Ribbon improvements. Bugfix for the icon overlap while displaying help messages.

Update Hatari repository

CONTRIBUTING.md

@@ -35,6 +35,12 @@ Feature requests are great, but they usually end up lying around the issue
 tracker indefinitely. Sending a pull request is a much better way of getting a
 particular feature into OpenELEC.
 
+Please dont ask us to add 3rdparty drivers unless you are the maintainer/developer of the driver,
+we have no manpower to support a non-mainlined kernel driver for your hardware.
+However, OpenELEC comes with minimal set of kernel drivers enabled, if you are sure that your hardware
+is supported in mainline kernel, feel free to send us a Pull Request to enable it in our
+kernel defconfigs. We are always happy to support known-working hardware.
+
 ### Reporting build failures
 
 As buildsystem / core packages (toolchain) / random libraries change from time to time, it is required

README.md

@@ -1,8 +1,6 @@
 # Lakka - The DIY retro emulation console
 
-Lakka is a lightweight Linux distribution that transforms a credit card sized computer into a full blown emulation console.
-
-## Features
+Lakka is a lightweight Linux distribution that transforms a small computer into a full blown emulation console.
 
 * **Powerful** - Built on top of the famous RetroArch emulator, Lakka is able to emulate a large range of hardware and has some usefull features such as Braid-like rewinding, joypad hotplug and video streaming.
 * **User friendly** - Lakka is easy to setup and use. Once installed to your SD card, you just have to put your rom on the card, plug your joypad and enjoy your favorite old games.
@@ -11,10 +9,11 @@ Lakka is a lightweight Linux distribution that transforms a credit card sized co
 
 ## Installation instructions
 
-Please refer to our website http://www.lakka.tv/getlakka on how to setup Lakka.
+Please refer to our website http://www.lakka.tv/get on how to setup Lakka.
 
 ## Support
 
 * [FAQ](https://github.com/lakkatv/Lakka/wiki/FAQ)
 * #lakkatv on irc.freenode.org
+* [Forums](http://libretro.com/forums/forumdisplay.php?f=26)
 * contact@lakka.tv

config/addon/xbmc.python.module.xml

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <addon id="@PKG_ADDON_ID@"
-       name="@PKG_NAME@"
+       name="@ADDON_NAME@"
        version="@ADDON_VERSION@"
        provider-name="@PROVIDER_NAME@">
   <requires>
@@ -8,9 +8,7 @@
     <import addon="xbmc.python" version="2.1.0"/>
 @REQUIRES@
   </requires>
-  <extension point="@PKG_ADDON_TYPE@"
-             library="default.py">
-        <provides>executable</provides>
+  <extension point="xbmc.python.module" library="lib/">
   </extension>
   <extension point="xbmc.addon.metadata">
     <summary>@PKG_SHORTDESC@</summary>

config/addon/xbmc.python.script.xml

@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
+<addon id="@PKG_ADDON_ID@"
+       name="@ADDON_NAME@"
+       version="@ADDON_VERSION@"
+       provider-name="@PROVIDER_NAME@">
+  <requires>
+    <import addon="os.openelec.tv" version="@OS_VERSION@"/>
+    <import addon="xbmc.python" version="2.1.0"/>
+@REQUIRES@
+  </requires>
+  <extension point="xbmc.python.script" library="default.py">
+    <provides>executable</provides>
+  </extension>
+  <extension point="xbmc.addon.metadata">
+    <summary>@PKG_SHORTDESC@</summary>
+    <description>
+@PKG_LONGDESC@
+    </description>
+    <disclaimer>
+@PKG_DISCLAIMER@
+    </disclaimer>
+    <platform>all</platform>
+  </extension>
+</addon>

config/addon/xbmc.service.xml

@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
+<addon id="@PKG_ADDON_ID@"
+       name="@ADDON_NAME@"
+       version="@ADDON_VERSION@"
+       provider-name="@PROVIDER_NAME@">
+  <requires>
+    <import addon="os.openelec.tv" version="@OS_VERSION@"/>
+    <import addon="xbmc.python" version="2.1.0"/>
+@REQUIRES@
+  </requires>
+  <extension point="xbmc.service" library="default.py">
+    <provides>executable</provides>
+  </extension>
+  <extension point="xbmc.addon.metadata">
+    <summary>@PKG_SHORTDESC@</summary>
+    <description>
+@PKG_LONGDESC@
+    </description>
+    <disclaimer>
+@PKG_DISCLAIMER@
+    </disclaimer>
+    <platform>all</platform>
+  </extension>
+</addon>

config/arch.aarch64

@@ -0,0 +1,32 @@
+# determines TARGET_CPU, if not forced by user
+  if [ -z "$TARGET_CPU" ]; then
+    TARGET_CPU=generic
+  fi
+
+# TARGET_CPU:
+# cortex-a35 cortex-a53 cortex-a57 cortex-a72 exynos-m1
+# qdf24xx thunderx xgene1
+
+# TARGET_FPU:
+# This specifies what floating point hardware (or hardware emulation) is
+# available on the target. Permissible names are:
+# fpa fpe2 fpe3 maverick vfp vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16
+# vfpv3xd vfpv3xd-fp16 neon neon-fp16 vfpv4 vfpv4-d16 fpv4-sp-d16
+# neon-vfpv4.
+
+# determine architecture's family
+  case $TARGET_CPU in
+    *)
+      TARGET_SUBARCH=aarch64
+      TARGET_VARIANT=armv8-a
+      TARGET_CPU_FLAGS="+crc+crypto"
+      TARGET_EXTRA_FLAGS="-mcpu=$TARGET_CPU$TARGET_CPU_FLAGS"
+      TARGET_FPU=neon
+      SIMD_SUPPORT="yes"
+      ;;
+  esac
+
+# setup ARCH specific *FLAGS
+  TARGET_CFLAGS="-march=$TARGET_VARIANT $TARGET_EXTRA_FLAGS"
+  [ -n "$TARGET_FPU" ] && TARGET_CFLAGS="$TARGET_CFLAGS $TARGET_FPU_FLAGS"
+  TARGET_LDFLAGS="-march=$TARGET_VARIANT -mcpu=$TARGET_CPU$TARGET_CPU_FLAGS"

config/arch.arm

@@ -31,13 +31,10 @@
       TARGET_FPU_FLAGS="-mfloat-abi=$TARGET_FLOAT -mfpu=$TARGET_FPU"
       SIMD_SUPPORT="no"
       ;;
-    cortex-a7|cortex-a15)
-      TARGET_SUBARCH=armv7-a
+    cortex-a7|cortex-a15|cortex-a15.cortex-a7)
+      TARGET_SUBARCH=armv7ve
       TARGET_ABI=eabi
-      # It's not currently possible to specify the exact architecture variant (-mcpu)
-      # that A7/A15 supports in the command line so use -mtune here.
-      # see http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57907
-      TARGET_EXTRA_FLAGS="-mtune=$TARGET_CPU"
+      TARGET_EXTRA_FLAGS="-mcpu=$TARGET_CPU"
       TARGET_FPU_FLAGS="-mfloat-abi=$TARGET_FLOAT -mfpu=$TARGET_FPU"
       SIMD_SUPPORT="yes"
       ;;

config/functions

@@ -1,12 +1,9 @@
 setup_toolchain() {
-  if [ "$1" = "--optimize" ]; then
-    OPTIMIZE=yes
-    shift
-  fi
-
   if [ "$1" = target ]; then
     export DESTIMAGE="target"
 
+    unset CPP
+
     export CC=$TARGET_CC
     export CXX=$TARGET_CXX
     export LD=$TARGET_LD
@@ -31,6 +28,8 @@ setup_toolchain() {
   elif [ "$1" = host ]; then
     export DESTIMAGE="host"
 
+    unset CPP
+
     export AWK=$HOST_AWK
     export CC=$HOST_CC
     export CXX=$HOST_CXX
@@ -56,12 +55,22 @@ setup_toolchain() {
 }
 
 kernel_path() {
-  . $ROOT/packages/linux/package.mk
+  if [ -e $ROOT/projects/$PROJECT/packages/linux/package.mk ]; then
+    . $ROOT/projects/$PROJECT/packages/linux/package.mk
+  else
+    . $ROOT/packages/linux/package.mk
+  fi
+
   echo $ROOT/$BUILD/${PKG_NAME}-${PKG_VERSION}
 }
 
 kernel_version() {
-  . $ROOT/packages/linux/package.mk
+  if [ -e $ROOT/projects/$PROJECT/packages/linux/package.mk ]; then
+    . $ROOT/projects/$PROJECT/packages/linux/package.mk
+  else
+    . $ROOT/packages/linux/package.mk
+  fi
+
   echo ${PKG_VERSION}
 }
 
@@ -73,10 +82,16 @@ get_module_dir() {
 # get package's build dir
 get_build_dir() {
   if [ ! -z $1 ] ; then
-    local _PKG_DIR=$(find $ROOT/packages -name $1)
-    if [ -d $_PKG_DIR -a -f $_PKG_DIR/package.mk ] ; then
+    local _PKG_DIR=$(find $ROOT/projects/$PROJECT/packages -name $1 2>/dev/null)
+    if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
       . $_PKG_DIR/package.mk
+    else
+      local _PKG_DIR=$(find $ROOT/packages -name $1 2>/dev/null)
+      if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
+        . $_PKG_DIR/package.mk
+      fi
     fi
+
     echo $ROOT/$BUILD/${PKG_NAME}-${PKG_VERSION}
   fi
 }
@@ -170,14 +185,13 @@ do_autoreconf() {
 
 strip_lto() {
   # strip out LTO optimization from *FLAGS
-  CFLAGS=`echo $CFLAGS | sed -e "s|-flto||g"`
-  CXXFLAGS=`echo $CXXFLAGS | sed -e "s|-flto||g"`
-  LDFLAGS=`echo $LDFLAGS | sed -e "s|-flto||g"`
-}
-
-strip_linker_plugin() {
-  # strip out usage from linker plugin
-  LDFLAGS=`echo $LDFLAGS | sed -e "s|-fuse-linker-plugin||g"`
+  if [ -n "$GCC_OPTIM_LTO" ] ; then
+    CFLAGS=`echo $CFLAGS | sed -e "s|$GCC_OPTIM_LTO||g"`
+    CXXFLAGS=`echo $CXXFLAGS | sed -e "s|$GCC_OPTIM_LTO||g"`
+  fi
+  if [ -n "$LD_OPTIM_LTO" ] ; then
+    LDFLAGS=`echo $LDFLAGS | sed -e "s|$LD_OPTIM_LTO||g"`
+  fi
 }
 
 strip_gold() {
@@ -263,6 +277,9 @@ dashes="==========================="
 }
 
 show_config() {
+  # load graphic configuration
+    get_graphicdrivers
+
   dashes="==========================="
   config_message="$config_message\n $dashes$dashes$dashes"
   config_message="$config_message\n Configuration for $DISTRONAME ($([ "$OFFICIAL" = "yes" ] && echo "official" || echo "unofficial"))"
@@ -290,24 +307,24 @@ show_config() {
   config_message="$config_message\n\n Graphic configuration:"
   config_message="$config_message\n $dashes$dashes"
 
-  config_message="$config_message\n - XORG support:\t\t\t $XORG_SUPPORT"
-  config_message="$config_message\n - XORG Composite support:\t\t $COMPOSITE_SUPPORT"
-  config_message="$config_message\n - XORG Xinerama support:\t\t $XINERAMA_SUPPORT"
+  if [ "$DISPLAYSERVER" = "x11" ] ; then
+    config_message="$config_message\n - Xorg Graphic Drivers:\t\t $GRAPHIC_DRIVERS"
+    config_message="$config_message\n - XORG Composite support:\t\t $COMPOSITE_SUPPORT"
+    config_message="$config_message\n - WindowManager:\t\t\t $WINDOWMANAGER"
+  fi
   config_message="$config_message\n - SDL support:\t\t\t\t $SDL_SUPPORT"
   config_message="$config_message\n - OpenGL (GLX) support (provider):\t $OPENGL_SUPPORT ($OPENGL)"
   config_message="$config_message\n - OpenGLES support (provider):\t\t $OPENGLES_SUPPORT ($OPENGLES)"
-  config_message="$config_message\n - WindowManager:\t\t\t $WINDOWMANAGER"
-  config_message="$config_message\n - Xorg Graphic Drivers:\t\t $GRAPHIC_DRIVERS"
+  config_message="$config_message\n - uvesafb support:\t\t\t $UVESAFB_SUPPORT"
 
   # Hardware decoder support
 
   config_message="$config_message\n\n Hardware decoder configuration:"
   config_message="$config_message\n $dashes$dashes"
 
-  config_message="$config_message\n - Broadcom CrystalHD Decoder:\t\t $CRYSTALHD"
-  config_message="$config_message\n - XBMC Player driver:\t\t\t $XBMCPLAYER_DRIVER"
-  config_message="$config_message\n - VAAPI Support:\t\t\t $VAAPI"
-  config_message="$config_message\n - VDPAU Support:\t\t\t $VDPAU"
+  config_message="$config_message\n - Kodi Player driver:\t\t\t $KODIPLAYER_DRIVER"
+  config_message="$config_message\n - VAAPI Support:\t\t\t $VAAPI_SUPPORT"
+  config_message="$config_message\n - VDPAU Support:\t\t\t $VDPAU_SUPPORT"
 
   # Input device configuration
 
@@ -318,7 +335,7 @@ show_config() {
   config_message="$config_message\n - ATV Remote support:\t\t\t $ATVCLIENT_SUPPORT"
   config_message="$config_message\n - CEC Adapter support:\t\t\t $CEC_SUPPORT"
   config_message="$config_message\n - IRTrans support:\t\t\t $IRSERVER_SUPPORT"
-  config_message="$config_message\n - XBMC Joystick support:\t\t $JOYSTICK_SUPPORT"
+  config_message="$config_message\n - Kodi Joystick support:\t\t $JOYSTICK_SUPPORT"
 
   # Misc. hardware configuration
 
@@ -326,10 +343,7 @@ show_config() {
   config_message="$config_message\n $dashes$dashes"
 
   config_message="$config_message\n - ALSA support:\t\t\t $ALSA_SUPPORT"
-  config_message="$config_message\n - Pulseaudio support:\t\t\t $PULSEAUDIO_SUPPORT"
-  config_message="$config_message\n - Blu-Ray support:\t\t\t $BLURAY_SUPPORT"
   config_message="$config_message\n - Bluetooth support:\t\t\t $BLUETOOTH_SUPPORT"
-  config_message="$config_message\n - Hardware Sensors support:\t\t $SENSOR_SUPPORT"
   config_message="$config_message\n - LCD drivers:\t\t\t\t $LCD_DRIVER"
 
   for config_driver in $ADDITIONAL_DRIVERS; do
@@ -340,22 +354,20 @@ show_config() {
     config_message="$config_message\n - Include firmware:\t\t\t $config_firmware"
   done
 
+  for config_modules in $INITRAMFS_MODULES; do
+    config_message="$config_message\n - Initramfs modules:\t\t\t $config_modules"
+  done
+
   # Network service configuration
 
   config_message="$config_message\n\n Network service configuration:"
   config_message="$config_message\n $dashes$dashes"
 
   config_message="$config_message\n - Avahi (Zeroconf) support:\t\t $AVAHI_DAEMON"
+  config_message="$config_message\n - NFS mounting support:\t\t $NFS_SUPPORT"
+  config_message="$config_message\n - SAMBA mounting support:\t\t $SAMBA_SUPPORT"
   config_message="$config_message\n - SAMBA server support:\t\t $SAMBA_SERVER"
   config_message="$config_message\n - SFTP server support:\t\t\t $SFTP_SERVER"
-  config_message="$config_message\n - PPTP support:\t\t\t $PPTP_SUPPORT"
-  config_message="$config_message\n - OpenVPN support:\t\t\t $OPENVPN_SUPPORT"
-  config_message="$config_message\n - XBMC Airplay support:\t\t $AIRPLAY_SUPPORT"
-  config_message="$config_message\n - XBMC Airtunes support:\t\t $AIRTUNES_SUPPORT"
-  config_message="$config_message\n - XBMC AFP support:\t\t\t $AFP_SUPPORT"
-  config_message="$config_message\n - XBMC NFS support:\t\t\t $NFS_SUPPORT"
-  config_message="$config_message\n - XBMC SAMBA client support:\t\t $SAMBA_SUPPORT"
-  config_message="$config_message\n - XBMC Webserver support:\t\t $WEBSERVER"
 
   # OS configuration
 
@@ -365,10 +377,10 @@ show_config() {
   config_message="$config_message\n - OEM Support:\t\t\t\t $OEM_SUPPORT"
   config_message="$config_message\n - Default ROOT Password:\t\t $ROOT_PASSWORD"
   config_message="$config_message\n - Bootloader:\t\t\t\t $BOOTLOADER"
-if [ "$BOOTLOADER" = "u-boot" ]; then
-  config_message="$config_message\n - U-Boot configuration:\t\t $UBOOT_CONFIG"
-  config_message="$config_message\n - U-Boot config file:\t\t\t $UBOOT_CONFIGFILE"
-fi
+  if [ "$BOOTLOADER" = "u-boot" ]; then
+    config_message="$config_message\n   - U-Boot configuration:\t\t $UBOOT_CONFIG"
+    config_message="$config_message\n   - U-Boot config file:\t\t $UBOOT_CONFIGFILE"
+  fi
   config_message="$config_message\n - UDevil support:\t\t\t $UDEVIL"
   config_message="$config_message\n - Installer support:\t\t\t $INSTALLER_SUPPORT"
 
@@ -378,31 +390,46 @@ fi
   config_message="$config_message\n $dashes$dashes"
 
   config_message="$config_message\n - Swap Support:\t\t\t $SWAP_SUPPORT"
-if [ "$SWAP_SUPPORT" = "yes" ]; then
-  config_message="$config_message\n - Swapfile default size:\t\t $SWAPFILESIZE"
-fi
+  if [ "$SWAP_SUPPORT" = "yes" ]; then
+    config_message="$config_message\n   - Swapfile default size:\t\t $SWAPFILESIZE"
+  fi
   config_message="$config_message\n - exFAT Support (via Fuse):\t\t $EXFAT"
   config_message="$config_message\n - NTFS Support (via Fuse):\t\t $NTFS3G"
   config_message="$config_message\n - Install HFS Tools:\t\t\t $HFSTOOLS"
 
-  # XBMC configuration
+  # Kodi configuration
 
-  config_message="$config_message\n\n XBMC configuration:"
+  config_message="$config_message\n\n Kodi configuration:"
   config_message="$config_message\n $dashes$dashes"
 
-  config_message="$config_message\n - XBMC version:\t\t\t $MEDIACENTER"
-  config_message="$config_message\n - XBMC nonfree support:\t\t $NONFREE_SUPPORT"
-  config_message="$config_message\n - XBMC DVDCSS support:\t\t\t $DVDCSS_SUPPORT"
+  config_message="$config_message\n - Kodi version:\t\t\t $MEDIACENTER"
+  config_message="$config_message\n - Kodi nonfree support:\t\t $KODI_NONFREE_SUPPORT"
+  config_message="$config_message\n - Kodi Blu-Ray support:\t\t $KODI_BLURAY_SUPPORT"
+  if [ "$KODI_BLURAY_SUPPORT" = "yes" ] ; then
+    config_message="$config_message\n   - Bluray BD+ support:\t\t $BLURAY_BDPLUS_SUPPORT"
+    config_message="$config_message\n   - Bluray AACS support:\t\t $BLURAY_AACS_SUPPORT"
+  fi
+  config_message="$config_message\n - Kodi DVDCSS support:\t\t\t $KODI_DVDCSS_SUPPORT"
+  config_message="$config_message\n - Kodi Airplay support:\t\t $KODI_AIRPLAY_SUPPORT"
+  config_message="$config_message\n - Kodi Airtunes support:\t\t $KODI_AIRTUNES_SUPPORT"
+  config_message="$config_message\n - Kodi NFS support:\t\t\t $KODI_NFS_SUPPORT"
+  config_message="$config_message\n - Kodi MySQL support:\t\t\t $KODI_MYSQL_SUPPORT"
+  config_message="$config_message\n - Kodi Optical Drive support:\t\t $KODI_OPTICAL_SUPPORT"
+  config_message="$config_message\n - Kodi SAMBA client support:\t\t $KODI_SAMBA_SUPPORT"
+  config_message="$config_message\n - Kodi SSH client support:\t\t $KODI_SSHLIB_SUPPORT"
+  config_message="$config_message\n - Kodi UPNP support:\t\t\t $KODI_UPNP_SUPPORT"
+  config_message="$config_message\n - Kodi Webserver support:\t\t $KODI_WEBSERVER_SUPPORT"
+
 
   for config_skin in $SKINS; do
     config_message="$config_message\n - Include Skin:\t\t\t $config_skin"
   done
 
   config_message="$config_message\n - Default Skin:\t\t\t $SKIN_DEFAULT"
-  config_message="$config_message\n - Include extra fonts:\t\t\t $XBMC_EXTRA_FONTS"
-  config_message="$config_message\n - Include RSXS Screensaver:\t\t $XBMC_SCR_RSXS"
-  config_message="$config_message\n - Include ProjectM Visualization:\t $XBMC_VIS_PROJECTM"
-  config_message="$config_message\n - Include Goom Visualization:\t\t $XBMC_VIS_GOOM"
+  config_message="$config_message\n - Include extra fonts:\t\t\t $KODI_EXTRA_FONTS"
+  config_message="$config_message\n - Include RSXS Screensaver:\t\t $KODI_SCR_RSXS"
+  config_message="$config_message\n - Include ProjectM Visualization:\t $KODI_VIS_PROJECTM"
+  config_message="$config_message\n - Include Goom Visualization:\t\t $KODI_VIS_GOOM"
 
   config_message="$config_message\n"
   config_message="$config_message\n $dashes$dashes$dashes"
@@ -410,5 +437,5 @@ fi
   config_message="$config_message\n $dashes$dashes$dashes"
   config_message="$config_message\n\n\n"
 
-  echo -e $config_message
+  echo -e "$config_message"
 }

config/graphic

@@ -21,33 +21,29 @@ if [ "$SDL_SUPPORT" = no ]; then
 fi
 
 if [ "$OPENGL_SUPPORT" = no ]; then
-  XBMC_SCR_RSXS="no"
-  XBMC_VIS_PROJECTM="no"
-  XBMC_VIS_GOOM="no"
+  KODI_SCR_RSXS="no"
+  KODI_VIS_PROJECTM="no"
+  KODI_VIS_GOOM="no"
 fi
 
 get_graphicdrivers() {
   if [ "$GRAPHIC_DRIVERS" = "all" ]; then
-    GRAPHIC_DRIVERS="i915 i965 r200 r300 r600 nvidia vmware virtualbox"
+    GRAPHIC_DRIVERS="i915 i965 r200 r300 r600 nvidia"
   fi
 
   for drv in $GRAPHIC_DRIVERS; do
-    if [ "$drv" = "dove" ]; then
-      XORG_DRIVERS="$XORG_DRIVERS dove"
-    fi
-
     if [ "$drv" = "i915" ]; then
       DRI_DRIVERS="$DRI_DRIVERS,i915"
       XORG_DRIVERS="$XORG_DRIVERS intel"
       COMPOSITE_SUPPORT="yes"
-      LIBVA="$LIBVA libva-driver-intel"
+      VAAPI_SUPPORT="yes"
     fi
 
     if [ "$drv" = "i965" ]; then
       DRI_DRIVERS="$DRI_DRIVERS,i965"
       XORG_DRIVERS="$XORG_DRIVERS intel"
       COMPOSITE_SUPPORT="yes"
-      LIBVA="$LIBVA libva-driver-intel"
+      VAAPI_SUPPORT="yes"
     fi
 
     if [ "$drv" = "nouveau" ]; then
@@ -58,20 +54,16 @@ get_graphicdrivers() {
       GALLIUM_DRIVERS="$GALLIUM_DRIVERS,nouveau"
       XORG_DRIVERS="$XORG_DRIVERS nouveau"
       COMPOSITE_SUPPORT="yes"
-#      LLVM_SUPPORT="yes"
     fi
 
     if [ "$drv" = "nvidia" ]; then
       XORG_DRIVERS="$XORG_DRIVERS nvidia"
+      VDPAU_SUPPORT="yes"
     fi
 
     if [ "$drv" = "nvidia-legacy" ]; then
       XORG_DRIVERS="$XORG_DRIVERS nvidia-legacy"
-    fi
-
-    if [ "$drv" = "virtualbox" ]; then
-      DRI_DRIVERS="$DRI_DRIVERS,swrast"
-      XORG_DRIVERS="$XORG_DRIVERS virtualbox"
+      VDPAU_SUPPORT="yes"
     fi
 
     if [ "$drv" = "r200" ]; then
@@ -85,6 +77,7 @@ get_graphicdrivers() {
       XORG_DRIVERS="$XORG_DRIVERS ati"
       LLVM_SUPPORT="yes"
       COMPOSITE_SUPPORT="yes"
+      VDPAU_SUPPORT="yes"
     fi
 
     if [ "$drv" = "r600" ]; then
@@ -92,6 +85,7 @@ get_graphicdrivers() {
       XORG_DRIVERS="$XORG_DRIVERS ati"
       LLVM_SUPPORT="yes"
       COMPOSITE_SUPPORT="yes"
+      VDPAU_SUPPORT="yes"
     fi
 
     if [ "$drv" = "radeonsi" ]; then
@@ -99,13 +93,7 @@ get_graphicdrivers() {
       XORG_DRIVERS="$XORG_DRIVERS ati"
       LLVM_SUPPORT="yes"
       COMPOSITE_SUPPORT="yes"
-    fi
-
-    if [ "$drv" = "vmware" ]; then
-      DRI_DRIVERS="$DRI_DRIVERS,swrast"
-      GALLIUM_DRIVERS="$GALLIUM_DRIVERS,svga"
-      XORG_DRIVERS="$XORG_DRIVERS vmware"
-#      LLVM_SUPPORT="yes"
+      VDPAU_SUPPORT="yes"
     fi
 
   done

config/issue

@@ -1 +1 @@
-Welcome to OpenELEC - the powerful Mediacenter4you
+Lakka - The DIY retro emulation console

config/noobs/os.json

@@ -1,7 +1,10 @@
 {
-  "name": "@DISTRONAME@",
+  "name": "@DISTRONAME@_@PROJECT@",
   "version": "@OPENELEC_VERSION@",
   "release_date": "@RELEASE_DATE@",
   "kernel": "@KERNEL_VERSION@",
-  "description": "@DESCRIPTION@"
+  "description": "@DESCRIPTION@",
+  "username": "root",
+  "password": "@ROOT_PASSWORD@",
+  "supported_hex_revisions": "@NOOBS_HEX@"
 }

config/noobs/partitions.json

@@ -1,15 +1,15 @@
 {
   "partitions": [
     {
-      "label":                     "System",
+      "label":                     "@DISTRONAME@_@PROJECT@_System",
       "filesystem_type":           "FAT",
-      "partition_size_nominal":    128,
+      "partition_size_nominal":    200,
       "want_maximised":            false,
-      "uncompressed_tarball_size": 110,
+      "uncompressed_tarball_size": 170,
       "mkfs_options":              ""
     },
     {
-      "label":                     "Storage",
+      "label":                     "@DISTRONAME@_@PROJECT@_Storage",
       "filesystem_type":           "ext4",
       "partition_size_nominal":    864,
       "want_maximised":            true,

config/noobs/slides_src/D.svg

@@ -452,7 +452,7 @@ hCHKXQk7K9saByvnHQxUtj4O8Ofzv0U52nazcrnNJuVSm43KDXcblPPv1+MnrFMm7h/xA77Hd8qS
          sodipodi:role="line"
          x="512"
          y="958.36218"
-         id="tspan3140">Lakka will appear in you home network</tspan><tspan
+         id="tspan3140">Lakka will appear in your home network</tspan><tspan
          sodipodi:role="line"
          x="512"
          y="1008.3622"

config/optimize

@@ -4,17 +4,17 @@ if [ "$OPTIMIZATIONS" = normal ];then
 fi
 
 if [ "$OPTIMIZATIONS" = size ];then
-  GCC_OPTIM="-Os -fexcess-precision=fast -ffast-math"
+  GCC_OPTIM="-Os -fexcess-precision=fast"
   LD_OPTIM="-Wl,--as-needed"
 fi
 
 if [ "$LTO_SUPPORT" = yes ];then
-  GCC_OPTIM="$GCC_OPTIM -flto"
-  LD_OPTIM="$LD_OPTIM -fuse-linker-plugin -flto"
+  GCC_OPTIM_LTO="-flto -ffat-lto-objects"
+  LD_OPTIM_LTO="-fuse-linker-plugin -flto"
 fi
 
 if [ "$GOLD_SUPPORT" = yes ];then
-  LD_OPTIM="$LD_OPTIM -fuse-ld=gold"
+  LD_OPTIM_GOLD="-fuse-ld=gold"
 fi
 
 if [ "$DEBUG" = yes ]; then
@@ -28,9 +28,9 @@ else
 fi
 
 TARGET_CPPFLAGS=
-TARGET_CFLAGS="$TARGET_CFLAGS -Wall -pipe $GCC_OPTIM $PROJECT_CFLAGS"
+TARGET_CFLAGS="$TARGET_CFLAGS -Wall -pipe $GCC_OPTIM $GCC_OPTIM_LTO $PROJECT_CFLAGS"
 TARGET_CXXFLAGS="$TARGET_CFLAGS"
-TARGET_LDFLAGS="$TARGET_LDFLAGS $LD_OPTIM $GCC_OPTIM"
+TARGET_LDFLAGS="$TARGET_LDFLAGS $LD_OPTIM $LD_OPTIM_GOLD $LD_OPTIM_LTO"
 TARGET_LIBDIR="$SYSROOT_PREFIX/lib $SYSROOT_PREFIX/usr/lib"
 TARGET_INCDIR="$SYSROOT_PREFIX/include $SYSROOT_PREFIX/usr/include"
 

config/options

@@ -1,6 +1,14 @@
 # set default language for buildsystem
   export LC_ALL=C
 
+# determines DISTRO, if not forced by user
+# default is OpenELEC
+if [ -z "$DISTRO" ]; then
+  DISTRO="OpenELEC"
+else
+  DISTRO="$DISTRO"
+fi
+
 # determines PROJECT, if not forced by user
 # default is Generic
 if [ -z "$PROJECT" ]; then
@@ -18,23 +26,28 @@ else
 fi
 
 ROOT=`pwd`
+DISTRO_DIR="$ROOT/distributions"
 PROJECT_DIR="$ROOT/projects"
 LINUX_DEPENDS="$PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf $ROOT/packages/linux/package.mk"
 
 # include versioning
   . config/version
 
+# read distro versioning if available
+ if [ -f "$DISTRO_DIR/$DISTRO/version" ]; then
+   . $DISTRO_DIR/$DISTRO/version
+ fi
+
+# read distro options if available
+ if [ -f "$DISTRO_DIR/$DISTRO/options" ]; then
+   . $DISTRO_DIR/$DISTRO/options
+ fi
+
 # read project options if available
  if [ -f "$PROJECT_DIR/$PROJECT/options" ]; then
    . $PROJECT_DIR/$PROJECT/options
  fi
 
-# Target system library C (eglibc)
-  TARGET_LIBC="eglibc"
-
-# Library strip
-  LIBSTRIP="yes"
-
 # Need to point to your actual cc
 # If you have ccache installed, take care that LOCAL_CC don't point to it
   LOCAL_CC=`which gcc`
@@ -52,7 +65,9 @@ LINUX_DEPENDS="$PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf $ROOT/package
 # Concurrency make level (-j option)
 #  Try value 1 (default) to 4 on single CPU computer, or more on
 #  multi-processor computer (like hyperthreading SMP CPU)
-  CONCURRENCY_MAKE_LEVEL=`cat /proc/cpuinfo | grep -c '^processor[[:cntrl:]]*:'`
+  if test -z "${CONCURRENCY_MAKE_LEVEL}"; then
+    CONCURRENCY_MAKE_LEVEL=`cat /proc/cpuinfo | grep -c '^processor[[:cntrl:]]*:'`
+  fi
 
 # cache size for ccache
 # Set the maximum size of the files stored in the cache. You can specify a
@@ -77,5 +92,10 @@ LINUX_DEPENDS="$PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf $ROOT/package
     . $HOME/.openelec/$PROJECT/options
   fi
 
+# read distro options from $HOME if available
+  if [ -f "$HOME/.openelec/options.$DISTRO" ]; then
+    . $HOME/.openelec/options.$DISTRO
+  fi
+
 . config/graphic
 . config/path $1

config/path

@@ -20,6 +20,10 @@ HOST_NAME=`$LOCAL_CC -dumpmachine`
 TARGET_NAME=$(echo $TARGET_SUBARCH | sed -e "s,-,,")-openelec-linux-gnu${TARGET_ABI}
 
 BUILD=$BUILD_BASE.$DISTRONAME-$PROJECT.$TARGET_ARCH-$OPENELEC_VERSION
+if [ -n "$BUILD_SUFFIX" ]; then
+  BUILD=$BUILD-$BUILD_SUFFIX
+fi
+
 TARGET_IMG=$ROOT/$TARGET
 TARGET_ADDONS="$TARGET_IMG/$ADDONS/$ADDON_PATH"
 ADDON_BUILD="$BUILD/$ADDONS/$1"
@@ -64,26 +68,46 @@ SED="sed -i"
   PKG_IS_ADDON="no"
 
   if [ -n "$1" ]; then
-    FOUND=0
-    for DIR in $ROOT/`find $PACKAGES -type d -name $(echo $1| awk -F : '{print $1}') ! -wholename \*\/source\/\* 2>/dev/null` ; do
-      # keep track of dirs with meta for debugging
-      if [ -z "$ALL_DIRS" ] ; then
-        ALL_DIRS="$DIR"
-      else
-        ALL_DIRS="$ALL_DIRS\\n$DIR"
-      fi
-      if [ -f "$DIR/package.mk" ] ; then
-        FOUND=$((FOUND+1))
-        # found first. set $PKG_DIR
+    _PKG_ROOT_NAME=$(echo $1 | cut -d: -f1)
+    _ALL_DIRS=""
+    _FOUND=0
+    PKG_DIR=""
+
+    # first check project folder for a package
+    for DIR in $(find $ROOT/projects/$PROJECT/packages -type d -name $_PKG_ROOT_NAME 2>/dev/null); do
+      if [ -r "$DIR/package.mk" ]; then
+        # found first, set $PKG_DIR
         PKG_DIR="$DIR"
-        if [ $FOUND -gt 1 ] ; then
-          # found more ? fail
+        # keep track of dirs with package.mk for detecting multiple folders
+        _ALL_DIRS="${_ALL_DIRS}${DIR}\\n"
+        _FOUND=$((_FOUND+1))
+        if [ $_FOUND -gt 1 ]; then
+          # _FOUND more ? fail
           echo "Error - multiple package folders:"
-          echo -e "$ALL_DIRS"
+          echo -e "$_ALL_DIRS"
           exit 1
         fi
       fi
     done
+
+    # then check packages folder if not found already
+    if [ $_FOUND -eq 0 ]; then
+      for DIR in $(find $ROOT/$PACKAGES -type d -name $_PKG_ROOT_NAME 2>/dev/null); do
+        if [ -r "$DIR/package.mk" ]; then
+          # found first, set $PKG_DIR
+          PKG_DIR="$DIR"
+          # keep track of dirs with package.mk for detecting multiple folders
+          _ALL_DIRS="${_ALL_DIRS}${DIR}\\n"
+          _FOUND=$((_FOUND+1))
+          if [ $_FOUND -gt 1 ]; then
+            # found more ? fail
+            echo "Error - multiple package folders:"
+            echo -e "$_ALL_DIRS"
+            exit 1
+          fi
+        fi
+      done
+    fi
   fi
 
   if [ -r $PKG_DIR/package.mk ]; then
@@ -108,6 +132,8 @@ SSL_CERTIFICATES="/etc/pki/tls"
 TOOLCHAIN_LANGUAGES=c
 [ "$TOOLCHAIN_CXX" = yes ] && TOOLCHAIN_LANGUAGES=${TOOLCHAIN_LANGUAGES},c++
 
+unset TARGET_CPP
+
 TARGET_CC=${TARGET_PREFIX}gcc
 TARGET_CXX=${TARGET_PREFIX}g++
 TARGET_LD=${TARGET_PREFIX}ld
@@ -125,6 +151,8 @@ TARGET_PKG_CONFIG_PATH=""
 TARGET_PKG_CONFIG_LIBDIR="$SYSROOT_PREFIX/usr/lib/pkgconfig:$SYSROOT_PREFIX/usr/share/pkgconfig"
 TARGET_PKG_CONFIG_SYSROOT_DIR="$SYSROOT_PREFIX"
 
+unset HOST_CPP
+
 HOST_AWK=gawk
 HOST_CC=$ROOT/$TOOLCHAIN/bin/host-gcc
 HOST_CXX=$ROOT/$TOOLCHAIN/bin/host-g++

config/version

@@ -2,8 +2,8 @@
   OPENELEC_VERSION="devel"
 
 # OS_VERSION: OS Version
-  OS_VERSION="4.0"
+  OS_VERSION="5.0"
 
 # ADDON_VERSION: Addon version
-  ADDON_VERSION="4.1"
+  ADDON_VERSION="4.3"
 

distributions/Lakka/options

@@ -0,0 +1,243 @@
+# Name of the Distro to build (full name, without special characters)
+  DISTRONAME="Lakka"
+
+# short project description
+  DESCRIPTION="The DIY retro emulation console"
+
+# Welcome Message for e.g. SSH Server (up to 5 Lines)
+  GREETING0="###########################################"
+  GREETING1="# Lakka - The DIY retro emulation console #"
+  GREETING2="# ...... visit http://www.lakka.tv ...... #"
+  GREETING3="###########################################"
+  GREETING4=""
+
+# Root password to integrate in the target system
+  ROOT_PASSWORD="root"
+
+# Mediacenter to use (kodi / no)
+  MEDIACENTER="no"
+
+# Skins to install (Confluence)
+# Space separated list is supported,
+# e.g. SKINS="Confluence"
+  SKINS="Confluence"
+
+# Default Skin (Confluence)
+  SKIN_DEFAULT="Confluence"
+
+# install extra subtitle Fonts for KODI (yes / no)
+  KODI_EXTRA_FONTS="yes"
+
+# build and install 'RSXS' Screensaver (yes / no)
+  KODI_SCR_RSXS="yes"
+
+# build and install 'ProjectM' Visualization (yes / no)
+  KODI_VIS_PROJECTM="yes"
+
+# build and install 'GOOM' Visualization (yes / no)
+  KODI_VIS_GOOM="yes"
+
+# build and install 'Waveform' Visualization (yes / no)
+  KODI_VIS_WAVEFORM="yes"
+
+# build and install 'Spectrum' Visualization (yes / no)
+  KODI_VIS_SPECTRUM="yes"
+
+# build and install 'FishBMC' Visualization (yes / no)
+  # does not work on RPi
+  KODI_VIS_FISHBMC="yes"
+
+# build and install PulseAudio support (yes / no)
+  PULSEAUDIO_SUPPORT="no"
+
+# build and install espeak support (yes / no)
+  ESPEAK_SUPPORT="yes"
+
+# build and install with non-free support
+# (RAR compression support in KODI) (yes / no)
+  KODI_NONFREE_SUPPORT="yes"
+
+# build and install with BluRay support (yes / no)
+  KODI_BLURAY_SUPPORT="yes"
+
+# build and install with BD+ support
+# (BD+ decryption support in KODI) (yes / no)
+  BLURAY_BDPLUS_SUPPORT="yes"
+
+# build and install with AACS support
+# (BD decryption support in KODI) (yes / no)
+  BLURAY_AACS_SUPPORT="yes"
+
+# build and install with DVDCSS support
+# (DVD decryption support in KODI) (yes / no)
+  KODI_DVDCSS_SUPPORT="yes"
+
+# additional drivers to install:
+# for a list of additinoal drivers see packages/linux-drivers
+# Space separated list is supported,
+# e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"
+  ADDITIONAL_DRIVERS="RTL8192CU RTL8192DU RTL8188EU RTL8812AU"
+
+# build and install bluetooth support (yes / no)
+  BLUETOOTH_SUPPORT="yes"
+
+# build and install with KODI webfrontend (yes / no)
+  KODI_WEBSERVER_SUPPORT="yes"
+
+# build and install Avahi (Zeroconf) daemon (yes / no)
+  AVAHI_DAEMON="yes"
+
+# build with UPnP support (yes / no)
+  KODI_UPNP_SUPPORT="yes"
+
+# build with MySQL support (yes / no)
+  KODI_MYSQL_SUPPORT="yes"
+
+# build xbmc with sshlib support (yes / no)
+  KODI_SSHLIB_SUPPORT="yes"
+
+# build xbmc with optical drive support (yes / no)
+  KODI_OPTICAL_SUPPORT="yes"
+
+# KODI Audio encoders for usage with optical drive support
+# Space separated list is supported,
+# e.g. KODI_AUDIOENCODER_ADDONS="ENCODER1 ENCODER2"
+  KODI_AUDIOENCODER_ADDONS="flac lame vorbis wav"
+
+# build with AirPlay support (stream videos from iDevices to KODI) (yes / no)
+  KODI_AIRPLAY_SUPPORT="yes"
+
+# build with AirTunes support (stream music from iDevices to KODI) (yes / no)
+  KODI_AIRTUNES_SUPPORT="yes"
+
+# build with libnfs support (mounting nfs shares with KODI) (yes / no)
+  KODI_NFS_SUPPORT="yes"
+
+# build with afpfs-ng support (mounting AFP shares with KODI) (yes / no)
+  KODI_AFP_SUPPORT="no"
+
+# build with Samba Client support (mounting SAMBA shares with KODI) (yes / no)
+  KODI_SAMBA_SUPPORT="yes"
+
+# build with NFS support (mounting nfs shares via the OS) (yes / no)
+  NFS_SUPPORT="yes"
+
+# build with Samba Client support (mounting samba shares via the OS) (yes / no)
+  SAMBA_SUPPORT="yes"
+
+# build and install Samba Server (yes / no)
+  SAMBA_SERVER="yes"
+
+# build and install SFTP Server (yes / no)
+  SFTP_SERVER="yes"
+
+# build and install PPP support (yes / no)
+  PPTP_SUPPORT="yes"
+
+# build and install OpenVPN support (yes / no)
+  OPENVPN_SUPPORT="yes"
+
+# build and install diskmounter support (udevil)
+# this service provide auto mounting support for external drives in the
+# mediacenter also automount internally drives at boottime via udev (yes / no)
+  UDEVIL="yes"
+
+# build and install exFAT fuse support (yes / no)
+  EXFAT="yes"
+
+# build and install NTFS-3G fuse support (yes / no)
+  NTFS3G="yes"
+
+# build and install hfs filesystem utilities (yes / no)
+  HFSTOOLS="yes"
+
+# Windowmanager to use (ratpoison / fluxbox / none)
+  WINDOWMANAGER="none"
+
+# Xorg Graphic drivers to use (all / i915,i965,r200,r300,r600,nvidia,nouveau)
+# Space separated list is supported,
+# e.g. GRAPHIC_DRIVERS="i915 i965 r300 r600 radeonsi nvidia nouveau"
+  if [ "$TARGET_ARCH" = "i386" ]; then
+    # TODO: create Legacy build with OpenELEC-4.2
+    # install legacy drivers to i386 ARCH
+    GRAPHIC_DRIVERS="r200 r300 r600 i915 i965 nouveau"
+  elif [ "$TARGET_ARCH" = "x86_64" ]; then
+    GRAPHIC_DRIVERS="r300 r600 radeonsi i915 i965 nouveau"
+  fi
+
+# build and install remote support (yes / no)
+  REMOTE_SUPPORT="no"
+
+# build and install ATV IR remote support (yes / no)
+  ATVCLIENT_SUPPORT="no"
+
+# build and install IRServer IR/LCD support (yes / no)
+  IRSERVER_SUPPORT="no"
+
+# build and install Joystick support (yes / no)
+  JOYSTICK_SUPPORT="yes"
+
+# build and install CEC adapter support (yes / no)
+  CEC_SUPPORT="yes"
+
+# build and install iSCSI support - iscsistart (yes / no)
+  ISCSI_SUPPORT="yes"
+
+# LCD driver to Use - Possible drivers are ( Comma seperated:
+# bayrad,CFontz,CFontz633,CFontzPacket,curses,CwLnx,dm140,
+# ea65,EyeboxOne,g15,glcdlib,glk,hd44780,i2500vfd,
+# icp_a106,imon,imonlcd,IOWarrior,irman,irtrans,
+# joy,lb216,lcdm001,lcterm,lirc,lis,MD8800,mdm166a,
+# ms6931,mtc_s16209x,MtxOrb,mx5000,NoritakeVFD,
+# picolcd,pyramid,sed1330,sed1520,serialPOS,
+# serialVFD,shuttleVFD,sli,stv5730,SureElec,svga,vlsys_m428
+# 'all' compiles all drivers;
+# 'all,!xxx,!yyy' de-selects previously selected drivers
+# "none" for disable LCD support
+  LCD_DRIVER="irtrans,imon,imonlcd,mdm166a,MtxOrb,lis,dm140,hd44780,CFontz,SureElec,vlsys_m428,serialVFD,shuttleVFD"
+
+# Support for partitioning and formating disks in initramfs (yes / no)
+# This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
+  INITRAMFS_PARTED_SUPPORT="no"
+
+# build with swap support (yes / no)
+  SWAP_SUPPORT="no"
+
+# swap support enabled per default (yes / no)
+  SWAP_ENABLED_DEFAULT="no"
+
+# swapfile size if SWAP_SUPPORT=yes in MB
+  SWAPFILESIZE="256"
+
+# build with installer (yes / no)
+  INSTALLER_SUPPORT="yes"
+
+# Testpackages for development (yes / no)
+  TESTING="no"
+
+# OEM packages for OEM's (yes / no)
+  OEM_SUPPORT="yes"
+
+# build and install nano text editor (yes / no)
+  NANO_EDITOR="yes"
+
+# cron support (yes / no)
+  CRON_SUPPORT="yes"
+
+# Perf support in development builds (yes / no)
+  PERF_SUPPORT="yes"
+
+# Distribution Specific source location
+  DISTRO_MIRROR="http://sources.openelec.tv/mirror"
+  DISTRO_SRC="http://sources.openelec.tv/$OPENELEC_VERSION"
+
+# Addon Server Url
+  ADDON_SERVER_URL="http://addons.openelec.tv"
+
+# set the addon dirs
+  ADDON_PATH="$ADDON_VERSION/$PROJECT/$TARGET_ARCH"
+  ADDON_URL="$ADDON_SERVER_URL/$ADDON_PATH"
+
+  LAKKA_MIRROR="http://sources.lakka.tv"
+  RA_PLAYLIST_NAMES="Atari - 2600.lpl;Atari - 5200.lpl;Atari - 7800.lpl;Atari - Jaguar.lpl;Atari - Lynx.lpl;Atari - ST.lpl;Bandai - WonderSwan Color.lpl;Bandai - WonderSwan.lpl;Coleco - ColecoVision.lpl;DOOM.lpl;FB Alpha - Arcade Games.lpl;GCE - Vectrex.lpl;Magnavox - Odyssey2.lpl;MAME.lpl;Microsoft - MSX2.lpl;Microsoft - MSX.lpl;NEC - PC Engine SuperGrafx.lpl;NEC - PC Engine - TurboGrafx 16.lpl;Nintendo - Famicom Disk System.lpl;Nintendo - Game Boy Advance (e-Cards).lpl;Nintendo - Game Boy Advance.lpl;Nintendo - Game Boy Color.lpl;Nintendo - Game Boy.lpl;Nintendo - Nintendo 64.lpl;Nintendo - Nintendo DS Decrypted.lpl;Nintendo - Nintendo DS (Download Play) (BETA).lpl;Nintendo - Nintendo DSi Decrypted.lpl;Nintendo - Nintendo DSi (DLC).lpl;Nintendo - Nintendo Entertainment System.lpl;Nintendo - Satellaview.lpl;Nintendo - Super Nintendo Entertainment System.lpl;Nintendo - Virtual Boy.lpl;Quake1.lpl;ScummVM.lpl;Sega - 32X.lpl;Sega - Game Gear.lpl;Sega - Master System - Mark III.lpl;Sega - Mega Drive - Genesis.lpl;Sega - PICO.lpl;Sega - SG-1000.lpl;Sinclair - ZX Spectrum +3.lpl;SNK - Neo Geo Pocket Color.lpl;SNK - Neo Geo Pocket.lpl;Sony - PlayStation Portable.lpl;Sony - PlayStation.lpl"
+  RA_PLAYLIST_CORES="/tmp/cores/stella_libretro.so;DETECT;/tmp/cores/prosystem_libretro.so;/tmp/cores/virtualjaguar_libretro.so;/tmp/cores/handy_libretro.so;/tmp/cores/hatari_libretro.so;/tmp/cores/mednafen_wswan_libretro.so;/tmp/cores/mednafen_wswan_libretro.so;/tmp/cores/bluemsx_libretro.so;/tmp/cores/prboom_libretro.so;/tmp/cores/fba_libretro.so;/tmp/cores/vecx_libretro.so;/tmp/cores/o2em_libretro.so;/tmp/cores/mame_libretro.so;/tmp/cores/bluemsx_libretro.so;/tmp/cores/bluemsx_libretro.so;/tmp/cores/mednafen_supergrafx_libretro.so;/tmp/cores/mednafen_pce_fast_libretro.so;/tmp/cores/nestopia_libretro.so;/tmp/cores/gpsp_libretro.so;/tmp/cores/gpsp_libretro.so;/tmp/cores/gambatte_libretro.so;/tmp/cores/gambatte_libretro.so;/tmp/cores/mupen64plus_libretro.so;/tmp/cores/desmume_libretro.so;/tmp/cores/desmume_libretro.so;/tmp/cores/desmume_libretro.so;/tmp/cores/desmume_libretro.so;/tmp/cores/nestopia_libretro.so;/tmp/cores/snes9x_next_libretro.so;/tmp/cores/snes9x_next_libretro.so;/tmp/cores/mednafen_vb_libretro.so;/tmp/cores/tyrquake_libretro.so;/tmp/cores/scummvm_libretro.so;/tmp/cores/picodrive_libretro.so;/tmp/cores/genesis_plus_gx_libretro.so;/tmp/cores/genesis_plus_gx_libretro.so;/tmp/cores/genesis_plus_gx_libretro.so;/tmp/cores/picodrive_libretro.so;/tmp/cores/genesis_plus_gx_libretro.so;/tmp/cores/fuse_libretro.so;/tmp/cores/mednafen_ngp_libretro.so;/tmp/cores/mednafen_ngp_libretro.so;/tmp/cores/ppsspp_libretro.so;/tmp/cores/pcsx_rearmed_libretro.so"

distributions/OpenELEC/options

@@ -0,0 +1,224 @@
+# Name of the Distro to build (full name, without special characters)
+  DISTRONAME="OpenELEC"
+
+# short project description
+  DESCRIPTION="OpenELEC is a fast and userfriendly Kodi Entertainment Center distribution."
+
+# Welcome Message for e.g. SSH Server (up to 5 Lines)
+  GREETING0="##############################################"
+  GREETING1="# OpenELEC - The living room PC for everyone #"
+  GREETING2="# ...... visit http://www.openelec.tv ...... #"
+  GREETING3="##############################################"
+  GREETING4=""
+
+# Root password to integrate in the target system
+  ROOT_PASSWORD="openelec"
+
+# Mediacenter to use (kodi / no)
+  MEDIACENTER="kodi"
+
+# Skins to install (Confluence)
+# Space separated list is supported,
+# e.g. SKINS="Confluence"
+  SKINS="Confluence"
+
+# Default Skin (Confluence)
+  SKIN_DEFAULT="Confluence"
+
+# install extra subtitle Fonts for KODI (yes / no)
+  KODI_EXTRA_FONTS="yes"
+
+# build and install 'RSXS' Screensaver (yes / no)
+  KODI_SCR_RSXS="yes"
+
+# build and install 'ProjectM' Visualization (yes / no)
+  KODI_VIS_PROJECTM="yes"
+
+# build and install 'GOOM' Visualization (yes / no)
+  KODI_VIS_GOOM="yes"
+
+# build and install 'Waveform' Visualization (yes / no)
+  KODI_VIS_WAVEFORM="yes"
+
+# build and install 'Spectrum' Visualization (yes / no)
+  KODI_VIS_SPECTRUM="yes"
+
+# build and install 'FishBMC' Visualization (yes / no)
+  # does not work on RPi
+  KODI_VIS_FISHBMC="yes"
+
+# build and install espeak support (yes / no)
+  ESPEAK_SUPPORT="yes"
+
+# build and install with non-free support
+# (RAR compression support in KODI) (yes / no)
+  KODI_NONFREE_SUPPORT="yes"
+
+# build and install with BluRay support (yes / no)
+  KODI_BLURAY_SUPPORT="yes"
+
+# build and install with BD+ support
+# (BD+ decryption support in KODI) (yes / no)
+  BLURAY_BDPLUS_SUPPORT="yes"
+
+# build and install with AACS support
+# (BD decryption support in KODI) (yes / no)
+  BLURAY_AACS_SUPPORT="yes"
+
+# build and install with DVDCSS support
+# (DVD decryption support in KODI) (yes / no)
+  KODI_DVDCSS_SUPPORT="yes"
+
+# additional drivers to install:
+# for a list of additinoal drivers see packages/linux-drivers
+# Space separated list is supported,
+# e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"
+  ADDITIONAL_DRIVERS="RTL8192CU RTL8192DU RTL8188EU RTL8812AU dvbhdhomerun"
+
+# build and install bluetooth support (yes / no)
+  BLUETOOTH_SUPPORT="yes"
+
+# build and install with KODI webfrontend (yes / no)
+  KODI_WEBSERVER_SUPPORT="yes"
+
+# build and install Avahi (Zeroconf) daemon (yes / no)
+  AVAHI_DAEMON="yes"
+
+# build with UPnP support (yes / no)
+  KODI_UPNP_SUPPORT="yes"
+
+# build with MySQL support (yes / no)
+  KODI_MYSQL_SUPPORT="yes"
+
+# build xbmc with sshlib support (yes / no)
+  KODI_SSHLIB_SUPPORT="yes"
+
+# build xbmc with optical drive support (yes / no)
+  KODI_OPTICAL_SUPPORT="yes"
+
+# KODI Audio encoders for usage with optical drive support
+# Space separated list is supported,
+# e.g. KODI_AUDIOENCODER_ADDONS="ENCODER1 ENCODER2"
+  KODI_AUDIOENCODER_ADDONS="flac lame vorbis wav"
+
+# build with AirPlay support (stream videos from iDevices to KODI) (yes / no)
+  KODI_AIRPLAY_SUPPORT="yes"
+
+# build with AirTunes support (stream music from iDevices to KODI) (yes / no)
+  KODI_AIRTUNES_SUPPORT="yes"
+
+# build with libnfs support (mounting nfs shares with KODI) (yes / no)
+  KODI_NFS_SUPPORT="yes"
+
+# build with Samba Client support (mounting SAMBA shares with KODI) (yes / no)
+  KODI_SAMBA_SUPPORT="yes"
+
+# build with NFS support (mounting nfs shares via the OS) (yes / no)
+  NFS_SUPPORT="yes"
+
+# build with Samba Client support (mounting samba shares via the OS) (yes / no)
+  SAMBA_SUPPORT="yes"
+
+# build and install Samba Server (yes / no)
+  SAMBA_SERVER="yes"
+
+# build and install SFTP Server (yes / no)
+  SFTP_SERVER="yes"
+
+# build and install diskmounter support (udevil)
+# this service provide auto mounting support for external drives in the
+# mediacenter also automount internally drives at boottime via udev (yes / no)
+  UDEVIL="yes"
+
+# build and install exFAT fuse support (yes / no)
+  EXFAT="yes"
+
+# build and install NTFS-3G fuse support (yes / no)
+  NTFS3G="yes"
+
+# build and install hfs filesystem utilities (yes / no)
+  HFSTOOLS="yes"
+
+# Windowmanager to use (ratpoison / fluxbox / none)
+  WINDOWMANAGER="fluxbox"
+
+# Xorg Graphic drivers to use (all / i915,i965,r200,r300,r600,nvidia,nouveau)
+# Space separated list is supported,
+# e.g. GRAPHIC_DRIVERS="i915 i965 r300 r600 radeonsi nvidia nouveau"
+  if [ "$TARGET_ARCH" = "i386" ]; then
+    # TODO: create Legacy build with OpenELEC-4.2
+    # install legacy drivers to i386 ARCH
+    GRAPHIC_DRIVERS="r200 r300 r600 i915 i965 nvidia-legacy"
+  elif [ "$TARGET_ARCH" = "x86_64" ]; then
+    GRAPHIC_DRIVERS="r300 r600 radeonsi i915 i965 nvidia"
+  fi
+
+# build and install remote support (yes / no)
+  REMOTE_SUPPORT="yes"
+
+# build and install ATV IR remote support (yes / no)
+  ATVCLIENT_SUPPORT="yes"
+
+# build and install IRServer IR/LCD support (yes / no)
+  IRSERVER_SUPPORT="yes"
+
+# build and install Joystick support (yes / no)
+  JOYSTICK_SUPPORT="yes"
+
+# build and install CEC adapter support (yes / no)
+  CEC_SUPPORT="yes"
+
+# build and install iSCSI support - iscsistart (yes / no)
+  ISCSI_SUPPORT="yes"
+
+# LCD driver to Use - Possible drivers are ( Comma seperated:
+# bayrad,CFontz,CFontz633,CFontzPacket,curses,CwLnx,dm140,
+# ea65,EyeboxOne,g15,glcdlib,glk,hd44780,i2500vfd,
+# icp_a106,imon,imonlcd,IOWarrior,irman,irtrans,
+# joy,lb216,lcdm001,lcterm,lirc,lis,MD8800,mdm166a,
+# ms6931,mtc_s16209x,MtxOrb,mx5000,NoritakeVFD,
+# picolcd,pyramid,sed1330,sed1520,serialPOS,
+# serialVFD,shuttleVFD,sli,stv5730,SureElec,svga,vlsys_m428
+# 'all' compiles all drivers;
+# 'all,!xxx,!yyy' de-selects previously selected drivers
+# "none" for disable LCD support
+  LCD_DRIVER="irtrans,imon,imonlcd,mdm166a,MtxOrb,lis,dm140,hd44780,CFontz,SureElec,vlsys_m428,serialVFD,shuttleVFD"
+
+# Support for partitioning and formating disks in initramfs (yes / no)
+# This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
+  INITRAMFS_PARTED_SUPPORT="no"
+
+# build with swap support (yes / no)
+  SWAP_SUPPORT="no"
+
+# swap support enabled per default (yes / no)
+  SWAP_ENABLED_DEFAULT="no"
+
+# swapfile size if SWAP_SUPPORT=yes in MB
+  SWAPFILESIZE="256"
+
+# build with installer (yes / no)
+  INSTALLER_SUPPORT="yes"
+
+# Testpackages for development (yes / no)
+  TESTING="no"
+
+# OEM packages for OEM's (yes / no)
+  OEM_SUPPORT="no"
+
+# build and install nano text editor (yes / no)
+  NANO_EDITOR="yes"
+
+# cron support (yes / no)
+  CRON_SUPPORT="yes"
+
+# Distribution Specific source location
+  DISTRO_MIRROR="http://sources.openelec.tv/mirror"
+  DISTRO_SRC="http://sources.openelec.tv/$OPENELEC_VERSION"
+
+# Addon Server Url
+  ADDON_SERVER_URL="http://addons.openelec.tv"
+
+# set the addon dirs
+  ADDON_PATH="$ADDON_VERSION/$PROJECT/$TARGET_ARCH"
+  ADDON_URL="$ADDON_SERVER_URL/$ADDON_PATH"

nightlies.sh

@@ -0,0 +1,32 @@
+#!/bin/bash
+
+rm -rf target/
+
+DISTRO=Lakka PROJECT=Generic ARCH=x86_64 make image -j9
+DISTRO=Lakka PROJECT=Generic ARCH=i386 make image -j9
+DISTRO=Lakka PROJECT=RPi ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=RPi ARCH=arm make noobs -j9
+DISTRO=Lakka PROJECT=RPi2 ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=RPi2 ARCH=arm make noobs -j9
+DISTRO=Lakka PROJECT=imx6 SYSTEM=cuboxi ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=imx6 SYSTEM=udoo ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=a20 ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=a10 ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=Bananapi ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=OdroidC1 ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=OdroidXU3 ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=WeTek_Play ARCH=arm make image -j9
+DISTRO=Lakka PROJECT=WeTek_Core ARCH=arm make image -j9
+
+for f in target/*; do
+  md5sum $f > $f.md5
+  sha256sum $f > $f.sha256
+done
+
+for f in target/*; do
+  dir=`echo $f | sed -e 's/target\/Lakka-\(.*\)-devel-\(.*\)/\1/'`
+  mkdir -p target/$dir
+  mv $f target/$dir/
+done
+
+#scp -r target/* [email protected]:sources/nightly/

packages/3rdparty/lib/cxxtools/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="cxxtools"
-PKG_VERSION="2.2"
+PKG_VERSION="2.2.1"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL-2"

packages/3rdparty/multimedia/vdr-sc/patches/vdr-sc-01_crosscompiling.patch

@@ -1,12 +0,0 @@
-diff -Naur vdr-sc-603/Makefile vdr-sc-603.patch/Makefile
---- vdr-sc-603/Makefile	2011-12-24 04:02:53.000000000 +0100
-+++ vdr-sc-603.patch/Makefile	2011-12-29 18:57:21.660586103 +0100
-@@ -213,7 +213,7 @@
- 	@cp -p $< $@
- 
- $(FFDECSA) $(FFDECSATEST): $(FFDECSADIR)/*.c $(FFDECSADIR)/*.h
--	@$(MAKE) COMPILER="$(CXX)" FLAGS="$(CSAFLAGS) -march=$(CPUOPT)" PARALLEL_MODE=$(PARALLEL) -C $(FFDECSADIR) all
-+	@$(MAKE) COMPILER="$(CXX)" FLAGS="$(CSAFLAGS)" PARALLEL_MODE=$(PARALLEL) -C $(FFDECSADIR) FFdecsa.o
- 
- $(I18Npot): $(shell grep -rl '\(tr\|trNOOP\)(\".*\")' *.c $(SYSDIR))
- 	xgettext -C -cTRANSLATORS --no-wrap --no-location -k -ktr -ktrNOOP --msgid-bugs-address='<[email protected]>' -o $@ `ls $^`

packages/3rdparty/multimedia/vdr-sc/patches/vdr-sc-02_vdr-2.1.3.patch

@@ -1,31 +0,0 @@
-diff --git a/device.c b/device.c
-index 04bbef1..e6d63aa 100644
---- a/device.c
-+++ b/device.c
-@@ -357,7 +357,7 @@ bool cScDevices::Initialize(void)
-   *vdr_nci=0; *vdr_ud=vdr_save_ud;
- 
-   int i, found=0;
--  for(i=0; i<MAXDVBDEVICES; i++) {
-+  for(i=0; i<MAXDEVICES; i++) {
-     if(UseDevice(NextCardIndex())) {
-       char name[128];
-       cScDevices::DvbName(DEV_DVB_FRONTEND,i,0,name,sizeof(name));
-@@ -382,7 +382,7 @@ bool cScDevices::Initialize(void)
-       }
-     else NextCardIndex(1);
-     }
--  NextCardIndex(MAXDVBDEVICES-i);
-+  NextCardIndex(MAXDEVICES-i);
-   if(found>0) PRINTF(L_GEN_INFO,"captured %d video device%s",found,found>1 ? "s" : "");
-   else PRINTF(L_GEN_INFO,"no DVB device captured");
-   return found>0;
-@@ -411,7 +411,7 @@ void cScDevices::Shutdown(void)
- 
- void cScDevices::SetForceBudget(int n)
- {
--   if(n>=0 && n<MAXDVBDEVICES) budget|=(1<<n);
-+   if(n>=0 && n<MAXDEVICES) budget|=(1<<n);
- }
- 
- bool cScDevices::ForceBudget(int n)

packages/3rdparty/multimedia/vdr-sc/patches/vdr-sc-03_vdr-2.1.4.patch

@@ -1,73 +0,0 @@
-## source: http://overlays.gentoo.org/svn/proj/vdr/vdr-devel/media-plugins/vdr-sc/files/
-
-diff -r 29b7b5f231c8 cam.c
---- a/cam.c	Sat Jul 21 20:51:33 2012 +0200
-+++ b/cam.c	Wed Jan 08 16:47:38 2014 +0400
-@@ -1841,7 +1841,7 @@
-   cScCamSlot(cCam *Cam, const char *DevId, int Slot);
-   void Process(const unsigned char *data, int len);
-   eModuleStatus Status(void);
--  bool Reset(bool log=true);
-+  bool ResetSlot(bool log=true);
-   cCiFrame *Frame(void) { return &frame; }
-   };
- 
-@@ -1853,7 +1853,7 @@
-   cam=Cam; devId=DevId; slot=Slot;
-   version=0; caids[0]=0; doReply=false; lastStatus=msReset;
-   frame.SetRb(&rb);
--  Reset(false);
-+  ResetSlot(false);
- }
- 
- eModuleStatus cScCamSlot::Status(void)
-@@ -1876,7 +1876,7 @@
-   return status;
- }
- 
--bool cScCamSlot::Reset(bool log)
-+bool cScCamSlot::ResetSlot(bool log)
- {
-   reset=true; resetTimer.Set(SLOT_RESET_TIME);
-   rb.Clear();
-@@ -1890,7 +1890,7 @@
-   bool dr=cam->IsSoftCSA(false) || ScSetup.ConcurrentFF>0;
-   if(dr!=doReply && !IsDecrypting()) {
-     PRINTF(L_CORE_CI,"%s.%d: doReply changed, reset triggered",devId,slot);
--    Reset(false);
-+    ResetSlot(false);
-     doReply=dr;
-     }
-   if(checkTimer.TimedOut()) {
-@@ -2330,7 +2330,7 @@
- {
-   cMutexLock lock(&ciMutex);
-   PRINTF(L_CORE_CI,"%s: reset of slot %d requested",devId,Slot);
--  return slots[Slot] ? slots[Slot]->Reset():false;
-+  return slots[Slot] ? slots[Slot]->ResetSlot():false;
- }
- 
- eModuleStatus cCam::ModuleStatus(int Slot)
---- a/device-tmpl.c	2012-07-21 20:51:33.000000000 +0200
-+++ b/device-tmpl.c	2014-01-26 13:51:59.000000000 +0100
-@@ -41,7 +41,6 @@
- #endif //!SASC
- protected:
- #ifndef SASC
--  virtual bool Ready(void);
-   virtual bool SetPid(cPidHandle *Handle, int Type, bool On);
-   virtual bool SetChannelDevice(const cChannel *Channel, bool LiveView);
-   virtual bool OpenDvr(void);
-@@ -164,12 +163,6 @@
-   return cam || hwciadapter;
- }
- 
--bool SCDEVICE::Ready(void)
--{
--  return (cam         ? cam->Ready():true) &&
--         (hwciadapter ? hwciadapter->Ready():true);
--}
--
- bool SCDEVICE::SetPid(cPidHandle *Handle, int Type, bool On)
- {
-   if(cam) cam->SetPid(Type,Handle->pid,On);

packages/3rdparty/multimedia/vdr-wirbelscan/patches/vdr-wirbelscan-0.0.7-receiver-api-fixes.patch

@@ -1,51 +0,0 @@
-commit 64f969e39d18aefa263dc3a61172e33df33963fb
-Author: Stefan Saraev <[email protected]>
-Date:   Thu Mar 29 20:22:11 2012 +0300
-
-    wirbelscan: receiver-api-fixes
-
-diff --git a/statemachine.c b/statemachine.c
-index 48a212e..bc0c8e5 100644
---- a/statemachine.c
-+++ b/statemachine.c
-@@ -36,12 +36,12 @@ protected:
-     while (Running()) cCondWait::SleepMs(5);
-     }; /*TODO: check here periodically for lock and wether we got any data!*/
- public:
--  cScanReceiver(tChannelID ChannelID, int AnyPid);
-+  cScanReceiver(const cChannel* chan, int AnyPid);
-   virtual ~cScanReceiver() {cReceiver::Detach(); };
-   };
- 
--cScanReceiver::cScanReceiver(tChannelID ChannelID, int AnyPid) :
--     cReceiver(ChannelID, 99, AnyPid), cThread("dummy receiver") { }
-+cScanReceiver::cScanReceiver(const cChannel* chan, int AnyPid) :
-+     cReceiver(chan, 99), cThread("dummy receiver") {  AddPid(AnyPid); }
- 
- ///!-----------------------------------------------------------------
- ///!  v 0.0.5, store state in lastState if different and print state
-@@ -144,7 +144,7 @@ void cStateMachine::Action(void) {
-          ScannedTransponders.Add(ScannedTransponder);
- 
-          dev->SwitchChannel(Transponder, false);
--         aReceiver = new cScanReceiver(Transponder->GetChannelID(), 99);
-+         aReceiver = new cScanReceiver(Transponder, 99);
-          dev->AttachReceiver(aReceiver);
- 
-          cCondWait::SleepMs(1000);
-diff --git a/ttext.c b/ttext.c
-index 0053936..0864484 100644
---- a/ttext.c
-+++ b/ttext.c
-@@ -374,9 +374,9 @@ void cSwReceiver::Action() {
-      }
- }
- 
--cSwReceiver::cSwReceiver(cChannel * Channel) : cReceiver(Channel->GetChannelID(),
--   100, Channel->Tpid()), cThread("ttext") {
-+cSwReceiver::cSwReceiver(cChannel * Channel) : cReceiver(Channel, 100), cThread("ttext") {
- 
-+   AddPid(Channel->Tpid());
-    stopped = fuzzy = false;
-    channel = Channel;
-    buffer  = new cRingBufferLinear(MEGABYTE(1),184);

packages/3rdparty/multimedia/vdr/patches/vdr-02_disable_eitscan.patch

@@ -1,12 +0,0 @@
-diff -Nru vdr-1.7.15-vanilla/eitscan.c vdr-1.7.15-disable_eitscan/eitscan.c
---- vdr-1.7.15-vanilla/eitscan.c	2010-06-06 19:11:14.000000000 +0300
-+++ vdr-1.7.15-disable_eitscan/eitscan.c	2010-06-06 20:44:07.000000000 +0300
-@@ -146,7 +146,7 @@
-                if (Device) {
-                   for (cScanData *ScanData = scanList->First(); ScanData; ScanData = scanList->Next(ScanData)) {
-                       const cChannel *Channel = ScanData->GetChannel();
--                      if (Channel) {
-+                      if (Channel && !cSource::IsType(Channel->Source(), 'I')) {
-                          if (!Channel->Ca() || Channel->Ca() == Device->DeviceNumber() + 1 || Channel->Ca() >= CA_ENCRYPTED_MIN) {
-                             if (Device->ProvidesTransponder(Channel)) {
-                                if (!Device->Receiving()) {

packages/3rdparty/multimedia/vdr/patches/vdr-03_no-locale-support.patch

@@ -1,27 +0,0 @@
-From 092b87b7789206f041de68016fb9a900577a6681 Mon Sep 17 00:00:00 2001
-From: Stefan Saraev <[email protected]>
-Date: Sun, 13 Oct 2013 20:40:36 +0300
-Subject: [PATCH] no locale support
-
----
- vdr.c |    4 ----
- 1 files changed, 0 insertions(+), 4 deletions(-)
-
-diff --git a/vdr.c b/vdr.c
-index ba59f07..c1b0541 100644
---- a/vdr.c
-+++ b/vdr.c
-@@ -637,10 +637,6 @@ int main(int argc, char *argv[])
-      cCharSetConv::SetSystemCharacterTable(CodeSet);
-      }
- 
--  // Initialize internationalization:
--
--  I18nInitialize(LocaleDirectory);
--
-   // Main program loop variables - need to be here to have them initialized before any EXIT():
- 
-   cEpgDataReader EpgDataReader;
--- 
-1.7.2.5
-

packages/3rdparty/web/tntnet/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="tntnet"
-PKG_VERSION="2.2"
+PKG_VERSION="2.2.1"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL-2"
@@ -50,10 +50,6 @@ PKG_CONFIGURE_OPTS_TARGET="--disable-unittest \
                            --with-ssl=no \
                            --with-stressjob=no"
 
-pre_configure_target() {
-  strip_lto
-}
-
 post_makeinstall_target() {
   rm -rf $INSTALL/usr/bin
   rm -rf $INSTALL/usr/share

packages/addons/driver/hdhomerun/changelog.txt

@@ -1,3 +1,9 @@
+4.3.2
+  allow running scripts from addon settings
+4.3.1
+  rebuild for addon api bump
+4.3.0
+  rebuild for addon api bump
 4.1.2
   clean up
 4.1.0

packages/addons/driver/hdhomerun/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="hdhomerun"
-PKG_VERSION="4.1"
+PKG_VERSION="4.3"
 PKG_REV="2"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/addons/driver/hdhomerun/source/bin/userspace-driver.sh

@@ -32,8 +32,8 @@ unlock() { flock -u $HDHR_LOCKFD; flock -xn $HDHR_LOCKFD && rm -f "$HDHR_LOCKFIL
 # exclusive lock
 exlock
 
-HDHR_ADDON_DIR="$HOME/.xbmc/addons/driver.dvb.hdhomerun"
-HDHR_ADDON_HOME="$HOME/.xbmc/userdata/addon_data/driver.dvb.hdhomerun"
+HDHR_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.hdhomerun"
+HDHR_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.hdhomerun"
 HDHR_ADDON_SETTINGS="$HDHR_ADDON_HOME/settings.xml"
 
 # modules are not automatically loaded

packages/addons/driver/hdhomerun/source/default.py

@@ -1,6 +1,6 @@
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2013 Stephan Raue ([email protected])
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -15,18 +15,3 @@
 #  You should have received a copy of the GNU General Public License
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
-
-import os
-import sys
-import xbmcaddon
-
-__settings__      = xbmcaddon.Addon(id = 'driver.dvb.hdhomerun')
-__cwd__           = __settings__.getAddonInfo('path')
-__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
-__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
-
-if __name__ == "__main__" and len(sys.argv) == 2 and sys.argv[1] == 'refresh_tuners':
-  sys.path.append(__resources_lib__)
-  from functions import refresh_hdhomerun_tuners
-  refresh_hdhomerun_tuners(__settings_xml__)
-  __settings__.openSettings()

packages/addons/driver/hdhomerun/source/resources/actions.py

@@ -1,4 +1,3 @@
-#!/bin/sh
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
 #      Copyright (C) 2009-2014 Stephan Raue ([email protected])
@@ -16,27 +15,18 @@
 #  You should have received a copy of the GNU General Public License
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
-# copy userconfig and samples
 
-. /etc/profile
+import os
+import sys
+import xbmcaddon
 
-if [ -d /usr/config ]; then
-  progress "copy userconfig and samples"
+__settings__      = xbmcaddon.Addon(id = 'driver.dvb.hdhomerun')
+__cwd__           = __settings__.getAddonInfo('path')
+__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
+__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
 
-    cd /usr/config
-    mkdir -p /storage/.config
-
-    for dir in `find . -type d`; do
-      mkdir -p /storage/.config/$dir
-    done
-
-    for config in `find . -type f -not -name "*.sample"`; do
-      if [ ! -f /storage/.config/$config ]; then
-        cp $config /storage/.config/$config
-      fi
-    done
-
-    for sample in `find . -type f -name "*.sample"`; do
-      cp $sample /storage/.config/$sample
-    done
-fi
+if len(sys.argv) == 2 and sys.argv[1] == 'refresh_tuners':
+  sys.path.append(__resources_lib__)
+  from functions import refresh_hdhomerun_tuners
+  refresh_hdhomerun_tuners(__settings_xml__)
+  __settings__.openSettings()

packages/addons/driver/hdhomerun/source/resources/lib/functions.py

@@ -24,7 +24,7 @@ import shutil
 import xmlpp
 from xml.dom import minidom
 
-__sundtek_userspace__ = '/storage/.xbmc/userdata/addon_data/driver.dvb.sundtek-mediatv/'
+__sundtek_userspace__ = '/storage/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv/'
 
 ######################################################################################################
 # backup setting.xml file only if backup doesn't exist

packages/addons/driver/hdhomerun/source/resources/lib/xmlpp.py

@@ -37,36 +37,39 @@ def _usage(this_file):
     return """SYNOPSIS: pretty print an XML document
 USAGE: python %s <filename> \n""" % this_file
 
-def _pprint_line(indent_level, line, width=100, output=_sys.stdout):
+def _pprint_line(indent_level, line, width=100, output=_sys.stdout, ignore_contents = False):
     if line.strip():
         start = ""
         number_chars = 0
         for l in range(indent_level):
             start = start + " "
             number_chars = number_chars + 1
-        try:
-            elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
-            elem_finished = _re.findall("([?|\]\]/]*\>)", line)[0] 
-            #should not have *
-            attrs = _re.findall("(\S*?\=\".*?\")", line)
-            output.write(start + elem_start)
-            number_chars = len(start + elem_start)
-            for attr in attrs:
-                if (attrs.index(attr) + 1) == len(attrs):
-                    number_chars = number_chars + len(elem_finished)
-                if (number_chars + len(attr) + 1) > width:
-                    output.write("\n")
-                    for i in range(len(start + elem_start) + 1):
+        if not ignore_contents:
+            try:
+                elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
+                elem_finished = _re.findall("([?|\]\]/|\-\-]*\>)", line)[0] 
+                #should not have *
+                attrs = _re.findall("(\S*?\=\".*?\")", line)
+                output.write(start + elem_start)
+                number_chars = len(start + elem_start)
+                for attr in attrs:
+                    if (attrs.index(attr) + 1) == len(attrs):
+                        number_chars = number_chars + len(elem_finished)
+                    if (number_chars + len(attr) + 1) > width:
+                        output.write("\n")
+                        for i in range(len(start + elem_start) + 1):
+                            output.write(" ")
+                        number_chars = len(start + elem_start) + 1 
+                    else:
                         output.write(" ")
-                    number_chars = len(start + elem_start) + 1 
-                else:
-                    output.write(" ")
-                    number_chars = number_chars + 1
-                output.write(attr)
-                number_chars = number_chars + len(attr)
-            output.write(elem_finished + "\n")
-        except IndexError:
-            #give up pretty print this line
+                        number_chars = number_chars + 1
+                    output.write(attr)
+                    number_chars = number_chars + len(attr)
+                output.write(elem_finished + "\n")
+            except IndexError:
+                #give up pretty print this line
+                output.write(start + line + "\n")
+        else:
             output.write(start + line + "\n")
                 
 
@@ -80,7 +83,8 @@ def _get_next_elem(data):
     start_pos = data.find("<")
     end_pos = data.find(">") + 1
     retval = data[start_pos:end_pos]
-    stopper = retval.rfind("/") 
+    stopper = retval.rfind("/")
+    ignore_contents = False
     if stopper < retval.rfind("\""):
         stopper = -1
     single = (stopper > -1 and ((retval.find(">") - stopper) < (stopper - retval.find("<"))))
@@ -89,11 +93,19 @@ def _get_next_elem(data):
     ignore_question =  retval.find("<?") > -1
 
     if ignore_excl:
+        ignore_contents = True
         cdata = retval.find("<![CDATA[") > -1
         if cdata:
             end_pos = data.find("]]>")
             if end_pos > -1:
                 end_pos = end_pos + len("]]>")
+                stopper = end_pos
+        else:
+            end_pos = data.find("-->")
+            if end_pos > -1:
+                end_pos = end_pos + len("-->")
+                stopper = end_pos
+        retval = data[start_pos:end_pos]
 
     elif ignore_question:
         end_pos = data.find("?>") + len("?>")
@@ -101,11 +113,12 @@ def _get_next_elem(data):
     
     no_indent = ignore or single
 
-    #print retval, end_pos, start_pos, stopper > -1, no_indent
+    
     return start_pos, \
            end_pos, \
            stopper > -1, \
-           no_indent
+           no_indent, \
+           ignore_contents
 
 def get_pprint(xml, indent=4, width=80):
     """Returns the pretty printed xml """
@@ -116,6 +129,8 @@ def get_pprint(xml, indent=4, width=80):
             self.output += string
     out = out()
     pprint(xml, output=out, indent=indent, width=width)
+    
+
 
     return out.output
 
@@ -126,7 +141,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
     Use indent to select indentation level. Default is 4   """
     data = xml
     indent_level = 0
-    start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
+    start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
     while ((start_pos > -1 and end_pos > -1)):
         _pprint_elem_content(indent_level, data[:start_pos].strip(), 
                              output=output)
@@ -136,7 +151,8 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
         _pprint_line(indent_level, 
                      data[:end_pos - start_pos], 
                      width=width,
-                     output=output)
+                     output=output,
+                     ignore_contents=ignore_contents)
         data = data[end_pos - start_pos:]
         if not is_stop and not no_indent :
             indent_level = indent_level + indent
@@ -144,7 +160,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
         if not data:
             break
         else:
-            start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
+            start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
     
 
 if __name__ == "__main__":

packages/addons/driver/hdhomerun/source/resources/settings.xml

@@ -11,6 +11,6 @@
   <category label="9000">
     <setting type="sep" />
     <setting id="ENABLE_TUNER_TYPES" type="bool" label="9005" default="true" />
-    <setting label="9010" option="close" type="action" action="RunScript($ID, refresh_tuners)" />
+    <setting label="9010" option="close" type="action" id="refresh_tuners" action="RunScript($CWD/resources/actions.py, refresh_tuners)" />
   </category>
 </settings>

packages/addons/driver/imon-mce/changelog.txt

@@ -1,11 +1,21 @@
+4.3.1
+ fix keymaps path
+
+4.3.0
+ rebuild for addon api bump
+
 4.1.0
  rebuild for addon api bump
+
 4.0.1
  rebuild
+
 4.0.0
   rebuild for OpenELEC-4.0
+
 3.1.1
   rebuild for OpenELEC-3.2
+
 3.0.1
 - bump addon version
 

packages/addons/driver/imon-mce/package.mk

@@ -17,8 +17,8 @@
 ################################################################################
 
 PKG_NAME="imon-mce"
-PKG_VERSION="4.1"
-PKG_REV="0"
+PKG_VERSION="4.3"
+PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="OSS"
 PKG_SITE="http://www.openelec.tv"

packages/addons/driver/imon-mce/source/bin/imon-mce.service

@@ -21,4 +21,4 @@
 . /etc/profile
 
 sleep 1 && \
-ir-keytable -p rc6 -w /etc/rc_keymaps/imon_mce &
+ir-keytable -p rc6 -w /usr/lib/udev/rc_keymaps/imon_mce &

packages/addons/driver/sundtek-mediatv/changelog.txt

@@ -1,3 +1,15 @@
+4.3.4
+  fixed xbmc/kodi rebranding error
+  some fixes
+4.3.3
+  addon transformed to service addon
+  new addon settings option to enable to check for new driver at boot
+4.3.2
+  new addon settings option to enable to update driver from web with latest version
+4.3.1
+  update driver
+4.3.0
+  rebuild for addon api bump
 4.1.5
   dont touch /storage/.profile
 4.1.4

packages/addons/driver/sundtek-mediatv/package.mk

@@ -17,19 +17,19 @@
 ################################################################################
 
 PKG_NAME="sundtek-mediatv"
-PKG_VERSION="4.1"
-PKG_REV="5"
+PKG_VERSION="4.3"
+PKG_REV="4"
 PKG_ARCH="any"
 PKG_LICENSE="nonfree"
 PKG_SITE="http://support.sundtek.com/"
 PKG_URL=""
-PKG_DEPENDS_TARGET="toolchain"
+PKG_DEPENDS_TARGET=""
 PKG_PRIORITY="optional"
 PKG_SECTION="driver/dvb"
 PKG_SHORTDESC="Sundtek USB Stick DVB userspace driver"
 PKG_LONGDESC="Driver for Sundtek MediaTV Pro (DVB-C, DVB-T, AnalogTV, Composite, S-Video, FM-Radio USB Stick) and Sundtek SkyTV Ultimate (DVB-S/S2 USB)."
 PKG_IS_ADDON="yes"
-PKG_ADDON_TYPE="xbmc.python.script"
+PKG_ADDON_TYPE="xbmc.service"
 PKG_AUTORECONF="no"
 
 make_target() {
@@ -47,11 +47,18 @@ make_target() {
       INSTALLER_URL="http://sundtek.de/media/netinst/armsysvhf/installer.tar.gz"
       ;;
   esac
+  
   wget -O installer.tar.gz $INSTALLER_URL
+  
   tar -xzf installer.tar.gz
-  # we run this via wrapper
-  mv opt/bin/mediaclient opt/bin/mediaclient.bin
-  chmod 755 opt/bin/*
+  
+  chmod -R 755 opt/ etc/
+  
+  rm -f  opt/bin/getinput.sh
+  rm -f  opt/bin/lirc.sh
+  rm -fr opt/lib/pm/
+
+  wget -O version.used http://sundtek.de/media/latest.phtml
 }
 
 makeinstall_target() {
@@ -64,4 +71,5 @@ addon() {
   cp -P $PKG_DIR/settings-default.xml $ADDON_BUILD/$PKG_ADDON_ID/
   cp -Pa $PKG_BUILD/opt/bin $ADDON_BUILD/$PKG_ADDON_ID/
   cp -Pa $PKG_BUILD/opt/lib $ADDON_BUILD/$PKG_ADDON_ID/
+  cp $PKG_BUILD/version.used $ADDON_BUILD/$PKG_ADDON_ID/
 }

packages/addons/driver/sundtek-mediatv/settings-default.xml

@@ -17,4 +17,5 @@
   <setting id="DEVICE4_NUM" value="1" />
   <setting id="DEVICE5_IP"  value="" />
   <setting id="DEVICE5_NUM" value="1" />
+  <setting id="CHECK_BOOT" value="false" />
 </settings>

packages/addons/driver/sundtek-mediatv/source/bin/mediaclient

@@ -1,2 +0,0 @@
-#!/bin/sh
-LD_PRELOAD=/storage/.xbmc/addons/driver.dvb.sundtek-mediatv/lib/libmediaclient.so exec mediaclient.bin "$@"

packages/addons/driver/sundtek-mediatv/source/bin/sundtek-mediatv.start

@@ -0,0 +1,247 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+. /etc/profile
+
+net_tuner_num_fix() {
+  local num=$1
+
+  [ -z "$num" ] && num=1
+  num=$(( $num *1 ))
+  [ $num -lt 1 ] && num=1
+  num=$(( $num -1 ))
+  echo $num
+}
+
+SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
+SUNDTEK_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv"
+SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
+
+mkdir -p $SUNDTEK_ADDON_HOME
+
+if [ ! -f "$SUNDTEK_ADDON_HOME/sundtek.conf" ]; then
+  cp $SUNDTEK_ADDON_DIR/config/* $SUNDTEK_ADDON_HOME/
+else
+  # in case of missing entries in addon home's sundtek.conf
+  entry_set="$(grep use_hwpidfilter $SUNDTEK_ADDON_HOME/sundtek.conf 2>/dev/null)"
+  if [ -z "$entry_set" ]; then
+    sed -i 's|^device_attach=.*|# device_attach not used anymore\n\n# enable HW PID filter\nuse_hwpidfilter=off\n\n# enable listening on network\nenablenetwork=off|g' $SUNDTEK_ADDON_HOME/sundtek.conf
+    sed -i 's|^#first_adapter=.*|first_adapter=0|g' $SUNDTEK_ADDON_HOME/sundtek.conf
+
+    sed -i 's|.*network tuner IP address (OpenELEC specific).*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
+    sed -i 's|.*network_tuner_ip=.*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
+  fi
+fi
+
+if [ ! -f "$SUNDTEK_ADDON_SETTINGS" ]; then
+  cp $SUNDTEK_ADDON_DIR/settings-default.xml $SUNDTEK_ADDON_SETTINGS
+fi
+
+[ ! -f $SUNDTEK_ADDON_HOME/rc_key_enter.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_enter $SUNDTEK_ADDON_HOME/rc_key_enter.map
+[ ! -f $SUNDTEK_ADDON_HOME/rc_key_ok.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_ok $SUNDTEK_ADDON_HOME/rc_key_ok.map
+
+mkdir -p /var/config
+cat "$SUNDTEK_ADDON_SETTINGS" | awk -F\" '{print $2"=\""$4"\""}' | sed '/^=/d' > /var/config/sundtek-addon.conf
+. /var/config/sundtek-addon.conf
+
+# check if there is new driver on web
+if [ "$CHECK_BOOT" = "true" ]; then
+  if [ ! -f /var/run/sundtek.checked ]; then
+    # only once after boot
+    touch /var/run/sundtek.checked
+
+(
+    # wait some time before checking
+    sleep 20
+    cd $SUNDTEK_ADDON_DIR
+
+    wget -O version.latest http://sundtek.de/media/latest.phtml
+
+    version_used=$(cat version.used)
+    version_latest=$(cat version.latest)
+    if [ "$version_used" != "$version_latest" ]; then
+      # new version exist
+      kodi-send -a "Notification(Sundtek, \"New driver version exist, update manually\", 4000, $SUNDTEK_ADDON_DIR/icon.png)"
+    fi
+)&
+  fi
+fi
+
+if [ -z "$(pidof mediasrv)" ]; then
+  rm -f /var/log/mediasrv.log
+  rm -f /var/log/mediaclient.log
+
+  SUNDTEK_CONF_TMP=/tmp/sundtek.conf
+  cp $SUNDTEK_ADDON_HOME/sundtek.conf $SUNDTEK_CONF_TMP
+
+  [ -z "$LOWEST_ADAPTER_NUM" ] && LOWEST_ADAPTER_NUM=0
+  sed -i "s|^first_adapter=.*|first_adapter=$LOWEST_ADAPTER_NUM|g" $SUNDTEK_CONF_TMP
+
+  # enable HW PID filter
+  if [ "$ENABLE_HW_PID_FILTER" = "true" ]; then
+    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=on|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=off|g' $SUNDTEK_CONF_TMP
+  fi
+
+  # enable IR receiver
+  if [ "$ENABLE_IR_RECEIVER" = "true" ]; then
+    sed -i 's|^ir_disabled=.*|ir_disabled=0|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^ir_disabled=.*|ir_disabled=1|g' $SUNDTEK_CONF_TMP
+  fi
+
+  if [ "$ALLOW_NET_USE" = "true" ]; then
+    sed -i 's|^enablenetwork=.*|enablenetwork=on|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^enablenetwork=.*|enablenetwork=off|g' $SUNDTEK_CONF_TMP
+  fi
+
+  [ "$DEVICE1_IP" = "0.0.0.0" ] && DEVICE1_IP=""
+  [ "$DEVICE2_IP" = "0.0.0.0" ] && DEVICE2_IP=""
+  [ "$DEVICE3_IP" = "0.0.0.0" ] && DEVICE3_IP=""
+  [ "$DEVICE4_IP" = "0.0.0.0" ] && DEVICE4_IP=""
+  [ "$DEVICE5_IP" = "0.0.0.0" ] && DEVICE5_IP=""
+  DEVICE1_NUM=$(net_tuner_num_fix $DEVICE1_NUM)
+  DEVICE2_NUM=$(net_tuner_num_fix $DEVICE2_NUM)
+  DEVICE3_NUM=$(net_tuner_num_fix $DEVICE3_NUM)
+  DEVICE4_NUM=$(net_tuner_num_fix $DEVICE4_NUM)
+  DEVICE5_NUM=$(net_tuner_num_fix $DEVICE5_NUM)
+
+  if [ "$USE_NET_TUNERS" = "true" -a -n "$DEVICE1_IP" ]; then
+    # delete all network tuner entries
+    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
+    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
+    echo "" >>$SUNDTEK_CONF_TMP
+    # remove empty lines at the end of file
+    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+    # add entries
+    echo -e "\n[NETWORK]" >>$SUNDTEK_CONF_TMP
+    for dev in $(seq 0 $DEVICE1_NUM); do
+      echo "device=$DEVICE1_IP:$dev" >>$SUNDTEK_CONF_TMP
+    done
+    if [ -n "$DEVICE2_IP" ]; then
+      for dev in $(seq 0 $DEVICE2_NUM); do
+        echo "device=$DEVICE2_IP:$dev" >>$SUNDTEK_CONF_TMP
+      done
+      if [ -n "$DEVICE3_IP" ]; then
+        for dev in $(seq 0 $DEVICE3_NUM); do
+          echo "device=$DEVICE3_IP:$dev" >>$SUNDTEK_CONF_TMP
+        done
+        if [ -n "$DEVICE4_IP" ]; then
+          for dev in $(seq 0 $DEVICE4_NUM); do
+            echo "device=$DEVICE4_IP:$dev" >>$SUNDTEK_CONF_TMP
+          done
+          if [ -n "$DEVICE5_IP" ]; then
+            for dev in $(seq 0 $DEVICE5_NUM); do
+              echo "device=$DEVICE5_IP:$dev" >>$SUNDTEK_CONF_TMP
+            done
+          fi
+        fi
+      fi
+    fi
+  else
+    # delete all network tuner entries
+    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
+    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
+    echo "" >>$SUNDTEK_CONF_TMP
+    # remove empty lines at the end of file
+    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+  fi
+
+  if [ "$ENABLE_TUNER_TYPES" = "true" ]; then
+    # get tuner serial numbers
+    SERIALS=$(cat /var/config/sundtek-addon.conf | sed -n 's|^ATTACHED_TUNER_\(.*\)_DVBMODE=.*|\1|gp' | sort | uniq)
+    . /var/config/sundtek-addon.conf
+
+    for SERIAL in $SERIALS; do
+      DVBMODE=$(eval echo \$ATTACHED_TUNER_${SERIAL}_DVBMODE)
+      IRPROT=$(eval echo \$ATTACHED_TUNER_${SERIAL}_IRPROT)
+      KEYMAP=$(eval echo \$ATTACHED_TUNER_${SERIAL}_KEYMAP)
+
+      if [ "$DVBMODE" = "DVB-T" ]; then
+        # only set DVB-T because default is DVB-C (and DVB-S is not set either)
+        DVBMODE="DVBT"
+      else
+        DVBMODE=""
+      fi
+
+      [ "$IRPROT" = "NEC" -o "$IRPROT" = "auto" ] && IRPROT=""
+
+      [ ! -f $KEYMAP ] && KEYMAP=""
+
+      # remove setttings for this tuner
+      awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^ir_protocol=|^rcmap=|^initial_dvb_mode=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-types
+      mv ${SUNDTEK_CONF_TMP}-types $SUNDTEK_CONF_TMP
+      echo "" >>$SUNDTEK_CONF_TMP
+      # remove empty lines at the end of file
+      sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+
+      ADDNEW=true
+      if [ -n "$DVBMODE" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "initial_dvb_mode=$DVBMODE" >>$SUNDTEK_CONF_TMP
+      fi
+      if [ -n "$IRPROT" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "ir_protocol=$IRPROT" >>$SUNDTEK_CONF_TMP
+      fi
+      if [ -n "$KEYMAP" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "rcmap=$KEYMAP" >>$SUNDTEK_CONF_TMP
+      fi
+
+      echo "" >>$SUNDTEK_CONF_TMP
+    done
+  fi
+
+  md5_1=$(md5sum -b $SUNDTEK_CONF_TMP | awk '{print $1}')
+  md5_2=$(md5sum -b $SUNDTEK_ADDON_HOME/sundtek.conf | awk '{print $1}')
+  if [ "$md5_1" != "$md5_2" ]; then
+    # file changed - copy to addon home
+    cp $SUNDTEK_CONF_TMP $SUNDTEK_ADDON_HOME/sundtek.conf
+  fi
+
+  chmod +x $SUNDTEK_ADDON_DIR/bin/*
+  mediasrv --wait-for-devices -p $SUNDTEK_ADDON_DIR/bin -c $SUNDTEK_ADDON_HOME/sundtek.conf -d
+
+  # wait few seconds
+  [ -z "$SETTLE_TIME" ] && SETTLE_TIME=0
+  SETTLE_TIME=$(( $SETTLE_TIME *1 ))
+  if [ $SETTLE_TIME -gt 0 ]; then
+    logger -t Sundtek "### Settle for $SETTLE_TIME sec ###"
+    sleep $SETTLE_TIME
+  fi
+
+  if [ "$RUN_USER_SCRIPT" = "true" -a -f "$SUNDTEK_ADDON_HOME/userscript.sh" ]; then
+    logger -t Sundtek "### Running user script $SUNDTEK_ADDON_HOME/userscript.sh ###"
+    cat $SUNDTEK_ADDON_HOME/userscript.sh | dos2unix >/var/run/sundtek-userscript.sh
+    sh /var/run/sundtek-userscript.sh
+  fi
+
+  # save adapter serial number
+  serial_number_old=$(cat $SUNDTEK_ADDON_HOME/adapters.txt 2>/dev/null)
+  serial_number_new=$(mediaclient -e | awk '/device / {print $0} /SERIAL/ {id=1} /ID:/ {if (id==1) print $2}')
+  if [ "$serial_number_old" != "$serial_number_new" ]; then
+    echo "$serial_number_new" >$SUNDTEK_ADDON_HOME/adapters.txt
+  fi
+fi
+
+logger -t Sundtek "### Sundtek ready ###"

packages/addons/driver/sundtek-mediatv/source/bin/sundtek-mediatv.stop

@@ -18,7 +18,9 @@
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
 
-. config/options $1
+. /etc/profile
 
-mkdir -p $ADDON_BUILD/$PKG_ADDON_ID
-  cp -R $PKG_BUILD/.install_pkg/usr/share/xbmc/addons/$PKG_ADDON_ID/* $ADDON_BUILD/$PKG_ADDON_ID
+ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
+
+logger -t Sundtek "### Sundtek driver stop ###"
+mediaclient --shutdown

packages/addons/driver/sundtek-mediatv/source/bin/sundtek-update-driver.sh

@@ -0,0 +1,119 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+. /etc/profile
+
+SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
+SUNDTEK_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv"
+SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
+
+trap_exit_install() {
+  kodi-send -a "Notification(Sundtek, Something went wrong. Cleaning..., 8000, $SUNDTEK_ADDON_DIR/icon.png)"
+  cd "$SUNDTEK_ADDON_DIR"
+  rm -fr tmp
+  exit 5
+}
+
+# kill process
+systemctl stop driver.dvb.sundtek-mediatv
+killall -9 mediaclient &>/dev/null
+killall -9 mediasrv &>/dev/null
+
+# exit on errors
+set -e
+
+trap trap_exit_install EXIT
+
+cd "$SUNDTEK_ADDON_DIR"
+rm -fr tmp
+mkdir tmp
+cd tmp
+
+logger -t Sundtek "### Starting updating driver ###"
+kodi-send -a "Notification(Sundtek, Starting updating driver, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
+
+wget -O ../version.used http://sundtek.de/media/latest.phtml
+if [ $? -ne 0 ]; then
+  logger -t Sundtek "### Can't get latest version ###"
+  kodi-send -a "Notification(Sundtek, Cant get latest version, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
+  cd ..
+  rm -fr tmp/
+  exit 1
+fi
+
+ARCH=$(sed -n 's|.*\.\([^-]*\)-.*|\1|p' /etc/release | tr -d '\n')
+if [ "$ARCH" = "x86_64" ]; then
+  INSTALLER_URL="http://sundtek.de/media/netinst/64bit/installer.tar.gz"
+elif [ "$ARCH" = "i386" ]; then
+  INSTALLER_URL="http://sundtek.de/media/netinst/32bit/installer.tar.gz"
+elif [ "$ARCH" = "arm" ]; then
+  INSTALLER_URL="http://sundtek.de/media/netinst/armsysvhf/installer.tar.gz"
+else
+  logger -t Sundtek "### Unsupported architecture ###"
+  kodi-send -a "Notification(Sundtek, Unsupported architecture, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
+  cd ..
+  rm -fr tmp
+  exit 2
+fi
+
+logger -t Sundtek "### Downloading driver archive for $ARCH ###"
+kodi-send -a "Notification(Sundtek, Downloading driver archive for $ARCH, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
+wget -O installer.tar.gz $INSTALLER_URL
+if [ $? -ne 0 ]; then
+  logger -t Sundtek "### Archive damaged ###"
+  kodi-send -a "Notification(Sundtek, Download failed, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
+  cd ..
+  rm -fr tmp/
+  exit 3
+fi
+
+logger -t Sundtek "### Extracting archive ###"
+kodi-send -a "Notification(Sundtek, Extracting archive, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
+tar -xzf installer.tar.gz
+if [ $? -ne 0 ]; then
+  logger -t Sundtek "### Archive damaged ###"
+  kodi-send -a "Notification(Sundtek, Archive damaged, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
+  cd ..
+  rm -fr tmp/
+  exit 4
+fi
+
+# fix permissions
+chmod -R 755 opt/ etc/
+
+rm -f  opt/bin/getinput.sh
+rm -f  opt/bin/lirc.sh
+rm -fr opt/lib/pm/
+
+cp -Pa opt/bin/* ../bin/
+cp -Pa opt/lib/* ../lib/
+
+cd ..
+rm -fr tmp
+
+logger -t Sundtek "### Driver update finished ###"
+kodi-send -a "Notification(Sundtek, Driver update finished, 5000, $SUNDTEK_ADDON_DIR/icon.png)"
+kodi-send -a "Notification(Sundtek, Please reboot, 5000, $SUNDTEK_ADDON_DIR/icon.png)"
+
+trap - EXIT
+
+systemctl start driver.dvb.sundtek-mediatv
+
+exit 0

packages/addons/driver/sundtek-mediatv/source/bin/userspace-driver.sh

@@ -2,7 +2,7 @@
 
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2013 Stephan Raue ([email protected])
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -20,223 +20,11 @@
 
 . /etc/profile
 
-# start locking mechanism - allows only one instance to be run at a time
-SUNDTEK_LOCKFILE="/var/lock/userspace-driver-sundtek.lck"
-SUNDTEK_LOCKFD=99
-# obtain an exclusive lock
-exlock() { eval "exec $SUNDTEK_LOCKFD>\"$SUNDTEK_LOCKFILE\""; flock -x $SUNDTEK_LOCKFD; }
-# drop a lock
-unlock() { flock -u $SUNDTEK_LOCKFD; flock -xn $SUNDTEK_LOCKFD && rm -f "$SUNDTEK_LOCKFILE"; }
-# end locking mechanism
+SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
 
-# exclusive lock
-exlock
-
-net_tuner_num_fix() {
-  local num=$1
-
-  [ -z "$num" ] && num=1
-  num=$(( $num *1 ))
-  [ $num -lt 1 ] && num=1
-  num=$(( $num -1 ))
-  echo $num
-}
-
-SUNDTEK_ADDON_DIR="$HOME/.xbmc/addons/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_HOME="$HOME/.xbmc/userdata/addon_data/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
-
-mkdir -p $SUNDTEK_ADDON_HOME
-
-if [ ! -f "$SUNDTEK_ADDON_HOME/sundtek.conf" ]; then
-  cp $SUNDTEK_ADDON_DIR/config/* $SUNDTEK_ADDON_HOME/
+if [ -f $SUNDTEK_ADDON_DIR/lib/libmediaclient.so ]; then
+  logger -t Sundtek "### Preloading library ###"
+  export LD_PRELOAD=$SUNDTEK_ADDON_DIR/lib/libmediaclient.so
 else
-  # in case of missing entries in addon home's sundtek.conf
-  entry_set="$(grep use_hwpidfilter $SUNDTEK_ADDON_HOME/sundtek.conf 2>/dev/null)"
-  if [ -z "$entry_set" ]; then
-    sed -i 's|^device_attach=.*|# device_attach not used anymore\n\n# enable HW PID filter\nuse_hwpidfilter=off\n\n# enable listening on network\nenablenetwork=off|g' $SUNDTEK_ADDON_HOME/sundtek.conf
-    sed -i 's|^#first_adapter=.*|first_adapter=0|g' $SUNDTEK_ADDON_HOME/sundtek.conf
-
-    sed -i 's|.*network tuner IP address (OpenELEC specific).*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
-    sed -i 's|.*network_tuner_ip=.*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
-  fi
+  logger -t Sundtek "### Preloading library doesn't exist ###"
 fi
-
-if [ ! -f "$SUNDTEK_ADDON_SETTINGS" ]; then
-  cp $SUNDTEK_ADDON_DIR/settings-default.xml $SUNDTEK_ADDON_SETTINGS
-fi
-
-[ ! -f $SUNDTEK_ADDON_HOME/rc_key_enter.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_enter $SUNDTEK_ADDON_HOME/rc_key_enter.map
-[ ! -f $SUNDTEK_ADDON_HOME/rc_key_ok.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_ok $SUNDTEK_ADDON_HOME/rc_key_ok.map
-
-mkdir -p /var/config
-cat "$SUNDTEK_ADDON_SETTINGS" | awk -F\" '{print $2"=\""$4"\""}' | sed '/^=/d' > /var/config/sundtek-addon.conf
-. /var/config/sundtek-addon.conf
-
-export LD_PRELOAD=$SUNDTEK_ADDON_DIR/lib/libmediaclient.so
-
-if [ -z "$(pidof mediasrv)" ]; then
-  rm -f /var/log/mediasrv.log
-  rm -f /var/log/mediaclient.log
-
-  SUNDTEK_CONF_TMP=/tmp/sundtek.conf
-  cp $SUNDTEK_ADDON_HOME/sundtek.conf $SUNDTEK_CONF_TMP
-
-  [ -z "$LOWEST_ADAPTER_NUM" ] && LOWEST_ADAPTER_NUM=0
-  sed -i "s|^first_adapter=.*|first_adapter=$LOWEST_ADAPTER_NUM|g" $SUNDTEK_CONF_TMP
-
-  # enable HW PID filter
-  if [ "$ENABLE_HW_PID_FILTER" = "true" ]; then
-    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=on|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=off|g' $SUNDTEK_CONF_TMP
-  fi
-
-  # enable IR receiver
-  if [ "$ENABLE_IR_RECEIVER" = "true" ]; then
-    sed -i 's|^ir_disabled=.*|ir_disabled=0|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^ir_disabled=.*|ir_disabled=1|g' $SUNDTEK_CONF_TMP
-  fi
-
-  if [ "$ALLOW_NET_USE" = "true" ]; then
-    sed -i 's|^enablenetwork=.*|enablenetwork=on|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^enablenetwork=.*|enablenetwork=off|g' $SUNDTEK_CONF_TMP
-  fi
-
-  [ "$DEVICE1_IP" = "0.0.0.0" ] && DEVICE1_IP=""
-  [ "$DEVICE2_IP" = "0.0.0.0" ] && DEVICE2_IP=""
-  [ "$DEVICE3_IP" = "0.0.0.0" ] && DEVICE3_IP=""
-  [ "$DEVICE4_IP" = "0.0.0.0" ] && DEVICE4_IP=""
-  [ "$DEVICE5_IP" = "0.0.0.0" ] && DEVICE5_IP=""
-  DEVICE1_NUM=$(net_tuner_num_fix $DEVICE1_NUM)
-  DEVICE2_NUM=$(net_tuner_num_fix $DEVICE2_NUM)
-  DEVICE3_NUM=$(net_tuner_num_fix $DEVICE3_NUM)
-  DEVICE4_NUM=$(net_tuner_num_fix $DEVICE4_NUM)
-  DEVICE5_NUM=$(net_tuner_num_fix $DEVICE5_NUM)
-
-  if [ "$USE_NET_TUNERS" = "true" -a -n "$DEVICE1_IP" ]; then
-    # delete all network tuner entries
-    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
-    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
-    echo "" >>$SUNDTEK_CONF_TMP
-    # remove empty lines at the end of file
-    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-    # add entries
-    echo -e "\n[NETWORK]" >>$SUNDTEK_CONF_TMP
-    for dev in $(seq 0 $DEVICE1_NUM); do
-      echo "device=$DEVICE1_IP:$dev" >>$SUNDTEK_CONF_TMP
-    done
-    if [ -n "$DEVICE2_IP" ]; then
-      for dev in $(seq 0 $DEVICE2_NUM); do
-        echo "device=$DEVICE2_IP:$dev" >>$SUNDTEK_CONF_TMP
-      done
-      if [ -n "$DEVICE3_IP" ]; then
-        for dev in $(seq 0 $DEVICE3_NUM); do
-          echo "device=$DEVICE3_IP:$dev" >>$SUNDTEK_CONF_TMP
-        done
-        if [ -n "$DEVICE4_IP" ]; then
-          for dev in $(seq 0 $DEVICE4_NUM); do
-            echo "device=$DEVICE4_IP:$dev" >>$SUNDTEK_CONF_TMP
-          done
-          if [ -n "$DEVICE5_IP" ]; then
-            for dev in $(seq 0 $DEVICE5_NUM); do
-              echo "device=$DEVICE5_IP:$dev" >>$SUNDTEK_CONF_TMP
-            done
-          fi
-        fi
-      fi
-    fi
-  else
-    # delete all network tuner entries
-    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
-    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
-    echo "" >>$SUNDTEK_CONF_TMP
-    # remove empty lines at the end of file
-    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-  fi
-
-  if [ "$ENABLE_TUNER_TYPES" = "true" ]; then
-    # get tuner serial numbers
-    SERIALS=$(cat /var/config/sundtek-addon.conf | sed -n 's|^ATTACHED_TUNER_\(.*\)_DVBMODE=.*|\1|gp' | sort | uniq)
-    . /var/config/sundtek-addon.conf
-
-    for SERIAL in $SERIALS; do
-      DVBMODE=$(eval echo \$ATTACHED_TUNER_${SERIAL}_DVBMODE)
-      IRPROT=$(eval echo \$ATTACHED_TUNER_${SERIAL}_IRPROT)
-      KEYMAP=$(eval echo \$ATTACHED_TUNER_${SERIAL}_KEYMAP)
-
-      if [ "$DVBMODE" = "DVB-T" ]; then
-        # only set DVB-T because default is DVB-C (and DVB-S is not set either)
-        DVBMODE="DVBT"
-      else
-        DVBMODE=""
-      fi
-
-      [ "$IRPROT" = "NEC" -o "$IRPROT" = "auto" ] && IRPROT=""
-
-      [ ! -f $KEYMAP ] && KEYMAP=""
-
-      # remove setttings for this tuner
-      awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^ir_protocol=|^rcmap=|^initial_dvb_mode=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-types
-      mv ${SUNDTEK_CONF_TMP}-types $SUNDTEK_CONF_TMP
-      echo "" >>$SUNDTEK_CONF_TMP
-      # remove empty lines at the end of file
-      sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-
-      ADDNEW=true
-      if [ -n "$DVBMODE" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "initial_dvb_mode=$DVBMODE" >>$SUNDTEK_CONF_TMP
-      fi
-      if [ -n "$IRPROT" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "ir_protocol=$IRPROT" >>$SUNDTEK_CONF_TMP
-      fi
-      if [ -n "$KEYMAP" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "rcmap=$KEYMAP" >>$SUNDTEK_CONF_TMP
-      fi
-
-      echo "" >>$SUNDTEK_CONF_TMP
-    done
-  fi
-
-  md5_1=$(md5sum -b $SUNDTEK_CONF_TMP | awk '{print $1}')
-  md5_2=$(md5sum -b $SUNDTEK_ADDON_HOME/sundtek.conf | awk '{print $1}')
-  if [ "$md5_1" != "$md5_2" ]; then
-    # file changed - copy to addon home
-    cp $SUNDTEK_CONF_TMP $SUNDTEK_ADDON_HOME/sundtek.conf
-  fi
-
-  mediasrv --wait-for-devices -p $SUNDTEK_ADDON_DIR/bin -c $SUNDTEK_ADDON_HOME/sundtek.conf -d
-
-  # wait few seconds
-  [ -z "$SETTLE_TIME" ] && SETTLE_TIME=0
-  SETTLE_TIME=$(( $SETTLE_TIME *1 ))
-  if [ $SETTLE_TIME -gt 0 ]; then
-    logger -t Sundtek "### Settle for $SETTLE_TIME sec ###"
-    sleep $SETTLE_TIME
-  fi
-
-  if [ "$RUN_USER_SCRIPT" = "true" -a -f "$SUNDTEK_ADDON_HOME/userscript.sh" ]; then
-    logger -t Sundtek "### Running user script $SUNDTEK_ADDON_HOME/userscript.sh ###"
-    cat $SUNDTEK_ADDON_HOME/userscript.sh | dos2unix >/var/run/sundtek-userscript.sh
-    sh /var/run/sundtek-userscript.sh
-  fi
-(
-  # save adapter serial number in background
-  sleep 5
-  serial_number_old=$(cat $SUNDTEK_ADDON_HOME/adapters.txt 2>/dev/null)
-  serial_number_new=$(mediaclient.bin -e | awk '/device / {print $0} /ID:/ {print $2}')
-  if [ "$serial_number_old" != "$serial_number_new" ]; then
-    echo "$serial_number_new" >$SUNDTEK_ADDON_HOME/adapters.txt
-  fi
-)&
-fi
-
-logger -t Sundtek "### Sundtek ready ###"
-
-# unlock the lock
-unlock

packages/addons/driver/sundtek-mediatv/source/default.py

@@ -15,22 +15,3 @@
 #  You should have received a copy of the GNU General Public License
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
-
-import os
-import sys
-import xbmcaddon
-
-__settings__      = xbmcaddon.Addon(id = 'driver.dvb.sundtek-mediatv')
-__cwd__           = __settings__.getAddonInfo('path')
-__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
-__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
-
-__mediaclient__   = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'mediaclient.bin'))
-__ld_preload__    = xbmc.translatePath(os.path.join(__cwd__, 'lib', 'libmediaclient.so'))
-__mediaclient_e__ = 'LD_PRELOAD=' + __ld_preload__ + ' ' + __mediaclient__ + ' -e'
-
-if __name__ == "__main__" and len(sys.argv) == 2 and sys.argv[1] == 'refresh_tuners':
-  sys.path.append(__resources_lib__)
-  from functions import refresh_sundtek_tuners
-  refresh_sundtek_tuners(__settings_xml__, __mediaclient_e__)
-  __settings__.openSettings()

packages/addons/driver/sundtek-mediatv/source/resources/actions.py

@@ -0,0 +1,45 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+import os
+import sys
+import subprocess
+import xbmcaddon
+
+__settings__      = xbmcaddon.Addon(id = 'driver.dvb.sundtek-mediatv')
+__cwd__           = __settings__.getAddonInfo('path')
+__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
+__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
+
+__mediaclient__   = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'mediaclient'))
+__mediaclient_e__ = __mediaclient__ + ' -e'
+__update_sh__     = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'sundtek-update-driver.sh'))
+
+if len(sys.argv) == 2:
+  if sys.argv[1] == 'refresh_tuners':
+    print "sundtek refresh tuners"
+    sys.path.append(__resources_lib__)
+    from functions import refresh_sundtek_tuners
+    refresh_sundtek_tuners(__settings_xml__, __mediaclient_e__)
+    __settings__.openSettings()
+  elif sys.argv[1] == 'update_driver':
+    print "sundtek update driver"
+    proc = subprocess.Popen([__update_sh__], shell = True)
+    return_code = proc.wait()
+    print "sundtek update driver return value " + str(return_code)
+    __settings__.openSettings()

packages/addons/driver/sundtek-mediatv/source/resources/language/English/strings.xml

@@ -27,4 +27,8 @@
   <string id="9010">Refresh tuners... (press me)</string>
   <string id="9020">    IR protocol</string>
   <string id="9030">    keymap filename</string>
+
+  <string id="3000">Driver</string>
+  <string id="3020">Check for new driver version at boot</string>
+  <string id="3010">Update from web... (press me)</string>
 </strings>

packages/addons/driver/sundtek-mediatv/source/resources/lib/functions.py

@@ -1,6 +1,6 @@
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2013 Stephan Raue ([email protected])
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -22,7 +22,7 @@ import shutil
 import xmlpp
 from xml.dom import minidom
 
-__sundtek_userspace__ = '/storage/.xbmc/userdata/addon_data/driver.dvb.sundtek-mediatv/'
+__sundtek_userspace__ = '/storage/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv/'
 
 ######################################################################################################
 # backup setting.xml file only if backup doesn't exist

packages/addons/driver/sundtek-mediatv/source/resources/lib/xmlpp.py

@@ -37,36 +37,39 @@ def _usage(this_file):
     return """SYNOPSIS: pretty print an XML document
 USAGE: python %s <filename> \n""" % this_file
 
-def _pprint_line(indent_level, line, width=100, output=_sys.stdout):
+def _pprint_line(indent_level, line, width=100, output=_sys.stdout, ignore_contents = False):
     if line.strip():
         start = ""
         number_chars = 0
         for l in range(indent_level):
             start = start + " "
             number_chars = number_chars + 1
-        try:
-            elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
-            elem_finished = _re.findall("([?|\]\]/]*\>)", line)[0] 
-            #should not have *
-            attrs = _re.findall("(\S*?\=\".*?\")", line)
-            output.write(start + elem_start)
-            number_chars = len(start + elem_start)
-            for attr in attrs:
-                if (attrs.index(attr) + 1) == len(attrs):
-                    number_chars = number_chars + len(elem_finished)
-                if (number_chars + len(attr) + 1) > width:
-                    output.write("\n")
-                    for i in range(len(start + elem_start) + 1):
+        if not ignore_contents:
+            try:
+                elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
+                elem_finished = _re.findall("([?|\]\]/|\-\-]*\>)", line)[0] 
+                #should not have *
+                attrs = _re.findall("(\S*?\=\".*?\")", line)
+                output.write(start + elem_start)
+                number_chars = len(start + elem_start)
+                for attr in attrs:
+                    if (attrs.index(attr) + 1) == len(attrs):
+                        number_chars = number_chars + len(elem_finished)
+                    if (number_chars + len(attr) + 1) > width:
+                        output.write("\n")
+                        for i in range(len(start + elem_start) + 1):
+                            output.write(" ")
+                        number_chars = len(start + elem_start) + 1 
+                    else:
                         output.write(" ")
-                    number_chars = len(start + elem_start) + 1 
-                else:
-                    output.write(" ")
-                    number_chars = number_chars + 1
-                output.write(attr)
-                number_chars = number_chars + len(attr)
-            output.write(elem_finished + "\n")
-        except IndexError:
-            #give up pretty print this line
+                        number_chars = number_chars + 1
+                    output.write(attr)
+                    number_chars = number_chars + len(attr)
+                output.write(elem_finished + "\n")
+            except IndexError:
+                #give up pretty print this line
+                output.write(start + line + "\n")
+        else:
             output.write(start + line + "\n")
                 
 
@@ -80,7 +83,8 @@ def _get_next_elem(data):
     start_pos = data.find("<")
     end_pos = data.find(">") + 1
     retval = data[start_pos:end_pos]
-    stopper = retval.rfind("/") 
+    stopper = retval.rfind("/")
+    ignore_contents = False
     if stopper < retval.rfind("\""):
         stopper = -1
     single = (stopper > -1 and ((retval.find(">") - stopper) < (stopper - retval.find("<"))))
@@ -89,11 +93,19 @@ def _get_next_elem(data):
     ignore_question =  retval.find("<?") > -1
 
     if ignore_excl:
+        ignore_contents = True
         cdata = retval.find("<![CDATA[") > -1
         if cdata:
             end_pos = data.find("]]>")
             if end_pos > -1:
                 end_pos = end_pos + len("]]>")
+                stopper = end_pos
+        else:
+            end_pos = data.find("-->")
+            if end_pos > -1:
+                end_pos = end_pos + len("-->")
+                stopper = end_pos
+        retval = data[start_pos:end_pos]
 
     elif ignore_question:
         end_pos = data.find("?>") + len("?>")
@@ -101,11 +113,12 @@ def _get_next_elem(data):
     
     no_indent = ignore or single
 
-    #print retval, end_pos, start_pos, stopper > -1, no_indent
+    
     return start_pos, \
            end_pos, \
            stopper > -1, \
-           no_indent
+           no_indent, \
+           ignore_contents
 
 def get_pprint(xml, indent=4, width=80):
     """Returns the pretty printed xml """
@@ -116,6 +129,8 @@ def get_pprint(xml, indent=4, width=80):
             self.output += string
     out = out()
     pprint(xml, output=out, indent=indent, width=width)
+    
+
 
     return out.output
 
@@ -126,7 +141,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
     Use indent to select indentation level. Default is 4   """
     data = xml
     indent_level = 0
-    start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
+    start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
     while ((start_pos > -1 and end_pos > -1)):
         _pprint_elem_content(indent_level, data[:start_pos].strip(), 
                              output=output)
@@ -136,7 +151,8 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
         _pprint_line(indent_level, 
                      data[:end_pos - start_pos], 
                      width=width,
-                     output=output)
+                     output=output,
+                     ignore_contents=ignore_contents)
         data = data[end_pos - start_pos:]
         if not is_stop and not no_indent :
             indent_level = indent_level + indent
@@ -144,7 +160,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
         if not data:
             break
         else:
-            start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
+            start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
     
 
 if __name__ == "__main__":

packages/addons/driver/sundtek-mediatv/source/resources/settings.xml

@@ -27,6 +27,11 @@
   <category label="9000">
     <setting type="sep" />
     <setting id="ENABLE_TUNER_TYPES" type="bool" label="9005" default="true" />
-    <setting label="9010" option="close" type="action" action="RunScript($ID, refresh_tuners)" />
+    <setting label="9010" option="close" type="action" id="refresh_tuners" action="RunScript($CWD/resources/actions.py, refresh_tuners)" />
+  </category>
+  <category label="3000">
+    <setting type="sep" />
+    <setting id="CHECK_BOOT" type="bool" label="3020" default="false" />
+    <setting label="3010" option="close" type="action" id="update_driver" action="RunScript($CWD/resources/actions.py, update_driver)" />
   </category>
 </settings>

packages/addons/driver/sundtek-mediatv/source/sleep.d/99-sundtek-mediatv.power

@@ -25,9 +25,10 @@ oe_setup_addon driver.dvb.sundtek-mediatv
 if [ "$SUSPEND_DRIVER" = "true" ]; then
   case "$1" in
     pre)
-      killall -9 mediasrv &>/dev/null
+      systemctl stop driver.dvb.sundtek-mediatv.service
       ;;
     post)
+    	systemctl start driver.dvb.sundtek-mediatv.service
       ;;
   esac
 fi

packages/addons/driver/sundtek-mediatv/source/system.d/driver.dvb.sundtek-mediatv.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Sundtek driver service
+After=network.target
+
+[Service]
+Type=oneshot
+ExecStart=-/bin/sh -c "exec sh /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/sundtek-mediatv.start"
+ExecStop=-/bin/sh -c "exec sh /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/sundtek-mediatv.stop"
+RemainAfterExit=yes
+
+[Install]
+WantedBy=kodi.target

packages/addons/repository/repository.unofficial.addon.pro/changelog.txt

@@ -1,3 +1,9 @@
+4.3.3
+- rebuild
+
+4.3.2
+- rebuild for addon api bump
+
 4.1.2
 - fix typo in repository name
 

packages/addons/repository/repository.unofficial.addon.pro/package.mk

@@ -19,8 +19,8 @@
 ################################################################################
 
 PKG_NAME="repository.unofficial.addon.pro"
-PKG_VERSION="4.1.2"
-PKG_REV="2"
+PKG_VERSION="4.3"
+PKG_REV="4"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://unofficial.addon.pro"
@@ -41,7 +41,9 @@ PKG_MAINTAINER="unofficial.addon.pro"
 make_target() {
   $SED -e "s|@ADDON_VERSION@|$ADDON_VERSION|g" \
      -e "s|@PROJECT@|$PROJECT|g" \
-     -e "s|@ARCH@|$ARCH|g" \
+     -e "s|@ARCH@|$TARGET_ARCH|g" \
+     -e "s|@PKG_VERSION@|$PKG_VERSION|g" \
+     -e "s|@PKG_REV@|$PKG_REV|g"\
   -i addon.xml
 }
 

packages/addons/repository/repository.unofficial.addon.pro/sources/addon.xml

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <addon id="repository.unofficial.addon.pro"
-                name="Unofficial [COLOR FF757677]Open[/COLOR][COLOR FF8ABEE2]ELEC[/COLOR] Mediacenter OS Add-ons"
-                version="4.1.2"
+                name="Unofficial [COLOR FF757677]Open[/COLOR][COLOR FF8ABEE2]ELEC[/COLOR] (@PROJECT@/@ARCH@) Add-ons"
+                version="@PKG_VERSION@.@PKG_REV@"
                 provider-name="unofficial.addon.pro">
         <extension point="xbmc.addon.repository"
                 name="Unofficial OpenELEC.tv Add-on Repository">
@@ -12,7 +12,10 @@
         <extension point="xbmc.addon.metadata">
                 <summary>Unofficial addon repository for OpenELEC</summary>
                 <description>
-[COLOR orange]Use with care. There will be NO end user support for addons in this repository[/COLOR]
+[COLOR red]=== BIG FAT WARNING ===[/COLOR]
+Use this repository at your own risk.
+If your house gets burned, it's your fault, not ours.
+We give no guarantee. We give no support.
                 </description>
                 <disclaimer>This is an unofficial addon repository. please don't ask for support in openelec forum / irc channel</disclaimer>
                 <platform>all</platform>

packages/addons/service/multimedia/boblightd/changelog.txt

@@ -1,3 +1,12 @@
+4.3.5
+- added boblight-aml
+
+4.3.4
+- update to kodi
+
+4.3.0
+- rebuild for addon api bump
+
 4.1.2
 - rebuild for xlib changes
 

packages/addons/service/multimedia/boblightd/package.mk

@@ -18,7 +18,7 @@
 
 PKG_NAME="boblightd"
 PKG_VERSION="478"
-PKG_REV="2"
+PKG_REV="5"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://code.google.com/p/boblight"
@@ -39,10 +39,10 @@ if [ "$DISPLAYSERVER" = "x11" ] ; then
 fi
 
 if [ "$OPENGL_SUPPORT" = "yes" ] ; then
-  PKG_DEPENDS_TARGET="$PKG_DEPENDS_TARGET Mesa glu"
+  PKG_DEPENDS_TARGET="$PKG_DEPENDS_TARGET mesa glu"
 fi
 
-if [ ! "$OPENGL" = "Mesa" ]; then
+if [ "$OPENGL" = "no" ]; then
   EXTRAOPTS="--without-opengl"
 fi
 
@@ -63,6 +63,7 @@ addon() {
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/bin
   cp -P $PKG_BUILD/.$TARGET_NAME/src/boblightd $ADDON_BUILD/$PKG_ADDON_ID/bin
   cp -P $PKG_BUILD/.$TARGET_NAME/src/boblight-constant $ADDON_BUILD/$PKG_ADDON_ID/bin
+  cp -P $PKG_BUILD/.$TARGET_NAME/src/boblight-aml $ADDON_BUILD/$PKG_ADDON_ID/bin
   if [ "$DISPLAYSERVER" = "x11" ] ; then
     cp -P $PKG_BUILD/.$TARGET_NAME/src/boblight-X11 $ADDON_BUILD/$PKG_ADDON_ID/bin
   fi

packages/addons/service/multimedia/boblightd/patches/boblightd-2.0.5-add_aml_client.patch

@@ -0,0 +1,632 @@
+diff --git a/src/Makefile.am b/src/Makefile.am
+index 9ba5381..c5a4dc6 100644
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -7,6 +7,7 @@ AM_CFLAGS =\
+ 	 -g
+ 
+ bin_PROGRAMS = boblightd \
++	boblight-aml \
+ 	boblight-constant
+         
+ 
+@@ -19,6 +20,11 @@ endif
+ 
+ endif
+ 
++boblight_aml_SOURCES  = clients/boblight-aml/boblight-aml.cpp
++boblight_aml_SOURCES += clients/boblight-aml/flagmanager-aml.cpp
++boblight_aml_SOURCES += clients/flagmanager.cpp
++boblight_aml_SOURCES += util/misc.cpp
++
+ boblight_v4l_SOURCES = \
+ 	clients/boblight-v4l/boblight-v4l.cpp \
+ 	clients/boblight-v4l/flagmanager-v4l.cpp \
+diff -urPp src/clients/boblight-aml.cpp src/clients/boblight-aml/boblight-aml.cpp
+--- /dev/null	Thu Jan  1 00:00:00 1970
++++ b/src/clients/boblight-aml/boblight-aml.cpp	Thu Jan 15 10:24:16 2015
+@@ -0,0 +1,491 @@
++/*
++ * boblight
++ * Copyright (C) Bob  2009 
++ * 
++ * boblight is free software: you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation, either version 3 of the License, or
++ * (at your option) any later version.
++ * 
++ * boblight is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
++ * See the GNU General Public License for more details.
++ * 
++ * You should have received a copy of the GNU General Public License along
++ * with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define BOBLIGHT_DLOPEN
++#include "lib/boblight.h"
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <unistd.h>
++#include <signal.h>
++#include <algorithm>
++
++#include <fcntl.h>
++#include <errno.h>
++#include <sys/stat.h>
++#include <sys/poll.h>
++#include <sys/types.h>
++#include <sys/time.h>
++#include <sys/ioctl.h>
++
++#include "config.h"
++#include "util/misc.h"
++#include "util/timeutils.h"
++#include "flagmanager-aml.h"
++
++using namespace std;
++
++//from linux/amlogic/amports/amvideocap.h
++#define AMVIDEOCAP_IOC_MAGIC 'V'
++#define AMVIDEOCAP_IOW_SET_WANTFRAME_WIDTH      _IOW(AMVIDEOCAP_IOC_MAGIC, 0x02, int)
++#define AMVIDEOCAP_IOW_SET_WANTFRAME_HEIGHT     _IOW(AMVIDEOCAP_IOC_MAGIC, 0x03, int)
++
++
++// helper class - tries to load the "movie" settings from the script.xbmc.boblight addon
++// and pass them to the boblight-aml client
++class CBoblightAddonSettings
++{
++  public:
++    CBoblightAddonSettings() : m_bobdisable(false), m_settingsLoaded(false)
++    { 
++      m_settingsLoaded = loadBoblightAddonSettings();
++    }
++
++    std::string getBoblightClientCmdLine()
++    {
++      std::string cmdLine = "";
++      //convert bool string to lowercase
++      transform(m_interpolation.begin(), m_interpolation.end(), m_interpolation.begin(), ::tolower);
++
++      cmdLine += "-s " + m_ip + ":" + m_port;
++      cmdLine += " -o autospeed=" + m_autospeed;
++      cmdLine += " -o interpolation=" + m_interpolation;
++      cmdLine += " -o saturation=" + m_saturation;
++      cmdLine += " -o speed=" + m_speed;
++      cmdLine += " -o threshold=" + m_threshold;
++      cmdLine += " -o value=" + m_value;
++      return cmdLine;
++    }
++
++    bool m_bobdisable;
++    bool m_settingsLoaded;
++    std::string m_ip;
++    std::string m_port;
++    std::string m_autospeed;
++    std::string m_interpolation;
++    std::string m_saturation;
++    std::string m_speed;
++    std::string m_threshold;
++    std::string m_value;
++
++  private:
++    #define SETTINGS_ATTR_BOBDISABLE     "bobdisable"
++    #define SETTINGS_ATTR_IP             "hostip"
++    #define SETTINGS_ATTR_PORT           "hostport"
++    #define SETTINGS_ATTR_AUTOSPEED      "movie_autospeed"
++    #define SETTINGS_ATTR_INTERPOLATION  "movie_interpolation"
++    #define SETTINGS_ATTR_SATURATION     "movie_saturation"
++    #define SETTINGS_ATTR_SPEED          "movie_speed"
++    #define SETTINGS_ATTR_THRESHOLD      "movie_threshold"
++    #define SETTINGS_ATTR_VALUE          "movie_value"
++    #define KODI_HOME_ENV_VAR            "HOME"
++
++    bool loadBoblightAddonSettings()
++    {
++      bool ret = false;
++      char *kodiHome = getenv(KODI_HOME_ENV_VAR);
++      //fallback to custom settings file in case boblight addon is not installed
++      std::string settingsFile = "/storage/boblight-aml.xml";
++
++      if (kodiHome != NULL)
++      {
++        settingsFile = std::string(kodiHome) + "/.kodi/userdata/addon_data/script.xbmc.boblight/settings.xml";
++      }
++
++      FILE *fd = fopen(settingsFile.c_str(), "r");
++
++      if (fd != NULL)
++      {
++        fseek(fd, 0, SEEK_END);
++        size_t fileSize = ftell(fd);
++        fseek(fd, 0, SEEK_SET);
++        if (fileSize > 0)
++        {
++          if (fileSize > 32000)//read 16k max - there shouldn't be a bigger settings.xml from boblight [tm]
++            fileSize = 32000;
++          char *xmlBuffer = new char[fileSize];
++          size_t readCount = fread(xmlBuffer, fileSize, 1, fd);
++          fclose(fd);
++
++          if (readCount == 1)
++          {
++            parseBoblightSettings(std::string(xmlBuffer));
++            ret = true;
++          }
++          else
++          {
++            fprintf(stderr, "Failed reading boblight addon settings.xml");
++          }
++          delete[] xmlBuffer;
++        }
++      }
++      return ret;
++    }
++
++    void parseBoblightSettings(std::string xmlBuffer)
++    {
++      std::string settings_bobdisable_str;
++      settings_bobdisable_str = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_BOBDISABLE);
++      if (settings_bobdisable_str == "true" || settings_bobdisable_str == "True")
++        m_bobdisable = true;
++
++      m_ip = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_IP);
++      m_port = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_PORT);
++      m_autospeed = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_AUTOSPEED);
++      m_interpolation = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_INTERPOLATION);
++      m_saturation = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_SATURATION);
++      m_speed = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_SPEED);
++      m_threshold = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_THRESHOLD);
++      m_value = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_VALUE);
++    }
++
++    std::string getValueFromXmlBuffer(const std::string &xmlBuffer, const char* xmlAttribute)
++    {
++      size_t strPos = 0;
++      std::string valueStr;
++
++      // each line in the xml looks like this:
++      // <setting id="movie_value" value="1.000006" />
++      // find the attribute
++      if ((strPos = xmlBuffer.find(xmlAttribute)) != std::string::npos)
++      {
++        size_t strPos2 = 0;
++        // from movie_value" value="1.000006" /> look for "value"
++        if ((strPos2 = xmlBuffer.find("value", strPos)) != std::string::npos)
++        {
++          size_t strPos3 = 0;
++          // from value="1.000006" /> look for "="
++          if ((strPos3 = xmlBuffer.find("=", strPos2)) != std::string::npos)
++          {
++            //extract the value - strPos3 points to ="1.000006"
++            int valueOffset = 1; //skip the "="
++            if (xmlBuffer[strPos3 + valueOffset] == '"')
++              valueOffset++;//skip " if needed
++            int strLen = 0;
++            do
++            {
++              // value stops with " or space
++              if (xmlBuffer[strPos3 + valueOffset + strLen] == '"' ||
++                xmlBuffer[strPos3 + valueOffset + strLen] == ' ')
++                break;
++              strLen++;
++            } while (strLen < 20);// no insane xml garbage ...
++
++            valueStr = xmlBuffer.substr(strPos3 + valueOffset, strLen);
++          }
++        }
++      }
++      return valueStr;
++    }
++};
++
++struct aml_snapshot_t {
++  unsigned int  dst_width;
++  unsigned int  dst_height;
++  unsigned int  dst_stride;
++  unsigned int  dst_size;
++  void         *dst_vaddr;
++};
++
++volatile bool g_stop = false;
++CFlagManagerAML g_flagmanager;
++/*********************************************************
++ *********************************************************/
++static void SignalHandler(int signum)
++{
++  if (signum == SIGTERM)
++  {
++    fprintf(stderr, "caught SIGTERM\n");
++    g_stop = true;
++  }
++  else if (signum == SIGINT)
++  {
++    fprintf(stderr, "caught SIGTERM\n");
++    g_stop = true;
++  }
++}
++
++#define VIDEO_PATH       "/dev/amvideo"
++#define AMSTREAM_IOC_MAGIC  'S'
++#define AMSTREAM_IOC_GET_VIDEO_DISABLE  _IOR(AMSTREAM_IOC_MAGIC, 0x48, unsigned long)
++static int amvideo_utils_video_playing()
++{
++  int video_fd;
++  int video_disable;
++
++  video_fd = open(VIDEO_PATH, O_RDWR);
++  if (video_fd < 0) {
++    return -1;
++  }
++
++  ioctl(video_fd, AMSTREAM_IOC_GET_VIDEO_DISABLE, &video_disable);
++  if (video_disable)
++  {
++    close(video_fd);
++    return 1;
++  }
++
++  close(video_fd);
++
++//  fprintf(stderr, "pos x %d y %d w %d h %d\n",snapshot.src_x, snapshot.src_y,snapshot.src_width,snapshot.src_height);
++  return 0;
++}
++
++static int capture_frame(int fd, aml_snapshot_t &snapshot)
++{
++  int ret = 0;
++  
++  ssize_t readResult = pread(fd, snapshot.dst_vaddr, snapshot.dst_size, 0);
++
++  if (readResult < snapshot.dst_size)
++  {
++    fprintf(stderr, "frame read returned %d\n", readResult);
++  }
++  //fprintf(stderr, "requ: %d read %d \n", snapshot.dst_size, readResult);
++  fprintf(stderr, ".");
++  return ret;
++}
++
++static int configure_capture(int fd, aml_snapshot_t &snapshot)
++{
++  int ret = 0;
++  int ioctlret = 0;
++
++  if ((ioctlret = ioctl(fd, AMVIDEOCAP_IOW_SET_WANTFRAME_WIDTH, snapshot.dst_width)) != 0)
++  {
++    ret = 2;
++    fprintf(stderr, "Error setting frame width (ret: %d errno: %d)\n", ioctlret, errno);
++  }
++    
++  
++  if ((ioctlret = ioctl(fd, AMVIDEOCAP_IOW_SET_WANTFRAME_HEIGHT, snapshot.dst_height)) != 0)
++  {
++    ret = 3;
++    fprintf(stderr, "Error setting frame height (ret: %d errno: %d)\n", ioctlret, errno);
++  }
++
++  return ret;
++}
++
++static void frameToboblight(void *boblight, uint8_t* outputptr, int w, int h, int stride)
++{
++  if (!boblight)
++  {
++    fprintf(stderr, "no boblight\n");
++    return;
++  }
++  if (!outputptr)
++  {
++    fprintf(stderr, "no outputptr\n");
++    return;
++  }
++  //read out pixels and hand them to libboblight
++  uint8_t* buffptr;
++  for (int y = h; y > 0; y--) {
++    buffptr = outputptr + stride * y;
++    for (int x = 0; x < w; x++) {
++      int rgb[3];
++      rgb[2] = *(buffptr++);
++      rgb[1] = *(buffptr++);
++      rgb[0] = *(buffptr++);
++
++      //fprintf(stdout, "frameToboblight: x(%d), y(%d)\n", x, y);
++
++      boblight_addpixelxy(boblight, x, y, rgb);
++    }
++  }
++}
++
++static int Run(void* boblight)
++{
++  int snapshot_fd = -1;               
++  aml_snapshot_t aml_snapshot = {0};
++  int lastPriority = 255;
++
++  aml_snapshot.dst_width  = 160;
++  aml_snapshot.dst_height = 160;
++
++  // calc stride, size and alloc mem
++  aml_snapshot.dst_stride = aml_snapshot.dst_width  * 3;
++  aml_snapshot.dst_size   = aml_snapshot.dst_stride * aml_snapshot.dst_height;
++  aml_snapshot.dst_vaddr  = calloc(aml_snapshot.dst_size, 1);
++
++  fprintf(stdout, "Connection to boblightd config: width(%d), height(%d)\n",
++    aml_snapshot.dst_width, aml_snapshot.dst_height);
++  //tell libboblight how big our image is
++  boblight_setscanrange(boblight, (int)aml_snapshot.dst_width, (int)aml_snapshot.dst_height);
++
++  while(!g_stop)
++  {
++    int64_t bgn = GetTimeUs();
++
++    if (snapshot_fd == -1) {
++      snapshot_fd = open(g_flagmanager.m_device.c_str(), O_RDWR, 0);
++
++      if (snapshot_fd == -1) {
++        sleep(1);
++        continue;
++      } else {
++        fprintf(stdout, "snapshot_fd(%d) \n", snapshot_fd);
++      }
++    }
++
++    // match source ratio if possible
++    if (amvideo_utils_video_playing() != 0) {
++      if ( lastPriority != 255)
++      {
++        boblight_setpriority(boblight, 255);
++        lastPriority = 255;
++      }
++      sleep(1);
++      continue;
++    }
++
++    if (configure_capture(snapshot_fd, aml_snapshot) == 0)
++    {
++      if (capture_frame(snapshot_fd, aml_snapshot) == 0)
++      {
++        // image to boblight convert.
++        frameToboblight(boblight, (uint8_t*)aml_snapshot.dst_vaddr,
++        aml_snapshot.dst_width, aml_snapshot.dst_height, aml_snapshot.dst_stride);
++  
++        if (lastPriority != g_flagmanager.m_priority)
++        {
++          boblight_setpriority(boblight, g_flagmanager.m_priority);
++          lastPriority = g_flagmanager.m_priority;
++        }
++        if (!boblight_sendrgb(boblight, 1, NULL))
++        {
++          // some error happened, probably connection broken, so bitch and try again
++          PrintError(boblight_geterror(boblight));
++          boblight_destroy(boblight);
++          continue;
++        }
++      }
++      else
++      {
++        fprintf(stdout, "nap time\n");
++        sleep(1);
++      }
++    }
++    int64_t end = GetTimeUs();
++    float calc_time_ms = (float)(end - bgn) / 1000.0;
++    // throttle to 100ms max cycle rate
++    calc_time_ms -= 100.0;
++    if ((int)calc_time_ms < 0)
++      usleep((int)(-calc_time_ms * 1000));
++  }
++
++  // last image is black
++  boblight_setpriority(boblight, 255);
++  boblight_destroy(boblight);
++  close(snapshot_fd);
++  return 0;
++}
++
++/*********************************************************
++ *********************************************************/
++int main(int argc, char *argv[])
++{
++  //load the boblight lib, if it fails we get a char* from dlerror()
++  const char* boblight_error = boblight_loadlibrary(NULL);
++  if (boblight_error)
++  {
++    PrintError(boblight_error);
++    return 1;
++  }
++
++  //try to parse the flags and bitch to stderr if there's an error
++  try {
++    g_flagmanager.ParseFlags(argc, argv);
++  }
++  catch (string error) {
++    PrintError(error);
++    g_flagmanager.PrintHelpMessage();
++    return 1;
++  }
++  
++  if (g_flagmanager.m_printhelp) {
++    g_flagmanager.PrintHelpMessage();
++    return 1;
++  }
++
++  if (g_flagmanager.m_printboblightoptions) {
++    g_flagmanager.PrintBoblightOptions();
++    return 1;
++  }
++  
++  // check if we only should generate a cmdline based
++  // on settings from possible found boblight addon
++  if (g_flagmanager.generateCmdLine)
++  {
++    CBoblightAddonSettings settings;
++    string cmdLine = "-p 100"; //default cmdline just contains priority 100
++
++    if (settings.m_settingsLoaded)
++      cmdLine += " " + settings.getBoblightClientCmdLine();
++    fprintf(stdout, "%s", cmdLine.c_str());
++    return 0;//exit
++  }
++
++  fprintf(stderr, "Using device: %s \n", g_flagmanager.m_device.c_str());
++
++  //set up signal handlers
++  signal(SIGINT,  SignalHandler);
++  signal(SIGTERM, SignalHandler);
++
++  //keep running until we want to quit
++  while(!g_stop) {
++    //init boblight
++    void* boblight = boblight_init();
++
++    fprintf(stdout, "Connecting to boblightd(%p)\n", boblight);
++    
++    //try to connect, if we can't then bitch to stderr and destroy boblight
++    if (!boblight_connect(boblight, g_flagmanager.m_address, g_flagmanager.m_port, 5000000) ||
++        !boblight_setpriority(boblight, 255)) {
++      PrintError(boblight_geterror(boblight));
++      fprintf(stdout, "Waiting 10 seconds before trying again\n");
++      boblight_destroy(boblight);
++      sleep(2);
++      continue;
++    }
++
++    fprintf(stdout, "Connection to boblightd opened\n");
++
++    //try to parse the boblight flags and bitch to stderr if we can't
++    try {
++      g_flagmanager.ParseBoblightOptions(boblight);
++    }
++    catch (string error) {
++      PrintError(error);
++      return 1;
++    }
++
++    try {
++      Run(boblight);
++    }
++    catch (string error) {
++      PrintError(error);
++      boblight_destroy(boblight);
++      return 1;
++    }
++  }
++  fprintf(stdout, "Exiting\n");
++}
+diff -urPp src/clients/flagmanager-aml.cpp src/clients/boblight-aml/flagmanager-aml.cpp
+--- /dev/null	Thu Jan  1 00:00:00 1970
++++ b/src/clients/boblight-aml/flagmanager-aml.cpp	Thu Jan 15 10:21:40 2015
+@@ -0,0 +1,68 @@
++/*
++ * boblight
++ * Copyright (C) Bob  2009 
++ * 
++ * boblight is free software: you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation, either version 3 of the License, or
++ * (at your option) any later version.
++ * 
++ * boblight is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
++ * See the GNU General Public License for more details.
++ * 
++ * You should have received a copy of the GNU General Public License along
++ * with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <iostream>
++
++#include "flagmanager-aml.h"
++#include "util/misc.h"
++#include "config.h"
++
++#define DEFAULT_CAPTURE_DEVICE "/dev/amvideocap0"
++
++using namespace std;
++
++CFlagManagerAML::CFlagManagerAML()
++{
++  // extend the flags -d -> device
++  // -g -> only generate cmdline from possible found boblight addon settings.xml
++  m_flags += "d:g";
++  m_device = DEFAULT_CAPTURE_DEVICE;
++  generateCmdLine = false;
++}
++
++void CFlagManagerAML::ParseFlagsExtended(int& argc, char**& argv, int& c, char*& optarg)
++{
++  if (c == 'd') //devicename
++  {
++    if (optarg) //optional device
++    {
++      m_device = optarg;
++    }
++  }
++  
++  if (c == 'g') //generate cmdline
++  {
++    generateCmdLine = true;
++  }
++}
++
++void CFlagManagerAML::PrintHelpMessage()
++{
++  cout << "Usage: boblight-aml\n";
++  cout << "\n";
++  cout << "  options:\n";
++  cout << "\n";
++  cout << "  -p  priority, from 0 to 255, default is 128\n";
++  cout << "  -s  address[:port], set the address and optional port to connect to\n";
++  cout << "  -o  add libboblight option, syntax: [light:]option=value\n";
++  cout << "  -l  list libboblight options\n";
++  cout << "  -f  fork\n";
++  cout << "  -d  <device> (defaults to " << m_device << ")\n";
++  cout << "  -g  try to find the settings.xml file from boblight addon and return the cmdline to use its options\n";
++  cout << "\n";
++}
+diff -urPp src/clients/flagmanager-aml.h src/clients/boblight-aml/flagmanager-aml.h
+--- /dev/null	Thu Jan  1 00:00:00 1970
++++ b/src/clients/boblight-aml/flagmanager-aml.h	Thu Jan 15 10:20:15 2015
+@@ -0,0 +1,36 @@
++/*
++ * boblight
++ * Copyright (C) Bob  2009 
++ * 
++ * boblight is free software: you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation, either version 3 of the License, or
++ * (at your option) any later version.
++ * 
++ * boblight is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
++ * See the GNU General Public License for more details.
++ * 
++ * You should have received a copy of the GNU General Public License along
++ * with this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef FLAGMANAGERAML
++#define FLAGMANAGERAML
++
++#include "clients/flagmanager.h"
++
++class CFlagManagerAML : public CFlagManager
++{
++  public:
++    CFlagManagerAML();
++    void ParseFlagsExtended(int& argc, char**& argv, int& c, char*& optarg);
++
++    void PrintHelpMessage();
++    std::string m_device;           //device to open for amvideocap
++    bool generateCmdLine;
++
++};
++
++#endif //FLAGMANAGERAML
+\ No newline at end of file

packages/addons/service/multimedia/boblightd/source/bin/boblightd.start

@@ -35,4 +35,10 @@ if [ -x $ADDON_DIR/bin/boblight-X11 -a -e $ADDON_HOME/boblight.X11 ] ; then
   boblight-X11 -f >/dev/null 2>&1
 fi
 
+if [ -x $ADDON_DIR/bin/boblight-aml -a -e /dev/amvideocap0 ] ; then
+  #generates cmdline from boblight addon settings
+  CMDLINE=`boblight-aml -g`
+  boblight-aml $CMDLINE >/dev/null 2>&1 &
+fi
+
 exec boblightd -c $ADDON_HOME/boblight.conf > $ADDON_LOG_FILE 2>&1

packages/addons/service/multimedia/boblightd/source/system.d/service.multimedia.boblightd.service

@@ -3,12 +3,11 @@ Description=boblightd
 After=graphical.target
 
 [Service]
-ExecStart=/bin/sh -c "exec sh /storage/.xbmc/addons/service.multimedia.boblightd/bin/boblightd.start"
-ExecStopPost=-/bin/sh -c "pidof boblight-X11 && killall -q -9 boblight-X11"
+ExecStart=/bin/sh -c "exec sh /storage/.kodi/addons/service.multimedia.boblightd/bin/boblightd.start"
 TimeoutStopSec=1
 Restart=always
 RestartSec=10
 StartLimitInterval=0
 
 [Install]
-WantedBy=xbmc.target
+WantedBy=kodi.target

packages/addons/service/multimedia/tvheadend/changelog.txt

@@ -1,157 +0,0 @@
-4.1.2
-- fix issues with "wait for frontend init". thanks @sraue
-
-4.1.1
-- rebuild to fix curl/gnutls/ssl
-
-4.1.0
-- convert to systemd service
-- rebuild for addon api bump
-
-4.0.1
-- rebuild
-
-4.0.0
-- rebuild for OpenELEC-4.0
-
-3.1.4
-- rebuild
-
-3.1.3
-- update to TVHeadend 3.4.27
-
-3.1.2
-- fix unloading multiple modules on suspend
-
-3.1.1
-- rebuild for OpenELEC-3.2
-
-3.0.11
-- improve suspend/resume
-
-3.0.10
-- fix preloading capmt.so with sundtek
-- added the ability to use a script's stdout as the xmltv source instead of a fixed file or URL
-
-3.0.9
-- update to TVHeadend 3.4
-
-3.0.8
-- update to TVHeadend 3.3.521
-
-3.0.7
-- update to TVHeadend 3.3.511
-
-3.0.6
-- update to TVHeadend 3.3.491
-- disable avahi support
-
-3.0.5
-- update to TVHeadend 3.3.485
-
-3.0.4
-- update to TVHeadend 3.3.403
-
-3.0.3
-- update to TVHeadend 3.3.328
-- add an option to preload capmt_ca.so library
-
-3.0.2
-- update to TVHeadend 3.2.18
-
-3.0.1
-- bump addon version
-- add support to install as system addon
-- update to TVHeadend 3.2, rename addon
-- add version string to addon summary
-
-2.1.5
-- add an option to wait for more than 1 adapters to appear
-
-2.1.3
-- update to hts-tvheadend-78213a0
-
-2.1.2
-- add suspend/resume fixes
-- use KILL signal to stop tvheadend
-- add an option to wait for fe initialization
-
-2.1.1
-- update to addon version 2.1
-- update to hts-tvheadend-85e23bb
-
-2.0.8
-- define default recordings folder to /storage/recordings
-- update to hts-tvheadend-a76f365
-- add patch for support IPTV radio streams
-
-2.0.7
-- enable unloading/loading dvb modules on suspend/resume
-- add while loop for restarting tvheadend if it crashes
-
-2.0.6
-- add possibilty to start / stop addon from addon manager with enable / disable
-- add possibility to browse filesystem for xmltv source file
-- start tvheadend in video user group
-- update to hts-tvheadend-b877800
-
-2.0.5
-- start userspace DVB drivers before Tvheadend
-
-2.0.4
-- update to hts-tvheadend-fdf89b2
-
-2.0.3
-- rebuild for libiconv changes
-
-2.0.2
-- update to hts-tvheadend-d66746c
-
-2.0.1
-- fix patches
-
-2.0.0
-- prepare for OpenELEC-2.0 release
-
-1.90.2
-- depends on xbmc.python API 2.0
-
-1.90.1
-- update to hts-tvheadend-fdc743f
-
-1.90.0
-- add (CH) GA Weissenstein default muxes
-- prepare for OpenELEC-1.90 release
-
-1.0.1
-- add XMLTV tv_file_grab support
-- add XMLTV configuration support
-- add teletext support patch
-- add fix memory leak patch
-
-1.0.0
-- prepare for OpenELEC-1.0 release
-
-0.99.8
-- add suspend/wakeup script
-
-0.99.7
-- update to hts-tvheadend-c88a646
-
-0.99.6
-- update to hts-tvheadend-9d775da
-
-0.99.5
-- update to hts-tvheadend-ca68ed4
-
-0.99.4
-- change icon
-
-0.99.3
-- rebuild for openssl downgrade
-
-0.99.2
-- rework start scripts
-
-0.99.1
-- initial version hts-tvheadend-90e3570

packages/addons/service/multimedia/tvheadend/package.mk

@@ -1,64 +0,0 @@
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-PKG_NAME="tvheadend"
-PKG_VERSION="3.4.27"
-PKG_REV="2"
-PKG_ARCH="any"
-PKG_LICENSE="GPL"
-PKG_SITE="http://www.lonelycoder.com/hts/tvheadend_overview.html"
-#PKG_URL="https://github.com/downloads/tvheadend/tvheadend/${PKG_NAME}-${PKG_VERSION}.tar.gz"
-PKG_URL="$DISTRO_SRC/${PKG_NAME}-${PKG_VERSION}.tar.gz"
-PKG_DEPENDS_TARGET="toolchain openssl curl"
-PKG_PRIORITY="optional"
-PKG_SECTION="service/multimedia"
-PKG_SHORTDESC="tvheadend (Version: $PKG_VERSION): a TV streaming server for Linux supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, IPTV, and Analog video (V4L) as input sources."
-PKG_LONGDESC="Tvheadend (Version: $PKG_VERSION) is a TV streaming server for Linux supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, IPTV, and Analog video (V4L) as input sources. It also comes with a powerful and easy to use web interface both used for configuration and day-to-day operations, such as searching the EPG and scheduling recordings. Even so, the most notable feature of Tvheadend is how easy it is to set up: Install it, navigate to the web user interface, drill into the TV adapters tab, select your current location and Tvheadend will start scanning channels and present them to you in just a few minutes. If installing as an Addon a reboot is needed"
-PKG_IS_ADDON="yes"
-PKG_ADDON_TYPE="xbmc.service"
-PKG_AUTORECONF="no"
-
-pre_build_target() {
-  mkdir -p $PKG_BUILD/.$TARGET_NAME
-  cp -RP $PKG_BUILD/* $PKG_BUILD/.$TARGET_NAME
-}
-
-configure_target() {
-  ./configure --prefix=/usr \
-            --arch=$TARGET_ARCH \
-            --cpu=$TARGET_CPU \
-            --cc=$TARGET_CC \
-            --enable-timeshift \
-            --disable-libav \
-            --disable-avahi \
-            --enable-bundle
-}
-
-post_make_target() {
-  $CC -O -fbuiltin -fomit-frame-pointer -fPIC -shared -o capmt_ca.so src/extra/capmt_ca.c -ldl
-}
-
-makeinstall_target() {
-  : # nothing to do here
-}
-
-addon() {
-  mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/bin
-  cp -P $PKG_BUILD/.$TARGET_NAME/build.linux/tvheadend $ADDON_BUILD/$PKG_ADDON_ID/bin
-  cp -P $PKG_BUILD/.$TARGET_NAME/capmt_ca.so $ADDON_BUILD/$PKG_ADDON_ID/bin
-}

packages/addons/service/multimedia/tvheadend/source/bin/tv_grab_file

@@ -1,84 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-. /etc/profile
-
-ADDON_HOME="$HOME/.xbmc/userdata/addon_data/service.multimedia.tvheadend"
-ADDON_SETTINGS="$ADDON_HOME/settings.xml"
-XMLTV_TYPE=`grep XMLTV_TYPE $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
-XMLTV_LOCATION_FILE=`grep XMLTV_LOCATION_FILE $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
-XMLTV_LOCATION_WEB=`grep XMLTV_LOCATION_WEB $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
-XMLTV_LOCATION_SCRIPT=`grep XMLTV_LOCATION_SCRIPT $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
-
-dflag=
-vflag=
-cflag=
-
-if [[ $# -lt 1 ]]; then
-  if [ "$XMLTV_TYPE" = "FILE" ]; then
-    cat "$XMLTV_LOCATION_FILE"
-    exit 0
-  elif [ "$XMLTV_TYPE" = "SCRIPT" ]; then
-    if [ -e "$XMLTV_LOCATION_SCRIPT" ] ; then
-      exec "$XMLTV_LOCATION_SCRIPT"
-    fi
-  elif [ "$XMLTV_TYPE" = "WEB" ]; then
-    wget -qO - "$XMLTV_LOCATION_WEB"
-    exit 0
-  fi
-fi
-
-for arg; do
-    delim=""
-    case "$arg" in
-    #translate --gnu-long-options to -g (short options)
-       --description) args="${args}-d ";;
-       --version) args="${args}-v ";;
-       --capabilities) args="${args}-c ";;
-       #pass through anything else
-       *) [[ "${arg:0:1}" == "-" ]] || delim="\""
-           args="${args}${delim}${arg}${delim} ";;
-    esac
-done
-
-#Reset the positional parameters to the short options
-eval set -- $args
-
-while getopts "dvc" option; do
-    case $option in
-        d)  dflag=1;;
-        v)  vflag=1;;
-        c)  cflag=1;;
-        \?) printf "unknown option: -%s\n" $OPTARG
-            printf "Usage: %s: [--description] [--version] [--capabilities] \n" $(basename $0)
-            exit 2
-            ;;
-    esac >&2
-done
-
-if [ "$dflag" ]; then
-   printf "tv_grab_file is a simple grabber that just read the local or web XMLTV formated file\n"
-fi
-if [ "$vflag" ]; then
-   printf "0.1\n"
-fi
-if [ "$cflag" ]; then
-   printf "baseline\n"
-fi

packages/addons/service/multimedia/tvheadend/source/bin/tvheadend.start

@@ -1,94 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-. /etc/profile
-
-oe_setup_addon service.multimedia.tvheadend
-
-ADDON_SETTINGS="$ADDON_HOME/settings.xml"
-XMLTV_FILE="$ADDON_DIR/bin/tv_grab_file"
-XMLTV_SETTINGS_DIR="$ADDON_HOME/xmltv"
-XMLTV_SETTINGS_FILE="$XMLTV_SETTINGS_DIR/config"
-DVR_SETTINGS_DIR="$ADDON_HOME/dvr"
-DVR_SETTINGS_FILE="$DVR_SETTINGS_DIR/config"
-DVR_DIR="$HOME/recordings"
-TIMESHIFT_SETTINGS_DIR="$ADDON_HOME/timeshift"
-TIMESHIFT_SETTINGS_FILE="$TIMESHIFT_SETTINGS_DIR/config"
-TIMESHIFT_DIR="$ADDON_HOME/cache/timeshift"
-
-chmod a+x $ADDON_DIR/bin/*
-
-if [ ! -f "$XMLTV_SETTINGS_FILE" ]; then
-  mkdir -p $XMLTV_SETTINGS_DIR
-  if [ -f $ADDON_DIR/xmltv-config ]; then
-    cp $ADDON_DIR/xmltv-config $XMLTV_SETTINGS_FILE
-  fi
-fi
-
-if [ ! -f "$DVR_SETTINGS_FILE" ]; then
-  mkdir -p $DVR_DIR
-  mkdir -p $DVR_SETTINGS_DIR
-  if [ -f $ADDON_DIR/dvr-config ]; then
-    cp $ADDON_DIR/dvr-config $DVR_SETTINGS_FILE
-  fi
-fi
-
-if [ ! -f "$TIMESHIFT_SETTINGS_FILE" ]; then
-  mkdir -p $TIMESHIFT_DIR
-  mkdir -p $TIMESHIFT_SETTINGS_DIR
-  if [ -f $ADDON_DIR/timeshift-config ]; then
-    cp $ADDON_DIR/timeshift-config $TIMESHIFT_SETTINGS_FILE
-  fi
-fi
-
-if [ "$DEBUG" = "yes" ]; then
-  TVHEADEND_ARG="-C -s -u root -g video -c $ADDON_HOME"
-else
-  TVHEADEND_ARG="-C -u root -g video -c $ADDON_HOME"
-fi
-
-# start userspace DVB driver/addon
-for driver_dvb in $(find /storage/.xbmc/addons/driver.dvb.*/bin/userspace-driver.sh -type f 2>/dev/null); do
-  driver_dvb_name=$(echo $driver_dvb | awk 'BEGIN {FS="/"} {printf("%s", $5)}')
-  logger -t Tvheadend "### Loading userspace DVB driver: $driver_dvb_name ###"
-  # use ". " because of variable export
-  . $driver_dvb
-done
-
-# (wait for) at least 1 adapter (xbmc allows to set 0)
-# xbmc allows "numeric" type field to be empty. lets handle thaat
-[ "$NUM_ADAPTERS" = "" ] && NUM_ADAPTERS=1
-# 0 does not make sense. should be 1 or more
-[ $NUM_ADAPTERS -lt 1 ] && NUM_ADAPTERS=1
-if [ "$WAIT_FOR_FEINIT" == "true" ] ; then
-  while [ true ] ; do
-    if [ -e /dev/dvb/adapter$((NUM_ADAPTERS-1))/frontend0 ] ; then
-      break
-    fi
-    sleep 1
-  done
-fi
-
-if [ "$PRELOAD_CAPMT_CA" == "true" ] ; then
-  logger -t Tvheadend "### Preloading capmt_ca.so library ###"
-  LD_PRELOAD="$ADDON_DIR/bin/capmt_ca.so $LD_PRELOAD" exec tvheadend $TVHEADEND_ARG &>$ADDON_LOG_FILE
-else
-  exec tvheadend $TVHEADEND_ARG &>$ADDON_LOG_FILE
-fi

packages/addons/service/multimedia/tvheadend/source/dvr-config

@@ -1,15 +0,0 @@
-{
-	"storage": "/storage/recordings",
-	"retention-days": 31,
-	"pre-extra-time": 0,
-	"post-extra-time": 0,
-	"day-dir": 0,
-	"channel-dir": 0,
-	"channel-in-title": 0,
-	"date-in-title": 0,
-	"time-in-title": 0,
-	"whitespace-in-title": 0,
-	"title-dir": 0,
-	"episode-in-title": 0,
-	"tag-files": 1
-}

packages/addons/service/multimedia/tvheadend/source/resources/language/English/strings.xml

@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8" standalone="yes"?>
-<strings>
-
-	<!-- HTS TVHEADEND -->
-	<string id="1000">XMLTV</string>
-	<string id="1001">DVB</string>
-	<string id="1011">XMLTV configuration</string>
-	<string id="1011">XMLTV source type</string>
-	<string id="1012">XMLTV File location</string>
-	<string id="1013">XMLTV Web location</string>
-	<string id="1014">XMLTV Script location</string>
-	<string id="1020">DVB Configuration</string>
-	<string id="1021">Unload DVB mudules before suspend</string>
-	<string id="1022">Wait for frontend initialization</string>
-	<string id="1023">Number of adapters to wait for</string>
-	<string id="1024">Preload capmt_ca.so library</string>
-
-</strings>

packages/addons/service/multimedia/tvheadend/source/resources/settings.xml

@@ -1,21 +0,0 @@
-<?xml version="1.0" encoding="utf-8" standalone="yes"?>
-<settings>
-
-   <!-- HTS TVHEADEND -->
-    <category label="1000">
-		<setting label="1010" type="lsep"/>
-		<setting type="sep" />
-		<setting id="XMLTV_TYPE" type="labelenum" label="1011" values="NONE|FILE|SCRIPT|WEB" sort="yes" default="NONE"/>
-		<setting id="XMLTV_LOCATION_FILE" type="file" label="1012" default="" enable="eq(-1,0)"/>
-		<setting id="XMLTV_LOCATION_WEB" type="text" label="1013" default="http://" enable="eq(-2,3)"/>
-		<setting id="XMLTV_LOCATION_SCRIPT" type="file" label="1014" default="" enable="eq(-3,2)"/>
-    </category>
-    <category label="1001">
-		<setting label="1020" type="lsep"/>
-		<setting type="sep" />
-		<setting id="WAIT_FOR_FEINIT" type="bool" label="1022" default="false" />
-		<setting id="NUM_ADAPTERS" type="number" label="1023" default="1" enable="eq(-1,true)" />
-		<setting id="REMOVE_MODULES" type="text" label="1021" values="" default=""/>
-		<setting id="PRELOAD_CAPMT_CA" type="bool" label="1024" default="false" />
-    </category>
-</settings>

packages/addons/service/multimedia/tvheadend/source/settings-default.xml

@@ -1,8 +0,0 @@
-<settings>
-    <setting id="WAIT_FOR_FEINIT" value="false" />
-    <setting id="NUM_ADAPTERS" value="1" />
-    <setting id="XMLTV_LOCATION_FILE" value="" />
-    <setting id="XMLTV_LOCATION_WEB" value="http://" />
-    <setting id="XMLTV_TYPE" value="NONE" />
-    <setting id="PRELOAD_CAPMT_CA" value="false" />
-</settings>

packages/addons/service/multimedia/tvheadend/source/system.d/service.multimedia.tvheadend.service

@@ -1,13 +0,0 @@
-[Unit]
-Description=TVHeadend Service
-After=graphical.target
-
-[Service]
-ExecStart=/bin/sh -c "exec sh /storage/.xbmc/addons/service.multimedia.tvheadend/bin/tvheadend.start"
-TimeoutStopSec=2
-Restart=always
-RestartSec=2
-StartLimitInterval=0
-
-[Install]
-WantedBy=xbmc.target

packages/addons/service/multimedia/tvheadend/source/timeshift-config

@@ -1,9 +0,0 @@
-{
-	"enabled": 0,
-	"ondemand": 0,
-	"path": "/storage/.xbmc/userdata/addon_data/service.multimedia.tvheadend/cache/timeshift",
-	"unlimited_period": 0,
-	"max_period": 3600,
-	"unlimited_size": 0,
-	"max_size": 1024
-}

packages/addons/service/multimedia/tvheadend/source/xmltv-config

@@ -1,14 +0,0 @@
-{
-	"grabbers": [
-		{
-			"path": "/storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file",
-			"description": "tv_grag_file is a simple grabber that just read the ~/.xmltv/tv_grab_file.xmltv file",
-			"version": "0.1\n",
-			"mtime": 1318774706,
-			"capabilities": 1
-		}
-	],
-	"grab-interval": 12,
-	"grab-enabled": 1,
-	"current-grabber": "/storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file"
-}

packages/addons/service/multimedia/vdr-addon/changelog.txt

@@ -1,3 +1,72 @@
+4.3.11
+- update to vdr-plugin-restfulapi-0.2.1.4
+
+4.3.10
+- disable dvbapi network mode
+
+4.3.9
+- update to vdr-2.2.0
+- update to vdr-iptv-2.2.0
+- update to vdr-satip-2.2.0
+- update to vdr-plugin-dvbapi-c0c7fa2
+- update to vdr-plugin-eepg-9cd9a75
+- update to vdr-plugin-vnsiserver-9529e6d
+- update to vdr-plugin-streamdev-84c6f6b
+
+4.3.8
+- update to vdr-2.1.10
+- update to vdr-plugin-restfulapi-0.2.1.1
+- update to vdr-plugin-vnsiserver-f2175ba
+
+4.3.7
+- update to vdr-2.1.8
+- update to vdr-plugin-vnsiserver-b887bc8
+- update to vdr-wirbelscan-0.0.9
+
+4.3.6
+- update to vdr-satip-1.0.2
+- update to vdr-2.1.7
+
+4.3.5
+- add plugin 'vdr-plugin-restfulapi'
+- update to vdr-plugin-xvdr-b300fc3
+
+4.3.4
+- update to vdr-plugin-vnsiserver-a48edf1
+- update to vdr-plugin-dvbapi-36a6b1d
+
+4.3.3
+- add plugin 'vdr-plugin-epgfixer'
+- update to vdr-satip-1.0.1
+
+4.3.2
+- update to kodi
+
+4.3.1
+- update to vdr-plugin-vnsiserver-a7cb405
+- update to vdr-plugin-dvbapi-2617a7f
+
+4.3.0
+- rebuild for addon api bump
+
+4.1.7
+- add option to override epg charset
+- update to vdr-plugin-vnsiserver-7d4aa81
+- update to vdr-satip-0.3.3
+- update to vdr-plugin-eepg-d7dc614
+- update to vdr-plugin-dvbapi-bdcad3f
+- update to vdr-iptv-2.1.3
+
+4.1.6
+- update to vdr-2.1.6
+- add plugin 'vdr-dummydevice'
+- add plugin 'vdr-satip'
+- remove plugin: 'sc'
+- update to vdr-iptv-2.1.2
+- update to vdr-plugin-xvdr-7f49bfa
+- update to vdr-plugin-vnsiserver-a3f7ac5
+- update to vdr-plugin-dvbapi-bf11f9e
+
 4.1.5
 - fix issues with "wait for frontend init". thanks @sraue
 

packages/addons/service/multimedia/vdr-addon/package.mk

@@ -18,13 +18,13 @@
 ################################################################################
 
 PKG_NAME="vdr-addon"
-PKG_VERSION="4.1"
-PKG_REV="5"
+PKG_VERSION="4.3"
+PKG_REV="11"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.openelec.tv"
 PKG_URL=""
-PKG_DEPENDS_TARGET="toolchain attr libcap vdr vdr-plugin-xvdr vdr-plugin-vnsiserver vdr-iptv vdr-wirbelscan vdr-wirbelscancontrol vdr-sc vdr-plugin-dvbapi vdr-plugin-streamdev vdr-live vdr-control vdr-epgsearch vdr-plugin-xmltv2vdr vdr-plugin-eepg"
+PKG_DEPENDS_TARGET="toolchain attr libcap vdr vdr-plugin-xvdr vdr-plugin-vnsiserver vdr-iptv vdr-wirbelscan vdr-wirbelscancontrol vdr-plugin-dvbapi vdr-plugin-streamdev vdr-live vdr-control vdr-epgsearch vdr-plugin-xmltv2vdr vdr-plugin-eepg vdr-dummydevice vdr-satip vdr-plugin-epgfixer vdr-plugin-restfulapi"
 PKG_PRIORITY="optional"
 PKG_SECTION="service.multimedia"
 PKG_SHORTDESC="vdr: A powerful DVB TV application"
@@ -46,12 +46,13 @@ addon() {
   VDR_LIVE_DIR="$(get_build_dir vdr-live)"
   VDR_PLUGIN_XVDR_DIR="$(get_build_dir vdr-plugin-xvdr)"
   VDR_PLUGIN_VNSISERVER_DIR="$(get_build_dir vdr-plugin-vnsiserver)"
-  VDR_SC_DIR="$(get_build_dir vdr-sc)"
   VDR_PLUGIN_STREAMVEV_DIR="$(get_build_dir vdr-plugin-streamdev)"
   VDR_PLUGIN_XMLTV2VDR="$(get_build_dir vdr-plugin-xmltv2vdr)"
+  VDR_PLUGIN_EPGFIXER_DIR="$(get_build_dir vdr-plugin-epgfixer)"
+  VDR_PLUGIN_RESTFULAPI_DIR="$(get_build_dir vdr-plugin-restfulapi)"
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config
-  cp $VDR_DIR/channels.conf $ADDON_BUILD/$PKG_ADDON_ID/config
+  touch $ADDON_BUILD/$PKG_ADDON_ID/config/channels.conf
   cp $VDR_DIR/diseqc.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   cp $VDR_DIR/keymacros.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   cp $VDR_DIR/scr.conf $ADDON_BUILD/$PKG_ADDON_ID/config
@@ -77,8 +78,6 @@ addon() {
   cp -PR $(get_build_dir vdr-wirbelscancontrol)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $(get_build_dir vdr-plugin-dvbapi)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $(get_build_dir vdr-plugin-eepg)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
-  cp -PR $VDR_SC_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
-  cp -PR $VDR_SC_DIR/systems/*/libsc*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $VDR_PLUGIN_STREAMVEV_DIR/server/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $VDR_PLUGIN_STREAMVEV_DIR/client/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $VDR_LIVE_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
@@ -86,6 +85,9 @@ addon() {
   cp -PR $(get_build_dir vdr-epgsearch)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $VDR_PLUGIN_XMLTV2VDR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $(get_build_dir vdr-dummydevice)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
+  cp -PR $(get_build_dir vdr-satip)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
+  cp -PR $VDR_PLUGIN_EPGFIXER_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
+  cp -PR $VDR_PLUGIN_RESTFULAPI_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/eepg
 
@@ -101,8 +103,15 @@ addon() {
   cp -P $VDR_PLUGIN_XMLTV2VDR/dist/epgdata2xmltv/epgdata2xmltv $ADDON_BUILD/$PKG_ADDON_ID/bin
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/lib
-  cp -P $(get_build_dir tntnet)/.install_pkg/usr/lib/libtntnet.so* $ADDON_BUILD/$PKG_ADDON_ID/lib
+  cp -PL $(get_build_dir tntnet)/.install_pkg/usr/lib/libtntnet.so.12 $ADDON_BUILD/$PKG_ADDON_ID/lib
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/streamdev-server
   cp -PR $VDR_PLUGIN_STREAMVEV_DIR/streamdev-server/streamdevhosts.conf $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/streamdev-server
+
+  mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/epgfixer
+  cp -PR $VDR_PLUGIN_EPGFIXER_DIR/epgfixer/*.conf $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/epgfixer
+
+  mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/res/plugins/restfulapi
+  cp -P $VDR_PLUGIN_RESTFULAPI_DIR/web/* $ADDON_BUILD/$PKG_ADDON_ID/res/plugins/restfulapi
+  cp -P $VDR_PLUGIN_RESTFULAPI_DIR/API.html $ADDON_BUILD/$PKG_ADDON_ID/res/plugins/restfulapi
 }

packages/addons/service/multimedia/vdr-addon/source/bin/vdr.start

@@ -45,9 +45,7 @@ ADDON_PLUGIN_DIR="$ADDON_DIR/plugin"
 chmod a+x $ADDON_DIR/bin/*
 
 ADDON_CACHE_DIR="$ADDON_HOME/cache"
-if [ ! -f "$ADDON_CACHE_DIR" ]; then
-  mkdir -p $ADDON_CACHE_DIR
-fi
+mkdir -p $ADDON_CACHE_DIR
 
 VDR_ARG="-g /tmp --no-kbd"
 if [ "$DEBUG" = "yes" ]; then
@@ -76,13 +74,19 @@ if [ "$ENABLE_EXTERNAL_RECCMD" == "true" ] ; then
   fi
 fi
 
+if [ "$ENABLE_CHARSET_OVERRIDE" == "true" ] ; then
+  if [ ! -z "$CHARSET_OVERRIDE_STR" ] ; then
+    VDR_CHARSET_OVERRIDE="$CHARSET_OVERRIDE_STR"
+  fi
+fi
+
 # keep softcam first
 if [ "$ENABLE_SOFTCAM" == "true" ] ; then
-  VDR_ARG="$VDR_ARG -P $SOFTCAM_PLUGIN"
+  VDR_ARG="$VDR_ARG -P dvbapi"
 fi
 VDR_ARG="$VDR_ARG -P wirbelscan -P wirbelscancontrol"
 if [ "$ENABLE_IPTV" == "true" ] ; then
-  VDR_ARG="$VDR_ARG -P iptv"
+  VDR_ARG="$VDR_ARG -P 'iptv -d $IPTV_NUM_DEVICES'"
 fi
 if [ "$ENABLE_STREAMDEV_SERVER" == "true" ] ; then
   VDR_ARG="$VDR_ARG -P streamdev-server"
@@ -99,12 +103,18 @@ fi
 if [ "$ENABLE_EEPG" == "true" ] ; then
   VDR_ARG="$VDR_ARG -P eepg"
 fi
+if [ "$ENABLE_EPGFIXER" == "true" ] ; then
+  VDR_ARG="$VDR_ARG -P epgfixer"
+fi
 if [ "$ENABLE_EPGSEARCH" == "true" ] ; then
   VDR_ARG="$VDR_ARG -P epgsearch"
 fi
 if [ "$ENABLE_DUMMYDEVICE" == "true" ] ; then
   VDR_ARG="$VDR_ARG -P dummydevice"
 fi
+if [ "$ENABLE_SATIP" == "true" ] ; then
+  VDR_ARG="$VDR_ARG -P satip"
+fi
 if [ "$ENABLE_XMLTV2VDR" == "true" ] ; then
   VDR_ARG="$VDR_ARG -P 'xmltv2vdr --epgfile=$ADDON_CACHE_DIR/epg.db'"
   # xmltv2vdr needs /var/run/vdr
@@ -121,11 +131,26 @@ if [ "$ENABLE_XMLTV2VDR" == "true" ] ; then
     cp $source /var/lib/epgsources
   done
 fi
+
+if [ "$ENABLE_RESTFULAPI" == "true" ] ; then
+  RESTFULAPI_ARGS="--ip $RESTFULAPI_IP --port $RESTFULAPI_PORT"
+  if [ ! -z "$RESTFULAPI_EPGIMAGES" ]; then
+    mkdir -p "$RESTFULAPI_EPGIMAGES"
+    RESTFULAPI_ARGS="$RESTFULAPI_ARGS --epgimages=\"$RESTFULAPI_EPGIMAGES\""
+  fi
+  if [ ! -z "$RESTFULAPI_CHANNELLOGOS" ]; then
+    mkdir -p "$RESTFULAPI_CHANNELLOGOS"
+    RESTFULAPI_ARGS="$RESTFULAPI_ARGS --channellogos=\"$RESTFULAPI_CHANNELLOGOS\""
+  fi
+  VDR_ARG="$VDR_ARG -P 'restfulapi $RESTFULAPI_ARGS'"
+fi
+
 # vnsi/xvdr last
 VDR_ARG="$VDR_ARG -P $PVR_PLUGIN"
 
 cd $ADDON_DIR/config
 mkdir -p $ADDON_CONFIG_DIR
+mkdir -p "$VDR_VIDEO_DIR"
 
 for dir in `find . -type d`; do
   mkdir -p $ADDON_CONFIG_DIR/$dir
@@ -138,18 +163,13 @@ for config in `find . -type f`; do
 done
 
 # start userspace DVB driver/addon
-for driver_dvb in $(find /storage/.xbmc/addons/driver.dvb.*/bin/userspace-driver.sh -type f 2>/dev/null); do
+for driver_dvb in $(find /storage/.kodi/addons/driver.dvb.*/bin/userspace-driver.sh -type f 2>/dev/null); do
   driver_dvb_name=$(echo $driver_dvb | awk 'BEGIN {FS="/"} {printf("%s", $5)}')
   logger -t VDR "### Loading userspace DVB driver: $driver_dvb_name ###"
   # use ". " because of variable export
   . $driver_dvb
 done
 
-# (wait for) at least 1 adapter (xbmc allows to set 0)
-# xbmc allows "numeric" type field to be empty. lets handle thaat
-[ "$NUM_ADAPTERS" = "" ] && NUM_ADAPTERS=1
-# 0 does not make sense. should be 1 or more
-[ $NUM_ADAPTERS -lt 1 ] && NUM_ADAPTERS=1
 if [ "$WAIT_FOR_FEINIT" == "true" ] ; then
   while [ true ] ; do
     if [ -e /dev/dvb/adapter$((NUM_ADAPTERS-1))/frontend0 ] ; then
@@ -160,4 +180,4 @@ if [ "$WAIT_FOR_FEINIT" == "true" ] ; then
 fi
 
 fix_config
-eval LANG=en_US.UTF-8 exec vdr.bin $VDR_ARG
+eval LANG=en_US.UTF-8 VDR_CHARSET_OVERRIDE="$VDR_CHARSET_OVERRIDE" exec vdr.bin $VDR_ARG

packages/addons/service/multimedia/vdr-addon/source/resources/language/English/strings.xml

@@ -4,29 +4,36 @@
 	<string id="1001">Plugins</string>
 	<string id="1002">VDR</string>
 	<string id="1020">DVB Configuration</string>
-	<string id="1021">Unload DVB mudules before suspend</string>
+	<string id="1021">Unload DVB modules before suspend</string>
 	<string id="1022">Wait for frontend initialization</string>
 	<string id="1023">Number of adapters to wait for</string>
+	<string id="1024">Enable charset override</string>
+	<string id="1025">- charset</string>
 	<string id="1030">Plugin Configuration</string>
 	<string id="1031">Enable plugin: iptv</string>
 	<string id="1032">Enable plugin: streamdev-client</string>
 	<string id="1033">Enable plugin: streamdev-server</string>
-	<string id="1036">Enable softcam</string>
-	<string id="1037">softcam plugin</string>
+	<string id="1036">Enable softcam (dvbapi)</string>
 	<string id="1038">Enable plugin: live</string>
-	<string id="1039">live: listen on ip</string>
-	<string id="1040">live: listen on port</string>
+	<string id="1039">- listen on ip</string>
+	<string id="1040">- listen on port</string>
 	<string id="1042">Enable plugin: control</string>
-	<string id="1043">control: listen on port</string>
+	<string id="1043">- listen on port</string>
 	<string id="1044">Enable plugin: epgsearch</string>
 	<string id="1045">Enable plugin: xmltv2vdr</string>
 	<string id="1046">Enable plugin: extended EPG</string>
 	<string id="1047">Enable plugin: dummydevice</string>
+	<string id="1048">Enable plugin: satip</string>
+	<string id="1049">Enable plugin: epgfixer</string>
 	<string id="1051">VDR Configuration</string>
 	<string id="1052">VDR Video Dir</string>
 	<string id="1053">PVR plugin</string>
-	<string id="1054">Enable dvb(sd|hd)device plugin</string>
-	<string id="1055">plugin</string>
         <string id="1056">Enable external recdmd</string>
         <string id="1057">External recdmd path</string>
+        <string id="1058">- number of devices</string>
+	<string id="1070">Enable plugin: restfulapi</string>
+	<string id="1071">- listen on ip</string>
+	<string id="1072">- listen on port</string>
+	<string id="1073">- Path to the epgimages</string>
+	<string id="1074">- Path to the channellogos</string>
 </strings>

packages/addons/service/multimedia/vdr-addon/source/resources/settings.xml

@@ -4,8 +4,10 @@
 		<setting label="1020" type="lsep"/>
 		<setting type="sep" />
 		<setting id="WAIT_FOR_FEINIT" type="bool" label="1022" default="false" />
-		<setting id="NUM_ADAPTERS" type="number" label="1023" default="1" enable="eq(-1,true)" />
+		<setting id="NUM_ADAPTERS" type="slider" range="1,16" option="int" label="1023" default="1" enable="eq(-1,true)" />
 		<setting id="REMOVE_MODULES" type="text" label="1021" values="" default=""/>
+		<setting id="ENABLE_CHARSET_OVERRIDE" type="bool" label="1024" default="false" />
+		<setting id="CHARSET_OVERRIDE_STR" type="text" label="1025" visible="!eq(-1,false)" default="" />
     </category>
     <category label="1002">
 		<setting label="1051" type="lsep"/>
@@ -13,26 +15,33 @@
                 <setting id="VDR_VIDEO_DIR" type="folder" label="1052" value="" default="/storage/videos" />
                 <setting type="sep" />
                 <setting id="ENABLE_EXTERNAL_RECCMD" type="bool" label="1056" default="false" />
-                <setting id="EXTERNAL_RECCMD_PATH" type="file" label="1057" enable="!eq(-1,false)" default="" />
+                <setting id="EXTERNAL_RECCMD_PATH" type="file" label="1057" visible="!eq(-1,false)" default="" />
     </category>
     <category label="1001">
 		<setting label="1030" type="lsep"/>
 		<setting type="sep" />
 		<setting id="PVR_PLUGIN" type="labelenum" label="1053" values="xvdr|vnsiserver" default="vnsiserver" />
 		<setting id="ENABLE_IPTV" type="bool" label="1031" default="false" />
+		<setting id="IPTV_NUM_DEVICES" type="slider" option="int" range="1,4" label="1058" visible="!eq(-1,false)" default="1" />
 		<setting id="ENABLE_STREAMDEV_CLIENT" type="bool" label="1032" default="false" />
 		<setting id="ENABLE_STREAMDEV_SERVER" type="bool" label="1033" default="false" />
 		<setting id="ENABLE_LIVE" type="bool" label="1038" default="false" />
-		<setting id="LIVE_IP" type="ipaddress" label="1039" values="" enable="!eq(-1,false)" default="0.0.0.0"/>
-		<setting id="LIVE_PORT" type="number" label="1040" values="" enable="!eq(-2,false)"  default="8008"/>
+		<setting id="LIVE_IP" type="ipaddress" label="1039" values="" visible="!eq(-1,false)" default="0.0.0.0"/>
+		<setting id="LIVE_PORT" type="number" label="1040" values="" visible="!eq(-2,false)"  default="8008"/>
 		<setting id="ENABLE_CONTROL" type="bool" label="1042" default="false" />
-		<setting id="CONTROL_PORT" type="number" label="1043" values="" enable="!eq(-1,false)"  default="2002"/>
+		<setting id="CONTROL_PORT" type="number" label="1043" values="" visible="!eq(-1,false)"  default="2002"/>
 		<setting id="ENABLE_EEPG" type="bool" label="1046" default="false" />
 		<setting id="ENABLE_EPGSEARCH" type="bool" label="1044" default="false" />
 		<setting id="ENABLE_XMLTV2VDR" type="bool" label="1045" default="false" />
 		<setting id="ENABLE_DUMMYDEVICE" type="bool" label="1047" default="false" />
+		<setting id="ENABLE_SATIP" type="bool" label="1048" default="false" />
+		<setting id="ENABLE_EPGFIXER" type="bool" label="1049" default="false" />
+		<setting id="ENABLE_RESTFULAPI" type="bool" label="1070" default="false" />
+		<setting id="RESTFULAPI_IP" type="ipaddress" label="1071" values="" visible="!eq(-1,false)" default="0.0.0.0"/>
+		<setting id="RESTFULAPI_PORT" type="number" label="1072" values="" visible="!eq(-2,false)"  default="8002"/>
+		<setting id="RESTFULAPI_EPGIMAGES" type="file" label="1073" values="" visible="!eq(-3,false)"  default="/storage/.kodi/userdata/addon_data/service.multimedia.vdr-addon/epgimages"/>
+		<setting id="RESTFULAPI_CHANNELLOGOS" type="file" label="1074" values="" visible="!eq(-4,false)"  default="/storage/.kodi/userdata/addon_data/service.multimedia.vdr-addon/channellogos"/>
 		<setting type="sep" />
 		<setting id="ENABLE_SOFTCAM" type="bool" label="1036" default="true" />
-                <setting id="SOFTCAM_PLUGIN" type="labelenum" label="1037" values="sc|dvbapi" enable="!eq(-1,false)" default="sc" />
     </category>
 </settings>

packages/addons/service/multimedia/vdr-addon/source/settings-default.xml

@@ -14,10 +14,19 @@
     <setting id="ENABLE_CONTROL" value="false" />
     <setting id="CONTROL_PORT" value="2002" />
     <setting id="ENABLE_EEPG" value="false" />
+    <setting id="ENABLE_EPGFIXER" value="false" />
     <setting id="ENABLE_EPGSEARCH" value="false" />
     <setting id="ENABLE_XMLTV2VDR" value="false" />
     <setting id="ENABLE_DUMMYDEVICE" value="false" />
-    <setting id="SOFTCAM_PLUGIN" value="sc" />
+    <setting id="ENABLE_SATIP" value="false" />
     <setting id="ENABLE_EXTERNAL_RECCMD" value="false" />
+    <setting id="ENABLE_RESTFULAPI" value="false" />
     <setting id="EXTERNAL_RECCMD_PATH" value="" />
+    <setting id="ENABLE_CHARSET_OVERRIDE" value="false" />
+    <setting id="CHARSET_OVERRIDE_STR" value="" />
+    <setting id="IPTV_NUM_DEVICES" value="1" />
+    <setting id="RESTFULAPI_IP" value="0.0.0.0" />
+    <setting id="RESTFULAPI_PORT" value="8002" />
+    <setting id="RESTFULAPI_EPGIMAGES" value="/storage/.kodi/userdata/addon_data/service.multimedia.vdr-addon/epgimages" />
+    <setting id="RESTFULAPI_CHANNELLOGOS" value="/storage/.kodi/userdata/addon_data/service.multimedia.vdr-addon/channellogos" />
 </settings>

packages/addons/service/multimedia/vdr-addon/source/system.d/service.multimedia.vdr-addon.service

@@ -3,11 +3,11 @@ Description=vdr
 After=graphical.target
 
 [Service]
-ExecStart=/bin/sh -c "exec sh /storage/.xbmc/addons/service.multimedia.vdr-addon/bin/vdr.start"
+ExecStart=/bin/sh -c "exec sh /storage/.kodi/addons/service.multimedia.vdr-addon/bin/vdr.start"
 TimeoutStopSec=2
 Restart=always
 RestartSec=2
 StartLimitInterval=0
 
 [Install]
-WantedBy=xbmc.target
+WantedBy=kodi.target

packages/audio/alsa-lib/package.mk

@@ -1,6 +1,6 @@
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#      Copyright (C) 2009-2016 Stephan Raue ([email protected])
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="alsa-lib"
-PKG_VERSION="1.0.27.2"
+PKG_VERSION="1.1.0"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -58,8 +58,6 @@ post_configure_target() {
 post_makeinstall_target() {
   rm -rf $INSTALL/usr/bin
 
-  mkdir -p $INSTALL/etc/modprobe.d
-    cp -PR $PKG_DIR/config/alsa-base.conf $INSTALL/etc/modprobe.d
   mkdir -p $INSTALL/usr/config
     cp -PR $PKG_DIR/config/modprobe.d $INSTALL/usr/config
 }

packages/audio/alsa-lib/patches/alsa-lib-USB_Soundblaster_HD.patch

@@ -0,0 +1,23 @@
+From 982c628f484266c8db4f70dc1e856bc7844c1873 Mon Sep 17 00:00:00 2001
+From: Patrick Rasmussen <[email protected]>
+Date: Fri, 13 Mar 2015 14:52:56 +0100
+Subject: [PATCH] Add USB Sound Blaster HD
+
+---
+ src/conf/cards/USB-Audio.conf | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf
+index 4cbf85e..2591d00 100644
+--- a/src/conf/cards/USB-Audio.conf
++++ b/src/conf/cards/USB-Audio.conf
+@@ -62,6 +62,7 @@ USB-Audio.pcm.iec958_device {
+ # Second iec958 device number, if any.
+ USB-Audio.pcm.iec958_2_device {
+ 	"PHIREE U2" 1  # 0 = PCM S/PDIF, 1 = non-PCM S/PDIF
++	"USB Sound Blaster HD" 1
+ }
+ 
+ 
+-- 
+2.1.4

packages/audio/alsa-utils/package.mk

@@ -1,6 +1,6 @@
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#      Copyright (C) 2009-2016 Stephan Raue ([email protected])
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="alsa-utils"
-PKG_VERSION="1.0.27.2"
+PKG_VERSION="1.1.0"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -39,6 +39,7 @@ PKG_CONFIGURE_OPTS_TARGET="--disable-dependency-tracking \
                            --disable-alsaconf \
                            --disable-alsaloop \
                            --enable-alsatest \
+                           --disable-bat \
                            --disable-nls"
 
 
@@ -48,6 +49,10 @@ post_makeinstall_target() {
   rm -rf $INSTALL/usr/share/sounds
   rm -rf $INSTALL/usr/lib/systemd/system
 
+# remove default udev rule to restore mixer configs, we install our own.
+# so we avoid resetting our soundconfig
+  rm -rf $INSTALL/usr/lib/udev/rules.d/90-alsa-restore.rules
+
   for i in aconnect alsaucm amidi aplaymidi arecord arecordmidi aseqdump aseqnet iecset; do
     rm -rf $INSTALL/usr/bin/$i
   done

packages/audio/alsa-utils/scripts/soundconfig

@@ -37,103 +37,99 @@ if [ -f $HOME/.config/sound.conf ]; then
 
 else
 
+# get card num
+  card=`echo $1 | sed 's/[^0-9]*//g'`
+
 # set common mixer params
-  mixer 0 Master 100%
-  mixer 0 Front 100%
-  mixer 0 PCM 100%
-  mixer 0 Synth 100%
+  mixer $card Master 100%
+  mixer $card Front 100%
+  mixer $card PCM 100%
+  mixer $card Synth 100%
 
 # mute CD, since using digital audio instead
-  mixer 0 CD 0% mute
+  mixer $card CD 0% mute
 
 # Only unmute Line and Aux if they are possibly used.
-#  mixer 0 Line 100%
-#  mixer 0 Aux 100%
+#  mixer $card Line 100%
+#  mixer $card Aux 100%
 
 # mute mic
-  mixer 0 Mic 0% mute
+  mixer $card Mic 0% mute
 
 # ESS 1969 chipset has 2 PCM channels
-  mixer 0 PCM,1 100%
+  mixer $card PCM,1 100%
 
 # Trident/YMFPCI/emu10k1
-  mixer 0 Wave 100%
-  mixer 0 Music 100%
-  mixer 0 AC97 100%
-  mixer 0 Surround 90%
-  mixer 0 'Surround Digital' 90%
-  mixer 0 'Wave Surround' 90%
-  mixer 0 'Duplicate Front' 90%
-  mixer 0 'Sigmatel 4-Speaker Stereo' 90%
+  mixer $card Wave 100%
+  mixer $card Music 100%
+  mixer $card AC97 100%
+  mixer $card Surround 90%
+  mixer $card 'Surround Digital' 90%
+  mixer $card 'Wave Surround' 90%
+  mixer $card 'Duplicate Front' 90%
+  mixer $card 'Sigmatel 4-Speaker Stereo' 90%
 
 # CS4237B chipset:
-  mixer 0 'Master Digital' 100%
+  mixer $card 'Master Digital' 100%
 
 # DRC
-  mixer 0 'Dynamic Range Compression' 90%
+  mixer $card 'Dynamic Range Compression' 90%
 
 # Envy24 chips with analog outs
-  mixer 0 DAC 100%
-  mixer 0 DAC,0 100%
-  mixer 0 DAC,1 100%
+  mixer $card DAC 100%
+  mixer $card DAC,0 100%
+  mixer $card DAC,1 100%
 
 # some notebooks use headphone instead of master
-  mixer 0 Headphone 100%
-  mixer 0 Speaker 100%
-  mixer 0 'Internal Speaker' 0% mute
-  mixer 0 Playback 100%
-  mixer 1 Headphone 100%
-  mixer 1 Speaker 100%
-
-  mixer 0 Center 100%
-  mixer 0 LFE 100%
-  mixer 0 Center/LFE 100%
+  mixer $card Headphone 100%
+  mixer $card Speaker 100%
+  mixer $card 'Internal Speaker' 0% mute
+  mixer $card Playback 100%
+  mixer $card Headphone 100%
+  mixer $card Speaker 100%
+  mixer $card Center 100%
+  mixer $card LFE 100%
+  mixer $card Center/LFE 100%
 
 # Intel P4P800-MX  (Ubuntu bug #5813)
-  mixer 0 'Master Playback Switch' on
+  mixer $card 'Master Playback Switch' on
 
 # set digital output mixer params
-  mixer 0 'IEC958' 100% on
-  mixer 0 'IEC958 Output' 100%
-  mixer 0 'IEC958 Coaxial' 100%
-  mixer 0 'IEC958 LiveDrive' 100%
-  mixer 0 'IEC958 Optical Raw' 100%
-  mixer 0 'SPDIF Out' 100%
-  mixer 0 'SPDIF Front' 100%
-  mixer 0 'SPDIF Rear' 100%
-  mixer 0 'SPDIF Center/LFE' 100%
-  mixer 0 'Master Digital' 100%
+  mixer $card 'IEC958' 100% on
+  mixer $card 'IEC958 Output' 100%
+  mixer $card 'IEC958 Coaxial' 100%
+  mixer $card 'IEC958 LiveDrive' 100%
+  mixer $card 'IEC958 Optical Raw' 100%
+  mixer $card 'SPDIF Out' 100%
+  mixer $card 'SPDIF Front' 100%
+  mixer $card 'SPDIF Rear' 100%
+  mixer $card 'SPDIF Center/LFE' 100%
+  mixer $card 'Master Digital' 100%
 
-  mixer 0 'Analog Front' 100%
-  mixer 0 'Analog Rear' 100%
-  mixer 0 'Analog Center/LFE' 100%
+  mixer $card 'Analog Front' 100%
+  mixer $card 'Analog Rear' 100%
+  mixer $card 'Analog Center/LFE' 100%
 
 # ASRock ION 330 (and perhaps others) has 2 IEC958 channels
-  mixer 0 IEC958,0 on
-  mixer 0 IEC958,1 on
+  mixer $card IEC958,0 on
+  mixer $card IEC958,1 on
 
 # some ION2 has much more IEC958 channels ...
-  mixer 0 IEC958,2 on
-  mixer 0 IEC958,3 on
-
-# ... or "simply" more soundchips
-  mixer 1 IEC958,0 on
-  mixer 1 IEC958,1 on
-  mixer 1 IEC958,2 on
-  mixer 1 IEC958,3 on
+  mixer $card IEC958,2 on
+  mixer $card IEC958,3 on
 
 # ASRock ION 330 has Master Front set to 0
-  mixer 0 'Master Front' 100%
+  mixer $card 'Master Front' 100%
 
 # Shuttle XS35GT needs this too
-  mixer 0 'Master',0 100% on
+  mixer $card 'Master',0 100% on
 
 # and this for various Fusion devices like Zotac ZBOX
-  mixer 1 'Master',0 100% on
-  mixer 1 'Front',0 100% on
+  mixer $card 'Front',0 100% on
 
+# NVidia CK804 sound devices
+  mixer $card 'IEC958 Playback AC97-SPSA' 100%
 fi
 
 exit 0
 )&
-

packages/audio/alsa-utils/udev.d/90-alsa-restore.rules

@@ -17,4 +17,4 @@
 ################################################################################
 
 # When a sound device is detected, restore the volume settings
-  KERNEL=="controlC[0-9]*",  NAME="snd/%k", ACTION=="add", RUN+="soundconfig"
+  KERNEL=="controlC[0-9]*",  NAME="snd/%k", ACTION=="add", RUN+="soundconfig %k"

packages/audio/asplib/package.mk

@@ -0,0 +1,40 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2016 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+PKG_NAME="asplib"
+PKG_VERSION="2fac1bf"
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="GPL"
+PKG_SITE="https://github.com/AchimTuran/asplib"
+PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
+PKG_DEPENDS_TARGET="toolchain"
+PKG_PRIORITY="optional"
+PKG_SECTION="audio"
+PKG_SHORTDESC="asplib: Achim's Signal Processing LIBrary"
+PKG_LONGDESC="asplib is a small and lightweight C++ library for digital signal processing."
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+
+configure_target() {
+  cmake -DCMAKE_TOOLCHAIN_FILE=$CMAKE_CONF \
+    -DCMAKE_INSTALL_PREFIX=/usr -DBUILD_SHARED_LIBS=0 \
+    -DCMAKE_CXX_FLAGS="$CXXFLAGS -DTARGET_LINUX" \
+    ..
+}

packages/audio/asplib/patches/asplib-cmake.patch

@@ -0,0 +1,137 @@
+diff -Naur a/CMakeLists.txt b/CMakeLists.txt
+--- a/CMakeLists.txt	2016-01-12 22:24:43.000000000 +0100
++++ b/CMakeLists.txt	2016-01-12 22:47:16.624139358 +0100
+@@ -1,64 +1,17 @@
+ project(asplib)
+ 
+ cmake_minimum_required(VERSION 2.6)
+-enable_language(CXX)
+-
+-set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${PROJECT_SOURCE_DIR})
+-
+-include(UseMultiArch.cmake)
+ 
+ set(asplib_NAME asplib)
+ set(asplib_DESCRIPTION "asplib (Achim's Signal Processing LIBrary), is a small and lightweight C++ library for digital signal processing.")
+-set(asplib_VERSION_MAJOR ${APP_VERSION_MAJOR})
+-set(asplib_VERSION_MINOR ${APP_VERSION_MINOR})
+-set(asplib_VERSION_PATCH 0)
+-
+-if(NOT WIN32)
+-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fPIC")
+-endif()
+-
+-if(CMAKE_SYSTEM_NAME MATCHES "Linux")
+-  set(CMAKE_CXX_FLAGS "-DTARGET_LINUX")
+-endif()
+-
+-if(CMAKE_SYSTEM_NAME MATCHES "Windows")
+-  set(CMAKE_CXX_FLAGS "-DTARGET_WINDOWS")
+-endif()
+-
+-#set(asplib_INCLUDE_DIRS ${TINYXML_INCLUDE_DIR} "${CMAKE_INSTALL_PREFIX}/include/kodi")
+-#set(asplib_LIBRARIES ${CMAKE_THREAD_LIBS_INIT} ${TINYXML_LIBRARIES})
+-
+-if (NOT WIN32)
+-  add_definitions(-fPIC -g -O2)
+-endif()
+-
+-include_directories(${PROJECT_SOURCE_DIR}
+-                    ${PROJECT_SOURCE_DIR}/Biquads)
+ 
+-set(SOURCES asplib_utils/computeDeviceInfo/cpuInfo.cpp
+-            Biquads/Biquad_Native/asplib_Biquad_Native.cpp
++set(SOURCES Biquads/Biquad_Native/asplib_Biquad_Native.cpp
+             Biquads/apslib_BiquadFactory.cpp)
+ 
+-set(HEADERS interfaces/asplib_IBaseBiquad.h
+-            asplib_utils/constants_typedefs/asplib_constants.h
+-            asplib_utils/constants_typedefs/asplib_typedefs.h
+-            asplib_utils/os/asplib_base_os.h
+-            asplib_utils/os/windows/windows_definitions.h
+-            asplib_utils/os/linux/linux_definitions.h
+-            asplib_utils/computeDeviceInfo/cpuInfo_types.h
+-            asplib_utils/computeDeviceInfo/cpuInfo.h
+-            Biquads/apslib_BiquadFactory.h
+-            Biquads/Biquad_Native/asplib_Biquad_Native.h)
+-
+-
+-#include_directories(${TINYXML_INCLUDE_DIR} ${KODI_INCLUDE_DIR})
+-
+-add_library(asplib ${SOURCES} ${PLAT_SOURCES})
+-target_link_libraries(asplib ${asplib_LIBRARIES})
+-#set_target_properties(asplib PROPERTIES VERSION ${asplib_VERSION_MAJOR}.${asplib_VERSION_MINOR}.${asplib_VERSION_PATCH}
+-#                                              SOVERSION ${asplib_VERSION_MAJOR}.0)
++add_library(asplib STATIC ${SOURCES})
+ 
+-install(TARGETS asplib DESTINATION ${CMAKE_INSTALL_LIBDIR})
++include_directories(${PROJECT_SOURCE_DIR}
++                    ${PROJECT_SOURCE_DIR}/Biquads)
+ 
+ install(DIRECTORY ${PROJECT_SOURCE_DIR}/interfaces/ DESTINATION ${CMAKE_INSTALL_PREFIX}/include/asplib/interfaces
+         FILES_MATCHING PATTERN "*.h")
+@@ -66,8 +19,6 @@
+         FILES_MATCHING PATTERN "*.h")
+ install(DIRECTORY ${PROJECT_SOURCE_DIR}/asplib_utils/os/ DESTINATION ${CMAKE_INSTALL_PREFIX}/include/asplib/asplib_utils/os/
+         FILES_MATCHING PATTERN "*.h")
+-install(DIRECTORY ${PROJECT_SOURCE_DIR}/asplib_utils/os/windows/ DESTINATION ${CMAKE_INSTALL_PREFIX}/include/asplib/asplib_utils/os/windows/ 
+-        FILES_MATCHING PATTERN "*.h")
+ install(DIRECTORY ${PROJECT_SOURCE_DIR}/asplib_utils/os/linux/ DESTINATION ${CMAKE_INSTALL_PREFIX}/include/asplib/asplib_utils/os/linux/
+         FILES_MATCHING PATTERN "*.h")
+ install(DIRECTORY ${PROJECT_SOURCE_DIR}/asplib_utils/computeDeviceInfo/ DESTINATION ${CMAKE_INSTALL_PREFIX}/include/asplib/asplib_utils/computeDeviceInfo/
+@@ -77,54 +28,4 @@
+ install(DIRECTORY ${PROJECT_SOURCE_DIR}/Biquads/Biquad_Native/ DESTINATION ${CMAKE_INSTALL_PREFIX}/include/asplib/Biquads/Biquad_Native/
+         FILES_MATCHING PATTERN "*.h")
+ 
+-
+-# install(FILES interfaces/asplib_IBaseBiquad.h
+-              # asplib_utils/constants_typedefs/asplib_constants.h
+-              # asplib_utils/constants_typedefs/asplib_typedefs.h
+-      
+-              # DESTINATION include/asplib/asplib_utils/constants_typedefs/)
+-      
+-      # asplib_utils/os/asplib_base_os.h
+-      # asplib_utils/os/windows/windows_definitions.h
+-      # asplib_utils/os/linux/linux_definitions.h
+-      # utils/computeDeviceInfo/cpuInfo_types.h
+-      # utils/computeDeviceInfo/cpuInfo.h
+-      # Biquads/apslib_BiquadFactory.h
+-            # Biquads/Biquad_Native/asplib_Biquad_Native.h
+-      # )
+-
+-# install(FILES interfaces/asplib_IBaseBiquad.h
+-        # DESTINATION include/asplib/interfaces)
+-# install(FILES constants_typedefs/asplib_constants.h
+-              # constants_typedefs/asplib_typedefs.h
+-        # DESTINATION include/asplib/constants_typedefs)
+-# install(FILES utils/computeDeviceInfo/cpuInfo_types.h
+-              # utils/computeDeviceInfo/cpuInfo.h
+-        # DESTINATION include/asplib/utils)
+-# install(FILES Biquads/apslib_BiquadFactory.h
+-              # Biquads/Biquad_Native/asplib_Biquad_Native.h
+-        # DESTINATION include/asplib/Biquads)
+-        
+-#install(FILES ${HEADERS} DESTINATION ${CMAKE_INSTALL_PREFIX}/include/asplib)
+-
+-#IF(NOT WIN32)
+-  # Pkgconfig
+-  #include(PkgConfigHandler.cmake)
+-  #configure_pc_file(kodiutilities kodiutilities.pc.in
+-  #                              kodiutilities.pc
+-  #                               ${CMAKE_INSTALL_PREFIX}
+-  #                               ${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}
+-  #                               ${CMAKE_INSTALL_PREFIX}/include)
+-
+-#  install(FILES ${CMAKE_BINARY_DIR}/kodiutilities.pc
+-#          DESTINATION ${CMAKE_INSTALL_LIBDIR_NOARCH}/pkgconfig)
+-#ENDIF(NOT WIN32)
+-
+-# config mode
+-#configure_file (kodiutilities-config.cmake.in
+-#                kodiutilities-config.cmake @ONLY)
+-#install(FILES ${CMAKE_BINARY_DIR}/kodiutilities-config.cmake
+-#       DESTINATION ${CMAKE_INSTALL_LIBDIR_NOARCH}/kodiutilities)
+-
+-# Quell warnings with in-tree builds
+-#set(KODI_BUILD_DIR ${KODI_BUILD_DIR})
++install(TARGETS asplib DESTINATION ${CMAKE_INSTALL_PREFIX}/lib)

packages/audio/dcadec/package.mk

@@ -1,6 +1,6 @@
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#      Copyright (C) 2009-2016 Stephan Raue ([email protected])
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -16,28 +16,32 @@
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
 
-PKG_NAME="faad2"
-PKG_VERSION="2.7"
+PKG_NAME="dcadec"
+PKG_VERSION="37d8e68"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
-PKG_SITE="http://www.audiocoding.com/"
-PKG_URL="$SOURCEFORGE_SRC/faac/faad2-src/$PKG_NAME-$PKG_VERSION/$PKG_NAME-$PKG_VERSION.tar.gz"
+PKG_SITE="https://github.com/foo86/dcadec"
+PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
 PKG_DEPENDS_TARGET="toolchain"
 PKG_PRIORITY="optional"
 PKG_SECTION="audio"
-PKG_SHORTDESC="faad: An MPEG-4 AAC decoder"
-PKG_LONGDESC="The FAAD project includes the AAC decoder FAAD2. It supports several MPEG-4 object types (LC, Main, LTP, HE AAC, PS) and file formats (ADTS AAC, raw AAC, MP4), multichannel and gapless decoding as well as MP4 metadata tags. The codecs are compatible with standard-compliant audio applications using one or more of these profiles."
+PKG_SHORTDESC="DTS Coherent Acoustics decoder with support for HD extensions"
+PKG_LONGDESC="DTS Coherent Acoustics decoder with support for HD extensions"
 
 PKG_IS_ADDON="no"
-PKG_AUTORECONF="yes"
+PKG_AUTORECONF="no"
 
-# package specific configure options
-PKG_CONFIGURE_OPTS_TARGET="--without-xmms \
-                           --without-drm \
-                           --without-mpeg4ip \
-                           --with-gnu-ld"
+# todo: we need to build as shared library, otherwise sond dont work
+# in kodi with enabled dcadec support and we have 100% CPU usage
+# (to test disable passtrough and use a DTS-HD sample)
+PKG_MAKE_OPTS_TARGET="PREFIX=/usr BINDIR=/usr/bin LIBDIR=/usr/lib INCLUDEDIR=/usr/include PKG_CONFIG_PATH=/usr/lib/pkgconfig CONFIG_SHARED=1"
+PKG_MAKEINSTALL_OPTS_TARGET="$PKG_MAKE_OPTS_TARGET"
 
+pre_configure_target() {
+  export CFLAGS="$CFLAGS -fPIC -DPIC"
+  export LDFLAGS="$LDFLAGS -fPIC -DPIC"
+}
 
 post_makeinstall_target() {
   rm -rf $INSTALL/usr/bin