Sync with Trunk (Part IV)

Sync with Trunk (Part III)
Sync with Trunk (Part II) - I knew I'd miss something.
2026-11-08 07:28:22 -10:00 · 2010-09-20 08:21:41 +00:00 · 2010-09-20 08:06:39 +00:00 · 2010-09-20 07:17:50 +00:00 · 2010-09-20 05:49:34 +00:00 · 2010-03-04 09:53:05 +00:00
2272 changed files with 395177 additions and 489962 deletions
@@ -1,182 +0,0 @@
-version: 2
-
-references:
-  container_config: &container_config
-    docker:
-      - image: "debian:stretch"
-        working_directory: /root/build
-
-  restore_repo: &restore_repo
-    restore_cache:
-      keys:
-        - source-repo-{{ .Branch }}-{{ .Revision }}
-        - source-repo-{{ .Branch }}
-        - source-repo
-
-  cmake_configure: &cmake_configure
-    run:
-      name: Creating Build Files
-      command: |
-        mkdir build
-        cd build
-
-        CXXFLAGS="-m64 -mtune=generic -mfpmath=sse -msse -msse2 -pipe -Wno-unknown-pragmas"
-        CFLAGS="-m64 -mtune=generic -mfpmath=sse -msse -msse2 -pipe -Wno-unknown-pragmas"
-
-        if [[ "$CC" =~ ^clang.*$ ]]; then
-            CXXFLAGS="$CXXFLAGS -stdlib=libc++"
-        fi
-
-        eval $CC --version
-
-        export CXXFLAGS
-        export CFLAGS
-        CMAKE="cmake -G Ninja -DFSO_FATAL_WARNINGS=ON $CMAKE_OPTIONS"
-        eval $CMAKE -DCMAKE_BUILD_TYPE=$CONFIGURATION -DFSO_BUILD_TESTS=ON -DFSO_BUILD_INCLUDED_LIBS=ON ..
-
-  compile: &compile
-    run:
-      name: Compiling Source code
-      command: |
-        cd build
-        ninja -k 20 all
-
-  run_tests: &run_tests
-    run:
-      name: Run unit tests
-      command: |
-        ./build/bin/unittests --gtest_shuffle
-
-  compile_steps: &compile_steps
-    steps:
-      - *restore_repo
-      - *cmake_configure
-      - *compile
-      - *run_tests
-jobs:
-  checkout_code:
-    <<: *container_config
-    steps:
-      - run:
-          name: Installing Git
-          command: 'apt-get update && apt-get -yq install git'
-      - *restore_repo
-      - checkout
-      - run:
-          name: Updating submodules
-          command: 'git submodule update --init --recursive'
-      - save_cache:
-          key: source-repo-{{ .Branch }}-{{ .Revision }}
-          paths:
-            - .
-
-  build_gcc_lowest_debug:
-    docker:
-      - image: asarium/fso_compile:gcc-lowest
-        working_directory: /root/build
-    environment:
-      CC: gcc
-      CXX: g++
-      CONFIGURATION: Debug
-    <<: *compile_steps
-
-  build_gcc_lowest_release:
-    docker:
-      - image: asarium/fso_compile:gcc-lowest
-        working_directory: /root/build
-    environment:
-      CC: gcc
-      CXX: g++
-      CONFIGURATION: Release
-    <<: *compile_steps
-
-  build_gcc_latest_debug:
-    docker:
-      - image: asarium/fso_compile:gcc-latest
-        working_directory: /root/build
-    environment:
-      CC: gcc
-      CXX: g++
-      CONFIGURATION: Debug
-    <<: *compile_steps
-
-  build_gcc_latest_release:
-    docker:
-      - image: asarium/fso_compile:gcc-latest
-        working_directory: /root/build
-    environment:
-      CC: gcc
-      CXX: g++
-      CONFIGURATION: Release
-    <<: *compile_steps
-
-  build_clang_latest_debug:
-    docker:
-      - image: asarium/fso_compile:clang-latest
-        working_directory: /root/build
-    environment:
-      CC: clang-8
-      CXX: clang++-8
-      CONFIGURATION: Debug
-    <<: *compile_steps
-
-  build_clang_latest_release:
-    docker:
-      - image: asarium/fso_compile:clang-latest
-        working_directory: /root/build
-    environment:
-      CC: clang-8
-      CXX: clang++-8
-      CONFIGURATION: Release
-    <<: *compile_steps
-
-  build_clang_lowest_debug:
-    docker:
-      - image: asarium/fso_compile:clang-lowest
-        working_directory: /root/build
-    environment:
-      CC: clang
-      CXX: clang++
-      CONFIGURATION: Debug
-    <<: *compile_steps
-
-  build_clang_lowest_release:
-    docker:
-      - image: asarium/fso_compile:clang-lowest
-        working_directory: /root/build
-    environment:
-      CC: clang
-      CXX: clang++
-      CONFIGURATION: Release
-    <<: *compile_steps
-
-workflows:
-  version: 2
-
-  build_test:
-    jobs:
-      - checkout_code
-      - build_gcc_lowest_debug:
-          requires:
-            - checkout_code
-      - build_gcc_lowest_release:
-          requires:
-            - checkout_code
-      - build_gcc_latest_debug:
-          requires:
-            - checkout_code
-      - build_gcc_latest_release:
-          requires:
-            - checkout_code
-      - build_clang_latest_debug:
-          requires:
-            - checkout_code
-      - build_clang_latest_release:
-          requires:
-            - checkout_code
-      - build_clang_lowest_debug:
-          requires:
-            - checkout_code
-      - build_clang_lowest_release:
-          requires:
-            - checkout_code
@@ -1,100 +0,0 @@
---
-Language:        Cpp
-# BasedOnStyle:  LLVM
-AccessModifierOffset: -2
-AlignAfterOpenBracket: Align
-AlignConsecutiveAssignments: true
-AlignConsecutiveDeclarations: false
-AlignEscapedNewlinesLeft: false
-AlignOperands:   true
-AlignTrailingComments: true
-AllowAllParametersOfDeclarationOnNextLine: true
-AllowShortBlocksOnASingleLine: false
-AllowShortCaseLabelsOnASingleLine: false
-AllowShortFunctionsOnASingleLine: All
-AllowShortIfStatementsOnASingleLine: false
-AllowShortLoopsOnASingleLine: false
-AlwaysBreakAfterDefinitionReturnType: None
-AlwaysBreakAfterReturnType: None
-AlwaysBreakBeforeMultilineStrings: false
-AlwaysBreakTemplateDeclarations: true
-BinPackArguments: true
-BinPackParameters: true
-BraceWrapping:   
-  AfterClass:      false
-  AfterControlStatement: false
-  AfterEnum:       false
-  AfterFunction:   true
-  AfterNamespace:  false
-  AfterObjCDeclaration: false
-  AfterStruct:     false
-  AfterUnion:      false
-  BeforeCatch:     false
-  BeforeElse:      false
-  IndentBraces:    false
-BreakBeforeBinaryOperators: None
-BreakBeforeBraces: Custom
-BreakBeforeTernaryOperators: true
-BreakConstructorInitializersBeforeComma: false
-BreakAfterJavaFieldAnnotations: false
-BreakStringLiterals: true
-ColumnLimit:     120
-CommentPragmas:  '^ IWYU pragma:'
-ConstructorInitializerAllOnOneLineOrOnePerLine: false
-ConstructorInitializerIndentWidth: 4
-ContinuationIndentWidth: 4
-Cpp11BracedListStyle: true
-DerivePointerAlignment: false
-DisableFormat:   false
-ForEachMacros:   [ foreach, Q_FOREACH, BOOST_FOREACH ]
-IncludeBlocks: Regroup
-IncludeCategories:
-  - Regex:           '^(<.*\.(h|hh|hpp)>)$' # Includes of external libraries
-    Priority:        4
-  - Regex:           '^(<.*>)$' # standard library includes (won't match deprecated C headers)
-    Priority:        5
-  - Regex:           '^"[^/]*\.(h)"$' # Local includes
-    Priority:        1
-  - Regex:           '^".*\.(h)"$' # standard engine includes
-    Priority:        2
-  - Regex:           '.*' # Catch all in case something is unhandled above
-    Priority:        3
-IncludeIsMainRegex: '$'
-IndentCaseLabels: false
-IndentWidth:     4
-IndentWrappedFunctionNames: false
-JavaScriptQuotes: Leave
-JavaScriptWrapImports: true
-KeepEmptyLinesAtTheStartOfBlocks: true
-MacroBlockBegin: ''
-MacroBlockEnd:   ''
-MaxEmptyLinesToKeep: 1
-NamespaceIndentation: None
-ObjCBlockIndentWidth: 2
-ObjCSpaceAfterProperty: false
-ObjCSpaceBeforeProtocolList: true
-PenaltyBreakBeforeFirstCallParameter: 19
-PenaltyBreakComment: 300
-PenaltyBreakFirstLessLess: 120
-PenaltyBreakString: 1000
-PenaltyExcessCharacter: 1000000
-PenaltyReturnTypeOnItsOwnLine: 60
-PointerAlignment: Left
-ReflowComments:  true
-SortIncludes:    true
-SpaceAfterCStyleCast: false
-SpaceAfterTemplateKeyword: true
-SpaceBeforeAssignmentOperators: true
-SpaceBeforeParens: ControlStatements
-SpaceInEmptyParentheses: false
-SpacesBeforeTrailingComments: 1
-SpacesInAngles:  false
-SpacesInContainerLiterals: true
-SpacesInCStyleCastParentheses: false
-SpacesInParentheses: false
-SpacesInSquareBrackets: false
-Standard:        Cpp11
-TabWidth:        4
-UseTab:          ForIndentation
-...
-
@@ -1,24 +0,0 @@
---
-Checks: "-*,\
-modernize-*,\
-modernize-raw-string-literal,\
-modernize-use-using,\
-modernize-make-unique,\
-performance-*,\
-performance-type-promotion-in-math-fn,\
-misc-*,\
-misc-macro-parentheses,\
-misc-misplaced-widening-cast,\
-misc-static-assert,\
-modernize-make-unique,\
-"
-WarningsAsErrors: ''
-HeaderFilterRegex: 'code/.*$|freespace2/.*$|qtfred/.*$|test/src/.*$|build/.*$'
-AnalyzeTemporaryDtors: false
-CheckOptions:
-  - key:          'misc-assert-side-effect.AssertMacros'
-    value:        'assert,Assert,Assertion'
-  - key:          'modernize-use-emplace.ContainersWithPushBack'
-    value:        'std::vector;std::deque;std::list;SCP_vector;SCP_deque;SCP_list'
-...
-
@@ -1,21 +0,0 @@
-
-build:
-  image: teaci/msys$$arch
-  pull: true
-  shell: mingw$$arch
-  commands:
-    - git submodule update --init --recursive
-    - if [ $$arch = 32 ]; then target=i686; fi
-    - if [ $$arch = 64 ]; then target=x86_64; fi
-    - pacman -S --needed --noconfirm --noprogressbar mingw-w64-${target}-pkg-config mingw-w64-${target}-cmake
-    - mkdir build && cd build
-    - cmake -G"Unix Makefiles" -DCMAKE_BUILD_TYPE=$$CONFIGURATION -DFSO_USE_SPEECH=OFF -DFSO_USE_VOICEREC=OFF -DFSO_FATAL_WARNINGS=ON -DFSO_BUILD_FRED2=OFF ..
-    - make -j$(nproc) all
-
-matrix:
-  arch:
-    - 64
-    - 32
-  CONFIGURATION:
-    - Debug
-    - Release
@@ -1,7 +0,0 @@
-root = true
-
-[*.{h,cpp}]
-indent_style = tab
-
-[*.sdr]
-indent_style = tab
@@ -1,259 +0,0 @@
-#OS junk files
-[Tt]humbs.db
-*.DS_Store
-
-#Visual Studio files
-*.[Oo]bj
-*.user
-*.aps
-*.pch
-*.vspscc
-*.vssscc
-*_i.c
-*_p.c
-*.ncb
-*.suo
-*.tlb
-*.tlh
-*.bak
-*.[Cc]ache
-*.ilk
-*.log
-*.lib
-*.sbr
-*.sdf
-*.opensdf
-*.unsuccessfulbuild
-ipch/
-[Oo]bj/
-Ankh.NoLoad
-*.VC.db
-*.VC.VC.opendb
-
-#MonoDevelop
-*.pidb
-*.userprefs
-
-#Tooling
-_ReSharper*/
-*.resharper
-[Tt]est[Rr]esult*
-*.sass-cache
-
-#Project files
-[Bb]uild/
-
-#Subversion files
-.svn
-
-# Office Temp Files
-~$*
-
-# vim Temp Files
-*~
-
-#NuGet
-packages/
-*.nupkg
-
-#ncrunch
-*ncrunch*
-*crunch*.local.xml
-
-# visual studio database projects
-*.dbmdl
-
-#Test files
-*.testsettings
-
-#===========
-
-#########################
-# .gitignore file for Xcode4 and Xcode5 Source projects
-#
-# Apple bugs, waiting for Apple to fix/respond:
-#
-#    15564624 - what does the xccheckout file in Xcode5 do? Where's the documentation?
-#
-# Version 2.1
-# For latest version, see: http://stackoverflow.com/questions/49478/git-ignore-file-for-xcode-projects
-#
-# 2013 updates:
-# - fixed the broken "save personal Schemes"
-# - added line-by-line explanations for EVERYTHING (some were missing)
-#
-# NB: if you are storing "built" products, this WILL NOT WORK,
-# and you should use a different .gitignore (or none at all)
-# This file is for SOURCE projects, where there are many extra
-# files that we want to exclude
-#
-#########################
-
-#####
-# OS X temporary files that should never be committed
-#
-# c.f. http://www.westwind.com/reference/os-x/invisibles.html
-
-.DS_Store
-
-# c.f. http://www.westwind.com/reference/os-x/invisibles.html
-
-.Trashes
-
-# c.f. http://www.westwind.com/reference/os-x/invisibles.html
-
-*.swp
-
-# *.lock - this is used and abused by many editors for many different things.
-#    For the main ones I use (e.g. Eclipse), it should be excluded
-#    from source-control, but YMMV
-
-*.lock
-
-#
-# profile - REMOVED temporarily (on double-checking, this seems incorrect; I can't find it in OS X docs?)
-#profile
-
-
-####
-# Xcode temporary files that should never be committed
-#
-# NB: NIB/XIB files still exist even on Storyboard projects, so we want this...
-
-*~.nib
-
-
-####
-# Xcode build files -
-#
-# NB: slash on the end, so we only remove the FOLDER, not any files that were badly named "DerivedData"
-
-DerivedData/
-
-# NB: slash on the end, so we only remove the FOLDER, not any files that were badly named "build"
-
-build/
-
-
-#####
-# Xcode private settings (window sizes, bookmarks, breakpoints, custom executables, smart groups)
-#
-# This is complicated:
-#
-# SOMETIMES you need to put this file in version control.
-# Apple designed it poorly - if you use "custom executables", they are
-#  saved in this file.
-# 99% of projects do NOT use those, so they do NOT want to version control this file.
-#  ..but if you're in the 1%, comment out the line "*.pbxuser"
-
-# .pbxuser: http://lists.apple.com/archives/xcode-users/2004/Jan/msg00193.html
-
-*.pbxuser
-
-# .mode1v3: http://lists.apple.com/archives/xcode-users/2007/Oct/msg00465.html
-
-*.mode1v3
-
-# .mode2v3: http://lists.apple.com/archives/xcode-users/2007/Oct/msg00465.html
-
-*.mode2v3
-
-# .perspectivev3: http://stackoverflow.com/questions/5223297/xcode-projects-what-is-a-perspectivev3-file
-
-*.perspectivev3
-
-#    NB: also, whitelist the default ones, some projects need to use these
-!default.pbxuser
-!default.mode1v3
-!default.mode2v3
-!default.perspectivev3
-
-
-####
-# Xcode 4 - semi-personal settings
-#
-#
-# OPTION 1: ---------------------------------
-#     throw away ALL personal settings (including custom schemes!
-#     - unless they are "shared")
-#
-# NB: this is exclusive with OPTION 2 below
-xcuserdata
-
-# OPTION 2: ---------------------------------
-#     get rid of ALL personal settings, but KEEP SOME OF THEM
-#     - NB: you must manually uncomment the bits you want to keep
-#
-# NB: this *requires* git v1.8.2 or above; you may need to upgrade to latest OS X,
-#    or manually install git over the top of the OS X version
-# NB: this is exclusive with OPTION 1 above
-#
-#xcuserdata/**/*
-
-#     (requires option 2 above): Personal Schemes
-#
-#!xcuserdata/**/xcschemes/*
-
-####
-# XCode 4 workspaces - more detailed
-#
-# Workspaces are important! They are a core feature of Xcode - don't exclude them :)
-#
-# Workspace layout is quite spammy. For reference:
-#
-# /(root)/
-#   /(project-name).xcodeproj/
-#     project.pbxproj
-#     /project.xcworkspace/
-#       contents.xcworkspacedata
-#       /xcuserdata/
-#         /(your name)/xcuserdatad/
-#           UserInterfaceState.xcuserstate
-#     /xcsshareddata/
-#       /xcschemes/
-#         (shared scheme name).xcscheme
-#     /xcuserdata/
-#       /(your name)/xcuserdatad/
-#         (private scheme).xcscheme
-#         xcschememanagement.plist
-#
-#
-
-####
-# Xcode 4 - Deprecated classes
-#
-# Allegedly, if you manually "deprecate" your classes, they get moved here.
-#
-# We're using source-control, so this is a "feature" that we do not want!
-
-*.moved-aside
-
-# .xccheckout
-#
-# Per http://stackoverflow.com/questions/18340453/should-xccheckout-files-in-xcode5-be-ignored-under-vcs
-#
-
-*.xccheckout
-
-####
-# Visual Studio Code
-.vscode
-
-####
-# Documentation
-#
-documentation/doxygen/*
-!documentation/doxygen/.gitkeep
-
-
-.idea/*
-projects/*
-/.vs
-CMakeSettings.json
-
-# Weird files created by Linux
-.fuse_hidden*
-
-# This gets ignored by one of the rules above for some reason...
-!/code/scripting/lua/LuaConvert.h
-!/code/debugconsole/
@@ -1,6 +0,0 @@
-[submodule "cmake/external/rpavlik-cmake-modules"]
-	path = cmake/external/rpavlik-cmake-modules
-	url = https://github.com/asarium/cmake-modules.git
-[submodule "lib/libRocket"]
-	path = lib/libRocket
-	url = https://github.com/asarium/libRocket.git
@@ -1,182 +0,0 @@
-language: bash
-sudo: required
-dist: trusty
-cache:
-  directories:
-    - $HOME/cmake-3.8
-    - $HOME/.ccache
-    - $HOME/curl_cache
-addons:
-  apt:
-    packages: &global_deps
-      - ninja-build
-      - libopenal-dev
-      - libreadline6-dev
-      - libpng12-dev
-      - libjpeg62-dev
-      - liblua5.1-0-dev
-      - libjansson-dev
-      - libsdl2-dev
-      - libfreetype6-dev
-      - valgrind
-      - qt57base
-  coverity_scan:
-    project:
-      name: "scp-fs2open/fs2open.github.com"
-    notification_email: [email protected]
-    build_command:   "ci/travis/script.sh"
-    # must match TRAVIS_BRANCH check below
-    branch_pattern: coverity_scan
-env:
-  global:
-    # The next declaration is the encrypted COVERITY_SCAN_TOKEN, created
-    #   via the "travis encrypt" command using the project repo's public key
-    #   also note that fork's don't get access to secure keys
-    #   you have to test using a branch in the main repo
-    - secure: "C3wF967ZeliwwP1vC12EMIBOaC568n26Z/cPnwzn317ve59DWH3YSfPZVgvt08GzmaXITGGsJvPB+qxfGoKvQzYE4O1B73q81RpUe5pB3IhF+ThQ91VfQZIRJR5xEGJaLINUlHTTZGX5jxlkVO9wAcauVj/s3b8sQ3dvUZauPvk="
-    # These declarations set INDIEGAMES_USER and INDIEGAMES_PASSWORD for uploading nightly builds to the indiegames server
-    - secure: "lUuRu8XIi8MKNf1ebOfyC4iVEpPyASojJIDWXRo2bNqEF4ILAljXdkVeXeN6H5yKCHD52cxCNTtyePIG/o3p3QEuGSVud9bDS3D7LaQicLETGGrsw3l07U49gF2OKHXGopg0MzBbZUU9QmhoFTAe8t6PV9NDuEayYCheqvTqjZg="
-    - secure: "E/DHLYcPK/hBUqxBYYlUqp5sjgvIqY5A0qRHyQ4bmjsB+WB/Xx71bGCSiF7hk6lTxar1ZI1i5RAXXh9AIvNVaYAIdEOlCP+q3gvwCYuc5naZEKmkxlUCf0oEL4O9Fye93A/3VkFHuBdC1TGPYYf69m4W5r4367wWO9dPRIdWpJA="
-    # These declarations set FS2DOWNLOADS_USER and FS2DOWNLOADS_PASSWORD
-    - secure: "h6GbMX2jLsW1bS9fCM9fthOSJ1nfQQIRWi6EUH2p8u4NFLD5Bfi/C8JhQPKHUzyo3wvKkSHl+PsW7bgr1oXLusRwAur/dtv2N3imqvtbfIz305b00hZlsvbcYmQmUzQFSAdOGShK57JJ5aKQKccaUBP25KqB7Q+JaqBRdaMBS54="
-    - secure: "fUDAPAUUaaYZy8I4zU3SJ0JcK7aw4eb6eTdaEr7LyNyTMSfPgwY6P1MrbSQC0lJNQIUQ5ffjdxE5g7D7OYpoJF9L14ni4UY8t2QASt7kmpgcYihmjeuYy8FQXgmFG8CTxiWBPKTybZJ7voQcvIvRaNG7b2wM9PMfc5lRIondB6c="
-deploy:
-  - provider: releases
-    api_key:
-      secure: "Wdt4Ccefo7a0ZDjEJQJgpghh7n72FtNJuKSAPUvoz4gtEX6Ct9J8yJI1t9V3jE3CTbbLJ21/Q6eZRDfT7UfNJe5DdepoJsP9DeFhKMWqQCq+AChqQWlm0KeZAffJoJreL8vXYhnRYcLT9ceZHEH6AqwN9TPV+xJziGPISAkYNZ8="
-    skip_cleanup: true
-    file_glob: true
-    file: "/tmp/builds/*"
-    on:
-      condition: '"$RELEASE_BUILD" == true'
-      tags: true
-
-  - provider: script
-    script: bash ci/travis/ftp_deploy.sh
-    on:
-      condition: '"$NIGHTLY_BUILD" == true'
-      tags: true
-
-  - provider: script
-    skip_cleanup: true
-    script: bash ci/travis/ftp_deploy.sh
-    on:
-      condition: $TEST_BUILD = true
-      all_branches: true
-
-matrix:
-  include:
-    # note that gcc Debug MUST be 1st for Coverity
-    - os: linux
-      env: CONFIGURATION="Debug" CC=gcc-5 CXX=g++-5
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - sourceline: 'ppa:beineri/opt-qt571-trusty'
-          packages:
-            - *global_deps
-            - g++-5
-    - os: linux
-      env: CONFIGURATION="Debug" CC=gcc-8 CXX=g++-8
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - sourceline: 'ppa:beineri/opt-qt571-trusty'
-          packages:
-            - g++-8
-            - *global_deps
-    - os: linux
-      env: CONFIGURATION="Debug" CC=clang-4.0 CXX=clang++-4.0 CMAKE_OPTIONS="-DCMAKE_EXPORT_COMPILE_COMMANDS=ON"
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - llvm-toolchain-trusty-4.0
-            - sourceline: 'ppa:beineri/opt-qt571-trusty'
-          packages:
-            - *global_deps
-            - clang-4.0
-            - clang-tidy-4.0
-            - libc++-dev
-      script:
-        - ./ci/travis/script.sh
-        - ./ci/travis/clang_tidy.sh
-    - os: osx
-      env: CONFIGURATION="Debug"
-
-    - os: windows
-      env: CONFIGURATION="Debug" CMAKE_TOOLSET=v141_xp CMAKE_GENERATOR="Visual Studio 15 2017"
-    - os: windows
-      env: CONFIGURATION="Debug" CMAKE_TOOLSET="" CMAKE_GENERATOR="Ninja"
-
-    - os: linux
-      env: CONFIGURATION="Release" CC=gcc-5 CXX=g++-5
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - sourceline: 'ppa:beineri/opt-qt571-trusty'
-          packages:
-            - *global_deps
-            - g++-5
-    - os: linux
-      env: CONFIGURATION="Release" CC=gcc-8 CXX=g++-8
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - sourceline: 'ppa:beineri/opt-qt571-trusty'
-          packages:
-            - g++-8
-            - *global_deps
-    - os: linux
-      env: CONFIGURATION="Release" CC=clang-4.0 CXX=clang++-4.0
-      addons:
-        apt:
-          sources:
-            - ubuntu-toolchain-r-test
-            - llvm-toolchain-trusty-4.0
-            - sourceline: 'ppa:beineri/opt-qt571-trusty'
-          packages:
-            - *global_deps
-            - clang-4.0
-            - libc++-dev
-    - os: osx
-      env: CONFIGURATION="Release"
-
-    - os: windows
-      env: CONFIGURATION="Release" CMAKE_TOOLSET=v141_xp CMAKE_GENERATOR="Visual Studio 15 2017"
-    - os: windows
-      env: CONFIGURATION="Release" CMAKE_TOOLSET="" CMAKE_GENERATOR="Ninja"
-  # As long as Windows is still experimental on Travis CI, allow failures
-  allow_failures:
-    - os: windows
-      env: CONFIGURATION="Debug" CMAKE_TOOLSET=v141_xp CMAKE_GENERATOR="Visual Studio 15 2017"
-    - os: windows
-      env: CONFIGURATION="Debug" CMAKE_TOOLSET="" CMAKE_GENERATOR="Ninja"
-    - os: windows
-      env: CONFIGURATION="Release" CMAKE_TOOLSET=v141_xp CMAKE_GENERATOR="Visual Studio 15 2017"
-    - os: windows
-      env: CONFIGURATION="Release" CMAKE_TOOLSET="" CMAKE_GENERATOR="Ninja"
-  fast_finish: true
-
-before_install:
-  # ugly hack; if running a coverity scan abort all except the 1st build
-  # see note re gcc compiler above needing to be 1st
-  # also note that branch_pattern & the TRAVIS_BRANCH check must match
-  # unfortunately COVERITY_SCAN_BRANCH isn't defined until later in the
-  # build process
-  - if ([[ "${TRAVIS_JOB_NUMBER##*.}" != "1" ]] && [[ "${TRAVIS_BRANCH}" == "coverity_scan" ]]); then false ; fi
-  - source "./ci/travis/check_release.sh"
-  - "./ci/travis/before_install.sh"
-install:
-  - if [ "$TRAVIS_OS_NAME" = "windows" ]; then export PATH="/c/Program Files/CMake/bin":$PATH; fi
-  - "./ci/travis/install.sh"
-  - export PATH=$HOME/cmake-3.6/bin:$PATH
-before_script:
-  - if [ "$TRAVIS_OS_NAME" = "linux" ]; then QT_ENV_SCRIPT=$(find /opt -name 'qt*-env.sh'); source $QT_ENV_SCRIPT; fi
-  - "./ci/travis/before_script.sh"
-script:
-  - if [ "$BUILD_DEPLOYMENT" = true ] ; then ./ci/travis/release.sh ; else ./ci/travis/script.sh ; fi
@@ -1,199 +0,0 @@
-
-CMAKE_MINIMUM_REQUIRED(VERSION 3.4)
-set_property(GLOBAL PROPERTY USE_FOLDERS ON)
-
-# Make sure the source and binary directory are not the sample
-if ("${CMAKE_CURRENT_SOURCE_DIR}" STREQUAL "${CMAKE_CURRENT_BINARY_DIR}")
-	message(FATAL_ERROR "Binary and source directory can not be the same! Choose another build directory.")
-endif()
-
-include(cmake/util.cmake)
-
-# Set a few policies
-set_policy(CMP0051 OLD)
-set_policy(CMP0053 NEW)
-set_policy(CMP0054 NEW)
-
-SET(FSO_PROJECT_DESCRIPTION "Open source project based on the original FreeSpace 2 source code.")
-
-SET(EXECUTABLE_OUTPUT_PATH ${CMAKE_BINARY_DIR}/bin CACHE PATH "Executable output path")
-SET(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/bin CACHE PATH "Library output path")
-
-# CMAKE_INSTALL_PREFIX is defined but also overwritten by the PROJECT command so we need to set it later
-IF(NOT DEFINED CMAKE_INSTALL_PREFIX)
-	SET(RESET_INSTALL_PREFIX TRUE)
-ENDIF(NOT DEFINED CMAKE_INSTALL_PREFIX)
-
-# Reset this variable
-SET(TARGET_COPY_FILES "" CACHE INTERNAL "" FORCE)
-SET(TARGET_COPY_DIRS "" CACHE INTERNAL "" FORCE)
-
-### Define options and editable variables in the section below:
-# This is only needed for single configuration generators so don't annoy others
-if(NOT CMAKE_BUILD_TYPE AND NOT DEFINED CMAKE_CONFIGURATION_TYPES)
-	set(CMAKE_BUILD_TYPE "Release" CACHE STRING "Default build configuration used." FORCE)
-	message(WARNING "CMAKE_BUILD_TYPE was not specified, defaulting to Release configuration.")
-endif(NOT CMAKE_BUILD_TYPE AND NOT DEFINED CMAKE_CONFIGURATION_TYPES)
-
-# Override standard CMake configurations
-set(CMAKE_CONFIGURATION_TYPES Debug Release FastDebug CACHE STRING "Available configurations" FORCE)
-
-PROJECT(FS2_Open)
-
-find_program(CCACHE_PROGRAM ccache)
-# Currently only GCC support ccache properly without generating additional warnings
-if(CCACHE_PROGRAM AND "${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-	message(STATUS "Using ccache for compilation: ${CCACHE_PROGRAM}")
-	set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_PROGRAM}")
-	set_property(GLOBAL PROPERTY RULE_LAUNCH_LINK "${CCACHE_PROGRAM}")
-endif()
-
-IF(CMAKE_CROSSCOMPILING)
-	SET(IMPORT_EXE_DIR "IMPORT_EXE_DIR-NOTFOUND" CACHE FILEPATH "Required for a cross compiling build, point to binary directory of a cmake build for the real OS")
-	INCLUDE(${IMPORT_EXE_DIR}/ImportExecutables.cmake)
-ENDIF(CMAKE_CROSSCOMPILING)
-
-# Check if the external modules exists
-IF(NOT IS_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}/cmake/external/rpavlik-cmake-modules/launcher-templates")
-	message(FATAL_ERROR "External submodules could not be found. Please make sure you have updated your submodules.")
-endif()
-
-LIST(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
-LIST(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake/finder")
-LIST(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake/external/rpavlik-cmake-modules")
-LIST(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake/external/cotire")
-
-IF(RESET_INSTALL_PREFIX)
-	IF(NOT $ENV{FS2PATH} STREQUAL "")
-		IF(NOT IS_DIRECTORY $ENV{FS2PATH})
-			MESSAGE(WARNING "The path '$ENV{FS2PATH}' of the environment variable FS2PATH does not point to a directory! Install prefix wasn't set.")
-		ELSE(NOT IS_DIRECTORY $ENV{FS2PATH})
-			SET(CMAKE_INSTALL_PREFIX "$ENV{FS2PATH}" CACHE FILEPATH "Install path" FORCE)
-			FILE(TO_CMAKE_PATH ${CMAKE_INSTALL_PREFIX} CMAKE_INSTALL_PREFIX)
-		ENDIF(NOT IS_DIRECTORY $ENV{FS2PATH})
-	ELSE(NOT $ENV{FS2PATH} STREQUAL "")
-		MESSAGE(STATUS "NO FS2PATH environment variable found, you can define this to point to your freespace install but it is not required.")
-	ENDIF(NOT $ENV{FS2PATH} STREQUAL "")
-ENDIF(RESET_INSTALL_PREFIX)
-
-IF (WIN32)
-	OPTION(FSO_USE_SPEECH "Use Windows specific text-to-speach libraries" ON)
-
-	OPTION(FSO_USE_VOICEREC "Enable voice recognition support" ON)
-
-	OPTION(FSO_BUILD_FRED2 "Build FRED2 binary" ON)
-elseif(UNIX)
-	option(FSO_BUILD_APPIMAGE "Build an AppImage package" OFF)
-ENDIF(WIN32)
-
-OPTION(FSO_BUILD_TOOLS "Build tools related to FSO" OFF)
-
-OPTION(FSO_BUILD_TESTS "Build unit tests" OFF)
-
-OPTION(FSO_DEVELOPMENT_MODE "Generate binaries in development mode, only use if you know what you're doing!" OFF)
-
-OPTION(FSO_BUILD_QTFRED "Build qtFRED2 binary" OFF)
-
-IF(WIN32 OR APPLE)
-	# On windows and mac the default should be to always build the included libraries
-	SET(FSO_BUILD_INCLUDED_LIBS_DEFAULT ON)
-ELSE()
-	SET(FSO_BUILD_INCLUDED_LIBS_DEFAULT OFF)
-ENDIF()
-
-OPTION(FSO_BUILD_INCLUDED_LIBS "Build and use the included libraries istead of using the system headers and libraries" ${FSO_BUILD_INCLUDED_LIBS_DEFAULT})
-
-OPTION(FSO_USE_LUAJIT "Use LuaJIT for Lua scripting, needs a working internet connection!" OFF)
-
-OPTION(FSO_USE_OPENALSOFT "Download and build OpenAL Soft instead of using the system libraries" OFF)
-
-OPTION(FSO_FATAL_WARNINGS "Determines if warnings in the build are considered fatal errors, primarily used for CI" OFF)
-
-SET(FSO_FREESPACE_PATH "${CMAKE_INSTALL_PREFIX}" CACHE FILEPATH "The path of the FreeSpace directory you want to use. Please note that you will have to change CMAKE_INSTALL_PREFIX if you change this at some point.")
-
-SET(FSO_RUN_ARGUMENTS "" CACHE STRING "Additional arguments passed to a generated executable when run with the generated build files.")
-
-option(FSO_INSTALL_DEBUG_FILES "Install some debug files (currently only PDB files on windows)" OFF)
-
-option(ENABLE_COTIRE "Enable cotire for faster compilation. Enabled by default." ON)
-
-MARK_AS_ADVANCED(FORCE FSO_CMAKE_DEBUG)
-MARK_AS_ADVANCED(FORCE FSO_BUILD_INCLUDED_LIBS)
-MARK_AS_ADVANCED(FORCE FSO_USE_OPENALSOFT)
-MARK_AS_ADVANCED(FORCE FSO_USE_LUAJIT)
-MARK_AS_ADVANCED(FORCE FSO_DEVELOPMENT_MODE)
-MARK_AS_ADVANCED(FORCE FSO_FATAL_WARNINGS)
-mark_as_advanced(FORCE FSO_INSTALL_DEBUG_FILES)
-mark_as_advanced(FORCE ENABLE_COTIRE)
-
-# Include cotire file from https://github.com/sakra/cotire/
-include(cotire)
-
-INCLUDE(globals)
-INCLUDE(toolchain)
-INCLUDE(platforms)
-include(version)
-
-INCLUDE(headers)
-
-SET(GENERATED_SOURCE_DIR ${CMAKE_CURRENT_BINARY_DIR}/generated_source)
-
-include(generateHeaders)
-
-if(FSO_BUILD_APPIMAGE)
-	include(appimage)
-endif()
-
-include(clang-tidy)
-
-# This includes source code for some tools, either used in the build or also for something else
-ADD_SUBDIRECTORY(tools)
-
-ADD_SUBDIRECTORY(lib)
-
-ADD_SUBDIRECTORY(code)
-
-ADD_SUBDIRECTORY(freespace2)
-
-IF(FSO_BUILD_FRED2)
-	ADD_SUBDIRECTORY(fred2)
-ENDIF(FSO_BUILD_FRED2)
-
-IF(FSO_BUILD_QTFRED)
-	ADD_SUBDIRECTORY(qtfred)
-ENDIF()
-
-if(FSO_BUILD_TESTS)
-	add_subdirectory(test)
-endif()
-
-if ("${CMAKE_VERSION}" VERSION_GREATER "3.5")
-	# Default to using Freespace2 as startup project if CMake supports it.
-	set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT Freespace2)
-endif()
-
-IF(MSVC_USE_RUNTIME_DLL)
-	SET(CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION "${BINARY_DESTINATION}")
-
-	IF(FSO_BUILD_FRED2)
-		SET(CMAKE_INSTALL_MFC_LIBRARIES ON)
-	ENDIF(FSO_BUILD_FRED2)
-
-	INCLUDE(InstallRequiredSystemLibraries)
-ENDIF(MSVC_USE_RUNTIME_DLL)
-
-include(package)
-
-include(doxygen)
-
-# Print used options to log
-IF (WIN32)
-	message(STATUS "Using text to speech: ${FSO_USE_SPEECH}")
-	message(STATUS "Using voice recogition: ${FSO_USE_VOICEREC}")
-	message(STATUS "Building FRED2: ${FSO_BUILD_FRED2}")
-elseif(UNIX)
-	message(STATUS "Building AppImage: ${FSO_BUILD_APPIMAGE}")
-ENDIF()
-message(STATUS "Building FSO tools: ${FSO_BUILD_TOOLS}")
-message(STATUS "Building qtFRED: ${FSO_BUILD_QTFRED}")
-message(STATUS "Fatal warnings: ${FSO_FATAL_WARNINGS}")
@@ -1,26 +1,6 @@
 ChangeLog for fs2_open.  All times are UTC.  
+Updated 2002-10-31 03:46

-Features: September 2013
-http://www.hard-light.net/forums/index.php?topic=85700.0
-
- show-subtitle-text can now display messages as well as raw text - Goober5000
- toggle subsytem scanning, scannable, cargo revealed, hidden from sensors, stealth and friendly stealth added to the alter-ship-flag sexp - karajorma
- Support added to add more languages besides English, French, German and Polish, leading the way to better localization! - karajorma
- event.log can now snapshot events checked in a frame and record the status of an event the previous time it was checked as well as the current state - karajorma
- added a player-is-cheating sexp - The E
- allow a user-specified number of credit images - Goober5000
- allow the specification of the positions of medals, callsigns and labels on the medal screen. - Goober5000
- lua function to check if a ship is warp capable, and access to a ship's auto-aim FOV - zookeeper
- is-facing now works for things that aren't ships (like waypoints!) - zookeeper
- experimental configurations to make AVX builds (see this post for more explainations) - The E
- new ship flag to enable smarter AI use of afterburners. Now it can use them while flying waypoints or attacking capital ships (use the free-afterburner-use flag with alter-ship-flag) - Admiral MS
- the number of medals is now dynamic! - Goober5000
- frame profiling code, see what exactly is slowing down FreeSpace. (Mostly for devs or coders) - Swifty + The E
- allowing fade-in and fade-out sexps to use any color, not just black, white and red. - Goober5000
-
-==================================================================
-( massive gap in updates, maybe this will be filled in someday...)
-==================================================================

 2002-10-30 22:57  randomtiger

@@ -0,0 +1,77 @@
+# Makefile.am for fs2_open (top level)
+#
+# This file uses GNU Automake to generate makefiles
+
+SUBDIRS = code
+
+
+EXTRA_DIST =	\
+	FS2OpenSCPReadMe.doc	\
+	projects/MSVC_2005/Freespace2.sln	\
+	projects/MSVC_2005/Freespace2.vcproj	\
+	projects/MSVC_2005/code.vcproj	\
+	projects/MSVC_6/Fred2.dsp	\
+	projects/MSVC_6/Freespace2.dsp	\
+	projects/MSVC_6/Freespace2.dsw	\
+	projects/MSVC_6/code.dsp	\
+	projects/MSVC_6/libjpeg.dsp	\
+	projects/MSVC_6/liblua.dsp	\
+	projects/MSVC_6/wxFRED2.dsp	\
+	projects/Xcode/English.lproj/InfoPlist.strings	\
+	projects/Xcode/FS2_Open.icns	\
+	projects/Xcode/FS2_Open.xcodeproj/project.pbxproj	\
+	projects/Xcode/Frameworks.tgz	\
+	projects/Xcode/Info-debug.plist	\
+	projects/Xcode/Info.plist	\
+	projects/Xcode/README.Xcode	\
+	projects/Xcode/SDLMain.h	\
+	projects/Xcode/SDLMain.m
+
+
+# D_ variants are defaults and should always be used
+AM_CXXFLAGS = -I./code @D_CFLAGS@
+AM_LDFLAGS = @D_LDFLAGS@
+
+EXTRA_PROGRAMS = cfilearchiver cfileextractor cryptstring scramble
+
+###############################################################################
+##
+## Begin utilitites
+##
+
+# cfilearchiver -- to create VPs
+cfilearchiver_SOURCES =	\
+	code/cfilearchiver/cfilearchiver.cpp
+
+# cfileextractor -- to extract files from VPs
+cfileextractor_SOURCES = \
+	code/cfileextractor/cfileextractor.cpp
+
+# cryptstring -- to encrypt strings that are used as cheat codes
+cryptstring_SOURCES =	\
+	code/cryptstring/cryptstring.cpp
+
+# scramble -- to encrypt tables
+scramble_SOURCES =	\
+	code/parse/encrypt.cpp	\
+	code/scramble/scramble.cpp	\
+	code/scramble/scramble.h
+
+
+# catch all to build utilitites
+tools: cfilearchiver cfileextractor cryptstring scramble
+
+
+# cleaning
+clean-tools:
+	-test -z "$(EXTRA_PROGRAMS)" || rm -f $(EXTRA_PROGRAMS)
+
+##
+## End utilitites
+##
+###############################################################################
+
+
+# make sure we get this stuff cleaned up
+clean-generic: clean-tools
+
@@ -0,0 +1,8 @@
+The "projects" directory contains ready projects for:
+Microsoft Visual C++ 6
+Microsoft Visual C++ 2005
+Anjuta 1 (please see README with project before using)
+
+
+See the ChangeLog to see what's new.
+See the INSTALL file for instructions on how to build fs2_open.
@@ -1,42 +0,0 @@
-FreeSpace2 *S*ource *C*ode *P*roject
-==
-[![Travis-CI Build Status](https://travis-ci.org/scp-fs2open/fs2open.github.com.svg?branch=master)](https://travis-ci.org/scp-fs2open/fs2open.github.com)
-[![AppVeyor Build Status](https://ci.appveyor.com/api/projects/status/github/scp-fs2open/fs2open.github.com?branch=master&svg=true)](https://ci.appveyor.com/project/SirKnightly/fs2open-github-com/branch/master)
-[![Coverity](https://img.shields.io/coverity/scan/870.svg)](https://scan.coverity.com/projects/870)
-
-Building
--
-Before you do anything, make sure you have updated your git submodules, either by running `git submodule update --init --recursive` or by cloning the repository with the `--recursive` flag.<br/>
-<br/>
-For building you will need [CMake](http://www.cmake.org/cmake/resources/software.html). Version 3.4 is required. Once you have installed CMake you should create a build directory where the project/make files should be created, **do not create them inside the source tree!**<br>
-<br>
-On Windows you can use the `cmake-gui` executable to get a nice GUI, on Unix just use `cmake`. Use the newly created directory as build directory (change to this directory on Unix) and run cmake. On Windows this can be done by clicking the `Configure` button. Choose your compiler version and hit `Generate` when configuring is done. <br>
-Depending on the makefile generator used build the `all` or `ALL_BUILD` target to compile the project.<br>
-
-### Available variables to control the build
-* `FSO_BUILD_WXFRED2`: Build the wxfred2 project, requires wxWidgets
-* `FSO_FREESPACE_PATH`: Sets the path of your FreeSpace install, can be used to automatically run the generated executables with the correct working directory, this is an optional variable. By default this will use the value of the `FS2PATH` environment variable.
-* `FSO_BUILD_TOOLS`: Build some tools related to FSO
-* `CMAKE_BUILD_TYPE`: Sets the binary build type between `Debug` and `Release` (default)
-
-#### Windows only variables
-* `FSO_BUILD_FRED2`: Build FRED2, requires a Visual Studio version that ships with MFC
-* `FSO_USE_SPEECH`: Build a binary with text-to-speech support
-* `FSO_USE_VOICEREC`: Build a binary with voice recognition support
-
-#### Advanced variables
-You should only use these variables if you know what you're doing
-* `FSO_CMAKE_DEBUG`: Print CMake debugging informations
-* `FSO_BUILD_INCLUDED_LIBS`: Build libraries from the included source
-* `FSO_USE_OPENALSOFT`: Use [OpenALSoft](http://kcat.strangesoft.net/openal.html) for OpenAL support
-* `FSO_USE_LUAJIT`: Use [luajit](http://luajit.org/) as a replacement for lua
-* `FSO_DEVELOPMENT_MODE`: Toggles some development behavior, only use if you really need it.
-* `FSO_RUN_ARGUMENTS`: If you run an executable from within the project, these arguments will also be passed to the executable
-* `FSO_BUILD_POSTFIX`: Sets a postfix to be added to the executable name, may be useful for release candidates.
-
-#### Visual Studio specific variables
-* `MSVC_USE_RUNTIME_DLL`: Use the DLL version of the runtime, experimental and not well tested.
-* `MSVC_SIMD_INSTRUCTIONS`: The instruction set the executables will be optimized for.
-
-### Generating an installation package
-CMake can automatically generate installation packages of the project. To do this you will just need to run the `package` target of the build system and the package will be placed inside your build directory. On Windows you will have to install [NSIS](http://nsis.sourceforge.net/Main_Page) to use this.
@@ -0,0 +1,714 @@
+# Configure paths for SDL
+# Sam Lantinga 9/21/99
+# stolen from Manish Singh
+# stolen back from Frank Belew
+# stolen from Manish Singh
+# Shamelessly stolen from Owen Taylor
+
+dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
+dnl
+AC_DEFUN([AM_PATH_SDL],
+[dnl 
+dnl Get the cflags and libraries from the sdl-config script
+dnl
+AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
+            sdl_prefix="$withval", sdl_prefix="")
+AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
+            sdl_exec_prefix="$withval", sdl_exec_prefix="")
+AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
+		    , enable_sdltest=yes)
+
+  if test x$sdl_exec_prefix != x ; then
+     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
+     if test x${SDL_CONFIG+set} != xset ; then
+        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
+     fi
+  fi
+  if test x$sdl_prefix != x ; then
+     sdl_args="$sdl_args --prefix=$sdl_prefix"
+     if test x${SDL_CONFIG+set} != xset ; then
+        SDL_CONFIG=$sdl_prefix/bin/sdl-config
+     fi
+  fi
+
+  AC_REQUIRE([AC_CANONICAL_TARGET])
+  PATH="$prefix/bin:$prefix/usr/bin:$PATH"
+  AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
+  min_sdl_version=ifelse([$1], ,0.11.0,$1)
+  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
+  no_sdl=""
+  if test "$SDL_CONFIG" = "no" ; then
+    no_sdl=yes
+  else
+    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
+    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
+
+    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_sdltest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_CXXFLAGS="$CXXFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $SDL_CFLAGS"
+      CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
+      LIBS="$LIBS $SDL_LIBS"
+dnl
+dnl Now check if the installed SDL is sufficiently new. (Also sanity
+dnl checks the results of sdl-config to some extent
+dnl
+      rm -f conf.sdltest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "SDL.h"
+
+char*
+my_strdup (char *str)
+{
+  char *new_str;
+  
+  if (str)
+    {
+      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
+      strcpy (new_str, str);
+    }
+  else
+    new_str = NULL;
+  
+  return new_str;
+}
+
+int main (int argc, char *argv[])
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  /* This hangs on some systems (?)
+  system ("touch conf.sdltest");
+  */
+  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = my_strdup("$min_sdl_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_sdl_version");
+     exit(1);
+   }
+
+   if (($sdl_major_version > major) ||
+      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
+      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
+    {
+      return 0;
+    }
+  else
+    {
+      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
+      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
+      printf("*** best to upgrade to the required version.\n");
+      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
+      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
+      printf("*** config.cache before re-running configure\n");
+      return 1;
+    }
+}
+
+],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       CXXFLAGS="$ac_save_CXXFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_sdl" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$SDL_CONFIG" = "no" ; then
+       echo "*** The sdl-config script installed by SDL could not be found"
+       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the SDL_CONFIG environment variable to the"
+       echo "*** full path to sdl-config."
+     else
+       if test -f conf.sdltest ; then
+        :
+       else
+          echo "*** Could not run SDL test program, checking why..."
+          CFLAGS="$CFLAGS $SDL_CFLAGS"
+          CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
+          LIBS="$LIBS $SDL_LIBS"
+          AC_TRY_LINK([
+#include <stdio.h>
+#include "SDL.h"
+
+int main(int argc, char *argv[])
+{ return 0; }
+#undef  main
+#define main K_and_R_C_main
+],      [ return 0; ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding SDL or finding the wrong"
+          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
+          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
+          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          CXXFLAGS="$ac_save_CXXFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     SDL_CFLAGS=""
+     SDL_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(SDL_CFLAGS)
+  AC_SUBST(SDL_LIBS)
+  rm -f conf.sdltest
+])
+
+
+dnl ---------------------------------------------------------------------------
+dnl Macros for wxWindows detection. Typically used in configure.in as:
+dnl
+dnl 	AC_ARG_ENABLE(...)
+dnl 	AC_ARG_WITH(...)
+dnl	...
+dnl	AM_OPTIONS_WXCONFIG
+dnl	...
+dnl	...
+dnl	AM_PATH_WXCONFIG(2.3.4, wxWin=1)
+dnl     if test "$wxWin" != 1; then
+dnl        AC_MSG_ERROR([
+dnl     	   wxWindows must be installed on your system
+dnl     	   but wx-config script couldn't be found.
+dnl     
+dnl     	   Please check that wx-config is in path, the directory
+dnl     	   where wxWindows libraries are installed (returned by
+dnl     	   'wx-config --libs' command) is in LD_LIBRARY_PATH or
+dnl     	   equivalent variable and wxWindows version is 2.3.4 or above.
+dnl        ])
+dnl     fi
+dnl     CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
+dnl     CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
+dnl     CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
+dnl     
+dnl     LDFLAGS="$LDFLAGS $WX_LIBS"
+dnl ---------------------------------------------------------------------------
+
+dnl ---------------------------------------------------------------------------
+dnl AM_OPTIONS_WXCONFIG
+dnl
+dnl adds support for --wx-prefix, --wx-exec-prefix and --wx-config 
+dnl command line options
+dnl ---------------------------------------------------------------------------
+
+AC_DEFUN([AM_OPTIONS_WXCONFIG],
+[
+   AC_ARG_WITH(wx-prefix, [  --with-wx-prefix=PREFIX   Prefix where wxWindows is installed (optional)],
+               wx_config_prefix="$withval", wx_config_prefix="")
+   AC_ARG_WITH(wx-exec-prefix,[  --with-wx-exec-prefix=PREFIX Exec prefix where wxWindows is installed (optional)],
+               wx_config_exec_prefix="$withval", wx_config_exec_prefix="")
+   AC_ARG_WITH(wx-config,[  --with-wx-config=CONFIG   wx-config script to use (optional)],
+               wx_config_name="$withval", wx_config_name="")
+])
+
+dnl ---------------------------------------------------------------------------
+dnl AM_PATH_WXCONFIG(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl
+dnl Test for wxWindows, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
+dnl (the latter is for static linking against wxWindows). Set WX_CONFIG_NAME
+dnl environment variable to override the default name of the wx-config script
+dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this
+dnl case the macro won't even waste time on tests for its existence.
+dnl ---------------------------------------------------------------------------
+
+dnl
+dnl Get the cflags and libraries from the wx-config script
+dnl
+AC_DEFUN([AM_PATH_WXCONFIG],
+[
+  dnl do we have wx-config name: it can be wx-config or wxd-config or ...
+  if test x${WX_CONFIG_NAME+set} != xset ; then
+     WX_CONFIG_NAME=wx-config
+  fi
+  if test "x$wx_config_name" != x ; then
+     WX_CONFIG_NAME="$wx_config_name"
+  fi
+
+  dnl deal with optional prefixes
+  if test x$wx_config_exec_prefix != x ; then
+     wx_config_args="$wx_config_args --exec-prefix=$wx_config_exec_prefix"
+     WX_LOOKUP_PATH="$wx_config_exec_prefix/bin"
+  fi
+  if test x$wx_config_prefix != x ; then
+     wx_config_args="$wx_config_args --prefix=$wx_config_prefix"
+     WX_LOOKUP_PATH="$WX_LOOKUP_PATH:$wx_config_prefix/bin"
+  fi
+
+  dnl don't search the PATH if WX_CONFIG_NAME is absolute filename
+  if test -x "$WX_CONFIG_NAME" ; then
+     AC_MSG_CHECKING(for wx-config)
+     WX_CONFIG_PATH="$WX_CONFIG_NAME"
+     AC_MSG_RESULT($WX_CONFIG_PATH)
+  else
+     AC_PATH_PROG(WX_CONFIG_PATH, $WX_CONFIG_NAME, no, "$WX_LOOKUP_PATH:$PATH")
+  fi
+
+  if test "$WX_CONFIG_PATH" != "no" ; then
+    WX_VERSION=""
+    no_wx=""
+
+    min_wx_version=ifelse([$1], ,2.2.1,$1)
+    AC_MSG_CHECKING(for wxWindows version >= $min_wx_version)
+
+    WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args"
+
+    WX_VERSION=`$WX_CONFIG_WITH_ARGS --version`
+    wx_config_major_version=`echo $WX_VERSION | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    wx_config_minor_version=`echo $WX_VERSION | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    wx_config_micro_version=`echo $WX_VERSION | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+
+    wx_requested_major_version=`echo $min_wx_version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    wx_requested_minor_version=`echo $min_wx_version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    wx_requested_micro_version=`echo $min_wx_version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+
+    wx_ver_ok=""
+    if test $wx_config_major_version -gt $wx_requested_major_version; then
+      wx_ver_ok=yes
+    else
+      if test $wx_config_major_version -eq $wx_requested_major_version; then
+         if test $wx_config_minor_version -gt $wx_requested_minor_version; then
+            wx_ver_ok=yes
+         else
+            if test $wx_config_minor_version -eq $wx_requested_minor_version; then
+               if test $wx_config_micro_version -ge $wx_requested_micro_version; then
+                  wx_ver_ok=yes
+               fi
+            fi
+         fi
+      fi
+    fi
+
+    if test "x$wx_ver_ok" = x ; then
+      no_wx=yes
+    else
+      WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs`
+      WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs`
+
+      dnl starting with version 2.2.6 wx-config has --cppflags argument
+      wx_has_cppflags=""
+      if test $wx_config_major_version -gt 2; then
+        wx_has_cppflags=yes
+      else
+        if test $wx_config_major_version -eq 2; then
+           if test $wx_config_minor_version -gt 2; then
+              wx_has_cppflags=yes
+           else
+              if test $wx_config_minor_version -eq 2; then
+                 if test $wx_config_micro_version -ge 6; then
+                    wx_has_cppflags=yes
+                 fi
+              fi
+           fi
+        fi
+      fi
+
+      if test "x$wx_has_cppflags" = x ; then
+         dnl no choice but to define all flags like CFLAGS
+         WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags`
+         WX_CPPFLAGS=$WX_CFLAGS
+         WX_CXXFLAGS=$WX_CFLAGS
+
+         WX_CFLAGS_ONLY=$WX_CFLAGS
+         WX_CXXFLAGS_ONLY=$WX_CFLAGS
+      else
+         dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS
+         WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags`
+         WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags`
+         WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags`
+
+         WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"`
+         WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"`
+      fi
+    fi
+
+    if test "x$no_wx" = x ; then
+       AC_MSG_RESULT(yes (version $WX_VERSION))
+       ifelse([$2], , :, [$2])
+    else
+       if test "x$WX_VERSION" = x; then
+	  dnl no wx-config at all
+	  AC_MSG_RESULT(no)
+       else
+	  AC_MSG_RESULT(no (version $WX_VERSION is not new enough))
+       fi
+
+       WX_CFLAGS=""
+       WX_CPPFLAGS=""
+       WX_CXXFLAGS=""
+       WX_LIBS=""
+       WX_LIBS_STATIC=""
+       ifelse([$3], , :, [$3])
+    fi
+  fi
+
+  AC_SUBST(WX_CPPFLAGS)
+  AC_SUBST(WX_CFLAGS)
+  AC_SUBST(WX_CXXFLAGS)
+  AC_SUBST(WX_CFLAGS_ONLY)
+  AC_SUBST(WX_CXXFLAGS_ONLY)
+  AC_SUBST(WX_LIBS)
+  AC_SUBST(WX_LIBS_STATIC)
+  AC_SUBST(WX_VERSION)
+])
+
+# Configure paths for libogg
+# Jack Moffitt <[email protected]> 10-21-2000
+# Shamelessly stolen from Owen Taylor and Manish Singh
+
+dnl XIPH_PATH_OGG([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl Test for libogg, and define OGG_CFLAGS and OGG_LIBS
+dnl
+AC_DEFUN([XIPH_PATH_OGG],
+[dnl 
+dnl Get the cflags and libraries
+dnl
+AC_ARG_WITH(ogg,[  --with-ogg=PFX   Prefix where libogg is installed (optional)], ogg_prefix="$withval", ogg_prefix="")
+AC_ARG_WITH(ogg-libraries,[  --with-ogg-libraries=DIR   Directory where libogg library is installed (optional)], ogg_libraries="$withval", ogg_libraries="")
+AC_ARG_WITH(ogg-includes,[  --with-ogg-includes=DIR   Directory where libogg header files are installed (optional)], ogg_includes="$withval", ogg_includes="")
+AC_ARG_ENABLE(oggtest, [  --disable-oggtest       Do not try to compile and run a test Ogg program],, enable_oggtest=yes)
+
+  if test "x$ogg_libraries" != "x" ; then
+    OGG_LIBS="-L$ogg_libraries"
+  elif test "x$ogg_prefix" != "x" ; then
+    OGG_LIBS="-L$ogg_prefix/lib"
+  elif test "x$prefix" != "xNONE" ; then
+    OGG_LIBS="-L$libdir"
+  fi
+
+  OGG_LIBS="$OGG_LIBS -logg"
+
+  if test "x$ogg_includes" != "x" ; then
+    OGG_CFLAGS="-I$ogg_includes"
+  elif test "x$ogg_prefix" != "x" ; then
+    OGG_CFLAGS="-I$ogg_prefix/include"
+  elif test "x$prefix" != "xNONE"; then
+    OGG_CFLAGS=""
+  fi
+
+  AC_MSG_CHECKING(for Ogg)
+  no_ogg=""
+
+
+  if test "x$enable_oggtest" = "xyes" ; then
+    ac_save_CFLAGS="$CFLAGS"
+    ac_save_LIBS="$LIBS"
+    CFLAGS="$CFLAGS $OGG_CFLAGS"
+    LIBS="$LIBS $OGG_LIBS"
+dnl
+dnl Now check if the installed Ogg is sufficiently new.
+dnl
+      rm -f conf.oggtest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ogg/ogg.h>
+
+int main ()
+{
+  system("touch conf.oggtest");
+  return 0;
+}
+
+],, no_ogg=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+  fi
+
+  if test "x$no_ogg" = "x" ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$1], , :, [$1])     
+  else
+     AC_MSG_RESULT(no)
+     if test -f conf.oggtest ; then
+       :
+     else
+       echo "*** Could not run Ogg test program, checking why..."
+       CFLAGS="$CFLAGS $OGG_CFLAGS"
+       LIBS="$LIBS $OGG_LIBS"
+       AC_TRY_LINK([
+#include <stdio.h>
+#include <ogg/ogg.h>
+],     [ return 0; ],
+       [ echo "*** The test program compiled, but did not run. This usually means"
+       echo "*** that the run-time linker is not finding Ogg or finding the wrong"
+       echo "*** version of Ogg. If it is not finding Ogg, you'll need to set your"
+       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+       echo "*** is required on your system"
+       echo "***"
+       echo "*** If you have an old version installed, it is best to remove it, although"
+       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+       [ echo "*** The test program failed to compile or link. See the file config.log for the"
+       echo "*** exact error that occured. This usually means Ogg was incorrectly installed"
+       echo "*** or that you have moved Ogg since it was installed." ])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+     OGG_CFLAGS=""
+     OGG_LIBS=""
+     ifelse([$2], , :, [$2])
+  fi
+  AC_SUBST(OGG_CFLAGS)
+  AC_SUBST(OGG_LIBS)
+  rm -f conf.oggtest
+])
+
+# Configure paths for libvorbis
+# Jack Moffitt <[email protected]> 10-21-2000
+# Shamelessly stolen from Owen Taylor and Manish Singh
+# thomasvs added check for vorbis_bitrate_addblock which is new in rc3
+
+dnl XIPH_PATH_VORBIS([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl Test for libvorbis, and define VORBIS_CFLAGS and VORBIS_LIBS
+dnl
+AC_DEFUN([XIPH_PATH_VORBIS],
+[dnl 
+dnl Get the cflags and libraries
+dnl
+AC_ARG_WITH(vorbis,[  --with-vorbis=PFX   Prefix where libvorbis is installed (optional)], vorbis_prefix="$withval", vorbis_prefix="")
+AC_ARG_WITH(vorbis-libraries,[  --with-vorbis-libraries=DIR   Directory where libvorbis library is installed (optional)], vorbis_libraries="$withval", vorbis_libraries="")
+AC_ARG_WITH(vorbis-includes,[  --with-vorbis-includes=DIR   Directory where libvorbis header files are installed (optional)], vorbis_includes="$withval", vorbis_includes="")
+AC_ARG_ENABLE(vorbistest, [  --disable-vorbistest       Do not try to compile and run a test Vorbis program],, enable_vorbistest=yes)
+
+  if test "x$vorbis_libraries" != "x" ; then
+    VORBIS_LIBS="-L$vorbis_libraries"
+  elif test "x$vorbis_prefix" != "x" ; then
+    VORBIS_LIBS="-L$vorbis_prefix/lib"
+  elif test "x$prefix" != "xNONE"; then
+    VORBIS_LIBS="-L$libdir"
+  fi
+
+  VORBIS_LIBS="$VORBIS_LIBS -lvorbis -lm"
+  VORBISFILE_LIBS="-lvorbisfile"
+  VORBISENC_LIBS="-lvorbisenc"
+
+  if test "x$vorbis_includes" != "x" ; then
+    VORBIS_CFLAGS="-I$vorbis_includes"
+  elif test "x$vorbis_prefix" != "x" ; then
+    VORBIS_CFLAGS="-I$vorbis_prefix/include"
+  elif test "x$prefix" != "xNONE"; then
+    VORBIS_CFLAGS=""
+  fi
+
+
+  AC_MSG_CHECKING(for Vorbis)
+  no_vorbis=""
+
+
+  if test "x$enable_vorbistest" = "xyes" ; then
+    ac_save_CFLAGS="$CFLAGS"
+    ac_save_LIBS="$LIBS"
+    CFLAGS="$CFLAGS $VORBIS_CFLAGS $OGG_CFLAGS"
+    LIBS="$LIBS $VORBIS_LIBS $VORBISENC_LIBS $OGG_LIBS"
+dnl
+dnl Now check if the installed Vorbis is sufficiently new.
+dnl
+      rm -f conf.vorbistest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <vorbis/codec.h>
+#include <vorbis/vorbisenc.h>
+
+int main ()
+{
+    vorbis_block 	vb;
+    vorbis_dsp_state	vd;
+    vorbis_info		vi;
+
+    vorbis_info_init (&vi);
+    vorbis_encode_init (&vi, 2, 44100, -1, 128000, -1);
+    vorbis_analysis_init (&vd, &vi);
+    vorbis_block_init (&vd, &vb);
+    /* this function was added in 1.0rc3, so this is what we're testing for */
+    vorbis_bitrate_addblock (&vb);
+
+    system("touch conf.vorbistest");
+    return 0;
+}
+
+],, no_vorbis=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+  fi
+
+  if test "x$no_vorbis" = "x" ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$1], , :, [$1])     
+  else
+     AC_MSG_RESULT(no)
+     if test -f conf.vorbistest ; then
+       :
+     else
+       echo "*** Could not run Vorbis test program, checking why..."
+       CFLAGS="$CFLAGS $VORBIS_CFLAGS"
+       LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS"
+       AC_TRY_LINK([
+#include <stdio.h>
+#include <vorbis/codec.h>
+],     [ return 0; ],
+       [ echo "*** The test program compiled, but did not run. This usually means"
+       echo "*** that the run-time linker is not finding Vorbis or finding the wrong"
+       echo "*** version of Vorbis. If it is not finding Vorbis, you'll need to set your"
+       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+       echo "*** is required on your system"
+       echo "***"
+       echo "*** If you have an old version installed, it is best to remove it, although"
+       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+       [ echo "*** The test program failed to compile or link. See the file config.log for the"
+       echo "*** exact error that occured. This usually means Vorbis was incorrectly installed"
+       echo "*** or that you have moved Vorbis since it was installed." ])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+     VORBIS_CFLAGS=""
+     VORBIS_LIBS=""
+     VORBISFILE_LIBS=""
+     VORBISENC_LIBS=""
+     ifelse([$2], , :, [$2])
+  fi
+  AC_SUBST(VORBIS_CFLAGS)
+  AC_SUBST(VORBIS_LIBS)
+  AC_SUBST(VORBISFILE_LIBS)
+  AC_SUBST(VORBISENC_LIBS)
+  rm -f conf.vorbistest
+])
+
+dnl XIPH_PATH_THEORA([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
+dnl Test for libtheora, and define THEORA_CFLAGS and THEORA_LIBS
+dnl
+AC_DEFUN([XIPH_PATH_THEORA],
+[dnl 
+dnl Get the cflags and libraries
+dnl
+AC_ARG_WITH(theora,[  --with-theora=PFX   Prefix where libtheora is installed (optional)], theora_prefix="$withval", theora_prefix="")
+AC_ARG_WITH(theora-libraries,[  --with-theora-libraries=DIR   Directory where libtheora library is installed (optional)], theora_libraries="$withval", theora_libraries="")
+AC_ARG_WITH(theora-includes,[  --with-theora-includes=DIR   Directory where libtheora header files are installed (optional)], theora_includes="$withval", theora_includes="")
+AC_ARG_ENABLE(theoratest, [  --disable-theoratest       Do not try to compile and run a test Theora program],, enable_theoratest=yes)
+
+  if test "x$theora_libraries" != "x" ; then
+    THEORA_LIBS="-L$theora_libraries"
+  elif test "x$theora_prefix" != "x" ; then
+    THEORA_LIBS="-L$theora_prefix/lib"
+  elif test "x$prefix" != "xNONE"; then
+    THEORA_LIBS="-L$libdir"
+  fi
+
+  THEORA_LIBS="$THEORA_LIBS -ltheora"
+
+  if test "x$theora_includes" != "x" ; then
+    THEORA_CFLAGS="-I$theora_includes"
+  elif test "x$theora_prefix" != "x" ; then
+    THEORA_CFLAGS="-I$theora_prefix/include"
+  elif test "x$prefix" != "xNONE"; then
+    THEORA_CFLAGS=""
+  fi
+
+
+  AC_MSG_CHECKING(for Theora)
+  no_theora=""
+
+
+  if test "x$enable_theoratest" = "xyes" ; then
+    ac_save_CFLAGS="$CFLAGS"
+    ac_save_LIBS="$LIBS"
+    CFLAGS="$CFLAGS $THEORA_CFLAGS $OGG_CFLAGS"
+    LIBS="$LIBS $THEORA_LIBS $OGG_LIBS"
+dnl
+dnl Now check if the installed Theora is sufficiently new.
+dnl
+      rm -f conf.theoratest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <theora/theora.h>
+#include <vorbis/codec.h>
+
+int main ()
+{
+    theora_info		ti;
+    theora_state	ts;
+
+    theora_info_init(&ti);
+
+    system("touch conf.theoratest");
+    return 0;
+}
+
+],, no_theora=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+  fi
+
+  if test "x$no_theora" = "x" ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$1], , :, [$1])     
+  else
+     AC_MSG_RESULT(no)
+     if test -f conf.theoratest ; then
+       :
+     else
+       echo "*** Could not run Theora test program, checking why..."
+       CFLAGS="$CFLAGS $THEORA_CFLAGS"
+       LIBS="$LIBS $THEORA_LIBS $OGG_LIBS"
+       AC_TRY_LINK([
+#include <stdio.h>
+#include <vorbis/codec.h>
+],     [ return 0; ],
+       [ echo "*** The test program compiled, but did not run. This usually means"
+       echo "*** that the run-time linker is not finding Theora or finding the wrong"
+       echo "*** version of Theora. If it is not finding Theora, you'll need to set your"
+       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+       echo "*** is required on your system"
+       echo "***"
+       echo "*** If you have an old version installed, it is best to remove it, although"
+       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+       [ echo "*** The test program failed to compile or link. See the file config.log for the"
+       echo "*** exact error that occured. This usually means Theora was incorrectly installed"
+       echo "*** or that you have moved Theora since it was installed." ])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+     THEORA_CFLAGS=""
+     THEORA_LIBS=""
+     ifelse([$2], , :, [$2])
+  fi
+  AC_SUBST(THEORA_CFLAGS)
+  AC_SUBST(THEORA_LIBS)
+  rm -f conf.theoratest
+])
@@ -1,64 +0,0 @@
-version: 1.0.0.{build}
-image: Visual Studio 2015
-configuration:
-  - Debug
-  - Release
-clone_depth: 10
-environment:
-  matrix:
-    - BuildID: 0
-      CMAKE_GENERATOR: Visual Studio 14 2015
-      PlatformToolset: v140_xp
-      QT_DIR: C:\Qt\5.9\msvc2015
-    - BuildID: 1
-      CMAKE_GENERATOR: Visual Studio 14 2015 Win64
-      PlatformToolset: v140_xp
-      QT_DIR: C:\Qt\5.9\msvc2015_64
-before_build:
-  - git submodule update --init --recursive
-build_script:
-  - ps: . $Env:APPVEYOR_BUILD_FOLDER/ci/appveyor/build.ps1
-test_script:
-  - ps: . $Env:APPVEYOR_BUILD_FOLDER/ci/appveyor/test.ps1
-
-deploy:
-    - provider: GitHub
-      auth_token:
-          secure: 3kV4efHXwRnfXzmJPRAOs8D7+MhwXUXYeayI/P5y114L09kJa6b6L70beXdW7yYr
-      on:
-          ReleaseBuild: true        # deploy on release push only
-
-    - provider: FTP
-      protocol: sftp
-      host: scp.indiegames.us
-      username:
-        secure: SFivQZfatqWHXK1ijYK3GQ==
-      password:
-        secure: q6Zk/412o1ri+NEya1dl1Q==
-      folder: public_html/builds/nightly/$(VersionName)
-      on:
-          NightlyBuild: true        # deploy on nightly push only
-
-    - provider: FTP
-      protocol: ftp
-      host: swc.fs2downloads.com
-      username: 
-        secure: EXg2ADoKzMduZF90ip2Q0g==
-      password:
-        secure: x0LL0uY9yBAQ7JTARhQ6AA==
-      folder: swc.fs2downloads.com/builds/nightly/$(VersionName)
-      beta: true
-      on:
-          NightlyBuild: true        # deploy on nightly push only
-
-    - provider: FTP
-      protocol: ftp
-      host: swc.fs2downloads.com
-      username: 
-        secure: EXg2ADoKzMduZF90ip2Q0g==
-      password:
-        secure: x0LL0uY9yBAQ7JTARhQ6AA==
-      folder: swc.fs2downloads.com/builds/test/$(VersionName)
-      beta: true
-      on:
-          TestBuild: true        # deploy on test build push only
@@ -0,0 +1,137 @@
+#!/bin/sh
+# Run this to generate all the initial makefiles, etc.
+
+srcdir=`dirname $0`
+PKG_NAME="fs2_open"
+
+# check the version of a package
+check_version() {
+  COMMAND=$1
+  MAJOR=$2
+  MINOR=$3
+  MICRO=$4
+
+  ($COMMAND --version) </dev/null >/dev/null 2>&1 || return 1
+
+  ver=`$COMMAND --version|head -n 1|sed 's/^.*) //'|sed 's/ (.*)//'`
+  major=`echo $ver | cut -d. -f1 | sed s/[a-zA-Z\-].*//g`
+  minor=`echo $ver | cut -d. -f2 | sed s/[a-zA-Z\-].*//g`
+  micro=`echo $ver | cut -d. -f3 | sed s/[a-zA-Z\-].*//g`
+  test -z "$major" && major=0
+  test -z "$minor" && minor=0
+  test -z "$micro" && micro=0
+
+  fail=0
+  if [ ! "$major" -gt "$MAJOR" ]; then
+    if [ "$major" -lt "$MAJOR" ]; then
+      fail=1
+    elif [ ! "$minor" -gt "$MINOR" ]; then
+      if [ "$minor" -lt "$MINOR" ]; then
+        fail=1
+      elif [ "$micro" -lt "$MICRO" ]; then
+        fail=1
+      fi
+    fi
+  fi
+
+  return "$fail"
+}
+
+AUTOMAKE=
+ACLOCAL=
+DIE=0
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+  echo
+  echo "**Error**: You must have \`autoconf' installed to."
+  echo "Download the appropriate package for your distribution,"
+  echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+  DIE=1
+}
+
+for AM in automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake; do
+  (check_version "$AM" 1 6 1) && {
+    AUTOMAKE="$AM"
+    break
+  }
+done
+
+if [ -z "$AUTOMAKE" ]; then
+  echo
+  echo "**Error**: You must have \`automake' version 1.6.1 or greater"
+  echo "installed to compile $PKG_NAME. Download the appropriate package"
+  echo "for your distribution, or get the source tarball at"
+  echo "ftp://ftp.gnu.org/pub/gnu/"
+  DIE=1
+fi
+
+# if no automake, don't bother testing for aclocal
+test -z "$AUTOMAKE" || {
+  for ACL in aclocal-1.11 aclocal-1.10 aclocal-1.9 aclocal-1.8 aclocal-1.7 aclocal-1.6 aclocal; do
+    (check_version "$ACL" 1 6 1) && {
+      ACLOCAL="$ACL"
+      break
+    }
+  done
+
+  if [ -z "$ACLOCAL" ]; then
+    echo
+    echo "**Error**: Missing \`aclocal'. The version of \`automake'"
+    echo "installed seems to be outdated. Get a recent package from"
+    echo "ftp://ftp.gnu.org/pub/gnu/"
+    DIE=1
+  fi
+}
+
+if test "$DIE" -eq 1; then
+  exit 1
+fi
+
+if test -z "$*"; then
+  echo "**Warning**: I am going to run \`configure' with no arguments."
+  echo "If you wish to pass any to it, please specify them on the"
+  echo \`$0\'" command line."
+  echo
+fi
+
+case $CC in
+xlc )
+  am_opt=--include-deps;;
+esac
+
+for coin in `find $srcdir -name configure.ac -print`
+do 
+  dr=`dirname $coin`
+  if test -f $dr/NO-AUTO-GEN; then
+    echo skipping $dr -- flagged as no auto-gen
+  else
+    echo processing $dr
+    macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(\(.*\)),\1,gp' < $coin`
+    ( cd $dr
+      aclocalinclude="$ACLOCAL_FLAGS"
+      for k in $macrodirs; do
+  	if test -d $k; then
+          aclocalinclude="$aclocalinclude -I $k"
+  	##else 
+	##  echo "**Warning**: No such directory \`$k'.  Ignored."
+        fi
+      done
+      echo "Running $ACLOCAL $aclocalinclude ..."
+      "$ACLOCAL" $aclocalinclude
+      echo "Running $AUTOMAKE --add-missing --copy --foreign $am_opt ..."
+      "$AUTOMAKE" --add-missing --copy --foreign $am_opt
+      echo "Running autoconf..."
+      autoconf
+    )
+  fi
+done
+
+#conf_flags="--enable-maintainer-mode --enable-compile-warnings" #--enable-iso-c
+
+if test x$NOCONFIGURE = x; then
+  echo Running $srcdir/configure $conf_flags "$@" ...
+  $srcdir/configure $conf_flags "$@" \
+  && echo Now type \`make\' to compile $PKG_NAME.
+else
+  echo Skipping configure process.
+fi
@@ -1,160 +0,0 @@
-
-class BuildConfig {
-	[string]$Generator
-	[string]$PackageType
-	[string]$Toolset
-	[string]$SimdType
-	[string]$QtDir
-	[Bool]$SourcePackage
-}
-
-$NightlyConfigurations = @(
-	[BuildConfig]@{ 
-		Generator="Visual Studio 14 2015 Win64";
-		PackageType="Win64";
-		Toolset="v140_xp";
-		SimdType="SSE2";
-		QtDir="C:\Qt\5.9\msvc2015_64";
-		SourcePackage=$false;
-	},
-	[BuildConfig]@{ 
-		Generator="Visual Studio 14 2015";
-		PackageType="Win32";
-		Toolset="v140_xp";
-		SimdType="SSE2";
-		QtDir="C:\Qt\5.9\msvc2015";
-		SourcePackage=$false;
-	}
-)
-$ReleaseConfigurations = @(
-	[BuildConfig]@{
-		Generator="Visual Studio 14 2015";
-		PackageType="Win32";
-		Toolset="v140_xp";
-		SimdType="SSE2";
-		QtDir="C:\Qt\5.9\msvc2015";
-		SourcePackage=$true;
-	}
-	[BuildConfig]@{
-		Generator="Visual Studio 14 2015";
-		PackageType="Win32-AVX";
-		Toolset="v140_xp";
-		SimdType="AVX";
-		QtDir="C:\Qt\5.9\msvc2015";
-		SourcePackage=$false;
-	}
-	[BuildConfig]@{
-		Generator="Visual Studio 14 2015 Win64";
-		PackageType="Win64";
-		Toolset="v140_xp";
-		SimdType="SSE2";
-		QtDir="C:\Qt\5.9\msvc2015_64";
-		SourcePackage=$false;
-	}
-	[BuildConfig]@{
-		Generator="Visual Studio 14 2015 Win64";
-		PackageType="Win64-AVX";
-		Toolset="v140_xp";
-		SimdType="AVX";
-		QtDir="C:\Qt\5.9\msvc2015_64";
-		SourcePackage=$false;
-	}
-)
-
-$BuildConfigurations = $null
-
-# Default values
-$ReleaseBuild = $false
-$NightlyBuild = $false
-$TestBuild = $false
-
-# Set to true to test either the release or the nightly part of this script
-$ReleaseTest = $false
-$NightlyTest = $false
-$TestBuildTest = $false
-
-if ($ReleaseTest -Or ([System.Convert]::ToBoolean($env:APPVEYOR_REPO_TAG) -And ("$env:APPVEYOR_REPO_TAG_NAME" -match "^release_(.*)"))) {
-    # Tag matches
-    $ReleaseBuild = $true
-    $PackageName = "fs2_open_$($matches[1])"
-	$BuildConfigurations = $ReleaseConfigurations
-}
-
-if ($NightlyTest -Or ([System.Convert]::ToBoolean($env:APPVEYOR_REPO_TAG) -And ("$env:APPVEYOR_REPO_TAG_NAME" -match "^nightly_(.*)"))) {
-    # Tag matches
-    $NightlyBuild = $true
-    $PackageName = "nightly_$($matches[1])"
-	Set-AppveyorBuildVariable 'VersionName' "$($matches[1])"
-	$BuildConfigurations = $NightlyConfigurations
-}
-
-if ($TestBuildTest -Or ([System.Convert]::ToInt32($env:APPVEYOR_PULL_REQUEST_NUMBER) -le 0 -And ("$env:APPVEYOR_REPO_BRANCH" -match "^test\/(.*)"))) {
-    # Tag matches
-    $TestBuild = $true
-    $PackageName = "test_$($matches[1])"
-	Set-AppveyorBuildVariable 'VersionName' "$($matches[1])"
-	$BuildConfigurations = $NightlyConfigurations
-
-    # Override the revision string so that the builds are named correctly
-	[System.IO.File]::WriteAllLines("$env:APPVEYOR_BUILD_FOLDER/version_override.cmake", "set(FSO_VERSION_REVISION_STR $env:VersionName)")
-}
-
-# Multiply by 2 so that we can add 0 or 1 for debug or release Configs
-$buildID = [convert]::ToInt32($env:BuildID) * 2
-if ($Env:Configuration -eq "Release") {
-    $buildID = $buildID + 1
-}
-
-$DeployBuild = $false
-if ($ReleaseBuild -Or $NightlyBuild -Or $TestBuild) {
-    $DeployBuild = $true
-}
-
-Set-AppveyorBuildVariable 'ReleaseBuild' "$ReleaseBuild"
-Set-AppveyorBuildVariable 'NightlyBuild' "$NightlyBuild"
-Set-AppveyorBuildVariable 'TestBuild' "$TestBuild"
-
-New-Item build -type directory
-Set-Location -Path build
-
-if ($DeployBuild) {
-	# Release build
-	if ($buildID -ge $BuildConfigurations.Length) {
-		# Not needed
-        exit 0
-	}
-
-	$buildConfig = $BuildConfigurations[$buildID]
-
-	if ($buildConfig.SourcePackage -eq $True) {
-		7z a -xr'!.git' "$($PackageName)-source-Win.zip" "$env:APPVEYOR_BUILD_FOLDER"
-		Push-AppveyorArtifact "$($PackageName)-source-Win.zip"
-	}
-	
-	cmake -DCMAKE_INSTALL_PREFIX="$env:APPVEYOR_BUILD_FOLDER/../install" -DFSO_USE_SPEECH="ON" `
-		-DFSO_USE_VOICEREC="ON" -DMSVC_SIMD_INSTRUCTIONS="$($buildConfig.SimdType)" `
-		-DQT5_INSTALL_ROOT="$($buildConfig.QtDir)" -DFSO_BUILD_QTFRED=ON `
-		-G "$($buildConfig.Generator)" -T "$($buildConfig.Toolset)" ..
-
-	$Configs = @("Release", "FastDebug")
-	foreach ($config in $Configs) {
-		cmake --build . --config "$config" --target INSTALL -- /verbosity:minimal
-		if (! ($?)) {
-			Add-AppveyorMessage "A release build failed!"
-			exit 1
-    	}
-	}
-
-    7z a "$($PackageName)-builds-$($buildConfig.PackageType).zip" "$env:APPVEYOR_BUILD_FOLDER/../install/*"
-    Push-AppveyorArtifact "$($PackageName)-builds-$($buildConfig.PackageType).zip"
-} else {
-	cmake -DFSO_USE_SPEECH="ON" -DFSO_FATAL_WARNINGS="ON" -DFSO_USE_VOICEREC="ON" -DFSO_BUILD_TESTS="ON" -DMSVC_SIMD_INSTRUCTIONS=SSE2 `
-	-DFSO_BUILD_QTFRED=ON -DQT5_INSTALL_ROOT="$env:QT_DIR" -DFSO_BUILD_FRED2="ON" `
-	-G "$Env:CMAKE_GENERATOR" -T "$Env:PlatformToolset" ..
-
-    cmake --build . --config "$Env:CONFIGURATION" -- /verbosity:minimal
-
-    if (! ($?)) {
-        exit 1
-    }
-}
@@ -1,13 +0,0 @@
-
-if ([System.Convert]::ToBoolean($env:ReleaseBuild) -Or [System.Convert]::ToBoolean($env:NightlyBuild) -Or [System.Convert]::ToBoolean($env:TestBuild)) {
-    # Skip tests for deployment
-    exit 0
-} else {    
-    write "Running unit tests..."
-    # Run unit tests
-    &"$pwd\bin\$Env:CONFIGURATION\unittests.exe" --gtest_shuffle 2>&1
-
-    if (! ($?)) {
-        exit 1
-    }
-}
@@ -1,19 +0,0 @@
-{
-    "package": {
-        "subject": "scp-fs2open",
-        "repo": "FSO",
-        "name": "nightly"
-    },
-
-    "version": {
-        "name": "$VERSION_NAME"
-    },
-
-    "files": [
-        {
-            "includePattern": "/tmp/builds/(.*)",
-            "uploadPattern": "$1"
-        }
-    ],
-    "publish": true
-}
@@ -1,8 +0,0 @@
-#!/usr/bin/env sh
-
-set -ex
-
-if [ "$NIGHTLY_BUILD" = true ]; then
-    echo "Generating bintray config..."
-    sed -e "s/\$VERSION_NAME/$VERSION_NAME/" ci/bintray.template.json > ci/bintray.json
-fi
@@ -1,14 +0,0 @@
-#!/usr/bin/env sh
-
-set -ex
-
-if [ "$TRAVIS_OS_NAME" = "linux" ]; then
-    # Nothing to do here
-    :
-elif [ "$TRAVIS_OS_NAME" = "osx" ]; then
-    # Nothing to do here
-    :
-elif [ "$TRAVIS_OS_NAME" = "windows" ]; then
-    # Nothing to do here
-    :
-fi
@@ -1,54 +0,0 @@
-#!/usr/bin/env bash
-
-set -ex
-
-if [ "$TRAVIS_OS_NAME" = "linux" ]; then
-    mkdir -p /tmp/builds
-    if [ "$RELEASE_BUILD" = true ]; then
-        # Package the source code in release builds
-        PARENT_DIR="$(basename "$PWD")"
-        (cd .. && tar -czvf /tmp/builds/$PACKAGE_NAME-source-Unix.tar.gz --exclude-vcs "$PARENT_DIR")
-    fi
-fi
-
-mkdir -p build
-cd build
-
-if [ "$TRAVIS_OS_NAME" = "linux" ]; then
-    CXXFLAGS="-m64 -mtune=generic -mfpmath=sse -msse -msse2 -pipe -Wno-unknown-pragmas"
-    CFLAGS="-m64 -mtune=generic -mfpmath=sse -msse -msse2 -pipe -Wno-unknown-pragmas"
-
-    if [[ "$CC" =~ ^clang.*$ ]]; then
-        CXXFLAGS="$CXXFLAGS -stdlib=libc++"
-    fi
-
-    export CXXFLAGS
-    export CFLAGS
-    CMAKE="cmake -G Ninja -DFSO_FATAL_WARNINGS=ON $CMAKE_OPTIONS"
-    if [ "$BUILD_DEPLOYMENT" = true ]; then
-        for config in $BUILD_CONFIGS
-        do
-            mkdir -p $config
-            cd $config
-            eval $CMAKE -DFSO_INSTALL_DEBUG_FILES=ON -DCMAKE_BUILD_TYPE=$config -DCMAKE_INSTALL_PREFIX="/tmp/release/$config" \
-                -DFSO_BUILD_APPIMAGE=ON -DFSO_BUILD_INCLUDED_LIBS=ON -DFFMPEG_USE_PRECOMPILED=ON -DFSO_BUILD_QTFRED=OFF ../..
-            cd ..
-        done
-    else
-        eval $CMAKE -DCMAKE_BUILD_TYPE=$CONFIGURATION -DFSO_BUILD_TESTS=ON -DFSO_BUILD_INCLUDED_LIBS=ON -DFSO_BUILD_QTFRED=ON ..
-    fi
-elif [ "$TRAVIS_OS_NAME" = "osx" ]; then
-    if [ "$BUILD_DEPLOYMENT" = true ]; then
-        cmake -G "Xcode" -DFSO_FATAL_WARNINGS=ON -DFSO_INSTALL_DEBUG_FILES=ON -DCMAKE_INSTALL_PREFIX="/tmp/release" ..
-    else
-        cmake -G "Xcode" $CMAKE_OPTIONS ..
-    fi
-elif [ "$TRAVIS_OS_NAME" = "windows" ]; then
-    if [ "$CMAKE_GENERATOR" = "Ninja" ]; then
-        cmake -DFSO_USE_SPEECH="OFF" -DFSO_FATAL_WARNINGS="ON" -DFSO_USE_VOICEREC="OFF" -DFSO_BUILD_TESTS="ON" \
-            -DFSO_BUILD_FRED2="OFF" -G "$CMAKE_GENERATOR" ..
-    else
-        cmake -DFSO_USE_SPEECH="ON" -DFSO_FATAL_WARNINGS="ON" -DFSO_USE_VOICEREC="OFF" -DFSO_BUILD_TESTS="ON" \
-            -DMSVC_SIMD_INSTRUCTIONS=SSE2 -DFSO_BUILD_FRED2="ON" -G "$CMAKE_GENERATOR" -T "$CMAKE_TOOLSET" ..
-    fi
-fi
@@ -1,74 +0,0 @@
-#!/usr/bin/env sh
-
-RELEASE_BUILD=false
-NIGHTLY_BUILD=false
-TEST_BUILD=false
-
-BUILD_DEPLOYMENT=false
-BUILD_CONFIGS="Release FastDebug"
-VERSION_NAME=""
-PACKAGE_NAME=""
-
-RELEASE_PATTERN="^release_(.*)$"
-NIGHTLY_PATTERN="^nightly_(.*)$"
-TEST_BUILD_PATTERN="^test\/(.*)$"
-
-# These are for testing
-NIGHTLY_TEST=false
-RELEASE_TEST=false
-TEST_BUILD_TEST=false
-
-if [ "$RELEASE_TEST" = true ] || [[ "$TRAVIS_TAG" =~ $RELEASE_PATTERN ]]; then
-    echo "This is a release tag!";
-    RELEASE_BUILD=true;
-	PACKAGE_NAME="fs2_open_${BASH_REMATCH[1]}";
-fi
-if [ "$NIGHTLY_TEST" = true ] || [[ "$TRAVIS_TAG" =~ $NIGHTLY_PATTERN ]]; then
-    echo "This is a nightly tag!";
-    NIGHTLY_BUILD=true;
-    VERSION_NAME="${BASH_REMATCH[1]}";
-	PACKAGE_NAME="nightly_${BASH_REMATCH[1]}";
-fi
-if [ "$TEST_BUILD_TEST" = true ] || [[ "$TRAVIS_PULL_REQUEST" == "false" && "$TRAVIS_BRANCH" =~ $TEST_BUILD_PATTERN ]]; then
-    echo "This is a test build branch!";
-    TEST_BUILD=true;
-    if [ "$TEST_BUILD_TEST" = true ]; then
-        VERSION_NAME="test";
-        PACKAGE_NAME="test_test";
-    else
-        VERSION_NAME="${BASH_REMATCH[1]}";
-        PACKAGE_NAME="test_${BASH_REMATCH[1]}";
-    fi
-
-    # Override the revision string so that the builds are named correctly
-    echo "set(FSO_VERSION_REVISION_STR $VERSION_NAME)" > "$TRAVIS_BUILD_DIR/version_override.cmake"
-fi
-
-if ([ "$RELEASE_BUILD" = true ] || [ "$NIGHTLY_BUILD" = true ] || [ "$TEST_BUILD" = true ]); then
-    BUILD_DEPLOYMENT=true;
-fi
-
-if [ "$BUILD_DEPLOYMENT" = true ]; then
-    if ([ "$TRAVIS_OS_NAME" = "linux" ] && (! [[ "$CC" =~ ^gcc-5.*$ ]])); then
-        echo "Skipping non-release compiler";
-        exit 0;
-    fi
-
-    if ([[ "$CONFIGURATION" == "Debug" ]]); then
-        echo "Skipping non-release configuration";
-        exit 0;
-    fi
-
-    if [ "$TRAVIS_OS_NAME" = "windows" ]; then
-        echo "Skipping non-release platform"
-        exit 0
-    fi
-fi
-
-export RELEASE_BUILD
-export NIGHTLY_BUILD
-export TEST_BUILD
-export BUILD_DEPLOYMENT
-export BUILD_CONFIGS
-export VERSION_NAME
-export PACKAGE_NAME
@@ -1,141 +0,0 @@
-#!/usr/bin/env python
-#
-#===- clang-tidy-diff.py - ClangTidy Diff Checker ------------*- python -*--===#
-#
-#                     The LLVM Compiler Infrastructure
-#
-# This file is distributed under the University of Illinois Open Source
-# License. See LICENSE.TXT for details.
-#
-#===------------------------------------------------------------------------===#
-
-r"""
-ClangTidy Diff Checker
-======================
-
-This script reads input from a unified diff, runs clang-tidy on all changed
-files and outputs clang-tidy warnings in changed lines only. This is useful to
-detect clang-tidy regressions in the lines touched by a specific patch.
-Example usage for git/svn users:
-
-  git diff -U0 HEAD^ | clang-tidy-diff.py -p1
-  svn diff --diff-cmd=diff -x-U0 | \
-      clang-tidy-diff.py -fix -checks=-*,modernize-use-override
-
-"""
-
-import argparse
-import json
-import re
-import subprocess
-import sys
-
-
-def main():
-  parser = argparse.ArgumentParser(description=
-                                   'Run clang-tidy against changed files, and '
-                                   'output diagnostics only for modified '
-                                   'lines.')
-  parser.add_argument('-clang-tidy-binary', metavar='PATH',
-                      default='clang-tidy',
-                      help='path to clang-tidy binary')
-  parser.add_argument('-p', metavar='NUM', default=0,
-                      help='strip the smallest prefix containing P slashes')
-  parser.add_argument('-regex', metavar='PATTERN', default=None,
-                      help='custom pattern selecting file paths to check '
-                      '(case sensitive, overrides -iregex)')
-  parser.add_argument('-iregex', metavar='PATTERN', default=
-                      r'.*\.(cpp|cc|c\+\+|cxx|c|cl|h|hpp|m|mm|inc)',
-                      help='custom pattern selecting file paths to check '
-                      '(case insensitive, overridden by -regex)')
-
-  parser.add_argument('-fix', action='store_true', default=False,
-                      help='apply suggested fixes')
-  parser.add_argument('-checks',
-                      help='checks filter, when not specified, use clang-tidy '
-                      'default',
-                      default='')
-  parser.add_argument('-path', dest='build_path',
-                      help='Path used to read a compile command database.')
-  parser.add_argument('-extra-arg', dest='extra_arg',
-                      action='append', default=[],
-                      help='Additional argument to append to the compiler '
-                      'command line.')
-  parser.add_argument('-extra-arg-before', dest='extra_arg_before',
-                      action='append', default=[],
-                      help='Additional argument to prepend to the compiler '
-                      'command line.')
-  parser.add_argument('-quiet', action='store_true', default=False,
-                      help='Run clang-tidy in quiet mode')
-  clang_tidy_args = []
-  argv = sys.argv[1:]
-  if '--' in argv:
-    clang_tidy_args.extend(argv[argv.index('--'):])
-    argv = argv[:argv.index('--')]
-
-  args = parser.parse_args(argv)
-
-  # Extract changed lines for each file.
-  filename = None
-  lines_by_file = {}
-  for line in sys.stdin:
-    match = re.search('^\+\+\+\ \"?(.*?/){%s}([^ \t\n\"]*)' % args.p, line)
-    if match:
-      filename = match.group(2)
-    if filename == None:
-      continue
-
-    if args.regex is not None:
-      if not re.match('^%s$' % args.regex, filename):
-        continue
-    else:
-      if not re.match('^%s$' % args.iregex, filename, re.IGNORECASE):
-        continue
-
-    match = re.search('^@@.*\+(\d+)(,(\d+))?', line)
-    if match:
-      start_line = int(match.group(1))
-      line_count = 1
-      if match.group(3):
-        line_count = int(match.group(3))
-      if line_count == 0:
-        continue
-      end_line = start_line + line_count - 1;
-      lines_by_file.setdefault(filename, []).append([start_line, end_line])
-
-  if len(lines_by_file) == 0:
-    print("No relevant changes found.")
-    sys.exit(0)
-
-  line_filter_json = json.dumps(
-    [{"name" : name, "lines" : lines_by_file[name]} for name in lines_by_file],
-    separators = (',', ':'))
-
-  quote = "";
-  if sys.platform == 'win32':
-    line_filter_json=re.sub(r'"', r'"""', line_filter_json)
-  else:
-    quote = "'";
-
-  # Run clang-tidy on files containing changes.
-  command = [args.clang_tidy_binary]
-  command.append('-line-filter=' + quote + line_filter_json + quote)
-  if args.fix:
-    command.append('-fix')
-  if args.checks != '':
-    command.append('-checks=' + quote + args.checks + quote)
-  if args.quiet:
-    command.append('-quiet')
-  if args.build_path is not None:
-    command.append('-p=%s' % args.build_path)
-  command.extend(lines_by_file.keys())
-  for arg in args.extra_arg:
-      command.append('-extra-arg=%s' % arg)
-  for arg in args.extra_arg_before:
-      command.append('-extra-arg-before=%s' % arg)
-  command.extend(clang_tidy_args)
-
-  sys.exit(subprocess.call(' '.join(command), shell=True))
-
-if __name__ == '__main__':
-  main()
@@ -1,24 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-
-if ! git rev-list $TRAVIS_COMMIT_RANGE 2>1 >/dev/null; then
-    echo "\$TRAVIS_COMMIT_RANGE ($TRAVIS_COMMIT_RANGE) is not valid for this build (probably caused by a rebase)."
-    exit 0
-fi
-
-cd "$TRAVIS_BUILD_DIR"
-
-echo "Running clang-tidy on changed files"
-git diff -U0 --no-color $TRAVIS_COMMIT_RANGE | \
-    $TRAVIS_BUILD_DIR/ci/travis/clang-tidy-diff.py -path "$TRAVIS_BUILD_DIR/build" -p1 \
-    -regex 'code/.*$|freespace2/.*$|qtfred/.*$|test/src/.*$|build/.*$|tools/.*' \
-    -clang-tidy-binary /usr/bin/clang-tidy-4.0 2>/dev/null | \
-    tee clang-tidy-output.txt
-
-if [[ -n $(grep "warning: " clang-tidy-output.txt) ]] || [[ -n $(grep "error: " clang-tidy-output.txt) ]]; then
-    echo "Errors or warnings were detected in the clang-tidy output!"
-    exit 1
-else
-    echo -e "\033[1;32m\xE2\x9C\x93 passed:\033[0m clang-tidy test succeeded";
-fi
@@ -1,89 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-set -u
-
-if [[ ! "$(curl -V)" == *"sftp"* ]]; then
-    # Before
-    echo "Before:"
-    curl -V
-
-    if [ "$TRAVIS_OS_NAME" = "linux" ]; then
-
-        if [ -f ~/curl_cache/curl*.deb ]; then
-            cd ~/curl_cache
-            sudo dpkg -i libcurl3*.deb
-            sudo dpkg -i curl*.deb
-        else
-            # Since the Travis CI people are not capable of enabling SSH/SCP support for their libcurl we need to build that manually...
-            # These commands are based on the tutorial from here: http://zeroset.mnim.org/2013/03/14/sftp-support-for-curl-in-ubuntu-12-10-quantal-quetzal-and-later/
-            mkdir /tmp/curl
-            cd /tmp/curl
-            sudo apt-get update
-            sudo apt-get install build-essential debhelper libssh2-1-dev libgnutls-dev libidn11-dev libkrb5-dev libldap2-dev libnss3-dev librtmp-dev libtool openssh-server quilt
-            apt-get source curl
-            sudo apt-get build-dep curl
-
-            cd curl-*
-            export DEB_BUILD_OPTIONS="nocheck"
-            sudo dpkg-buildpackage -uc -us -j"$(grep -c ^processor /proc/cpuinfo)"
-
-            cd ..
-            dpkg -l | grep curl
-            ls -al
-
-            if [ ! -d ~/curl_cache ]; then
-                mkdir ~/curl_cache
-            fi
-
-            cp libcurl3*.deb curl*.deb ~/curl_cache
-
-            sudo dpkg -i libcurl3*.deb
-            sudo dpkg -i curl*.deb
-        fi
-    elif [ "$TRAVIS_OS_NAME" = "osx" ]; then
-        brew install libssh2
-        
-        if [ -d ~/curl_cache/curl ]; then
-            cd ~/curl_cache/curl
-            sudo make install
-        else
-            mkdir /tmp/curl
-            cd /tmp/curl
-
-            curl -LO "https://curl.haxx.se/download/curl-7.64.0.tar.bz2"
-            tar -xjf curl-7.64.0.tar.bz2
-
-            cd curl-7.64.0
-            ./configure --disable-debug --disable-dependency-tracking --disable-silent-rules --with-libssh2 --with-darwinssl --without-ca-bundle --without-ca-path
-            make -j"$(sysctl hw.logicalcpu | cut -d " " -f 2)"
-
-            if [ ! -d ~/curl_cache ]; then
-                mkdir ~/curl_cache
-            fi
-
-            cp -a . ~/curl_cache/curl
-            sudo make install
-        fi
-        export PATH=/usr/local/bin:$PATH
-    fi
-
-    # After
-    echo "After:"
-    curl -V
-fi
-
-cd /tmp/builds
-
-for file in *; do
-    if [ "$TEST_BUILD" = true ]; then
-        # Upload to fs2downloads
-        curl -k "ftp://swc.fs2downloads.com/swc.fs2downloads.com/builds/test/$VERSION_NAME/" --user "$FS2DOWNLOADS_USER:$FS2DOWNLOADS_PASSWORD" -T "$file" --ftp-create-dirs
-    else
-        # Upload to indiegames
-        curl -k "sftp://scp.indiegames.us/~/public_html/builds/nightly/$VERSION_NAME/" --user "$INDIEGAMES_USER:$INDIEGAMES_PASSWORD" -T "$file" --ftp-create-dirs
-
-        # Upload to fs2downloads
-        curl -k "ftp://swc.fs2downloads.com/swc.fs2downloads.com/builds/nightly/$VERSION_NAME/" --user "$FS2DOWNLOADS_USER:$FS2DOWNLOADS_PASSWORD" -T "$file" --ftp-create-dirs
-    fi
-done
@@ -1,34 +0,0 @@
-#!/usr/bin/env sh
-
-set -ex
-
-FILENAME=
-if [ "$TRAVIS_OS_NAME" = "linux" ]; then
-    if [ ! -d "$HOME/cmake-3.8/bin" ]; then
-        # If the cache does not currently contain CMake then download and install it
-    	mkdir -p $HOME/cmake-3.8/
-
-    	wget -O /tmp/cmake.tar.gz --no-check-certificate https://cmake.org/files/v3.8/cmake-3.8.2-Linux-x86_64.tar.gz
-    	tar -xzf /tmp/cmake.tar.gz -C $HOME/cmake-3.8/ --strip-components=1
-    fi
-	export PATH=$HOME/cmake-3.8/bin:$PATH
-    
-    cd $HOME
-    
-    if [ "${BUILD_DEPLOYMENT}" = true ]; then
-        wget -O appimagetool -c "https://github.com/AppImage/AppImageKit/releases/download/continuous/appimagetool-x86_64.AppImage" # (64-bit)
-        chmod a+x ./appimagetool
-
-        wget -O linuxdeployqt -c "https://github.com/probonopd/linuxdeployqt/releases/download/continuous/linuxdeployqt-continuous-x86_64.AppImage" # (64-bit)
-        chmod a+x ./linuxdeployqt
-    fi
-elif [ "$TRAVIS_OS_NAME" = "osx" ]; then
-    gem install xcpretty
-    
-    brew update
-    brew outdated cmake || brew upgrade cmake
-elif [ "$TRAVIS_OS_NAME" = "windows" ]; then
-    choco install mingw ninja
-fi
-
-cmake --version
@@ -1,68 +0,0 @@
-#!/usr/bin/env sh
-
-set -ex
-mkdir -p /tmp/builds
-
-if [ "$TRAVIS_OS_NAME" = "linux" ]; then
-	cd build
-    for config in $BUILD_CONFIGS
-    do
-        cd "$config"
-
-        # Compile all targets
-        ninja all
-
-        # Install Freespace2 targets
-        cmake -DCMAKE_INSTALL_PREFIX=/tmp/release/$config/fso -DCOMPONENT=Unspecified -P cmake_install.cmake
-        cmake -DCMAKE_INSTALL_PREFIX=/tmp/release/$config/fso -DCOMPONENT=Freespace2 -P cmake_install.cmake
-
-        # We need to be a bit creative for determining the AppImage name since we don't want to hard-code the name
-        FILENAME="$(find /tmp/release/$config/fso/bin -name 'fs2_open_*' -type f -printf "%f\n").AppImage"
-        $HOME/appimagetool -n /tmp/release/$config/fso "/tmp/release/$config/fso/$FILENAME"
-
-: <<'END'
-        # Install qtFRED targets
-        cmake -DCMAKE_INSTALL_PREFIX=/tmp/release/$config/qtfred/usr -DCOMPONENT=Unspecified -P cmake_install.cmake
-        cmake -DCMAKE_INSTALL_PREFIX=/tmp/release/$config/qtfred/usr -DCOMPONENT=qtFRED -P cmake_install.cmake
-
-        PREV="$(pwd)"
-        cd /tmp/release/$config/qtfred
-
-        unset QTDIR; unset QT_PLUGIN_PATH; unset LD_LIBRARY_PATH
-        $HOME/linuxdeployqt usr/qtfred.desktop -bundle-non-qt-libs
-        # Move our AppRun script to the right location
-        mv usr/AppRun AppRun
-
-        echo "Embed newer libstdc++ for distros that don't come with it (ubuntu 14.04)";
-        mkdir -p usr/optional/; mkdir -p usr/optional/libstdc++/;
-        cp /usr/lib/x86_64-linux-gnu/libstdc++.so.6 ./usr/optional/libstdc++/;
-
-        $HOME/appimagetool -n . "$(find /tmp/release/$config/qtfred/usr/bin -name 'qtfred_*' -type f -printf "%f\n").AppImage"
-
-        cd "$PREV"
-END
-
-        cd ..
-    done
-
-    cp `find /tmp/release -name '*.AppImage' -print` /tmp/release
-    (cd /tmp/release && tar -cvzf /tmp/builds/$PACKAGE_NAME-builds-Linux.tar.gz *.AppImage)
-elif [ "$TRAVIS_OS_NAME" = "osx" ]; then
-    cd build
-    
-    for config in $BUILD_CONFIGS
-    do
-        cmake --build . --config "$config" --target install | tee build.log \
-            | xcpretty
-        XCODE_RET=${PIPESTATUS[0]}
-        if [ "$XCODE_RET" -ne "0" ]; then
-            tar -cvzf build.log.tar.gz build.log
-            curl --upload-file build.log.tar.gz "https://transfer.sh/build.log.tar.gz"
-            exit $XCODE_RET
-        fi
-    done
-
-    ls -al /tmp/release
-    
-    (cd /tmp/release && tar -cvzf /tmp/builds/$PACKAGE_NAME-builds-MacOSX.tar.gz *)
-fi
@@ -1,31 +0,0 @@
-#!/usr/bin/env sh
-
-set -e
-
-cd build
-
-if [ "$TRAVIS_OS_NAME" = "linux" ]; then
-    ninja -k 20 all
-
-
-    if [ "$CONFIGURATION" = "Debug" ]; then
-        valgrind --leak-check=full --error-exitcode=1 --gen-suppressions=all \
-            --suppressions="$TRAVIS_BUILD_DIR/ci/travis/valgrind.supp" ./bin/unittests --gtest_shuffle
-    else
-        ./bin/unittests --gtest_shuffle
-    fi
-elif [ "$TRAVIS_OS_NAME" = "osx" ]; then
-    cmake --build . --config "$CONFIGURATION" | tee build.log | xcpretty
-    XCODE_RET=${PIPESTATUS[0]}
-    if [ "$XCODE_RET" -ne "0" ]; then
-        tar -cvzf build.log.tar.gz build.log
-        curl --upload-file build.log.tar.gz "https://transfer.sh/build.log.tar.gz"
-        exit $XCODE_RET
-    fi
-elif [ "$TRAVIS_OS_NAME" = "windows" ]; then
-    if [ "$CMAKE_GENERATOR" = "Ninja" ]; then
-        cmake --build . --config "$CONFIGURATION"
-    else
-        cmake --build . --config "$CONFIGURATION" -- /verbosity:minimal
-    fi
-fi
@@ -1,43 +0,0 @@
-{
-   liblsan Invalid read
-   Memcheck:Addr8
-   obj:/usr/lib64/liblsan.so.0.0.0
-   obj:/usr/lib64/liblsan.so.0.0.0
-   obj:/usr/lib64/liblsan.so.0.0.0
-   obj:*
-   obj:*
-   obj:*
-}
-{
-    Travis memleak
-    Memcheck:Leak
-    match-leak-kinds: definite
-    fun:malloc
-    fun:_dl_signal_error
-    fun:_dl_open
-    fun:dlopen_doit
-    fun:_dl_catch_error
-    fun:_dlerror_run
-    fun:dlopen@@GLIBC_2.2.5
-    obj:/usr/lib/x86_64-linux-gnu/libmirclient.so.7
-    fun:call_init.part.0
-    fun:call_init
-    fun:_dl_init
-    fun:dl_open_worker
-    fun:_dl_catch_error
-}
-{
-   CLang Lua unitialized value error
-   Memcheck:Cond
-   ...
-   fun:luaH_get
-   fun:lua_rawget
-   fun:_ZN12_GLOBAL__N_117ade_index_handlerEP9lua_State
-}
-{
-   False-positive uninitialized variable warning
-   Memcheck:Cond
-   fun:_Z23cf_check_location_flagsjj
-   fun:_Z29cf_create_default_path_stringPcjiPKcbj
-   ...
-}
@@ -1,6 +0,0 @@
-[Desktop Entry]
-Type=Application
-Name=FreeSpace Open
-Exec=$<TARGET_FILE_NAME:Freespace2>
-Icon=app_icon
-Categories=Game;
@@ -1,4 +0,0 @@
-#!/bin/sh
-HERE=$(dirname $(readlink -f "${0}"))
-export LD_LIBRARY_PATH="${HERE}"/lib:"$LD_LIBRARY_PATH"
-"${HERE}"/bin/$<TARGET_FILE_NAME:Freespace2> $@
@@ -1,17 +0,0 @@
-
-include(WriteCompilerDetectionHeader)
-
-set(CMAKE_CXX_STANDARD_REQUIRED 11)
-set(CMAKE_CXX_STANDARD 11)
-
-set(REQUIRED_CXX_FEATURES cxx_rvalue_references cxx_nullptr)
-
-get_property(CMAKE_CXX_KNOWN_FEATURES GLOBAL PROPERTY CMAKE_CXX_KNOWN_FEATURES)
-
-write_compiler_detection_header(
-  FILE "${GENERATED_SOURCE_DIR}/scp_compiler_detection.h"
-  PREFIX SCP
-  COMPILERS AppleClang Clang GNU MSVC
-  FEATURES ${CMAKE_CXX_KNOWN_FEATURES}
-  VERSION 3.2
-)
@@ -1,21 +0,0 @@
-
-SET(BINARY_DESTINATION "bin")
-SET(LIBRAY_DESTINATION "lib")
-
-configure_file("${CMAKE_CURRENT_LIST_DIR}/AppRun.in" "${CMAKE_CURRENT_BINARY_DIR}/AppRun.gen" @ONLY)
-file(GENERATE OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/AppRun-$<CONFIG>"
-    INPUT "${CMAKE_CURRENT_BINARY_DIR}/AppRun.gen")
-
-install(PROGRAMS "${CMAKE_CURRENT_BINARY_DIR}/AppRun-$<CONFIG>" DESTINATION "." RENAME "AppRun"
-        COMPONENT "Freespace2")
-
-
-configure_file("${CMAKE_CURRENT_LIST_DIR}/AppImage.desktop.in" "${CMAKE_CURRENT_BINARY_DIR}/AppImage.desktop.gen" @ONLY)
-file(GENERATE OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/AppImage-$<CONFIG>.desktop"
-    INPUT "${CMAKE_CURRENT_BINARY_DIR}/AppImage.desktop.gen")
-
-install(FILES "${CMAKE_CURRENT_BINARY_DIR}/AppImage-$<CONFIG>.desktop" DESTINATION "." RENAME "fso.desktop"
-        COMPONENT "Freespace2")
-
-install(FILES "${CMAKE_SOURCE_DIR}/freespace2/resources/app_icon.png" DESTINATION "."
-        COMPONENT "Freespace2")
@@ -1,37 +0,0 @@
-option(ENABLE_CLANG_TIDY "Enable source code checking using clang-tidy" OFF)
-
-find_program(
-    CLANG_TIDY_EXE
-    NAMES "clang-tidy"
-    DOC "Path to clang-tidy executable"
-)
-
-function(enable_clang_tidy target)
-    # Not enabled in this configuration
-endfunction()
-
-if(NOT ENABLE_CLANG_TIDY)
-    return()
-endif()
-
-if(NOT EXISTS "${CLANG_TIDY_EXE}")
-    message(SEND_ERROR "clang-tidy: Could not find clang-tidy executable (value of variable is \"${CLANG_TIDY_EXE}\".")
-    return()
-endif()
-
-if(CMAKE_VERSION VERSION_LESS "3.6.0")
-    message(SEND_ERROR "Clang-tidy support requires CMake 3.6")
-    return()
-endif()
-
-message(STATUS "clang-tidy: Using \"${CLANG_TIDY_EXE}\"")
-
-function(enable_clang_tidy target)
-    SET(TIDY_OPTIONS "${CLANG_TIDY_EXE}")
-    if(FSO_FATAL_WARNINGS)
-        set(TIDY_OPTIONS "${TIDY_OPTIONS};-warnings-as-errors=*")
-    endif()
-
-    set_target_properties(${target} PROPERTIES CXX_CLANG_TIDY "${TIDY_OPTIONS}")
-endfunction()
-
@@ -1,59 +0,0 @@
-// Code snippet from http://stackoverflow.com/a/7495023
-#ifdef _WIN32
-#include <intrin.h>
-//  Windows
-#define cpuid    __cpuid
-
-#else
-
-//  GCC Inline Assembly
-void cpuid(int CPUInfo[4],int InfoType){
-    __asm__ __volatile__ (
-        "cpuid":
-        "=a" (CPUInfo[0]),
-        "=b" (CPUInfo[1]),
-        "=c" (CPUInfo[2]),
-        "=d" (CPUInfo[3]) :
-        "a" (InfoType)
-    );
-}
-
-#endif
-
-#include <iostream>
-
-int main( int argc, char* argv[] )
-{
-	int SSE     = false;
-	int SSE2    = false;
-	int AVX     = false;
-	int AVX2    = false;
-
-	int info[4];
-	cpuid(info, 0);
-	int nIds = info[0];
-
-	//  Detect Instruction Set
-	if (nIds >= 1){
-		cpuid(info,0x00000001);
-		SSE   = (info[3] & ((int)1 << 25)) != 0;
-		SSE2  = (info[3] & ((int)1 << 26)) != 0;
-
-		AVX   = (info[2] & ((int)1 << 28)) != 0;
-	}
-	if (nIds >= 7){
-		cpuid(info,0x00000007);
-		AVX2  = (info[1] & ((int)1 <<  5)) != 0;
-	}
-
-	if (AVX2)
-		std::cout << "AVX2";
-	else if(AVX)
-		std::cout << "AVX";
-	else if(SSE2)
-		std::cout << "SSE2";
-	else if(SSE)
-		std::cout << "SSE";
-
-	return 0;
-}
@@ -1,26 +0,0 @@
-
-# Sample toolchain file for building for Windows from a Linux system.
-#
-# Typical usage:
-#    *) install cross compiler: `sudo apt-get install mingw-w64 g++-mingw-w64`
-#    *) cd build
-#    *) cmake -DCMAKE_TOOLCHAIN_FILE=~/Toolchain-Ubuntu-mingw64.cmake ..
-
-set(CMAKE_SYSTEM_NAME Windows)
-set(TOOLCHAIN_PREFIX x86_64-w64-mingw32)
-
-# cross compilers to use for C and C++
-set(CMAKE_C_COMPILER ${TOOLCHAIN_PREFIX}-gcc)
-set(CMAKE_CXX_COMPILER ${TOOLCHAIN_PREFIX}-g++)
-set(CMAKE_RC_COMPILER ${TOOLCHAIN_PREFIX}-windres)
-
-# target environment on the build host system
-#   set 1st to dir with the cross compiler's C/C++ headers/libs
-set(CMAKE_FIND_ROOT_PATH /usr/${TOOLCHAIN_PREFIX})
-
-# modify default behavior of FIND_XXX() commands to
-# search for headers/libs in the target environment and
-# don't search for programs in the build host environment
-set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
-set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
-set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
@@ -1,154 +0,0 @@
-# ------------------------- Begin Generic CMake Variable Logging ------------------
-
-# /*	C++ comment style not allowed	*/
-
-
-# if you are building in-source, this is the same as CMAKE_SOURCE_DIR, otherwise
-# this is the top level directory of your build tree
-MESSAGE( STATUS "CMAKE_BINARY_DIR:         " ${CMAKE_BINARY_DIR} )
-
-# if you are building in-source, this is the same as CMAKE_CURRENT_SOURCE_DIR, otherwise this
-# is the directory where the compiled or generated files from the current CMakeLists.txt will go to
-MESSAGE( STATUS "CMAKE_CURRENT_BINARY_DIR: " ${CMAKE_CURRENT_BINARY_DIR} )
-
-# this is the directory, from which cmake was started, i.e. the top level source directory
-MESSAGE( STATUS "CMAKE_SOURCE_DIR:         " ${CMAKE_SOURCE_DIR} )
-
-# this is the directory where the currently processed CMakeLists.txt is located in
-MESSAGE( STATUS "CMAKE_CURRENT_SOURCE_DIR: " ${CMAKE_CURRENT_SOURCE_DIR} )
-
-# contains the full path to the top level directory of your build tree
-MESSAGE( STATUS "PROJECT_BINARY_DIR: " ${PROJECT_BINARY_DIR} )
-
-MESSAGE( STATUS "CMAKE_CXX_COMPILER_ID: " ${CMAKE_CXX_COMPILER_ID} )
-
-# contains the full path to the root of your project source directory,
-# i.e. to the nearest directory where CMakeLists.txt contains the PROJECT() command
-MESSAGE( STATUS "PROJECT_SOURCE_DIR: " ${PROJECT_SOURCE_DIR} )
-
-# set this variable to specify a common place where CMake should put all executable files
-# (instead of CMAKE_CURRENT_BINARY_DIR)
-MESSAGE( STATUS "EXECUTABLE_OUTPUT_PATH: " ${EXECUTABLE_OUTPUT_PATH} )
-
-# set this variable to specify a common place where CMake should put all libraries
-# (instead of CMAKE_CURRENT_BINARY_DIR)
-MESSAGE( STATUS "LIBRARY_OUTPUT_PATH:     " ${LIBRARY_OUTPUT_PATH} )
-
-# tell CMake to search first in directories listed in CMAKE_MODULE_PATH
-# when you use FIND_PACKAGE() or INCLUDE()
-MESSAGE( STATUS "CMAKE_MODULE_PATH: " ${CMAKE_MODULE_PATH} )
-
-# this is the complete path of the cmake which runs currently (e.g. /usr/local/bin/cmake)
-MESSAGE( STATUS "CMAKE_COMMAND: " ${CMAKE_COMMAND} )
-
-# this is the CMake installation directory
-MESSAGE( STATUS "CMAKE_ROOT: " ${CMAKE_ROOT} )
-
-# this is the filename including the complete path of the file where this variable is used.
-MESSAGE( STATUS "CMAKE_CURRENT_LIST_FILE: " ${CMAKE_CURRENT_LIST_FILE} )
-
-# this is linenumber where the variable is used
-MESSAGE( STATUS "CMAKE_CURRENT_LIST_LINE: " ${CMAKE_CURRENT_LIST_LINE} )
-
-# this is used when searching for include files e.g. using the FIND_PATH() command.
-MESSAGE( STATUS "CMAKE_INCLUDE_PATH: " ${CMAKE_INCLUDE_PATH} )
-
-# this is used when searching for libraries e.g. using the FIND_LIBRARY() command.
-MESSAGE( STATUS "CMAKE_LIBRARY_PATH: " ${CMAKE_LIBRARY_PATH} )
-
-# the complete system name, e.g. "Linux-2.4.22", "FreeBSD-5.4-RELEASE" or "Windows 5.1"
-MESSAGE( STATUS "CMAKE_SYSTEM: " ${CMAKE_SYSTEM} )
-
-# the short system name, e.g. "Linux", "FreeBSD" or "Windows"
-MESSAGE( STATUS "CMAKE_SYSTEM_NAME: " ${CMAKE_SYSTEM_NAME} )
-
-# only the version part of CMAKE_SYSTEM
-MESSAGE( STATUS "CMAKE_SYSTEM_VERSION: " ${CMAKE_SYSTEM_VERSION} )
-
-# the processor name (e.g. "Intel(R) Pentium(R) M processor 2.00GHz")
-MESSAGE( STATUS "CMAKE_SYSTEM_PROCESSOR: " ${CMAKE_SYSTEM_PROCESSOR} )
-
-# is TRUE on all UNIX-like OS's, including Apple OS X and CygWin
-MESSAGE( STATUS "UNIX: " ${UNIX} )
-
-# is TRUE on Windows, including CygWin
-MESSAGE( STATUS "WIN32: " ${WIN32} )
-
-# is TRUE on Apple OS X
-MESSAGE( STATUS "APPLE: " ${APPLE} )
-
-# is TRUE when using the MinGW compiler in Windows
-MESSAGE( STATUS "MINGW: " ${MINGW} )
-
-# is TRUE on Windows when using the CygWin version of cmake
-MESSAGE( STATUS "CYGWIN: " ${CYGWIN} )
-
-# is TRUE on Windows when using a Borland compiler
-MESSAGE( STATUS "BORLAND: " ${BORLAND} )
-
-# Microsoft compiler
-MESSAGE( STATUS "MSVC: " ${MSVC} )
-MESSAGE( STATUS "MSVC_IDE: " ${MSVC_IDE} )
-MESSAGE( STATUS "MSVC60: " ${MSVC60} )
-MESSAGE( STATUS "MSVC70: " ${MSVC70} )
-MESSAGE( STATUS "MSVC71: " ${MSVC71} )
-MESSAGE( STATUS "MSVC80: " ${MSVC80} )
-MESSAGE( STATUS "CMAKE_COMPILER_2005: " ${CMAKE_COMPILER_2005} )
-
-
-# set this to true if you don't want to rebuild the object files if the rules have changed,
-# but not the actual source files or headers (e.g. if you changed the some compiler switches)
-MESSAGE( STATUS "CMAKE_SKIP_RULE_DEPENDENCY: " ${CMAKE_SKIP_RULE_DEPENDENCY} )
-
-# since CMake 2.1 the install rule depends on all, i.e. everything will be built before installing.
-# If you don't like this, set this one to true.
-MESSAGE( STATUS "CMAKE_SKIP_INSTALL_ALL_DEPENDENCY: " ${CMAKE_SKIP_INSTALL_ALL_DEPENDENCY} )
-
-# If set, runtime paths are not added when using shared libraries. Default it is set to OFF
-MESSAGE( STATUS "CMAKE_SKIP_RPATH: " ${CMAKE_SKIP_RPATH} )
-
-# set this to true if you are using makefiles and want to see the full compile and link
-# commands instead of only the shortened ones
-MESSAGE( STATUS "CMAKE_VERBOSE_MAKEFILE: " ${CMAKE_VERBOSE_MAKEFILE} )
-
-# this will cause CMake to not put in the rules that re-run CMake. This might be useful if
-# you want to use the generated build files on another machine.
-MESSAGE( STATUS "CMAKE_SUPPRESS_REGENERATION: " ${CMAKE_SUPPRESS_REGENERATION} )
-
-
-# A simple way to get switches to the compiler is to use ADD_DEFINITIONS().
-# But there are also two variables exactly for this purpose:
-
-# the compiler flags for compiling C sources
-MESSAGE( STATUS "CMAKE_C_FLAGS: " ${CMAKE_C_FLAGS} )
-
-# the compiler flags for compiling C++ sources
-MESSAGE( STATUS "CMAKE_CXX_FLAGS: " ${CMAKE_CXX_FLAGS} )
-
-
-# Choose the type of build.  Example: SET(CMAKE_BUILD_TYPE Debug)
-MESSAGE( STATUS "CMAKE_BUILD_TYPE: " ${CMAKE_BUILD_TYPE} )
-
-# if this is set to ON, then all libraries are built as shared libraries by default.
-MESSAGE( STATUS "BUILD_SHARED_LIBS: " ${BUILD_SHARED_LIBS} )
-
-# the compiler used for C files
-MESSAGE( STATUS "CMAKE_C_COMPILER: " ${CMAKE_C_COMPILER} )
-
-# the compiler used for C++ files
-MESSAGE( STATUS "CMAKE_CXX_COMPILER: " ${CMAKE_CXX_COMPILER} )
-
-# if the compiler is a variant of gcc, this should be set to 1
-MESSAGE( STATUS "CMAKE_COMPILER_IS_GNUCC: " ${CMAKE_COMPILER_IS_GNUCC} )
-
-# if the compiler is a variant of g++, this should be set to 1
-MESSAGE( STATUS "CMAKE_COMPILER_IS_GNUCXX : " ${CMAKE_COMPILER_IS_GNUCXX} )
-
-# the tools for creating libraries
-MESSAGE( STATUS "CMAKE_AR: " ${CMAKE_AR} )
-MESSAGE( STATUS "CMAKE_RANLIB: " ${CMAKE_RANLIB} )
-
-#
-#MESSAGE( STATUS ": " ${} )
-
-# ------------------------- End of Generic CMake Variable Logging ------------------
@@ -1,37 +0,0 @@
-
-# add a target to generate API documentation with Doxygen
-find_package(Doxygen)
-if(DOXYGEN_FOUND)
-	SET(OUTPUT_DIR "${CMAKE_CURRENT_BINARY_DIR}/documentation/doxygen")
-	FILE(MAKE_DIRECTORY "${OUTPUT_DIR}")
-	
-	FILE(TO_NATIVE_PATH ${OUTPUT_DIR} OUTPUT_DIR)
-	SET(OUTPUT_DIR \"${OUTPUT_DIR}\")
-	
-	SET(INPUTS "${CMAKE_CURRENT_SOURCE_DIR}/code" "${CMAKE_CURRENT_SOURCE_DIR}/freespace2" "${CMAKE_CURRENT_SOURCE_DIR}/fred2" "${CMAKE_CURRENT_SOURCE_DIR}/wxfred2")
-	
-	SET(INPUT_DIRS)
-	FOREACH(DIR IN LISTS INPUTS)
-		FILE(TO_NATIVE_PATH ${DIR} native_dir)
-		
-		LIST(APPEND INPUT_DIRS \"${native_dir}\")
-	ENDFOREACH(DIR)
-	STRING(REPLACE ";" " " INPUT_DIRS "${INPUT_DIRS}")
-	
-	CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/fs2open.Doxyfile.in
-					${CMAKE_CURRENT_BINARY_DIR}/fs2open.Doxyfile
-					@ONLY)
-	
-	add_custom_target(doxygen
-		${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/fs2open.Doxyfile
-		WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
-		COMMENT "Generating API documentation with Doxygen" VERBATIM
-	)
-	
-	set_target_properties(doxygen
-		PROPERTIES
-			FOLDER "Documentation"
-			EXCLUDE_FROM_ALL ON
-			EXCLUDE_FROM_DEFAULT_BUILD ON
-	)
-endif(DOXYGEN_FOUND)
@@ -1,16 +0,0 @@
-
-include(CheckIncludeFile)
-
-add_library(speech INTERFACE)
-
-if (WIN32)
-	CHECK_INCLUDE_FILE_CXX("sapi.h" HAVE_SAPI_H)
-	
-	if (NOT HAVE_SAPI_H)
-		message(SEND_ERROR "sapi.h could not be found on your platform. Please disable speech support.")
-	endif()
-else()
-	message(SEND_ERROR "Text to Speech is not supported on this platform!")
-endif()
-
-target_compile_definitions(speech INTERFACE -DFS2_SPEECH)
@@ -1,9 +0,0 @@
-
-
-#ifndef __FREDRC_H
-#define __FREDRC_H
-
-#define ABOUT_LINE_1 "FRED2_OPEN - FreeSpace Editor, Version @FSO_PRODUCT_VERSION_STRING@ OpenGL"
-#define MAINFRAME_CONTENTS "FRED2_OPEN @FSO_PRODUCT_VERSION_STRING@ - FreeSpace2 Mission Editor\nUntitled\nFRED2\nFreeSpace2 Missions (*.fs2)\n.fs2\nFreeSpace2Mission\nFreeSpace2 Mission"
-
-#endif // __FREDRC_H
@@ -1,7 +0,0 @@
-
-
-include(Cxx11)
-include(platformChecks)
-
-CONFIGURE_FILE(${CMAKE_CURRENT_LIST_DIR}/project.h.in ${GENERATED_SOURCE_DIR}/project.h)
-CONFIGURE_FILE(${CMAKE_CURRENT_LIST_DIR}/fred_rc.h.in ${GENERATED_SOURCE_DIR}/fred_rc.h)
@@ -1,9 +0,0 @@
-
-SET(BINARY_DESTINATION ".")
-SET(LIBRAY_DESTINATION "${BINARY_DESTINATION}")
-
-if (CMAKE_SIZEOF_VOID_P EQUAL 8)
-    set(IS_64BIT TRUE)
-else()
-    set(IS_64BIT FALSE)
-endif()
@@ -1,8 +0,0 @@
-
-SET(CODE_HEADERS ${CMAKE_SOURCE_DIR}/code)
-
-SET(FREESPACE_HEADERS ${CMAKE_SOURCE_DIR}/freespace2)
-
-SET(FRED_HEADERS ${CMAKE_SOURCE_DIR}/fred2)
-
-SET(WXFRED_HEADERS ${CMAKE_SOURCE_DIR}/wxfred2)
@@ -1,14 +0,0 @@
-
-SET(CPACK_PACKAGE_VERSION_MAJOR ${FSO_VERSION_MAJOR})
-SET(CPACK_PACKAGE_VERSION_MINOR ${FSO_VERSION_MINOR})
-SET(CPACK_PACKAGE_VERSION_PATCH ${FSO_VERSION_BUILD})
-
-SET(CPACK_PACKAGE_DESCRIPTION_SUMMARY ${FSO_PROJECT_DESCRIPTION})
-
-IF(WIN32)
-	SET(CPACK_NSIS_MUI_ICON ${FSO_INSTALLER_ICON})
-	
-	set(CPACK_NSIS_MENU_LINKS "http://www.hard-light.net/" "FreeSpace Community")
-ENDIF(WIN32)
-
-include(CPack)
@@ -1,34 +0,0 @@
-
-MESSAGE(STATUS "Doing Mac OSX specific things...")
-target_compile_definitions(platform INTERFACE APPLE_APP)
-SET(EXE_GUI_TYPE MACOSX_BUNDLE)
-
-FIND_LIBRARY(COCOA_LIBRARY Cocoa)
-
-if (NOT COCOA_LIBRARY)
-    message(FATAL_ERROR "Couldn't find Cocoa!")
-endif()
-
-target_link_libraries(platform INTERFACE ${COCOA_LIBRARY})
-
-SET(CMAKE_OSX_DEPLOYMENT_TARGET "10.9")
-
-SET(CMAKE_SKIP_RPATH FALSE)
-SET(CMAKE_BUILD_WITH_INSTALL_RPATH TRUE)
-SET(CMAKE_INSTALL_RPATH @loader_path/../Frameworks/)
-
-# Set the path where library dependencies are copied to
-SET(LIBRAY_DESTINATION "../Frameworks")
-
-set(PLATFORM_MAC TRUE CACHE INTERNAL "" FORCE)
-
-# Generate and don't strip debug symbols
-# These settings don't seem to generate debug symbols for code and Freespace2
-# so those settings are set manually in code and Freespace2's CMakeLists.txt files
-set(CMAKE_XCODE_ATTRIBUTE_GCC_GENERATE_DEBUGGING_SYMBOLS "YES")
-set(CMAKE_XCODE_ATTRIBUTE_COPY_PHASE_STRIP "NO")
-set(CMAKE_XCODE_ATTRIBUTE_STRIP_INSTALLED_PRODUCT "NO")
-set(CMAKE_XCODE_ATTRIBUTE_GCC_SYMBOLS_PRIVATE_EXTERN "NO")
-
-# Generate .dSYM file
-set(CMAKE_XCODE_ATTRIBUTE_DEBUG_INFORMATION_FORMAT "dwarf-with-dsym")
@@ -1,10 +0,0 @@
-
-target_compile_definitions(platform INTERFACE SCP_BSD)
-
-find_library(EXECINFO_LIB execinfo)
-
-if (NOT EXECINFO_LIB)
-    message(FATAL_ERROR "Couldn't find libexecinfo! Please install it and rerun the configuration.")
-else()
-    target_link_libraries(platform INTERFACE "${EXECINFO_LIB}")
-endif()
@@ -1,18 +0,0 @@
-
-target_compile_definitions(platform INTERFACE SCP_SOLARIS)
-
-find_library(SOCKET_LIB socket)
-
-if (NOT SOCKET_LIB)
-    message(FATAL_ERROR "Couldn't find libsocket! Please install it and rerun the configuration.")
-else()
-    target_link_libraries(platform INTERFACE "${SOCKET_LIB}")
-endif()
-
-find_library(NSL_LIB nsl)
-
-if (NOT NSL_LIB)
-    message(FATAL_ERROR "Couldn't find libnsl! Please install it and rerun the configuration.")
-else()
-    target_link_libraries(platform INTERFACE "${NSL_LIB}")
-endif()
@@ -1,13 +0,0 @@
-
-INCLUDE(util)
-
-MESSAGE(STATUS "Configuring UNIX specific things and stuff...")
-
-target_compile_definitions(platform INTERFACE SCP_UNIX USE_OPENAL)
-
-# Set RPATH
-set(CMAKE_SKIP_BUILD_RPATH TRUE)
-set(CMAKE_BUILD_WITH_INSTALL_RPATH TRUE)
-set(CMAKE_INSTALL_RPATH "\$ORIGIN")
-
-set(PLATFORM_UNIX TRUE CACHE INTERNAL "" FORCE)
@@ -1,27 +0,0 @@
-
-MESSAGE(STATUS "Configuring Windows specific things and stuff...")
-
-SET(WIN32_LIBS
-	comctl32
-	msacm32
-	odbc32
-	odbccp32
-	vfw32
-	winmm
-	wsock32
-	psapi
-)
-
-IF (MINGW)
-	SET(WIN32_LIBS ${WIN32_LIBS} mingw32)
-ENDIF (MINGW)
-
-target_link_libraries(platform INTERFACE ${WIN32_LIBS})
-
-target_compile_definitions(platform INTERFACE WIN32 USE_OPENAL _WINDOWS)
-
-# Specify minimum Windows version for the headers (currently this is XP)
-target_compile_definitions(platform INTERFACE NTDDI_VERSION=0x05010000 _WIN32_WINNT=0x0501)
-
-SET(EXE_GUI_TYPE WIN32)
-set(PLATFORM_WINDOWS TRUE CACHE INTERNAL "" FORCE)
@@ -1,48 +0,0 @@
-
-include(CheckFunctionExists)
-include(CheckIncludeFiles)
-include(CheckIncludeFile)
-include(CheckIncludeFileCXX)
-include(CheckLibraryExists)
-include(CheckPrototypeDefinition)
-include(CheckStructHasMember)
-include(CheckSymbolExists)
-include(CheckCXXSymbolExists)
-include(CheckTypeSize)
-
-CHECK_INCLUDE_FILE("execinfo.h" HAVE_EXECINFO_H)
-CHECK_INCLUDE_FILE_CXX("cxxabi.h" HAVE_CXXAPI_H)
-
-CHECK_TYPE_SIZE("max_align_t" MAX_ALIGN_T)
-
-if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
-    set(CMAKE_REQUIRED_FLAGS "-std=c++11") # required for g++ <= 5
-endif()
-
-set(CMAKE_EXTRA_INCLUDE_FILES "cstddef")
-CHECK_TYPE_SIZE("std::max_align_t" STD_MAX_ALIGN_T LANGUAGE CXX)
-set(CMAKE_EXTRA_INCLUDE_FILES "type_traits")
-CHECK_TYPE_SIZE("std::is_trivially_copyable<int>" STD_IS_TRIVIALLY_COPYABLE LANGUAGE CXX)
-set(CMAKE_EXTRA_INCLUDE_FILES)
-
-CHECK_TYPE_SIZE("char32_t" CHAR32_T LANGUAGE CXX)
-CHECK_TYPE_SIZE("U'b'" UNICODE_CHAR_LITERAL LANGUAGE CXX)
-
-set(CMAKE_REQUIRED_FLAGS)
-
-
-CHECK_FUNCTION_EXISTS(strcasecmp HAVE_STRCASECMP)
-CHECK_FUNCTION_EXISTS(strncasecmp HAVE_STRNCASECMP)
-
-CHECK_FUNCTION_EXISTS(_stricmp HAVE__STRICMP)
-CHECK_FUNCTION_EXISTS(_strnicmp HAVE__STRNICMP)
-
-CHECK_FUNCTION_EXISTS(strlwr HAVE_STRLWR)
-
-CHECK_INCLUDE_FILE("strings.h" HAVE_STRINGS_H)
-
-check_symbol_exists(snprintf "stdio.h" HAVE_SNPRINTF)
-check_symbol_exists(_snprintf "stdio.h" HAVE__SNPRINTF)
-
-set(PLATFORM_CHECK_HEADER "${GENERATED_SOURCE_DIR}/platformChecks.h")
-CONFIGURE_FILE(${CMAKE_CURRENT_LIST_DIR}/platformChecks.h.in "${PLATFORM_CHECK_HEADER}")
@@ -1,31 +0,0 @@
-
-#ifndef __PLATFORM_CHECKS_H__
-#define __PLATFORM_CHECKS_H__
-#pragma once
-
-#cmakedefine HAVE_EXECINFO_H
-#cmakedefine HAVE_CXXAPI_H
-#cmakedefine HAVE_MAX_ALIGN_T
-#cmakedefine HAVE_STD_MAX_ALIGN_T
-
-#cmakedefine HAVE_STD_IS_TRIVIALLY_COPYABLE
-#cmakedefine HAVE_STD_IS_TRIVIALLY_COPYABLE_ARRAY
-
-#cmakedefine01 IS_64BIT
-
-#cmakedefine01 HAVE_STRCASECMP
-#cmakedefine01 HAVE_STRNCASECMP
-#cmakedefine01 HAVE__STRICMP
-#cmakedefine01 HAVE__STRNICMP
-
-#cmakedefine01 HAVE_STRLWR
-
-#cmakedefine01 HAVE_STRINGS_H
-
-#cmakedefine01 HAVE_CHAR32_T
-#cmakedefine01 HAVE_UNICODE_CHAR_LITERAL
-
-#cmakedefine01 HAVE_SNPRINTF
-#cmakedefine01 HAVE__SNPRINTF
-
-#endif // __PLATFORM_CHECKS_H__
@@ -1,29 +0,0 @@
-
-add_library(platform INTERFACE)
-
-IF(FSO_CMAKE_DEBUG)
-	INCLUDE(debug-vars)
-ENDIF(FSO_CMAKE_DEBUG)
-
-set(PLATFORM_WINDOWS FALSE CACHE INTERNAL "" FORCE)
-set(PLATFORM_UNIX FALSE CACHE INTERNAL "" FORCE)
-set(PLATFORM_LINUX FALSE CACHE INTERNAL "" FORCE)
-set(PLATFORM_MAC FALSE CACHE INTERNAL "" FORCE)
-
-IF(WIN32)
-	INCLUDE(platform-win32)
-ELSEIF(UNIX)
-	INCLUDE(platform-unix)
-
-	IF(${CMAKE_SYSTEM_NAME} MATCHES "FreeBSD")
-		INCLUDE(platform-freebsd)
-	ELSEIF(${CMAKE_SYSTEM_NAME} MATCHES "SunOS")
-		INCLUDE(platform-solaris)
-	ELSEIF(${CMAKE_SYSTEM_NAME} MATCHES "Darwin")
-		include(platform-darwin)
-	elseif(${CMAKE_SYSTEM_NAME} MATCHES "Linux")
-		set(PLATFORM_LINUX TRUE CACHE INTERNAL "" FORCE)
-	ENDIF()
-ELSE(WIN32)
-	MESSAGE(STATUS "This platform is not supported, good luck!")
-ENDIF(WIN32)
@@ -1,17 +0,0 @@
-
-
-#ifndef __PROJECT_H
-#define __PROJECT_H
-
-#define FS_VERSION_MAJOR @FSO_VERSION_MAJOR@
-#define FS_VERSION_MINOR @FSO_VERSION_MINOR@
-#define FS_VERSION_BUILD @FSO_VERSION_BUILD@
-#define FS_VERSION_REVIS @FSO_VERSION_REVISION@
-#define FS_VERSION_REVIS_STR "@FSO_VERSION_REVISION_STR@"
-
-#define FS_VERSION_HAS_REVIS @FSO_VERSION_HAS_REVISION@
-
-#define FS_VERSION_FULL "@FSO_FULL_VERSION_STRING@"
-#define FS_PRODUCT_VERSION "@FSO_PRODUCT_VERSION_STRING@"
-
-#endif // __PROJECT_H
@@ -1,18 +0,0 @@
-
-MESSAGE(STATUS "Doing configuration specific to Apple Clang...")
-
-# TODO: Actually add Mac specific flags here...
-
-# Suppress specific warning
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -funroll-loops -fsigned-char -Wno-unknown-pragmas")
-
-# Omit "conversion from string literal to 'char *' is deprecated" warnings.
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-write-strings")
-
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-deprecated -Wno-char-subscripts")
-
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fcolor-diagnostics")
-
-set(CMAKE_CXX_FLAGS_RELEASE "-Wno-unused-variable")
-
-set(CMAKE_CXX_FLAGS_DEBUG "-Wextra -Wshadow -Wno-unused-parameter")
@@ -1,109 +0,0 @@
-# Clang
-include(EnableExtraCompilerWarnings)
-include(CheckCXXCompilerFlag)
-
-MESSAGE(STATUS "Doing configuration specific to clang...")
-
-option(CLANG_ENABLE_LEAK_CHECK "Enable -fsanitize=leak" OFF)
-option(CLANG_ENABLE_ADDRESS_SANITIZER "Enable -fsanitize=address" OFF)
-
-# These are the default values
-set(C_BASE_FLAGS "-march=native -pipe")
-set(CXX_BASE_FLAGS "-march=native -pipe")
-
-# For C and C++, the values can be overwritten independently
-if(DEFINED ENV{CXXFLAGS})
-	set(CXX_BASE_FLAGS $ENV{CXXFLAGS})
-endif()
-if(DEFINED ENV{CFLAGS})
-	set(C_BASE_FLAGS $ENV{CFLAGS})
-endif()
-
-# Initialize with an empty string to make sure we always get a clean start
-set(COMPILER_FLAGS "")
-
-# This is a slight hack since our flag setup is a bit more complicated
-_enable_extra_compiler_warnings_flags()
-set(COMPILER_FLAGS "${COMPILER_FLAGS} ${_flags}")
-
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -funroll-loops -fsigned-char -Wno-unknown-pragmas")
-
-# Omit "argument unused during compilation" when clang is used with ccache.
-if(${CMAKE_CXX_COMPILER} MATCHES "ccache")
-	set(COMPILER_FLAGS "${COMPILER_FLAGS} -Qunused-arguments")
-endif()
-
-if ("${CMAKE_GENERATOR}" STREQUAL "Ninja")
-	# Force color diagnostics for Ninja generator
-	set(COMPILER_FLAGS "${COMPILER_FLAGS} -fdiagnostics-color")
-endif()
-
-# Start with an empty list
-set(SANITIZE_FLAGS)
-
-if(CLANG_ENABLE_ADDRESS_SANITIZER)
-	set(CMAKE_REQUIRED_FLAGS "-fsanitize=address")
-	CHECK_C_COMPILER_FLAG("-fsanitize=address" SUPPORTS_SANITIZE_ADDRESS)
-
-	if (SUPPORTS_SANITIZE_ADDRESS)
-		set(SANITIZE_FLAGS ${SANITIZE_FLAGS} "address")
-	endif()
-endif()
-if (CLANG_ENABLE_LEAK_CHECK)
-	check_linker_flag("-fsanitize=leak" SUPPORTS_FSANITIZE_LEAK)
-
-	if (SUPPORTS_FSANITIZE_LEAK)
-		set(SANITIZE_FLAGS ${SANITIZE_FLAGS} "leak")
-	endif()
-endif()
-
-string(REPLACE ";" "," SANITIZE_FLAGS "${SANITIZE_FLAGS}")
-if (NOT "${SANITIZE_FLAGS}" STREQUAL "")
-	set(SANITIZE_FLAGS "-fsanitize=${SANITIZE_FLAGS}")
-endif()
-
-set(COMPILER_FLAGS "${COMPILER_FLAGS} ${SANITIZE_FLAGS}")
-
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wformat-security")
-
-# Dear Clang, please tell us if a function does not return a value since that part of the standard is stupid!
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wreturn-type")
-
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wno-char-subscripts")
-
-check_cxx_compiler_flag(-Wshift-negative-value SUPPORTS_SHIFT_NEGATIVE_VALUE)
-if(SUPPORTS_SHIFT_NEGATIVE_VALUE)
-	set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wno-shift-negative-value")
-endif()
-
-set(COMPILER_FLAGS_RELEASE "-O2 -Wno-unused-variable -Wno-unused-parameter")
-
-set(COMPILER_FLAGS_DEBUG "-O0 -g -Wshadow")
-
-# Always use the base flags and add our compiler flags at the bacl
-set(CMAKE_CXX_FLAGS "${CXX_BASE_FLAGS} ${COMPILER_FLAGS}")
-set(CMAKE_C_FLAGS "${C_BASE_FLAGS} ${COMPILER_FLAGS}")
-
-set(CMAKE_CXX_FLAGS_RELEASE ${COMPILER_FLAGS_RELEASE})
-set(CMAKE_C_FLAGS_RELEASE ${COMPILER_FLAGS_RELEASE})
-
-set(CMAKE_CXX_FLAGS_DEBUG ${COMPILER_FLAGS_DEBUG})
-set(CMAKE_C_FLAGS_DEBUG ${COMPILER_FLAGS_DEBUG})
-
-
-set(CMAKE_EXE_LINKER_FLAGS "")
-
-if (SANITIZE_FLAGS)
-	set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${SANITIZE_FLAGS}")
-endif()
-
-set(CMAKE_EXE_LINKER_FLAGS_RELEASE "")
-set(CMAKE_EXE_LINKER_FLAGS_DEBUG "-g -rdynamic")
-
-if (FSO_FATAL_WARNINGS)
-	# Make warnings fatal if the right variable is set
-	target_compile_options(compiler INTERFACE "-Werror")
-endif()
-
-# Always define this to make sure that the fixed width format macros are available
-target_compile_definitions(compiler INTERFACE __STDC_FORMAT_MACROS)
@@ -1,142 +0,0 @@
-
-include(EnableExtraCompilerWarnings)
-include(CheckCCompilerFlag)
-include(util)
-
-MESSAGE(STATUS "Doing configuration specific to gcc...")
-
-option(GCC_ENABLE_LEAK_CHECK "Enable -fsanitize=leak" OFF)
-option(GCC_ENABLE_ADDRESS_SANITIZER "Enable -fsanitize=address" OFF)
-option(GCC_ENABLE_SANITIZE_UNDEFINED "Enable -fsanitize=undefined" OFF)
-
-# These are the default values
-set(C_BASE_FLAGS "-march=native -pipe")
-set(CXX_BASE_FLAGS "-march=native -pipe")
-
-# For C and C++, the values can be overwritten independently
-if(DEFINED ENV{CFLAGS})
-	set(C_BASE_FLAGS $ENV{CFLAGS})
-endif()
-if(DEFINED ENV{CXXFLAGS})
-	set(CXX_BASE_FLAGS $ENV{CXXFLAGS})
-endif()
-
-# Initialize with an empty string to make sure we always get a clean start
-set(COMPILER_FLAGS "")
-
-# This is a slight hack since our flag setup is a bit more complicated
-_enable_extra_compiler_warnings_flags()
-set(COMPILER_FLAGS "${COMPILER_FLAGS} ${_flags}")
-
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -funroll-loops -fsigned-char -Wno-unknown-pragmas")
-
-# Place each function and data in its own section so the linker can
-# perform dead code elimination
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -fdata-sections -ffunction-sections")
-
-if ("${CMAKE_GENERATOR}" STREQUAL "Ninja")
-	# Force color diagnostics for Ninja generator
-	CHECK_C_COMPILER_FLAG(-fdiagnostics-color SUPPORTS_DIAGNOSTIC_COLOR)
-
-	if(SUPPORTS_DIAGNOSTIC_COLOR)
-		set(COMPILER_FLAGS "${COMPILER_FLAGS} -fdiagnostics-color")
-	endif()
-endif()
-
-# Start with an empty list
-set(SANITIZE_FLAGS)
-
-if(GCC_ENABLE_ADDRESS_SANITIZER)
-	set(CMAKE_REQUIRED_FLAGS "-fsanitize=address")
-	CHECK_C_COMPILER_FLAG("-fsanitize=address" SUPPORTS_SANITIZE_ADDRESS)
-
-	if (SUPPORTS_SANITIZE_ADDRESS)
-		set(SANITIZE_FLAGS ${SANITIZE_FLAGS} "address")
-	endif()
-endif()
-if (GCC_ENABLE_LEAK_CHECK)
-	check_linker_flag("-fsanitize=leak" SUPPORTS_FSANITIZE_LEAK)
-
-	if (SUPPORTS_FSANITIZE_LEAK)
-		set(SANITIZE_FLAGS ${SANITIZE_FLAGS} "leak")
-	endif()
-endif()
-if (GCC_ENABLE_SANITIZE_UNDEFINED)
-	check_linker_flag("-fsanitize=undefined" SUPPORTS_SANITIZE_UNDEFINED)
-
-	if (SUPPORTS_SANITIZE_UNDEFINED)
-		set(SANITIZE_FLAGS ${SANITIZE_FLAGS} "undefined")
-	endif()
-endif()
-
-string(REPLACE ";" "," SANITIZE_FLAGS "${SANITIZE_FLAGS}")
-if (NOT "${SANITIZE_FLAGS}" STREQUAL "")
-	set(SANITIZE_FLAGS "-fsanitize=${SANITIZE_FLAGS}")
-endif()
-
-set(COMPILER_FLAGS "${COMPILER_FLAGS} ${SANITIZE_FLAGS}")
-
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wformat-security")
-
-# Dear GCC, please tell us if a function does not return a value since that part of the standard is stupid!
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wreturn-type")
-
-set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wno-deprecated -Wno-char-subscripts")
-
-# These two warnings cause a lot of false-positives in the FSO code base
-check_cxx_compiler_flag(-Wstringop-truncation SUPPORTS_STRINGOP_TRUNCATION)
-if(SUPPORTS_STRINGOP_TRUNCATION)
-	set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wno-stringop-truncation")
-endif()
-
-check_cxx_compiler_flag(-Wstringop-overflow SUPPORTS_STRINGOP_OVERFLOW)
-if(SUPPORTS_STRINGOP_TRUNCATION)
-	set(COMPILER_FLAGS "${COMPILER_FLAGS} -Wno-stringop-overflow")
-endif()
-
-set(COMPILER_FLAGS_RELEASE "-O2 -Wno-unused-variable -Wno-unused-but-set-variable -Wno-array-bounds -Wno-empty-body -Wno-clobbered  -Wno-unused-parameter")
-
-set(COMPILER_FLAGS_DEBUG "-O0 -g -Wshadow")
-
-# Always use the base flags and add our compiler flags at the bacl
-set(CMAKE_CXX_FLAGS "${CXX_BASE_FLAGS} ${COMPILER_FLAGS}")
-set(CMAKE_C_FLAGS "${C_BASE_FLAGS} ${COMPILER_FLAGS}")
-
-set(CMAKE_CXX_FLAGS_RELEASE ${COMPILER_FLAGS_RELEASE})
-set(CMAKE_C_FLAGS_RELEASE ${COMPILER_FLAGS_RELEASE})
-
-set(CMAKE_CXX_FLAGS_DEBUG ${COMPILER_FLAGS_DEBUG})
-set(CMAKE_C_FLAGS_DEBUG ${COMPILER_FLAGS_DEBUG})
-
-set(CMAKE_EXE_LINKER_FLAGS "")
-
-IF (MINGW)
-	SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -static -static-libgcc -static-libstdc++ -Wl,--enable-auto-import")
-	target_compile_definitions(compiler INTERFACE __USE_MINGW_ANSI_STDIO=1)
-ENDIF(MINGW)
-
-if (SANITIZE_FLAGS)
-	set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${SANITIZE_FLAGS}")
-endif()
-
-set(CMAKE_EXE_LINKER_FLAGS_RELEASE "")
-set(CMAKE_EXE_LINKER_FLAGS_DEBUG "-g")
-IF(NOT MINGW)
-	SET(CMAKE_EXE_LINKER_FLAGS_DEBUG "${CMAKE_EXE_LINKER_FLAGS_DEBUG} -rdynamic")
-	# Allow the linker to perform dead code elimination; this is considered
-	# experimental for COFF and PE formats and thus disabled for Windows builds
-	# (https://sourceware.org/binutils/docs/ld/Options.html)
-	SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--gc-sections")
-ENDIF(NOT MINGW)
-
-IF(${CMAKE_SYSTEM_NAME} MATCHES "SunOS")
-	SET(CMAKE_EXE_LINKER_FLAGS "-Wl,-zignore")
-ENDIF(${CMAKE_SYSTEM_NAME} MATCHES "SunOS")
-
-if (FSO_FATAL_WARNINGS)
-	# Make warnings fatal if the right variable is set
-	target_compile_options(compiler INTERFACE "-Werror")
-endif()
-
-# Always define this to make sure that the fixed width format macros are available
-target_compile_definitions(compiler INTERFACE __STDC_FORMAT_MACROS=1)
@@ -1,145 +0,0 @@
-
-include(EnableExtraCompilerWarnings)
-include(CheckCXXCompilerFlag)
-include(util)
-
-MESSAGE(STATUS "Doing configuration specific to visual studio...")
-
-set_property(GLOBAL PROPERTY DEBUG_CONFIGURATIONS Debug)
-
-option(MSVC_USE_RUNTIME_DLL "Use the dynamically linked version of the runtime" OFF)
-option(MSVC_RELEASE_DEBUGGING "Set options that allow to debug release builds" OFF)
-
-MARK_AS_ADVANCED(FORCE MSVC_USE_RUNTIME_DLL)
-MARK_AS_ADVANCED(FORCE MSVC_RELEASE_DEBUGGING)
-
-# These are the warnings we disable
-set(WARNING_FLAGS
-	/wd4100 # unreferenced formal parameters
-	/wd4127 # constant conditional (assert)
-	/wd4201 # nonstandard extension used: nameless struct/union (happens a lot in Windows include headers)
-	/wd4290 # C++ exception specification ignored except to indicate a function is not __declspec(nothrow)
-	/wd4390 # empty control statement (triggered by nprintf and mprintf's inside of one-line if's, etc)
-	/wd4410 # illegal size for operand... ie... 	fxch st(1)
-	/wd4511 # copy constructor could not be generated (happens a lot in Windows include headers)
-	/wd4512 # assignment operator could not be generated (happens a lot in Windows include headers)
-	/wd4514 # unreferenced inline function removed
-	/wd4611 # _setjmp warning.  Since we use setjmp alot, and we don't really use constructors or destructors, this warning doesn't really apply to us.
-	/wd4663 # C++ language change (template specification)
-	/wd4710 # is inline function not expanded (who cares?)
-	/wd4711 # tells us an inline function was expanded (who cares?)
-	/wd4786 # is identifier truncated to 255 characters (happens all the time in Microsoft #includes) -- Goober5000"
-	/wd4996 # deprecated strcpy, strcat, sprintf, etc. (from MSVC 2005) - taylor
-	/wd4311 # Disables warnings about casting pointer types to ints. The funny thing is these warnings can't be resolved, just disabled... - m!m
-	/wd4302 # Same as above - m!m
-	/wd4366 # The result of the unary '&' operator may be unaligned - m!m
-	/wd4592 # "symbol will be dynamically initialized" is being generated by a compiler bug, see https://stackoverflow.com/a/34027257 for an explanation - m!m
-	$<$<CONFIG:Release>:/wd4101> # In release mode there are unreferenced variables because debug needs them
-	/wd4995 # "'vsprintf': name was marked as #pragma deprecated" is being caused by our custom definition of vsprintf. I have no idea what causes this or how to fix it - m!m
-	/wd4723 # "potential divide by 0" is caused by some code that definitely will not divide by zero - m!m
-)
-
-target_compile_options(compiler INTERFACE ${WARNING_FLAGS})
-
-# Base
-set(CMAKE_C_FLAGS "/MP /GS- /analyze- /Zc:wchar_t /errorReport:prompt /WX- /Zc:forScope /Gd /EHsc /nologo /Zm200")
-set(CMAKE_CXX_FLAGS "/MP /GS- /analyze- /Zc:wchar_t /errorReport:prompt /WX- /Zc:forScope /Gd /EHsc /nologo /Zm200")
-
-set(CMAKE_EXE_LINKER_FLAGS "/MANIFEST /DYNAMICBASE:NO /SAFESEH:NO /ERRORREPORT:PROMPT /NOLOGO")
-set(CMAKE_STATIC_LINKER_FLAGS "")
-
-# Release
-set(CMAKE_C_FLAGS_RELEASE "/GL /W2 /Gy- /Ox /Ot /Ob2 /fp:precise /GF /Oy /Oi /Zi /W3")
-set(CMAKE_CXX_FLAGS_RELEASE "/GL /W2 /Gy- /Ox /Ot /Ob2 /fp:precise /GF /Oy /Oi /Zi /W3")
-set(CMAKE_EXE_LINKER_FLAGS_RELEASE "/OPT:REF /LTCG /INCREMENTAL:NO")
-set(CMAKE_STATIC_LINKER_FLAGS_RELEASE "/LTCG")
-
-globally_enable_extra_compiler_warnings()
-
-if (MSVC_RELEASE_DEBUGGING)
-	CHECK_CXX_COMPILER_FLAG("/Zo" MSVC_COMPILER_SUPPORTS_ARCH_ZO)
-
-	if (MSVC_COMPILER_SUPPORTS_ARCH_ZO)
-		set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /Zo")
-		set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /Zo")
-	endif()
-	
-	set(CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} /DEBUG")
-endif()
-
-IF(MSVC_USE_RUNTIME_DLL)
-	set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /MD")
-	set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /MD")
-ELSE(MSVC_USE_RUNTIME_DLL)
-	set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /MT")
-	set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /MT")
-ENDIF(MSVC_USE_RUNTIME_DLL)
-
-# Debug
-set(CMAKE_C_FLAGS_DEBUG "/W4 /Gy /Zi /Od /RTC1 /Gd /Oy-")
-set(CMAKE_CXX_FLAGS_DEBUG "/W4 /Gy /Zi /Od /RTC1 /Gd /Oy-")
-set(CMAKE_EXE_LINKER_FLAGS_DEBUG "/DEBUG /INCREMENTAL:NO /MAPINFO:EXPORTS /NODEFAULTLIB:libcmt.lib")
-
-IF(MSVC_USE_RUNTIME_DLL)
-	set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MDd")
-	set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /MDd")
-ELSE(MSVC_USE_RUNTIME_DLL)
-	set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MTd")
-	set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /MTd")
-ENDIF(MSVC_USE_RUNTIME_DLL)
-
-INCLUDE(MSVCMultipleProcessCompile)
-
-# Visual Studio supports compiling for multiple vector instruction sets
-SET(POSSIBLE_INSTUCTION_SETS "" SSE SSE2 AVX AVX2)
-
-if (NOT DEFINED MSVC_SIMD_INSTRUCTIONS)
-	detect_simd_instructions(MSVC_DETECTED_SIMD_INSTRUCTIONS)
-
-	SET(MSVC_SIMD_INSTRUCTIONS "${MSVC_DETECTED_SIMD_INSTRUCTIONS}" CACHE FILEPATH "The SIMD instructions which will be used, possible values are ${POSSIBLE_INSTUCTION_SETS}")
-	MARK_AS_ADVANCED(FORCE MSVC_SIMD_INSTRUCTIONS)
-endif()
-set(FSO_INSTRUCTION_SET ${MSVC_SIMD_INSTRUCTIONS})
-
-LIST(FIND POSSIBLE_INSTUCTION_SETS "${MSVC_SIMD_INSTRUCTIONS}" SET_INDEX)
-
-if (SET_INDEX LESS 0)
-	MESSAGE(STATUS "An invalid instruction set was specified, defaulting to no special compiler options.")
-else()
-	IF (NOT SET_INDEX EQUAL 0)
-		SET(FOUND)
-
-		FOREACH(list_index RANGE ${SET_INDEX} 1)
-			list(GET POSSIBLE_INSTUCTION_SETS ${list_index} _simd_set)
-			CHECK_CXX_COMPILER_FLAG("/arch:${_simd_set}" COMPILER_SUPPORTS_ARCH_${_simd_set})
-
-			IF(COMPILER_SUPPORTS_ARCH_${_simd_set})
-				set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /arch:${_simd_set}")
-				set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:${_simd_set}")
-
-				SET(FOUND TRUE)
-				BREAK()
-			ENDIF()
-		ENDFOREACH(list_index)
-
-		IF(NOT FOUND)
-			# Don't set anything, it will likely not work
-			MESSAGE(STATUS "Your compiler does not support any optimization flags, defaulting to none")
-		ENDIF(NOT FOUND)
-	ELSE()
-		CHECK_CXX_COMPILER_FLAG("/arch:IA32" COMPILER_SUPPORTS_ARCH_IA32)
-
-		IF(COMPILER_SUPPORTS_ARCH_IA32)
-			set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /arch:IA32")
-			set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /arch:IA32")
-		ENDIF(COMPILER_SUPPORTS_ARCH_IA32)
-	ENDIF()
-endif()
-
-target_compile_definitions(compiler INTERFACE _CRT_SECURE_NO_DEPRECATE _CRT_SECURE_NO_WARNINGS _SECURE_SCL=0 NOMINMAX
-		"$<$<CONFIG:FastDebug>:_ITERATOR_DEBUG_LEVEL=0>" _SILENCE_TR1_NAMESPACE_DEPRECATION_WARNING)
-
-if (FSO_FATAL_WARNINGS)
-	# Make warnings fatal if the right variable is set
-	target_compile_options(compiler INTERFACE "/WX")
-endif()
@@ -1,33 +0,0 @@
-
-# File to execute compiler specific commands
-
-add_library(compiler INTERFACE)
-
-target_compile_definitions(compiler INTERFACE "$<$<CONFIG:Release>:NDEBUG>;$<$<CONFIG:Debug>:_DEBUG>;$<$<CONFIG:FastDebug>:_DEBUG>")
-
-if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-	include(toolchain-gcc)
-elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "MSVC")
-	include(toolchain-msvc)
-elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
-	include(toolchain-clang)
-elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "AppleClang")
-	include(toolchain-apple-clang)
-ELSE("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-	MESSAGE(STATUS "No special handling for this compiler present, good luck!")
-ENDIF("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-
-# Copy release settings to FastDebug
-set(CMAKE_C_FLAGS_FASTDEBUG "${CMAKE_C_FLAGS_RELEASE}")
-set(CMAKE_CXX_FLAGS_FASTDEBUG "${CMAKE_CXX_FLAGS_RELEASE}")
-set(CMAKE_EXE_LINKER_FLAGS_FASTDEBUG "${CMAKE_EXE_LINKER_FLAGS_RELEASE}")
-set(CMAKE_STATIC_LINKER_FLAGS_FASTDEBUG "${CMAKE_STATIC_LINKER_FLAGS_RELEASE}")
-
-if (MSVC)
-	# Adjust runtime library
-	string(REPLACE "/MD" "/MDd" CMAKE_C_FLAGS_FASTDEBUG "${CMAKE_C_FLAGS_FASTDEBUG}")
-	string(REPLACE "/MT" "/MTd" CMAKE_C_FLAGS_FASTDEBUG "${CMAKE_C_FLAGS_FASTDEBUG}")
-	
-	string(REPLACE "/MD" "/MDd" CMAKE_CXX_FLAGS_FASTDEBUG "${CMAKE_CXX_FLAGS_FASTDEBUG}")
-	string(REPLACE "/MT" "/MTd" CMAKE_CXX_FLAGS_FASTDEBUG "${CMAKE_CXX_FLAGS_FASTDEBUG}")
-endif()
@@ -1,237 +0,0 @@
-
-include(CheckCCompilerFlag)
-
-FUNCTION(MAKE_CACHE_INTERNAL VARIABLE)
-	SET(${VARIABLE} ${${VARIABLE}} CACHE INTERNAL "Internal cache variable")
-ENDFUNCTION(MAKE_CACHE_INTERNAL)
-
-FUNCTION(ADD_IMPORTED_LIB NAME INCLUDES LIBS)
-	ADD_LIBRARY(${NAME} INTERFACE)
-
-	target_link_libraries(${NAME} INTERFACE "${LIBS}")
-
-	target_include_directories(${NAME} SYSTEM INTERFACE "${INCLUDES}")
-ENDFUNCTION(ADD_IMPORTED_LIB)
-
-MACRO(PKG_CONFIG_LIB_RESOLVE NAME OUTVAR)
-	SET(${OUTVAR} "")
-	foreach(lib ${${NAME}_LIBRARIES})
-		find_library(${lib}_LIBRARY
-					NAMES ${lib}
-					HINTS ${${NAME}_LIBDIR} ${${NAME}_LIBRARY_DIRS}
-		)
-
-		if (NOT ${${lib}_LIBRARY} MATCHES ".*NOTFOUND.*")
-			SET(${OUTVAR} ${${OUTVAR}} ${${lib}_LIBRARY})
-		endif (NOT ${${lib}_LIBRARY} MATCHES ".*NOTFOUND.*")
-	endforeach(lib)
-ENDMACRO(PKG_CONFIG_LIB_RESOLVE)
-
-# Copy from http://cmake.3232098.n2.nabble.com/RFC-cmake-analog-to-AC-SEARCH-LIBS-td7585423.html
-INCLUDE (CheckFunctionExists)
-INCLUDE (CheckLibraryExists)
-
-MACRO (CMAKE_SEARCH_LIBS v_func v_lib func)
-    CHECK_FUNCTION_EXISTS (${func} ${v_func})
-    IF (NOT ${v_func})
-        FOREACH (lib ${ARGN})
-            CHECK_LIBRARY_EXISTS (${lib} ${func} "" "HAVE_${func}_IN_${lib}")
-            IF (${HAVE_${func}_IN_${lib}})
-                SET (${v_func} TRUE)
-                SET (${v_lib} "${lib}" CACHE INTERNAL "Library providing ${func}")
-                BREAK()
-            ENDIF (${HAVE_${func}_IN_${lib}})
-        ENDFOREACH (lib)
-    ENDIF (NOT ${v_func})
-ENDMACRO (CMAKE_SEARCH_LIBS)
-# End copy
-
-FUNCTION(EP_CHECK_FILE_EXISTS FILE OUTVAR TARGET NAME COMMAND WORKING_DIR)
-	string (REPLACE ";" " " COMMAND_STR "${COMMAND}")
-	IF(WIN32)
-		# Do something special for windows...
-		SET(COMMAND "cmd /C \"${COMMAND_STR}\"")
-	ELSE(WIN32)
-		SET(COMMAND "${COMMAND_STR}")
-	ENDIF(WIN32)
-
-	FILE(WRITE "${CMAKE_CURRENT_BINARY_DIR}/${TARGET}/${NAME}" "
-IF(EXISTS \"${CMAKE_CURRENT_BINARY_DIR}/${TARGET}/${FILE}\")
-	MESSAGE(\"'${CMAKE_CURRENT_BINARY_DIR}/${TARGET}/${FILE}' already exists, nothing to be done.\")
-ELSE(EXISTS \"${CMAKE_CURRENT_BINARY_DIR}/${TARGET}/${FILE}\")
-	execute_process(COMMAND ${COMMAND} WORKING_DIRECTORY \"${CMAKE_CURRENT_BINARY_DIR}/${TARGET}/${WORKING_DIR}\")
-ENDIF(EXISTS \"${CMAKE_CURRENT_BINARY_DIR}/${TARGET}/${FILE}\")
-")
-
-	SET(${OUTVAR} "${CMAKE_COMMAND}" -P ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}/${NAME} PARENT_SCOPE)
-ENDFUNCTION(EP_CHECK_FILE_EXISTS)
-
-MACRO(COPY_FILE_TO_TARGET _target _file)
-	if(UNIX)
-		ADD_CUSTOM_COMMAND(
-			TARGET ${_target} POST_BUILD
-			COMMAND cp -a "${_file}"  "$<TARGET_FILE_DIR:${_target}>/${LIBRAY_DESTINATION}/"
-			COMMENT "copying '${_file}'..."
-		)
-	else()
-		ADD_CUSTOM_COMMAND(
-			TARGET ${_target} POST_BUILD
-			COMMAND ${CMAKE_COMMAND} -E copy_if_different "${_file}"  "$<TARGET_FILE_DIR:${_target}>/${LIBRAY_DESTINATION}/"
-			COMMENT "copying '${_file}'..."
-		)
-	endif()
-endmacro(COPY_FILE_TO_TARGET)
-
-MACRO(COPY_FILES_TO_TARGET _target)
-	if(UNIX)
-		ADD_CUSTOM_COMMAND(
-			TARGET ${_target} POST_BUILD
-			COMMAND mkdir -p "$<TARGET_FILE_DIR:${_target}>/${LIBRAY_DESTINATION}/"
-			COMMENT "Creating '$<TARGET_FILE_DIR:${_target}>/${LIBRAY_DESTINATION}/'..."
-		)
-	endif()
-	
-	FOREACH(file IN LISTS TARGET_COPY_FILES)
-		COPY_FILE_TO_TARGET("${_target}" "${file}")
-	ENDFOREACH(file)
-ENDMACRO(COPY_FILES_TO_TARGET)
-
-macro(_clear_old_libraries_state)
-	set(is_debug FALSE)
-	set(is_optimized FALSE)
-endmacro(_clear_old_libraries_state)
-
-function(CONVERT_OLD_LIBRARIES)
-	_clear_old_libraries_state()
-	set(out_list)
-	foreach(lib ${ARGV})
-		if ("${lib}" STREQUAL "debug")
-			_clear_old_libraries_state()
-			set(is_debug TRUE)
-		elseif("${lib}" STREQUAL "optimized")
-			_clear_old_libraries_state()
-			set(is_optimized TRUE)
-		elseif("${lib}" STREQUAL "general")
-			_clear_old_libraries_state()
-		else("${lib}" STREQUAL "debug")
-			# Expecting normal library
-			if(is_debug)
-				list(APPEND out_list "$<$<CONFIG:Debug>:${lib}>" "$<$<CONFIG:FastDebug>:${lib}>")
-			elseif(is_optimized)
-				list(APPEND out_list "$<$<CONFIG:Release>:${lib}>")
-			else(is_debug)
-				list(APPEND out_list "${lib}")
-			endif(is_debug)
-		endif("${lib}" STREQUAL "debug")
-	endforeach(lib)
-
-	set(CONVERTED_LIBRARIES ${out_list} PARENT_SCOPE)
-endfunction(CONVERT_OLD_LIBRARIES)
-
-macro(set_policy policy value)
-	if (POLICY ${policy})
-		cmake_policy(SET ${policy} ${value})
-	endif ()
-endmacro(set_policy)
-
-macro(set_if_not_defined VAR VALUE)
-    if (NOT DEFINED ${VAR})
-        set(${VAR} ${VALUE})
-    endif()
-endmacro(set_if_not_defined)
-
-macro(configure_cotire target)
-	if(ENABLE_COTIRE)
-		# Disable unity build as it doesn't work well for us
-		set_target_properties(${target} PROPERTIES COTIRE_ADD_UNITY_BUILD FALSE)
-
-		cotire(${target})
-	endif()
-endmacro(configure_cotire)
-
-macro(add_target_copy_files)
-	foreach(file ${ARGN})
-		if (IS_DIRECTORY "${file}")
-			INSTALL(DIRECTORY ${file}
-					DESTINATION ${LIBRAY_DESTINATION}
-					)
-		else()
-			INSTALL(FILES ${file}
-					DESTINATION ${LIBRAY_DESTINATION}
-					)
-		endif()
-
-		SET(TARGET_COPY_FILES ${TARGET_COPY_FILES} ${file} CACHE INTERNAL "" FORCE)
-	endforeach()
-endmacro(add_target_copy_files)
-
-function(detect_simd_instructions _out_var)
-	if(CMAKE_CROSSCOMPILING)
-		set(${_out_var} "" PARENT_SCOPE)
-	else()
-		message(STATUS "Detecting SIMD features of current CPU...")
-		TRY_RUN(RUN_RESULT COMPILE_RESULT "${CMAKE_BINARY_DIR}/temp" "${CMAKE_SOURCE_DIR}/cmake/cpufeatures.cpp"
-			RUN_OUTPUT_VARIABLE FEATURE_OUTPUT)
-		
-		IF(COMPILE_RESULT)
-			MESSAGE(STATUS "Detected compatibility for the ${FEATURE_OUTPUT} feature set.")
-			SET(${_out_var} ${FEATURE_OUTPUT} PARENT_SCOPE)
-		ELSE(COMPILE_RESULT)
-			MESSAGE("Compilation of CPU feature detector failed, please set the instruction set manually.")
-			set(${_out_var} "" PARENT_SCOPE)
-		ENDIF(COMPILE_RESULT)
-	endif()
-endfunction()
-
-function (check_linker_flag _flag _out_var)
-	SET(CMAKE_REQUIRED_FLAGS "${_flag}")
-	CHECK_C_COMPILER_FLAG("" ${_out_var})
-endfunction(check_linker_flag)
-
-# Suppresses warnings for the specified target
-function(suppress_warnings _target)
-    if (MSVC)
-        target_compile_options(${_target} PRIVATE "/W0")
-	else()
-        # Assume everything else uses GCC style options
-		target_compile_options(${_target} PRIVATE "-w")
-    endif()
-endfunction(suppress_warnings)
-
-
-function(list_target_dependencies _target _out_var)
-	set(out_list)
-	set(work_libs ${_target})
-	list(LENGTH work_libs libs_length)
-
-	while(libs_length GREATER 0)
-		list(GET work_libs 0 current)
-		list(REMOVE_AT work_libs 0)
-		list(APPEND out_list ${current})
-
-		get_target_property(current_libs ${current} INTERFACE_LINK_LIBRARIES)
-
-		if(current_libs)
-			foreach(lib ${current_libs})
-				if (TARGET ${lib})
-					list(APPEND work_libs ${lib})
-				endif (TARGET ${lib})
-			endforeach(lib)
-		endif(current_libs)
-
-		list(LENGTH work_libs libs_length)
-	endwhile(libs_length GREATER 0)
-
-	list(REMOVE_DUPLICATES out_list)
-	set(${_out_var} ${out_list} PARENT_SCOPE)
-endfunction(list_target_dependencies)
-
-macro(add_file_folder FOLDER_NAME)
-	string(MAKE_C_IDENTIFIER "${FOLDER_NAME}" VARIABLE_NAME)
-	set(files_${VARIABLE_NAME} ${files_${VARIABLE_NAME}} ${ARGN})
-
-	string(REPLACE "/" "\\" FIXED_FOLDER_FILE "${FOLDER_NAME}")
-
-	source_group("${FIXED_FOLDER_FILE}" FILES ${ARGN})
-	set(source_files ${source_files} ${ARGN})
-endmacro(add_file_folder)
@@ -1,52 +0,0 @@
-
-include(util)
-
-if (EXISTS "${PROJECT_SOURCE_DIR}/version_override.cmake")
-    # This allows to override the values by using a special file
-    include("${PROJECT_SOURCE_DIR}/version_override.cmake")
-endif()
-
-set_if_not_defined(FSO_VERSION_MAJOR 3)
-set_if_not_defined(FSO_VERSION_MINOR 8)
-set_if_not_defined(FSO_VERSION_BUILD 1)
-
-# A numeric revision e.g. the CI build number
-set_if_not_defined(FSO_VERSION_REVISION 0)
-
-# A generic revision string, can be anything
-set_if_not_defined(FSO_VERSION_REVISION_STR "${FSO_VERSION_REVISION}")
-
-if("${FSO_VERSION_REVISION}" STREQUAL "0" AND "${FSO_VERSION_REVISION_STR}" STREQUAL "${FSO_VERSION_REVISION}")
-    set(FSO_VERSION_HAS_REVISION 0)
-else()
-    set(FSO_VERSION_HAS_REVISION 1)
-endif()
-
-set(FSO_FULL_VERSION_STRING "${FSO_VERSION_MAJOR}.${FSO_VERSION_MINOR}.${FSO_VERSION_BUILD}")
-set(FSO_PRODUCT_VERSION_STRING "${FSO_FULL_VERSION_STRING}")
-
-if (FSO_VERSION_HAS_REVISION)
-    set(FSO_FULL_VERSION_STRING "${FSO_FULL_VERSION_STRING}.${FSO_VERSION_REVISION_STR}")
-endif()
-
-IF(NOT FSO_VERSION_HAS_REVISION)
-    SET(FSO_BINARY_SUFFIX "${FSO_VERSION_MAJOR}_${FSO_VERSION_MINOR}_${FSO_VERSION_BUILD}")
-ELSE()
-    SET(FSO_BINARY_SUFFIX "${FSO_VERSION_MAJOR}_${FSO_VERSION_MINOR}_${FSO_VERSION_BUILD}_${FSO_VERSION_REVISION_STR}")
-ENDIF()
-
-IF(IS_64BIT)
-	# This is a 64-bit builds
-    SET(FSO_BINARY_SUFFIX "${FSO_BINARY_SUFFIX}_x64")
-ENDIF()
-
-IF (NOT "${FSO_INSTRUCTION_SET}" STREQUAL "")
-    SET(FSO_BINARY_SUFFIX "${FSO_BINARY_SUFFIX}_${FSO_INSTRUCTION_SET}")
-ENDIF()
-
-IF (NOT "${FSO_BUILD_POSTFIX}" STREQUAL "")
-    SET(FSO_BINARY_SUFFIX "${FSO_BINARY_SUFFIX}_${FSO_BUILD_POSTFIX}")
-ENDIF()
-
-set(CONFIG_POSTFIX "$<$<CONFIG:Release>:>$<$<CONFIG:Debug>:-DEBUG>$<$<CONFIG:FastDebug>:-FASTDBG>")
-set(FSO_BINARY_SUFFIX "${FSO_BINARY_SUFFIX}${CONFIG_POSTFIX}")
@@ -1,87 +0,0 @@
-
-INCLUDE(source_groups.cmake)
-
-INCLUDE(voice_rec.cmake)
-
-ADD_LIBRARY(code STATIC ${source_files} ${VOICE_REC_FILES})
-
-target_compile_features(code PUBLIC ${REQUIRED_CXX_FEATURES})
-
-INCLUDE(default_files.cmake)
-
-if (MSVC)
-	target_compile_definitions(code PUBLIC "PDB_DEBUGGING=1")
-endif(MSVC)
-
-TARGET_INCLUDE_DIRECTORIES(code PUBLIC ${CODE_HEADERS})
-TARGET_INCLUDE_DIRECTORIES(code PUBLIC ${FREESPACE_HEADERS})
-
-TARGET_INCLUDE_DIRECTORIES(code PUBLIC ${GENERATED_SOURCE_DIR})
-TARGET_INCLUDE_DIRECTORIES(code PUBLIC ${GENERATED_SOURCE_DIR}/code)
-
-target_link_libraries(code PUBLIC OpenGL)
-
-TARGET_LINK_LIBRARIES(code PUBLIC openal)
-TARGET_LINK_LIBRARIES(code PUBLIC ${LUA_LIBS})
-TARGET_LINK_LIBRARIES(code PUBLIC ${PNG_LIBS})
-TARGET_LINK_LIBRARIES(code PUBLIC ${JPEG_LIBS})
-
-TARGET_LINK_LIBRARIES(code PUBLIC sdl2)
-
-TARGET_LINK_LIBRARIES(code PUBLIC ffmpeg)
-
-TARGET_LINK_LIBRARIES(code PUBLIC utfcpp)
-
-TARGET_LINK_LIBRARIES(code PUBLIC platform)
-TARGET_LINK_LIBRARIES(code PUBLIC compiler)
-
-target_link_libraries(code PUBLIC md5)
-
-target_link_libraries(code PUBLIC discord-rpc)
-
-target_link_libraries(code PUBLIC libRocket)
-
-enable_clang_tidy(code)
-
-IF (FSO_USE_SPEECH)
-	find_package(Speech REQUIRED)
-	target_link_libraries(code PUBLIC speech)
-ENDIF(FSO_USE_SPEECH)
-
-TARGET_LINK_LIBRARIES(code PUBLIC jansson)
-
-# Headers for standalone "gui" on UNIX
-IF(UNIX)
-	TARGET_LINK_LIBRARIES(code PUBLIC ${MONGOOSE_LIBS})
-ENDIF(UNIX)
-
-IF(FSO_BUILD_TOOLS)
-	ADD_SUBDIRECTORY(cfilearchiver)
-
-	ADD_SUBDIRECTORY(cfileextractor)
-ENDIF(FSO_BUILD_TOOLS)
-
-if (ENABLE_COTIRE)
-	set_target_properties(code PROPERTIES COTIRE_CXX_PREFIX_HEADER_INIT "${CMAKE_CURRENT_SOURCE_DIR}/prefix_header.h")
-else()
-	if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-		target_compile_options(code PRIVATE "$<$<COMPILE_LANGUAGE:CXX>:-include${CMAKE_CURRENT_SOURCE_DIR}/prefix_header.h>")
-	elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "MSVC")
-		target_compile_options(code PRIVATE "$<$<COMPILE_LANGUAGE:CXX>:/FI ${CMAKE_CURRENT_SOURCE_DIR}/prefix_header.h>")
-	elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
-		target_compile_options(code PRIVATE "$<$<COMPILE_LANGUAGE:CXX>:-include${CMAKE_CURRENT_SOURCE_DIR}/prefix_header.h>")
-	elseif("${CMAKE_CXX_COMPILER_ID}" STREQUAL "AppleClang")
-		target_compile_options(code PRIVATE "$<$<COMPILE_LANGUAGE:CXX>:-include${CMAKE_CURRENT_SOURCE_DIR}/prefix_header.h>")
-	ELSE()
-		MESSAGE("Unknown compiler for global includes. This will probably break the build.")
-	ENDIF()
-endif()
-
-include(util)
-configure_cotire(code)
-
-# Ensure that Xcode generates debug symbols on macOS for Debug builds
-set_target_properties(code PROPERTIES XCODE_ATTRIBUTE_GCC_GENERATE_DEBUGGING_SYMBOLS[variant=Debug] "YES")
-set_target_properties(code PROPERTIES XCODE_ATTRIBUTE_COPY_PHASE_STRIP[variant=Debug] "NO")
-set_target_properties(code PROPERTIES XCODE_ATTRIBUTE_STRIP_INSTALLED_PRODUCT[variant=Debug] "NO")
-set_target_properties(code PROPERTIES XCODE_ATTRIBUTE_GCC_SYMBOLS_PRIVATE_EXTERN[variant=Debug] "NO")
@@ -0,0 +1,855 @@
+## code/Makefile.am for fs2_open
+##
+## $Id: Makefile.am,v 1.31.2.10 2007-11-22 04:52:12 taylor Exp $
+
+
+EXTRA_DIST =	\
+	freespace2/app_icon.ico	\
+	freespace2/freespace.rc	\
+	freespace2/freespaceresource.h	\
+	freespace2/goal_com.bmp	\
+	freespace2/goal_fail.bmp	\
+	freespace2/goal_inc.bmp	\
+	freespace2/goal_none.bmp	\
+	freespace2/goal_ord.bmp	\
+	fred2/addvariabledlg.cpp	\
+	fred2/addvariabledlg.h	\
+	fred2/adjustgriddlg.cpp	\
+	fred2/adjustgriddlg.h	\
+	fred2/asteroideditordlg.cpp	\
+	fred2/asteroideditordlg.h	\
+	fred2/bgbitmapdlg.cpp	\
+	fred2/bgbitmapdlg.h	\
+	fred2/briefingeditordlg.cpp	\
+	fred2/briefingeditordlg.h	\
+	fred2/campaigneditordlg.cpp	\
+	fred2/campaigneditordlg.h	\
+	fred2/campaignfilelistbox.cpp	\
+	fred2/campaignfilelistbox.h	\
+	fred2/campaigntreeview.cpp	\
+	fred2/campaigntreeview.h	\
+	fred2/campaigntreewnd.cpp	\
+	fred2/campaigntreewnd.h	\
+	fred2/cmdbrief.cpp	\
+	fred2/cmdbrief.h	\
+	fred2/createwingdlg.cpp	\
+	fred2/createwingdlg.h	\
+	fred2/customwingnames.cpp	\
+	fred2/customwingnames.h	\
+	fred2/debriefingeditordlg.cpp	\
+	fred2/debriefingeditordlg.h	\
+	fred2/dialog1.cpp	\
+	fred2/dialog1.h	\
+	fred2/dumpstats.cpp	\
+	fred2/dumpstats.h	\
+	fred2/editor.h	\
+	fred2/eventeditor.cpp	\
+	fred2/eventeditor.h	\
+	fred2/folderdlg.cpp	\
+	fred2/folderdlg.h	\
+	fred2/fred.cpp	\
+	fred2/fred.h	\
+	fred2/fred.rc	\
+	fred2/freddoc.cpp	\
+	fred2/freddoc.h	\
+	fred2/fredrender.cpp	\
+	fred2/fredrender.h	\
+	fred2/fredstubs.cpp	\
+	fred2/fredview.cpp	\
+	fred2/fredview.h	\
+	fred2/grid.cpp	\
+	fred2/grid.h	\
+	fred2/ignoreordersdlg.cpp	\
+	fred2/ignoreordersdlg.h	\
+	fred2/initialships.cpp	\
+	fred2/initialships.h	\
+	fred2/initialstatus.cpp	\
+	fred2/initialstatus.h	\
+	fred2/mainfrm.cpp	\
+	fred2/mainfrm.h	\
+	fred2/makehelp.bat	\
+	fred2/management.cpp	\
+	fred2/management.h	\
+	fred2/messageeditordlg.cpp	\
+	fred2/messageeditordlg.h	\
+	fred2/missiongoalsdlg.cpp	\
+	fred2/missiongoalsdlg.h	\
+	fred2/missionnotesdlg.cpp	\
+	fred2/missionnotesdlg.h	\
+	fred2/missionsave.cpp	\
+	fred2/missionsave.h	\
+	fred2/modifyvariabledlg.cpp	\
+	fred2/modifyvariabledlg.h	\
+	fred2/operatorargtypeselect.cpp	\
+	fred2/operatorargtypeselect.h	\
+	fred2/orienteditor.cpp	\
+	fred2/orienteditor.h	\
+	fred2/playerstarteditor.cpp	\
+	fred2/playerstarteditor.h	\
+	fred2/prefsdlg.cpp	\
+	fred2/prefsdlg.h	\
+	fred2/reinforcementeditordlg.cpp	\
+	fred2/reinforcementeditordlg.h	\
+	fred2/resource.h	\
+	fred2/resource.hm	\
+	fred2/setglobalshipflags.cpp	\
+	fred2/setglobalshipflags.h	\
+	fred2/sexp_tree.cpp	\
+	fred2/sexp_tree.h	\
+	fred2/shieldsysdlg.cpp	\
+	fred2/shieldsysdlg.h	\
+	fred2/ship_select.cpp	\
+	fred2/ship_select.h	\
+	fred2/shipchecklistbox.cpp	\
+	fred2/shipchecklistbox.h	\
+	fred2/shipclasseditordlg.cpp	\
+	fred2/shipclasseditordlg.h	\
+	fred2/shipeditordlg.cpp	\
+	fred2/shipeditordlg.h	\
+	fred2/shipflagsdlg.cpp	\
+	fred2/shipflagsdlg.h	\
+	fred2/shipgoalsdlg.cpp	\
+	fred2/shipgoalsdlg.h	\
+	fred2/shipspecialdamage.cpp	\
+	fred2/shipspecialdamage.h	\
+	fred2/shipspecialhitpoints.cpp	\
+	fred2/shipspecialhitpoints.h	\
+	fred2/shiptexturesdlg.cpp	\
+	fred2/shiptexturesdlg.h	\
+	fred2/starfieldeditor.cpp	\
+	fred2/starfieldeditor.h	\
+	fred2/stdafx.cpp	\
+	fred2/stdafx.h	\
+	fred2/textviewdlg.cpp	\
+	fred2/textviewdlg.h	\
+	fred2/voiceactingmanager.cpp	\
+	fred2/voiceactingmanager.h	\
+	fred2/waypointpathdlg.cpp	\
+	fred2/waypointpathdlg.h	\
+	fred2/weaponeditordlg.cpp	\
+	fred2/weaponeditordlg.h	\
+	fred2/wing.cpp	\
+	fred2/wing.h	\
+	fred2/wing_editor.cpp	\
+	fred2/wing_editor.h	\
+	fred2/hlp/afxcore.rtf	\
+	fred2/hlp/afxhelp.hm	\
+	fred2/hlp/afxprint.rtf	\
+	fred2/hlp/appexit.bmp	\
+	fred2/hlp/bullet.bmp	\
+	fred2/hlp/curarw2.bmp	\
+	fred2/hlp/curarw4.bmp	\
+	fred2/hlp/curhelp.bmp	\
+	fred2/hlp/editcopy.bmp	\
+	fred2/hlp/editcut.bmp	\
+	fred2/hlp/editpast.bmp	\
+	fred2/hlp/editundo.bmp	\
+	fred2/hlp/filenew.bmp	\
+	fred2/hlp/fileopen.bmp	\
+	fred2/hlp/fileprnt.bmp	\
+	fred2/hlp/filesave.bmp	\
+	fred2/hlp/fred.hm	\
+	fred2/hlp/fred.hpj	\
+	fred2/hlp/help.log	\
+	fred2/hlp/hlpsbar.bmp	\
+	fred2/hlp/hlptbar.bmp	\
+	fred2/hlp/recfirst.bmp	\
+	fred2/hlp/reclast.bmp	\
+	fred2/hlp/recnext.bmp	\
+	fred2/hlp/recprev.bmp	\
+	fred2/hlp/scmax.bmp	\
+	fred2/hlp/scmenu.bmp	\
+	fred2/hlp/scmin.bmp	\
+	fred2/res/bitmap1.bmp	\
+	fred2/res/black_do.bmp	\
+	fred2/res/bmp00001.bmp	\
+	fred2/res/chained.bmp	\
+	fred2/res/chained_directive.bmp	\
+	fred2/res/cursor1.cur	\
+	fred2/res/cursor2.cur	\
+	fred2/res/data.bmp	\
+	fred2/res/fred.ico	\
+	fred2/res/fred.rc2	\
+	fred2/res/freddoc.ico	\
+	fred2/res/green_do.bmp	\
+	fred2/res/root.bmp	\
+	fred2/res/root_directive.bmp	\
+	fred2/res/toolbar.bmp	\
+	fred2/res/toolbar1.bmp	\
+	fred2/res/variable.bmp	\
+	sound/phrases.xml	\
+	sound/gc.exe	\
+	wxfred2/res/fred.ico	\
+	wxfred2/wxfred.xrc
+
+
+# D_ variants are defaults and should always be used
+# FS2_ variants are for game building and wxFRED
+AM_CXXFLAGS = @D_CFLAGS@ @FS2_CXXFLAGS@
+AM_LDFLAGS = @D_LDFLAGS@ @FS2_LDFLAGS@
+
+noinst_LIBRARIES = libcode.a
+noinst_PROGRAMS = @FS2_BINARY@
+
+EXTRA_PROGRAMS = fs2_open_r fs2_open_d wxFRED2_r wxFRED2_d fs2_open_INF_r fs2_open_INF_d wxFRED2_INF_r wxFRED2_INF_d
+
+###############################################################################
+##
+## Begin CORE library
+##
+
+FS2_SOURCES =	\
+	ai/ai.cpp	\
+	ai/ai.h	\
+	ai/aibig.cpp	\
+	ai/aibig.h	\
+	ai/aicode.cpp	\
+	ai/aigoals.cpp	\
+	ai/aigoals.h	\
+	ai/aiinternal.h	\
+	ai/ailocal.h	\
+	ai/aiturret.cpp	\
+	ai/ai_profiles.cpp	\
+	ai/ai_profiles.h	\
+	anim/animplay.cpp	\
+	anim/animplay.h	\
+	anim/packunpack.cpp	\
+	anim/packunpack.h	\
+	asteroid/asteroid.cpp	\
+	asteroid/asteroid.h	\
+	autopilot/autopilot.cpp	\
+	autopilot/autopilot.h	\
+	bmpman/bm_internal.h	\
+	bmpman/bmpman.cpp	\
+	bmpman/bmpman.h	\
+	camera/camera.cpp	\
+	camera/camera.h	\
+	cfile/cfile.cpp	\
+	cfile/cfile.h	\
+	cfile/cfilearchive.cpp	\
+	cfile/cfilearchive.h	\
+	cfile/cfilelist.cpp	\
+	cfile/cfilesystem.cpp	\
+	cfile/cfilesystem.h	\
+	cmdline/cmdline.cpp	\
+	cmdline/cmdline.h	\
+	cmeasure/cmeasure.cpp	\
+	cmeasure/cmeasure.h	\
+	controlconfig/controlsconfig.cpp	\
+	controlconfig/controlsconfig.h	\
+	controlconfig/controlsconfigcommon.cpp	\
+	cutscene/cutscenes.cpp	\
+	cutscene/cutscenes.h	\
+	cutscene/decoder16.cpp	\
+	cutscene/decoder8.cpp	\
+	cutscene/movie.cpp	\
+	cutscene/movie.h	\
+	cutscene/mve_audio.cpp	\
+	cutscene/mvelib.cpp	\
+	cutscene/mvelib.h	\
+	cutscene/mveplayer.cpp	\
+	cutscene/oggplayer.cpp	\
+	cutscene/oggplayer.h	\
+	ddsutils/ddsutils.cpp	\
+	ddsutils/ddsutils.h	\
+	debris/debris.cpp	\
+	debris/debris.h	\
+	debugconsole/console.cpp	\
+	debugconsole/dbugfile.h	\
+	debugconsole/timerbar.cpp	\
+	debugconsole/timerbar.h	\
+	decals/decals.cpp	\
+	decals/decals.h	\
+	demo/demo.cpp	\
+	demo/demo.h	\
+	exceptionhandler/exceptionhandler.cpp	\
+	exceptionhandler/exceptionhandler.h	\
+	external_dll/externalcode.h		\
+	external_dll/trackirglobal.cpp	\
+	external_dll/trackirglobal.h	\
+	fireball/fireballs.cpp	\
+	fireball/fireballs.h	\
+	fireball/warpineffect.cpp	\
+	fs2netd/fs2netd_client.cpp	\
+	fs2netd/fs2netd_client.h	\
+	fs2netd/tcp_client.cpp	\
+	fs2netd/tcp_client.h	\
+	fs2netd/tcp_socket.cpp	\
+	fs2netd/tcp_socket.h	\
+	fs2netd/protocol.h	\
+	gamehelp/contexthelp.cpp	\
+	gamehelp/contexthelp.h	\
+	gamehelp/gameplayhelp.cpp	\
+	gamehelp/gameplayhelp.h	\
+	gamesequence/gamesequence.cpp	\
+	gamesequence/gamesequence.h	\
+	gamesnd/eventmusic.cpp	\
+	gamesnd/eventmusic.h	\
+	gamesnd/gamesnd.cpp	\
+	gamesnd/gamesnd.h	\
+	globalincs/alphacolors.cpp	\
+	globalincs/alphacolors.h	\
+	globalincs/crypt.cpp	\
+	globalincs/crypt.h	\
+	globalincs/def_files.cpp	\
+	globalincs/def_files.h	\
+	globalincs/globals.h	\
+	globalincs/linklist.h	\
+	globalincs/pstypes.h	\
+	globalincs/safe_strings.cpp	\
+	globalincs/safe_strings.h	\
+	globalincs/safe_strings_test.cpp	\
+	globalincs/systemvars.cpp	\
+	globalincs/systemvars.h	\
+	globalincs/version.cpp	\
+	globalincs/version.h	\
+	graphics/2d.cpp	\
+	graphics/2d.h	\
+	graphics/font.cpp	\
+	graphics/font.h	\
+	graphics/generic.cpp	\
+	graphics/generic.h	\
+	graphics/grbatch.cpp	\
+	graphics/grbatch.h	\
+	graphics/grinternal.h	\
+	graphics/gropengl.cpp	\
+	graphics/gropengl.h	\
+	graphics/gropenglbmpman.cpp	\
+	graphics/gropenglbmpman.h	\
+	graphics/gropengldraw.cpp	\
+	graphics/gropengldraw.h	\
+	graphics/gropenglextension.cpp	\
+	graphics/gropenglextension.h	\
+	graphics/gropengllight.cpp	\
+	graphics/gropengllight.h	\
+	graphics/gropenglpostprocessing.cpp	\
+	graphics/gropenglpostprocessing.h	\
+	graphics/gropenglshader.cpp	\
+	graphics/gropenglshader.h	\
+	graphics/gropenglstate.cpp	\
+	graphics/gropenglstate.h	\
+	graphics/gropengltexture.cpp	\
+	graphics/gropengltexture.h	\
+	graphics/gropengltnl.cpp	\
+	graphics/gropengltnl.h	\
+	graphics/grstub.cpp	\
+	graphics/grstub.h	\
+	graphics/line.h	\
+	graphics/tmapper.h	\
+	hud/hud.cpp	\
+	hud/hud.h	\
+	hud/hudartillery.cpp	\
+	hud/hudartillery.h	\
+	hud/hudbrackets.cpp	\
+	hud/hudbrackets.h	\
+	hud/hudconfig.cpp	\
+	hud/hudconfig.h	\
+	hud/hudescort.cpp	\
+	hud/hudescort.h	\
+	hud/hudets.cpp	\
+	hud/hudets.h	\
+	hud/hudgauges.h	\
+	hud/hudlock.cpp	\
+	hud/hudlock.h	\
+	hud/hudmessage.cpp	\
+	hud/hudmessage.h	\
+	hud/hudnavigation.cpp	\
+	hud/hudnavigation.h	\
+	hud/hudobserver.cpp	\
+	hud/hudobserver.h	\
+	hud/hudparse.cpp	\
+	hud/hudparse.h	\
+	hud/hudresource.h	\
+	hud/hudreticle.cpp	\
+	hud/hudreticle.h	\
+	hud/hudshield.cpp	\
+	hud/hudshield.h	\
+	hud/hudsquadmsg.cpp	\
+	hud/hudsquadmsg.h	\
+	hud/hudtarget.cpp	\
+	hud/hudtarget.h	\
+	hud/hudtargetbox.cpp	\
+	hud/hudtargetbox.h	\
+	hud/hudwingmanstatus.cpp	\
+	hud/hudwingmanstatus.h	\
+	iff_defs/iff_defs.cpp	\
+	iff_defs/iff_defs.h	\
+	inetfile/cftp.cpp	\
+	inetfile/cftp.h	\
+	inetfile/chttpget.cpp	\
+	inetfile/chttpget.h	\
+	inetfile/inetgetfile.cpp	\
+	inetfile/inetgetfile.h	\
+	io/key.cpp	\
+	io/key.h	\
+	io/keycontrol.cpp	\
+	io/keycontrol.h	\
+	io/mouse.cpp	\
+	io/mouse.h	\
+	io/timer.cpp	\
+	io/timer.h	\
+	jpgutils/jpgutils.cpp	\
+	jpgutils/jpgutils.h	\
+	jumpnode/jumpnode.cpp	\
+	jumpnode/jumpnode.h	\
+	lab/lab.cpp	\
+	lab/lab.h	\
+	lab/wmcgui.cpp	\
+	lab/wmcgui.h	\
+	lighting/lighting.cpp	\
+	lighting/lighting.h	\
+	localization/fhash.cpp	\
+	localization/fhash.h	\
+	localization/localize.cpp	\
+	localization/localize.h	\
+	math/fix.cpp	\
+	math/fix.h	\
+	math/floating.cpp	\
+	math/floating.h	\
+	math/fvi.cpp	\
+	math/fvi.h	\
+	math/spline.cpp	\
+	math/spline.h	\
+	math/staticrand.cpp	\
+	math/staticrand.h	\
+	math/vecmat.cpp	\
+	math/vecmat.h	\
+	menuui/barracks.cpp	\
+	menuui/barracks.h	\
+	menuui/credits.cpp	\
+	menuui/credits.h	\
+	menuui/fishtank.cpp	\
+	menuui/fishtank.h	\
+	menuui/mainhallmenu.cpp	\
+	menuui/mainhallmenu.h	\
+	menuui/mainhalltemp.cpp	\
+	menuui/mainhalltemp.h	\
+	menuui/optionsmenu.cpp	\
+	menuui/optionsmenu.h	\
+	menuui/optionsmenumulti.cpp	\
+	menuui/optionsmenumulti.h	\
+	menuui/playermenu.cpp	\
+	menuui/playermenu.h	\
+	menuui/readyroom.cpp	\
+	menuui/readyroom.h	\
+	menuui/snazzyui.cpp	\
+	menuui/snazzyui.h	\
+	menuui/techmenu.cpp	\
+	menuui/techmenu.h	\
+	menuui/trainingmenu.cpp	\
+	menuui/trainingmenu.h	\
+	mission/missionbriefcommon.cpp	\
+	mission/missionbriefcommon.h	\
+	mission/missioncampaign.cpp	\
+	mission/missioncampaign.h	\
+	mission/missiongoals.cpp	\
+	mission/missiongoals.h	\
+	mission/missiongrid.cpp	\
+	mission/missiongrid.h	\
+	mission/missionhotkey.cpp	\
+	mission/missionhotkey.h	\
+	mission/missionload.cpp	\
+	mission/missionload.h	\
+	mission/missionlog.cpp	\
+	mission/missionlog.h	\
+	mission/missionmessage.cpp	\
+	mission/missionmessage.h	\
+	mission/missionparse.cpp	\
+	mission/missionparse.h	\
+	mission/missiontraining.cpp	\
+	mission/missiontraining.h	\
+	missionui/chatbox.cpp	\
+	missionui/chatbox.h	\
+	missionui/fictionviewer.cpp	\
+	missionui/fictionviewer.h	\
+	missionui/missionbrief.cpp	\
+	missionui/missionbrief.h	\
+	missionui/missioncmdbrief.cpp	\
+	missionui/missioncmdbrief.h	\
+	missionui/missiondebrief.cpp	\
+	missionui/missiondebrief.h	\
+	missionui/missionloopbrief.cpp	\
+	missionui/missionloopbrief.h	\
+	missionui/missionpause.cpp	\
+	missionui/missionpause.h	\
+	missionui/missionrecommend.cpp	\
+	missionui/missionrecommend.h	\
+	missionui/missionscreencommon.cpp	\
+	missionui/missionscreencommon.h	\
+	missionui/missionshipchoice.cpp	\
+	missionui/missionshipchoice.h	\
+	missionui/missionstats.cpp	\
+	missionui/missionstats.h	\
+	missionui/missionweaponchoice.cpp	\
+	missionui/missionweaponchoice.h	\
+	missionui/redalert.cpp	\
+	missionui/redalert.h	\
+	model/model.h	\
+	model/modelanim.cpp	\
+	model/modelanim.h	\
+	model/modelcollide.cpp	\
+	model/modelinterp.cpp	\
+	model/modelsinc.h	\
+	model/modeloctant.cpp	\
+	model/modelread.cpp	\
+	nebula/neb.cpp	\
+	nebula/neb.h	\
+	nebula/neblightning.cpp	\
+	nebula/neblightning.h	\
+	network/chat_api.cpp	\
+	network/chat_api.h	\
+	network/multi.cpp	\
+	network/multi.h	\
+	network/multilag.cpp	\
+	network/multilag.h	\
+	network/multimsgs.cpp	\
+	network/multimsgs.h	\
+	network/multiteamselect.cpp	\
+	network/multiteamselect.h	\
+	network/multiui.cpp	\
+	network/multiui.h	\
+	network/multiutil.cpp	\
+	network/multiutil.h	\
+	network/multi_campaign.cpp	\
+	network/multi_campaign.h	\
+	network/multi_data.cpp	\
+	network/multi_data.h	\
+	network/multi_dogfight.cpp	\
+	network/multi_dogfight.h	\
+	network/multi_endgame.cpp	\
+	network/multi_endgame.h	\
+	network/multi_ingame.cpp	\
+	network/multi_ingame.h	\
+	network/multi_kick.cpp	\
+	network/multi_kick.h	\
+	network/multi_log.cpp	\
+	network/multi_log.h	\
+	network/multi_obj.cpp	\
+	network/multi_obj.h	\
+	network/multi_observer.cpp	\
+	network/multi_observer.h	\
+	network/multi_oo.h	\
+	network/multi_options.cpp	\
+	network/multi_options.h	\
+	network/multi_pause.cpp	\
+	network/multi_pause.h	\
+	network/multi_pinfo.cpp	\
+	network/multi_pinfo.h	\
+	network/multi_ping.cpp	\
+	network/multi_ping.h	\
+	network/multi_pmsg.cpp	\
+	network/multi_pmsg.h	\
+	network/multi_pxo.cpp	\
+	network/multi_pxo.h	\
+	network/multi_rate.cpp	\
+	network/multi_rate.h	\
+	network/multi_respawn.cpp	\
+	network/multi_respawn.h	\
+	network/multi_sexp.cpp	\
+	network/multi_sexp.h	\
+	network/multi_team.cpp	\
+	network/multi_team.h	\
+	network/multi_update.h	\
+	network/multi_voice.cpp	\
+	network/multi_voice.h	\
+	network/multi_xfer.cpp	\
+	network/multi_xfer.h	\
+	network/psnet.cpp	\
+	network/psnet.h	\
+	network/psnet2.cpp	\
+	network/psnet2.h	\
+	network/stand_gui.cpp	\
+	network/stand_gui-unix.cpp	\
+	network/stand_gui.h	\
+	object/collidedebrisship.cpp	\
+	object/collidedebrisweapon.cpp	\
+	object/collideshipship.cpp	\
+	object/collideshipweapon.cpp	\
+	object/collideweaponweapon.cpp	\
+	object/deadobjectdock.cpp	\
+	object/deadobjectdock.h	\
+	object/objcollide.cpp	\
+	object/objcollide.h	\
+	object/objectdock.cpp	\
+	object/objectdock.h	\
+	object/object.cpp	\
+	object/object.h	\
+	object/objectshield.cpp	\
+	object/objectshield.h	\
+	object/objectsnd.cpp	\
+	object/objectsnd.h	\
+	object/objectsort.cpp	\
+	object/parseobjectdock.cpp	\
+	object/parseobjectdock.h	\
+	object/waypoint.cpp	\
+	object/waypoint.h	\
+	observer/observer.cpp	\
+	observer/observer.h	\
+	palman/palman.cpp	\
+	palman/palman.h	\
+	parse/encrypt.cpp	\
+	parse/encrypt.h	\
+	parse/lua.cpp	\
+	parse/lua.h	\
+	parse/parselo.cpp	\
+	parse/parselo.h	\
+	parse/scripting.cpp	\
+	parse/scripting.h	\
+	parse/sexp.cpp	\
+	parse/sexp.h	\
+	particle/particle.cpp	\
+	particle/particle.h	\
+	pcxutils/pcxutils.cpp	\
+	pcxutils/pcxutils.h	\
+	pngutils/pngutils.cpp	\
+	pngutils/pngutils.h	\
+	physics/physics.cpp	\
+	physics/physics.h	\
+	playerman/managepilot.cpp	\
+	playerman/managepilot.h	\
+	playerman/player.h	\
+	playerman/playercontrol.cpp	\
+	popup/popup.cpp	\
+	popup/popup.h	\
+	popup/popupdead.cpp	\
+	popup/popupdead.h	\
+	radar/radar.cpp	\
+	radar/radar.h	\
+	radar/radarorb.cpp	\
+	radar/radarorb.h	\
+	radar/radarsetup.cpp	\
+	radar/radarsetup.h	\
+	render/3d.h	\
+	render/3dclipper.cpp	\
+	render/3ddraw.cpp	\
+	render/3dinternal.h	\
+	render/3dlaser.cpp	\
+	render/3dmath.cpp	\
+	render/3dsetup.cpp	\
+	ship/afterburner.cpp	\
+	ship/afterburner.h	\
+	ship/awacs.cpp	\
+	ship/awacs.h	\
+	ship/shield.cpp	\
+	ship/ship.cpp	\
+	ship/ship.h	\
+	ship/shipcontrails.cpp	\
+	ship/shipcontrails.h	\
+	ship/shipfx.cpp	\
+	ship/shipfx.h	\
+	ship/shiphit.cpp	\
+	ship/shiphit.h	\
+	ship/subsysdamage.h	\
+	sound/audiostr.cpp	\
+	sound/audiostr.h	\
+	sound/acm.cpp	\
+	sound/acm.h	\
+	sound/ds.cpp	\
+	sound/ds.h	\
+	sound/ds3d.cpp	\
+	sound/ds3d.h	\
+	sound/dscap.cpp	\
+	sound/dscap.h	\
+	sound/fsspeech.cpp	\
+	sound/fsspeech.h	\
+	sound/openal.cpp	\
+	sound/openal.h	\
+	sound/rtvoice.cpp	\
+	sound/rtvoice.h	\
+	sound/sound.cpp	\
+	sound/sound.h	\
+	sound/speech.cpp	\
+	sound/speech.h	\
+	sound/voicerec.cpp	\
+	sound/voicerec.h	\
+	sound/ogg/ogg.cpp	\
+	sound/ogg/ogg.h	\
+	species_defs/species_defs.cpp	\
+	species_defs/species_defs.h	\
+	starfield/nebula.cpp	\
+	starfield/nebula.h	\
+	starfield/starfield.cpp	\
+	starfield/starfield.h	\
+	starfield/supernova.cpp	\
+	starfield/supernova.h	\
+	stats/medals.cpp	\
+	stats/medals.h	\
+	stats/scoring.cpp	\
+	stats/scoring.h	\
+	stats/stats.cpp	\
+	stats/stats.h	\
+	tgautils/tgautils.cpp	\
+	tgautils/tgautils.h	\
+	ui/button.cpp	\
+	ui/checkbox.cpp	\
+	ui/gadget.cpp	\
+	ui/icon.cpp	\
+	ui/inputbox.cpp	\
+	ui/keytrap.cpp	\
+	ui/listbox.cpp	\
+	ui/radio.cpp	\
+	ui/scroll.cpp	\
+	ui/slider.cpp	\
+	ui/slider2.cpp	\
+	ui/ui.h	\
+	ui/uidefs.h	\
+	ui/uidraw.cpp	\
+	ui/uimouse.cpp	\
+	ui/window.cpp	\
+	weapon/beam.cpp	\
+	weapon/beam.h	\
+	weapon/corkscrew.cpp	\
+	weapon/corkscrew.h	\
+	weapon/emp.cpp	\
+	weapon/emp.h	\
+	weapon/flak.cpp	\
+	weapon/flak.h	\
+	weapon/muzzleflash.cpp	\
+	weapon/muzzleflash.h	\
+	weapon/shockwave.cpp	\
+	weapon/shockwave.h	\
+	weapon/swarm.cpp	\
+	weapon/swarm.h	\
+	weapon/trails.cpp	\
+	weapon/trails.h	\
+	weapon/weapons.cpp	\
+	weapon/weapon.h
+
+## conditional includes follow:
+
+## joystic support sources
+if FS2_OS_WIN32
+JOY_SOURCES =	\
+	io/joy.cpp	\
+	io/joy.h	\
+	io/joy_ff.cpp	\
+	io/joy_ff.h	\
+	io/sw_error.hpp	\
+	io/sw_force.h	\
+	io/sw_guid.hpp	\
+	io/swff_lib.cpp
+endif
+
+if FS2_OS_UNIX
+JOY_SOURCES =	\
+	io/joy.h	\
+	io/joy_ff.h	\
+	io/joy-unix.cpp
+endif
+
+## Win32-specific sources
+if FS2_OS_WIN32
+WIN32_SOURCES =	\
+	directx/vasync.h	\
+	directx/vd3dtypes.h	\
+	directx/vddraw.h	\
+	directx/vdinput.h	\
+	directx/vdplay.h	\
+	directx/vdplobby.h	\
+	directx/vdsetup.h	\
+	directx/vdvp.h	\
+	globalincs/windebug.cpp	\
+	graphics/gl/GLAUX.H	\
+	graphics/gl/GLU.H	\
+	graphics/gl/Gl.h	\
+	graphics/gl/Glext.h	\
+	graphics/gl/wglext.h	\
+	osapi/monopub.h	\
+	osapi/osapi.cpp	\
+	osapi/osapi.h	\
+	osapi/osregistry.cpp	\
+	osapi/osregistry.h	\
+	osapi/outwnd.cpp	\
+	osapi/outwnd.h
+endif
+
+## Unix-specific sources
+if FS2_OS_UNIX
+UNIX_SOURCES =	\
+	osapi/osapi_unix.cpp	\
+	osapi/osapi.h	\
+	osapi/osregistry_unix.cpp	\
+	osapi/osregistry.h	\
+	osapi/outwnd_unix.cpp	\
+	osapi/outwnd.h	\
+	windows_stub/stubs.cpp	\
+	windows_stub/config.h
+endif
+
+
+## libcode.a
+libcode_a_SOURCES = ${FS2_SOURCES} ${JOY_SOURCES} ${WIN32_SOURCES}	\
+	${UNIX_SOURCES}
+
+##
+## End CODE library
+##
+###############################################################################
+
+###############################################################################
+##
+## Begin MAIN fs2 binary
+##
+
+FS2OPEN_SOURCES = \
+	freespace2/freespace.cpp	\
+	freespace2/freespace.h	\
+	freespace2/levelpaging.cpp	\
+	freespace2/levelpaging.h
+
+fs2_open_d_SOURCES =	\
+	${FS2OPEN_SOURCES}
+
+fs2_open_r_SOURCES =	\
+	${FS2OPEN_SOURCES}
+
+fs2_open_INF_d_SOURCES =	\
+	${FS2OPEN_SOURCES}
+
+fs2_open_INF_r_SOURCES =	\
+	${FS2OPEN_SOURCES}
+
+fs2_open_d_LDADD = libcode.a
+fs2_open_r_LDADD = libcode.a
+fs2_open_INF_d_LDADD = libcode.a
+fs2_open_INF_r_LDADD = libcode.a
+
+##
+## End MAIN binary
+##
+###############################################################################
+
+###############################################################################
+##
+## Begin wxFRED2 binary
+##
+
+wxFRED_SOURCES = \
+	wxfred2/wxfred2.cpp	\
+	wxfred2/wxfred2.h	\
+	wxfred2/fredframe.cpp	\
+	wxfred2/fredframe.h	\
+	wxfred2/wxfred_xrc.cpp	\
+	wxfred2/wxfred_xrc.h
+
+wxFRED2_d_SOURCES = \
+	${wxFRED_SOURCES}
+
+wxFRED2_r_SOURCES =	\
+	${wxFRED_SOURCES}
+
+wxFRED2_INF_d_SOURCES = \
+	${wxFRED_SOURCES}
+
+wxFRED2_INF_r_SOURCES =	\
+	${wxFRED_SOURCES}
+
+wxFRED2_d_LDADD = libcode.a
+wxFRED2_r_LDADD = libcode.a
+wxFRED2_INF_d_LDADD = libcode.a
+wxFRED2_INF_r_LDADD = libcode.a
+
+##
+## End wxFRED2 binary
+##
+###############################################################################
@@ -7,26 +7,23 @@
 *
 */

-/**
- * @file 
- * The code in here is just for bookeeping, allocating AI slots and linking them to ships.
- * See AiCode.cpp for the actual AI code.
- */
+// The code in here is just for bookeeping, allocating
+// ai slots and linking them to ships.
+// See AiCode.cpp for the actual AI code.

 #include "ai/ai.h"
 #include "object/object.h"
 #include "ship/ship.h"


-int Total_goal_target_names = 0;
-char Goal_target_names[MAX_GOAL_TARGET_NAMES][NAME_LENGTH];
+
+int Total_goal_ship_names = 0;
+char Goal_ship_names[MAX_GOAL_SHIP_NAMES][NAME_LENGTH];
 ai_info Ai_info[MAX_AI_INFO];
 ai_info *Player_ai;

-/**
- * @brief Returns index of free AI slot.
- * @return Return -1 if no free slot.
- */
+// Return index of free AI slot.
+// Return -1 if no free slot.
 int ai_get_slot(int shipnum)
 {
 	int	i;
@@ -43,10 +40,8 @@ int ai_get_slot(int shipnum)
 	return -1;
 }

-/**
- * @brief Frees a currently used AI slot.
- * @details Only modifies in ::Ai_info struct. Does not modify hook in ship.
- */
+// Releases an AI slot to be used by someone else.
+// Only modifies in Ai_info struct.  Does not modify hook in ship.
 void ai_free_slot(int ai_index)
 {
 	Assert( (ai_index >= 0) && (ai_index < MAX_AI_INFO) );
@@ -82,22 +77,20 @@ void set_wingnum(int objnum, int wingnum)
 	Ai_info[ai_index].wing = wingnum;
 }

-char *ai_get_goal_target_name(const char *name, int *index)
+char *ai_get_goal_ship_name(char *name, int *index)
 {
-	Assert(name != NULL);
-	Assert(index != NULL);
 	int i;

-	for (i=0; i < Total_goal_target_names; i++)
-		if (!stricmp(name, Goal_target_names[i])) {
+	for (i=0; i < Total_goal_ship_names; i++)
+		if (!stricmp(name, Goal_ship_names[i])) {
 			*index = i;
-			return Goal_target_names[i];
+			return Goal_ship_names[i];
 		}

-	Assert(Total_goal_target_names < MAX_GOAL_TARGET_NAMES);
-	Assertion(strlen(name) <= NAME_LENGTH - 1, "Goal target name %s is too long. Needs to be 31 characters or less.", name);
-	i = Total_goal_target_names++;
-	strcpy_s(Goal_target_names[i], name);
+	Assert(Total_goal_ship_names < MAX_GOAL_SHIP_NAMES);
+	Assertion(strlen(name) < NAME_LENGTH - 1, "Ship name %s is too long. Needs to be 31 characters or less.", name);
+	i = Total_goal_ship_names++;
+	strcpy_s(Goal_ship_names[i], name);
 	*index = i;
-	return Goal_target_names[i];
+	return Goal_ship_names[i];
 }
@@ -12,32 +12,54 @@
 #ifndef _AI_H
 #define _AI_H

-#include "ai/ai_profiles.h"
-#include "globalincs/globals.h"
 #include "globalincs/pstypes.h"
+#include "globalincs/globals.h"
 #include "globalincs/systemvars.h"
-#include "object/waypoint.h"
+#include "ai/ai_profiles.h"
 #include "physics/physics.h"
-#include "ship/ship_flags.h"

-class ship_weapon;
-class ship_subsys;
-class object;
-class ship_info;
+struct ship_weapon;
+struct ship_subsys;
+struct object;
+struct ship_info;

 #define	AI_DEFAULT_CLASS 3  // default AI class for new ships (Fred)

-typedef struct ai_flag_name {
-	AI::AI_Flags flag;
-	char flag_name[TOKEN_LENGTH];
-} ai_flag_name;
+#define	AIF_FORMATION_WING					(1 << 0)	//	Fly in formation as part of wing.
+#define	AIF_AWAITING_REPAIR					(1 << 1)	//	Awaiting a repair ship.
+#define	AIF_BEING_REPAIRED					(1 << 2)	//	Currently docked with repair ship.
+#define	AIF_REPAIRING						(1 << 3)	//	Repairing a ship (or going to repair a ship)
+#define	AIF_SEEK_LOCK						(1 << 4)	//	set if should focus on gaining aspect lock, not hitting with lasers
+#define	AIF_FORMATION_OBJECT				(1 << 5)	//	Fly in formation off a specific object.
+#define	AIF_TEMPORARY_IGNORE				(1 << 6)	//	Means current ignore_objnum is only temporary, not an order from the player.
+#define	AIF_USE_EXIT_PATH					(1 << 7)	// Used by path code, to flag path as an exit path
+#define	AIF_USE_STATIC_PATH					(1 << 8)	// Used by path code, use fixed path, don't try to recreate
+#define	AIF_TARGET_COLLISION				(1 << 9)	//	Collided with aip->target_objnum last frame.  Avoid that ship for half a second or so.
+#define	AIF_UNLOAD_SECONDARIES				(1 << 10)	//	Fire secondaries as fast as possible!
+#define	AIF_ON_SUBSYS_PATH					(1 << 11)	// Current path leads to a subsystem
+#define	AIF_AVOID_SHOCKWAVE_SHIP			(1 << 12)	//	Avoid an existing shockwave from a ship.
+#define	AIF_AVOID_SHOCKWAVE_WEAPON			(1 << 13)	//	Avoid an expected shockwave from a weapon.  shockwave_object field contains object index.
+#define	AIF_AVOID_SHOCKWAVE_STARTED			(1 << 14)	//	Already started avoiding shockwave, don't keep deciding whether to avoid.
+#define	AIF_ATTACK_SLOWLY					(1 << 15)	//	Move slowly while attacking.
+#define	AIF_REPAIR_OBSTRUCTED				(1 << 16)	//	Ship wants to be repaired, but path is obstructed.
+#define	AIF_KAMIKAZE						(1 << 17)	//	Crash into target
+#define	AIF_NO_DYNAMIC						(1 << 18)	//	Not allowed to get dynamic goals
+#define	AIF_AVOIDING_SMALL_SHIP				(1 << 19)	//	Avoiding a player ship.
+#define	AIF_AVOIDING_BIG_SHIP				(1 << 20)	//	Avoiding a large ship.
+#define	AIF_BIG_SHIP_COLLIDE_RECOVER_1		(1 << 21)	//	Collided into a big ship.  Recovering by flying away.
+#define	AIF_BIG_SHIP_COLLIDE_RECOVER_2		(1 << 22)	//	Collided into a big ship.  Fly towards big ship sphere perimeter.
+#define	AIF_STEALTH_PURSUIT					(1 << 23)	// Ai is trying to fight stealth ship

-#define MAX_AI_FLAG_NAMES			2
-extern ai_flag_name Ai_flag_names[];
+// Goober5000
+#define	AIF_UNLOAD_PRIMARIES				(1 << 24)	//	Fire primaries as fast as possible!
+#define AIF_TRYING_UNSUCCESSFULLY_TO_WARP	(1 << 25)	// Trying to warp, but can't warp at the moment
+
+#define	AIF_AVOID_SHOCKWAVE		(AIF_AVOID_SHOCKWAVE_SHIP | AIF_AVOID_SHOCKWAVE_WEAPON)
+#define	AIF_FORMATION			(AIF_FORMATION_WING | AIF_FORMATION_OBJECT)

 //	dock_orient_and_approach() modes.
 #define	DOA_APPROACH	1		//	Approach the current point on the path (aip->path_cur)
-#define	DOA_DOCK		2		//	Dock with goal object.
+#define	DOA_DOCK			2		//	Dock with goal object.
 #define	DOA_UNDOCK_1	3		//	Begin undocking with goal object.  Just move away.
 #define	DOA_UNDOCK_2	4		//	Secondary undocking.  Move away.
 #define	DOA_UNDOCK_3	5		//	Tertiary undocking.  Move away and orient away.
@@ -51,7 +73,7 @@ extern ai_flag_name Ai_flag_names[];
 //	Submodes for seeking safety.
 #define	AISS_1	41				//	Pick a spot to fly to.
 #define	AISS_2	42				//	Flying to spot.
-#define	AISS_3	43				//  Gotten near spot, fly about there.
+#define	AISS_3	43				// Gotten near spot, fly about there.
 #define	AISS_1a	44				//	Pick a new nearby spot because we are endangered, then go to AISS_2

 #define MAX_AI_GOALS	5
@@ -60,12 +82,24 @@ extern ai_flag_name Ai_flag_names[];
 // have priority over others (i.e. when a player issues a goal to a wing, then a seperate
 // goal to a ship in that wing).  We would probably use this type in conjunction with
 // goal priority to establish which goal to follow
-#define AIG_TYPE_EVENT_SHIP			1		// from mission event direct to ship
-#define AIG_TYPE_EVENT_WING			2		// from mission event direct to wing
+#define AIG_TYPE_EVENT_SHIP		1		// from mission event direct to ship
+#define AIG_TYPE_EVENT_WING		2		// from mission event direct to wing
 #define AIG_TYPE_PLAYER_SHIP		3		// from player direct to ship
 #define AIG_TYPE_PLAYER_WING		4		// from player direct to wing
 #define AIG_TYPE_DYNAMIC			5		// created on the fly

+// flags for AI_GOALS
+#define AIGF_DOCKER_INDEX_VALID		(1<<0)	// when set, index field for docker is valid
+#define AIGF_DOCKEE_INDEX_VALID		(1<<1)	// when set, index field for dockee is valid
+#define AIGF_GOAL_ON_HOLD			(1<<2)	// when set, this goal cannot currently be satisfied, although it could be in the future
+#define AIGF_SUBSYS_NEEDS_FIXUP		(1<<3)	// when set, the subsystem index (for a destroy subsystem goal) is invalid and must be gotten from the subsys name stored in docker.name field!!
+#define AIGF_GOAL_OVERRIDE			(1<<4)	// paired with AIG_TYPE_DYNAMIC to mean this goal overrides any other goal
+#define AIGF_PURGE					(1<<5)	// purge this goal next time we process
+#define AIGF_GOALS_PURGED			(1<<6)	// this goal has already caused other goals to get purged
+#define AIGF_DOCK_SOUND_PLAYED		(1<<7)	// Goober5000 - replacement for AL's hack ;)
+
+#define AIGF_DOCK_INDEXES_VALID		(AIGF_DOCKER_INDEX_VALID|AIGF_DOCKEE_INDEX_VALID)
+
 //	Flags to ai_turn_towards_vector().
 #define	AITTV_FAST					(1<<0)	//	Turn fast, not slowed down based on skill level.
 #define AITTV_VIA_SEXP				(1<<1)	//	Goober5000 - via sexp
@@ -73,21 +107,29 @@ extern ai_flag_name Ai_flag_names[];

 #define	KAMIKAZE_HULL_ON_DEATH	-1000.0f	//	Hull strength ship gets set to if it crash-dies.

+// flags for possible ai overrides
+#define AIORF_FULL					(1<<0)	//	Full sexp control
+#define AIORF_ROLL					(1<<1)	//	Sexp forced roll maneuver
+#define AIORF_PITCH					(1<<2)	//	Sexp forced pitch change
+#define AIORF_HEADING				(1<<3)	//	Sexp forced heading change
+#define AIORF_FULL_LAT				(1<<4)	//  full control over up/side/forward movement
+#define AIORF_UP					(1<<5)	//	vertical movement
+#define AIORF_SIDEWAYS				(1<<6)	//	horizontal movement
+#define AIORF_FORWARD				(1<<7)	//	forward movement
+
 // structure for AI goals
 typedef struct ai_goal {
 	int	signature;			//	Unique identifier.  All goals ever created (per mission) have a unique signature.
 	int	ai_mode;				// one of the AIM_* modes for this goal
 	int	ai_submode;			// maybe need a submode
 	int	type;					// one of the AIG_TYPE_* values above
-	flagset<AI::Goal_Flags>	flags;				// one of the AIGF_* values above
+	int	flags;				// one of the AIGF_* values above
 	fix	time;					// time at which this goal was issued.
 	int	priority;			// how important is this goal -- number 0 - 100
-
-	char	*target_name;		// name of the thing that this goal acts upon
-	int		target_name_index;	// index of goal_target_name in Goal_target_names[][]
-	waypoint_list *wp_list;		// waypoints that this ship might fly.
-	int target_instance;		// instance of thing this ship might be chasing (currently only used for weapons; note, not the same as objnum!)
-	int	target_signature;		// signature of object this ship might be chasing (currently only used for weapons; paired with above value to confirm target)
+	char	*ship_name;			// name of the ship that this goal acts upon
+	int	ship_name_index;	// index of ship_name in Goal_ship_names[][]
+	int	wp_index;			// index into waypoints list of waypoints that this ship might fly.
+	int	weapon_signature;	// signature of weapon this ship might be chasing.  Paired with above value to get target.

 	// unions for docking stuff.
 	// (AIGF_DOCKER_INDEX_VALID and AIGF_DOCKEE_INDEX_VALID tell us to use indexes; otherwise we use names)
@@ -104,7 +146,7 @@ typedef struct ai_goal {

 } ai_goal;

-#define	MAX_GOAL_TARGET_NAMES	100
+#define	MAX_GOAL_SHIP_NAMES	100

 #define	AIM_CHASE				0
 #define	AIM_EVADE				1
@@ -114,25 +156,25 @@ typedef struct ai_goal {
 #define	AIM_GUARD				5		//	Guard an object
 #define	AIM_AVOID				6		//	Avoid an object
 #define	AIM_WAYPOINTS			7		//	Fly waypoints
-#define	AIM_DOCK				8		//	Dock with ship.
-#define	AIM_NONE				9		//	Uh, do nothing.
+#define	AIM_DOCK					8		//	Dock with ship.
+#define	AIM_NONE					9		//	Uh, do nothing.
 #define	AIM_BIGSHIP				10		//	Like a capital ship, doesn't focus on one ship.
-#define	AIM_PATH				11		//	Follow path on ship
+#define	AIM_PATH					11		//	Follow path on ship
 #define	AIM_BE_REARMED			12		//	Allow self to be rearmed
 #define	AIM_SAFETY				13		//	Seek safety at periphery of battle
 #define	AIM_EVADE_WEAPON		14		//	Evade a weapon.
-#define	AIM_STRAFE				15		//  Attack a big ship by strafing it
+#define	AIM_STRAFE				15		// attack a big ship by strafing it
 #define	AIM_PLAY_DEAD			16		//	Play dead.  Get it?  Don't move, fire, etc.
-#define	AIM_BAY_EMERGE			17		//  Emerging from a fighter bay, following path to do so
-#define	AIM_BAY_DEPART			18		//  Departing to a fighter bay, following path to do so
-#define	AIM_SENTRYGUN			19		//  AI mode for sentry guns only (floating turrets)
+#define	AIM_BAY_EMERGE			17		// Emerging from a fighter bay, following path to do so
+#define	AIM_BAY_DEPART			18		// Departing to a fighter bay, following path to do so
+#define	AIM_SENTRYGUN			19		// AI mode for sentry guns only (floating turrets)
 #define	AIM_WARP_OUT			20		//	Commence warp out sequence.  Point in legal direction.  Then call John's code.
-#define AIM_FLY_TO_SHIP			21		//  [Kazan] Fly to a ship, doesn't matter if it's hostile or friendly -- for Autopilot usage
+#define AIM_FLY_TO_SHIP			21		// [Kazan] Fly to a ship, doesn't matter if it's hostile or friendly -- for Autopilot usage

-#define	MAX_AI_BEHAVIORS		22		//	Number of AIM_xxxx types
+#define	MAX_AI_BEHAVIORS		22	//	Number of AIM_xxxx types

 #define	MAX_WAYPOINTS_PER_LIST	20
-#define	MAX_ENEMY_DISTANCE	2500.0f		//	Maximum distance from which a ship will pursue an enemy.
+#define	MAX_ENEMY_DISTANCE	2500.0f			//	maximum distance from which a ship will pursue an enemy.

 #define AI_GOAL_NONE				-1

@@ -170,8 +212,10 @@ typedef struct ai_class {
 	int		ai_chance_to_use_missiles_on_plr[NUM_SKILL_LEVELS];
 	float	ai_max_aim_update_delay[NUM_SKILL_LEVELS];
 	float	ai_turret_max_aim_update_delay[NUM_SKILL_LEVELS];
-	flagset<AI::Profile_Flags>		ai_profile_flags;		//Holds the state of flags that are set
-	flagset<AI::Profile_Flags>		ai_profile_flags_set;	//Holds which flags are set and which are just left alone
+	int		ai_profile_flags;		//Holds the state of flags that are set
+	int		ai_profile_flags_set;	//Holds which flags are set and which are just left alone
+	int		ai_profile_flags2;		
+	int		ai_profile_flags2_set;	

 	//SUSHI: These are optional overrides to an AI class to prevent the automatic scaling based on AI class index
 	int		ai_aburn_use_factor[NUM_SKILL_LEVELS];		
@@ -207,12 +251,13 @@ typedef struct ai_class {
 #define AIS_CHASE_CIRCLESTRAFE	19	// Attempt a circle-strafe on the target

 //	Submodes for docking behavior
-#define	AIS_DOCK_0		20
-#define	AIS_DOCK_1		21
-#define	AIS_DOCK_2		22
-#define	AIS_DOCK_3		23
-#define	AIS_DOCK_4		24			//	Only for rearm/repair.
-#define	AIS_DOCK_4A		25			//	Only for not rearm/repair.  MK, 7/15/97
+#define	AIS_DOCK_0		21
+#define	AIS_DOCK_1		22
+#define	AIS_DOCK_2		23
+#define	AIS_DOCK_3		24
+//#define	AIS_DOCK_3A		25
+#define	AIS_DOCK_4		26			//	Only for rearm/repair.
+#define	AIS_DOCK_4A		27			//	Only for not rearm/repair.  MK, 7/15/97
 #define	AIS_UNDOCK_0	30
 #define	AIS_UNDOCK_1	31
 #define	AIS_UNDOCK_2	32
@@ -268,7 +313,7 @@ extern pnode	*Ppfp;			//	Free pointer in path points.
 #define MAX_IGNORE_NEW_OBJECTS	7

 typedef struct ai_info {
-	flagset<AI::AI_Flags> ai_flags;				//	Special flags for AI behavior.
+	int		ai_flags;				//	Special flags for AI behavior.
 	int		shipnum;					// Ship using this slot, -1 means none.
 	int		type;						//	
 	int		wing;						//	Member of what wing? -1 means none. 
@@ -310,10 +355,11 @@ typedef struct ai_info {
 	int		ai_class;				//	Class.  Might be override of default.

 	//	Probably become obsolete, to be replaced by path_start, path_cur, etc.
-	waypoint_list	*wp_list;		// waypoint list being followed
-	size_t			 wp_index;		// waypoint index in list
+	int		wp_list;					// waypoint list index
+	int		wp_index;				// waypoint index in list
 	int		wp_flags;				//	waypoint flags, see WPF_xxxx
-	int		waypoint_speed_cap;		// -1 no cap, otherwise cap - changed to int by Goober5000
+	int		wp_dir;					//	1 or -1, amount to add to get to next waypoint index.
+	int		waypoint_speed_cap;	// -1 no cap, otherwise cap - changed to int by Goober5000

 	//	Path following information
 	int		path_start;				//	Index into global array, start of path.
@@ -330,7 +376,6 @@ typedef struct ai_info {
 	fix		path_next_check_time;	//	Last time checked to see if would collide with model.
 	int		path_goal_dist;		// minimum distance to first path point to consider path reached
 	int		path_subsystem_next_check;	// timestamp to next check if subsystem is still visible
-	vec3d	path_depart_orient;		//Rotational orientation associated with the path

 	int		submode;
 	int		previous_submode;		// previous submode, get it?
@@ -401,7 +446,8 @@ typedef struct ai_info {
 	int		ai_chance_to_use_missiles_on_plr;
 	float	ai_max_aim_update_delay;
 	float	ai_turret_max_aim_update_delay;
-	flagset<AI::Profile_Flags> ai_profile_flags;	//Holds AI_Profiles flags (possibly overriden by AI class) that actually apply to AI
+	int		ai_profile_flags;	//Holds AI_Profiles flags (possibly overriden by AI class) that actually apply to AI
+	int		ai_profile_flags2;	


 	union {
@@ -415,6 +461,9 @@ typedef struct ai_info {

 	float		aspect_locked_time;				//	Time towards acquiring lock for current_target

+//	ship_subsys	*targeted_subobject;			//	subsystem to attack
+//	int		attack_subsystem_parent;		//	objnum of the object containing the attack_subsystem
+
 	// Goober5000
 	int		support_ship_objnum;			// objnum of support ship docking with us, or (if we're a support ship) object we're docking to
 	int		support_ship_signature;			// signature of the same
@@ -460,7 +509,7 @@ typedef struct ai_info {
 	int		self_destruct_timestamp;		//	Time at which to self-destruct, probably due to being disabled.
 	int		ok_to_target_timestamp;			//	Time at which this ship can dynamically target.

-	int		kamikaze_damage;					// some damage value used to produce a shockwave from a kamikaze ship
+	float		kamikaze_damage;					// some damage value used to produce a shockwave from a kamikaze ship
 	vec3d	big_attack_point;					//	Global point this ship is attacking on a big ship.
 	vec3d	big_attack_surface_normal;		// Surface normal at ship at big_attack_point;
 	int		pick_big_attack_point_timestamp; //	timestamp at which to pick a new point to attack on a big ship.
@@ -485,22 +534,11 @@ typedef struct ai_info {
 	vec3d	artillery_lock_pos;				// base position of the lock point on (in model's frame of reference)
 	float		lethality;							// measure of how dangerous ship is to enemy BIG|HUGE ships (likelyhood of targeting)

-	flagset<AI::Maneuver_Override_Flags>	ai_override_flags;			// flags for marking ai overrides from sexp or lua systems
+	int		ai_override_flags;			// flags for marking ai overrides from sexp or lua systems
 	control_info	ai_override_ci;		// ai override control info
 	int		ai_override_timestamp;		// mark for when to end the current override
 } ai_info;

-// Goober5000
-typedef struct {
-	vec3d docker_point;
-	vec3d dockee_point;
-	int dock_mode;
-	int submodel;
-	vec3d submodel_pos;
-	float submodel_r;
-	float submodel_w;
-} rotating_dockpoint_info;
-
 #define	MAX_AI_INFO	 MAX_SHIPS

 // SUBSYS_PATH_DIST is used as the distance that a subsystem path should terminate from the actual
@@ -513,8 +551,8 @@ typedef struct {
 #define BURST_DURATION		500	// decay time over which Player->damage_this_burst falls from MAX_BURST_DAMAGE to 0

 extern int Mission_all_attack;	//	!0 means all teams attack all teams.
-extern int Total_goal_target_names;
-extern char Goal_target_names[MAX_GOAL_TARGET_NAMES][NAME_LENGTH];
+extern int Total_goal_ship_names;
+extern char Goal_ship_names[MAX_GOAL_SHIP_NAMES][NAME_LENGTH];

 extern void update_ai_info_for_hit(int hitter_obj, int hit_obj);
 extern void ai_frame_all(void);
@@ -530,7 +568,7 @@ extern char** Ai_class_names;
 extern int Num_ai_classes;
 extern int Ai_firing_enabled;

-extern const char *Skill_level_names(int skill_level, int translate = 1);
+extern char	*Skill_level_names(int skill_level, int translate = 1);
 extern int Ai_goal_signature;

 // need access to following data in AiBig.cpp
@@ -556,20 +594,21 @@ void ai_process( object * obj, int ai_index, float frametime );
 int get_wingnum(int objnum);

 void set_wingnum(int objnum, int wingnum);
-char *ai_get_goal_target_name(const char *name, int *index);
+char *ai_get_goal_ship_name(char *name, int *index);

 extern void init_ai_system(void);
-extern void ai_attack_object(object *attacker, object *attacked, ship_subsys *ssp, int ship_info_index = -1);
+extern void ai_attack_object(object *attacker, object *attacked, ship_subsys *ssp);
 extern void ai_evade_object(object *evader, object *evaded);
 extern void ai_ignore_object(object *ignorer, object *ignored, int ignore_new);
-extern void ai_ignore_wing(object *ignorer, int wingnum);
+extern void ai_ignore_wing(object *ignorer, int wingnum, int priority);
 extern void ai_dock_with_object(object *docker, int docker_index, object *dockee, int dockee_index, int dock_type);
 extern void ai_stay_still(object *still_objp, vec3d *view_pos);
+extern void ai_set_default_behavior(object *obj, int classnum);
 extern void ai_do_default_behavior(object *obj);
-extern void ai_start_waypoints(object *objp, waypoint_list *wp_list, int wp_flags);
-extern void ai_ship_hit(object *objp_ship, object *hit_objp, vec3d *hit_normal);
-extern void ai_ship_destroy(int shipnum);
-extern void ai_turn_towards_vector(vec3d *dest, object *objp, float turn_time, vec3d *slide_vec, vec3d *rel_pos, float bank_override, int flags, vec3d *rvec = nullptr, int sexp_flags = 0);
+extern void ai_start_waypoints(object *objp, int waypoint_list_index, int wp_flags);
+extern void ai_ship_hit(object *objp_ship, object *hit_objp, vec3d *hitpos, int shield_quadrant, vec3d *hit_normal);
+extern void ai_ship_destroy(int shipnum, int method);
+extern void ai_turn_towards_vector(vec3d *dest, object *objp, float frametime, float turn_time, vec3d *slide_vec, vec3d *rel_pos, float bank_override, int flags, vec3d *rvec = NULL, int sexp_flags = 0);
 extern void init_ai_object(int objnum);
 extern void ai_init(void);				//	Call this one to parse ai.tbl.
 extern void ai_level_init(void);		//	Call before each level to reset AI
@@ -587,10 +626,13 @@ extern void get_absolute_wing_pos_autopilot( vec3d *result_pos, object *leader_o

 //	Interface from goals code to AI.  Set ship to guard.  *objp guards *other_objp
 extern void ai_set_guard_object(object *objp, object *other_objp);
+extern void ai_set_evade_object(object *objp, object *other_objp);
 extern void ai_set_guard_wing(object *objp, int wingnum);
 extern void ai_warp_out(object *objp, vec3d *vp);
 extern void ai_attack_wing(object *attacker, int wingnum);
 extern void ai_deathroll_start(object *ship_obj);
+extern void ai_fly_in_formation(int wing_num);		//	Force wing to fly in formation.
+extern void ai_disband_formation(int wing_num);		//	Force wing to disband formation flying.
 extern int set_target_objnum(ai_info *aip, int objnum);
 extern void ai_form_on_wing(object *objp, object *goal_objp);
 extern void ai_do_stay_near(object *objp, object *other_obj, float dist);
@@ -619,14 +661,14 @@ extern float ai_path();
 extern void evade_weapon();
 extern int might_collide_with_ship(object *obj1, object *obj2, float dot_to_enemy, float dist_to_enemy, float duration);
 extern int ai_fire_primary_weapon(object *objp);	//changed to return weather it fired-Bobboau
-extern int ai_fire_secondary_weapon(object *objp);
+extern int ai_fire_secondary_weapon(object *objp, int priority1 = -1, int priority2 = -1);
 extern float ai_get_weapon_dist(ship_weapon *swp);
 extern void turn_towards_point(object *objp, vec3d *point, vec3d *slide_vec, float bank_override);
 extern int ai_maybe_fire_afterburner(object *objp, ai_info *aip);
 extern void set_predicted_enemy_pos(vec3d *predicted_enemy_pos, object *pobjp, vec3d *enemy_pos, vec3d *enemy_vel, ai_info *aip);

 extern int is_instructor(object *objp);
-extern int find_enemy(int objnum, float range, int max_attackers, int ship_info_index = -1);
+extern int find_enemy(int objnum, float range, int max_attackers);

 float ai_get_weapon_speed(ship_weapon *swp);
 void set_predicted_enemy_pos_turret(vec3d *predicted_enemy_pos, vec3d *gun_pos, object *pobjp, vec3d *enemy_pos, vec3d *enemy_vel, float weapon_speed, float time_enemy_in_range);
@@ -639,14 +681,12 @@ extern void ai_do_objects_docked_stuff(object *docker, int docker_point, object
 extern void ai_do_objects_undocked_stuff( object *docker, object *dockee );
 extern void ai_do_objects_repairing_stuff( object *repaired_obj, object *repair_obj, int how );

-// Goober5000
-//	Move to a position relative to a dock bay using thrusters.
-extern float dock_orient_and_approach(object *docker_objp, int docker_index, object *dockee_objp, int dockee_index, int dock_mode, rotating_dockpoint_info *rdinfo = NULL);
+extern int find_danger_weapon(object *sobjp, float dtime, float *atime, float dot_threshhold);

 void ai_set_mode_warp_out(object *objp, ai_info *aip);

 // prototyped by Goober5000
-int get_nearest_objnum(int objnum, int enemy_team_mask, int enemy_wing, float range, int max_attackers, int ship_info_index);
+int get_nearest_objnum(int objnum, int enemy_team_mask, int enemy_wing, float range, int max_attackers);

 // moved to header file by Goober5000
 void ai_announce_ship_dying(object *dying_objp);
@@ -661,7 +701,8 @@ void process_subobjects(int objnum);
 //SUSHI: Setting ai_info stuff from both ai class and ai profile
 void init_aip_from_class_and_profile(ai_info *aip, ai_class *aicp, ai_profile_t *profile);

-void ai_update_aim(ai_info *aip);
+//SUSHI: Updating AI aim
+void ai_update_aim(ai_info *aip, object* En_Objp);

 //SUSHI: Random evasive sidethrust
 void do_random_sidethrust(ai_info *aip, ship_info *sip);
@@ -1,124 +0,0 @@
-#ifndef AI_FLAGS_H
-#define AI_FLAGS_H
-
-#include "globalincs/flagset.h"
-
-namespace AI {
-	FLAG_LIST(AI_Flags) {
-		Formation_wing,				//	Fly in formation as part of wing.
-		Awaiting_repair,			//	Awaiting a repair ship.
-		Being_repaired,				//	Currently docked with repair ship.
-		Repairing,					//	Repairing a ship (or going to repair a ship)
-		Seek_lock,					//	set if should focus on gaining aspect lock, not hitting with lasers
-		Formation_object,			//	Fly in formation off a specific object.
-		Temporary_ignore,			//	Means current ignore_objnum is only temporary, not an order from the player.
-		Use_exit_path,				//  Used by path code, to flag path as an exit path
-		Use_static_path,			//  Used by path code, use fixed path, don't try to recreate
-		Target_collision,			//	Collided with aip->target_objnum last frame.  Avoid that ship for half a second or so.
-		Unload_secondaries,			//	Fire secondaries as fast as possible!
-		On_subsys_path,				//  Current path leads to a subsystem
-		Avoid_shockwave_ship,		//	Avoid an existing shockwave from a ship.
-		Avoid_shockwave_weapon,		//	Avoid an expected shockwave from a weapon.  shockwave_object field contains object index.
-		Avoid_shockwave_started,	//	Already started avoiding shockwave, don't keep deciding whether to avoid.
-		Attack_slowly,				//	Move slowly while attacking.
-		Repair_obstructed,			//	Ship wants to be repaired, but path is obstructed.
-		Kamikaze,					//	Crash into target
-		No_dynamic,					//	Not allowed to get dynamic goals
-		Avoiding_small_ship,		//	Avoiding a player ship.
-		Avoiding_big_ship,			//	Avoiding a large ship.
-		Big_ship_collide_recover_1,	//	Collided into a big ship.  Recovering by flying away.
-		Big_ship_collide_recover_2,	//	Collided into a big ship.  Fly towards big ship sphere perimeter.
-		Stealth_pursuit,			//  AI is trying to fight stealth ship
-		Unload_primaries,			//	Fire primaries as fast as possible!
-		Trying_unsuccessfully_to_warp,	// Trying to warp, but can't warp at the moment
-		Free_afterburner_use,		// Use afterburners while following waypoints or flying towards objects
-
-		NUM_VALUES
-	};
-
-	FLAG_LIST(Goal_Flags) {
-		Docker_index_valid,	// when set, index field for docker is valid
-		Dockee_index_valid,	// when set, index field for dockee is valid
-		Goal_on_hold,		// when set, this goal cannot currently be satisfied, although it could be in the future
-		Subsys_needs_fixup,	// when set, the subsystem index (for a destroy subsystem goal) is invalid and must be gotten from the subsys name stored in docker.name field!!
-		Goal_override,		// paired with AIG_TYPE_DYNAMIC to mean this goal overrides any other goal
-		Purge,				// purge this goal next time we process
-		Goals_purged,		// this goal has already caused other goals to get purged
-		Depart_sound_played,// Goober5000 - replacement for AL's hack ;)
-		Target_own_team,
-
-		NUM_VALUES
-	};
-
-	FLAG_LIST(Maneuver_Override_Flags) {
-		Full,		//	Full sexp control
-		Roll,		//	Sexp forced roll maneuver
-		Pitch,		//	Sexp forced pitch change
-		Heading,	//	Sexp forced heading change
-		Full_lat,	//  full control over up/side/forward movement
-		Up,			//	vertical movement
-		Sideways,	//	horizontal movement
-		Forward,	//	forward movement
-
-		NUM_VALUES
-	};
-
-	FLAG_LIST(Profile_Flags) {
-        Advanced_turret_fov_edge_checks,
-        Ai_aims_from_ship_center,
-        Ai_can_slow_down_attacking_big_ships,
-        Ai_guards_specific_ship_in_wing,
-        All_ships_manage_shields,
-        Allow_multi_event_scoring,
-        Allow_primary_link_at_start,
-        Allow_rapid_secondary_dumbfire,
-        Allow_turrets_target_weapons_freely,
-        Allow_vertical_dodge,
-        Aspect_invulnerability_fix,
-        Aspect_lock_countermeasure,
-        Assist_scoring_scales_with_damage,
-        Beams_damage_weapons,
-        Big_ships_can_attack_beam_turrets_on_untargeted_ships,
-        Disable_linked_fire_penalty,
-        Disable_weapon_damage_scaling,
-        Dont_insert_random_turret_fire_delay,
-        Fix_ai_class_bug,
-        Fix_ai_path_order_bug,
-        Fix_heat_seeker_stealth_bug,
-        Fix_linked_primary_bug,
-        Force_beam_turret_fov,
-		Free_afterburner_use,
-        Glide_decay_requires_thrust,
-        Hack_improve_non_homing_swarm_turret_fire_accuracy,
-        Huge_turret_weapons_ignore_bombs,
-        Include_beams_in_stat_calcs,
-        Kill_scoring_scales_with_damage,
-        Multi_allow_empty_primaries,
-        Multi_allow_empty_secondaries,
-        Navigation_subsys_governs_warp,
-        No_min_dock_speed_cap,
-        No_special_player_avoid,
-        No_warp_camera,
-        Perform_fewer_scream_checks,
-        Player_weapon_scale_fix,
-        Prevent_targeting_bombs_beyond_range,
-        Require_turret_to_have_target_in_fov,
-        Shockwaves_damage_small_ship_subsystems,
-        Smart_afterburner_management,
-        Smart_primary_weapon_selection,
-        Smart_secondary_weapon_selection,
-        Smart_shield_management,
-        Smart_subsystem_targeting_for_turrets,
-        Strict_turred_tagged_only_targeting,
-		Support_dont_add_primaries, //Prevents support ship from equipping new primary as requested in http://scp.indiegames.us/mantis/view.php?id=3198
-        Turrets_ignore_target_radius,
-        Use_actual_primary_range,
-        Use_additive_weapon_velocity,
-        Use_newtonian_dampening,
-        Use_only_single_fov_for_turrets,
-
-		NUM_VALUES
-	};
-}
-
-#endif
@@ -8,13 +8,10 @@


 #include "globalincs/pstypes.h"
-#include "def_files/def_files.h"
+#include "globalincs/def_files.h"
 #include "ai/ai_profiles.h"
-#include "globalincs/pstypes.h"
-#include "localization/localize.h"
 #include "parse/parselo.h"
-#include "ship/ship.h"
-#include "weapon/weapon.h"
+#include "localization/localize.h"


 // global stuff
@@ -28,499 +25,394 @@ static char Default_profile_name[NAME_LENGTH];


 // utility
-void set_flag(ai_profile_t *profile, const char *name, AI::Profile_Flags flag)
+void set_flag(ai_profile_t *profile, char *name, int flag, int type)
 {
 	if (optional_string(name))
 	{
 		bool val;
 		stuff_boolean(&val);
-        profile->flags.set(flag, val);
+
+		if (type == AIP_FLAG) {
+			if (val)
+				profile->flags |= flag;
+			else
+				profile->flags &= ~flag;
+		} else {
+			if (val)
+				profile->flags2 |= flag;
+			else
+				profile->flags2 &= ~flag;
+		}
 	}
 }

-const char *AI_path_types[] = {
-	"normal",
-	"alt1",
-};
-
-int Num_ai_path_types = sizeof(AI_path_types)/sizeof(char*);
-
-int ai_path_type_match(char *p)
+void parse_ai_profiles_tbl(char *filename)
 {
-	int i;
-	for(i = 0; i < Num_ai_path_types; i++)
-	{
-		if(!stricmp(AI_path_types[i], p))
-			return i;
-	}
-
-	return -1;
-}
-
-void parse_ai_profiles_tbl(const char *filename)
-{
-	int i;
+	int i, rval;
 	char profile_name[NAME_LENGTH];
 	ai_profile_t dummy_profile;
 	char *saved_Mp = NULL;
-	char buf[NAME_LENGTH];

-	try
+	// open localization
+	lcl_ext_open();
+
+	if ((rval = setjmp(parse_abort)) != 0)
 	{
-		if (filename == NULL)
-			read_file_text_from_default(defaults_get_file("ai_profiles.tbl"));
-		else
-			read_file_text(filename, CF_TYPE_TABLES);
-
-		reset_parse();
-
-
-		// start parsing
-		required_string("#AI Profiles");
-
-		// new default?
-		if (optional_string("$Default Profile:"))
-			stuff_string(Default_profile_name, F_NAME, NAME_LENGTH);
-
-		// begin reading data
-		while (required_string_either("#End", "$Profile Name:"))
-		{
-			ai_profile_t *profile = &dummy_profile;
-			ai_profile_t *previous_profile = NULL;
-			bool no_create = false;
-
-			// get the name
-			required_string("$Profile Name:");
-			stuff_string(profile_name, F_NAME, NAME_LENGTH);
-
-			// see if it exists
-			for (i = 0; i < Num_ai_profiles; i++)
-			{
-				if (!stricmp(Ai_profiles[i].profile_name, profile_name))
-				{
-					previous_profile = &Ai_profiles[i];
-					break;
-				}
-			}
-
-			// modular table stuff
-			if (optional_string("+nocreate"))
-			{
-				no_create = true;
-
-				// use the previous one if possible,
-				// otherwise continue to use the dummy one
-				if (previous_profile != NULL)
-					profile = previous_profile;
-			}
-			else
-			{
-				// don't create multiple profiles with the same name
-				if (previous_profile != NULL)
-				{
-					Warning(LOCATION, "An ai profile named '%s' already exists!  The new one will not be created.\n", profile_name);
-				}
-				else
-				{
-					// make sure we're under the limit
-					if (Num_ai_profiles >= MAX_AI_PROFILES)
-					{
-						Warning(LOCATION, "Too many profiles in ai_profiles.tbl!  Max is %d.\n", MAX_AI_PROFILES - 1);	// -1 because one is built-in
-						skip_to_string("#End", NULL);
-						break;
-					}
-
-					profile = &Ai_profiles[Num_ai_profiles];
-					Num_ai_profiles++;
-				}
-			}
-
-			// initialize profile if we're not building from a previously parsed one
-			if (!no_create)
-			{
-				// base profile, so zero it out
-				if (profile == &Ai_profiles[0])
-				{
-                    profile->reset();
-				}
-				// brand new profile, so set it to the base defaults
-				else
-				{
-                    *profile = Ai_profiles[0];
-				}
-			}
-
-			// set the name
-			strcpy_s(profile->profile_name, profile_name);
-
-
-			// fill in any and all settings; they're all optional and can be in any order
-			while (!check_for_string("$Profile Name:") && !check_for_string("#End"))
-			{
-				if (optional_string("$Player Afterburner Recharge Scale:"))
-					parse_float_list(profile->afterburner_recharge_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Max Beam Friendly Fire Damage:"))
-					parse_float_list(profile->beam_friendly_damage_cap, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Player Countermeasure Life Scale:"))
-					parse_float_list(profile->cmeasure_life_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$AI Countermeasure Firing Chance:"))
-					parse_float_list(profile->cmeasure_fire_chance, NUM_SKILL_LEVELS);
-
-				if (optional_string("$AI In Range Time:"))
-					parse_float_list(profile->in_range_time, NUM_SKILL_LEVELS);
-
-				if (optional_string("$AI Always Links Ammo Weapons:"))
-					parse_float_list(profile->link_ammo_levels_always, NUM_SKILL_LEVELS);
-
-				if (optional_string("$AI Maybe Links Ammo Weapons:"))
-					parse_float_list(profile->link_ammo_levels_maybe, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Primary Ammo Burst Multiplier:"))
-					parse_float_list(profile->primary_ammo_burst_mult, NUM_SKILL_LEVELS);
-
-				if (optional_string("$AI Always Links Energy Weapons:"))
-					parse_float_list(profile->link_energy_levels_always, NUM_SKILL_LEVELS);
-
-				if (optional_string("$AI Maybe Links Energy Weapons:"))
-					parse_float_list(profile->link_energy_levels_maybe, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Max Missles Locked on Player:") || optional_string("$Max Missiles Locked on Player:"))
-					parse_int_list(profile->max_allowed_player_homers, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Max Player Attackers:"))
-					parse_int_list(profile->max_attackers, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Max Incoming Asteroids:"))
-					parse_int_list(profile->max_incoming_asteroids, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Player Damage Factor:") || optional_string("$AI Damage Reduction to Player Hull:"))
-					parse_float_list(profile->player_damage_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Player Subsys Damage Factor:") || optional_string("$AI Damage Reduction to Player Subsys:"))
-					parse_float_list(profile->subsys_damage_scale, NUM_SKILL_LEVELS);
-
-				// represented in fractions of F1_0
-				if (optional_string("$Predict Position Delay:"))
-				{
-					int iLoop;
-					float temp_list[NUM_SKILL_LEVELS];
-
-					parse_float_list(temp_list, NUM_SKILL_LEVELS);
-
-					for (iLoop = 0; iLoop < NUM_SKILL_LEVELS; iLoop++)
-						profile->predict_position_delay[iLoop] = fl2f(temp_list[iLoop]);
-				}
-
-				if (optional_string("$AI Shield Manage Delay:") || optional_string("$AI Shield Manage Delays:"))
-					parse_float_list(profile->shield_manage_delay, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Friendly AI Fire Delay Scale:"))
-					parse_float_list(profile->ship_fire_delay_scale_friendly, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Hostile AI Fire Delay Scale:"))
-					parse_float_list(profile->ship_fire_delay_scale_hostile, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Friendly AI Secondary Fire Delay Scale:"))
-					parse_float_list(profile->ship_fire_secondary_delay_scale_friendly, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Hostile AI Secondary Fire Delay Scale:"))
-					parse_float_list(profile->ship_fire_secondary_delay_scale_hostile, NUM_SKILL_LEVELS);
-
-				if (optional_string("$AI Turn Time Scale:"))
-					parse_float_list(profile->turn_time_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Glide Attack Percent:")) {
-					parse_float_list(profile->glide_attack_percent, NUM_SKILL_LEVELS);
-					//Percent is nice for modders, but here in the code we want it betwwen 0 and 1.0
-					//While we're at it, verify the range
-					for (i = 0; i < NUM_SKILL_LEVELS; i++) {
-						if (profile->glide_attack_percent[i] < 0.0f || profile->glide_attack_percent[i] > 100.0f) {
-							Warning(LOCATION, "$Glide Attack Percent should be between 0 and 100.0 (read %f). Setting to 0.", profile->glide_attack_percent[i]);
-							profile->glide_attack_percent[i] = 0.0f;
-						}
-						profile->glide_attack_percent[i] /= 100.0;
-					}
-				}
-
-				if (optional_string("$Circle Strafe Percent:")) {
-					parse_float_list(profile->circle_strafe_percent, NUM_SKILL_LEVELS);
-					//Percent is nice for modders, but here in the code we want it betwwen 0 and 1.0
-					//While we're at it, verify the range
-					for (i = 0; i < NUM_SKILL_LEVELS; i++) {
-						if (profile->circle_strafe_percent[i] < 0.0f || profile->circle_strafe_percent[i] > 100.0f) {
-							Warning(LOCATION, "$Circle Strafe Percent should be between 0 and 100.0 (read %f). Setting to 0.", profile->circle_strafe_percent[i]);
-							profile->circle_strafe_percent[i] = 0.0f;
-						}
-						profile->circle_strafe_percent[i] /= 100.0;
-					}
-				}
-
-				if (optional_string("$Glide Strafe Percent:")) {
-					parse_float_list(profile->glide_strafe_percent, NUM_SKILL_LEVELS);
-					//Percent is nice for modders, but here in the code we want it betwwen 0 and 1.0
-					//While we're at it, verify the range
-					for (i = 0; i < NUM_SKILL_LEVELS; i++) {
-						if (profile->glide_strafe_percent[i] < 0.0f || profile->glide_strafe_percent[i] > 100.0f) {
-							Warning(LOCATION, "$Glide Strafe Percent should be between 0 and 100.0 (read %f). Setting to 0.", profile->glide_strafe_percent[i]);
-							profile->glide_strafe_percent[i] = 0.0f;
-						}
-						profile->glide_strafe_percent[i] /= 100.0;
-					}
-				}
-
-				if (optional_string("$Random Sidethrust Percent:")) {
-					parse_float_list(profile->random_sidethrust_percent, NUM_SKILL_LEVELS);
-					//Percent is nice for modders, but here in the code we want it betwwen 0 and 1.0
-					//While we're at it, verify the range
-					for (i = 0; i < NUM_SKILL_LEVELS; i++) {
-						if (profile->random_sidethrust_percent[i] < 0.0f || profile->random_sidethrust_percent[i] > 100.0f) {
-							Warning(LOCATION, "$Random Sidethrust Percent should be between 0 and 100.0 (read %f). Setting to 0.", profile->random_sidethrust_percent[i]);
-							profile->random_sidethrust_percent[i] = 0.0f;
-						}
-						profile->random_sidethrust_percent[i] /= 100.0;
-					}
-				}
-
-				if (optional_string("$Stalemate Time Threshold:"))
-					parse_float_list(profile->stalemate_time_thresh, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Stalemate Distance Threshold:"))
-					parse_float_list(profile->stalemate_dist_thresh, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Player Shield Recharge Scale:"))
-					parse_float_list(profile->shield_energy_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Player Weapon Recharge Scale:"))
-					parse_float_list(profile->weapon_energy_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Max Turret Target Ownage:"))
-					parse_int_list(profile->max_turret_ownage_target, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Max Turret Player Ownage:"))
-					parse_int_list(profile->max_turret_ownage_player, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Percentage Required For Kill Scale:"))
-					parse_float_list(profile->kill_percentage_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Percentage Required For Assist Scale:"))
-					parse_float_list(profile->assist_percentage_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Percentage Awarded For Capship Assist:"))
-					parse_float_list(profile->assist_award_percentage_scale, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Repair Penalty:"))
-					parse_int_list(profile->repair_penalty, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Delay Before Allowing Bombs to Be Shot Down:"))
-					parse_float_list(profile->delay_bomb_arm_timer, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Chance AI Has to Fire Missiles at Player:"))
-					parse_int_list(profile->chance_to_use_missiles_on_plr, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Max Aim Update Delay:"))
-					parse_float_list(profile->max_aim_update_delay, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Turret Max Aim Update Delay:"))
-					parse_float_list(profile->turret_max_aim_update_delay, NUM_SKILL_LEVELS);
-
-				if (optional_string("$Player Autoaim FOV:"))
-				{
-					float fov_list[NUM_SKILL_LEVELS];
-					parse_float_list(fov_list, NUM_SKILL_LEVELS);
-					for (i = 0; i < NUM_SKILL_LEVELS; i++)
-					{
-						//Enforce range
-						if (fov_list[i] < 0.0f || fov_list[i] >= 360.0f)
-						{
-							Warning(LOCATION, "$Player Autoaim FOV should be >= 0 and < 360.0 (read %f). Setting to 0.", fov_list[i]);
-							fov_list[i] = 0.0f;
-						}
-
-						//Convert units
-						profile->player_autoaim_fov[i] = fov_list[i] * PI / 180.0f;
-					}
-				}
-
-				if (optional_string("$Detail Distance Multiplier:"))
-					parse_float_list(profile->detail_distance_mult, MAX_DETAIL_LEVEL + 1);
-
-				set_flag(profile, "$big ships can attack beam turrets on untargeted ships:", AI::Profile_Flags::Big_ships_can_attack_beam_turrets_on_untargeted_ships);
-
-				set_flag(profile, "$smart primary weapon selection:", AI::Profile_Flags::Smart_primary_weapon_selection);
-
-				set_flag(profile, "$smart secondary weapon selection:", AI::Profile_Flags::Smart_secondary_weapon_selection);
-
-				set_flag(profile, "$smart shield management:", AI::Profile_Flags::Smart_shield_management);
-
-				set_flag(profile, "$smart afterburner management:", AI::Profile_Flags::Smart_afterburner_management);
-
-				set_flag(profile, "$free afterburner use:", AI::Profile_Flags::Free_afterburner_use);
-
-				set_flag(profile, "$allow rapid secondary dumbfire:", AI::Profile_Flags::Allow_rapid_secondary_dumbfire);
-
-				set_flag(profile, "$huge turret weapons ignore bombs:", AI::Profile_Flags::Huge_turret_weapons_ignore_bombs);
-
-				set_flag(profile, "$don't insert random turret fire delay:", AI::Profile_Flags::Dont_insert_random_turret_fire_delay);
-
-				set_flag(profile, "$hack improve non-homing swarm turret fire accuracy:", AI::Profile_Flags::Hack_improve_non_homing_swarm_turret_fire_accuracy);
-
-				set_flag(profile, "$shockwaves damage small ship subsystems:", AI::Profile_Flags::Shockwaves_damage_small_ship_subsystems);
-
-				set_flag(profile, "$navigation subsystem governs warpout capability:", AI::Profile_Flags::Navigation_subsys_governs_warp);
-
-				set_flag(profile, "$ignore lower bound for minimum speed of docked ship:", AI::Profile_Flags::No_min_dock_speed_cap);
-
-				set_flag(profile, "$disable linked fire penalty:", AI::Profile_Flags::Disable_linked_fire_penalty);
-
-				set_flag(profile, "$disable weapon damage scaling:", AI::Profile_Flags::Disable_weapon_damage_scaling);
-
-				set_flag(profile, "$use additive weapon velocity:", AI::Profile_Flags::Use_additive_weapon_velocity);
-
-				set_flag(profile, "$use newtonian dampening:", AI::Profile_Flags::Use_newtonian_dampening);
-
-				set_flag(profile, "$include beams for kills and assists:", AI::Profile_Flags::Include_beams_in_stat_calcs);
-
-				set_flag(profile, "$score kills based on damage caused:", AI::Profile_Flags::Kill_scoring_scales_with_damage);
-
-				set_flag(profile, "$score assists based on damage caused:", AI::Profile_Flags::Assist_scoring_scales_with_damage);
-
-				set_flag(profile, "$allow event and goal scoring in multiplayer:", AI::Profile_Flags::Allow_multi_event_scoring);
-
-				set_flag(profile, "$fix linked primary weapon decision bug:", AI::Profile_Flags::Fix_linked_primary_bug);
-
-				set_flag(profile, "$prevent turrets targeting too distant bombs:", AI::Profile_Flags::Prevent_targeting_bombs_beyond_range);
-
-				set_flag(profile, "$smart subsystem targeting for turrets:", AI::Profile_Flags::Smart_subsystem_targeting_for_turrets);
-
-				set_flag(profile, "$fix heat seekers homing on stealth ships bug:", AI::Profile_Flags::Fix_heat_seeker_stealth_bug);
-
-				set_flag(profile, "$multi allow empty primaries:", AI::Profile_Flags::Multi_allow_empty_primaries);
-
-				set_flag(profile, "$multi allow empty secondaries:", AI::Profile_Flags::Multi_allow_empty_secondaries);
-
-				set_flag(profile, "$allow turrets target weapons freely:", AI::Profile_Flags::Allow_turrets_target_weapons_freely);
-
-				set_flag(profile, "$use only single fov for turrets:", AI::Profile_Flags::Use_only_single_fov_for_turrets);
-
-				set_flag(profile, "$allow vertical dodge:", AI::Profile_Flags::Allow_vertical_dodge);
-
-				set_flag(profile, "$force beam turrets to use normal fov:", AI::Profile_Flags::Force_beam_turret_fov);
-
-				set_flag(profile, "$fix ai class bug:", AI::Profile_Flags::Fix_ai_class_bug);
-
-				set_flag(profile, "$turrets ignore targets radius in range checks:", AI::Profile_Flags::Turrets_ignore_target_radius);
-
-				set_flag(profile, "$no extra collision avoidance vs player:", AI::Profile_Flags::No_special_player_avoid);
-
-				set_flag(profile, "$perform fewer checks for death screams:", AI::Profile_Flags::Perform_fewer_scream_checks);
-
-				set_flag(profile, "$advanced turret fov edge checks:", AI::Profile_Flags::Advanced_turret_fov_edge_checks);
-
-				set_flag(profile, "$require turrets to have target in fov:", AI::Profile_Flags::Require_turret_to_have_target_in_fov);
-
-				set_flag(profile, "$all ships manage shields:", AI::Profile_Flags::All_ships_manage_shields);
-
-				set_flag(profile, "$ai aims from ship center:", AI::Profile_Flags::Ai_aims_from_ship_center);
-
-				set_flag(profile, "$allow primary link at mission start:", AI::Profile_Flags::Allow_primary_link_at_start);
-
-				set_flag(profile, "$allow beams to damage bombs:", AI::Profile_Flags::Beams_damage_weapons);
-
-				set_flag(profile, "$disable weapon damage scaling for player:", AI::Profile_Flags::Player_weapon_scale_fix);
-
-				set_flag(profile, "$countermeasures affect aspect seekers:", AI::Profile_Flags::Aspect_lock_countermeasure);
-
-				set_flag(profile, "$ai guards specific ship in wing:", AI::Profile_Flags::Ai_guards_specific_ship_in_wing);
-
-				set_flag(profile, "$support don't add primaries:", AI::Profile_Flags::Support_dont_add_primaries);
-
-				profile->ai_path_mode = AI_PATH_MODE_NORMAL;
-				if (optional_string("$ai path mode:"))
-				{
-					stuff_string(buf, F_NAME, NAME_LENGTH);
-					int j = ai_path_type_match(buf);
-					if (j >= 0) {
-						profile->ai_path_mode = j;
-					}
-					else {
-						Warning(LOCATION, "Invalid ai path mode '%s' specified", buf);
-					}
-				}
-
-				set_flag(profile, "$no warp camera:", AI::Profile_Flags::No_warp_camera);
-
-				set_flag(profile, "$fix ai path order bug:", AI::Profile_Flags::Fix_ai_path_order_bug);
-
-				set_flag(profile, "$strict turret-tagged-only targeting:", AI::Profile_Flags::Strict_turred_tagged_only_targeting);
-
-				set_flag(profile, "$aspect bomb invulnerability fix:", AI::Profile_Flags::Aspect_invulnerability_fix);
-
-				set_flag(profile, "$glide decay requires thrust:", AI::Profile_Flags::Glide_decay_requires_thrust);
-
-				set_flag(profile, "$ai can slow down when attacking big ships:", AI::Profile_Flags::Ai_can_slow_down_attacking_big_ships);
-
-				set_flag(profile, "$use actual primary range:", AI::Profile_Flags::Use_actual_primary_range);
-
-				profile->bay_arrive_speed_mult = 1.0f;
-				profile->bay_depart_speed_mult = 1.0f;
-				if (optional_string("$bay arrive speed multiplier:")) {
-					stuff_float(&profile->bay_arrive_speed_mult);
-				}
-				if (optional_string("$bay depart speed multiplier:")) {
-					stuff_float(&profile->bay_depart_speed_mult);
-				}
-
-				// ----------
-
-				// compatibility
-				if (optional_string("$perform less checks for death screams:"))
-				{
-					mprintf(("Warning: \"$perform less checks for death screams\" flag is deprecated in favor of \"$perform fewer checks for death screams\"\n"));
-					bool temp;
-					stuff_boolean(&temp);
-                    profile->flags.set(AI::Profile_Flags::Perform_fewer_scream_checks, temp);
-				}
-				if (optional_string("$allow primary link delay:"))
-				{
-					mprintf(("Warning: \"$allow primary link delay\" flag is deprecated in favor of \"$allow primary link at mission start\"\n"));
-					bool temp;
-					stuff_boolean(&temp);
-                    profile->flags.set(AI::Profile_Flags::Allow_primary_link_at_start, !temp);
-				}
-
-
-				// if we've been through once already and are at the same place, force a move
-				if (saved_Mp && (saved_Mp == Mp))
-				{
-					char tmp[60];
-					memset(tmp, 0, 60);
-					strncpy(tmp, Mp, 59);
-					mprintf(("WARNING: Unrecognized parameter in ai_profiles: %s\n", tmp));
-
-					Mp++;
-				}
-
-				// find next valid option
-				if (!skip_to_start_of_string_either("$", "#"))
-					break;
-				saved_Mp = Mp;
-			}
-		}
-
-		required_string("#End");
-	}
-	catch (const parse::ParseException& e)
-	{
-		mprintf(("TABLES: Unable to parse '%s'!  Error message = %s.\n", (filename) ? filename : "<default ai_profiles.tbl>", e.what()));
+		mprintf(("TABLES: Unable to parse '%s'!  Error code = %i.\n", (filename) ? filename : "<default ai_profiles.tbl>", rval));
+		lcl_ext_close();
 		return;
 	}

+	if (filename == NULL)
+		read_file_text_from_array(defaults_get_file("ai_profiles.tbl"));
+	else
+		read_file_text(filename, CF_TYPE_TABLES);
+
+	reset_parse();		
+
+
+	// start parsing
+	required_string("#AI Profiles");
+
+	// new default?
+	if (optional_string("$Default Profile:"))
+		stuff_string(Default_profile_name, F_NAME, NAME_LENGTH);
+
+	// begin reading data
+	while (required_string_either("#End","$Profile Name:"))
+	{
+		ai_profile_t *profile = &dummy_profile;
+		ai_profile_t *previous_profile = NULL;
+		bool no_create = false;
+		
+		// get the name
+		required_string("$Profile Name:");
+		stuff_string(profile_name, F_NAME, NAME_LENGTH);
+
+		// see if it exists
+		for (i = 0; i < Num_ai_profiles; i++)
+		{
+			if (!stricmp(Ai_profiles[i].profile_name, profile_name))
+			{
+				previous_profile = &Ai_profiles[i];
+				break;
+			}
+		}
+
+		// modular table stuff
+		if (optional_string("+nocreate"))
+		{
+			no_create = true;
+
+			// use the previous one if possible,
+			// otherwise continue to use the dummy one
+			if (previous_profile != NULL)
+				profile = previous_profile;
+		}
+		else
+		{
+			// don't create multiple profiles with the same name
+			if (previous_profile != NULL)
+			{
+				Warning(LOCATION, "An ai profile named '%s' already exists!  The new one will not be created.\n", profile_name);
+			}
+			else
+			{
+				// make sure we're under the limit
+				if (Num_ai_profiles >= MAX_AI_PROFILES)
+				{
+					Warning(LOCATION, "Too many profiles in ai_profiles.tbl!  Max is %d.\n", MAX_AI_PROFILES-1);	// -1 because one is built-in
+					skip_to_string("#End", NULL);
+					break;
+				}
+
+				profile = &Ai_profiles[Num_ai_profiles];
+				Num_ai_profiles++;
+			}
+		}
+
+		// initialize profile if we're not building from a previously parsed one
+		if (!no_create)
+		{
+			// base profile, so zero it out
+			if (profile == &Ai_profiles[0])
+			{
+				memset(profile, 0, sizeof(ai_profile_t));
+			}
+			// brand new profile, so set it to the base defaults
+			else
+			{
+				memcpy(profile, &Ai_profiles[0], sizeof(ai_profile_t));
+			}
+		}
+
+		// set the name
+		strcpy_s(profile->profile_name, profile_name);
+
+
+		// fill in any and all settings; they're all optional and can be in any order
+		while (!check_for_string("$Profile Name:") && !check_for_string("#End"))
+		{
+			if (optional_string("$Player Afterburner Recharge Scale:"))
+				parse_float_list(profile->afterburner_recharge_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Max Beam Friendly Fire Damage:"))
+				parse_float_list(profile->beam_friendly_damage_cap, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Player Countermeasure Life Scale:"))
+				parse_float_list(profile->cmeasure_life_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$AI Countermeasure Firing Chance:"))
+				parse_float_list(profile->cmeasure_fire_chance, NUM_SKILL_LEVELS);
+
+			if (optional_string("$AI In Range Time:"))
+				parse_float_list(profile->in_range_time, NUM_SKILL_LEVELS);
+
+			if (optional_string("$AI Always Links Ammo Weapons:"))
+				parse_float_list(profile->link_ammo_levels_always, NUM_SKILL_LEVELS);
+
+			if (optional_string("$AI Maybe Links Ammo Weapons:"))
+				parse_float_list(profile->link_ammo_levels_maybe, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Primary Ammo Burst Multiplier:"))
+				parse_float_list(profile->primary_ammo_burst_mult, NUM_SKILL_LEVELS);
+
+			if (optional_string("$AI Always Links Energy Weapons:"))
+				parse_float_list(profile->link_energy_levels_always, NUM_SKILL_LEVELS);
+
+			if (optional_string("$AI Maybe Links Energy Weapons:"))
+				parse_float_list(profile->link_energy_levels_maybe, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Max Missles Locked on Player:"))
+				parse_int_list(profile->max_allowed_player_homers, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Max Player Attackers:"))
+				parse_int_list(profile->max_attackers, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Max Incoming Asteroids:"))
+				parse_int_list(profile->max_incoming_asteroids, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Player Damage Factor:") || optional_string("$AI Damage Reduction to Player Hull:"))
+				parse_float_list(profile->player_damage_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Player Subsys Damage Factor:") || optional_string("$AI Damage Reduction to Player Subsys:"))
+				parse_float_list(profile->subsys_damage_scale, NUM_SKILL_LEVELS);
+
+			// represented in fractions of F1_0
+			if (optional_string("$Predict Position Delay:"))
+			{
+				int iLoop;
+				float temp_list[NUM_SKILL_LEVELS];
+
+				parse_float_list(temp_list, NUM_SKILL_LEVELS);
+
+				for (iLoop = 0; iLoop < NUM_SKILL_LEVELS; iLoop++)
+					profile->predict_position_delay[iLoop] = fl2f(temp_list[iLoop]);
+			}
+
+			if (optional_string("$Player Shield Recharge Scale:"))
+				parse_float_list(profile->shield_energy_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$AI Shield Manage Delay:") || optional_string("$AI Shield Manage Delays:"))
+				parse_float_list(profile->shield_manage_delay, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Friendly AI Fire Delay Scale:"))
+				parse_float_list(profile->ship_fire_delay_scale_friendly, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Hostile AI Fire Delay Scale:"))
+				parse_float_list(profile->ship_fire_delay_scale_hostile, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Friendly AI Secondary Fire Delay Scale:"))
+				parse_float_list(profile->ship_fire_secondary_delay_scale_friendly, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Hostile AI Secondary Fire Delay Scale:"))
+				parse_float_list(profile->ship_fire_secondary_delay_scale_hostile, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Player Subsys Damage Factor:") || optional_string("$AI Damage Reduction to Player Subsys:"))
+				parse_float_list(profile->subsys_damage_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$AI Turn Time Scale:"))
+				parse_float_list(profile->turn_time_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Glide Attack Percent:")) {
+				parse_float_list(profile->glide_attack_percent, NUM_SKILL_LEVELS);
+				//Percent is nice for modders, but here in the code we want it betwwen 0 and 1.0
+				//While we're at it, verify the range
+				for (int i = 0; i < NUM_SKILL_LEVELS; i++) {
+					if (profile->glide_attack_percent[i] < 0.0f || profile->glide_attack_percent[i] > 100.0f) {
+						profile->glide_attack_percent[i] = 0.0f;
+						Warning(LOCATION, "$Glide Attack Percent should be between 0 and 100.0 (read %f). Setting to 0.", profile->glide_attack_percent[i]);
+					}
+					profile->glide_attack_percent[i] /= 100.0;
+				}
+			}
+
+			if (optional_string("$Circle Strafe Percent:")) {
+				parse_float_list(profile->circle_strafe_percent, NUM_SKILL_LEVELS);
+				//Percent is nice for modders, but here in the code we want it betwwen 0 and 1.0
+				//While we're at it, verify the range
+				for (int i = 0; i < NUM_SKILL_LEVELS; i++) {
+					if (profile->circle_strafe_percent[i] < 0.0f || profile->circle_strafe_percent[i] > 100.0f) {
+						profile->circle_strafe_percent[i] = 0.0f;
+						Warning(LOCATION, "$Circle Strafe Percent should be between 0 and 100.0 (read %f). Setting to 0.", profile->circle_strafe_percent[i]);
+					}
+					profile->circle_strafe_percent[i] /= 100.0;
+				}
+			}
+
+			if (optional_string("$Glide Strafe Percent:")) {
+				parse_float_list(profile->glide_strafe_percent, NUM_SKILL_LEVELS);
+				//Percent is nice for modders, but here in the code we want it betwwen 0 and 1.0
+				//While we're at it, verify the range
+				for (int i = 0; i < NUM_SKILL_LEVELS; i++) {
+					if (profile->glide_strafe_percent[i] < 0.0f || profile->glide_strafe_percent[i] > 100.0f) {
+						profile->glide_strafe_percent[i] = 0.0f;
+						Warning(LOCATION, "$Glide Strafe Percent should be between 0 and 100.0 (read %f). Setting to 0.", profile->glide_strafe_percent[i]);
+					}
+					profile->glide_strafe_percent[i] /= 100.0;
+				}
+			}
+
+			if (optional_string("$Random Sidethrust Percent:")) {
+				parse_float_list(profile->random_sidethrust_percent, NUM_SKILL_LEVELS);
+				//Percent is nice for modders, but here in the code we want it betwwen 0 and 1.0
+				//While we're at it, verify the range
+				for (int i = 0; i < NUM_SKILL_LEVELS; i++) {
+					if (profile->random_sidethrust_percent[i] < 0.0f || profile->random_sidethrust_percent[i] > 100.0f) {
+						profile->random_sidethrust_percent[i] = 0.0f;
+						Warning(LOCATION, "$Random Sidethrust Percent should be between 0 and 100.0 (read %f). Setting to 0.", profile->random_sidethrust_percent[i]);
+					}
+					profile->random_sidethrust_percent[i] /= 100.0;
+				}
+			}
+
+			if (optional_string("$Stalemate Time Threshold:"))
+				parse_float_list(profile->stalemate_time_thresh, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Stalemate Distance Threshold:"))
+				parse_float_list(profile->stalemate_dist_thresh, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Player Weapon Recharge Scale:"))
+				parse_float_list(profile->weapon_energy_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Max Turret Target Ownage:"))
+				parse_int_list(profile->max_turret_ownage_target, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Max Turret Player Ownage:"))
+				parse_int_list(profile->max_turret_ownage_player, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Percentage Required For Kill Scale:"))
+				parse_float_list(profile->kill_percentage_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Percentage Required For Assist Scale:"))
+				parse_float_list(profile->assist_percentage_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Percentage Awarded For Capship Assist:"))
+				parse_float_list(profile->assist_award_percentage_scale, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Repair Penalty:"))
+				parse_int_list(profile->repair_penalty, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Delay Before Allowing Bombs to Be Shot Down:"))
+				parse_float_list(profile->delay_bomb_arm_timer, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Chance AI Has to Fire Missiles at Player:"))
+				parse_int_list(profile->chance_to_use_missiles_on_plr, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Max Aim Update Delay:"))
+				parse_float_list(profile->max_aim_update_delay, NUM_SKILL_LEVELS);
+
+			if (optional_string("$Turret Max Aim Update Delay:"))
+				parse_float_list(profile->turret_max_aim_update_delay, NUM_SKILL_LEVELS);
+
+			set_flag(profile, "$big ships can attack beam turrets on untargeted ships:", AIPF_BIG_SHIPS_CAN_ATTACK_BEAM_TURRETS_ON_UNTARGETED_SHIPS, AIP_FLAG);
+
+			set_flag(profile, "$smart primary weapon selection:", AIPF_SMART_PRIMARY_WEAPON_SELECTION, AIP_FLAG);
+
+			set_flag(profile, "$smart secondary weapon selection:", AIPF_SMART_SECONDARY_WEAPON_SELECTION, AIP_FLAG);
+
+			set_flag(profile, "$smart shield management:", AIPF_SMART_SHIELD_MANAGEMENT, AIP_FLAG);
+
+			set_flag(profile, "$smart afterburner management:", AIPF_SMART_AFTERBURNER_MANAGEMENT, AIP_FLAG);
+
+			set_flag(profile, "$allow rapid secondary dumbfire:", AIPF_ALLOW_RAPID_SECONDARY_DUMBFIRE, AIP_FLAG);
+			
+			set_flag(profile, "$huge turret weapons ignore bombs:", AIPF_HUGE_TURRET_WEAPONS_IGNORE_BOMBS, AIP_FLAG);
+
+			set_flag(profile, "$don't insert random turret fire delay:", AIPF_DONT_INSERT_RANDOM_TURRET_FIRE_DELAY, AIP_FLAG);
+
+			set_flag(profile, "$hack improve non-homing swarm turret fire accuracy:", AIPF_HACK_IMPROVE_NON_HOMING_SWARM_TURRET_FIRE_ACCURACY, AIP_FLAG);
+
+			set_flag(profile, "$shockwaves damage small ship subsystems:", AIPF_SHOCKWAVES_DAMAGE_SMALL_SHIP_SUBSYSTEMS, AIP_FLAG);
+
+			set_flag(profile, "$navigation subsystem governs warpout capability:", AIPF_NAVIGATION_SUBSYS_GOVERNS_WARP, AIP_FLAG);
+
+			set_flag(profile, "$ignore lower bound for minimum speed of docked ship:", AIPF_NO_MIN_DOCK_SPEED_CAP, AIP_FLAG);
+
+			set_flag(profile, "$disable linked fire penalty:", AIPF_DISABLE_LINKED_FIRE_PENALTY, AIP_FLAG);
+
+			set_flag(profile, "$disable weapon damage scaling:", AIPF_DISABLE_WEAPON_DAMAGE_SCALING, AIP_FLAG);
+
+			set_flag(profile, "$use additive weapon velocity:", AIPF_USE_ADDITIVE_WEAPON_VELOCITY, AIP_FLAG);
+
+			set_flag(profile, "$use newtonian dampening:", AIPF_USE_NEWTONIAN_DAMPENING, AIP_FLAG);
+
+			set_flag(profile, "$include beams for kills and assists:", AIPF_INCLUDE_BEAMS_IN_STAT_CALCS, AIP_FLAG);
+
+			set_flag(profile, "$score kills based on damage caused:", AIPF_KILL_SCORING_SCALES_WITH_DAMAGE, AIP_FLAG);
+
+			set_flag(profile, "$score assists based on damage caused:", AIPF_ASSIST_SCORING_SCALES_WITH_DAMAGE, AIP_FLAG);
+
+			set_flag(profile, "$allow event and goal scoring in multiplayer:", AIPF_ALLOW_MULTI_EVENT_SCORING, AIP_FLAG);
+
+			set_flag(profile, "$fix linked primary weapon decision bug:", AIPF_FIX_LINKED_PRIMARY_BUG, AIP_FLAG);
+
+			set_flag(profile, "$prevent turrets targeting too distant bombs:", AIPF_PREVENT_TARGETING_BOMBS_BEYOND_RANGE, AIP_FLAG);
+
+			set_flag(profile, "$smart subsystem targeting for turrets:", AIPF_SMART_SUBSYSTEM_TARGETING_FOR_TURRETS, AIP_FLAG);
+
+			set_flag(profile, "$fix heat seekers homing on stealth ships bug:", AIPF_FIX_HEAT_SEEKER_STEALTH_BUG, AIP_FLAG);
+
+			set_flag(profile, "$multi allow empty primaries:", AIPF_MULTI_ALLOW_EMPTY_PRIMARIES, AIP_FLAG);
+
+			set_flag(profile, "$multi allow empty secondaries:", AIPF_MULTI_ALLOW_EMPTY_SECONDARIES, AIP_FLAG);
+
+			set_flag(profile, "$allow turrets target weapons freely:", AIPF_ALLOW_TURRETS_TARGET_WEAPONS_FREELY, AIP_FLAG);
+
+			set_flag(profile, "$use only single fov for turrets:", AIPF_USE_ONLY_SINGLE_FOV_FOR_TURRETS, AIP_FLAG);
+
+			set_flag(profile, "$allow vertical dodge:", AIPF_ALLOW_VERTICAL_DODGE, AIP_FLAG);
+
+			set_flag(profile, "$force beam turrets to use normal fov:", AIPF_FORCE_BEAM_TURRET_FOV, AIP_FLAG);
+
+			set_flag(profile, "$fix ai class bug:", AIPF_FIX_AI_CLASS_BUG, AIP_FLAG);
+
+			set_flag(profile, "$turrets ignore targets radius in range checks:", AIPF2_TURRETS_IGNORE_TARGET_RADIUS, AIP_FLAG2);
+
+			set_flag(profile, "$no extra collision avoidance vs player:", AIPF2_NO_SPECIAL_PLAYER_AVOID, AIP_FLAG2);
+
+			set_flag(profile, "$perform less checks for death screams:", AIPF2_PERFORM_LESS_SCREAM_CHECKS, AIP_FLAG2);
+
+			set_flag(profile, "$all ships manage shields:", AIPF2_ALL_SHIPS_MANAGE_SHIELDS, AIP_FLAG2);
+
+			// if we've been through once already and are at the same place, force a move
+			if ( saved_Mp && (saved_Mp == Mp) )
+				Mp++;
+
+			// find next valid option
+			skip_to_start_of_string_either("$", "#");
+			saved_Mp = Mp;
+		}
+	}
+	
+	required_string("#End");
+
 	// add tbl/tbm to multiplayer validation list
-	extern void fs2netd_add_table_validation(const char *tblname);
+	extern void fs2netd_add_table_validation(char *tblname);
 	fs2netd_add_table_validation(filename);
+
+	// close localization
+	lcl_ext_close();
 }

 void ai_profiles_init()
@@ -560,72 +452,3 @@ int ai_profile_lookup(char *name)

 	return -1;
 }
-
-void ai_profile_t::reset()
-{
-    memset(profile_name, 0, sizeof(profile_name));
-
-    flags.reset();
-
-    ai_path_mode = 0;
-    bay_arrive_speed_mult = 0;
-    bay_depart_speed_mult = 0;
-
-    for (int i = 0; i < NUM_SKILL_LEVELS; ++i) {
-        max_incoming_asteroids[i] = 0;
-        max_allowed_player_homers[i] = 0;
-        max_attackers[i] = 0;
-        predict_position_delay[i] = 0;
-        in_range_time[i] = 0;
-        shield_manage_delay[i] = 0;
-
-        link_energy_levels_always[i] = 0;
-        link_energy_levels_maybe[i] = 0;
-
-        link_ammo_levels_always[i] = 0;
-        link_ammo_levels_maybe[i] = 0;
-        primary_ammo_burst_mult[i] = 0;
-
-        cmeasure_life_scale[i] = 0;
-        cmeasure_fire_chance[i] = 0;
-        weapon_energy_scale[i] = 0;
-        shield_energy_scale[i] = 0;
-        afterburner_recharge_scale[i] = 0;
-        player_damage_scale[i] = 0;
-
-        subsys_damage_scale[i] = 0;
-        beam_friendly_damage_cap[i] = 0;
-        turn_time_scale[i] = 0;
-        glide_attack_percent[i] = 0;
-        circle_strafe_percent[i] = 0;
-        glide_strafe_percent[i] = 0;
-        random_sidethrust_percent[i] = 0;
-        stalemate_time_thresh[i] = 0;
-        stalemate_dist_thresh[i] = 0;
-        max_aim_update_delay[i] = 0;
-        turret_max_aim_update_delay[i] = 0;
-
-        ship_fire_delay_scale_hostile[i] = 0;
-        ship_fire_delay_scale_friendly[i] = 0;
-
-        ship_fire_secondary_delay_scale_hostile[i] = 0;
-        ship_fire_secondary_delay_scale_friendly[i] = 0;
-
-        max_turret_ownage_target[i] = 0;
-        max_turret_ownage_player[i] = 0;
-
-        kill_percentage_scale[i] = 0;
-        assist_percentage_scale[i] = 0;
-
-        assist_award_percentage_scale[i] = 0;
-
-        repair_penalty[i] = 0;
-        delay_bomb_arm_timer[i] = 0;
-        chance_to_use_missiles_on_plr[i] = 0;
-        player_autoaim_fov[i] = 0;
-    }
-
-    for (int i = 0; i <= MAX_DETAIL_LEVEL; ++i) {
-        detail_distance_mult[i] = 0;
-    }
-}
@@ -9,22 +9,61 @@
 #ifndef _AI_PROFILES_H_
 #define _AI_PROFILES_H_

-#include "globalincs/globals.h"
 #include "globalincs/pstypes.h"
+#include "globalincs/globals.h"
 #include "globalincs/systemvars.h"
-#include "ai/ai_flags.h"

-// AI Path types
-#define	AI_PATH_MODE_NORMAL 0
-#define	AI_PATH_MODE_ALT1	1
-	
+// flag int defines
+#define AIP_FLAG		1
+#define AIP_FLAG2		2
+
+// flags
+#define AIPF_SMART_SHIELD_MANAGEMENT								(1 << 0)
+#define AIPF_BIG_SHIPS_CAN_ATTACK_BEAM_TURRETS_ON_UNTARGETED_SHIPS	(1 << 1)
+#define AIPF_SMART_PRIMARY_WEAPON_SELECTION							(1 << 2)
+#define AIPF_SMART_SECONDARY_WEAPON_SELECTION						(1 << 3)
+#define AIPF_ALLOW_RAPID_SECONDARY_DUMBFIRE							(1 << 4)
+#define AIPF_HUGE_TURRET_WEAPONS_IGNORE_BOMBS						(1 << 5)
+#define AIPF_DONT_INSERT_RANDOM_TURRET_FIRE_DELAY					(1 << 6)
+#define AIPF_HACK_IMPROVE_NON_HOMING_SWARM_TURRET_FIRE_ACCURACY		(1 << 7)
+#define AIPF_SHOCKWAVES_DAMAGE_SMALL_SHIP_SUBSYSTEMS				(1 << 8)
+#define AIPF_NAVIGATION_SUBSYS_GOVERNS_WARP							(1 << 9)
+#define AIPF_NO_MIN_DOCK_SPEED_CAP									(1 << 10)
+#define AIPF_DISABLE_LINKED_FIRE_PENALTY							(1 << 11)
+#define AIPF_DISABLE_WEAPON_DAMAGE_SCALING							(1 << 12)
+#define AIPF_USE_ADDITIVE_WEAPON_VELOCITY							(1 << 13)
+#define AIPF_USE_NEWTONIAN_DAMPENING								(1 << 14)
+#define AIPF_INCLUDE_BEAMS_IN_STAT_CALCS							(1 << 15)
+#define AIPF_KILL_SCORING_SCALES_WITH_DAMAGE						(1 << 16)
+#define AIPF_ASSIST_SCORING_SCALES_WITH_DAMAGE						(1 << 17)
+#define AIPF_ALLOW_MULTI_EVENT_SCORING								(1 << 18)
+#define AIPF_SMART_AFTERBURNER_MANAGEMENT							(1 << 19)
+#define AIPF_FIX_LINKED_PRIMARY_BUG									(1 << 20)
+#define AIPF_PREVENT_TARGETING_BOMBS_BEYOND_RANGE					(1 << 21)
+#define AIPF_SMART_SUBSYSTEM_TARGETING_FOR_TURRETS					(1 << 22)
+#define AIPF_FIX_HEAT_SEEKER_STEALTH_BUG							(1 << 23)
+#define AIPF_MULTI_ALLOW_EMPTY_PRIMARIES							(1 << 24)
+#define AIPF_MULTI_ALLOW_EMPTY_SECONDARIES							(1 << 25)
+#define AIPF_ALLOW_TURRETS_TARGET_WEAPONS_FREELY                    (1 << 26)
+#define AIPF_USE_ONLY_SINGLE_FOV_FOR_TURRETS						(1 << 27)
+#define AIPF_ALLOW_VERTICAL_DODGE									(1 << 28)	//Allows AI ships to evade weapons vertically as well as horizontally
+#define AIPF_FORCE_BEAM_TURRET_FOV									(1 << 29)
+#define AIPF_FIX_AI_CLASS_BUG										(1 << 30)
+
+// flags2
+#define AIPF2_TURRETS_IGNORE_TARGET_RADIUS							(1 << 0)
+#define AIPF2_NO_SPECIAL_PLAYER_AVOID								(1 << 1)
+#define AIPF2_PERFORM_LESS_SCREAM_CHECKS							(1 << 2)
+#define AIPF2_ALL_SHIPS_MANAGE_SHIELDS										(1 << 3)
+
 #define MAX_AI_PROFILES	5

-class ai_profile_t {
-public:
+typedef struct ai_profile_t {
+
 	char profile_name[NAME_LENGTH];

-    flagset<AI::Profile_Flags> flags;
+	int flags;
+	int flags2;

 	// difficulty-related values
 	int max_incoming_asteroids[NUM_SKILL_LEVELS];			// max number of asteroids thrown at friendlies
@@ -90,27 +129,14 @@ public:
 	// the chance (x/7) that ship is allowed to fire missiles at player ship.
 	int chance_to_use_missiles_on_plr[NUM_SKILL_LEVELS];

-	// Player-specific autoaim FOV override
-	float player_autoaim_fov[NUM_SKILL_LEVELS];

-	float detail_distance_mult[MAX_DETAIL_LEVEL + 1];	//MAX_DETAIL_LEVEL really needs to be 4
-
-	int ai_path_mode;
-
-	// Ships flying bay paths will gradually accelerate/decelerate instead of
-	// flying the whole path at max speed
-	float bay_arrive_speed_mult;
-	float bay_depart_speed_mult;
-
-    void reset();
-};
+} ai_profile_t;


 extern int Num_ai_profiles;
 extern int Default_ai_profile;
 extern ai_profile_t Ai_profiles[MAX_AI_PROFILES];

-#define AI_PROFILES_INDEX(ai_p) ((int)((ai_p) - Ai_profiles))

 void ai_profiles_init();

@@ -10,23 +10,21 @@


 #include "ai/aibig.h"
-#include "ai/aigoals.h"
-#include "freespace.h"
 #include "globalincs/linklist.h"
-#include "iff_defs/iff_defs.h"
-#include "io/timer.h"
-#include "math/staticrand.h"
-#include "mission/missionparse.h"
 #include "object/object.h"
-#include "ship/afterburner.h"
 #include "ship/ship.h"
+#include "ship/afterburner.h"
+#include "freespace2/freespace.h"
 #include "weapon/weapon.h"
+#include "io/timer.h"
+#include "mission/missionparse.h"
+#include "iff_defs/iff_defs.h"
+#include "math/staticrand.h"
+


-#ifdef _MSC_VER
 #pragma optimize("", off)
 #pragma auto_inline(off)
-#endif

 #define SCAN_FIGHTERS_INTERVAL	2000		// how often an AI fighter/bomber should scan for enemy fighter/bombers
 														// if sitting still and pounding on a big ship.  If enemy fighters are
@@ -64,11 +62,10 @@ void	ai_big_chase_attack(ai_info *aip, ship_info *sip, vec3d *enemy_pos, float d
 void	ai_big_avoid_ship();
 int	ai_big_maybe_follow_subsys_path(int do_dot_check=1);
 void ai_big_strafe_position();
-static int ai_big_strafe_maybe_retreat(const vec3d *target_pos);

 extern int model_which_octant_distant_many( vec3d *pnt, int model_num,matrix *model_orient, vec3d * model_pos, polymodel **pm, int *octs);
 extern void compute_desired_rvec(vec3d *rvec, vec3d *goal_pos, vec3d *cur_pos);
-extern void big_ship_collide_recover_start(object *objp, object *big_objp, vec3d *collision_normal);
+extern void big_ship_collide_recover_start(object *objp, object *big_objp, vec3d *collide_pos, vec3d *collision_normal);


 //	Called by ai_big_pick_attack_point.
@@ -119,6 +116,8 @@ void ai_bpap(object *objp, vec3d *attacker_objp_pos, vec3d *attacker_objp_fvec,
 			if (num_tries > octp->nverts)
 				num_tries = octp->nverts;

+			int	best_index = -1;
+
 			for (i=0; i<num_tries; i++) {
 				int	index;
 				float	dist, dot;
@@ -143,6 +142,7 @@ void ai_bpap(object *objp, vec3d *attacker_objp_pos, vec3d *attacker_objp_fvec,

 				if (in_fov) {
 					if (dist < nearest_dist) {
+						best_index = index;
 						nearest_dist = dist;
 						best_point = result_point;
 						*local_attack_point = rel_point;
@@ -173,9 +173,6 @@ done_1:
 	}
 	
 	mc_info mc;
-	mc_info_init(&mc);
-
-	mc.model_instance_num = Ships[objp->instance].model_instance_num;
 	mc.model_num = sip->model_num;
 	mc.orient = &objp->orient;
 	mc.pos = &objp->pos;
@@ -351,8 +348,8 @@ void ai_big_avoid_ship()
 // reset path following information
 void ai_big_subsys_path_cleanup(ai_info *aip)
 {
-	if ( aip->ai_flags[AI::AI_Flags::On_subsys_path] ) {
-		aip->ai_flags.remove(AI::AI_Flags::On_subsys_path);
+	if ( aip->ai_flags & AIF_ON_SUBSYS_PATH ) {
+		aip->ai_flags &= ~AIF_ON_SUBSYS_PATH;
 		aip->path_goal_dist = -1;
 		aip->path_start = -1;
 		aip->path_cur = -1;
@@ -371,25 +368,15 @@ int ai_big_maybe_follow_subsys_path(int do_dot_check)
 	object	*target_objp;

 	aip = &Ai_info[Ships[Pl_objp->instance].ai_index];
-    
-	if ( aip->target_objnum < 0 )
-		return 0;
-    
 	target_objp = &Objects[aip->target_objnum];

-	if ( (aip->targeted_subsys != NULL) && (aip->targeted_subsys->system_info->path_num >= 0) ) {
+	if ( (aip->targeted_subsys != NULL) && (aip->target_objnum >= 0) && (aip->targeted_subsys->system_info->path_num >= 0) ) {
+		polymodel	*pm;
 		int			subsys_path_num, subsys_in_sight, checked_sight;
 		float			dist;

-		// Get models of both source and target
-		polymodel *pm = model_get( Ship_info[Ships[Pl_objp->instance].ship_info_index].model_num );
-		polymodel *pm_t = model_get( Ship_info[Ships[target_objp->instance].ship_info_index].model_num );
-
-		// Necessary sanity check
-		Assertion(aip->targeted_subsys->system_info->path_num < pm_t->n_paths, "Invalid Path number %d for subsystem %s on ship %s (Model: %s)\n", aip->targeted_subsys->system_info->path_num, aip->targeted_subsys->system_info->name, Ship_info[Ships[target_objp->instance].ship_info_index].name, pm_t->filename );
-		if (aip->targeted_subsys->system_info->path_num >= pm_t->n_paths)
-			return 0;
-
+		pm = model_get( Ship_info[Ships[Pl_objp->instance].ship_info_index].model_num );
+	
 		// If attacking a subsystem, ensure that we have an unobstructed line of sight... if not, then move
 		// towards path linked to subsystem
 		subsys_in_sight = 0;	// assume Pl_objp doesn't have line of sight to subys
@@ -433,13 +420,13 @@ int ai_big_maybe_follow_subsys_path(int do_dot_check)

 			aip->path_goal_dist = 5;
 			subsys_path_num = aip->targeted_subsys->system_info->path_num;
-			if ( ((aip->path_start) == -1 || (aip->mp_index != subsys_path_num)) && subsys_path_num < pm_t->n_paths ) {
+			if ( (aip->path_start) == -1 || (aip->mp_index != subsys_path_num) ) {
 				// maybe create a new path
 				if ( subsys_path_num >= 0 ) {
 					Assert(aip->target_objnum >= 0);
 					ai_find_path(Pl_objp, aip->target_objnum, subsys_path_num, 0, 1);
 					if ( aip->path_start >= 0 ) {
-						aip->ai_flags.set(AI::AI_Flags::On_subsys_path);
+						aip->ai_flags |= AIF_ON_SUBSYS_PATH;
 					}
 				}
 			}
@@ -479,6 +466,7 @@ int ai_big_maybe_follow_subsys_path(int do_dot_check)
 					// for now, only follow the path to the first point
 					if ( aip->path_cur < (aip->path_start+aip->path_length-1) ) {
 						if ( aip->goal_objnum != aip->target_objnum ) {
+							//Int3();	// what is going on here? - Get Alan
 							aip->previous_mode = aip->mode;
 							aip->mode = AIM_NONE;
 							aip->submode = -1;
@@ -511,7 +499,7 @@ int ai_big_maybe_start_strafe(ai_info *aip, ship_info *sip)
 {
 	// if moving slowly (or stopped), and SIF_SMALL_SHIP, then enter STRAFE mode if enemy fighter/bombers
 	// are near
-	if ( sip->is_small_ship() ) {
+	if ( sip->flags & SIF_SMALL_SHIP ) {
 		if ( timestamp_elapsed(aip->scan_for_enemy_timestamp) ) {
 			ship_obj	*so;
 			object	*test_objp;
@@ -526,7 +514,7 @@ int ai_big_maybe_start_strafe(ai_info *aip, ship_info *sip)
 				test_sp = &Ships[test_objp->instance];

 				if ( iff_x_attacks_y(Ships[Pl_objp->instance].team, test_sp->team) ) {
-					if ( Ship_info[test_sp->ship_info_index].is_small_ship() ) {
+					if ( Ship_info[test_sp->ship_info_index].flags & SIF_SMALL_SHIP ) {
 						dist_squared = vm_vec_dist_squared(&Pl_objp->pos, &test_objp->pos);
 						if ( dist_squared < ENTER_STRAFE_THREAT_DIST_SQUARED ) {
 							return 1;
@@ -559,7 +547,7 @@ void ai_big_chase_attack(ai_info *aip, ship_info *sip, vec3d *enemy_pos, float d
 			object *objp;
 			for ( objp = GET_FIRST(&obj_used_list); objp !=END_OF_LIST(&obj_used_list); objp = GET_NEXT(objp) ) {
 				if ((objp->type == OBJ_WEAPON) && (iff_x_attacks_y(Ships[Pl_objp->instance].team, Weapons[objp->instance].team)))
-					if (Weapon_info[Weapons[objp->instance].weapon_info_index].subtype == WP_LASER) {
+					if (Weapon_info[objp->instance].subtype == WP_LASER) {
 						vec3d	in_vec;
 						float		dist;

@@ -594,7 +582,7 @@ void ai_big_chase_attack(ai_info *aip, ship_info *sip, vec3d *enemy_pos, float d
 		} // end if ( Pl_objp->phys_info.speed < 3.0f ) 

 		//Maybe enter glide strafe (check every 8 seconds, on a different schedule for each ship)
-		if ((sip->can_glide == true) && !(aip->ai_flags[AI::AI_Flags::Kamikaze]) && static_randf((Missiontime + static_rand(aip->shipnum)) >> 19) < aip->ai_glide_strafe_percent) {
+		if ((sip->can_glide == true) && !(aip->ai_flags & AIF_KAMIKAZE) && static_randf((Missiontime + static_rand(aip->shipnum)) >> 19) < aip->ai_glide_strafe_percent) {
 			aip->previous_mode = aip->mode;
 			aip->mode = AIM_STRAFE;
 			aip->submode_parm0 = Missiontime;	// use parm0 as time strafe mode entered (i.e. MODE start time)
@@ -605,15 +593,11 @@ void ai_big_chase_attack(ai_info *aip, ship_info *sip, vec3d *enemy_pos, float d

 		// see if Pl_objp needs to reposition to get a good shot at subsystem which is being attacked
 		if ( ai_big_maybe_follow_subsys_path() ) {
-			if ((Pl_objp->phys_info.flags & PF_AFTERBURNER_ON) && !(aip->ai_flags[AI::AI_Flags::Kamikaze])) {
-				afterburners_stop(Pl_objp);
-			}
 			return;
 		}

-		vec3d	*rel_pos;
-		vec3d	vec_to_enemy;
-		float	weapon_travel_dist;
+		vec3d	*rel_pos, vec_to_enemy;
+		float		weapon_travel_dist;

 		start_bank = Ships[aip->shipnum].weapons.current_primary_bank;

@@ -632,31 +616,17 @@ void ai_big_chase_attack(ai_info *aip, ship_info *sip, vec3d *enemy_pos, float d
 		else
 			rvec = NULL;

-		ai_turn_towards_vector(enemy_pos, Pl_objp, sip->srotation_time, nullptr, rel_pos, 0.0f, 0, rvec);
+		ai_turn_towards_vector(enemy_pos, Pl_objp, flFrametime, sip->srotation_time, NULL, rel_pos, 0.0f, 0, rvec);

 		// calc range of primary weapon
 		weapon_travel_dist = ai_get_weapon_dist(&Ships[Pl_objp->instance].weapons);

 		if ( aip->targeted_subsys != NULL ) {
-			if (dist_to_enemy > (weapon_travel_dist-20)) {
+			if (dist_to_enemy > (weapon_travel_dist-20))
 				accelerate_ship(aip, 1.0f);
-				
-				ship	*shipp = &Ships[Pl_objp->instance];
-				if ((aip->ai_flags[AI::AI_Flags::Free_afterburner_use] || aip->ai_profile_flags[AI::Profile_Flags::Free_afterburner_use]) && !(shipp->flags[Ship::Ship_Flags::Afterburner_locked]) && (dot_to_enemy > 0.75f)) {
-					if (ai_maybe_fire_afterburner(Pl_objp, aip)) {
-						afterburners_start(Pl_objp);
-						aip->afterburner_stop_time = Missiontime + 3*F1_0;
-					}
-				} else if ((Pl_objp->phys_info.flags & PF_AFTERBURNER_ON) && !(aip->ai_flags[AI::AI_Flags::Kamikaze])) {
-					afterburners_stop(Pl_objp);
-				}
-			} else {
+			else {
 				// AL 12-31-97: Move at least as quickly as your target is moving...
 				accelerate_ship(aip, MAX(1.0f - dot_to_enemy, Objects[aip->target_objnum].phys_info.fspeed/sip->max_speed));
-
-				if ((Pl_objp->phys_info.flags & PF_AFTERBURNER_ON) && !(aip->ai_flags[AI::AI_Flags::Kamikaze])) {
-					afterburners_stop(Pl_objp);
-				}
 			}

 		} else {
@@ -677,22 +647,10 @@ void ai_big_chase_attack(ai_info *aip, ship_info *sip, vec3d *enemy_pos, float d
 			if (dist_to_enemy < ATTACK_STOP_DISTANCE) {
 //				accelerate_ship(aip, accel * 0.5f);
 				accelerate_ship(aip, -1.0f);
-				if ((Pl_objp->phys_info.flags & PF_AFTERBURNER_ON) && !(aip->ai_flags[AI::AI_Flags::Kamikaze])) {
-					afterburners_stop(Pl_objp);
-				}
 			} else {
 				accelerate_ship(aip, accel);
-
-				ship	*shipp = &Ships[Pl_objp->instance];
-				if ((aip->ai_flags[AI::AI_Flags::Free_afterburner_use] || aip->ai_profile_flags[AI::Profile_Flags::Free_afterburner_use]) && !(shipp->flags[Ship::Ship_Flags::Afterburner_locked]) && (accel > 0.95f)) {
-					if (ai_maybe_fire_afterburner(Pl_objp, aip)) {
-						afterburners_start(Pl_objp);
-						aip->afterburner_stop_time = Missiontime + 3*F1_0;
-					}
-				} else if ((Pl_objp->phys_info.flags & PF_AFTERBURNER_ON) && !(aip->ai_flags[AI::AI_Flags::Kamikaze])) {
-					afterburners_stop(Pl_objp);
-				}
 			}
+
 		}
 	}
 }
@@ -708,14 +666,14 @@ extern float set_secondary_fire_delay(ai_info *aip, ship *shipp, weapon_info *sw
 extern void ai_choose_secondary_weapon(object *objp, ai_info *aip, object *en_objp);
 extern int maybe_avoid_big_ship(object *objp, object *ignore_objp, ai_info *aip, vec3d *goal_point, float delta_time);

-extern void maybe_cheat_fire_synaptic(object *objp);
+extern void maybe_cheat_fire_synaptic(object *objp, ai_info *aip);

 // Determine if Pl_objp should fire weapons at current target, based on input parameters
 //
 // dist_to_enemy	=>		distance (in m) to attack point on current target
 // dot_to_enemy	=>		dot product between fvec of Pl_objp and vector from Pl_objp to attack point
 //
-static void ai_big_maybe_fire_weapons(float dist_to_enemy, float dot_to_enemy)
+void ai_big_maybe_fire_weapons(float dist_to_enemy, float dot_to_enemy, vec3d *firing_pos, vec3d *enemy_pos, vec3d *enemy_vel)
 {
 	ai_info		*aip;
 	ship_weapon	*swp;
@@ -749,77 +707,84 @@ static void ai_big_maybe_fire_weapons(float dist_to_enemy, float dot_to_enemy)
 			}

 			if (tswp->num_secondary_banks > 0) {
-				if (!(En_objp->flags[Object::Object_Flags::Protected]) || (aip->goals[0].ai_mode & (AI_GOAL_DISABLE_SHIP | AI_GOAL_DISARM_SHIP))) {
+
+				int	priority1, priority2;
+
+				priority1 = -1;
+				priority2 = -1;
+
+				//	Maybe favor selecting a bomb.
+				//	Note, if you're firing a bomb, if it's aspect seeking, the firing conditions can be looser.
+				if (Ship_info[Ships[En_objp->instance].ship_info_index].flags & (SIF_BIG_SHIP | SIF_HUGE_SHIP))
+					if (En_objp->phys_info.speed * dist_to_enemy < 5000.0f)		//	Don't select a bomb if enemy moving fast relative to distance
+						priority1 = WIF_BOMB;
+
+				if (!(En_objp->flags & OF_PROTECTED)) {
+					//ai_select_secondary_weapon(Pl_objp, tswp, priority1, priority2);	//	Note, need to select to get weapon speed and lifetime
+
 					ai_choose_secondary_weapon(Pl_objp, aip, En_objp);
 					int current_bank = tswp->current_secondary_bank;
-					if (current_bank > -1) {
-						weapon_info	*swip = &Weapon_info[tswp->secondary_bank_weapons[current_bank]];
+					weapon_info	*swip = &Weapon_info[tswp->secondary_bank_weapons[current_bank]];

-						if(!(En_objp->flags[Object::Object_Flags::Protected]) || ((aip->goals[0].ai_mode & (AI_GOAL_DISABLE_SHIP | AI_GOAL_DISARM_SHIP)) && swip->wi_flags[Weapon::Info_Flags::Puncture] )) { //override lockdown on protected ships when using anti subsystem weapons - Valathil
-							//	If ship is protected and very low on hits, don't fire missiles.
-							if (!(En_objp->flags[Object::Object_Flags::Protected]) || (En_objp->hull_strength > 10*swip->damage)) {
-								if (aip->ai_flags[AI::AI_Flags::Unload_secondaries]) {
-									if (timestamp_until(swp->next_secondary_fire_stamp[current_bank]) > swip->fire_wait*1000.0f) {
-										swp->next_secondary_fire_stamp[current_bank] = timestamp((int) (swip->fire_wait*1000.0f));
-									}
-								}
-
-								if (timestamp_elapsed(swp->next_secondary_fire_stamp[current_bank])) {
-									float firing_range;
-									if (swip->wi_flags[Weapon::Info_Flags::Local_ssm])
-										firing_range=swip->lssm_lock_range;
-									else
-										firing_range = MIN((swip->max_speed * swip->lifetime), swip->weapon_range);
-									// reduce firing range of secondaries in nebula
-									extern int Nebula_sec_range;
-									if ((The_mission.flags[Mission::Mission_Flags::Fullneb]) && Nebula_sec_range) {
-										firing_range *= 0.8f;
-									}
-
-									float t = 0.25f;	//	default delay in seconds until next fire.
-
-									if (dist_to_enemy < firing_range*1.0f) {
-
-
-										//vm_vec_scale_add(&future_enemy_pos, enemy_pos, enemy_vel, dist_to_enemy/swip->max_speed);
-										//if (vm_vec_dist_quick(&future_enemy_pos, firing_pos) < firing_range * 0.8f) {
-											if (ai_fire_secondary_weapon(Pl_objp)) {
-
-												int current_bank_adjusted = MAX_SHIP_PRIMARY_BANKS + current_bank;
-
-												if ((aip->ai_flags[AI::AI_Flags::Unload_secondaries]) || (swip->burst_flags[Weapon::Burst_Flags::Fast_firing])) {
-													if (swip->burst_shots > swp->burst_counter[current_bank_adjusted]) {
-														t = swip->burst_delay;
-														swp->burst_counter[current_bank_adjusted]++;
-													} else {
-														t = swip->fire_wait;
-														if ((swip->burst_shots > 0) && (swip->burst_flags[Weapon::Burst_Flags::Random_length])) {
-															swp->burst_counter[current_bank_adjusted] = myrand() % swip->burst_shots;
-														} else {
-															swp->burst_counter[current_bank_adjusted] = 0;
-														}
-													}
-												} else {
-													if (swip->burst_shots > swp->burst_counter[current_bank_adjusted]) {
-														t = set_secondary_fire_delay(aip, temp_shipp, swip, true);
-														swp->burst_counter[current_bank_adjusted]++;
-													} else {
-														t = set_secondary_fire_delay(aip, temp_shipp, swip, false);
-														if ((swip->burst_shots > 0) && (swip->burst_flags[Weapon::Burst_Flags::Random_length])) {
-															swp->burst_counter[current_bank_adjusted] = myrand() % swip->burst_shots;
-														} else {
-															swp->burst_counter[current_bank_adjusted] = 0;
-														}
-													}
-												}
-												swp->next_secondary_fire_stamp[current_bank] = timestamp((int) (t*1000.0f));
-											}
-										//}
-									}
-									swp->next_secondary_fire_stamp[current_bank] = timestamp((int) (t*1000.0f));
-								}
+					//	If ship is protected and very low on hits, don't fire missiles.
+					if ((current_bank > -1) &&  (!(En_objp->flags & OF_PROTECTED) || (En_objp->hull_strength > 10*swip->damage))) {
+						if (aip->ai_flags & AIF_UNLOAD_SECONDARIES) {
+							if (timestamp_until(swp->next_secondary_fire_stamp[current_bank]) > swip->fire_wait*1000.0f) {
+								swp->next_secondary_fire_stamp[current_bank] = timestamp((int) (swip->fire_wait*1000.0f));
 							}
 						}
+
+						if (timestamp_elapsed(swp->next_secondary_fire_stamp[current_bank])) {
+							float firing_range;
+							if (swip->wi_flags2 & WIF2_LOCAL_SSM)
+								firing_range=swip->lssm_lock_range;
+							else
+								firing_range = MIN((swip->max_speed * swip->lifetime), swip->weapon_range);
+							// reduce firing range of secondaries in nebula
+							extern int Nebula_sec_range;
+							if ((The_mission.flags & MISSION_FLAG_FULLNEB) && Nebula_sec_range) {
+								firing_range *= 0.8f;
+							}
+
+							float t = 0.25f;	//	default delay in seconds until next fire.
+
+							if (dist_to_enemy < firing_range*1.0f) {
+
+
+								//vm_vec_scale_add(&future_enemy_pos, enemy_pos, enemy_vel, dist_to_enemy/swip->max_speed);
+								//if (vm_vec_dist_quick(&future_enemy_pos, firing_pos) < firing_range * 0.8f) {
+									if (ai_fire_secondary_weapon(Pl_objp)) {
+										if ((aip->ai_flags & AIF_UNLOAD_SECONDARIES) || (swip->burst_flags & WBF_FAST_FIRING)) {
+											if (swip->burst_shots > swp->burst_counter[current_bank]) {
+												t = swip->burst_delay;
+												swp->burst_counter[current_bank]++;
+											} else {
+												t = swip->fire_wait;
+												if ((swip->burst_shots > 0) && (swip->burst_flags & WBF_RANDOM_LENGTH)) {
+													swp->burst_counter[current_bank] = myrand() % swip->burst_shots;
+												} else {
+ 													swp->burst_counter[current_bank] = 0;
+												}
+											}
+										} else {
+											if (swip->burst_shots > swp->burst_counter[current_bank]) {
+												t = set_secondary_fire_delay(aip, temp_shipp, swip, true);
+												swp->burst_counter[current_bank]++;
+											} else {
+												t = set_secondary_fire_delay(aip, temp_shipp, swip, false);
+												if ((swip->burst_shots > 0) && (swip->burst_flags & WBF_RANDOM_LENGTH)) {
+													swp->burst_counter[current_bank] = myrand() % swip->burst_shots;
+												} else {
+													swp->burst_counter[current_bank] = 0;
+												}
+											}
+										}
+										swp->next_secondary_fire_stamp[current_bank] = timestamp((int) (t*1000.0f));
+									}
+								//}
+							}
+							swp->next_secondary_fire_stamp[current_bank] = timestamp((int) (t*1000.0f));
+						}
 					}
 				}
 			}
@@ -846,6 +811,8 @@ void ai_big_switch_to_chase_mode(ai_info *aip)
 	aip->submode_start_time = Missiontime;
 }

+extern int ai_big_strafe_maybe_retreat(float dist, vec3d *target_pos);
+
 // Make object Pl_objp chase object En_objp, which is a big ship, not a small ship.
 void ai_big_chase()
 {
@@ -854,11 +821,14 @@ void ai_big_chase()
 	ship_info	*sip = &Ship_info[Ships[Pl_objp->instance].ship_info_index];
 	ship			*shipp = &Ships[Pl_objp->instance];	
 	ai_info		*aip = &Ai_info[shipp->ai_index];
+	int			enemy_ship_type;
 	vec3d		predicted_enemy_pos;

 	Assert(aip->mode == AIM_CHASE);

-	maybe_cheat_fire_synaptic(Pl_objp);
+	maybe_cheat_fire_synaptic(Pl_objp, aip);
+
+	enemy_ship_type = Ship_info[Ships[En_objp->instance].ship_info_index].flags;

 	ai_set_positions(Pl_objp, En_objp, aip, &player_pos, &enemy_pos);

@@ -880,20 +850,17 @@ void ai_big_chase()
 	dist_to_enemy = vm_vec_normalized_dir(&vec_to_enemy, &enemy_pos, &player_pos); // - En_objp->radius;
 	dot_to_enemy = vm_vec_dot(&vec_to_enemy, &Pl_objp->orient.vec.fvec);

-	if (aip->ai_flags[AI::AI_Flags::Target_collision]) {
-		if ( ai_big_strafe_maybe_retreat(&enemy_pos) ) {
+	if (aip->ai_flags & AIF_TARGET_COLLISION) {
+		if ( ai_big_strafe_maybe_retreat(dist_to_enemy, &enemy_pos) ) {
 			aip->mode = AIM_STRAFE;
 			aip->submode_parm0 = Missiontime;	// use parm0 as time strafe mode entered (i.e. MODE start time)
 			aip->submode = AIS_STRAFE_AVOID;
 			aip->submode_start_time = Missiontime;
-			if (Pl_objp->phys_info.flags & PF_AFTERBURNER_ON) {
-				afterburners_stop(Pl_objp);
-			}
 			return;
 		}
 	}

-	if (aip->ai_flags[AI::AI_Flags::Kamikaze]) {
+	if (aip->ai_flags & AIF_KAMIKAZE) {
 		//nprintf(("AI", "Kamikaze: %7.3f %7.3f\n", dot_to_enemy, dist_to_enemy));
 		accelerate_ship(aip, 1.0f);
 		if ((dist_to_enemy < 400.0f) && ai_maybe_fire_afterburner(Pl_objp, aip)) {
@@ -903,7 +870,7 @@ void ai_big_chase()
 	}

 	//	If just acquired target, or target is not in reasonable cone, don't refine believed enemy position.
-	if ((dot_to_enemy < 0.25f) || (aip->target_time < 1.0f) || (aip->ai_flags[AI::AI_Flags::Seek_lock])) {
+	if ((dot_to_enemy < 0.25f) || (aip->target_time < 1.0f) || (aip->ai_flags & AIF_SEEK_LOCK)) {
 		update_aspect_lock_information(aip, &vec_to_enemy, dist_to_enemy - En_objp->radius, En_objp->radius);
 	} else if (aip->targeted_subsys != NULL) {		
 		Assert(aip->targeted_subsys != NULL);
@@ -913,10 +880,10 @@ void ai_big_chase()
 		dist_to_enemy = vm_vec_normalized_dir(&vec_to_enemy, &enemy_pos, &player_pos); // - En_objp->radius;
 		dot_to_enemy = vm_vec_dot(&vec_to_enemy, &Pl_objp->orient.vec.fvec);
 		update_aspect_lock_information(aip, &vec_to_enemy, dist_to_enemy, En_objp->radius);
-	} else if (En_objp->flags[Object::Object_Flags::Protected]) {	//	If protected and we're not attacking a subsystem, stop attacking!
+	} else if (En_objp->flags & OF_PROTECTED) {	//	If protected and we're not attacking a subsystem, stop attacking!
 		update_aspect_lock_information(aip, &vec_to_enemy, dist_to_enemy - En_objp->radius, En_objp->radius);
 		aip->target_objnum = -1;
-		if (find_enemy(OBJ_INDEX(Pl_objp), MAX_ENEMY_DISTANCE, The_mission.ai_profile->max_attackers[Game_skill_level]) == -1) {
+		if (find_enemy(Pl_objp-Objects, MAX_ENEMY_DISTANCE, The_mission.ai_profile->max_attackers[Game_skill_level]) == -1) {
 			ai_do_default_behavior(Pl_objp);
 			return;
 		}
@@ -929,12 +896,8 @@ void ai_big_chase()
 	case SM_ATTACK:
 	case SM_SUPER_ATTACK:
 		if (vm_vec_dist_quick(&Pl_objp->pos, &predicted_enemy_pos) > 100.0f + En_objp->radius * 2.0f) {
-			if (maybe_avoid_big_ship(Pl_objp, En_objp, aip, &predicted_enemy_pos, 10.0f)) {
-				if ((Pl_objp->phys_info.flags & PF_AFTERBURNER_ON) && !(aip->ai_flags[AI::AI_Flags::Kamikaze])) {
-					afterburners_stop(Pl_objp);
-				}
+			if (maybe_avoid_big_ship(Pl_objp, En_objp, aip, &predicted_enemy_pos, 10.0f))
 				return;
-			}
 		}

 		if (aip->target_time < 2.0f)
@@ -950,13 +913,6 @@ void ai_big_chase()
 	//
 	//	Set turn and acceleration based on submode.
 	//
-
-	if (((aip->submode != SM_ATTACK) && (aip->submode != SM_SUPER_ATTACK) && (aip->submode != SM_ATTACK_FOREVER) && (aip->submode != SM_EVADE_WEAPON)) || (aip->mode == AIM_STRAFE)){
-		if ((Pl_objp->phys_info.flags & PF_AFTERBURNER_ON) && !(aip->ai_flags[AI::AI_Flags::Kamikaze])) {
-			afterburners_stop(Pl_objp);
-		}
-	}
-
 	switch (aip->submode) {
 	case SM_CONTINUOUS_TURN:
 		ai_big_chase_ct();
@@ -1044,7 +1000,7 @@ void ai_big_chase()
 			if ((dist_normal_to_enemy < ATTACK_COLLIDE_AVOID_DIST + speed_dist) || (time_to_enemy < ATTACK_COLLIDE_AVOID_TIME) ) {
 				// get away, simulate crsh recovery (don't use avoid)
 //				accelerate_ship(aip, -1.0f);
-				big_ship_collide_recover_start(Pl_objp, En_objp, nullptr);
+				big_ship_collide_recover_start(Pl_objp, En_objp, &Pl_objp->pos, NULL);
 //				aip->submode = SM_AVOID;
 //				aip->submode_start_time = Missiontime;
 			} else if ((dist_normal_to_enemy < ATTACK_COLLIDE_SLOW_DIST) || (time_to_enemy < ATTACK_COLLIDE_SLOW_TIME) ) {
@@ -1143,7 +1099,7 @@ void ai_big_chase()
 	//		 TODO: investigate why ships fire (and aren't close to hitting ship) when following a path near
 	//				 a big ship
 	if (aip->mode != AIM_EVADE && aip->path_start == -1 ) {
-		ai_big_maybe_fire_weapons(dist_to_enemy, dot_to_enemy);
+		ai_big_maybe_fire_weapons(dist_to_enemy, dot_to_enemy, &player_pos, &predicted_enemy_pos, &En_objp->phys_info.vel);
 	} else {
 		if (flFrametime < 1.0f)
 			aip->time_enemy_in_range *= (1.0f - flFrametime);
@@ -1152,6 +1108,11 @@ void ai_big_chase()
 	}
 }

+void ai_big_ship(object *objp)
+{
+	// do nothing
+}
+
 // all three parms are output parameters
 //	Enemy object is En_objp
 // pos	=>		world pos of attack point
@@ -1168,7 +1129,7 @@ void ai_big_attack_get_data(vec3d *enemy_pos, float *dist_to_enemy, float *dot_t
 	Assert(aip->mode == AIM_STRAFE);

 	// ensure that Pl_objp is still targeting a big ship
-	if ( !(esip->is_big_or_huge()) ) {
+	if ( !(esip->flags & (SIF_BIG_SHIP | SIF_HUGE_SHIP)) ) {
 		ai_big_switch_to_chase_mode(aip);
 		return;
 	}
@@ -1192,7 +1153,7 @@ void ai_big_attack_get_data(vec3d *enemy_pos, float *dist_to_enemy, float *dot_t
 	//	If just acquired target, or target is not in reasonable cone, don't refine believed enemy position.
 	vm_vec_normalized_dir(&vec_to_enemy, enemy_pos, &player_pos);
 	*dot_to_enemy=vm_vec_dot(&vec_to_enemy, &Pl_objp->orient.vec.fvec);
-	if ((*dot_to_enemy < 0.25f) || (aip->target_time < 1.0f) || (aip->ai_flags[AI::AI_Flags::Seek_lock])) {
+	if ((*dot_to_enemy < 0.25f) || (aip->target_time < 1.0f) || (aip->ai_flags & AIF_SEEK_LOCK)) {
 		predicted_enemy_pos=*enemy_pos;
 	} else {
 		vec3d	gun_pos, pnt;
@@ -1200,13 +1161,12 @@ void ai_big_attack_get_data(vec3d *enemy_pos, float *dist_to_enemy, float *dot_t
 		float		weapon_speed;

 		//	Compute position of gun in absolute space and use that as fire position.
-		if (po->n_guns > 0 && !(The_mission.ai_profile->flags[AI::Profile_Flags::Ai_aims_from_ship_center])) {
+		if (po->n_guns > 0) {
 			pnt = po->gun_banks[0].pnt[0];
 			vm_vec_unrotate(&gun_pos, &pnt, &Pl_objp->orient);
 			vm_vec_add2(&gun_pos, &Pl_objp->pos);
 		} else {
-			//Use the convergence offset, if there is one
-			vm_vec_copy_scale(&pnt, &Ship_info[shipp->ship_info_index].convergence_offset, 1.0f);	
+			gun_pos = Pl_objp->pos;
 		}
 		weapon_speed = ai_get_weapon_speed(&shipp->weapons);
 		
@@ -1222,7 +1182,7 @@ void ai_big_attack_get_data(vec3d *enemy_pos, float *dist_to_enemy, float *dot_t

 // check to see if Pl_objp has gotten too close to attacking point.. if so, break off by entering
 // AIS_STRAFE_RETREAT
-static int ai_big_strafe_maybe_retreat(const vec3d *target_pos)
+int ai_big_strafe_maybe_retreat(float dist, vec3d *target_pos)
 {
 	ai_info	*aip;
 	aip = &Ai_info[Ships[Pl_objp->instance].ai_index];
@@ -1233,7 +1193,7 @@ static int ai_big_strafe_maybe_retreat(const vec3d *target_pos)
 	float dist_to_target, dist_normal_to_target, time_to_target;
 	dist_to_target = vm_vec_mag_quick(&vec_to_target);
 	if (vm_vec_mag_quick(&aip->big_attack_surface_normal) > 0.9) {
-		dist_normal_to_target = -vm_vec_dot(&vec_to_target, &aip->big_attack_surface_normal);
+		dist_normal_to_target = -vm_vec_dotprod(&vec_to_target, &aip->big_attack_surface_normal);
 	} else {
 		dist_normal_to_target = 0.2f * vm_vec_mag_quick(&vec_to_target);
 	}
@@ -1248,19 +1208,20 @@ static int ai_big_strafe_maybe_retreat(const vec3d *target_pos)

 	// Inside 2 sec retreat, setting goal point to box point + 300m
 	// If collision, use std collision resolution.
-	if ( !(aip->ai_flags[AI::AI_Flags::Kamikaze]) && ((aip->ai_flags[AI::AI_Flags::Target_collision]) || (time_to_target < STRAFE_RETREAT_COLLIDE_TIME) || (dist_normal_to_target < STRAFE_RETREAT_COLLIDE_DIST + speed_to_dist_penalty)) ) {
-		if (aip->ai_flags[AI::AI_Flags::Target_collision]) {
+	if ( !(aip->ai_flags & AIF_KAMIKAZE) && ((aip->ai_flags & AIF_TARGET_COLLISION) || (time_to_target < STRAFE_RETREAT_COLLIDE_TIME) || (dist_normal_to_target < STRAFE_RETREAT_COLLIDE_DIST + speed_to_dist_penalty)) ) {
+		if (aip->ai_flags & AIF_TARGET_COLLISION) {
 			// use standard collision resolution
-			aip->ai_flags.remove(AI::AI_Flags::Target_collision);
-			big_ship_collide_recover_start(Pl_objp, En_objp, nullptr);
+			aip->ai_flags &= ~AIF_TARGET_COLLISION;
+			big_ship_collide_recover_start(Pl_objp, En_objp, &Pl_objp->pos, NULL);
 		} else {
 			// too close for comfort so fly to box point + 300
 			aip->submode = AIS_STRAFE_RETREAT1;
 			aip->submode_start_time = Missiontime;

+			float box_dist;
 			int is_inside;
 			vec3d goal_point;
-			get_world_closest_box_point_with_delta(&goal_point, En_objp, &Pl_objp->pos, &is_inside, STRAFE_RETREAT_BOX_DIST);
+			box_dist = get_world_closest_box_point_with_delta(&goal_point, En_objp, &Pl_objp->pos, &is_inside, STRAFE_RETREAT_BOX_DIST);

 			// set goal point
 			aip->goal_point = goal_point;
@@ -1284,6 +1245,7 @@ void ai_big_strafe_attack()
 	vec3d	target_pos;
 	vec3d	rand_vec;
 	float		target_dist, target_dot, accel, t;
+	object	*target_objp;

 	aip = &Ai_info[Ships[Pl_objp->instance].ai_index];

@@ -1292,12 +1254,15 @@ void ai_big_strafe_attack()
 	}

 	ai_big_attack_get_data(&target_pos, &target_dist, &target_dot);
-	if ( ai_big_strafe_maybe_retreat(&target_pos) )
+	if ( ai_big_strafe_maybe_retreat(target_dist, &target_pos) )
 		return;

-	if (aip->ai_flags[AI::AI_Flags::Kamikaze]) {
+	target_objp = &Objects[aip->target_objnum];
+
+	if (aip->ai_flags & AIF_KAMIKAZE) {
 		if (target_dist < 1200.0f) {
-			ai_turn_towards_vector(&target_pos, Pl_objp, Ship_info[Ships[Pl_objp->instance].ship_info_index].srotation_time, nullptr, nullptr, 0.0f, 0);
+			//nprintf(("AI", "Kamikaze: %7.3f %7.3f\n", target_dot, target_dist));
+			ai_turn_towards_vector(&target_pos, Pl_objp, flFrametime, Ship_info[Ships[Pl_objp->instance].ship_info_index].srotation_time, NULL, NULL, 0.0f, 0);
 			accelerate_ship(aip, 1.0f);
 			if ((target_dist < 400.0f) && ai_maybe_fire_afterburner(Pl_objp, aip)) {
 				afterburners_start(Pl_objp);
@@ -1307,7 +1272,7 @@ void ai_big_strafe_attack()
 		}
 	}

-	if (!(aip->ai_flags[AI::AI_Flags::Seek_lock]) || (aip->aspect_locked_time < 2.0f)) {
+	if (!(aip->ai_flags & AIF_SEEK_LOCK) || (aip->aspect_locked_time < 2.0f)) {
 		t  = ai_endangered_by_weapon(aip);
 		if ( t > 0.0f && t < 1.5f ) {
 			// set up goal_point for avoid path to turn towards
@@ -1332,6 +1297,7 @@ void ai_big_strafe_attack()

 			aip->submode = AIS_STRAFE_AVOID;
 			aip->submode_start_time = Missiontime;
+	//		nprintf(("Alan","Ship %s entering AIS_STRAFE_AVOID at frame %d\n", Ships[aip->shipnum].ship_name, Framecount));

 			if (ai_maybe_fire_afterburner(Pl_objp, aip)) {
 				afterburners_start(Pl_objp);
@@ -1341,33 +1307,30 @@ void ai_big_strafe_attack()
 	}

 	// maybe fire weapons at target
-	ai_big_maybe_fire_weapons(target_dist, target_dot);
+	ai_big_maybe_fire_weapons(target_dist, target_dot, &Pl_objp->pos, &En_objp->pos, &En_objp->phys_info.vel);
 	turn_towards_point(Pl_objp, &target_pos, NULL, 0.0f);

+	// Slow down if we've not been hit for a while
 	fix last_hit = Missiontime - aip->last_hit_time;
-	if ( aip->ai_profile_flags[AI::Profile_Flags::Ai_can_slow_down_attacking_big_ships] ) {
-		// Slow down if we've not been hit for a while
-		if ( target_dist > 1200 || last_hit < F1_0*6) {
-			accel = 1.0f;
-		} else {
-			float attack_time;
-			attack_time = f2fl(Missiontime - aip->submode_start_time);
-			if ( attack_time > 15 ) {
-				accel = 0.2f;
-			} else if ( attack_time > 10 ) {
-				accel = 0.4f;
-			} else if ( attack_time > 8 ) {
-				accel = 0.6f;
-			} else if ( attack_time > 5 ) {
-				accel = 0.8f;
-			} else {
-				accel = 1.0f;
-			}
-		}
-	} else {
+	if ( target_dist > 1200 || last_hit < F1_0*6) {
 		accel = 1.0f;
+	} else {
+		float attack_time;
+		attack_time = f2fl(Missiontime - aip->submode_start_time);
+		if ( attack_time > 15 ) {
+			accel = 0.2f;
+		} else if ( attack_time > 10 ) {
+			accel = 0.4f;
+		} else if ( attack_time > 8 ) {
+			accel = 0.6f;
+		} else if ( attack_time > 5 ) {
+			accel = 0.8f;
+		} else {
+			accel = 1.0f;
+		}
 	}

+	accel = 1.0f;
 	accelerate_ship(aip, accel);

 	// if haven't been hit in quite a while, leave strafe mode
@@ -1487,7 +1450,7 @@ void ai_big_strafe_glide_attack()
 		vm_vec_sub2(&target_pos, &En_objp->pos);

 		turn_towards_point(Pl_objp, &target_pos, NULL, 0.0f);
-		ai_big_maybe_fire_weapons(target_dist, target_dot);
+		ai_big_maybe_fire_weapons(target_dist, target_dot, &Pl_objp->pos, &En_objp->pos, &En_objp->phys_info.vel);
 	}

 	// if haven't been hit in quite a while, leave strafe mode
@@ -1511,7 +1474,7 @@ void ai_big_strafe_avoid()
 	mode_time = Missiontime - aip->submode_start_time;

 	ai_big_attack_get_data(&target_pos, &target_dist, &target_dot);
-	if ( ai_big_strafe_maybe_retreat(&target_pos) )
+	if ( ai_big_strafe_maybe_retreat(target_dist, &target_pos) )
 		return;

 	if ( mode_time > fl2f(0.5)) {
@@ -1616,7 +1579,7 @@ void ai_big_strafe_position()
 	aip = &Ai_info[Ships[Pl_objp->instance].ai_index];

 	//Maybe use AIS_STRAFE_GLIDE_ATTACK
-	if ((sip->can_glide == true) && !(aip->ai_flags[AI::AI_Flags::Kamikaze]) && (frand() < aip->ai_glide_strafe_percent)) {
+	if ((sip->can_glide == true) && !(aip->ai_flags & AIF_KAMIKAZE) && (frand() < aip->ai_glide_strafe_percent)) {
 		aip->submode = AIS_STRAFE_GLIDE_ATTACK;
 		aip->submode_parm1 = 0;
 	} else {
@@ -1648,7 +1611,7 @@ void ai_big_strafe()
 	}
 */
 	// check if target is still a big ship... if not enter chase mode
-	if ( !(Ship_info[Ships[En_objp->instance].ship_info_index].is_big_or_huge()) ) {
+	if ( !(Ship_info[Ships[En_objp->instance].ship_info_index].flags & (SIF_BIG_SHIP|SIF_HUGE_SHIP)) ) {
 		ai_big_switch_to_chase_mode(aip);
 		return;
 	}
@@ -1698,7 +1661,7 @@ void ai_big_strafe()
 //
 // Check if weapon_objnum was fired by Pl_objp's target, and whether Pl_objp's target is a big ship, if
 // so, enter AIM_STRAFE
-int ai_big_maybe_enter_strafe_mode(const object *pl_objp, int weapon_objnum)
+int ai_big_maybe_enter_strafe_mode(object *pl_objp, int weapon_objnum, int consider_target_only)
 {
 	ai_info		*aip;
 	ship_info	*sip;
@@ -1721,12 +1684,12 @@ int ai_big_maybe_enter_strafe_mode(const object *pl_objp, int weapon_objnum)

 	// if Pl_objp's target is not a big/capital ship, then cannot enter strafe mode
 	// AL 12-31-97: Even though transports are considered big ships, don't enter strafe mode on them
-	if ( !(sip->is_big_or_huge()) || (sip->flags[Ship::Info_Flags::Transport]) ) {
+	if ( !(sip->flags & (SIF_BIG_SHIP | SIF_HUGE_SHIP)) || (sip->flags & SIF_TRANSPORT) ) {
 		return 0;
 	}

 	//	If Pl_objp not a fighter or bomber, don't enter strafe mode. -- MK, 11/11/97.
-	if ( !(Ship_info[Ships[pl_objp->instance].ship_info_index].is_fighter_bomber()) ) {
+	if ( !(Ship_info[Ships[pl_objp->instance].ship_info_index].flags & (SIF_FIGHTER | SIF_BOMBER)) ) {
 		return 0;
 	}

@@ -1748,7 +1711,7 @@ int ai_big_maybe_enter_strafe_mode(const object *pl_objp, int weapon_objnum)
 //JAS IMPOSSIBLE		} else {
 			// switch targets
 			sip = &Ship_info[Ships[parent_objp->instance].ship_info_index];
-			if ( !(sip->is_big_or_huge()) || (sip->flags[Ship::Info_Flags::Transport]) ) {
+			if ( !(sip->flags & (SIF_BIG_SHIP | SIF_HUGE_SHIP)) || (sip->flags & SIF_TRANSPORT) ) {
 				return 0;
 			}
 			set_target_objnum(aip, OBJ_INDEX(parent_objp));
@@ -1772,7 +1735,7 @@ int ai_big_maybe_enter_strafe_mode(const object *pl_objp, int weapon_objnum)
 // Consider attacking a turret, if a turret actually fired the weapon
 // input:	ship_objp	=>	ship that will attack the turret
 //				weapon_objp	=>	
-void ai_big_strafe_maybe_attack_turret(const object *ship_objp, const object *weapon_objp)
+void ai_big_strafe_maybe_attack_turret(object *ship_objp, object *weapon_objp)
 {
 	ai_info	*aip;
 	object	*parent_objp;
@@ -1803,8 +1766,8 @@ void ai_big_strafe_maybe_attack_turret(const object *ship_objp, const object *we
 	// the ai will not always go after different ships firing beams at them.
 	// Approx 1/4 chance we'll go after the other ship's beam.

-	bool attack_turret_on_different_ship = (aip->ai_profile_flags[AI::Profile_Flags::Big_ships_can_attack_beam_turrets_on_untargeted_ships])
-		&& (Weapon_info[Weapons[weapon_objp->instance].weapon_info_index].wi_flags[Weapon::Info_Flags::Beam]) && (frand()*100 < 25.0f);
+	bool attack_turret_on_different_ship = (aip->ai_profile_flags & AIPF_BIG_SHIPS_CAN_ATTACK_BEAM_TURRETS_ON_UNTARGETED_SHIPS)
+		&& (Weapon_info[weapon_objp->instance].wi_flags & WIF_BEAM) && (frand()*100 < 25.0f);

 	// unless we're making an exception, we should only attack a turret if it sits on the current target
 	if ( !attack_turret_on_different_ship )
@@ -12,18 +12,19 @@
 #ifndef __AIBIG_H__
 #define __AIBIG_H__

-class object;
+struct object;
 struct ai_info;
 struct vec3d;
-class ship_subsys;
+struct ship_subsys;

+void	ai_big_ship(object *objp);
 void	ai_big_chase();
 void	ai_big_subsys_path_cleanup(ai_info *aip);

 // strafe functions
 void	ai_big_strafe();
-int	ai_big_maybe_enter_strafe_mode(const object *objp, int weapon_objnum);
-void	ai_big_strafe_maybe_attack_turret(const object *ship_objp, const object *weapon_objp);
+int	ai_big_maybe_enter_strafe_mode(object *objp, int weapon_objnum, int consider_target_only=0);
+void	ai_big_strafe_maybe_attack_turret(object *ship_objp, object *weapon_objp);
 void ai_big_pick_attack_point(object *objp, object *attacker_objp, vec3d *attack_point, float fov=1.0f);
 void ai_big_pick_attack_point_turret(object *objp, ship_subsys *ssp, vec3d *gpos, vec3d *gvec, vec3d *attack_point, float weapon_travel_dist, float fov=1.0f);

@@ -26,7 +26,6 @@ struct ai_goal;
 // Fred.  If the goal you add doesn't have a target (such as chase_any), then you don't have
 // to worry about doing this.  Also add it to list in Fred\Management.cpp, and let Hoffoss know!
 // WMC - Oh and add them to Ai_goal_names plz. TY! :)
-// Goober5000 - As well as Ai_goal_text and Ai_goal_list, if appropriate
 #define AI_GOAL_CHASE					(1<<1)	// 0x00000002
 #define AI_GOAL_DOCK					(1<<2)	// 0x00000004	// used for undocking as well
 #define AI_GOAL_WAYPOINTS				(1<<3)	// 0x00000008
@@ -52,23 +51,20 @@ struct ai_goal;
 // resume regular goals
 #define AI_GOAL_STAY_STILL				(1<<20)	// 0x00100000
 #define AI_GOAL_PLAY_DEAD				(1<<21)	// 0x00200000
-
-// added by SCP
 #define AI_GOAL_CHASE_WEAPON			(1<<22)	// 0x00400000
+
 #define AI_GOAL_FLY_TO_SHIP				(1<<23) // 0x00800000
 #define AI_GOAL_IGNORE_NEW				(1<<24)	// 0x01000000
-#define AI_GOAL_CHASE_SHIP_CLASS		(1<<25)	// 0x02000000
-#define AI_GOAL_PLAY_DEAD_PERSISTENT	(1<<26)	// 0x03000000

 // now the masks for ship types

 // Goober5000: added AI_GOAL_STAY_NEAR_SHIP and AI_GOAL_KEEP_SAFE_DISTANCE as valid for fighters
 //WMC - Don't need these anymore. Whee!
 /*
-#define AI_GOAL_ACCEPT_FIGHTER		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_CHASE | AI_GOAL_WAYPOINTS | AI_GOAL_WAYPOINTS_ONCE | AI_GOAL_WARP | AI_GOAL_DESTROY_SUBSYSTEM | AI_GOAL_CHASE_WING | AI_GOAL_GUARD | AI_GOAL_DISABLE_SHIP | AI_GOAL_DISARM_SHIP | AI_GOAL_CHASE_ANY | AI_GOAL_IGNORE | AI_GOAL_IGNORE_NEW | AI_GOAL_GUARD_WING | AI_GOAL_EVADE_SHIP | AI_GOAL_STAY_STILL | AI_GOAL_PLAY_DEAD | AI_GOAL_PLAY_DEAD_PERSISTENT | AI_GOAL_STAY_NEAR_SHIP | AI_GOAL_KEEP_SAFE_DISTANCE )
+#define AI_GOAL_ACCEPT_FIGHTER		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_CHASE | AI_GOAL_WAYPOINTS | AI_GOAL_WAYPOINTS_ONCE | AI_GOAL_WARP | AI_GOAL_DESTROY_SUBSYSTEM | AI_GOAL_CHASE_WING | AI_GOAL_GUARD | AI_GOAL_DISABLE_SHIP | AI_GOAL_DISARM_SHIP | AI_GOAL_CHASE_ANY | AI_GOAL_IGNORE | AI_GOAL_IGNORE_NEW | AI_GOAL_GUARD_WING | AI_GOAL_EVADE_SHIP | AI_GOAL_STAY_STILL | AI_GOAL_PLAY_DEAD | AI_GOAL_STAY_NEAR_SHIP | AI_GOAL_KEEP_SAFE_DISTANCE )
 #define AI_GOAL_ACCEPT_BOMBER			( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_FIGHTER | AI_GOAL_STAY_NEAR_SHIP )
 #define AI_GOAL_ACCEPT_STEALTH		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_FIGHTER | AI_GOAL_STAY_NEAR_SHIP )
-#define AI_GOAL_ACCEPT_TRANSPORT		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_CHASE | AI_GOAL_CHASE_WING | AI_GOAL_DOCK | AI_GOAL_WAYPOINTS | AI_GOAL_WAYPOINTS_ONCE | AI_GOAL_WARP | AI_GOAL_UNDOCK | AI_GOAL_STAY_STILL | AI_GOAL_PLAY_DEAD | AI_GOAL_PLAY_DEAD_PERSISTENT | AI_GOAL_STAY_NEAR_SHIP )
+#define AI_GOAL_ACCEPT_TRANSPORT		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_CHASE | AI_GOAL_CHASE_WING | AI_GOAL_DOCK | AI_GOAL_WAYPOINTS | AI_GOAL_WAYPOINTS_ONCE | AI_GOAL_WARP | AI_GOAL_UNDOCK | AI_GOAL_STAY_STILL | AI_GOAL_PLAY_DEAD| AI_GOAL_STAY_NEAR_SHIP )
 #define AI_GOAL_ACCEPT_FREIGHTER		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_TRANSPORT | AI_GOAL_STAY_NEAR_SHIP )
 #define AI_GOAL_ACCEPT_CRUISER		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_FREIGHTER | AI_GOAL_STAY_NEAR_SHIP )
 #define AI_GOAL_ACCEPT_CORVETTE		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_CRUISER | AI_GOAL_STAY_NEAR_SHIP )
@@ -76,7 +72,7 @@ struct ai_goal;
 #define AI_GOAL_ACCEPT_AWACS			( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_CRUISER | AI_GOAL_STAY_NEAR_SHIP )
 #define AI_GOAL_ACCEPT_CAPITAL		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_CRUISER & ~(AI_GOAL_DOCK | AI_GOAL_UNDOCK) | AI_GOAL_STAY_NEAR_SHIP )
 #define AI_GOAL_ACCEPT_SUPERCAP		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_CAPITAL | AI_GOAL_STAY_NEAR_SHIP )
-#define AI_GOAL_ACCEPT_SUPPORT		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_DOCK | AI_GOAL_UNDOCK | AI_GOAL_WAYPOINTS | AI_GOAL_WAYPOINTS_ONCE | AI_GOAL_STAY_NEAR_SHIP | AI_GOAL_KEEP_SAFE_DISTANCE | AI_GOAL_STAY_STILL | AI_GOAL_PLAY_DEAD | AI_GOAL_PLAY_DEAD_PERSISTENT )
+#define AI_GOAL_ACCEPT_SUPPORT		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_DOCK | AI_GOAL_UNDOCK | AI_GOAL_WAYPOINTS | AI_GOAL_WAYPOINTS_ONCE | AI_GOAL_STAY_NEAR_SHIP | AI_GOAL_KEEP_SAFE_DISTANCE | AI_GOAL_STAY_STILL | AI_GOAL_PLAY_DEAD)
 #define AI_GOAL_ACCEPT_ESCAPEPOD		( AI_GOAL_FLY_TO_SHIP | AI_GOAL_ACCEPT_TRANSPORT| AI_GOAL_STAY_NEAR_SHIP  )
 */

@@ -90,7 +86,7 @@ extern int Num_ai_goals;
 extern int Num_ai_dock_names;
 extern char Ai_dock_names[MAX_AI_DOCK_NAMES][NAME_LENGTH];

-extern const char *Ai_goal_text(int goal);
+extern char *Ai_goal_text(int goal);

 // extern function definitions
 extern void ai_post_process_mission();
@@ -103,7 +99,7 @@ extern int ai_goal_num(ai_goal *goals);
 extern void ai_add_ship_goal_scripting(int mode, int submode, int priority, char *shipname, ai_info *aip);
 extern void ai_add_ship_goal_sexp( int sexp, int type, ai_info *aip );
 extern void ai_add_wing_goal_sexp( int sexp, int type, int wingnum );
-extern void ai_add_goal_sub_sexp( int sexp, int type, ai_goal *aigp, char *actor_name );
+extern void ai_add_goal_sub_sexp( int sexp, int type, ai_goal *aigp );

 extern int ai_remove_goal_sexp_sub( int sexp, ai_goal* aigp );
 extern void ai_remove_wing_goal_sexp(int sexp, int wingnum);
@@ -121,12 +117,13 @@ extern void ai_copy_mission_wing_goal( ai_goal *aigp, ai_info *aip );
 extern void ai_mission_goal_complete( ai_info *aip );
 extern void ai_mission_wing_goal_complete( int wingnum, ai_goal *remove_goalp );

-extern void ai_update_goal_references(ai_goal *goals, int type, const char *old_name, const char *new_name);
-extern int query_referenced_in_ai_goals(ai_goal *goals, int type, const char *name);
-extern char *ai_add_dock_name(const char *str);
+extern void ai_update_goal_references(ai_goal *goals, int type, char *old_name, char *new_name);
+extern int query_referenced_in_ai_goals(ai_goal *goals, int type, char *name);
+extern char *ai_add_dock_name(char *str);

-extern int ai_query_goal_valid( int ship, int ai_goal_type );
+extern int ai_query_goal_valid( int ship, int ai_goal );

 extern void ai_add_goal_ship_internal( ai_info *aip, int goal_type, char *name, int docker_point, int dockee_point, int immediate = 1 );
+extern void ai_add_goal_wing_internal( wing *wingp, int goal_type, char *name, int immediate = 1 );

 #endif
@@ -10,9 +10,6 @@
 #ifndef _AIINTERNAL_H
 #define _AIINTERNAL_H

-#include "ship/ship.h"
-#include "weapon/weapon.h"
-
 //Returns true if the specified object is a stealth ship, false if not
 bool is_object_stealth_ship(object* objp);

@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) Volition, Inc. 1999.  All rights reserved.
+ *
+ * All source code herein is the property of Volition, Inc. You may not sell 
+ * or otherwise commercially exploit the source or things you created based on the 
+ * source.
+ *
+*/
+
+#ifndef _AILOCAL_H
+#define _AILOCAL_H
+
+// -- Don't put anything in here --
+// Put it in ai.h!
+
+#endif
@@ -10,17 +10,17 @@


 #include "anim/animplay.h"
-#include "anim/packunpack.h"
+#include "globalincs/linklist.h"
+#include "io/timer.h"
 #include "bmpman/bmpman.h"
+#include "graphics/2d.h"
+#include "render/3d.h"
+#include "pcxutils/pcxutils.h"
+#include "anim/packunpack.h"
 #include "cfile/cfile.h"
 #include "cmdline/cmdline.h"
-#include "globalincs/linklist.h"
-#include "graphics/2d.h"
-#include "io/timer.h"
-#include "pcxutils/pcxutils.h"
-#include "render/3d.h"
-#include "graphics/material.h"
-#include "tracing/Monitor.h"
+
+

 static color Color_xparent;

@@ -31,17 +31,16 @@ anim_instance anim_render_list;
 #define MAX_ANIM_INSTANCES 25
 anim_instance anim_render_instance[MAX_ANIM_INSTANCES];

-int Anim_paused;	/// Global variable to pause the playing back of anims
+int Anim_paused;	// global variable to pause the playing back of anims
 int Anim_inited = FALSE;

 fix t1,t2;

 int Anim_ignore_frametime=0;	// flag used to ignore frametime... useful when need to avoid saturated frametimes

-/**
- * @brief Initialise animation
- * @details Queue all the ::anim_render_instance[] elements onto the ::anim_free_list
- */
+// -------------------------------------------------------------------------------------------------
+// anim_init() will queue all the anim_render_instance[] elements onto the anim_free_list
+//
 void anim_init()
 {
 	int i;
@@ -61,9 +60,9 @@ void anim_init()
 	Anim_inited = TRUE;
 }

-/**
- * @brief Display the frames for the currently playing anims
- */
+// -------------------------------------------------------------------------------------------------
+// anim_render_all() will display the frames for the currently playing anims
+//
 void anim_render_all(int screen_id, float frametime)
 {
 	anim_instance* A;
@@ -86,10 +85,10 @@ void anim_render_all(int screen_id, float frametime)
 	}
 }

-/**
- * @brief Display the frames for the passed animation
- * @details It will ignore animations which do not have the same id as the passed screen_id
- */
+// -------------------------------------------------------------------------------------------------
+// anim_render_one() will display the frames for the passed animation, it will ignore animations which
+// do not have the same id as the passed screen_id
+//
 void anim_render_one(int screen_id, anim_instance *ani, float frametime)
 {
 	// make sure this guy's screen id matches the passed one
@@ -110,17 +109,14 @@ void anim_render_one(int screen_id, anim_instance *ani, float frametime)

 MONITOR(NumANIPlayed)

-/**
- * @brief Setup an anim_play_struct for passing into ::anim_play().  
- * @details Will fill in default values, which you can then change before calling ::anim_play().
- */
-void anim_play_init(anim_play_struct *aps, anim *a_info, int x, int y, int base_w, int base_h)
+// Setup an anim_play_struct for passing into anim_play().  Will fill in default values, which you
+// can then change before calling anim_play().
+//
+void anim_play_init(anim_play_struct *aps, anim *a_info, int x, int y)
 {
 	aps->anim_info = a_info;
 	aps->x = x;
 	aps->y = y;
-	aps->base_w = base_w;
-	aps->base_h = base_h;
 	aps->start_at = 0;
 	aps->stop_at = a_info->total_frames - 1;
 	aps->screen_id = 0;
@@ -133,21 +129,49 @@ void anim_play_init(anim_play_struct *aps, anim *a_info, int x, int y, int base_
 	aps->ping_pong = 0;
 }

-/**
- * @brief Will add an anim instance to the anim_render_list.  
- * This will cause the anim to be played at the x,y position specified in the parameter list.
- *
- * @param aps Compressed animation that we should make an instance from
- * @return If success pointer to instance, NULL if anim anim could not be played
- */
+// -------------------------------------------------------------------------------------------------
+// anim_play() will add an anim instance to the anim_render_list.  This will cause the
+// anim to be played at the x,y position specified in the parameter list.
+//
+// input:
+//
+//		anim_info	=>	the compressed animation that we should make an instance from
+//		x				=>	x position of animation to play at (top left corner)
+//		y				=>	y position of animation to play at ( top left corner)
+//		start_at		=>	frame number to start at (note: numbering is from 0->num_frames-1)
+//		stop_at		=>	frame number to stop at (note: numbering is from 0->num_frames-1)
+//		screen_id	=>	OPTIONAL (default value 0): screen signature so animation only plays when
+//							anim_render_all() called with that same signature
+//		world_pos	=>	OPTIONAL (default value NULL): only give a world pos when you want to
+//							play the animation at a 3D location.  You must specify radius when
+//							this is non-null.
+//		radius		=>	OPTIONAL (default value 0): only needed when the animation is playing
+//							as a 3D animation (this is only when world_pos in not NULL).
+//		fi				=>	OPTIONAL (default value 0): framerate indepentdent flag, when set TRUE
+//							the animation will skip frames if necessary to maintain the fps value
+//							associated with the animation
+//		color			=>	OPTIONAL (default value NULL) address of an alpha color struct.  Only
+//							required when the animation should be drawn with an alpha color.
+//		skip_frames	=> OPTIONAL (default value 1) should anim skip frames when doing framerate
+//                   independent playback
+//		looped		=>	OPTIONAL (default value 0) should anim play looped (ie forever)
+//
+// returns:
+//
+//		pointer to instance	=> success
+//		NULL						=> if anim anim could not be played
+//
 anim_instance *anim_play(anim_play_struct *aps)
 {
 	Assert( aps->anim_info != NULL );
 	Assert( aps->start_at >= 0 );
 	Assert( aps->stop_at < aps->anim_info->total_frames );
+	// Assert( aps->stop_at >= aps->start_at );
 	Assert( !(aps->looped && aps->ping_pong) );  // shouldn't have these both set at once

 	MONITOR_INC(NumANIPlayed, 1);
+	
+	// if (aps->ping_pong && !(aps->anim_info->flags & ANF_ALL_KEYFRAMES));

 	anim_instance *instance;

@@ -195,14 +219,6 @@ anim_instance *anim_play(anim_play_struct *aps)
 		instance->xlate_pal = 0;
 	}

-	if(aps->base_w < 0 || aps->base_h < 0) {
-		instance->base_w = gr_screen.max_w_unscaled_zoomed;
-		instance->base_h = gr_screen.max_h_unscaled_zoomed;
-	} else {
-		instance->base_w = aps->base_w;
-		instance->base_h = aps->base_h;
-	}
-
 	// determining the start_at frame is more complicated, since it must be a key-frame.
 	// Futhermore, need to subtract 1 from key-frame number, since frame number is always
 	// incremented the first time anim_show_next_frame() is called
@@ -227,6 +243,16 @@ anim_instance *anim_play(anim_play_struct *aps)

 			idx++;
 		}
+		/*while (keyp) {
+			if (( (keyp->frame_num-1) <= frame_num) && ( (keyp->frame_num-1) > key)) {  // find closest key
+				key = keyp->frame_num-1;
+				offset = keyp->offset;
+				if ( key == frame_num )
+					break;
+			}
+
+			keyp = keyp->next;
+		}*/

 		if (key > instance->frame_num) {  // best key is closer than current position
 			instance->frame_num = key;
@@ -244,17 +270,20 @@ anim_instance *anim_play(anim_play_struct *aps)
 	return instance;
 }

-/**
- * @brief This function is called to blit the next frame of an anim instance to the screen.
- * This is normally called by the anim_render_all() function.
- *
- * @param instance Pointer to animation instance
- * @param frametime	Time elapsed since last call, in seconds
- */
+// -----------------------------------------------------------------------------
+//	anim_show_next_frame()
+//
+//	This function is called to blit the next frame of an anim instance to the 
+// screen.  This is normally called by the anim_render_all() function.
+//
+//	input:	instance		=>		pointer to animation instance
+//				frametime	=>		time elapsed since last call, in seconds
+//
+
 int anim_show_next_frame(anim_instance *instance, float frametime)
 {
-	int	bitmap_id, bitmap_flags=0, new_frame_num, frame_diff=0, i, n_frames=0,frame_save;
-	float percent_through, time;
+	int		bitmap_id, bitmap_flags=0, new_frame_num, frame_diff=0, i, n_frames=0,frame_save;
+	float		percent_through, decompress_time, render_time, time;
 	vertex	image_vertex;
 	int aabitmap = 0;
 	int bpp = 16;
@@ -274,9 +303,9 @@ int anim_show_next_frame(anim_instance *instance, float frametime)
 	percent_through = instance->time_elapsed / time;

 	if(instance->direction == ANIM_DIRECT_FORWARD)
-		new_frame_num = instance->start_at - 1 + (int) lround(percent_through * n_frames);
+		new_frame_num = instance->start_at - 1 + fl2i(percent_through * n_frames + 0.5f);
 	else
-		new_frame_num = instance->start_at - 1 - (int) lround(percent_through * n_frames);
+		new_frame_num = instance->start_at - 1 - fl2i(percent_through * n_frames + 0.5f);

 	frame_save = instance->frame_num;

@@ -336,6 +365,7 @@ int anim_show_next_frame(anim_instance *instance, float frametime)
 				instance->time_elapsed = 0.0f;
 			} else if(instance->ping_pong) {							// pingponged animations
 				instance->frame_num = instance->stop_at;
+				// instance->time_elapsed = 0.0f;
 				anim_reverse_direction(instance);
 			} else {															// one-shot animations
 				instance->frame_num = instance->stop_at;
@@ -350,6 +380,7 @@ int anim_show_next_frame(anim_instance *instance, float frametime)
 				instance->time_elapsed = 0.0f;
 			} else if(instance->ping_pong) {							// pingponged animations
 				instance->frame_num = instance->stop_at;
+				// instance->time_elapsed = 0.0f;
 				anim_reverse_direction(instance);
 			} else {															// one-shot animations
 				instance->frame_num = instance->stop_at+1;
@@ -373,6 +404,7 @@ int anim_show_next_frame(anim_instance *instance, float frametime)
 		}
 	}		
 	Assert(frame_diff >= 0);
+	//	nprintf(("Alan","FRAME DIFF: %d\n",frame_diff));
 	Assert( instance->frame_num >= 0 && instance->frame_num < instance->parent->total_frames );

 	// if the anim is paused, ignore all the above changes and still display this frame
@@ -383,6 +415,7 @@ int anim_show_next_frame(anim_instance *instance, float frametime)
 	}

 	if (instance->parent->flags & ANF_XPARENT){
+		// bitmap_flags = BMP_XPARENT;
 		bitmap_flags = 0;
 	} 
 	bpp = 16;
@@ -461,6 +494,8 @@ int anim_show_next_frame(anim_instance *instance, float frametime)
 		instance->file_offset = instance->parent->file_offset;
 		instance->loop_count++;
 	}
+		
+	decompress_time = f2fl(t2-t1);

 	t1 = timer_get_fixed_seconds();
 	if ( frame_diff == 0 && instance->last_bitmap != -1 ) {
@@ -470,7 +505,7 @@ int anim_show_next_frame(anim_instance *instance, float frametime)
 		if ( instance->last_bitmap != -1 ){
 			bm_release(instance->last_bitmap);
 		}
-		bitmap_id = bm_create(bpp, instance->parent->width, instance->parent->height, instance->frame, bitmap_flags);
+		bitmap_id = bm_create(16, instance->parent->width, instance->parent->height, instance->frame, bitmap_flags);
 	}
 	
 	if ( bitmap_id == -1 ) {
@@ -486,45 +521,55 @@ int anim_show_next_frame(anim_instance *instance, float frametime)
 		
 		// determine x,y to display the bitmap at
 		if ( instance->world_pos == NULL ) {
-			int old_max_w_unscaled = gr_screen.max_w_unscaled;
-			int old_max_h_unscaled = gr_screen.max_h_unscaled;
-			int old_max_w_unscaled_zoomed = gr_screen.max_w_unscaled_zoomed;
-			int old_max_h_unscaled_zoomed = gr_screen.max_h_unscaled_zoomed;
-			gr_set_screen_scale(instance->base_w, instance->base_h);
-			gr_set_clip(0, 0, instance->base_w, instance->base_h, GR_RESIZE_MENU);
 			if ( instance->aa_color == NULL ) {
-				gr_bitmap(instance->x, instance->y, GR_RESIZE_MENU_NO_OFFSET);
+				gr_bitmap(instance->x, instance->y);
 			}
 			else {
 				gr_set_color_fast( (color*)instance->aa_color );
-				gr_aabitmap(instance->x, instance->y, GR_RESIZE_MENU_NO_OFFSET);
+				gr_aabitmap(instance->x, instance->y);
 			}
-			gr_set_screen_scale(old_max_w_unscaled, old_max_h_unscaled, old_max_w_unscaled_zoomed, old_max_h_unscaled_zoomed);
-			gr_reset_clip();
 		}
 		else {
 			g3_rotate_vertex(&image_vertex,instance->world_pos);
 			Assert(instance->radius != 0.0f);
-			//g3_draw_bitmap(&image_vertex, 0, instance->radius*1.5f, TMAP_FLAG_TEXTURED | TMAP_HTL_2D);
-			material mat_params;
-			material_set_unlit(&mat_params, bitmap_id, 1.0f, false, false);
-			g3_render_rect_screen_aligned_2d(&mat_params, &image_vertex, 0, instance->radius*1.5f);
+			g3_draw_bitmap(&image_vertex, 0, instance->radius*1.5f, TMAP_FLAG_TEXTURED | TMAP_HTL_2D);
 		}
 									  
+		//bm_release(bitmap_id);
 		instance->last_bitmap = bitmap_id;
 	}

 	t2 = timer_get_fixed_seconds();
+	render_time = f2fl(t2-t1);
+
+//	nprintf(("Alan","DECOMPRESS: %.3fms  RENDER: %.3fms\n", decompress_time*1000, render_time*1000));

 	return 0;
 }

-/**
- * @brief Free a particular animation instance that is on the anim_render_list.  
- * Do not call this function to free an animation instance in general (use 
- * free_anim_instance() for that), only when you want to free an instance
- * that is on the anim_render_list
- */
+// -----------------------------------------------------------------------------
+//	anim_stop_playing()
+//
+//	Stop an anim instance that is on the anim_render_list from playing
+//
+int anim_stop_playing(anim_instance* instance)
+{
+	Assert(instance != NULL);
+
+	if ( anim_playing(instance) ) {
+		anim_release_render_instance(instance);
+	}
+	return 0;
+}
+
+// -----------------------------------------------------------------------------
+//	anim_release_render_instance()
+//
+//	Free a particular animation instance that is on the anim_render_list.  Do
+// not call this function to free an animation instance in general (use 
+// free_anim_instance() for that), only when you want to free an instance
+// that is on the anim_render_list
+//
 void anim_release_render_instance(anim_instance* instance)
 {
 	Assert( instance != NULL );
@@ -547,13 +592,16 @@ void anim_release_render_instance(anim_instance* instance)
 	list_append( &anim_free_list, instance );
 }

-/**
- * @brief Free all anim instances that are on the anim_render_list.
- *
- * @param screen_id	Optional parameter that lets you only free a subset of the anim instances.	
- * A screen_id of 0 is the default value, and this is used for animations that always play when 
- * they are placed on the aim_render_list.
- */
+// -----------------------------------------------------------------------------
+//	anim_release_all_instances()
+//
+//	Free all anim instances that are on the anim_render_list.
+//
+//	input:	screen_id	=>		optional parameter that lets you only free a subset
+//										of the anim instances.	A screen_id of 0 is the default
+//										value, and this is used for animations that always play
+//										when they are placed on the aim_render_list.
+//
 void anim_release_all_instances(int screen_id)
 {
 	anim_instance* A;
@@ -577,18 +625,18 @@ void anim_release_all_instances(int screen_id)
 //
 // Read the header of a .ani file.  Below is the format of a .ani header
 //
-//	#bytes		|	description
+//	#bytes	|	description
 //	2			|	obsolete, kept for compatibility with old versions
 //	2			|	version number
 //	2			|	fps
 //	1			|	transparent red value
-//  1			|	transparent green value
+// 1			|	transparent green value
 //	1			|	transparent blue value
 //	2			|	width
 //	2			|	height
 //	2			|	number of frames
 //	1			|	packer code
-//	763			|	palette
+//	763		|	palette
 //	2			|	number of key frames
 //	2			|	key frame number	}		repeats
 //	4			|	key frame offset	}		repeats
@@ -598,7 +646,7 @@ void anim_read_header(anim *ptr, CFILE *fp)
 {
 	ptr->width = cfread_short(fp);
 	// If first 2 bytes are zero, this means we are using a new format, which includes
-	// a version, and fps values. This is only done since a version number was not included
+	// a version, and fps values.  This is only done since a version number was not included
 	// in the original header.

 	// default
@@ -663,25 +711,28 @@ void anim_read_header(anim *ptr, CFILE *fp)
 	}
 }

-/**
- * @brief Load an animation.  This stores the compressed data, which instances of the animation can reference.  
- * Must be free'ed later with anim_free().
- * 
- * @param real_filename Filename of animation
- * @param cf_dir_type 
- * @param file_mapped Whether to use memory-mapped file or not.
- * 
- * @details Memory-mapped files will page in the animation from disk as it is needed, but performance is not as good.
- * @return Pointer to anim that is loaded if sucess, NULL if failure.
- */
-anim *anim_load(const char *real_filename, int cf_dir_type, int file_mapped)
+// -----------------------------------------------------------------------------
+//	anim_load()
+//
+// Load an animation.  This stores the compressed data, which instances
+// of the animation can reference.  Must be free'ed later with anim_free()
+//
+// input:	name				=>		filename of animation
+//				file_mapped		=>		boolean, whether to use memory-mapped file or not.
+//											Memory-mapped files will page in the animation from disk
+//											as it is needed, but performance is not as good
+//
+//	returns:	pointer to anim that is loaded	=> sucess
+//				NULL										=>	failure
+//
+anim *anim_load(char *real_filename, int cf_dir_type, int file_mapped)
 {
 	anim			*ptr;
 	CFILE			*fp;
 	int			count,idx;
 	char name[_MAX_PATH];

-	Assert( real_filename != NULL );
+	Assert ( real_filename != NULL );

 	strcpy_s( name, real_filename );
 	char *p = strchr( name, '.' );
@@ -720,10 +771,6 @@ anim *anim_load(const char *real_filename, int cf_dir_type, int file_mapped)

 		anim_read_header(ptr, fp);

-		if (ptr->width < 0 || ptr->height < 0) {
-			Error(LOCATION, "Ani file %s has a faulty header and cannot be loaded.", name);
-		}
-
 		if(ptr->num_keys > 0){
 			ptr->keys = (key_frame*)vm_malloc(sizeof(key_frame) * ptr->num_keys);
 			Assert(ptr->keys != NULL);
@@ -736,10 +783,22 @@ anim *anim_load(const char *real_filename, int cf_dir_type, int file_mapped)
 			ptr->keys[idx].frame_num = 0;
 			cfread(&ptr->keys[idx].frame_num, 2, 1, fp);
 			cfread(&ptr->keys[idx].offset, 4, 1, fp);
-			ptr->keys[idx].frame_num = INTEL_INT( ptr->keys[idx].frame_num ); //-V570
-			ptr->keys[idx].offset = INTEL_INT( ptr->keys[idx].offset ); //-V570
+			ptr->keys[idx].frame_num = INTEL_INT( ptr->keys[idx].frame_num );
+			ptr->keys[idx].offset = INTEL_INT( ptr->keys[idx].offset );
 		}

+		/*prev_keyp = &ptr->keys;
+		count = ptr->num_keys;
+		while (count--) {
+			keyp = (key_frame *) vm_malloc(sizeof(key_frame));
+			keyp->next = *prev_keyp;
+			*prev_keyp = keyp;
+			prev_keyp = &keyp->next;
+
+			keyp->frame_num = 0;
+			cfread(&keyp->frame_num, 2, 1, fp);
+			cfread(&keyp->offset, 4, 1, fp);
+		}*/
 		cfread(&count, 4, 1, fp);	// size of compressed data
 		count = INTEL_INT( count );

@@ -752,7 +811,7 @@ anim *anim_load(const char *real_filename, int cf_dir_type, int file_mapped)
 		}

 		// couldn't memory-map file... must be in a packfile, so stream manually
-		if ( file_mapped == PAGE_FROM_MEM && !ptr->cfile_ptr ) {
+		if ( file_mapped && !ptr->cfile_ptr ) {
 			ptr->flags &= ~ANF_MEM_MAPPED;
 			ptr->flags |= ANF_STREAMED;
 			ptr->cfile_ptr = cfopen(name, "rb", CFILE_NORMAL, cf_dir_type);
@@ -800,10 +859,12 @@ anim *anim_load(const char *real_filename, int cf_dir_type, int file_mapped)
 	return ptr;
 }

-/**
- * @brief Free an animation that was loaded with anim_load().  
- * @details All instances referencing this animation must be free'ed or get an assert.
- */
+// ---------------------------------------------------
+//	anim_free()
+//
+// Free an animation that was loaded with anim_load().  All instances
+// referencing this animation must be free'ed or get an assert.
+//
 int anim_free(anim *ptr)
 {
 	Assert ( ptr != NULL );
@@ -835,14 +896,14 @@ int anim_free(anim *ptr)

 	if ( ptr->flags & (ANF_MEM_MAPPED|ANF_STREAMED) ) {
 		cfclose(ptr->cfile_ptr);
-		if (ptr->cache != NULL) {
+		if ( ptr->cache ) {
 			vm_free(ptr->cache);
 			ptr->cache = NULL;
 		}
 	}
 	else {
 		Assert(ptr->data);
-		if (ptr->data != NULL) {
+		if ( ptr->data ) {
 			vm_free(ptr->data);
 			ptr->data = NULL;
 		}
@@ -853,22 +914,173 @@ int anim_free(anim *ptr)
 	return 0;
 }

-/**
- * @brief Called at the beginning of a mission to initialize any mission dependent anim data.
- * @todo Redundant?
- */
+
+// ---------------------------------------------------------------------
+// anim_playing()
+//
+// Return if an anim is playing or not.  
+//
+int anim_playing(anim_instance *ai)
+{
+	Assert(ai != NULL);
+	if ( ai->frame == NULL )
+		return 0;
+	else 
+		return 1;
+}
+
+
+// ---------------------------------------------------------------------
+// anim_level_init()
+//
+// Called at the beginning of a mission to initialize any mission dependent
+// anim data.
+//
 void anim_level_init()
 {
 }

-/**
- * @brief Called after the end of a mission to clean up any mission dependent anim data. 
- */
+// ---------------------------------------------------------------------
+// anim_level_close()
+//
+// Called after the end of a mission to clean up any mission dependent 
+// anim data. 
+//
 void anim_level_close()
 {
 	anim_release_all_instances();
 }

+// ---------------------------------------------------
+//	anim_write_frames_out()
+//
+//	Write the frames of a .ani file out to disk as .pcx files.
+// Use naming convention: filename0000.pcx, filename0001.pcx etc.
+//
+// return:		0	=>		success
+//					-1	=>		failed
+//
+int anim_write_frames_out(char *filename)
+{
+	anim				*source_anim;
+	anim_instance	*ai;
+	char				root_name[256], pcxname[256];
+	char				buf[64];
+	int				i,j;
+	ubyte				**row_data;
+
+	strcpy_s(root_name, filename);
+	root_name[strlen(filename)-4] = 0;
+
+	source_anim = anim_load(filename);
+	if ( source_anim == NULL ) 
+		return -1;
+
+	ai = init_anim_instance(source_anim, 16);
+
+	row_data = (ubyte**)vm_malloc((source_anim->height+1) * 4);
+
+	for ( i = 0; i < source_anim->total_frames; i++ ) {
+		anim_get_next_raw_buffer(ai, 0, 0, 16);
+		strcpy_s(pcxname, root_name);
+		sprintf(buf,"%04d",i);
+		strcat_s(pcxname, buf);
+
+		for ( j = 0; j < source_anim->height; j++ ) {
+			row_data[j] = &ai->frame[j*source_anim->width];
+		}
+
+
+		pcx_write_bitmap( pcxname,
+								source_anim->width,
+								source_anim->height,
+								row_data,
+								source_anim->palette);
+
+		printf(".");
+
+	}
+	printf("\n");
+	vm_free(row_data);
+	return 0;
+}
+
+// ---------------------------------------------------
+//	anim_display_info()
+//
+//	Display information and statistics about a .ani file.
+//	This is called when -i switch is on when running ac.exe
+//
+void anim_display_info(char *real_filename)
+{
+	CFILE				*fp;
+	anim				A;
+	float				percent;
+	int				i, uncompressed, compressed, *key_frame_nums=NULL, tmp;
+	char filename[MAX_FILENAME_LEN];
+
+	strcpy_s( filename, real_filename );
+	char *p = strchr( filename, '.' );
+	if ( p ) {
+		*p = 0;
+	}
+	strcat_s( filename, ".ani" );
+
+	fp = cfopen(filename, "rb");
+	if ( !fp ) {
+		printf("Fatal error opening %s", filename);
+		return;
+	}
+
+	anim_read_header(&A, fp);
+	// read the keyframe frame nums and offsets
+	key_frame_nums = (int*)vm_malloc(sizeof(int)*A.num_keys);
+	Assert(key_frame_nums != NULL);
+	for ( i = 0; i < A.num_keys; i++ ) {
+		key_frame_nums[i] = 0;
+		cfread(&key_frame_nums[i], 2, 1, fp);
+		cfread(&tmp, 4, 1, fp);
+//printf("key frame num: %d,%d\n", key_frame_nums[i],tmp);
+	}
+
+	cfread(&compressed, 4, 1, fp);
+
+	uncompressed = A.width * A.height * A.total_frames;	// 8 bits per pixel
+	percent = i2fl(compressed) / uncompressed * 100.0f;
+
+	printf("%% of uncompressed size:    %.0f%%\n", percent);
+	printf("Width:                     %d\n", A.width);
+	printf("Height:                    %d\n", A.height);
+	printf("Total Frames:              %d\n", A.total_frames);
+
+#ifndef NDEBUG
+	printf("Key Frames:                %d\n", A.num_keys);
+	if ( A.num_keys > 1 && (A.total_frames != A.num_keys) ) {
+		printf("key list: (");
+		for ( i = 0; i < A.num_keys; i++ ) {
+			if ( i < A.num_keys-1 ) 
+				printf("%d, ", key_frame_nums[i]);
+			else
+				printf("%d)\n", key_frame_nums[i]);
+		}
+	}
+#endif
+
+	printf("FPS:                       %d\n", A.fps);
+
+#ifndef NDEBUG
+	printf("Transparent RGB:           (%d,%d,%d)\n", A.xparent_r, A.xparent_g, A.xparent_b); 
+#endif
+
+	printf("ac version:                %d\n", A.version);
+
+	if ( key_frame_nums != NULL ) {
+		vm_free(key_frame_nums);
+	}
+
+	cfclose(fp);
+}
+
 void anim_reverse_direction(anim_instance *ai)
 {
 	int temp;
@@ -902,6 +1114,16 @@ void anim_reverse_direction(anim_instance *ai)
 	}	
 }

+void anim_pause(anim_instance *ai)
+{
+	ai->paused = 1;
+}
+
+void anim_unpause(anim_instance *ai)
+{
+	ai->paused = 0;
+}
+
 void anim_ignore_next_frametime()
 {
 	Anim_ignore_frametime=1;
@@ -12,8 +12,8 @@
 #ifndef __ANIMPLAY_H__
 #define __ANIMPLAY_H__

-#include "cfile/cfile.h"
 #include "globalincs/pstypes.h"
+#include "cfile/cfile.h"

 struct anim;
 struct anim_info;
@@ -24,8 +24,6 @@ typedef struct {
 	anim *anim_info;
 	int x;
 	int y;
-	int base_w;
-	int base_h;
 	int start_at;
 	int stop_at;
 	int screen_id;
@@ -40,8 +38,9 @@ typedef struct {

 enum
 {
-	PAGE_FROM_DISK		  = 0,
-	PAGE_FROM_MEM		  = 1
+	PAGE_FROM_MEM		  = 0,
+	PAGE_FROM_DISK		  = 1,
+	PAGE_FROM_DISK_FORCED = 2
 };

 extern int Anim_paused;
@@ -51,16 +50,22 @@ void				anim_level_init();
 void				anim_level_close();
 void				anim_render_all(int screen_id, float frametime);
 void				anim_render_one(int screen_id, anim_instance *ani, float frametime);
-void				anim_play_init(anim_play_struct *aps, anim *a_info, int x, int y, int max_x = -1, int max_y = -1);
+void				anim_play_init(anim_play_struct *aps, anim *a_info, int x, int y);
 anim_instance *anim_play(anim_play_struct *aps);
 void				anim_ignore_next_frametime();
+int				anim_stop_playing(anim_instance* anim_instance);
 int				anim_show_next_frame(anim_instance *instance, float frametime);
 void				anim_release_all_instances(int screen_id = 0);
 void				anim_release_render_instance(anim_instance* instance);
-anim			  *anim_load(const char *name, int cf_dir_type = CF_TYPE_ANY, int file_mapped = PAGE_FROM_DISK);
+anim			  *anim_load(char *name, int cf_dir_type = CF_TYPE_ANY, int file_mapped = PAGE_FROM_MEM);
 int				anim_free(anim *ptr);
+int				anim_playing(anim_instance *ai);
+int				anim_write_frames_out(char *filename);
+void				anim_display_info(char *filename);
 void				anim_read_header(anim *ptr, CFILE *fp);
 void				anim_reverse_direction(anim_instance *ai);						// called automatically for ping-ponging, and can also be called externally
+void				anim_pause(anim_instance *ai);
+void				anim_unpause(anim_instance *ai);

 int	anim_instance_is_streamed(anim_instance *ai);
 unsigned char anim_instance_get_byte(anim_instance *ai, int offset);
@@ -9,10 +9,12 @@



-#include "anim/animplay.h"
 #include "anim/packunpack.h"
 #include "bmpman/bmpman.h"
 #include "graphics/2d.h"
+#include "anim/animplay.h"
+
+


 const int packer_code = PACKER_CODE;
@@ -49,7 +51,6 @@ anim_instance *init_anim_instance(anim *ptr, int bpp)
 	ptr->instance_count++;
 	inst = (anim_instance *) vm_malloc(sizeof(anim_instance));
 	Assert(inst);
-	memset(inst, 0, sizeof(anim_instance));
 	inst->frame_num = -1;
 	inst->last_frame_num = -1;
 	inst->parent = ptr;
@@ -78,6 +79,57 @@ void free_anim_instance(anim_instance *inst)
 	vm_free(inst);	
 }

+int anim_get_next_frame(anim_instance *inst)
+{
+	int bm, bitmap_flags;
+	int aabitmap = 0;
+	int bpp = 16;
+
+	if ( anim_instance_is_streamed(inst) ) {
+		if ( inst->file_offset <= 0 ) {
+			return -1;
+		}
+	} else {
+		if (!inst->data)
+			return -1;
+	}
+
+	inst->frame_num++;
+	if (inst->frame_num >= inst->parent->total_frames) {
+		inst->data = NULL;
+		inst->file_offset = inst->parent->file_offset;
+		return -1;
+	}
+
+	if (inst->parent->flags & ANF_XPARENT) {
+		// bitmap_flags = BMP_XPARENT;
+		bitmap_flags = 0;
+	} else {
+		bitmap_flags = 0;
+	}
+
+	bpp = 16;
+	if(inst->aa_color != NULL){
+		bitmap_flags |= BMP_AABITMAP;
+		aabitmap = 1;
+		bpp = 8;
+	}
+
+	anim_check_for_palette_change(inst);
+
+	BM_SELECT_TEX_FORMAT();
+
+	if ( anim_instance_is_streamed(inst) ) {
+		inst->file_offset = unpack_frame_from_file(inst, inst->frame, inst->parent->width*inst->parent->height, inst->parent->palette_translation, aabitmap, bpp);
+	} else {
+		inst->data = unpack_frame(inst, inst->data, inst->frame, inst->parent->width*inst->parent->height, inst->parent->palette_translation, aabitmap, bpp);
+	}
+
+	bm = bm_create(bpp, inst->parent->width, inst->parent->height, inst->frame, bitmap_flags);
+	bm_unload(bm);
+	return bm;
+}
+
 ubyte *anim_get_next_raw_buffer(anim_instance *inst, int xlate_pal, int aabitmap, int bpp)
 {	
 	if ( anim_instance_is_streamed(inst) ) {
@@ -116,11 +168,320 @@ ubyte *anim_get_next_raw_buffer(anim_instance *inst, int xlate_pal, int aabitmap
 	return inst->frame;
 }

-/**
- * @brief Convert a 24 bit value to a 16 bit value
- * @param bit_24 24 bit value
- * @param bit_16 16 bit value (output)
- */
+// frame = frame pixel data to pack
+// save = memory to store packed data to
+// size = number of bytes to pack
+// max = maximum number of packed bytes (size of buffer)
+// returns: actual number of bytes data packed to or -1 if error
+int pack_key_frame(ubyte *frame, ubyte *save, long size, long max, int compress_type)
+{
+	int last = -32768, count = 0;
+	long packed_size = 1;
+
+	switch ( compress_type ) {
+		case PACKING_METHOD_RLE_KEY:
+			*save++ = PACKING_METHOD_RLE_KEY;
+			while (size--) {
+				if (*frame != last || count > 255) {
+					if (packed_size + 3 >= max)
+						return -1;
+
+					if (count < 3) {
+						if (last == packer_code) {
+							*save++ = (ubyte)packer_code;
+							*save++ = (ubyte)(count - 1);
+							packed_size += 2;
+
+						} else
+							while (count--) {
+								*save++ = (ubyte)last;
+								packed_size++;
+							}
+
+					} else {
+						*save++ = (ubyte)packer_code;
+						*save++ = (ubyte)(count - 1);
+						*save++ = (ubyte)last;
+						packed_size += 3;
+					}
+
+					count = 0;
+					last = *frame;
+				}
+
+				count++;
+				frame++;
+			}
+
+			if (packed_size + 3 >= max)
+				return -1;
+
+			if (count < 3) {
+				if (last == packer_code) {
+					*save++ = (ubyte)packer_code;
+					*save++ = (ubyte)(count - 1);
+					packed_size += 2;
+
+				} else
+					while (count--) {
+						*save++ = (ubyte)last;
+						packed_size++;
+					}
+
+			} else {
+				*save++ = (ubyte)packer_code;
+				*save++ = (ubyte)(count - 1);
+				*save++ = (ubyte)last;
+				packed_size += 3;
+			}
+			break;
+
+		case PACKING_METHOD_STD_RLE_KEY: {
+			ubyte *dest_start;
+			int i;
+
+			dest_start = save;
+			count = 1;
+
+			last = *frame++;
+			*save++ = PACKING_METHOD_STD_RLE_KEY;
+			for (i=1; i < size; i++ )	{
+
+				if ( *frame != last ) {
+					if ( count ) {
+
+						if (packed_size + 2 >= max)
+							return -1;
+
+						if ( (count == 1) && !(last & STD_RLE_CODE) ) {
+							*save++ = (ubyte)last;
+							packed_size++;
+							Assert( last != STD_RLE_CODE );
+//							printf("Just packed %d 1 times, since pixel change, no count included\n",last);
+						}
+						else {
+							count |= STD_RLE_CODE;
+							*save++ = (ubyte)count;
+							*save++ = (ubyte)last;
+							packed_size += 2;
+//							printf("Just packed %d %d times, since pixel change\n",last,count);
+						}
+					}
+		
+					last = *frame;
+					count = 0;
+				}
+
+				count++;
+				frame++;
+
+				if ( count == 127 ) {
+					count |= STD_RLE_CODE;
+					*save++ = (ubyte)count;
+					*save++ = (ubyte)last;
+					packed_size += 2;
+					count = 0;
+//					printf("Just packed %d %d times, since count overflow\n",last,count);
+
+				}
+			}	// end for
+
+			if (count)	{
+
+				if (packed_size + 2 >= max)
+					return -1;
+
+				if ( (count == 1) && !(last & STD_RLE_CODE) ) {
+					*save++ = (ubyte)last;
+					packed_size++;
+//					printf("Just packed %d 1 times, at end since single pixel, no count\n",last);
+					Assert( last != STD_RLE_CODE );
+				}
+				else {
+					count |= STD_RLE_CODE;
+					*save++ = (ubyte)count;
+					*save++ = (ubyte)last;
+					packed_size += 2;
+//					printf("Just packed %d %d times, at end since pixel change\n",last,count);
+				}
+			}
+
+			Assert(packed_size == (save-dest_start) );
+			return packed_size;
+			break;
+			}
+
+		default:
+			Assert(0);
+			return -1;
+			break;
+	} // end switch
+
+	return packed_size;
+}
+
+// frame = frame pixel data to pack
+// frame2 = previous frame's pixel data
+// save = memory to store packed data to
+// size = number of bytes to pack
+// max = maximum number of packed bytes (size of buffer)
+// returns: actual number of bytes data packed to or -1 if error
+int pack_frame(ubyte *frame, ubyte *frame2, ubyte *save, long size, long max, int compress_type)
+{
+	int pixel, last = -32768, count = 0, i;
+	long packed_size = 1;
+
+	switch ( compress_type ) {
+		case PACKING_METHOD_RLE:					// Hoffoss RLE regular frame
+			*save++ = PACKING_METHOD_RLE;
+			while (size--) {
+				if (*frame != *frame2++)
+					pixel = *frame;
+				else
+					pixel = transparent_code;
+
+				if (pixel != last || count > 255) {
+					if (packed_size + 3 >= max)
+						return -1;
+
+					if (count < 3) {
+						if (last == packer_code) {
+							*save++ = (ubyte)packer_code;
+							*save++ = (ubyte)(count - 1);
+							packed_size += 2;
+
+						} else
+							while (count--) {
+								*save++ = (ubyte)last;
+								packed_size++;
+							}
+
+					} else {
+						*save++ = (ubyte)packer_code;
+						*save++ = (ubyte)(count - 1);
+						*save++ = (ubyte)last;
+						packed_size += 3;
+					}
+
+					count = 0;
+					last = pixel;
+				}
+
+				frame++;
+				count++;
+			}
+
+			if (packed_size + 3 >= max)
+				return -1;
+
+			if (count < 3) {
+				if (last == packer_code) {
+					*save++ = (ubyte)packer_code;
+					*save++ = (ubyte)(count - 1);
+					packed_size += 2;
+
+				} else
+					while (count--) {
+						*save++ = (ubyte)last;
+						packed_size++;
+					}
+
+			} else {
+				*save++ = (ubyte)(packer_code);
+				*save++ = (ubyte)(count - 1);
+				*save++ = (ubyte)(last);
+				packed_size += 3;
+			}
+			break;
+
+		case PACKING_METHOD_STD_RLE: {		// high bit count regular RLE frame
+
+			ubyte *dest_start;
+
+			dest_start = save;
+			count = 1;
+
+			if (*frame++ != *frame2++)
+				last = *frame;
+			else
+				last = transparent_code;
+
+			*save++ = PACKING_METHOD_STD_RLE;
+			for (i=1; i < size; i++ )	{
+
+				if (*frame != *frame2++)
+					pixel = *frame;
+				else
+					pixel = transparent_code;
+
+				if ( pixel != last ) {
+					if ( count ) {
+
+						if (packed_size + 2 >= max)
+							return -1;
+
+						if ( (count == 1) && !(last & STD_RLE_CODE) ) {
+							*save++ = (ubyte)last;
+							packed_size++;
+							Assert( last != STD_RLE_CODE );
+						}
+						else {
+							count |= STD_RLE_CODE;
+							*save++ = (ubyte)count;
+							*save++ = (ubyte)last;
+							packed_size += 2;
+						}
+					}
+		
+					last = pixel;
+					count = 0;
+				}
+
+				count++;
+				frame++;
+
+				if ( count == 127 ) {
+					count |= STD_RLE_CODE;
+					*save++ = (ubyte)count;
+					*save++ = (ubyte)last;
+					packed_size += 2;
+					count = 0;
+				}
+			}	// end for
+
+			if (count)	{
+
+				if (packed_size + 2 >= max)
+					return -1;
+
+				if ( (count == 1) && !(last & STD_RLE_CODE) ) {
+					*save++ = (ubyte)last;
+					packed_size++;
+					Assert( last != STD_RLE_CODE );
+				}
+				else {
+					count |= STD_RLE_CODE;
+					*save++ = (ubyte)count;
+					*save++ = (ubyte)last;
+					packed_size += 2;
+				}
+			}
+
+			Assert(packed_size == (save-dest_start) );
+			return packed_size;
+			break;
+			}
+
+		default:
+			Assert(0);
+			return -1;
+			break;
+	} // end switch
+
+	return packed_size;
+}
+
+// convert a 24 bit value to a 16 bit value
 void convert_24_to_16(int bit_24, ushort *bit_16)
 {
 	ubyte *pixel = (ubyte*)&bit_24;
@@ -129,10 +490,7 @@ void convert_24_to_16(int bit_24, ushort *bit_16)
 	bm_set_components((ubyte*)bit_16, (ubyte*)&pixel[0], (ubyte*)&pixel[1], (ubyte*)&pixel[2], &alpha);
 }

-/**
- * @brief Unpack a pixel given the passed index and the anim_instance's palette
- * @return Bytes stuffed
- */
+// unpack a pixel given the passed index and the anim_instance's palette, return bytes stuffed
 int unpack_pixel(anim_instance *ai, ubyte *data, ubyte pix, int aabitmap, int bpp)
 {
 	int bit_24;
@@ -151,14 +509,7 @@ int unpack_pixel(anim_instance *ai, ubyte *data, ubyte pix, int aabitmap, int bp
 			bit_16 = (ushort)pix;
 			break;
 		case 8:
-			// 8 bit-per-pixel aa bitmaps are a bit special since they only use value in the range [0, 15] where 15 wraps
-			// around back to 0. Since the rest of the code expects the value to be in the range [0, 255] the pixel value
-			// needs to be adjusted here. By muliplying the value with 17 the original range [0, 15] is mapped to [0, 255]
-			if (pix >= 15) {
-				bit_8 = 0;
-			} else {
-				bit_8 = (ubyte)(pix * 17);
-			}
+			bit_8 = pix;
 			break;
 		default:
 			Int3();
@@ -188,7 +539,7 @@ int unpack_pixel(anim_instance *ai, ubyte *data, ubyte pix, int aabitmap, int bp
 				}
 			} else {
 				// stuff the 24 bit value
-				memcpy(&bit_24, &ai->parent->palette[pix * 3], 3); //-V512
+				memcpy(&bit_24, &ai->parent->palette[pix * 3], 3);

 				// convert to 16 bit
 				convert_24_to_16(bit_24, &bit_16);
@@ -219,10 +570,7 @@ int unpack_pixel(anim_instance *ai, ubyte *data, ubyte pix, int aabitmap, int bp
 	return pixel_size;
 }

-/**
- * @brief Unpack a pixel given the passed index and the anim_instance's palette
- * @return Bytes stuffed
- */
+// unpack a pixel given the passed index and the anim_instance's palette, return bytes stuffed
 int unpack_pixel_count(anim_instance *ai, ubyte *data, ubyte pix, int count = 0, int aabitmap = 0, int bpp = 8)
 {
 	int bit_24;
@@ -242,14 +590,7 @@ int unpack_pixel_count(anim_instance *ai, ubyte *data, ubyte pix, int count = 0,
 			bit_16 = (ushort)pix;
 			break;
 		case 8 :
-			// 8 bit-per-pixel aa bitmaps are a bit special since they only use value in the range [0, 15] where 15 wraps
-			// around back to 0. Since the rest of the code expects the value to be in the range [0, 255] the pixel value
-			// needs to be adjusted here. By muliplying the value with 17 the original range [0, 15] is mapped to [0, 255]
-			if (pix >= 15) {
-				bit_8 = 0;
-			} else {
-				bit_8 = (ubyte)(pix * 17);
-			}
+			bit_8 = pix;
 			break;
 		default :
 			Int3();			
@@ -279,7 +620,7 @@ int unpack_pixel_count(anim_instance *ai, ubyte *data, ubyte pix, int count = 0,
 				}
 			} else {
 				// stuff the 24 bit value
-				memcpy(&bit_24, &ai->parent->palette[pix * 3], 3); //-V512
+				memcpy(&bit_24, &ai->parent->palette[pix * 3], 3);
 				
 				// convert to 16 bit
 				convert_24_to_16(bit_24, &bit_16);
@@ -308,17 +649,10 @@ int unpack_pixel_count(anim_instance *ai, ubyte *data, ubyte pix, int count = 0,
 	return (pixel_size * count);
 }

-/**
- * @brief Unpack frame
- *
- * @param ai Animation instance
- * @param ptr Packed data to unpack
- * @param frame Where to store unpacked data to
- * @param size Total number of unpacked pixels requested
- * @param pal_translate Color translation lookup table (NULL if no palette translation desired)
- * @param aabitmap
- * @param bpp
- */
+// ptr = packed data to unpack
+// frame = where to store unpacked data to
+// size = total number of unpacked pixels requested
+// pal_translate = color translation lookup table (NULL if no palette translation desired)
 ubyte	*unpack_frame(anim_instance *ai, ubyte *ptr, ubyte *frame, int size, ubyte *pal_translate, int aabitmap, int bpp)
 {
 	int	xlate_pal, value, count = 0;
@@ -401,6 +735,9 @@ ubyte	*unpack_frame(anim_instance *ai, ubyte *ptr, ubyte *frame, int size, ubyte
 		}
 	}
 	else if (*ptr == PACKING_METHOD_RLE) {  // normal frame, Hoffoss's RLE format
+
+// test code, to show unused pixels
+// memset(frame, 255, size);
 	
 		ptr++;
 		while (size > 0) {
@@ -491,23 +828,17 @@ ubyte	*unpack_frame(anim_instance *ai, ubyte *ptr, ubyte *frame, int size, ubyte
 		}
 	}
 	else {
-		// unknown packing method
+	//	Assert(0);  // unknown packing method
 		return NULL;
 	}

 	return ptr;
 }

-/**
- * @brief Unpack frame from file
- *
- * @param ai Animation instance
- * @param frame Where to store unpacked data to
- * @param size Total number of unpacked pixels requested
- * @param pal_translate Color translation lookup table (NULL if no palette translation desired)
- * @param aabitmap
- * @param bpp
- */
+// ptr = packed data to unpack
+// frame = where to store unpacked data to
+// size = total number of unpacked pixels requested
+// pal_translate = color translation lookup table (NULL if no palette translation desired)
 int unpack_frame_from_file(anim_instance *ai, ubyte *frame, int size, ubyte *pal_translate, int aabitmap, int bpp)
 {
 	int	xlate_pal, value, count = 0;
@@ -597,6 +928,9 @@ int unpack_frame_from_file(anim_instance *ai, ubyte *frame, int size, ubyte *pal
 		}
 	}
 	else if (anim_instance_get_byte(ai,offset) == PACKING_METHOD_RLE) {  // normal frame, Hoffoss's RLE format
+
+// test code, to show unused pixels
+// memset(frame, 255, size);
 	
 		offset++;
 		while (size > 0) {
@@ -699,17 +1033,21 @@ int unpack_frame_from_file(anim_instance *ai, ubyte *frame, int size, ubyte *pal
 }


-/**
- * @brief Set animation palette
- * @todo Actually convert the frame data to correct palette at this point
- */
+// TODO: actually convert the frame data to correct palette at this point
 void anim_set_palette(anim *ptr)
 {
 	int i, xparent_found = 0;
 	
 	// create the palette translation look-up table
 	for ( i = 0; i < 256; i++ ) {
-		ptr->palette_translation[i] = (ubyte)i;
+
+		//if ( (ptr->palette[i*3] == ptr->xparent_r) && (ptr->palette[i*3+1] == ptr->xparent_g) && (ptr->palette[i*3+2] == ptr->xparent_b) ) {
+		//	ptr->palette_translation[i] = 255;
+		//	xparent_found = 1;
+		//} else	{
+			// ptr->palette_translation[i] = (ubyte)palette_find( ptr->palette[i*3], ptr->palette[i*3+1], ptr->palette[i*3+2] );
+			ptr->palette_translation[i] = (ubyte)i;
+		//}
 	}	

 	if ( xparent_found ) {
@@ -18,11 +18,11 @@ struct CFILE;

 #define ANI_STREAM_CACHE_SIZE			4096

-#define PACKER_CODE						0xEE	/// Used by PACKING_METHOD_RLE
-#define PACKING_METHOD_RLE				0		/// Hoffoss's RLE format
-#define PACKING_METHOD_RLE_KEY			1		/// Hoffoss's key frame RLE format
-#define PACKING_METHOD_STD_RLE			2		/// Standard RLE format (high bit is count)
-#define PACKING_METHOD_STD_RLE_KEY		3		/// Standard RLE format key frame
+#define PACKER_CODE						0xEE	// Use'd by PACKING_METHOD_RLE
+#define PACKING_METHOD_RLE				0		// Hoffoss's RLE format
+#define PACKING_METHOD_RLE_KEY		1		// Hoffoss's key frame RLE format
+#define PACKING_METHOD_STD_RLE		2		// Standard RLE format (high bit is count)
+#define PACKING_METHOD_STD_RLE_KEY	3		// Standard RLE format key frame

 #define STD_RLE_CODE						0x80

@@ -71,7 +71,6 @@ typedef struct anim {
 typedef struct anim_instance {
 	anim_instance *next, *prev;
 	int		x,y;				// coordinates anim is played at (top left corner of anim)
-	int		base_w, base_h;		// coordinate scale this anim is played in. 
 	vec3d	*world_pos;		// world (x,y,z) position of explosion
 	float		radius;			// radius of image, needed for scaling
 	int		frame_num;		// current frame, or last frame if between frames (first frame is 0)
@@ -97,12 +96,16 @@ typedef struct anim_instance {
 	int		loop_count;		// starts at 0, and is incremented each time it loops
 } anim_instance;

+int	pack_key_frame(ubyte *frame, ubyte *save, long size, long max, int compress_type);
+int	pack_frame(ubyte *frame, ubyte *frame2, ubyte *save, long size, long max, int compress_type);
+
 ubyte	*unpack_frame(anim_instance *ai, ubyte *ptr, ubyte *frame, int size, ubyte *pal_translate, int aabitmap, int bpp);
 int unpack_frame_from_file(anim_instance *ai, ubyte *frame, int size, ubyte *pal_translate, int aabitmap, int bpp);

 void	anim_init();
 anim_instance *init_anim_instance(anim *ptr, int bpp);
 void	free_anim_instance(anim_instance *inst);
+int	anim_get_next_frame(anim_instance *inst);
 ubyte *anim_get_next_raw_buffer(anim_instance *inst, int xlate_pal, int aabitmap, int bpp);
 void	anim_set_palette(anim *a);
 void	anim_check_for_palette_change(anim_instance *inst);
@@ -12,24 +12,28 @@
 #ifndef __ASTEROID_H__
 #define __ASTEROID_H__

-#include "globalincs/globals.h"		// for NAME_LENGTH
 #include "globalincs/pstypes.h"
+#include "globalincs/globals.h"		// for NAME_LENGTH


-class object;
-class polymodel;
+struct object;
+struct polymodel;
 struct collision_info_struct;
-class model_draw_list;

 #define	MAX_ASTEROIDS			512

-#define NUM_DEBRIS_SIZES		3
-#define	NUM_DEBRIS_POFS			3				// Number of POFs per debris size
+#define NUM_DEBRIS_SIZES	3
+#define	NUM_DEBRIS_POFS		3				// Number of POFs per debris size

 #define	ASTEROID_TYPE_SMALL		0
 #define	ASTEROID_TYPE_MEDIUM	1
 #define	ASTEROID_TYPE_LARGE		2

+// This is for the asteroid types plus DEBRIS_X_Y
+// (X is each species and Y is SMALL, MEDIUM, and LARGE)
+// 20060826 - made dynamic -- taylor
+//#define	MAX_DEBRIS_TYPES	((MAX_SPECIES + 1) * NUM_DEBRIS_SIZES)
+
 // these should always be equal for the benefit of generic asteroids (c.f. asteroid_page_in)
 #define	MAX_ACTIVE_DEBRIS_TYPES		NUM_DEBRIS_SIZES

@@ -45,69 +49,49 @@ typedef struct asteroid_obj {
 extern asteroid_obj Asteroid_obj_list;


-// Data structure for determining a type and amount of other asteroids an
-// asteroid will split to when destroyed.
-typedef struct asteroid_split_info {
-	int		asteroid_type;
-	int		min;
-	int		max;
-} asteroid_split_info;
-
-class asteroid_info
-{
-public:
-	char		name[NAME_LENGTH];								// name for the asteroid
-	char		pof_files[NUM_DEBRIS_POFS][MAX_FILENAME_LEN];	// POF files to load/associate with ship
-	int			num_detail_levels;								// number of detail levels for this ship
-	int			detail_distance[MAX_ASTEROID_DETAIL_LEVELS];	// distance to change detail levels at
-	float		max_speed;										// cap on speed for asteroid
-	int			damage_type_idx;								//Damage type of the asteroid
-	int			damage_type_idx_sav;							// stored value from table used to reset damage_type_idx
-	float		inner_rad;										// radius within which maximum area effect damage is applied
-	float		outer_rad;										// radius at which no area effect damage is applied
-	float		damage;											// maximum damage applied from area effect explosion
-	float		blast;											// maximum blast impulse from area effect explosion
-	float		initial_asteroid_strength;						// starting strength of asteroid
-	SCP_vector< asteroid_split_info > split_info;
+typedef struct asteroid_info {
+	char			name[NAME_LENGTH];								// name for the asteroid
+	char			pof_files[NUM_DEBRIS_POFS][MAX_FILENAME_LEN];		// POF files to load/associate with ship
+	int			num_detail_levels;									// number of detail levels for this ship
+	int			detail_distance[MAX_ASTEROID_DETAIL_LEVELS];		// distance to change detail levels at
+	float			max_speed;												// cap on speed for asteroid
+	int				damage_type_idx;								//Damage type of the asteroid
+	float			inner_rad;												// radius within which maximum area effect damage is applied
+	float			outer_rad;												// radius at which no area effect damage is applied
+	float			damage;													// maximum damage applied from area effect explosion
+	float			blast;													// maximum blast impulse from area effect explosion									
+	float			initial_asteroid_strength;								// starting strength of asteroid
 	polymodel	*modelp[NUM_DEBRIS_POFS];
 	int			model_num[NUM_DEBRIS_POFS];
-	SCP_vector<int> explosion_bitmap_anims;
-	float		fireball_radius_multiplier;						// the model radius is multiplied by this to determine the fireball size

-	asteroid_info( )
-		: num_detail_levels( 0 ), max_speed( 0 ), damage_type_idx( 0 ),
-		  damage_type_idx_sav( -1 ), inner_rad( 0 ), outer_rad( 0 ),
-		  damage( 0 ), blast( 0 ), initial_asteroid_strength( 0 ),
-		  fireball_radius_multiplier( -1 )
-	{
-		name[ 0 ] = 0;
+	asteroid_info( ) 
+		: num_detail_levels( 0 ), max_speed( 0 ), damage_type_idx( -1 ),
+		  inner_rad( 0 ), outer_rad( 0 ), damage( 0 ), blast( 0 ),
+		  initial_asteroid_strength( 0 )
+	{ 
+		name[ 0 ] = NULL;
+		memset( pof_files, 0, sizeof( pof_files ) );
 		memset( detail_distance, 0, sizeof( detail_distance ) );
-
-		for (int i = 0; i < NUM_DEBRIS_POFS; i++)
-		{
-			modelp[i] = NULL;
-			model_num[i] = -1;
-			pof_files[i][0] = 0;
-		}
+		memset( modelp, 0, sizeof( modelp ) );
+		memset( model_num, 0, sizeof( model_num ) );
 	}
-};
+} asteroid_info;


-#define	AF_USED					(1<<0)			// Set means used.
+#define	AF_USED					(1<<0)			//	Set means used.

 typedef	struct asteroid {
 	int		flags;
 	int		objnum;
-	int		model_instance_num;
 	int		asteroid_type;		// 0..MAX_DEBRIS_TYPES
 	int		asteroid_subtype;	// Index in asteroid_info for modelnum and modelp
-	int		check_for_wrap;		// timestamp to check for asteroid wrapping around field
+	int		check_for_wrap;		//	timestamp to check for asteroid wrapping around field
 	int		check_for_collide;	// timestamp to check for asteroid colliding with escort ships
-	int		final_death_time;	// timestamp to swap in new models after explosion starts
+	int		final_death_time;		// timestamp to swap in new models after explosion starts
 	int		collide_objnum;		// set to objnum that asteroid will be impacting soon
 	int		collide_objsig;		// object signature corresponding to collide_objnum
-	vec3d	death_hit_pos;		// hit pos that caused death
-	int		target_objnum;		// Yes, hah!  Asteroids can have targets.  See asteroid_aim_at_target().
+	vec3d	death_hit_pos;			// hit pos that caused death
+	int		target_objnum;			//	Yes, hah!  Asteroids can have targets.  See asteroid_aim_at_target().
 } asteroid;


@@ -124,16 +108,15 @@ typedef enum {
 } field_type_t;

 typedef	struct asteroid_field {
-	vec3d	min_bound;					// Minimum range of field.
-	vec3d	max_bound;					// Maximum range of field.
-	float	bound_rad;
+	vec3d	min_bound;						//	Minimum range of field.
+	vec3d	max_bound;						//	Maximum range of field.
 	int		has_inner_bound;
 	vec3d	inner_min_bound;
 	vec3d	inner_max_bound;
-	vec3d	vel;						// Average asteroid moves at this velocity.
-	float		speed;					// Average speed of field
-	int		num_initial_asteroids;		// Number of asteroids at creation.
-	field_type_t		field_type;		// active throws and wraps, passive does not
+	vec3d	vel;								//	Average asteroid moves at this velocity.
+	float		speed;							// Average speed of field
+	int		num_initial_asteroids;		//	Number of asteroids at creation.
+	field_type_t		field_type;			// active throws and wraps, passive does not
 	debris_genre_t	debris_genre;		// type of debris (ship or asteroid)  [generic type]
 	int				field_debris_type[MAX_ACTIVE_DEBRIS_TYPES];	// one of the debris type defines above
 } asteroid_field;
@@ -144,25 +127,23 @@ extern asteroid_field	Asteroid_field;

 extern int	Num_asteroids;
 extern int	Asteroids_enabled;
-extern char		Asteroid_icon_closeup_model[NAME_LENGTH];	// model for asteroid field briefing icon rendering
-extern vec3d	Asteroid_icon_closeup_position;  // closeup position for asteroid field briefing icon rendering
-extern float	Asteroid_icon_closeup_zoom;		 // zoom position for asteroid field briefing icon rendering

-void	asteroid_init();
+void	asteroid_init();	
 void	asteroid_level_init();
 void	asteroid_level_close();
 void	asteroid_create_all();
-void	asteroid_render(object * obj, model_draw_list *scene);
+void	asteroid_render( object *asteroid_objp );
 void	asteroid_delete( object *asteroid_objp );
-void	asteroid_process_pre( object *asteroid_objp );
-void	asteroid_process_post( object *asteroid_objp);
-int	asteroid_check_collision( object *asteroid_objp, object * other_obj, vec3d * hitpos, collision_info_struct *asteroid_hit_info=NULL, vec3d* hitnormal=NULL );
-void	asteroid_hit( object *pasteroid_objp, object *other_objp, vec3d *hitpos, float damage );
+void	asteroid_process_pre( object *asteroid_objp, float frame_time);
+void	asteroid_process_post( object *asteroid_objp, float frame_time);
+int	asteroid_check_collision( object *asteroid_objp, object * other_obj, vec3d * hitpos, collision_info_struct *asteroid_hit_info=NULL );
+void	asteroid_hit( object *asteroid_objp, object *other_objp, vec3d *hitpos, float damage );
 int	asteroid_count();
 int	asteroid_collide_objnum(object *asteroid_objp);
 float asteroid_time_to_impact(object *asteroid_objp);
 void	asteroid_show_brackets();
 void	asteroid_target_closest_danger();
+int	asteroid_get_random_in_cone(vec3d *pos, vec3d *dir, float ang, int danger = 0);

 // need to extern for multiplayer
 void asteroid_sub_create(object *parent_objp, int asteroid_type, vec3d *relvec);
@@ -5,28 +5,28 @@



+#include "autopilot/autopilot.h"
 #include "ai/ai.h"
 #include "ai/aigoals.h"
-#include "asteroid/asteroid.h"
-#include "autopilot/autopilot.h"
-#include "camera/camera.h"
-#include "cfile/cfile.h"
-#include "freespace.h"
-#include "gamesnd/eventmusic.h"
-#include "def_files/def_files.h"
-#include "globalincs/linklist.h"
-#include "iff_defs/iff_defs.h"
-#include "io/timer.h"
-#include "localization/localize.h"
-#include "mission/missionmessage.h"
-#include "mission/missiontraining.h"
+#include "ship/ship.h"
+#include "object/object.h"
 #include "object/objcollide.h"
 #include "object/waypoint.h"
-#include "parse/parselo.h"
 #include "parse/sexp.h"
-#include "ship/ship.h"
+#include "freespace2/freespace.h"
+#include "globalincs/linklist.h"
+#include "iff_defs/iff_defs.h"
 #include "sound/audiostr.h"
-
+#include "mission/missiontraining.h"
+#include "mission/missionmessage.h"
+#include "io/timer.h"
+#include "gamesnd/eventmusic.h"
+#include "cfile/cfile.h"
+#include "parse/parselo.h"
+#include "globalincs/def_files.h"
+#include "localization/localize.h"
+#include "camera/camera.h"
+#include "asteroid/asteroid.h"
 #include <map>

 // Extern functions/variables
@@ -54,7 +54,7 @@ int camMovingTime;
 //float CameraSpeed;
 bool CinematicStarted, CameraMoving;
 vec3d cameraPos, cameraTarget;
-SCP_map<int,int> autopilot_wings;
+std::map<int,int> autopilot_wings;

 int AutopilotMinEnemyDistance;
 int AutopilotMinAsteroidDistance;
@@ -67,7 +67,14 @@ int start_dist;
 void autopilot_ai_waypoint_goal_fixup(ai_goal* aigp)
 {
 	// this function sets wp_index properly;
-	aigp->wp_list = find_matching_waypoint_list(aigp->target_name);
+	for (int i = 0; i < Num_waypoint_lists; i++)
+	{
+		if (!stricmp(aigp->ship_name, Waypoint_lists[i].name))
+		{
+			aigp->wp_index = i;
+			return;
+		}
+	}
 }


@@ -112,9 +119,7 @@ vec3d *NavPoint::GetPosition()
 {
 	if (flags & NP_WAYPOINT)
 	{
-		waypoint *wpt = find_waypoint_at_index((waypoint_list*) target_obj, waypoint_num-1);
-		Assert(wpt != NULL);
-		return wpt->get_pos();
+		return &((waypoint_list*) target_obj)->waypoints[waypoint_num-1];
 	}
 	else
 	{
@@ -122,6 +127,31 @@ vec3d *NavPoint::GetPosition()
 	}
 }

+char* NavPoint::GetInteralName()
+{
+	char *NavName;
+	char strtmp[33];
+
+	if (flags & NP_WAYPOINT)
+	{
+		NavName = new char[strlen(((waypoint_list*)target_obj)->name)+5];
+		memset(NavName, 0, strlen(((waypoint_list*)target_obj)->name)+5);
+		strcpy(NavName, ((waypoint_list*)target_obj)->name);
+
+		strcat(NavName, ":");
+		sprintf(strtmp, "%d", waypoint_num);
+		strcat(NavName, strtmp);
+	}
+	else
+	{		
+		NavName = new char[strlen(((ship*)target_obj)->ship_name)+1];
+		memset(NavName, 0, strlen(((ship*)target_obj)->ship_name)+1);
+		strcpy(NavName, ((ship*)target_obj)->ship_name);
+	}
+
+	return NavName;
+}
+
 // ********************************************************************************************
 bool CanAutopilot(vec3d targetPos, bool send_msg)
 {
@@ -153,7 +183,7 @@ bool CanAutopilot(vec3d targetPos, bool send_msg)
 			object *other_objp = &Objects[so->objnum];
 			// attacks player?
 			if (iff_x_attacks_y(obj_team(other_objp), obj_team(Player_obj)) 
-				&& !(Ship_info[Ships[other_objp->instance].ship_info_index].flags[Ship::Info_Flags::Cargo])) // ignore cargo
+				&& !(Ship_info[Ships[other_objp->instance].ship_info_index].flags & SIF_CARGO)) // ignore cargo
 			{
 				// Cannot autopilot if enemy within AutopilotMinEnemyDistance meters
 				if (vm_vec_dist_quick(&targetPos, &other_objp->pos) < AutopilotMinEnemyDistance) {
@@ -184,7 +214,7 @@ bool CanAutopilot(vec3d targetPos, bool send_msg)

 	// check for support ships
 	// cannot autopilot if support ship present
-	if ( ship_find_repair_ship(Player_obj) != 0 ) {
+	if ( ship_find_repair_ship(Player_obj) != NULL ) {
 		if (send_msg)
 			send_autopilot_msgID(NP_MSG_FAIL_SUPPORT_PRESENT);
 		return false;
@@ -200,49 +230,38 @@ extern object* Autopilot_flight_leader;
 //        * Control switched from player to AI
 //        * Time compression to 32x
 //        * Lock time compression -WMC
-//        * Tell AI to fly to targeted Nav Point (for all nav-status wings/ships)
+//        * Tell AI to fly to targetted Nav Point (for all nav-status wings/ships)
 //		  * Sets max waypoint speed to the best-speed of the slowest ship tagged
 bool StartAutopilot()
 {
 	// Check for support ship and dismiss it if it is not doing anything.
 	// If the support ship is doing something then tell the user such.
-	for ( object *objp = GET_FIRST(&obj_used_list); objp !=END_OF_LIST(&obj_used_list); objp = GET_NEXT(objp) )
-	{
-		if ((objp->type == OBJ_SHIP) && !(objp->flags[Object::Object_Flags::Should_be_dead]))
-		{
-			Assertion((objp->instance >= 0) && (objp->instance < MAX_SHIPS),
-				"objp does not have a valid pointer to a ship. Pointer is %d, which is smaller than 0 or bigger than %d",
-				objp->instance, MAX_SHIPS);
-			ship *shipp = &Ships[objp->instance];
-
-			if (shipp->team != Player_ship->team)
-				continue;
-
-			Assertion((shipp->ship_info_index >= 0) && (shipp->ship_info_index < static_cast<int>(Ship_info.size())),
-				"Ship '%s' does not have a valid pointer to a ship class. Pointer is %d, which is smaller than 0 or bigger than %d",
-				shipp->ship_name, shipp->ship_info_index, static_cast<int>(Ship_info.size()));
-			ship_info *sip = &Ship_info[shipp->ship_info_index];
-
-			if ( !(sip->flags[Ship::Info_Flags::Support]) )
-				continue;
-
-			// don't deal with dying or departing support ships
-			if ( shipp->is_dying_or_departing() )
-				continue;
-
-			Assert(shipp->ai_index != -1);
-			ai_info* support_ship_aip = &(Ai_info[Ships[objp->instance].ai_index]);
-
-			// is support ship trying to rearm-repair
-			if ( ai_find_goal_index( support_ship_aip->goals, AI_GOAL_REARM_REPAIR ) == -1 ) {
-				// no, so tell it to depart
-				ai_add_ship_goal_player( AIG_TYPE_PLAYER_SHIP, AI_GOAL_WARP, -1, NULL, support_ship_aip );
-			} else {
-				// yes
-				send_autopilot_msgID(NP_MSG_FAIL_SUPPORT_WORKING);
-				return false;
-			}
+	bool done = false;
+	while (!done) {
+		object* support_ship_op = ship_find_repair_ship(Player_obj);
+		if ( support_ship_op == NULL ) {
+			// no more
+			done = true;
+			break;
 		}
+
+		Assert( support_ship_op->type == OBJ_SHIP );
+		Assert( support_ship_op->instance >= 0 );
+		Assert( support_ship_op->instance < MAX_SHIPS );
+		Assert( Ships[support_ship_op->instance].ai_index != -1 );
+
+		ai_info* support_ship_aip = &(Ai_info[Ships[support_ship_op->instance].ai_index]);
+
+		// is support ship trying to rearm-repair
+		if ( ai_find_goal_index( support_ship_aip->goals, AI_GOAL_REARM_REPAIR ) == -1 ) {
+			// no, so tell it to depart
+			ai_add_ship_goal_player( AIG_TYPE_PLAYER_SHIP, AI_GOAL_WARP, -1, NULL, support_ship_aip );
+		} else {
+			// yes
+			send_autopilot_msgID(NP_MSG_FAIL_SUPPORT_WORKING);
+			return false;
+		}
+
 	}
 	if (!CanAutopilot())
 		return false;
@@ -261,7 +280,7 @@ bool StartAutopilot()
 		Autopilot_flight_leader = Player_obj;
 	}

-	if (The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics])
+	if (The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS)
 		LockAPConv = timestamp(); // lock convergence instantly
 	else
 		LockAPConv = timestamp(3000); // 3 seconds before we lock convergence
@@ -300,7 +319,7 @@ bool StartAutopilot()


 	// instantly turn player toward tpos
-	if (The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics])
+	if (The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS)
 	{
 		vm_vec_sub(&norm1, Navs[CurrentNav].GetPosition(), &Player_obj->pos);
 		vm_vector_2_matrix(&Player_obj->orient, &norm1, NULL, NULL);
@@ -309,8 +328,8 @@ bool StartAutopilot()
 	for (i = 0; i < MAX_SHIPS; i++)
 	{
 		if (Ships[i].objnum != -1 && 
-				(Ships[i].flags[Ship::Ship_Flags::Navpoint_carry] || 
-					(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags[Ship::Wing_Flags::Nav_carry])
+				(Ships[i].flags2 & SF2_NAVPOINT_CARRY || 
+					(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags & WF_NAV_CARRY)
 				)
 			)
 		{
@@ -320,7 +339,7 @@ bool StartAutopilot()
 	}

 	// damp speed_cap to 90% of actual -- to make sure ships stay in formation
-	if (The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics])
+	if (The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS)
 		speed_cap = 0.90f * speed_cap;

 	if ( speed_cap < 1.0f ) {
@@ -342,27 +361,29 @@ bool StartAutopilot()
 	for (i = 0; i < MAX_SHIPS; i++)
 	{
 		if (Ships[i].objnum != -1 && 
-				(Ships[i].flags[Ship::Ship_Flags::Navpoint_carry] || 
-					(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags[Ship::Wing_Flags::Nav_carry])
+				(Ships[i].flags2 & SF2_NAVPOINT_CARRY || 
+					(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags & WF_NAV_CARRY)
 				)
 			)
 		{
 			// do we have capital ships in the area?
-            if (Ship_info[Ships[i].ship_info_index].is_big_ship() || Ship_info[Ships[i].ship_info_index].flags[Ship::Info_Flags::Capital] || Ship_info[Ships[i].ship_info_index].flags[Ship::Info_Flags::Supercap])
+			if (Ship_info[Ships[i].ship_info_index].flags 
+				& ( SIF_CRUISER | SIF_CAPITAL | SIF_SUPERCAP | SIF_CORVETTE | SIF_AWACS | SIF_GAS_MINER | SIF_FREIGHTER | SIF_TRANSPORT))
 			{
 				capshipPresent = true;

-				capIndexes.push_back(i);
+				capIndexes.resize(capIndexes.size()+1);
+				capIndexes[capIndexes.size()-1] = i;
 				// ok.. what size class

-                if (Ship_info[Ships[i].ship_info_index].flags[Ship::Info_Flags::Capital] || Ship_info[Ships[i].ship_info_index].flags[Ship::Info_Flags::Supercap])
-                {
-                    capship_counts[0]++;
-                    if (capship_spreads[0] < Objects[Ships[i].objnum].radius)
-                        capship_spreads[0] = Objects[Ships[i].objnum].radius;
-                }
-                else if (Ship_info[Ships[i].ship_info_index].flags[Ship::Info_Flags::Corvette])
-                {
+				if (Ship_info[Ships[i].ship_info_index].flags & (SIF_CAPITAL | SIF_SUPERCAP))
+				{
+					capship_counts[0]++;
+					if (capship_spreads[0] < Objects[Ships[i].objnum].radius)
+						capship_spreads[0] = Objects[Ships[i].objnum].radius;
+				}
+				else if (Ship_info[Ships[i].ship_info_index].flags & (SIF_CORVETTE))
+				{
 					capship_counts[1]++;
 					if (capship_spreads[1] < Objects[Ships[i].objnum].radius)
 						capship_spreads[1] = Objects[Ships[i].objnum].radius;
@@ -390,15 +411,15 @@ bool StartAutopilot()
 				radius = Objects[Ships[i].objnum].radius;
 			}

-			if (The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics])
+			if (The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS)
 			{// instantly turn the ship to match the direction player is looking
 				//vm_vec_sub(&norm1, Navs[CurrentNav].GetPosition(), &Player_obj->pos);
 				vm_vector_2_matrix(&Objects[Ships[i].objnum].orient, &norm1, NULL, NULL);
 			}

 			// snap wings into formation
-			if (The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics] &&  // only if using cinematics 
-				(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags[Ship::Wing_Flags::Nav_carry]) // only if in a wing
+			if (The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS &&  // only if using cinematics 
+				(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags & WF_NAV_CARRY) // only if in a wing
 				&& Autopilot_flight_leader != &Objects[Ships[i].objnum]) //only if not flight leader's object
 			{	
 				ai_info	*aip = &Ai_info[Ships[i].ai_index];
@@ -409,7 +430,7 @@ bool StartAutopilot()
 				if (leader_objp != &Objects[Ships[i].objnum])
 				{
 					// not leader.. get our position relative to leader
-					get_absolute_wing_pos_autopilot(&goal_point, leader_objp, wing_index, aip->ai_flags[AI::AI_Flags::Formation_object]);
+					get_absolute_wing_pos_autopilot(&goal_point, leader_objp, wing_index, aip->ai_flags & AIF_FORMATION_OBJECT);
 				}
 				else
 				{
@@ -444,10 +465,8 @@ bool StartAutopilot()
 				}
 			}
 			// lock primary and secondary weapons
-            if (LockWeaponsDuringAutopilot) { 
-                Ships[i].flags.set(Ship::Ship_Flags::Primaries_locked);
-                Ships[i].flags.set(Ship::Ship_Flags::Secondaries_locked);
-            }
+			if ( LockWeaponsDuringAutopilot )
+				Ships[i].flags2 |= (SF2_PRIMARIES_LOCKED | SF2_SECONDARIES_LOCKED);

 			// clear the ship goals and cap the waypoint speed
 			ai_clear_ship_goals(&Ai_info[Ships[i].ai_index]);
@@ -455,11 +474,11 @@ bool StartAutopilot()

 			
 			// if they're not part of a wing set their goal
-			if (Ships[i].wingnum == -1 || The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics])
+			if (Ships[i].wingnum == -1 || The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS)
 			{ 
 				if (Navs[CurrentNav].flags & NP_WAYPOINT)
 				{
-					ai_add_ship_goal_player( AIG_TYPE_PLAYER_SHIP, AI_GOAL_WAYPOINTS_ONCE, 0, ((waypoint_list*)Navs[CurrentNav].target_obj)->get_name(), &Ai_info[Ships[i].ai_index] );
+					ai_add_ship_goal_player( AIG_TYPE_PLAYER_SHIP, AI_GOAL_WAYPOINTS_ONCE, 0, ((waypoint_list*)Navs[CurrentNav].target_obj)->name, &Ai_info[Ships[i].ai_index] );
 					//fixup has to wait until after wing goals
 				}
 				else
@@ -472,11 +491,11 @@ bool StartAutopilot()
 	}

 	// assign wing goals
-	if (!(The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics]))
+	if (!(The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS))
 	{
 		for (i = 0; i < MAX_WINGS; i++)
 		{
-			if (Wings[i].flags[Ship::Wing_Flags::Nav_carry] )
+			if (Wings[i].flags & WF_NAV_CARRY )
 			{	
 				//ai_add_ship_goal_player( int type, int mode, int submode, char *shipname, ai_info *aip );

@@ -488,7 +507,7 @@ bool StartAutopilot()
 				if (Navs[CurrentNav].flags & NP_WAYPOINT)
 				{
 					
-					ai_add_wing_goal_player( AIG_TYPE_PLAYER_WING, AI_GOAL_WAYPOINTS_ONCE, 0, ((waypoint_list*)Navs[CurrentNav].target_obj)->get_name(), i );
+					ai_add_wing_goal_player( AIG_TYPE_PLAYER_WING, AI_GOAL_WAYPOINTS_ONCE, 0, ((waypoint_list*)Navs[CurrentNav].target_obj)->name, i );

 					// "fix up" the goal
 					for (j = 0; j < MAX_AI_GOALS; j++)
@@ -514,8 +533,8 @@ bool StartAutopilot()
 	{
 		if (Ships[i].objnum != -1)
 		{
-			if (Ships[i].flags[Ship::Ship_Flags::Navpoint_carry] || 
-				(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags[Ship::Wing_Flags::Nav_carry]))
+			if (Ships[i].flags2 & SF2_NAVPOINT_CARRY || 
+				(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags & WF_NAV_CARRY))
 				for (j = 0; j < MAX_AI_GOALS; j++)
 				{
 					if (Ai_info[Ships[i].ai_index].goals[j].ai_mode == AI_GOAL_WAYPOINTS_ONCE ||
@@ -533,20 +552,20 @@ bool StartAutopilot()
 	start_dist = DistanceTo(CurrentNav);

 	// ----------------------------- setup cinematic -----------------------------
-	if (The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics])
+	if (The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS)
 	{	
 		if (capshipPresent)
 		{
 			// position capships

 			vec3d right, front, up, offset;
-			for (SCP_vector<int>::iterator idx = capIndexes.begin(); idx != capIndexes.end(); ++idx)
+			for (i = 0; i < (int)capIndexes.size(); i++)
 			{
 				vm_vec_add(&right, &Autopilot_flight_leader->orient.vec.rvec, &zero);
 				vm_vec_add(&front, &Autopilot_flight_leader->orient.vec.fvec, &zero);
 				vm_vec_add(&up, &Autopilot_flight_leader->orient.vec.uvec, &zero);
 				vm_vec_add(&offset, &zero, &zero);
-                if (Ship_info[Ships[*idx].ship_info_index].flags[Ship::Info_Flags::Capital] || Ship_info[Ships[*idx].ship_info_index].flags[Ship::Info_Flags::Supercap])
+				if (Ship_info[Ships[capIndexes[i]].ship_info_index].flags & (SIF_CAPITAL | SIF_SUPERCAP))
 				{
 					//0 - below - three lines of position

@@ -580,7 +599,7 @@ bool StartAutopilot()

 					capship_placed[0]++;
 				}
-                else if (Ship_info[Ships[*idx].ship_info_index].flags[Ship::Info_Flags::Corvette])
+				else if (Ship_info[Ships[capIndexes[i]].ship_info_index].flags & SIF_CORVETTE)
 				{
 					//1 above - 3 lines of position
 					// front/back to zero
@@ -689,11 +708,11 @@ bool StartAutopilot()
 				// global scale the position by 50%
 				//vm_vec_scale(&offset, 1.5);

-				vm_vec_add(&Objects[Ships[*idx].objnum].pos, &Autopilot_flight_leader->pos, &offset);
+				vm_vec_add(&Objects[Ships[capIndexes[i]].objnum].pos, &Autopilot_flight_leader->pos, &offset);

-				if (vm_vec_dist_quick(&Autopilot_flight_leader->pos, &Objects[Ships[*idx].objnum].pos) > distance)
+				if (vm_vec_dist_quick(&Autopilot_flight_leader->pos, &Objects[Ships[i].objnum].pos) > distance)
 				{
-					distance = vm_vec_dist_quick(&Autopilot_flight_leader->pos, &Objects[Ships[*idx].objnum].pos);
+					distance = vm_vec_dist_quick(&Autopilot_flight_leader->pos, &Objects[Ships[i].objnum].pos);
 				}
 			}
 		}
@@ -871,7 +890,7 @@ void EndAutoPilot()
 	if (Navs[CurrentNav].flags & NP_WAYPOINT)
 	{
 		goal = AI_GOAL_WAYPOINTS_ONCE;
-		goal_name = ((waypoint_list*)Navs[CurrentNav].target_obj)->get_name();
+		goal_name = ((waypoint_list*)Navs[CurrentNav].target_obj)->name;
 	}
 	else
 	{
@@ -889,16 +908,14 @@ void EndAutoPilot()
 	{
 		if (Ships[i].objnum != -1 && 
 			(
-				Ships[i].flags[Ship::Ship_Flags::Navpoint_carry] || 
-				(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags[Ship::Wing_Flags::Nav_carry] )
+				Ships[i].flags2 & SF2_NAVPOINT_CARRY || 
+				(Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags & WF_NAV_CARRY )
 			 )
 		   )
 		{
 			//unlock their weaponry
-            if (LockWeaponsDuringAutopilot) {
-                Ships[i].flags.remove(Ship::Ship_Flags::Primaries_locked);
-                Ships[i].flags.remove(Ship::Ship_Flags::Secondaries_locked);
-            }
+			if ( LockWeaponsDuringAutopilot )
+				Ships[i].flags2 &= ~(SF2_PRIMARIES_LOCKED | SF2_SECONDARIES_LOCKED);
 			Ai_info[Ships[i].ai_index].waypoint_speed_cap = -1; // uncap their speed
 			Ai_info[Ships[i].ai_index].mode = AIM_NONE; // make AI re-evaluate current ship mode

@@ -906,7 +923,7 @@ void EndAutoPilot()
 			{
 				ai_goal *aigp = &Ai_info[Ships[i].ai_index].goals[j];
 	
-				if ( ((aigp->target_name != NULL) && !stricmp(aigp->target_name, goal_name))
+				if ( ((aigp->ship_name != NULL) && !stricmp(aigp->ship_name, goal_name))
 							&& (aigp->ai_mode == goal) )
 				{
 					ai_remove_ship_goal(&Ai_info[Ships[i].ai_index], j);
@@ -919,13 +936,13 @@ void EndAutoPilot()
 				{
 					ai_goal *aigp = &Wings[Ships[i].wingnum].ai_goals[j];

-					if ( ((aigp->target_name != NULL) && !stricmp(aigp->target_name, goal_name))
+					if ( ((aigp->ship_name != NULL) && !stricmp(aigp->ship_name, goal_name))
 							&& (aigp->ai_mode == goal) )
 					{
 						aigp->ai_mode = AI_GOAL_NONE;
 						aigp->signature = -1;
 						aigp->priority = -1;
-						aigp->flags.reset();
+						aigp->flags = 0;
 					}
 				}
 			}
@@ -933,23 +950,23 @@ void EndAutoPilot()
 	}

 	// un-assign wing goals
-	if ( !(The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics]) )
+	if ( !(The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS) )
 	{
 		for (i = 0; i < MAX_WINGS; i++)
 		{
-			if (Wings[i].flags[Ship::Wing_Flags::Nav_carry] )
+			if (Wings[i].flags & WF_NAV_CARRY )
 			{
 				for (j = 0; j < MAX_AI_GOALS; j++)
 				{
 					ai_goal *aigp = &Wings[i].ai_goals[j];

-					if ( ((aigp->target_name != NULL) && !stricmp(aigp->target_name, goal_name))
+					if ( ((aigp->ship_name != NULL) && !stricmp(aigp->ship_name, goal_name))
 							&& (aigp->ai_mode == goal) )
 					{
 						aigp->ai_mode = AI_GOAL_NONE;
 						aigp->signature = -1;
 						aigp->priority = -1;
-						aigp->flags.reset();
+						aigp->flags = 0;
 					}
 				}
 			}
@@ -1018,8 +1035,8 @@ void nav_warp(bool prewarp=false)
 	for (int i = 0; i < MAX_SHIPS; i++)
 	{
 		if (Ships[i].objnum != -1
-			&& (Ships[i].flags[Ship::Ship_Flags::Navpoint_carry] 
-				|| (Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags[Ship::Wing_Flags::Nav_carry])))
+			&& (Ships[i].flags2 & SF2_NAVPOINT_CARRY 
+				|| (Ships[i].wingnum != -1 && Wings[Ships[i].wingnum].flags & WF_NAV_CARRY)))
 		{
 				vm_vec_add(&Objects[Ships[i].objnum].pos, &Objects[Ships[i].objnum].pos, &targetPos);
 				Objects[Ships[i].objnum].phys_info.vel = velocity;
@@ -1027,7 +1044,8 @@ void nav_warp(bool prewarp=false)
 	}

 	// retime all collision pairs
-	obj_collide_retime_cached_pairs();
+	obj_all_collisions_retime();
+
 }

 // ********************************************************************************************
@@ -1042,7 +1060,7 @@ void NavSystem_Do()
 	{
 		if (AutoPilotEngaged)
 		{
-			if (The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics])
+			if (The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS)
 			{
 				camera *cam = nav_get_set_camera();
 				if (CinematicStarted)
@@ -1121,7 +1139,7 @@ void NavSystem_Do()
 	}

 	// ramp time compression - only if not using cinematics
-	if (AutoPilotEngaged && !(The_mission.flags[Mission::Mission_Flags::Use_ap_cinematics]))
+	if (AutoPilotEngaged && !(The_mission.flags & MISSION_FLAG_USE_AP_CINEMATICS))
 	{
 		int dstfrm_start = start_dist - DistanceTo(CurrentNav);

@@ -1166,14 +1184,14 @@ void NavSystem_Do()
 	*/
 	for (int i = 0; i < MAX_SHIPS; i++)
 	{
-		if (Ships[i].objnum != -1 && Ships[i].flags[Ship::Ship_Flags::Navpoint_needslink])
+		if (Ships[i].objnum != -1 && Ships[i].flags2 & SF2_NAVPOINT_NEEDSLINK)
 		{
 			object *other_objp = &Objects[Ships[i].objnum];

 			if (vm_vec_dist_quick(&Player_obj->pos, &other_objp->pos) < (NavLinkDistance + other_objp->radius))
 			{
-                Ships[i].flags.remove(Ship::Ship_Flags::Navpoint_needslink);
-                Ships[i].flags.set(Ship::Ship_Flags::Navpoint_carry);
+				Ships[i].flags2 &= ~SF2_NAVPOINT_NEEDSLINK;
+				Ships[i].flags2 |= SF2_NAVPOINT_CARRY;
 				
 				send_autopilot_msgID(NP_MSG_MISC_LINKED);
 			}
@@ -1185,7 +1203,7 @@ void NavSystem_Do()

 void send_autopilot_msgID(int msgid)
 {
-	if (msgid < 0 || msgid >= NP_NUM_MESSAGES)
+	if (msgid < 0 || msgid > NP_NUM_MESSAGES)
 		return;

 	send_autopilot_msg(NavMsgs[msgid].message, NavMsgs[msgid].filename);
@@ -1201,11 +1219,11 @@ void send_autopilot_msg(char *msg, char *snd)
 		audio_handle = -1;
 	}

-	if (msg[0] != '\0' && strcmp(msg, "none") != 0)
+	if (strlen(msg) != 0 && strcmp(msg, "none"))
 		change_message("autopilot builtin message", msg, -1, 0);

 	// load sound
-	if ((snd != NULL) && (snd[0] != '\0' && !strcmp(snd, "none")))
+	if (snd != NULL || strlen(snd) == 0 || !strcmp(snd, "none"))
 	{
 		audio_handle = audiostream_open(snd, ASF_MENUMUSIC );
 	}
@@ -1216,7 +1234,7 @@ void send_autopilot_msg(char *msg, char *snd)
 		audiostream_play(audio_handle, (Master_event_music_volume * aav_music_volume), 0);
 	}

-	if (msg[0] != '\0' && strcmp(msg, "none") != 0)
+	if (strlen(msg) != 0 && strcmp(msg, "none"))
 		message_training_queue("autopilot builtin message", timestamp(0), 5); // display message for five seconds
 }

@@ -1224,9 +1242,7 @@ void send_autopilot_msg(char *msg, char *snd)
 // Inits the Nav System
 void NavSystem_Init()
 {
-	for (int i = 0; i < MAX_NAVPOINTS; i++)
-		Navs[i].clear();
-
+	memset((char *)&Navs, 0, sizeof(Navs));
 	AutoPilotEngaged = false;
 	CurrentNav = -1;
 	audio_handle = -1;
@@ -1242,71 +1258,77 @@ void NavSystem_Init()

 // ********************************************************************************************

-void parse_autopilot_table(const char *filename)
+void parse_autopilot_table(char *filename)
 {
-	SCP_vector<SCP_string> lines;
+	int rval;
+	SCP_vector<std::string> lines;

-	try
+	// open localization
+	lcl_ext_open();
+
+	if ((rval = setjmp(parse_abort)) != 0)
 	{
-		if (filename == NULL)
-			read_file_text_from_default(defaults_get_file("autopilot.tbl"));
-		else
-			read_file_text(filename, CF_TYPE_TABLES);
-
-		reset_parse();
-
-
-		required_string("#Autopilot");
-
-		// autopilot link distance
-		required_string("$Link Distance:");
-		stuff_int(&NavLinkDistance);
-
-		if (optional_string("$Interrupt autopilot if enemy within distance:"))
-			stuff_int(&AutopilotMinEnemyDistance);
-		else
-			AutopilotMinEnemyDistance = 5000;
-
-		if (optional_string("$Interrupt autopilot if asteroid within distance:"))
-			stuff_int(&AutopilotMinAsteroidDistance);
-		else
-			AutopilotMinAsteroidDistance = 1000;
-
-		if (optional_string("$Lock Weapons During Autopilot:"))
-			stuff_boolean(&LockWeaponsDuringAutopilot);
-		else
-			LockWeaponsDuringAutopilot = false;
-
-		// optional no cutscene bars
-		if (optional_string("+No_Cutscene_Bars"))
-			UseCutsceneBars = false;
-		// optional no cutscene bars
-		if (optional_string("+No_Autopilot_Interrupt"))
-			Cmdline_autopilot_interruptable = 0;
-
-		// No Nav selected message
-		const char *msg_tags[] = { "$No Nav Selected:", "$Gliding:",
-			"$Too Close:", "$Hostiles:", "$Linked:", "$Hazard:",
-			"$Support Present:", "$Support Working:" };
-		for (int i = 0; i < NP_NUM_MESSAGES; i++)
-		{
-			required_string(msg_tags[i]);
-
-			required_string("+Msg:");
-			stuff_string(NavMsgs[i].message, F_MESSAGE, 256);
-
-			required_string("+Snd File:");
-			stuff_string(NavMsgs[i].filename, F_NAME, 256);
-		}
-
-
-		required_string("#END");
-	}
-	catch (const parse::ParseException& e)
-	{
-		mprintf(("TABLES: Unable to parse '%s'!  Error message = %s.\n", (filename) ? filename : "<default autopilot.tbl>", e.what()));
+		mprintf(("TABLES: Unable to parse '%s'!  Error code = %i.\n", (filename) ? filename : "<default autopilot.tbl>", rval));
+		lcl_ext_close();
 		return;
 	}
+
+	if (filename == NULL)
+		read_file_text_from_array(defaults_get_file("autopilot.tbl"));
+	else
+		read_file_text(filename, CF_TYPE_TABLES);
+
+	reset_parse();		
+
+	
+	required_string("#Autopilot");
+
+	// autopilot link distance
+	required_string("$Link Distance:");
+	stuff_int(&NavLinkDistance);
+
+	if (optional_string("$Interrupt autopilot if enemy within distance:"))
+		stuff_int(&AutopilotMinEnemyDistance);
+	else
+		AutopilotMinEnemyDistance = 5000;
+
+	if (optional_string("$Interrupt autopilot if asteroid within distance:"))
+		stuff_int(&AutopilotMinAsteroidDistance);
+	else
+		AutopilotMinAsteroidDistance = 1000;
+
+	if (optional_string("$Lock Weapons During Autopilot:"))
+		stuff_boolean(&LockWeaponsDuringAutopilot);
+	else
+		LockWeaponsDuringAutopilot = false;
+
+	// optional no cutscene bars
+	if (optional_string("+No_Cutscene_Bars"))
+		UseCutsceneBars = false;
+	// optional no cutscene bars
+	if (optional_string("+No_Autopilot_Interrupt"))
+		Cmdline_autopilot_interruptable = 0;
+
+	// No Nav selected message
+	char *msg_tags[] = { "$No Nav Selected:", "$Gliding:",
+		"$Too Close:", "$Hostiles:", "$Linked:", "$Hazard:",
+		"$Support Present:", "$Support Working:" };
+	for (int i = 0; i < NP_NUM_MESSAGES; i++)
+	{
+		required_string(msg_tags[i]);
+		
+		required_string("+Msg:");
+		stuff_string(NavMsgs[i].message, F_MESSAGE, 256);
+
+		required_string("+Snd File:");
+		stuff_string(NavMsgs[i].filename, F_NAME, 256);
+	}
+
+
+	required_string("#END");
+
+	// close localization
+	lcl_ext_close();
 }


@@ -1316,13 +1338,20 @@ int FindNav(char *Nav)
 {
 	for (int i = 0; i < MAX_NAVPOINTS; i++)
 	{
-		if (!stricmp(Navs[i].m_NavName, Nav))
+		if (!stricmp(Navs[i].NavName, Nav))
 			return i;
 	}

 	return -1;
 }

+// ********************************************************************************************
+// Set A Nav point to "ZERO"
+void ZeroNav(int i)
+{
+	memset((char *)&Navs[i], 0, sizeof(NavPoint));
+}
+
 // ********************************************************************************************
 // Removes a Nav
 bool DelNavPoint(char *Nav)
@@ -1333,6 +1362,7 @@ bool DelNavPoint(char *Nav)

 }

+
 bool DelNavPoint(int nav)
 {	
 	if (nav != -1)
@@ -1345,7 +1375,7 @@ bool DelNavPoint(int nav)
 			}

 		}
-		Navs[MAX_NAVPOINTS-1].clear();
+		ZeroNav(MAX_NAVPOINTS-1);
 		return true;
 	}

@@ -1373,7 +1403,7 @@ bool AddNav_Ship(char *Nav, char *TargetName, int flags)
 	// Create the NavPoint struct
 	NavPoint tnav;

-	strcpy_s(tnav.m_NavName, Nav);
+	strncpy(tnav.NavName, Nav, 32);
 	tnav.flags = NP_SHIP | flags;

 	Assert(!(tnav.flags & NP_WAYPOINT));
@@ -1419,12 +1449,20 @@ bool AddNav_Waypoint(char *Nav, char *WP_Path, int node, int flags)
 	// Create the NavPoint struct
 	NavPoint tnav;

-	strcpy_s(tnav.m_NavName, Nav);
+	strncpy(tnav.NavName, Nav, 32);
 	tnav.flags = NP_WAYPOINT | flags;

 	Assert(!(tnav.flags & NP_SHIP));

-	tnav.target_obj = find_matching_waypoint_list(WP_Path);
+
+	for (i = 0; i < Num_waypoint_lists; i++)
+	{
+		if (!stricmp(WP_Path, Waypoint_lists[i].name))
+		{
+			tnav.target_obj = (void *)&Waypoint_lists[i];		
+		}
+	}
+
 	tnav.waypoint_num = node;

 	// copy it into it's location
@@ -1434,6 +1472,22 @@ bool AddNav_Waypoint(char *Nav, char *WP_Path, int node, int flags)
 }

 // ********************************************************************************************
+//Change Flags
+bool Nav_Alt_Flags(char *Nav, int flags)
+{
+	flags &= ~NP_VALIDTYPE; //clear the NP_SHIP and NP_WAYPOINT bits, make sure they haven't been set
+
+	int nav = FindNav(Nav);
+
+	if (nav != -1)
+	{
+		Navs[nav].flags &= NP_VALIDTYPE; // Clear all bits BUT NP_SHIP or NO_WAYPOINT
+		Navs[nav].flags |= flags; // merge
+	}
+
+	return (nav != -1);
+}
+
 //Get Flags
 int Nav_Get_Flags(char *Nav)
 {
@@ -1526,23 +1580,7 @@ bool Nav_UnSet_Visited(char *Nav)
 	return Nav_UnSet_Flag(Nav, NP_VISITED);
 }

-// ********************************************************************************************
-// Selects a navpoint by name.
-void SelectNav(char *Nav)
-{
-	for (int i = 0; i < MAX_NAVPOINTS; i++)
-	{
-		if (!stricmp(Navs[i].m_NavName, Nav))
-			if (!(Nav_Get_Flags(Nav) & NP_HIDDEN || Nav_Get_Flags(Nav) & NP_NOACCESS)) CurrentNav = i;
-	}
-}

-// ********************************************************************************************
-// Deselects any navpoint selected.
-void DeselectNav()
-{
-  CurrentNav = 0;
-}

 //+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

@@ -1556,7 +1594,7 @@ unsigned int DistanceTo(char *nav)

 unsigned int DistanceTo(int nav)
 {
-	if (nav >= MAX_NAVPOINTS || nav < 0)
+	if (nav >= MAX_NAVPOINTS && nav < 0)
 		return 0xFFFFFFFF;

 	return (uint)vm_vec_dist_quick(&Player_obj->pos, Navs[nav].GetPosition());
@@ -1573,7 +1611,7 @@ bool IsVisited(char *nav)

 bool IsVisited(int nav)
 {
-	if (nav >= MAX_NAVPOINTS || nav < 0)
+	if (nav >= MAX_NAVPOINTS && nav < 0)
 		return 0;

 	if (Navs[nav].flags & NP_VISITED)
@@ -9,7 +9,6 @@

 #include "globalincs/pstypes.h"
 #include "object/object.h"
-
 #include <map>

 // milliseconds between updates
@@ -17,8 +16,8 @@

 #define MAX_NAVPOINTS	8

-#define NP_WAYPOINT		0x0001 // Nav Point is bound to the position of a single node of a waypoint path
-#define NP_SHIP			0x0002 // Nav Point is bound to the position of a certain ship 
+#define NP_WAYPOINT		0x0001 // Nav Point is bound to the poistion of a single node of a waypoint path
+#define NP_SHIP			0x0002 // Nav Point is bound to the poisiton of a certain ship 
 #define NP_HIDDEN		0x0004 // Nav Point doesn't show on map and isn't selectable
 #define NP_NOACCESS		0x0008 // Nav Point isn't selectable
 #define NP_VISITED		0x0100 // Whether we've been within 1,000 meters of this waypoint
@@ -26,25 +25,16 @@
 #define NP_NOSELECT		( NP_HIDDEN | NP_NOACCESS )
 #define NP_VALIDTYPE	( NP_WAYPOINT | NP_SHIP )

-class NavPoint 
+struct NavPoint 
 {
-public:
-	char m_NavName[32];
+	char NavName[32];
 	int flags;

 	void *target_obj;
 	int waypoint_num; //only used when flags & NP_WAYPOINT

 	vec3d *GetPosition();
-
-	void clear()
-	{
-		m_NavName[0] = 0;
-		flags = 0;
-
-		target_obj = NULL;
-		waypoint_num = -1;
-	}
+	char* GetInteralName();
 };


@@ -69,7 +59,7 @@ extern int CurrentNav;
 extern NavPoint Navs[MAX_NAVPOINTS];
 extern NavMessage NavMsgs[NP_NUM_MESSAGES];
 extern int LockAPConv;
-extern SCP_map<int,int> autopilot_wings;
+extern std::map<int,int> autopilot_wings;

 // Cycles through the NavPoint List
 bool Sel_NextNav();
@@ -93,7 +83,7 @@ inline bool CanAutopilot(bool send_msg=false) { return CanAutopilot(Player_obj->
 //        * Checks if Autopilot is allowed.  See CanAutopilot() for conditions.
 //        * Control switched from player to AI
 //        * Time compression to 32x
-//        * Tell AI to fly to targeted Nav Point (for all nav-status wings/ships)
+//        * Tell AI to fly to targetted Nav Point (for all nav-status wings/ships)
 //        * Sets max waypoint speed to the best-speed of the slowest ship tagged
 // Returns false if autopilot cannot be started. True otherwise.
 bool StartAutopilot();
@@ -117,16 +107,13 @@ void NavSystem_Do();
 void NavSystem_Init();

 // parse autopilot.tbl
-void parse_autopilot_table(const char *filename);
+void parse_autopilot_table(char *filename);

 // Finds a Nav point by name
 int FindNav(char *Nav);

-// Selects a Nav point by name
-void SelectNav(char *Nav);
-
-// Deselects any navpoint selected.
-void DeselectNav();
+// Set A Nav point to "ZERO"
+void ZeroNav(int i);

 // Removes a Nav
 bool DelNavPoint(char *Nav);
@@ -136,6 +123,9 @@ bool DelNavPoint(int nav);
 bool AddNav_Ship(char *Nav, char *TargetName, int flags); 
 bool AddNav_Waypoint(char *Nav, char *WP_Path, int node, int flags);

+//Change Flags
+bool Nav_Alt_Flags(char *Nav, int flags);
+
 // Sexp Accessors
 bool Nav_Set_Flag(char *Nav, int flag);
 bool Nav_UnSet_Flag(char *Nav, int flag);
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) Volition, Inc. 1999.  All rights reserved.
- *
- * All source code herein is the property of Volition, Inc. You may not sell
- * or otherwise commercially exploit the source or things you created based on the
- * source.
- *
- */
-
-/**
- * @file bm_examples.cpp
- * This file contains example code for using bmpman.
- */
-
-#include "bmpman/bmpman.h"
-#include "graphics/2d.h"
-
-void bm_create_example() {
-	static int test_inited = 0;
-	static int test_bmp;
-	static uint test_bmp_data[128 * 64];
-
-	if (!test_inited) {
-		test_inited = 1;
-		// Create the new bitmap and fill in its data.
-		// When you're done with it completely, call
-		// bm_release to free up the bitmap handle
-		test_bmp = bm_create(32, 128, 64, test_bmp_data);
-		int i, j;
-		for (i = 0; i < 64; i++) {
-			for (j = 0; j < 64; j++) {
-				uint r = i * 4;
-				test_bmp_data[j + i * 128] = r;
-			}
-		}
-	}
-
-	// page out the data, so that the next bm_lock will convert the new data to
-	// the correct bpp
-	bm_unload(test_bmp);
-
-	// put in new data
-	int x, y;
-	gr_reset_clip();
-	for (y = 0; y < 64; y++) {
-		for (x = 0; x < 128; x++) {
-			test_bmp_data[y * 128 + x] = 15;
-		}
-	}
-
-	// Draw the bitmap, the upper left corner is the origin (0, 0)
-	gr_set_bitmap(test_bmp);
-	gr_bitmap(0, 0);
-}
@@ -1,132 +1,131 @@
-#ifndef __BM_INTERNAL_H__
-#define __BM_INTERNAL_H__
 /*
-* Copyright (C) Volition, Inc. 1999.  All rights reserved.
-*
-* All source code herein is the property of Volition, Inc. You may not sell
-* or otherwise commercially exploit the source or things you created based on the
-* source.
-*
+ * Copyright (C) Volition, Inc. 1999.  All rights reserved.
+ *
+ * All source code herein is the property of Volition, Inc. You may not sell 
+ * or otherwise commercially exploit the source or things you created based on the 
+ * source.
+ *
 */

-/**
- * @file bm_internal.h
- * These are functions and types used by bmpman and a few others.
- *
- * @details It is a "protected" header that requires BMPMAN_INTERNAL to be defined before it can be included. This is to
- * provide a small measure of safety since this functions can cause problems if not used correctly
- */

-#ifndef BMPMAN_INTERNAL
-#error The file header "bmpman/bm_internal.h" is protected. Make sure you know what you are doing!
-#endif

+
+#ifndef __BM_INTERNAL_H__
+#define __BM_INTERNAL_H__
+
+
+// extra check to make sure this stuff doesn't end up in normal files
+// don't use any of this unless BMPMAN_INTERNAL is defined
+#ifdef BMPMAN_INTERNAL
+
+#include "globalincs/pstypes.h"
 #include "bmpman/bmpman.h"

-#include <array>

-/**
- * @brief Container class for graphics API specific bitmap data
- */
-class gr_bitmap_info {
- public:
-	virtual ~gr_bitmap_info() = 0;
-};
+// no-type			( used in: bm_bitmaps[i].type )
+#define BM_TYPE_NONE			0
+// in-memory type	( used in: bm_bitmaps[i].type )
+#define BM_TYPE_USER			1
+// file-type types	( used in: bm_bitmaps[i].type )
+#define BM_TYPE_PCX				2
+#define BM_TYPE_TGA				3		// 16 or 32 bit targa
+#define BM_TYPE_DDS				4		// generic identifier for DDS
+#define BM_TYPE_PNG				5		// PNG
+#define BM_TYPE_JPG				6		// 32 bit jpeg
+#define BM_TYPE_ANI				7		// in-house ANI format
+#define BM_TYPE_EFF				8		// specifies any type of animated image, the EFF itself is just text
+// c-type types		( used in: bm_bitmaps[i].c_type )
+#define BM_TYPE_DXT1			9		// 24 bit with switchable alpha		(compressed)
+#define BM_TYPE_DXT3			10		// 32 bit with 4 bit alpha			(compressed)
+#define BM_TYPE_DXT5			11		// 32 bit with 8 bit alpha			(compressed)
+#define BM_TYPE_CUBEMAP_DDS		12		// generic DDS cubemap	(uncompressed cubemap surface)
+#define BM_TYPE_CUBEMAP_DXT1	13		// 24-bit cubemap		(compressed cubemap surface)
+#define BM_TYPE_CUBEMAP_DXT3	14		// 32-bit cubemap		(compressed cubemap surface)
+#define BM_TYPE_CUBEMAP_DXT5	15		// 32-bit cubemap		(compressed cubemap surface)
+// special types	( used in: bm_bitmaps[i].type )
+#define BM_TYPE_RENDER_TARGET_STATIC	16		// 24/32 bit setup internally as a static render target
+#define BM_TYPE_RENDER_TARGET_DYNAMIC	17		// 24/32 bit setup internally as a dynamic render target

-union bm_extra_info {
+
+/// Moved from cpp file ///////////////////
+// Consider these 'protected' structures and functions that should only be used by special bitmap functions
+typedef union bm_extra_info {
 	struct {
 		// Stuff needed for animations
-		int first_frame;    //!< used for animations -- points to index of first frame
-		int num_frames;     //!< used for animations -- number of frames in the animation
-		int keyframe;       //!< used for animations -- keyframe info
-		float total_time;   //!< used for animations -- total animation time (not always derived from num_frames/fps)
-		ubyte fps;          //!< used for animations -- frames per second
-		bool is_array;      //!< Flag for if all frames of an animation have the same size which means that it can be put into a texture array
+		int		first_frame;								// used for animations -- points to index of first frame
+		int	num_frames;									// used for animation -- number of frames in the animation
+		ubyte	fps;										// used for animation -- frames per second
+		int	keyframe;									// used for animation -- keyframe info

 		struct {
 			// stuff for static animations
-			BM_TYPE type;                         //!< type for individual images
-			char  filename[MAX_FILENAME_LEN];   //!< filename for individual images
+			ubyte	type;									// type for individual images
+			char	filename[MAX_FILENAME_LEN];				// filename for individual images
 		} eff;
-		struct {
-			bool  is_apng;      //!< Is this animation an APNG?
-			float frame_delay;  //!< cumulative frame delay
-		} apng;
 	} ani;

 	struct {
 		// Stuff needed for user bitmaps
-		void* data;         //!< For user bitmaps, this is where the data comes from
-		ubyte bpp;          //!< For user bitmaps, this is what format the data is
-		ubyte flags;        //!< For user bitmaps, Flags passed to bm_create
+		void		*data;									// For user bitmaps, this is where the data comes from
+		ubyte		bpp;									// For user bitmaps, this is what format the data is
+		ubyte		flags;									// Flags passed to bm_create
 	} user;
-};
+} bm_extra_info;

-struct bitmap_entry {
+
+typedef struct bitmap_entry	{
 	// identification
-	char filename[MAX_FILENAME_LEN];    //!< filename for this bitmap
+	char		filename[MAX_FILENAME_LEN];			// filename for this bitmap

-	uint signature;         //!< a unique signature identifying the data
-	int  handle;            //!< Handle = id*MAX_BITMAPS + bitmapnum
+	uint		signature;									// a unique signature identifying the data
+	uint		palette_checksum;							// checksum used to be sure bitmap is in current palette
+	int		handle;										// Handle = id*MAX_BITMAPS + bitmapnum
+	int		last_used;									// When this bitmap was last used

-	BM_TYPE type;             //!< PCX, USER, ANI, etc
-	BM_TYPE comp_type;        //!< What sort of compressed type, BM_TYPE_NONE if not compressed
-	signed char ref_count;  //!< Number of locks on bitmap.  Can't unload unless ref_count is 0.
+	ubyte		type;									// PCX, USER, ANI, etc
+	ubyte		comp_type;								// What sort of compressed type, BM_TYPE_NONE if not compressed
+	signed char	ref_count;								// Number of locks on bitmap.  Can't unload unless ref_count is 0.

-	int dir_type;           //!< which directory this was loaded from (to skip other locations with same name)
+	int		dir_type;								// which directory this was loaded from (to skip other locations with same name)

 	// compressed bitmap stuff (.dds) - RT please take a look at this and tell me if we really need it
-	size_t mem_taken;          //!< How much memory does this bitmap use? - UnknownPlayer
-	int num_mipmaps;        //!< number of mipmap levels, we need to read all of them
+	int		mem_taken;									// How much memory does this bitmap use? - UnknownPlayer
+	int		num_mipmaps;								// number of mipmap levels, we need to read all of them

 	// Stuff to keep track of usage
-	ubyte preloaded;        //!< If set, then this was loaded from the lst file
-	int   preload_count;    //!< how many times this gets used in game, for unlocking
-	ubyte used_flags;       //!< What flags it was accessed thru
-	int   load_count;
+	ubyte		preloaded;									// If set, then this was loaded from the lst file
+	int			preload_count;								// how many times this gets used in game, for unlocking
+	ubyte		used_flags;									// What flags it was accessed thru
+	int			load_count;

-	bitmap bm;              //!< Bitmap info
+	// Bitmap info
+	bitmap	bm;

-	bm_extra_info info;     //!< Data for animations and user bitmaps
+	// Data for animations and user bitmaps
+	bm_extra_info	info;		

 #ifdef BMPMAN_NDEBUG
 	// bookeeping
-	ubyte used_last_frame;  // If set, then it was used last frame
-	ubyte used_this_frame;  // If set, then it was used this frame
-	size_t data_size;        // How much data this bitmap uses
-	int   used_count;       // How many times it was accessed
+	ubyte		used_last_frame;							// If set, then it was used last frame
+	ubyte		used_this_frame;							// If set, then it was used this frame
+	int		data_size;									// How much data this bitmap uses
+	int		used_count;									// How many times it was accessed
 #endif
-};
+} bitmap_entry;

-struct bitmap_slot {
-	bitmap_entry entry;
+extern bitmap_entry bm_bitmaps[MAX_BITMAPS];

-	gr_bitmap_info* gr_info = nullptr;
-};

 // image specific lock functions
-void bm_lock_ani( int handle, bitmap_slot *bs, bitmap *bmp, int bpp, ubyte flags );
-void bm_lock_dds( int handle, bitmap_slot *bs, bitmap *bmp, int bpp, ubyte flags );
-void bm_lock_png( int handle, bitmap_slot *bs, bitmap *bmp, int bpp, ubyte flags );
-void bm_lock_apng( int handle, bitmap_slot *bs, bitmap *bmp, int bpp, ubyte flags );
-void bm_lock_jpg( int handle, bitmap_slot *bs, bitmap *bmp, int bpp, ubyte flags );
-void bm_lock_pcx( int handle, bitmap_slot *bs, bitmap *bmp, int bpp, ubyte flags );
-void bm_lock_tga( int handle, bitmap_slot *bs, bitmap *bmp, int bpp, ubyte flags );
-void bm_lock_user( int handle, bitmap_slot *bs, bitmap *bmp, int bpp, ubyte flags );
+void bm_lock_ani( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
+void bm_lock_dds( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
+void bm_lock_png( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
+void bm_lock_jpg( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
+void bm_lock_pcx( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
+void bm_lock_tga( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
+void bm_lock_user( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );

-const size_t BM_BLOCK_SIZE = 4096;

-extern SCP_vector<std::array<bitmap_slot, BM_BLOCK_SIZE>> bm_blocks;
-
-bitmap_slot* bm_get_slot(int handle, bool separate_ani_frames = true);
-
-inline bitmap_entry* bm_get_entry(int handle, bool separate_ani_frames = true) {
-	return &bm_get_slot(handle, separate_ani_frames)->entry;
-}
-
-template<typename T>
-T* bm_get_gr_info(int handle, bool separate_ani_frames = true) {
-	return static_cast<T*>(bm_get_slot(handle, separate_ani_frames)->gr_info);
-}
+#endif // BMPMAN_INTERNAL

 #endif // __BM_INTERNAL_H__
@@ -1,675 +1,290 @@
-#ifndef _BMPMAN_H
-#define _BMPMAN_H
 /*
 * Copyright (C) Volition, Inc. 1999.  All rights reserved.
 *
- * All source code herein is the property of Volition, Inc. You may not sell
- * or otherwise commercially exploit the source or things you created based on the
+ * All source code herein is the property of Volition, Inc. You may not sell 
+ * or otherwise commercially exploit the source or things you created based on the 
 * source.
 *
- */
+*/ 

-/**
- * @file bmpman.h
- * Header file for the bitmap manager (bmpman)
- */

-/**
- * @example bm_examples.cpp
- * @brief This containes examples of bmpman usage
- */

-#include "cfile/cfile.h"
+#ifndef _BMPMAN_H
+#define _BMPMAN_H
+
 #include "globalincs/pstypes.h"
+#include "cfile/cfile.h"

 #ifndef NDEBUG
-#define BMPMAN_NDEBUG	//!< Enables BMPMAN debugging code
+#define BMPMAN_NDEBUG
 #endif

-/**
- * @defgroup BMPMAN_CONSTANTS Macro constants used in/with bmpman.h
- *
- * @{
- */

-// Flag positions for bitmap.flags
+// this is causing problems - let's UP IT -- Kazan
+// bumped from 3500 to 4500 2004/09/21 - taylor
+// bumped to 4750 2005/02/03 - taylor
+//#define MAX_BITMAPS 3500			// How many bitmaps the game can handle
+#define MAX_BITMAPS 4750			// How many bitmaps the game can handle
+// NOTE:  MAX_BITMAPS shouldn't need to be bumped again.  With the fixed bm_release() and it's
+// proper use even the largest missions should stay under this number.  With the largest retail
+// missions and wasteful content we should still have about 20% of the slots free.  If it still
+// goes over then it's something the artists need to fix.  For instance the Terran Mara fighter,
+// with -spec and -glow and using the Shinepack, needs 117 bitmap slots alone.  111 of those is
+// just for the glowmaps.  This number can be greatly reduced if the number of ani frames for
+// another LOD than LOD0 has fewer or no ani frames.  A 37 frame glow ani for LOD2 is little
+// more than a waste of resources.  Future reports of texture corruption should be initially
+// approached with content as the cause and not code.  If anything we could/should reduce
+// MAX_BITMAPS in the future.  Where it's at now should accomidate even the largest mods.
+//  --  Taylor
+
+
+#define	BMP_AABITMAP						(1<<0)				// antialiased bitmap
+#define	BMP_TEX_XPARENT						(1<<1)				// transparent texture
+#define	BMP_TEX_OTHER						(1<<2)				// so we can identify all "normal" textures
+#define BMP_TEX_DXT1						(1<<3)				// dxt1 compressed 8r8g8b1a (24bit)
+#define BMP_TEX_DXT3						(1<<4)				// dxt3 compressed 8r8g8b4a (32bit)
+#define BMP_TEX_DXT5						(1<<5)				// dxt5 compressed 8r8g8b8a (32bit)
+#define BMP_TEX_CUBEMAP						(1<<6)				// a texture made for cubic environment map
 // ***** NOTE:  bitmap.flags is an 8-bit value, no more BMP_TEX_* flags can be added unless the type is changed!! ******
-#define	BMP_AABITMAP        (1<<0)      //!< antialiased bitmap
-#define	BMP_TEX_XPARENT     (1<<1)      //!< transparent texture
-#define	BMP_TEX_OTHER       (1<<2)      //!< so we can identify all "normal" textures
-#define BMP_TEX_DXT1        (1<<3)      //!< dxt1 compressed 8r8g8b1a (24bit)
-#define BMP_TEX_DXT3        (1<<4)      //!< dxt3 compressed 8r8g8b4a (32bit)
-#define BMP_TEX_DXT5        (1<<5)      //!< dxt5 compressed 8r8g8b8a (32bit)
-#define BMP_TEX_CUBEMAP     (1<<6)      //!< a texture made for cubic environment map
-#define BMP_MASK_BITMAP     (1<<7)      //!< a bitmap that will be used for masking mouse interaction. Typically not used in render operations

-// Combined flags
-#define BMP_TEX_COMP        ( BMP_TEX_DXT1 | BMP_TEX_DXT3 | BMP_TEX_DXT5 )  //!< Compressed textures
-#define BMP_TEX_NONCOMP     ( BMP_TEX_XPARENT | BMP_TEX_OTHER )             //!< Non-compressed textures
-#define	BMP_TEX_ANY         ( BMP_TEX_COMP | BMP_TEX_NONCOMP )              //!< Any texture
+//compressed texture types
+#define BMP_TEX_COMP			( BMP_TEX_DXT1 | BMP_TEX_DXT3 | BMP_TEX_DXT5 )

-// Flag positions for bitmap.type
-#define BMP_FLAG_RENDER_TARGET_STATIC       (1<<0)      //!< Texture is a static type
-#define BMP_FLAG_RENDER_TARGET_DYNAMIC      (1<<1)      //!< Texture is a dynamic type (animation)
-#define BMP_FLAG_CUBEMAP                    (1<<2)      //!< Texture is a cubemap
+//non compressed textures
+#define BMP_TEX_NONCOMP			( BMP_TEX_XPARENT | BMP_TEX_OTHER )

-// Bitmap types
-enum BM_TYPE
-{
-	BM_TYPE_NONE = 0,   //!< No type
-	BM_TYPE_USER,       //!< in-memory
-	BM_TYPE_PCX,        //!< PCX
-	BM_TYPE_TGA,        //!< 16 or 32 bit targa
-	BM_TYPE_DDS,        //!< generic identifier for DDS
-	BM_TYPE_PNG,        //!< PNG
-	BM_TYPE_JPG,        //!< 32 bit jpeg
-	BM_TYPE_ANI,        //!< in-house ANI format
-	BM_TYPE_EFF,        //!< specifies any type of animated image, the EFF itself is just text
-
-	// special types
-	BM_TYPE_RENDER_TARGET_STATIC,   //!< 24/32 bit setup internally as a static render target
-	BM_TYPE_RENDER_TARGET_DYNAMIC,  //!< 24/32 bit setup internally as a dynamic render target
-
-	// Compressed types (bitmap.c_type)
-	BM_TYPE_DXT1,           //!< 24 bit with switchable alpha
-	BM_TYPE_DXT3,           //!< 32 bit with 4 bit alpha
-	BM_TYPE_DXT5,           //!< 32 bit with 8 bit alpha
-	BM_TYPE_CUBEMAP_DDS,    //!< generic DDS cubemap (uncompressed cubemap surface)
-	BM_TYPE_CUBEMAP_DXT1,   //!< 24-bit cubemap        (compressed cubemap surface)
-	BM_TYPE_CUBEMAP_DXT3,   //!< 32-bit cubemap        (compressed cubemap surface)
-	BM_TYPE_CUBEMAP_DXT5    //!< 32-bit cubemap        (compressed cubemap surface)
-};
-
-/**
- * @}
- */
-
-struct bitmap
-{
-	short	w;          //!< Width, in number of pixels
-	short	h;          //!< Height, in number of pixels
-	short	rowsize;    //!< What you need to add to go to next row
-	int	bpp;        //!< Requested bitdepth of each pixel. ( 7, 8, 15, 16, 24, 32)
-	int	true_bpp;   //!< The image's actual bitdepth
-	ubyte	flags;      //!< Various texture type flags. @see BMPMAN_CONSTANTS
-	ptr_u	data;       //!< Pointer to data, or maybe offset into VRAM.
-	ubyte *palette;     /**< @brief   Pointer to this bitmap's palette (if it has one).
-	                     *   @details If BMP_NO_PALETTE_MAP flag is cleared, this palette just points to the screen palette. (gr_palette)
-	                     */
-};
-
-// Forward definition for the graphics API
-struct bitmap_entry;
-struct bitmap_slot;
-
-extern size_t bm_texture_ram;  //!< how many bytes of textures are used.
-
-extern int Bm_paging;   //!< Bool type that indicates if BMPMAN is currently paging.
-
-extern const BM_TYPE bm_type_list[];       //!< List of valid bitmap types
-extern const char *bm_ext_list[];        //!< List of extensions for those types
-extern const int BM_NUM_TYPES;           //!< Calculated number of bitmap types
-extern const BM_TYPE bm_ani_type_list[];   //!< List of valid bitmap animation types
-extern const char *bm_ani_ext_list[];    //!< List of extensions for those types
-extern const int BM_ANI_NUM_TYPES;       //!< Calculated number of bitmap animation types
-
-extern int ENVMAP;      //!< References a map that is for environment mapping -Bobboau
-
-/**
- * @brief Initilizes the bitmap manager
- */
-void bm_init();
-
-/**
- * @brief Closes the bitmap manager, freeing any allocated memory used by bitmaps. Is called at program close.
- */
-void bm_close();
+// any texture type
+#define	BMP_TEX_ANY				( BMP_TEX_COMP | BMP_TEX_NONCOMP )

 #define BMP_FLAG_RENDER_TARGET_STATIC		(1<<0)
 #define BMP_FLAG_RENDER_TARGET_DYNAMIC		(1<<1)
 #define BMP_FLAG_CUBEMAP					(1<<2)
-#define BMP_FLAG_RENDER_TARGET_MIPMAP		(1<<3)

-/**
- * @brief Allocates memory for the given handle.
- *
- * @returns A pointer to the allocated vm if successful,
- * @returns Null, if unsuccessful
- *
- * @note z64 - This function looks fishy. Not only is handle not used in release builds, but bm_bitmaps[handle].size
- *   and bm_texture_size aren't modified unless this is a debug build
- */
-void *bm_malloc(int handle, size_t size);
+typedef struct bitmap {
+	short	w, h;		// Width and height
+	short	rowsize;	// What you need to add to go to next row
+	ubyte	bpp;		// How many bits per pixel it is. (7,8,15,16,24,32) (what is requested)
+	ubyte	true_bpp;	// How many bits per pixel the image actually is.
+	ubyte	flags;		// See the BMP_???? defines for values (this isn't for the BMP_FLAG_* stuff)
+	ptr_u	data;		// Pointer to data, or maybe offset into VRAM.
+	ubyte *palette;		// If bpp==8, this is pointer to palette.   If the BMP_NO_PALETTE_MAP flag
+						// is not set, this palette just points to the screen palette. (gr_palette)
+} bitmap;

-/**
- * @brief (DEBUG) Similar to bm_malloc, but only updates how much memory is used
- *
- * @note z64 - Also fishy (see bm_malloc)
- */
-void bm_update_memory_used(int n, size_t size);

-class bitmap_lookup {
-	ubyte *Bitmap_data;
+extern int Bm_paging;

-	int Width;
-	int Height;
-	int Num_channels;
+void bm_init();

-	float map_texture_address(float address);
-public:
-	bitmap_lookup(int bitmap_num);
-	~bitmap_lookup();
+void bm_close();

-	bool valid();
+int bm_get_cache_slot( int bitmap_id, int separate_ani_frames );

-	float get_channel_alpha(float u, float v);
-};
+int bm_get_next_handle();

-/**
- * @brief Loads a bitmap so we can draw with it later.
- *
- * @param filename
- *
- * @returns The bitmap number if successful, else
- * @returns a negative value if not
- */
-int bm_load(const char* filename);
+void *bm_malloc(int n, int size);

-/**
- * @brief Loads a bitmap so we can draw with it later. (Preferred version)
- *
- * @param filename
- *
- * @returns The bitmap number if successful, else
- * @returns a negative value if not
- */
-int bm_load(const SCP_string& filename);
+void bm_update_memory_used(int n, int size);

-/**
- * @brief Reloads a bitmap as a duplicate.
- *
- * @details This function basically allows you to load a bitmap which already exists (by filename). This is useful
- *   because in some cases we need to have a bitmap which is locked in screen format _and_ texture format, such as
- *   the pilot pics and squad logos
- *
- * @param filename
- *
- * @returns The bitmap number if successful, else
- * @returns a negative value if not
- */
-int bm_load_duplicate(const char *filename);
+// how many bytes of textures are used.
+extern int bm_texture_ram;

-/**
- * Loads a bitmap which exists somewhere in the RAM.
- *
- * @param bpp The bitdepth of the bitmap
- * @param w The width of the bitmap
- * @param h The height of the bitmap
- * @param[in] data The bitmap's data glob
- * @param flags
- *
- * @note The used RAM cannot be freed until bm_release is called on the created bitmap
- */
-int bm_create(int bpp, int w, int h, void *data = NULL, int flags = 0);
+// This loads a bitmap so we can draw with it later.
+// It returns a negative number if it couldn't load
+// the bitmap.   On success, it returns the bitmap
+// number.
+int bm_load(char * filename);

-/**
- * @brief Unloads a bitmap's data, but not the bitmap info
- *
- * @details The bm number (n) may be reused once this function has been called on it. However, it will have to be paged
- *   in the next time it is locked.
+// special load function. basically allows you to load a bitmap which already exists (by filename). 
+// this is useful because in some cases we need to have a bitmap which is locked in screen format
+// _and_ texture format, such as pilot pics and squad logos
+int bm_load_duplicate(char *filename);

- * @param handle                The index number of the bitmap to free
- * @param clear_render_targets  If true, release a render target
- * @param nodebug               If true, exclude certain debug messages
- *
- * @returns 0 if not successful,
- * @returns 1 if successful
- */
-int bm_unload(int handle, int clear_render_targets = 0, bool nodebug = false);
+// Creates a bitmap that exists in RAM somewhere, instead
+// of coming from a disk file.  You pass in a pointer to a
+// block of data.  The data can be in the following formats:
+// 8 bpp (mapped into game palette)
+// 32 bpp
+// On success, it returns the bitmap number.  You cannot 
+// free that RAM until bm_release is called on that bitmap.  
+// See example at bottom of this file
+int bm_create( int bpp, int w, int h, void *data = NULL, int flags = 0);

-/**
- * @brief Quickly unloads a bitmap's data, ignoring the load_count
- *
- * @details Similar to bm_unload(), except that it can be safely used to free data without worrying about load_count.
- *   It's safe to use in relation to bm_release() and in gr_*_texture functions
- *
- * @param handle                The bm number of the bitmap to free
- * @param clear_render_targets  If true, release a render target
- *
- * @note bm_free_data_fast() is used here and NOT bm_free_data()
- */
-int bm_unload_fast(int handle, int clear_render_targets = 0);
+// Frees up a bitmap's data, but bitmap number 'n' can
+// still be used, it will just have to be paged in next
+// time it is locked.
+int bm_unload( int n, int clear_render_targets = 0 );

-/**
- * @brief Frees both a bitmap's data and it's associated slot.
- *
- * @details Once called, the bm number 'n' cannot be used until bm_load or bm_create is re-inits the slot.
- *
- * @param handle               The index number of the bitmap to release
- * @param clear_render_targets If nonzero, also release render targets
- *
- * @returns 1 on success,
- * @returns 0 otherwise
- *
- * @note If the passed handle is that of an ANI, it frees EVERY frame. Be sure to only pass the handle of the first frame!
- *
- * @todo upgrade return type and clear_render_targets type to bools
- */
-int bm_release(int handle, int clear_render_targets = 0);
+// like bm_unload() except that it's safe to use to free data without worrying about
+// load_count so it's safe to use in relation to bm_release() and in gr_*_texture functions
+int bm_unload_fast( int n, int clear_render_targets = 0 );

-/**
- * @brief Loads a bitmap sequance so we can draw with it.
- *
- * @param[in] filename
- * @param[out] nframes          If non-null, set to the number of frames the animation has
- * @param[out] fps              If non-null, set to the fps of this animation
- * @param[out] keyframe         if non null, set to the keyframe index of this animation
- * @param[in] can_drop_frames   If set, allows dropped frames
- * @param[in] dir_type          Directory type
- *
- * @returns The bm number of the first bitmap in the sequence if successful, or
- * @returns A negative value if unsuccessful
- */
-int bm_load_animation(const char *filename, int *nframes = nullptr, int *fps = nullptr, int *keyframe = nullptr, float *total_time = nullptr, bool can_drop_frames = 0, int dir_type = CF_TYPE_ANY);
+// Frees up a bitmap's data, and it's slot, so bitmap 
+// number 'n' cannot be used anymore, and bm_load or
+// bm_create might reuse the slot.
+int bm_release( int n, int clear_render_targets = 0 );

-/**
- * @brief Loads either animation (bm_load_animation) or still image (bm_load)
- *
- * @param[in] filename
- * @param[out] nframes  If non-null and loading was successful, set to the number of frames the animation has
- * @param[out] fps      If non-null and loading was successful, set to the fps of this animation
- * @param[out] keyframe if non null and loading was successful, set to the keyframe index of this animation
- * @param[in] can_drop_frames
- * @param[in] dir_type
- *
- * @returns The bm number of the first bitmap in the sequence if successful, or
- * @returns A negative value if unsuccessful
- */
-int bm_load_either(const char *filename, int *nframes = NULL, int *fps = NULL, int *keyframe = NULL, bool can_drop_frames = false, int dir_type = CF_TYPE_ANY);
+// This loads a bitmap sequence so we can draw with it later.
+// It returns a negative number if it couldn't load
+// the bitmap.   On success, it returns the bitmap
+// number of the first frame and nframes is set.
+extern int bm_load_animation( char * filename, int * nframes = NULL, int *fps = NULL, int *keyframe = NULL, int can_drop_frames = 0, int dir_type = CF_TYPE_ANY );

-/**
- * @brief Locks down the bitmap indexed by bitmapnum.
- *
- * @details Also converts the bitmap to the appropriate format specified by bpp and flags. Only lock a bitmap when you
- *   need it!
- *
- * @param handle    The number indexing the desired bitmap
- * @param bpp       The desired bpp of the bitmep
- * @param flags     The desired bitmap format
- * @param nodebug
+//Loads either animation (bm_load_animation) or still image (bm_load)
+extern int bm_load_either(char *filename, int *nframes = NULL, int *fps = NULL, int *keyframe = NULL, int can_drop_frames = 0, int dir_type = CF_TYPE_ANY);

- * @returns A pointer to the bitmap that's valid until bm_unlock is called if successful, or
- * @returns NULL if unsuccessful
- */
-bitmap* bm_lock(int handle, int bpp, ubyte flags, bool nodebug = false);
+// This locks down a bitmap and returns a pointer to a bitmap
+// that can be accessed until you call bm_unlock.   Only lock
+// a bitmap when you need it!  This will convert it into the 
+// appropriate format also.
+extern bitmap * bm_lock( int bitmapnum, ubyte bpp, ubyte flags );

-/**
- * @brief Returns the image type of the given bitmap handle
- */
-BM_TYPE bm_get_type(int handle);
+// The signature is a field that gets filled in with 
+// a unique signature for each bitmap.  The signature for each bitmap
+// will also change when the bitmap's data changes.
+extern uint bm_get_signature( int bitmapnum);

-/**
- * @brief Unlocks a bitmap
- *
- * @details Decrements the ref_count member of the bitmap_entry struct, A bitmap can only be unloaded when the
- * ref_count is 0
- */
-void bm_unlock(int handle);
+//gets the image type
+ubyte bm_get_type(int handle);

-/**
- * @brief Checks if the bitmap indexed by handle is valid
- *
- * @details Some early known false or out of range handles (such as negative) are checked within
- * an initial routine pass, followed by a more thorough check routine to ensure the
- * series of bitmaps within the bm_bitmaps[] structure have not become invalid.
- *
- * @returns Nonzero if valid, else
- * @returns Zero otherwise
- *
- * @todo z64 - Returned value is essentially a bool type, need to check all caller functions to see if it can safely
- *   be updated to reflect this
- */
-int bm_is_valid(int handle);
+// Unlocks a bitmap
+extern void bm_unlock( int bitmapnum );

-/**
- * @brief Gets info on the bitmap indexed by handle.
- *
- * @param[out] w      If non-null, gets the width
- * @param[out] h      If non-null, gets the heigth
- * @param[out] flags  If non-null, gets the flags
- * @param[out] nframs If non-null, gets the nframes
- * @param[out] fps    If non-null, gets the fps
- *
- * @returns The handle on success, or
- * @returns The handle to the first frame on success, or
- * @returns -1 on failure
- */
-int bm_get_info(int handle, int *w = NULL, int * h = NULL, ubyte * flags = NULL, int *nframes = NULL, int *fps = NULL);
+//WMC - Returns 0 if invalid, nonzero if valid
+extern int bm_is_valid(int handle);

-/**
- * @brief Gets the filename of the bitmap indexed by handle
- *
- * @param[out] filename The filename of the bitmap, if successful. Is set to an empty string if unseccessful
- *
- * @todo z64 - maybe deprecate this in favor of an SCP_string version
- */
-void bm_get_filename(int bitmapnum, char *filename);
+// Gets info.   w,h,or flags,nframes or fps can be NULL if you don't care.
+//WMC - Returns -1 on failure, handle or first frame handle on success.
+int bm_get_info( int bitmapnum, int *w=NULL, int * h=NULL, ubyte * flags=NULL, int *nframes=NULL, int *fps=NULL );

-/**
- * @brief Gets the filename of the bitmap indexed by handle, which must exist.
- *
- * @details If the bitmap does not exist (i.e. the handle is invalid), then an Assertion halts program execution.
- *
- * @returns A const char* to the filename of the bitmap
- *
- * @todo z64 - maybe deprecate this in favor of an SCP_string version.
- * @todo z64 - maybe combine this with the other bm_get_filename function like so:
- *   void bm_get_filename(int handle, SCP_string *filename, bool must_exist = false);
- */
-const char *bm_get_filename(int handle);
+// get filename
+extern void bm_get_filename(int bitmapnum, char *filename);	 

-/**
- * @brief Unloads all used bitmaps, should only ever be called by game_shutdown()
- *
- * @todo Maybe move this declaration into bmpman.cpp and then extern this function within game_shutdown() to
- *  ensure it only ever gets called there.
- */
-void bm_unload_all();
+// resyncs all the bitmap palette
+extern void bm_update();

-/**
- * @brief Gets the palette for a given bitmap indexed by handle, and optionally the filename
- *
- * @param[out] pal Is set to reference the bitmap's palette
- * @param[out] name (optional) Is set to the bitmap's filename
- *
- * @todo Maybe get rid of the optional filename and have the callers call bm_get_filename. Less efficient, however.
- */
-void bm_get_palette(int handle, ubyte *pal, char *name);
+// call to load all data for all bitmaps that have been requested to be loaded
+extern void bm_gfx_load_all();
+extern void bm_unload_all();

-/**
- * @brief (DEBUG) Gets memory size, in bytes, of the locked bitmaps
- *
- * @details Both params are non-optional, and must be non-null. There's currently no safety checks on either.
- *
- * @param ntotal[out] Memory size, in bytes, of the locked bitmaps
- * @param nnew[out]   Memory size, in bytes, of the bitmaps that were locked since the last frame
- *
- * @note This is a debug function, and is undefined within release builds
- */
+// call to get the palette for a bitmap
+void bm_get_palette(int n, ubyte *pal, char *name);
+
+// Hacked function to get a pixel from a bitmap.
+// Only works good in 8bpp mode.
+void bm_gfx_get_pixel( int bitmap, float u, float v, ubyte *r, ubyte *g, ubyte *b );
+
+// Returns number of bytes of bitmaps locked this frame
+// ntotal = number of bytes of bitmaps locked this frame
+// nnew = number of bytes of bitmaps locked this frame that weren't locked last frame
 void bm_get_frame_usage(int *ntotal, int *nnew);

-/**
- * @brief Reloads an existing bmpman slot with different bitmap
- *
- * @param[in] filename The filename of the image to load
- *
- * @returns The bitmap handle on success, or
- * @returns A negative value on failure
- *
- * @note This should only be used if you are certain the new picture is the same type, has same dimensions, etc.
- */
-int bm_reload(int bitmap_handle, const char* filename);
+/* 
+ * Example on using bm_create
+ * 
+	{
+		static int test_inited = 0;
+		static int test_bmp;
+		static uint test_bmp_data[128*64];
+
+		if ( !test_inited )	{
+			test_inited = 1;
+			// Create the new bitmap and fill in its data.
+			// When you're done with it completely, call
+			// bm_release to free up the bitmap handle
+			test_bmp = bm_create( 32, 128, 64, test_bmp_data );
+			int i,j;
+			for (i=0; i<64; i++ )	{
+				for (j=0; j<64; j++ )	{
+					uint r=i*4;
+					test_bmp_data[j+i*128] = r;
+				}
+			}
+		}
+
+		bm_unload(test_bmp);	// this pages out the data, so that the
+									// next bm_lock will convert the new data to the
+									// correct bpp
+
+		// put in new data
+		int x,y;
+		gr_reset_clip();
+		for (y=0; y<64; y++)
+			for (x=0; x<128; x++ )
+				test_bmp_data[y*128+x] = 15;
+
+		// Draw the bitmap to upper left corner
+		gr_set_bitmap(test_bmp);
+		gr_bitmap( 0,0 );
+	}
+*/
+
+
+//============================================================================
+// Paging stuff
+//============================================================================

-/**
- * @brief Tells bmpman to start keeping track of what bitmaps are used where
- */
 void bm_page_in_start();
-
-/**
- * @brief Tells bmpman to stop paging (?)
- */
 void bm_page_in_stop();

 // Paging code in a library should call these functions
 // in its page in function.

-/**
- * @brief Marks a texture as being used for this level
- *
- * @param[in] num_frames If specified, assumes this is an animated texture
- */
-void bm_page_in_texture(int bitmapnum, int num_frames = 0);
+// Marks a texture as being used for this level
+// If num_frames is passed, assume this is an animation
+void bm_page_in_texture( int bitmapnum, int num_frames = 0 );

-/**
- * @brief Marks a textures as being used for level and is transparant
- *
- * @param[in] num_frames If specified, assumes this is an animated texture
- */
-void bm_page_in_xparent_texture(int bitmapnum, int num_frames = 1);
+// marks a texture as being a transparent textyre used for this level
+// Marks a texture as being used for this level
+// If num_frames is passed, assume this is an animation
+void bm_page_in_xparent_texture( int bitmapnum, int num_frames=1 );

-/**
- * @brief Marks a texture as being used for this level, and is anti-aliased
- *
- * @param[in] num_frames If specified, assumes this is an animated texture
- */
-void bm_page_in_aabitmap(int bitmapnum, int num_frames = 1);
+// Marks an aabitmap as being used for this level
+// If num_frames is passed, assume this is an animation
+void bm_page_in_aabitmap( int bitmapnum, int num_frames=1 );

-/**
- * @brief Sets BMPMAN's memory mode
- *
- * @details 0 = High memory;
- *          1 = Low memory (loads every other frame of ani's);
- *          2 = Debug low memory (only use first frame of each ani)
- *
- * @todo This should use an enum, or instead allow an arbitrary number to drop frames (like 1/2, 1/3, etc.)
- */
-void bm_set_low_mem(int mode);
+// unload a texture that was paged in
+int bm_page_out( int handle );
+
+// 
+// Mode: 0 = High memory
+//       1 = Low memory ( every other frame of ani's)
+//       2 = Debug low memory ( only use first frame of each ani )
+void bm_set_low_mem( int mode );
+
+char *bm_get_filename(int handle);

-/**
- * @brief Sets bm_set_components and bm_get_components to reference screen format functions
- */
 void BM_SELECT_SCREEN_FORMAT();
-
-/**
- * @brief Sets bm_set_components and bm_get_components to reference texture format functions
- */
 void BM_SELECT_TEX_FORMAT();
-
-/**
- * @brief Sets bm_set_components and bm_get_components to reference texture format functions (with alpha)
- */
 void BM_SELECT_ALPHA_TEX_FORMAT();

-/**
- * @brief Functional pointer that references any of the bm_set_components functions.
- *
- * @details The bm_set_components functions packs the RGBA values into the ubyte array referenced by pixel, whose
- * format differs according to its bpp value and presence of an alpha channel. The RGBA values are scaled accordingly.
- *
- * @param[out] pixel The pixel to set
- * @param[in] r Red value   (may not be NULL)
- * @param[in] g Green value (may not be NULL)
- * @param[in] b Blue value  (may not be NULL)
- * @param[in] a Alpha value (currently ignored)
- *
- * @note z64 - These functions were made predating the introduction of C++ classes, and are basically the equivalent
- * of Pixel::set(ubyte *r, ubyte *b, ubyte *g). The original comment mentions that any of the rgba params may be
- * NULL, but this is by far _NOT_ the case, as a NULL value will cause undefined behavior (really really bad chroma
- * corruption)
- *
- * @note These functions assume the incoming bitdepth will always be >= to the outgoing bitdepth of the pixel. Should
- * the incoming bitdepth be lower, the outgoing values will appear darker than they should be
- */
-extern void(*bm_set_components)(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+// set the rgba components of a pixel, any of the parameters can be NULL
+extern void (*bm_set_components)(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+extern void (*bm_set_components_32)(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+void bm_set_components_argb_d3d_16_screen(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+void bm_set_components_argb_d3d_32_screen(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+void bm_set_components_argb_d3d_16_tex(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+void bm_set_components_argb_d3d_32_tex(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);

-/**
- * @brief Sets the 16bpp screen pixel to the specified RGBA value
- *
- * @see bm_set_components
- */
-void bm_set_components_argb_16_screen(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
-
-/**
- * @brief Sets the 16bpp texture pixel to the specified RGBA value
- *
- * @see bm_set_components
- */
-void bm_set_components_argb_16_tex(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
-
-/**
- * @brief Sets the 32bpp texture pixel to the specified RGBA value
- *
- * @see bm_set_components
- */
-void bm_set_components_argb_32_tex(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
-
-/**
- * @brief Gets the RGBA components of a pixel according to the selected mode
- *
- * @see BM_SELECT_SCREEN_FORMAT() BM_SELECT_TEX_FORMAT() BM_SELECT_ALPHA_TEX_FORMAT()
- */
+// get the rgba components of a pixel, any of the parameters can be NULL
 void bm_get_components(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);

+extern int GLOWMAP;	//this holds a reference to a map that is a fully lit version of its index -Bobboau
+extern int SPECMAP;	//this holds a reference to a map that is for specular mapping -Bobboau
 extern int ENVMAP;	//this holds a reference to a map that is for environment mapping -Bobboau
+extern int NORMMAP;	// normal mapping
+extern int HEIGHTMAP;	// height map for normal mapping

-/**
- * @brief Returns the compression type of the bitmap indexed by handle
- */
-int bm_is_compressed(int handle);
+int bm_is_compressed(int num);
+int bm_get_tcache_type(int num);
+int bm_get_size(int num);
+int bm_get_num_mipmaps(int num);
+int bm_has_alpha_channel(int handle);

-/**
- * @brief Gets the correct TCACHE_TYPE for compressed graphics (uncompressed are assumed TCACHE_TYPE_NORMAL)
- */
-int bm_get_tcache_type(int handle);
-
-
-/**
- * @brief Gets the number of mipmaps of the indexed texture
- */
-int bm_get_num_mipmaps(int handle);
-
-/**
- * @brief Checks to see if the indexed bitmap has an alpha channel
- *
- * @note Currently just checks if the bitmap is 32bpp and is not a .PCX
- */
-bool bm_has_alpha_channel(int handle);
-
-/**
- * @brief (DEBUG) Prints all loaded bitmaps to an outwindow
- */
 void bm_print_bitmaps();

-/**
- * @brief Creates a render target as close to the desired resolution as possible.
- *
- * @returns the handle of an avilable render target if successful, or
- * @returns -1 if not successful
- *
- * @note BM_FLAG_RENDER_TARGET_STATIC are drawn once/infrequently, while BM_FLAG_RENDER_TARGET_DYNAMIC are drawn roughly once every frame
- */
-int bm_make_render_target(int width, int height, int flags);
-
-/**
- * @brief Checks to see if the given bitmap indexed by handle is a render target
- *
- * @returns The render type (BM_TYPE) if it is a render target, or
- * @returns 0 if it is not
- */
-int bm_is_render_target(int handle);
-
-/**
- * @brief (GR function) Calls gr_bm_set_render target for the given bitmap indexed by handle
- *
- * @returns true if successful, or
- * @returns false if unsuccessful
- */
-bool bm_set_render_target(int handle, int face = -1);
-
-/**
- * @brief Loads and parses an .EFF
- *
- * @param[in]  filename The filename of the .EFF
- * @param[in]  dir_type
- * @param[out] nframes (optional) If given, is set to the number of frames this .EFF has
- * @param[out] nfps    (optional) If given, is set to the fps of this .EFF
- * @param[out] key     (optional) If given, is set to the keyframe index of this .EFF
- * @param[out] type    (optional) If given, is set to the BM_TYPE of the .EFF
- *
- * @returns true If successful
- * @returns false If not successful
- */
-bool bm_load_and_parse_eff(const char *filename, int dir_type, int *nframes, int *nfps, int *key, BM_TYPE *type);
-
-/**
- * @brief Calculates & returns the current frame of an animation
- *
- * @param[in] frame1_handle  Handle of the animation
- * @param[in] elapsed_time   Time in seconds since the animation started playing
- * @param[in] loop           (optional) specifies if the animation should loop, default is false which causes animation to hold on the last frame
- * @param[in] divisor        (optional) if greater than zero, elapsed time will be divided by this value i.e. allows "percentage complete" to be used to determine the frame instead of the animations total time derived from fps * frames
- *
- * @returns current frame of the animation (range is zero to the number of frames minus one)
- */
-int bm_get_anim_frame(const int frame1_handle, float elapsed_time, const float divisor = 0.0f, const bool loop = false);
-
-/**
- * @brief Determines if the given handle could be used in a texture array
- *
- * @param handle The handle to query the value for
- * @return @c true if all frames have the same size, @c false otherwise. Always returns @c true for single images
- */
-bool bm_is_texture_array(const int handle);
-
-/**
- * @brief Gets the base frame of the specified animation
- *
- * @details The base frame is the frame of the animation that should be used to determine if two animation frames can be
- * used in the same draw call. Use this if you want to optimize your draw calls to make use of texture arrays.
- *
- * @param handle The handle of the animation to check. This may also be a single frame bitmap
- * @param num_frames Optionally return the number of frames in the animation
- * @return The bitmap handle of the base frame or -1 on error
- */
-int bm_get_base_frame(const int handle, int* num_frames = nullptr);
-
-/**
- * @brief Get the array index of the specified bitmap
- *
- * This should be used when passing the array index to the GPU (e.g. when building uniform structs or streaming particle
- * data)
- *
- * @param handle The handle of the bitmap
- * @return The index into the array
- */
-int bm_get_array_index(const int handle);
-
-/**
- * @brief Counts how many slots are used in bm_bitmaps
- *
- * This needs to iterate through all the slots in order to determine whether or not they're used, so shouldn't be used frivolously.
- *
- * @return The number of used slots
- */
-int bmpman_count_bitmaps();
-
-/**
- * @brief Counts how many slots are available to the bmpman system
- *
- * Since the number of slots is dynamic now, this should be used for determining the total amount of available slots at
- * the moment.
- *
- * @warning This is entirely for debugging and logging purposes. It should not be used in actual engine code.
- *
- * @return The number of available slots
- */
-int bmpman_count_available_slots();
-
-/**
- * @brief Checks if the given filename is a valid effect or texture file name
- *
- * @note At least one of @c single_frame or @c animation must be true since the result would make no sense otherwise. It
- * is also valid to set both parmeters to @c true.
- *
- * @todo This currently just tries to load the file but could be improved by not actually loading the file in the future.
- *
- * @param file The file name to check
- * @param single_frame If set to @c true then single frames are valid files
- * @param animation If set to @c true then animations are valid files
- * @return @c true if the file name is valid, @c false otherwise
- */
-bool bm_validate_filename(const SCP_string& file, bool single_frame, bool animation);
-
-SDL_Surface* bm_to_sdl_surface(int handle);
+int bm_make_render_target( int width, int height, int flags );
+int bm_is_render_target(int bitmap_id);
+int bm_set_render_target(int handle, int face = -1);

 #endif
@@ -1,16 +1,15 @@
 #include "camera/camera.h"
-#include "globalincs/alphacolors.h"
-#include "globalincs/linklist.h"
-#include "globalincs/systemvars.h" //VM_FREECAMERA etc
-#include "graphics/matrix.h"
-#include "hud/hud.h" //hud_get_draw
 #include "math/vecmat.h"
-#include "mod_table/mod_table.h"
-#include "model/model.h" //polymodel, model_get
-#include "options/Option.h"
+#include "graphics/2d.h"
+#include "globalincs/alphacolors.h"
 #include "parse/parselo.h"
+#include "physics/physics.h" //apply_physics
+#include "globalincs/systemvars.h" //VM_FREECAMERA etc
+#include "hud/hud.h" //hud_get_draw
+#include "model/model.h" //polymodel, model_get
 #include "playerman/player.h" //player_get_padlock_orient
-#include "ship/ship.h"        //compute_slew_matrix
+#include "ship/ship.h" //compute_slew_matrix
+#include "graphics/font.h"

 //*************************IMPORTANT GLOBALS*************************
 float VIEWER_ZOOM_DEFAULT = 0.75f;			//	Default viewer zoom, 0.625 as per multi-lateral agreement on 3/24/97
@@ -25,29 +24,16 @@ SCP_vector<camera*> Cameras;
 camid Current_camera;
 camid Main_camera;

-static SCP_string fov_display(float val)
-{
-	auto degrees = fl_degrees(val);
-	SCP_string out;
-	sprintf(out, u8"%.1f\u00B0", degrees);
-	return out;
-}
-auto FovOption = options::OptionBuilder<float>("Graphics.FOV", "Field Of View", "The vertical field of view.")
-                     .category("Graphics")
-                     .range(0.436332f, 1.5708f)
-                     .bind_to(&VIEWER_ZOOM_DEFAULT)
-                     .display(fov_display)
-                     .default_val(0.75f)
-                     .level(options::ExpertLevel::Advanced)
-                     .importance(60)
-                     .finish();
+//*************************INTERNAL FUNCS*************************
+//static avd_camera *cam_upgrade_to_avd(camera *cam);

 //*************************CLASS: camera*************************
 //This is where the camera class beings! :D
-camera::camera(const char *in_name, int in_signature)
+camera::camera(char *in_name, int in_signature)
 {
 	set_name(in_name);
 	sig = in_signature;
+//	flags = CAM_DEFAULT_FLAGS;

 	reset();
 }
@@ -89,16 +75,36 @@ void camera::reset()
 	pos_y.clear();
 	pos_z.clear();

+	/*
+	ori_p.clear();
+	ori_b.clear();
+	ori_h.clear();
+	*/
+	/*
+	ori_progress.clear();
+	ori_initial = ori_final = vmd_identity_matrix;
+	*/
 	for(int i = 0; i < 9; i++)
 	{
 		ori[i].clear();
 		ori[i].set(vmd_identity_matrix.a1d[i]);
 	}
+	/*
+	flags = CAM_DEFAULT_FLAGS;
+
+	desired_position = position = vmd_zero_vector;
+	
+	translation_velocity = translation_vel_limit = translation_acc_limit = vmd_zero_vector;
+
+	vm_set_identity(&orientation);
+	vm_set_identity(&desired_orientation);
+	rotation_rate = rotation_vel_limit = rotation_acc_limit = vmd_zero_vector;
+	*/
 }

-void camera::set_name(const char *in_name)
+void camera::set_name(char *in_name)
 {
-	if(in_name != NULL)
+	if(name != NULL)
 		strncpy(name, in_name, NAME_LENGTH-1);
 }

@@ -127,27 +133,6 @@ void camera::set_object_host(object *objp, int n_object_host_submodel)

 	object_host = object_h(objp);
 	object_host_submodel = n_object_host_submodel;
-	set_custom_position_function(NULL);
-	set_custom_orientation_function(NULL);
-	if(n_object_host_submodel > 0)
-	{
-		if(objp->type == OBJ_SHIP)
-		{
-			ship_subsys* ssp = GET_FIRST(&Ships[objp->instance].subsys_list);
-			while ( ssp != END_OF_LIST( &Ships[objp->instance].subsys_list ) )
-			{
-				if(ssp->system_info->subobj_num == n_object_host_submodel)
-				{
-					if(ssp->system_info->type == SUBSYSTEM_TURRET)
-					{
-						set_custom_position_function(get_turret_cam_pos);
-						set_custom_orientation_function(get_turret_cam_orient);
-					}
-				}
-				ssp = GET_NEXT( ssp );
-			}
-		}
-	}
 }

 void camera::set_object_target(object *objp, int n_object_target_submodel)
@@ -159,27 +144,23 @@ void camera::set_object_target(object *objp, int n_object_target_submodel)
 	object_target_submodel = n_object_target_submodel;
 }

-/**
- * Custom function receives the already-modified current position value.
- * It should be replaced or added to as the custom function modifier sees fit.
- */
-void camera::set_custom_position_function(void (*n_func_custom_position)(camera* /*cam*/, vec3d* /*camera_pos*/))
+//Custom function receives the already-modified current position value.
+//It should be replaced or added to as the custom function modifier sees fit.
+void camera::set_custom_position_function(void (*n_func_custom_position)(camera *cam, vec3d *camera_pos))
 {
 	func_custom_position = n_func_custom_position;
 }

-/**
- * Custom function receives the already-modified current orientation value.
- * It should be replaced or added to as the custom function modifier sees fit.
- */
-void camera::set_custom_orientation_function(void (*n_func_custom_orientation)(camera* /*cam*/, matrix* /*camera_ori*/))
+//Custom function receives the already-modified current orientation value.
+//It should be replaced or added to as the custom function modifier sees fit.
+void camera::set_custom_orientation_function(void (*n_func_custom_orientation)(camera *cam, matrix *camera_ori))
 {
 	func_custom_orientation = n_func_custom_orientation;
 }

 void camera::set_position(vec3d *in_position, float in_translation_time, float in_translation_acceleration_time, float in_translation_deceleration_time, float in_end_velocity)
 {
-	if(in_position != NULL && in_translation_time == 0.0f && in_translation_acceleration_time == 0.0f && in_translation_deceleration_time == 0.0f)
+	if(in_translation_time == 0.0f && in_translation_acceleration_time == 0.0f && in_translation_deceleration_time == 0.0f)
 	{
 		c_pos = *in_position;
 		pos_x.set(c_pos.xyz.x);
@@ -203,9 +184,16 @@ void camera::set_position(vec3d *in_position, float in_translation_time, float i
 	pos_z.setAVD(in_position->xyz.z, in_translation_time, in_translation_acceleration_time, in_translation_deceleration_time, in_end_velocity);
 }

+void camera::set_translation_velocity(vec3d *in_velocity, float in_acceleration_time)
+{
+	pos_x.setVD(in_acceleration_time, in_acceleration_time, in_velocity->xyz.x);
+	pos_y.setVD(in_acceleration_time, in_acceleration_time, in_velocity->xyz.y);
+	pos_z.setVD(in_acceleration_time, in_acceleration_time, in_velocity->xyz.z);
+}
+
 void camera::set_rotation(matrix *in_orientation, float in_rotation_time, float in_rotation_acceleration_time, float in_rotation_deceleration_time)
 {
-	if(in_orientation != NULL && in_rotation_time == 0.0f && in_rotation_acceleration_time == 0.0f && in_rotation_deceleration_time == 0.0f)
+	if(in_rotation_time == 0.0f && in_rotation_acceleration_time == 0.0f && in_rotation_deceleration_time == 0.0f)
 	{
 		c_ori = *in_orientation;
 		for(int i = 0; i < 9; i++)
@@ -224,6 +212,26 @@ void camera::set_rotation(matrix *in_orientation, float in_rotation_time, float

 	for(int i = 0; i < 9; i++)
 		ori[i].setAVD(in_orientation->a1d[i], in_rotation_time, in_rotation_acceleration_time, in_rotation_deceleration_time, 0.0f);
+	//WMC - This stationary check is here because it's a lot more
+	//accurate to directly save the matrix, if we've been provided one.
+	//IMPORTANT: Without this chunk, the HUD and view waves around with
+	//				the main camera.
+	/*
+	angles a;
+	vm_extract_angles_matrix(&a, in_orientation);
+	if(in_rotation_time == 0.0f && in_rotation_acceleration_time == 0.0f)
+	{
+		c_ori = *in_orientation;
+		ori_p.set(a.p);
+		ori_b.set(a.b);
+		ori_h.set(a.h);
+		flags |= CAM_STATIONARY_ORI;
+		return;
+	}
+
+	//Continue on
+	this->set_rotation(&a, in_rotation_time, in_rotation_acceleration_time);
+	*/
 }

 void camera::set_rotation(angles *in_angles, float in_rotation_time, float in_rotation_acceleration_time, float in_rotation_deceleration_time)
@@ -231,6 +239,33 @@ void camera::set_rotation(angles *in_angles, float in_rotation_time, float in_ro
 	matrix mtx = IDENTITY_MATRIX;
 	vm_rotate_matrix_by_angles(&mtx, in_angles);
 	this->set_rotation(&mtx, in_rotation_time, in_rotation_acceleration_time, in_rotation_deceleration_time);
+	/*
+	if(in_rotation_time == 0.0f && in_rotation_acceleration_time == 0.0f)
+	{
+		ori_p.set(in_angles->p);
+		ori_b.set(in_angles->b);
+		ori_h.set(in_angles->h);
+
+		c_ori = vmd_identity_matrix;
+		vm_rotate_matrix_by_angles(&c_ori, in_angles);
+
+		flags |= CAM_STATIONARY_ORI;
+		return;
+	}
+
+	flags &= ~CAM_STATIONARY_ORI;
+	if(in_angles == NULL)
+	{
+		ori_p.setVD(in_rotation_time, in_rotation_acceleration_time, 0.0f);
+		ori_b.setVD(in_rotation_time, in_rotation_acceleration_time, 0.0f);
+		ori_h.setVD(in_rotation_time, in_rotation_acceleration_time, 0.0f);
+		return;
+	}
+
+	ori_p.setAVD(in_angles->p, in_rotation_time, in_rotation_acceleration_time, in_rotation_acceleration_time, 0.0f);
+	ori_b.setAVD(in_angles->b, in_rotation_time, in_rotation_acceleration_time, in_rotation_acceleration_time, 0.0f);
+	ori_h.setAVD(in_angles->h, in_rotation_time, in_rotation_acceleration_time, in_rotation_acceleration_time, 0.0f);
+	*/
 }

 void camera::set_rotation_facing(vec3d *in_target, float in_rotation_time, float in_rotation_acceleration_time, float in_rotation_deceleration_time)
@@ -256,7 +291,33 @@ void camera::set_rotation_facing(vec3d *in_target, float in_rotation_time, float
 	set_rotation(&temp_matrix, in_rotation_time, in_rotation_acceleration_time, in_rotation_deceleration_time);
 }

-void camera::do_frame(float  /*in_frametime*/)
+void camera::set_rotation_velocity(angles *in_rotation_rate, float in_acceleration_time)
+{
+	Error(LOCATION, "This function is disabled until further notice.");
+	/*
+	ori_p.setVD(in_acceleration_time, in_acceleration_time, in_rotation_rate->p);
+	ori_b.setVD(in_acceleration_time, in_acceleration_time, in_rotation_rate->b);
+	ori_h.setVD(in_acceleration_time, in_acceleration_time, in_rotation_rate->h);
+	*/
+
+	/*if(in_rotation_rate == NULL)
+	{
+		rotation_rate.p = rotation_rate.b = rotation_rate.h = 0.0f;
+
+		rotation_rate_delta_time = rotation_rate_delta_time_left = in_rotation_acceleration_time = 0.0f;
+		rotation_rate_decel_time_til = -1.0f;
+		return;
+	}
+
+	rotation_rate_delta_time = rotation_rate_delta_time_left = in_rotation_acceleration_time;
+	rotation_rate_decel_time_til = -1.0f;
+
+	rotation_rate_delta.p = in_rotation_rate->p / in_rotation_acceleration_time;
+	rotation_rate_delta.b = in_rotation_rate->b / in_rotation_acceleration_time;
+	rotation_rate_delta.h = in_rotation_rate->h / in_rotation_acceleration_time;*/
+}
+
+void camera::do_frame(float in_frametime)
 {

 }
@@ -297,14 +358,12 @@ float camera::get_fov()
 	return c_fov;
 }

-eye* get_submodel_eye(polymodel *pm, int submodel_num);
 void camera::get_info(vec3d *position, matrix *orientation)
 {
+	//WTF?
 	if(position == NULL && orientation == NULL)
 		return;
-	
-	eye* eyep = NULL;
-	vec3d host_normal;
+
 	//POSITION
 	if(!(flags & CAM_STATIONARY_POS) || object_host.IsValid())
 	{
@@ -333,20 +392,7 @@ void camera::get_info(vec3d *position, matrix *orientation)
 			}
 			else
 			{
-				eyep = get_submodel_eye(pm, object_host_submodel);
-				if(eyep)
-				{
-					Assertion(objp->type == OBJ_SHIP, "This part of the code expects the object to be a ship");
-
-					vec3d c_pos_in;
-					find_submodel_instance_point_normal(&c_pos_in, &host_normal, Ships[objp->instance].model_instance_num, eyep->parent, &eyep->pnt, &eyep->norm);
-					vm_vec_unrotate(&c_pos, &c_pos_in, &objp->orient);
-					vm_vec_add2(&c_pos, &objp->pos);
-				}
-				else
-				{
-					model_find_world_point( &c_pos, &pt, pm->id, object_host_submodel, &objp->orient, &objp->pos );
-				}
+				model_find_world_point( &c_pos, &pt, pm->id, object_host_submodel, &objp->orient, &objp->pos );
 			}
 		}
 		else
@@ -355,7 +401,7 @@ void camera::get_info(vec3d *position, matrix *orientation)
 		}

 		//Do custom position stuff, if needed
-		if(func_custom_position != NULL && !eyep)
+		if(func_custom_position != NULL)
 		{
 			func_custom_position(this, &c_pos);
 		}
@@ -367,7 +413,6 @@ void camera::get_info(vec3d *position, matrix *orientation)
 	//ORIENTATION
 	if(orientation != NULL)
 	{
-		bool target_set = false;
 		if(!(flags & CAM_STATIONARY_ORI) || object_target.IsValid() || object_host.IsValid())
 		{
 			if(object_target.IsValid())
@@ -397,25 +442,27 @@ void camera::get_info(vec3d *position, matrix *orientation)
 				vec3d targetvec;
 				vm_vec_normalized_dir(&targetvec, &target_pos, &c_pos);
 				vm_vector_2_matrix(&c_ori, &targetvec, NULL, NULL);
-				target_set = true;
 			}
 			else if(object_host.IsValid())
 			{
-				if(eyep)
-				{
-					vm_vector_2_matrix(&c_ori, &host_normal, vm_vec_same(&host_normal, &object_host.objp->orient.vec.uvec)?NULL:&object_host.objp->orient.vec.uvec, NULL);
-					target_set = true;
-				}
-				else
-				{
-					c_ori = object_host.objp->orient;
-				}
+				c_ori = object_host.objp->orient;
 			}
 			else
 			{
 				c_ori = vmd_identity_matrix;
 			}

+			//Do human interaction
+			//WMC - Nevermind for now, maybe toggleable later.
+			/*
+			if ( Viewer_obj == object_host.objp || Viewer_mode & VM_CHASE ) {
+				if ( Viewer_mode & VM_PADLOCK_ANY ) {
+					player_get_padlock_orient(&c_ori);
+				} else {
+					compute_slew_matrix(&c_ori, &Viewer_slew_angles);
+				}
+			}*/
+
 			matrix mtxA = c_ori;
 			matrix mtxB = IDENTITY_MATRIX;
 			float pos = 0.0f;
@@ -427,16 +474,24 @@ void camera::get_info(vec3d *position, matrix *orientation)
 			vm_matrix_x_matrix(&c_ori, &mtxA, &mtxB);

 			vm_orthogonalize_matrix(&c_ori);
+			/*
+			angles a;
+			ori_p.get(&a.p, NULL);
+			ori_b.get(&a.b, NULL);
+			ori_h.get(&a.h, NULL);
+
+			vm_rotate_matrix_by_angles(&c_ori, &a);
+			*/
+			//vm_angles_2_matrix(&c_ori, &a);
 		}
 		//Do custom orientation stuff, if needed
-		if(func_custom_orientation != NULL && !target_set)
+		if(func_custom_orientation != NULL)
 		{
 			func_custom_orientation(this, &c_ori);
 		}
 		*orientation = c_ori;
 	}
 }
-
 //*************************warp_camera*************************
 warp_camera::warp_camera()
 {
@@ -449,7 +504,16 @@ warp_camera::warp_camera(object *objp)
 	vec3d object_pos = objp->pos;
 	matrix tmp;
 	ship_get_eye(&object_pos, &tmp, objp);
-
+	/*
+	//matrix tmp_m = vmd_identity_matrix;
+	camid cid = ship_get_eye( objp );
+	if(cid.isValid())
+	{
+		camera *cam = cid.getCamera();
+		cam->get_info(&player_pos, NULL);
+		//tmp_m = *cam->get_orientation();
+	}
+	*/
 	vm_vec_scale_add2( &object_pos, &Player_obj->orient.vec.rvec, 0.0f );
 	vm_vec_scale_add2( &object_pos, &Player_obj->orient.vec.uvec, 0.952f );
 	vm_vec_scale_add2( &object_pos, &Player_obj->orient.vec.fvec, -1.782f );
@@ -495,6 +559,7 @@ void warp_camera::set_velocity( vec3d *in_vel, bool instantaneous )

 }

+//
 void warp_camera::do_frame(float in_frametime)
 {
 	vec3d new_vel, delta_pos;
@@ -505,6 +570,8 @@ void warp_camera::do_frame(float in_frametime)

 	c_vel = new_vel;

+//	mprintf(( "Camera velocity = %.1f,%.1f, %.1f\n", Camera_velocity.xyz.x, Camera_velocity.xyz.y, Camera_velocity.xyz.z ));
+
 	vm_vec_add2( &c_pos, &delta_pos );

 	float ot = c_time+0.0f;
@@ -521,9 +588,12 @@ void warp_camera::do_frame(float in_frametime)

 		float tmp_angle = frand()*PI2;
 	
-		tmp.xyz.x = 22.0f * sinf(tmp_angle);
-		tmp.xyz.y = -22.0f * cosf(tmp_angle);
+		tmp.xyz.x = 22.0f * (float)sin(tmp_angle);
+		tmp.xyz.y = -22.0f * (float)cos(tmp_angle);

+		//mprintf(( "Angle = %.1f, vx=%.1f, vy=%.1f\n", tmp_angle, tmp.xyz.x, tmp.xyz.y ));
+
+		//mprintf(( "Changing velocity!\n" ));
 		this->set_velocity( &tmp, 0 );
 	}

@@ -546,17 +616,8 @@ void warp_camera::get_info(vec3d *position, matrix *orientation)
 //*************************subtitle*************************

 #define MAX_SUBTITLE_LINES		64
-subtitle::subtitle(int in_x_pos, int in_y_pos, const char* in_text, const char* in_imageanim, float in_display_time,
-	float in_fade_time, const color *in_text_color, int in_text_fontnum, bool center_x, bool center_y, int in_width,
-	int in_height, bool in_post_shaded)
-	:display_time(-1.0f), fade_time(-1.0f), text_fontnum(-1), time_displayed(-1.0f), time_displayed_end(-1.0f),
-	post_shaded(false)
+subtitle::subtitle(int in_x_pos, int in_y_pos, char* in_text, char* in_imageanim, float in_display_time, float in_fade_time, color *in_text_color, int in_text_fontnum, bool center_x, bool center_y, int in_width, int in_height, bool in_post_shaded)
 {
-	// Initialize color
-	gr_init_color(&text_color, 0, 0, 0);
-	
-	SCP_string text_buf;
-
 	// basic init, this always has to be done
 	memset( imageanim, 0, sizeof(imageanim) );
 	memset( &text_pos, 0, 2*sizeof(int) );
@@ -566,27 +627,29 @@ subtitle::subtitle(int in_x_pos, int in_y_pos, const char* in_text, const char*
 	if ( ((in_text != NULL) && (strlen(in_text) <= 0)) && ((in_imageanim != NULL) && (strlen(in_imageanim) <= 0)) )
 		return;

-	if (in_text != NULL && in_text[0] != '\0')
+	char text_buf[256];
+	if (in_text != NULL && strlen(in_text) > 0)
 	{
-		text_buf = in_text;
-		sexp_replace_variable_names_with_values(text_buf);
-		in_text = text_buf.c_str();
+		strcpy(text_buf, in_text);
+		sexp_replace_variable_names_with_values(text_buf, 256);
+		in_text = text_buf;
 	}


 	int num_text_lines = 0;
-	const char *text_line_ptrs[MAX_SUBTITLE_LINES];
+	char *text_line_ptrs[MAX_SUBTITLE_LINES];
 	int text_line_lens[MAX_SUBTITLE_LINES];

 	//Setup text
-	if ( (in_text != NULL) && (in_text[0] != '\0') ) {
+	if ( (in_text != NULL) && (strlen(in_text) > 0) ) {
 		int split_width = (in_width > 0) ? in_width : 200;

 		num_text_lines = split_str(in_text, split_width, text_line_lens, text_line_ptrs, MAX_SUBTITLE_LINES);
+		std::string temp_str;
 		for(int i = 0; i < num_text_lines; i++)
 		{
-			text_buf.assign(text_line_ptrs[i], text_line_lens[i]);
-			text_lines.push_back(text_buf);
+			temp_str.assign(text_line_ptrs[i], text_line_lens[i]);
+			text_lines.push_back(temp_str);
 		}
 	}

@@ -602,7 +665,7 @@ subtitle::subtitle(int in_x_pos, int in_y_pos, const char* in_text, const char*
 	fade_time = fl_abs(in_fade_time);

 	//Setup image
-	if ( (in_imageanim != NULL) && (in_imageanim[0] != '\0') )
+	if ( (in_imageanim != NULL) && (strlen(in_imageanim) > 0) )
 	{
 		image_id = bm_load(in_imageanim);

@@ -618,8 +681,8 @@ subtitle::subtitle(int in_x_pos, int in_y_pos, const char* in_text, const char*
 		int old_fontnum;
 		if (text_fontnum >= 0)
 		{
-			old_fontnum = font::get_current_fontnum();
-			font::set_font(text_fontnum);
+			old_fontnum = gr_get_current_fontnum();
+			gr_set_font(text_fontnum);
 		}
 		else
 		{
@@ -640,7 +703,7 @@ subtitle::subtitle(int in_x_pos, int in_y_pos, const char* in_text, const char*
 		// restore old font
 		if (old_fontnum >= 0)
 		{
-			font::set_font(old_fontnum);
+			gr_set_font(old_fontnum);
 		}

 		//Get image size
@@ -659,20 +722,20 @@ subtitle::subtitle(int in_x_pos, int in_y_pos, const char* in_text, const char*

 		//Center it?
 		if(center_x)
-			image_pos.x = (gr_screen.center_w - tw)/2 + gr_screen.center_offset_x;
+			image_pos.x = (gr_screen.max_w - tw)/2;
 		if(center_y)
-			image_pos.y = (gr_screen.center_h - th)/2 + gr_screen.center_offset_y;
+			image_pos.y = (gr_screen.max_h - th)/2;
 	}

 	if(in_x_pos < 0 && !center_x)
-		image_pos.x += gr_screen.center_offset_x + gr_screen.center_w + in_x_pos;
+		image_pos.x += gr_screen.max_w + in_x_pos;
 	else if(!center_x)
-		image_pos.x += gr_screen.center_offset_x + in_x_pos;
+		image_pos.x += in_x_pos;

 	if(in_y_pos < 0 && !center_y)
-		image_pos.y += gr_screen.center_offset_y + gr_screen.center_h + in_y_pos;
+		image_pos.y += gr_screen.max_h + in_y_pos;
 	else if(!center_y)
-		image_pos.y += gr_screen.center_offset_y + in_y_pos;
+		image_pos.y += in_y_pos;

 	image_pos.w = in_width;
 	image_pos.h = in_height;
@@ -716,8 +779,8 @@ void subtitle::do_frame(float frametime)
 	int old_fontnum;
 	if (text_fontnum >= 0)
 	{
-		old_fontnum = font::get_current_fontnum();
-		font::set_font(text_fontnum);
+		old_fontnum = gr_get_current_fontnum();
+		gr_set_font(text_fontnum);
 	}
 	else
 	{
@@ -728,17 +791,16 @@ void subtitle::do_frame(float frametime)
 	int x = text_pos.x;
 	int y = text_pos.y;

-
-	for(SCP_vector<SCP_string>::iterator line = text_lines.begin(); line != text_lines.end(); ++line)
+	for(unsigned int i = 0; i < text_lines.size(); i++)
 	{
-		gr_string(x, y, (char*)line->c_str(), GR_RESIZE_NONE);
+		gr_string(x, y, (char*)text_lines[i].c_str(), false);
 		y += font_height;
 	}

 	// restore old font
 	if (old_fontnum >= 0)
 	{
-		font::set_font(old_fontnum);
+		gr_set_font(old_fontnum);
 	}

 	if(image_id >= 0)
@@ -752,18 +814,18 @@ void subtitle::do_frame(float frametime)
 			vec3d scale;

 			bm_get_info(image_id, &orig_w, &orig_h);
-			scale.xyz.x = (image_pos.w > 0) ? (image_pos.w / (float) orig_w) : 1.0f;
-			scale.xyz.y = (image_pos.h > 0) ? (image_pos.h / (float) orig_h) : 1.0f;
+			scale.xyz.x = image_pos.w / (float) orig_w;
+			scale.xyz.y = image_pos.h / (float) orig_h;
 			scale.xyz.z = 1.0f;

 			gr_push_scale_matrix(&scale);
-			gr_bitmap(fl2i(image_pos.x / scale.xyz.x), fl2i(image_pos.y / scale.xyz.y), GR_RESIZE_NONE);
+			gr_bitmap(image_pos.x, image_pos.y, false);
 			gr_pop_scale_matrix();
 		}
 		// no scaling
 		else
 		{
-			gr_bitmap(image_pos.x, image_pos.y, GR_RESIZE_NONE);
+			gr_bitmap(image_pos.x, image_pos.y, false);
 		}
 	}

@@ -781,8 +843,11 @@ subtitle::~subtitle()

 void subtitle::clone(const subtitle &sub)
 {
+	uint i = 0;

-	text_lines = sub.text_lines;
+	for (i = 0; i < sub.text_lines.size(); i++) {
+		text_lines.push_back(sub.text_lines[i]);
+	}
 	text_fontnum = sub.text_fontnum;

 	// copy the structs
@@ -808,7 +873,7 @@ void subtitle::clone(const subtitle &sub)
 	post_shaded = sub.post_shaded;
 }

-subtitle& subtitle::operator=(const subtitle &sub)
+const subtitle &subtitle::operator=(const subtitle &sub)
 {
 	if (this != &sub) {
 		if (image_id != -1) {
@@ -830,7 +895,7 @@ camid::camid()
 	sig = -1;
 }

-camid::camid(size_t n_idx, int n_sig)
+camid::camid(int n_idx, int n_sig)
 {
 	idx = n_idx;
 	sig = n_sig;
@@ -844,7 +909,7 @@ camera* camid::getCamera()
 	return Cameras[idx];
 }

-size_t camid::getIndex()
+uint camid::getIndex()
 {
 	return idx;
 }
@@ -856,7 +921,7 @@ int camid::getSignature()

 bool camid::isValid()
 {
-	if(idx >= Cameras.size())
+	if(idx < 0 || idx >= Cameras.size())
 		return false;

 	if(Cameras[idx] == NULL)
@@ -879,8 +944,13 @@ void cam_close()
 {
 	//Set Current_camera to nothing
 	Current_camera = camid();
-	for (auto ii = Cameras.begin(); ii != Cameras.end(); ++ii) {
-		delete * ii;
+	for(unsigned int i = 0; i < Cameras.size(); i++)
+	{
+		if(Cameras[i] != NULL)
+		{
+			delete Cameras[i];
+			Cameras[i] = NULL;
+		}
 	}
 	Cameras.clear();
 }
@@ -891,14 +961,14 @@ int cam_get_next_sig()
 	return next_sig++;
 }

-camid cam_create(const char *n_name, vec3d *n_pos, vec3d *n_norm, object *n_object, int n_object_host_submodel)
+camid cam_create(char *n_name, vec3d *n_pos, vec3d *n_norm, object *n_object, int n_object_host_submodel)
 {
 	matrix ori;
 	vm_vector_2_matrix_norm(&ori, n_norm);
 	return cam_create(n_name, n_pos, &ori, n_object, n_object_host_submodel);
 }

-camid cam_create(const char *n_name, vec3d *n_pos, matrix *n_ori, object *n_object, int n_object_host_submodel)
+camid cam_create(char *n_name, vec3d *n_pos, matrix *n_ori, object *n_object, int n_object_host_submodel)
 {
 	camera *cam = NULL;
 	camid cid;
@@ -914,9 +984,29 @@ camid cam_create(const char *n_name, vec3d *n_pos, matrix *n_ori, object *n_obje
 		strncpy(buf, n_name, NAME_LENGTH-1);

 	//Find a free slot
-	cam = new camera(buf, sig);
-	cid = camid(Cameras.size(), sig);
-	Cameras.push_back(cam);
+	for(uint i = 0; i < Cameras.size(); i++)
+	{
+		if(Cameras[i] == NULL)
+		{
+			cam = new camera(buf, sig);
+			cid = camid(i, sig);
+			Cameras[i] = cam;
+			break;
+		}
+		else if(Cameras[i]->is_empty())
+		{
+			delete Cameras[i];
+			cam = new camera(buf, sig);
+			cid = camid(i, sig);
+			Cameras[i] = cam;
+		}
+	}
+	if(cam == NULL)
+	{
+		cam = new camera(buf, sig);
+		cid = camid(Cameras.size(), sig);
+		Cameras.push_back(cam);
+	}

 	//Set attributes
 	if(n_pos != NULL)
@@ -939,7 +1029,7 @@ void cam_delete(camid cid)

 void cam_do_frame(float frametime)
 {
-	size_t i,size=Cameras.size();
+	unsigned int i,size=Cameras.size();
 	for(i = 0; i < size; i++)
 	{
 		if(Cameras[i] != NULL)
@@ -949,7 +1039,7 @@ void cam_do_frame(float frametime)

 camid cam_get_camera(uint idx)
 {
-	if(idx >= Cameras.size())
+	if(idx < 0 || idx >= Cameras.size())
 		return camid();

 	return camid(idx, Cameras[idx]->get_signature());
@@ -960,17 +1050,15 @@ camid cam_get_current()
 	return Current_camera;
 }

-size_t cam_get_num()
+uint cam_get_num()
 {
 	return Cameras.size();
 }

-/**
- * Looks up camera by name, returns -1 on failure
- */
-camid cam_lookup(const char* name)
+//Looks up camera by name, returns -1 on failure
+camid cam_lookup(char *name)
 {
-	size_t i, size=Cameras.size();
+	unsigned int i,size=Cameras.size();
 	for(i = 0; i < size; i++)
 	{
 		if(Cameras[i] != NULL && !stricmp(Cameras[i]->get_name(), name))
@@ -993,15 +1081,12 @@ bool cam_set_camera(camid cid)
 	Viewer_mode |= VM_FREECAMERA;
 	Current_camera = cid;

-	if (!Cutscene_camera_displays_hud) 
+	if(!Camera_hud_draw_saved)
 	{
-		if(!Camera_hud_draw_saved)
-		{
-			Camera_hud_draw_value = hud_get_draw();
-			Camera_hud_draw_saved = true;
-		}
-		hud_set_draw(0);
+		Camera_hud_draw_value = hud_get_draw();
+		Camera_hud_draw_saved = true;
 	}
+	hud_set_draw(0);
 	return true;
 }

@@ -1009,11 +1094,37 @@ void cam_reset_camera()
 {
 	Viewer_mode &= ~VM_FREECAMERA;

-	if (!Cutscene_camera_displays_hud) 
+	hud_set_draw(Camera_hud_draw_value);
+	Camera_hud_draw_saved = false;
+}
+
+//Functions must delete the original camera after calling this function.
+//Note that due to the esoteric nature of this function, it should not
+//be used outside camera.cpp
+/*
+static avd_camera *cam_upgrade_to_avd(camera *cam)
+{
+	for(uint i = 0; i < Cameras.size(); i++)
 	{
-		hud_set_draw(Camera_hud_draw_value);
-		Camera_hud_draw_saved = false;
+		if(Cameras[i] == cam)
+			break;
 	}
+
+	if(i == Cameras.size())
+		return NULL;
+
+	avd_camera *avdcam = new avd_camera(cam);
+
+	//Make the switch
+	Cameras[i] = avdcam;
+
+	return avdcam;
+}
+*/
+
+void subtitles_init()
+{
+	//Do nothing!!
 }

 void subtitles_close()
@@ -1023,75 +1134,20 @@ void subtitles_close()

 void subtitles_do_frame(float frametime)
 {
-	SCP_vector<subtitle>::iterator sub;
-	for(sub = Subtitles.begin(); sub != Subtitles.end(); ++sub)
+	unsigned int i,size=Subtitles.size();
+	for(i = 0; i < size; i++)
 	{
-		if ( !sub->is_post_shaded( ) )
-			sub->do_frame(frametime);
+		if ( !Subtitles[i].is_post_shaded( ) )
+			Subtitles[i].do_frame(frametime);
 	}
 }

 void subtitles_do_frame_post_shaded(float frametime)
 {
-	SCP_vector<subtitle>::iterator sub;
-	for(sub = Subtitles.begin(); sub != Subtitles.end(); ++sub)
+	unsigned int i,size=Subtitles.size();
+	for(i = 0; i < size; i++)
 	{
-		if ( sub->is_post_shaded( ) )
-			sub->do_frame(frametime);
+		if ( Subtitles[i].is_post_shaded( ) )
+			Subtitles[i].do_frame(frametime);
 	}
-}
-
-vec3d normal_cache;
-
-void get_turret_cam_pos(camera *cam, vec3d *pos)
-{
-	object_h obj(cam->get_object_host());
-	if(!obj.IsValid())
-		return;
-	ship* shipp = &Ships[cam->get_object_host()->instance];
-	ship_subsys* ssp = GET_FIRST(&shipp->subsys_list);
-	while ( ssp != END_OF_LIST( &shipp->subsys_list ) )
-	{
-		if(ssp->system_info->subobj_num == cam->get_object_host_submodel())
-		{
-			ship_get_global_turret_gun_info(cam->get_object_host(), ssp, pos, &normal_cache, 1, NULL);
-			vec3d offset = vmd_zero_vector;
-			offset.xyz.x = 0.0001f;
-			vm_vec_add2(pos, &offset); // prevent beam turrets from crashing with a nullvec
-			break;
-		}
-		ssp = GET_NEXT( ssp );
-	}
-}
-
-void get_turret_cam_orient(camera *cam, matrix *ori)
-{
-	object_h obj(cam->get_object_host());
-	if(!obj.IsValid())
-		return;
-	vm_vector_2_matrix(ori, &normal_cache, vm_vec_same(&normal_cache, &cam->get_object_host()->orient.vec.uvec)?NULL:&cam->get_object_host()->orient.vec.uvec, NULL);
-}
-
-eye* get_submodel_eye(polymodel *pm, int submodel_num)
-{
-	if(pm->n_view_positions > 0)
-	{
-		for(int i = 0; i < pm->n_view_positions; ++i)
-		{
-			if(pm->view_positions[i].parent == submodel_num)
-			{
-				return &pm->view_positions[i];
-			}
-			int sm = pm->submodel[submodel_num].first_child;
-			while(sm > 0) //look for eyepoints attached to children, important for turret arms
-			{
-				if(pm->view_positions[i].parent == sm)
-				{
-					return &pm->view_positions[i];
-				}
-				sm = pm->submodel[sm].next_sibling;
-			}
-		}
-	}
-	return NULL;
-}
+}
@@ -2,11 +2,11 @@
 #ifndef _CAMERA_H
 #define _CAMERA_H

-#include "globalincs/globals.h"
-#include "globalincs/pstypes.h"
 #include "graphics/2d.h"
-#include "object/object.h"
+#include "globalincs/pstypes.h"
+#include "globalincs/globals.h"
 #include "physics/physics.h"	//for avd
+#include "object/object.h"

 #include <string>

@@ -17,6 +17,7 @@

 class camera
 {
+	friend class avd_camera;
 protected:
 	char name[NAME_LENGTH];
 	int sig;
@@ -32,9 +33,17 @@ protected:
 	void (*func_custom_orientation)(camera *cam, matrix *ori);

 	avd_movement fov;
+
 	avd_movement pos_x;
 	avd_movement pos_y;
 	avd_movement pos_z;
+
+	//avd_movement ori_p;
+	//avd_movement ori_b;
+	//avd_movement ori_h;
+	//avd_movement ori_progress;
+	//matrix ori_initial;
+	//matrix ori_final;
 	avd_movement ori[9];

 	//Cache stuff
@@ -42,13 +51,13 @@ protected:
 	vec3d c_pos;
 	matrix c_ori;
 public:
-	camera(const char *in_name=NULL, int in_signature=-1);
+	camera(char *in_name=NULL, int in_signature=-1);
 	~camera();
 	void clear();
 	void reset();

 	//Set
-	void set_name(const char *in_name);
+	void set_name(char *in_name);

 	void set_object_host(object *objp, int n_object_host_submodel = -1);
 	void set_object_target(object *objp, int n_object_target_submodel = -1);
@@ -59,13 +68,15 @@ public:
 	void set_fov(float in_fov, float in_fov_time = 0.0f, float in_fov_acceleration_time = 0.0f, float in_deceleration_time = 0.0f);

 	void set_position(vec3d *in_position = NULL, float in_translation_time = 0.0f, float in_translation_acceleration_time = 0.0f, float in_translation_deceleration_time = 0.0f, float in_end_velocity = 0.0f);
+	void set_translation_velocity(vec3d *in_velocity, float in_acceleration_time = 0.0f);

 	void set_rotation(matrix *in_orientation = NULL, float in_rotation_time = 0.0f, float in_rotation_acceleration_time = 0.0f, float in_rotation_deceleration_time = 0.0f);
 	void set_rotation(angles *in_angles, float in_rotation_time = 0.0f, float in_rotation_acceleration_time = 0.0f, float in_rotation_deceleration_time = 0.0f);
 	void set_rotation_facing(vec3d *in_target, float in_rotation_time = 0.0f, float in_rotation_acceleration_time = 0.0f, float in_rotation_deceleration_time = 0.0f);
+	void set_rotation_velocity(angles *in_rotation_rate, float in_acceleration_time = 0.0f);

 	//Get
-	const char* get_name() { return name; }
+	char *get_name() {return name;}
 	int get_signature() {return sig;}
 	object *get_object_host();
 	int get_object_host_submodel();
@@ -113,7 +124,7 @@ class subtitle
 private:
 	void clone(const subtitle &sub);

-	SCP_vector<SCP_string> text_lines;
+	SCP_vector<std::string> text_lines;
 	struct { int x; int y; } text_pos;

 	float display_time;
@@ -134,13 +145,13 @@ private:

 	bool post_shaded;
 public:
-	subtitle(int in_x_pos, int in_y_pos, const char* in_text = NULL, const char* in_imageanim = NULL,
-			 float in_display_time = 0, float in_fade_time = 0.0f, const color *in_text_color = NULL, int in_text_fontnum = -1,
+	subtitle(int in_x_pos, int in_y_pos, char* in_text = NULL, char* in_imageanim = NULL,
+			 float in_display_time = 0, float in_fade_time = 0.0f, color *in_text_color = NULL, int in_text_fontnum = -1,
 			 bool center_x = false, bool center_y = false, int in_width = 0, int in_height = 0, bool post_shaded=false);
 	~subtitle();

    subtitle(const subtitle &sub) { clone(sub); }
-    subtitle& operator=(const subtitle &sub);
+    const subtitle &operator=(const subtitle &sub);

 	void do_frame(float frametime);
 	bool is_post_shaded( ) { return post_shaded; }
@@ -155,19 +166,17 @@ extern float Sexp_fov;
 void cam_init();
 void cam_close();
 void cam_do_frame(float frametime);
-camid cam_create(const char *n_name=NULL, vec3d *n_pos=NULL, matrix *n_ori=NULL, object *n_object=NULL, int n_submodel_parent=-1);
-camid cam_create(const char *n_name, vec3d *n_pos, vec3d *n_norm, object *n_object=NULL, int n_submodel_parent=-1);
+camid cam_create(char *n_name=NULL, vec3d *n_pos=NULL, matrix *n_ori=NULL, object *n_object=NULL, int n_submodel_parent=-1);
+camid cam_create(char *n_name, vec3d *n_pos, vec3d *n_norm, object *n_object=NULL, int n_submodel_parent=-1);
 void cam_delete(camid cid);
 bool cam_set_camera(camid cid);
 void cam_reset_camera();
-camid cam_lookup(const char* name);
+camid cam_lookup(char *name);
 camid cam_get_camera(uint index);
 camid cam_get_current();
-size_t cam_get_num();
-
-void get_turret_cam_pos(camera *cam, vec3d *pos);
-void get_turret_cam_orient(camera *cam, matrix *ori);
+uint cam_get_num();

+void subtitles_init();
 void subtitles_close();
 void subtitles_do_frame(float frametime);
 void subtitles_do_frame_post_shaded(float frametime);
@@ -13,21 +13,19 @@
 #define __CFILE_H__


+#include <time.h>
 #include "globalincs/pstypes.h"

-#include <ctime>
-#include <stdexcept>
-#include <memory>
-
-
 #define CF_EOF (-1)

 #define CF_SEEK_SET (0)
 #define CF_SEEK_CUR (1)
 #define CF_SEEK_END (2)

-// Opaque file handle
-struct CFILE;
+typedef struct CFILE {
+	int		id;			// Index into cfile.cpp specific structure
+	int		version;		// version of this file
+} CFILE;

 // extra info that can be returned when getting a file listing
 typedef struct {
@@ -77,12 +75,9 @@ typedef struct {
 #define CF_TYPE_INTEL_ANIMS			34
 #define CF_TYPE_SCRIPTS				35
 #define CF_TYPE_FICTION				36
-#define CF_TYPE_FREDDOCS			37
-#define CF_TYPE_INTERFACE_MARKUP 38
-#define CF_TYPE_INTERFACE_CSS 39

-#define CF_MAX_PATH_TYPES                                                                                              \
-	40 // Can be as high as you'd like //DTP; yeah but beware alot of things uses CF_MAX_PATH_TYPES
+#define CF_MAX_PATH_TYPES			37			// Can be as high as you'd like //DTP; yeah but beware alot of things uses CF_MAX_PATH_TYPES
+

 // TRUE if type is specified and valid
 #define CF_TYPE_SPECIFIED(path_type) (((path_type)>CF_TYPE_INVALID) && ((path_type)<CF_MAX_PATH_TYPES))
@@ -96,135 +91,66 @@ typedef struct {
 #define CF_SORT_TIME 2
 #define CF_SORT_REVERSE 3

-/**
- * @brief Contains a collection of flags for specifying from where a CFILE should be opened
- *
- * There are two types of flags. CF_LOCATION_GAME_ROOT and CF_LOCATION_USER_ROOT specify in which basic root directory
- * CFile should search for files.
- *
- * The remaining flags control what type of location may be used for the operation. It's possible to restrict the
- * location to the primary mod, the remaining mods or the top-level root directory.
- */
-enum CFileLocationFlags {
-	CF_LOCATION_ROOT_GAME = 1 << 0, //!< The game root location. This is the location of the game data (e.g. FS2 retail)
-	/**
-	 * @brief The user directories.
-	 *
-	 * If the engine is in portable mode then using this flag exclusively will result in a failure to open files!
-	 */
-	CF_LOCATION_ROOT_USER = 1 << 1,
-
-	/**
-	 * @brief The memory root
-	 *
-	 * This contains all the built-in files available to the engine.
-	 */
-	CF_LOCATION_ROOT_MEMORY = 1 << 2,
-
-	/**
-	 * @brief Mask for extracting root type from a location bit field
-	 */
-	CF_LOCATION_ROOT_MASK = 0xFFFF,
-
-	CF_LOCATION_TYPE_ROOT = 1 << 16, //!< The basic, top-level root location
-	/**
-	 * @brief The primary mod location.
-	 *
-	 * This is the mod that appears first on the command line. If there are no mods then the root location is considered
-	 * to be the primary mod
-	 */
-	CF_LOCATION_TYPE_PRIMARY_MOD = 1 << 17,
-	/**
-	 * @brief The remaining mods.
-	 *
-	 * If there are no mods on the command line then this might not include any valid location.
-	 */
-	CF_LOCATION_TYPE_SECONDARY_MODS = 1 << 18,
-
-	/**
-	 * @brief Bitmask for extracting the type from a location bit field
-	 */
-	CF_LOCATION_TYPE_MASK = 0xFFFF0000,
-
-	/**
-	 * @brief A combination of all flags
-	 *
-	 * This should be used when the default behavior without any location filtering is desired.
-	 */
-	CF_LOCATION_ALL = CF_LOCATION_ROOT_MASK | CF_LOCATION_TYPE_MASK
-};
+#define cfread_fix(file) (fix)cfread_int(file)
+#define cfwrite_fix(i,file) cfwrite_int(i,file)

 // callback function used for get_file_list() to filter files to be added to list.  Return 1
 // to add file to list, or 0 to not add it.
-extern int (*Get_file_list_filter)(const char *filename);
-
-// extra check for child directory under CF_TYPE_*
-// NOTE: if specified cf_get_file_list() will not search pack files!
-// NOTE: specified string must not contain ':' or spaces or begin with DIR_SEPARATOR!
-extern const char *Get_file_list_child;
+extern int (*Get_file_list_filter)(char *filename);

 // cfile directory. valid after cfile_init() returns successfully
 #define CFILE_ROOT_DIRECTORY_LEN			256
-
-namespace cfile {
-enum class ModRootType { Unknown, Folder, Package };
-
-enum class LocationType { Unknown, SecondaryMod, PrimaryMod, GameRoot };
-
-struct ModRoot {
-	ModRootType type = ModRootType::Unknown;
-	SCP_string path;
-	LocationType location_type = LocationType::Unknown;
-	bool user_location         = false;
-};
-} // namespace cfile
+extern char Cfile_root_dir[CFILE_ROOT_DIRECTORY_LEN];
+#ifdef SCP_UNIX
+extern char Cfile_user_dir[CFILE_ROOT_DIRECTORY_LEN];
+#endif

 //================= LOW-LEVEL FUNCTIONS ==================
-int cfile_init(const SCP_vector<cfile::ModRoot>& modRoots);
-void cfile_close();
+// Call this once at the beginning of the program
+int cfile_init(char *exe_dir,char *cdrom_dir=NULL);
+
+// Call this if pack files got added or removed or the
+// cdrom changed.  This will refresh the list of filenames 
+// stored in packfiles and on the cdrom.
+void cfile_refresh();

 // add an extension to a filename if it doesn't already have it
-char *cf_add_ext(const char *filename, const char *ext);
+char *cf_add_ext(char *filename, char *ext);

 // return CF_TYPE (directory location type) of a CFILE you called cfopen() successfully on.
 int cf_get_dir_type(CFILE *cfile);

 // Opens the file.  If no path is given, use the extension to look into the
-// default path.  If mode is NULL, delete the file.
-CFILE* _cfopen(const char* source_file, int line, const char* filename, const char* mode, int type = CFILE_NORMAL,
-               int dir_type = CF_TYPE_ANY, bool localize = false, uint32_t location_flags = CF_LOCATION_ALL);
-#define cfopen(...) _cfopen(LOCATION, __VA_ARGS__) // Pass source location to the function
+// default path.  If mode is NULL, delete the file.  
+CFILE *cfopen(char *filename, char *mode, int type = CFILE_NORMAL, int dir_type = CF_TYPE_ANY, bool localize = false);

 // like cfopen(), but it accepts a fully qualified path only (ie, the result of a cf_find_file_location() call)
 // NOTE: only supports reading files!!
-CFILE *_cfopen_special(const char* source_file, int line, const char *file_path, const char *mode,
-	const size_t size, const size_t offset, const void* data, int dir_type = CF_TYPE_ANY);
-#define cfopen_special(...) _cfopen_special(LOCATION, __VA_ARGS__) // Pass source location to the function
+CFILE *cfopen_special(char *file_path, char *mode, const int size, const int offset, int dir_type = CF_TYPE_ANY);

 // Flush the open file buffer
 int cflush(CFILE *cfile);

-// will throw an error if cfread*() functions read past this mark
-// converted to raw offsets when used, but gets passed actual length from current position
-// setting 'len' to zero will disable the check
-void cf_set_max_read_len(CFILE *cfile, size_t len);
+// version number of opened file.  Will be 0 unless you put something else here after you
+// open a file.  Once set, you can use minimum version numbers with the read functions.
+void cf_set_version( CFILE * cfile, int version );

 // Deletes a file. Returns 0 on error, 1 if successful
-int cf_delete(const char *filename, int dir_type, uint32_t location_flags = CF_LOCATION_ALL);
+int cf_delete(char *filename, int dir_type);

 // Same as _access function to read a file's access bits
-int cf_access(const char *filename, int dir_type, int mode);
+int cf_access(char *filename, int dir_type, int mode);

 // Returns 1 if the file exists, 0 if not.
 // Checks only the file system.
-int cf_exists(const char *filename, int dir_type);
+int cf_exists(char *filename, int dir_type);

 // Goober5000
 // Returns 1 if the file exists, 0 if not.
 // Checks both the file system and the VPs.
-int cf_exists_full(const char *filename, int dir_type);
+int cf_exists_full(char *filename, int dir_type);
 // check num_ext worth of ext_list extensions
-int cf_exists_full_ext(const char *filename, int dir_type, const int num_ext, const char **ext_list);
+int cf_exists_full_ext(char *filename, int dir_type, const int num_ext, const char **ext_list);

 // ctmpfile() opens a temporary file stream.  File is deleted automatically when closed
 CFILE *ctmpfile();
@@ -242,7 +168,11 @@ int cfilelength(CFILE *fp);
 int cfread(void *buf, int elsize, int nelem, CFILE *fp);

 // cfwrite() writes to the file
-int cfwrite(const void *buf, int elsize, int nelem, CFILE *cfile);
+int cfwrite(void *buf, int elsize, int nelem, CFILE *cfile);
+
+// Reads/writes RLE compressed data.
+int cfread_compressed(void *buf, int elsize, int nelem, CFILE *cfile);
+int cfwrite_compressed(void *param_buf, int param_elsize, int param_nelem, CFILE *cfile);

 // Moves the file pointer
 int cfseek(CFILE *fp, int offset, int where);
@@ -254,7 +184,7 @@ int cftell(CFILE *fp);
 int cfputc(int c, CFILE *cfile);

 // cfputs() writes a string to a file
-int cfputs(const char *str, CFILE *cfile);
+int cfputs(char *str, CFILE *cfile);

 // cfgetc() reads a character to a file
 int cfgetc(CFILE *cfile);
@@ -266,23 +196,23 @@ char *cfgets(char *buf, int n, CFILE *cfile);
 int cfeof(CFILE *cfile);

 // Return the data pointer associated with the CFILE structure (for memory mapped files)
-const void *cf_returndata(CFILE *cfile);
+void *cf_returndata(CFILE *cfile);

 // get the 2 byte checksum of the passed filename - return 0 if operation failed, 1 if succeeded
-int cf_chksum_short(const char *filename, ushort *chksum, int max_size = -1, int cf_type = CF_TYPE_ANY );
+int cf_chksum_short(char *filename, ushort *chksum, int max_size = -1, int cf_type = CF_TYPE_ANY );

 // get the 2 byte checksum of the passed file - return 0 if operation failed, 1 if succeeded
 // NOTE : preserves current file position
 int cf_chksum_short(CFILE *file, ushort *chksum, int max_size = -1);

 // get the 32 bit CRC checksum of the passed filename - return 0 if operation failed, 1 if succeeded
-int cf_chksum_long(const char *filename, uint *chksum, int max_size = -1, int cf_type = CF_TYPE_ANY );
+int cf_chksum_long(char *filename, uint *chksum, int max_size = -1, int cf_type = CF_TYPE_ANY );

 // get the 32 bit CRC checksum of the passed file - return 0 if operation failed, 1 if succeeded
 // NOTE : preserves current file position
 int cf_chksum_long(CFILE *file, uint *chksum, int max_size = -1);

-int cf_chksum_pack(const char *filename, uint *chk_long, bool full = false);
+int cf_chksum_pack(char *filename, uint *chk_long, bool full = false);

 // convenient for misc checksumming purposes ------------------------------------------

@@ -290,20 +220,21 @@ int cf_chksum_pack(const char *filename, uint *chk_long, bool full = false);
 ushort cf_add_chksum_short(ushort seed, ubyte *buffer, int size);

 // update cur_chksum with the chksum of the new_data of size new_data_size
-uint cf_add_chksum_long(uint seed, ubyte *buffer, size_t size);
+uint cf_add_chksum_long(uint seed, ubyte *buffer, int size);

 // convenient for misc checksumming purposes ------------------------------------------

 //================= HIGH LEVEL FUNCTIONS ==================
+int cfexist(char *filename);	// Returns true if file exists on disk (1) or in hog (2).

 // rename a file, utilizing the extension to determine where file is.
 #define CF_RENAME_SUCCESS				0					// successfully renamed the file
 #define CF_RENAME_FAIL_ACCESS			1					// new name could not be created
 #define CF_RENAME_FAIL_EXIST			2					// old name does not exist
-int cf_rename(const char *old_name, const char *name, int type = CF_TYPE_ANY );
+int cf_rename(char *old_name, char *name, int type = CF_TYPE_ANY );

 // changes the attributes of a file
-void cf_attrib(const char *name, int set, int clear, int type);
+void cf_attrib(char *name, int set, int clear, int type);

 // flush (delete all files in) the passed directory (by type), return the # of files deleted
 // NOTE : WILL NOT DELETE READ-ONLY FILES
@@ -312,37 +243,25 @@ int cfile_flush_dir(int type);
 // functions for reading from cfile
 // These are all high level, built up from
 // cfread.
+int cfgetc(CFILE *fp);
 char *cfgets(char *buf, size_t n, CFILE *fp);
-char cfread_char(CFILE* file, char deflt = 0);
-ubyte cfread_ubyte(CFILE* file, ubyte deflt = 0);
-short cfread_short(CFILE* file, short deflt = 0);
-ushort cfread_ushort(CFILE* file, ushort deflt = 0);
-int cfread_int(CFILE* file, int deflt = 0);
-uint cfread_uint(CFILE* file, uint deflt = 0);
-float cfread_float(CFILE* file, float deflt = 0.0f);
-void cfread_vector(vec3d* vec, CFILE* file, vec3d* deflt = nullptr);
+char cfread_char(CFILE *file, int ver = 0, char deflt = 0);
+ubyte cfread_ubyte(CFILE *file, int ver = 0, ubyte deflt = 0);
+short cfread_short(CFILE *file, int ver = 0, short deflt = 0);
+ushort cfread_ushort(CFILE *file, int ver = 0, ushort deflt = 0);
+int cfread_int(CFILE *file, int ver = 0, int deflt = 0);
+uint cfread_uint(CFILE *file, int ver = 0, uint deflt = 0);
+float cfread_float(CFILE *file, int ver = 0, float deflt = 0.0f);
+void cfread_vector(vec3d *vec, CFILE *file, int ver = 0, vec3d *deflt = NULL);
+void cfread_angles(angles *ang, CFILE *file, int ver = 0, angles *deflt = NULL);

 // Reads variable length, null-termined string.   Will only read up
 // to n characters.
 void cfread_string(char *buf,int n, CFILE *file);
-/**
- * @brief Read a fixed length string that is not null-terminated, with the length stored in file
- *
- * @param buf Pre-allocated array to store string
- * @param n Size of pre-allocated array
- * @param file File to read from
- *
- * @note Appends NULL character to string (buf)
- */
+// Read a fixed length that is null-terminatedm, and has the length
+// stored in file
 void cfread_string_len(char *buf,int n, CFILE *file);

-/**
- * @brief Read a string from the file where the length is stored in the file
- * @param file The file to read the string from
- * @return The string that was read
- */
-SCP_string cfread_string_len(CFILE *file);
-
 // functions for writing cfiles
 int cfwrite_char(char c, CFILE *file);
 int cfwrite_float(float f, CFILE *file);
@@ -351,37 +270,19 @@ int cfwrite_uint(uint i, CFILE *file);
 int cfwrite_short(short s, CFILE *file);
 int cfwrite_ushort(ushort s, CFILE *file);
 int cfwrite_ubyte(ubyte u, CFILE *file);
+int cfwrite_vector(vec3d *vec, CFILE *file);
+int cfwrite_angles(angles *ang, CFILE *file);

 // writes variable length, null-termined string.
-int cfwrite_string(const char *buf, CFILE *file);
+int cfwrite_string(char *buf, CFILE *file);

-/**
- * @brief Write a fixed length string (not including its null terminator), with the length stored in file
- *
- * @param buf String to write to file
- * @param file File to write to
- */
-int cfwrite_string_len(const char *buf, CFILE *file);
+// write a fixed length that is null-terminatedm, and has the length
+// stored in file
+int cfwrite_string_len(char *buf, CFILE *file);

-int cf_get_file_list(SCP_vector<SCP_string>& list, int pathtype, const char* filter, int sort = CF_SORT_NONE,
-                     SCP_vector<file_list_info>* info = nullptr, uint32_t location_flags = CF_LOCATION_ALL);
-int cf_get_file_list(int max, char** list, int type, const char* filter, int sort = CF_SORT_NONE,
-                     file_list_info* info = nullptr, uint32_t location_flags = CF_LOCATION_ALL);
-int cf_get_file_list_preallocated(int max, char arr[][MAX_FILENAME_LEN], char** list, int type, const char* filter,
-                                  int sort = CF_SORT_NONE, file_list_info* info = nullptr,
-                                  uint32_t location_flags = CF_LOCATION_ALL);
+int cf_get_file_list( int max, char **list, int type, char *filter, int sort = CF_SORT_NONE, file_list_info *info = NULL );
+int cf_get_file_list_preallocated( int max, char arr[][MAX_FILENAME_LEN], char **list, int type, char *filter, int sort = CF_SORT_NONE, file_list_info *info = NULL );
 void cf_sort_filenames( int n, char **list, int sort, file_list_info *info = NULL );
-void cf_sort_filenames( SCP_vector<SCP_string> &list, int sort, SCP_vector<file_list_info> *info = NULL );
-
-struct CFileLocation {
-	bool found = false;
-	SCP_string full_name;
-	size_t size          = 0;
-	size_t offset        = 0;
-	const void* data_ptr = nullptr;
-
-	explicit CFileLocation(bool found_in = false) : found(found_in) {}
-};

 // Searches for a file.   Follows all rules and precedence and searches
 // CD's and pack files.
@@ -392,17 +293,7 @@ struct CFileLocation {
 //         size        - File size
 //         offset      - Offset into pack file.  0 if not a packfile.
 // Returns: If not found returns 0.
-CFileLocation cf_find_file_location(const char* filespec, int pathtype, bool localize = false,
-                                    uint32_t location_flags = CF_LOCATION_ALL);
-
-struct CFileLocationExt : public CFileLocation {
-	int extension_index = -1;
-
-	explicit CFileLocationExt(int extension_index_in = -1)
-	    : CFileLocation(extension_index_in >= 0), extension_index(extension_index_in)
-	{
-	}
-};
+int cf_find_file_location( char *filespec, int pathtype, int max_out, char *pack_filename, int *size, int *offset, bool localize = false);

 // Searches for a file.   Follows all rules and precedence and searches
 // CD's and pack files.  Searches all locations in order for first filename using ext filter list.
@@ -416,11 +307,10 @@ struct CFileLocationExt : public CFileLocation {
 //         offset      - Offset into pack file.  0 if not a packfile.
 // Returns: If not found returns -1, else returns offset into ext_list.
 // (NOTE: This function is exponentially slow, so don't use it unless truely needed!!)
-CFileLocationExt cf_find_file_location_ext(const char* filename, const int ext_num, const char** ext_list, int pathtype,
-                                           bool localize = false);
+int cf_find_file_location_ext(char *filename, const int ext_num, const char **ext_list, int pathtype, int max_out = 0, char *pack_filename = NULL, int *size = NULL, int *offset = NULL, bool localize = false);

 // Functions to change directories
-int cfile_chdir(const char *dir);
+int cfile_chdir(char *dir);

 #ifdef _WIN32
 int cfile_chdrive(int DriveNum, int flag);
@@ -432,57 +322,5 @@ int cfile_push_chdir(int type);
 // restore directory on top of the stack
 int cfile_pop_dir();

-int cfile_get_path_type(const SCP_string& dir);
-
-namespace cfile
-{
-	// exceptions and other errors
-	class cfile_error : public std::exception
-	{
-		public:
-			cfile_error() : m_excuse("CFILE Exception")
-			{
-			}
-
-			explicit cfile_error(const std::string &excuse) : m_excuse(excuse)
-			{
-			}
-
-			~cfile_error() SCP_NOEXCEPT override {}
-
-			const char *what() const SCP_NOEXCEPT override {
-				return m_excuse.c_str();
-			}
-
-		private:
-			std::string m_excuse;
-	};
-
-	class max_read_length : public cfile_error
-	{
-		public:
-		explicit max_read_length(const std::string &excuse) : cfile_error(excuse)
-			{
-			}
-
-			max_read_length() : cfile_error("Attempted to read beyond length limit")
-			{
-			}
-	};
-
-}
-
-// This allows to use std::unique_ptr with CFILE
-namespace std {
-template <>
-struct default_delete<CFILE> {
-	void operator()(CFILE* ptr)
-	{
-		if (cf_is_valid(ptr)) {
-			cfclose(ptr);
-		}
-	}
-};
-} // namespace std

 #endif	/* __CFILE_H__ */
@@ -11,9 +11,9 @@

 #define _CFILE_INTERNAL 

-#include <cstdlib>
-#include <cstring>
-#include <cstdio>
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>

 #ifdef _WIN32
 #include <io.h>
@@ -26,30 +26,32 @@
 #include "cfile/cfilearchive.h"
 #include "luaconf.h"

-#include <sstream>
-#include <limits>
-

 #define CHECK_POSITION

 // Called once to setup the low-level reading code.

-void cf_init_lowlevel_read_code( CFILE * cfile, size_t lib_offset, size_t size, size_t pos )
+void cf_init_lowlevel_read_code( CFILE * cfile, int lib_offset, int size, int pos )
 {
-	Assert(cfile != nullptr);
+	Assert(cfile != NULL);

-	cfile->lib_offset = lib_offset;
-	cfile->raw_position = pos;
-	cfile->size = size;
+	Cfile_block *cb;
+	Assert(cfile->id >= 0 && cfile->id < MAX_CFILE_BLOCKS);
+	cb = &Cfile_block_list[cfile->id];	

-	if ( cfile->fp )	{
-		if ( cfile->lib_offset )	{
-			fseek( cfile->fp, (long)cfile->lib_offset, SEEK_SET );
+	cb->lib_offset = lib_offset;
+	cb->raw_position = pos;
+	cb->size = size;
+
+	if ( cb->fp )	{
+		if ( cb->lib_offset )	{
+			fseek( cb->fp, cb->lib_offset, SEEK_SET );
 		}

 		#if defined(CHECK_POSITION) && !defined(NDEBUG)
-		auto raw_position = ftell(cfile->fp) - cfile->lib_offset;
-		Assert(raw_position == cfile->raw_position);
+			int raw_position;
+			raw_position = ftell(cb->fp) - cb->lib_offset;
+			Assert(raw_position == cb->raw_position);
 		#endif
 	}
 }
@@ -66,16 +68,26 @@ int cfeof(CFILE *cfile)
 {
 	Assert(cfile != NULL);

-	int result = 0;
+	Cfile_block *cb;
+	Assert(cfile->id >= 0 && cfile->id < MAX_CFILE_BLOCKS);
+	cb = &Cfile_block_list[cfile->id];	
+
+	int result;
+
+	result = 0;
+
+	// cfeof() not supported for memory-mapped files
+	Assert( !cb->data );
+
+	Assert(cb->fp != NULL);

 	#if defined(CHECK_POSITION) && !defined(NDEBUG)
-    if (cfile->fp) {
-		auto raw_position = ftell(cfile->fp) - cfile->lib_offset;
-		Assert(raw_position == cfile->raw_position);
-	}
+		int raw_position;
+		raw_position = ftell(cb->fp) - cb->lib_offset;
+		Assert(raw_position == cb->raw_position);
 	#endif
 		
-	if (cfile->raw_position >= cfile->size ) {
+	if (cb->raw_position >= cb->size ) {
 		result = 1;
 	} else {
 		result = 0;
@@ -92,18 +104,22 @@ int cfeof(CFILE *cfile)
 int cftell( CFILE * cfile )
 {
 	Assert(cfile != NULL);
+	Cfile_block *cb;
+	Assert(cfile->id >= 0 && cfile->id < MAX_CFILE_BLOCKS);
+	cb = &Cfile_block_list[cfile->id];	
+
+	// Doesn't work for memory mapped files
+	Assert( !cb->data );
+
+	Assert(cb->fp != NULL);

 	#if defined(CHECK_POSITION) && !defined(NDEBUG)
-    if (cfile->fp) {
-		auto raw_position = ftell(cfile->fp) - cfile->lib_offset;
-		Assert(raw_position == cfile->raw_position);
-	}
+		int raw_position;
+		raw_position = ftell(cb->fp) - cb->lib_offset;
+		Assert(raw_position == cb->raw_position);
 	#endif

-	// The rest of the code still uses ints, do an overflow check to detect cases where this fails
-	Assertion(cfile->raw_position <= static_cast<size_t>(std::numeric_limits<int>::max()),
-		"Integer overflow in cftell, a file is probably too large (but I don't know which one).");
-	return (int) cfile->raw_position;
+	return cb->raw_position;
 }


@@ -116,48 +132,41 @@ int cfseek( CFILE *cfile, int offset, int where )
 {

 	Assert(cfile != NULL);
+	Cfile_block *cb;
+	Assert(cfile->id >= 0 && cfile->id < MAX_CFILE_BLOCKS);
+	cb = &Cfile_block_list[cfile->id];	
+

 	// TODO: seek to offset in memory mapped file
-	Assert( !cfile->mem_mapped );
+	Assert( !cb->data );
+	Assert( cb->fp != NULL );
 	
-	size_t goal_position;
+	int goal_position;

 	switch( where )	{
 	case CF_SEEK_SET:
-		goal_position = offset+cfile->lib_offset;
+		goal_position = offset+cb->lib_offset;
 		break;
 	case CF_SEEK_CUR:	
 		{
-			goal_position = cfile->raw_position+offset+cfile->lib_offset;
+			goal_position = cb->raw_position+offset+cb->lib_offset;
 		}
 		break;
 	case CF_SEEK_END:
-		goal_position = cfile->size+offset+cfile->lib_offset;
+		goal_position = cb->size+offset+cb->lib_offset;
 		break;
 	default:
 		Int3();
 		return 1;
-	}
+	}	

-	// Make sure we don't seek beyond the end of the file
-	CAP(goal_position, cfile->lib_offset, cfile->lib_offset + cfile->size);
-
-	int result = 0;
-
-	if (cfile->fp) {
-		// If we have a file pointer we can also seek in that file
-		result = fseek(cfile->fp, (long)goal_position, SEEK_SET );
-		Assertion(goal_position >= cfile->lib_offset, "Invalid offset values detected while seeking! Goal was " SIZE_T_ARG ", lib_offset is " SIZE_T_ARG ".", goal_position, cfile->lib_offset);
-	}
-	// If we only have a data pointer this will do all the work
-	cfile->raw_position = goal_position - cfile->lib_offset;
-	Assertion(cfile->raw_position <= cfile->size, "Invalid raw_position value detected!");
+	int result = fseek(cb->fp, goal_position, SEEK_SET );
+	cb->raw_position = goal_position - cb->lib_offset;

 	#if defined(CHECK_POSITION) && !defined(NDEBUG)
-	if (cfile->fp) {
-		auto tmp_offset = ftell(cfile->fp) - cfile->lib_offset;
-		Assert(tmp_offset == cfile->raw_position);
-	}
+		int tmp_offset;
+		tmp_offset = (int)ftell(cb->fp) - cb->lib_offset;
+		Assert(tmp_offset==cb->raw_position);
 	#endif

 	return result;	
@@ -174,50 +183,40 @@ int cfread(void *buf, int elsize, int nelem, CFILE *cfile)
 	if(!cf_is_valid(cfile))
 		return 0;

-	size_t size = elsize*nelem;
+	int size = elsize*nelem;

 	if(buf == NULL || size <= 0)
 		return 0;

-	if ( (cfile->raw_position+size) > cfile->size ) {
-		Assertion(cfile->raw_position <= cfile->size, "Invalid raw_position value detected!");
-		size = cfile->size - cfile->raw_position;
+	Cfile_block *cb = &Cfile_block_list[cfile->id];	
+
+	// cfread() not supported for memory-mapped files
+	if(cb->data != NULL)
+	{
+		Warning(LOCATION, "Writing is not supported for mem-mapped files");
+		return 0;
+	}
+
+	if ( (cb->raw_position+size) > cb->size ) {
+		size = cb->size - cb->raw_position;
 		if ( size < 1 ) {
 			return 0;
 		}
 		//mprintf(( "CFILE: EOF encountered in file\n" ));
 	}

-	if (cfile->max_read_len) {
-		if ( cfile->raw_position+size > cfile->max_read_len ) {
-			std::ostringstream s_buf;
-			s_buf << "Attempted to read " << size << "-byte(s) beyond length limit";
-
-			throw cfile::max_read_length(s_buf.str());
-		}
-	}
-
-	size_t bytes_read;
-	if (cfile->data != nullptr) {
-		// This is a file from memory
-		bytes_read = size;
-		memcpy(buf, reinterpret_cast<const char*>(cfile->data) + cfile->raw_position, size);
-	} else {
-		bytes_read = fread( buf, 1, size, cfile->fp );
-	}
+	int bytes_read = fread( buf, 1, size, cb->fp );
 	if ( bytes_read > 0 )	{
-		cfile->raw_position += bytes_read;
-		Assertion(cfile->raw_position <= cfile->size, "Invalid raw_position value detected!");
+		cb->raw_position += bytes_read;
 	}		

 	#if defined(CHECK_POSITION) && !defined(NDEBUG)
-    if (cfile->fp) {
-		auto tmp_offset = ftell(cfile->fp) - cfile->lib_offset;
-		Assert(tmp_offset==cfile->raw_position);
-	}
+		int tmp_offset;
+		tmp_offset = ftell(cb->fp) - cb->lib_offset;
+		Assert(tmp_offset==cb->raw_position);
 	#endif

-	return (int)(bytes_read / elsize);
+	return bytes_read / elsize;

 }

@@ -229,38 +228,23 @@ int cfread_lua_number(double *buf, CFILE *cfile)
 	if(buf == NULL)
 		return 0;

+	Cfile_block *cb = &Cfile_block_list[cfile->id];	
+
 	// cfread() not supported for memory-mapped files
-	if(cfile->data != nullptr)
+	if(cb->data != NULL)
 	{
 		Warning(LOCATION, "Writing is not supported for mem-mapped files");
 		return 0;
 	}

-	size_t advance = 0;
-	int items_read;
-	if (cfile->fp) {
-		long orig_pos = ftell(cfile->fp);
-		items_read = fscanf(cfile->fp, LUA_NUMBER_SCAN, buf);
-		advance = (size_t) (ftell(cfile->fp)-orig_pos);
-	} else {
-		int read;
-		// %n returns the number of bytes currently read so we append that to the scan format at the end so it will return
-		// how many bytes we have consumed
-		items_read = sscanf(reinterpret_cast<const char*>(cfile->data), LUA_NUMBER_SCAN "%n", buf, &read);
-		if (items_read == 2) {
-			// We need to correct the items read counter since we read one additional item
-			items_read = 1;
-		}
-		advance = (size_t) read;
-	}
-	cfile->raw_position += advance;
-	Assertion(cfile->raw_position <= cfile->size, "Invalid raw_position value detected!");
+	long orig_pos = ftell(cb->fp);
+	int items_read = fscanf(cb->fp, LUA_NUMBER_SCAN, buf);
+	cb->raw_position += ftell(cb->fp)-orig_pos;		

 	#if defined(CHECK_POSITION) && !defined(NDEBUG)
-    if (cfile->fp) {
-		auto tmp_offset = ftell(cfile->fp) - cfile->lib_offset;
-		Assert(tmp_offset==cfile->raw_position);
-	}
+		int tmp_offset;
+		tmp_offset = ftell(cb->fp) - cb->lib_offset;
+		Assert(tmp_offset==cb->raw_position);
 	#endif

 	return items_read;
@@ -22,32 +22,29 @@
 #define CFILE_BLOCK_UNUSED		0
 #define CFILE_BLOCK_USED		1

-struct CFILE {
-	int type = CFILE_BLOCK_UNUSED;                // CFILE_BLOCK_UNUSED, CFILE_BLOCK_USED
-	int dir_type;        // directory location
-	FILE* fp;                // File pointer if opening an individual file
-	const void* data;            // Pointer for memory-mapped file access.  NULL if not mem-mapped.
-	bool mem_mapped; // Flag for memory mapped files (if data is not null and this is false it means that it's an embedded file)
+typedef struct Cfile_block {
+	int		type;				// CFILE_BLOCK_UNUSED, CFILE_BLOCK_USED
+	int		dir_type;		// directory location
+	FILE		*fp;				// File pointer if opening an individual file
+	void		*data;			// Pointer for memory-mapped file access.  NULL if not mem-mapped.
 #ifdef _WIN32
 	HANDLE	hInFile;			// Handle from CreateFile()
 	HANDLE	hMapFile;		// Handle from CreateFileMapping()
 #else
-	size_t data_length;    // length of data for mmap
+//	int		fd;				// file descriptor
+	size_t	data_length;	// length of data for mmap
 #endif
-	size_t lib_offset;
-	size_t raw_position;
-	size_t size;                // for packed files
-
-	size_t max_read_len;    // max read offset, for special error handling
-
-	const char* source_file;
-	int line_num;
-};
+	int		lib_offset;
+	int		raw_position;
+	int		size;				// for packed files
+	
+} Cfile_block;

 #define MAX_CFILE_BLOCKS	64
-extern std::array<CFILE, MAX_CFILE_BLOCKS> Cfile_block_list;
+extern Cfile_block Cfile_block_list[MAX_CFILE_BLOCKS];
+extern CFILE Cfile_list[MAX_CFILE_BLOCKS];

 // Called once to setup the low-level reading code.
-void cf_init_lowlevel_read_code( CFILE * cfile, size_t lib_offset, size_t size, size_t pos );
+void cf_init_lowlevel_read_code( CFILE * cfile, int lib_offset, int size, int pos );

 #endif
@@ -9,11 +9,9 @@



-#include <cstdlib>
-#include <cstring>
-#include <cstdio>
-#include <string>
-#include <algorithm>
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>

 #ifdef _WIN32
 #include <io.h>
@@ -22,88 +20,11 @@
 #include <winbase.h>		/* needed for memory mapping of file functions */
 #endif

-#include "cfile/cfile.h"
 #include "globalincs/pstypes.h"
+#include "cfile/cfile.h"


-void cf_sort_filenames( SCP_vector<SCP_string> &list, int sort, SCP_vector<file_list_info> *info )
-{
-	// NOTE: This really needs to be updated to C++ style sorting at some point

-	int i, j, incr;
-	SCP_string t;
-	file_list_info tt;
-
-	int n = (int)list.size();
-
-	if (sort == CF_SORT_NAME) {
-		incr = n / 2;
-		while (incr > 0) {
-			for (i=incr; i<n; i++) {
-				j = i - incr;
-				while (j >= 0) {
-					if (stricmp(list[j].c_str(), list[j + incr].c_str()) > 0) {
-						t = list[j];
-						list[j] = list[j + incr];
-						list[j + incr] = t;
-
-						if (info) {
-							tt = (*info)[j];
-							(*info)[j] = (*info)[j + incr];
-							(*info)[j + incr] = tt;
-						}
-
-						j -= incr;
-
-					} else
-						break;
-				}
-			}
-
-			incr /= 2;
-		}
-
-		return;
-
-	} else if (sort == CF_SORT_TIME) {
-		Assert(info);
-		incr = n / 2;
-		while (incr > 0) {
-			for (i=incr; i<n; i++) {
-				j = i - incr;
-				while (j >= 0) {
-					if ( (*info)[j].write_time < (*info)[j + incr].write_time ) {
-						t = list[j];
-						list[j] = list[j + incr];
-						list[j + incr] = t;
-
-						tt = (*info)[j];
-						(*info)[j] = (*info)[j + incr];
-						(*info)[j + incr] = tt;
-						j -= incr;
-
-					} else
-						break;
-				}
-			}
-
-			incr /= 2;
-		}
-
-		return;
-
-	} else if (sort == CF_SORT_REVERSE) {
-		std::reverse( list.begin(), list.end() );
-
-		if (info) {
-			std::reverse( info->begin(), info->end() );
-		}
-
-		return;
-	}
-
-	nprintf(("Error", "Unknown sorting method %d passed to cf_sort_filenames()\n", sort));
-}

 // Sorts a list of filenames using the specified sorting method (CF_SORT_*).
 //   n = number of filenames in list to sort
@@ -200,4 +121,353 @@ void cf_sort_filenames( int n, char **list, int sort, file_list_info *info )
 	}

 	nprintf(("Error", "Unknown sorting method %d passed to cf_sort_filenames()\n", sort));
-}
+}
+
+
+#if (0) // these aren't used anywhere now
+
+//	cf_compress - Do Run Length Compression on a block of data. Targa format.
+//
+//	Usage:
+//				out			Buffer to write it out to
+//				in				Buffer to compress
+//				bytecount	Number of bytes input
+int cf_compress(char *out, char *in, int bytecount )
+{
+	int pixcount;		// number of pixels in the current packet
+	char *inputpixel=NULL;	// current input pixel position
+	char *matchpixel=NULL;	// pixel value to match for a run
+	char *flagbyte=NULL;		// location of last flag byte to set
+	int rlcount;		// current count in r.l. string 
+	int rlthresh;		// minimum valid run length
+	char *copyloc;		// location to begin copying at
+
+	// set the threshold -- the minimum valid run length
+	rlthresh = 2;					// Require a 2 pixel span before rle'ing
+	
+	// set the first pixel up
+
+	flagbyte = out;	// place to put next flag if run
+	inputpixel = in;
+	pixcount = 1;
+	rlcount = 0;
+	copyloc = (char *)0;
+
+	// loop till data processing complete
+	do	{
+
+		// if we have accumulated a 128-byte packet, process it
+		if ( pixcount == 129 )	{
+			*flagbyte = 127;
+
+			// set the run flag if this is a run
+
+			if ( rlcount >= rlthresh )	{
+					*flagbyte |= 0x80;
+					pixcount = 2;
+			}
+
+			// copy the data into place
+			++flagbyte;
+			memmove( flagbyte, copyloc, pixcount-1 );
+			flagbyte += pixcount-1;
+			pixcount = 1;
+
+			// set up for next packet
+			continue;
+		}
+
+		// if zeroth byte, handle as special case
+		if ( pixcount == 1 )	{
+			rlcount = 0;
+			copyloc = inputpixel;		/* point to 1st guy in packet */
+			matchpixel = inputpixel;	/* set pointer to pix to match */
+			pixcount = 2;
+			inputpixel += 1;
+			continue;
+		}
+
+		// assembling a packet -- look at next pixel
+
+		// current pixel == match pixel?
+		if ( *inputpixel == *matchpixel )	{
+
+			//	establishing a run of enough length to
+			//	save space by doing it
+			//		-- write the non-run length packet
+			//		-- start run-length packet
+
+			if ( ++rlcount == rlthresh )	{
+				
+				//	close a non-run packet
+				
+				if ( pixcount > (rlcount+1) )	{
+					// write out length and do not set run flag
+
+					*flagbyte++ = (char)(pixcount - 2 - rlthresh);
+
+					memmove(flagbyte, copyloc, (pixcount-1-rlcount) );
+					flagbyte += (pixcount-1-rlcount);
+
+					copyloc = inputpixel;
+					pixcount = rlcount + 1;
+				}
+			}
+		} else {
+
+			// no match -- either break a run or continue without one
+			//	if a run exists break it:
+			//		write the bytes in the string (1+1)
+			//		start the next string
+
+			if ( rlcount >= rlthresh )	{
+
+				*flagbyte++ = (char)(0x80 | rlcount);
+				memmove(flagbyte, copyloc, 1 );
+				flagbyte += 1;
+				pixcount = 1;
+				continue;
+			} else {
+
+				//	not a match and currently not a run
+				//		- save the current pixel
+				//		- reset the run-length flag
+				rlcount = 0;
+				matchpixel = inputpixel;
+			}
+		}
+		pixcount++;
+		inputpixel += 1;
+	} while ( inputpixel < (in + bytecount));
+
+	// quit this buffer without loosing any data
+	if ( --pixcount >= 1 )	{
+		*flagbyte = (char)(pixcount - 1);
+		if ( rlcount >= rlthresh )	{
+			*flagbyte |= 0x80;
+			pixcount = 1;
+		}
+
+		// copy the data into place
+		++flagbyte;
+		memmove(flagbyte, copyloc, pixcount );
+		flagbyte += pixcount;
+	}
+	return(flagbyte-out);
+}
+
+
+//	cf_decompress - Do Decompression on a run-length encoded block of data. Targa format.
+//
+//	Usage:
+//				out			Buffer to write it out to
+//				in				Buffer to compress
+//				bytecount	Number of bytes input
+int cf_decompress(char *out, char *in )
+{
+	int count;
+
+	char *param_out = out;
+
+	while(1)	{
+	
+		count = int(*in++);
+		int run_span = count & 0x80;
+
+		count &= (~0x80);
+
+		if ( count > 0 )	{
+			if ( run_span )	{
+				// RLE'd data
+				ubyte c = *in++;
+
+				memset( out, c, count );
+				out += count;
+			} else {
+				memmove( out, in, count );
+				in += count;
+				out += count;
+			}
+		}
+	}
+
+	return out - param_out;
+			
+}
+
+#endif // 0
+
+
+// cfread() reads from a file and decompresses it
+//
+// returns:   returns the number of full elements read
+//            
+//
+int cfread_compressed(void *buf, int elsize, int nelem, CFILE *cfile)
+{
+	char *out = (char *)buf;
+	
+	while(1)	{
+
+		ubyte count;
+
+		if ( cfread( &count, 1, 1, cfile ) != 1 )	{
+			break;
+		}
+
+		int run_span = count & 0x80;
+		count &= (~0x80);
+		count++;
+
+		if ( count > 0 )	{
+			if ( run_span )	{
+				// RLE'd data
+				ubyte c;
+				if ( cfread( &c, 1, 1, cfile ) != 1 )	{
+					break;
+				}
+				memset( out, c, count );
+			} else {
+				if ( cfread( out, 1, count, cfile ) != count )	{
+					break;
+				}
+			}
+			out += count;
+			if ( out >= (char *)buf + (elsize*nelem))	{
+				break;
+			}
+		} else {
+			break;
+		}
+	}
+
+	return (out - (char *)buf)/elsize;
+}
+
+int cfwrite_compressed(void *param_buf, int param_elsize, int param_nelem, CFILE *cfile)
+{
+	char *in = (char *)param_buf;
+	int bytecount = (param_elsize * param_nelem );
+
+	int pixcount;		// number of pixels in the current packet
+	char *inputpixel=NULL;	// current input pixel position
+	char *matchpixel=NULL;	// pixel value to match for a run
+	int rlcount;		// current count in r.l. string 
+	int rlthresh;		// minimum valid run length
+	char *copyloc;		// location to begin copying at
+
+	// set the threshold -- the minimum valid run length
+	rlthresh = 2;					// Require a 2 pixel span before rle'ing
+	
+	// set the first pixel up
+
+	inputpixel = in;
+	pixcount = 1;
+	rlcount = 0;
+	copyloc = (char *)0;
+
+	// loop till data processing complete
+	do	{
+
+		// if we have accumulated a 128-byte packet, process it
+		if ( pixcount == 129 )	{
+			ubyte code = 127;
+
+			// set the run flag if this is a run
+
+			if ( rlcount >= rlthresh )	{
+					code |= 0x80;
+					pixcount = 2;
+			}
+
+			cfwrite( &code, 1, 1, cfile );
+
+			// copy the data into place
+			cfwrite( copyloc, 1, pixcount-1, cfile );
+			pixcount = 1;
+
+			// set up for next packet
+			continue;
+		}
+
+		// if zeroth byte, handle as special case
+		if ( pixcount == 1 )	{
+			rlcount = 0;
+			copyloc = inputpixel;		/* point to 1st guy in packet */
+			matchpixel = inputpixel;	/* set pointer to pix to match */
+			pixcount = 2;
+			inputpixel += 1;
+			continue;
+		}
+
+		// assembling a packet -- look at next pixel
+
+		// current pixel == match pixel?
+		if ( *inputpixel == *matchpixel )	{
+
+			//	establishing a run of enough length to
+			//	save space by doing it
+			//		-- write the non-run length packet
+			//		-- start run-length packet
+
+			if ( ++rlcount == rlthresh )	{
+				
+				//	close a non-run packet
+				
+				if ( pixcount > (rlcount+1) )	{
+					// write out length and do not set run flag
+
+					ubyte code = (ubyte)(pixcount - 2 - rlthresh);
+					cfwrite( &code, 1, 1, cfile );
+
+					cfwrite( copyloc, 1, (pixcount-1-rlcount), cfile );
+					copyloc = inputpixel;
+					pixcount = rlcount + 1;
+				}
+			}
+		} else {
+
+			// no match -- either break a run or continue without one
+			//	if a run exists break it:
+			//		write the bytes in the string (1+1)
+			//		start the next string
+
+			if ( rlcount >= rlthresh )	{
+
+				ubyte code = (ubyte)(0x80 | rlcount);
+				cfwrite( &code, 1, 1, cfile );
+				cfwrite( copyloc, 1, 1, cfile );
+				pixcount = 1;
+				continue;
+			} else {
+
+				//	not a match and currently not a run
+				//		- save the current pixel
+				//		- reset the run-length flag
+				rlcount = 0;
+				matchpixel = inputpixel;
+			}
+		}
+		pixcount++;
+		inputpixel += 1;
+	} while ( inputpixel < (in + bytecount));
+
+	// quit this buffer without loosing any data
+	if ( --pixcount >= 1 )	{
+		ubyte code = ubyte(pixcount - 1);
+
+		// set the run flag if this is a run
+
+		if ( rlcount >= rlthresh )	{
+				code |= 0x80;
+				pixcount = 1;
+		}
+
+		cfwrite( &code, 1, 1, cfile );
+
+		// copy the data into place
+		cfwrite( copyloc, 1, pixcount, cfile );
+	}
+
+	return param_nelem;
+}
@@ -1,266 +0,0 @@
-#define _CFILE_INTERNAL
-
-#include "cfilemod.h"
-#include "cfile.h"
-#include "cmdline/cmdline.h"
-#include "osapi/osapi.h"
-#include "cfilesystem.h"
-
-#ifdef SCP_UNIX
-#include <glob.h>
-#include <sys/types.h>
-#include <dirent.h>
-#include <fnmatch.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <libgen.h>
-#endif
-
-namespace cfile {
-
-namespace {
-
-typedef struct cf_root_sort {
-	SCP_string path;
-	int cf_type;
-} cf_root_sort;
-
-// packfile sort function
-bool cf_packfile_sort_func(const cf_root_sort& r1, const cf_root_sort& r2) {
-	// if the 2 directory types are the same, do a string compare
-	if (r1.cf_type == r2.cf_type) {
-		return (stricmp(r1.path.c_str(), r2.path.c_str()) < 0);
-	}
-
-	// otherwise return them in order of CF_TYPE_* precedence
-	return (r1.cf_type < r2.cf_type);
-}
-
-// Go through a root and look for pack files
-void build_pack_list(SCP_vector<ModRoot>& mod_roots,
-                     const SCP_string& search_path,
-                     LocationType location_type,
-                     bool user_location) {
-	char filespec[MAX_PATH_LEN];
-
-	// allocate a temporary array of temporary roots so we can easily sort them
-	SCP_vector<cf_root_sort> temp_roots_sort;
-
-	// now just setup all the root info
-	for (int i = CF_TYPE_ROOT; i < CF_MAX_PATH_TYPES; i++) {
-		strcpy_s(filespec, search_path.c_str());
-
-		if (strlen(Pathtypes[i].path)) {
-			strcat_s(filespec, Pathtypes[i].path);
-
-			if (filespec[strlen(filespec) - 1] != DIR_SEPARATOR_CHAR)
-				strcat_s(filespec, DIR_SEPARATOR_STR);
-		}
-
-#if defined _WIN32
-			strcat_s( filespec, "*.vp" );
-
-		intptr_t find_handle;
-		_finddata_t find;
-
-		find_handle = _findfirst( filespec, &find );
-
-		 if (find_handle != -1) {
-			do {
-				// add the new item
-				if (!(find.attrib & _A_SUBDIR)) {
-
-					// get a temp pointer
-					rptr_sort = &temp_roots_sort[root_index++];
-
-					// fill in all the proper info
-					strcpy_s(rptr_sort->path, root->path);
-
-					if(strlen(Pathtypes[i].path)) {
-
-						strcat_s(rptr_sort->path, Pathtypes[i].path );
-						strcat_s(rptr_sort->path, DIR_SEPARATOR_STR);
-					}
-
-					strcat_s(rptr_sort->path, find.name );
-					rptr_sort->roottype = CF_ROOTTYPE_PACK;
-					rptr_sort->cf_type = i;
-				}
-
-			} while (!_findnext(find_handle, &find));
-
-			_findclose( find_handle );
-		}
-#elif defined SCP_UNIX
-		strcat_s(filespec, "*.[vV][pP]");
-		glob_t globinfo;
-
-		memset(&globinfo, 0, sizeof(globinfo));
-
-		int status = glob(filespec, 0, NULL, &globinfo);
-
-		if (status == 0) {
-			for (uint j = 0; j < globinfo.gl_pathc; j++) {
-				// Determine if this is a regular file
-				struct stat statbuf;
-				memset(&statbuf, 0, sizeof(statbuf));
-				stat(globinfo.gl_pathv[j], &statbuf);
-
-				if (S_ISREG(statbuf.st_mode)) {
-
-					cf_root_sort sort;
-
-					// fill in all the proper info
-					sort.path = globinfo.gl_pathv[j];
-					sort.cf_type = i;
-					temp_roots_sort.push_back(sort);
-				}
-			}
-
-			globfree(&globinfo);
-		}
-#endif
-	}
-
-	// sort the roots
-	std::sort(temp_roots_sort.begin(), temp_roots_sort.end(), cf_packfile_sort_func);
-
-	// now insert them all into the real root list properly
-	for (const auto& pack_root : temp_roots_sort) {
-		ModRoot root;
-		root.type = ModRootType::Package;
-		root.path = pack_root.path;
-		root.user_location = user_location;
-		root.location_type = location_type;
-
-		mod_roots.push_back(root);
-	}
-}
-
-char normalize_directory_separator(char in) {
-	if (in == '/') {
-		return DIR_SEPARATOR_CHAR;
-	}
-
-	return in;
-}
-
-void
-add_mod_roots(SCP_vector<ModRoot>& mod_roots, const char* mod_cmdline, const SCP_string& rootDirectory, bool user_location) {
-	if (mod_cmdline) {
-		bool primary = true;
-		for (const char* cur_pos = mod_cmdline; strlen(cur_pos) != 0; cur_pos += (strlen(cur_pos) + 1)) {
-			SCP_stringstream ss;
-			ss << rootDirectory;
-
-			if (rootDirectory.back() != DIR_SEPARATOR_CHAR) {
-				ss << DIR_SEPARATOR_CHAR;
-			}
-
-			ss << cur_pos << DIR_SEPARATOR_STR;
-
-			SCP_string rootPath = ss.str();
-
-			// normalize the path to the native path format
-			std::transform(rootPath.begin(), rootPath.end(), rootPath.begin(), normalize_directory_separator);
-
-			ModRoot root;
-			root.type = ModRootType::Folder;
-			root.path = rootPath;
-			root.user_location = user_location;
-
-			if (primary) {
-				root.location_type = LocationType::PrimaryMod;
-			} else {
-				root.location_type = LocationType::SecondaryMod;
-			}
-
-			mod_roots.push_back(root);
-
-			build_pack_list(mod_roots, rootPath, root.location_type, user_location);
-
-			primary = false;
-		}
-	}
-}
-
-}
-
-SCP_vector<ModRoot> getModRootsFromModCmdline(const SCP_string& content_root, const char* mod_cmdline) {
-	SCP_vector<ModRoot> mod_roots;
-
-	if (os_is_legacy_mode()) {
-		// =========================================================================
-#ifdef WIN32
-		// Nothing to do here, Windows uses the current directory as the base
-#else
-		add_mod_roots(mod_roots, mod_cmdline, os_get_legacy_user_dir(), true);
-
-		ModRoot root;
-		root.type = ModRootType::Folder;
-		root.path = os_get_legacy_user_dir();
-		root.user_location = true;
-		root.location_type = LocationType::GameRoot;
-
-		// do we already have a slash? as in the case of a root directory install
-		if (root.path.back() != DIR_SEPARATOR_CHAR) {
-			root.path += DIR_SEPARATOR_STR;        // put trailing backslash on for easier path construction
-		}
-
-		mod_roots.push_back(root);
-
-		// Next, check any VP files under the current directory.
-		build_pack_list(mod_roots, root.path, root.location_type, root.user_location);
-#endif
-		// =========================================================================
-	} else if (!Cmdline_portable_mode) {
-		// =========================================================================
-		// now look for mods under the users HOME directory to use before system ones
-		add_mod_roots(mod_roots, mod_cmdline, os_get_config_path(), true);
-		// =========================================================================
-
-		// =========================================================================
-		// set users HOME directory as default for loading and saving files
-		ModRoot root;
-		root.type = ModRootType::Folder;
-		root.path = os_get_config_path();
-		root.user_location = true;
-		root.location_type = LocationType::GameRoot;
-
-		// do we already have a slash? as in the case of a root directory install
-		if (root.path.back() != DIR_SEPARATOR_CHAR) {
-			root.path += DIR_SEPARATOR_STR;        // put trailing backslash on for easier path construction
-		}
-
-		mod_roots.push_back(root);
-
-		// Next, check any VP files under the current directory.
-		build_pack_list(mod_roots, root.path, root.location_type, root.user_location);
-		// =========================================================================
-	}
-
-	add_mod_roots(mod_roots, mod_cmdline, content_root, false);
-
-	ModRoot root;
-	root.type = ModRootType::Folder;
-	root.path = content_root;
-	root.user_location = false;
-	root.location_type = LocationType::GameRoot;
-
-	// do we already have a slash? as in the case of a root directory install
-	if (root.path.back() != DIR_SEPARATOR_CHAR) {
-		root.path += DIR_SEPARATOR_STR;        // put trailing backslash on for easier path construction
-	}
-
-	mod_roots.push_back(root);
-
-	//======================================================
-	// Next, check any VP files under the current directory.
-	build_pack_list(mod_roots, root.path, root.location_type, root.user_location);
-
-	return mod_roots;
-}
-
-}
-
-
@@ -1,10 +0,0 @@
-#pragma once
-
-#include "globalincs/pstypes.h"
-#include "cfile/cfile.h"
-
-namespace cfile {
-
-SCP_vector<ModRoot> getModRootsFromModCmdline(const SCP_string& content_root, const char* mod_cmdline);
-
-}
Author	SHA1	Message	Date
karajorma	f475ae983e	Sync with Trunk (Part IV)	2010-09-20 08:21:41 +00:00
karajorma	3be57f609e	Sync with Trunk (Part III)	2010-09-20 08:06:39 +00:00
karajorma	fc66e2f78b	Sync with Trunk (Part II) - I knew I'd miss something.	2010-09-20 07:17:50 +00:00
karajorma	1afadaa142	Sync with Trunk (Part I)	2010-09-20 05:49:34 +00:00
karajorma	1583b74c9d	Missed that somehow.	2010-03-04 09:53:05 +00:00
karajorma	e8ba07ee43	Sync with trunk	2010-03-02 05:25:56 +00:00
karajorma	7f706d398f	Revert the Toggle Behaviour When Crippled flag as it's not good enough really. I'll add a better solution later.	2010-03-01 14:57:43 +00:00
karajorma	7b50be4afb	Sync with trunk	2010-02-24 03:27:01 +00:00
karajorma	f690e124d0	These should have been removed.	2010-02-23 13:50:27 +00:00
karajorma	df6e87f552	As promised, a much better fix for the issue of ships losing orders/getting protected as soon as something has disarm/disable orders.	2010-02-23 13:49:15 +00:00
karajorma	45305bf78f	Sync with trunk	2010-02-19 04:44:25 +00:00
karajorma	e6f640c53d	Sync with trunk	2009-11-02 07:12:36 +00:00
karajorma	4f1d39ed0e	Sync with trunk	2009-07-19 09:42:46 +00:00
karajorma	a7570926c9	Some minor changes which appear to have slipped into one codebase but not the other.	2009-07-18 17:48:22 +00:00
karajorma	aa481d7463	Sync with trunk	2009-07-18 17:26:06 +00:00
karajorma	e79afa5b65	Fix a couple of typos other people made. One minor, one not so minor.	2009-07-15 21:50:23 +00:00
karajorma	b69a80db90	Sync with trunk	2009-07-15 21:29:08 +00:00
karajorma	5f64b680f5	Sync with trunk	2009-07-10 17:20:11 +00:00
karajorma	a3508be54a	Sync with the right branch this time!	2009-07-05 20:55:42 +00:00
karajorma	0fede5f475	Revert last sync	2009-07-05 20:47:25 +00:00
karajorma	a8c36b9654	Sync with trunk	2009-07-05 20:30:57 +00:00
karajorma	8c98287b39	Sync with trunk	2009-07-02 17:21:49 +00:00
karajorma	345fa9c3ac	Sync with trunk again	2009-06-30 22:09:08 +00:00
karajorma	cf483e0237	Sync with trunk	2009-06-30 07:20:30 +00:00
karajorma	f40710f500	Mark Selected Ships via information in FRED too as this is more likely to still be used rather than the slow wireframe marking.	2009-06-27 12:34:25 +00:00
karajorma	9f162d813f	Sync with trunk	2009-06-22 20:17:00 +00:00
karajorma	3edee14eea	Sync with trunk	2009-06-14 16:09:49 +00:00
karajorma	82757763e6	Sync with trunk	2009-06-06 10:51:02 +00:00
karajorma	91346a814d	Sync with trunk	2009-05-24 22:01:10 +00:00
karajorma	5f013ad41d	Allow lua to send variable changes from client to server.	2009-05-24 15:42:19 +00:00
karajorma	00cd5490c4	Sync with trunk	2009-05-21 14:59:36 +00:00
karajorma	a4542cf71b	Fix a newline issue with skybox flags.	2009-05-21 14:02:40 +00:00
karajorma	f4521da771	Sync with trunk	2009-05-21 13:50:06 +00:00
karajorma	6ba0f3622a	Fix Mantis 1926 (Piranha submunitions home in on the ship that fired them in dogfight mode)	2009-05-18 21:41:20 +00:00
karajorma	e3765e24e1	Sync with trunk	2009-05-17 12:08:06 +00:00
karajorma	7171bf1005	Sync with trunk	2009-05-16 12:36:06 +00:00
karajorma	b85ee3217d	A couple of minor corrections.	2009-05-15 20:31:01 +00:00
karajorma	12f137c645	Version Bump	2009-05-10 09:54:14 +00:00
karajorma	f0eb798f7e	Add the High Praise and Primaries Low builtin message types	2009-05-09 18:37:18 +00:00
karajorma	5c60351288	Sync with Trunk	2009-05-09 17:40:14 +00:00
karajorma	5895aca2c5	Warning level bump	2009-05-09 09:34:05 +00:00
karajorma	cfd2469f8b	Fix some minor warnings	2009-05-09 09:30:34 +00:00
karajorma	0094a5dba4	Sync with trunk	2009-05-08 17:19:10 +00:00
karajorma	94e84fc9b8	Switch a couple of Asserts to Assertions.	2009-05-08 17:18:46 +00:00
karajorma	35ad2c5cdc	Add support for multiple builtins of the same type.	2009-05-08 17:17:40 +00:00
karajorma	af7e0a700b	Add support for new builtin message types	2009-05-08 17:08:01 +00:00
karajorma	8943449825	Switch network variables over to the SEXP packet except for when called from lua	2009-05-08 17:05:43 +00:00
karajorma	555488e0bb	Add the Assertion Macro as an alternative to Assert.	2009-05-05 10:09:15 +00:00
karajorma	c6cf9da861	Add the set-ambient-light SEXP	2009-05-05 10:07:00 +00:00
karajorma	f11e9253b2	Allow multi-docking in multiplayer.	2009-05-04 12:19:34 +00:00
karajorma	fac68e4838	Maybe fix a crash with voice recognition.	2009-05-01 17:01:29 +00:00
karajorma	17d8105c38	Fix an issue with calling up the options menu while waiting for popupdead to appear.	2009-05-01 09:54:26 +00:00
karajorma	a31eed376c	This one too.	2009-04-30 11:22:01 +00:00
karajorma	e8abd881d2	Forgot to commit that.	2009-04-30 10:43:57 +00:00
karajorma	136b5c936d	Add a ship and parse flag to lock all turrets initially. Fix the Lock Primary/Secondary checkboxes to work for multi-selection. Add a checkbox for lock afterburner.	2009-04-28 13:13:47 +00:00
karajorma	34855d000e	Break up the status SEXPs into sub-categories.	2009-04-26 22:13:03 +00:00
karajorma	b6eed01e41	Auto-expand branches after pasting, add-pasting or replacing SEXPs. I really don't know why someone didn't get rid of that petty annoyance years ago.	2009-04-26 21:56:59 +00:00
karajorma	9616fb4cd7	Fix an assertion that crops up when you have no selected message but click on delete message. Has the side effect of making the message editor much less annoying too.	2009-04-26 21:51:53 +00:00
karajorma	344d8ba217	Fix a bug where the order of SEXP arguments was reversed.	2009-04-25 18:21:28 +00:00
karajorma	7e5239aff0	An ounce of prevention with the multiplayer SEXP packet code.	2009-04-24 21:56:09 +00:00
karajorma	09d5225883	Fix Mantis 1371 (Can target target's target even if it is stealthed or hidden from sensors).	2009-04-24 21:54:12 +00:00
karajorma	7f3ba14cec	Fix Mantis 1538 (special hitpoints not updated properly on deletion)	2009-04-24 21:17:10 +00:00
karajorma	850414b358	Fix Mantis 1909 (Can't paste variables in FRED)	2009-04-24 19:58:29 +00:00
karajorma	f18fa672f2	Fix (part of) Mantis 1677 (cap-subsys-cargo-known-delay doesn't list the correct ships)	2009-04-24 16:43:09 +00:00
karajorma	fcb62348b9	Fix Mantis 1813 (Negative number constants could be added in FRED for SEXPs which expected OPF_POSITIVE, often resulting in crashes).	2009-04-24 15:54:44 +00:00
karajorma	fbbb31bc49	Previous fix makes this code unnecessary so it might as well be removed.	2009-04-24 13:08:29 +00:00
karajorma	4d0e574ba4	Fix Mantis 1911 (Add Data doesn't show the <argument> option)	2009-04-24 13:05:24 +00:00
karajorma	ce5b56fdf7	Don't need to set that flag.	2009-04-24 10:33:17 +00:00
karajorma	04de7f7498	Fix Mantis 1913 (Characters after # are visible in the wings and reinforcements comms menu)	2009-04-23 18:46:29 +00:00
karajorma	46b2165312	Sync with trunk	2009-04-23 18:43:02 +00:00
karajorma	4182951b19	Fix Mantis 1884 (Entering the name of an invalid operator in any dialog other than events editor would crash FRED) Fix a typo in disable-builtin-messages	2009-04-22 20:39:32 +00:00
karajorma	cbd6f247d9	Fix Mantis 1916 (Can't change the dockpoint a ship is initial docked to without undocking it)	2009-04-21 18:00:03 +00:00
karajorma	73facc313e	Fix Mantis 1907 (Error in the get-damage-caused description)	2009-04-21 08:18:02 +00:00
karajorma	d2e3094544	Add SEXPs to set weapon, shield and afterburner energy.	2009-04-15 19:34:12 +00:00
karajorma	61512d5b8f	First commit of the SEXP packet code.	2009-04-15 19:32:56 +00:00
karajorma	2b42038c09	Fix Mantis 1910 (Assist Percentage resets itself when ships are multi selected)	2009-04-09 14:36:48 +00:00
karajorma	ad8f6ccda3	Some minor changes to the way the game uses the scoring features I added earlier.	2009-04-08 15:56:22 +00:00
karajorma	a201c9b3f3	Move the repair penalty to an AI profile setting.	2009-04-05 16:55:08 +00:00
karajorma	7edde650a1	Add the validate-argument SEXP. Fix a minor initialisation error with the ship-tag SEXP.	2009-04-05 16:48:07 +00:00
karajorma	ae3b88f23b	Sync with trunk	2009-04-02 17:37:42 +00:00
karajorma	c86e58e5e8	Fix Mantis 1883 (spaces at the end of ship and wing names can cause errors)	2009-04-02 17:33:29 +00:00
karajorma	f441432d57	Fix a bug which was causing FRED to choke on the ; and " replacement fix.	2009-04-02 17:30:10 +00:00
karajorma	417982862e	Fix an issue with homing capship missiles not tracking correctly.	2009-04-01 11:17:48 +00:00
karajorma	158733df8f	Apparently even the null terminator needs to be coloured.	2009-03-31 18:38:13 +00:00
karajorma	4b75870857	Sync with trunk	2009-03-29 21:31:50 +00:00
karajorma	dbfe86f018	Allow wireframe for the targetbox to be set from hud_gauges.tbl.	2009-03-29 21:03:24 +00:00
karajorma	f7d95acec8	Fix Mantis 1753 (Using " or ; in briefings and messages causes them to either vanish or truncate the message) Fix a bug that prevented lcl_replace_stuff() working properly when a message had two or more replacements of the same type.	2009-03-29 17:56:32 +00:00
karajorma	506686cfb7	Fix Mantis 1859 (FRED crashes if an unknown ship type is detected in the loadout.)	2009-03-29 12:39:01 +00:00
karajorma	8415a591e1	Allow the boilerplate traitor debrief to be turned off even if the player did turn traitor.	2009-03-24 15:22:57 +00:00
karajorma	1f8644f059	Fix Mantis 1620 (Replace Number/String don't work in FRED)	2009-03-21 21:48:20 +00:00
karajorma	f32f947b62	Sync with trunk	2009-03-20 14:01:12 +00:00
karajorma	99ce717f7e	Allow beams on any player ship to count for kills. Not just fighters and bombers.	2009-03-20 13:49:14 +00:00
karajorma	28f32a2f6d	Fix the FictionViewer truncating anything with more than 70 lines.	2009-03-17 18:01:59 +00:00
karajorma	3d5d730306	Sync with trunk.	2009-03-05 22:19:24 +00:00
karajorma	96426de56f	Fix Mantis 1661 (Ships leaving via the fighter bay don't disappear on multiplayer clients).	2009-03-05 22:12:34 +00:00
karajorma	b14b5e3622	Fix multiplayer for Inferno builds.	2009-03-02 09:28:08 +00:00
karajorma	35cd6ea336	Various fixes needed to allow multiplayer to use over 255 weapons.	2009-02-27 20:04:44 +00:00
karajorma	3332870e9e	Bobboau's Skybox flags code (via Wanderer then me)	2009-02-27 11:53:20 +00:00
karajorma	944c4bb2f2	Add new sexps to determine the amount of afterburner and weapon energy remaining. Add a missing resource file.	2009-02-26 13:17:00 +00:00
karajorma	705faf4a78	Sync up project files with Trunk	2009-02-25 20:02:18 +00:00
karajorma	614eda3b08	Sync with Trunk	2009-02-25 19:56:10 +00:00
karajorma	593cf6a533	Sync with trunk	2009-02-14 23:38:11 +00:00
karajorma	17ddae5db4	Fix Mantis 1486 (Pressing F4 locks multiplayer). Since this fix breaks compatibility I'll save up a few similar breaks and commit them all to trunk at the same time.	2009-02-14 21:47:53 +00:00
karajorma	d1b1eb65b6	Add Wanderer's Salvo Mode. Sync the 2008 project files up with Trunk.	2009-01-27 20:25:00 +00:00
karajorma	43ee74a2e0	Patch in Wanderer's subsystem flag	2009-01-13 17:43:09 +00:00
karajorma	20d33ac699	Sync with trunk	2009-01-09 18:29:01 +00:00
karajorma	1609e9211f	Sync with Trunk	2008-12-15 19:08:07 +00:00
karajorma	c8c05e9d0b	Add support for cutscenes before the various briefing and debriefing sections (FRED support for this feature will come later.)	2008-12-15 18:43:43 +00:00
karajorma	35130122e4	Sync up with trunk	2008-12-14 18:44:06 +00:00
karajorma	c1b549867a	Sync with Trunk.	2008-11-17 18:27:02 +00:00
karajorma	efea823ef1	Fix a bug where the log displays incorrect percentages for kills.	2008-11-17 15:12:41 +00:00
karajorma	91e375693c	Sync with Trunk.	2008-10-15 19:28:40 +00:00
karajorma	022aa38ad1	KeldorKatarn's afterburner lock SEXPs	2008-09-12 21:54:57 +00:00
karajorma	40419fb891	Allow players to filter who they send messages to when using the chatbox	2008-09-10 17:36:09 +00:00
karajorma	25d4a3b439	Update branch to latest SVN	2008-09-10 15:10:32 +00:00
karajorma	968e8d3d66	Sync with trunk	2008-08-20 20:58:15 +00:00
karajorma	6610938b80	Sync with trunk	2008-08-04 19:18:47 +00:00
karajorma	4b2691f572	Might as well update the project files too	2008-07-25 17:43:21 +00:00
karajorma	0ac2532fe5	Metge branch with trunk	2008-07-25 17:40:17 +00:00
karajorma	e42892cb90	Change the project file to add the new alt classes file.	2008-06-17 19:39:02 +00:00
karajorma	0d14a559eb	FRED changes for team loadout.	2008-06-17 19:36:16 +00:00
karajorma	2a65fcb388	Commit the actual team loadout code.	2008-06-17 19:20:34 +00:00
karajorma	a02b9d953a	Get-Damage-Caused SEXP and a couple of functions for counting the number of variables of a certain type.	2008-06-17 19:17:55 +00:00
karajorma	53f8c36587	Changes to allow more data to be used from exited_ship. Make ship_exited dynamic too.	2008-06-17 19:10:28 +00:00
karajorma	8323f5b4ad	A couple of new parsing functions for dealing with variables in fields that previously only accepted integers or strings.	2008-06-17 18:49:11 +00:00
Goober5000	6ef349a6d4	made a copy	2008-06-17 02:52:56 +00:00