xemu/hw/net/can/can_sja1000.h

/*
 * CAN device - SJA1000 chip emulation for QEMU
 *
 * Copyright (c) 2013-2014 Jin Yang
 * Copyright (c) 2014-2018 Pavel Pisa
 *
 * Initial development supported by Google GSoC 2013 from RTEMS project slot
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#ifndef HW_CAN_SJA1000_H
#define HW_CAN_SJA1000_H

#include "net/can_emu.h"

#define CAN_SJA_MEM_SIZE      128

/* The max size for a message buffer, EFF and DLC=8, DS-p39 */
#define SJA_MSG_MAX_LEN       13
/* The receive buffer size. */
#define SJA_RCV_BUF_LEN       64

typedef struct CanSJA1000State {
    /* PeliCAN state and registers sorted by address */
    uint8_t         mode;          /* 0  .. Mode register, DS-p26 */
                                   /* 1  .. Command register */
    uint8_t         status_pel;    /* 2  .. Status register, p15 */
    uint8_t         interrupt_pel; /* 3  .. Interrupt register */
    uint8_t         interrupt_en;  /* 4  .. Interrupt Enable register */
    uint8_t         rxmsg_cnt;     /* 29 .. RX message counter. DS-p49 */
    uint8_t         rxbuf_start;   /* 30 .. RX buffer start address, DS-p49 */
    uint8_t         clock;         /* 31 .. Clock Divider register, DS-p55 */

    uint8_t         code_mask[8];  /* 16~23 */
    uint8_t         tx_buff[13];   /* 96~108 .. transmit buffer */
                                   /* 10~19  .. transmit buffer for BasicCAN */

    uint8_t         rx_buff[SJA_RCV_BUF_LEN];  /* 32~95 .. 64bytes Rx FIFO */
    uint32_t        rx_ptr;        /* Count by bytes. */
    uint32_t        rx_cnt;        /* Count by bytes. */

    /* PeliCAN state and registers sorted by address */
    uint8_t         control;       /* 0 .. Control register */
                                   /* 1 .. Command register */
    uint8_t         status_bas;    /* 2 .. Status register */
    uint8_t         interrupt_bas; /* 3 .. Interrupt register */
    uint8_t         code;          /* 4 .. Acceptance code register */
    uint8_t         mask;          /* 5 .. Acceptance mask register */

    qemu_can_filter filter[4];

    qemu_irq          irq;
    CanBusClientState bus_client;
} CanSJA1000State;

/* PeliCAN mode */
enum SJA1000_PeliCAN_regs {
        SJA_MOD      = 0x00,    /* Mode control register */
        SJA_CMR      = 0x01,    /* Command register */
        SJA_SR       = 0x02,    /* Status register */
        SJA_IR       = 0x03,    /* Interrupt register */
        SJA_IER      = 0x04,    /* Interrupt Enable */
        SJA_BTR0     = 0x06,    /* Bus Timing register 0 */
        SJA_BTR1     = 0x07,    /* Bus Timing register 1 */
        SJA_OCR      = 0x08,    /* Output Control register */
        SJA_ALC      = 0x0b,    /* Arbitration Lost Capture */
        SJA_ECC      = 0x0c,    /* Error Code Capture */
        SJA_EWLR     = 0x0d,    /* Error Warning Limit */
        SJA_RXERR    = 0x0e,    /* RX Error Counter */
        SJA_TXERR0   = 0x0e,    /* TX Error Counter */
        SJA_TXERR1   = 0x0f,
        SJA_RMC      = 0x1d,    /* Rx Message Counter
                                 * number of messages in RX FIFO
                                 */
        SJA_RBSA     = 0x1e,    /* Rx Buffer Start Addr
                                 * address of current message
                                 */
        SJA_FRM      = 0x10,    /* Transmit Buffer
                                 * write: Receive Buffer
                                 * read: Frame Information
                                 */
/*
 * ID bytes (11 bits in 0 and 1 for standard message or
 *          16 bits in 0,1 and 13 bits in 2,3 for extended message)
 *          The most significant bit of ID is placed in MSB
 *          position of ID0 register.
 */
        SJA_ID0      = 0x11,    /* ID for standard and extended frames */
        SJA_ID1      = 0x12,
        SJA_ID2      = 0x13,    /* ID cont. for extended frames */
        SJA_ID3      = 0x14,

        SJA_DATS     = 0x13,    /* Data start standard frame */
        SJA_DATE     = 0x15,    /* Data start extended frame */
        SJA_ACR0     = 0x10,    /* Acceptance Code (4 bytes) in RESET mode */
        SJA_AMR0     = 0x14,    /* Acceptance Mask (4 bytes) in RESET mode */
        SJA_PeliCAN_AC_LEN = 4, /* 4 bytes */
        SJA_CDR      = 0x1f     /* Clock Divider */
};


/* BasicCAN  mode */
enum SJA1000_BasicCAN_regs {
        SJA_BCAN_CTR = 0x00,    /* Control register */
        SJA_BCAN_CMR = 0x01,    /* Command register */
        SJA_BCAN_SR  = 0x02,    /* Status register */
        SJA_BCAN_IR  = 0x03     /* Interrupt register */
};

void can_sja_hardware_reset(CanSJA1000State *s);

void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val,
                       unsigned size);

uint64_t can_sja_mem_read(CanSJA1000State *s, hwaddr addr, unsigned size);

int can_sja_connect_to_bus(CanSJA1000State *s, CanBusState *bus);

void can_sja_disconnect(CanSJA1000State *s);

int can_sja_init(CanSJA1000State *s, qemu_irq irq);

int can_sja_can_receive(CanBusClientState *client);

ssize_t can_sja_receive(CanBusClientState *client,
                        const qemu_can_frame *frames, size_t frames_cnt);

extern const VMStateDescription vmstate_can_sja;

#endif