Guide_Vita/docs/updating-firmware-(3.60).md

sidebar
false

Updating Firmware (3.60)

Required Reading

The HENkaku exploit is only compatible with the firmware version 3.60. As a result, lower firmware versions must update using a custom update server in order to use that exploit.

Note that a custom update server can only update your device, not downgrade it. If you are on a firmware version higher than 3.60, you should return to Get Started.

What you need

• An internet connection on your PS Vita (TV)

Instructions

Section I: Prep Work

1. Launch the Settings application
2. Navigate to Network -> Wi-Fi Settings
   • Connect to a Wi-Fi network if you have not already done so
3. Select your current connection
   • This is signified by a green dot next to the network
4. Select "Advanced Settings"
5. Set "DNS Settings" to "Manual"
6. Set "Primary DNS" to 212.47.229.76
7. Leave "Secondary DNS" blank
8. Ensure "Proxy Server" is set to "Do Not Use"
9. Return to the main Settings menu

Section II: Updating to 3.60

1. Navigate to System Update -> Update Using Wi-Fi
2. Ensure the update message "3.60 (変革 Compatible)" is displayed
   • If it displays any other message, stop and figure out what went wrong
3. Follow the prompts to update your device to 3.60
   • When the process has completed, your device will reboot automatically

::: tip Continue to Installing HENkaku :::