xemu/cpu-exec.c

650 lines
20 KiB
C
Raw Normal View History

/*
* emulator main execution loop
*
* Copyright (c) 2003-2005 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "trace.h"
#include "disas/disas.h"
#include "exec/exec-all.h"
#include "tcg.h"
#include "qemu/atomic.h"
#include "sysemu/qtest.h"
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
#include "qemu/timer.h"
#include "exec/address-spaces.h"
#include "qemu/rcu.h"
#include "exec/tb-hash.h"
#include "exec/log.h"
#if defined(TARGET_I386) && !defined(CONFIG_USER_ONLY)
#include "hw/i386/apic.h"
#endif
#include "sysemu/replay.h"
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
/* -icount align implementation. */
typedef struct SyncClocks {
int64_t diff_clk;
int64_t last_cpu_icount;
int64_t realtime_clock;
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
} SyncClocks;
#if !defined(CONFIG_USER_ONLY)
/* Allow the guest to have a max 3ms advance.
* The difference between the 2 clocks could therefore
* oscillate around 0.
*/
#define VM_CLOCK_ADVANCE 3000000
#define THRESHOLD_REDUCE 1.5
#define MAX_DELAY_PRINT_RATE 2000000000LL
#define MAX_NB_PRINTS 100
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
static void align_clocks(SyncClocks *sc, const CPUState *cpu)
{
int64_t cpu_icount;
if (!icount_align_option) {
return;
}
cpu_icount = cpu->icount_extra + cpu->icount_decr.u16.low;
sc->diff_clk += cpu_icount_to_ns(sc->last_cpu_icount - cpu_icount);
sc->last_cpu_icount = cpu_icount;
if (sc->diff_clk > VM_CLOCK_ADVANCE) {
#ifndef _WIN32
struct timespec sleep_delay, rem_delay;
sleep_delay.tv_sec = sc->diff_clk / 1000000000LL;
sleep_delay.tv_nsec = sc->diff_clk % 1000000000LL;
if (nanosleep(&sleep_delay, &rem_delay) < 0) {
sc->diff_clk = rem_delay.tv_sec * 1000000000LL + rem_delay.tv_nsec;
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
} else {
sc->diff_clk = 0;
}
#else
Sleep(sc->diff_clk / SCALE_MS);
sc->diff_clk = 0;
#endif
}
}
static void print_delay(const SyncClocks *sc)
{
static float threshold_delay;
static int64_t last_realtime_clock;
static int nb_prints;
if (icount_align_option &&
sc->realtime_clock - last_realtime_clock >= MAX_DELAY_PRINT_RATE &&
nb_prints < MAX_NB_PRINTS) {
if ((-sc->diff_clk / (float)1000000000LL > threshold_delay) ||
(-sc->diff_clk / (float)1000000000LL <
(threshold_delay - THRESHOLD_REDUCE))) {
threshold_delay = (-sc->diff_clk / 1000000000LL) + 1;
printf("Warning: The guest is now late by %.1f to %.1f seconds\n",
threshold_delay - 1,
threshold_delay);
nb_prints++;
last_realtime_clock = sc->realtime_clock;
}
}
}
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
static void init_delay_params(SyncClocks *sc,
const CPUState *cpu)
{
if (!icount_align_option) {
return;
}
sc->realtime_clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL_RT);
sc->diff_clk = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - sc->realtime_clock;
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
sc->last_cpu_icount = cpu->icount_extra + cpu->icount_decr.u16.low;
if (sc->diff_clk < max_delay) {
max_delay = sc->diff_clk;
}
if (sc->diff_clk > max_advance) {
max_advance = sc->diff_clk;
}
/* Print every 2s max if the guest is late. We limit the number
of printed messages to NB_PRINT_MAX(currently 100) */
print_delay(sc);
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
}
#else
static void align_clocks(SyncClocks *sc, const CPUState *cpu)
{
}
static void init_delay_params(SyncClocks *sc, const CPUState *cpu)
{
}
#endif /* CONFIG USER ONLY */
/* Execute a TB, and fix up the CPU state afterwards if necessary */
static inline tcg_target_ulong cpu_tb_exec(CPUState *cpu, TranslationBlock *itb)
{
CPUArchState *env = cpu->env_ptr;
uintptr_t ret;
TranslationBlock *last_tb;
int tb_exit;
uint8_t *tb_ptr = itb->tc_ptr;
qemu_log_mask_and_addr(CPU_LOG_EXEC, itb->pc,
"Trace %p [" TARGET_FMT_lx "] %s\n",
itb->tc_ptr, itb->pc, lookup_symbol(itb->pc));
#if defined(DEBUG_DISAS)
if (qemu_loglevel_mask(CPU_LOG_TB_CPU)) {
#if defined(TARGET_I386)
log_cpu_state(cpu, CPU_DUMP_CCOP);
#elif defined(TARGET_M68K)
/* ??? Should not modify env state for dumping. */
cpu_m68k_flush_flags(env, env->cc_op);
env->cc_op = CC_OP_FLAGS;
env->sr = (env->sr & 0xffe0) | env->cc_dest | (env->cc_x << 4);
log_cpu_state(cpu, 0);
#else
log_cpu_state(cpu, 0);
#endif
}
#endif /* DEBUG_DISAS */
cpu->can_do_io = !use_icount;
ret = tcg_qemu_tb_exec(env, tb_ptr);
cpu->can_do_io = 1;
last_tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
tb_exit = ret & TB_EXIT_MASK;
trace_exec_tb_exit(last_tb, tb_exit);
if (tb_exit > TB_EXIT_IDX1) {
/* We didn't start executing this TB (eg because the instruction
* counter hit zero); we must restore the guest PC to the address
* of the start of the TB.
*/
CPUClass *cc = CPU_GET_CLASS(cpu);
qemu_log_mask_and_addr(CPU_LOG_EXEC, last_tb->pc,
"Stopped execution of TB chain before %p ["
TARGET_FMT_lx "] %s\n",
last_tb->tc_ptr, last_tb->pc,
lookup_symbol(last_tb->pc));
if (cc->synchronize_from_tb) {
cc->synchronize_from_tb(cpu, last_tb);
} else {
assert(cc->set_pc);
cc->set_pc(cpu, last_tb->pc);
}
}
if (tb_exit == TB_EXIT_REQUESTED) {
/* We were asked to stop executing TBs (probably a pending
* interrupt. We've now stopped, so clear the flag.
*/
cpu->tcg_exit_req = 0;
}
return ret;
}
#ifndef CONFIG_USER_ONLY
/* Execute the code without caching the generated code. An interpreter
could be used if available. */
static void cpu_exec_nocache(CPUState *cpu, int max_cycles,
TranslationBlock *orig_tb, bool ignore_icount)
{
TranslationBlock *tb;
tcg: Rework tb_invalidated_flag 'tb_invalidated_flag' was meant to catch two events: * some TB has been invalidated by tb_phys_invalidate(); * the whole translation buffer has been flushed by tb_flush(). Then it was checked: * in cpu_exec() to ensure that the last executed TB can be safely linked to directly call the next one; * in cpu_exec_nocache() to decide if the original TB should be provided for further possible invalidation along with the temporarily generated TB. It is always safe to patch an invalidated TB since it is not going to be used anyway. It is also safe to call tb_phys_invalidate() for an already invalidated TB. Thus, setting this flag in tb_phys_invalidate() is simply unnecessary. Moreover, it can prevent from pretty proper linking of TBs, if any arbitrary TB has been invalidated. So just don't touch it in tb_phys_invalidate(). If this flag is only used to catch whether tb_flush() has been called then rename it to 'tb_flushed'. Declare it as 'bool' and stick to using only 'true' and 'false' to set its value. Also, instead of setting it in tb_gen_code(), just after tb_flush() has been called, do it right inside of tb_flush(). In cpu_exec(), this flag is used to track if tb_flush() has been called and have made 'next_tb' (a reference to the last executed TB) invalid for linking it to directly call the next TB. tb_flush() can be called during the CPU execution loop from tb_gen_code(), during TB execution or by another thread while 'tb_lock' is released. Catch for translation buffer flush reliably by resetting this flag once before first TB lookup and each time we find it set before trying to add a direct jump. Don't touch in in tb_find_physical(). Each vCPU has its own execution loop in multithreaded mode and thus should have its own copy of the flag to be able to reset it with its own 'next_tb' and don't affect any other vCPU execution thread. So make this flag per-vCPU and move it to CPUState. In cpu_exec_nocache(), we only need to check if tb_flush() has been called from tb_gen_code() called by cpu_exec_nocache() itself. To do this reliably, preserve the old value of the flag, reset it before calling tb_gen_code(), check afterwards, and combine the saved value back to the flag. This patch is based on the patch "tcg: move tb_invalidated_flag to CPUState" from Paolo Bonzini <pbonzini@redhat.com>. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-04-13 19:40:18 +00:00
bool old_tb_flushed;
/* Should never happen.
We only end up here when an existing TB is too long. */
if (max_cycles > CF_COUNT_MASK)
max_cycles = CF_COUNT_MASK;
tcg: Rework tb_invalidated_flag 'tb_invalidated_flag' was meant to catch two events: * some TB has been invalidated by tb_phys_invalidate(); * the whole translation buffer has been flushed by tb_flush(). Then it was checked: * in cpu_exec() to ensure that the last executed TB can be safely linked to directly call the next one; * in cpu_exec_nocache() to decide if the original TB should be provided for further possible invalidation along with the temporarily generated TB. It is always safe to patch an invalidated TB since it is not going to be used anyway. It is also safe to call tb_phys_invalidate() for an already invalidated TB. Thus, setting this flag in tb_phys_invalidate() is simply unnecessary. Moreover, it can prevent from pretty proper linking of TBs, if any arbitrary TB has been invalidated. So just don't touch it in tb_phys_invalidate(). If this flag is only used to catch whether tb_flush() has been called then rename it to 'tb_flushed'. Declare it as 'bool' and stick to using only 'true' and 'false' to set its value. Also, instead of setting it in tb_gen_code(), just after tb_flush() has been called, do it right inside of tb_flush(). In cpu_exec(), this flag is used to track if tb_flush() has been called and have made 'next_tb' (a reference to the last executed TB) invalid for linking it to directly call the next TB. tb_flush() can be called during the CPU execution loop from tb_gen_code(), during TB execution or by another thread while 'tb_lock' is released. Catch for translation buffer flush reliably by resetting this flag once before first TB lookup and each time we find it set before trying to add a direct jump. Don't touch in in tb_find_physical(). Each vCPU has its own execution loop in multithreaded mode and thus should have its own copy of the flag to be able to reset it with its own 'next_tb' and don't affect any other vCPU execution thread. So make this flag per-vCPU and move it to CPUState. In cpu_exec_nocache(), we only need to check if tb_flush() has been called from tb_gen_code() called by cpu_exec_nocache() itself. To do this reliably, preserve the old value of the flag, reset it before calling tb_gen_code(), check afterwards, and combine the saved value back to the flag. This patch is based on the patch "tcg: move tb_invalidated_flag to CPUState" from Paolo Bonzini <pbonzini@redhat.com>. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-04-13 19:40:18 +00:00
old_tb_flushed = cpu->tb_flushed;
cpu->tb_flushed = false;
tb = tb_gen_code(cpu, orig_tb->pc, orig_tb->cs_base, orig_tb->flags,
max_cycles | CF_NOCACHE
| (ignore_icount ? CF_IGNORE_ICOUNT : 0));
tcg: Rework tb_invalidated_flag 'tb_invalidated_flag' was meant to catch two events: * some TB has been invalidated by tb_phys_invalidate(); * the whole translation buffer has been flushed by tb_flush(). Then it was checked: * in cpu_exec() to ensure that the last executed TB can be safely linked to directly call the next one; * in cpu_exec_nocache() to decide if the original TB should be provided for further possible invalidation along with the temporarily generated TB. It is always safe to patch an invalidated TB since it is not going to be used anyway. It is also safe to call tb_phys_invalidate() for an already invalidated TB. Thus, setting this flag in tb_phys_invalidate() is simply unnecessary. Moreover, it can prevent from pretty proper linking of TBs, if any arbitrary TB has been invalidated. So just don't touch it in tb_phys_invalidate(). If this flag is only used to catch whether tb_flush() has been called then rename it to 'tb_flushed'. Declare it as 'bool' and stick to using only 'true' and 'false' to set its value. Also, instead of setting it in tb_gen_code(), just after tb_flush() has been called, do it right inside of tb_flush(). In cpu_exec(), this flag is used to track if tb_flush() has been called and have made 'next_tb' (a reference to the last executed TB) invalid for linking it to directly call the next TB. tb_flush() can be called during the CPU execution loop from tb_gen_code(), during TB execution or by another thread while 'tb_lock' is released. Catch for translation buffer flush reliably by resetting this flag once before first TB lookup and each time we find it set before trying to add a direct jump. Don't touch in in tb_find_physical(). Each vCPU has its own execution loop in multithreaded mode and thus should have its own copy of the flag to be able to reset it with its own 'next_tb' and don't affect any other vCPU execution thread. So make this flag per-vCPU and move it to CPUState. In cpu_exec_nocache(), we only need to check if tb_flush() has been called from tb_gen_code() called by cpu_exec_nocache() itself. To do this reliably, preserve the old value of the flag, reset it before calling tb_gen_code(), check afterwards, and combine the saved value back to the flag. This patch is based on the patch "tcg: move tb_invalidated_flag to CPUState" from Paolo Bonzini <pbonzini@redhat.com>. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-04-13 19:40:18 +00:00
tb->orig_tb = cpu->tb_flushed ? NULL : orig_tb;
cpu->tb_flushed |= old_tb_flushed;
/* execute the generated code */
trace_exec_tb_nocache(tb, tb->pc);
cpu_tb_exec(cpu, tb);
tb_phys_invalidate(tb, -1);
tb_free(tb);
}
#endif
static TranslationBlock *tb_find_physical(CPUState *cpu,
target_ulong pc,
target_ulong cs_base,
uint32_t flags)
{
CPUArchState *env = (CPUArchState *)cpu->env_ptr;
TranslationBlock *tb, **tb_hash_head, **ptb1;
unsigned int h;
tb_page_addr_t phys_pc, phys_page1;
/* find translated block using physical mappings */
phys_pc = get_page_addr_code(env, pc);
phys_page1 = phys_pc & TARGET_PAGE_MASK;
h = tb_phys_hash_func(phys_pc);
/* Start at head of the hash entry */
ptb1 = tb_hash_head = &tcg_ctx.tb_ctx.tb_phys_hash[h];
tb = *ptb1;
while (tb) {
if (tb->pc == pc &&
tb->page_addr[0] == phys_page1 &&
tb->cs_base == cs_base &&
tb->flags == flags) {
if (tb->page_addr[1] == -1) {
/* done, we have a match */
break;
} else {
/* check next page if needed */
target_ulong virt_page2 = (pc & TARGET_PAGE_MASK) +
TARGET_PAGE_SIZE;
tb_page_addr_t phys_page2 = get_page_addr_code(env, virt_page2);
if (tb->page_addr[1] == phys_page2) {
break;
}
}
}
ptb1 = &tb->phys_hash_next;
tb = *ptb1;
}
if (tb) {
/* Move the TB to the head of the list */
*ptb1 = tb->phys_hash_next;
tb->phys_hash_next = *tb_hash_head;
*tb_hash_head = tb;
}
return tb;
}
static TranslationBlock *tb_find_slow(CPUState *cpu,
target_ulong pc,
target_ulong cs_base,
uint32_t flags)
{
TranslationBlock *tb;
tb = tb_find_physical(cpu, pc, cs_base, flags);
if (tb) {
goto found;
}
#ifdef CONFIG_USER_ONLY
/* mmap_lock is needed by tb_gen_code, and mmap_lock must be
* taken outside tb_lock. Since we're momentarily dropping
* tb_lock, there's a chance that our desired tb has been
* translated.
*/
tb_unlock();
mmap_lock();
tb_lock();
tb = tb_find_physical(cpu, pc, cs_base, flags);
if (tb) {
mmap_unlock();
goto found;
}
#endif
/* if no translated code available, then translate it now */
tb = tb_gen_code(cpu, pc, cs_base, flags, 0);
#ifdef CONFIG_USER_ONLY
mmap_unlock();
#endif
found:
/* we add the TB in the virtual pc hash table */
cpu->tb_jmp_cache[tb_jmp_cache_hash_func(pc)] = tb;
return tb;
}
static inline TranslationBlock *tb_find_fast(CPUState *cpu,
TranslationBlock **last_tb,
int tb_exit)
{
CPUArchState *env = (CPUArchState *)cpu->env_ptr;
TranslationBlock *tb;
target_ulong cs_base, pc;
uint32_t flags;
/* we record a subset of the CPU state. It will
always be the same before a given translated block
is executed. */
cpu_get_tb_cpu_state(env, &pc, &cs_base, &flags);
tb_lock();
tb = cpu->tb_jmp_cache[tb_jmp_cache_hash_func(pc)];
if (unlikely(!tb || tb->pc != pc || tb->cs_base != cs_base ||
tb->flags != flags)) {
tb = tb_find_slow(cpu, pc, cs_base, flags);
}
if (cpu->tb_flushed) {
/* Ensure that no TB jump will be modified as the
* translation buffer has been flushed.
*/
*last_tb = NULL;
cpu->tb_flushed = false;
}
/* See if we can patch the calling TB. */
if (*last_tb && !qemu_loglevel_mask(CPU_LOG_TB_NOCHAIN)) {
tb_add_jump(*last_tb, tb_exit, tb);
}
tb_unlock();
return tb;
}
static inline bool cpu_handle_halt(CPUState *cpu)
{
if (cpu->halted) {
#if defined(TARGET_I386) && !defined(CONFIG_USER_ONLY)
if ((cpu->interrupt_request & CPU_INTERRUPT_POLL)
&& replay_interrupt()) {
X86CPU *x86_cpu = X86_CPU(cpu);
apic_poll_irq(x86_cpu->apic_state);
cpu_reset_interrupt(cpu, CPU_INTERRUPT_POLL);
}
#endif
if (!cpu_has_work(cpu)) {
current_cpu = NULL;
return true;
}
cpu->halted = 0;
}
return false;
}
static inline void cpu_handle_debug_exception(CPUState *cpu)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
CPUWatchpoint *wp;
if (!cpu->watchpoint_hit) {
QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
wp->flags &= ~BP_WATCHPOINT_HIT;
}
}
cc->debug_excp_handler(cpu);
}
static inline bool cpu_handle_exception(CPUState *cpu, int *ret)
{
if (cpu->exception_index >= 0) {
if (cpu->exception_index >= EXCP_INTERRUPT) {
/* exit request from the cpu execution loop */
*ret = cpu->exception_index;
if (*ret == EXCP_DEBUG) {
cpu_handle_debug_exception(cpu);
}
cpu->exception_index = -1;
return true;
} else {
#if defined(CONFIG_USER_ONLY)
/* if user mode only, we simulate a fake exception
which will be handled outside the cpu execution
loop */
#if defined(TARGET_I386)
CPUClass *cc = CPU_GET_CLASS(cpu);
cc->do_interrupt(cpu);
#endif
*ret = cpu->exception_index;
cpu->exception_index = -1;
return true;
#else
if (replay_exception()) {
CPUClass *cc = CPU_GET_CLASS(cpu);
cc->do_interrupt(cpu);
cpu->exception_index = -1;
} else if (!replay_has_interrupt()) {
/* give a chance to iothread in replay mode */
*ret = EXCP_INTERRUPT;
return true;
}
#endif
}
#ifndef CONFIG_USER_ONLY
} else if (replay_has_exception()
&& cpu->icount_decr.u16.low + cpu->icount_extra == 0) {
/* try to cause an exception pending in the log */
TranslationBlock *last_tb = NULL; /* Avoid chaining TBs */
cpu_exec_nocache(cpu, 1, tb_find_fast(cpu, &last_tb, 0), true);
*ret = -1;
return true;
#endif
}
return false;
}
static inline void cpu_handle_interrupt(CPUState *cpu,
TranslationBlock **last_tb)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
int interrupt_request = cpu->interrupt_request;
if (unlikely(interrupt_request)) {
if (unlikely(cpu->singlestep_enabled & SSTEP_NOIRQ)) {
/* Mask out external interrupts for this step. */
interrupt_request &= ~CPU_INTERRUPT_SSTEP_MASK;
}
if (interrupt_request & CPU_INTERRUPT_DEBUG) {
cpu->interrupt_request &= ~CPU_INTERRUPT_DEBUG;
cpu->exception_index = EXCP_DEBUG;
cpu_loop_exit(cpu);
}
if (replay_mode == REPLAY_MODE_PLAY && !replay_has_interrupt()) {
/* Do nothing */
} else if (interrupt_request & CPU_INTERRUPT_HALT) {
replay_interrupt();
cpu->interrupt_request &= ~CPU_INTERRUPT_HALT;
cpu->halted = 1;
cpu->exception_index = EXCP_HLT;
cpu_loop_exit(cpu);
}
#if defined(TARGET_I386)
else if (interrupt_request & CPU_INTERRUPT_INIT) {
X86CPU *x86_cpu = X86_CPU(cpu);
CPUArchState *env = &x86_cpu->env;
replay_interrupt();
cpu_svm_check_intercept_param(env, SVM_EXIT_INIT, 0);
do_cpu_init(x86_cpu);
cpu->exception_index = EXCP_HALTED;
cpu_loop_exit(cpu);
}
#else
else if (interrupt_request & CPU_INTERRUPT_RESET) {
replay_interrupt();
cpu_reset(cpu);
cpu_loop_exit(cpu);
}
#endif
/* The target hook has 3 exit conditions:
False when the interrupt isn't processed,
True when it is, and we should restart on a new TB,
and via longjmp via cpu_loop_exit. */
else {
replay_interrupt();
if (cc->cpu_exec_interrupt(cpu, interrupt_request)) {
*last_tb = NULL;
}
/* The target hook may have updated the 'cpu->interrupt_request';
* reload the 'interrupt_request' value */
interrupt_request = cpu->interrupt_request;
}
if (interrupt_request & CPU_INTERRUPT_EXITTB) {
cpu->interrupt_request &= ~CPU_INTERRUPT_EXITTB;
/* ensure that no TB jump will be modified as
the program flow was changed */
*last_tb = NULL;
}
}
if (unlikely(cpu->exit_request || replay_has_interrupt())) {
cpu->exit_request = 0;
cpu->exception_index = EXCP_INTERRUPT;
cpu_loop_exit(cpu);
}
}
static inline void cpu_loop_exec_tb(CPUState *cpu, TranslationBlock *tb,
TranslationBlock **last_tb, int *tb_exit,
SyncClocks *sc)
{
uintptr_t ret;
if (unlikely(cpu->exit_request)) {
return;
}
trace_exec_tb(tb, tb->pc);
ret = cpu_tb_exec(cpu, tb);
*last_tb = (TranslationBlock *)(ret & ~TB_EXIT_MASK);
*tb_exit = ret & TB_EXIT_MASK;
switch (*tb_exit) {
case TB_EXIT_REQUESTED:
/* Something asked us to stop executing
* chained TBs; just continue round the main
* loop. Whatever requested the exit will also
* have set something else (eg exit_request or
* interrupt_request) which we will handle
* next time around the loop. But we need to
* ensure the tcg_exit_req read in generated code
* comes before the next read of cpu->exit_request
* or cpu->interrupt_request.
*/
smp_rmb();
*last_tb = NULL;
break;
case TB_EXIT_ICOUNT_EXPIRED:
{
/* Instruction counter expired. */
#ifdef CONFIG_USER_ONLY
abort();
#else
int insns_left = cpu->icount_decr.u32;
if (cpu->icount_extra && insns_left >= 0) {
/* Refill decrementer and continue execution. */
cpu->icount_extra += insns_left;
insns_left = MIN(0xffff, cpu->icount_extra);
cpu->icount_extra -= insns_left;
cpu->icount_decr.u16.low = insns_left;
} else {
if (insns_left > 0) {
/* Execute remaining instructions. */
cpu_exec_nocache(cpu, insns_left, *last_tb, false);
align_clocks(sc, cpu);
}
cpu->exception_index = EXCP_INTERRUPT;
*last_tb = NULL;
cpu_loop_exit(cpu);
}
break;
#endif
}
default:
break;
}
}
/* main execution loop */
int cpu_exec(CPUState *cpu)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
int ret;
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
SyncClocks sc;
/* replay_interrupt may need current_cpu */
current_cpu = cpu;
if (cpu_handle_halt(cpu)) {
return EXCP_HALTED;
}
atomic_mb_set(&tcg_current_cpu, cpu);
rcu_read_lock();
if (unlikely(atomic_mb_read(&exit_request))) {
cpu->exit_request = 1;
}
cc->cpu_exec_enter(cpu);
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
/* Calculate difference between guest clock and host clock.
* This delay includes the delay of the last cycle, so
* what we have to do is sleep until it is 0. As for the
* advance/delay we gain here, we try to fix it next time.
*/
init_delay_params(&sc, cpu);
for(;;) {
TranslationBlock *tb, *last_tb;
int tb_exit = 0;
/* prepare setjmp context for exception handling */
if (sigsetjmp(cpu->jmp_env, 0) == 0) {
/* if an exception is pending, we execute it here */
if (cpu_handle_exception(cpu, &ret)) {
break;
}
last_tb = NULL; /* forget the last executed TB after exception */
tcg: Rework tb_invalidated_flag 'tb_invalidated_flag' was meant to catch two events: * some TB has been invalidated by tb_phys_invalidate(); * the whole translation buffer has been flushed by tb_flush(). Then it was checked: * in cpu_exec() to ensure that the last executed TB can be safely linked to directly call the next one; * in cpu_exec_nocache() to decide if the original TB should be provided for further possible invalidation along with the temporarily generated TB. It is always safe to patch an invalidated TB since it is not going to be used anyway. It is also safe to call tb_phys_invalidate() for an already invalidated TB. Thus, setting this flag in tb_phys_invalidate() is simply unnecessary. Moreover, it can prevent from pretty proper linking of TBs, if any arbitrary TB has been invalidated. So just don't touch it in tb_phys_invalidate(). If this flag is only used to catch whether tb_flush() has been called then rename it to 'tb_flushed'. Declare it as 'bool' and stick to using only 'true' and 'false' to set its value. Also, instead of setting it in tb_gen_code(), just after tb_flush() has been called, do it right inside of tb_flush(). In cpu_exec(), this flag is used to track if tb_flush() has been called and have made 'next_tb' (a reference to the last executed TB) invalid for linking it to directly call the next TB. tb_flush() can be called during the CPU execution loop from tb_gen_code(), during TB execution or by another thread while 'tb_lock' is released. Catch for translation buffer flush reliably by resetting this flag once before first TB lookup and each time we find it set before trying to add a direct jump. Don't touch in in tb_find_physical(). Each vCPU has its own execution loop in multithreaded mode and thus should have its own copy of the flag to be able to reset it with its own 'next_tb' and don't affect any other vCPU execution thread. So make this flag per-vCPU and move it to CPUState. In cpu_exec_nocache(), we only need to check if tb_flush() has been called from tb_gen_code() called by cpu_exec_nocache() itself. To do this reliably, preserve the old value of the flag, reset it before calling tb_gen_code(), check afterwards, and combine the saved value back to the flag. This patch is based on the patch "tcg: move tb_invalidated_flag to CPUState" from Paolo Bonzini <pbonzini@redhat.com>. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-04-13 19:40:18 +00:00
cpu->tb_flushed = false; /* reset before first TB lookup */
for(;;) {
cpu_handle_interrupt(cpu, &last_tb);
tb = tb_find_fast(cpu, &last_tb, tb_exit);
cpu_loop_exec_tb(cpu, tb, &last_tb, &tb_exit, &sc);
cpu-exec: Add sleeping algorithm The goal is to sleep qemu whenever the guest clock is in advance compared to the host clock (we use the monotonic clocks). The amount of time to sleep is calculated in the execution loop in cpu_exec. At first, we tried to approximate at each for loop the real time elapsed while searching for a TB (generating or retrieving from cache) and executing it. We would then approximate the virtual time corresponding to the number of virtual instructions executed. The difference between these 2 values would allow us to know if the guest is in advance or delayed. However, the function used for measuring the real time (qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive. We had an added overhead of 13% of the total run time. Therefore, we modified the algorithm and only take into account the difference between the 2 clocks at the begining of the cpu_exec function. During the for loop we try to reduce the advance of the guest only by computing the virtual time elapsed and sleeping if necessary. The overhead is thus reduced to 3%. Even though this method still has a noticeable overhead, it no longer is a bottleneck in trying to achieve a better guest frequency for which the guest clock is faster than the host one. As for the the alignement of the 2 clocks, with the first algorithm the guest clock was oscillating between -1 and 1ms compared to the host clock. Using the second algorithm we notice that the guest is 5ms behind the host, which is still acceptable for our use case. The tests where conducted using fio and stress. The host machine in an i5 CPU at 3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb built with buildroot. Currently, on our test machine, the lowest icount we can achieve that is suitable for aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are slower than the cpu tests (using stress). Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr> Tested-by: Camille Bégué <camille.begue@openwide.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-25 09:56:31 +00:00
/* Try to align the host and virtual clocks
if the guest is in advance */
align_clocks(&sc, cpu);
} /* for(;;) */
} else {
#if defined(__clang__) || !QEMU_GNUC_PREREQ(4, 6)
/* Some compilers wrongly smash all local variables after
* siglongjmp. There were bug reports for gcc 4.5.0 and clang.
* Reload essential local variables here for those compilers.
* Newer versions of gcc would complain about this code (-Wclobbered). */
cpu = current_cpu;
cc = CPU_GET_CLASS(cpu);
#else /* buggy compiler */
/* Assert that the compiler does not smash local variables. */
g_assert(cpu == current_cpu);
g_assert(cc == CPU_GET_CLASS(cpu));
#endif /* buggy compiler */
cpu->can_do_io = 1;
tb_lock_reset();
}
} /* for(;;) */
cc->cpu_exec_exit(cpu);
rcu_read_unlock();
/* fail safe : never use current_cpu outside cpu_exec() */
current_cpu = NULL;
/* Does not need atomic_mb_set because a spurious wakeup is okay. */
atomic_set(&tcg_current_cpu, NULL);
return ret;
}