Files
LibretroAdmin 661fdde857 Input: motion from Switch Pro Controllers on the hid joypad driver
The Pro Controller, and the pads that pass for one (8BitDo's in Switch
mode among them), now give a core their accelerometer and gyroscope,
read as SDL reads them:

- The sensors' calibration is read from the pad's flash with the stick
  calibration: the factory's at 0x6020, then the user's origins at
  0x8026 where the user calibrated.
- Subcommand 0x40 turns the sensors on while a core asks for them and
  off when it is done, sent from the poll like the player lights.
- Each report 0x30 carries three samples; the newest one is kept. The
  values go out in g and radians a second, on the axes SDL gives them,
  which are the DualShock 4's, and so on the same axes as winraw's
  DualShock 4 and DualSense.

How it gets there:
- Pad handlers can now have set_sensor and sensor ops.
- hidraw and winusb route the driver's sensor calls to the slot's
  handler.
- The hid joypad driver passes the frontend's set_sensor_state and
  get_sensor_input on to its hid driver.
- The beside layer sends a hid pad's sensor calls to the hid driver
  rather than to the joypad driver it stands beside.

connect_parity_test checks the calibration reads, the 0x40 commands and
the values from a sample.
2026-10-22 02:33:45 +02:00
..
2021-10-16 14:52:56 -07:00
2021-10-05 09:10:41 -07:00