Guide_Vita/docs/installing-enso-(3.65).md

2.5 KiB

title sidebar
Installing Ensō (3.65) false

Required Reading

If your device on firmware version 3.65 was unable to downgrade to firmware version 3.60 due to its "factory firmware", you will fortunately still be able to use the more convenience Ensō boot-time exploit.

Unfortunately, you may experience minor software incompatibilities as you will not be able to use any homebrew which is only compatible with 3.60.

What You Need

  • An FTP Client such as WinSCP or CyberDuck
    • Alternatively, you can also use the USB transfer feature of VitaShell
  • The latest release of Ensō (3.65)

Instructions

Section I - Prep Work

  1. Launch the VitaShell application
  2. Press to open the VitaShell settings
  3. Press on "SELECT button" to change the mode to "FTP"
    • Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
    • Note that the USB transfer mode will start you in the ux0 partition
    • Additionally, some files will be hidden in USB mode on Windows; you must enable "Show hidden files, folders, and drives" and disable "Hide protected operating system files" in the File Explorer options in order to see all files
  4. Press to close the VitaShell settings
  5. Press to enable FTP access on your device
  6. Open your FTP client on your computer
  7. Enter the IP Address and Port displayed on your device
  8. Using your FTP client, navigate to ux0: -> data/
  9. Transfer enso.vpk to the data folder
  10. Press on your device to close the FTP connection

Section II - Installing VPK

  1. On your device, navigate to ux0: -> data/
  2. Press on enso.vpk to install the file
  3. Press to confirm the install
  4. Press to continue the install when you are prompted about extended permissions
  5. Press to open the menu, then select "Delete" to delete the marked file
  6. Press to confirm the deletion
  7. Close the VitaShell application

Section III - Installing Ensō

  1. Open the Ensō application
  2. Press to accept the terms
  3. Press to install Ensō
    • When the process has completed, press any button to reboot your device

::: tip Continue to Finalizing Setup (Legacy) :::