Guide_Vita/docs/downgrading-firmware-(3.65).md

sidebar
false

Downgrading Firmware (3.65)

Required Reading

If your device was unable to downgrade to firmware version 3.60 due to its "factory firmware", you will still be able to use the more convenience Ensō boot-time exploit (as long as your "factory firmware" is 3.65 or lower) by downgrading to firmware version 3.65.

Unfortunately, you may experience minor software incompatibilities as you will not be able to use any homebrew which is only compatible with 3.60.

::: tip Ensure your device has a battery charge of 50% or greater before proceeding. :::

What You Need

• An FTP Client such as WinSCP or CyberDuck
  • Alternatively, you can also use the USB transfer feature of VitaShell
• - PSP2UPDAT.PUP (3.65) (mirror)

Section I - Prep Work

1. Exit the modoru application
2. Launch the VitaShell application
3. Press to open the VitaShell settings
4. Press on "SELECT button" to change the mode to "FTP"
   • Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
   • Note that the USB transfer mode will start you in the ux0 partition
   • Additionally, some files will be hidden in USB mode on Windows; you must enable "Show hidden files, folders, and drives" and disable "Hide protected operating system files" in the File Explorer options in order to see all files
5. Press to close the VitaShell settings
6. Press to enable FTP access on your device
7. Open your FTP client on your computer
8. Enter the IP Address and Port displayed on your device
9. Using your FTP client, navigate to ux0: -> data/
10. Delete the existing 3.60 PSP2UPDAT.PUP file
11. Transfer the 3.65 PSP2UPDAT.PUP to the data folder
12. Press on your device to close the FTP connection

Section II - Installing modoru

1. On your device, navigate to ux0: -> data/
2. Press on modoru.vpk to install it
3. Press to confirm the install
4. Press to continue the install when you are prompted about extended permissions
5. Press to open the menu, then select "Delete" to delete modoru.vpk
6. Press to confirm the deletion
7. Press on the 3.65 PSP2UPDAT.PUP to open the menu, then select "Copy"
8. Press to dismiss the copied file dialogue box
9. Press to return to the ux0: partition
10. Navigate to app -> MODORU000
11. Press on the existing 3.60 PSP2UPDAT.PUP to open the menu, then select "Delete"
12. Press to confirm the deletion
13. Press to open then menu, then select "Paste" to paste the 3.65 PSP2UPDAT.PUP in the current folder
14. Press to return to the ux0: partition
15. Press on tai to open the menu, then select "Delete" to delete the tai folder
16. Press to confirm the deletion
17. Close the VitaShell application

Section III - Downgrading

1. Reboot your device
2. Launch the h-encore application while holding
   • If prompted about trophies, continue holding and select "Yes"
3. If the exploit was successful, you will now see the h-encore bootstrap menu
   • If the exploit is stuck on a white screen, simply close the application (which will cause a crash and reboot your device), then try again
   • If it is still stuck, hold the power button down for over 30 seconds to force a reboot, then try again
4. Select "Install HENkaku"
5. Select "Exit"
6. Launch the modoru application
7. Press to confirm the downgrade to firmware version 3.65
8. Press to accept the terms and conditions
9. Your device will begin the downgrade process
10. Wait until the process is completed, your device will reboot automatically

::: tip Continue to Installing Ensō (3.65) :::