Added: 2048 core

2026-11-11 02:51:43 -10:00 · 2014-07-27 16:37:45 +02:00
2144 changed files with 339397 additions and 1118654 deletions
@@ -1,22 +1,105 @@
-### Questions about Lakka?
+### Questions about OpenELEC?

-To get your questions answered, please ask in the [Lakka forum](https://forums.libretro.com/c/libretro/lakka-tv-general) or on IRC: \#lakka on freenode.net.
+To get your questions answered, please ask in the OpenELEC [Forum], on IRC: 
+\#openelec on freenode.net, or [webchat]. 

 Do not open an issue.

 ### Issue Reports

-**BEFORE you report a bug make sure you have tried the [latest nightly version of Lakka](http://sources.lakka.tv/nightly/). Your bug might be already fixed.**
+**BEFORE you report a bug make sure you got the latest testing version of 
+OpenELEC. Your bug might be already fixed.**

-If you are at all unsure whether it's a bug in Lakka or a problem with something else, post in the [Lakka forum](https://forums.libretro.com/c/libretro/lakka-tv-general)  instead. If it turns out that it is a bug, an issue can always be opened later.
+If you are at all unsure whether it's a bug in OpenELEC or a problem with 
+something else, post in the OpenELEC [Forum] instead. If it turns out that it is
+a bug, an issue can always be opened later.

-If you are sure that it's a bug in Lakka  and you have not found a similar issue, open a new [issue](https://github.com/libretro/Lakka/issues) and try to answer the following questions:
+If you are sure that it's a bug in OpenELEC and you have not found a [similar issue], open a new [issue]
+and try to answer the following questions:
 - What did you do?
 - What did you expect to happen?
 - What happened instead?

-**It is important to provide logs for debugging as part of your Issue. Instructions for generating logs can be found in the [Troubleshooting Lakka](http://www.lakka.tv/doc/Troubleshooting-Lakka/) documentation.**
+**It is also importent to provide logs for debugging.
+A zip file can be found in the [logfiles] samba share, this will contain all the logs needed.**

-Make sure to specify which version of Lakka you are using.
+Make sure to specify which version of OpenELEC you are using.
+- OpenELEC version
+- OpenELEC build
+- OpenELEC arch

-Feature requests are great, but they usually end up lying around the issue tracker indefinitely. Sending a [Pull Request](https://github.com/libretro/Lakka/pulls) is a much better way of getting a particular feature into Lakka.
+Please don't paste log messages in the issue reports or issue comments - use 
+[sprunge.us](http://sprunge.us) instead.
+
+Feature requests are great, but they usually end up lying around the issue
+tracker indefinitely. Sending a pull request is a much better way of getting a
+particular feature into OpenELEC.
+
+### Reporting build failures
+
+As buildsystem / core packages (toolchain) / random libraries change from time to time, it is required
+that you always do a clean build (make clean) before reporting build failures. Also make sure that you
+have a clean, unmodified git clone, we can't fix bugs caused by you failed to merge / rebase on
+your own fork.
+
+### Pull Requests
+
+- **Create topic branches**. Don't ask us to pull from your master branch.
+
+- **One pull request per feature**. If you want to do more than one thing, send
+  multiple pull requests.
+
+- **Send coherent history**. Make sure each individual commit in your pull
+  request is meaningful. If you had to make multiple intermediate commits while
+  developing, please squash them before sending them to us.
+
+Please follow this process; it's the best way to get your work included in the project:
+
+- [Fork](http://help.github.com/fork-a-repo/) the project, clone your fork,
+   and configure the remotes:
+
+```bash
+   # clone your fork of the repo into the current directory in terminal
+   git clone [email protected]:<your username>/OpenELEC.tv.git
+   # navigate to the newly cloned directory
+   cd OpenELEC.tv
+   # assign the original repo to a remote called "upstream"
+   git remote add upstream https://github.com/OpenELEC/OpenELEC.tv.git
+   ```
+
+- If you cloned a while ago, get the latest changes from upstream:
+
+   ```bash
+   # fetch upstream changes
+   git fetch upstream
+   # make sure you are on your 'master' branch
+   git checkout master
+   # merge upstream changes
+   git merge upstream/master
+   ```
+
+- Create a new topic branch to contain your feature, change, or fix:
+
+   ```bash
+   git checkout -b <topic-branch-name>
+   ```
+
+- Commit your changes in logical chunks. or your pull request is unlikely
+   be merged into the main project. Use git's
+   [interactive rebase](https://help.github.com/articles/interactive-rebase)
+   feature to tidy up your commits before making them public.
+
+- Push your topic branch up to your fork:
+
+   ```bash
+   git push origin <topic-branch-name>
+   ```
+
+- [Open a Pull Request](https://help.github.com/articles/using-pull-requests) with a
+    clear title and description.
+
+[Forum]: http://openelec.tv/forum
+[issue]: https://github.com/OpenELEC/OpenELEC.tv/issues
+[webchat]: http://openelec.tv/support/chat
+[logfiles]: http://wiki.openelec.tv/index.php?title=OpenELEC_FAQ#Support_Logs
+[similar issue]: https://github.com/OpenELEC/OpenELEC.tv/search?&ref=cmdform&type=Issues
@@ -1 +0,0 @@
-The issue tracker has moved to https://github.com/libretro/Lakka-LibreELEC/issues
@@ -2,18 +2,19 @@

 Lakka is a lightweight Linux distribution that transforms a small computer into a full blown emulation console.

-* **Powerful** - Built on top of the famous RetroArch emulator, Lakka is able to emulate a large range of hardware and has some useful features such as Braid-like rewinding, joypad hotplug and video streaming.
+## Features
+
+* **Powerful** - Built on top of the famous RetroArch emulator, Lakka is able to emulate a large range of hardware and has some usefull features such as Braid-like rewinding, joypad hotplug and video streaming.
 * **User friendly** - Lakka is easy to setup and use. Once installed to your SD card, you just have to put your rom on the card, plug your joypad and enjoy your favorite old games.
 * **Low cost** - The hardware required to run Lakka cost only $35. We also support PS3 and XBox360 controllers so you don't have to buy new ones. The power can be supplied by any micro USB adapter like the one of your smartphone.
 * **Open source** - Our code is free as in freedom and hosted on Github. We accept external contributions, and we do our best to integrate our own patches into upstream projects.

 ## Installation instructions

-Please refer to our website http://www.lakka.tv/get on how to setup Lakka.
+Please refer to our website http://www.lakka.tv/getlakka on how to setup Lakka.

 ## Support

 * [FAQ](https://github.com/lakkatv/Lakka/wiki/FAQ)
 * #lakkatv on irc.freenode.org
-* [Forums](https://forums.libretro.com/c/libretro/lakka-tv-general)
 * contact@lakka.tv
@@ -0,0 +1,8 @@
+ncurses-5.8/5.9:
+  - segfaults in nano and dialog -> using ncurses-5.7
+
+irserver:
+  - rework irserver/init.d for systemd
+
+settings addon:
+  - remove ps3 sleep? should be fixed in bluez 5.13/5.14
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <addon id="@PKG_ADDON_ID@"
-       name="@ADDON_NAME@"
+       name="@PKG_NAME@"
       version="@ADDON_VERSION@"
       provider-name="@PROVIDER_NAME@">
  <requires>
@@ -8,7 +8,9 @@
    <import addon="xbmc.python" version="2.1.0"/>
@REQUIRES@
  </requires>
-  <extension point="xbmc.python.module" library="lib/">
+  <extension point="@PKG_ADDON_TYPE@"
+             library="default.py">
+        <provides>executable</provides>
  </extension>
  <extension point="xbmc.addon.metadata">
    <summary>@PKG_SHORTDESC@</summary>
@@ -1,24 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<addon id="@PKG_ADDON_ID@"
-       name="@ADDON_NAME@"
-       version="@ADDON_VERSION@"
-       provider-name="@PROVIDER_NAME@">
-  <requires>
-    <import addon="os.openelec.tv" version="@OS_VERSION@"/>
-    <import addon="xbmc.python" version="2.1.0"/>
-@REQUIRES@
-  </requires>
-  <extension point="xbmc.python.script" library="default.py">
-    <provides>executable</provides>
-  </extension>
-  <extension point="xbmc.addon.metadata">
-    <summary>@PKG_SHORTDESC@</summary>
-    <description>
-@PKG_LONGDESC@
-    </description>
-    <disclaimer>
-@PKG_DISCLAIMER@
-    </disclaimer>
-    <platform>all</platform>
-  </extension>
-</addon>
@@ -1,24 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<addon id="@PKG_ADDON_ID@"
-       name="@ADDON_NAME@"
-       version="@ADDON_VERSION@"
-       provider-name="@PROVIDER_NAME@">
-  <requires>
-    <import addon="os.openelec.tv" version="@OS_VERSION@"/>
-    <import addon="xbmc.python" version="2.1.0"/>
-@REQUIRES@
-  </requires>
-  <extension point="xbmc.service" library="default.py">
-    <provides>executable</provides>
-  </extension>
-  <extension point="xbmc.addon.metadata">
-    <summary>@PKG_SHORTDESC@</summary>
-    <description>
-@PKG_LONGDESC@
-    </description>
-    <disclaimer>
-@PKG_DISCLAIMER@
-    </disclaimer>
-    <platform>all</platform>
-  </extension>
-</addon>
@@ -1,29 +0,0 @@
-# determines TARGET_CPU, if not forced by user
-  if [ -z "$TARGET_CPU" ]; then
-    TARGET_CPU=cortex-a53
-  fi
-
-# TARGET_CPU:
-# generic cortex-a35 cortex-a53 cortex-a57 cortex-a72
-# exynos-m1 qdf24xx thunderx xgene1 cortex-a57.cortex-a53
-# cortex-a72.cortex-a53
-
-# determine architecture's family
-  case $TARGET_CPU in
-    generic|cortex-a35|cortex-a53|cortex-a57|cortex-a72|exynos-m1|qdf24xx|thunderx|xgene1|cortex-a57.cortex-a53|cortex-a72.cortex-a53)
-      TARGET_SUBARCH=aarch64
-      TARGET_VARIANT=armv8-a
-      TARGET_ABI=eabi
-      TARGET_CPU_FLAGS="+crc+crypto"
-      TARGET_EXTRA_FLAGS="-mcpu=${TARGET_CPU}${TARGET_CPU_FLAGS}"
-      SIMD_SUPPORT="yes"
-      ;;
-  esac
-
-  TARGET_GCC_ARCH=${TARGET_SUBARCH/-}
-  TARGET_KERNEL_ARCH=arm64
-
-# setup ARCH specific *FLAGS
-  TARGET_CFLAGS="-march=${TARGET_VARIANT}${TARGET_CPU_FLAGS} -mabi=lp64 -Wno-psabi $TARGET_EXTRA_FLAGS"
-  TARGET_LDFLAGS="-march=${TARGET_VARIANT}${TARGET_CPU_FLAGS} -mtune=$TARGET_CPU"
-  GCC_OPTS="--with-abi=lp64 --with-arch=$TARGET_VARIANT"
@@ -31,10 +31,13 @@
      TARGET_FPU_FLAGS="-mfloat-abi=$TARGET_FLOAT -mfpu=$TARGET_FPU"
      SIMD_SUPPORT="no"
      ;;
-    cortex-a7|cortex-a15|cortex-a15.cortex-a7)
-      TARGET_SUBARCH=armv7ve
+    cortex-a7|cortex-a15)
+      TARGET_SUBARCH=armv7-a
      TARGET_ABI=eabi
-      TARGET_EXTRA_FLAGS="-mcpu=$TARGET_CPU"
+      # It's not currently possible to specify the exact architecture variant (-mcpu)
+      # that A7/A15 supports in the command line so use -mtune here.
+      # see http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57907
+      TARGET_EXTRA_FLAGS="-mtune=$TARGET_CPU"
      TARGET_FPU_FLAGS="-mfloat-abi=$TARGET_FLOAT -mfpu=$TARGET_FPU"
      SIMD_SUPPORT="yes"
      ;;
@@ -1,9 +1,12 @@
 setup_toolchain() {
+  if [ "$1" = "--optimize" ]; then
+    OPTIMIZE=yes
+    shift
+  fi
+
  if [ "$1" = target ]; then
    export DESTIMAGE="target"

-    unset CPP
-
    export CC=$TARGET_CC
    export CXX=$TARGET_CXX
    export LD=$TARGET_LD
@@ -28,8 +31,6 @@ setup_toolchain() {
  elif [ "$1" = host ]; then
    export DESTIMAGE="host"

-    unset CPP
-
    export AWK=$HOST_AWK
    export CC=$HOST_CC
    export CXX=$HOST_CXX
@@ -55,22 +56,12 @@ setup_toolchain() {
 }

 kernel_path() {
-  if [ -e $ROOT/projects/$PROJECT/packages/linux/package.mk ]; then
-    . $ROOT/projects/$PROJECT/packages/linux/package.mk
-  else
-    . $ROOT/packages/linux/package.mk
-  fi
-
+  . $ROOT/packages/linux/package.mk
  echo $ROOT/$BUILD/${PKG_NAME}-${PKG_VERSION}
 }

 kernel_version() {
-  if [ -e $ROOT/projects/$PROJECT/packages/linux/package.mk ]; then
-    . $ROOT/projects/$PROJECT/packages/linux/package.mk
-  else
-    . $ROOT/packages/linux/package.mk
-  fi
-
+  . $ROOT/packages/linux/package.mk
  echo ${PKG_VERSION}
 }

@@ -82,16 +73,10 @@ get_module_dir() {
 # get package's build dir
 get_build_dir() {
  if [ ! -z $1 ] ; then
-    local _PKG_DIR=$(find $ROOT/projects/$PROJECT/packages -name $1 2>/dev/null)
-    if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
+    local _PKG_DIR=$(find $ROOT/packages -name $1)
+    if [ -d $_PKG_DIR -a -f $_PKG_DIR/package.mk ] ; then
      . $_PKG_DIR/package.mk
-    else
-      local _PKG_DIR=$(find $ROOT/packages -name $1 2>/dev/null)
-      if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
-        . $_PKG_DIR/package.mk
-      fi
    fi
-
    echo $ROOT/$BUILD/${PKG_NAME}-${PKG_VERSION}
  fi
 }
@@ -185,13 +170,14 @@ do_autoreconf() {

 strip_lto() {
  # strip out LTO optimization from *FLAGS
-  if [ -n "$GCC_OPTIM_LTO" ] ; then
-    CFLAGS=`echo $CFLAGS | sed -e "s|$GCC_OPTIM_LTO||g"`
-    CXXFLAGS=`echo $CXXFLAGS | sed -e "s|$GCC_OPTIM_LTO||g"`
-  fi
-  if [ -n "$LD_OPTIM_LTO" ] ; then
-    LDFLAGS=`echo $LDFLAGS | sed -e "s|$LD_OPTIM_LTO||g"`
-  fi
+  CFLAGS=`echo $CFLAGS | sed -e "s|-flto||g"`
+  CXXFLAGS=`echo $CXXFLAGS | sed -e "s|-flto||g"`
+  LDFLAGS=`echo $LDFLAGS | sed -e "s|-flto||g"`
+}
+
+strip_linker_plugin() {
+  # strip out usage from linker plugin
+  LDFLAGS=`echo $LDFLAGS | sed -e "s|-fuse-linker-plugin||g"`
 }

 strip_gold() {
@@ -277,9 +263,6 @@ dashes="==========================="
 }

 show_config() {
-  # load graphic configuration
-    get_graphicdrivers
-
  dashes="==========================="
  config_message="$config_message\n $dashes$dashes$dashes"
  config_message="$config_message\n Configuration for $DISTRONAME ($([ "$OFFICIAL" = "yes" ] && echo "official" || echo "unofficial"))"
@@ -307,24 +290,24 @@ show_config() {
  config_message="$config_message\n\n Graphic configuration:"
  config_message="$config_message\n $dashes$dashes"

-  if [ "$DISPLAYSERVER" = "x11" ] ; then
-    config_message="$config_message\n - Xorg Graphic Drivers:\t\t $GRAPHIC_DRIVERS"
-    config_message="$config_message\n - XORG Composite support:\t\t $COMPOSITE_SUPPORT"
-    config_message="$config_message\n - WindowManager:\t\t\t $WINDOWMANAGER"
-  fi
+  config_message="$config_message\n - XORG support:\t\t\t $XORG_SUPPORT"
+  config_message="$config_message\n - XORG Composite support:\t\t $COMPOSITE_SUPPORT"
+  config_message="$config_message\n - XORG Xinerama support:\t\t $XINERAMA_SUPPORT"
  config_message="$config_message\n - SDL support:\t\t\t\t $SDL_SUPPORT"
  config_message="$config_message\n - OpenGL (GLX) support (provider):\t $OPENGL_SUPPORT ($OPENGL)"
  config_message="$config_message\n - OpenGLES support (provider):\t\t $OPENGLES_SUPPORT ($OPENGLES)"
-  config_message="$config_message\n - uvesafb support:\t\t\t $UVESAFB_SUPPORT"
+  config_message="$config_message\n - WindowManager:\t\t\t $WINDOWMANAGER"
+  config_message="$config_message\n - Xorg Graphic Drivers:\t\t $GRAPHIC_DRIVERS"

  # Hardware decoder support

  config_message="$config_message\n\n Hardware decoder configuration:"
  config_message="$config_message\n $dashes$dashes"

-  config_message="$config_message\n - Kodi Player driver:\t\t\t $KODIPLAYER_DRIVER"
-  config_message="$config_message\n - VAAPI Support:\t\t\t $VAAPI_SUPPORT"
-  config_message="$config_message\n - VDPAU Support:\t\t\t $VDPAU_SUPPORT"
+  config_message="$config_message\n - Broadcom CrystalHD Decoder:\t\t $CRYSTALHD"
+  config_message="$config_message\n - XBMC Player driver:\t\t\t $XBMCPLAYER_DRIVER"
+  config_message="$config_message\n - VAAPI Support:\t\t\t $VAAPI"
+  config_message="$config_message\n - VDPAU Support:\t\t\t $VDPAU"

  # Input device configuration

@@ -335,7 +318,7 @@ show_config() {
  config_message="$config_message\n - ATV Remote support:\t\t\t $ATVCLIENT_SUPPORT"
  config_message="$config_message\n - CEC Adapter support:\t\t\t $CEC_SUPPORT"
  config_message="$config_message\n - IRTrans support:\t\t\t $IRSERVER_SUPPORT"
-  config_message="$config_message\n - Kodi Joystick support:\t\t $JOYSTICK_SUPPORT"
+  config_message="$config_message\n - XBMC Joystick support:\t\t $JOYSTICK_SUPPORT"

  # Misc. hardware configuration

@@ -343,7 +326,10 @@ show_config() {
  config_message="$config_message\n $dashes$dashes"

  config_message="$config_message\n - ALSA support:\t\t\t $ALSA_SUPPORT"
+  config_message="$config_message\n - Pulseaudio support:\t\t\t $PULSEAUDIO_SUPPORT"
+  config_message="$config_message\n - Blu-Ray support:\t\t\t $BLURAY_SUPPORT"
  config_message="$config_message\n - Bluetooth support:\t\t\t $BLUETOOTH_SUPPORT"
+  config_message="$config_message\n - Hardware Sensors support:\t\t $SENSOR_SUPPORT"
  config_message="$config_message\n - LCD drivers:\t\t\t\t $LCD_DRIVER"

  for config_driver in $ADDITIONAL_DRIVERS; do
@@ -354,20 +340,22 @@ show_config() {
    config_message="$config_message\n - Include firmware:\t\t\t $config_firmware"
  done

-  for config_modules in $INITRAMFS_MODULES; do
-    config_message="$config_message\n - Initramfs modules:\t\t\t $config_modules"
-  done
-
  # Network service configuration

  config_message="$config_message\n\n Network service configuration:"
  config_message="$config_message\n $dashes$dashes"

  config_message="$config_message\n - Avahi (Zeroconf) support:\t\t $AVAHI_DAEMON"
-  config_message="$config_message\n - NFS mounting support:\t\t $NFS_SUPPORT"
-  config_message="$config_message\n - SAMBA mounting support:\t\t $SAMBA_SUPPORT"
  config_message="$config_message\n - SAMBA server support:\t\t $SAMBA_SERVER"
  config_message="$config_message\n - SFTP server support:\t\t\t $SFTP_SERVER"
+  config_message="$config_message\n - PPTP support:\t\t\t $PPTP_SUPPORT"
+  config_message="$config_message\n - OpenVPN support:\t\t\t $OPENVPN_SUPPORT"
+  config_message="$config_message\n - XBMC Airplay support:\t\t $AIRPLAY_SUPPORT"
+  config_message="$config_message\n - XBMC Airtunes support:\t\t $AIRTUNES_SUPPORT"
+  config_message="$config_message\n - XBMC AFP support:\t\t\t $AFP_SUPPORT"
+  config_message="$config_message\n - XBMC NFS support:\t\t\t $NFS_SUPPORT"
+  config_message="$config_message\n - XBMC SAMBA client support:\t\t $SAMBA_SUPPORT"
+  config_message="$config_message\n - XBMC Webserver support:\t\t $WEBSERVER"

  # OS configuration

@@ -377,10 +365,10 @@ show_config() {
  config_message="$config_message\n - OEM Support:\t\t\t\t $OEM_SUPPORT"
  config_message="$config_message\n - Default ROOT Password:\t\t $ROOT_PASSWORD"
  config_message="$config_message\n - Bootloader:\t\t\t\t $BOOTLOADER"
-  if [ "$BOOTLOADER" = "u-boot" ]; then
-    config_message="$config_message\n   - U-Boot configuration:\t\t $UBOOT_CONFIG"
-    config_message="$config_message\n   - U-Boot config file:\t\t $UBOOT_CONFIGFILE"
-  fi
+if [ "$BOOTLOADER" = "u-boot" ]; then
+  config_message="$config_message\n - U-Boot configuration:\t\t $UBOOT_CONFIG"
+  config_message="$config_message\n - U-Boot config file:\t\t\t $UBOOT_CONFIGFILE"
+fi
  config_message="$config_message\n - UDevil support:\t\t\t $UDEVIL"
  config_message="$config_message\n - Installer support:\t\t\t $INSTALLER_SUPPORT"

@@ -390,46 +378,31 @@ show_config() {
  config_message="$config_message\n $dashes$dashes"

  config_message="$config_message\n - Swap Support:\t\t\t $SWAP_SUPPORT"
-  if [ "$SWAP_SUPPORT" = "yes" ]; then
-    config_message="$config_message\n   - Swapfile default size:\t\t $SWAPFILESIZE"
-  fi
+if [ "$SWAP_SUPPORT" = "yes" ]; then
+  config_message="$config_message\n - Swapfile default size:\t\t $SWAPFILESIZE"
+fi
  config_message="$config_message\n - exFAT Support (via Fuse):\t\t $EXFAT"
  config_message="$config_message\n - NTFS Support (via Fuse):\t\t $NTFS3G"
  config_message="$config_message\n - Install HFS Tools:\t\t\t $HFSTOOLS"

-  # Kodi configuration
+  # XBMC configuration

-  config_message="$config_message\n\n Kodi configuration:"
+  config_message="$config_message\n\n XBMC configuration:"
  config_message="$config_message\n $dashes$dashes"

-  config_message="$config_message\n - Kodi version:\t\t\t $MEDIACENTER"
-  config_message="$config_message\n - Kodi nonfree support:\t\t $KODI_NONFREE_SUPPORT"
-  config_message="$config_message\n - Kodi Blu-Ray support:\t\t $KODI_BLURAY_SUPPORT"
-  if [ "$KODI_BLURAY_SUPPORT" = "yes" ] ; then
-    config_message="$config_message\n   - Bluray BD+ support:\t\t $BLURAY_BDPLUS_SUPPORT"
-    config_message="$config_message\n   - Bluray AACS support:\t\t $BLURAY_AACS_SUPPORT"
-  fi
-  config_message="$config_message\n - Kodi DVDCSS support:\t\t\t $KODI_DVDCSS_SUPPORT"
-  config_message="$config_message\n - Kodi Airplay support:\t\t $KODI_AIRPLAY_SUPPORT"
-  config_message="$config_message\n - Kodi Airtunes support:\t\t $KODI_AIRTUNES_SUPPORT"
-  config_message="$config_message\n - Kodi NFS support:\t\t\t $KODI_NFS_SUPPORT"
-  config_message="$config_message\n - Kodi MySQL support:\t\t\t $KODI_MYSQL_SUPPORT"
-  config_message="$config_message\n - Kodi Optical Drive support:\t\t $KODI_OPTICAL_SUPPORT"
-  config_message="$config_message\n - Kodi SAMBA client support:\t\t $KODI_SAMBA_SUPPORT"
-  config_message="$config_message\n - Kodi SSH client support:\t\t $KODI_SSHLIB_SUPPORT"
-  config_message="$config_message\n - Kodi UPNP support:\t\t\t $KODI_UPNP_SUPPORT"
-  config_message="$config_message\n - Kodi Webserver support:\t\t $KODI_WEBSERVER_SUPPORT"
-
+  config_message="$config_message\n - XBMC version:\t\t\t $MEDIACENTER"
+  config_message="$config_message\n - XBMC nonfree support:\t\t $NONFREE_SUPPORT"
+  config_message="$config_message\n - XBMC DVDCSS support:\t\t\t $DVDCSS_SUPPORT"

  for config_skin in $SKINS; do
    config_message="$config_message\n - Include Skin:\t\t\t $config_skin"
  done

  config_message="$config_message\n - Default Skin:\t\t\t $SKIN_DEFAULT"
-  config_message="$config_message\n - Include extra fonts:\t\t\t $KODI_EXTRA_FONTS"
-  config_message="$config_message\n - Include RSXS Screensaver:\t\t $KODI_SCR_RSXS"
-  config_message="$config_message\n - Include ProjectM Visualization:\t $KODI_VIS_PROJECTM"
-  config_message="$config_message\n - Include Goom Visualization:\t\t $KODI_VIS_GOOM"
+  config_message="$config_message\n - Include extra fonts:\t\t\t $XBMC_EXTRA_FONTS"
+  config_message="$config_message\n - Include RSXS Screensaver:\t\t $XBMC_SCR_RSXS"
+  config_message="$config_message\n - Include ProjectM Visualization:\t $XBMC_VIS_PROJECTM"
+  config_message="$config_message\n - Include Goom Visualization:\t\t $XBMC_VIS_GOOM"

  config_message="$config_message\n"
  config_message="$config_message\n $dashes$dashes$dashes"
@@ -437,5 +410,5 @@ show_config() {
  config_message="$config_message\n $dashes$dashes$dashes"
  config_message="$config_message\n\n\n"

-  echo -e "$config_message"
+  echo -e $config_message
 }
@@ -21,9 +21,9 @@ if [ "$SDL_SUPPORT" = no ]; then
 fi

 if [ "$OPENGL_SUPPORT" = no ]; then
-  KODI_SCR_RSXS="no"
-  KODI_VIS_PROJECTM="no"
-  KODI_VIS_GOOM="no"
+  XBMC_SCR_RSXS="no"
+  XBMC_VIS_PROJECTM="no"
+  XBMC_VIS_GOOM="no"
 fi

 get_graphicdrivers() {
@@ -32,18 +32,22 @@ get_graphicdrivers() {
  fi

  for drv in $GRAPHIC_DRIVERS; do
+    if [ "$drv" = "dove" ]; then
+      XORG_DRIVERS="$XORG_DRIVERS dove"
+    fi
+
    if [ "$drv" = "i915" ]; then
      DRI_DRIVERS="$DRI_DRIVERS,i915"
      XORG_DRIVERS="$XORG_DRIVERS intel"
      COMPOSITE_SUPPORT="yes"
-      VAAPI_SUPPORT="yes"
+      LIBVA="$LIBVA libva-intel-driver"
    fi

    if [ "$drv" = "i965" ]; then
      DRI_DRIVERS="$DRI_DRIVERS,i965"
      XORG_DRIVERS="$XORG_DRIVERS intel"
      COMPOSITE_SUPPORT="yes"
-      VAAPI_SUPPORT="yes"
+      LIBVA="$LIBVA libva-intel-driver"
    fi

    if [ "$drv" = "nouveau" ]; then
@@ -54,16 +58,15 @@ get_graphicdrivers() {
      GALLIUM_DRIVERS="$GALLIUM_DRIVERS,nouveau"
      XORG_DRIVERS="$XORG_DRIVERS nouveau"
      COMPOSITE_SUPPORT="yes"
+#      LLVM_SUPPORT="yes"
    fi

    if [ "$drv" = "nvidia" ]; then
      XORG_DRIVERS="$XORG_DRIVERS nvidia"
-      VDPAU_SUPPORT="yes"
    fi

    if [ "$drv" = "nvidia-legacy" ]; then
      XORG_DRIVERS="$XORG_DRIVERS nvidia-legacy"
-      VDPAU_SUPPORT="yes"
    fi

    if [ "$drv" = "r200" ]; then
@@ -77,7 +80,6 @@ get_graphicdrivers() {
      XORG_DRIVERS="$XORG_DRIVERS ati"
      LLVM_SUPPORT="yes"
      COMPOSITE_SUPPORT="yes"
-      VDPAU_SUPPORT="yes"
    fi

    if [ "$drv" = "r600" ]; then
@@ -85,15 +87,13 @@ get_graphicdrivers() {
      XORG_DRIVERS="$XORG_DRIVERS ati"
      LLVM_SUPPORT="yes"
      COMPOSITE_SUPPORT="yes"
-      VDPAU_SUPPORT="yes"
    fi

    if [ "$drv" = "radeonsi" ]; then
      GALLIUM_DRIVERS="$GALLIUM_DRIVERS,radeonsi"
-      XORG_DRIVERS="$XORG_DRIVERS ati amdgpu"
+      XORG_DRIVERS="$XORG_DRIVERS ati"
      LLVM_SUPPORT="yes"
      COMPOSITE_SUPPORT="yes"
-      VDPAU_SUPPORT="yes"
    fi

  done
@@ -1 +1 @@
-Lakka - The DIY retro emulation console
+Welcome to OpenELEC - the powerful Mediacenter4you
@@ -1,10 +1,7 @@
 {
-  "name": "@DISTRONAME@_@PROJECT@",
+  "name": "@DISTRONAME@",
  "version": "@OPENELEC_VERSION@",
  "release_date": "@RELEASE_DATE@",
  "kernel": "@KERNEL_VERSION@",
-  "description": "@DESCRIPTION@",
-  "username": "root",
-  "password": "@ROOT_PASSWORD@",
-  "supported_hex_revisions": "@NOOBS_HEX@"
+  "description": "@DESCRIPTION@"
 }
@@ -1,15 +1,15 @@
 {
  "partitions": [
    {
-      "label":                     "@DISTRONAME@_@PROJECT@_System",
+      "label":                     "System",
      "filesystem_type":           "FAT",
-      "partition_size_nominal":    512,
+      "partition_size_nominal":    160,
      "want_maximised":            false,
-      "uncompressed_tarball_size": 170,
+      "uncompressed_tarball_size": 120,
      "mkfs_options":              ""
    },
    {
-      "label":                     "@DISTRONAME@_@PROJECT@_Storage",
+      "label":                     "Storage",
      "filesystem_type":           "ext4",
      "partition_size_nominal":    864,
      "want_maximised":            true,
@@ -452,7 +452,7 @@ hCHKXQk7K9saByvnHQxUtj4O8Ofzv0U52nazcrnNJuVSm43KDXcblPPv1+MnrFMm7h/xA77Hd8qS
         sodipodi:role="line"
         x="512"
         y="958.36218"
-         id="tspan3140">Lakka will appear in your home network</tspan><tspan
+         id="tspan3140">Lakka will appear in you home network</tspan><tspan
         sodipodi:role="line"
         x="512"
         y="1008.3622"
@@ -30,7 +30,7 @@ fi
 TARGET_CPPFLAGS=
 TARGET_CFLAGS="$TARGET_CFLAGS -Wall -pipe $GCC_OPTIM $GCC_OPTIM_LTO $PROJECT_CFLAGS"
 TARGET_CXXFLAGS="$TARGET_CFLAGS"
-TARGET_LDFLAGS="$TARGET_LDFLAGS $LD_OPTIM $LD_OPTIM_GOLD $LD_OPTIM_LTO"
+TARGET_LDFLAGS="$TARGET_LDFLAGS $LD_OPTIM $LD_OPTIM_GOLD $LD_OPTIM_LTO $GCC_OPTIM"
 TARGET_LIBDIR="$SYSROOT_PREFIX/lib $SYSROOT_PREFIX/usr/lib"
 TARGET_INCDIR="$SYSROOT_PREFIX/include $SYSROOT_PREFIX/usr/include"

@@ -1,14 +1,6 @@
 # set default language for buildsystem
  export LC_ALL=C

-# determines DISTRO, if not forced by user
-# default is OpenELEC
-if [ -z "$DISTRO" ]; then
-  DISTRO="OpenELEC"
-else
-  DISTRO="$DISTRO"
-fi
-
 # determines PROJECT, if not forced by user
 # default is Generic
 if [ -z "$PROJECT" ]; then
@@ -26,32 +18,22 @@ else
 fi

 ROOT=`pwd`
-DISTRO_DIR="$ROOT/distributions"
 PROJECT_DIR="$ROOT/projects"
 LINUX_DEPENDS="$PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf $ROOT/packages/linux/package.mk"

 # include versioning
  . config/version

-# read distro versioning if available
- if [ -f "$DISTRO_DIR/$DISTRO/version" ]; then
-   . $DISTRO_DIR/$DISTRO/version
- fi
-
-# read distro options if available
- if [ -f "$DISTRO_DIR/$DISTRO/options" ]; then
-   . $DISTRO_DIR/$DISTRO/options
- fi
-
 # read project options if available
 if [ -f "$PROJECT_DIR/$PROJECT/options" ]; then
   . $PROJECT_DIR/$PROJECT/options
 fi

-# read board options if available
- if [ -f "$PROJECT_DIR/$PROJECT/devices/$SYSTEM/options" ]; then
-   . $PROJECT_DIR/$PROJECT/devices/$SYSTEM/options
- fi
+# Target system library C (eglibc)
+  TARGET_LIBC="eglibc"
+
+# Library strip
+  LIBSTRIP="yes"

 # Need to point to your actual cc
 # If you have ccache installed, take care that LOCAL_CC don't point to it
@@ -70,9 +52,7 @@ LINUX_DEPENDS="$PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf $ROOT/package
 # Concurrency make level (-j option)
 #  Try value 1 (default) to 4 on single CPU computer, or more on
 #  multi-processor computer (like hyperthreading SMP CPU)
-  if test -z "${CONCURRENCY_MAKE_LEVEL}"; then
-    CONCURRENCY_MAKE_LEVEL=`cat /proc/cpuinfo | grep -c '^processor[[:cntrl:]]*:'`
-  fi
+  CONCURRENCY_MAKE_LEVEL=`cat /proc/cpuinfo | grep -c '^processor[[:cntrl:]]*:'`

 # cache size for ccache
 # Set the maximum size of the files stored in the cache. You can specify a
@@ -97,10 +77,5 @@ LINUX_DEPENDS="$PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf $ROOT/package
    . $HOME/.openelec/$PROJECT/options
  fi

-# read distro options from $HOME if available
-  if [ -f "$HOME/.openelec/options.$DISTRO" ]; then
-    . $HOME/.openelec/options.$DISTRO
-  fi
-
 . config/graphic
 . config/path $1
@@ -20,10 +20,6 @@ HOST_NAME=`$LOCAL_CC -dumpmachine`
 TARGET_NAME=$(echo $TARGET_SUBARCH | sed -e "s,-,,")-openelec-linux-gnu${TARGET_ABI}

 BUILD=$BUILD_BASE.$DISTRONAME-$PROJECT.$TARGET_ARCH-$OPENELEC_VERSION
-if [ -n "$BUILD_SUFFIX" ]; then
-  BUILD=$BUILD-$BUILD_SUFFIX
-fi
-
 TARGET_IMG=$ROOT/$TARGET
 TARGET_ADDONS="$TARGET_IMG/$ADDONS/$ADDON_PATH"
 ADDON_BUILD="$BUILD/$ADDONS/$1"
@@ -68,46 +64,26 @@ SED="sed -i"
  PKG_IS_ADDON="no"

  if [ -n "$1" ]; then
-    _PKG_ROOT_NAME=$(echo $1 | cut -d: -f1)
-    _ALL_DIRS=""
-    _FOUND=0
-    PKG_DIR=""
-
-    # first check project folder for a package
-    for DIR in $(find $ROOT/projects/$PROJECT/packages -type d -name $_PKG_ROOT_NAME 2>/dev/null); do
-      if [ -r "$DIR/package.mk" ]; then
-        # found first, set $PKG_DIR
+    FOUND=0
+    for DIR in $ROOT/`find $PACKAGES -type d -name $(echo $1| awk -F : '{print $1}') ! -wholename \*\/source\/\* 2>/dev/null` ; do
+      # keep track of dirs with meta for debugging
+      if [ -z "$ALL_DIRS" ] ; then
+        ALL_DIRS="$DIR"
+      else
+        ALL_DIRS="$ALL_DIRS\\n$DIR"
+      fi
+      if [ -f "$DIR/package.mk" ] ; then
+        FOUND=$((FOUND+1))
+        # found first. set $PKG_DIR
        PKG_DIR="$DIR"
-        # keep track of dirs with package.mk for detecting multiple folders
-        _ALL_DIRS="${_ALL_DIRS}${DIR}\\n"
-        _FOUND=$((_FOUND+1))
-        if [ $_FOUND -gt 1 ]; then
-          # _FOUND more ? fail
+        if [ $FOUND -gt 1 ] ; then
+          # found more ? fail
          echo "Error - multiple package folders:"
-          echo -e "$_ALL_DIRS"
+          echo -e "$ALL_DIRS"
          exit 1
        fi
      fi
    done
-
-    # then check packages folder if not found already
-    if [ $_FOUND -eq 0 ]; then
-      for DIR in $(find $ROOT/$PACKAGES -type d -name $_PKG_ROOT_NAME 2>/dev/null); do
-        if [ -r "$DIR/package.mk" ]; then
-          # found first, set $PKG_DIR
-          PKG_DIR="$DIR"
-          # keep track of dirs with package.mk for detecting multiple folders
-          _ALL_DIRS="${_ALL_DIRS}${DIR}\\n"
-          _FOUND=$((_FOUND+1))
-          if [ $_FOUND -gt 1 ]; then
-            # found more ? fail
-            echo "Error - multiple package folders:"
-            echo -e "$_ALL_DIRS"
-            exit 1
-          fi
-        fi
-      done
-    fi
  fi

  if [ -r $PKG_DIR/package.mk ]; then
@@ -132,8 +108,6 @@ SSL_CERTIFICATES="/etc/pki/tls"
 TOOLCHAIN_LANGUAGES=c
 [ "$TOOLCHAIN_CXX" = yes ] && TOOLCHAIN_LANGUAGES=${TOOLCHAIN_LANGUAGES},c++

-unset TARGET_CPP
-
 TARGET_CC=${TARGET_PREFIX}gcc
 TARGET_CXX=${TARGET_PREFIX}g++
 TARGET_LD=${TARGET_PREFIX}ld
@@ -151,8 +125,6 @@ TARGET_PKG_CONFIG_PATH=""
 TARGET_PKG_CONFIG_LIBDIR="$SYSROOT_PREFIX/usr/lib/pkgconfig:$SYSROOT_PREFIX/usr/share/pkgconfig"
 TARGET_PKG_CONFIG_SYSROOT_DIR="$SYSROOT_PREFIX"

-unset HOST_CPP
-
 HOST_AWK=gawk
 HOST_CC=$ROOT/$TOOLCHAIN/bin/host-gcc
 HOST_CXX=$ROOT/$TOOLCHAIN/bin/host-g++
@@ -2,8 +2,8 @@
  OPENELEC_VERSION="devel"

 # OS_VERSION: OS Version
-  OS_VERSION="5.0"
+  OS_VERSION="4.0"

 # ADDON_VERSION: Addon version
-  ADDON_VERSION="4.3"
+  ADDON_VERSION="4.1"

@@ -1,338 +0,0 @@
-# Name of the Distro to build (full name, without special characters)
-  DISTRONAME="Lakka"
-
-# short project description
-  DESCRIPTION="The DIY retro emulation console"
-
-# Welcome Message for e.g. SSH Server (up to 5 Lines)
-  GREETING0="###########################################"
-  GREETING1="# Lakka - The DIY retro emulation console #"
-  GREETING2="# ...... visit http://www.lakka.tv ...... #"
-  GREETING3="###########################################"
-  GREETING4=""
-
-# Root password to integrate in the target system
-  ROOT_PASSWORD="root"
-
-# Mediacenter to use (kodi / no)
-  MEDIACENTER="no"
-
-# Skins to install (Confluence)
-# Space separated list is supported,
-# e.g. SKINS="Confluence"
-  SKINS="Confluence"
-
-# Default Skin (Confluence)
-  SKIN_DEFAULT="Confluence"
-
-# install extra subtitle Fonts for KODI (yes / no)
-  KODI_EXTRA_FONTS="yes"
-
-# build and install 'RSXS' Screensaver (yes / no)
-  KODI_SCR_RSXS="yes"
-
-# build and install 'ProjectM' Visualization (yes / no)
-  KODI_VIS_PROJECTM="yes"
-
-# build and install 'GOOM' Visualization (yes / no)
-  KODI_VIS_GOOM="yes"
-
-# build and install 'Waveform' Visualization (yes / no)
-  KODI_VIS_WAVEFORM="yes"
-
-# build and install 'Spectrum' Visualization (yes / no)
-  KODI_VIS_SPECTRUM="yes"
-
-# build and install 'FishBMC' Visualization (yes / no)
-  # does not work on RPi
-  KODI_VIS_FISHBMC="yes"
-
-# build and install PulseAudio support (yes / no)
-  PULSEAUDIO_SUPPORT="no"
-
-# build and install espeak support (yes / no)
-  ESPEAK_SUPPORT="yes"
-
-# build and install with non-free support
-# (RAR compression support in KODI) (yes / no)
-  KODI_NONFREE_SUPPORT="yes"
-
-# build and install with BluRay support (yes / no)
-  KODI_BLURAY_SUPPORT="yes"
-
-# build and install with BD+ support
-# (BD+ decryption support in KODI) (yes / no)
-  BLURAY_BDPLUS_SUPPORT="yes"
-
-# build and install with AACS support
-# (BD decryption support in KODI) (yes / no)
-  BLURAY_AACS_SUPPORT="yes"
-
-# build and install with DVDCSS support
-# (DVD decryption support in KODI) (yes / no)
-  KODI_DVDCSS_SUPPORT="yes"
-
-# additional drivers to install:
-# for a list of additinoal drivers see packages/linux-drivers
-# Space separated list is supported,
-# e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"
-  ADDITIONAL_DRIVERS="RTL8192CU RTL8192DU RTL8192EU RTL8188EU RTL8812AU"
-
-# build and install bluetooth support (yes / no)
-  BLUETOOTH_SUPPORT="yes"
-
-# build and install with KODI webfrontend (yes / no)
-  KODI_WEBSERVER_SUPPORT="yes"
-
-# build and install Avahi (Zeroconf) daemon (yes / no)
-  AVAHI_DAEMON="yes"
-
-# build with UPnP support (yes / no)
-  KODI_UPNP_SUPPORT="yes"
-
-# build with MySQL support (yes / no)
-  KODI_MYSQL_SUPPORT="yes"
-
-# build xbmc with sshlib support (yes / no)
-  KODI_SSHLIB_SUPPORT="yes"
-
-# build xbmc with optical drive support (yes / no)
-  KODI_OPTICAL_SUPPORT="yes"
-
-# KODI Audio encoders for usage with optical drive support
-# Space separated list is supported,
-# e.g. KODI_AUDIOENCODER_ADDONS="ENCODER1 ENCODER2"
-  KODI_AUDIOENCODER_ADDONS="flac lame vorbis wav"
-
-# build with AirPlay support (stream videos from iDevices to KODI) (yes / no)
-  KODI_AIRPLAY_SUPPORT="yes"
-
-# build with AirTunes support (stream music from iDevices to KODI) (yes / no)
-  KODI_AIRTUNES_SUPPORT="yes"
-
-# build with libnfs support (mounting nfs shares with KODI) (yes / no)
-  KODI_NFS_SUPPORT="yes"
-
-# build with afpfs-ng support (mounting AFP shares with KODI) (yes / no)
-  KODI_AFP_SUPPORT="no"
-
-# build with Samba Client support (mounting SAMBA shares with KODI) (yes / no)
-  KODI_SAMBA_SUPPORT="yes"
-
-# build with NFS support (mounting nfs shares via the OS) (yes / no)
-  NFS_SUPPORT="yes"
-
-# build with Samba Client support (mounting samba shares via the OS) (yes / no)
-  SAMBA_SUPPORT="yes"
-
-# build and install Samba Server (yes / no)
-  SAMBA_SERVER="yes"
-
-# build and install SFTP Server (yes / no)
-  SFTP_SERVER="yes"
-
-# build and install PPP support (yes / no)
-  PPTP_SUPPORT="yes"
-
-# build and install OpenVPN support (yes / no)
-  OPENVPN_SUPPORT="yes"
-
-# build and install diskmounter support (udevil)
-# this service provide auto mounting support for external drives in the
-# mediacenter also automount internally drives at boottime via udev (yes / no)
-  UDEVIL="yes"
-
-# build and install exFAT fuse support (yes / no)
-  EXFAT="yes"
-
-# build and install NTFS-3G fuse support (yes / no)
-  NTFS3G="yes"
-
-# build and install hfs filesystem utilities (yes / no)
-  HFSTOOLS="yes"
-
-# Windowmanager to use (ratpoison / fluxbox / none)
-  WINDOWMANAGER="none"
-
-# Xorg Graphic drivers to use (all / i915,i965,r200,r300,r600,nvidia,nouveau)
-# Space separated list is supported,
-# e.g. GRAPHIC_DRIVERS="i915 i965 r300 r600 radeonsi nvidia nouveau"
-  if [ "$TARGET_ARCH" = "i386" ]; then
-    # TODO: create Legacy build with OpenELEC-4.2
-    # install legacy drivers to i386 ARCH
-    GRAPHIC_DRIVERS="r200 r300 r600 i915 i965 nouveau"
-  elif [ "$TARGET_ARCH" = "x86_64" ]; then
-    GRAPHIC_DRIVERS="r300 r600 radeonsi i915 i965 nouveau"
-  fi
-
-# build and install remote support (yes / no)
-  REMOTE_SUPPORT="no"
-
-# build and install ATV IR remote support (yes / no)
-  ATVCLIENT_SUPPORT="no"
-
-# build and install IRServer IR/LCD support (yes / no)
-  IRSERVER_SUPPORT="no"
-
-# build and install Joystick support (yes / no)
-  JOYSTICK_SUPPORT="yes"
-
-# build and install CEC adapter support (yes / no)
-  CEC_SUPPORT="yes"
-
-# build and install iSCSI support - iscsistart (yes / no)
-  ISCSI_SUPPORT="yes"
-
-# LCD driver to Use - Possible drivers are ( Comma seperated:
-# bayrad,CFontz,CFontz633,CFontzPacket,curses,CwLnx,dm140,
-# ea65,EyeboxOne,g15,glcdlib,glk,hd44780,i2500vfd,
-# icp_a106,imon,imonlcd,IOWarrior,irman,irtrans,
-# joy,lb216,lcdm001,lcterm,lirc,lis,MD8800,mdm166a,
-# ms6931,mtc_s16209x,MtxOrb,mx5000,NoritakeVFD,
-# picolcd,pyramid,sed1330,sed1520,serialPOS,
-# serialVFD,shuttleVFD,sli,stv5730,SureElec,svga,vlsys_m428
-# 'all' compiles all drivers;
-# 'all,!xxx,!yyy' de-selects previously selected drivers
-# "none" for disable LCD support
-  LCD_DRIVER="irtrans,imon,imonlcd,mdm166a,MtxOrb,lis,dm140,hd44780,CFontz,SureElec,vlsys_m428,serialVFD,shuttleVFD"
-
-# Support for partitioning and formating disks in initramfs (yes / no)
-# This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
-  INITRAMFS_PARTED_SUPPORT="no"
-
-# build with swap support (yes / no)
-  SWAP_SUPPORT="no"
-
-# swap support enabled per default (yes / no)
-  SWAP_ENABLED_DEFAULT="no"
-
-# swapfile size if SWAP_SUPPORT=yes in MB
-  SWAPFILESIZE="256"
-
-# build with installer (yes / no)
-  INSTALLER_SUPPORT="yes"
-
-# Testpackages for development (yes / no)
-  TESTING="no"
-
-# OEM packages for OEM's (yes / no)
-  OEM_SUPPORT="yes"
-
-# build and install nano text editor (yes / no)
-  NANO_EDITOR="yes"
-
-# cron support (yes / no)
-  CRON_SUPPORT="yes"
-
-# Perf support in development builds (yes / no)
-  PERF_SUPPORT="yes"
-
-# Distribution Specific source location
-  DISTRO_MIRROR="http://sources.openelec.tv/mirror"
-  DISTRO_SRC="http://sources.openelec.tv/$OPENELEC_VERSION"
-
-# Addon Server Url
-  ADDON_SERVER_URL="http://addons.openelec.tv"
-
-# set the addon dirs
-  ADDON_PATH="$ADDON_VERSION/$PROJECT/$TARGET_ARCH"
-  ADDON_URL="$ADDON_SERVER_URL/$ADDON_PATH"
-
-  LAKKA_MIRROR="http://sources.lakka.tv"
-  RA_PLAYLIST_NAMES=""\
-"Atari - 2600.lpl;"\
-"Atari - 5200.lpl;"\
-"Atari - 7800.lpl;"\
-"Atari - Jaguar.lpl;"\
-"Atari - Lynx.lpl;"\
-"Atari - ST.lpl;"\
-"Bandai - WonderSwan Color.lpl;"\
-"Bandai - WonderSwan.lpl;"\
-"Cave Story.lpl;"\
-"Coleco - ColecoVision.lpl;"\
-"DOOM.lpl;"\
-"FB Alpha - Arcade Games.lpl;"\
-"GCE - Vectrex.lpl;"\
-"Lutro.lpl;"\
-"Magnavox - Odyssey2.lpl;"\
-"MAME.lpl;"\
-"Microsoft - MSX2.lpl;"\
-"Microsoft - MSX.lpl;"\
-"NEC - PC Engine SuperGrafx.lpl;"\
-"NEC - PC Engine - TurboGrafx 16.lpl;"\
-"Nintendo - Famicom Disk System.lpl;"\
-"Nintendo - Game Boy Advance (e-Cards).lpl;"\
-"Nintendo - Game Boy Advance.lpl;"\
-"Nintendo - Game Boy Color.lpl;"\
-"Nintendo - Game Boy.lpl;"\
-"Nintendo - Nintendo 64.lpl;"\
-"Nintendo - Nintendo DS Decrypted.lpl;"\
-"Nintendo - Nintendo DS (Download Play) (BETA).lpl;"\
-"Nintendo - Nintendo DSi Decrypted.lpl;"\
-"Nintendo - Nintendo DSi (DLC).lpl;"\
-"Nintendo - Nintendo Entertainment System.lpl;"\
-"Nintendo - Satellaview.lpl;"\
-"Nintendo - Super Nintendo Entertainment System.lpl;"\
-"Nintendo - Virtual Boy.lpl;"\
-"Quake1.lpl;"\
-"ScummVM.lpl;"\
-"Sega - 32X.lpl;"\
-"Sega - Game Gear.lpl;"\
-"Sega - Master System - Mark III.lpl;"\
-"Sega - Mega Drive - Genesis.lpl;"\
-"Sega - PICO.lpl;"\
-"Sega - SG-1000.lpl;"\
-"Sinclair - ZX Spectrum +3.lpl;"\
-"SNK - Neo Geo Pocket Color.lpl;"\
-"SNK - Neo Geo Pocket.lpl;"\
-"Sony - PlayStation Portable.lpl;"\
-"Sony - PlayStation.lpl"
-
-  RA_PLAYLIST_CORES=""\
-"/tmp/cores/stella_libretro.so;"\
-"DETECT;"\
-"/tmp/cores/prosystem_libretro.so;"\
-"/tmp/cores/virtualjaguar_libretro.so;"\
-"/tmp/cores/handy_libretro.so;"\
-"/tmp/cores/hatari_libretro.so;"\
-"/tmp/cores/mednafen_wswan_libretro.so;"\
-"/tmp/cores/mednafen_wswan_libretro.so;"\
-"/tmp/cores/nxengine_libretro.so;"\
-"/tmp/cores/bluemsx_libretro.so;"\
-"/tmp/cores/prboom_libretro.so;"\
-"/tmp/cores/fbalpha_libretro.so;"\
-"/tmp/cores/vecx_libretro.so;"\
-"/tmp/cores/lutro_libretro.so;"\
-"/tmp/cores/o2em_libretro.so;"\
-"/tmp/cores/mame_libretro.so;"\
-"/tmp/cores/bluemsx_libretro.so;"\
-"/tmp/cores/bluemsx_libretro.so;"\
-"/tmp/cores/mednafen_supergrafx_libretro.so;"\
-"/tmp/cores/mednafen_pce_fast_libretro.so;"\
-"/tmp/cores/nestopia_libretro.so;"\
-"/tmp/cores/mgba_libretro.so;"\
-"/tmp/cores/mgba_libretro.so;"\
-"/tmp/cores/gambatte_libretro.so;"\
-"/tmp/cores/gambatte_libretro.so;"\
-"/tmp/cores/mupen64plus_libretro.so;"\
-"/tmp/cores/desmume_libretro.so;"\
-"/tmp/cores/desmume_libretro.so;"\
-"/tmp/cores/desmume_libretro.so;"\
-"/tmp/cores/desmume_libretro.so;"\
-"/tmp/cores/nestopia_libretro.so;"\
-"/tmp/cores/snes9x2010_libretro.so;"\
-"/tmp/cores/snes9x2010_libretro.so;"\
-"/tmp/cores/mednafen_vb_libretro.so;"\
-"/tmp/cores/tyrquake_libretro.so;"\
-"/tmp/cores/scummvm_libretro.so;"\
-"/tmp/cores/picodrive_libretro.so;"\
-"/tmp/cores/genesis_plus_gx_libretro.so;"\
-"/tmp/cores/genesis_plus_gx_libretro.so;"\
-"/tmp/cores/genesis_plus_gx_libretro.so;"\
-"/tmp/cores/picodrive_libretro.so;"\
-"/tmp/cores/genesis_plus_gx_libretro.so;"\
-"/tmp/cores/fuse_libretro.so;"\
-"/tmp/cores/mednafen_ngp_libretro.so;"\
-"/tmp/cores/mednafen_ngp_libretro.so;"\
-"/tmp/cores/ppsspp_libretro.so;"\
-"/tmp/cores/pcsx_rearmed_libretro.so"
@@ -1,224 +0,0 @@
-# Name of the Distro to build (full name, without special characters)
-  DISTRONAME="OpenELEC"
-
-# short project description
-  DESCRIPTION="OpenELEC is a fast and userfriendly Kodi Entertainment Center distribution."
-
-# Welcome Message for e.g. SSH Server (up to 5 Lines)
-  GREETING0="##############################################"
-  GREETING1="# OpenELEC - The living room PC for everyone #"
-  GREETING2="# ...... visit http://www.openelec.tv ...... #"
-  GREETING3="##############################################"
-  GREETING4=""
-
-# Root password to integrate in the target system
-  ROOT_PASSWORD="openelec"
-
-# Mediacenter to use (kodi / no)
-  MEDIACENTER="kodi"
-
-# Skins to install (Confluence)
-# Space separated list is supported,
-# e.g. SKINS="Confluence"
-  SKINS="Confluence"
-
-# Default Skin (Confluence)
-  SKIN_DEFAULT="Confluence"
-
-# install extra subtitle Fonts for KODI (yes / no)
-  KODI_EXTRA_FONTS="yes"
-
-# build and install 'RSXS' Screensaver (yes / no)
-  KODI_SCR_RSXS="yes"
-
-# build and install 'ProjectM' Visualization (yes / no)
-  KODI_VIS_PROJECTM="yes"
-
-# build and install 'GOOM' Visualization (yes / no)
-  KODI_VIS_GOOM="yes"
-
-# build and install 'Waveform' Visualization (yes / no)
-  KODI_VIS_WAVEFORM="yes"
-
-# build and install 'Spectrum' Visualization (yes / no)
-  KODI_VIS_SPECTRUM="yes"
-
-# build and install 'FishBMC' Visualization (yes / no)
-  # does not work on RPi
-  KODI_VIS_FISHBMC="yes"
-
-# build and install espeak support (yes / no)
-  ESPEAK_SUPPORT="yes"
-
-# build and install with non-free support
-# (RAR compression support in KODI) (yes / no)
-  KODI_NONFREE_SUPPORT="yes"
-
-# build and install with BluRay support (yes / no)
-  KODI_BLURAY_SUPPORT="yes"
-
-# build and install with BD+ support
-# (BD+ decryption support in KODI) (yes / no)
-  BLURAY_BDPLUS_SUPPORT="yes"
-
-# build and install with AACS support
-# (BD decryption support in KODI) (yes / no)
-  BLURAY_AACS_SUPPORT="yes"
-
-# build and install with DVDCSS support
-# (DVD decryption support in KODI) (yes / no)
-  KODI_DVDCSS_SUPPORT="yes"
-
-# additional drivers to install:
-# for a list of additinoal drivers see packages/linux-drivers
-# Space separated list is supported,
-# e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"
-  ADDITIONAL_DRIVERS="RTL8192CU RTL8192DU RTL8188EU RTL8812AU dvbhdhomerun"
-
-# build and install bluetooth support (yes / no)
-  BLUETOOTH_SUPPORT="yes"
-
-# build and install with KODI webfrontend (yes / no)
-  KODI_WEBSERVER_SUPPORT="yes"
-
-# build and install Avahi (Zeroconf) daemon (yes / no)
-  AVAHI_DAEMON="yes"
-
-# build with UPnP support (yes / no)
-  KODI_UPNP_SUPPORT="yes"
-
-# build with MySQL support (yes / no)
-  KODI_MYSQL_SUPPORT="yes"
-
-# build xbmc with sshlib support (yes / no)
-  KODI_SSHLIB_SUPPORT="yes"
-
-# build xbmc with optical drive support (yes / no)
-  KODI_OPTICAL_SUPPORT="yes"
-
-# KODI Audio encoders for usage with optical drive support
-# Space separated list is supported,
-# e.g. KODI_AUDIOENCODER_ADDONS="ENCODER1 ENCODER2"
-  KODI_AUDIOENCODER_ADDONS="flac lame vorbis wav"
-
-# build with AirPlay support (stream videos from iDevices to KODI) (yes / no)
-  KODI_AIRPLAY_SUPPORT="yes"
-
-# build with AirTunes support (stream music from iDevices to KODI) (yes / no)
-  KODI_AIRTUNES_SUPPORT="yes"
-
-# build with libnfs support (mounting nfs shares with KODI) (yes / no)
-  KODI_NFS_SUPPORT="yes"
-
-# build with Samba Client support (mounting SAMBA shares with KODI) (yes / no)
-  KODI_SAMBA_SUPPORT="yes"
-
-# build with NFS support (mounting nfs shares via the OS) (yes / no)
-  NFS_SUPPORT="yes"
-
-# build with Samba Client support (mounting samba shares via the OS) (yes / no)
-  SAMBA_SUPPORT="yes"
-
-# build and install Samba Server (yes / no)
-  SAMBA_SERVER="yes"
-
-# build and install SFTP Server (yes / no)
-  SFTP_SERVER="yes"
-
-# build and install diskmounter support (udevil)
-# this service provide auto mounting support for external drives in the
-# mediacenter also automount internally drives at boottime via udev (yes / no)
-  UDEVIL="yes"
-
-# build and install exFAT fuse support (yes / no)
-  EXFAT="yes"
-
-# build and install NTFS-3G fuse support (yes / no)
-  NTFS3G="yes"
-
-# build and install hfs filesystem utilities (yes / no)
-  HFSTOOLS="yes"
-
-# Windowmanager to use (ratpoison / fluxbox / none)
-  WINDOWMANAGER="fluxbox"
-
-# Xorg Graphic drivers to use (all / i915,i965,r200,r300,r600,nvidia,nouveau)
-# Space separated list is supported,
-# e.g. GRAPHIC_DRIVERS="i915 i965 r300 r600 radeonsi nvidia nouveau"
-  if [ "$TARGET_ARCH" = "i386" ]; then
-    # TODO: create Legacy build with OpenELEC-4.2
-    # install legacy drivers to i386 ARCH
-    GRAPHIC_DRIVERS="r200 r300 r600 i915 i965 nvidia-legacy"
-  elif [ "$TARGET_ARCH" = "x86_64" ]; then
-    GRAPHIC_DRIVERS="r300 r600 radeonsi i915 i965 nvidia"
-  fi
-
-# build and install remote support (yes / no)
-  REMOTE_SUPPORT="yes"
-
-# build and install ATV IR remote support (yes / no)
-  ATVCLIENT_SUPPORT="yes"
-
-# build and install IRServer IR/LCD support (yes / no)
-  IRSERVER_SUPPORT="yes"
-
-# build and install Joystick support (yes / no)
-  JOYSTICK_SUPPORT="yes"
-
-# build and install CEC adapter support (yes / no)
-  CEC_SUPPORT="yes"
-
-# build and install iSCSI support - iscsistart (yes / no)
-  ISCSI_SUPPORT="yes"
-
-# LCD driver to Use - Possible drivers are ( Comma seperated:
-# bayrad,CFontz,CFontz633,CFontzPacket,curses,CwLnx,dm140,
-# ea65,EyeboxOne,g15,glcdlib,glk,hd44780,i2500vfd,
-# icp_a106,imon,imonlcd,IOWarrior,irman,irtrans,
-# joy,lb216,lcdm001,lcterm,lirc,lis,MD8800,mdm166a,
-# ms6931,mtc_s16209x,MtxOrb,mx5000,NoritakeVFD,
-# picolcd,pyramid,sed1330,sed1520,serialPOS,
-# serialVFD,shuttleVFD,sli,stv5730,SureElec,svga,vlsys_m428
-# 'all' compiles all drivers;
-# 'all,!xxx,!yyy' de-selects previously selected drivers
-# "none" for disable LCD support
-  LCD_DRIVER="irtrans,imon,imonlcd,mdm166a,MtxOrb,lis,dm140,hd44780,CFontz,SureElec,vlsys_m428,serialVFD,shuttleVFD"
-
-# Support for partitioning and formating disks in initramfs (yes / no)
-# This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
-  INITRAMFS_PARTED_SUPPORT="no"
-
-# build with swap support (yes / no)
-  SWAP_SUPPORT="no"
-
-# swap support enabled per default (yes / no)
-  SWAP_ENABLED_DEFAULT="no"
-
-# swapfile size if SWAP_SUPPORT=yes in MB
-  SWAPFILESIZE="256"
-
-# build with installer (yes / no)
-  INSTALLER_SUPPORT="yes"
-
-# Testpackages for development (yes / no)
-  TESTING="no"
-
-# OEM packages for OEM's (yes / no)
-  OEM_SUPPORT="no"
-
-# build and install nano text editor (yes / no)
-  NANO_EDITOR="yes"
-
-# cron support (yes / no)
-  CRON_SUPPORT="yes"
-
-# Distribution Specific source location
-  DISTRO_MIRROR="http://sources.openelec.tv/mirror"
-  DISTRO_SRC="http://sources.openelec.tv/$OPENELEC_VERSION"
-
-# Addon Server Url
-  ADDON_SERVER_URL="http://addons.openelec.tv"
-
-# set the addon dirs
-  ADDON_PATH="$ADDON_VERSION/$PROJECT/$TARGET_ARCH"
-  ADDON_URL="$ADDON_SERVER_URL/$ADDON_PATH"
@@ -1,619 +0,0 @@
-
-Unless otherwise explicitly stated, all code in Genesis Plus GX is released
-under the following license:
-
-Copyright (c) 1998-2003 Charles MacDonald
-Copyright (c) 2007-2015 Eke-Eke
-Some portions copyright Nicola Salmoria and the MAME team
-All rights reserved.
-
-Redistribution and use of this code or any derivative works are permitted
-provided that the following conditions are met:
-
-* Redistributions may not be sold, nor may they be used in a commercial
-product or activity.
-
-* Redistributions that are modified from the original source must include the
-complete source code, including the source code for all components used by a
-binary built from the modified sources. However, as a special exception, the
-source code distributed need not include anything that is normally distributed
-(in either source or binary form) with the major components (compiler, kernel,
-and so on) of the operating system on which the executable runs, unless that
-component itself accompanies the executable.
-
-* Redistributions must reproduce the above copyright notice, this list of
-conditions and the following disclaimer in the documentation and/or other
-materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-
----------------------------------------------------------------------------------------
-
-TREMOR library is distributed under the following license:
-
-Copyright (c) 2002, Xiph.org Foundation
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
- Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-
- Redistributions in binary form must reproduce the above copyright
-notice, this list of conditions and the following disclaimer in the
-documentation and/or other materials provided with the distribution.
-
- Neither the name of the Xiph.org Foundation nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION
-OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
----------------------------------------------------------------------------------------
-
-
-NTSC Filter and Blip Buffer libraries are distributed under the 
-terms of the GNU Lesser General Public License (LGPL)
-
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!
-
-
----------------------------------------------------------------------------------------
-
-Gamecube & Wii ports are linked with LIBASND library and includes code distributed under
-the following license:
-
-Copyright (c) 2008 Hermes <www.entuwii.net>
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are 
-permitted provided that the following conditions are met:
-
- Redistributions of source code must retain the above copyright notice, this list of 
-  conditions and the following disclaimer. 
- Redistributions in binary form must reproduce the above copyright notice, this list 
-  of conditions and the following disclaimer in the documentation and/or other 
-  materials provided with the distribution. 
- The names of the contributors may not be used to endorse or promote products derived 
-  from this software without specific prior written permission. 
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY 
-EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
-THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
-PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
-THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
----------------------------------------------------------------------------------------
-
-
-
@@ -1,30 +0,0 @@
-
- Redistribution and use of this code or any derivative works are permitted
- provided that the following conditions are met:
-
- * Redistributions may not be sold, nor may they be used in a commercial
- product or activity.
-
- * Redistributions that are modified from the original source must include the
- complete source code, including the source code for all components used by a
- binary built from the modified sources. However, as a special exception, the
- source code distributed need not include anything that is normally distributed
- (in either source or binary form) with the major components (compiler, kernel,
- and so on) of the operating system on which the executable runs, unless that
- component itself accompanies the executable.
-
- * Redistributions must reproduce the above copyright notice, this list of
- conditions and the following disclaimer in the documentation and/or other
- materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
@@ -1,174 +0,0 @@
-  Snes9x - Portable Super Nintendo Entertainment System (TM) emulator.
-
-  (c) Copyright 1996 - 2002  Gary Henderson ([email protected]),
-                             Jerremy Koot ([email protected])
-
-  (c) Copyright 2002 - 2004  Matthew Kendora
-
-  (c) Copyright 2002 - 2005  Peter Bortas ([email protected])
-
-  (c) Copyright 2004 - 2005  Joel Yliluoma (http://iki.fi/bisqwit/)
-
-  (c) Copyright 2001 - 2006  John Weidman ([email protected])
-
-  (c) Copyright 2002 - 2006  funkyass ([email protected]),
-                             Kris Bleakley ([email protected])
-
-  (c) Copyright 2002 - 2010  Brad Jorsch ([email protected]),
-                             Nach ([email protected]),
-
-  (c) Copyright 2002 - 2011  zones ([email protected])
-
-  (c) Copyright 2006 - 2007  nitsuja
-
-  (c) Copyright 2009 - 2016  BearOso,
-                             OV2
-
-
-  BS-X C emulator code
-  (c) Copyright 2005 - 2006  Dreamer Nom,
-                             zones
-
-  C4 x86 assembler and some C emulation code
-  (c) Copyright 2000 - 2003  _Demo_ ([email protected]),
-                             Nach,
-                             zsKnight ([email protected])
-
-  C4 C++ code
-  (c) Copyright 2003 - 2006  Brad Jorsch,
-                             Nach
-
-  DSP-1 emulator code
-  (c) Copyright 1998 - 2006  _Demo_,
-                             Andreas Naive ([email protected]),
-                             Gary Henderson,
-                             Ivar ([email protected]),
-                             John Weidman,
-                             Kris Bleakley,
-                             Matthew Kendora,
-                             Nach,
-                             neviksti ([email protected])
-
-  DSP-2 emulator code
-  (c) Copyright 2003         John Weidman,
-                             Kris Bleakley,
-                             Lord Nightmare ([email protected]),
-                             Matthew Kendora,
-                             neviksti
-
-  DSP-3 emulator code
-  (c) Copyright 2003 - 2006  John Weidman,
-                             Kris Bleakley,
-                             Lancer,
-                             z80 gaiden
-
-  DSP-4 emulator code
-  (c) Copyright 2004 - 2006  Dreamer Nom,
-                             John Weidman,
-                             Kris Bleakley,
-                             Nach,
-                             z80 gaiden
-
-  OBC1 emulator code
-  (c) Copyright 2001 - 2004  zsKnight,
-                             pagefault ([email protected]),
-                             Kris Bleakley
-                             Ported from x86 assembler to C by sanmaiwashi
-
-  SPC7110 and RTC C++ emulator code used in 1.39-1.51
-  (c) Copyright 2002         Matthew Kendora with research by
-                             zsKnight,
-                             John Weidman,
-                             Dark Force
-
-  SPC7110 and RTC C++ emulator code used in 1.52+
-  (c) Copyright 2009         byuu,
-                             neviksti
-
-  S-DD1 C emulator code
-  (c) Copyright 2003         Brad Jorsch with research by
-                             Andreas Naive,
-                             John Weidman
-
-  S-RTC C emulator code
-  (c) Copyright 2001 - 2006  byuu,
-                             John Weidman
-
-  ST010 C++ emulator code
-  (c) Copyright 2003         Feather,
-                             John Weidman,
-                             Kris Bleakley,
-                             Matthew Kendora
-
-  Super FX x86 assembler emulator code
-  (c) Copyright 1998 - 2003  _Demo_,
-                             pagefault,
-                             zsKnight
-
-  Super FX C emulator code
-  (c) Copyright 1997 - 1999  Ivar,
-                             Gary Henderson,
-                             John Weidman
-
-  Sound emulator code used in 1.5-1.51
-  (c) Copyright 1998 - 2003  Brad Martin
-  (c) Copyright 1998 - 2006  Charles Bilyue'
-
-  Sound emulator code used in 1.52+
-  (c) Copyright 2004 - 2007  Shay Green ([email protected])
-
-  SH assembler code partly based on x86 assembler code
-  (c) Copyright 2002 - 2004  Marcus Comstedt ([email protected])
-
-  2xSaI filter
-  (c) Copyright 1999 - 2001  Derek Liauw Kie Fa
-
-  HQ2x, HQ3x, HQ4x filters
-  (c) Copyright 2003         Maxim Stepin ([email protected])
-
-  NTSC filter
-  (c) Copyright 2006 - 2007  Shay Green
-
-  GTK+ GUI code
-  (c) Copyright 2004 - 2016  BearOso
-
-  Win32 GUI code
-  (c) Copyright 2003 - 2006  blip,
-                             funkyass,
-                             Matthew Kendora,
-                             Nach,
-                             nitsuja
-  (c) Copyright 2009 - 2011  OV2
-
-  Mac OS GUI code
-  (c) Copyright 1998 - 2001  John Stiles
-  (c) Copyright 2001 - 2011  zones
-
-
-  Specific ports contains the works of other authors. See headers in
-  individual files.
-
-
-  Snes9x homepage: http://www.snes9x.com/
-
-  Permission to use, copy, modify and/or distribute Snes9x in both binary
-  and source form, for non-commercial purposes, is hereby granted without
-  fee, providing that this license information and copyright notice appear
-  with all copies and any derived work.
-
-  This software is provided 'as-is', without any express or implied
-  warranty. In no event shall the authors be held liable for any damages
-  arising from the use of this software or it's derivatives.
-
-  Snes9x is freeware for PERSONAL USE only. Commercial users should
-  seek permission of the copyright holders first. Commercial use includes,
-  but is not limited to, charging money for Snes9x or software derived from
-  Snes9x, including Snes9x or derivatives in commercial game bundles, and/or
-  using Snes9x as a promotion for your commercial product.
-
-  The copyright holders request that bug fixes and improvements to the code
-  should be forwarded to them so everyone can benefit from the modifications
-  in future versions.
-
-  Super NES and Super Nintendo Entertainment System are trademarks of
-  Nintendo Co., Limited and its subsidiary companies.
@@ -1,74 +0,0 @@
-#!/bin/bash
-
-rm -rf target/
-
->&2 echo "Generic.x86_64"
-DISTRO=Lakka PROJECT=Generic ARCH=x86_64 make image -j9
->&2 echo "Generic.i386"
-DISTRO=Lakka PROJECT=Generic ARCH=i386 make image -j9
->&2 echo "Generic.x86_64 UEFI"
-DISTRO=Lakka PROJECT=Generic ARCH=x86_64 UEFI="yes" make image -j9
->&2 echo "Generic.i386 UEFI"
-DISTRO=Lakka PROJECT=Generic ARCH=i386 UEFI="yes" make image -j9
->&2 echo "RPi.arm"
-DISTRO=Lakka PROJECT=RPi ARCH=arm make image -j9
->&2 echo "RPi.arm noobs"
-DISTRO=Lakka PROJECT=RPi ARCH=arm make noobs -j9
->&2 echo "RPi2.arm"
-DISTRO=Lakka PROJECT=RPi2 ARCH=arm make image -j9
->&2 echo "RPi2.arm noobs"
-DISTRO=Lakka PROJECT=RPi2 ARCH=arm make noobs -j9
->&2 echo "imx6.cuboxi.arm"
-DISTRO=Lakka PROJECT=imx6 SYSTEM=cuboxi ARCH=arm make image -j9
->&2 echo "imx6.udoo.arm"
-DISTRO=Lakka PROJECT=imx6 SYSTEM=udoo ARCH=arm make image -j9
->&2 echo "a20.arm"
-DISTRO=Lakka PROJECT=a20 ARCH=arm make image -j9
->&2 echo "a10.arm"
-DISTRO=Lakka PROJECT=a10 ARCH=arm make image -j9
->&2 echo "Bananapi.arm"
-DISTRO=Lakka PROJECT=Bananapi ARCH=arm make image -j9
->&2 echo "OdroidC1.arm"
-DISTRO=Lakka PROJECT=OdroidC1 ARCH=arm make image -j9
->&2 echo "OdroidXU3.arm"
-DISTRO=Lakka PROJECT=OdroidXU3 ARCH=arm make image -j9
->&2 echo "WeTek_Play.arm"
-DISTRO=Lakka PROJECT=WeTek_Play ARCH=arm make image -j9
->&2 echo "WeTek_Core.arm"
-DISTRO=Lakka PROJECT=WeTek_Core ARCH=arm make image -j9
->&2 echo "H3.op2.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=opi2 ARCH=arm make image -j9
->&2 echo "H3.opipc.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=opipc ARCH=arm make image -j9
->&2 echo "H3.opiplus.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=opiplus ARCH=arm make image -j9
->&2 echo "H3.opione.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=opione ARCH=arm make image -j9
->&2 echo "H3.opilite.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=opilite ARCH=arm make image -j9
->&2 echo "H3.bpim2p.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=bpim2p ARCH=arm make image -j9
->&2 echo "H3.opiplus2e.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=opiplus2e ARCH=arm make image -j9
->&2 echo "H3.opipcplus.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=opipcplus ARCH=arm make image -j9
->&2 echo "H3.bpim3.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=bpim3 ARCH=arm make image -j9
->&2 echo "H3.bx2.arm"
-DISTRO=Lakka PROJECT=H3 SYSTEM=bx2 ARCH=arm make image -j9
-
-rm target/*.kernel
-rm target/*.system
-
-for f in target/*; do
-  md5sum $f > $f.md5
-  sha256sum $f > $f.sha256
-done
-
-for f in target/*; do
-  dir=`echo $f | sed -e 's/target\/Lakka-\(.*\)-devel-\(.*\)/\1/'`
-  mkdir -p target/$dir
-  mv $f target/$dir/
-done
-
-#scp -r target/* [email protected]:sources/nightly/
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="cxxtools"
-PKG_VERSION="2.2.1"
+PKG_VERSION="2.2"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL-2"
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="libzip"
-PKG_VERSION="1.1.3"
+PKG_VERSION="0.11.2"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -22,7 +22,7 @@ PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.vdr-wiki.de/wiki/index.php/Dummydevice-plugin"
-PKG_URL="$DISTRO_MIRROR/$PKG_NAME/$PKG_NAME-$PKG_VERSION.tgz"
+PKG_URL="http://phivdr.dyndns.org/vdr/$PKG_NAME/$PKG_NAME-$PKG_VERSION.tgz"
 PKG_SOURCE_DIR="dummydevice-${PKG_VERSION}"
 PKG_DEPENDS_TARGET="toolchain vdr"
 PKG_PRIORITY="optional"
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="vdr-iptv"
-PKG_VERSION="2.2.0"
+PKG_VERSION="2.1.3"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -17,13 +17,13 @@
 ################################################################################

 PKG_NAME="vdr-plugin-dvbapi"
-PKG_VERSION="c0c7fa2"
+PKG_VERSION="bdcad3f"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="https://github.com/manio/vdr-plugin-dvbapi"
 PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
-PKG_DEPENDS_TARGET="toolchain vdr libdvbcsa"
+PKG_DEPENDS_TARGET="toolchain vdr openssl libdvbcsa"
 PKG_PRIORITY="optional"
 PKG_SECTION="multimedia"
 PKG_SHORTDESC="TV"
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="vdr-plugin-eepg"
-PKG_VERSION="9cd9a75"
+PKG_VERSION="d7dc614"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -17,13 +17,13 @@
 ################################################################################

 PKG_NAME="vdr-plugin-streamdev"
-PKG_VERSION="84c6f6b"
+PKG_VERSION="40704cd"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://projects.vdr-developer.org/projects/show/plg-streamdev"
 PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
-PKG_DEPENDS_TARGET="toolchain vdr libressl"
+PKG_DEPENDS_TARGET="toolchain vdr openssl"
 PKG_PRIORITY="optional"
 PKG_SECTION="multimedia"
 PKG_SHORTDESC="TV"
@@ -17,11 +17,11 @@
 ################################################################################

 PKG_NAME="vdr-plugin-vnsiserver"
-PKG_VERSION="9529e6d"
+PKG_VERSION="7d4aa81"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
-PKG_SITE="https://github.com/FernetMenta/vdr-plugin-vnsiserver"
+PKG_SITE="https://github.com/opdenkamp/xbmc-pvr-addons/tree/master/addons/pvr.vdr.vnsi/vdr-plugin-vnsiserver"
 PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
 PKG_DEPENDS_TARGET="toolchain vdr"
 PKG_PRIORITY="optional"
@@ -30,6 +30,7 @@ PKG_SHORTDESC="TV"
 PKG_LONGDESC="TV"

 PKG_IS_ADDON="no"
+
 PKG_AUTORECONF="no"

 pre_configure_target() {
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="vdr-plugin-xvdr"
-PKG_VERSION="b300fc3"
+PKG_VERSION="7f49bfa"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="vdr-satip"
-PKG_VERSION="2.2.0"
+PKG_VERSION="0.3.3"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="vdr-wirbelscan"
-PKG_VERSION="0.0.9"
+PKG_VERSION="0.0.7"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -0,0 +1,25 @@
+From f1923761486397809be88b3344d0c498afe1bf29 Mon Sep 17 00:00:00 2001
+From: Stefan Saraev <[email protected]>
+Date: Mon, 9 Jun 2014 22:02:58 +0300
+Subject: [PATCH] dont build i18n
+
+---
+ Makefile |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index 87d274e..b9f4b29 100644
+--- a/Makefile
+++ b/Makefile
+@@ -74,7 +74,7 @@ UNCRUSTIFY_FILES = scanner.c scanner.h scanfilter.c scanfilter.h statemachine.h
+ 
+ ### The main target:
+ 
+-all: libvdr-$(PLUGIN).so i18n
+all: libvdr-$(PLUGIN).so
+ 
+ ### Implicit rules:
+ 
+-- 
+1.7.2.5
+
@@ -0,0 +1,51 @@
+commit 64f969e39d18aefa263dc3a61172e33df33963fb
+Author: Stefan Saraev <[email protected]>
+Date:   Thu Mar 29 20:22:11 2012 +0300
+
+    wirbelscan: receiver-api-fixes
+
+diff --git a/statemachine.c b/statemachine.c
+index 48a212e..bc0c8e5 100644
+--- a/statemachine.c
+++ b/statemachine.c
+@@ -36,12 +36,12 @@ protected:
+     while (Running()) cCondWait::SleepMs(5);
+     }; /*TODO: check here periodically for lock and wether we got any data!*/
+ public:
+-  cScanReceiver(tChannelID ChannelID, int AnyPid);
+  cScanReceiver(const cChannel* chan, int AnyPid);
+   virtual ~cScanReceiver() {cReceiver::Detach(); };
+   };
+ 
+-cScanReceiver::cScanReceiver(tChannelID ChannelID, int AnyPid) :
+-     cReceiver(ChannelID, 99, AnyPid), cThread("dummy receiver") { }
+cScanReceiver::cScanReceiver(const cChannel* chan, int AnyPid) :
+     cReceiver(chan, 99), cThread("dummy receiver") {  AddPid(AnyPid); }
+ 
+ ///!-----------------------------------------------------------------
+ ///!  v 0.0.5, store state in lastState if different and print state
+@@ -144,7 +144,7 @@ void cStateMachine::Action(void) {
+          ScannedTransponders.Add(ScannedTransponder);
+ 
+          dev->SwitchChannel(Transponder, false);
+-         aReceiver = new cScanReceiver(Transponder->GetChannelID(), 99);
+         aReceiver = new cScanReceiver(Transponder, 99);
+          dev->AttachReceiver(aReceiver);
+ 
+          cCondWait::SleepMs(1000);
+diff --git a/ttext.c b/ttext.c
+index 0053936..0864484 100644
+--- a/ttext.c
+++ b/ttext.c
+@@ -374,9 +374,9 @@ void cSwReceiver::Action() {
+      }
+ }
+ 
+-cSwReceiver::cSwReceiver(cChannel * Channel) : cReceiver(Channel->GetChannelID(),
+-   100, Channel->Tpid()), cThread("ttext") {
+cSwReceiver::cSwReceiver(cChannel * Channel) : cReceiver(Channel, 100), cThread("ttext") {
+ 
+   AddPid(Channel->Tpid());
+    stopped = fuzzy = false;
+    channel = Channel;
+    buffer  = new cRingBufferLinear(MEGABYTE(1),184);
@@ -18,12 +18,12 @@
 ################################################################################

 PKG_NAME="vdr"
-PKG_VERSION="2.2.0"
+PKG_VERSION="2.1.6"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.tvdr.de"
-PKG_URL="ftp://ftp.tvdr.de/vdr/$PKG_NAME-$PKG_VERSION.tar.bz2"
+PKG_URL="ftp://ftp.tvdr.de/vdr/Developer/$PKG_NAME-$PKG_VERSION.tar.bz2"
 PKG_DEPENDS_TARGET="toolchain fontconfig freetype libcap libjpeg-turbo bzip2"
 PKG_PRIORITY="optional"
 PKG_SECTION="multimedia"
@@ -0,0 +1,12 @@
+diff -Nru vdr-1.7.15-vanilla/eitscan.c vdr-1.7.15-disable_eitscan/eitscan.c
+--- vdr-1.7.15-vanilla/eitscan.c	2010-06-06 19:11:14.000000000 +0300
+++ vdr-1.7.15-disable_eitscan/eitscan.c	2010-06-06 20:44:07.000000000 +0300
+@@ -146,7 +146,7 @@
+                if (Device) {
+                   for (cScanData *ScanData = scanList->First(); ScanData; ScanData = scanList->Next(ScanData)) {
+                       const cChannel *Channel = ScanData->GetChannel();
+-                      if (Channel) {
+                      if (Channel && !cSource::IsType(Channel->Source(), 'I')) {
+                          if (!Channel->Ca() || Channel->Ca() == Device->DeviceNumber() + 1 || Channel->Ca() >= CA_ENCRYPTED_MIN) {
+                             if (Device->ProvidesTransponder(Channel)) {
+                                if (!Device->Receiving()) {
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="tntnet"
-PKG_VERSION="2.2.1"
+PKG_VERSION="2.2"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL-2"
@@ -1,9 +1,3 @@
-4.3.2
-  allow running scripts from addon settings
-4.3.1
-  rebuild for addon api bump
-4.3.0
-  rebuild for addon api bump
 4.1.2
  clean up
 4.1.0
@@ -17,7 +17,7 @@
 ################################################################################

 PKG_NAME="hdhomerun"
-PKG_VERSION="4.3"
+PKG_VERSION="4.1"
 PKG_REV="2"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -32,8 +32,8 @@ unlock() { flock -u $HDHR_LOCKFD; flock -xn $HDHR_LOCKFD && rm -f "$HDHR_LOCKFIL
 # exclusive lock
 exlock

-HDHR_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.hdhomerun"
-HDHR_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.hdhomerun"
+HDHR_ADDON_DIR="$HOME/.xbmc/addons/driver.dvb.hdhomerun"
+HDHR_ADDON_HOME="$HOME/.xbmc/userdata/addon_data/driver.dvb.hdhomerun"
 HDHR_ADDON_SETTINGS="$HDHR_ADDON_HOME/settings.xml"

 # modules are not automatically loaded
@@ -1,6 +1,6 @@
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#      Copyright (C) 2009-2013 Stephan Raue ([email protected])
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -15,3 +15,18 @@
 #  You should have received a copy of the GNU General Public License
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
+
+import os
+import sys
+import xbmcaddon
+
+__settings__      = xbmcaddon.Addon(id = 'driver.dvb.hdhomerun')
+__cwd__           = __settings__.getAddonInfo('path')
+__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
+__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
+
+if __name__ == "__main__" and len(sys.argv) == 2 and sys.argv[1] == 'refresh_tuners':
+  sys.path.append(__resources_lib__)
+  from functions import refresh_hdhomerun_tuners
+  refresh_hdhomerun_tuners(__settings_xml__)
+  __settings__.openSettings()
@@ -1,32 +0,0 @@
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-import os
-import sys
-import xbmcaddon
-
-__settings__      = xbmcaddon.Addon(id = 'driver.dvb.hdhomerun')
-__cwd__           = __settings__.getAddonInfo('path')
-__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
-__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
-
-if len(sys.argv) == 2 and sys.argv[1] == 'refresh_tuners':
-  sys.path.append(__resources_lib__)
-  from functions import refresh_hdhomerun_tuners
-  refresh_hdhomerun_tuners(__settings_xml__)
-  __settings__.openSettings()
@@ -24,7 +24,7 @@ import shutil
 import xmlpp
 from xml.dom import minidom

-__sundtek_userspace__ = '/storage/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv/'
+__sundtek_userspace__ = '/storage/.xbmc/userdata/addon_data/driver.dvb.sundtek-mediatv/'

 ######################################################################################################
 # backup setting.xml file only if backup doesn't exist
@@ -37,39 +37,36 @@ def _usage(this_file):
    return """SYNOPSIS: pretty print an XML document
 USAGE: python %s <filename> \n""" % this_file

-def _pprint_line(indent_level, line, width=100, output=_sys.stdout, ignore_contents = False):
+def _pprint_line(indent_level, line, width=100, output=_sys.stdout):
    if line.strip():
        start = ""
        number_chars = 0
        for l in range(indent_level):
            start = start + " "
            number_chars = number_chars + 1
-        if not ignore_contents:
-            try:
-                elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
-                elem_finished = _re.findall("([?|\]\]/|\-\-]*\>)", line)[0] 
-                #should not have *
-                attrs = _re.findall("(\S*?\=\".*?\")", line)
-                output.write(start + elem_start)
-                number_chars = len(start + elem_start)
-                for attr in attrs:
-                    if (attrs.index(attr) + 1) == len(attrs):
-                        number_chars = number_chars + len(elem_finished)
-                    if (number_chars + len(attr) + 1) > width:
-                        output.write("\n")
-                        for i in range(len(start + elem_start) + 1):
-                            output.write(" ")
-                        number_chars = len(start + elem_start) + 1 
-                    else:
+        try:
+            elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
+            elem_finished = _re.findall("([?|\]\]/]*\>)", line)[0] 
+            #should not have *
+            attrs = _re.findall("(\S*?\=\".*?\")", line)
+            output.write(start + elem_start)
+            number_chars = len(start + elem_start)
+            for attr in attrs:
+                if (attrs.index(attr) + 1) == len(attrs):
+                    number_chars = number_chars + len(elem_finished)
+                if (number_chars + len(attr) + 1) > width:
+                    output.write("\n")
+                    for i in range(len(start + elem_start) + 1):
                        output.write(" ")
-                        number_chars = number_chars + 1
-                    output.write(attr)
-                    number_chars = number_chars + len(attr)
-                output.write(elem_finished + "\n")
-            except IndexError:
-                #give up pretty print this line
-                output.write(start + line + "\n")
-        else:
+                    number_chars = len(start + elem_start) + 1 
+                else:
+                    output.write(" ")
+                    number_chars = number_chars + 1
+                output.write(attr)
+                number_chars = number_chars + len(attr)
+            output.write(elem_finished + "\n")
+        except IndexError:
+            #give up pretty print this line
            output.write(start + line + "\n")
                

@@ -83,8 +80,7 @@ def _get_next_elem(data):
    start_pos = data.find("<")
    end_pos = data.find(">") + 1
    retval = data[start_pos:end_pos]
-    stopper = retval.rfind("/")
-    ignore_contents = False
+    stopper = retval.rfind("/") 
    if stopper < retval.rfind("\""):
        stopper = -1
    single = (stopper > -1 and ((retval.find(">") - stopper) < (stopper - retval.find("<"))))
@@ -93,19 +89,11 @@ def _get_next_elem(data):
    ignore_question =  retval.find("<?") > -1

    if ignore_excl:
-        ignore_contents = True
        cdata = retval.find("<![CDATA[") > -1
        if cdata:
            end_pos = data.find("]]>")
            if end_pos > -1:
                end_pos = end_pos + len("]]>")
-                stopper = end_pos
-        else:
-            end_pos = data.find("-->")
-            if end_pos > -1:
-                end_pos = end_pos + len("-->")
-                stopper = end_pos
-        retval = data[start_pos:end_pos]

    elif ignore_question:
        end_pos = data.find("?>") + len("?>")
@@ -113,12 +101,11 @@ def _get_next_elem(data):
    
    no_indent = ignore or single

-    
+    #print retval, end_pos, start_pos, stopper > -1, no_indent
    return start_pos, \
           end_pos, \
           stopper > -1, \
-           no_indent, \
-           ignore_contents
+           no_indent

 def get_pprint(xml, indent=4, width=80):
    """Returns the pretty printed xml """
@@ -129,8 +116,6 @@ def get_pprint(xml, indent=4, width=80):
            self.output += string
    out = out()
    pprint(xml, output=out, indent=indent, width=width)
-    
-

    return out.output

@@ -141,7 +126,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
    Use indent to select indentation level. Default is 4   """
    data = xml
    indent_level = 0
-    start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
+    start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
    while ((start_pos > -1 and end_pos > -1)):
        _pprint_elem_content(indent_level, data[:start_pos].strip(), 
                             output=output)
@@ -151,8 +136,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
        _pprint_line(indent_level, 
                     data[:end_pos - start_pos], 
                     width=width,
-                     output=output,
-                     ignore_contents=ignore_contents)
+                     output=output)
        data = data[end_pos - start_pos:]
        if not is_stop and not no_indent :
            indent_level = indent_level + indent
@@ -160,7 +144,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
        if not data:
            break
        else:
-            start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
+            start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
    

 if __name__ == "__main__":
@@ -11,6 +11,6 @@
  <category label="9000">
    <setting type="sep" />
    <setting id="ENABLE_TUNER_TYPES" type="bool" label="9005" default="true" />
-    <setting label="9010" option="close" type="action" id="refresh_tuners" action="RunScript($CWD/resources/actions.py, refresh_tuners)" />
+    <setting label="9010" option="close" type="action" action="RunScript($ID, refresh_tuners)" />
  </category>
 </settings>
@@ -1,21 +1,11 @@
-4.3.1
- fix keymaps path
-
-4.3.0
- rebuild for addon api bump
-
 4.1.0
 rebuild for addon api bump
-
 4.0.1
 rebuild
-
 4.0.0
  rebuild for OpenELEC-4.0
-
 3.1.1
  rebuild for OpenELEC-3.2
-
 3.0.1
 - bump addon version

@@ -17,8 +17,8 @@
 ################################################################################

 PKG_NAME="imon-mce"
-PKG_VERSION="4.3"
-PKG_REV="1"
+PKG_VERSION="4.1"
+PKG_REV="0"
 PKG_ARCH="any"
 PKG_LICENSE="OSS"
 PKG_SITE="http://www.openelec.tv"
@@ -21,4 +21,4 @@
 . /etc/profile

 sleep 1 && \
-ir-keytable -p rc6 -w /usr/lib/udev/rc_keymaps/imon_mce &
+ir-keytable -p rc6 -w /etc/rc_keymaps/imon_mce &
@@ -1,15 +1,3 @@
-4.3.4
-  fixed xbmc/kodi rebranding error
-  some fixes
-4.3.3
-  addon transformed to service addon
-  new addon settings option to enable to check for new driver at boot
-4.3.2
-  new addon settings option to enable to update driver from web with latest version
-4.3.1
-  update driver
-4.3.0
-  rebuild for addon api bump
 4.1.5
  dont touch /storage/.profile
 4.1.4
@@ -17,19 +17,19 @@
 ################################################################################

 PKG_NAME="sundtek-mediatv"
-PKG_VERSION="4.3"
-PKG_REV="4"
+PKG_VERSION="4.1"
+PKG_REV="5"
 PKG_ARCH="any"
 PKG_LICENSE="nonfree"
 PKG_SITE="http://support.sundtek.com/"
 PKG_URL=""
-PKG_DEPENDS_TARGET=""
+PKG_DEPENDS_TARGET="toolchain"
 PKG_PRIORITY="optional"
 PKG_SECTION="driver/dvb"
 PKG_SHORTDESC="Sundtek USB Stick DVB userspace driver"
 PKG_LONGDESC="Driver for Sundtek MediaTV Pro (DVB-C, DVB-T, AnalogTV, Composite, S-Video, FM-Radio USB Stick) and Sundtek SkyTV Ultimate (DVB-S/S2 USB)."
 PKG_IS_ADDON="yes"
-PKG_ADDON_TYPE="xbmc.service"
+PKG_ADDON_TYPE="xbmc.python.script"
 PKG_AUTORECONF="no"

 make_target() {
@@ -47,18 +47,11 @@ make_target() {
      INSTALLER_URL="http://sundtek.de/media/netinst/armsysvhf/installer.tar.gz"
      ;;
  esac
-  
  wget -O installer.tar.gz $INSTALLER_URL
-  
  tar -xzf installer.tar.gz
-  
-  chmod -R 755 opt/ etc/
-  
-  rm -f  opt/bin/getinput.sh
-  rm -f  opt/bin/lirc.sh
-  rm -fr opt/lib/pm/
-
-  wget -O version.used http://sundtek.de/media/latest.phtml
+  # we run this via wrapper
+  mv opt/bin/mediaclient opt/bin/mediaclient.bin
+  chmod 755 opt/bin/*
 }

 makeinstall_target() {
@@ -71,5 +64,4 @@ addon() {
  cp -P $PKG_DIR/settings-default.xml $ADDON_BUILD/$PKG_ADDON_ID/
  cp -Pa $PKG_BUILD/opt/bin $ADDON_BUILD/$PKG_ADDON_ID/
  cp -Pa $PKG_BUILD/opt/lib $ADDON_BUILD/$PKG_ADDON_ID/
-  cp $PKG_BUILD/version.used $ADDON_BUILD/$PKG_ADDON_ID/
 }
@@ -17,5 +17,4 @@
  <setting id="DEVICE4_NUM" value="1" />
  <setting id="DEVICE5_IP"  value="" />
  <setting id="DEVICE5_NUM" value="1" />
-  <setting id="CHECK_BOOT" value="false" />
 </settings>
@@ -0,0 +1,2 @@
+#!/bin/sh
+LD_PRELOAD=/storage/.xbmc/addons/driver.dvb.sundtek-mediatv/lib/libmediaclient.so exec mediaclient.bin "$@"
@@ -1,247 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-. /etc/profile
-
-net_tuner_num_fix() {
-  local num=$1
-
-  [ -z "$num" ] && num=1
-  num=$(( $num *1 ))
-  [ $num -lt 1 ] && num=1
-  num=$(( $num -1 ))
-  echo $num
-}
-
-SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
-
-mkdir -p $SUNDTEK_ADDON_HOME
-
-if [ ! -f "$SUNDTEK_ADDON_HOME/sundtek.conf" ]; then
-  cp $SUNDTEK_ADDON_DIR/config/* $SUNDTEK_ADDON_HOME/
-else
-  # in case of missing entries in addon home's sundtek.conf
-  entry_set="$(grep use_hwpidfilter $SUNDTEK_ADDON_HOME/sundtek.conf 2>/dev/null)"
-  if [ -z "$entry_set" ]; then
-    sed -i 's|^device_attach=.*|# device_attach not used anymore\n\n# enable HW PID filter\nuse_hwpidfilter=off\n\n# enable listening on network\nenablenetwork=off|g' $SUNDTEK_ADDON_HOME/sundtek.conf
-    sed -i 's|^#first_adapter=.*|first_adapter=0|g' $SUNDTEK_ADDON_HOME/sundtek.conf
-
-    sed -i 's|.*network tuner IP address (OpenELEC specific).*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
-    sed -i 's|.*network_tuner_ip=.*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
-  fi
-fi
-
-if [ ! -f "$SUNDTEK_ADDON_SETTINGS" ]; then
-  cp $SUNDTEK_ADDON_DIR/settings-default.xml $SUNDTEK_ADDON_SETTINGS
-fi
-
-[ ! -f $SUNDTEK_ADDON_HOME/rc_key_enter.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_enter $SUNDTEK_ADDON_HOME/rc_key_enter.map
-[ ! -f $SUNDTEK_ADDON_HOME/rc_key_ok.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_ok $SUNDTEK_ADDON_HOME/rc_key_ok.map
-
-mkdir -p /var/config
-cat "$SUNDTEK_ADDON_SETTINGS" | awk -F\" '{print $2"=\""$4"\""}' | sed '/^=/d' > /var/config/sundtek-addon.conf
-. /var/config/sundtek-addon.conf
-
-# check if there is new driver on web
-if [ "$CHECK_BOOT" = "true" ]; then
-  if [ ! -f /var/run/sundtek.checked ]; then
-    # only once after boot
-    touch /var/run/sundtek.checked
-
-(
-    # wait some time before checking
-    sleep 20
-    cd $SUNDTEK_ADDON_DIR
-
-    wget -O version.latest http://sundtek.de/media/latest.phtml
-
-    version_used=$(cat version.used)
-    version_latest=$(cat version.latest)
-    if [ "$version_used" != "$version_latest" ]; then
-      # new version exist
-      kodi-send -a "Notification(Sundtek, \"New driver version exist, update manually\", 4000, $SUNDTEK_ADDON_DIR/icon.png)"
-    fi
-)&
-  fi
-fi
-
-if [ -z "$(pidof mediasrv)" ]; then
-  rm -f /var/log/mediasrv.log
-  rm -f /var/log/mediaclient.log
-
-  SUNDTEK_CONF_TMP=/tmp/sundtek.conf
-  cp $SUNDTEK_ADDON_HOME/sundtek.conf $SUNDTEK_CONF_TMP
-
-  [ -z "$LOWEST_ADAPTER_NUM" ] && LOWEST_ADAPTER_NUM=0
-  sed -i "s|^first_adapter=.*|first_adapter=$LOWEST_ADAPTER_NUM|g" $SUNDTEK_CONF_TMP
-
-  # enable HW PID filter
-  if [ "$ENABLE_HW_PID_FILTER" = "true" ]; then
-    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=on|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=off|g' $SUNDTEK_CONF_TMP
-  fi
-
-  # enable IR receiver
-  if [ "$ENABLE_IR_RECEIVER" = "true" ]; then
-    sed -i 's|^ir_disabled=.*|ir_disabled=0|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^ir_disabled=.*|ir_disabled=1|g' $SUNDTEK_CONF_TMP
-  fi
-
-  if [ "$ALLOW_NET_USE" = "true" ]; then
-    sed -i 's|^enablenetwork=.*|enablenetwork=on|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^enablenetwork=.*|enablenetwork=off|g' $SUNDTEK_CONF_TMP
-  fi
-
-  [ "$DEVICE1_IP" = "0.0.0.0" ] && DEVICE1_IP=""
-  [ "$DEVICE2_IP" = "0.0.0.0" ] && DEVICE2_IP=""
-  [ "$DEVICE3_IP" = "0.0.0.0" ] && DEVICE3_IP=""
-  [ "$DEVICE4_IP" = "0.0.0.0" ] && DEVICE4_IP=""
-  [ "$DEVICE5_IP" = "0.0.0.0" ] && DEVICE5_IP=""
-  DEVICE1_NUM=$(net_tuner_num_fix $DEVICE1_NUM)
-  DEVICE2_NUM=$(net_tuner_num_fix $DEVICE2_NUM)
-  DEVICE3_NUM=$(net_tuner_num_fix $DEVICE3_NUM)
-  DEVICE4_NUM=$(net_tuner_num_fix $DEVICE4_NUM)
-  DEVICE5_NUM=$(net_tuner_num_fix $DEVICE5_NUM)
-
-  if [ "$USE_NET_TUNERS" = "true" -a -n "$DEVICE1_IP" ]; then
-    # delete all network tuner entries
-    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
-    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
-    echo "" >>$SUNDTEK_CONF_TMP
-    # remove empty lines at the end of file
-    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-    # add entries
-    echo -e "\n[NETWORK]" >>$SUNDTEK_CONF_TMP
-    for dev in $(seq 0 $DEVICE1_NUM); do
-      echo "device=$DEVICE1_IP:$dev" >>$SUNDTEK_CONF_TMP
-    done
-    if [ -n "$DEVICE2_IP" ]; then
-      for dev in $(seq 0 $DEVICE2_NUM); do
-        echo "device=$DEVICE2_IP:$dev" >>$SUNDTEK_CONF_TMP
-      done
-      if [ -n "$DEVICE3_IP" ]; then
-        for dev in $(seq 0 $DEVICE3_NUM); do
-          echo "device=$DEVICE3_IP:$dev" >>$SUNDTEK_CONF_TMP
-        done
-        if [ -n "$DEVICE4_IP" ]; then
-          for dev in $(seq 0 $DEVICE4_NUM); do
-            echo "device=$DEVICE4_IP:$dev" >>$SUNDTEK_CONF_TMP
-          done
-          if [ -n "$DEVICE5_IP" ]; then
-            for dev in $(seq 0 $DEVICE5_NUM); do
-              echo "device=$DEVICE5_IP:$dev" >>$SUNDTEK_CONF_TMP
-            done
-          fi
-        fi
-      fi
-    fi
-  else
-    # delete all network tuner entries
-    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
-    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
-    echo "" >>$SUNDTEK_CONF_TMP
-    # remove empty lines at the end of file
-    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-  fi
-
-  if [ "$ENABLE_TUNER_TYPES" = "true" ]; then
-    # get tuner serial numbers
-    SERIALS=$(cat /var/config/sundtek-addon.conf | sed -n 's|^ATTACHED_TUNER_\(.*\)_DVBMODE=.*|\1|gp' | sort | uniq)
-    . /var/config/sundtek-addon.conf
-
-    for SERIAL in $SERIALS; do
-      DVBMODE=$(eval echo \$ATTACHED_TUNER_${SERIAL}_DVBMODE)
-      IRPROT=$(eval echo \$ATTACHED_TUNER_${SERIAL}_IRPROT)
-      KEYMAP=$(eval echo \$ATTACHED_TUNER_${SERIAL}_KEYMAP)
-
-      if [ "$DVBMODE" = "DVB-T" ]; then
-        # only set DVB-T because default is DVB-C (and DVB-S is not set either)
-        DVBMODE="DVBT"
-      else
-        DVBMODE=""
-      fi
-
-      [ "$IRPROT" = "NEC" -o "$IRPROT" = "auto" ] && IRPROT=""
-
-      [ ! -f $KEYMAP ] && KEYMAP=""
-
-      # remove setttings for this tuner
-      awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^ir_protocol=|^rcmap=|^initial_dvb_mode=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-types
-      mv ${SUNDTEK_CONF_TMP}-types $SUNDTEK_CONF_TMP
-      echo "" >>$SUNDTEK_CONF_TMP
-      # remove empty lines at the end of file
-      sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-
-      ADDNEW=true
-      if [ -n "$DVBMODE" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "initial_dvb_mode=$DVBMODE" >>$SUNDTEK_CONF_TMP
-      fi
-      if [ -n "$IRPROT" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "ir_protocol=$IRPROT" >>$SUNDTEK_CONF_TMP
-      fi
-      if [ -n "$KEYMAP" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "rcmap=$KEYMAP" >>$SUNDTEK_CONF_TMP
-      fi
-
-      echo "" >>$SUNDTEK_CONF_TMP
-    done
-  fi
-
-  md5_1=$(md5sum -b $SUNDTEK_CONF_TMP | awk '{print $1}')
-  md5_2=$(md5sum -b $SUNDTEK_ADDON_HOME/sundtek.conf | awk '{print $1}')
-  if [ "$md5_1" != "$md5_2" ]; then
-    # file changed - copy to addon home
-    cp $SUNDTEK_CONF_TMP $SUNDTEK_ADDON_HOME/sundtek.conf
-  fi
-
-  chmod +x $SUNDTEK_ADDON_DIR/bin/*
-  mediasrv --wait-for-devices -p $SUNDTEK_ADDON_DIR/bin -c $SUNDTEK_ADDON_HOME/sundtek.conf -d
-
-  # wait few seconds
-  [ -z "$SETTLE_TIME" ] && SETTLE_TIME=0
-  SETTLE_TIME=$(( $SETTLE_TIME *1 ))
-  if [ $SETTLE_TIME -gt 0 ]; then
-    logger -t Sundtek "### Settle for $SETTLE_TIME sec ###"
-    sleep $SETTLE_TIME
-  fi
-
-  if [ "$RUN_USER_SCRIPT" = "true" -a -f "$SUNDTEK_ADDON_HOME/userscript.sh" ]; then
-    logger -t Sundtek "### Running user script $SUNDTEK_ADDON_HOME/userscript.sh ###"
-    cat $SUNDTEK_ADDON_HOME/userscript.sh | dos2unix >/var/run/sundtek-userscript.sh
-    sh /var/run/sundtek-userscript.sh
-  fi
-
-  # save adapter serial number
-  serial_number_old=$(cat $SUNDTEK_ADDON_HOME/adapters.txt 2>/dev/null)
-  serial_number_new=$(mediaclient -e | awk '/device / {print $0} /SERIAL/ {id=1} /ID:/ {if (id==1) print $2}')
-  if [ "$serial_number_old" != "$serial_number_new" ]; then
-    echo "$serial_number_new" >$SUNDTEK_ADDON_HOME/adapters.txt
-  fi
-fi
-
-logger -t Sundtek "### Sundtek ready ###"
@@ -1,119 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-. /etc/profile
-
-SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
-
-trap_exit_install() {
-  kodi-send -a "Notification(Sundtek, Something went wrong. Cleaning..., 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd "$SUNDTEK_ADDON_DIR"
-  rm -fr tmp
-  exit 5
-}
-
-# kill process
-systemctl stop driver.dvb.sundtek-mediatv
-killall -9 mediaclient &>/dev/null
-killall -9 mediasrv &>/dev/null
-
-# exit on errors
-set -e
-
-trap trap_exit_install EXIT
-
-cd "$SUNDTEK_ADDON_DIR"
-rm -fr tmp
-mkdir tmp
-cd tmp
-
-logger -t Sundtek "### Starting updating driver ###"
-kodi-send -a "Notification(Sundtek, Starting updating driver, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
-
-wget -O ../version.used http://sundtek.de/media/latest.phtml
-if [ $? -ne 0 ]; then
-  logger -t Sundtek "### Can't get latest version ###"
-  kodi-send -a "Notification(Sundtek, Cant get latest version, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd ..
-  rm -fr tmp/
-  exit 1
-fi
-
-ARCH=$(sed -n 's|.*\.\([^-]*\)-.*|\1|p' /etc/release | tr -d '\n')
-if [ "$ARCH" = "x86_64" ]; then
-  INSTALLER_URL="http://sundtek.de/media/netinst/64bit/installer.tar.gz"
-elif [ "$ARCH" = "i386" ]; then
-  INSTALLER_URL="http://sundtek.de/media/netinst/32bit/installer.tar.gz"
-elif [ "$ARCH" = "arm" ]; then
-  INSTALLER_URL="http://sundtek.de/media/netinst/armsysvhf/installer.tar.gz"
-else
-  logger -t Sundtek "### Unsupported architecture ###"
-  kodi-send -a "Notification(Sundtek, Unsupported architecture, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd ..
-  rm -fr tmp
-  exit 2
-fi
-
-logger -t Sundtek "### Downloading driver archive for $ARCH ###"
-kodi-send -a "Notification(Sundtek, Downloading driver archive for $ARCH, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
-wget -O installer.tar.gz $INSTALLER_URL
-if [ $? -ne 0 ]; then
-  logger -t Sundtek "### Archive damaged ###"
-  kodi-send -a "Notification(Sundtek, Download failed, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd ..
-  rm -fr tmp/
-  exit 3
-fi
-
-logger -t Sundtek "### Extracting archive ###"
-kodi-send -a "Notification(Sundtek, Extracting archive, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
-tar -xzf installer.tar.gz
-if [ $? -ne 0 ]; then
-  logger -t Sundtek "### Archive damaged ###"
-  kodi-send -a "Notification(Sundtek, Archive damaged, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd ..
-  rm -fr tmp/
-  exit 4
-fi
-
-# fix permissions
-chmod -R 755 opt/ etc/
-
-rm -f  opt/bin/getinput.sh
-rm -f  opt/bin/lirc.sh
-rm -fr opt/lib/pm/
-
-cp -Pa opt/bin/* ../bin/
-cp -Pa opt/lib/* ../lib/
-
-cd ..
-rm -fr tmp
-
-logger -t Sundtek "### Driver update finished ###"
-kodi-send -a "Notification(Sundtek, Driver update finished, 5000, $SUNDTEK_ADDON_DIR/icon.png)"
-kodi-send -a "Notification(Sundtek, Please reboot, 5000, $SUNDTEK_ADDON_DIR/icon.png)"
-
-trap - EXIT
-
-systemctl start driver.dvb.sundtek-mediatv
-
-exit 0
@@ -2,7 +2,7 @@

 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
+#      Copyright (C) 2009-2013 Stephan Raue ([email protected])
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -20,11 +20,223 @@

 . /etc/profile

-SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
+# start locking mechanism - allows only one instance to be run at a time
+SUNDTEK_LOCKFILE="/var/lock/userspace-driver-sundtek.lck"
+SUNDTEK_LOCKFD=99
+# obtain an exclusive lock
+exlock() { eval "exec $SUNDTEK_LOCKFD>\"$SUNDTEK_LOCKFILE\""; flock -x $SUNDTEK_LOCKFD; }
+# drop a lock
+unlock() { flock -u $SUNDTEK_LOCKFD; flock -xn $SUNDTEK_LOCKFD && rm -f "$SUNDTEK_LOCKFILE"; }
+# end locking mechanism

-if [ -f $SUNDTEK_ADDON_DIR/lib/libmediaclient.so ]; then
-  logger -t Sundtek "### Preloading library ###"
-  export LD_PRELOAD=$SUNDTEK_ADDON_DIR/lib/libmediaclient.so
+# exclusive lock
+exlock
+
+net_tuner_num_fix() {
+  local num=$1
+
+  [ -z "$num" ] && num=1
+  num=$(( $num *1 ))
+  [ $num -lt 1 ] && num=1
+  num=$(( $num -1 ))
+  echo $num
+}
+
+SUNDTEK_ADDON_DIR="$HOME/.xbmc/addons/driver.dvb.sundtek-mediatv"
+SUNDTEK_ADDON_HOME="$HOME/.xbmc/userdata/addon_data/driver.dvb.sundtek-mediatv"
+SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
+
+mkdir -p $SUNDTEK_ADDON_HOME
+
+if [ ! -f "$SUNDTEK_ADDON_HOME/sundtek.conf" ]; then
+  cp $SUNDTEK_ADDON_DIR/config/* $SUNDTEK_ADDON_HOME/
 else
-  logger -t Sundtek "### Preloading library doesn't exist ###"
+  # in case of missing entries in addon home's sundtek.conf
+  entry_set="$(grep use_hwpidfilter $SUNDTEK_ADDON_HOME/sundtek.conf 2>/dev/null)"
+  if [ -z "$entry_set" ]; then
+    sed -i 's|^device_attach=.*|# device_attach not used anymore\n\n# enable HW PID filter\nuse_hwpidfilter=off\n\n# enable listening on network\nenablenetwork=off|g' $SUNDTEK_ADDON_HOME/sundtek.conf
+    sed -i 's|^#first_adapter=.*|first_adapter=0|g' $SUNDTEK_ADDON_HOME/sundtek.conf
+
+    sed -i 's|.*network tuner IP address (OpenELEC specific).*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
+    sed -i 's|.*network_tuner_ip=.*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
+  fi
 fi
+
+if [ ! -f "$SUNDTEK_ADDON_SETTINGS" ]; then
+  cp $SUNDTEK_ADDON_DIR/settings-default.xml $SUNDTEK_ADDON_SETTINGS
+fi
+
+[ ! -f $SUNDTEK_ADDON_HOME/rc_key_enter.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_enter $SUNDTEK_ADDON_HOME/rc_key_enter.map
+[ ! -f $SUNDTEK_ADDON_HOME/rc_key_ok.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_ok $SUNDTEK_ADDON_HOME/rc_key_ok.map
+
+mkdir -p /var/config
+cat "$SUNDTEK_ADDON_SETTINGS" | awk -F\" '{print $2"=\""$4"\""}' | sed '/^=/d' > /var/config/sundtek-addon.conf
+. /var/config/sundtek-addon.conf
+
+export LD_PRELOAD=$SUNDTEK_ADDON_DIR/lib/libmediaclient.so
+
+if [ -z "$(pidof mediasrv)" ]; then
+  rm -f /var/log/mediasrv.log
+  rm -f /var/log/mediaclient.log
+
+  SUNDTEK_CONF_TMP=/tmp/sundtek.conf
+  cp $SUNDTEK_ADDON_HOME/sundtek.conf $SUNDTEK_CONF_TMP
+
+  [ -z "$LOWEST_ADAPTER_NUM" ] && LOWEST_ADAPTER_NUM=0
+  sed -i "s|^first_adapter=.*|first_adapter=$LOWEST_ADAPTER_NUM|g" $SUNDTEK_CONF_TMP
+
+  # enable HW PID filter
+  if [ "$ENABLE_HW_PID_FILTER" = "true" ]; then
+    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=on|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=off|g' $SUNDTEK_CONF_TMP
+  fi
+
+  # enable IR receiver
+  if [ "$ENABLE_IR_RECEIVER" = "true" ]; then
+    sed -i 's|^ir_disabled=.*|ir_disabled=0|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^ir_disabled=.*|ir_disabled=1|g' $SUNDTEK_CONF_TMP
+  fi
+
+  if [ "$ALLOW_NET_USE" = "true" ]; then
+    sed -i 's|^enablenetwork=.*|enablenetwork=on|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^enablenetwork=.*|enablenetwork=off|g' $SUNDTEK_CONF_TMP
+  fi
+
+  [ "$DEVICE1_IP" = "0.0.0.0" ] && DEVICE1_IP=""
+  [ "$DEVICE2_IP" = "0.0.0.0" ] && DEVICE2_IP=""
+  [ "$DEVICE3_IP" = "0.0.0.0" ] && DEVICE3_IP=""
+  [ "$DEVICE4_IP" = "0.0.0.0" ] && DEVICE4_IP=""
+  [ "$DEVICE5_IP" = "0.0.0.0" ] && DEVICE5_IP=""
+  DEVICE1_NUM=$(net_tuner_num_fix $DEVICE1_NUM)
+  DEVICE2_NUM=$(net_tuner_num_fix $DEVICE2_NUM)
+  DEVICE3_NUM=$(net_tuner_num_fix $DEVICE3_NUM)
+  DEVICE4_NUM=$(net_tuner_num_fix $DEVICE4_NUM)
+  DEVICE5_NUM=$(net_tuner_num_fix $DEVICE5_NUM)
+
+  if [ "$USE_NET_TUNERS" = "true" -a -n "$DEVICE1_IP" ]; then
+    # delete all network tuner entries
+    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
+    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
+    echo "" >>$SUNDTEK_CONF_TMP
+    # remove empty lines at the end of file
+    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+    # add entries
+    echo -e "\n[NETWORK]" >>$SUNDTEK_CONF_TMP
+    for dev in $(seq 0 $DEVICE1_NUM); do
+      echo "device=$DEVICE1_IP:$dev" >>$SUNDTEK_CONF_TMP
+    done
+    if [ -n "$DEVICE2_IP" ]; then
+      for dev in $(seq 0 $DEVICE2_NUM); do
+        echo "device=$DEVICE2_IP:$dev" >>$SUNDTEK_CONF_TMP
+      done
+      if [ -n "$DEVICE3_IP" ]; then
+        for dev in $(seq 0 $DEVICE3_NUM); do
+          echo "device=$DEVICE3_IP:$dev" >>$SUNDTEK_CONF_TMP
+        done
+        if [ -n "$DEVICE4_IP" ]; then
+          for dev in $(seq 0 $DEVICE4_NUM); do
+            echo "device=$DEVICE4_IP:$dev" >>$SUNDTEK_CONF_TMP
+          done
+          if [ -n "$DEVICE5_IP" ]; then
+            for dev in $(seq 0 $DEVICE5_NUM); do
+              echo "device=$DEVICE5_IP:$dev" >>$SUNDTEK_CONF_TMP
+            done
+          fi
+        fi
+      fi
+    fi
+  else
+    # delete all network tuner entries
+    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
+    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
+    echo "" >>$SUNDTEK_CONF_TMP
+    # remove empty lines at the end of file
+    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+  fi
+
+  if [ "$ENABLE_TUNER_TYPES" = "true" ]; then
+    # get tuner serial numbers
+    SERIALS=$(cat /var/config/sundtek-addon.conf | sed -n 's|^ATTACHED_TUNER_\(.*\)_DVBMODE=.*|\1|gp' | sort | uniq)
+    . /var/config/sundtek-addon.conf
+
+    for SERIAL in $SERIALS; do
+      DVBMODE=$(eval echo \$ATTACHED_TUNER_${SERIAL}_DVBMODE)
+      IRPROT=$(eval echo \$ATTACHED_TUNER_${SERIAL}_IRPROT)
+      KEYMAP=$(eval echo \$ATTACHED_TUNER_${SERIAL}_KEYMAP)
+
+      if [ "$DVBMODE" = "DVB-T" ]; then
+        # only set DVB-T because default is DVB-C (and DVB-S is not set either)
+        DVBMODE="DVBT"
+      else
+        DVBMODE=""
+      fi
+
+      [ "$IRPROT" = "NEC" -o "$IRPROT" = "auto" ] && IRPROT=""
+
+      [ ! -f $KEYMAP ] && KEYMAP=""
+
+      # remove setttings for this tuner
+      awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^ir_protocol=|^rcmap=|^initial_dvb_mode=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-types
+      mv ${SUNDTEK_CONF_TMP}-types $SUNDTEK_CONF_TMP
+      echo "" >>$SUNDTEK_CONF_TMP
+      # remove empty lines at the end of file
+      sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+
+      ADDNEW=true
+      if [ -n "$DVBMODE" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "initial_dvb_mode=$DVBMODE" >>$SUNDTEK_CONF_TMP
+      fi
+      if [ -n "$IRPROT" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "ir_protocol=$IRPROT" >>$SUNDTEK_CONF_TMP
+      fi
+      if [ -n "$KEYMAP" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "rcmap=$KEYMAP" >>$SUNDTEK_CONF_TMP
+      fi
+
+      echo "" >>$SUNDTEK_CONF_TMP
+    done
+  fi
+
+  md5_1=$(md5sum -b $SUNDTEK_CONF_TMP | awk '{print $1}')
+  md5_2=$(md5sum -b $SUNDTEK_ADDON_HOME/sundtek.conf | awk '{print $1}')
+  if [ "$md5_1" != "$md5_2" ]; then
+    # file changed - copy to addon home
+    cp $SUNDTEK_CONF_TMP $SUNDTEK_ADDON_HOME/sundtek.conf
+  fi
+
+  mediasrv --wait-for-devices -p $SUNDTEK_ADDON_DIR/bin -c $SUNDTEK_ADDON_HOME/sundtek.conf -d
+
+  # wait few seconds
+  [ -z "$SETTLE_TIME" ] && SETTLE_TIME=0
+  SETTLE_TIME=$(( $SETTLE_TIME *1 ))
+  if [ $SETTLE_TIME -gt 0 ]; then
+    logger -t Sundtek "### Settle for $SETTLE_TIME sec ###"
+    sleep $SETTLE_TIME
+  fi
+
+  if [ "$RUN_USER_SCRIPT" = "true" -a -f "$SUNDTEK_ADDON_HOME/userscript.sh" ]; then
+    logger -t Sundtek "### Running user script $SUNDTEK_ADDON_HOME/userscript.sh ###"
+    cat $SUNDTEK_ADDON_HOME/userscript.sh | dos2unix >/var/run/sundtek-userscript.sh
+    sh /var/run/sundtek-userscript.sh
+  fi
+(
+  # save adapter serial number in background
+  sleep 5
+  serial_number_old=$(cat $SUNDTEK_ADDON_HOME/adapters.txt 2>/dev/null)
+  serial_number_new=$(mediaclient.bin -e | awk '/device / {print $0} /ID:/ {print $2}')
+  if [ "$serial_number_old" != "$serial_number_new" ]; then
+    echo "$serial_number_new" >$SUNDTEK_ADDON_HOME/adapters.txt
+  fi
+)&
+fi
+
+logger -t Sundtek "### Sundtek ready ###"
+
+# unlock the lock
+unlock
@@ -15,3 +15,22 @@
 #  You should have received a copy of the GNU General Public License
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
+
+import os
+import sys
+import xbmcaddon
+
+__settings__      = xbmcaddon.Addon(id = 'driver.dvb.sundtek-mediatv')
+__cwd__           = __settings__.getAddonInfo('path')
+__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
+__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
+
+__mediaclient__   = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'mediaclient.bin'))
+__ld_preload__    = xbmc.translatePath(os.path.join(__cwd__, 'lib', 'libmediaclient.so'))
+__mediaclient_e__ = 'LD_PRELOAD=' + __ld_preload__ + ' ' + __mediaclient__ + ' -e'
+
+if __name__ == "__main__" and len(sys.argv) == 2 and sys.argv[1] == 'refresh_tuners':
+  sys.path.append(__resources_lib__)
+  from functions import refresh_sundtek_tuners
+  refresh_sundtek_tuners(__settings_xml__, __mediaclient_e__)
+  __settings__.openSettings()
@@ -1,45 +0,0 @@
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue ([email protected])
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-import os
-import sys
-import subprocess
-import xbmcaddon
-
-__settings__      = xbmcaddon.Addon(id = 'driver.dvb.sundtek-mediatv')
-__cwd__           = __settings__.getAddonInfo('path')
-__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
-__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
-
-__mediaclient__   = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'mediaclient'))
-__mediaclient_e__ = __mediaclient__ + ' -e'
-__update_sh__     = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'sundtek-update-driver.sh'))
-
-if len(sys.argv) == 2:
-  if sys.argv[1] == 'refresh_tuners':
-    print "sundtek refresh tuners"
-    sys.path.append(__resources_lib__)
-    from functions import refresh_sundtek_tuners
-    refresh_sundtek_tuners(__settings_xml__, __mediaclient_e__)
-    __settings__.openSettings()
-  elif sys.argv[1] == 'update_driver':
-    print "sundtek update driver"
-    proc = subprocess.Popen([__update_sh__], shell = True)
-    return_code = proc.wait()
-    print "sundtek update driver return value " + str(return_code)
-    __settings__.openSettings()
				`@@ -1 +0,0 @@`
				`The issue tracker has moved to https://github.com/libretro/Lakka-LibreELEC/issues`