projects/RPi/filesystem: add project based OpenSSL config file

Signed-off-by: Stephan Raue <[email protected]>

CHANGELOG

@@ -1,20 +1,5 @@
-OpenELEC (Version 2.1)
+OpenELEC (Version 3.0)
 
-Changelog OpenELEC-2.0 to OpenELEC-2.1
+for a detailed Changelog from OpenELEC-2.0 to OpenELEC-3.0 see:
+ https://github.com/OpenELEC/OpenELEC.tv/compare/2.0.0...3.0.0
 
-Added packages:
-  - add package 'ppp'
-  - add package 'pptp'
-
-Package updates:
-  - update linux to linux-3.5
-  - update dialog to dialog-1.1-20120215
-  - update connman to connman-1.4
-
-Added functions:
-  - sshd can be enabled via OpenELEC Settings addon
-  - add PPTP support
-
-Changed functions:
-
-Removed functions:

README.md

@@ -14,7 +14,7 @@ providing cutting edge hardware support to deliver a set-top box experience.
 
 **Installation**
 
-* Please read INSTALL for instructions on how to install.
+* Please read the instructions in our wiki (http://wiki.openelec.tv/index.php?title=Installation) on how to install.
 
 **Known issues**
 

config/functions

@@ -169,6 +169,11 @@ strip_linker_plugin() {
   LDFLAGS=`echo $LDFLAGS | sed -e "s|-fuse-linker-plugin||g"`
 }
 
+strip_gold() {
+  # strip out usage from GOLD linker
+  LDFLAGS=`echo $LDFLAGS | sed -e "s|-fuse-ld=gold||g"`
+}
+
 fix_module_depends() {
   # modify .modinfo section in kernel module to depends on other required modules
   local MODULE="$1"
@@ -233,7 +238,7 @@ dashes="==========================="
 show_config() {
   dashes="==========================="
   config_message="$config_message\n $dashes$dashes$dashes"
-  config_message="$config_message\n Configuration for $DISTRONAME"
+  config_message="$config_message\n Configuration for $DISTRONAME ($([ "$OFFICIAL" = "yes" ] && echo "official" || echo "unofficial"))"
   config_message="$config_message\n $dashes$dashes$dashes"
 
   # Build options
@@ -247,6 +252,7 @@ show_config() {
   config_message="$config_message\n - SIMD support:\t\t\t $SIMD_SUPPORT"
   config_message="$config_message\n - Optimizations:\t\t\t $OPTIMIZATIONS"
   config_message="$config_message\n - LTO (Link Time Optimization) support: $LTO_SUPPORT"
+  config_message="$config_message\n - GOLD (Google Linker) Support:\t $GOLD_SUPPORT"
   config_message="$config_message\n - LLVM support:\t\t\t $LLVM_SUPPORT"
 
   # config_message="$config_message\n - CFLAGS:\t $TARGET_CFLAGS"

config/optimize

@@ -29,6 +29,10 @@ if [ "$LTO_SUPPORT" = yes ];then
   LD_OPTIM="$LD_OPTIM -flto"
 fi
 
+if [ "$GOLD_SUPPORT" = yes ];then
+  LD_OPTIM="$LD_OPTIM -fuse-ld=gold"
+fi
+
 if [ "$DEBUG" = yes ]; then
   TARGET_CFLAGS="$TARGET_CFLAGS -ggdb"
   TARGET_CXXFLAGS="$TARGET_CXXFLAGS -ggdb"

packages/addons/driver/hdhomerun/source/bin/userspace-driver.sh

@@ -54,7 +54,7 @@ if [ -z "$(pidof userhdhomerun)" ]; then
     SERIALS=$(cat /var/config/hdhomerun-addon.conf | sed -n 's|^ATTACHED_TUNER_\(.*\)_\(.*\)_DVBMODE=.*|\1-\2|gp' | sort | uniq)
     . /var/config/hdhomerun-addon.conf
 
-    for SERIAL in ${SERIALS[@]}; do
+    for SERIAL in $SERIALS; do
       SERIAL_VAR=$(echo $SERIAL | sed 's|-|_|')
       DVBMODE=$(eval echo \$ATTACHED_TUNER_${SERIAL_VAR}_DVBMODE)
       FULLNAME=$(eval echo \$ATTACHED_TUNER_${SERIAL_VAR}_FULLNAME)

packages/addons/driver/sundtek-mediatv/source/bin/userspace-driver.sh

@@ -256,7 +256,7 @@ if [ -z "$(pidof mediasrv)" ]; then
     SERIALS=$(cat /var/config/sundtek-addon.conf | sed -n 's|^ATTACHED_TUNER_\(.*\)_DVBMODE=.*|\1|gp' | sort | uniq)
     . /var/config/sundtek-addon.conf
 
-    for SERIAL in ${SERIALS[@]}; do
+    for SERIAL in $SERIALS; do
       DVBMODE=$(eval echo \$ATTACHED_TUNER_${SERIAL}_DVBMODE)
       IRPROT=$(eval echo \$ATTACHED_TUNER_${SERIAL}_IRPROT)
       KEYMAP=$(eval echo \$ATTACHED_TUNER_${SERIAL}_KEYMAP)

packages/addons/networking/backup/rsync/meta

@@ -26,7 +26,7 @@ PKG_LICENSE="OSS"
 PKG_SITE="http://www.samba.org/ftp/rsync/rsync.html"
 PKG_URL="ftp://rsync.samba.org/pub/rsync/src/$PKG_NAME-$PKG_VERSION.tar.gz"
 PKG_DEPENDS=""
-PKG_BUILD_DEPENDS="toolchain $ICONV"
+PKG_BUILD_DEPENDS="toolchain $ICONV popt"
 PKG_PRIORITY="optional"
 PKG_SECTION="network/backup"
 PKG_SHORTDESC="rsync: A replacement for rcp that has many more features"

packages/addons/service/multimedia/tvheadend/changelog.txt

@@ -1,3 +1,6 @@
+3.0.7
+- update to TVHeadend 3.3.511
+
 3.0.6
 - update to TVHeadend 3.3.491
 - disable avahi support

packages/addons/service/multimedia/tvheadend/meta

@@ -19,8 +19,8 @@
 ################################################################################
 
 PKG_NAME="tvheadend"
-PKG_VERSION="3.3.491"
-PKG_REV="6"
+PKG_VERSION="3.3.511"
+PKG_REV="7"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.lonelycoder.com/hts/tvheadend_overview.html"

packages/addons/service/multimedia/tvheadend/patches/tvheadend-0001-cwc-syslog-move-some-log-messages-to-debug.patch

@@ -1,48 +0,0 @@
-From 30517cb122d0991f0ba51155c9afff6bdc2d8899 Mon Sep 17 00:00:00 2001
-From: Stefan Saraev <[email protected]>
-Date: Wed, 13 Mar 2013 21:30:55 +0200
-Subject: [PATCH] cwc: syslog: move some log messages to debug
-
----
- src/capmt.c |    4 ++--
- src/cwc.c   |    2 +-
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/src/capmt.c b/src/capmt.c
-index ac507bd..9e12e86 100644
---- a/src/capmt.c
-+++ b/src/capmt.c
-@@ -547,7 +547,7 @@ handle_ca0(capmt_t* capmt) {
- #endif
- 
-       if(ct->ct_keystate != CT_RESOLVED)
--        tvhlog(LOG_INFO, "capmt", "Obtained key for service \"%s\"",t->s_svcname);
-+        tvhlog(LOG_DEBUG, "capmt", "Obtained key for service \"%s\"",t->s_svcname);
- 
-       ct->ct_keystate = CT_RESOLVED;
-     }
-@@ -851,7 +851,7 @@ capmt_table_input(struct th_descrambler *td, struct service *t,
-           cce->cce_ecmsize = len;
- 
-           if(ct->ct_keystate != CT_RESOLVED)
--            tvhlog(LOG_INFO, "capmt",
-+            tvhlog(LOG_DEBUG, "capmt",
-               "Trying to obtain key for service \"%s\"",t->s_svcname);
- 
-           buf[9] = pmtversion;
-diff --git a/src/cwc.c b/src/cwc.c
-index ebafd4f..904213f 100644
---- a/src/cwc.c
-+++ b/src/cwc.c
-@@ -873,7 +873,7 @@ forbid:
-     }
-     
-     if(ct->cs_keystate != CS_RESOLVED)
--      tvhlog(LOG_INFO, "cwc",
-+      tvhlog(LOG_DEBUG, "cwc",
- 	     "Obtained key for service \"%s\" in %"PRId64" ms, from %s:%i",
- 	     t->s_svcname, delay, ct->cs_cwc->cwc_hostname,
- 	     ct->cs_cwc->cwc_port);
--- 
-1.7.10.4
-

packages/addons/service/multimedia/tvheadend/patches/tvheadend-0002-dvb-stop-constant-updating-of-dvb-muxc-onfig.patch

@@ -1,94 +0,0 @@
-From 07cdfdaf6af06ae08a779ccc9082a517757c6fd3 Mon Sep 17 00:00:00 2001
-From: Adam Sutton <[email protected]>
-Date: Tue, 12 Mar 2013 15:35:21 +0000
-Subject: [PATCH] Fix #1660 - dvb: stop constant updating of dvb mux
- configuration files
-
----
- src/dvb/dvb_multiplex.c |   23 ++++++++++++++---------
- 1 file changed, 14 insertions(+), 9 deletions(-)
-
-diff --git a/src/dvb/dvb_multiplex.c b/src/dvb/dvb_multiplex.c
-index ff61558..692ebf1 100644
---- a/src/dvb/dvb_multiplex.c
-+++ b/src/dvb/dvb_multiplex.c
-@@ -58,9 +58,6 @@
-   { "OK",           TDMI_FE_OK },
- };
- 
--static void tdmi_set_enable(th_dvb_mux_instance_t *tdmi, int enabled);
--
--
- /**
-  *
-  */
-@@ -856,6 +853,9 @@ int dvb_mux_str2hier(const char *str)
-   if (!networkname || !*networkname)
-     return;
- 
-+  if (!strcmp(tdmi->tdmi_network ?: "", networkname))
-+    return;
-+
-   free(tdmi->tdmi_network);
-   tdmi->tdmi_network = strdup(networkname);
-   dvb_mux_save(tdmi);
-@@ -879,8 +879,9 @@ int dvb_mux_str2hier(const char *str)
-     if (tdmi->tdmi_transport_stream_id != 0xFFFF || tsid == 0xFFFF)
-       return;
- 
--  tdmi->tdmi_transport_stream_id = tsid;
-- 
-+  if (tdmi->tdmi_transport_stream_id == tsid)
-+    return;
-+
-   dvb_mux_save(tdmi);
- 
-   m = htsmsg_create_map();
-@@ -900,6 +901,9 @@ int dvb_mux_str2hier(const char *str)
-   if (force)
-     if (tdmi->tdmi_network_id != 0 || onid == 0)
-       return;
-+  
-+  if (tdmi->tdmi_network_id == onid)
-+    return;
- 
-   tdmi->tdmi_network_id = onid;
-  
-@@ -915,13 +919,13 @@ int dvb_mux_str2hier(const char *str)
- /**
-  *
-  */
--static void
-+static int
- tdmi_set_enable(th_dvb_mux_instance_t *tdmi, int enabled)
- {
-   th_dvb_adapter_t *tda = tdmi->tdmi_adapter;
-   
-   if(tdmi->tdmi_enabled == enabled)
--    return;
-+    return 0;
- 
-   if(tdmi->tdmi_enabled) {
- 
-@@ -940,6 +944,7 @@ int dvb_mux_str2hier(const char *str)
-     mux_link_initial(tda, tdmi);
- 
-   subscription_reschedule();
-+  return 1;
- }
- 
- /**
-@@ -948,8 +953,8 @@ int dvb_mux_str2hier(const char *str)
- void
- dvb_mux_set_enable(th_dvb_mux_instance_t *tdmi, int enabled)
- {
--  tdmi_set_enable(tdmi, enabled);
--  dvb_mux_save(tdmi);
-+  if (tdmi_set_enable(tdmi, enabled))
-+    dvb_mux_save(tdmi);
- }
- 
- 
--- 
-1.7.10
-

packages/addons/service/multimedia/vdr-addon/addon

@@ -78,8 +78,6 @@ mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/bin
   cp -P $BUILD/vdr-plugin-xmltv2vdr*/dist/epgdata2xmltv/epgdata2xmltv $ADDON_BUILD/$PKG_ADDON_ID/bin
 
 mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/lib
-  cp -P $BUILD/attr-[0-9]*/libattr/.libs/*.so* $ADDON_BUILD/$PKG_ADDON_ID/lib
-  cp -P $BUILD/libcap-[0-9]*/libcap/*.so* $ADDON_BUILD/$PKG_ADDON_ID/lib
   cp -P $BUILD/cxxtools-[0-9]*/.build-target/src/.libs/*.so* $ADDON_BUILD/$PKG_ADDON_ID/lib
   cp -P $BUILD/tntnet-[0-9]*/.build-target/framework/common/.libs/*.so* $ADDON_BUILD/$PKG_ADDON_ID/lib
   cp -P $BUILD/libzip-[0-9]*/lib/.libs/libzip*.so* $ADDON_BUILD/$PKG_ADDON_ID/lib

packages/audio/alsa-lib/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="alsa-lib"
-PKG_VERSION="1.0.26"
+PKG_VERSION="1.0.27.1"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/audio/alsa-lib/patches/alsa-lib-1.0.26-automake_1.13.patch

@@ -1,12 +0,0 @@
-diff -Naur alsa-lib-1.0.26-old/configure.in alsa-lib-1.0.26-new/configure.in
---- alsa-lib-1.0.26-old/configure.in	2012-09-06 01:55:14.000000000 -0700
-+++ alsa-lib-1.0.26-new/configure.in	2012-12-29 06:07:44.000000000 -0800
-@@ -53,7 +53,7 @@
- 
- dnl Checks for header files.
- AC_HEADER_STDC
--AM_CONFIG_HEADER(include/config.h)
-+AC_CONFIG_HEADERS(include/config.h)
- 
- dnl Checks for typedefs, structures, and compiler characteristics.
- AC_C_CONST

packages/audio/alsa-lib/patches/alsa-lib-990.01-control_Simplify_usingsnd_config_get_bool.patch

@@ -1,87 +0,0 @@
-From: Takashi Iwai <tiwai <at> suse.de>
-Subject: [PATCH RFC 1/2] control: Simplify using	snd_config_get_bool()
-Newsgroups: gmane.linux.alsa.devel
-Date: 2012-10-12 15:25:23 GMT (17 weeks, 8 hours and 26 minutes ago)
-snd_config_get_bool() was improved to parse also ASCII strings now,
-so we don't have to open-code the boolean parser in
-src/control/setup.c any longer.
-
-Signed-off-by: Takashi Iwai <tiwai <at> suse.de>
----
- src/control/setup.c | 37 ++++++-------------------------------
- 1 file changed, 6 insertions(+), 31 deletions(-)
-
-diff --git a/src/control/setup.c b/src/control/setup.c
-index eecda45..bd3599d 100644
---- a/src/control/setup.c
-+++ b/src/control/setup.c
-@@ -400,7 +400,6 @@ static int add_elem(snd_sctl_t *h, snd_config_t *_conf, snd_config_t *private_da
- {
- 	snd_config_t *conf;
- 	snd_config_iterator_t i, next;
--	char *tmp;
- 	int iface = SND_CTL_ELEM_IFACE_MIXER;
- 	const char *name = NULL;
- 	long index = 0;
-@@ -464,33 +463,17 @@ static int add_elem(snd_sctl_t *h, snd_config_t *_conf, snd_config_t *private_da
- 			continue;
- 		}
- 		if (strcmp(id, "lock") == 0) {
--			if ((err = snd_config_get_ascii(n, &tmp)) < 0) {
--				SNDERR("field %s has an invalid type", id);
--				goto _err;
--			}
--			err = snd_config_get_bool_ascii(tmp);
--			if (err < 0) {
--				SNDERR("field %s is not a boolean", id);
--				free(tmp);
-+			err = snd_config_get_bool(n);
-+			if (err < 0)
- 				goto _err;
--			}
- 			lock = err;
--			free(tmp);
- 			continue;
- 		}
- 		if (strcmp(id, "preserve") == 0) {
--			if ((err = snd_config_get_ascii(n, &tmp)) < 0) {
--				SNDERR("field %s has an invalid type", id);
--				goto _err;
--			}
--			err = snd_config_get_bool_ascii(tmp);
--			if (err < 0) {
--				SNDERR("field %s is not a boolean", id);
--				free(tmp);
-+			err = snd_config_get_bool(n);
-+			if (err < 0)
- 				goto _err;
--			}
- 			preserve = err;
--			free(tmp);
- 			continue;
- 		}
- 		if (strcmp(id, "value") == 0) {
-@@ -502,18 +485,10 @@ static int add_elem(snd_sctl_t *h, snd_config_t *_conf, snd_config_t *private_da
- 			continue;
- 		}
- 		if (strcmp(id, "optional") == 0) {
--			if ((err = snd_config_get_ascii(n, &tmp)) < 0) {
--				SNDERR("field %s has an invalid type", id);
--				goto _err;
--			}
--			err = snd_config_get_bool_ascii(tmp);
--			if (err < 0) {
--				SNDERR("field %s is not a boolean", id);
--				free(tmp);
-+			err = snd_config_get_bool(n);
-+			if (err < 0)
- 				goto _err;
--			}
- 			optional = err;
--			free(tmp);
- 			continue;
- 		}
- 		SNDERR("Unknown field %s", id);
--- 
-1.7.12.2
-

packages/audio/alsa-lib/patches/alsa-lib-990.02-Add-workaround-for-conflicting-IEC958-controls-for-H.patch

@@ -1,123 +0,0 @@
-From 91e42790dd0a9489a94e3784d220d76ad2d98b36 Mon Sep 17 00:00:00 2001
-From: Takashi Iwai <[email protected]>
-Date: Sat, 16 Feb 2013 18:29:59 +0200
-Subject: [PATCH] Add workaround for conflicting IEC958 controls for HD-audio
-
-When both an SPDIF and an HDMI output are present on HD-audio, both
-try to access IEC958 controls with index=0 although one of them must
-be wrong.  For avoiding this conflict, the recent kernel code (3.9 and
-3.8 stable) moves the IEC958 controls of an SPDIF with index=16 once
-when the conflict happens.
-
-In this patch, the corresponding support is added in alsa-lib side.
-The new "skip_rest" boolean flag is added to the hooked element
-definition which indicates that the rest of element array will be
-ignored once when this element is present and evaluated.  With this
-new flag, the HD-audio config takes device=1 primarily, then take
-device=0 as fallback.
-
-Signed-off-by: Takashi Iwai <[email protected]>
----
- src/conf/cards/HDA-Intel.conf |   16 ++++++++++++++++
- src/control/setup.c           |   19 ++++++++++++++++---
- 2 files changed, 32 insertions(+), 3 deletions(-)
-
-diff --git a/src/conf/cards/HDA-Intel.conf b/src/conf/cards/HDA-Intel.conf
-index d4f2667..3957c12 100644
---- a/src/conf/cards/HDA-Intel.conf
-+++ b/src/conf/cards/HDA-Intel.conf
-@@ -113,6 +113,22 @@ HDA-Intel.pcm.iec958.0 {
- 			hook_args [
- 			{
- 				name "IEC958 Playback Default"
-+				index 16
-+				optional true
-+				lock true
-+				preserve true
-+				value [ $AES0 $AES1 $AES2 $AES3 ]
-+			}
-+			{
-+				name "IEC958 Playback Switch"
-+				index 16
-+				optional true
-+				value true
-+				# if this element is present, skip the rest
-+				skip_rest true
-+			}
-+			{
-+				name "IEC958 Playback Default"
- 				lock true
- 				preserve true
- 				value [ $AES0 $AES1 $AES2 $AES3 ]
-diff --git a/src/control/setup.c b/src/control/setup.c
-index eecda45..72facb0 100644
---- a/src/control/setup.c
-+++ b/src/control/setup.c
-@@ -396,7 +396,7 @@ static int snd_config_get_ctl_elem_value(snd_config_t *conf,
- 	return 0;
- }
- 
--static int add_elem(snd_sctl_t *h, snd_config_t *_conf, snd_config_t *private_data)
-+static int add_elem(snd_sctl_t *h, snd_config_t *_conf, snd_config_t *private_data, int *quit)
- {
- 	snd_config_t *conf;
- 	snd_config_iterator_t i, next;
-@@ -409,6 +409,7 @@ static int add_elem(snd_sctl_t *h, snd_config_t *_conf, snd_config_t *private_da
- 	int lock = 0;
- 	int preserve = 0;
- 	int optional = 0;
-+	int skip_rest = 0;
- 	snd_config_t *value = NULL, *mask = NULL;
- 	snd_sctl_elem_t *elem = NULL;
- 	int err;
-@@ -516,6 +517,13 @@ static int add_elem(snd_sctl_t *h, snd_config_t *_conf, snd_config_t *private_da
- 			free(tmp);
- 			continue;
- 		}
-+		if (strcmp(id, "skip_rest") == 0) {
-+			err = snd_config_get_bool(n);
-+			if (err < 0)
-+				goto _err;
-+			skip_rest = err;
-+			continue;
-+		}
- 		SNDERR("Unknown field %s", id);
- 		return -EINVAL;
- 	}
-@@ -564,6 +572,9 @@ static int add_elem(snd_sctl_t *h, snd_config_t *_conf, snd_config_t *private_da
- 		if (! optional)
- 			SNDERR("Cannot obtain info for CTL elem (%s,'%s',%li,%li,%li): %s", snd_ctl_elem_iface_name(iface), name, index, device, subdevice, snd_strerror(err));
- 		goto _err;
-+	} else {
-+		if (skip_rest)
-+			*quit = 1;
- 	}
- 	snd_ctl_elem_value_set_id(elem->val, elem->id);
- 	snd_ctl_elem_value_set_id(elem->old, elem->id);
-@@ -619,7 +630,7 @@ int snd_sctl_build(snd_sctl_t **sctl, snd_ctl_t *handle, snd_config_t *conf, snd
- {
- 	snd_sctl_t *h;
- 	snd_config_iterator_t i, next;
--	int err;
-+	int err, quit = 0;
- 
- 	assert(sctl);
- 	assert(handle);
-@@ -639,11 +650,13 @@ int snd_sctl_build(snd_sctl_t **sctl, snd_ctl_t *handle, snd_config_t *conf, snd
- 	INIT_LIST_HEAD(&h->elems);
- 	snd_config_for_each(i, next, conf) {
- 		snd_config_t *n = snd_config_iterator_entry(i);
--		err = add_elem(h, n, private_data);
-+		err = add_elem(h, n, private_data, &quit);
- 		if (err < 0) {
- 			free_elems(h);
- 			return err;
- 		}
-+		if (quit)
-+			break;
- 	}
- 	*sctl = h;
- 	return 0;
--- 
-1.7.10
-

packages/audio/alsa-plugins/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="alsa-plugins"
-PKG_VERSION="1.0.26"
+PKG_VERSION="1.0.27"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/audio/alsa-utils/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="alsa-utils"
-PKG_VERSION="1.0.26"
+PKG_VERSION="1.0.27.1"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/audio/alsa-utils/patches/alsa-utils-1.0.26-automake_1.13.patch

@@ -1,12 +0,0 @@
-diff -Naur alsa-utils-1.0.26-old/configure.in alsa-utils-1.0.26-new/configure.in
---- alsa-utils-1.0.26-old/configure.in	2012-09-06 01:45:44.000000000 -0700
-+++ alsa-utils-1.0.26-new/configure.in	2012-12-29 08:01:59.000000000 -0800
-@@ -290,7 +290,7 @@
-   TESTSOUND="$dir/test.wav")
- AC_SUBST(TESTSOUND)
- 
--AM_CONFIG_HEADER(include/aconfig.h)
-+AC_CONFIG_HEADERS(include/aconfig.h)
- 
- dnl Checks for typedefs, structures, and compiler characteristics.
- AC_C_CONST

packages/audio/pulseaudio/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://pulseaudio.org/"
 PKG_URL="http://freedesktop.org/software/pulseaudio/releases/$PKG_NAME-$PKG_VERSION.tar.xz"
-PKG_DEPENDS="libtool json-c alsa-lib libsndfile libsamplerate speex dbus systemd openssl libcap"
+PKG_DEPENDS="libtool json-c alsa-lib libsndfile libsamplerate speex dbus systemd openssl"
 PKG_BUILD_DEPENDS="toolchain libtool json-c alsa-lib libsndfile libsamplerate speex dbus systemd openssl libcap"
 PKG_PRIORITY="optional"
 PKG_SECTION="audio"

packages/databases/mysql/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="mysql"
-PKG_VERSION="5.1.67"
+PKG_VERSION="5.1.68"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="LGPL"

packages/databases/mysql/patches/mysql-5.1.67-automake_1.13.patch

@@ -1,12 +0,0 @@
-diff -Naur mysql-5.1.67-old/configure.in mysql-5.1.67-new/configure.in
---- mysql-5.1.67-old/configure.in	2012-12-13 02:05:51.000000000 -0800
-+++ mysql-5.1.67-new/configure.in	2012-12-30 08:39:00.000000000 -0800
-@@ -22,7 +22,7 @@
- AM_INIT_AUTOMAKE([1.9 tar-ustar])
- AC_PROG_LIBTOOL
- 
--AM_CONFIG_HEADER([include/config.h])
-+AC_CONFIG_HEADERS([include/config.h])
- 
- # Request support for automake silent-rules if available.
- # Default to verbose output. One can use the configure-time

packages/databases/sqlite/build

@@ -50,15 +50,12 @@ cd $PKG_BUILD
             --build=$HOST_NAME \
             --prefix=/usr \
             --sysconfdir=/etc \
-            --disable-static \
-            --enable-shared \
+            --enable-static \
+            --disable-shared \
             --disable-readline \
             --enable-threadsafe \
             --enable-dynamic-extensions \
             --with-gnu-ld
 
 make
-
-$STRIP .libs/sqlite3
-
 $MAKEINSTALL

packages/databases/sqlite/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="sqlite"
-PKG_VERSION="autoconf-3071600"
+PKG_VERSION="autoconf-3071700"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="PublicDomain"

packages/debug/acpica/build

@@ -30,6 +30,9 @@ cd $PKG_BUILD
 make PREFIX=/usr \
      CC="$TARGET_CC" \
      AR="$TARGET_AR" \
+     HOST=_LINUX \
+     HARDWARE_NAME=$TARGET_ARCH \
      BITS=$ACPICA_BITS \
      YACC=$ROOT/$TOOLCHAIN/bin/bison \
      CWARNINGFLAGS="-O2 $TARGET_CFLAGS"
+

packages/debug/acpica/meta

@@ -19,12 +19,13 @@
 ################################################################################
 
 PKG_NAME="acpica-unix2"
-PKG_VERSION="20130117"
+PKG_VERSION="20130328"
 PKG_REV="1"
 PKG_ARCH="i386 x86_64"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.acpica.org/"
 PKG_URL="https://www.acpica.org/download/$PKG_NAME-$PKG_VERSION.tar.gz"
+PKG_URL="https://acpica.org/sites/acpica/files/$PKG_NAME-$PKG_VERSION.tar.gz"
 PKG_DEPENDS=""
 PKG_BUILD_DEPENDS="toolchain flex bison"
 PKG_PRIORITY="optional"

packages/debug/acpica/patches/acpica-unix2-20130117-01-crosscompile.patch

@@ -1,12 +0,0 @@
-diff -uNr acpica-unix2-20130117-orig/generate/unix/Makefile.common acpica-unix2-20130117/generate/unix/Makefile.common
---- acpica-unix2-20130117-orig/generate/unix/Makefile.common	2013-01-17 20:47:44.000000000 +0100
-+++ acpica-unix2-20130117/generate/unix/Makefile.common	2013-02-07 15:13:59.000000000 +0100
-@@ -6,7 +6,7 @@
- # Get the OS machine architecture. Anything with a "64" in the returned
- # string will be treated as a 64-bit OS. Otherwise, the default is 32-bit.
- #
--HARDWARE_NAME := $(shell uname -m)
-+HARDWARE_NAME=$(BITS)
- BITS=0
- 
- #

packages/debug/pmtools/build

@@ -23,8 +23,15 @@
 . config/options $1
 
 cd $PKG_BUILD
-make PREFIX=/usr \
-     CC="$TARGET_CC" \
-     AR="$TARGET_AR" \
+make CC="$TARGET_CC" \
      CFLAGS="$TARGET_CFLAGS -Wall -Wstrict-prototypes -Wdeclaration-after-statement -Os -s -D_LINUX -DDEFINE_ALTERNATE_TYPES -I../include" \
-     CPPFLAGS="$TARGET_CPPFLAGS" \
+     -C acpidump acpidump
+
+make CC="$TARGET_CC" \
+     CFLAGS="$TARGET_CFLAGS -Wall -Wstrict-prototypes -Wdeclaration-after-statement -Os -s -D_LINUX -DDEFINE_ALTERNATE_TYPES -I../include" \
+     -C acpixtract acpixtract
+
+make CC="$TARGET_CC" \
+     CFLAGS="$TARGET_CFLAGS -Wall -Wstrict-prototypes -Wdeclaration-after-statement -Os -s -D_LINUX -DDEFINE_ALTERNATE_TYPES -I../include" \
+     -C madt madt
+

packages/debug/pmtools/meta

@@ -19,12 +19,12 @@
 ################################################################################
 
 PKG_NAME="pmtools"
-PKG_VERSION="20071116"
+PKG_VERSION="20110323"
 PKG_REV="1"
 PKG_ARCH="i386 x86_64"
 PKG_LICENSE="GPL"
 PKG_SITE="https://lesswatts.org/projects/acpi/utilities.php"
-PKG_URL="https://lesswatts.org/patches/linux_acpi/$PKG_NAME-$PKG_VERSION.tar.gz"
+PKG_URL="http://mirror.linux.org.au/linux/kernel/people/lenb/acpi/utils/$PKG_NAME-$PKG_VERSION.tar.bz2"
 PKG_DEPENDS=""
 PKG_BUILD_DEPENDS="toolchain"
 PKG_PRIORITY="optional"

packages/debug/pmtools/patches/pmtools-madt.patch

@@ -0,0 +1,25 @@
+diff -Naur pmtools/madt/Makefile pmtools.patch/madt/Makefile
+--- pmtools/madt/Makefile	2005-11-11 18:07:04.000000000 +0100
++++ pmtools.patch/madt/Makefile	2007-11-16 19:48:56.000000000 +0100
+@@ -1,6 +1,16 @@
++PROG= madt
++SRCS=	madt.c
++
++all: madt
++$(PROG) : $(SRCS)
++	$(CC) $(CFLAGS) $(SRCS) -o $(PROG)
++
+ test: madt
+-	./madt < APIC
+-madt: madt.c acpi.h tables.c
+-	cc -o madt madt.c
+-clean:
+-	rm madt
++	./madt < example.APIC.dat
++	./madt < example.APIC.bad.dat
++
++CLEANFILES= $(PROG)
++
++clean : 
++	rm -f $(CLEANFILES) $(patsubst %.c,%.o, $(SRCS)) *~
++

packages/debug/pmtools/unpack

@@ -2,7 +2,7 @@
 
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
+#      Copyright (C) 2013 Dag Wieers ([email protected])
 #
 #  This Program is free software; you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by

packages/debug/powertop/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://01.org/powertop/"
 PKG_URL="https://01.org/powertop/sites/default/files/downloads/$PKG_NAME-$PKG_VERSION.tar.gz"
-PKG_DEPENDS="ncurses pciutils libnl"
+PKG_DEPENDS="ncurses pciutils"
 PKG_BUILD_DEPENDS="toolchain ncurses pciutils libnl"
 PKG_PRIORITY="optional"
 PKG_SECTION="system"

packages/debug/smem/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="smem"
-PKG_VERSION="1.2"
+PKG_VERSION="1.3"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/debug/wireless_tools/build

@@ -22,10 +22,10 @@
 
 . config/options $1
 
+# wireless_tools fails to build on some systems with LTO enabled
+  strip_lto
+
 cd $PKG_BUILD
 
-make PREFIX=/usr \
-     CC="$TARGET_CC" \
-     AR="$TARGET_AR" \
-     CFLAGS="$TARGET_CFLAGS" \
-     CPPFLAGS="$TARGET_CPPFLAGS" \
+make PREFIX=/usr CC="$CC" AR="$AR" \
+     CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" iwmulticall

packages/debug/wireless_tools/install

@@ -23,13 +23,8 @@
 . config/options $1
 
 mkdir -p $INSTALL/usr/bin/
-  cp $PKG_BUILD/iwconfig $INSTALL/usr/bin/
-  cp $PKG_BUILD/iwgetid $INSTALL/usr/bin/
-  cp $PKG_BUILD/iwevent $INSTALL/usr/bin/
-  cp $PKG_BUILD/iwlist $INSTALL/usr/bin/
-  cp $PKG_BUILD/iwspy $INSTALL/usr/bin/
-  cp $PKG_BUILD/iwpriv $INSTALL/usr/bin/
-  cp $PKG_BUILD/ifrename $INSTALL/usr/bin/
-
-mkdir -p $INSTALL/usr/lib/
-  cp $PKG_BUILD/libiw.so.29 $INSTALL/usr/lib/
+  cp $PKG_BUILD/iwmulticall $INSTALL/usr/bin/iwconfig
+  ln -sf iwconfig $INSTALL/usr/bin/iwgetid
+  ln -sf iwconfig $INSTALL/usr/bin/iwlist
+  ln -sf iwconfig $INSTALL/usr/bin/iwspy
+  ln -sf iwconfig $INSTALL/usr/bin/iwpriv

packages/devel/arm-mem/build

@@ -24,4 +24,4 @@
 
 cd $PKG_BUILD
 
-make libcofi_rpi.so
+make libarmmem.so

packages/devel/arm-mem/install

@@ -26,4 +26,4 @@ mkdir -p $INSTALL/lib
   cp -P $PKG_BUILD/*.so* $INSTALL/lib
 
 mkdir -p $INSTALL/etc
-  echo "/lib/libcofi_rpi.so" >> $INSTALL/etc/ld.so.preload
+  echo "/lib/libarmmem.so" >> $INSTALL/etc/ld.so.preload

packages/devel/arm-mem/meta

@@ -18,19 +18,19 @@
 #  http://www.gnu.org/copyleft/gpl.html
 ################################################################################
 
-PKG_NAME="libcofi"
-PKG_VERSION="7313fbe"
+PKG_NAME="arm-mem"
+PKG_VERSION="8a1fbee"
 PKG_REV="1"
 PKG_ARCH="arm"
 PKG_LICENSE="GPL"
-PKG_SITE="https://github.com/simonjhall/copies-and-fills"
+PKG_SITE="https://github.com/bavison/arm-mem"
 PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
 PKG_DEPENDS=""
 PKG_BUILD_DEPENDS="toolchain"
 PKG_PRIORITY="optional"
 PKG_SECTION="devel"
-PKG_SHORTDESC="libcofi: a replacement for memcpy and memset functionality for the Raspberry Pi with the intention of gaining greater performance"
-PKG_LONGDESC="libcofi is a replacement for memcpy and memset functionality for the Raspberry Pi with the intention of gaining greater performance"
+PKG_SHORTDESC="arm-mem: ARM-accelerated versions of selected functions from string.h"
+PKG_LONGDESC="arm-mem is a ARM-accelerated versions of selected functions from string.h"
 PKG_IS_ADDON="no"
 
 PKG_AUTORECONF="no"

packages/devel/attr/build

@@ -41,13 +41,13 @@ INSTALL_GROUP=root \
             --exec-prefix=/usr \
             --sysconfdir=/etc \
             --datadir=/usr/share \
-            --enable-shared \
-            --disable-static \
+            --disable-shared \
+            --enable-static \
 
 make
 
 mkdir -p $SYSROOT_PREFIX/usr/lib/
-  cp -P libattr/.libs/*.so* $SYSROOT_PREFIX/usr/lib/
+  cp libattr/.libs/libattr.a $SYSROOT_PREFIX/usr/lib/
 
 mkdir -p $SYSROOT_PREFIX/usr/include/attr
-  cp -P include/*.h $SYSROOT_PREFIX/usr/include/attr
+  cp include/*.h $SYSROOT_PREFIX/usr/include/attr

packages/devel/boost/build

@@ -34,8 +34,7 @@ sh bootstrap.sh \
 echo "using gcc : `$TARGET_CC -v 2>&1  | tail -n 1 |awk '{print $3}'` : $TARGET_CC  : <compileflags>\"$CFLAGS\" <linkflags>\"$LDFLAGS\" ;" \
   > tools/build/v2/user-config.jam
 
-$ROOT/$TOOLCHAIN/bin/bjam -d2 --toolset=gcc  \
-  link=shared \
+$ROOT/$TOOLCHAIN/bin/bjam -d2 --toolset=gcc link=static \
   --prefix=$SYSROOT_PREFIX/usr \
   --layout=system \
   --with-thread \

packages/devel/boost/meta

@@ -19,12 +19,12 @@
 ################################################################################
 
 PKG_NAME="boost"
-PKG_VERSION="1_52_0"
+PKG_VERSION="1_53_0"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="OSS"
 PKG_SITE="http://www.boost.org/"
-PKG_URL="$SOURCEFORGE_SRC/boost/boost/1.52.0/${PKG_NAME}_${PKG_VERSION}.tar.bz2"
+PKG_URL="$SOURCEFORGE_SRC/boost/boost/1.53.0/${PKG_NAME}_${PKG_VERSION}.tar.bz2"
 PKG_DEPENDS="zlib bzip2"
 PKG_BUILD_DEPENDS="toolchain boost-jam Python-host zlib bzip2"
 PKG_PRIORITY="optional"

packages/devel/dbus-glib/build

@@ -35,8 +35,8 @@ mkdir -p .build-target && cd .build-target
              --prefix=/usr \
              --sysconfdir=/etc \
              --localstatedir=/var \
-             --disable-static \
-             --enable-shared \
+             --enable-static \
+             --disable-shared \
              --disable-tests \
              --enable-asserts=no \
              --with-introspect-xml="$ROOT/$DBUS_DIR/.build-host/introspect.xml" \

packages/devel/elfutils/build

@@ -34,5 +34,16 @@ cd $PKG_BUILD
             --without-bzlib \
             --without-lzma \
 
-make V=1
-$MAKEINSTALL
+make V=1 -C libelf libelf.a
+make V=1 -C libebl libebl.a
+make V=1 -C libdwfl libdwfl.a
+make V=1 -C libdw libdw.a
+
+make DESTDIR="$SYSROOT_PREFIX" -C libelf install-includeHEADERS install-pkgincludeHEADERS
+make DESTDIR="$SYSROOT_PREFIX" -C libdw install-includeHEADERS install-pkgincludeHEADERS
+
+mkdir -p $SYSROOT_PREFIX/usr/lib
+  cp libelf/libelf.a $SYSROOT_PREFIX/usr/lib
+  cp libdw/libdw.a $SYSROOT_PREFIX/usr/lib
+
+  

packages/devel/elfutils/install

@@ -1,28 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
-#      Copyright (C) 2010-2011 Roman Weber ([email protected])
-#
-#  This Program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#
-#  This Program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.tv; see the file COPYING.  If not, write to
-#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
-#  http://www.gnu.org/copyleft/gpl.html
-################################################################################
-
-. config/options $1
-
-mkdir -p $INSTALL/usr/lib
-  cp -P $PKG_BUILD/libdw/*.so* $INSTALL/usr/lib
-  cp -P $PKG_BUILD/libelf/*.so* $INSTALL/usr/lib

packages/devel/glib/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="LGPL"
 PKG_SITE="http://www.gtk.org/"
 PKG_URL="http://ftp.gnome.org/pub/gnome/sources/glib/2.34/$PKG_NAME-$PKG_VERSION.tar.xz"
-PKG_DEPENDS="zlib $ICONV libffi pcre"
+PKG_DEPENDS="zlib $ICONV libffi"
 PKG_BUILD_DEPENDS="toolchain zlib $ICONV libffi pcre glib-host Python-host"
 PKG_PRIORITY="optional"
 PKG_SECTION="devel"

packages/devel/gmp/build

@@ -36,7 +36,6 @@ mkdir -p .objdir-target && cd .objdir-target
              --localstatedir=/var \
              --disable-static \
              --enable-shared \
-             --disable-mpbsd \
              --disable-cxx \
 
 make

packages/devel/gmp/meta

@@ -19,12 +19,12 @@
 ################################################################################
 
 PKG_NAME="gmp"
-PKG_VERSION="5.0.5"
+PKG_VERSION="5.1.2"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="LGPL"
 PKG_SITE="http://gmplib.org/"
-PKG_URL="http://ftp.sunet.se/pub/gnu/gmp/$PKG_NAME-$PKG_VERSION.tar.bz2"
+PKG_URL="ftp://ftp.gmplib.org/pub/$PKG_NAME-$PKG_VERSION/$PKG_NAME-$PKG_VERSION.tar.xz"
 PKG_DEPENDS=""
 PKG_BUILD_DEPENDS="toolchain"
 PKG_PRIORITY="optional"

packages/devel/gmp/patches/gmp-5.0.5-automake-1.13.patch

@@ -1,36 +0,0 @@
-diff -Naur gmp-5.0.5/configure.in gmp-5.0.5.patch/configure.in
---- gmp-5.0.5/configure.in	2012-05-06 13:19:49.000000000 +0200
-+++ gmp-5.0.5.patch/configure.in	2013-01-12 02:25:31.897257189 +0100
-@@ -65,8 +65,8 @@
- dnl  Note that there's a copy of these options in the top-level Makefile.am,
- dnl  so update there too if changing anything.
- dnl
--AM_INIT_AUTOMAKE([1.8 gnu no-dependencies $(top_builddir)/ansi2knr])
--AM_CONFIG_HEADER(config.h:config.in)
-+AM_INIT_AUTOMAKE([1.8 gnu no-dependencies])
-+AC_CONFIG_HEADERS(config.h:config.in)
- AM_MAINTAINER_MODE
- 
- 
-@@ -2228,9 +2228,6 @@
- echo "      MPN_PATH=\"$path\""
- 
- 
--# Automake ansi2knr support.
--AM_C_PROTOTYPES
--
- CL_AS_NOEXECSTACK
- 
- GMP_PROG_AR
-diff -Naur gmp-5.0.5/Makefile.am gmp-5.0.5.patch/Makefile.am
---- gmp-5.0.5/Makefile.am	2012-05-06 13:19:49.000000000 +0200
-+++ gmp-5.0.5.patch/Makefile.am	2013-01-12 02:25:09.603364249 +0100
-@@ -25,7 +25,7 @@
- # Makefiles in subdirectories, but here we must omit it so automake gives
- # the actual ansi2knr build rule, not "cd $(top_builddir) && make ansi2knr".
- #
--AUTOMAKE_OPTIONS = 1.8 gnu no-dependencies ansi2knr
-+AUTOMAKE_OPTIONS = 1.8 gnu no-dependencies
- 
- 
- # Libtool -version-info for libgmp.la and libmp.la.  See "Versioning" in the

packages/devel/libcap/build

@@ -33,6 +33,11 @@ make CC=$HOST_CC -C libcap _makenames
 
 setup_toolchain target
 
-make CC=$TARGET_CC CFLAGS="$TARGET_CFLAGS" lib=/lib
+make CC=$TARGET_CC CFLAGS="$TARGET_CFLAGS" lib=/lib -C libcap libcap.a
+
+mkdir -p $SYSROOT_PREFIX/usr/lib
+  cp libcap/libcap.a $SYSROOT_PREFIX/usr/lib
+
+mkdir -p $SYSROOT_PREFIX/usr/include/sys
+  cp libcap/include/sys/capability.h $SYSROOT_PREFIX/usr/include/sys
 
-$MAKEINSTALL -j1 RAISE_SETFCAP=no lib=/lib

packages/devel/libcap/install

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
-#      Copyright (C) 2010-2011 Roman Weber ([email protected])
-#
-#  This Program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#
-#  This Program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.tv; see the file COPYING.  If not, write to
-#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
-#  http://www.gnu.org/copyleft/gpl.html
-################################################################################
-
-. config/options $1
-
-mkdir -p $INSTALL/usr/lib
-  cp -P $PKG_BUILD/libcap/*.so* $INSTALL/usr/lib

packages/devel/libcap/meta

@@ -29,7 +29,7 @@ PKG_LICENSE="GPL"
 PKG_SITE=""
 #PKG_URL="http://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2/$PKG_NAME-$PKG_VERSION.tar.bz2"
 PKG_URL="http://www.mirrorservice.org/sites/ftp.kernel.org/pub/linux/libs/security/linux-privs/libcap2/$PKG_NAME-$PKG_VERSION.tar.bz2"
-PKG_DEPENDS="attr"
+PKG_DEPENDS=""
 PKG_BUILD_DEPENDS="toolchain attr"
 PKG_PRIORITY="optional"
 PKG_SECTION="devel"

packages/devel/libcec/meta

@@ -19,13 +19,13 @@
 ################################################################################
 
 PKG_NAME="libcec"
-PKG_VERSION="2.1.1"
+PKG_VERSION="2.1.3"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://libcec.pulse-eight.com/"
 PKG_URL="http://packages.pulse-eight.net/pulse/sources/libcec/$PKG_NAME-$PKG_VERSION.tar.gz"
-PKG_DEPENDS="systemd lockdev"
+PKG_DEPENDS="systemd"
 PKG_BUILD_DEPENDS="toolchain systemd lockdev"
 PKG_PRIORITY="optional"
 PKG_SECTION="system"

packages/devel/libftdi/build

@@ -29,9 +29,12 @@ LIBS="-lusb" \
 ./configure --host=$TARGET_NAME \
             --build=$HOST_NAME \
             --prefix=/usr \
+            --disable-shared \
+            --enable-static \
             --disable-libftdipp \
             --disable-python-binding \
             --without-examples \
+            --without-docs
 
 make
 $MAKEINSTALL

packages/devel/libiconv/build

@@ -23,6 +23,8 @@
 . config/options $1
 
 cd $PKG_BUILD
+chmod +x ./configure ./preload/configure ./libcharset/configure
+
 ./configure --host=$TARGET_NAME \
             --build=$HOST_NAME \
             --prefix=/usr \

packages/devel/libiconv/meta

@@ -19,12 +19,13 @@
 ################################################################################
 
 PKG_NAME="libiconv"
-PKG_VERSION="1.14"
+PKG_VERSION="20130504"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.gnu.org/software/libiconv/"
-PKG_URL="http://ftp.gnu.org/pub/gnu/libiconv/$PKG_NAME-$PKG_VERSION.tar.gz"
+# PKG_URL="http://ftp.gnu.org/pub/gnu/libiconv/$PKG_NAME-$PKG_VERSION.tar.gz"
+PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
 PKG_DEPENDS=""
 PKG_BUILD_DEPENDS="toolchain"
 PKG_PRIORITY="optional"

packages/devel/lockdev/build

@@ -28,8 +28,8 @@ mkdir -p m4 && do_autoreconf
             --build=$HOST_NAME \
             --prefix=/usr \
             --sysconfdir=/etc \
-            --disable-static \
-            --enable-shared \
+            --enable-static \
+            --disable-shared \
 
 make
 

packages/devel/lockdev/install

@@ -1,26 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
-#
-#  This Program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#
-#  This Program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.tv; see the file COPYING.  If not, write to
-#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
-#  http://www.gnu.org/copyleft/gpl.html
-################################################################################
-
-. config/options $1
-
-mkdir -p $INSTALL/usr/lib
-  cp -P $PKG_BUILD/src/.libs/*.so* $INSTALL/usr/lib

packages/devel/newt/build

@@ -32,5 +32,13 @@ cd $PKG_BUILD
             --without-python \
             --without-tcl
 
-make
-$MAKEINSTALL
+make libnewt.a
+
+mkdir -p $SYSROOT_PREFIX/usr/lib
+  cp libnewt.a $SYSROOT_PREFIX/usr/lib
+
+mkdir -p $SYSROOT_PREFIX/usr/lib/pkgconfig
+  cp libnewt.pc $SYSROOT_PREFIX/usr/lib/pkgconfig
+
+mkdir -p $SYSROOT_PREFIX/usr/include
+  cp newt.h $SYSROOT_PREFIX/usr/include

packages/devel/newt/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="LGPL"
 PKG_SITE="https://fedorahosted.org/newt/"
 PKG_URL="https://fedorahosted.org/releases/n/e/newt/$PKG_NAME-$PKG_VERSION.tar.gz"
-PKG_DEPENDS="popt slang"
+PKG_DEPENDS=""
 PKG_BUILD_DEPENDS="toolchain popt slang"
 PKG_PRIORITY="optional"
 PKG_SECTION="devel"

packages/devel/newt/patches/newt-libdir.patch

@@ -0,0 +1,12 @@
+diff -Naur newt-0.52.14/Makefile.in newt-0.52.14.patch/Makefile.in
+--- newt-0.52.14/Makefile.in	2011-11-11 12:00:15.000000000 +0100
++++ newt-0.52.14.patch/Makefile.in	2013-05-30 23:40:30.104284277 +0200
+@@ -5,7 +5,7 @@
+ CPP = @CPP@
+ CFLAGS = @CFLAGS@
+ LDFLAGS = @LDFLAGS@
+-CPPFLAGS = -D_GNU_SOURCE -I/usr/include/slang @CPPFLAGS@ 
++CPPFLAGS = -D_GNU_SOURCE @CPPFLAGS@ 
+ GNU_LD = @GNU_LD@
+ 
+ VERSION = @VERSION@

packages/devel/pcre/build

@@ -22,6 +22,10 @@
 
 . config/options $1
 
+CFLAGS="$CFLAGS -fPIC"
+CXXFLAGS="$CXXFLAGS -fPIC"
+LDFLAGS="$LDFLAGS -fPIC"
+
 cd $PKG_BUILD
 mkdir -p m4 && do_autoreconf
 
@@ -32,8 +36,8 @@ mkdir -p .build-target && cd .build-target
              --exec-prefix=/usr \
              --sysconfdir=/etc \
              --datadir=/usr/share \
-             --enable-shared \
-             --disable-static \
+             --disable-shared \
+             --enable-static \
              --enable-utf8 \
              --enable-unicode-properties \
              --with-gnu-ld

packages/devel/pcre/install

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
-#
-#  This Program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#
-#  This Program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.tv; see the file COPYING.  If not, write to
-#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
-#  http://www.gnu.org/copyleft/gpl.html
-################################################################################
-
-. config/options $1
-
-mkdir -p $INSTALL/usr/lib
-  cp -P $PKG_BUILD/.build-target/.libs/libpcre*.so*[.0-9] $INSTALL/usr/lib
-

packages/devel/pcre/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="pcre"
-PKG_VERSION="8.32"
+PKG_VERSION="8.33"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="OSS"

packages/devel/popt/build

@@ -29,8 +29,8 @@ cd $PKG_BUILD
             --exec-prefix=/usr \
             --sysconfdir=/etc \
             --datadir=/usr/share \
-            --enable-shared \
-            --disable-static \
+            --disable-shared \
+            --enable-static \
 
 make
 $MAKEINSTALL

packages/devel/slang/build

@@ -38,5 +38,5 @@ cd $PKG_BUILD
             --without-z \
             --without-x \
 
-make -C src
-$MAKEINSTALL -C src
+make -C src static
+make DESTDIR="$SYSROOT_PREFIX" -C src install-static

packages/devel/yajl/build

@@ -32,3 +32,5 @@ cmake -DCMAKE_TOOLCHAIN_FILE=$CMAKE_CONF \
 make
 
 $MAKEINSTALL
+mv $SYSROOT_PREFIX/usr/lib/libyajl_s.a $SYSROOT_PREFIX/usr/lib/libyajl.a
+rm $SYSROOT_PREFIX/usr/lib/libyajl.so*

packages/graphics/Mesa/build

@@ -24,6 +24,8 @@
 
 get_graphicdrivers
 
+strip_gold
+
 if [ "$LLVM_SUPPORT" = "yes" ]; then
   export LLVM_CONFIG="$SYSROOT_PREFIX/usr/bin/llvm-config"
   MESA_GALLIUM_LLVM="--enable-gallium-llvm"

packages/graphics/Mesa/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="OSS"
 PKG_SITE="http://www.mesa3d.org/"
 PKG_URL="ftp://freedesktop.org/pub/mesa/$PKG_VERSION/MesaLib-$PKG_VERSION.tar.bz2"
-PKG_DEPENDS="libXdamage libdrm expat libXext libXfixes libXxf86vm libxcb libX11"
+PKG_DEPENDS="libXdamage libdrm expat libXext libXfixes libX11"
 PKG_BUILD_DEPENDS="toolchain Python-host makedepend libxml2-host expat glproto dri2proto libdrm libXext libXdamage libXfixes libXxf86vm libxcb libX11"
 PKG_PRIORITY="optional"
 PKG_SECTION="graphics"

packages/graphics/bcm2835-driver/build

@@ -33,4 +33,8 @@ mkdir -p $SYSROOT_PREFIX/usr/include
   cp -PR $FLOAT/opt/vc/include/* $SYSROOT_PREFIX/usr/include
 
 mkdir -p $SYSROOT_PREFIX/usr/lib
-  cp -PR $FLOAT/opt/vc/lib/*.so* $SYSROOT_PREFIX/usr/lib
+  cp -PR $FLOAT/opt/vc/lib/libEGL.so $SYSROOT_PREFIX/usr/lib
+  cp -PR $FLOAT/opt/vc/lib/libGLESv2.so $SYSROOT_PREFIX/usr/lib
+  cp -PR $FLOAT/opt/vc/lib/libbcm_host.so $SYSROOT_PREFIX/usr/lib
+  cp -PR $FLOAT/opt/vc/lib/libvchiq_arm.so $SYSROOT_PREFIX/usr/lib
+  cp -PR $FLOAT/opt/vc/lib/libvcos.so $SYSROOT_PREFIX/usr/lib

packages/graphics/bcm2835-driver/init.d/81_vllinit

@@ -22,11 +22,7 @@
 #
 # runlevels: openelec
 
-progress "set vll dir and run vcfiled service"
+progress "run vcfiled service"
 
   /usr/sbin/vcfiled
 
-  mkdir -p /storage/.config/vlls
-
-  # seems to still not work
-  # /usr/bin/vcgencmd set_vll_dir /storage/.config/vlls

packages/graphics/bcm2835-driver/install

@@ -32,17 +32,20 @@ mkdir -p $INSTALL/usr/sbin
   cp -PR $PKG_BUILD/$FLOAT/opt/vc/sbin/vcfiled $INSTALL/usr/sbin
 
 mkdir -p $INSTALL/usr/lib
-  cp -PR $PKG_BUILD/$FLOAT/opt/vc/lib/*.so* $INSTALL/usr/lib
+  cp -PR $PKG_BUILD/$FLOAT/opt/vc/lib/libEGL.so $INSTALL/usr/lib
+  cp -PR $PKG_BUILD/$FLOAT/opt/vc/lib/libGLESv2.so $INSTALL/usr/lib
+  cp -PR $PKG_BUILD/$FLOAT/opt/vc/lib/libbcm_host.so $INSTALL/usr/lib
+  cp -PR $PKG_BUILD/$FLOAT/opt/vc/lib/libopenmaxil.so $INSTALL/usr/lib
+  cp -PR $PKG_BUILD/$FLOAT/opt/vc/lib/libvchiq_arm.so $INSTALL/usr/lib
+  cp -PR $PKG_BUILD/$FLOAT/opt/vc/lib/libvcos.so $INSTALL/usr/lib
 
 # some usefull debug tools
 mkdir -p $INSTALL/usr/bin
   cp -PR $PKG_BUILD/$FLOAT/opt/vc/bin/vcdbg $INSTALL/usr/bin
+    cp -PR $PKG_BUILD/$FLOAT/opt/vc/lib/libdebug_sym.so $INSTALL/usr/lib
   cp -PR $PKG_BUILD/$FLOAT/opt/vc/bin/vcgencmd $INSTALL/usr/bin
   cp -PR $PKG_BUILD/$FLOAT/opt/vc/bin/tvservice $INSTALL/usr/bin
   cp -PR $PKG_BUILD/$FLOAT/opt/vc/bin/edidparser $INSTALL/usr/bin
 
 mkdir -p $INSTALL/opt/vc
   ln -sf /usr/lib $INSTALL/opt/vc/lib
-
-mkdir -p $INSTALL/sd
-  ln -sf /storage/.config/vlls $INSTALL/sd/vlls

packages/graphics/bcm2835-driver/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="bcm2835-driver"
-PKG_VERSION="2bcb2bc"
+PKG_VERSION="0d1b1d8"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="nonfree"

packages/graphics/glew/build

@@ -24,14 +24,15 @@
 
 cd $PKG_BUILD
 
-make CC="$CC" \
-     LD="$CC" \
-     AR="$AR" \
-     POPT="$CFLAGS" \
-     LDFLAGS.EXTRA="$LDFLAGS" \
-     GLEW_DEST="/usr" \
-     LIBDIR="/usr/lib"
+make CC="$CC" LD="$CC" AR="$AR" \
+     POPT="$CFLAGS" LDFLAGS.EXTRA="$LDFLAGS" \
+     GLEW_DEST="/usr" LIBDIR="/usr/lib" lib/libGLEW.a glew.pc
 
-make GLEW_DEST="$SYSROOT_PREFIX/usr" \
-     LIBDIR="$SYSROOT_PREFIX/usr/lib" \
-     install
+mkdir -p $SYSROOT_PREFIX/usr/lib
+  cp -PR lib/libGLEW.a $SYSROOT_PREFIX/usr/lib
+
+mkdir -p $SYSROOT_PREFIX/usr/lib/pkgconfig
+  cp -PR glew.pc $SYSROOT_PREFIX/usr/lib/pkgconfig
+
+mkdir -p $SYSROOT_PREFIX/usr/include
+  cp -PR include/GL $SYSROOT_PREFIX/usr/include

packages/graphics/glew/install

@@ -1,26 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
-#
-#  This Program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#
-#  This Program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.tv; see the file COPYING.  If not, write to
-#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
-#  http://www.gnu.org/copyleft/gpl.html
-################################################################################
-
-. config/options $1
-
-mkdir -p $INSTALL/usr/lib
-  cp -PR $PKG_BUILD/lib/lib*.so* $INSTALL/usr/lib

packages/graphics/glew/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="BSD"
 PKG_SITE="http://glew.sourceforge.net/"
 PKG_URL="$SOURCEFORGE_SRC/glew/glew/$PKG_VERSION/$PKG_NAME-$PKG_VERSION.tgz"
-PKG_DEPENDS="libX11 libXext libXi libXmu"
+PKG_DEPENDS="libX11 libXext libXi"
 PKG_BUILD_DEPENDS="toolchain libX11 libXext libXi libXmu"
 PKG_PRIORITY="optional"
 PKG_SECTION="graphics"

packages/graphics/libdrm/build

@@ -55,7 +55,7 @@ cd $PKG_BUILD
             --sysconfdir=/etc \
             --disable-static \
             --enable-shared \
-            --enable-udev \
+            --disable-udev \
             --enable-largefile \
             --with-kernel-source=$(kernel_path) \
             $DRM_CONFIG \

packages/graphics/libdrm/meta

@@ -25,8 +25,8 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://dri.freedesktop.org"
 PKG_URL="http://dri.freedesktop.org/libdrm/$PKG_NAME-$PKG_VERSION.tar.bz2"
-PKG_DEPENDS="systemd libpciaccess"
-PKG_BUILD_DEPENDS="toolchain libpthread-stubs systemd libpciaccess"
+PKG_DEPENDS="libpciaccess"
+PKG_BUILD_DEPENDS="toolchain libpthread-stubs libpciaccess"
 PKG_PRIORITY="optional"
 PKG_SECTION="graphics"
 PKG_SHORTDESC="libdrm: Userspace interface to kernel DRM services"

packages/graphics/libjpeg-turbo/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="libjpeg-turbo"
-PKG_VERSION="1.2.1"
+PKG_VERSION="1.3.0"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/graphics/libpng-host/build

@@ -39,4 +39,19 @@ mkdir -p .build-host && cd .build-host
              --enable-shared \
 
 make
-make install
+
+mkdir -p $ROOT/$TOOLCHAIN/lib
+  cp -PR .libs/*.so* $ROOT/$TOOLCHAIN/lib
+  ln -sf libpng15.so $ROOT/$TOOLCHAIN/lib/libpng.so
+
+mkdir -p $ROOT/$TOOLCHAIN/lib/pkgconfig
+  cp -PR libpng.pc $ROOT/$TOOLCHAIN/lib/pkgconfig/libpng15.pc
+  ln -sf libpng15.pc $ROOT/$TOOLCHAIN/lib/pkgconfig/libpng.pc
+
+mkdir -p $ROOT/$TOOLCHAIN/include/libpng15
+  cp -PR ../png.h $ROOT/$TOOLCHAIN/include/libpng15
+  cp -PR ../pngconf.h $ROOT/$TOOLCHAIN/include/libpng15
+  cp -PR pnglibconf.h $ROOT/$TOOLCHAIN/include/libpng15
+  ln -sf libpng15/png.h $ROOT/$TOOLCHAIN/include/png.h
+  ln -sf libpng15/pngconf.h $ROOT/$TOOLCHAIN/include/pngconf.h
+  ln -sf libpng15/pnglibconf.h $ROOT/$TOOLCHAIN/include/pnglibconf.h

packages/graphics/libpng/build

@@ -42,4 +42,7 @@ $MAKEINSTALL
 $SED "s:\([\"'= ]\)/usr:\\1$SYSROOT_PREFIX/usr:g" \
   $SYSROOT_PREFIX/usr/bin/libpng*-config
 
+$SED "s:libs=\"-lpng15\":libs=\"-lpng15 -lz\":g" \
+  $SYSROOT_PREFIX/usr/bin/libpng*-config
+
 cp -P $SYSROOT_PREFIX/usr/bin/libpng*-config $ROOT/$TOOLCHAIN/bin

packages/initramfs/devel/arm-mem-initramfs/install

@@ -22,10 +22,10 @@
 
 . config/options $1
 
-LIBCOFI_DIR="$BUILD/libcofi-*"
+ARMMEM_DIR="$BUILD/arm-mem-*"
 
 mkdir -p $INSTALL/lib
-  cp -P $LIBCOFI_DIR/*.so* $INSTALL/lib
+  cp -P $ARMMEM_DIR/*.so* $INSTALL/lib
 
 mkdir -p $INSTALL/etc
-  echo "/lib/libcofi_rpi.so" > $INSTALL/etc/ld.so.preload
+  echo "/lib/libarmmem.so" > $INSTALL/etc/ld.so.preload

packages/initramfs/devel/arm-mem-initramfs/meta

@@ -18,19 +18,19 @@
 #  http://www.gnu.org/copyleft/gpl.html
 ################################################################################
 
-PKG_NAME="libcofi"
+PKG_NAME="arm-mem"
 PKG_VERSION=""
 PKG_REV="1"
 PKG_ARCH="arm"
 PKG_LICENSE="GPL"
-PKG_SITE="https://github.com/simonjhall/copies-and-fills"
+PKG_SITE="https://github.com/bavison/arm-mem"
 PKG_URL=""
 PKG_DEPENDS=""
-PKG_BUILD_DEPENDS="toolchain libcofi"
+PKG_BUILD_DEPENDS="toolchain"
 PKG_PRIORITY="optional"
-PKG_SECTION="initramfs/devel"
-PKG_SHORTDESC="libcofi: a replacement for memcpy and memset functionality for the Raspberry Pi with the intention of gaining greater performance"
-PKG_LONGDESC="libcofi is a replacement for memcpy and memset functionality for the Raspberry Pi with the intention of gaining greater performance"
+PKG_SECTION="devel"
+PKG_SHORTDESC="arm-mem: ARM-accelerated versions of selected functions from string.h"
+PKG_LONGDESC="arm-mem is a ARM-accelerated versions of selected functions from string.h"
 PKG_IS_ADDON="no"
 
 PKG_AUTORECONF="no"

packages/initramfs/devel/eglibc-initramfs/meta

@@ -36,5 +36,5 @@ PKG_IS_ADDON="no"
 PKG_AUTORECONF="no"
 
 if [ "$OPENMAX" = "bcm2835-driver" ]; then
-  PKG_DEPENDS="$PKG_DEPENDS libcofi-initramfs"
+  PKG_DEPENDS="$PKG_DEPENDS arm-mem-initramfs"
 fi

packages/initramfs/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.openelec.tv"
 PKG_URL=""
-PKG_DEPENDS="eglibc-initramfs busybox-initramfs linux-initramfs plymouth-lite diskdev_cmds-initramfs"
+PKG_DEPENDS="eglibc-initramfs busybox-initramfs linux-initramfs plymouth-lite diskdev_cmds-initramfs dosfstools-initramfs e2fsprogs-initramfs"
 PKG_BUILD_DEPENDS="toolchain eglibc-initramfs busybox-initramfs"
 PKG_PRIORITY="optional"
 PKG_SECTION="initramfs"

packages/initramfs/sysutils/busybox-initramfs/config/busybox-initramfs.conf

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Busybox version: 1.21.0
-# Tue Jan 22 01:39:02 2013
+# Thu May 30 20:13:41 2013
 #
 CONFIG_HAVE_DOT_CONFIG=y
 
@@ -205,10 +205,10 @@ CONFIG_CHROOT=y
 CONFIG_CP=y
 # CONFIG_FEATURE_CP_LONG_OPTIONS is not set
 # CONFIG_CUT is not set
-# CONFIG_DD is not set
-# CONFIG_FEATURE_DD_SIGNAL_HANDLING is not set
-# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
-# CONFIG_FEATURE_DD_IBS_OBS is not set
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_THIRD_STATUS_LINE=y
+CONFIG_FEATURE_DD_IBS_OBS=y
 CONFIG_DF=y
 # CONFIG_FEATURE_DF_FANCY is not set
 # CONFIG_DIRNAME is not set

packages/initramfs/sysutils/busybox-initramfs/scripts/init

@@ -23,9 +23,9 @@
 ################################################################################
 
 # mount all needed special filesystems
-  /bin/busybox mount -t devtmpfs none /dev
-  /bin/busybox mount -t proc none /proc
-  /bin/busybox mount -t sysfs none /sys
+  /bin/busybox mount -t devtmpfs devtmpfs /dev
+  /bin/busybox mount -t proc proc /proc
+  /bin/busybox mount -t sysfs sysfs /sys
 
 # set needed variables
   MODULE_DIR=/lib/modules
@@ -58,7 +58,7 @@
   echo '1 4 1 7' > /proc/sys/kernel/printk
 
 # clear screen and hide cursor
-  /bin/busybox clear
+  clear
   echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink
 
 # parse command line arguments
@@ -88,9 +88,6 @@
       progress)
         PROGRESS=yes
         ;;
-      fastboot)
-        FASTBOOT=yes
-        ;;
       nosplash)
         SPLASH=no
         ;;
@@ -106,10 +103,6 @@
     esac
   done
 
-  if test "$FASTBOOT" = "yes"; then
-    IONICE="/bin/busybox ionice -c 1 -n 0"
-  fi
-
   if test "$DEBUG" = "yes"; then
     exec 3>&1
   else
@@ -129,7 +122,7 @@
     # show cursor
       echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink
 
-    /bin/busybox sh </dev/tty1 >/dev/tty1 2>&1
+    sh </dev/tty1 >/dev/tty1 2>&1
   }
 
   error() {
@@ -137,7 +130,7 @@
   # $1:action which caused error, $2:message
     echo "*** Error in $BOOT_STEP: $1: $2 ***"
     if [ -z "$DEBUG" ]; then
-      /bin/busybox halt
+      halt
     else
       debug_shell
     fi
@@ -164,10 +157,10 @@
     for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do
       ERR_ENV=1
 
-      $IONICE /bin/busybox mount $MOUNT_OPTIONS $1 $2 >&$SILENT_OUT 2>&1
+      mount $MOUNT_OPTIONS $1 $2 >&$SILENT_OUT 2>&1
       [ "$?" -eq "0" ] && ERR_ENV=0 && break
 
-      /bin/busybox usleep 1000000
+      usleep 1000000
     done
     [ "$ERR_ENV" -ne "0" ] && error "mount_common" "Could not mount $1"
   }
@@ -253,7 +246,7 @@
     NBD_PORT="${1#*:}"
     NBD_DEV="/dev/nbd$NBD_DEVS"
 
-    $IONICE /bin/busybox nbd-client $NBD_SERVER $NBD_PORT $NBD_DEV >&$SILENT_OUT 2>&1 || \
+    nbd-client $NBD_SERVER $NBD_PORT $NBD_DEV >&$SILENT_OUT 2>&1 || \
       error "nbd-client" "Could not connect to NBD server $1"
 
     mount_common "$NBD_DEV" "$2" "$3" "$4"
@@ -281,6 +274,10 @@
       LABEL=*|UUID=*|/*)
         MOUNT_CMD="mount_common"
         MOUNT_TARGET="$1"
+        # check filesystem
+          if [ -x /sbin/fsck ]; then
+            /sbin/fsck -a $1 &>/dev/null
+          fi
         ;;
       CIFS=*|SMB=*)
         MOUNT_CMD="mount_cifs"
@@ -307,49 +304,29 @@
   update() {
     if [ -f "$UPDATE_DIR/$2" -a -f "$3" ]; then
       echo "updating $1..."
-        $IONICE /bin/busybox mount -o remount,rw /flash
-        $IONICE /bin/busybox mv $UPDATE_DIR/$2 $3
+        mount -o remount,rw /flash
+        mv $UPDATE_DIR/$2 $3
         # loopback file needs writable /flash all the time
         if [ "${disk%%=*}" != "FILE" ]; then
-          $IONICE /bin/busybox mount -o remount,ro /flash
+          mount -o remount,ro /flash
         fi
-        $IONICE /bin/busybox sync
+        sync
     fi
   }
 
   update_bootloader() {
-    if [ -f "/flash/$IMAGE_SYSTEM" ]; then
-    # /flash is filesystem with system image file
-      export BOOT_ROOT="/flash"
-      export SYSTEM_ROOT="/sysroot"
+    export BOOT_ROOT="/flash"
+    export SYSTEM_ROOT="/sysroot"
 
-      mount_part "/flash/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
+    mount_part "/flash/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
 
-      if [ -f $SYSTEM_ROOT/usr/share/bootloader/update.sh ]; then
-        echo "updating Bootloader..."
-          $IONICE /bin/busybox sh $SYSTEM_ROOT/usr/share/bootloader/update.sh
-          $IONICE /bin/busybox sync
-      fi
-
-      umount /sysroot
+    if [ -f $SYSTEM_ROOT/usr/share/bootloader/update.sh ]; then
+      echo "updating Bootloader..."
+        sh $SYSTEM_ROOT/usr/share/bootloader/update.sh
+        sync
     fi
-  }
 
-  hfsdiskprep() {
-    for DEVICE in /dev/sd*; do
-      for device in $(/bin/busybox blkid $DEVICE); do
-        case $device in
-          TYPE=*)
-            FS_TYPE=${device#TYPE=}
-            ;;
-        esac
-      done
-
-      if [ "$FS_TYPE" = "\"hfs\"" -o "$FS_TYPE" = "\"hfsplus\"" ]; then
-        progress "check filesystem $DEVICE [$FS_TYPE]..."
-        /bin/fsck_hfs -r -y $DEVICE >&$SILENT_OUT 2>&1
-      fi
-    done
+    umount /sysroot
   }
 
   load_modules() {
@@ -358,7 +335,7 @@
     [ ! -f "/etc/modules" ] && return
     for module in $(cat /etc/modules); do
       progress "Loading kernel module $module"
-      /bin/busybox insmod "$MODULE_DIR/$module.ko" || \
+      insmod "$MODULE_DIR/$module.ko" || \
         progress "... Failed to load kernel module $module, skipping"
     done
   }
@@ -386,15 +363,6 @@
     fi
   }
 
-  check_disks() {
-    progress "Checking disks"
-
-    if [ -x /bin/fsck_hfs ]; then
-    # deal with hfs partitions
-      hfsdiskprep
-    fi
-  }
-
   mount_flash() {
     progress "Mounting flash"
 
@@ -408,11 +376,11 @@
       if [ "${disk%%=*}" = "FILE" ]; then
         target="${disk%%,*}"
         storage_loop_file="/flash/${target#*=}"
-        $IONICE /bin/busybox mount -o remount,rw /flash
+        mount -o remount,rw /flash
 
         if [ ! -f "$storage_loop_file" ]; then
           echo "Creating storage loopback file: $storage_loop_file..."
-          STORAGE_USE=$(/bin/busybox df /flash/ | awk '/[0-9]%/{print $4}')
+          STORAGE_USE=$(df /flash/ | awk '/[0-9]%/{print $4}')
           STORAGE_USE=$(($STORAGE_USE / 1024 - $LIVE_FLASH_FREE_MIN))
 
           options="${disk#*,}"
@@ -437,27 +405,17 @@
             fi
           fi
 
-          if [ -f "/flash/$IMAGE_SYSTEM" ]; then
-            # /flash is filesystem with system image file
-            # use dd and mkfs.ext4 from system
-            mount_part "/flash/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
-            echo "Creating empty file, this can take a long time..."
-            /sysroot/bin/busybox dd if=/dev/zero of="$storage_loop_file" bs=1M count=$STORAGE_USE &>/dev/null
-            echo "Formating to EXT4 filesystem, this can take a long time..."
-            LD_LIBRARY_PATH=/sysroot/usr/lib /sysroot/usr/bin/mkfs.ext4 -F -L StorageLive "$storage_loop_file" &>/dev/null
-            /bin/busybox sync
-            umount /sysroot
-          else
-            # /flash is actual root filesystem
-            echo "Creating empty file, this can take a long time..."
-            /flash/bin/busybox dd if=/dev/zero of="$storage_loop_file" bs=1M count=$STORAGE_USE &>/dev/null
-            echo "Formating to EXT4 filesystem, this can take a long time..."
-            LD_LIBRARY_PATH=/flash/usr/lib /flash/usr/bin/mkfs.ext4 -F -L StorageLive "$storage_loop_file" &>/dev/null
-            /bin/busybox sync
-          fi
+          mount_part "/flash/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
+          echo "Creating empty file, this can take a long time..."
+          dd if=/dev/zero of="$storage_loop_file" bs=1M count=$STORAGE_USE &>/dev/null
+          echo "Formating to EXT4 filesystem, this can take a long time..."
+          # use mkfs.ext4 from SYSTEM
+          LD_LIBRARY_PATH=/sysroot/usr/lib /sysroot/sbin/mkfs.ext4 -F -L StorageLive "$storage_loop_file" &>/dev/null
+          sync
+          umount /sysroot
 
           echo "Done..."
-          /bin/busybox usleep 2000000
+          usleep 2000000
         fi
 
         mount_part "FILE=$storage_loop_file" "/storage" "loop,rw,noatime"
@@ -465,11 +423,11 @@
       fi
 
       if [ -n "$OVERLAY" ]; then
-        OVERLAY_DIR=`cat /sys/class/net/eth0/address | /bin/busybox tr -d :`
+        OVERLAY_DIR=`cat /sys/class/net/eth0/address | tr -d :`
 
         mount_part "$disk" "/storage" "rw,noatime"
         mkdir -p /storage/$OVERLAY_DIR
-        /bin/busybox umount /storage
+        umount /storage
 
       # split $disk into $target,$options so we can append $OVERLAY_DIR
         options="${disk#*,}"
@@ -500,26 +458,26 @@
 
       # check md5 sums if .nocheck doesn't exist
       if [ "$MD5_NOCHECK" -eq "0" -a -f "$UPDATE_DIR/${UPDATE_KERNEL}.md5" -a -f "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" ] ; then
-        /bin/busybox sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_KERNEL}.md5"
-        /bin/busybox sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_SYSTEM}.md5"
+        sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_KERNEL}.md5"
+        sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_SYSTEM}.md5"
 
         echo "Checking ${UPDATE_KERNEL}.md5..."
-        /bin/busybox md5sum -c "$UPDATE_DIR/${UPDATE_KERNEL}.md5" || MD5_FAILED="1"
+        md5sum -c "$UPDATE_DIR/${UPDATE_KERNEL}.md5" || MD5_FAILED="1"
 
         echo "Checking ${UPDATE_SYSTEM}.md5..."
-        /bin/busybox md5sum -c "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" || MD5_FAILED="1"
+        md5sum -c "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" || MD5_FAILED="1"
       else
         echo "missing ${UPDATE_KERNEL}.md5 or ${UPDATE_SYSTEM}.md5..."
         MD5_FAILED="1"
       fi
 
       # get sizes
-      FLASH_FREE=$(/bin/busybox df /flash/ | awk '/[0-9]%/{print $4}')
+      FLASH_FREE=$(df /flash/ | awk '/[0-9]%/{print $4}')
       FLASH_FREE=$(( $FLASH_FREE * 1024 ))
-      OLD_KERNEL=$(/bin/busybox stat -t "/flash/$IMAGE_KERNEL" | awk '{print $2}')
-      OLD_SYSTEM=$(/bin/busybox stat -t "/flash/$IMAGE_SYSTEM" | awk '{print $2}')
-      NEW_KERNEL=$(/bin/busybox stat -t "$UPDATE_DIR/$UPDATE_KERNEL" | awk '{print $2}')
-      NEW_SYSTEM=$(/bin/busybox stat -t "$UPDATE_DIR/$UPDATE_SYSTEM" | awk '{print $2}')
+      OLD_KERNEL=$(stat -t "/flash/$IMAGE_KERNEL" | awk '{print $2}')
+      OLD_SYSTEM=$(stat -t "/flash/$IMAGE_SYSTEM" | awk '{print $2}')
+      NEW_KERNEL=$(stat -t "$UPDATE_DIR/$UPDATE_KERNEL" | awk '{print $2}')
+      NEW_SYSTEM=$(stat -t "$UPDATE_DIR/$UPDATE_SYSTEM" | awk '{print $2}')
 
       # old KERNEL+SYSTEM+free space - new KERNEL+SYSTEM must be higher then 5MB
       # at least 5MB free after update
@@ -543,47 +501,41 @@
           update_bootloader
           REBOOT="1"
         else
-          /bin/busybox rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
+          rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
           echo "md5 check failed. normal startup in 30s..."
-          /bin/busybox sync
-          /bin/busybox usleep 30000000
+          sync
+          usleep 30000000
         fi
-        /bin/busybox rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
+        rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
       else
-        /bin/busybox rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
+        rm -rf $UPDATE_DIR/[0-9a-zA-Z]* &>/dev/null
         echo "size check failed. normal startup in 30s..."
-        /bin/busybox sync
-        /bin/busybox usleep 30000000
+        sync
+        usleep 30000000
       fi
     fi
 
     if test "$REBOOT" -eq "1"; then
       echo "System reboots now..."
-      /bin/busybox usleep 2000000
-      /bin/busybox reboot
+      usleep 2000000
+      reboot
     fi
   }
 
   prepare_sysroot() {
     progress "Preparing system"
 
-    if [ -f "/flash/$IMAGE_SYSTEM" ]; then
-    # /flash is filesystem with system image file
-      if [ "$SYSTEM_TORAM" = "no" -o "$INSTALLED_MEMORY" -lt "$SYSTEM_TORAM_LIMIT" ]; then
-        mount_part "/flash/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
-      else
-        cp /flash/$IMAGE_SYSTEM /dev/$IMAGE_SYSTEM
-        mount_part "/dev/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
-      fi
-
-      /bin/busybox mount --move /flash /sysroot/flash
+    if [ "$SYSTEM_TORAM" = "no" -o "$INSTALLED_MEMORY" -lt "$SYSTEM_TORAM_LIMIT" ]; then
+      mount_part "/flash/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
     else
-    # /flash is actual root filesystem
-      /bin/busybox mount --move /flash /sysroot
+      cp /flash/$IMAGE_SYSTEM /dev/$IMAGE_SYSTEM
+      mount_part "/dev/$IMAGE_SYSTEM" "/sysroot" "ro,loop"
     fi
 
+    mount --move /flash /sysroot/flash
+
     if [ -n "$disk" ]; then
-      /bin/busybox mount --move /storage /sysroot/storage
+      mount --move /storage /sysroot/storage
     fi
 
     [ -f "/sysroot/sbin/init" ] || error "final_check" "Could not find system."
@@ -596,7 +548,6 @@
 # main boot sequence
   for BOOT_STEP in \
       load_modules \
-      check_disks \
       mount_flash \
       load_splash \
       mount_storage \

packages/initramfs/sysutils/diskdev_cmds-initramfs/install

@@ -24,7 +24,7 @@
 
 DISKDEV_CMDS_DIR="$BUILD/diskdev_cmds-*"
 
-mkdir -p $INSTALL/bin
-  cp $DISKDEV_CMDS_DIR/fsck_hfs.tproj/fsck_hfs $INSTALL/bin
-  ln -sf fsck_hfs $INSTALL/bin/fsck.hfs
-  ln -sf fsck_hfs $INSTALL/bin/fsck.hfsplus
+mkdir -p $INSTALL/sbin
+  cp $DISKDEV_CMDS_DIR/fsck_hfs.tproj/fsck_hfs $INSTALL/sbin
+    ln -sf fsck_hfs $INSTALL/sbin/fsck.hfs
+    ln -sf fsck_hfs $INSTALL/sbin/fsck.hfsplus

packages/initramfs/sysutils/dosfstools-initramfs/install

@@ -20,9 +20,11 @@
 #  http://www.gnu.org/copyleft/gpl.html
 ################################################################################
 
-. config/options
-
 . config/options $1
 
-mkdir -p $INSTALL/usr/lib
-  cp -P $PKG_BUILD/src/.libs/libftdi.so* $INSTALL/usr/lib
+DOSFSTOOLS_DIR="$BUILD/dosfstools-*"
+
+mkdir -p $INSTALL/sbin
+  cp $DOSFSTOOLS_DIR/dosfsck $INSTALL/sbin
+    ln -sf dosfsck $INSTALL/sbin/fsck.vfat
+    ln -sf dosfsck $INSTALL/sbin/fsck.msdos

packages/initramfs/sysutils/dosfstools-initramfs/meta

@@ -18,19 +18,19 @@
 #  http://www.gnu.org/copyleft/gpl.html
 ################################################################################
 
-PKG_NAME="xwiimote"
-PKG_VERSION="0b79d97"
+PKG_NAME="dosfstools-initramfs"
+PKG_VERSION=""
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
-PKG_SITE="https://github.com/dvdhrm/xwiimote"
-PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
-PKG_DEPENDS="dbus-glib systemd bluez"
-PKG_BUILD_DEPENDS="toolchain dbus-glib systemd bluez"
+PKG_SITE="http://daniel-baumann.ch/software/dosfstools/"
+PKG_URL=""
+PKG_DEPENDS=""
+PKG_BUILD_DEPENDS="toolchain dosfstools"
 PKG_PRIORITY="optional"
-PKG_SECTION="sysutils/remote"
-PKG_SHORTDESC="xwiimote: Nintendo Wii Remote Linux Device Driver Tools"
-PKG_LONGDESC="xwiimote contains tools and libraries related to the open source Nintendo Wii Remote linux device driver"
+PKG_SECTION="tools"
+PKG_SHORTDESC="dosfstools: utilities for making and checking MS-DOS FAT filesystems."
+PKG_LONGDESC="dosfstools contains utilities for making and checking MS-DOS FAT filesystems."
 PKG_IS_ADDON="no"
 
 PKG_AUTORECONF="no"

packages/initramfs/sysutils/e2fsprogs-initramfs/install

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+. config/options $1
+
+E2FSPROGS_DIR="$BUILD/e2fsprogs-*"
+
+mkdir -p $INSTALL/sbin
+  cp $E2FSPROGS_DIR/e2fsck/e2fsck $INSTALL/sbin
+    ln -sf e2fsck $INSTALL/sbin/fsck.ext2
+    ln -sf e2fsck $INSTALL/sbin/fsck.ext3
+    ln -sf e2fsck $INSTALL/sbin/fsck.ext4
+    ln -sf e2fsck $INSTALL/sbin/fsck.ext4dev
+  cp $E2FSPROGS_DIR/misc/mke2fs $INSTALL/sbin
+    ln -sf mke2fs $INSTALL/sbin/mkfs.ext2
+    ln -sf mke2fs $INSTALL/sbin/mkfs.ext3
+    ln -sf mke2fs $INSTALL/sbin/mkfs.ext4
+    ln -sf mke2fs $INSTALL/sbin/mkfs.ext4dev
+  cp $E2FSPROGS_DIR/misc/fsck $INSTALL/sbin

packages/initramfs/sysutils/e2fsprogs-initramfs/meta

@@ -0,0 +1,36 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2012 Stephan Raue ([email protected])
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 51 Franklin Street, Suite 500, Boston, MA 02110, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+PKG_NAME="e2fsprogs-initramfs"
+PKG_VERSION=""
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="GPL"
+PKG_SITE="http://e2fsprogs.sourceforge.net/"
+PKG_URL=""
+PKG_DEPENDS=""
+PKG_BUILD_DEPENDS="toolchain e2fsprogs"
+PKG_PRIORITY="optional"
+PKG_SECTION="tools"
+PKG_SHORTDESC="e2fsprogs: Utilities for use with the ext2 filesystem"
+PKG_LONGDESC="The filesystem utilities for the EXT2 filesystem, including e2fsck, mke2fs, dumpe2fs, fsck, and others."
+PKG_IS_ADDON="no"
+
+PKG_AUTORECONF="no"

packages/lang/Python/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="OSS"
 PKG_SITE="http://www.python.org/"
 PKG_URL="http://www.python.org/ftp/python/$PKG_VERSION/$PKG_NAME-$PKG_VERSION.tar.xz"
-PKG_DEPENDS="sqlite expat zlib bzip2 openssl libffi file"
+PKG_DEPENDS="expat zlib bzip2 openssl libffi file"
 PKG_BUILD_DEPENDS="toolchain Python-host sqlite expat zlib bzip2 openssl libffi"
 PKG_PRIORITY="optional"
 PKG_SECTION="lang"

packages/lang/php/meta

@@ -25,7 +25,7 @@ PKG_ARCH="any"
 PKG_LICENSE="OpenSource"
 PKG_SITE="http://www.php.net"
 PKG_URL="http://www.php.net/distributions/$PKG_NAME-$PKG_VERSION.tar.bz2"
-PKG_DEPENDS="zlib pcre sqlite curl"
+PKG_DEPENDS="zlib curl"
 PKG_BUILD_DEPENDS="toolchain zlib pcre sqlite curl"
 PKG_PRIORITY="optional"
 PKG_SECTION="web"

packages/linux-firmware/dvb-firmware/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="dvb-firmware"
-PKG_VERSION="0.0.31"
+PKG_VERSION="0.0.35"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="Free-to-use"

packages/linux-firmware/wlan-firmware/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="wlan-firmware"
-PKG_VERSION="0.0.10"
+PKG_VERSION="0.0.12"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="Free-to-use"

packages/linux/build

@@ -29,9 +29,6 @@ else
   KERNEL_IMAGE="bzImage"
 fi
 
-# dont build parallel
-  MAKEFLAGS=-j1
-
 cd $(kernel_path)
 rm -rf modules
 mkdir -p modules
@@ -52,20 +49,6 @@ cd -
 cd $(kernel_path)
 LDFLAGS="" make $KERNEL_IMAGE
 
-( cd tools/power/cpupower
-
-  # dont use some optimizations because of build problems
-    LDFLAGS=`echo $LDFLAGS | sed -e "s|-Wl,--as-needed||"`
-
-  export CFLAGS="$CFLAGS -I$SYSROOT_PREFIX/usr/include"
-  export LDFLAGS="$LDFLAGS -L$SYSROOT_PREFIX/lib -L$SYSROOT_PREFIX/usr/lib"
-
-  make CROSS="$TARGET_PREFIX" \
-       V=1 \
-       DEBUG=false \
-       NLS=false \
-)
-
 if [ "$DEVTOOLS" = yes ]; then
   ( cd tools/perf
 

packages/linux/init.d/02_cpupower

@@ -24,5 +24,20 @@
 # runlevels: openelec, textmode
 
 progress "set cpu's to full power"
+  for i in /sys/devices/system/cpu/*/cpufreq/scaling_governor; do
+    printf "performance" > $i
+  done 2>/dev/null
+
+progress "set onedemand threshold"
+  if [ -f /sys/devices/system/cpu/cpufreq/ondemand/up_threshold ]; then
+    echo 50 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+  fi
+
+(
+  usleep 40000000
+  progress "set cpu's to 'ondemand'"
+  for i in /sys/devices/system/cpu/*/cpufreq/scaling_governor; do
+    printf "ondemand" > $i
+  done 2>/dev/null
+)&
 
-  cpupower frequency-set -g performance > /dev/null 2>&1