore(spawnPromise, logger);
   }

packages/build-tools/src/steps/utils/ios/__tests__/xcactivitylog.test.ts

@@ -195,6 +195,8 @@ const FIXTURE_OVERLAP_WITH_GAP = {
 const mockedDownloadFile = jest.mocked(downloadFile);
 const mockedSpawn = jest.mocked(spawn);
 
+const TEST_ENV = { PATH: '/custom/bin:/usr/bin' };
+
 function mockFilesystem({
   tempDir = '/tmp/xclogparser-123',
   jsonOutput = JSON.stringify(FIXTURE_TWO_MODULES),
@@ -224,32 +226,38 @@ describe('parseAndReportXcactivitylog', () => {
     jest.restoreAllMocks();
   });
 
-  it('downloads xclogparser from GCS and logs only the final report on success', async () => {
+  it('downloads xclogparser from GCS and logs resolution + final report when no binary is preinstalled', async () => {
     const logger = createMockLogger();
     const { tempDir, reportPath } = mockFilesystem();
 
     mockedDownloadFile.mockResolvedValue(undefined);
+    mockedSpawn.mockRejectedValueOnce(new Error('xclogparser not found'));
     mockedSpawn.mockResolvedValue({ stdout: '', stderr: '' } as any);
 
     await parseAndReportXcactivitylog({
       derivedDataPath: '/tmp/derived-data',
       workspacePath: '/tmp/workspace',
       logger,
+      env: TEST_ENV,
     });
 
+    expect(mockedSpawn).toHaveBeenNthCalledWith(1, 'xclogparser', ['version'], {
+      stdio: 'pipe',
+      env: TEST_ENV,
+    });
     expect(mockedDownloadFile).toHaveBeenCalledWith(
       'https://storage.googleapis.com/turtle-v2/xclogparser/XCLogParser-macOS-x86-64-arm64-v0.2.47.zip',
       path.join(tempDir, 'XCLogParser-macOS-x86-64-arm64-v0.2.47.zip'),
       { retry: 3, timeout: 20_000 }
     );
     expect(mockedSpawn).toHaveBeenNthCalledWith(
-      1,
+      2,
       'unzip',
       ['-q', path.join(tempDir, 'XCLogParser-macOS-x86-64-arm64-v0.2.47.zip'), '-d', tempDir],
-      { stdio: 'pipe' }
+      { stdio: 'pipe', env: TEST_ENV }
     );
     expect(mockedSpawn).toHaveBeenNthCalledWith(
-      2,
+      3,
       path.join(tempDir, 'xclogparser'),
       [
         'parse',
@@ -262,10 +270,10 @@ describe('parseAndReportXcactivitylog', () => {
         '--output',
         reportPath,
       ],
-      { stdio: 'pipe' }
+      { stdio: 'pipe', env: TEST_ENV }
     );
     expect(fs.readFile).toHaveBeenCalledWith(reportPath, 'utf8');
-    expect(logger.info).toHaveBeenCalledTimes(1);
+    expect(logger.info).toHaveBeenCalledWith('Using downloaded xclogparser v0.2.47.');
     expect(logger.info).toHaveBeenCalledWith(
       expect.stringContaining('Xcode Build — Compile Metrics by Module')
     );
@@ -281,6 +289,7 @@ describe('parseAndReportXcactivitylog', () => {
     mockedDownloadFile
       .mockRejectedValueOnce(new Error('proxy failed'))
       .mockResolvedValueOnce(undefined);
+    mockedSpawn.mockRejectedValueOnce(new Error('xclogparser not found'));
     mockedSpawn.mockResolvedValue({ stdout: '', stderr: '' } as any);
 
     await parseAndReportXcactivitylog({
@@ -288,6 +297,7 @@ describe('parseAndReportXcactivitylog', () => {
       workspacePath: '/tmp/workspace',
       logger,
       proxyBaseUrl: 'https://cache.example.com',
+      env: TEST_ENV,
     });
 
     expect(mockedDownloadFile).toHaveBeenNthCalledWith(
@@ -315,6 +325,7 @@ describe('parseAndReportXcactivitylog', () => {
 
     mockedDownloadFile.mockResolvedValue(undefined);
     mockedSpawn
+      .mockRejectedValueOnce(new Error('xclogparser not found'))
       .mockRejectedValueOnce(new Error('invalid zip'))
       .mockResolvedValueOnce({ stdout: '', stderr: '' } as any)
       .mockResolvedValueOnce({ stdout: '', stderr: '' } as any);
@@ -324,6 +335,7 @@ describe('parseAndReportXcactivitylog', () => {
       workspacePath: '/tmp/workspace',
       logger,
       proxyBaseUrl: 'https://cache.example.com',
+      env: TEST_ENV,
     });
 
     expect(mockedDownloadFile).toHaveBeenNthCalledWith(
@@ -353,6 +365,7 @@ describe('parseAndReportXcactivitylog', () => {
     mockFilesystem({ jsonOutput: '{not valid json' });
 
     mockedDownloadFile.mockResolvedValue(undefined);
+    mockedSpawn.mockRejectedValueOnce(new Error('xclogparser not found'));
     mockedSpawn.mockResolvedValue({ stdout: '', stderr: '' } as any);
 
     await expect(
@@ -360,6 +373,7 @@ describe('parseAndReportXcactivitylog', () => {
         derivedDataPath: '/tmp/derived-data',
         workspacePath: '/tmp/workspace',
         logger,
+        env: TEST_ENV,
       })
     ).resolves.toBeUndefined();
 
@@ -382,6 +396,7 @@ describe('parseAndReportXcactivitylog', () => {
     });
 
     mockedDownloadFile.mockResolvedValue(undefined);
+    mockedSpawn.mockRejectedValueOnce(new Error('xclogparser not found'));
     mockedSpawn.mockResolvedValue({ stdout: '', stderr: '' } as any);
 
     await expect(
@@ -389,6 +404,7 @@ describe('parseAndReportXcactivitylog', () => {
         derivedDataPath: '/tmp/derived-data',
         workspacePath: '/tmp/workspace',
         logger,
+        env: TEST_ENV,
       })
     ).resolves.toBeUndefined();
 
@@ -407,6 +423,7 @@ describe('parseAndReportXcactivitylog', () => {
 
     mockedDownloadFile.mockResolvedValue(undefined);
     mockedSpawn
+      .mockRejectedValueOnce(new Error('xclogparser not found')) // version detect
       .mockResolvedValueOnce({ stdout: '', stderr: '' } as any) // unzip
       .mockRejectedValueOnce(new Error('spawn xclogparser ENOENT')); // xclogparser run
 
@@ -415,6 +432,7 @@ describe('parseAndReportXcactivitylog', () => {
         derivedDataPath: '/tmp/derived-data',
         workspacePath: '/tmp/workspace',
         logger,
+        env: TEST_ENV,
       })
     ).resolves.toBeUndefined();
 
@@ -432,6 +450,7 @@ describe('parseAndReportXcactivitylog', () => {
     mockFilesystem();
 
     mockedDownloadFile.mockRejectedValue(new Error('network unreachable'));
+    mockedSpawn.mockRejectedValueOnce(new Error('xclogparser not found'));
     mockedSpawn.mockResolvedValue({ stdout: '', stderr: '' } as any);
 
     await expect(
@@ -439,6 +458,7 @@ describe('parseAndReportXcactivitylog', () => {
         derivedDataPath: '/tmp/derived-data',
         workspacePath: '/tmp/workspace',
         logger,
+        env: TEST_ENV,
       })
     ).resolves.toBeUndefined();
 
@@ -459,6 +479,7 @@ describe('parseAndReportXcactivitylog', () => {
     });
 
     mockedDownloadFile.mockResolvedValue(undefined);
+    mockedSpawn.mockRejectedValueOnce(new Error('xclogparser not found'));
     mockedSpawn.mockResolvedValue({ stdout: '', stderr: '' } as any);
 
     await expect(
@@ -466,13 +487,171 @@ describe('parseAndReportXcactivitylog', () => {
         derivedDataPath: '/tmp/derived-data',
         workspacePath: '/tmp/workspace',
         logger,
+        env: TEST_ENV,
       })
     ).resolves.toBeUndefined();
 
-    expect(logger.info).toHaveBeenCalledTimes(1);
     expect(logger.debug).not.toHaveBeenCalled();
     expect(logger.warn).not.toHaveBeenCalled();
   });
+
+  describe('xclogparser version resolution', () => {
+    it('uses preinstalled binary when no version is requested', async () => {
+      const logger = createMockLogger();
+      const { reportPath } = mockFilesystem();
+
+      mockedSpawn
+        .mockResolvedValueOnce({ stdout: 'XCLogParser 0.2.50\n', stderr: '' } as any) // version detect
+        .mockResolvedValueOnce({ stdout: '', stderr: '' } as any); // xclogparser parse
+
+      await parseAndReportXcactivitylog({
+        derivedDataPath: '/tmp/derived-data',
+        workspacePath: '/tmp/workspace',
+        logger,
+        env: TEST_ENV,
+      });
+
+      expect(mockedDownloadFile).not.toHaveBeenCalled();
+      expect(mockedSpawn).not.toHaveBeenCalledWith('unzip', expect.any(Array), expect.any(Object));
+      expect(mockedSpawn).toHaveBeenNthCalledWith(
+        2,
+        'xclogparser',
+        [
+          'parse',
+          '--derived_data',
+          '/tmp/derived-data',
+          '--workspace',
+          '/tmp/workspace',
+          '--reporter',
+          'json',
+          '--output',
+          reportPath,
+        ],
+        { stdio: 'pipe', env: TEST_ENV }
+      );
+      expect(logger.info).toHaveBeenCalledWith('Using preinstalled xclogparser v0.2.50.');
+      expect(logger.info).not.toHaveBeenCalledWith(expect.stringContaining('downloaded'));
+      expect(Sentry.capture).not.toHaveBeenCalled();
+    });
+
+    it('downloads default version when no version requested and no preinstall found', async () => {
+      const logger = createMockLogger();
+      mockFilesystem();
+
+      mockedDownloadFile.mockResolvedValue(undefined);
+      mockedSpawn.mockRejectedValueOnce(new Error('xclogparser not found'));
+      mockedSpawn.mockResolvedValue({ stdout: '', stderr: '' } as any);
+
+      await parseAndReportXcactivitylog({
+        derivedDataPath: '/tmp/derived-data',
+        workspacePath: '/tmp/workspace',
+        logger,
+        env: TEST_ENV,
+      });
+
+      expect(mockedDownloadFile).toHaveBeenCalledWith(
+        expect.stringContaining('XCLogParser-macOS-x86-64-arm64-v0.2.47.zip'),
+        expect.any(String),
+        expect.any(Object)
+      );
+      expect(logger.info).toHaveBeenCalledWith('Using downloaded xclogparser v0.2.47.');
+    });
+
+    it('uses preinstalled binary when requested version matches', async () => {
+      const logger = createMockLogger();
+      mockFilesystem();
+
+      mockedSpawn
+        .mockResolvedValueOnce({ stdout: 'XCLogParser 0.2.50\n', stderr: '' } as any) // version detect
+        .mockResolvedValueOnce({ stdout: '', stderr: '' } as any); // xclogparser parse
+
+      await parseAndReportXcactivitylog({
+        derivedDataPath: '/tmp/derived-data',
+        workspacePath: '/tmp/workspace',
+        xclogparserVersion: 'v0.2.50',
+        logger,
+        env: TEST_ENV,
+      });
+
+      expect(mockedDownloadFile).not.toHaveBeenCalled();
+      expect(logger.info).toHaveBeenCalledWith('Using preinstalled xclogparser v0.2.50.');
+      expect(logger.info).not.toHaveBeenCalledWith(expect.stringContaining('downloaded'));
+    });
+
+    it('downloads requested version when it does not match the preinstalled binary', async () => {
+      const logger = createMockLogger();
+      mockFilesystem();
+
+      mockedDownloadFile.mockResolvedValue(undefined);
+      mockedSpawn
+        .mockResolvedValueOnce({ stdout: 'XCLogParser 0.2.48\n', stderr: '' } as any) // version detect
+        .mockResolvedValueOnce({ stdout: '', stderr: '' } as any) // unzip
+        .mockResolvedValueOnce({ stdout: '', stderr: '' } as any); // xclogparser parse
+
+      await parseAndReportXcactivitylog({
+        derivedDataPath: '/tmp/derived-data',
+        workspacePath: '/tmp/workspace',
+        xclogparserVersion: 'v0.2.50',
+        logger,
+        env: TEST_ENV,
+      });
+
+      expect(mockedDownloadFile).toHaveBeenCalledWith(
+        expect.stringContaining('XCLogParser-macOS-x86-64-arm64-v0.2.50.zip'),
+        expect.any(String),
+        expect.any(Object)
+      );
+      expect(logger.info).toHaveBeenCalledWith('Using downloaded xclogparser v0.2.50.');
+    });
+
+    it('downloads requested version when no preinstall is found', async () => {
+      const logger = createMockLogger();
+      mockFilesystem();
+
+      mockedDownloadFile.mockResolvedValue(undefined);
+      mockedSpawn.mockRejectedValueOnce(new Error('xclogparser not found'));
+      mockedSpawn.mockResolvedValue({ stdout: '', stderr: '' } as any);
+
+      await parseAndReportXcactivitylog({
+        derivedDataPath: '/tmp/derived-data',
+        workspacePath: '/tmp/workspace',
+        xclogparserVersion: 'v0.2.50',
+        logger,
+        env: TEST_ENV,
+      });
+
+      expect(mockedDownloadFile).toHaveBeenCalledWith(
+        expect.stringContaining('XCLogParser-macOS-x86-64-arm64-v0.2.50.zip'),
+        expect.any(String),
+        expect.any(Object)
+      );
+      expect(logger.info).toHaveBeenCalledWith('Using downloaded xclogparser v0.2.50.');
+    });
+
+    it('falls back to download when the version output cannot be parsed', async () => {
+      const logger = createMockLogger();
+      mockFilesystem();
+
+      mockedDownloadFile.mockResolvedValue(undefined);
+      mockedSpawn
+        .mockResolvedValueOnce({ stdout: 'something unexpected', stderr: '' } as any) // version detect
+        .mockResolvedValue({ stdout: '', stderr: '' } as any);
+
+      await parseAndReportXcactivitylog({
+        derivedDataPath: '/tmp/derived-data',
+        workspacePath: '/tmp/workspace',
+        logger,
+        env: TEST_ENV,
+      });
+
+      expect(mockedDownloadFile).toHaveBeenCalledWith(
+        expect.stringContaining('XCLogParser-macOS-x86-64-arm64-v0.2.47.zip'),
+        expect.any(String),
+        expect.any(Object)
+      );
+      expect(logger.info).toHaveBeenCalledWith('Using downloaded xclogparser v0.2.47.');
+    });
+  });
 });
 
 describe('isCompileStep', () => {

packages/build-tools/src/steps/utils/ios/xcactivitylog.ts

@@ -1,6 +1,7 @@
 import downloadFile from '@expo/downloader';
 import { bunyan } from '@expo/logger';
 import { asyncResult } from '@expo/results';
+import { BuildStepEnv } from '@expo/steps';
 import spawn from '@expo/turtle-spawn';
 import fs from 'fs-extra';
 import os from 'os';
@@ -22,35 +23,54 @@ const XCLOGPARSER_OUTPUT_FILENAME = 'xcactivitylog.json';
 export async function parseAndReportXcactivitylog({
   derivedDataPath,
   workspacePath,
-  xclogparserVersion = DEFAULT_XCLOGPARSER_VERSION,
+  xclogparserVersion,
   logger,
   proxyBaseUrl,
+  env,
 }: {
   derivedDataPath: string;
   workspacePath: string;
   xclogparserVersion?: string;
   logger: bunyan;
   proxyBaseUrl?: string;
+  env: BuildStepEnv;
 }): Promise<void> {
   let tempDir: string | undefined;
   let phase = 'creating_temp_directory';
   try {
     tempDir = await fs.mkdtemp(path.join(os.tmpdir(), 'xclogparser-'));
 
-    phase = 'downloading_xclogparser';
-    const xclogparserPath = await downloadXclogparser(
-      tempDir,
-      xclogparserVersion,
-      logger,
-      proxyBaseUrl
-    );
+    phase = 'resolving_xclogparser';
+    const preinstalledVersion = await detectPreinstalledXclogparserVersion(env);
+    let binaryPath: string;
+    let resolvedVersion: string;
+    if (
+      preinstalledVersion &&
+      (!xclogparserVersion || preinstalledVersion === xclogparserVersion)
+    ) {
+      binaryPath = 'xclogparser';
+      resolvedVersion = preinstalledVersion;
+      logger.info(`Using preinstalled xclogparser ${resolvedVersion}.`);
+    } else {
+      phase = 'downloading_xclogparser';
+      resolvedVersion = xclogparserVersion ?? DEFAULT_XCLOGPARSER_VERSION;
+      binaryPath = await downloadXclogparser({
+        tempDir,
+        version: resolvedVersion,
+        logger,
+        proxyBaseUrl,
+        env,
+      });
+      logger.info(`Using downloaded xclogparser ${resolvedVersion}.`);
+    }
 
     phase = 'running_xclogparser';
     const jsonOutputPath = await runXclogparser({
-      binaryPath: xclogparserPath,
+      binaryPath,
       derivedDataPath,
       workspacePath,
       outputDir: tempDir,
+      env,
     });
 
     phase = 'parsing_xclogparser_output';
@@ -70,12 +90,28 @@ export async function parseAndReportXcactivitylog({
   }
 }
 
-async function downloadXclogparser(
-  tempDir: string,
-  version: string,
-  logger: bunyan,
-  proxyBaseUrl?: string
-): Promise<string> {
+async function detectPreinstalledXclogparserVersion(env: BuildStepEnv): Promise<string | null> {
+  const result = await asyncResult(spawn('xclogparser', ['version'], { stdio: 'pipe', env }));
+  if (!result.ok) {
+    return null;
+  }
+  const match = result.value.stdout.match(/(\d+\.\d+\.\d+)/);
+  return match ? `v${match[1]}` : null;
+}
+
+async function downloadXclogparser({
+  tempDir,
+  version,
+  logger,
+  proxyBaseUrl,
+  env,
+}: {
+  tempDir: string;
+  version: string;
+  logger: bunyan;
+  proxyBaseUrl?: string;
+  env: BuildStepEnv;
+}): Promise<string> {
   const zipName = getXclogparserZipName(version);
   const zipPath = path.join(tempDir, zipName);
   const directUrl = `${XCLOGPARSER_DOWNLOAD_URL}/${zipName}`;
@@ -83,7 +119,7 @@ async function downloadXclogparser(
 
   if (proxiedUrl) {
     const proxiedDownloadResult = await asyncResult(
-      downloadAndUnpackXclogparser({ tempDir, zipPath, sourceUrl: proxiedUrl })
+      downloadAndUnpackXclogparser({ tempDir, zipPath, sourceUrl: proxiedUrl, env })
     );
     if (!proxiedDownloadResult.ok) {
       logger.debug(
@@ -96,31 +132,35 @@ async function downloadXclogparser(
     }
   }
 
-  return await downloadAndUnpackXclogparser({ tempDir, zipPath, sourceUrl: directUrl });
+  return await downloadAndUnpackXclogparser({ tempDir, zipPath, sourceUrl: directUrl, env });
 }
 
 async function downloadAndUnpackXclogparser({
   tempDir,
   zipPath,
   sourceUrl,
+  env,
 }: {
   tempDir: string;
   zipPath: string;
   sourceUrl: string;
+  env: BuildStepEnv;
 }): Promise<string> {
   await downloadFile(sourceUrl, zipPath, { retry: 3, timeout: XCLOGPARSER_DOWNLOAD_TIMEOUT_MS });
 
-  return await unpackXclogparser({ tempDir, zipPath });
+  return await unpackXclogparser({ tempDir, zipPath, env });
 }
 
 async function unpackXclogparser({
   tempDir,
   zipPath,
+  env,
 }: {
   tempDir: string;
   zipPath: string;
+  env: BuildStepEnv;
 }): Promise<string> {
-  await spawn('unzip', ['-q', zipPath, '-d', tempDir], { stdio: 'pipe' });
+  await spawn('unzip', ['-q', zipPath, '-d', tempDir], { stdio: 'pipe', env });
 
   const binaryPath = path.join(tempDir, 'xclogparser');
   await fs.chmod(binaryPath, 0o755);
@@ -143,11 +183,13 @@ async function runXclogparser({
   derivedDataPath,
   workspacePath,
   outputDir,
+  env,
 }: {
   binaryPath: string;
   derivedDataPath: string;
   workspacePath: string;
   outputDir: string;
+  env: BuildStepEnv;
 }): Promise<string> {
   const outputPath = path.join(outputDir, XCLOGPARSER_OUTPUT_FILENAME);
 
@@ -164,7 +206,7 @@ async function runXclogparser({
       '--output',
       outputPath,
     ],
-    { stdio: 'pipe' }
+    { stdio: 'pipe', env }
   );
 
   return outputPath;
@@ -420,7 +462,7 @@ export function formatReport(data: XcactivitylogData): string {
       ' │ ' +
       '100.0%'.padStart(pctWidth) +
       ' │ ' +
-      'n/a'.padStart(wallWidth) +
+      ' '.repeat(wallWidth) +
       ' │ ' +
       ' '.repeat(barMaxWidth) +
       ' │'

packages/build-tools/src/steps/utils/remoteDeviceRunSession.ts

@@ -123,7 +123,16 @@ export async function startServeSimWithTunnelAsync({
   logger.info('Launching serve-sim with tunnel.');
   const serveSim = spawnDetached({
     command: 'npx',
-    args: ['serve-sim-szdziedzic@latest', '--tunnel'],
+    args: [
+      'serve-sim-szdziedzic@latest',
+      '--tunnel',
+      '--tunnel-protocol',
+      'quic',
+      '--stream-max-dimension',
+      '1280',
+      '--stream-quality',
+      '0.55',
+    ],
     env,
   });
 

packages/create-eas-build-function/package.json

@@ -1,6 +1,6 @@
 {
   "name": "create-eas-build-function",
-  "version": "18.12.0",
+  "version": "19.0.0",
   "description": "Create functions for use in EAS Build custom builds.",
   "keywords": [
     "expo",
@@ -35,7 +35,7 @@
     "clean": "rimraf ./build/ \"*.tsbuildinfo\""
   },
   "dependencies": {
-    "@expo/steps": "18.12.0"
+    "@expo/steps": "19.0.0"
   },
   "devDependencies": {
     "@expo/package-manager": "1.9.10",

packages/downloader/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/downloader",
-  "version": "18.5.0",
+  "version": "19.0.0",
   "bugs": "https://github.com/expo/eas-cli/issues",
   "license": "BUSL-1.1",
   "author": "Expo <[email protected]>",

packages/eas-build-cache-provider/package.json

@@ -1,6 +1,6 @@
 {
   "name": "eas-build-cache-provider",
-  "version": "18.5.0",
+  "version": "19.0.0",
   "description": "A build cache provider plugin for the Expo CLI",
   "homepage": "https://github.com/expo/eas-cli",
   "bugs": "https://github.com/expo/eas-cli/issues",

packages/eas-build-job/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/eas-build-job",
-  "version": "18.12.0",
+  "version": "19.0.0",
   "bugs": "https://github.com/expo/eas-cli/issues",
   "license": "MIT",
   "author": "Expo <[email protected]>",
@@ -25,7 +25,9 @@
     "clean": "rimraf node_modules dist coverage \"*.tsbuildinfo\""
   },
   "dependencies": {
-    "@expo/logger": "18.5.0",
+    "@expo/logger": "19.0.0",
+    "@expo/results": "1.0.0",
+    "@expo/turtle-spawn": "19.0.0",
     "joi": "^17.13.1",
     "semver": "^7.6.2",
     "zod": "^4.3.5"

packages/eas-build-job/src/__tests__/projectPackage.test.ts

@@ -0,0 +1,77 @@
+import fs from 'fs/promises';
+import os from 'os';
+import path from 'path';
+
+import { errors } from '..';
+import { getInstalledExpoPackageVersionAsync } from '../projectPackage';
+
+describe(getInstalledExpoPackageVersionAsync, () => {
+  it('returns the installed expo package version resolved by project node', async () => {
+    const projectDir = await fs.mkdtemp(path.join(os.tmpdir(), 'eas-build-job-package-test-'));
+    try {
+      await fs.mkdir(path.join(projectDir, 'node_modules/expo'), { recursive: true });
+      await fs.writeFile(
+        path.join(projectDir, 'node_modules/expo/package.json'),
+        JSON.stringify({ version: '55.0.17' })
+      );
+
+      await expect(getInstalledExpoPackageVersionAsync({ projectDir })).resolves.toBe('55.0.17');
+    } finally {
+      await fs.rm(projectDir, { recursive: true, force: true });
+    }
+  });
+
+  it('rejects when expo cannot be resolved from the project', async () => {
+    const projectDir = await fs.mkdtemp(path.join(os.tmpdir(), 'eas-build-job-package-test-'));
+    try {
+      await expect(getInstalledExpoPackageVersionAsync({ projectDir })).rejects.toMatchObject({
+        errorCode: 'EAS_BUILD_EXPO_PACKAGE_VERSION_NOT_FOUND',
+      });
+      await expect(getInstalledExpoPackageVersionAsync({ projectDir })).rejects.toBeInstanceOf(
+        errors.UserError
+      );
+    } finally {
+      await fs.rm(projectDir, { recursive: true, force: true });
+    }
+  });
+
+  it('rejects when expo package.json cannot be read', async () => {
+    const projectDir = await fs.mkdtemp(path.join(os.tmpdir(), 'eas-build-job-package-test-'));
+    try {
+      await fs.mkdir(path.join(projectDir, 'node_modules/expo'), { recursive: true });
+      await fs.writeFile(
+        path.join(projectDir, 'node_modules/expo/package.json'),
+        JSON.stringify({ version: '55.0.17' })
+      );
+      jest.spyOn(fs, 'readFile').mockRejectedValueOnce(new Error('read failed'));
+
+      const promise = getInstalledExpoPackageVersionAsync({ projectDir });
+      await expect(promise).rejects.toMatchObject({
+        errorCode: 'EAS_BUILD_EXPO_PACKAGE_VERSION_READ_FAILED',
+      });
+      await expect(promise).rejects.toBeInstanceOf(errors.UserError);
+    } finally {
+      await fs.rm(projectDir, { recursive: true, force: true });
+    }
+  });
+
+  it('rejects when the installed expo package version is not valid semver', async () => {
+    const projectDir = await fs.mkdtemp(path.join(os.tmpdir(), 'eas-build-job-package-test-'));
+    try {
+      await fs.mkdir(path.join(projectDir, 'node_modules/expo'), { recursive: true });
+      await fs.writeFile(
+        path.join(projectDir, 'node_modules/expo/package.json'),
+        JSON.stringify({ version: 'invalid-version' })
+      );
+
+      await expect(getInstalledExpoPackageVersionAsync({ projectDir })).rejects.toMatchObject({
+        errorCode: 'EAS_BUILD_EXPO_PACKAGE_VERSION_INVALID',
+      });
+      await expect(getInstalledExpoPackageVersionAsync({ projectDir })).rejects.toBeInstanceOf(
+        errors.UserError
+      );
+    } finally {
+      await fs.rm(projectDir, { recursive: true, force: true });
+    }
+  });
+});

packages/eas-build-job/src/index.ts

@@ -27,6 +27,7 @@ export * from './context';
 export * from './generic';
 export * from './step';
 export * from './submission-config';
+export * from './projectPackage';
 
 const version = require('../package.json').version;
 export { version };

packages/eas-build-job/src/logs.ts

@@ -36,6 +36,7 @@ export enum BuildPhase {
   // ANDROID
   FIX_GRADLEW = 'FIX_GRADLEW',
   RUN_GRADLEW = 'RUN_GRADLEW',
+  GRADLE_BUILD_PROFILE = 'GRADLE_BUILD_PROFILE',
 
   // IOS
   INSTALL_PODS = 'INSTALL_PODS',
@@ -104,6 +105,7 @@ export const buildPhaseDisplayName: Record<BuildPhase, string> = {
   // ANDROID
   [BuildPhase.FIX_GRADLEW]: 'Fix gradlew',
   [BuildPhase.RUN_GRADLEW]: 'Run gradlew',
+  [BuildPhase.GRADLE_BUILD_PROFILE]: 'Gradle build profile',
 
   // IOS
   [BuildPhase.INSTALL_PODS]: 'Install pods',
@@ -169,6 +171,7 @@ export const buildPhaseWebsiteId: Record<BuildPhase, string> = {
   // ANDROID
   [BuildPhase.FIX_GRADLEW]: 'fix-gradlew',
   [BuildPhase.RUN_GRADLEW]: 'run-gradlew',
+  [BuildPhase.GRADLE_BUILD_PROFILE]: 'gradle-build-profile',
 
   // IOS
   [BuildPhase.INSTALL_PODS]: 'install-pods',

packages/eas-build-job/src/metadata.ts

@@ -49,6 +49,11 @@ export type Metadata = {
    */
   sdkVersion?: string;
 
+  /**
+   * Version of the expo package used in the project.
+   */
+  expoPackageVersion?: string;
+
   /**
    * Runtime version (for Expo Updates)
    */
@@ -180,6 +185,7 @@ export const MetadataSchema = Joi.object({
   distribution: Joi.string().valid('store', 'internal', 'simulator'),
   credentialsSource: Joi.string().valid('local', 'remote'),
   sdkVersion: Joi.string(),
+  expoPackageVersion: Joi.string(),
   runtimeVersion: Joi.string(),
   fingerprintHash: Joi.string(),
   reactNativeVersion: Joi.string(),

packages/eas-build-job/src/projectPackage.ts

@@ -0,0 +1,54 @@
+import spawn from '@expo/turtle-spawn';
+import { asyncResult } from '@expo/results';
+import fs from 'fs/promises';
+import semver from 'semver';
+
+import { type Env } from './common';
+import * as errors from './errors';
+
+export async function getInstalledExpoPackageVersionAsync({
+  env = process.env,
+  projectDir,
+}: {
+  env?: Env | NodeJS.ProcessEnv;
+  projectDir: string;
+}): Promise<string> {
+  const expoPackageJsonPathResult = await asyncResult(
+    spawn('node', ['--print', "require.resolve('expo/package.json')"], {
+      cwd: projectDir,
+      env,
+      stdio: 'pipe',
+    })
+  );
+  if (!expoPackageJsonPathResult.ok) {
+    throw new errors.UserError(
+      'EAS_BUILD_EXPO_PACKAGE_VERSION_NOT_FOUND',
+      'Cannot resolve the installed expo package version because require.resolve("expo/package.json") failed.',
+      { cause: expoPackageJsonPathResult.reason }
+    );
+  }
+
+  const expoPackageJsonPath = expoPackageJsonPathResult.value.stdout.toString().trim();
+  const expoPackageJsonResult = await asyncResult(readJsonAsync(expoPackageJsonPath));
+  if (!expoPackageJsonResult.ok) {
+    throw new errors.UserError(
+      'EAS_BUILD_EXPO_PACKAGE_VERSION_READ_FAILED',
+      'Cannot resolve the installed expo package version because expo/package.json could not be read.',
+      { cause: expoPackageJsonResult.reason }
+    );
+  }
+
+  const expoPackageVersion = expoPackageJsonResult.value.version;
+  if (typeof expoPackageVersion !== 'string' || !semver.valid(expoPackageVersion)) {
+    throw new errors.UserError(
+      'EAS_BUILD_EXPO_PACKAGE_VERSION_INVALID',
+      'Cannot resolve the installed expo package version because expo/package.json has an invalid version.'
+    );
+  }
+
+  return expoPackageVersion;
+}
+
+async function readJsonAsync(filePath: string): Promise<any> {
+  return JSON.parse(await fs.readFile(filePath, 'utf8'));
+}

packages/eas-cli/README.md

@@ -180,8 +180,8 @@ USAGE
   $ eas account:login [-s] [-b]
 
 FLAGS
-  -b, --browser  Login with your browser
-  -s, --sso      Login with SSO
+  -b, --[no-]browser  Log in with your browser (default; use --no-browser for CLI-based login)
+  -s, --sso           Log in with SSO
 
 DESCRIPTION
   log in with your Expo account
@@ -190,7 +190,7 @@ ALIASES
   $ eas login
 ```
 
-_See code: [packages/eas-cli/src/commands/account/login.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/account/login.ts)_
+_See code: [packages/eas-cli/src/commands/account/login.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/account/login.ts)_
 
 ## `eas account:logout`
 
@@ -207,7 +207,7 @@ ALIASES
   $ eas logout
 ```
 
-_See code: [packages/eas-cli/src/commands/account/logout.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/account/logout.ts)_
+_See code: [packages/eas-cli/src/commands/account/logout.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/account/logout.ts)_
 
 ## `eas account:usage [ACCOUNT_NAME]`
 
@@ -229,7 +229,7 @@ DESCRIPTION
   view account usage and billing for the current cycle
 ```
 
-_See code: [packages/eas-cli/src/commands/account/usage.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/account/usage.ts)_
+_See code: [packages/eas-cli/src/commands/account/usage.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/account/usage.ts)_
 
 ## `eas account:view`
 
@@ -246,7 +246,7 @@ ALIASES
   $ eas whoami
 ```
 
-_See code: [packages/eas-cli/src/commands/account/view.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/account/view.ts)_
+_See code: [packages/eas-cli/src/commands/account/view.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/account/view.ts)_
 
 ## `eas analytics [STATUS]`
 
@@ -260,7 +260,7 @@ DESCRIPTION
   display or change analytics settings
 ```
 
-_See code: [packages/eas-cli/src/commands/analytics.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/analytics.ts)_
+_See code: [packages/eas-cli/src/commands/analytics.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/analytics.ts)_
 
 ## `eas autocomplete [SHELL]`
 
@@ -312,7 +312,7 @@ DESCRIPTION
   create a branch
 ```
 
-_See code: [packages/eas-cli/src/commands/branch/create.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/branch/create.ts)_
+_See code: [packages/eas-cli/src/commands/branch/create.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/branch/create.ts)_
 
 ## `eas branch:delete [NAME]`
 
@@ -333,7 +333,7 @@ DESCRIPTION
   delete a branch
 ```
 
-_See code: [packages/eas-cli/src/commands/branch/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/branch/delete.ts)_
+_See code: [packages/eas-cli/src/commands/branch/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/branch/delete.ts)_
 
 ## `eas branch:list`
 
@@ -353,7 +353,7 @@ DESCRIPTION
   list all branches
 ```
 
-_See code: [packages/eas-cli/src/commands/branch/list.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/branch/list.ts)_
+_See code: [packages/eas-cli/src/commands/branch/list.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/branch/list.ts)_
 
 ## `eas branch:rename`
 
@@ -373,7 +373,7 @@ DESCRIPTION
   rename a branch
 ```
 
-_See code: [packages/eas-cli/src/commands/branch/rename.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/branch/rename.ts)_
+_See code: [packages/eas-cli/src/commands/branch/rename.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/branch/rename.ts)_
 
 ## `eas branch:view [NAME]`
 
@@ -396,7 +396,7 @@ DESCRIPTION
   view a branch
 ```
 
-_See code: [packages/eas-cli/src/commands/branch/view.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/branch/view.ts)_
+_See code: [packages/eas-cli/src/commands/branch/view.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/branch/view.ts)_
 
 ## `eas build`
 
@@ -434,7 +434,7 @@ DESCRIPTION
   start a build
 ```
 
-_See code: [packages/eas-cli/src/commands/build/index.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/index.ts)_
+_See code: [packages/eas-cli/src/commands/build/index.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/index.ts)_
 
 ## `eas build:cancel [BUILD_ID]`
 
@@ -454,7 +454,7 @@ DESCRIPTION
   cancel a build
 ```
 
-_See code: [packages/eas-cli/src/commands/build/cancel.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/cancel.ts)_
+_See code: [packages/eas-cli/src/commands/build/cancel.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/cancel.ts)_
 
 ## `eas build:configure`
 
@@ -472,7 +472,7 @@ DESCRIPTION
   configure the project to support EAS Build
 ```
 
-_See code: [packages/eas-cli/src/commands/build/configure.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/configure.ts)_
+_See code: [packages/eas-cli/src/commands/build/configure.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/configure.ts)_
 
 ## `eas build:delete [BUILD_ID]`
 
@@ -492,7 +492,7 @@ DESCRIPTION
   delete a build
 ```
 
-_See code: [packages/eas-cli/src/commands/build/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/delete.ts)_
+_See code: [packages/eas-cli/src/commands/build/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/delete.ts)_
 
 ## `eas build:dev`
 
@@ -517,7 +517,7 @@ DESCRIPTION
   run dev client simulator/emulator build with matching fingerprint or create a new one
 ```
 
-_See code: [packages/eas-cli/src/commands/build/dev.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/dev.ts)_
+_See code: [packages/eas-cli/src/commands/build/dev.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/dev.ts)_
 
 ## `eas build:download`
 
@@ -544,7 +544,7 @@ DESCRIPTION
   download a simulator/emulator build by build ID or fingerprint hash
 ```
 
-_See code: [packages/eas-cli/src/commands/build/download.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/download.ts)_
+_See code: [packages/eas-cli/src/commands/build/download.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/download.ts)_
 
 ## `eas build:inspect`
 
@@ -582,7 +582,7 @@ DESCRIPTION
   inspect the state of the project at specific build stages, useful for troubleshooting
 ```
 
-_See code: [packages/eas-cli/src/commands/build/inspect.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/inspect.ts)_
+_See code: [packages/eas-cli/src/commands/build/inspect.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/inspect.ts)_
 
 ## `eas build:list`
 
@@ -622,7 +622,7 @@ DESCRIPTION
   list all builds for your project
 ```
 
-_See code: [packages/eas-cli/src/commands/build/list.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/list.ts)_
+_See code: [packages/eas-cli/src/commands/build/list.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/list.ts)_
 
 ## `eas build:resign`
 
@@ -652,7 +652,7 @@ DESCRIPTION
   re-sign a build archive
 ```
 
-_See code: [packages/eas-cli/src/commands/build/resign.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/resign.ts)_
+_See code: [packages/eas-cli/src/commands/build/resign.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/resign.ts)_
 
 ## `eas build:run`
 
@@ -680,7 +680,7 @@ DESCRIPTION
   run simulator/emulator builds from eas-cli
 ```
 
-_See code: [packages/eas-cli/src/commands/build/run.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/run.ts)_
+_See code: [packages/eas-cli/src/commands/build/run.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/run.ts)_
 
 ## `eas build:submit`
 
@@ -732,7 +732,7 @@ DESCRIPTION
   get the latest version from EAS servers
 ```
 
-_See code: [packages/eas-cli/src/commands/build/version/get.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/version/get.ts)_
+_See code: [packages/eas-cli/src/commands/build/version/get.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/version/get.ts)_
 
 ## `eas build:version:set`
 
@@ -750,7 +750,7 @@ DESCRIPTION
   update version of an app
 ```
 
-_See code: [packages/eas-cli/src/commands/build/version/set.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/version/set.ts)_
+_See code: [packages/eas-cli/src/commands/build/version/set.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/version/set.ts)_
 
 ## `eas build:version:sync`
 
@@ -768,7 +768,7 @@ DESCRIPTION
   update a version in native code with a value stored on EAS servers
 ```
 
-_See code: [packages/eas-cli/src/commands/build/version/sync.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/version/sync.ts)_
+_See code: [packages/eas-cli/src/commands/build/version/sync.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/version/sync.ts)_
 
 ## `eas build:view [BUILD_ID]`
 
@@ -785,7 +785,7 @@ DESCRIPTION
   view a build for your project
 ```
 
-_See code: [packages/eas-cli/src/commands/build/view.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/build/view.ts)_
+_See code: [packages/eas-cli/src/commands/build/view.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/build/view.ts)_
 
 ## `eas channel:create [NAME]`
 
@@ -806,7 +806,7 @@ DESCRIPTION
   create a channel
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/create.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/create.ts)_
+_See code: [packages/eas-cli/src/commands/channel/create.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/create.ts)_
 
 ## `eas channel:delete [NAME]`
 
@@ -827,7 +827,7 @@ DESCRIPTION
   Delete a channel
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/delete.ts)_
+_See code: [packages/eas-cli/src/commands/channel/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/delete.ts)_
 
 ## `eas channel:edit [NAME]`
 
@@ -849,7 +849,7 @@ DESCRIPTION
   point a channel at a new branch
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/edit.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/edit.ts)_
+_See code: [packages/eas-cli/src/commands/channel/edit.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/edit.ts)_
 
 ## `eas channel:insights`
 
@@ -873,7 +873,7 @@ DESCRIPTION
   display adoption, crash, and unique-user insights for a channel + runtime version
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/insights.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/insights.ts)_
+_See code: [packages/eas-cli/src/commands/channel/insights.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/insights.ts)_
 
 ## `eas channel:list`
 
@@ -893,7 +893,7 @@ DESCRIPTION
   list all channels
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/list.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/list.ts)_
+_See code: [packages/eas-cli/src/commands/channel/list.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/list.ts)_
 
 ## `eas channel:pause [NAME]`
 
@@ -915,7 +915,7 @@ DESCRIPTION
   pause a channel to stop it from sending updates
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/pause.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/pause.ts)_
+_See code: [packages/eas-cli/src/commands/channel/pause.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/pause.ts)_
 
 ## `eas channel:resume [NAME]`
 
@@ -937,7 +937,7 @@ DESCRIPTION
   resume a channel to start sending updates
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/resume.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/resume.ts)_
+_See code: [packages/eas-cli/src/commands/channel/resume.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/resume.ts)_
 
 ## `eas channel:rollout [CHANNEL]`
 
@@ -972,7 +972,7 @@ DESCRIPTION
   Roll a new branch out on a channel incrementally.
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/rollout.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/rollout.ts)_
+_See code: [packages/eas-cli/src/commands/channel/rollout.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/rollout.ts)_
 
 ## `eas channel:view [NAME]`
 
@@ -995,7 +995,7 @@ DESCRIPTION
   view a channel
 ```
 
-_See code: [packages/eas-cli/src/commands/channel/view.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/channel/view.ts)_
+_See code: [packages/eas-cli/src/commands/channel/view.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/channel/view.ts)_
 
 ## `eas config`
 
@@ -1016,7 +1016,7 @@ DESCRIPTION
   display project configuration (app.json + eas.json)
 ```
 
-_See code: [packages/eas-cli/src/commands/config.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/config.ts)_
+_See code: [packages/eas-cli/src/commands/config.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/config.ts)_
 
 ## `eas credentials`
 
@@ -1033,7 +1033,7 @@ DESCRIPTION
   manage credentials
 ```
 
-_See code: [packages/eas-cli/src/commands/credentials/index.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/credentials/index.ts)_
+_See code: [packages/eas-cli/src/commands/credentials/index.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/credentials/index.ts)_
 
 ## `eas credentials:configure-build`
 
@@ -1051,7 +1051,7 @@ DESCRIPTION
   Set up credentials for building your project.
 ```
 
-_See code: [packages/eas-cli/src/commands/credentials/configure-build.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/credentials/configure-build.ts)_
+_See code: [packages/eas-cli/src/commands/credentials/configure-build.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/credentials/configure-build.ts)_
 
 ## `eas deploy [options]`
 
@@ -1080,7 +1080,7 @@ ALIASES
   $ eas worker:deploy
 ```
 
-_See code: [packages/eas-cli/src/commands/deploy/index.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/deploy/index.ts)_
+_See code: [packages/eas-cli/src/commands/deploy/index.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/deploy/index.ts)_
 
 ## `eas deploy:alias`
 
@@ -1105,7 +1105,7 @@ ALIASES
   $ eas deploy:promote
 ```
 
-_See code: [packages/eas-cli/src/commands/deploy/alias/index.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/deploy/alias/index.ts)_
+_See code: [packages/eas-cli/src/commands/deploy/alias/index.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/deploy/alias/index.ts)_
 
 ## `eas deploy:alias:delete [ALIAS_NAME]`
 
@@ -1126,7 +1126,7 @@ ALIASES
   $ eas worker:alias:delete
 ```
 
-_See code: [packages/eas-cli/src/commands/deploy/alias/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/deploy/alias/delete.ts)_
+_See code: [packages/eas-cli/src/commands/deploy/alias/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/deploy/alias/delete.ts)_
 
 ## `eas deploy:delete [DEPLOYMENT_ID]`
 
@@ -1147,7 +1147,7 @@ ALIASES
   $ eas worker:delete
 ```
 
-_See code: [packages/eas-cli/src/commands/deploy/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/deploy/delete.ts)_
+_See code: [packages/eas-cli/src/commands/deploy/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/deploy/delete.ts)_
 
 ## `eas deploy:promote`
 
@@ -1184,7 +1184,7 @@ DESCRIPTION
   register new Apple Devices to use for internal distribution
 ```
 
-_See code: [packages/eas-cli/src/commands/device/create.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/device/create.ts)_
+_See code: [packages/eas-cli/src/commands/device/create.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/device/create.ts)_
 
 ## `eas device:delete`
 
@@ -1204,7 +1204,7 @@ DESCRIPTION
   remove a registered device from your account
 ```
 
-_See code: [packages/eas-cli/src/commands/device/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/device/delete.ts)_
+_See code: [packages/eas-cli/src/commands/device/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/device/delete.ts)_
 
 ## `eas device:list`
 
@@ -1225,7 +1225,7 @@ DESCRIPTION
   list all registered devices for your account
 ```
 
-_See code: [packages/eas-cli/src/commands/device/list.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/device/list.ts)_
+_See code: [packages/eas-cli/src/commands/device/list.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/device/list.ts)_
 
 ## `eas device:rename`
 
@@ -1246,7 +1246,7 @@ DESCRIPTION
   rename a registered device
 ```
 
-_See code: [packages/eas-cli/src/commands/device/rename.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/device/rename.ts)_
+_See code: [packages/eas-cli/src/commands/device/rename.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/device/rename.ts)_
 
 ## `eas device:view [UDID]`
 
@@ -1260,7 +1260,7 @@ DESCRIPTION
   view a device for your project
 ```
 
-_See code: [packages/eas-cli/src/commands/device/view.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/device/view.ts)_
+_See code: [packages/eas-cli/src/commands/device/view.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/device/view.ts)_
 
 ## `eas diagnostics`
 
@@ -1274,7 +1274,7 @@ DESCRIPTION
   display environment info
 ```
 
-_See code: [packages/eas-cli/src/commands/diagnostics.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/diagnostics.ts)_
+_See code: [packages/eas-cli/src/commands/diagnostics.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/diagnostics.ts)_
 
 ## `eas env:create [ENVIRONMENT]`
 
@@ -1306,7 +1306,7 @@ DESCRIPTION
   create an environment variable for the current project or account
 ```
 
-_See code: [packages/eas-cli/src/commands/env/create.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/env/create.ts)_
+_See code: [packages/eas-cli/src/commands/env/create.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/env/create.ts)_
 
 ## `eas env:delete [ENVIRONMENT]`
 
@@ -1332,7 +1332,7 @@ DESCRIPTION
   delete an environment variable for the current project or account
 ```
 
-_See code: [packages/eas-cli/src/commands/env/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/env/delete.ts)_
+_See code: [packages/eas-cli/src/commands/env/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/env/delete.ts)_
 
 ## `eas env:exec ENVIRONMENT BASH_COMMAND`
 
@@ -1354,7 +1354,7 @@ DESCRIPTION
   execute a command with environment variables from the selected environment
 ```
 
-_See code: [packages/eas-cli/src/commands/env/exec.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/env/exec.ts)_
+_See code: [packages/eas-cli/src/commands/env/exec.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/env/exec.ts)_
 
 ## `eas env:get [ENVIRONMENT]`
 
@@ -1382,7 +1382,7 @@ DESCRIPTION
   view an environment variable for the current project or account
 ```
 
-_See code: [packages/eas-cli/src/commands/env/get.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/env/get.ts)_
+_See code: [packages/eas-cli/src/commands/env/get.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/env/get.ts)_
 
 ## `eas env:list [ENVIRONMENT]`
 
@@ -1410,7 +1410,7 @@ DESCRIPTION
   list environment variables for the current project or account
 ```
 
-_See code: [packages/eas-cli/src/commands/env/list.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/env/list.ts)_
+_See code: [packages/eas-cli/src/commands/env/list.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/env/list.ts)_
 
 ## `eas env:pull [ENVIRONMENT]`
 
@@ -1433,7 +1433,7 @@ DESCRIPTION
   pull environment variables for the selected environment to .env file
 ```
 
-_See code: [packages/eas-cli/src/commands/env/pull.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/env/pull.ts)_
+_See code: [packages/eas-cli/src/commands/env/pull.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/env/pull.ts)_
 
 ## `eas env:push [ENVIRONMENT]`
 
@@ -1455,7 +1455,7 @@ DESCRIPTION
   push environment variables from .env file to the selected environment
 ```
 
-_See code: [packages/eas-cli/src/commands/env/push.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/env/push.ts)_
+_See code: [packages/eas-cli/src/commands/env/push.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/env/push.ts)_
 
 ## `eas env:update [ENVIRONMENT]`
 
@@ -1489,7 +1489,7 @@ DESCRIPTION
   update an environment variable on the current project or account
 ```
 
-_See code: [packages/eas-cli/src/commands/env/update.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/env/update.ts)_
+_See code: [packages/eas-cli/src/commands/env/update.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/env/update.ts)_
 
 ## `eas fingerprint:compare [HASH1] [HASH2]`
 
@@ -1533,7 +1533,7 @@ EXAMPLES
   $ eas fingerprint:compare <FINGERPRINT-HASH> --update-id <UPDATE-ID> 	 # Compare fingerprint from update against provided fingerprint
 ```
 
-_See code: [packages/eas-cli/src/commands/fingerprint/compare.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/fingerprint/compare.ts)_
+_See code: [packages/eas-cli/src/commands/fingerprint/compare.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/fingerprint/compare.ts)_
 
 ## `eas fingerprint:generate`
 
@@ -1564,7 +1564,7 @@ EXAMPLES
   $ eas fingerprint:generate --json --non-interactive --platform android  	 # Output fingerprint json to stdout
 ```
 
-_See code: [packages/eas-cli/src/commands/fingerprint/generate.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/fingerprint/generate.ts)_
+_See code: [packages/eas-cli/src/commands/fingerprint/generate.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/fingerprint/generate.ts)_
 
 ## `eas help [COMMAND]`
 
@@ -1643,7 +1643,7 @@ DESCRIPTION
   connect a project to an App Store Connect app
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/asc/connect.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/asc/connect.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/asc/connect.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/asc/connect.ts)_
 
 ## `eas integrations:asc:disconnect`
 
@@ -1662,7 +1662,7 @@ DESCRIPTION
   disconnect the current project from its App Store Connect app
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/asc/disconnect.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/asc/disconnect.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/asc/disconnect.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/asc/disconnect.ts)_
 
 ## `eas integrations:asc:status`
 
@@ -1680,7 +1680,7 @@ DESCRIPTION
   show the App Store Connect app link status for the current project
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/asc/status.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/asc/status.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/asc/status.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/asc/status.ts)_
 
 ## `eas integrations:convex:connect`
 
@@ -1702,7 +1702,7 @@ DESCRIPTION
   connect Convex to your Expo project
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/convex/connect.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/convex/connect.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/convex/connect.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/convex/connect.ts)_
 
 ## `eas integrations:convex:dashboard`
 
@@ -1716,7 +1716,7 @@ DESCRIPTION
   open the Convex dashboard for the linked Convex project
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/convex/dashboard.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/convex/dashboard.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/convex/dashboard.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/convex/dashboard.ts)_
 
 ## `eas integrations:convex:project`
 
@@ -1730,7 +1730,7 @@ DESCRIPTION
   display the Convex project linked to the current Expo app
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/convex/project.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/convex/project.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/convex/project.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/convex/project.ts)_
 
 ## `eas integrations:convex:project:delete`
 
@@ -1748,7 +1748,7 @@ DESCRIPTION
   remove the Convex project link for the current Expo app from EAS servers
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/convex/project/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/convex/project/delete.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/convex/project/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/convex/project/delete.ts)_
 
 ## `eas integrations:convex:team`
 
@@ -1762,7 +1762,7 @@ DESCRIPTION
   display Convex teams linked to the current Expo app's owner account
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/convex/team.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/convex/team.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/convex/team.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/convex/team.ts)_
 
 ## `eas integrations:convex:team:delete [CONVEX_TEAM]`
 
@@ -1783,7 +1783,7 @@ DESCRIPTION
   remove a Convex team link from the current Expo app owner account's EAS servers
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/convex/team/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/convex/team/delete.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/convex/team/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/convex/team/delete.ts)_
 
 ## `eas integrations:convex:team:invite [CONVEX_TEAM]`
 
@@ -1803,7 +1803,7 @@ DESCRIPTION
   send a Convex team invitation to your verified email address
 ```
 
-_See code: [packages/eas-cli/src/commands/integrations/convex/team/invite.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/integrations/convex/team/invite.ts)_
+_See code: [packages/eas-cli/src/commands/integrations/convex/team/invite.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/integrations/convex/team/invite.ts)_
 
 ## `eas login`
 
@@ -1814,8 +1814,8 @@ USAGE
   $ eas login [-s] [-b]
 
 FLAGS
-  -b, --browser  Login with your browser
-  -s, --sso      Login with SSO
+  -b, --[no-]browser  Log in with your browser (default; use --no-browser for CLI-based login)
+  -s, --sso           Log in with SSO
 
 DESCRIPTION
   log in with your Expo account
@@ -1855,7 +1855,7 @@ DESCRIPTION
   validate the local store configuration
 ```
 
-_See code: [packages/eas-cli/src/commands/metadata/lint.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/metadata/lint.ts)_
+_See code: [packages/eas-cli/src/commands/metadata/lint.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/metadata/lint.ts)_
 
 ## `eas metadata:pull`
 
@@ -1873,7 +1873,7 @@ DESCRIPTION
   generate the local store configuration from the app stores
 ```
 
-_See code: [packages/eas-cli/src/commands/metadata/pull.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/metadata/pull.ts)_
+_See code: [packages/eas-cli/src/commands/metadata/pull.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/metadata/pull.ts)_
 
 ## `eas metadata:push`
 
@@ -1891,7 +1891,7 @@ DESCRIPTION
   sync the local store configuration to the app stores
 ```
 
-_See code: [packages/eas-cli/src/commands/metadata/push.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/metadata/push.ts)_
+_See code: [packages/eas-cli/src/commands/metadata/push.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/metadata/push.ts)_
 
 ## `eas new [PATH]`
 
@@ -1943,7 +1943,7 @@ DESCRIPTION
   open the project page in a web browser
 ```
 
-_See code: [packages/eas-cli/src/commands/open.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/open.ts)_
+_See code: [packages/eas-cli/src/commands/open.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/open.ts)_
 
 ## `eas project:info`
 
@@ -1957,7 +1957,7 @@ DESCRIPTION
   information about the current project
 ```
 
-_See code: [packages/eas-cli/src/commands/project/info.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/project/info.ts)_
+_See code: [packages/eas-cli/src/commands/project/info.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/project/info.ts)_
 
 ## `eas project:init`
 
@@ -1980,7 +1980,7 @@ ALIASES
   $ eas init
 ```
 
-_See code: [packages/eas-cli/src/commands/project/init.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/project/init.ts)_
+_See code: [packages/eas-cli/src/commands/project/init.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/project/init.ts)_
 
 ## `eas project:new [PATH]`
 
@@ -2004,7 +2004,7 @@ ALIASES
   $ eas new
 ```
 
-_See code: [packages/eas-cli/src/commands/project/new.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/project/new.ts)_
+_See code: [packages/eas-cli/src/commands/project/new.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/project/new.ts)_
 
 ## `eas project:onboarding [TARGET_PROJECT_DIRECTORY]`
 
@@ -2022,7 +2022,7 @@ ALIASES
   $ eas onboarding
 ```
 
-_See code: [packages/eas-cli/src/commands/project/onboarding.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/project/onboarding.ts)_
+_See code: [packages/eas-cli/src/commands/project/onboarding.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/project/onboarding.ts)_
 
 ## `eas submit`
 
@@ -2055,7 +2055,7 @@ ALIASES
   $ eas build:submit
 ```
 
-_See code: [packages/eas-cli/src/commands/submit.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/submit.ts)_
+_See code: [packages/eas-cli/src/commands/submit.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/submit.ts)_
 
 ## `eas update`
 
@@ -2098,7 +2098,7 @@ DESCRIPTION
   publish an update group
 ```
 
-_See code: [packages/eas-cli/src/commands/update/index.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/index.ts)_
+_See code: [packages/eas-cli/src/commands/update/index.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/index.ts)_
 
 ## `eas update:configure`
 
@@ -2119,7 +2119,7 @@ DESCRIPTION
   configure the project to support EAS Update
 ```
 
-_See code: [packages/eas-cli/src/commands/update/configure.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/configure.ts)_
+_See code: [packages/eas-cli/src/commands/update/configure.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/configure.ts)_
 
 ## `eas update:delete GROUPID`
 
@@ -2140,7 +2140,7 @@ DESCRIPTION
   delete all the updates in an update group
 ```
 
-_See code: [packages/eas-cli/src/commands/update/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/delete.ts)_
+_See code: [packages/eas-cli/src/commands/update/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/delete.ts)_
 
 ## `eas update:edit [GROUPID]`
 
@@ -2165,7 +2165,7 @@ DESCRIPTION
   edit all the updates in an update group
 ```
 
-_See code: [packages/eas-cli/src/commands/update/edit.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/edit.ts)_
+_See code: [packages/eas-cli/src/commands/update/edit.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/edit.ts)_
 
 ## `eas update:insights GROUPID`
 
@@ -2192,7 +2192,7 @@ DESCRIPTION
   display launch, crash, unique-user, and size insights for an update group
 ```
 
-_See code: [packages/eas-cli/src/commands/update/insights.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/insights.ts)_
+_See code: [packages/eas-cli/src/commands/update/insights.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/insights.ts)_
 
 ## `eas update:list`
 
@@ -2219,7 +2219,7 @@ DESCRIPTION
   view the recent updates
 ```
 
-_See code: [packages/eas-cli/src/commands/update/list.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/list.ts)_
+_See code: [packages/eas-cli/src/commands/update/list.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/list.ts)_
 
 ## `eas update:republish`
 
@@ -2257,7 +2257,7 @@ DESCRIPTION
   roll back to an existing update
 ```
 
-_See code: [packages/eas-cli/src/commands/update/republish.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/republish.ts)_
+_See code: [packages/eas-cli/src/commands/update/republish.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/republish.ts)_
 
 ## `eas update:revert-update-rollout`
 
@@ -2285,7 +2285,7 @@ DESCRIPTION
   revert a rollout update for a project
 ```
 
-_See code: [packages/eas-cli/src/commands/update/revert-update-rollout.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/revert-update-rollout.ts)_
+_See code: [packages/eas-cli/src/commands/update/revert-update-rollout.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/revert-update-rollout.ts)_
 
 ## `eas update:roll-back-to-embedded`
 
@@ -2315,7 +2315,7 @@ DESCRIPTION
   roll back to the embedded update
 ```
 
-_See code: [packages/eas-cli/src/commands/update/roll-back-to-embedded.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/roll-back-to-embedded.ts)_
+_See code: [packages/eas-cli/src/commands/update/roll-back-to-embedded.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/roll-back-to-embedded.ts)_
 
 ## `eas update:rollback`
 
@@ -2336,7 +2336,7 @@ DESCRIPTION
   instead execute "eas update:republish" or "eas update:roll-back-to-embedded".
 ```
 
-_See code: [packages/eas-cli/src/commands/update/rollback.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/rollback.ts)_
+_See code: [packages/eas-cli/src/commands/update/rollback.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/rollback.ts)_
 
 ## `eas update:view GROUPID`
 
@@ -2360,7 +2360,7 @@ DESCRIPTION
   update group details
 ```
 
-_See code: [packages/eas-cli/src/commands/update/view.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/update/view.ts)_
+_See code: [packages/eas-cli/src/commands/update/view.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/update/view.ts)_
 
 ## `eas upload`
 
@@ -2381,7 +2381,7 @@ DESCRIPTION
   upload a local build and generate a sharable link
 ```
 
-_See code: [packages/eas-cli/src/commands/upload.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/upload.ts)_
+_See code: [packages/eas-cli/src/commands/upload.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/upload.ts)_
 
 ## `eas webhook:create`
 
@@ -2403,7 +2403,7 @@ DESCRIPTION
   create a webhook
 ```
 
-_See code: [packages/eas-cli/src/commands/webhook/create.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/webhook/create.ts)_
+_See code: [packages/eas-cli/src/commands/webhook/create.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/webhook/create.ts)_
 
 ## `eas webhook:delete [ID]`
 
@@ -2423,7 +2423,7 @@ DESCRIPTION
   delete a webhook
 ```
 
-_See code: [packages/eas-cli/src/commands/webhook/delete.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/webhook/delete.ts)_
+_See code: [packages/eas-cli/src/commands/webhook/delete.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/webhook/delete.ts)_
 
 ## `eas webhook:list`
 
@@ -2442,7 +2442,7 @@ DESCRIPTION
   list webhooks
 ```
 
-_See code: [packages/eas-cli/src/commands/webhook/list.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/webhook/list.ts)_
+_See code: [packages/eas-cli/src/commands/webhook/list.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/webhook/list.ts)_
 
 ## `eas webhook:update`
 
@@ -2465,7 +2465,7 @@ DESCRIPTION
   update a webhook
 ```
 
-_See code: [packages/eas-cli/src/commands/webhook/update.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/webhook/update.ts)_
+_See code: [packages/eas-cli/src/commands/webhook/update.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/webhook/update.ts)_
 
 ## `eas webhook:view ID`
 
@@ -2482,7 +2482,7 @@ DESCRIPTION
   view a webhook
 ```
 
-_See code: [packages/eas-cli/src/commands/webhook/view.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/webhook/view.ts)_
+_See code: [packages/eas-cli/src/commands/webhook/view.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/webhook/view.ts)_
 
 ## `eas whoami`
 
@@ -2603,7 +2603,7 @@ DESCRIPTION
   to cancel.
 ```
 
-_See code: [packages/eas-cli/src/commands/workflow/cancel.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/workflow/cancel.ts)_
+_See code: [packages/eas-cli/src/commands/workflow/cancel.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/workflow/cancel.ts)_
 
 ## `eas workflow:create [NAME]`
 
@@ -2623,7 +2623,7 @@ DESCRIPTION
   create a new workflow configuration YAML file
 ```
 
-_See code: [packages/eas-cli/src/commands/workflow/create.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/workflow/create.ts)_
+_See code: [packages/eas-cli/src/commands/workflow/create.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/workflow/create.ts)_
 
 ## `eas workflow:logs [ID]`
 
@@ -2647,7 +2647,7 @@ DESCRIPTION
   If no ID is passed in, you will be prompted to select from recent workflow runs for the current project.
 ```
 
-_See code: [packages/eas-cli/src/commands/workflow/logs.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/workflow/logs.ts)_
+_See code: [packages/eas-cli/src/commands/workflow/logs.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/workflow/logs.ts)_
 
 ## `eas workflow:run FILE`
 
@@ -2687,7 +2687,7 @@ FLAG DESCRIPTIONS
     Exit codes: 0 = success, 11 = failure, 12 = canceled, 13 = wait aborted.
 ```
 
-_See code: [packages/eas-cli/src/commands/workflow/run.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/workflow/run.ts)_
+_See code: [packages/eas-cli/src/commands/workflow/run.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/workflow/run.ts)_
 
 ## `eas workflow:runs`
 
@@ -2709,7 +2709,7 @@ DESCRIPTION
   list recent workflow runs for this project, with their IDs, statuses, and timestamps
 ```
 
-_See code: [packages/eas-cli/src/commands/workflow/runs.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/workflow/runs.ts)_
+_See code: [packages/eas-cli/src/commands/workflow/runs.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/workflow/runs.ts)_
 
 ## `eas workflow:status [WORKFLOW_RUN_ID]`
 
@@ -2737,7 +2737,7 @@ FLAG DESCRIPTIONS
     Exit codes: 0 = success, 11 = failure, 12 = canceled, 13 = wait aborted.
 ```
 
-_See code: [packages/eas-cli/src/commands/workflow/status.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/workflow/status.ts)_
+_See code: [packages/eas-cli/src/commands/workflow/status.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/workflow/status.ts)_
 
 ## `eas workflow:validate PATH`
 
@@ -2757,7 +2757,7 @@ DESCRIPTION
   validate a workflow configuration yaml file
 ```
 
-_See code: [packages/eas-cli/src/commands/workflow/validate.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/workflow/validate.ts)_
+_See code: [packages/eas-cli/src/commands/workflow/validate.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/workflow/validate.ts)_
 
 ## `eas workflow:view [ID]`
 
@@ -2779,5 +2779,5 @@ DESCRIPTION
   workflow runs for the current project.
 ```
 
-_See code: [packages/eas-cli/src/commands/workflow/view.ts](https://github.com/expo/eas-cli/blob/v18.13.0/packages/eas-cli/src/commands/workflow/view.ts)_
+_See code: [packages/eas-cli/src/commands/workflow/view.ts](https://github.com/expo/eas-cli/blob/v19.0.1/packages/eas-cli/src/commands/workflow/view.ts)_
 <!-- commandsstop -->

packages/eas-cli/package.json

@@ -1,6 +1,6 @@
 {
   "name": "eas-cli",
-  "version": "18.13.0",
+  "version": "19.0.1",
   "description": "EAS command line tool",
   "keywords": [
     "cli",
@@ -47,11 +47,11 @@
     "@expo/code-signing-certificates": "0.0.5",
     "@expo/config": "55.0.10",
     "@expo/config-plugins": "55.0.7",
-    "@expo/eas-build-job": "18.12.0",
-    "@expo/eas-json": "18.12.0",
+    "@expo/eas-build-job": "19.0.0",
+    "@expo/eas-json": "19.0.0",
     "@expo/env": "^1.0.0",
     "@expo/json-file": "8.3.3",
-    "@expo/logger": "18.5.0",
+    "@expo/logger": "19.0.0",
     "@expo/multipart-body-parser": "2.0.0",
     "@expo/osascript": "2.1.4",
     "@expo/package-manager": "1.9.10",
@@ -63,7 +63,7 @@
     "@expo/results": "1.0.0",
     "@expo/rudder-sdk-node": "1.1.1",
     "@expo/spawn-async": "1.7.2",
-    "@expo/steps": "18.12.0",
+    "@expo/steps": "19.0.0",
     "@expo/timeago.js": "1.0.0",
     "@oclif/core": "^4.8.3",
     "@oclif/plugin-autocomplete": "^3.2.40",
@@ -78,6 +78,7 @@
     "chalk": "4.1.2",
     "cli-progress": "3.12.0",
     "dateformat": "4.6.3",
+    "debug": "4.4.3",
     "diff": "7.0.0",
     "dotenv": "16.3.1",
     "env-paths": "2.2.0",
@@ -138,6 +139,7 @@
     "@tsconfig/node20": "20.1.8",
     "@types/cli-progress": "3.11.5",
     "@types/dateformat": "3.0.1",
+    "@types/debug": "4.1.13",
     "@types/diff": "6.0.0",
     "@types/envinfo": "7.8.3",
     "@types/express": "4.17.15",
@@ -219,6 +221,9 @@
       "secret": {
         "description": "manage project and account secrets"
       },
+      "simulator": {
+        "description": "manage remote simulator sessions"
+      },
       "update": {
         "description": "manage individual updates"
       },

packages/eas-cli/src/build/metadata.ts

@@ -1,5 +1,11 @@
-import { Metadata, Platform, sanitizeMetadata } from '@expo/eas-build-job';
+import {
+  Metadata,
+  Platform,
+  getInstalledExpoPackageVersionAsync,
+  sanitizeMetadata,
+} from '@expo/eas-build-job';
 import { IosEnterpriseProvisioning } from '@expo/eas-json';
+import { asyncResult } from '@expo/results';
 import fs from 'fs-extra';
 import resolveFrom from 'resolve-from';
 
@@ -9,9 +15,7 @@ import { maybeResolveVersionsAsync as maybeResolveIosVersionsAsync } from './ios
 import { LocalBuildMode } from './local';
 import { BuildDistributionType } from './types';
 import Log from '../log';
-import {
-  isExpoUpdatesInstalled,
-} from '../project/projectUtils';
+import { isExpoUpdatesInstalled } from '../project/projectUtils';
 import { readChannelSafelyAsync as readAndroidChannelSafelyAsync } from '../update/android/UpdatesModule';
 import { readChannelSafelyAsync as readIosChannelSafelyAsync } from '../update/ios/UpdatesModule';
 import { easCliVersion } from '../utils/easCli';
@@ -26,6 +30,16 @@ export async function collectMetadataAsync<T extends Platform>(
 ): Promise<Metadata> {
   const channelObject = await resolveChannelAsync(ctx);
   const distribution = ctx.buildProfile.distribution ?? BuildDistributionType.STORE;
+  const expoPackageVersionResult = await asyncResult(
+    getInstalledExpoPackageVersionAsync({
+      env: process.env,
+      projectDir: ctx.projectDir,
+    })
+  );
+  if (!expoPackageVersionResult.ok) {
+    Log.debug('Failed to resolve expo package version:');
+    Log.debug(expoPackageVersionResult.reason);
+  }
   const metadata: Metadata = {
     trackingContext: ctx.analyticsEventProperties,
     ...(await maybeResolveVersionsAsync(ctx)),
@@ -36,6 +50,7 @@ export async function collectMetadataAsync<T extends Platform>(
     runtimeVersion: runtimeAndFingerprintMetadata?.runtimeVersion,
     fingerprintHash: runtimeAndFingerprintMetadata?.fingerprintHash,
     reactNativeVersion: await getReactNativeVersionAsync(ctx.projectDir),
+    expoPackageVersion: expoPackageVersionResult.value,
     ...channelObject,
     distribution,
     appName: ctx.exp.name,

packages/eas-cli/src/commandUtils/context/contextUtils/__tests__/getProjectIdAsync-test.ts

@@ -74,7 +74,10 @@ describe(getProjectIdAsync, () => {
     );
 
     jest.mocked(findProjectRootAsync).mockResolvedValue('/app');
-    jest.mocked(isExpoInstalled).mockReturnValue(true);
+
+    // NOTE(@kitten): Updating this test is easiest by letting it fallback to `@expo/config`
+    // This isn't a great solution, but the test is pretty involved
+    jest.mocked(isExpoInstalled).mockReturnValue(false);
   });
 
   it('gets the project ID from app config if exists', async () => {

packages/eas-cli/src/commandUtils/new/__tests__/commands.test.ts

@@ -1,12 +1,14 @@
 import { canAccessRepositoryUsingSshAsync, runGitCloneAsync } from '../../../onboarding/git';
 import { installDependenciesAsync } from '../../../onboarding/installDependencies';
 import { runCommandAsync } from '../../../onboarding/runCommand';
+import { expoCommandAsync } from '../../../utils/expoCli';
 import {
   cloneTemplateAsync,
   initializeGitRepositoryAsync,
   installProjectDependenciesAsync,
 } from '../commands';
 
+jest.mock('../../../utils/expoCli');
 jest.mock('../../../onboarding/git');
 jest.mock('../../../onboarding/runCommand');
 jest.mock('../../../onboarding/installDependencies');
@@ -79,21 +81,11 @@ describe('commands', () => {
         packageManager: 'npm',
       });
 
-      expect(runCommandAsync).toHaveBeenCalledWith({
-        cwd: projectDir,
-        command: 'npx',
-        args: ['expo', 'install', 'expo-updates'],
-        showOutput: false,
-        showSpinner: false,
-      });
-
-      expect(runCommandAsync).toHaveBeenCalledWith({
-        cwd: projectDir,
-        command: 'npx',
-        args: ['expo', 'install', '@expo/metro-runtime'],
-        showOutput: false,
-        showSpinner: false,
-      });
+      expect(expoCommandAsync).toHaveBeenCalledWith(
+        projectDir,
+        ['install', 'expo-updates', '@expo/metro-runtime'],
+        { silent: true }
+      );
     });
   });
 

packages/eas-cli/src/commandUtils/new/commands.ts

@@ -7,6 +7,7 @@ import { canAccessRepositoryUsingSshAsync, runGitCloneAsync } from '../../onboar
 import { PackageManager, installDependenciesAsync } from '../../onboarding/installDependencies';
 import { runCommandAsync } from '../../onboarding/runCommand';
 import { ora } from '../../ora';
+import { expoCommandAsync } from '../../utils/expoCli';
 
 export async function cloneTemplateAsync(targetProjectDir: string): Promise<string> {
   const githubUsername = 'expo';
@@ -48,16 +49,8 @@ export async function installProjectDependenciesAsync(
   });
 
   const dependencies = ['expo-updates', '@expo/metro-runtime'];
-  for (const dependency of dependencies) {
-    spinner.text = `Installing ${chalk.bold(dependency)}`;
-    await runCommandAsync({
-      cwd: projectDir,
-      command: 'npx',
-      args: ['expo', 'install', dependency],
-      showOutput: false,
-      showSpinner: false,
-    });
-  }
+  spinner.text = `Installing ${dependencies.map(dep => chalk.bold(dep)).join(', ')}`;
+  await expoCommandAsync(projectDir, ['install', ...dependencies], { silent: true });
   spinner.succeed(`Installed project dependencies`);
 }
 

packages/eas-cli/src/commands/account/login.ts

@@ -13,14 +13,15 @@ export default class AccountLogin extends EasCommand {
   static override flags = {
     // can pass either --sso or -s
     sso: Flags.boolean({
-      description: 'Login with SSO',
+      description: 'Log in with SSO',
       char: 's',
       default: false,
     }),
     browser: Flags.boolean({
-      description: 'Login with your browser',
+      description: 'Log in with your browser (default; use --no-browser for CLI-based login)',
       char: 'b',
-      default: false,
+      default: true,
+      allowNo: true,
     }),
   };
 

packages/eas-cli/src/commands/observe/__tests__/routes.test.ts

@@ -152,6 +152,37 @@ describe(ObserveRoutes, () => {
     expect(options.buildNumber).toBe('42');
   });
 
+  it('passes --route-name flags through as routeNames array', async () => {
+    const command = createCommand(['--route-name', '/home', '--route-name', '/profile']);
+    await command.runAsync();
+
+    const options = mockFetchObserveNavigationRoutesAsync.mock.calls[0][2];
+    expect(options.routeNames).toEqual(['/home', '/profile']);
+  });
+
+  it('dedupes duplicate --route-name flags', async () => {
+    const command = createCommand([
+      '--route-name',
+      '/home',
+      '--route-name',
+      '/profile',
+      '--route-name',
+      '/home',
+    ]);
+    await command.runAsync();
+
+    const options = mockFetchObserveNavigationRoutesAsync.mock.calls[0][2];
+    expect(options.routeNames).toEqual(['/home', '/profile']);
+  });
+
+  it('does not pass routeNames when --route-name is not provided', async () => {
+    const command = createCommand([]);
+    await command.runAsync();
+
+    const options = mockFetchObserveNavigationRoutesAsync.mock.calls[0][2];
+    expect(options.routeNames).toBeUndefined();
+  });
+
   it('resolves --stat aliases and passes them through', async () => {
     const command = createCommand(['--stat', 'p90', '--stat', 'eventCount']);
     await command.runAsync();

packages/eas-cli/src/commands/observe/routes.ts

@@ -62,6 +62,11 @@ export default class ObserveRoutes extends EasCommand {
     'build-number': Flags.string({
       description: 'Filter by app build number',
     }),
+    'route-name': Flags.string({
+      description:
+        'Filter by route name (can be specified multiple times to include several routes)',
+      multiple: true,
+    }),
     ...ObserveProjectIdFlag,
     ...EasNonInteractiveAndJsonFlags,
   };
@@ -100,6 +105,10 @@ export default class ObserveRoutes extends EasCommand {
       ? Array.from(new Set(flags.stat.map(resolveNavigationStatKey)))
       : undefined;
 
+    const routeNames = flags['route-name']?.length
+      ? Array.from(new Set(flags['route-name']))
+      : undefined;
+
     const { daysBack, startTime, endTime } = resolveTimeRange(flags);
     const platforms = appPlatformsFromFlag(flags.platform);
 
@@ -115,6 +124,7 @@ export default class ObserveRoutes extends EasCommand {
         appVersion: flags['app-version'],
         updateId: flags['update-id'],
         buildNumber: flags['build-number'],
+        routeNames,
       }
     );
 

packages/eas-cli/src/commands/project/__tests__/init.test.ts

@@ -95,7 +95,10 @@ function mockTestProject(options: {
     graphqlClient,
     authenticationInfo: { accessToken: null, sessionSecret: '1234' },
   });
-  jest.mocked(isExpoInstalled).mockReturnValue(true);
+
+  // NOTE(@kitten): Updating this test is easiest by letting it fallback to `@expo/config`
+  // This isn't a great solution, but the test is pretty involved
+  jest.mocked(isExpoInstalled).mockReturnValue(false);
 }
 
 const commandOptions = getMockOclifConfig({ root: '/test-project' });

packages/eas-cli/src/commands/project/onboarding.ts

@@ -36,6 +36,7 @@ import { ExpoConfigOptions, getPrivateExpoConfigAsync } from '../../project/expo
 import { promptAsync } from '../../prompts';
 import { Actor } from '../../user/User';
 import { easCliVersion } from '../../utils/easCli';
+import { expoCommandAsync } from '../../utils/expoCli';
 import GitClient from '../../vcs/clients/git';
 
 export default class Onboarding extends EasCommand {
@@ -205,23 +206,12 @@ export default class Onboarding extends EasCommand {
     });
 
     if (!app.githubRepository) {
-      await runCommandAsync({
-        cwd: finalTargetProjectDirectory,
-        command: 'npx',
-        args: ['expo', 'install', 'expo-updates'],
-      });
-      Log.log();
-      await runCommandAsync({
-        cwd: finalTargetProjectDirectory,
-        command: 'npx',
-        args: ['expo', 'install', 'expo-insights'],
-      });
-      Log.log();
-      await runCommandAsync({
-        cwd: finalTargetProjectDirectory,
-        command: 'npx',
-        args: ['expo', 'install', 'expo-dev-client'],
-      });
+      await expoCommandAsync(finalTargetProjectDirectory, [
+        'install',
+        'expo-updates',
+        'expo-insights',
+        'expo-dev-client',
+      ]);
       Log.log();
     }
     await vcsClient.trackFileAsync('package-lock.json');

packages/eas-cli/src/commands/simulator/get.ts

@@ -10,7 +10,6 @@ import { ora } from '../../ora';
 import { formatRemoteSessionInstructions } from '../../simulator/utils';
 
 export default class SimulatorGet extends EasCommand {
-  static override hidden = true;
   static override description =
     '[EXPERIMENTAL] get info about a remote simulator session on EAS by its device run session ID';
 

packages/eas-cli/src/commands/simulator/start.ts

@@ -3,7 +3,10 @@ import { Flags } from '@oclif/core';
 import { getBareJobRunUrl } from '../../build/utils/url';
 import EasCommand from '../../commandUtils/EasCommand';
 import { ExpoGraphqlClient } from '../../commandUtils/context/contextUtils/createGraphqlClient';
-import { EASNonInteractiveFlag } from '../../commandUtils/flags';
+import {
+  EasNonInteractiveAndJsonFlags,
+  resolveNonInteractiveAndJsonFlags,
+} from '../../commandUtils/flags';
 import {
   AppPlatform,
   DeviceRunSessionStatus,
@@ -18,6 +21,7 @@ import {
   DeviceRunSessionRemoteConfig,
   formatRemoteSessionInstructions,
 } from '../../simulator/utils';
+import { enableJsonOutput, printJsonOnlyOutput } from '../../utils/json';
 import { sleepAsync } from '../../utils/promise';
 import nullthrows from 'nullthrows';
 
@@ -28,6 +32,7 @@ const POLL_TIMEOUT_MS = 15 * 60 * 1_000; // 15 minutes
 // so adding a new enum value in codegen fails the build until it is wired up here.
 const DEVICE_RUN_SESSION_TYPE_FLAG_VALUES: Record<DeviceRunSessionType, string> = {
   [DeviceRunSessionType.AgentDevice]: 'agent-device',
+  [DeviceRunSessionType.Argent]: 'argent',
   [DeviceRunSessionType.ServeSim]: 'serve-sim',
 };
 
@@ -38,7 +43,6 @@ const DEVICE_RUN_SESSION_TYPE_BY_FLAG_VALUE = Object.fromEntries(
 ) as Record<string, DeviceRunSessionType>;
 
 export default class SimulatorStart extends EasCommand {
-  static override hidden = true;
   static override description =
     '[EXPERIMENTAL] start a remote simulator session on EAS and get instructions to connect to it';
 
@@ -57,7 +61,7 @@ export default class SimulatorStart extends EasCommand {
       description:
         'Version of the package backing the device run session (e.g. "0.1.3-alpha.3"). Defaults to "latest" when omitted.',
     }),
-    ...EASNonInteractiveFlag,
+    ...EasNonInteractiveAndJsonFlags,
   };
 
   static override contextDefinition = {
@@ -67,12 +71,17 @@ export default class SimulatorStart extends EasCommand {
 
   async runAsync(): Promise<void> {
     const { flags } = await this.parse(SimulatorStart);
+    const { json: jsonFlag, nonInteractive } = resolveNonInteractiveAndJsonFlags(flags);
+
+    if (jsonFlag) {
+      enableJsonOutput();
+    }
 
     const {
       projectId,
       loggedIn: { graphqlClient },
     } = await this.getContextAsync(SimulatorStart, {
-      nonInteractive: flags['non-interactive'],
+      nonInteractive,
     });
 
     const platform = flags.platform === 'android' ? AppPlatform.Android : AppPlatform.Ios;
@@ -148,11 +157,21 @@ export default class SimulatorStart extends EasCommand {
       );
     }
 
+    if (jsonFlag) {
+      printJsonOnlyOutput({
+        id: deviceRunSessionId,
+        type: flags.type,
+        jobRunUrl,
+        remoteConfig,
+      });
+      return;
+    }
+
     Log.newLine();
     Log.log(formatRemoteSessionInstructions(remoteConfig));
     Log.newLine();
 
-    if (flags['non-interactive']) {
+    if (nonInteractive) {
       Log.log(
         `When you are done, stop the session with: eas simulator:stop --id ${deviceRunSessionId}`
       );

packages/eas-cli/src/commands/simulator/stop.ts

@@ -6,7 +6,6 @@ import { DeviceRunSessionMutation } from '../../graphql/mutations/DeviceRunSessi
 import { ora } from '../../ora';
 
 export default class SimulatorStop extends EasCommand {
-  static override hidden = true;
   static override description =
     '[EXPERIMENTAL] stop a remote simulator session on EAS by its device run session ID';
 

packages/eas-cli/src/graphql/generated.ts

@@ -120,6 +120,7 @@ export type Account = {
   /** Billing information. Only visible to members with the ADMIN or OWNER role. */
   billing?: Maybe<Billing>;
   billingPeriod: BillingPeriod;
+  concurrencyConsumers: Array<ConcurrencyConsumer>;
   /** Convex team connections for this account */
   convexTeamConnections: Array<ConvexTeamConnection>;
   createdAt: Scalars['DateTime']['output'];
@@ -399,6 +400,15 @@ export type AccountBillingPeriodArgs = {
 };
 
 
+/**
+ * An account is a container owning projects, credentials, billing and other organization
+ * data and settings. Actors may own and be members of accounts.
+ */
+export type AccountConcurrencyConsumersArgs = {
+  limit?: Scalars['Int']['input'];
+};
+
+
 /**
  * An account is a container owning projects, credentials, billing and other organization
  * data and settings. Actors may own and be members of accounts.
@@ -2167,6 +2177,7 @@ export type AppObserveCustomEventNamesArgs = {
   appVersion?: InputMaybe<Scalars['String']['input']>;
   endTime: Scalars['DateTime']['input'];
   environment?: InputMaybe<Scalars['String']['input']>;
+  isEmbeddedUpdate?: InputMaybe<Scalars['Boolean']['input']>;
   orderBy?: InputMaybe<AppObserveCustomEventNamesOrderBy>;
   platform?: InputMaybe<AppObservePlatform>;
   startTime: Scalars['DateTime']['input'];
@@ -2209,10 +2220,23 @@ export type AppObserveUpdatesArgs = {
   input: AppObserveUpdatesInput;
 };
 
+export type AppObserveAppBuildEmbeddedSummary = {
+  __typename?: 'AppObserveAppBuildEmbeddedSummary';
+  eventCount: Scalars['Int']['output'];
+  firstSeenAt: Scalars['DateTime']['output'];
+  uniqueUserCount: Scalars['Int']['output'];
+};
+
 export type AppObserveAppBuildNumber = {
   __typename?: 'AppObserveAppBuildNumber';
   appBuildNumber: Scalars['String']['output'];
   easBuilds: Array<AppObserveAppEasBuild>;
+  /**
+   * Summary restricted to events running this build's embedded bundle
+   * (no OTA update applied). Null when the build has no such events
+   * in the queried time range.
+   */
+  embedded?: Maybe<AppObserveAppBuildEmbeddedSummary>;
   eventCount: Scalars['Int']['output'];
   firstSeenAt: Scalars['DateTime']['output'];
   uniqueUserCount: Scalars['Int']['output'];
@@ -2229,6 +2253,7 @@ export type AppObserveAppEasBuild = {
 export type AppObserveAppUpdate = {
   __typename?: 'AppObserveAppUpdate';
   appUpdateId: Scalars['String']['output'];
+  appUpdateMessage?: Maybe<Scalars['String']['output']>;
   easBuilds: Array<AppObserveAppEasBuild>;
   eventCount: Scalars['Int']['output'];
   firstSeenAt: Scalars['DateTime']['output'];
@@ -2259,6 +2284,7 @@ export type AppObserveCustomEvent = {
   appEasBuildId?: Maybe<Scalars['String']['output']>;
   appIdentifier: Scalars['String']['output'];
   appUpdateId?: Maybe<Scalars['String']['output']>;
+  appUpdateMessage?: Maybe<Scalars['String']['output']>;
   appVersion: Scalars['String']['output'];
   clientVersion?: Maybe<Scalars['String']['output']>;
   countryCode?: Maybe<Scalars['String']['output']>;
@@ -2300,6 +2326,7 @@ export type AppObserveCustomEventCountsInput = {
   endTime: Scalars['DateTime']['input'];
   environment?: InputMaybe<Scalars['String']['input']>;
   eventName: Scalars['String']['input'];
+  isEmbeddedUpdate?: InputMaybe<Scalars['Boolean']['input']>;
   platform: AppObservePlatform;
   startTime: Scalars['DateTime']['input'];
 };
@@ -2325,6 +2352,7 @@ export type AppObserveCustomEventListFilter = {
   endTime?: InputMaybe<Scalars['DateTime']['input']>;
   environment?: InputMaybe<Scalars['String']['input']>;
   eventName?: InputMaybe<Scalars['String']['input']>;
+  isEmbeddedUpdate?: InputMaybe<Scalars['Boolean']['input']>;
   platform?: InputMaybe<AppObservePlatform>;
   propertyFilters?: InputMaybe<Array<AppObserveCustomEventPropertyFilter>>;
   sessionId?: InputMaybe<Scalars['String']['input']>;
@@ -2369,6 +2397,7 @@ export type AppObserveEvent = {
   appIdentifier: Scalars['String']['output'];
   appName: Scalars['String']['output'];
   appUpdateId?: Maybe<Scalars['String']['output']>;
+  appUpdateMessage?: Maybe<Scalars['String']['output']>;
   appVersion: Scalars['String']['output'];
   clientVersion?: Maybe<Scalars['String']['output']>;
   countryCode?: Maybe<Scalars['String']['output']>;
@@ -2423,6 +2452,7 @@ export type AppObserveEventsFilter = {
   easClientId?: InputMaybe<Scalars['String']['input']>;
   endTime?: InputMaybe<Scalars['DateTime']['input']>;
   environment?: InputMaybe<Scalars['String']['input']>;
+  isEmbeddedUpdate?: InputMaybe<Scalars['Boolean']['input']>;
   metricName?: InputMaybe<Scalars['String']['input']>;
   platform?: InputMaybe<AppObservePlatform>;
   routeName?: InputMaybe<Scalars['String']['input']>;
@@ -2479,6 +2509,7 @@ export type AppObserveNavigationRoutesFilter = {
   endTime: Scalars['DateTime']['input'];
   environment?: InputMaybe<Scalars['String']['input']>;
   platform: AppObservePlatform;
+  routeNames?: InputMaybe<Array<Scalars['String']['input']>>;
   startTime: Scalars['DateTime']['input'];
 };
 
@@ -2556,6 +2587,7 @@ export type AppObserveTimeSeriesInput = {
   bucketIntervalMinutes?: InputMaybe<Scalars['Int']['input']>;
   endTime: Scalars['DateTime']['input'];
   environment?: InputMaybe<Scalars['String']['input']>;
+  isEmbeddedUpdate?: InputMaybe<Scalars['Boolean']['input']>;
   metricName: Scalars['String']['input'];
   platform: AppObservePlatform;
   routeName?: InputMaybe<Scalars['String']['input']>;
@@ -2577,6 +2609,7 @@ export type AppObserveTimeSeriesStatistics = {
 export type AppObserveUpdate = {
   __typename?: 'AppObserveUpdate';
   appUpdateId: Scalars['String']['output'];
+  appUpdateMessage?: Maybe<Scalars['String']['output']>;
   appVersion: Scalars['String']['output'];
   downloadCount: Scalars['Int']['output'];
   firstSeenAt: Scalars['DateTime']['output'];
@@ -3470,6 +3503,16 @@ export enum AppsFilter {
   New = 'NEW'
 }
 
+export type ArgentRunSessionRemoteConfig = {
+  __typename?: 'ArgentRunSessionRemoteConfig';
+  toolsUrl: Scalars['String']['output'];
+  /**
+   * URL of the web preview surface for the session. Null when web previews are
+   * not available for the platform (e.g. Android).
+   */
+  webPreviewUrl?: Maybe<Scalars['String']['output']>;
+};
+
 export type AscApiKeyInput = {
   issuerIdentifier: Scalars['String']['input'];
   keyIdentifier: Scalars['String']['input'];
@@ -4179,6 +4222,7 @@ export enum BuildPhase {
   EasBuildInternal = 'EAS_BUILD_INTERNAL',
   FailBuild = 'FAIL_BUILD',
   FixGradlew = 'FIX_GRADLEW',
+  GradleBuildProfile = 'GRADLE_BUILD_PROFILE',
   InstallCustomTools = 'INSTALL_CUSTOM_TOOLS',
   InstallDependencies = 'INSTALL_DEPENDENCIES',
   InstallPods = 'INSTALL_PODS',
@@ -4187,6 +4231,7 @@ export enum BuildPhase {
   OnBuildErrorHook = 'ON_BUILD_ERROR_HOOK',
   OnBuildSuccessHook = 'ON_BUILD_SUCCESS_HOOK',
   ParseCustomWorkflowConfig = 'PARSE_CUSTOM_WORKFLOW_CONFIG',
+  ParseXcactivitylog = 'PARSE_XCACTIVITYLOG',
   PostInstallHook = 'POST_INSTALL_HOOK',
   Prebuild = 'PREBUILD',
   PrepareArtifacts = 'PREPARE_ARTIFACTS',
@@ -4410,6 +4455,8 @@ export type Concurrencies = {
   total: Scalars['Int']['output'];
 };
 
+export type ConcurrencyConsumer = Build | JobRun;
+
 export enum ContinentCode {
   Af = 'AF',
   An = 'AN',
@@ -5230,7 +5277,7 @@ export type DeviceRunSessionQueryByIdArgs = {
   deviceRunSessionId: Scalars['ID']['input'];
 };
 
-export type DeviceRunSessionRemoteConfig = AgentDeviceRunSessionRemoteConfig | ServeSimRunSessionRemoteConfig;
+export type DeviceRunSessionRemoteConfig = AgentDeviceRunSessionRemoteConfig | ArgentRunSessionRemoteConfig | ServeSimRunSessionRemoteConfig;
 
 export enum DeviceRunSessionStatus {
   Errored = 'ERRORED',
@@ -5241,6 +5288,7 @@ export enum DeviceRunSessionStatus {
 
 export enum DeviceRunSessionType {
   AgentDevice = 'AGENT_DEVICE',
+  Argent = 'ARGENT',
   ServeSim = 'SERVE_SIM'
 }
 
@@ -6000,6 +6048,67 @@ export type EditUpdateBranchInput = {
   newName: Scalars['String']['input'];
 };
 
+export type EmbeddedUpdate = {
+  __typename?: 'EmbeddedUpdate';
+  channel: Scalars['String']['output'];
+  createdAt: Scalars['DateTime']['output'];
+  /** The manifest UUID baked into the binary by expo-updates at build time. */
+  id: Scalars['ID']['output'];
+  launchAsset: EmbeddedUpdateAsset;
+  platform: AppPlatform;
+  runtimeVersion: Scalars['String']['output'];
+};
+
+export type EmbeddedUpdateAsset = {
+  __typename?: 'EmbeddedUpdateAsset';
+  contentType: Scalars['String']['output'];
+  fileSHA256: Scalars['String']['output'];
+  fileSize: Scalars['Int']['output'];
+  finalFileSize?: Maybe<Scalars['Int']['output']>;
+  id: Scalars['ID']['output'];
+  storageKey: Scalars['String']['output'];
+};
+
+export type EmbeddedUpdateAssetMutation = {
+  __typename?: 'EmbeddedUpdateAssetMutation';
+  /**
+   * Returns a presigned POST URL for uploading an embedded update bundle.
+   * Requires PUBLISH permission on the app.
+   */
+  getSignedEmbeddedUpdateAssetUploadSpecifications: EmbeddedUpdateAssetUploadSpec;
+};
+
+
+export type EmbeddedUpdateAssetMutationGetSignedEmbeddedUpdateAssetUploadSpecificationsArgs = {
+  appId: Scalars['ID']['input'];
+  contentType: Scalars['String']['input'];
+  embeddedUpdateId: Scalars['ID']['input'];
+};
+
+export type EmbeddedUpdateAssetUploadSpec = {
+  __typename?: 'EmbeddedUpdateAssetUploadSpec';
+  /** Form fields that must be included with the POST request alongside the file. */
+  fields: Scalars['JSONObject']['output'];
+  /** Presigned POST URL targeting the upload bucket. Valid for one hour. */
+  presignedUrl: Scalars['String']['output'];
+  /** Storage key (`{appId}/{embeddedUpdateId}`). Same key in both upload and destination buckets. */
+  storageKey: Scalars['String']['output'];
+};
+
+export type EmbeddedUpdateMutation = {
+  __typename?: 'EmbeddedUpdateMutation';
+  /**
+   * Register an embedded bundle as the launch asset for a given app/platform/channel.
+   * Returns EMBEDDED_UPDATE_ASSET_NOT_AVAILABLE if the asset has not been finalized yet.
+   */
+  uploadEmbeddedUpdate: EmbeddedUpdate;
+};
+
+
+export type EmbeddedUpdateMutationUploadEmbeddedUpdateArgs = {
+  input: UploadEmbeddedUpdateInput;
+};
+
 export enum EntityTypeName {
   AccountEntity = 'AccountEntity',
   AccountSsoConfigurationEntity = 'AccountSSOConfigurationEntity',
@@ -7264,6 +7373,7 @@ export type JobRun = {
   createdAt: Scalars['DateTime']['output'];
   displayName?: Maybe<Scalars['String']['output']>;
   endedAt?: Maybe<Scalars['DateTime']['output']>;
+  enqueuedAt?: Maybe<Scalars['DateTime']['output']>;
   errors: Array<JobRunError>;
   expiresAt: Scalars['DateTime']['output'];
   gitCommitHash?: Maybe<Scalars['String']['output']>;
@@ -7275,6 +7385,8 @@ export type JobRun = {
   logFileUrls: Array<Scalars['String']['output']>;
   name: Scalars['String']['output'];
   priority: JobRunPriority;
+  /** String describing the worker profile used to run this job run. */
+  resourceClassDisplayName: Scalars['String']['output'];
   startedAt?: Maybe<Scalars['DateTime']['output']>;
   status: JobRunStatus;
   updateGroups: Array<Array<Update>>;
@@ -8154,6 +8266,9 @@ export type RootMutation = {
   echoTurn: EchoTurnMutation;
   /** Mutations for Echo versions */
   echoVersion: EchoVersionMutation;
+  /** Mutations that register embedded update bundles for bundle diffing. */
+  embeddedUpdate: EmbeddedUpdateMutation;
+  embeddedUpdateAsset: EmbeddedUpdateAssetMutation;
   /** Mutations that create and delete EnvironmentSecrets */
   environmentSecret: EnvironmentSecretMutation;
   /** Mutations that create and delete EnvironmentVariables */
@@ -9701,6 +9816,16 @@ export type UpdatesMetricsData = {
   labels: Array<Scalars['String']['output']>;
 };
 
+export type UploadEmbeddedUpdateInput = {
+  appId: Scalars['ID']['input'];
+  channel: Scalars['String']['input'];
+  /** UUID baked into the binary by expo-updates at build time (from app.manifest id field). */
+  embeddedUpdateId: Scalars['ID']['input'];
+  platform: AppPlatform;
+  runtimeVersion: Scalars['String']['input'];
+  turtleBuildId?: InputMaybe<Scalars['ID']['input']>;
+};
+
 export type UploadSession = {
   __typename?: 'UploadSession';
   /** Create an Upload Session for a specific account */
@@ -12781,7 +12906,7 @@ export type DeviceRunSessionByIdQueryVariables = Exact<{
 }>;
 
 
-export type DeviceRunSessionByIdQuery = { __typename?: 'RootQuery', deviceRunSessions: { __typename?: 'DeviceRunSessionQuery', byId: { __typename?: 'DeviceRunSession', id: string, status: DeviceRunSessionStatus, type: DeviceRunSessionType, app: { __typename?: 'App', id: string, slug: string, ownerAccount: { __typename?: 'Account', id: string, name: string } }, remoteConfig?: { __typename: 'AgentDeviceRunSessionRemoteConfig', agentDeviceRemoteSessionUrl: string, agentDeviceRemoteSessionToken: string, webPreviewUrl?: string | null } | { __typename: 'ServeSimRunSessionRemoteConfig', previewUrl: string, streamUrl: string } | null, turtleJobRun?: { __typename?: 'JobRun', id: string, status: JobRunStatus } | null } } };
+export type DeviceRunSessionByIdQuery = { __typename?: 'RootQuery', deviceRunSessions: { __typename?: 'DeviceRunSessionQuery', byId: { __typename?: 'DeviceRunSession', id: string, status: DeviceRunSessionStatus, type: DeviceRunSessionType, app: { __typename?: 'App', id: string, slug: string, ownerAccount: { __typename?: 'Account', id: string, name: string } }, remoteConfig?: { __typename: 'AgentDeviceRunSessionRemoteConfig', agentDeviceRemoteSessionUrl: string, agentDeviceRemoteSessionToken: string, webPreviewUrl?: string | null } | { __typename: 'ArgentRunSessionRemoteConfig', toolsUrl: string, webPreviewUrl?: string | null } | { __typename: 'ServeSimRunSessionRemoteConfig', previewUrl: string, streamUrl: string } | null, turtleJobRun?: { __typename?: 'JobRun', id: string, status: JobRunStatus } | null } } };
 
 export type EnvironmentSecretsByAppIdQueryVariables = Exact<{
   appId: Scalars['String']['input'];

packages/eas-cli/src/graphql/queries/DeviceRunSessionQuery.ts

@@ -34,6 +34,10 @@ export const DeviceRunSessionQuery = {
                       agentDeviceRemoteSessionToken
                       webPreviewUrl
                     }
+                    ... on ArgentRunSessionRemoteConfig {
+                      toolsUrl
+                      webPreviewUrl
+                    }
                     ... on ServeSimRunSessionRemoteConfig {
                       previewUrl
                       streamUrl

packages/eas-cli/src/log.ts

@@ -1,4 +1,5 @@
 import chalk from 'chalk';
+import debug from 'debug';
 import figures from 'figures';
 import { boolish } from 'getenv';
 import logSymbols from 'log-symbols';
@@ -6,8 +7,7 @@ import terminalLink from 'terminal-link';
 
 type Color = (...text: string[]) => string;
 
-// eslint-disable-next-line eslint-import/no-extraneous-dependencies
-const nodeDebug = require('debug')('eas:log:debug') as (...args: any[]) => void;
+const nodeDebug = debug('eas:log:debug');
 
 export default class Log {
   public static readonly isDebug = boolish('EXPO_DEBUG', false);
@@ -48,7 +48,8 @@ export default class Log {
       Log.consoleLog(...args);
     } else {
       Log.updateIsLastLineNewLine(args);
-      nodeDebug(...args);
+      const [first, ...rest] = args;
+      nodeDebug(first, ...rest);
     }
   }
 

packages/eas-cli/src/observe/__tests__/fetchNavigationRoutes.test.ts

@@ -85,6 +85,34 @@ describe('fetchObserveNavigationRoutesAsync', () => {
     expect(filter).not.toHaveProperty('appVersion');
     expect(filter).not.toHaveProperty('appUpdateId');
     expect(filter).not.toHaveProperty('appBuildNumber');
+    expect(filter).not.toHaveProperty('routeNames');
+  });
+
+  it('forwards routeNames filter when provided', async () => {
+    await fetchObserveNavigationRoutesAsync(mockGraphqlClient, 'project-123', {
+      startTime: '2025-01-01T00:00:00.000Z',
+      endTime: '2025-03-01T00:00:00.000Z',
+      platforms: [AppPlatform.Ios],
+      limit: 50,
+      routeNames: ['/home', '/profile'],
+    });
+
+    expect(mockNavigationRoutesAsync.mock.calls[0][1].filter.routeNames).toEqual([
+      '/home',
+      '/profile',
+    ]);
+  });
+
+  it('does not send routeNames when array is empty', async () => {
+    await fetchObserveNavigationRoutesAsync(mockGraphqlClient, 'project-123', {
+      startTime: '2025-01-01T00:00:00.000Z',
+      endTime: '2025-03-01T00:00:00.000Z',
+      platforms: [AppPlatform.Ios],
+      limit: 50,
+      routeNames: [],
+    });
+
+    expect(mockNavigationRoutesAsync.mock.calls[0][1].filter).not.toHaveProperty('routeNames');
   });
 
   it('forwards after cursor when provided', async () => {

packages/eas-cli/src/observe/fetchNavigationRoutes.ts

@@ -25,6 +25,7 @@ export interface FetchNavigationRoutesOptions {
   appVersion?: string;
   updateId?: string;
   buildNumber?: string;
+  routeNames?: string[];
   orderBy?: AppObserveNavigationRoutesOrderBy;
 }
 
@@ -55,6 +56,7 @@ export async function fetchObserveNavigationRoutesAsync(
           ...(options.appVersion && { appVersion: options.appVersion }),
           ...(options.updateId && { appUpdateId: options.updateId }),
           ...(options.buildNumber && { appBuildNumber: options.buildNumber }),
+          ...(options.routeNames?.length && { routeNames: options.routeNames }),
         },
         first: options.limit,
         ...(options.after && { after: options.after }),

packages/eas-cli/src/project/expoConfig.ts

@@ -1,12 +1,11 @@
 import { ExpoConfig, getConfig, getConfigFilePaths, modifyConfigAsync } from '@expo/config';
 import { Env } from '@expo/eas-build-job';
-import spawnAsync from '@expo/spawn-async';
 import fs from 'fs-extra';
 import Joi from 'joi';
 import path from 'path';
 
 import { isExpoInstalled } from './projectUtils';
-import Log from '../log';
+import { spawnExpoCommand } from '../utils/expoCli';
 
 export type PublicExpoConfig = Omit<
   ExpoConfig,
@@ -41,8 +40,6 @@ export async function createOrModifyExpoConfigAsync(
   }
 }
 
-let wasExpoConfigWarnPrinted = false;
-
 async function getExpoConfigInternalAsync(
   projectDir: string,
   opts: ExpoConfigOptionsInternal = {}
@@ -56,35 +53,16 @@ async function getExpoConfigInternalAsync(
 
     let exp: ExpoConfig;
     if (isExpoInstalled(projectDir)) {
-      try {
-        const { stdout } = await spawnAsync(
-          'npx',
-          ['expo', 'config', '--json', ...(opts.isPublicConfig ? ['--type', 'public'] : [])],
-
-          {
-            cwd: projectDir,
-            env: {
-              ...process.env,
-              ...opts.env,
-              EXPO_NO_DOTENV: '1',
-            },
-          }
-        );
-        exp = JSON.parse(stdout);
-      } catch (err: any) {
-        if (!wasExpoConfigWarnPrinted) {
-          Log.warn(
-            `Failed to read the app config from the project using "npx expo config" command: ${err.message}.`
-          );
-          Log.warn('Falling back to the version of "@expo/config" shipped with the EAS CLI.');
-          wasExpoConfigWarnPrinted = true;
+      const { stdout } = await spawnExpoCommand(
+        projectDir,
+        ['config', '--json', ...(opts.isPublicConfig ? ['--type', 'public'] : [])],
+        {
+          env: {
+            EXPO_NO_DOTENV: '1',
+          },
         }
-        exp = getConfig(projectDir, {
-          skipSDKVersionRequirement: true,
-          ...(opts.isPublicConfig ? { isPublicConfig: true } : {}),
-          ...(opts.skipPlugins ? { skipPlugins: true } : {}),
-        }).exp;
-      }
+      );
+      exp = JSON.parse(stdout);
     } else {
       exp = getConfig(projectDir, {
         skipSDKVersionRequirement: true,

packages/eas-cli/src/project/ios/entitlements.ts

@@ -1,11 +1,13 @@
 import { ExportedConfig, IOSConfig, compileModsAsync } from '@expo/config-plugins';
 import { JSONObject } from '@expo/json-file';
 import { getPrebuildConfigAsync } from '@expo/prebuild-config';
-import spawnAsync from '@expo/spawn-async';
 
 import Log from '../../log';
+import Sentry from '../../sentry';
+import { spawnExpoCommand } from '../../utils/expoCli';
 import { readPlistAsync } from '../../utils/plist';
 import { Client } from '../../vcs/vcs';
+import { isExpoInstalled } from '../projectUtils';
 import { hasIgnoredIosProjectAsync } from '../workflow';
 
 interface Target {
@@ -13,59 +15,105 @@ interface Target {
   targetName: string;
 }
 
-let wasExpoConfigPluginsWarnPrinted = false;
-
 export async function getManagedApplicationTargetEntitlementsAsync(
   projectDir: string,
   env: Record<string, string>,
   vcsClient: Client
 ): Promise<JSONObject> {
-  const originalProcessEnv: NodeJS.ProcessEnv = process.env;
-
-  try {
-    process.env = {
-      ...process.env,
-      ...env,
-    };
-
-    let expWithMods: ExportedConfig;
+  let expoConfigError: Error | undefined;
+  if (isExpoInstalled(projectDir)) {
     try {
-      const { stdout } = await spawnAsync(
-        'npx',
-        ['expo', 'config', '--json', '--type', 'introspect'],
-
+      const { stdout } = await spawnExpoCommand(
+        projectDir,
+        ['config', '--json', '--type', 'introspect'],
         {
-          cwd: projectDir,
           env: {
-            ...process.env,
             ...env,
             EXPO_NO_DOTENV: '1',
           },
         }
       );
-      expWithMods = JSON.parse(stdout);
-    } catch (err: any) {
-      if (!wasExpoConfigPluginsWarnPrinted) {
-        Log.warn(
-          `Failed to read the app config from the project using "npx expo config" command: ${err.message}.`
-        );
-        Log.warn('Falling back to the version of "@expo/config" shipped with the EAS CLI.');
-        wasExpoConfigPluginsWarnPrinted = true;
+      const expWithMods: ExportedConfig = JSON.parse(stdout);
+      return expWithMods.ios?.entitlements ?? {};
+    } catch (error: any) {
+      try {
+        Sentry.withScope(scope => {
+          if (process.env.EAS_BUILD_PROJECT_ID) {
+            scope.setTag('app_id', process.env.EAS_BUILD_PROJECT_ID);
+          }
+          if (process.env.EAS_BUILD_ID) {
+            scope.setTag('build_id', process.env.EAS_BUILD_ID);
+          }
+          scope.setTag('config_resolution', 'ios_entitlements_introspection');
+          scope.setExtra('message', 'iOS entitlements config fallback');
+          scope.setExtra('stdout', error.stdout);
+          scope.setExtra('stderr', error.stderr);
+          Sentry.captureException(error);
+        });
+      } catch {
+        // do nothing
       }
-      const { exp } = await getPrebuildConfigAsync(projectDir, { platforms: ['ios'] });
-      expWithMods = await compileModsAsync(exp, {
-        projectRoot: projectDir,
-        platforms: ['ios'],
-        introspect: true,
-        ignoreExistingNativeFiles: await hasIgnoredIosProjectAsync(projectDir, vcsClient),
-      });
+
+      expoConfigError = error;
+      Log.warn(
+        `Failed to read the app config from the project using the local Expo CLI: ${formatError(error)}`
+      );
+      Log.warn('Falling back to the version of "@expo/config" shipped with the EAS CLI.');
     }
+  }
+
+  try {
+    return await resolveManagedApplicationTargetEntitlementsWithBundledConfigAsync(
+      projectDir,
+      env,
+      vcsClient
+    );
+  } catch (fallbackError: any) {
+    if (expoConfigError) {
+      throw new Error(
+        `Failed to resolve iOS entitlements from Expo config. The local Expo CLI failed with: ${formatError(
+          expoConfigError
+        )}. The bundled config fallback also failed with: ${formatError(fallbackError)}`,
+        { cause: fallbackError }
+      );
+    }
+    throw new Error(
+      `Failed to resolve iOS entitlements from Expo config using the bundled config fallback: ${formatError(
+        fallbackError
+      )}`,
+      { cause: fallbackError }
+    );
+  }
+}
+
+async function resolveManagedApplicationTargetEntitlementsWithBundledConfigAsync(
+  projectDir: string,
+  env: Record<string, string>,
+  vcsClient: Client
+): Promise<JSONObject> {
+  const originalProcessEnv = process.env;
+  try {
+    process.env = {
+      ...process.env,
+      ...env,
+    };
+    const { exp } = await getPrebuildConfigAsync(projectDir, { platforms: ['ios'] });
+    const expWithMods = await compileModsAsync(exp, {
+      projectRoot: projectDir,
+      platforms: ['ios'],
+      introspect: true,
+      ignoreExistingNativeFiles: await hasIgnoredIosProjectAsync(projectDir, vcsClient),
+    });
     return expWithMods.ios?.entitlements ?? {};
   } finally {
     process.env = originalProcessEnv;
   }
 }
 
+function formatError(error: Error & { stderr?: string; stdout?: string }): string {
+  return error.stderr?.trim() || error.stdout?.trim() || error.message;
+}
+
 export async function getNativeTargetEntitlementsAsync(
   projectDir: string,
   target: Target

packages/eas-cli/src/project/projectUtils.ts

@@ -10,7 +10,7 @@ import { ExpoGraphqlClient } from '../commandUtils/context/contextUtils/createGr
 import { AccountFragment } from '../graphql/generated';
 import { AppQuery } from '../graphql/queries/AppQuery';
 import Log, { learnMore } from '../log';
-import { expoCommandAsync } from '../utils/expoCli';
+import { expoCommandAsync, resolveExpoCli } from '../utils/expoCli';
 
 /**
  * Return a useful name describing the project config.
@@ -45,7 +45,22 @@ export function isExpoNotificationsInstalled(projectDir: string): boolean {
 
 export function isExpoInstalled(projectDir: string): boolean {
   const packageJson = getPackageJson(projectDir);
-  return !!(packageJson.dependencies && 'expo' in packageJson.dependencies);
+  if (!!(packageJson.dependencies && 'expo' in packageJson.dependencies)) {
+    // NOTE(@kitten): We usually don't apply strict checks for installed packages, but
+    // `isExpoInstalled` is often used to check if we should call the Expo CLI, so we're
+    // also checking if we can resolve `expo` here
+    try {
+      return !!resolveExpoCli(projectDir);
+    } catch (e: any) {
+      if (e.code === 'MODULE_NOT_FOUND') {
+        return false;
+      } else {
+        throw e;
+      }
+    }
+  } else {
+    return false;
+  }
 }
 
 export function isExpoUpdatesInstalledAsDevDependency(projectDir: string): boolean {

packages/eas-cli/src/simulator/utils.ts

@@ -24,6 +24,22 @@ export function formatRemoteSessionInstructions(
       }
       return lines.join('\n');
     }
+    case 'ArgentRunSessionRemoteConfig': {
+      const lines = [
+        '🔑 Open the following URL to access the Argent tools for this session:',
+        '',
+        remoteConfig.toolsUrl,
+      ];
+      if (remoteConfig.webPreviewUrl) {
+        lines.push(
+          '',
+          '🌐 Open the following URL in your browser to preview the simulator:',
+          '',
+          remoteConfig.webPreviewUrl
+        );
+      }
+      return lines.join('\n');
+    }
     case 'ServeSimRunSessionRemoteConfig':
       return [
         '🌐 Open the following URL in your browser to access the simulator:',

packages/eas-cli/src/user/__tests__/SessionManager-test.ts

@@ -294,7 +294,7 @@ describe(SessionManager, () => {
           username: 'USERNAME',
         });
 
-      await sessionManager.showLoginPromptAsync();
+      await sessionManager.showLoginPromptAsync({ browser: false });
 
       expect(sessionManagerRetryUsernamePasswordAuthWithOTPAsyncSpy).toHaveBeenCalledWith(
         'hello',
@@ -313,7 +313,7 @@ describe(SessionManager, () => {
       );
     });
 
-    it('calls regular login if the sso flag is false', async () => {
+    it('calls regular login by default', async () => {
       jest
         .mocked(promptAsync)
         .mockImplementationOnce(async () => ({ username: 'USERNAME', password: 'PASSWORD' }))
@@ -321,14 +321,19 @@ describe(SessionManager, () => {
           throw new Error("shouldn't happen");
         });
 
+      jest.mocked(fetchSessionSecretAndUserAsync).mockResolvedValue({
+        sessionSecret: 'SESSION_SECRET',
+        id: 'USER_ID',
+        username: 'USERNAME',
+      });
       const sessionManager = new SessionManager(analytics);
 
-      // Regular login
-      await sessionManager.showLoginPromptAsync({ sso: false });
+      await sessionManager.showLoginPromptAsync();
+
       expect(fetchSessionSecretAndUserAsync).toHaveBeenCalled();
     });
 
-    it('calls regular login if the sso flag is undefined', async () => {
+    it('calls regular login when browser is false', async () => {
       jest
         .mocked(promptAsync)
         .mockImplementationOnce(async () => ({ username: 'USERNAME', password: 'PASSWORD' }))
@@ -338,8 +343,21 @@ describe(SessionManager, () => {
 
       const sessionManager = new SessionManager(analytics);
 
-      // Regular login
-      await sessionManager.showLoginPromptAsync({ sso: undefined });
+      await sessionManager.showLoginPromptAsync({ browser: false });
+      expect(fetchSessionSecretAndUserAsync).toHaveBeenCalled();
+    });
+
+    it('calls regular login if the sso flag is false and browser is false', async () => {
+      jest
+        .mocked(promptAsync)
+        .mockImplementationOnce(async () => ({ username: 'USERNAME', password: 'PASSWORD' }))
+        .mockImplementation(() => {
+          throw new Error("shouldn't happen");
+        });
+
+      const sessionManager = new SessionManager(analytics);
+
+      await sessionManager.showLoginPromptAsync({ sso: false, browser: false });
       expect(fetchSessionSecretAndUserAsync).toHaveBeenCalled();
     });
 

packages/eas-cli/src/utils/expoCli.ts

@@ -2,6 +2,7 @@ import { ExpoConfig } from '@expo/config';
 import spawnAsync from '@expo/spawn-async';
 import chalk from 'chalk';
 import { boolish } from 'getenv';
+import type { CommonSpawnOptions } from 'node:child_process';
 import resolveFrom, { silent as silentResolveFrom } from 'resolve-from';
 import semver from 'semver';
 
@@ -77,18 +78,20 @@ export const shouldUseVersionedExpoCLIWithExplicitPlatforms = memoize(
   shouldUseVersionedExpoCLIWithExplicitPlatformsExpensive
 );
 
-export async function expoCommandAsync(
+export function resolveExpoCli(projectDir: string): string {
+  return (
+    silentResolveFrom(projectDir, 'expo/bin/cli') ?? resolveFrom(projectDir, 'expo/bin/cli.js')
+  );
+}
+
+export function spawnExpoCommand(
   projectDir: string,
   args: string[],
-  {
-    silent = false,
-    extraEnv = {},
-  }: { silent?: boolean; extraEnv?: Record<string, string | undefined> } = {}
-): Promise<void> {
+  opts?: CommonSpawnOptions
+): spawnAsync.SpawnPromise<spawnAsync.SpawnResult> {
   let expoCliPath;
   try {
-    expoCliPath =
-      silentResolveFrom(projectDir, 'expo/bin/cli') ?? resolveFrom(projectDir, 'expo/bin/cli.js');
+    expoCliPath = resolveExpoCli(projectDir);
   } catch (e: any) {
     if (e.code === 'MODULE_NOT_FOUND') {
       throw new Error(
@@ -101,25 +104,39 @@ export async function expoCommandAsync(
   }
 
   const spawnPromise = spawnAsync(expoCliPath, args, {
-    stdio: ['inherit', 'pipe', 'pipe'], // inherit stdin so user can install a missing expo-cli from inside this command
+    cwd: projectDir,
+    ...opts,
     env: {
       ...process.env,
-      ...extraEnv,
+      ...opts?.env,
     },
   });
-  const {
-    child: { stdout, stderr },
-  } = spawnPromise;
-  if (!(stdout && stderr)) {
+  if (!spawnPromise.child.stdout && !spawnPromise.child.stderr) {
     throw new Error('Failed to spawn expo-cli');
   }
+
+  return spawnPromise;
+}
+
+export async function expoCommandAsync(
+  projectDir: string,
+  args: string[],
+  {
+    silent = false,
+    extraEnv = {},
+  }: { silent?: boolean; extraEnv?: Record<string, string | undefined> } = {}
+): Promise<void> {
+  const spawnPromise = spawnExpoCommand(projectDir, args, {
+    stdio: ['inherit', 'pipe', 'pipe'], // inherit stdin so user can install a missing expo-cli from inside this command
+    env: extraEnv,
+  });
   if (!silent) {
-    stdout.on('data', data => {
+    spawnPromise.child.stdout?.on('data', data => {
       for (const line of data.toString().trim().split('\n')) {
         Log.log(`${chalk.gray('[expo-cli]')} ${line}`);
       }
     });
-    stderr.on('data', data => {
+    spawnPromise.child.stderr?.on('data', data => {
       for (const line of data.toString().trim().split('\n')) {
         Log.warn(`${chalk.gray('[expo-cli]')} ${line}`);
       }

packages/eas-json/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/eas-json",
-  "version": "18.12.0",
+  "version": "19.0.0",
   "description": "A library for interacting with eas.json",
   "homepage": "https://github.com/expo/eas-cli",
   "bugs": "https://github.com/expo/eas-cli/issues",
@@ -32,7 +32,7 @@
   },
   "dependencies": {
     "@babel/code-frame": "7.23.5",
-    "@expo/eas-build-job": "18.12.0",
+    "@expo/eas-build-job": "19.0.0",
     "chalk": "4.1.2",
     "env-string": "1.0.1",
     "fs-extra": "11.2.0",

packages/local-build-plugin/package.json

@@ -1,6 +1,6 @@
 {
   "name": "eas-cli-local-build-plugin",
-  "version": "18.12.3",
+  "version": "19.0.0",
   "description": "Tool for running EAS compatible builds on a local machine.",
   "bugs": "https://github.com/expo/eas-cli/issues",
   "license": "BUSL-1.1",
@@ -26,11 +26,11 @@
     "clean": "rimraf node_modules dist coverage \"*.tsbuildinfo\""
   },
   "dependencies": {
-    "@expo/build-tools": "18.12.3",
-    "@expo/eas-build-job": "18.12.0",
-    "@expo/logger": "18.5.0",
+    "@expo/build-tools": "19.0.0",
+    "@expo/eas-build-job": "19.0.0",
+    "@expo/logger": "19.0.0",
     "@expo/spawn-async": "^1.7.2",
-    "@expo/turtle-spawn": "18.5.0",
+    "@expo/turtle-spawn": "19.0.0",
     "bunyan": "^1.8.15",
     "chalk": "4.1.2",
     "env-paths": "^2.2.1",

packages/logger/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/logger",
-  "version": "18.5.0",
+  "version": "19.0.0",
   "bugs": "https://github.com/expo/eas-cli/issues",
   "license": "BUSL-1.1",
   "author": "Expo <[email protected]>",

packages/steps/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/steps",
-  "version": "18.12.0",
+  "version": "19.0.0",
   "bugs": "https://github.com/expo/eas-cli/issues",
   "license": "BUSL-1.1",
   "author": "Expo <[email protected]>",
@@ -27,8 +27,8 @@
     "clean": "rimraf node_modules dist coverage \"*.tsbuildinfo\""
   },
   "dependencies": {
-    "@expo/eas-build-job": "18.12.0",
-    "@expo/logger": "18.5.0",
+    "@expo/eas-build-job": "19.0.0",
+    "@expo/logger": "19.0.0",
     "@expo/spawn-async": "^1.7.2",
     "arg": "^5.0.2",
     "fs-extra": "^11.2.0",

packages/template-file/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/template-file",
-  "version": "18.5.0",
+  "version": "19.0.0",
   "bugs": "https://github.com/expo/eas-cli/issues",
   "license": "BUSL-1.1",
   "author": "Expo <[email protected]>",

packages/turtle-spawn/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/turtle-spawn",
-  "version": "18.5.0",
+  "version": "19.0.0",
   "bugs": "https://github.com/expo/eas-cli/issues",
   "license": "BUSL-1.1",
   "author": "Expo <[email protected]>",
@@ -25,7 +25,7 @@
     "clean": "rimraf node_modules dist coverage \"*.tsbuildinfo\""
   },
   "dependencies": {
-    "@expo/logger": "18.5.0",
+    "@expo/logger": "19.0.0",
     "@expo/spawn-async": "^1.7.2"
   },
   "devDependencies": {

packages/worker/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@expo/worker",
-  "version": "18.13.0",
+  "version": "19.0.0",
   "private": true,
   "scripts": {
     "start": "yarn watch",
@@ -19,18 +19,18 @@
   },
   "dependencies": {
     "@babel/core": "7.24.7",
-    "@expo/build-tools": "18.12.3",
+    "@expo/build-tools": "19.0.0",
     "@expo/config-plugins": "55.0.7",
     "@expo/config-types": "55.0.5",
-    "@expo/downloader": "18.5.0",
-    "@expo/eas-build-job": "18.12.0",
-    "@expo/logger": "18.5.0",
+    "@expo/downloader": "19.0.0",
+    "@expo/eas-build-job": "19.0.0",
+    "@expo/logger": "19.0.0",
     "@expo/results": "1.0.0",
     "@expo/rudder-sdk-node": "1.1.1",
     "@expo/spawn-async": "1.7.2",
-    "@expo/steps": "18.12.0",
-    "@expo/template-file": "18.5.0",
-    "@expo/turtle-spawn": "18.5.0",
+    "@expo/steps": "19.0.0",
+    "@expo/template-file": "19.0.0",
+    "@expo/turtle-spawn": "19.0.0",
     "@hapi/boom": "10.0.1",
     "check-disk-space": "3.4.0",
     "fast-glob": "3.3.2",

packages/worker/src/__unit__/service.test.ts

@@ -1,12 +1,57 @@
-import { errors } from '@expo/eas-build-job';
+import { Datadog } from '@expo/build-tools';
+import { BuildPhase, BuildPhaseResult, Job, errors } from '@expo/eas-build-job';
 import spawn from '@expo/turtle-spawn';
 import { vol } from 'memfs';
 import path from 'path';
 
-import { getExpoPackageVersionAsync } from '../service';
+import { build } from '../build';
+import { createBuildContext } from '../context';
+import { createBuildLoggerWithSecretsFilter } from '../logger';
+import BuildService, { getExpoPackageVersionAsync } from '../service';
 
 jest.mock('fs');
+jest.mock('@expo/build-tools', () => {
+  const actual = jest.requireActual('@expo/build-tools');
+  return {
+    ...actual,
+    GCS: { uploadWithSignedUrl: jest.fn() },
+    Datadog: {
+      setup: jest.fn(),
+      flushAsync: jest.fn(async () => {}),
+    },
+  };
+});
 jest.mock('@expo/turtle-spawn', () => jest.fn());
+jest.mock('../build', () => ({
+  build: jest.fn(),
+}));
+jest.mock('../context', () => ({
+  createBuildContext: jest.fn(() => ({ job: {} })),
+}));
+jest.mock('../config', () => {
+  const actual = jest.requireActual('../config').default;
+  return {
+    __esModule: true,
+    default: { ...actual, buildId: 'build-id' },
+  };
+});
+jest.mock('../logger', () => ({
+  __esModule: true,
+  default: {
+    debug: jest.fn(),
+    info: jest.fn(),
+    warn: jest.fn(),
+    error: jest.fn(),
+    level: jest.fn(),
+  },
+  createBuildLoggerWithSecretsFilter: jest.fn(),
+}));
+
+const buildMock = jest.mocked(build);
+const createBuildContextMock = jest.mocked(createBuildContext);
+const createBuildLoggerWithSecretsFilterMock = jest.mocked(createBuildLoggerWithSecretsFilter);
+const datadogSetupMock = jest.mocked(Datadog.setup);
+const datadogFlushAsyncMock = jest.mocked(Datadog.flushAsync);
 
 describe(getExpoPackageVersionAsync, () => {
   const projectRoot = '/test-project';
@@ -59,3 +104,124 @@ describe(getExpoPackageVersionAsync, () => {
     await expect(getExpoPackageVersionAsync(buildContext)).rejects.toBeInstanceOf(errors.UserError);
   });
 });
+
+describe('BuildService.reportBuildPhaseStats', () => {
+  beforeEach(() => {
+    jest.clearAllMocks();
+  });
+
+  it('sends phase stats to the launcher websocket', () => {
+    const send = jest.fn();
+    const service = new BuildService();
+    service.setWS({ send } as any);
+
+    const stats = {
+      buildPhase: BuildPhase.RUN_FASTLANE,
+      result: BuildPhaseResult.SUCCESS,
+      durationMs: 1234,
+    };
+    service.reportBuildPhaseStats(stats);
+
+    expect(send).toHaveBeenCalledWith({
+      type: 'build-phase-stats',
+      ...stats,
+    });
+  });
+
+  it('does not send phase stats when there is no launcher websocket', () => {
+    const service = new BuildService();
+
+    service.reportBuildPhaseStats({
+      buildPhase: BuildPhase.PREPARE_PROJECT,
+      result: BuildPhaseResult.SUCCESS,
+      durationMs: 1,
+    });
+
+    expect(datadogSetupMock).not.toHaveBeenCalled();
+  });
+});
+
+describe('BuildService Datadog setup', () => {
+  const buildLogger = { child: jest.fn(() => buildLogger) } as any;
+
+  beforeEach(() => {
+    jest.clearAllMocks();
+    buildMock.mockResolvedValue({});
+    createBuildContextMock.mockReturnValue({ job: {} } as any);
+    createBuildLoggerWithSecretsFilterMock.mockResolvedValue({
+      logger: buildLogger,
+      cleanUp: jest.fn(async () => {}),
+      logBuffer: { getLogs: () => [], getPhaseLogs: () => [] } as any,
+      outputStream: {} as any,
+    });
+  });
+
+  it('configures Datadog for build jobs', async () => {
+    const service = new BuildService();
+    service.checkForHangingWorker = jest.fn(async () => {});
+
+    await (service as any).startBuildInternal({
+      job: {
+        platform: 'ios',
+        secrets: { robotAccessToken: 'token-abc' },
+      } as Job,
+      metadata: {},
+      projectId: 'project-id',
+      initiatingUserId: 'user-id',
+    });
+
+    expect(datadogSetupMock).toHaveBeenCalledWith({
+      expoApiV2BaseUrl: expect.any(String),
+      turtleBuildId: 'build-id',
+      robotAccessToken: 'token-abc',
+    });
+    expect(createBuildContextMock).toHaveBeenCalledWith(
+      expect.objectContaining({
+        reportBuildPhaseStatsFn: expect.any(Function),
+      })
+    );
+    expect(datadogFlushAsyncMock).toHaveBeenCalled();
+  });
+
+  it('configures Datadog for non-platform jobs with the turtle build id', async () => {
+    const service = new BuildService();
+    service.checkForHangingWorker = jest.fn(async () => {});
+
+    await (service as any).startBuildInternal({
+      job: {
+        secrets: { robotAccessToken: 'token-abc' },
+      } as Job,
+      metadata: {},
+      projectId: 'project-id',
+      initiatingUserId: 'user-id',
+    });
+
+    expect(datadogSetupMock).toHaveBeenCalledWith({
+      expoApiV2BaseUrl: expect.any(String),
+      turtleBuildId: 'build-id',
+      robotAccessToken: 'token-abc',
+    });
+    expect(createBuildContextMock).toHaveBeenCalledWith(
+      expect.objectContaining({
+        reportBuildPhaseStatsFn: expect.any(Function),
+      })
+    );
+  });
+
+  it('leaves Datadog unconfigured when the robot access token is unavailable', async () => {
+    const service = new BuildService();
+    service.checkForHangingWorker = jest.fn(async () => {});
+
+    await (service as any).startBuildInternal({
+      job: {
+        platform: 'ios',
+        secrets: {},
+      } as Job,
+      metadata: {},
+      projectId: 'project-id',
+      initiatingUserId: 'user-id',
+    });
+
+    expect(datadogSetupMock).not.toHaveBeenCalled();
+  });
+});

packages/worker/src/build.ts

@@ -1,4 +1,12 @@
-import { Artifacts, BuildContext, Builders, runGenericJobAsync } from '@expo/build-tools';
+import {
+  Artifacts,
+  BuildContext,
+  Builders,
+  Sentry,
+  parseGradleProfile,
+  formatGradleProfileReport,
+  runGenericJobAsync,
+} from '@expo/build-tools';
 import {
   Android,
   BuildJob,
@@ -13,6 +21,7 @@ import {
 } from '@expo/eas-build-job';
 import { bunyan } from '@expo/logger';
 import omit from 'lodash/omit';
+import path from 'path';
 
 import config from './config';
 import { displayWorkerRuntimeInfo } from './displayRuntimeInfo';
@@ -83,6 +92,21 @@ export async function build({
 
     analytics.logEvent(Event.WORKER_BUILD_SUCCESS, {});
 
+    if (job.platform === Platform.ANDROID) {
+      try {
+        await ctx.runBuildPhase(BuildPhase.GRADLE_BUILD_PROFILE, async () => {
+          const androidDir = path.join(ctx.getReactNativeProjectDirectory(), 'android');
+          const profileTasks = await parseGradleProfile(androidDir);
+          if (profileTasks.length > 0) {
+            const report = formatGradleProfileReport(profileTasks);
+            ctx.logger.info(report);
+          }
+        });
+      } catch (err: any) {
+        Sentry.capture('Failed to parse Gradle build profile', err);
+      }
+    }
+
     return artifacts;
   } catch (err: any) {
     if ('mode' in job && ![BuildMode.CUSTOM, BuildMode.REPACK].includes(job.mode)) {

packages/worker/src/service.ts

@@ -1,6 +1,7 @@
 import {
   Artifacts,
   BuildContext,
+  Datadog,
   Hook,
   findAndUploadXcodeBuildLogsAsync,
   runHookIfPresent,
@@ -122,6 +123,7 @@ export default class BuildService {
     const isSocketClosed: boolean = !this.ws;
     // wait 5 seconds to make sure all logs are flushed
     await setTimeoutAsync(5 * 1000);
+    await Datadog.flushAsync();
     await this.logsCleanUp?.();
     if (this.ws) {
       logger.info('Send build result - error');
@@ -143,6 +145,7 @@ export default class BuildService {
       buildArtifactsName: artifacts.BUILD_ARTIFACTS ?? null,
     });
     const isSocketClosed: boolean = !this.ws;
+    await Datadog.flushAsync();
     await this.logsCleanUp?.();
     if (this.ws) {
       logger.info('Send build result - success');
@@ -195,6 +198,7 @@ export default class BuildService {
     }
 
     const isSocketClosed: boolean = !this.ws;
+    await Datadog.flushAsync();
     await this.logsCleanUp?.();
     if (this.ws) {
       logger.info('Send build result - aborted');
@@ -286,6 +290,14 @@ export default class BuildService {
       this.logsCleanUp = cleanUp;
 
       const analytics = new Analytics(initiatingUserId, metadata?.trackingContext ?? {});
+      const robotAccessToken = job.secrets?.robotAccessToken;
+      if (robotAccessToken) {
+        Datadog.setup({
+          expoApiV2BaseUrl: config.wwwApiV2BaseUrl,
+          turtleBuildId: this.buildId,
+          robotAccessToken,
+        });
+      }
 
       const ctx = createBuildContext({
         job,

yarn.lock

@@ -2856,24 +2856,24 @@ __metadata:
   languageName: node
   linkType: hard
 
-"@expo/build-tools@npm:18.12.3, @expo/build-tools@workspace:packages/build-tools":
+"@expo/build-tools@npm:19.0.0, @expo/build-tools@workspace:packages/build-tools":
   version: 0.0.0-use.local
   resolution: "@expo/build-tools@workspace:packages/build-tools"
   dependencies:
     "@expo/config": "npm:55.0.10"
     "@expo/config-plugins": "npm:55.0.7"
-    "@expo/downloader": "npm:18.5.0"
-    "@expo/eas-build-job": "npm:18.12.0"
+    "@expo/downloader": "npm:19.0.0"
+    "@expo/eas-build-job": "npm:19.0.0"
     "@expo/env": "npm:^0.4.0"
-    "@expo/logger": "npm:18.5.0"
+    "@expo/logger": "npm:19.0.0"
     "@expo/package-manager": "npm:1.9.10"
     "@expo/plist": "npm:^0.2.0"
     "@expo/repack-app": "npm:~0.4.1"
     "@expo/results": "npm:^1.0.0"
     "@expo/spawn-async": "npm:1.7.2"
-    "@expo/steps": "npm:18.12.0"
-    "@expo/template-file": "npm:18.5.0"
-    "@expo/turtle-spawn": "npm:18.5.0"
+    "@expo/steps": "npm:19.0.0"
+    "@expo/template-file": "npm:19.0.0"
+    "@expo/turtle-spawn": "npm:19.0.0"
     "@expo/xcpretty": "npm:^4.3.1"
     "@google-cloud/storage": "npm:^7.11.2"
     "@sentry/node": "npm:7.77.0"
@@ -3096,7 +3096,7 @@ __metadata:
   languageName: node
   linkType: hard
 
-"@expo/downloader@npm:18.5.0, @expo/downloader@workspace:packages/downloader":
+"@expo/downloader@npm:19.0.0, @expo/downloader@workspace:packages/downloader":
   version: 0.0.0-use.local
   resolution: "@expo/downloader@workspace:packages/downloader"
   dependencies:
@@ -3112,11 +3112,13 @@ __metadata:
   languageName: unknown
   linkType: soft
 
-"@expo/eas-build-job@npm:18.12.0, @expo/eas-build-job@workspace:packages/eas-build-job":
+"@expo/eas-build-job@npm:19.0.0, @expo/eas-build-job@workspace:packages/eas-build-job":
   version: 0.0.0-use.local
   resolution: "@expo/eas-build-job@workspace:packages/eas-build-job"
   dependencies:
-    "@expo/logger": "npm:18.5.0"
+    "@expo/logger": "npm:19.0.0"
+    "@expo/results": "npm:1.0.0"
+    "@expo/turtle-spawn": "npm:19.0.0"
     "@types/jest": "npm:^29.5.12"
     "@types/node": "npm:20.14.2"
     jest: "npm:^29.7.0"
@@ -3129,12 +3131,12 @@ __metadata:
   languageName: unknown
   linkType: soft
 
-"@expo/eas-json@npm:18.12.0, @expo/eas-json@workspace:packages/eas-json":
+"@expo/eas-json@npm:19.0.0, @expo/eas-json@workspace:packages/eas-json":
   version: 0.0.0-use.local
   resolution: "@expo/eas-json@workspace:packages/eas-json"
   dependencies:
     "@babel/code-frame": "npm:7.23.5"
-    "@expo/eas-build-job": "npm:18.12.0"
+    "@expo/eas-build-job": "npm:19.0.0"
     "@tsconfig/node20": "npm:20.1.8"
     "@types/babel__code-frame": "npm:7.0.3"
     "@types/fs-extra": "npm:11.0.4"
@@ -3271,7 +3273,7 @@ __metadata:
   languageName: node
   linkType: hard
 
-"@expo/logger@npm:18.5.0, @expo/logger@workspace:packages/logger":
+"@expo/logger@npm:19.0.0, @expo/logger@workspace:packages/logger":
   version: 0.0.0-use.local
   resolution: "@expo/logger@workspace:packages/logger"
   dependencies:
@@ -3482,12 +3484,12 @@ __metadata:
   languageName: node
   linkType: hard
 
-"@expo/steps@npm:18.12.0, @expo/steps@workspace:packages/steps":
+"@expo/steps@npm:19.0.0, @expo/steps@workspace:packages/steps":
   version: 0.0.0-use.local
   resolution: "@expo/steps@workspace:packages/steps"
   dependencies:
-    "@expo/eas-build-job": "npm:18.12.0"
-    "@expo/logger": "npm:18.5.0"
+    "@expo/eas-build-job": "npm:19.0.0"
+    "@expo/logger": "npm:19.0.0"
     "@expo/spawn-async": "npm:^1.7.2"
     "@jest/globals": "npm:^29.7.0"
     "@types/jest": "npm:^29.5.12"
@@ -3512,7 +3514,7 @@ __metadata:
   languageName: unknown
   linkType: soft
 
-"@expo/template-file@npm:18.5.0, @expo/template-file@workspace:packages/template-file":
+"@expo/template-file@npm:19.0.0, @expo/template-file@workspace:packages/template-file":
   version: 0.0.0-use.local
   resolution: "@expo/template-file@workspace:packages/template-file"
   dependencies:
@@ -3535,11 +3537,11 @@ __metadata:
   languageName: node
   linkType: hard
 
-"@expo/turtle-spawn@npm:18.5.0, @expo/turtle-spawn@workspace:packages/turtle-spawn":
+"@expo/turtle-spawn@npm:19.0.0, @expo/turtle-spawn@workspace:packages/turtle-spawn":
   version: 0.0.0-use.local
   resolution: "@expo/turtle-spawn@workspace:packages/turtle-spawn"
   dependencies:
-    "@expo/logger": "npm:18.5.0"
+    "@expo/logger": "npm:19.0.0"
     "@expo/spawn-async": "npm:^1.7.2"
     "@types/jest": "npm:^29.5.12"
     "@types/node": "npm:20.14.2"
@@ -3555,18 +3557,18 @@ __metadata:
   resolution: "@expo/worker@workspace:packages/worker"
   dependencies:
     "@babel/core": "npm:7.24.7"
-    "@expo/build-tools": "npm:18.12.3"
+    "@expo/build-tools": "npm:19.0.0"
     "@expo/config-plugins": "npm:55.0.7"
     "@expo/config-types": "npm:55.0.5"
-    "@expo/downloader": "npm:18.5.0"
-    "@expo/eas-build-job": "npm:18.12.0"
-    "@expo/logger": "npm:18.5.0"
+    "@expo/downloader": "npm:19.0.0"
+    "@expo/eas-build-job": "npm:19.0.0"
+    "@expo/logger": "npm:19.0.0"
     "@expo/results": "npm:1.0.0"
     "@expo/rudder-sdk-node": "npm:1.1.1"
     "@expo/spawn-async": "npm:1.7.2"
-    "@expo/steps": "npm:18.12.0"
-    "@expo/template-file": "npm:18.5.0"
-    "@expo/turtle-spawn": "npm:18.5.0"
+    "@expo/steps": "npm:19.0.0"
+    "@expo/template-file": "npm:19.0.0"
+    "@expo/turtle-spawn": "npm:19.0.0"
     "@hapi/boom": "npm:10.0.1"
     "@types/babel__core": "npm:7.20.5"
     "@types/fs-extra": "npm:11.0.4"
@@ -7493,6 +7495,15 @@ __metadata:
   languageName: node
   linkType: hard
 
+"@types/debug@npm:4.1.13":
+  version: 4.1.13
+  resolution: "@types/debug@npm:4.1.13"
+  dependencies:
+    "@types/ms": "npm:*"
+  checksum: 10c0/e5e124021bbdb23a82727eee0a726ae0fc8a3ae1f57253cbcc47497f259afb357de7f6941375e773e1abbfa1604c1555b901a409d762ec2bb4c1612131d4afb7
+  languageName: node
+  linkType: hard
+
 "@types/diff@npm:6.0.0":
   version: 6.0.0
   resolution: "@types/diff@npm:6.0.0"
@@ -7835,6 +7846,13 @@ __metadata:
   languageName: node
   linkType: hard
 
+"@types/ms@npm:*":
+  version: 2.1.0
+  resolution: "@types/ms@npm:2.1.0"
+  checksum: 10c0/5ce692ffe1549e1b827d99ef8ff71187457e0eb44adbae38fdf7b9a74bae8d20642ee963c14516db1d35fa2652e65f47680fdf679dcbde52bbfadd021f497225
+  languageName: node
+  linkType: hard
+
 "@types/mute-stream@npm:^0.0.4":
   version: 0.0.4
   resolution: "@types/mute-stream@npm:0.0.4"
@@ -10330,7 +10348,7 @@ __metadata:
   resolution: "create-eas-build-function@workspace:packages/create-eas-build-function"
   dependencies:
     "@expo/package-manager": "npm:1.9.10"
-    "@expo/steps": "npm:18.12.0"
+    "@expo/steps": "npm:19.0.0"
     "@jest/globals": "npm:^29.7.0"
     "@types/jest": "npm:^29.5.12"
     "@types/node": "npm:20.14.2"
@@ -10541,6 +10559,18 @@ __metadata:
   languageName: node
   linkType: hard
 
+"debug@npm:4.4.3, debug@npm:^4.3.7, debug@npm:^4.4.0, debug@npm:^4.4.1, debug@npm:^4.4.3":
+  version: 4.4.3
+  resolution: "debug@npm:4.4.3"
+  dependencies:
+    ms: "npm:^2.1.3"
+  peerDependenciesMeta:
+    supports-color:
+      optional: true
+  checksum: 10c0/d79136ec6c83ecbefd0f6a5593da6a9c91ec4d7ddc4b54c883d6e71ec9accb5f67a1a5e96d00a328196b5b5c86d365e98d8a3a70856aaf16b4e7b1985e67f5a6
+  languageName: node
+  linkType: hard
+
 "debug@npm:^4.3.5":
   version: 4.3.7
   resolution: "debug@npm:4.3.7"
@@ -10553,18 +10583,6 @@ __metadata:
   languageName: node
   linkType: hard
 
-"debug@npm:^4.3.7, debug@npm:^4.4.0, debug@npm:^4.4.1, debug@npm:^4.4.3":
-  version: 4.4.3
-  resolution: "debug@npm:4.4.3"
-  dependencies:
-    ms: "npm:^2.1.3"
-  peerDependenciesMeta:
-    supports-color:
-      optional: true
-  checksum: 10c0/d79136ec6c83ecbefd0f6a5593da6a9c91ec4d7ddc4b54c883d6e71ec9accb5f67a1a5e96d00a328196b5b5c86d365e98d8a3a70856aaf16b4e7b1985e67f5a6
-  languageName: node
-  linkType: hard
-
 "decamelize-keys@npm:^1.1.0":
   version: 1.1.0
   resolution: "decamelize-keys@npm:1.1.0"
@@ -10943,11 +10961,11 @@ __metadata:
   version: 0.0.0-use.local
   resolution: "eas-cli-local-build-plugin@workspace:packages/local-build-plugin"
   dependencies:
-    "@expo/build-tools": "npm:18.12.3"
-    "@expo/eas-build-job": "npm:18.12.0"
-    "@expo/logger": "npm:18.5.0"
+    "@expo/build-tools": "npm:19.0.0"
+    "@expo/eas-build-job": "npm:19.0.0"
+    "@expo/logger": "npm:19.0.0"
     "@expo/spawn-async": "npm:^1.7.2"
-    "@expo/turtle-spawn": "npm:18.5.0"
+    "@expo/turtle-spawn": "npm:19.0.0"
     "@types/bunyan": "npm:^1.8.11"
     "@types/fs-extra": "npm:^11.0.4"
     "@types/hapi__joi": "npm:^17.1.14"
@@ -11001,11 +11019,11 @@ __metadata:
     "@expo/code-signing-certificates": "npm:0.0.5"
     "@expo/config": "npm:55.0.10"
     "@expo/config-plugins": "npm:55.0.7"
-    "@expo/eas-build-job": "npm:18.12.0"
-    "@expo/eas-json": "npm:18.12.0"
+    "@expo/eas-build-job": "npm:19.0.0"
+    "@expo/eas-json": "npm:19.0.0"
     "@expo/env": "npm:^1.0.0"
     "@expo/json-file": "npm:8.3.3"
-    "@expo/logger": "npm:18.5.0"
+    "@expo/logger": "npm:19.0.0"
     "@expo/multipart-body-parser": "npm:2.0.0"
     "@expo/osascript": "npm:2.1.4"
     "@expo/package-manager": "npm:1.9.10"
@@ -11017,7 +11035,7 @@ __metadata:
     "@expo/results": "npm:1.0.0"
     "@expo/rudder-sdk-node": "npm:1.1.1"
     "@expo/spawn-async": "npm:1.7.2"
-    "@expo/steps": "npm:18.12.0"
+    "@expo/steps": "npm:19.0.0"
     "@expo/timeago.js": "npm:1.0.0"
     "@graphql-codegen/cli": "npm:5.0.0"
     "@graphql-codegen/introspection": "npm:4.0.0"
@@ -11030,6 +11048,7 @@ __metadata:
     "@tsconfig/node20": "npm:20.1.8"
     "@types/cli-progress": "npm:3.11.5"
     "@types/dateformat": "npm:3.0.1"
+    "@types/debug": "npm:4.1.13"
     "@types/diff": "npm:6.0.0"
     "@types/envinfo": "npm:7.8.3"
     "@types/express": "npm:4.17.15"
@@ -11058,6 +11077,7 @@ __metadata:
     chalk: "npm:4.1.2"
     cli-progress: "npm:3.12.0"
     dateformat: "npm:4.6.3"
+    debug: "npm:4.4.3"
     diff: "npm:7.0.0"
     dotenv: "npm:16.3.1"
     env-paths: "npm:2.2.0"