mirror of
https://github.com/hacks-guide/Guide_Vita.git
synced 2024-11-26 19:20:30 +00:00
6009d9d7fa
There is a typo in the Updating Firmware (3.74) page where "3.68" is misspelled with a comma instead of a period. The firmware list on the Using Henlo page has also been updated to match the Updating Firmware page.
51 lines
2.2 KiB
Markdown
51 lines
2.2 KiB
Markdown
---
|
|
next: true
|
|
---
|
|
|
|
# Using HENlo
|
|
|
|
### Required Reading
|
|
|
|
The HENlo exploit chain for the PS Vita (TV) allows for the installation of homebrew applications to the LiveArea Screen. It is compatible with the firmware versions 3.65, 3.68, and 3.74.
|
|
|
|
Note that the HENlo chain is not "persistent" (meaning it does not remain installed after a reboot). Fortunately, this is only a temporary restriction until HENkaku Ensō is installed on the next page.
|
|
|
|
In addition to running HENlo, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the "administrator" mode on a computer.
|
|
|
|
The "VitaDeploy" application will also be installed to your home screen. VitaDeploy makes installing apps, plugins, and custom firmwares simple and includes many useful tools and utilites.
|
|
|
|
### What You Need
|
|
|
|
* An internet connection on your PS Vita (TV)
|
|
|
|
### Instructions
|
|
|
|
#### Section I - Launching HENlo
|
|
|
|
1. Launch the browser and go to the following URL on your device: `http://jailbreak.psp2.dev`
|
|
1. On the HENlo page, press `Unlock my Vita`, then press `Unlock`
|
|
+ If you get an error or cannot proceed, follow our [troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
|
|
1. If the exploit was successful, you should be greeted by a screen titled "henlo-bootstrap"
|
|
|
|
#### Section II - Installing HENkaku and VitaDeploy
|
|
|
|
::: danger
|
|
If you are on a first generation Vita without an official memory card, before reading this section create an internal memory partition by following [Creating an internal memory card](creating-an-internal-memory-card). Once created, you are free to come back to this part of the guide and follow it **from the start again**.
|
|
:::
|
|
|
|
1. Press <Btn btn="cross" /> on "Install henkaku" to enable homebrew
|
|
1. Press <Btn btn="cross" /> on "Install VitaDeploy"
|
|
1. Press <Btn btn="cross" /> on "Exit"
|
|
|
|
#### Section III - Configuring HENkaku
|
|
|
|
1. Launch the Settings application
|
|
1. Navigate to `HENkaku Settings`
|
|
1. Check "Enable Unsafe Homebrew"
|
|
1. Return to HENkaku Settings menu
|
|
1. Close the Settings application
|
|
|
|
::: tip
|
|
You can change your <Btn btn="circle" /> button behavior now. If you do, change it for the guide too: <BtnToggler />
|
|
:::
|