Hide updater

Apply RT patch and update i386 and x64 linux config files.

TODO

@@ -1,8 +0,0 @@
-ncurses-5.8/5.9:
-  - segfaults in nano and dialog -> using ncurses-5.7
-
-irserver:
-  - rework irserver/init.d for systemd
-
-settings addon:
-  - remove ps3 sleep? should be fixed in bluez 5.13/5.14

config/arch.aarch64

@@ -1,32 +1,29 @@
 # determines TARGET_CPU, if not forced by user
   if [ -z "$TARGET_CPU" ]; then
-    TARGET_CPU=generic
+    TARGET_CPU=cortex-a53
   fi
 
 # TARGET_CPU:
-# cortex-a35 cortex-a53 cortex-a57 cortex-a72 exynos-m1
-# qdf24xx thunderx xgene1
-
-# TARGET_FPU:
-# This specifies what floating point hardware (or hardware emulation) is
-# available on the target. Permissible names are:
-# fpa fpe2 fpe3 maverick vfp vfpv3 vfpv3-fp16 vfpv3-d16 vfpv3-d16-fp16
-# vfpv3xd vfpv3xd-fp16 neon neon-fp16 vfpv4 vfpv4-d16 fpv4-sp-d16
-# neon-vfpv4.
+# generic cortex-a35 cortex-a53 cortex-a57 cortex-a72
+# exynos-m1 qdf24xx thunderx xgene1 cortex-a57.cortex-a53
+# cortex-a72.cortex-a53
 
 # determine architecture's family
   case $TARGET_CPU in
-    *)
+    generic|cortex-a35|cortex-a53|cortex-a57|cortex-a72|exynos-m1|qdf24xx|thunderx|xgene1|cortex-a57.cortex-a53|cortex-a72.cortex-a53)
       TARGET_SUBARCH=aarch64
       TARGET_VARIANT=armv8-a
+      TARGET_ABI=eabi
       TARGET_CPU_FLAGS="+crc+crypto"
-      TARGET_EXTRA_FLAGS="-mcpu=$TARGET_CPU$TARGET_CPU_FLAGS"
-      TARGET_FPU=neon
+      TARGET_EXTRA_FLAGS="-mcpu=${TARGET_CPU}${TARGET_CPU_FLAGS}"
       SIMD_SUPPORT="yes"
       ;;
   esac
 
+  TARGET_GCC_ARCH=${TARGET_SUBARCH/-}
+  TARGET_KERNEL_ARCH=arm64
+
 # setup ARCH specific *FLAGS
-  TARGET_CFLAGS="-march=$TARGET_VARIANT $TARGET_EXTRA_FLAGS"
-  [ -n "$TARGET_FPU" ] && TARGET_CFLAGS="$TARGET_CFLAGS $TARGET_FPU_FLAGS"
-  TARGET_LDFLAGS="-march=$TARGET_VARIANT -mcpu=$TARGET_CPU$TARGET_CPU_FLAGS"
+  TARGET_CFLAGS="-march=${TARGET_VARIANT}${TARGET_CPU_FLAGS} -mabi=lp64 -Wno-psabi $TARGET_EXTRA_FLAGS"
+  TARGET_LDFLAGS="-march=${TARGET_VARIANT}${TARGET_CPU_FLAGS} -mtune=$TARGET_CPU"
+  GCC_OPTS="--with-abi=lp64 --with-arch=$TARGET_VARIANT"

config/graphic

@@ -90,7 +90,7 @@ get_graphicdrivers() {
 
     if [ "$drv" = "radeonsi" ]; then
       GALLIUM_DRIVERS="$GALLIUM_DRIVERS,radeonsi"
-      XORG_DRIVERS="$XORG_DRIVERS ati"
+      XORG_DRIVERS="$XORG_DRIVERS ati amdgpu"
       LLVM_SUPPORT="yes"
       COMPOSITE_SUPPORT="yes"
       VDPAU_SUPPORT="yes"

distributions/EMU/options

@@ -0,0 +1,338 @@
+# Name of the Distro to build (full name, without special characters)
+  DISTRONAME="EMU"
+
+# short project description
+  DESCRIPTION="The DIY retro emulation console"
+
+# Welcome Message for e.g. SSH Server (up to 5 Lines)
+  GREETING0="###########################################"
+  GREETING1="# Lakka - The DIY retro emulation console #"
+  GREETING2="# ...... visit http://www.lakka.tv ...... #"
+  GREETING3="###########################################"
+  GREETING4=""
+
+# Root password to integrate in the target system
+  ROOT_PASSWORD="root"
+
+# Mediacenter to use (kodi / no)
+  MEDIACENTER="no"
+
+# Skins to install (Confluence)
+# Space separated list is supported,
+# e.g. SKINS="Confluence"
+  SKINS="Confluence"
+
+# Default Skin (Confluence)
+  SKIN_DEFAULT="Confluence"
+
+# install extra subtitle Fonts for KODI (yes / no)
+  KODI_EXTRA_FONTS="yes"
+
+# build and install 'RSXS' Screensaver (yes / no)
+  KODI_SCR_RSXS="yes"
+
+# build and install 'ProjectM' Visualization (yes / no)
+  KODI_VIS_PROJECTM="yes"
+
+# build and install 'GOOM' Visualization (yes / no)
+  KODI_VIS_GOOM="yes"
+
+# build and install 'Waveform' Visualization (yes / no)
+  KODI_VIS_WAVEFORM="yes"
+
+# build and install 'Spectrum' Visualization (yes / no)
+  KODI_VIS_SPECTRUM="yes"
+
+# build and install 'FishBMC' Visualization (yes / no)
+  # does not work on RPi
+  KODI_VIS_FISHBMC="yes"
+
+# build and install PulseAudio support (yes / no)
+  PULSEAUDIO_SUPPORT="no"
+
+# build and install espeak support (yes / no)
+  ESPEAK_SUPPORT="yes"
+
+# build and install with non-free support
+# (RAR compression support in KODI) (yes / no)
+  KODI_NONFREE_SUPPORT="yes"
+
+# build and install with BluRay support (yes / no)
+  KODI_BLURAY_SUPPORT="yes"
+
+# build and install with BD+ support
+# (BD+ decryption support in KODI) (yes / no)
+  BLURAY_BDPLUS_SUPPORT="yes"
+
+# build and install with AACS support
+# (BD decryption support in KODI) (yes / no)
+  BLURAY_AACS_SUPPORT="yes"
+
+# build and install with DVDCSS support
+# (DVD decryption support in KODI) (yes / no)
+  KODI_DVDCSS_SUPPORT="yes"
+
+# additional drivers to install:
+# for a list of additinoal drivers see packages/linux-drivers
+# Space separated list is supported,
+# e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"
+  ADDITIONAL_DRIVERS="RTL8192CU RTL8192DU RTL8192EU RTL8188EU RTL8812AU"
+
+# build and install bluetooth support (yes / no)
+  BLUETOOTH_SUPPORT="yes"
+
+# build and install with KODI webfrontend (yes / no)
+  KODI_WEBSERVER_SUPPORT="yes"
+
+# build and install Avahi (Zeroconf) daemon (yes / no)
+  AVAHI_DAEMON="yes"
+
+# build with UPnP support (yes / no)
+  KODI_UPNP_SUPPORT="yes"
+
+# build with MySQL support (yes / no)
+  KODI_MYSQL_SUPPORT="yes"
+
+# build xbmc with sshlib support (yes / no)
+  KODI_SSHLIB_SUPPORT="yes"
+
+# build xbmc with optical drive support (yes / no)
+  KODI_OPTICAL_SUPPORT="yes"
+
+# KODI Audio encoders for usage with optical drive support
+# Space separated list is supported,
+# e.g. KODI_AUDIOENCODER_ADDONS="ENCODER1 ENCODER2"
+  KODI_AUDIOENCODER_ADDONS="flac lame vorbis wav"
+
+# build with AirPlay support (stream videos from iDevices to KODI) (yes / no)
+  KODI_AIRPLAY_SUPPORT="yes"
+
+# build with AirTunes support (stream music from iDevices to KODI) (yes / no)
+  KODI_AIRTUNES_SUPPORT="yes"
+
+# build with libnfs support (mounting nfs shares with KODI) (yes / no)
+  KODI_NFS_SUPPORT="yes"
+
+# build with afpfs-ng support (mounting AFP shares with KODI) (yes / no)
+  KODI_AFP_SUPPORT="no"
+
+# build with Samba Client support (mounting SAMBA shares with KODI) (yes / no)
+  KODI_SAMBA_SUPPORT="yes"
+
+# build with NFS support (mounting nfs shares via the OS) (yes / no)
+  NFS_SUPPORT="yes"
+
+# build with Samba Client support (mounting samba shares via the OS) (yes / no)
+  SAMBA_SUPPORT="yes"
+
+# build and install Samba Server (yes / no)
+  SAMBA_SERVER="yes"
+
+# build and install SFTP Server (yes / no)
+  SFTP_SERVER="yes"
+
+# build and install PPP support (yes / no)
+  PPTP_SUPPORT="yes"
+
+# build and install OpenVPN support (yes / no)
+  OPENVPN_SUPPORT="yes"
+
+# build and install diskmounter support (udevil)
+# this service provide auto mounting support for external drives in the
+# mediacenter also automount internally drives at boottime via udev (yes / no)
+  UDEVIL="yes"
+
+# build and install exFAT fuse support (yes / no)
+  EXFAT="yes"
+
+# build and install NTFS-3G fuse support (yes / no)
+  NTFS3G="yes"
+
+# build and install hfs filesystem utilities (yes / no)
+  HFSTOOLS="yes"
+
+# Windowmanager to use (ratpoison / fluxbox / none)
+  WINDOWMANAGER="none"
+
+# Xorg Graphic drivers to use (all / i915,i965,r200,r300,r600,nvidia,nouveau)
+# Space separated list is supported,
+# e.g. GRAPHIC_DRIVERS="i915 i965 r300 r600 radeonsi nvidia nouveau"
+  if [ "$TARGET_ARCH" = "i386" ]; then
+    # TODO: create Legacy build with OpenELEC-4.2
+    # install legacy drivers to i386 ARCH
+    GRAPHIC_DRIVERS="r200 r300 r600 i915 i965 nouveau"
+  elif [ "$TARGET_ARCH" = "x86_64" ]; then
+    GRAPHIC_DRIVERS="r300 r600 radeonsi i915 i965 nouveau"
+  fi
+
+# build and install remote support (yes / no)
+  REMOTE_SUPPORT="no"
+
+# build and install ATV IR remote support (yes / no)
+  ATVCLIENT_SUPPORT="no"
+
+# build and install IRServer IR/LCD support (yes / no)
+  IRSERVER_SUPPORT="no"
+
+# build and install Joystick support (yes / no)
+  JOYSTICK_SUPPORT="yes"
+
+# build and install CEC adapter support (yes / no)
+  CEC_SUPPORT="yes"
+
+# build and install iSCSI support - iscsistart (yes / no)
+  ISCSI_SUPPORT="yes"
+
+# LCD driver to Use - Possible drivers are ( Comma seperated:
+# bayrad,CFontz,CFontz633,CFontzPacket,curses,CwLnx,dm140,
+# ea65,EyeboxOne,g15,glcdlib,glk,hd44780,i2500vfd,
+# icp_a106,imon,imonlcd,IOWarrior,irman,irtrans,
+# joy,lb216,lcdm001,lcterm,lirc,lis,MD8800,mdm166a,
+# ms6931,mtc_s16209x,MtxOrb,mx5000,NoritakeVFD,
+# picolcd,pyramid,sed1330,sed1520,serialPOS,
+# serialVFD,shuttleVFD,sli,stv5730,SureElec,svga,vlsys_m428
+# 'all' compiles all drivers;
+# 'all,!xxx,!yyy' de-selects previously selected drivers
+# "none" for disable LCD support
+  LCD_DRIVER="irtrans,imon,imonlcd,mdm166a,MtxOrb,lis,dm140,hd44780,CFontz,SureElec,vlsys_m428,serialVFD,shuttleVFD"
+
+# Support for partitioning and formating disks in initramfs (yes / no)
+# This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
+  INITRAMFS_PARTED_SUPPORT="no"
+
+# build with swap support (yes / no)
+  SWAP_SUPPORT="no"
+
+# swap support enabled per default (yes / no)
+  SWAP_ENABLED_DEFAULT="no"
+
+# swapfile size if SWAP_SUPPORT=yes in MB
+  SWAPFILESIZE="256"
+
+# build with installer (yes / no)
+  INSTALLER_SUPPORT="yes"
+
+# Testpackages for development (yes / no)
+  TESTING="no"
+
+# OEM packages for OEM's (yes / no)
+  OEM_SUPPORT="yes"
+
+# build and install nano text editor (yes / no)
+  NANO_EDITOR="yes"
+
+# cron support (yes / no)
+  CRON_SUPPORT="yes"
+
+# Perf support in development builds (yes / no)
+  PERF_SUPPORT="yes"
+
+# Distribution Specific source location
+  DISTRO_MIRROR="http://sources.openelec.tv/mirror"
+  DISTRO_SRC="http://sources.openelec.tv/$OPENELEC_VERSION"
+
+# Addon Server Url
+  ADDON_SERVER_URL="http://addons.openelec.tv"
+
+# set the addon dirs
+  ADDON_PATH="$ADDON_VERSION/$PROJECT/$TARGET_ARCH"
+  ADDON_URL="$ADDON_SERVER_URL/$ADDON_PATH"
+
+  LAKKA_MIRROR="http://sources.lakka.tv"
+  RA_PLAYLIST_NAMES=""\
+"Atari - 2600.lpl;"\
+"Atari - 5200.lpl;"\
+"Atari - 7800.lpl;"\
+"Atari - Jaguar.lpl;"\
+"Atari - Lynx.lpl;"\
+"Atari - ST.lpl;"\
+"Bandai - WonderSwan Color.lpl;"\
+"Bandai - WonderSwan.lpl;"\
+"Cave Story.lpl;"\
+"Coleco - ColecoVision.lpl;"\
+"DOOM.lpl;"\
+"FB Alpha - Arcade Games.lpl;"\
+"GCE - Vectrex.lpl;"\
+"Lutro.lpl;"\
+"Magnavox - Odyssey2.lpl;"\
+"MAME.lpl;"\
+"Microsoft - MSX2.lpl;"\
+"Microsoft - MSX.lpl;"\
+"NEC - PC Engine SuperGrafx.lpl;"\
+"NEC - PC Engine - TurboGrafx 16.lpl;"\
+"Nintendo - Famicom Disk System.lpl;"\
+"Nintendo - Game Boy Advance (e-Cards).lpl;"\
+"Nintendo - Game Boy Advance.lpl;"\
+"Nintendo - Game Boy Color.lpl;"\
+"Nintendo - Game Boy.lpl;"\
+"Nintendo - Nintendo 64.lpl;"\
+"Nintendo - Nintendo DS Decrypted.lpl;"\
+"Nintendo - Nintendo DS (Download Play) (BETA).lpl;"\
+"Nintendo - Nintendo DSi Decrypted.lpl;"\
+"Nintendo - Nintendo DSi (DLC).lpl;"\
+"Nintendo - Nintendo Entertainment System.lpl;"\
+"Nintendo - Satellaview.lpl;"\
+"Nintendo - Super Nintendo Entertainment System.lpl;"\
+"Nintendo - Virtual Boy.lpl;"\
+"Quake1.lpl;"\
+"ScummVM.lpl;"\
+"Sega - 32X.lpl;"\
+"Sega - Game Gear.lpl;"\
+"Sega - Master System - Mark III.lpl;"\
+"Sega - Mega Drive - Genesis.lpl;"\
+"Sega - PICO.lpl;"\
+"Sega - SG-1000.lpl;"\
+"Sinclair - ZX Spectrum +3.lpl;"\
+"SNK - Neo Geo Pocket Color.lpl;"\
+"SNK - Neo Geo Pocket.lpl;"\
+"Sony - PlayStation Portable.lpl;"\
+"Sony - PlayStation.lpl"
+
+  RA_PLAYLIST_CORES=""\
+"/tmp/cores/stella_libretro.so;"\
+"DETECT;"\
+"/tmp/cores/prosystem_libretro.so;"\
+"/tmp/cores/virtualjaguar_libretro.so;"\
+"/tmp/cores/handy_libretro.so;"\
+"/tmp/cores/hatari_libretro.so;"\
+"/tmp/cores/mednafen_wswan_libretro.so;"\
+"/tmp/cores/mednafen_wswan_libretro.so;"\
+"/tmp/cores/nxengine_libretro.so;"\
+"/tmp/cores/bluemsx_libretro.so;"\
+"/tmp/cores/prboom_libretro.so;"\
+"/tmp/cores/fba_libretro.so;"\
+"/tmp/cores/vecx_libretro.so;"\
+"/tmp/cores/lutro_libretro.so;"\
+"/tmp/cores/o2em_libretro.so;"\
+"/tmp/cores/mame_libretro.so;"\
+"/tmp/cores/bluemsx_libretro.so;"\
+"/tmp/cores/bluemsx_libretro.so;"\
+"/tmp/cores/mednafen_supergrafx_libretro.so;"\
+"/tmp/cores/mednafen_pce_fast_libretro.so;"\
+"/tmp/cores/nestopia_libretro.so;"\
+"/tmp/cores/mgba_libretro.so;"\
+"/tmp/cores/mgba_libretro.so;"\
+"/tmp/cores/gambatte_libretro.so;"\
+"/tmp/cores/gambatte_libretro.so;"\
+"/tmp/cores/mupen64plus_libretro.so;"\
+"/tmp/cores/desmume_libretro.so;"\
+"/tmp/cores/desmume_libretro.so;"\
+"/tmp/cores/desmume_libretro.so;"\
+"/tmp/cores/desmume_libretro.so;"\
+"/tmp/cores/nestopia_libretro.so;"\
+"/tmp/cores/snes9x_next_libretro.so;"\
+"/tmp/cores/snes9x_next_libretro.so;"\
+"/tmp/cores/mednafen_vb_libretro.so;"\
+"/tmp/cores/tyrquake_libretro.so;"\
+"/tmp/cores/scummvm_libretro.so;"\
+"/tmp/cores/picodrive_libretro.so;"\
+"/tmp/cores/genesis_plus_gx_libretro.so;"\
+"/tmp/cores/genesis_plus_gx_libretro.so;"\
+"/tmp/cores/genesis_plus_gx_libretro.so;"\
+"/tmp/cores/picodrive_libretro.so;"\
+"/tmp/cores/genesis_plus_gx_libretro.so;"\
+"/tmp/cores/fuse_libretro.so;"\
+"/tmp/cores/mednafen_ngp_libretro.so;"\
+"/tmp/cores/mednafen_ngp_libretro.so;"\
+"/tmp/cores/ppsspp_libretro.so;"\
+"/tmp/cores/pcsx_rearmed_libretro.so"

distributions/EMU/packages/busybox/config/httpd.conf

@@ -0,0 +1,46 @@
+# httpd.conf has the following format:
+#
+# H:/serverroot     # define the server root. It will override -h
+# A:172.20.         # Allow address from 172.20.0.0/16
+# A:10.0.0.0/25     # Allow any address from 10.0.0.0-10.0.0.127
+# A:10.0.0.0/255.255.255.128  # Allow any address that previous set
+# A:127.0.0.1       # Allow local loopback connections
+# D:*               # Deny from other IP connections
+# E404:/path/e404.html # /path/e404.html is the 404 (not found) error page
+# I:index.html      # Show index.html when a directory is requested
+#
+# P:/url:[http://]hostname[:port]/new/path
+#                   # When /urlXXXXXX is requested, reverse proxy
+#                   # it to http://hostname[:port]/new/pathXXXXXX
+#
+# /cgi-bin:foo:bar  # Require user foo, pwd bar on urls starting with /cgi-bin/
+# /adm:admin:setup  # Require user admin, pwd setup on urls starting with /adm/
+# /adm:toor:PaSsWd  # or user toor, pwd PaSsWd on urls starting with /adm/
+# .au:audio/basic   # additional mime type for audio.au files
+# *.php:/path/php   # run xxx.php through an interpreter
+#
+# A/D may be as a/d or allow/deny - only first char matters.
+# Deny/Allow IP logic:
+#  - Default is to allow all (Allow all (A:*) is a no-op).
+#  - Deny rules take precedence over allow rules.
+#  - "Deny all" rule (D:*) is applied last.
+#
+# Example:
+#   1. Allow only specified addresses
+#     A:172.20          # Allow any address that begins with 172.20.
+#     A:10.10.          # Allow any address that begins with 10.10.
+#     A:127.0.0.1       # Allow local loopback connections
+#     D:*               # Deny from other IP connections
+#
+#   2. Only deny specified addresses
+#     D:1.2.3.        # deny from 1.2.3.0 - 1.2.3.255
+#     D:2.3.4.        # deny from 2.3.4.0 - 2.3.4.255
+#     A:*             # (optional line added for clarity)
+#
+
+H:/usr/www                   # define the server root. It will override -h
+A:*                          # Allow address from all ip's
+E404:/usr/www/error/404.html # /path/e404.html is the 404 (not found) error page
+I:index.html                 # Show index.html when a directory is requested
+
+*.php:/usr/bin/php-cgi

distributions/EMU/packages/busybox/config/inputrc

@@ -0,0 +1,66 @@
+# /etc/inputrc - global inputrc for libreadline
+# See readline(3readline) and `info rluserman' for more information.
+
+# Be 8 bit clean.
+set input-meta on
+set output-meta on
+
+# To allow the use of 8bit-characters like the german umlauts, uncomment
+# the line below. However this makes the meta key not work as a meta key,
+# which is annoying to those which don't need to type in 8-bit characters.
+
+# set convert-meta off
+
+# try to enable the application keypad when it is called.  Some systems
+# need this to enable the arrow keys.
+# set enable-keypad on
+
+# see /usr/share/doc/bash/inputrc.arrows for other codes of arrow keys
+
+# do not bell on tab-completion
+# set bell-style none
+# set bell-style visible
+
+# some defaults / modifications for the emacs mode
+$if mode=emacs
+
+# allow the use of the Home/End keys
+"\e[1~": beginning-of-line
+"\e[4~": end-of-line
+
+# allow the use of the Delete/Insert keys
+"\e[3~": delete-char
+"\e[2~": quoted-insert
+
+# mappings for "page up" and "page down" to step to the beginning/end
+# of the history
+# "\e[5~": beginning-of-history
+# "\e[6~": end-of-history
+
+# alternate mappings for "page up" and "page down" to search the history
+# "\e[5~": history-search-backward
+# "\e[6~": history-search-forward
+
+# mappings for Ctrl-left-arrow and Ctrl-right-arrow for word moving
+"\e[1;5C": forward-word
+"\e[1;5D": backward-word
+"\e[5C": forward-word
+"\e[5D": backward-word
+"\e\e[C": forward-word
+"\e\e[D": backward-word
+
+$if term=rxvt
+"\e[8~": end-of-line
+"\eOc": forward-word
+"\eOd": backward-word
+$endif
+
+# for non RH/Debian xterm, can't hurt for RH/Debian xterm
+# "\eOH": beginning-of-line
+# "\eOF": end-of-line
+
+# for freebsd console
+# "\e[H": beginning-of-line
+# "\e[F": end-of-line
+
+$endif

distributions/EMU/packages/busybox/config/profile

@@ -0,0 +1,49 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+# parse command line arguments
+  for arg in $(cat /proc/cmdline); do
+    case $arg in
+      debugging)
+        export DEBUG=yes
+        ;;
+      progress)
+        PROGRESS=yes
+        ;;
+    esac
+  done
+
+  if [ -e /storage/.cache/debug.openelec ] ; then
+    export DEBUG=yes
+  fi
+
+# functions
+  progress() {
+    if test "$PROGRESS" = yes; then
+      logger -s -t Boot "### $1 ###"
+    else
+      logger -t Boot "### $1 ###"
+    fi
+  }
+
+# read config files
+  for config in /etc/profile.d/*; do
+    if [ -f "$config" ] ; then
+      . $config
+    fi
+  done

distributions/EMU/packages/busybox/config/suspend-modules.conf

@@ -0,0 +1 @@
+SUSPEND_MODULES="jme asix anysee rtl8192se imon r8712u cx23885 cdc_acm ddbridge brcmfmac"

distributions/EMU/packages/busybox/config/transmission.conf

@@ -0,0 +1,5 @@
+# transmission with uTP support
+# please comment out the follow line to activate this values:
+
+# net.core.wmem_max=1048576
+# net.core.rmem_max=4194304

distributions/EMU/packages/busybox/package.mk

@@ -0,0 +1,256 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+PKG_NAME="busybox"
+PKG_VERSION="1.23.1"
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="GPL"
+PKG_SITE="http://www.busybox.net"
+PKG_URL="http://busybox.net/downloads/$PKG_NAME-$PKG_VERSION.tar.bz2"
+PKG_DEPENDS_HOST=""
+PKG_DEPENDS_TARGET="toolchain busybox:host hdparm dosfstools e2fsprogs zip unzip pciutils usbutils parted"
+PKG_DEPENDS_INIT="toolchain"
+PKG_PRIORITY="required"
+PKG_SECTION="system"
+PKG_SHORTDESC="BusyBox: The Swiss Army Knife of Embedded Linux"
+PKG_LONGDESC="BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides replacements for most of the utilities you usually find in GNU fileutils, shellutils, etc. The utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options that are included provide the expected functionality and behave very much like their GNU counterparts. BusyBox provides a fairly complete environment for any small or embedded system."
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+
+PKG_MAKE_OPTS_HOST="ARCH=$TARGET_ARCH CROSS_COMPILE= KBUILD_VERBOSE=1 install"
+PKG_MAKE_OPTS_TARGET="ARCH=$TARGET_ARCH \
+                      HOSTCC=$HOST_CC \
+                      CROSS_COMPILE=$TARGET_PREFIX \
+                      KBUILD_VERBOSE=1 \
+                      install"
+PKG_MAKE_OPTS_INIT="ARCH=$TARGET_ARCH \
+                    HOSTCC=$HOST_CC \
+                    CROSS_COMPILE=$TARGET_PREFIX \
+                    KBUILD_VERBOSE=1 \
+                    install"
+
+# nano text editor
+  if [ "$NANO_EDITOR" = "yes" ]; then
+    PKG_DEPENDS_TARGET="$PKG_DEPENDS_TARGET nano"
+  fi
+
+# nfs support
+if [ "$NFS_SUPPORT" = yes ]; then
+  PKG_DEPENDS_TARGET="$PKG_DEPENDS_TARGET rpcbind"
+fi
+
+if [ -f $PROJECT_DIR/$PROJECT/busybox/busybox-target.conf ]; then
+  BUSYBOX_CFG_FILE_TARGET=$PROJECT_DIR/$PROJECT/busybox/busybox-target.conf
+else
+  BUSYBOX_CFG_FILE_TARGET=$PKG_DIR/config/busybox-target.conf
+fi
+
+if [ -f $PROJECT_DIR/$PROJECT/busybox/busybox-init.conf ]; then
+  BUSYBOX_CFG_FILE_INIT=$PROJECT_DIR/$PROJECT/busybox/busybox-init.conf
+else
+  BUSYBOX_CFG_FILE_INIT=$PKG_DIR/config/busybox-init.conf
+fi
+
+pre_build_target() {
+  mkdir -p $PKG_BUILD/.$TARGET_NAME
+  cp -RP $PKG_BUILD/* $PKG_BUILD/.$TARGET_NAME
+}
+
+pre_build_host() {
+  mkdir -p $PKG_BUILD/.$HOST_NAME
+  cp -RP $PKG_BUILD/* $PKG_BUILD/.$HOST_NAME
+}
+
+pre_build_init() {
+  mkdir -p $PKG_BUILD/.$TARGET_NAME-init
+  cp -RP $PKG_BUILD/* $PKG_BUILD/.$TARGET_NAME-init
+}
+
+configure_host() {
+  cd $ROOT/$PKG_BUILD/.$HOST_NAME
+    cp $PKG_DIR/config/busybox-host.conf .config
+
+    # set install dir
+    sed -i -e "s|^CONFIG_PREFIX=.*$|CONFIG_PREFIX=\"$ROOT/$PKG_BUILD/.install_host\"|" .config
+
+    make oldconfig
+}
+
+configure_target() {
+  cd $ROOT/$PKG_BUILD/.$TARGET_NAME
+    cp $BUSYBOX_CFG_FILE_TARGET .config
+
+    # set install dir
+    sed -i -e "s|^CONFIG_PREFIX=.*$|CONFIG_PREFIX=\"$INSTALL\"|" .config
+
+    if [ ! "$DEVTOOLS" = yes ]; then
+      sed -i -e "s|^CONFIG_DEVMEM=.*$|# CONFIG_DEVMEM is not set|" .config
+    fi
+
+    if [ ! "$CRON_SUPPORT" = "yes" ] ; then
+      sed -i -e "s|^CONFIG_CROND=.*$|# CONFIG_CROND is not set|" .config
+      sed -i -e "s|^CONFIG_FEATURE_CROND_D=.*$|# CONFIG_FEATURE_CROND_D is not set|" .config
+      sed -i -e "s|^CONFIG_CRONTAB=.*$|# CONFIG_CRONTAB is not set|" .config
+    fi
+
+    if [ ! "$NFS_SUPPORT" = yes ]; then
+      sed -i -e "s|^CONFIG_FEATURE_MOUNT_NFS=.*$|# CONFIG_FEATURE_MOUNT_NFS is not set|" .config
+    fi
+
+    if [ ! "$SAMBA_SUPPORT" = yes ]; then
+      sed -i -e "s|^CONFIG_FEATURE_MOUNT_CIFS=.*$|# CONFIG_FEATURE_MOUNT_CIFS is not set|" .config
+    fi
+
+    # optimize for size
+    CFLAGS=`echo $CFLAGS | sed -e "s|-Ofast|-Os|"`
+    CFLAGS=`echo $CFLAGS | sed -e "s|-O.|-Os|"`
+
+    # busybox fails to build with GOLD support enabled with binutils-2.25
+    strip_gold
+
+    LDFLAGS="$LDFLAGS -fwhole-program"
+
+    make oldconfig
+}
+
+configure_init() {
+  cd $ROOT/$PKG_BUILD/.$TARGET_NAME-init
+    cp $BUSYBOX_CFG_FILE_INIT .config
+
+    # set install dir
+    sed -i -e "s|^CONFIG_PREFIX=.*$|CONFIG_PREFIX=\"$INSTALL\"|" .config
+
+    # optimize for size
+    CFLAGS=`echo $CFLAGS | sed -e "s|-Ofast|-Os|"`
+    CFLAGS=`echo $CFLAGS | sed -e "s|-O.|-Os|"`
+
+    # busybox fails to build with GOLD support enabled with binutils-2.25
+    strip_gold
+
+    LDFLAGS="$LDFLAGS -fwhole-program"
+
+    make oldconfig
+}
+
+makeinstall_host() {
+  mkdir -p $ROOT/$TOOLCHAIN/bin
+    cp -R $ROOT/$PKG_BUILD/.install_host/bin/* $ROOT/$TOOLCHAIN/bin
+}
+
+makeinstall_target() {
+  mkdir -p $INSTALL/usr/bin
+    cp $PKG_DIR/scripts/createlog $INSTALL/usr/bin/
+    cp $PKG_DIR/scripts/lsb_release $INSTALL/usr/bin/
+    cp $PKG_DIR/scripts/apt-get $INSTALL/usr/bin/
+    cp $PKG_DIR/scripts/passwd $INSTALL/usr/bin/
+    cp $PKG_DIR/scripts/sudo $INSTALL/usr/bin/
+    ln -sf /bin/busybox $INSTALL/usr/bin/env          #/usr/bin/env is needed for most python scripts
+    cp $PKG_DIR/scripts/pastebinit $INSTALL/usr/bin/
+    ln -sf pastebinit $INSTALL/usr/bin/paste
+
+  mkdir -p $INSTALL/usr/lib/openelec
+    cp $PKG_DIR/scripts/fs-resize $INSTALL/usr/lib/openelec
+
+  mkdir -p $INSTALL/etc
+    cp $PKG_DIR/config/profile $INSTALL/etc
+    cp $PKG_DIR/config/inputrc $INSTALL/etc
+    cp $PKG_DIR/config/httpd.conf $INSTALL/etc
+    cp $PKG_DIR/config/suspend-modules.conf $INSTALL/etc
+
+  mkdir -p $INSTALL/usr/config/sysctl.d
+    cp $PKG_DIR/config/transmission.conf $INSTALL/usr/config/sysctl.d
+
+  # /etc/fstab is needed by...
+    touch $INSTALL/etc/fstab
+
+  # /etc/machine-id, needed by systemd and dbus
+    ln -sf /run/machine-id $INSTALL/etc/machine-id
+
+  # /etc/hosts must be writeable
+    ln -sf /var/cache/hosts $INSTALL/etc/hosts
+
+  # /etc/mtab is needed by udisks etc...
+    ln -sf /proc/self/mounts $INSTALL/etc/mtab
+
+  # create /etc/hostname
+    ln -sf /proc/sys/kernel/hostname $INSTALL/etc/hostname
+
+  # systemd wants /usr/bin/mkdir
+    mkdir -p $INSTALL/usr/bin
+      ln -sf /bin/busybox $INSTALL/usr/bin/mkdir
+
+  # add webroot
+    mkdir -p $INSTALL/usr/www
+      echo "It works" > $INSTALL/usr/www/index.html
+
+    mkdir -p $INSTALL/usr/www/error
+      echo "404" > $INSTALL/usr/www/error/404.html
+}
+
+post_install() {
+  ROOT_PWD="`$ROOT/$TOOLCHAIN/bin/cryptpw -m sha512 $ROOT_PASSWORD`"
+
+  echo "chmod 4755 $INSTALL/bin/busybox" >> $FAKEROOT_SCRIPT
+  echo "chmod 000 $INSTALL/etc/shadow" >> $FAKEROOT_SCRIPT
+
+  add_user root "$ROOT_PWD" 0 0 "Root User" "/storage" "/bin/sh"
+  add_group root 0
+  add_group users 100
+
+  add_user nobody x 65534 65534 "Nobody" "/" "/bin/sh"
+  add_group nogroup 65534
+
+  enable_service debug-shell.service
+  enable_service shell.service
+  enable_service connman-ncurses.service
+  enable_service show-version.service
+  enable_service var.mount
+  enable_service var-log-debug.service
+  enable_service fs-resize.service
+
+  # cron support
+  if [ "$CRON_SUPPORT" = "yes" ] ; then
+    mkdir -p $INSTALL/usr/lib/systemd/system
+      cp $PKG_DIR/system.d.opt/cron.service $INSTALL/usr/lib/systemd/system
+      enable_service cron.service
+    mkdir -p $INSTALL/usr/share/services
+      cp -P $PKG_DIR/default.d/*.conf $INSTALL/usr/share/services
+      cp $PKG_DIR/system.d.opt/cron-defaults.service $INSTALL/usr/lib/systemd/system
+      enable_service cron-defaults.service
+  fi
+}
+
+makeinstall_init() {
+  mkdir -p $INSTALL/bin
+    ln -sf busybox $INSTALL/bin/sh
+    chmod 4755 $INSTALL/bin/busybox
+
+  mkdir -p $INSTALL/etc
+    touch $INSTALL/etc/fstab
+    ln -sf /proc/self/mounts $INSTALL/etc/mtab
+
+  if [ -f $PROJECT_DIR/$PROJECT/initramfs/platform_init ]; then
+    cp $PROJECT_DIR/$PROJECT/initramfs/platform_init $INSTALL
+    chmod 755 $INSTALL/platform_init
+  fi
+
+  cp $PKG_DIR/scripts/init $INSTALL
+  chmod 755 $INSTALL/init
+}

distributions/EMU/packages/busybox/patches/busybox-00_halt_no_init.patch

@@ -0,0 +1,12 @@
+diff -Naur busybox-1.13.2/init/halt.c busybox-1.13.2a/init/halt.c
+--- busybox-1.13.2/init/halt.c	2008-11-09 18:28:19.000000000 +0100
++++ busybox-1.13.2a/init/halt.c	2009-02-01 16:38:37.000000000 +0100
+@@ -79,7 +79,7 @@
+ 
+ 	/* Perform action. */
+ 	rc = 1;
+-	if (!(flags & 4)) { /* no -f */
++	if (ENABLE_INIT && !(flags & 4)) { /* no -f */
+ //TODO: I tend to think that signalling linuxrc is wrong
+ // pity original author didn't comment on it...
+ 		if (ENABLE_FEATURE_INITRD) {

distributions/EMU/packages/busybox/patches/busybox-01_check_cc.patch

@@ -0,0 +1,12 @@
+diff -Naur busybox-1.17.3-old/scripts/trylink busybox-1.17.3-new/scripts/trylink
+--- busybox-1.17.3-old/scripts/trylink	2010-09-16 16:05:35.000000000 -0700
++++ busybox-1.17.3-new/scripts/trylink	2010-10-10 07:38:03.000000000 -0700
+@@ -49,7 +49,7 @@
+     local tempname="/tmp/temp.$$.$RANDOM"
+     # Can use "-o /dev/null", but older gcc tend to *unlink it* on failure! :(
+     # "-xc": C language. "/dev/null" is an empty source file.
+-    if $CC $1 -shared -xc /dev/null -o "$tempname".o >/dev/null 2>&1; then
++    if $CC $CFLAGS $LDFLAGS $1 -shared -xc /dev/null -o "$tempname".o >/dev/null 2>&1; then
+ 	echo "$1";
+     else
+ 	echo "$2";

distributions/EMU/packages/busybox/patches/busybox-02_silence-crond-startup-logging.patch

@@ -0,0 +1,20 @@
+From 5f4085ddb16c206b1dc36d481c2aa6684ba392ee Mon Sep 17 00:00:00 2001
+From: Stefan Saraev <[email protected]>
+Date: Thu, 18 Jul 2013 19:26:21 +0300
+Subject: [PATCH] silence crond startup logging
+
+---
+ miscutils/crond.c |    1 -
+ 1 files changed, 0 insertions(+), 1 deletions(-)
+
+diff -Naur busybox-1.23.0/miscutils/crond.c busybox-1.23.0.patch/miscutils/crond.c
+--- busybox-1.23.0/miscutils/crond.c	2014-10-04 22:35:59.000000000 +0200
++++ busybox-1.23.0.patch/miscutils/crond.c	2014-12-26 23:07:53.386118290 +0100
+@@ -945,7 +945,6 @@
+ 
+ 	reopen_logfile_to_stderr();
+ 	xchdir(G.crontab_dir_name);
+-	log8("crond (busybox "BB_VER") started, log level %d", G.log_level);
+ 	rescan_crontab_dir();
+ 	write_pidfile(CONFIG_PID_FILE_PATH "/crond.pid");
+ 

distributions/EMU/packages/busybox/patches/busybox-03-make_unicode_printable.patch

@@ -0,0 +1,26 @@
+#
+# stolen from OpenWRT
+#
+# https://dev.openwrt.org/attachment/ticket/7993/701-make_unicode_printable.patch
+#
+
+--- a/libbb/printable_string.c	2013-01-13 20:06:04.210089516 +0800
++++ b/libbb/printable_string.c	2013-01-13 20:00:27.917211167 +0800
+@@ -31,8 +31,6 @@
+ 		}
+ 		if (c < ' ')
+ 			break;
+-		if (c >= 0x7f)
+-			break;
+ 		s++;
+ 	}
+ 
+@@ -45,7 +43,7 @@
+ 			unsigned char c = *d;
+ 			if (c == '\0')
+ 				break;
+-			if (c < ' ' || c >= 0x7f)
++			if (c < ' ')
+ 				*d = '?';
+ 			d++;
+ 		}

distributions/EMU/packages/busybox/profile.d/98-busybox.conf

@@ -0,0 +1,34 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+export HOME="/storage"
+export PATH="/bin:/sbin:/usr/bin:/usr/sbin"
+export LD_LIBRARY_PATH="/usr/lib:/lib"
+export HOSTNAME=`cat /etc/hostname`
+export PS1="\[\e[1;32m\]\h\[\e[1;32m\]:\[\e[1;34m\]\w \[\e[0m\]\\$ "
+# TODO: k0p: remove this and/or force TERM=xterm ? ping dag-
+case "$TERM" in
+  linux|nxterm|screen|xterm|xterm-color)
+    ;;
+  "")
+    export TERM="linux"
+    ;;
+  *)
+    export TERM="xterm"
+    ;;
+esac

distributions/EMU/packages/busybox/scripts/apt-get

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+message="$message\n There is no working 'apt-get'."
+message="$message\n "
+message="$message\n 'apt-get' is a command to install, update and remove software which"
+message="$message\n is stored in a non local repo. 'apt-get' does nothing then connecting to such"
+message="$message\n repo, downloads the software, unpacks the software, updates a big"
+message="$message\n local database with all filepaths and other informations about the"
+message="$message\n installed software or removes or updates installed Software."
+message="$message\n "
+message="$message\n With OpenELEC it is not possible to change the system for security and"
+message="$message\n stability reasons so even 'apt-get' would not be able to do this."
+message="$message\n We also dont have and want to maintain such a repo for various other"
+message="$message\n great reasons."
+message="$message\n "
+message="$message\n Also Ubuntu or Debian packages are often outdated and not compatible"
+message="$message\n with OpenELEC"
+message="$message\n "
+message="$message\n TIP: use XBMC's addon browser to enhance your OpenELEC system"
+
+echo -e $message
+exit 1

distributions/EMU/packages/busybox/scripts/createlog

@@ -0,0 +1,146 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+# create logfile
+
+DATE=`date -u +%Y-%m-%d-%H.%M.%S`
+BASEDIR="/tmp"
+LOGDIR="log-$DATE"
+RELEASE="`cat /etc/release`"
+GIT="`cat /etc/issue |grep git`"
+
+getlog_cmd() {
+  if which $1 >/dev/null; then
+    echo "################################################################################" >> $BASEDIR/$LOGDIR/$LOGFILE
+    echo "# ... output of $@" >> $BASEDIR/$LOGDIR/$LOGFILE
+    echo "# OpenELEC release: $RELEASE" >> $BASEDIR/$LOGDIR/$LOGFILE
+    echo "# $GIT" >> $BASEDIR/$LOGDIR/$LOGFILE
+    echo "################################################################################" >> $BASEDIR/$LOGDIR/$LOGFILE
+    $@ >> $BASEDIR/$LOGDIR/$LOGFILE 2>/dev/null
+    echo "" >> $BASEDIR/$LOGDIR/$LOGFILE
+  fi
+}
+
+rm -rf $BASEDIR/$LOGDIR
+mkdir -p $BASEDIR/$LOGDIR
+
+# kodi.log
+  LOGFILE="01_KODI.log"
+  for i in `find /storage/.kodi/temp/ -type f -name "*.log"`; do
+    getlog_cmd cat $i
+  done
+
+# System.log
+  LOGFILE="02_System.log"
+  getlog_cmd dmesg
+  getlog_cmd lsmod
+  getlog_cmd ps xa
+  for i in /storage/.config/hwdb.d/*.hwdb \
+      /storage/.config/modprobe.d/*.conf \
+      /storage/.config/modules-load.d/*.conf \
+      /storage/.config/sleep.d/*.power \
+      /storage/.config/sysctl.d/*.conf \
+      /storage/.config/udev.rules.d/.rules \
+  ; do
+    if [ -f "$i" ] ; then
+      getlog_cmd cat $i
+    fi
+  done
+  if [ -f "/storage/.config/autostart.sh" ] ; then
+    getlog_cmd cat /storage/.config/autostart.sh
+  fi
+  if [ -f "/storage/.config/shutdown.sh" ] ; then
+    getlog_cmd cat /storage/.config/shutdown.sh
+  fi
+  getlog_cmd ls -laR /storage/.config/system.d
+  # note: we dont add .mount units here as they may contan
+  # login credentials
+  for i in /storage/.config/system.d/*.service ; do
+    if [ -f "$i" -a ! -L "$i" ] ; then
+      getlog_cmd cat $i
+    fi
+  done
+
+# Hardware.log
+  LOGFILE="03_Hardware.log"
+  getlog_cmd lspci -vvvvnn
+  getlog_cmd lsusb -vvv
+  getlog_cmd lsusb -t
+  getlog_cmd cat /proc/cpuinfo
+  getlog_cmd cat /proc/meminfo
+
+# Audio.log
+  LOGFILE="04_Audio.log"
+  getlog_cmd aplay -l
+  getlog_cmd aplay -L
+  getlog_cmd amixer
+
+# Network.log
+  LOGFILE="05_Network.log"
+  getlog_cmd ifconfig -a
+  getlog_cmd netstat -rn
+  getlog_cmd netstat -nalp
+  getlog_cmd connmanctl services
+  getlog_cmd cat /etc/resolv.conf
+
+# varlog.log
+  LOGFILE="06_varlog.log"
+  for i in `find /var/log -type f`; do
+    getlog_cmd cat $i
+  done
+
+# Input.log
+  LOGFILE="07_input.log"
+  getlog_cmd cat /proc/bus/input/devices
+  # make RPi users happy
+  if [ -e /proc/acpi/wakeup ] ; then
+    getlog_cmd cat /proc/acpi/wakeup
+  fi
+
+# Filesystem.log
+  LOGFILE="08_Filesystem.log"
+  getlog_cmd cat /proc/mounts
+  getlog_cmd df -h
+  getlog_cmd blkid
+
+# Journal (current)
+  LOGFILE="09_Journal-cur.log"
+  getlog_cmd journalctl --no-pager -b -0
+
+# Journal (prev)
+  LOGFILE="10_Journal-prev.log"
+  getlog_cmd journalctl --no-pager -b -1
+
+# addons
+  LOGFILE="11_Addons.log"
+  for i in /storage/.kodi/userdata/addon_data/*/*.log \
+      /storage/.kodi/userdata/addon_data/*/log/* \
+  ; do
+    if [ -f "$i" ] ; then
+      getlog_cmd cat $i
+    fi
+  done
+
+# pack logfiles
+  mkdir -p /storage/logfiles
+  zip -jq /storage/logfiles/log-$DATE.zip $BASEDIR/$LOGDIR/*
+
+# remove logdir
+  rm -rf $BASEDIR/$LOGDIR

distributions/EMU/packages/busybox/scripts/fs-resize

@@ -0,0 +1,70 @@
+#!/bin/sh
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+if [ -e /storage/.please_resize_me ] ; then
+  # this sh** was never intended to be used
+  # on already installed and runing system
+  if [ -d /storage/.kodi -o -d /storage/.config -o -d /storage/.cache ] ; then
+    rm -f /storage/.please_resize_me
+    sync
+    echo "resizing not allowed. rebooting in 15s"
+    sleep 15
+    reboot -f
+  fi
+  # get the disk. /storage on 2nd partition
+  PART=$(grep "/storage " /proc/mounts | cut -d" " -f1 | grep '2$')
+
+  # get disk: /dev/sdx2 -> /dev/sdx, /dev/mmcblkxp2 -> /dev/mmcblkx
+  case $PART in
+    "/dev/mmcblk"*)
+      DISK=$(echo $PART | sed s/p2$//g)
+      ;;
+    *)
+      DISK=$(echo $PART | sed s/2$//g)
+      ;;
+  esac
+
+  rm -f /storage/.please_resize_me
+  sync
+
+  # just in case
+  if [ ! -z "$DISK" -a ! -z "$PART" ] ; then
+    # get storage partition start
+    PART_START=$(parted -s -m $DISK unit b print |grep -v ^/dev |grep -v BYT | grep ^2: |  cut -f2 -d ":")
+
+    # failed to get partition start offset ?
+    if [ ! -z "$PART_START" ] ; then
+      umount $PART
+      # TODO: clean up debug
+      echo "resizing /storage..."
+      echo "this may take a while. please do not reboot or turn off your computer"
+      echo "... parted -s -m $DISK rm 2"
+      parted -s -m $DISK rm 2 &>/dev/null
+      echo "... parted -s -m $DISK unit b mkpart primary $PART_START 100%"
+      parted -s -m $DISK unit b mkpart primary $PART_START 100% &>/dev/null
+      echo "... e2fsck -f -p $PART"
+      e2fsck -f -p $PART &>/dev/null
+      echo "... resize2fs $PART"
+      resize2fs $PART &>/dev/null
+      echo "...done. rebooting in 15s"
+      sleep 15
+    fi
+  fi
+fi
+reboot -f

distributions/EMU/packages/busybox/scripts/init

@@ -0,0 +1,732 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#      Copyright (C) 2010-2011 Roman Weber ([email protected])
+#      Copyright (C) 2012 Yann Cézard ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+  # create directories
+  /bin/busybox mkdir -p /dev
+  /bin/busybox mkdir -p /proc
+  /bin/busybox mkdir -p /sys
+  /bin/busybox mkdir -p /flash
+  /bin/busybox mkdir -p /sysroot
+  /bin/busybox mkdir -p /storage
+
+  # mount all needed special filesystems
+  /bin/busybox mount -t devtmpfs devtmpfs /dev
+  /bin/busybox mount -t proc proc /proc
+  /bin/busybox mount -t sysfs sysfs /sys
+
+  # set needed variables
+  MODULE_DIR=/lib/modules
+
+  UPDATE_DIR=/storage/.update
+  UPDATE_KERNEL="KERNEL"
+  UPDATE_SYSTEM="SYSTEM"
+  IMAGE_KERNEL="KERNEL"
+  IMAGE_SYSTEM="SYSTEM"
+
+  BOOT_STEP="start"
+  MD5_FAILED="0"
+  MD5_NOCHECK="0"
+  SIZE_FAILED="0"
+  RUN_FSCK="yes"
+  RUN_FSCK_DISKS=""
+
+  NBD_DEVS="0"
+  FLASH_FREE_MIN="5"
+
+  INSTALLED_MEMORY=`cat /proc/meminfo | grep 'MemTotal:' | awk '{print $2}'`
+  SYSTEM_TORAM_LIMIT=1024000
+
+  # hide kernel log messages on console
+  echo '1 4 1 7' > /proc/sys/kernel/printk
+
+  # run platform_init script if exists
+  if [ -f "./platform_init" ]; then
+    ./platform_init
+  fi
+
+  # clear screen and hide cursor
+  clear
+  if [ -f /sys/devices/virtual/graphics/fbcon/cursor_blink ] ; then
+    echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink
+  fi
+
+  # parse command line arguments
+  for arg in $(cat /proc/cmdline); do
+    case $arg in
+      BOOT_IMAGE=*)
+        IMAGE_KERNEL="${arg#*=}"
+        ;;
+      SYSTEM_IMAGE=*)
+        IMAGE_SYSTEM="${arg#*=}"
+        ;;
+      boot=*)
+        boot="${arg#*=}"
+        case $boot in
+          ISCSI=*|NBD=*|NFS=*)
+            UPDATE_DISABLED=yes
+            FLASH_NETBOOT=yes
+            ;;
+          /dev/*|LABEL=*|UUID=*)
+            RUN_FSCK_DISKS="$RUN_FSCK_DISKS $boot"
+            ;;
+        esac
+        ;;
+      disk=*)
+        disk="${arg#*=}"
+        case $disk in
+          ISCSI=*|NBD=*|NFS=*)
+            STORAGE_NETBOOT=yes
+            ;;
+          /dev/*|LABEL=*|UUID=*)
+            RUN_FSCK_DISKS="$RUN_FSCK_DISKS $disk"
+            ;;
+        esac
+        ;;
+      wol_mac=*)
+        wol_mac="${arg#*=}"
+        ;;
+      wol_wait=*)
+        wol_wait="${arg#*=}"
+        ;;
+      textmode)
+        INIT_UNIT="--unit=textmode.target"
+        ;;
+      installer)
+        INIT_UNIT="--unit=installer.target"
+        ;;
+      debugging)
+        DEBUG=yes
+        ;;
+      progress)
+        PROGRESS=yes
+        INIT_ARGS="$INIT_ARGS --show-status=1"
+        ;;
+      nofsck)
+        RUN_FSCK=no
+        ;;
+      nosplash)
+        SPLASH=no
+        ;;
+      noram)
+        SYSTEM_TORAM=no
+        ;;
+      overlay)
+        OVERLAY=yes
+        ;;
+      break=*)
+        BREAK="${arg#*=}"
+        ;;
+    esac
+  done
+
+  if test "$DEBUG" = "yes"; then
+    exec 3>&1
+  else
+    exec 3>/dev/null
+  fi
+  SILENT_OUT=3
+
+  progress() {
+    if test "$PROGRESS" = "yes"; then
+      echo "### $1 ###"
+    fi
+  }
+
+  debug_shell() {
+    echo "### Starting debugging shell... type  exit  to quit ###"
+
+    # show cursor
+    echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink
+
+    sh </dev/tty1 >/dev/tty1 2>&1
+  }
+
+  error() {
+    # Display fatal error message
+    # $1:action which caused error, $2:message
+    echo "*** Error in $BOOT_STEP: $1: $2 ***"
+    debug_shell
+  }
+
+  break_after() {
+    # Start debug shell after boot step $1
+    case $BREAK in
+      all|*$1*)
+        debug_shell
+        ;;
+    esac
+  }
+
+  # Mount handlers
+  # All handlers take the following parameters:
+  # $1:target, $2:mountpoint, $3:mount options, [$4:fs type]
+
+  mount_common() {
+    # Common mount handler, handles block devices and filesystem images
+    MOUNT_OPTIONS="-o $3"
+    [ -n "$4" ] && MOUNT_OPTIONS="-t $4 $MOUNT_OPTIONS"
+
+    for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do
+      ERR_ENV=1
+
+      mount $MOUNT_OPTIONS $1 $2 >&$SILENT_OUT 2>&1
+      [ "$?" -eq "0" ] && ERR_ENV=0 && break
+
+      usleep 1000000
+    done
+    [ "$ERR_ENV" -ne "0" ] && error "mount_common" "Could not mount $1"
+  }
+
+  get_iscsistart_options() {
+    # Convert kernel commandline ISCSI= options to iscsistart options
+    IFS_SAVE="$IFS"
+    IFS=,
+
+    for arg in $1; do
+      val="${arg#*=}"
+      case "$arg" in
+        iscsi_initiator=*)
+          option="-i"
+          ;;
+        iscsi_target_name=*)
+          option="-t"
+          ;;
+        iscsi_target_ip=*)
+          option="-a"
+          ;;
+        iscsi_target_port=*)
+          option="-p"
+          ;;
+        iscsi_target_group=*)
+          option="-g"
+          ;;
+        iscsi_username=*)
+          option="-u"
+          ;;
+        iscsi_password=*)
+          option="-w"
+          ;;
+        iscsi_in_username=*)
+          option="-U"
+          ;;
+        iscsi_in_password=*)
+          option="-W"
+          ;;
+      esac
+      echo "$option $val"
+    done
+
+    IFS="$IFS_SAVE"
+  }
+
+  mount_iscsi() {
+    # Mount iSCSI target
+    ISCSI_DEV="${1##*,}"
+    ISCSI_OPTIONS="${1%,*}"
+
+    if [ ! -f "/sbin/iscsistart" ]; then
+      error "iscsistart" "iSCSI support not available"
+    fi
+
+    if [ "$ISCSI_OPTIONS" = "auto" ]; then
+      progress "Network configuration based on iBFT"
+      /sbin/iscsistart -N >&$SILENT_OUT 2>&1 || \
+        error "iscsistart" "Unable to configure network"
+      progress "iSCSI auto connect based on iBFT"
+      /sbin/iscsistart -b >&$SILENT_OUT 2>&1 || \
+        error "iscsistart" "Unable to auto connect"
+    else
+      /sbin/iscsistart $(get_iscsistart_options "$ISCSI_OPTIONS") >&$SILENT_OUT 2>&1 || \
+        error "iscsistart" "Unable to connect to ISCSI target"
+    fi
+
+    mount_common "$ISCSI_DEV" "$2" "$3" "$4"
+  }
+
+  mount_nbd() {
+  # Mount NBD device
+    NBD_SERVER="${1%%:*}"
+    NBD_PORT="${1#*:}"
+    NBD_DEV="/dev/nbd$NBD_DEVS"
+
+    nbd-client $NBD_SERVER $NBD_PORT $NBD_DEV >&$SILENT_OUT 2>&1 || \
+      error "nbd-client" "Could not connect to NBD server $1"
+
+    mount_common "$NBD_DEV" "$2" "$3" "$4"
+
+    NBD_DEVS=$(( ${NBD_DEVS} + 1 ))
+  }
+
+  mount_nfs() {
+    # Mount NFS export
+    NFS_EXPORT="${1%%,*}"
+    NFS_OPTIONS="${1#*,}"
+
+    [ "$NFS_OPTIONS" = "$1" ] && NFS_OPTIONS=
+
+    mount_common "$NFS_EXPORT" "$2" "$3,nolock,soft,timeo=3,retrans=2,rsize=32768,wsize=32768,$NFS_OPTIONS" "nfs"
+  }
+
+  mount_part() {
+    # Mount a local or network filesystem
+    # $1:[TYPE=]target, $2:mountpoint, $3:mount options, [$4:fs type]
+    progress "mount filesystem $1 ..."
+
+    MOUNT_TARGET="${1#*=}"
+    case $1 in
+      LABEL=*|UUID=*|/*)
+        MOUNT_CMD="mount_common"
+        MOUNT_TARGET="$1"
+        ;;
+      ISCSI=*)
+        MOUNT_CMD="mount_iscsi"
+        ;;
+      NBD=*)
+        MOUNT_CMD="mount_nbd"
+        ;;
+      NFS=*)
+        MOUNT_CMD="mount_nfs"
+        ;;
+      *)
+        error "mount_part" "Unknown filesystem $1"
+        ;;
+    esac
+    $MOUNT_CMD "$MOUNT_TARGET" "$2" "$3" "$4"
+  }
+
+  update_file() {
+    if [ -f "$UPDATE_DIR/$2" -a -f "$3" ]; then
+      echo "updating $1..."
+      mount -o remount,rw /flash
+      mv $UPDATE_DIR/$2 $3 2>/dev/null
+      # loopback file needs writable /flash all the time
+      if [ "${disk%%=*}" != "FILE" ]; then
+        mount -o remount,ro /flash
+      fi
+      sync
+    fi
+  }
+
+  update_partition() {
+    if [ -f "$UPDATE_DIR/$2" -a -b "$3" ]; then
+      echo "updating $1..."
+      dd if="$UPDATE_DIR/$2" of="$3"
+     fi
+   }
+
+  update_bootloader() {
+    export BOOT_ROOT="/flash"
+    export SYSTEM_ROOT="/sysroot"
+
+    mount_part "/flash/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
+
+    if [ -f $SYSTEM_ROOT/usr/share/bootloader/update.sh ]; then
+      echo "updating Bootloader..."
+      sh $SYSTEM_ROOT/usr/share/bootloader/update.sh
+      sync
+    fi
+
+    umount /sysroot
+  }
+
+  load_modules() {
+    progress "Loading kernel modules"
+
+    [ ! -f "/etc/modules" ] && return
+    for module in $(cat /etc/modules); do
+      progress "Loading kernel module $module"
+      insmod "$MODULE_DIR/$module.ko" || \
+        progress "... Failed to load kernel module $module, skipping"
+    done
+  }
+
+  load_splash() {
+    if [ ! "$SPLASH" = "no" ]; then
+      progress "Loading bootsplash"
+
+      SPLASHIMAGE="/splash/splash-full.png"
+
+      # load uvesafb module if needed
+      if [ -f "$MODULE_DIR/uvesafb.ko" -a ! -e /dev/fb0 ]; then
+        progress "Loading kernel module uvesafb.ko"
+        insmod "$MODULE_DIR/uvesafb.ko" || \
+          progress "... Failed to load kernel module uvesafb, skipping"
+
+        # set framebuffer to a default resolution (1024x768-32)
+        if [ ! "$SWITCH_FRAMEBUFFER" = "no" ]; then
+          fbset -g 1024 768 1024 768 32
+          SPLASHIMAGE="/splash/splash-1024.png"
+        fi
+      fi
+
+      if [ -e /dev/fb0 ]; then
+        # load splash
+        if [ -f /flash/oemsplash.png ]; then
+          SPLASHIMAGE="/flash/oemsplash.png"
+        elif [ -f /splash/splash.conf ]; then
+          . /splash/splash.conf
+        fi
+
+        ply-image $SPLASHIMAGE > /dev/null 2>&1
+      fi
+    fi
+  }
+
+  do_reboot() {
+    echo "System reboots now..."
+
+    # syncing filesystem
+      sync
+
+    # unmount filesystems
+      if /bin/busybox mountpoint -q /flash ; then
+         /bin/busybox umount /flash
+      fi
+
+      if /bin/busybox mountpoint -q /storage ; then
+        /bin/busybox umount /storage
+      fi
+
+    usleep 2000000
+    /bin/busybox reboot
+  }
+
+  force_fsck() {
+    echo "Filesystem corruption has been detected"
+    echo "To prevent an automatic repair attempt continuing"
+    echo "press any key or power off your system within the next 120 seconds"
+    echo ""
+    read -t120 -n1
+    # The exit status is 0 if input is available
+    # The exit status is greater than 128 if the timeout is exceeded
+    if [ "$?" -ne "0" -o "$?" -gt "128" ] ; then
+      echo "repairing filesystem.."
+      echo ""
+      /sbin/fsck -T -M -y $RUN_FSCK_DISKS
+      FSCK_RET="$?"
+      if [ "$(( $FSCK_RET & 8 ))" = 8 ] ; then
+        # fubar
+        echo "Forced fsck failed. Your system is broken beyond repair"
+        echo "Please re-install OpenELEC"
+        echo ""
+        echo "Press enter to shutdown now"
+        echo ""
+        read fubar
+        poweroff
+      fi
+      do_reboot
+    else
+      echo "shutting down..."
+      sleep 5
+      sync
+      poweroff
+    fi
+  }
+
+  check_disks() {
+    if [ "$RUN_FSCK" = "yes" -a -n "$RUN_FSCK_DISKS" ]; then
+      progress "Checking disk(s): $RUN_FSCK_DISKS"
+        /sbin/fsck -T -M -p -a $RUN_FSCK_DISKS > /dev/null 2>&1
+        FSCK_RET="$?"
+
+        # FSCK_RET is the bit-wise OR of the exit codes for each filesystem that is checked.
+        if [ "$(( $FSCK_RET & 4 ))" = 4 ] ; then
+          # errors left
+          force_fsck
+        elif [ "$(( $FSCK_RET & 2 ))" = 2 ] ; then
+          # reboot needed
+          echo "filesystem repaired, reboot needed..."
+          do_reboot
+        elif [ "$(( $FSCK_RET & 1 ))" = 1 ] ; then
+          # filesystem errors corrected
+          progress "filesystem errors corrected , continuing..."
+        elif [ "$(( $FSCK_RET & 0 ))" = 0 ] ; then
+          # no errors found
+          progress "no filesystem errors found, continuing..."
+        fi
+    fi
+  }
+
+  wakeonlan() {
+    if [ "$STORAGE_NETBOOT" = "yes" ]; then
+      wol_ip=${disk%:*}
+      wol_ip=${wol_ip#*=}
+    elif [ "$FLASH_NETBOOT" = "yes" ]; then
+      wol_ip=${boot%:*}
+      wol_ip=${wol_ip#*=}
+    else
+      return 0
+    fi
+
+    if [ -n "$wol_ip" -a -n "$wol_mac" -a -n "$wol_wait" ]; then
+      progress "Sending Magic Packet (WOL) if needed"
+
+      if ! ping -q -c 2 "$wol_ip" &>/dev/null; then
+        ether-wake "$wol_mac"
+        sleep "$wol_wait"
+      fi
+    fi
+  }
+
+  mount_flash() {
+    progress "Mounting flash"
+
+    wakeonlan
+
+    mount_part "$boot" "/flash" "ro,noatime"
+  }
+
+  mount_storage() {
+    progress "Mounting storage"
+
+    wakeonlan
+
+    if [ -n "$disk" ]; then
+      if [ -n "$OVERLAY" ]; then
+        OVERLAY_DIR=`cat /sys/class/net/eth0/address | tr -d :`
+
+        mount_part "$disk" "/storage" "rw,noatime"
+        mkdir -p /storage/$OVERLAY_DIR
+        umount /storage
+
+        # split $disk into $target,$options so we can append $OVERLAY_DIR
+        options="${disk#*,}"
+        target="${disk%%,*}"
+        if [ "$options" = "$disk" ]; then
+          disk="$target/$OVERLAY_DIR"
+        else
+          disk="$target/$OVERLAY_DIR,$options"
+        fi
+      fi
+      mount_part "$disk" "/storage" "rw,noatime"
+    fi
+  }
+
+  check_update() {
+    progress "Checking for updates"
+
+    UPDATE_TAR=`ls -1 "$UPDATE_DIR"/*.tar 2>/dev/null | head -n 1`
+    if [ -f "$UPDATE_DIR/$UPDATE_KERNEL" -a -f "$UPDATE_DIR/$UPDATE_SYSTEM" -o -f "$UPDATE_TAR" ] ; then
+      if [ "$UPDATE_DISABLED" = "yes" ] ; then
+        rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
+        echo "Updating not supported on netboot. normal startup in 10s..."
+        sync
+        usleep 10000000
+        return 0
+      fi
+
+      # check for .tar
+      if [ -f "$UPDATE_TAR" ] ; then
+        echo "Found new .tar archive. extracting..."
+        mkdir -p $UPDATE_DIR/.tmp &>/dev/null
+        tar -xf "$UPDATE_TAR" -C $UPDATE_DIR/.tmp &>/dev/null
+        mv $UPDATE_DIR/.tmp/*/target/* $UPDATE_DIR &>/dev/null
+        rm -f "$UPDATE_TAR" &>/dev/null
+        rm -rf $UPDATE_DIR/.tmp &>/dev/null
+        sync
+        if [ ! -f "$UPDATE_DIR/$UPDATE_KERNEL" -o ! -f "$UPDATE_DIR/$UPDATE_SYSTEM" ] ; then
+          echo "missing ${UPDATE_KERNEL} or ${UPDATE_SYSTEM}... normal startup in 10s"
+          sync
+          usleep 10000000
+          return 0
+        fi
+      fi
+
+      if [ -f "$UPDATE_DIR/.nocheck" ] ; then
+        MD5_NOCHECK="1"
+      fi
+
+      # check md5 sums if .nocheck doesn't exist
+      if [ "$MD5_NOCHECK" -eq "0" ] ; then
+        if [ -f "$UPDATE_DIR/${UPDATE_KERNEL}.md5" -a -f "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" ] ; then
+          # *.md5 size-check
+          if [ ! -s "$UPDATE_DIR/${UPDATE_KERNEL}.md5" -o ! -s "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" ] ; then
+            echo "zero-sized .md5 file..."
+            MD5_FAILED="1"
+          else
+            sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_KERNEL}.md5"
+            sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_SYSTEM}.md5"
+
+            echo "Checking ${UPDATE_KERNEL}.md5..."
+            md5sum -c "$UPDATE_DIR/${UPDATE_KERNEL}.md5" || MD5_FAILED="1"
+
+            echo "Checking ${UPDATE_SYSTEM}.md5..."
+            md5sum -c "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" || MD5_FAILED="1"
+          fi
+        else
+          echo "missing ${UPDATE_KERNEL}.md5 or ${UPDATE_SYSTEM}.md5..."
+          MD5_FAILED="1"
+        fi
+      fi
+
+      # get sizes
+      FLASH_FREE=$(df /flash/ | awk '/[0-9]%/{print $4}')
+      FLASH_FREE=$(( $FLASH_FREE * 1024 ))
+
+      OLD_KERNEL="0"
+      if [ ! -b $IMAGE_KERNEL ]; then
+        OLD_KERNEL=$(stat -t "/flash/$IMAGE_KERNEL" | awk '{print $2}')
+      fi
+
+      OLD_SYSTEM=$(stat -t "/flash/$IMAGE_SYSTEM" | awk '{print $2}')
+      NEW_KERNEL=$(stat -t "$UPDATE_DIR/$UPDATE_KERNEL" | awk '{print $2}')
+      NEW_SYSTEM=$(stat -t "$UPDATE_DIR/$UPDATE_SYSTEM" | awk '{print $2}')
+
+      # old KERNEL+SYSTEM+free space - new KERNEL+SYSTEM must be higher then 5MB
+      # at least 5MB free after update
+
+      TMP_SIZE=$(($OLD_KERNEL+$OLD_SYSTEM+$FLASH_FREE-$NEW_KERNEL-$NEW_SYSTEM))
+      FLASH_FREE_MIN=$(($FLASH_FREE_MIN*1024*1024))
+
+      if [ $TMP_SIZE -ge $FLASH_FREE_MIN ]; then
+        echo "Checking size: OK"
+      else
+        echo "Checking size: FAILED"
+        SIZE_FAILED="1"
+      fi
+
+      # update if size check is ok
+      if [ "$SIZE_FAILED" -eq "0" ] ; then
+        # update if md5 check is ok or .nocheck exists
+        if [ "$MD5_FAILED" -eq "0" -o "$MD5_NOCHECK" -eq "1" ] ; then
+          if [ -b $IMAGE_KERNEL ]; then
+            update_partition "Kernel" "$UPDATE_KERNEL" "$IMAGE_KERNEL"
+          else
+            update_file "Kernel" "$UPDATE_KERNEL" "/flash/$IMAGE_KERNEL"
+          fi
+          update_file "System" "$UPDATE_SYSTEM" "/flash/$IMAGE_SYSTEM"
+          update_bootloader
+          rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
+          do_reboot
+        else
+          rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
+          echo "md5 check failed. normal startup in 30s..."
+          sync
+          usleep 30000000
+        fi
+      else
+        rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
+        echo "size check failed. normal startup in 30s..."
+        sync
+        usleep 30000000
+      fi
+    fi
+  }
+
+  prepare_sysroot() {
+    progress "Preparing system"
+
+    if [ "$SYSTEM_TORAM" = "no" -o "$INSTALLED_MEMORY" -lt "$SYSTEM_TORAM_LIMIT" ]; then
+      mount_part "/flash/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
+    else
+      cp /flash/$IMAGE_SYSTEM /dev/$IMAGE_SYSTEM
+      mount_part "/dev/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
+    fi
+
+    mount --move /flash /sysroot/flash
+
+    if [ -n "$disk" ]; then
+      mount --move /storage /sysroot/storage
+    fi
+
+    if [ ! -d "/sysroot/lib/modules/$(uname -r)/" -a -f "/sysroot/usr/lib/systemd/systemd" ]; then
+      echo ""
+      echo "NEVER TOUCH boot= in extlinux.conf / cmdline.txt"
+      echo "if you dont know what you are doing"
+      echo ""
+      echo "your installation is now broken"
+      echo ""
+      echo "normal boot in 60s..."
+      usleep 60000000
+    fi
+
+
+    [ -f "/sysroot/usr/lib/systemd/systemd" ] || error "final_check" "Could not find system."
+  }
+
+  if [ "${boot%%=*}" = "FILE" ]; then
+    error "check arguments" "boot argument can't be FILE type..."
+  fi
+
+  # main boot sequence
+  for BOOT_STEP in \
+      load_modules \
+      check_disks \
+      mount_flash \
+      load_splash \
+      mount_storage \
+      check_update \
+      prepare_sysroot; do
+    $BOOT_STEP
+    [ -n "$DEBUG" ] && break_after $BOOT_STEP
+  done
+
+  BOOT_STEP=final
+
+  # log if booting from usb / removable storage
+  STORAGE=$(cat /proc/mounts | grep " /sysroot/storage " | awk '{print $1}' | awk -F '/' '{print $3}')
+  FLASH=$(cat /proc/mounts | grep " /sysroot/flash " | awk '{print $1}' | awk -F '/' '{print $3}')
+  for i in $STORAGE $FLASH ; do
+    if [ -n "$i" ] ; then
+      removable="/sys/class/block/*/$i/../removable"
+      if [ -e $removable ] ; then
+        if [ "$(cat $removable 2>/dev/null)" = "1" ] ; then
+          echo "### BIG FAT WARNING" > /dev/kmsg
+          echo "### $i is removable. suspend/resume may not work" > /dev/kmsg
+        fi
+      fi
+    fi
+  done
+  # move some special filesystems
+  /bin/busybox mount --move /dev /sysroot/dev
+  /bin/busybox mount --move /proc /sysroot/proc
+  /bin/busybox mount --move /sys /sysroot/sys
+
+  # tell OE settings addon to disable updates
+  if [ "$UPDATE_DISABLED" = "yes" ] ; then
+    echo "" > /sysroot/dev/.update_disabled
+  fi
+  # swap can not be used over nfs.(see scripts/mount-swap)
+  if [ "$STORAGE_NETBOOT" = "yes" ] ; then
+    echo "" > /sysroot/dev/.storage_netboot
+  fi
+
+  if [ -f /sysroot/storage/.please_connect_me ] ; then
+    INIT_UNIT="--unit=connman-ncurses.target"
+  fi
+
+  if [ -f /sysroot/storage/.please_resize_me ] ; then
+    INIT_UNIT="--unit=fs-resize.target"
+  fi
+
+  BACKUP_FILE=`ls -1 /sysroot/storage/.restore/??????????????.tar 2>/dev/null | head -n 1`
+  if [ -f "$BACKUP_FILE" ] ; then
+    INIT_UNIT="--unit=backup-restore.target"
+  fi
+
+  if [ -f /sysroot/storage/.cache/reset_oe -o -f /sysroot/storage/.cache/reset_xbmc ] ; then
+    INIT_UNIT="--unit=factory-reset.target"
+  fi
+  # switch to new sysroot and start real init
+  exec /bin/busybox switch_root /sysroot /usr/lib/systemd/systemd $INIT_ARGS $INIT_UNIT
+
+  error "switch_root" "Error in initramfs. Could not switch to new root"

distributions/EMU/packages/busybox/scripts/lsb_release

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+# show release information
+. /etc/os-release
+echo "$PRETTY_NAME"

distributions/EMU/packages/busybox/scripts/passwd

@@ -0,0 +1,34 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+message="$message\n There is no working 'passwd'."
+message="$message\n"
+message="$message\n The 'passwd' command changes passwords for user accounts."
+message="$message\n"
+message="$message\n With OpenELEC it is not possible to change the system password"
+message="$message\n"
+message="$message\n SSH is included only as a last support resort. SSH is off by default."
+message="$message\n Most users never need SSH and need help using it so we need a default"
+message="$message\n password. If you need to keep SSH always on then this is unsupported"
+message="$message\n but can be secured with certificates."
+message="$message\n"
+message="$message\n TIP: disable password authentication in ssh and use public key authentication."
+
+echo -e $message

distributions/EMU/packages/busybox/scripts/pastebinit

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+#
+# wrapper for curl, posting to the sprunge.us pastebin
+# reads from stdin if called without an argument
+#
+
+cat "$@" | curl -F 'sprunge=<-' http://sprunge.us

distributions/EMU/packages/busybox/scripts/sudo

@@ -0,0 +1,32 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+message="$message\n There is no working 'sudo'."
+message="$message\n "
+message="$message\n On debian/ubuntu/all general purpose linux distributions 'sudo'"
+message="$message\n allows a permitted user to execute a command as the superuser"
+message="$message\n or another user, as specified by the security policy"
+message="$message\n "
+message="$message\n With OpenELEC you have root access by default, so you dont need 'sudo'"
+message="$message\n "
+
+echo -e $message
+
+exit 1

distributions/EMU/packages/busybox/sleep.d.serial/99-suspend-modules.sh

@@ -0,0 +1,97 @@
+#!/bin/sh
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+. /etc/suspend-modules.conf
+
+modunload()
+{
+    local MOD D C USED MODS I
+    local UNL="$(echo $1 |tr - _)" RET=1
+
+    while read MOD D C USED D; do
+        [ "$MOD" = "$UNL" ] || continue
+        if [ "$USED" = "-" ]; then
+            # no dependent modules, just try to remove this one.
+            _rmmod "$MOD" $C
+            RET=$?
+        else
+            # modules depend on this one.  try to remove them first.
+            MODS=",${USED%,}"
+            while [ -n "${MODS}" ]; do
+                # try to unload the last one first
+                MOD="${MODS##*,}"
+                modunload $MOD && RET=0
+                # prune the last one from the list
+                MODS="${MODS%,*}"
+            done
+            # if we unloaded at least one module, then let's
+            # try again!
+            [ $RET -eq 0 ] && modunload $MOD
+            RET=$?
+        fi
+        return $RET
+    done < /proc/modules
+    # if we came this far, there was nothing to do,
+    # the module is no longer loaded.
+    return 0
+}
+
+_rmmod()
+{
+    if modprobe -r "$1"; then
+        touch "/run/openelec/suspend/module:$1"
+        return 0
+    else
+        logger -t suspend-modules "# could not unload '$1', usage count was $2"
+        return 1
+    fi
+}
+
+resume_modules()
+{
+    for x in /run/openelec/suspend/module:* ; do
+        [ -O "${x}" ] || continue
+        modprobe "${x##*:}" &>/dev/null && \
+            logger -t resume-modules "Reloaded module ${x##*:}." || \
+            logger -t resume-modules "Could not reload module ${x##*:}."
+    done
+}
+
+suspend_modules()
+{
+    [ -z "$SUSPEND_MODULES" ] && return 0
+    # clean up
+    rm -rf /run/openelec/suspend
+    mkdir -p /run/openelec/suspend
+    for x in $SUSPEND_MODULES ; do
+        modunload $x && \
+            logger -t suspend-modules "Unloading kernel module $x: Done" || \
+            logger -t suspend-modules "Unloading kernel module $x: Failed"
+    done
+    return 0
+}
+
+case $1 in
+    pre)
+        suspend_modules
+    ;;
+    post)
+        resume_modules
+    ;;
+esac

distributions/EMU/packages/busybox/sysctl.d/99-coredump.conf

@@ -0,0 +1 @@
+kernel.core_pattern=/storage/.cache/cores/core.%E.%t.%p

distributions/EMU/packages/busybox/sysctl.d/cdrom.conf

@@ -0,0 +1,2 @@
+dev.cdrom.lock=0
+dev.cdrom.autoclose=0

distributions/EMU/packages/busybox/sysctl.d/memory.conf

@@ -0,0 +1 @@
+vm.min_free_kbytes=16384

distributions/EMU/packages/busybox/system.d.opt/cron-defaults.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=Cron defaults
+After=local-fs.target
+
+ConditionPathExists=!/storage/.cache/services/crond.conf
+ConditionPathExists=!/storage/.cache/services/crond.disabled
+
+[Service]
+Type=oneshot
+ExecStart=/bin/sh -c 'cp /usr/share/services/crond.conf /storage/.cache/services/'
+RemainAfterExit=yes

distributions/EMU/packages/busybox/system.d.opt/cron.service

@@ -0,0 +1,16 @@
+[Unit]
+Description=Cron daemon
+After=cron-defaults.service
+Requires=cron-defaults.service
+
+ConditionPathExists=/storage/.cache/services/crond.conf
+
+[Service]
+ExecStartPre=/bin/mkdir -p /storage/.cache/cron/crontabs
+ExecStart=/sbin/crond -f -S
+KillMode=process
+TimeoutStopSec=1s
+
+[Install]
+WantedBy=multi-user.target
+

distributions/EMU/packages/busybox/system.d/connman-ncurses.service

@@ -0,0 +1,22 @@
+[Unit]
+Description=Wifi Menu
+After=multi-user.target
+
+[Service]
+Environment=TTY=1
+WorkingDirectory=/storage
+ExecStart=/bin/sh -c 'clear; echo fufuu; . /etc/profile; exec /usr/bin/connman-ncurses'
+
+Restart=always
+RestartSec=0
+StandardInput=tty
+TTYPath=/dev/tty1
+TTYReset=yes
+TTYVHangup=yes
+KillMode=process
+IgnoreSIGPIPE=no
+# bash ignores SIGTERM
+KillSignal=SIGHUP
+
+[Install]
+WantedBy=connman-ncurses.target

distributions/EMU/packages/busybox/system.d/connman-ncurses.target

@@ -0,0 +1,6 @@
+[Unit]
+Description=Wifi Menu
+Requires=multi-user.target
+After=multi-user.target
+Conflicts=rescue.target
+AllowIsolate=yes

distributions/EMU/packages/busybox/system.d/debug-shell.service

@@ -0,0 +1,25 @@
+[Unit]
+Description=Debug Shell
+
+DefaultDependencies=no
+ConditionKernelCommandLine=|tty
+ConditionKernelCommandLine=|debugging
+ConditionPathExists=|/storage/.cache/debug.openelec
+
+[Service]
+Environment=TTY=3
+WorkingDirectory=/storage
+ExecStart=/bin/sh -c '. /etc/profile; exec /bin/sh'
+Restart=always
+RestartSec=0
+StandardInput=tty
+TTYPath=/dev/tty3
+TTYReset=yes
+TTYVHangup=yes
+KillMode=process
+IgnoreSIGPIPE=no
+# bash ignores SIGTERM
+KillSignal=SIGHUP
+
+[Install]
+WantedBy=sysinit.target

distributions/EMU/packages/busybox/system.d/fs-resize.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=FS Resize
+DefaultDependencies=no
+
+[Service]
+Type=idle
+ExecStart=/usr/lib/openelec/fs-resize
+StandardInput=tty-force
+StandardOutput=inherit
+StandardError=inherit

distributions/EMU/packages/busybox/system.d/fs-resize.target

@@ -0,0 +1,5 @@
+[Unit]
+Description=FS Resize target
+Requires=fs-resize.service
+After=fs-resize.service
+AllowIsolate=yes

distributions/EMU/packages/busybox/system.d/shell.service

@@ -0,0 +1,22 @@
+[Unit]
+Description=Textmode Shell
+After=multi-user.target
+
+[Service]
+Environment=TTY=1
+WorkingDirectory=/storage
+ExecStart=/bin/sh -c 'clear; lsb_release; . /etc/profile; exec /bin/sh'
+
+Restart=always
+RestartSec=0
+StandardInput=tty
+TTYPath=/dev/tty1
+TTYReset=yes
+TTYVHangup=yes
+KillMode=process
+IgnoreSIGPIPE=no
+# bash ignores SIGTERM
+KillSignal=SIGHUP
+
+[Install]
+WantedBy=textmode.target

distributions/EMU/packages/busybox/system.d/show-version.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=Show Version
+DefaultDependencies=false
+ConditionKernelCommandLine=!morequiet
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/lsb_release
+RemainAfterExit=yes
+#StandardOutput=tty
+
+[Install]
+WantedBy=basic.target

distributions/EMU/packages/busybox/system.d/textmode.target

@@ -0,0 +1,6 @@
+[Unit]
+Description=Textmode
+Requires=multi-user.target
+After=multi-user.target
+Conflicts=rescue.target
+AllowIsolate=yes

distributions/EMU/packages/busybox/system.d/var-log-debug.service

@@ -0,0 +1,18 @@
+[Unit]
+Description=Debug /var/log relink
+DefaultDependencies=false
+After=var.mount
+Before=systemd-journal-flush.service
+ConditionKernelCommandLine=!installer
+ConditionKernelCommandLine=|debugging
+ConditionPathExists=|/storage/.cache/debug.openelec
+
+[Service]
+Type=oneshot
+ExecStartPre=/bin/rm -rf /var/log
+ExecStartPre=-/bin/mkdir -p /storage/log/journal
+ExecStart=-/bin/ln -sf /storage/log /var/log
+RemainAfterExit=yes
+
+[Install]
+WantedBy=sysinit.target

distributions/EMU/packages/busybox/system.d/var.mount

@@ -0,0 +1,22 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU Lesser General Public License as published by
+#  the Free Software Foundation; either version 2.1 of the License, or
+#  (at your option) any later version.
+
+[Unit]
+Description=Variable Directory
+Documentation=man:hier(7)
+Documentation=http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
+DefaultDependencies=no
+Conflicts=umount.target
+Before=local-fs.target umount.target
+
+[Mount]
+What=tmpfs
+Where=/var
+Type=tmpfs
+
+[Install]
+WantedBy=local-fs.target

distributions/EMU/packages/busybox/tmpfiles.d/z_01_busybox.conf

@@ -0,0 +1,26 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+d    /var/lock                 0755 root root - -
+d    /var/media                0755 root root - -
+
+f    /var/run/utmp             1777 root root - -
+d    /storage/.update          0755 root root - -
+d    /storage/.cache/cores     0755 root root - -
+d    /storage/.cache/services  0755 root root - -
+d    /storage/.config          0755 root root - -

distributions/EMU/packages/connman-ncurses/package.mk

@@ -18,22 +18,31 @@
 #  http://www.gnu.org/copyleft/gpl.html
 ################################################################################
 
-PKG_NAME="bluez-tools"
-PKG_VERSION="193ad6b"
+PKG_NAME="connman-ncurses"
+PKG_VERSION="e2ad506"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPLv2"
-PKG_SITE="https://github.com/khvzak/bluez-tools"
+PKG_SITE="https://github.com/eurogiciel-oss/connman-json-client"
 PKG_URL="$LAKKA_MIRROR/$PKG_NAME-$PKG_VERSION.tar.xz"
-PKG_DEPENDS_TARGET="toolchain dbus glib dbus-glib readline"
+PKG_DEPENDS_TARGET="toolchain ncurses json-c"
 PKG_PRIORITY="optional"
 PKG_SECTION="network"
-PKG_SHORTDESC="A set of tools to manage bluetooth devices for linux"
-PKG_LONGDESC="This is a GSoC project to implement a set of new command line tools for bluez. The project is implemented in C and uses the D-Bus interface of bluez."
+PKG_SHORTDESC="A ncurses UI for connman"
+PKG_LONGDESC="A ncurses UI for connman"
 
 PKG_IS_ADDON="no"
 PKG_AUTORECONF="yes"
 
+PKG_CONFIGURE_OPTS_TARGET="--disable-optimization --enable-debug"
+
 pre_configure_target() {
-  export LDFLAGS="$LDFLAGS -lncurses"
+  if [ -f ../configure ]; then
+    sed -i "s|/usr/include/ncurses|$SYSROOT_PREFIX/usr/include/ncurses|g" ../configure
+  fi
+}
+
+makeinstall_target() {
+  mkdir -p $INSTALL/usr/bin
+    cp connman_ncurses $INSTALL/usr/bin/connman-ncurses
 }

distributions/Lakka/options

@@ -76,7 +76,7 @@
 # for a list of additinoal drivers see packages/linux-drivers
 # Space separated list is supported,
 # e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"
-  ADDITIONAL_DRIVERS="RTL8192CU RTL8192DU RTL8188EU RTL8812AU"
+  ADDITIONAL_DRIVERS="RTL8192CU RTL8192DU RTL8192EU RTL8188EU RTL8812AU"
 
 # build and install bluetooth support (yes / no)
   BLUETOOTH_SUPPORT="yes"
@@ -239,5 +239,100 @@
   ADDON_URL="$ADDON_SERVER_URL/$ADDON_PATH"
 
   LAKKA_MIRROR="http://sources.lakka.tv"
-  RA_PLAYLIST_NAMES="Atari - 2600.lpl;Atari - 5200.lpl;Atari - 7800.lpl;Atari - Jaguar.lpl;Atari - Lynx.lpl;Atari - ST.lpl;Bandai - WonderSwan Color.lpl;Bandai - WonderSwan.lpl;Coleco - ColecoVision.lpl;DOOM.lpl;FB Alpha - Arcade Games.lpl;GCE - Vectrex.lpl;Magnavox - Odyssey2.lpl;MAME.lpl;Microsoft - MSX2.lpl;Microsoft - MSX.lpl;NEC - PC Engine SuperGrafx.lpl;NEC - PC Engine - TurboGrafx 16.lpl;Nintendo - Famicom Disk System.lpl;Nintendo - Game Boy Advance (e-Cards).lpl;Nintendo - Game Boy Advance.lpl;Nintendo - Game Boy Color.lpl;Nintendo - Game Boy.lpl;Nintendo - Nintendo 64.lpl;Nintendo - Nintendo DS Decrypted.lpl;Nintendo - Nintendo DS (Download Play) (BETA).lpl;Nintendo - Nintendo DSi Decrypted.lpl;Nintendo - Nintendo DSi (DLC).lpl;Nintendo - Nintendo Entertainment System.lpl;Nintendo - Satellaview.lpl;Nintendo - Super Nintendo Entertainment System.lpl;Nintendo - Virtual Boy.lpl;Quake1.lpl;ScummVM.lpl;Sega - 32X.lpl;Sega - Game Gear.lpl;Sega - Master System - Mark III.lpl;Sega - Mega Drive - Genesis.lpl;Sega - PICO.lpl;Sega - SG-1000.lpl;Sinclair - ZX Spectrum +3.lpl;SNK - Neo Geo Pocket Color.lpl;SNK - Neo Geo Pocket.lpl;Sony - PlayStation Portable.lpl;Sony - PlayStation.lpl"
-  RA_PLAYLIST_CORES="/tmp/cores/stella_libretro.so;DETECT;/tmp/cores/prosystem_libretro.so;/tmp/cores/virtualjaguar_libretro.so;/tmp/cores/handy_libretro.so;/tmp/cores/hatari_libretro.so;/tmp/cores/mednafen_wswan_libretro.so;/tmp/cores/mednafen_wswan_libretro.so;/tmp/cores/bluemsx_libretro.so;/tmp/cores/prboom_libretro.so;/tmp/cores/fba_libretro.so;/tmp/cores/vecx_libretro.so;/tmp/cores/o2em_libretro.so;/tmp/cores/mame_libretro.so;/tmp/cores/bluemsx_libretro.so;/tmp/cores/bluemsx_libretro.so;/tmp/cores/mednafen_supergrafx_libretro.so;/tmp/cores/mednafen_pce_fast_libretro.so;/tmp/cores/nestopia_libretro.so;/tmp/cores/gpsp_libretro.so;/tmp/cores/gpsp_libretro.so;/tmp/cores/gambatte_libretro.so;/tmp/cores/gambatte_libretro.so;/tmp/cores/mupen64plus_libretro.so;/tmp/cores/desmume_libretro.so;/tmp/cores/desmume_libretro.so;/tmp/cores/desmume_libretro.so;/tmp/cores/desmume_libretro.so;/tmp/cores/nestopia_libretro.so;/tmp/cores/snes9x_next_libretro.so;/tmp/cores/snes9x_next_libretro.so;/tmp/cores/mednafen_vb_libretro.so;/tmp/cores/tyrquake_libretro.so;/tmp/cores/scummvm_libretro.so;/tmp/cores/picodrive_libretro.so;/tmp/cores/genesis_plus_gx_libretro.so;/tmp/cores/genesis_plus_gx_libretro.so;/tmp/cores/genesis_plus_gx_libretro.so;/tmp/cores/picodrive_libretro.so;/tmp/cores/genesis_plus_gx_libretro.so;/tmp/cores/fuse_libretro.so;/tmp/cores/mednafen_ngp_libretro.so;/tmp/cores/mednafen_ngp_libretro.so;/tmp/cores/ppsspp_libretro.so;/tmp/cores/pcsx_rearmed_libretro.so"
+  RA_PLAYLIST_NAMES=""\
+"Atari - 2600.lpl;"\
+"Atari - 5200.lpl;"\
+"Atari - 7800.lpl;"\
+"Atari - Jaguar.lpl;"\
+"Atari - Lynx.lpl;"\
+"Atari - ST.lpl;"\
+"Bandai - WonderSwan Color.lpl;"\
+"Bandai - WonderSwan.lpl;"\
+"Cave Story.lpl;"\
+"Coleco - ColecoVision.lpl;"\
+"DOOM.lpl;"\
+"FB Alpha - Arcade Games.lpl;"\
+"GCE - Vectrex.lpl;"\
+"Lutro.lpl;"\
+"Magnavox - Odyssey2.lpl;"\
+"MAME.lpl;"\
+"Microsoft - MSX2.lpl;"\
+"Microsoft - MSX.lpl;"\
+"NEC - PC Engine SuperGrafx.lpl;"\
+"NEC - PC Engine - TurboGrafx 16.lpl;"\
+"Nintendo - Famicom Disk System.lpl;"\
+"Nintendo - Game Boy Advance (e-Cards).lpl;"\
+"Nintendo - Game Boy Advance.lpl;"\
+"Nintendo - Game Boy Color.lpl;"\
+"Nintendo - Game Boy.lpl;"\
+"Nintendo - Nintendo 64.lpl;"\
+"Nintendo - Nintendo DS Decrypted.lpl;"\
+"Nintendo - Nintendo DS (Download Play) (BETA).lpl;"\
+"Nintendo - Nintendo DSi Decrypted.lpl;"\
+"Nintendo - Nintendo DSi (DLC).lpl;"\
+"Nintendo - Nintendo Entertainment System.lpl;"\
+"Nintendo - Satellaview.lpl;"\
+"Nintendo - Super Nintendo Entertainment System.lpl;"\
+"Nintendo - Virtual Boy.lpl;"\
+"Quake1.lpl;"\
+"ScummVM.lpl;"\
+"Sega - 32X.lpl;"\
+"Sega - Game Gear.lpl;"\
+"Sega - Master System - Mark III.lpl;"\
+"Sega - Mega Drive - Genesis.lpl;"\
+"Sega - PICO.lpl;"\
+"Sega - SG-1000.lpl;"\
+"Sinclair - ZX Spectrum +3.lpl;"\
+"SNK - Neo Geo Pocket Color.lpl;"\
+"SNK - Neo Geo Pocket.lpl;"\
+"Sony - PlayStation Portable.lpl;"\
+"Sony - PlayStation.lpl"
+
+  RA_PLAYLIST_CORES=""\
+"/tmp/cores/stella_libretro.so;"\
+"DETECT;"\
+"/tmp/cores/prosystem_libretro.so;"\
+"/tmp/cores/virtualjaguar_libretro.so;"\
+"/tmp/cores/handy_libretro.so;"\
+"/tmp/cores/hatari_libretro.so;"\
+"/tmp/cores/mednafen_wswan_libretro.so;"\
+"/tmp/cores/mednafen_wswan_libretro.so;"\
+"/tmp/cores/nxengine_libretro.so;"\
+"/tmp/cores/bluemsx_libretro.so;"\
+"/tmp/cores/prboom_libretro.so;"\
+"/tmp/cores/fba_libretro.so;"\
+"/tmp/cores/vecx_libretro.so;"\
+"/tmp/cores/lutro_libretro.so;"\
+"/tmp/cores/o2em_libretro.so;"\
+"/tmp/cores/mame_libretro.so;"\
+"/tmp/cores/bluemsx_libretro.so;"\
+"/tmp/cores/bluemsx_libretro.so;"\
+"/tmp/cores/mednafen_supergrafx_libretro.so;"\
+"/tmp/cores/mednafen_pce_fast_libretro.so;"\
+"/tmp/cores/nestopia_libretro.so;"\
+"/tmp/cores/mgba_libretro.so;"\
+"/tmp/cores/mgba_libretro.so;"\
+"/tmp/cores/gambatte_libretro.so;"\
+"/tmp/cores/gambatte_libretro.so;"\
+"/tmp/cores/mupen64plus_libretro.so;"\
+"/tmp/cores/desmume_libretro.so;"\
+"/tmp/cores/desmume_libretro.so;"\
+"/tmp/cores/desmume_libretro.so;"\
+"/tmp/cores/desmume_libretro.so;"\
+"/tmp/cores/nestopia_libretro.so;"\
+"/tmp/cores/snes9x_next_libretro.so;"\
+"/tmp/cores/snes9x_next_libretro.so;"\
+"/tmp/cores/mednafen_vb_libretro.so;"\
+"/tmp/cores/tyrquake_libretro.so;"\
+"/tmp/cores/scummvm_libretro.so;"\
+"/tmp/cores/picodrive_libretro.so;"\
+"/tmp/cores/genesis_plus_gx_libretro.so;"\
+"/tmp/cores/genesis_plus_gx_libretro.so;"\
+"/tmp/cores/genesis_plus_gx_libretro.so;"\
+"/tmp/cores/picodrive_libretro.so;"\
+"/tmp/cores/genesis_plus_gx_libretro.so;"\
+"/tmp/cores/fuse_libretro.so;"\
+"/tmp/cores/mednafen_ngp_libretro.so;"\
+"/tmp/cores/mednafen_ngp_libretro.so;"\
+"/tmp/cores/ppsspp_libretro.so;"\
+"/tmp/cores/pcsx_rearmed_libretro.so"

nightlies.sh

@@ -2,21 +2,45 @@
 
 rm -rf target/
 
-DISTRO=Lakka PROJECT=RPi ARCH=arm make image -j9
-DISTRO=Lakka PROJECT=RPi ARCH=arm make noobs -j9
-DISTRO=Lakka PROJECT=RPi2 ARCH=arm make image -j9
-DISTRO=Lakka PROJECT=RPi2 ARCH=arm make noobs -j9
-DISTRO=Lakka PROJECT=imx6 ARCH=arm make image -j9
+>&2 echo "Generic.x86_64"
 DISTRO=Lakka PROJECT=Generic ARCH=x86_64 make image -j9
+>&2 echo "Generic.i386"
 DISTRO=Lakka PROJECT=Generic ARCH=i386 make image -j9
+>&2 echo "Generic.x86_64 UEFI"
+DISTRO=Lakka PROJECT=Generic ARCH=x86_64 UEFI="yes" make image -j9
+>&2 echo "Generic.i386 UEFI"
+DISTRO=Lakka PROJECT=Generic ARCH=i386 UEFI="yes" make image -j9
+>&2 echo "RPi.arm"
+DISTRO=Lakka PROJECT=RPi ARCH=arm make image -j9
+>&2 echo "RPi.arm noobs"
+DISTRO=Lakka PROJECT=RPi ARCH=arm make noobs -j9
+>&2 echo "RPi2.arm"
+DISTRO=Lakka PROJECT=RPi2 ARCH=arm make image -j9
+>&2 echo "RPi2.arm noobs"
+DISTRO=Lakka PROJECT=RPi2 ARCH=arm make noobs -j9
+>&2 echo "imx6.cuboxi.arm"
+DISTRO=Lakka PROJECT=imx6 SYSTEM=cuboxi ARCH=arm make image -j9
+>&2 echo "imx6.udoo.arm"
+DISTRO=Lakka PROJECT=imx6 SYSTEM=udoo ARCH=arm scripts/clean retroarch
+DISTRO=Lakka PROJECT=imx6 SYSTEM=udoo ARCH=arm make image -j9
+>&2 echo "a20.arm"
 DISTRO=Lakka PROJECT=a20 ARCH=arm make image -j9
+>&2 echo "a10.arm"
 DISTRO=Lakka PROJECT=a10 ARCH=arm make image -j9
+>&2 echo "Bananapi.arm"
 DISTRO=Lakka PROJECT=Bananapi ARCH=arm make image -j9
+>&2 echo "OdroidC1.arm"
 DISTRO=Lakka PROJECT=OdroidC1 ARCH=arm make image -j9
+>&2 echo "OdroidXU3.arm"
 DISTRO=Lakka PROJECT=OdroidXU3 ARCH=arm make image -j9
+>&2 echo "WeTek_Play.arm"
 DISTRO=Lakka PROJECT=WeTek_Play ARCH=arm make image -j9
+>&2 echo "WeTek_Core.arm"
 DISTRO=Lakka PROJECT=WeTek_Core ARCH=arm make image -j9
 
+rm target/*.kernel
+rm target/*.system
+
 for f in target/*; do
   md5sum $f > $f.md5
   sha256sum $f > $f.sha256

packages/audio/alsa-lib/package.mk

@@ -18,7 +18,7 @@
 
 PKG_NAME="alsa-lib"
 PKG_VERSION="1.1.0"
-PKG_REV="1"
+PKG_REV="4"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.alsa-project.org/"

packages/audio/alsa-lib/profile.d/100-alsa.conf

@@ -0,0 +1,2 @@
+#Keep Alsa default order
+for i in 5 4 3 2 1 0; do [ -e /dev/snd/pcmC${i}D0p ] && export ALSA_CARD=$i; done

packages/devel/binutils/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="binutils"
-PKG_VERSION="2.25"
+PKG_VERSION="2.26.1"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/devel/json-c/package.mk

@@ -0,0 +1,40 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+PKG_NAME="json-c"
+PKG_VERSION="33ae9f5"
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="MIT"
+PKG_SITE="https://github.com/json-c/json-c"
+PKG_URL="$LAKKA_MIRROR/$PKG_NAME-$PKG_VERSION.tar.xz"
+PKG_DEPENDS_TARGET="toolchain"
+PKG_PRIORITY="optional"
+PKG_SECTION="devel"
+PKG_SHORTDESC="A JSON implementation in C"
+PKG_LONGDESC="JSON-C implements a reference counting object model that allows you to easily construct JSON objects in C, output them as JSON formatted strings and parse JSON formatted strings back into the C representation of JSON objects. It aims to conform to RFC 7159"
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="yes"
+
+PKG_CONFIGURE_OPTS_TARGET="ac_cv_func_realloc_0_nonnull=yes \
+                           ac_cv_func_malloc_0_nonnull=yes \
+                           --enable-static --disable-shared \
+                           --disable-oldname-compat"

packages/graphics/odroidc1-mali/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="odroidc1-mali"
-PKG_VERSION="r5p1-01rel0-armhf"
+PKG_VERSION="31d5c21"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="nonfree"
@@ -41,10 +41,10 @@ make_target() {
 
 makeinstall_target() {
   mkdir -p $SYSROOT_PREFIX/usr/lib
-    cp -PR usr/lib/* $SYSROOT_PREFIX/usr/lib
+    cp -PR fbdev/mali_libs/* $SYSROOT_PREFIX/usr/lib
   mkdir -p $SYSROOT_PREFIX/usr/include
-    cp -PR usr/include/* $SYSROOT_PREFIX/usr/include
+    cp -PR fbdev/mali_libs/* $SYSROOT_PREFIX/usr/include
   mkdir -p $INSTALL/usr/lib
-    cp -PR usr/lib/*.so* $INSTALL/usr/lib
+    cp -PR fbdev/mali_libs/*.so* $INSTALL/usr/lib
 }
 

packages/graphics/odroidxu3-mali/package.mk

@@ -19,12 +19,12 @@
 ################################################################################
 
 PKG_NAME="odroidxu3-mali"
-PKG_VERSION="r6p0-02rel0"
+PKG_VERSION="r7p0-02rel0"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="nonfree"
 PKG_SITE="http://malideveloper.arm.com/resources/drivers/arm-mali-midgard-gpu-user-space-drivers/"
-PKG_URL="http://malideveloper.arm.com/downloads/drivers/binary/r6p0-02rel0/mali-t62x_r6p0-02rel0_linux_1+fbdev.tar.gz"
+PKG_URL="http://malideveloper.arm.com/downloads/drivers/binary/r7p0-02rel0/mali-t62x_r7p0-02rel0_linux_1+fbdev.tar.gz"
 PKG_SOURCE_DIR="fbdev"
 PKG_BUILD_DEPENDS_TARGET="toolchain"
 PKG_DEPENDS_TARGET="libump odroidxu3-mali-headers"

packages/lakka/Bananapi/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-ngp beetle-sgx genesis-plus-gx mupen64plus lutro gpsp 2048 pcsx_rearmed snes9x-next vecx dinothawr prboom beetle-pce handy picodrive pocketsnes nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-wswan beetle-ngp beetle-sgx genesis-plus-gx mupen64plus lutro gpsp 2048 pcsx_rearmed snes9x-next vecx dinothawr prboom beetle-pce handy picodrive pocketsnes nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for Bananapi"

packages/lakka/Gamegirl/package.mk

@@ -0,0 +1,36 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+PKG_NAME="Gamegirl"
+PKG_VERSION=""
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="GPL"
+PKG_SITE="https://github.com/lakkatv/Lakka"
+PKG_URL=""
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em genesis-plus-gx 81 fuse-libretro gw-libretro lutro gpsp 2048 vecx dinothawr prboom beetle-wswan beetle-ngp beetle-pce beetle-sgx handy picodrive pocketsnes nxengine fceumm gambatte stella fba libretro-ffmpeg gamegirl-screen gamegirl-joypad"
+PKG_PRIORITY="optional"
+PKG_SECTION="virtual"
+PKG_SHORTDESC="Lakka metapackage for Gamegirl"
+PKG_LONGDESC=""
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+

packages/lakka/Generic/package.mk

@@ -25,7 +25,10 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch o2em puae snes9x picodrive 81 yabause hatari dosbox mame2003 gw-libretro fuse-libretro scummvm bluemsx beetle-sgx lutro 4do prosystem bsnes-mercury tyrquake 2048 virtualjaguar ppsspp beetle-vb beetle-wswan desmume beetle-ngp beetle-pcfx beetle-psx mupen64plus vecx snes9x-next dinothawr prboom beetle-pce fba handy genesis-plus-gx nxengine nestopia gambatte stella vbam libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch uzebox mgba o2em puae snes9x picodrive 81 yabause hatari dosbox mame2003 gw-libretro fuse-libretro scummvm bluemsx beetle-sgx lutro 4do prosystem bsnes-mercury tyrquake 2048 virtualjaguar ppsspp beetle-vb beetle-wswan desmume beetle-ngp beetle-pcfx beetle-psx mupen64plus vecx snes9x-next dinothawr prboom beetle-pce fba handy genesis-plus-gx nxengine nestopia gambatte stella vbam libretro-ffmpeg"
+if [ "$ARCH" == "x86_64" ]; then
+  PKG_DEPENDS_TARGET="$PKG_DEPENDS_TARGET reicast"
+fi
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for Generic"

packages/lakka/OdroidC1/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for OdroidC1"

packages/lakka/OdroidXU3/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for OdroidXU3"

packages/lakka/RPi/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em genesis-plus-gx 81 fuse-libretro gw-libretro lutro gpsp 2048 vecx dinothawr prboom beetle-ngp beetle-pce handy picodrive pocketsnes nxengine fceumm gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em genesis-plus-gx 81 fuse-libretro gw-libretro lutro gpsp 2048 vecx dinothawr prboom beetle-wswan beetle-ngp beetle-pce beetle-sgx handy picodrive pocketsnes nxengine fceumm gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for RPi"

packages/lakka/RPi2/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em ppsspp 81 fuse-libretro gw-libretro beetle-sgx beetle-ngp lutro snes9x-next genesis-plus-gx pcsx_rearmed mupen64plus gpsp 2048 vecx dinothawr prboom beetle-pce handy picodrive pocketsnes nxengine nestopia gambatte stella fba libretro-ffmpeg" 
+PKG_DEPENDS_TARGET="retroarch uzebox tyrquake scummvm dosbox mgba prosystem o2em ppsspp 81 fuse-libretro gw-libretro beetle-wswan beetle-sgx beetle-ngp lutro snes9x-next genesis-plus-gx pcsx_rearmed mupen64plus gpsp 2048 vecx dinothawr prboom beetle-pce handy picodrive pocketsnes nxengine nestopia gambatte stella fba libretro-ffmpeg" 
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for RPi 2"

packages/lakka/WandBoard/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for Wandboard"

packages/lakka/WeTek_Core/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for WeTek_Core"

packages/lakka/WeTek_Play/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for WeTek_Play"

packages/lakka/a10/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-ngp beetle-sgx genesis-plus-gx mupen64plus lutro gpsp 2048 pcsx_rearmed snes9x-next vecx dinothawr prboom beetle-pce handy picodrive pocketsnes nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-wswan beetle-ngp beetle-sgx genesis-plus-gx mupen64plus lutro gpsp 2048 pcsx_rearmed snes9x-next vecx dinothawr prboom beetle-pce handy picodrive pocketsnes nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for Cubieboard"

packages/lakka/a20/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-ngp beetle-sgx genesis-plus-gx mupen64plus lutro gpsp 2048 pcsx_rearmed snes9x-next vecx dinothawr prboom beetle-pce handy picodrive pocketsnes nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-wswan beetle-ngp beetle-sgx genesis-plus-gx mupen64plus lutro gpsp 2048 pcsx_rearmed snes9x-next vecx dinothawr prboom beetle-pce handy picodrive pocketsnes nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for Cubieboard2 and Cubietruck"

packages/lakka/imx6/package.mk

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/lakkatv/Lakka"
 PKG_URL=""
-PKG_DEPENDS_TARGET="retroarch prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
+PKG_DEPENDS_TARGET="retroarch tyrquake scummvm dosbox mgba prosystem o2em 81 fuse-libretro gw-libretro beetle-sgx genesis-plus-gx mupen64plus lutro gpsp ppsspp 2048 beetle-vb beetle-wswan beetle-ngp pcsx_rearmed vecx snes9x-next dinothawr prboom beetle-pce handy picodrive nxengine nestopia gambatte stella fba libretro-ffmpeg"
 PKG_PRIORITY="optional"
 PKG_SECTION="virtual"
 PKG_SHORTDESC="Lakka metapackage for Cuboxi and Hummingboard"

packages/lang/gcc/patches/gcc-glibc_gcc-4.9.2-r233672.patch

@@ -0,0 +1,127 @@
+Index: gcc-4.9.2/gcc/cp/Make-lang.in
+===================================================================
+--- gcc-4.9.2/gcc/cp/Make-lang.in	(revision 233574)
++++ gcc-4.9.2/gcc/cp/Make-lang.in	(working copy)
+@@ -111,7 +111,7 @@ else
+ # deleting the $(srcdir)/cp/cfns.h file.
+ $(srcdir)/cp/cfns.h:
+ endif
+-	gperf -o -C -E -k '1-6,$$' -j1 -D -N 'libc_name_p' -L ANSI-C \
++	gperf -o -C -E -k '1-6,$$' -j1 -D -N 'libc_name_p' -L C++ \
+ 		$(srcdir)/cp/cfns.gperf --output-file $(srcdir)/cp/cfns.h
+ 
+ #
+Index: gcc-4.9.2/gcc/cp/cfns.gperf
+===================================================================
+--- gcc-4.9.2/gcc/cp/cfns.gperf	(revision 233574)
++++ gcc-4.9.2/gcc/cp/cfns.gperf	(working copy)
+@@ -1,3 +1,5 @@
++%language=C++
++%define class-name libc_name
+ %{
+ /* Copyright (C) 2000-2015 Free Software Foundation, Inc.
+ 
+@@ -16,14 +18,6 @@ for more details.
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3.  If not see
+ <http://www.gnu.org/licenses/>.  */
+-#ifdef __GNUC__
+-__inline
+-#endif
+-static unsigned int hash (const char *, unsigned int);
+-#ifdef __GNUC__
+-__inline
+-#endif
+-const char * libc_name_p (const char *, unsigned int);
+ %}
+ %%
+ # The standard C library functions, for feeding to gperf; the result is used
+Index: gcc-4.9.2/gcc/cp/cfns.h
+===================================================================
+--- gcc-4.9.2/gcc/cp/cfns.h	(revision 233574)
++++ gcc-4.9.2/gcc/cp/cfns.h	(working copy)
+@@ -1,5 +1,5 @@
+-/* ANSI-C code produced by gperf version 3.0.3 */
+-/* Command-line: gperf -o -C -E -k '1-6,$' -j1 -D -N libc_name_p -L ANSI-C cfns.gperf  */
++/* C++ code produced by gperf version 3.0.4 */
++/* Command-line: gperf -o -C -E -k '1-6,$' -j1 -D -N libc_name_p -L C++ --output-file cfns.h cfns.gperf  */
+ 
+ #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
+       && ('%' == 37) && ('&' == 38) && ('\'' == 39) && ('(' == 40) \
+@@ -28,7 +28,7 @@
+ #error "gperf generated tables don't work with this execution character set. Please report a bug to <[email protected]>."
+ #endif
+ 
+-#line 1 "cfns.gperf"
++#line 3 "cfns.gperf"
+ 
+ /* Copyright (C) 2000-2015 Free Software Foundation, Inc.
+ 
+@@ -47,26 +47,19 @@ for more details.
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3.  If not see
+ <http://www.gnu.org/licenses/>.  */
+-#ifdef __GNUC__
+-__inline
+-#endif
+-static unsigned int hash (const char *, unsigned int);
+-#ifdef __GNUC__
+-__inline
+-#endif
+-const char * libc_name_p (const char *, unsigned int);
+ /* maximum key range = 391, duplicates = 0 */
+ 
+-#ifdef __GNUC__
+-__inline
+-#else
+-#ifdef __cplusplus
+-inline
+-#endif
+-#endif
+-static unsigned int
+-hash (register const char *str, register unsigned int len)
++class libc_name
+ {
++private:
++  static inline unsigned int hash (const char *str, unsigned int len);
++public:
++  static const char *libc_name_p (const char *str, unsigned int len);
++};
++
++inline unsigned int
++libc_name::hash (register const char *str, register unsigned int len)
++{
+   static const unsigned short asso_values[] =
+     {
+       400, 400, 400, 400, 400, 400, 400, 400, 400, 400,
+@@ -122,14 +115,8 @@ along with GCC; see the file COPYING3.  If not see
+   return hval + asso_values[(unsigned char)str[len - 1]];
+ }
+ 
+-#ifdef __GNUC__
+-__inline
+-#ifdef __GNUC_STDC_INLINE__
+-__attribute__ ((__gnu_inline__))
+-#endif
+-#endif
+ const char *
+-libc_name_p (register const char *str, register unsigned int len)
++libc_name::libc_name_p (register const char *str, register unsigned int len)
+ {
+   enum
+     {
+Index: gcc-4.9.2/gcc/cp/except.c
+===================================================================
+--- gcc-4.9.2/gcc/cp/except.c	(revision 233574)
++++ gcc-4.9.2/gcc/cp/except.c	(working copy)
+@@ -1030,7 +1030,8 @@ nothrow_libfn_p (const_tree fn)
+      unless the system headers are playing rename tricks, and if
+      they are, we don't want to be confused by them.  */
+   id = DECL_NAME (fn);
+-  return !!libc_name_p (IDENTIFIER_POINTER (id), IDENTIFIER_LENGTH (id));
++  return !!libc_name::libc_name_p (IDENTIFIER_POINTER (id),
++				   IDENTIFIER_LENGTH (id));
+ }
+ 
+ /* Returns nonzero if an exception of type FROM will be caught by a
+

packages/lang/llvm/package.mk

@@ -50,7 +50,8 @@ PKG_CONFIGURE_OPTS_HOST="--disable-polly \
                          --disable-debug-runtime \
                          --disable-debug-symbols \
                          --enable-keep-symbols \
-                         --enable-targets=r600"
+                         --enable-targets=r600 \
+                         --disable-bindings"
 
 PKG_CONFIGURE_OPTS_TARGET="--enable-polly \
                            --disable-libcpp \
@@ -80,7 +81,8 @@ PKG_CONFIGURE_OPTS_TARGET="--enable-polly \
                            --enable-timestamps \
                            --disable-backtraces \
                            --disable-libffi \
-                           --disable-ltdl-install"
+                           --disable-ltdl-install \
+                           --disable-bindings"
 
 if [ "$TARGET_ARCH" = i386 ]; then
   PKG_CONFIGURE_OPTS_TARGET="$PKG_CONFIGURE_OPTS_TARGET --enable-targets=x86,r600"

packages/libretro/atari800/package.mk

@@ -0,0 +1,40 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+PKG_NAME="atari800"
+PKG_VERSION="6e1883b"
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="GPL"
+PKG_SITE="https://github.com/r-type/libretro-atari800"
+PKG_URL="$LAKKA_MIRROR/$PKG_NAME-$PKG_VERSION.tar.xz"
+PKG_DEPENDS_TARGET="toolchain"
+PKG_PRIORITY="optional"
+PKG_SECTION="libretro"
+PKG_SHORTDESC="atari800 3.1.0 for libretro/libco WIP"
+PKG_LONGDESC="atari800 3.1.0 for libretro/libco WIP"
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+
+makeinstall_target() {
+  mkdir -p $INSTALL/usr/lib/libretro
+  cp atari800_libretro.so $INSTALL/usr/lib/libretro/
+}

packages/libretro/bsnes-mercury/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="bsnes-mercury"
-PKG_VERSION="ccd4994"
+PKG_VERSION="059235c"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPLv3"

packages/libretro/bsnes-mercury/patches/bsnes-mercury-0001-Apply-Brunnis-input-lag-fix.patch

@@ -0,0 +1,30 @@
+From f88e8d47bec8315dc3b0a15f73270360c55314ba Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Lars=20Kj=C3=A6rgaard?= <[email protected]>
+Date: Sun, 26 Jun 2016 16:21:18 +0200
+Subject: [PATCH] Apply Brunnis input lag fix.
+
+---
+ sfc/system/system.cpp | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/sfc/system/system.cpp b/sfc/system/system.cpp
+index 4d5db29..27ea216 100644
+--- a/sfc/system/system.cpp
++++ b/sfc/system/system.cpp
+@@ -282,7 +282,12 @@ void System::reset() {
+ 
+ void System::scanline() {
+   video.scanline();
+-  if(cpu.vcounter() == 241) scheduler.exit(Scheduler::ExitReason::FrameEvent);
++
++  const int vcounter_time_to_exit = ( ppu.overscan() == false ? 225 : 240 );
++
++  // Exit exactly at the right moment in order to minimize input latency - this cuts off 1 full frame of delay.
++  if( cpu.vcounter() == vcounter_time_to_exit )
++    scheduler.exit( Scheduler::ExitReason::FrameEvent );
+ }
+ 
+ void System::frame() {
+-- 
+2.7.4
+

packages/libretro/common-shaders/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="common-shaders"
-PKG_VERSION="f252d6a"
+PKG_VERSION="7b403c8"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/libretro/core-info/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="core-info"
-PKG_VERSION="d700af8"
+PKG_VERSION="20b3cde"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/libretro/craft/package.mk

@@ -0,0 +1,52 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+PKG_NAME="craft"
+PKG_VERSION="a1e173b"
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="MIT"
+PKG_SITE="https://github.com/libretro/Craft"
+PKG_URL="$LAKKA_MIRROR/$PKG_NAME-$PKG_VERSION.tar.xz"
+PKG_DEPENDS_TARGET="toolchain"
+PKG_PRIORITY="optional"
+PKG_SECTION="libretro"
+PKG_SHORTDESC="A simple Minecraft clone written in C using modern OpenGL (shaders)."
+PKG_LONGDESC="A simple Minecraft clone written in C using modern OpenGL (shaders)."
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+
+pre_configure_target() {
+  cd $ROOT/$PKG_BUILD
+}
+
+make_target() {
+  if [ "$OPENGLES_SUPPORT" = yes ]; then
+    make -f Makefile.libretro FORCE_GLES=1
+  else
+    make -f Makefile.libretro
+  fi
+}
+
+makeinstall_target() {
+  mkdir -p $INSTALL/usr/lib/libretro
+  cp craft_libretro.so $INSTALL/usr/lib/libretro/
+}

packages/libretro/dosbox/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="dosbox"
-PKG_VERSION="a8f9cb3"
+PKG_VERSION="2f5aa7e"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPLv2"

packages/libretro/emux-sms/package.mk

@@ -0,0 +1,44 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+PKG_NAME="emux-sms"
+PKG_VERSION="867a76f"
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="GPLv2"
+PKG_SITE="https://github.com/libretro/emux"
+PKG_URL="$LAKKA_MIRROR/$PKG_NAME-$PKG_VERSION.tar.xz"
+PKG_DEPENDS_TARGET="toolchain"
+PKG_PRIORITY="optional"
+PKG_SECTION="libretro"
+PKG_SHORTDESC="Libretro port of Emux"
+PKG_LONGDESC="Emux is a cross-platform emulator project supporting various machines with an architecture inspired by the Linux kernel."
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+
+make_target() {
+  make -C libretro -f Makefile.lakka MACHINE=sms
+}
+
+makeinstall_target() {
+  mkdir -p $INSTALL/usr/lib/libretro
+  cp libretro/emux_sms_libretro.so $INSTALL/usr/lib/libretro/emux_sms_libretro.so
+}

packages/libretro/emux-sms/patches/emux-sms-01-buildfix.patch

@@ -0,0 +1,69 @@
+diff -Naur emux.git/libretro/Makefile.lakka emux.patch/libretro/Makefile.lakka
+--- emux.git/libretro/Makefile.lakka	1970-01-01 01:00:00.000000000 +0100
++++ emux.patch/libretro/Makefile.lakka	2016-05-12 08:46:58.338888783 +0200
+@@ -0,0 +1,65 @@
++HOST_PLATFORM = linux
++
++TARGET_PLATFORM = lakka
++
++OBJEXT = .o
++SOEXT  = .so
++
++################
++# Platform setup
++
++STATIC_LINKING = 0
++platform       = unix
++PLATDEFS       = 
++PLATCFLAGS     = -fpic -fstrict-aliasing
++PLATCXXFLAGS   = -fpic -fstrict-aliasing
++PLATLDFLAGS    = -shared -lm -Wl,-version-script=$(BUILD_DIR)/link.T -Wl,-no-undefined
++PLATLDXFLAGS   = -shared -lm -Wl,-version-script=$(BUILD_DIR)/link.T -Wl,-no-undefined
++
++################
++# libretro setup
++
++RETRODEFS     = -D__LIBRETRO__
++RETROCFLAGS   =
++RETROCXXFLAGS =
++RETROLDFLAGS  =
++RETROLDXFLAGS =
++
++#################
++# Final variables
++
++DEFINES  += $(PLATDEFS) $(RETRODEFS)
++CFLAGS   += $(PLATCFLAGS) $(RETROCFLAGS) $(DEFINES) $(INCLUDES)
++CXXFLAGS += $(PLATCXXFLAGS) $(RETROCXXFLAGS) $(DEFINES) $(INCLUDES)
++LDFLAGS  += $(PLATLDFLAGS) $(RETROLDFLAGS)
++LDXFLAGS += $(PLATLDXFLAGS) $(RETROLDXFLAGS)
++
++########
++# Tuning
++
++ifneq ($(DEBUG),)
++  CFLAGS   += -O0 -g
++  CXXFLAGS += -O0 -g
++else
++  CFLAGS   += -O3 -DNDEBUG
++  CXXFLAGS += -O3 -DNDEBUG
++endif
++
++ifneq ($(LOG_PERFORMANCE),)
++  CFLAGS   += -DLOG_PERFORMANCE
++  CXXFLAGS += -DLOG_PERFORMANCE
++endif
++
++####################################
++# Variable setup for Makefile.common
++
++CORE_DIR  ?= ..
++BUILD_DIR ?= .
++INCLUDES   = 
++
++include $(BUILD_DIR)/Makefile.common
++
++###############
++# Include rules
++
++include $(BUILD_DIR)/Makefile.rules

packages/libretro/fceumm/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="fceumm"
-PKG_VERSION="479d5d8"
+PKG_VERSION="368f2e6"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPLv2"

packages/libretro/gambatte/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="gambatte"
-PKG_VERSION="9596337"
+PKG_VERSION="def1fbd"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPLv2"

packages/libretro/libretro-database/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="libretro-database"
-PKG_VERSION="074523b"
+PKG_VERSION="9dbef82"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/libretro/lutro/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="lutro"
-PKG_VERSION="9e39edf"
+PKG_VERSION="927b49a"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="MIT"
@@ -39,7 +39,7 @@ make_target() {
   if [ "$ARCH" == "x86_64" ]; then
     PTR_SIZE="-m64"
   fi  
-  make WANT_JIT=1 HOST_CC="$HOST_CC" PTR_SIZE="$PTR_SIZE" CROSS="$TARGET_PREFIX"
+  make WANT_JIT=1 HOST_CC="$HOST_CC" PTR_SIZE="$PTR_SIZE" CROSS="$TARGET_PREFIX" HAVE_COMPOSITION=1
 }
 
 makeinstall_target() {

packages/libretro/mame2003/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="mame2003"
-PKG_VERSION="4145a3b"
+PKG_VERSION="ae84f5d"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="MAME"

packages/libretro/mgba/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="mgba"
-PKG_VERSION="68c8e39"
+PKG_VERSION="608b8e7"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="MPLv2.0"
@@ -36,7 +36,11 @@ PKG_AUTORECONF="no"
 
 make_target() {
   cd $ROOT/$PKG_BUILD
-  make -f Makefile.libretro
+  if [[ "$ARCH" =~ "arm" ]]; then
+    make -f Makefile.libretro platform=unix-armv HAVE_NEON=1
+  else
+    make -f Makefile.libretro
+  fi
 }
 
 makeinstall_target() {

packages/libretro/mupen64plus/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="mupen64plus"
-PKG_VERSION="b84dc7c"
+PKG_VERSION="eb8f3d5"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPLv2"

packages/libretro/mupen64plus/patches/mupen64plus-02-disable-cc-resampler.patch

@@ -1,15 +0,0 @@
-diff -Naur mupen64plus.git/mupen64plus-core/src/plugin/audio_libretro/audio_backend_libretro.c mupen64plus.patch/mupen64plus-core/src/plugin/audio_libretro/audio_backend_libretro.c
---- mupen64plus.git/mupen64plus-core/src/plugin/audio_libretro/audio_backend_libretro.c	2015-12-23 17:17:21.886100651 +0100
-+++ mupen64plus.patch/mupen64plus-core/src/plugin/audio_libretro/audio_backend_libretro.c	2015-12-23 18:14:20.560292807 +0100
-@@ -77,7 +77,11 @@
- 
- void init_audio_libretro(unsigned max_audio_frames)
- {
-+#if defined(__ARM_NEON__)
-+   rarch_resampler_realloc(&resampler_audio_data, &resampler, "sinc", 1.0);
-+#else
-    rarch_resampler_realloc(&resampler_audio_data, &resampler, "CC", 1.0);
-+#endif
- 
-    MAX_AUDIO_FRAMES = max_audio_frames;
- 

packages/libretro/reicast/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="reicast"
-PKG_VERSION="f39f030"
+PKG_VERSION="a4b2829"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPLv2"

packages/libretro/retroarch-assets/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="retroarch-assets"
-PKG_VERSION="70b7d1e"
+PKG_VERSION="c8f7c0b"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/libretro/retroarch-joypad-autoconfig/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="retroarch-joypad-autoconfig"
-PKG_VERSION="1628dfc"
+PKG_VERSION="ec890e8"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/libretro/retroarch/package.mk

@@ -19,13 +19,13 @@
 ################################################################################
 
 PKG_NAME="retroarch"
-PKG_VERSION="6f63305"
-PKG_REV="3"
+PKG_VERSION="397f82c"
+PKG_REV="5"
 PKG_ARCH="any"
 PKG_LICENSE="GPLv3"
 PKG_SITE="https://github.com/libretro/RetroArch"
 PKG_URL="$LAKKA_MIRROR/$PKG_NAME-$PKG_VERSION.tar.xz"
-PKG_DEPENDS_TARGET="toolchain alsa-lib freetype zlib retroarch-assets core-info retroarch-joypad-autoconfig common-shaders lakka-update libretro-database ffmpeg bluez-tools"
+PKG_DEPENDS_TARGET="toolchain alsa-lib freetype zlib retroarch-assets core-info retroarch-joypad-autoconfig common-shaders lakka-update libretro-database ffmpeg connman-ncurses"
 PKG_PRIORITY="optional"
 PKG_SECTION="libretro"
 PKG_SHORTDESC="Reference frontend for the libretro API."
@@ -80,7 +80,13 @@ pre_configure_target() {
 }
 
 make_target() {
-  make V=1 HAVE_LAKKA=1 HAVE_ZARCH=0 LAKKA_PROJECT='\"$PROJECT.$ARCH\"'
+  LAKKA_PROJECT="$PROJECT"
+  if [ "$PROJECT" == "imx6" -a -n "$SYSTEM" ]; then
+    LAKKA_PROJECT="$LAKKA_PROJECT.$SYSTEM"
+  fi
+  LAKKA_PROJECT="$LAKKA_PROJECT.$ARCH"
+  echo $LAKKA_PROJECT
+  make V=1 HAVE_LAKKA=1 HAVE_ZARCH=0 LAKKA_PROJECT=\'\"$LAKKA_PROJECT\"\'
   make -C gfx/video_filters compiler=$CC extra_flags="$CFLAGS"
   make -C audio/audio_filters compiler=$CC extra_flags="$CFLAGS"
 }
@@ -101,7 +107,6 @@ makeinstall_target() {
   sed -i -e "s/# libretro_directory =/libretro_directory = \"\/tmp\/cores\"/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# libretro_info_path =/libretro_info_path = \"\/tmp\/cores\"/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# rgui_browser_directory =/rgui_browser_directory =\/storage\/roms/" $INSTALL/etc/retroarch.cfg
-  sed -i -e "s/# core_assets_directory =/core_assets_directory =\/storage\/roms/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# content_database_path =/content_database_path =\/tmp\/database\/rdb/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# playlist_directory =/playlist_directory =\/storage\/playlists/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# savefile_directory =/savefile_directory =\/storage\/savefiles/" $INSTALL/etc/retroarch.cfg
@@ -113,6 +118,7 @@ makeinstall_target() {
   sed -i -e "s/# assets_directory =/assets_directory =\/tmp\/assets/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# cheat_database_path =/cheat_database_path =\/tmp\/database\/cht/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# menu_driver = \"rgui\"/menu_driver = \"xmb\"/" $INSTALL/etc/retroarch.cfg
+  echo "core_assets_directory =/storage/roms/downloads" >> $INSTALL/etc/retroarch.cfg
   
   # Video
   sed -i -e "s/# video_smooth = true/video_smooth = false/" $INSTALL/etc/retroarch.cfg
@@ -132,15 +138,17 @@ makeinstall_target() {
   
   # Input
   sed -i -e "s/# input_driver = sdl/input_driver = udev/" $INSTALL/etc/retroarch.cfg
-  sed -i -e "s/# input_max_users =/input_max_users = 5/" $INSTALL/etc/retroarch.cfg
+  sed -i -e "s/# input_max_users = 16/input_max_users = 5/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# input_autodetect_enable = true/input_autodetect_enable = true/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# joypad_autoconfig_dir =/joypad_autoconfig_dir = \/tmp\/joypads/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# input_remapping_directory =/input_remapping_directory = \/storage\/remappings/" $INSTALL/etc/retroarch.cfg
-  sed -i -e "s/# input_menu_toggle_gamepad_combo =/input_menu_toggle_gamepad_combo = \"2\"/" $INSTALL/etc/retroarch.cfg
+  sed -i -e "s/# input_menu_toggle_gamepad_combo = 0/input_menu_toggle_gamepad_combo = 2/" $INSTALL/etc/retroarch.cfg
 
   # Menu
   sed -i -e "s/# menu_core_enable = true/menu_core_enable = false/" $INSTALL/etc/retroarch.cfg
   sed -i -e "s/# thumbnails_directory =/thumbnails_directory = \/storage\/thumbnails/" $INSTALL/etc/retroarch.cfg
+  echo "xmb_theme = 2" >> $INSTALL/etc/retroarch.cfg
+  echo "xmb_menu_color_theme = 8" >> $INSTALL/etc/retroarch.cfg
 
   # Updater
   if [ "$ARCH" == "arm" ]; then
@@ -163,3 +171,8 @@ post_install() {
   enable_service tmp-database.mount
   enable_service tmp-assets.mount
 }
+
+post_makeinstall_target() {
+  mkdir -p $INSTALL/usr/lib/retroarch
+    cp $PKG_DIR/scripts/retroarch-config $INSTALL/usr/lib/retroarch
+}

packages/libretro/retroarch/patches/retroarch-01-set-drm-master.patch

@@ -1,18 +1,18 @@
 diff -Naur retroarch.git/gfx/drivers_context/drm_ctx.c retroarch.patch/gfx/drivers_context/drm_ctx.c
---- retroarch.git/gfx/drivers_context/drm_ctx.c	2016-04-08 12:00:23.808205458 +0200
-+++ retroarch.patch/gfx/drivers_context/drm_ctx.c	2016-04-08 12:35:13.322971465 +0200
-@@ -324,7 +324,10 @@
-    drm_free();
+--- retroarch.git/gfx/drivers_context/drm_ctx.c	2016-05-26 23:11:52.632009156 +0200
++++ retroarch.patch/gfx/drivers_context/drm_ctx.c	2016-05-26 23:21:07.039178715 +0200
+@@ -327,7 +327,10 @@
  
-    if (g_drm_fd >= 0)
-+   {
-+      drmDropMaster(g_drm_fd);
-       filestream_close(drm->drm);
-+   }
+    if (drm->drm)
+       if (g_drm_fd >= 0)
++      {
++	 drmDropMaster(g_drm_fd);
+          filestream_close(drm->drm);
++      }
  
     g_gbm_surface      = NULL;
     g_gbm_dev          = NULL;
-@@ -420,6 +423,8 @@
+@@ -423,6 +426,8 @@
     drm->fb_width    = g_drm_connector->modes[0].hdisplay;
     drm->fb_height   = g_drm_connector->modes[0].vdisplay;
  

packages/libretro/retroarch/patches/retroarch-02-fixes.patch

@@ -0,0 +1,50 @@
+diff -Naur retroarch/libretro-common/queues/task_queue.c retroarch.patch/libretro-common/queues/task_queue.c
+--- retroarch/libretro-common/queues/task_queue.c	2016-07-31 00:07:35.497118479 +0200
++++ retroarch.patch/libretro-common/queues/task_queue.c	2016-08-02 22:18:01.040639520 +0200
+@@ -82,7 +82,7 @@
+       {
+          if (task->error)
+             task_queue_msg_push(1, 60, true, "%s: %s",
+-               "Task failed\n", task->title);
++               "Task failed", task->title);
+          else
+             task_queue_msg_push(1, 60, true, "100%%: %s", task->title);
+       }
+diff -Naur retroarch/menu/menu_displaylist.c retroarch.patch/menu/menu_displaylist.c
+--- retroarch/menu/menu_displaylist.c	2016-07-31 00:07:32.108998293 +0200
++++ retroarch.patch/menu/menu_displaylist.c	2016-07-31 00:59:53.660611939 +0200
+@@ -2688,6 +2688,7 @@
+             MENU_ENUM_LABEL_LOAD_STATE,
+             MENU_SETTING_ACTION_LOADSTATE, 0, 0);
+ 
++#ifndef HAVE_LAKKA
+       menu_entries_append_enum(info->list,
+             msg_hash_to_str(MENU_ENUM_LABEL_VALUE_UNDO_LOAD_STATE),
+             msg_hash_to_str(MENU_ENUM_LABEL_UNDO_LOAD_STATE),
+@@ -2699,6 +2700,7 @@
+             msg_hash_to_str(MENU_ENUM_LABEL_UNDO_SAVE_STATE),
+             MENU_ENUM_LABEL_UNDO_SAVE_STATE,
+             MENU_SETTING_ACTION_LOADSTATE, 0, 0);
++#endif
+ 
+       menu_entries_append_enum(info->list,
+             msg_hash_to_str(MENU_ENUM_LABEL_VALUE_CORE_OPTIONS),
+diff -Naur retroarch/menu/menu_setting.c retroarch.patch/menu/menu_setting.c
+--- retroarch/menu/menu_setting.c	2016-07-31 00:07:32.072997016 +0200
++++ retroarch.patch/menu/menu_setting.c	2016-08-09 14:16:29.955922130 +0200
+@@ -4288,6 +4288,7 @@
+                parent_group);
+          menu_settings_list_current_add_enum_idx(list, list_info, MENU_ENUM_LABEL_MENU_SETTINGS);
+ 
++#ifndef HAVE_LAKKA
+          CONFIG_ACTION(
+                list, list_info,
+                msg_hash_to_str(MENU_ENUM_LABEL_USER_INTERFACE_SETTINGS),
+@@ -4296,6 +4297,7 @@
+                &subgroup_info,
+                parent_group);
+          menu_settings_list_current_add_enum_idx(list, list_info, MENU_ENUM_LABEL_USER_INTERFACE_SETTINGS);
++#endif
+ 
+          CONFIG_ACTION(
+                list, list_info,

packages/libretro/retroarch/patches/retroarch-03-services.patch

@@ -0,0 +1,209 @@
+diff --git a/intl/msg_hash_us.c b/intl/msg_hash_us.c
+index fc4bdea..117d064 100644
+--- a/intl/msg_hash_us.c
++++ b/intl/msg_hash_us.c
+@@ -1350,6 +1350,8 @@ static const char *menu_hash_to_str_us_label_enum(enum msg_hash_enums msg)
+          return "deferred_updater_settings_list";
+       case MENU_ENUM_LABEL_DEFERRED_NETWORK_SETTINGS_LIST:
+          return "deferred_network_settings_list";
++      case MENU_ENUM_LABEL_DEFERRED_LAKKA_SERVICES_LIST:
++         return "deferred_lakka_services_list";
+       case MENU_ENUM_LABEL_DEFERRED_USER_SETTINGS_LIST:
+          return "deferred_user_settings_list";
+       case MENU_ENUM_LABEL_DEFERRED_DIRECTORY_SETTINGS_LIST:
+diff --git a/menu/cbs/menu_cbs_deferred_push.c b/menu/cbs/menu_cbs_deferred_push.c
+index 5eb7384..7abae3e 100644
+--- a/menu/cbs/menu_cbs_deferred_push.c
++++ b/menu/cbs/menu_cbs_deferred_push.c
+@@ -174,6 +174,11 @@ static int deferred_push_network_settings_list(menu_displaylist_info_t *info)
+    return deferred_push_dlist(info, DISPLAYLIST_NETWORK_SETTINGS_LIST);
+ }
+ 
++static int deferred_push_lakka_services_list(menu_displaylist_info_t *info)
++{
++   return deferred_push_dlist(info, DISPLAYLIST_LAKKA_SERVICES_LIST);
++}
++
+ static int deferred_push_user_settings_list(menu_displaylist_info_t *info)
+ {
+    return deferred_push_dlist(info, DISPLAYLIST_USER_SETTINGS_LIST);
+@@ -746,6 +751,12 @@ static int menu_cbs_init_bind_deferred_push_compare_label(
+       return 0;
+    }
+ 
++   if (string_is_equal(label, msg_hash_to_str(MENU_ENUM_LABEL_DEFERRED_LAKKA_SERVICES_LIST)))
++   {
++      BIND_ACTION_DEFERRED_PUSH(cbs, deferred_push_lakka_services_list);
++      return 0;
++   }
++
+    if (string_is_equal(label, msg_hash_to_str(MENU_ENUM_LABEL_DEFERRED_USER_SETTINGS_LIST)))
+    {
+       BIND_ACTION_DEFERRED_PUSH(cbs, deferred_push_user_settings_list);
+diff --git a/menu/cbs/menu_cbs_ok.c b/menu/cbs/menu_cbs_ok.c
+index 04ca710..85d27a1 100644
+--- a/menu/cbs/menu_cbs_ok.c
++++ b/menu/cbs/menu_cbs_ok.c
+@@ -696,6 +696,14 @@ int generic_action_ok_displaylist_push(const char *path,
+          info.enum_idx      = MENU_ENUM_LABEL_DEFERRED_NETWORK_SETTINGS_LIST;
+          dl_type                 = DISPLAYLIST_GENERIC;
+          break;
++      case ACTION_OK_DL_LAKKA_SERVICES_LIST:
++         info.directory_ptr = idx;
++         info.type          = type;
++         info_path          = path;
++         info_label         = msg_hash_to_str(MENU_ENUM_LABEL_DEFERRED_LAKKA_SERVICES_LIST);
++         info.enum_idx      = MENU_ENUM_LABEL_DEFERRED_LAKKA_SERVICES_LIST;
++         dl_type                 = DISPLAYLIST_GENERIC;
++         break;
+       case ACTION_OK_DL_USER_SETTINGS_LIST:
+          info.directory_ptr = idx;
+          info.type          = type;
+@@ -2660,6 +2668,13 @@ static int action_ok_network_list(const char *path,
+          entry_idx, ACTION_OK_DL_NETWORK_SETTINGS_LIST);
+ }
+ 
++static int action_ok_lakka_services(const char *path,
++      const char *label, unsigned type, size_t idx, size_t entry_idx)
++{
++   return generic_action_ok_displaylist_push(path, NULL, label, type, idx,
++         entry_idx, ACTION_OK_DL_LAKKA_SERVICES_LIST);
++}
++
+ static int action_ok_user_list(const char *path,
+       const char *label, unsigned type, size_t idx, size_t entry_idx)
+ {
+@@ -3390,6 +3405,9 @@ static int menu_cbs_init_bind_ok_compare_label(menu_file_list_cbs_t *cbs,
+          case MENU_ENUM_LABEL_NETWORK_SETTINGS:
+             BIND_ACTION_OK(cbs, action_ok_network_list);
+             break;
++         case MENU_ENUM_LABEL_LAKKA_SERVICES:
++            BIND_ACTION_OK(cbs, action_ok_lakka_services);
++            break;
+          case MENU_ENUM_LABEL_USER_SETTINGS:
+             BIND_ACTION_OK(cbs, action_ok_user_list);
+             break;
+diff --git a/menu/cbs/menu_cbs_title.c b/menu/cbs/menu_cbs_title.c
+index 5458f75..824976f 100644
+--- a/menu/cbs/menu_cbs_title.c
++++ b/menu/cbs/menu_cbs_title.c
+@@ -284,6 +284,13 @@ static int action_get_network_settings_list(const char *path, const char *label,
+    return 0;
+ }
+ 
++static int action_get_lakka_services_list(const char *path, const char *label, 
++      unsigned menu_type, char *s, size_t len)
++{
++   sanitize_to_string(s, msg_hash_to_str(MENU_ENUM_LABEL_VALUE_LAKKA_SERVICES), len);
++   return 0;
++}
++
+ static int action_get_user_settings_list(const char *path, const char *label, 
+       unsigned menu_type, char *s, size_t len)
+ {
+@@ -951,6 +958,12 @@ static int menu_cbs_init_bind_title_compare_label(menu_file_list_cbs_t *cbs,
+       return 0;
+    }
+ 
++   if (string_is_equal(label, msg_hash_to_str(MENU_ENUM_LABEL_DEFERRED_LAKKA_SERVICES_LIST)))
++   {
++      BIND_ACTION_GET_TITLE(cbs, action_get_lakka_services_list);
++      return 0;
++   }
++
+    if (string_is_equal(label, msg_hash_to_str(MENU_ENUM_LABEL_DEFERRED_USER_SETTINGS_LIST)))
+    {
+       BIND_ACTION_GET_TITLE(cbs, action_get_user_settings_list);
+diff --git a/menu/menu_cbs.h b/menu/menu_cbs.h
+index 5926acc..0a5bf8f 100644
+--- a/menu/menu_cbs.h
++++ b/menu/menu_cbs.h
+@@ -85,6 +85,7 @@ enum
+    ACTION_OK_DL_RETRO_ACHIEVEMENTS_SETTINGS_LIST,
+    ACTION_OK_DL_UPDATER_SETTINGS_LIST,
+    ACTION_OK_DL_NETWORK_SETTINGS_LIST,
++   ACTION_OK_DL_LAKKA_SERVICES_LIST,
+    ACTION_OK_DL_USER_SETTINGS_LIST,
+    ACTION_OK_DL_DIRECTORY_SETTINGS_LIST,
+    ACTION_OK_DL_PRIVACY_SETTINGS_LIST,
+diff --git a/menu/menu_displaylist.c b/menu/menu_displaylist.c
+index a3acfe8..380b3b8 100644
+--- a/menu/menu_displaylist.c
++++ b/menu/menu_displaylist.c
+@@ -3951,6 +3951,7 @@ bool menu_displaylist_ctl(enum menu_displaylist_ctl_state type, void *data)
+       case DISPLAYLIST_RETRO_ACHIEVEMENTS_SETTINGS_LIST:
+       case DISPLAYLIST_UPDATER_SETTINGS_LIST:
+       case DISPLAYLIST_NETWORK_SETTINGS_LIST:
++      case DISPLAYLIST_LAKKA_SERVICES_LIST:
+       case DISPLAYLIST_USER_SETTINGS_LIST:
+       case DISPLAYLIST_DIRECTORY_SETTINGS_LIST:
+       case DISPLAYLIST_PRIVACY_SETTINGS_LIST:
+@@ -4607,6 +4608,22 @@ bool menu_displaylist_ctl(enum menu_displaylist_ctl_state type, void *data)
+          info->need_refresh = true;
+          info->need_push    = true;
+          break;
++      case DISPLAYLIST_LAKKA_SERVICES_LIST:
++         menu_displaylist_parse_settings_enum(menu, info,
++               MENU_ENUM_LABEL_SSH_ENABLE,
++               PARSE_ONLY_BOOL, false);
++
++         menu_displaylist_parse_settings_enum(menu, info,
++               MENU_ENUM_LABEL_SAMBA_ENABLE,
++               PARSE_ONLY_BOOL, false);
++
++         menu_displaylist_parse_settings_enum(menu, info,
++               MENU_ENUM_LABEL_BLUETOOTH_ENABLE,
++               PARSE_ONLY_BOOL, false);
++
++         info->need_refresh = true;
++         info->need_push    = true;
++         break;
+       case DISPLAYLIST_USER_SETTINGS_LIST:
+          menu_displaylist_parse_settings_enum(menu, info,
+                MENU_ENUM_LABEL_ACCOUNTS_LIST,
+diff --git a/menu/menu_displaylist.h b/menu/menu_displaylist.h
+index ff5737f..51df36a 100644
+--- a/menu/menu_displaylist.h
++++ b/menu/menu_displaylist.h
+@@ -124,6 +124,7 @@ enum menu_displaylist_ctl_state
+    DISPLAYLIST_RETRO_ACHIEVEMENTS_SETTINGS_LIST,
+    DISPLAYLIST_UPDATER_SETTINGS_LIST,
+    DISPLAYLIST_NETWORK_SETTINGS_LIST,
++   DISPLAYLIST_LAKKA_SERVICES_LIST,
+    DISPLAYLIST_USER_SETTINGS_LIST,
+    DISPLAYLIST_DIRECTORY_SETTINGS_LIST,
+    DISPLAYLIST_PRIVACY_SETTINGS_LIST,
+diff --git a/menu/menu_setting.c b/menu/menu_setting.c
+index dacc66a..0c98055 100644
+--- a/menu/menu_setting.c
++++ b/menu/menu_setting.c
+@@ -4333,6 +4333,17 @@ static bool setting_append_list(
+                parent_group);
+          menu_settings_list_current_add_enum_idx(list, list_info, MENU_ENUM_LABEL_NETWORK_SETTINGS);
+ 
++#ifdef HAVE_SYSTEMD
++         CONFIG_ACTION(
++               list, list_info,
++               msg_hash_to_str(MENU_ENUM_LABEL_LAKKA_SERVICES),
++               msg_hash_to_str(MENU_ENUM_LABEL_VALUE_LAKKA_SERVICES),
++               &group_info,
++               &subgroup_info,
++               parent_group);
++         menu_settings_list_current_add_enum_idx(list, list_info, MENU_ENUM_LABEL_LAKKA_SERVICES);
++#endif
++
+          CONFIG_ACTION(
+                list, list_info,
+                msg_hash_to_str(MENU_ENUM_LABEL_PLAYLIST_SETTINGS),
+diff --git a/msg_hash.h b/msg_hash.h
+index 218fe86..431bc8c 100644
+--- a/msg_hash.h
++++ b/msg_hash.h
+@@ -780,6 +780,7 @@ enum msg_hash_enums
+    MENU_ENUM_LABEL_DEFERRED_RETRO_ACHIEVEMENTS_SETTINGS_LIST,
+    MENU_ENUM_LABEL_DEFERRED_UPDATER_SETTINGS_LIST,
+    MENU_ENUM_LABEL_DEFERRED_NETWORK_SETTINGS_LIST,
++   MENU_ENUM_LABEL_DEFERRED_LAKKA_SERVICES_LIST,
+    MENU_ENUM_LABEL_DEFERRED_USER_SETTINGS_LIST,
+    MENU_ENUM_LABEL_DEFERRED_DIRECTORY_SETTINGS_LIST,
+    MENU_ENUM_LABEL_DEFERRED_PRIVACY_SETTINGS_LIST,

packages/libretro/retroarch/patches/retroarch-04-connect.patch

@@ -0,0 +1,143 @@
+diff -Naur retroarch.git/configuration.c retroarch.patch/configuration.c
+--- retroarch.git/configuration.c	2016-08-23 13:31:23.945845138 +0200
++++ retroarch.patch/configuration.c	2016-08-23 13:43:50.992094516 +0200
+@@ -598,6 +598,7 @@
+    settings->ssh_enable = path_file_exists(LAKKA_SSH_PATH);
+    settings->samba_enable = path_file_exists(LAKKA_SAMBA_PATH);
+    settings->bluetooth_enable = path_file_exists(LAKKA_BLUETOOTH_PATH);
++   settings->connect_enable = path_file_exists(LAKKA_CONNECT_PATH);
+ #endif
+ 
+ #ifdef HAVE_MENU
+@@ -1817,6 +1818,7 @@
+    settings->ssh_enable = path_file_exists(LAKKA_SSH_PATH);
+    settings->samba_enable = path_file_exists(LAKKA_SAMBA_PATH);
+    settings->bluetooth_enable = path_file_exists(LAKKA_BLUETOOTH_PATH);
++   settings->connect_enable = path_file_exists(LAKKA_CONNECT_PATH);
+ #endif
+ 
+ #ifdef HAVE_NETWORKGAMEPAD
+@@ -3055,6 +3057,10 @@
+       fclose(fopen(LAKKA_BLUETOOTH_PATH, "w"));
+    else
+       remove(LAKKA_BLUETOOTH_PATH);
++   if (settings->connect_enable)
++      fclose(fopen(LAKKA_CONNECT_PATH, "w"));
++   else
++      remove(LAKKA_CONNECT_PATH);
+ #endif
+ 
+    config_set_float(conf, "fastforward_ratio",
+diff -Naur retroarch.git/configuration.h retroarch.patch/configuration.h
+--- retroarch.git/configuration.h	2016-08-23 13:31:24.125851460 +0200
++++ retroarch.patch/configuration.h	2016-08-23 13:44:30.741490625 +0200
+@@ -440,6 +440,7 @@
+    bool ssh_enable;
+    bool samba_enable;
+    bool bluetooth_enable;
++   bool connect_enable;
+ #endif
+ 
+ } settings_t;
+diff -Naur retroarch.git/intl/msg_hash_us.c retroarch.patch/intl/msg_hash_us.c
+--- retroarch.git/intl/msg_hash_us.c	2016-08-23 13:31:22.105780455 +0200
++++ retroarch.patch/intl/msg_hash_us.c	2016-08-23 13:41:35.075320315 +0200
+@@ -1614,6 +1614,8 @@
+          return "samba_enable";
+       case MENU_ENUM_LABEL_BLUETOOTH_ENABLE:
+          return "bluetooth_enable";
++      case MENU_ENUM_LABEL_CONNECT_ENABLE:
++         return "connect_enable";
+       case MENU_ENUM_LABEL_NETPLAY_DELAY_FRAMES:
+          return "netplay_delay_frames";
+       case MENU_ENUM_LABEL_NETPLAY_MODE:
+@@ -2882,6 +2884,8 @@
+          return "SAMBA Enable";
+       case MENU_ENUM_LABEL_VALUE_BLUETOOTH_ENABLE:
+          return "Bluetooth Enable";
++      case MENU_ENUM_LABEL_VALUE_CONNECT_ENABLE:
++         return "Boot to Wi-Fi Menu";
+       case MENU_ENUM_LABEL_VALUE_NETPLAY_DELAY_FRAMES:
+          return "Netplay Delay Frames";
+       case MENU_ENUM_LABEL_VALUE_NETPLAY_MODE:
+diff -Naur retroarch.git/lakka.h retroarch.patch/lakka.h
+--- retroarch.git/lakka.h	2016-08-23 13:31:15.661553920 +0200
++++ retroarch.patch/lakka.h	2016-08-23 13:34:05.895537524 +0200
+@@ -20,6 +20,7 @@
+ #define LAKKA_SSH_PATH       "/storage/.cache/services/sshd.conf"
+ #define LAKKA_SAMBA_PATH     "/storage/.cache/services/samba.conf"
+ #define LAKKA_BLUETOOTH_PATH "/storage/.cache/services/bluez.conf"
++#define LAKKA_CONNECT_PATH   "/storage/.please_connect_me"
+ #define LAKKA_UPDATE_DIR     "/storage/.update/"
+ 
+ #endif
+diff -Naur retroarch.git/menu/menu_displaylist.c retroarch.patch/menu/menu_displaylist.c
+--- retroarch.git/menu/menu_displaylist.c	2016-08-23 13:31:16.121570091 +0200
++++ retroarch.patch/menu/menu_displaylist.c	2016-08-23 13:39:23.250689209 +0200
+@@ -4623,6 +4623,10 @@
+                MENU_ENUM_LABEL_BLUETOOTH_ENABLE,
+                PARSE_ONLY_BOOL, false);
+ 
++         menu_displaylist_parse_settings_enum(menu, info,
++               MENU_ENUM_LABEL_CONNECT_ENABLE,
++               PARSE_ONLY_BOOL, false);
++
+          info->need_refresh = true;
+          info->need_push    = true;
+          break;
+diff -Naur retroarch.git/menu/menu_setting.c retroarch.patch/menu/menu_setting.c
+--- retroarch.git/menu/menu_setting.c	2016-08-23 13:31:16.101569388 +0200
++++ retroarch.patch/menu/menu_setting.c	2016-08-23 13:38:46.681404387 +0200
+@@ -3661,6 +3661,16 @@
+    systemd_service_toggle(LAKKA_BLUETOOTH_PATH, (char*)"bluetooth.service",
+          enable);
+ }
++
++static void connect_enable_toggle_change_handler(void *data)
++{
++   bool enable           = false;
++   settings_t *settings  = config_get_ptr();
++   if (settings && settings->connect_enable)
++      fclose(fopen(LAKKA_CONNECT_PATH, "w"));
++   else
++      remove(LAKKA_CONNECT_PATH);
++}
+ #endif
+ 
+ enum settings_list_type
+@@ -7729,6 +7739,23 @@
+             (*list)[list_info->index - 1].change_handler = bluetooth_enable_toggle_change_handler;
+             menu_settings_list_current_add_enum_idx(list, list_info, MENU_ENUM_LABEL_BLUETOOTH_ENABLE);
+ 
++            CONFIG_BOOL(
++                  list, list_info,
++                  &settings->connect_enable,
++                  msg_hash_to_str(MENU_ENUM_LABEL_CONNECT_ENABLE),
++                  msg_hash_to_str(MENU_ENUM_LABEL_VALUE_CONNECT_ENABLE),
++                  true,
++                  msg_hash_to_str(MENU_ENUM_LABEL_VALUE_OFF),
++                  msg_hash_to_str(MENU_ENUM_LABEL_VALUE_ON),
++                  &group_info,
++                  &subgroup_info,
++                  parent_group,
++                  general_write_handler,
++                  general_read_handler,
++                  SD_FLAG_NONE);
++            (*list)[list_info->index - 1].change_handler = connect_enable_toggle_change_handler;
++            menu_settings_list_current_add_enum_idx(list, list_info, MENU_ENUM_LABEL_CONNECT_ENABLE);
++
+             END_SUB_GROUP(list, list_info, parent_group);
+             END_GROUP(list, list_info, parent_group);
+ #endif
+diff -Naur retroarch.git/msg_hash.h retroarch.patch/msg_hash.h
+--- retroarch.git/msg_hash.h	2016-08-23 13:31:23.869842459 +0200
++++ retroarch.patch/msg_hash.h	2016-08-23 13:42:08.852506833 +0200
+@@ -1034,6 +1034,8 @@
+    MENU_ENUM_LABEL_VALUE_SAMBA_ENABLE,
+    MENU_ENUM_LABEL_BLUETOOTH_ENABLE,
+    MENU_ENUM_LABEL_VALUE_BLUETOOTH_ENABLE,
++   MENU_ENUM_LABEL_CONNECT_ENABLE,
++   MENU_ENUM_LABEL_VALUE_CONNECT_ENABLE,
+    MENU_ENUM_LABEL_NETPLAY_CLIENT_SWAP_INPUT,
+    MENU_ENUM_LABEL_VALUE_NETPLAY_CLIENT_SWAP_INPUT,
+    MENU_ENUM_LABEL_NETPLAY_DELAY_FRAMES,

packages/libretro/retroarch/patches/retroarch-04-shutdown-fix.patch

@@ -0,0 +1,21 @@
+diff --git a/command.c b/command.c
+index 921d035..26e4ce0 100644
+--- a/command.c
++++ b/command.c
+@@ -2278,6 +2278,7 @@ bool command_event(enum event_command cmd, void *data)
+       case CMD_EVENT_SHUTDOWN:
+ #if defined(__linux__) && !defined(ANDROID)
+          runloop_msg_queue_push("Shutting down...", 1, 180, true);
++         command_event(CMD_EVENT_MENU_SAVE_CURRENT_CONFIG, NULL);
+          command_event(CMD_EVENT_QUIT, NULL);
+          system("shutdown -P now");
+ #endif
+@@ -2285,6 +2286,7 @@ bool command_event(enum event_command cmd, void *data)
+       case CMD_EVENT_REBOOT:
+ #if defined(__linux__) && !defined(ANDROID)
+          runloop_msg_queue_push("Rebooting...", 1, 180, true);
++         command_event(CMD_EVENT_MENU_SAVE_CURRENT_CONFIG, NULL);
+          command_event(CMD_EVENT_QUIT, NULL);
+          system("shutdown -r now");
+ #endif
+

packages/libretro/retroarch/patches/retroarch-05-hide-updater.patch

@@ -0,0 +1,17 @@
+diff -Naur retroarch.git/menu/menu_displaylist.c retroarch.patch/menu/menu_displaylist.c
+--- retroarch.git/menu/menu_displaylist.c	2016-08-27 00:44:35.533114074 +0200
++++ retroarch.patch/menu/menu_displaylist.c	2016-08-27 00:46:37.393497089 +0200
+@@ -2916,11 +2916,11 @@
+ #ifdef HAVE_NETWORKING
+ 
+ #ifdef HAVE_LAKKA
+-   menu_entries_append_enum(info->list,
++/*   menu_entries_append_enum(info->list,
+          msg_hash_to_str(MENU_ENUM_LABEL_VALUE_UPDATE_LAKKA),
+          msg_hash_to_str(MENU_ENUM_LABEL_UPDATE_LAKKA),
+          MENU_ENUM_LABEL_UPDATE_LAKKA,
+-         MENU_SETTING_ACTION, 0, 0);
++         MENU_SETTING_ACTION, 0, 0);*/
+ 
+    menu_entries_append_enum(info->list,
+          msg_hash_to_str(MENU_ENUM_LABEL_VALUE_THUMBNAILS_UPDATER_LIST),

packages/libretro/retroarch/scripts/retroarch-config

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+for i in 5 4 3 2 1 0; do [ -e /dev/snd/pcmC${i}D0p ] && export ALSA_CARD=$i; done
+
+echo "ALSA_CARD=\"$ALSA_CARD\"" > /run/openelec/retroarch.conf

packages/libretro/retroarch/system.d/retroarch.service

@@ -9,6 +9,8 @@ Environment=DISPLAY=:0.0
 Environment=SDL_MOUSE_RELATIVE=0
 Environment=FB_MULTI_BUFFER=2
 Environment=HOME=/storage
+EnvironmentFile=-/run/openelec/retroarch.conf
+ExecStartPre=-/usr/lib/retroarch/retroarch-config
 ExecStart=/usr/bin/retroarch
 # keep KillMode=process unless there is no good reason to switch to cgroup
 KillMode=process