Justin Ruggles
6aba117f12
adxenc: use AVCodec.encode2()
2012-03-21 15:04:42 -04:00
Justin Ruggles
54e6cf8a94
adxenc: Use the AVFrame in ADXContext for coded_frame
2012-03-21 15:04:42 -04:00
Ronald S. Bultje
68fd077f68
indeo4: fix out-of-bounds function call.
...
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
2012-03-21 19:01:08 +01:00
Diego Biurrun
3b327a4b42
configure: Restructure help output.
...
Break some of the longer sections into smaller sensible pieces;
make some option descriptions and option ordering more consistent.
2012-03-21 18:14:22 +01:00
Diego Biurrun
478fd534af
configure: Internal-only components should not be command-line selectable.
2012-03-21 18:14:21 +01:00
Justin Ruggles
5d4017b8f3
vorbisenc: use AVCodec.encode2()
2012-03-21 12:49:36 -04:00
Justin Ruggles
e5aab2d7a4
libvorbis: use AVCodec.encode2()
2012-03-21 12:49:36 -04:00
Justin Ruggles
8ccf545b95
libopencore-amrnbenc: use AVCodec.encode2()
2012-03-21 12:49:36 -04:00
Justin Ruggles
330d9d1b50
ra144enc: use AVCodec.encode2()
2012-03-21 12:49:36 -04:00
Justin Ruggles
f090428234
nellymoserenc: use AVCodec.encode2()
2012-03-21 12:49:35 -04:00
Justin Ruggles
32173df3d2
roqaudioenc: use AVCodec.encode2()
...
The first frame pts must be saved until we have 8 frames since RoQ audio
requires 8 frames in the first packet.
2012-03-21 12:49:35 -04:00
Justin Ruggles
b03dcf07f6
libspeex: use AVCodec.encode2()
2012-03-21 12:49:35 -04:00
Justin Ruggles
57a52f258e
libvo_amrwbenc: use AVCodec.encode2()
2012-03-21 12:49:35 -04:00
Justin Ruggles
db440fa12d
libvo_aacenc: use AVCodec.encode2()
2012-03-21 12:49:35 -04:00
Justin Ruggles
27bacfeb57
wmaenc: use AVCodec.encode2()
2012-03-21 12:49:32 -04:00
Justin Ruggles
b0f75ba272
mpegaudioenc: use AVCodec.encode2()
...
Update FATE references due to encoder delay.
2012-03-20 18:56:22 -04:00
Justin Ruggles
3d853d7ab3
libmp3lame: use AVCodec.encode2()
2012-03-20 18:56:18 -04:00
Justin Ruggles
1987a940b7
libgsmenc: use AVCodec.encode2()
2012-03-20 18:55:39 -04:00
Justin Ruggles
d1afb2f94e
libfaac: use AVCodec.encode2()
...
Encoder output is delayed by several frames, so we keep a queue of input
frame timing info to match up with corresponding output packets.
2012-03-20 18:55:36 -04:00
Justin Ruggles
59041fd053
g726enc: use AVCodec.encode2()
2012-03-20 18:47:23 -04:00
Justin Ruggles
bb03b6f7b1
g722enc: use AVCodec.encode2()
...
FATE reference updated due timestamp rounding because of resampling from
44100 Hz to 16000 Hz in avconv.
2012-03-20 18:47:23 -04:00
Justin Ruggles
910bdb9a42
flacenc: use AVCodec.encode2()
2012-03-20 18:47:19 -04:00
Justin Ruggles
24e74f0a0f
adpcmenc: update to AVCodec.encode2()
2012-03-20 18:46:57 -04:00
Justin Ruggles
aa872af5e3
ac3enc: update to AVCodec.encode2()
...
Update FATE references due to encoder delay.
2012-03-20 18:46:56 -04:00
Justin Ruggles
ad95307f92
aacenc: use AVCodec.encode2()
2012-03-20 18:46:49 -04:00
Justin Ruggles
4bf64961a9
avcodec: add code for a frame queue for use by audio encoders with delay
...
This simplifies matching of timestamps between input frames and output
packets.
2012-03-20 16:04:21 -04:00
Justin Ruggles
c9594fe0fb
avconv: free packet in write_frame() when discarding due to frame number limit
...
Fixes a memleak when using the -frames option with audio.
2012-03-20 15:51:58 -04:00
Justin Ruggles
e056f8d37d
FATE: use +/- flag option syntax for vp8 emu-edge tests
2012-03-20 15:51:58 -04:00
Anton Khirnov
a6733202cc
lavf: make av_interleave_packet_per_dts() private.
...
There is no reason for it to be public, it's only meant to be used
internally.
2012-03-20 20:12:16 +01:00
Anton Khirnov
3c90cc2ef2
lavf: deprecate av_read_packet().
...
The caller can achieve the same effect (i.e. getting raw unparsed/mangled
packets) with av_read_frame() and AVFMT_FLAG_NOPARSE |
AVFMT_FLAG_NOFILLIN
2012-03-20 20:12:16 +01:00
Justin Ruggles
f63412fc74
oggdec: output correct timestamps for Vorbis
...
Takes encoder delay into account by comparing first the coded page
duration with the calculated page duration. Handles last packet duration
if needed, also by comparing coded duration with calculated duration.
Also does better handling of timestamp generation for packets in the
first page for streamed ogg files where the start time is not
necessarily zero.
2012-03-20 14:39:57 -04:00
Justin Ruggles
9b9fc9ba32
avconv: pass input stream timestamps to audio encoders
...
5 FATE test references updated due to using demuxer-generated timestamps that
are either not sample-accurate or are slightly off in the input file.
2012-03-20 14:12:54 -04:00
Justin Ruggles
a1977e0103
lavc: shrink encoded audio packet size after encoding.
2012-03-20 14:12:54 -04:00
Justin Ruggles
777365fe86
xa: set correct bit rate
...
Also fixes stream duration calculation.
2012-03-20 14:12:54 -04:00
Justin Ruggles
a54bc52265
xa: do not set bit_rate, block_align, or bits_per_coded_sample
...
The values in the header refer to decoded data, not compressed data.
2012-03-20 14:12:53 -04:00
Justin Ruggles
64de57f645
xa: fix end-of-file handling
...
Do not output an extra packet when out_size is reached.
Also return AVERROR_EOF instead of AVERROR(EIO).
2012-03-20 14:12:53 -04:00
Justin Ruggles
cd2ffb67ad
xa: fix timestamp calculation
...
The packet duration is always 28 samples.
2012-03-20 14:12:53 -04:00
Kostya Shishkov
1d10afd581
bink: fix typo in FFALIGN() argument
2012-03-20 18:57:51 +01:00
Kostya Shishkov
8ae28ac0f3
bink: align plane width to 8 when calculating bundle sizes
...
This fixes decoding of Bink files with non-multiple-of-16 width.
2012-03-20 16:33:57 +01:00
Mans Rullgard
2ac3df858c
doc: pass -Idoc texi2html and texi2pod
...
This fixes doc generation in build tree separate from source.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-03-20 11:10:25 +00:00
Mans Rullgard
b8b207e896
doc: texi2pod: add -I flag
...
This allows specifying additional directories to search for
@include files.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2012-03-20 11:10:25 +00:00
Martin Storsjö
39f5a5462c
movenc: Add a min_frag_duration option
...
The other fragmentation options (frag_duration, frag_size and
frag_keyframe) are combined with OR, cutting fragments at the
first of the conditions being fulfilled.
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-03-20 11:18:05 +02:00
Martin Storsjö
ccfa8aa26f
rtsp: Set the default delay to 0.1 s for the RTSP/SDP/RTP demuxers
...
This enables reordering of UDP packets by default, unless the caller
explicitly sets -max_delay 0.
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-03-20 10:53:49 +02:00
Martin Storsjö
4fa57d524f
libavformat: Set the default for the max_delay option to -1
...
Make the muxers/demuxers that use the field handle the default
-1 in the same way as 0.
This allows distinguishing an intentionally set 0 from the default
value where the user hasn't set it.
Signed-off-by: Martin Storsjö <martin@martin.st>
2012-03-20 10:53:47 +02:00
Anton Khirnov
0d0b81f941
Generate manpages for AV{Format,Codec}Context AVOptions.
2012-03-20 07:10:06 +01:00
Anton Khirnov
4fea8959d8
doc/avconv: remove entries for AVOptions.
...
Documentation for those will be generated automatically.
2012-03-20 07:09:54 +01:00
Anton Khirnov
5626697104
Move AVFormatContext/AVCodecContext option tables to separate files.
...
This will allow us to automatically generate manpages for them.
2012-03-20 07:09:18 +01:00
Anton Khirnov
40b41be3fa
lavf: use AVStream.discard to disable queueing attached pictures.
2012-03-20 06:53:44 +01:00
Anton Khirnov
01fcc42b90
lavf: requeue attached pictures after seeking.
...
This allows the caller to get them without special code even after
seeking before receiving any data.
2012-03-20 06:52:33 +01:00
Anton Khirnov
713f3062a7
id3v2: set the keyframe flag on attached pictures.
2012-03-20 06:52:07 +01:00