In ahci_exec() we attempt to permit the caller to pass a NULL pointer
for opts_in (in which case we use a default set of options). However
although we check for NULL when setting up the opts variable at the
top of the function, we unconditionally dereference opts_in at the
end of the function as part of freeing the opts->buffer.
Switch to checking whether the final buffer is the same as the
buffer we started with, instead of assuming the value we started
with is always opts_in->buffer.
At the moment all the callers pass a non-NULL opts argument, so
we never saw any crashes in practice.
Fixes: Coverity CID 1432302
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201103115257.23623-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In socket_accept() we use setsockopt() to set SO_RCVTIMEO,
but we don't check the return value for failure. Do so.
Fixes: Coverity CID 1432321
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201103115112.19211-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The option `libexecdir` is relative to `prefix` (see
https://mesonbuild.com/Builtin-options.html), so we have to be aware
of this when creating 50-qemu-gpu.json and
50-qemu-virtiofsd.json. Otherwise, tools like libvirt will not be able
to find the executable.
Fixes: 16bf7a3326 ("configure: move directory options from config-host.mak to meson")
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20201103112333.24734-1-mhartmay@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson 0.56.0 correctly builds non-PIC static libraries with -fPIE if
b_pie=true. We do not have to pass b_staticpic=true if PIE is requested
if Meson is new-enough, which improves performance.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
https://bugs.launchpad.net/qemu/+bug/1878642
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201102163336.115444-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libFuzzer triggered the following assertion:
cat << EOF | qemu-system-i386 -M pc-q35-5.0 \
-nographic -monitor none -serial none \
-qtest stdio -d guest_errors -trace pci\*
outl 0xcf8 0x8400f841
outl 0xcfc 0xebed205d
outl 0x5d02 0xedf82049
EOF
pci_cfg_write ICH9-LPC 31:0 @0x41 <- 0xebed205d
hw/pci/pci.c:268: int pci_bus_get_irq_level(PCIBus *, int): Assertion `irq_num < bus->nirq' failed.
This is because ich9_lpc_sci_irq() returns -1 for reserved
(illegal) values, but ich9_lpc_pmbase_sci_update() considers
it valid and store it in a 8-bit unsigned type. Then the 255
value is used as GSI IRQ, resulting in a PIRQ value of 247,
more than ICH9_LPC_NB_PIRQS (8).
Fix by simply ignoring the invalid access (and reporting it):
pci_cfg_write ICH9-LPC 31:0 @0x41 <- 0xebed205d
ICH9 LPC: SCI IRQ SEL #3 is reserved
pci_cfg_read mch 00:0 @0x0 -> 0x8086
pci_cfg_read mch 00:0 @0x0 -> 0x29c08086
...
Cc: qemu-stable@nongnu.org
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: 8f242cb724 ("ich9: implement SCI_IRQ_SEL register")
BugLink: https://bugs.launchpad.net/qemu/+bug/1878642
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200717151705.18611-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
OSS-Fuzz changed the way it scans for fuzzers in $DEST_DIR. The new code
also scans subdirectories for fuzzers. This means that OSS-Fuzz is
considering bin/qemu-fuzz-i386 as an independent fuzzer (it is not - it
requires a --fuzz-target argument). This has led to coverage-build
failures and false crash reports. To work around this, we take advantage
of OSS-Fuzz' filename extension check - OSS-Fuzz will not run anything
that has an extension that is not ".exe":
https://github.com/google/oss-fuzz/blob/master/infra/utils.py#L115
Reported-by: OSS-Fuzz (Issue 26725)
Reported-by: OSS-Fuzz (Issue 26679)
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201101212245.185819-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We removed the global_locking field in commit 4174495408,
leaving dead code around the 'unlocked' variable. Remove it
to fix the DEADCODE issue reported by Coverity (CID 1432876).
Fixes: 4174495408 ("exec: Remove MemoryRegion::global_locking field")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201030153752.1557776-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Memory returned by get_relocated_path must be freed with
free or g_free depending on the path that the function
took; Coverity takes exception to this practice. The
fix lets caller use g_free as is standard in QEMU.
While at it, mention the requirements on the caller in
the doc comment.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* add guest-get-disks for w32/linux
* add guest-{add,remove,get}-authorized-keys
* fix API violations and schema documentation inconsistencies with
recently-added guest-get-devices
v3:
- fix checkpatch errors regarding disallowed usages of g_assert*
macros and other warnings
v2:
- fix BSD build error due to missing stub for guest_get_disks
- fix clang build error on linux due to unused variable
- disable qga-ssh-test for now due to a memory leak within GLib when
G_TEST_OPTION_ISOLATE_DIRS is passed to g_test_init() since it
break Gitlab CI build-oss-fuzz test
- rebased and re-tested on master
-----BEGIN PGP SIGNATURE-----
iQFJBAABCgAzFiEEzqzJ4VU066u4LT+gM1PJzvEItYQFAl+gwNoVHG1pY2hhZWwu
cm90aEBhbWQuY29tAAoJEDNTyc7xCLWEWK0H/1ThOQTqLEy7jKqQI5t2mcJxqMqS
4B8Ob7BnoMuiLqzsFJBSajf9LzbYYiuyVg/1jintffpCd6ygQLL97PPX2ZL9FS1Q
ZJanFxVDcYcqcnpr5zEnc97IieVt3h6kHTo4Gw7exxzzQaofTdc+JcCaxyMy1rGH
fagNyk9CZDxdfqm71b2ZAT/y9Oylg4rkkZEP7QuQpFLkUwRjbmfH7z0emIoNMoVJ
I0NCRnVIGmn8CrCOttO4lmlLyty5xR9s996MvA4uyZ26F/tTzw7ybfa8fHLVIHgg
LLO2VDL63pnD6G9D+szkwI+2pkTaTLyMsqVK+c63BNnj4RPYM+iU4ziD43Y=
=M/ca
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2020-10-27-v3-tag' into staging
qemu-ga patch queue for soft-freeze
* add guest-get-disks for w32/linux
* add guest-{add,remove,get}-authorized-keys
* fix API violations and schema documentation inconsistencies with
recently-added guest-get-devices
v3:
- fix checkpatch errors regarding disallowed usages of g_assert*
macros and other warnings
v2:
- fix BSD build error due to missing stub for guest_get_disks
- fix clang build error on linux due to unused variable
- disable qga-ssh-test for now due to a memory leak within GLib when
G_TEST_OPTION_ISOLATE_DIRS is passed to g_test_init() since it
break Gitlab CI build-oss-fuzz test
- rebased and re-tested on master
# gpg: Signature made Tue 03 Nov 2020 02:30:50 GMT
# gpg: using RSA key CEACC9E15534EBABB82D3FA03353C9CEF108B584
# gpg: issuer "michael.roth@amd.com"
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>" [full]
# gpg: aka "Michael Roth <mdroth@utexas.edu>" [full]
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" [full]
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2020-10-27-v3-tag:
qga: add ssh-get-authorized-keys
meson: minor simplification
qga: add *reset argument to ssh-add-authorized-keys
qga: add ssh-{add,remove}-authorized-keys
glib-compat: add g_unix_get_passwd_entry_qemu()
qga: add implementation of guest-get-disks for Windows
qga: add implementation of guest-get-disks for Linux
qga: add command guest-get-disks
qga: Flatten simple union GuestDeviceId
qga-win: Fix guest-get-devices error API violations
qga: Use common time encoding for guest-get-devices 'driver-date'
qga: Rename guest-get-devices return member 'address' to 'id'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix-up merge conflicts due to qga-ssh-test being disabled in earlier
patch due to G_TEST_OPTION_ISOLATE_DIRS triggering build-oss-fuzz
leak detector.
*fix up style and disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
I prefer 'reset' over 'clear', since 'clear' and keys may have some
other relations or meaning.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
Add new commands to add and remove SSH public keys from
~/.ssh/authorized_keys.
I took a different approach for testing, including the unit tests right
with the code. I wanted to overwrite the function to get the user
details, I couldn't easily do that over QMP. Furthermore, I prefer
having unit tests very close to the code, and unit files that are domain
specific (commands-posix is too crowded already). FWIW, that
coding/testing style is Rust-style (where tests can or should even be
part of the documentation!).
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1885332
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
*squashed in fix-ups for setting file ownership and use of QAPI
conditionals for CONFIG_POSIX instead of stub definitions
*disable qga-ssh-test for now due to G_TEST_OPTION_ISOLATE_DIRS
triggering leak detector in build-oss-fuzz
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
The glib function was introduced in 2.64. It's a safer version of
getpwnam, and also simpler to use than getpwnam_r.
Currently, it's only use by the next patch in qemu-ga, which doesn't
(well well...) need the thread safety guarantees. Since the fallback
version is still unsafe, I would rather keep the _qemu postfix, to make
sure it's not being misused by mistake. When/if necessary, we can
implement a safer fallback and drop the _qemu suffix.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
*fix checkpatch warnings about newlines before/after block comments
Signed-off-by: Michael Roth <michael.roth@amd.com>
Fixes for postcopy migration test hang
A seccomp crash for virtiofsd on some !x86
Help message and minor CID fix
And another crack at Max's set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=cbDl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201102a' into staging
Migration and virtiofs fixes 2020-11-02
Fixes for postcopy migration test hang
A seccomp crash for virtiofsd on some !x86
Help message and minor CID fix
And another crack at Max's set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 02 Nov 2020 19:54:59 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20201102a:
tests/acceptance: Add virtiofs_submounts.py
tests/acceptance/boot_linux: Accept SSH pubkey
virtiofsd: Announce sub-mount points
virtiofsd: Add mount ID to the lo_inode key
meson.build: Check for statx()
virtiofsd: Add attr_flags to fuse_entry_param
virtiofsd: Check FUSE_SUBMOUNTS
virtiofsd: Fix the help message of posix lock
tools/virtiofsd: Check vu_init() return value (CID 1435958)
virtiofsd: Seccomp: Add 'send' for syslog
migration: Postpone the kick of the fault thread after recover
migration: Unify reset of last_rb on destination node when recover
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test invokes several shell scripts to create a random directory
tree full of submounts, and then check in the VM whether every submount
has its own ID and the structure looks as expected.
(Note that the test scripts must be non-executable, so Avocado will not
try to execute them as if they were tests on their own, too.)
Because at this commit's date it is unlikely that the Linux kernel on
the image provided by boot_linux.py supports submounts in virtio-fs, the
test will be cancelled if no custom Linux binary is provided through the
vmlinuz parameter. (The on-image kernel can be used by providing an
empty string via vmlinuz=.)
So, invoking the test can be done as follows:
$ avocado run \
tests/acceptance/virtiofs_submounts.py \
-p vmlinuz=/path/to/linux/build/arch/x86/boot/bzImage
This test requires root privileges (through passwordless sudo -n),
because at this point, virtiofsd requires them. (If you have a
timestamp_timeout period for sudoers (e.g. the default of 5 min), you
can provide this by executing something like "sudo true" before invoking
Avocado.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201102161859.156603-8-mreitz@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Let download_cloudinit() take an optional pubkey, which subclasses of
BootLinux can pass through setUp().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-7-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Whenever we encounter a directory with an st_dev or mount ID that
differs from that of its parent, we set the FUSE_ATTR_SUBMOUNT flag so
the guest can create a submount for it.
We only need to do so in lo_do_lookup(). The following functions return
a fuse_attr object:
- lo_create(), though fuse_reply_create(): Calls lo_do_lookup().
- lo_lookup(), though fuse_reply_entry(): Calls lo_do_lookup().
- lo_mknod_symlink(), through fuse_reply_entry(): Calls lo_do_lookup().
- lo_link(), through fuse_reply_entry(): Creating a link cannot create a
submount, so there is no need to check for it.
- lo_getattr(), through fuse_reply_attr(): Announcing submounts when the
node is first detected (at lookup) is sufficient. We do not need to
return the submount attribute later.
- lo_do_readdir(), through fuse_add_direntry_plus(): Calls
lo_do_lookup().
Make announcing submounts optional, so submounts are only announced to
the guest with the announce_submounts option. Some users may prefer the
current behavior, so that the guest learns nothing about the host mount
structure.
(announce_submounts is force-disabled when the guest does not present
the FUSE_SUBMOUNTS capability, or when there is no statx().)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-6-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Using st_dev is not sufficient to uniquely identify a mount: You can
mount the same device twice, but those are still separate trees, and
e.g. by mounting something else inside one of them, they may differ.
Using statx(), we can get a mount ID that uniquely identifies a mount.
If that is available, add it to the lo_inode key.
Most of this patch is taken from Miklos's mail here:
https://marc.info/?l=fuse-devel&m=160062521827983
(virtiofsd-use-mount-id.patch attachment)
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-5-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Check whether the glibc provides statx() and if so, define CONFIG_STATX.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-4-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fuse_entry_param is converted to fuse_attr on the line (by
fill_entry()), so it should have a member that mirrors fuse_attr.flags.
fill_entry() should then copy this fuse_entry_param.attr_flags to
fuse_attr.flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-3-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
FUSE_SUBMOUNTS is a pure indicator by the kernel to signal that it
supports submounts. It does not check its state in the init reply, so
there is nothing for fuse_lowlevel.c to do but to check its existence
and copy it into fuse_conn_info.capable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-2-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The commit 88fc107956 disabled remote
posix locks by default. But the --help message still says it is enabled
by default. So fix it to output no_posix_lock.
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Message-Id: <20201027081558.29904-1-zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since commit 6f5fd83788, vu_init() can fail if malloc() returns NULL.
This fixes the following Coverity warning:
CID 1435958 (#1 of 1): Unchecked return value (CHECKED_RETURN)
Fixes: 6f5fd83788 ("libvhost-user: support many virtqueues")
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201102092339.2034297-1-philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
On ppc, and some other archs, it looks like syslog ends up using 'send'
rather than 'sendto'.
Reference: https://github.com/kata-containers/kata-containers/issues/1050
Reported-by: amulmek1@in.ibm.com
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102150750.34565-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The new migrate_send_rp_req_pages_pending() call should greatly improve
destination responsiveness because it will resync faulted address after
postcopy recovery. However it is also the 1st place to initiate the page
request from the main thread.
One thing is overlooked on that migrate_send_rp_message_req_pages() is not
designed to be thread-safe. So if we wake the fault thread before syncing all
the faulted pages in the main thread, it means they can race.
Postpone the wake up operation after the sync of faulted addresses.
Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201102153010.11979-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When postcopy recover happens, we need to reset last_rb after each return of
postcopy_pause_fault_thread() because that means we just got the postcopy
migration continued.
Unify this reset to the place right before we want to kick the fault thread
again, when we get the command MIG_CMD_POSTCOPY_RESUME from source.
This is actually more than that - because the main thread on destination will
now be able to call migrate_send_rp_req_pages_pending() too, so the fault
thread is not the only user of last_rb now. Move the reset earlier will allow
the first call to migrate_send_rp_req_pages_pending() to use the reset value
even if called from the main thread.
(NOTE: this is not a real fix to 0c26781c09 mentioned below, however it is just
a mark that when picking up 0c26781c09 we'd better have this one too; the real
fix will come later)
Fixes: 0c26781c09 ("migration: Sync requested pages after postcopy recovery")
Tested-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201102153010.11979-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The command lists all the physical disk drives. Unlike for Linux
partitions and virtual volumes are not listed.
Example output:
{
"return": [
{
"name": "\\\\.\\PhysicalDrive0",
"partition": false,
"address": {
"serial": "QM00001",
"bus-type": "sata",
...
},
"dependents": []
}
]
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The command lists all disks (real and virtual) as well as disk
partitions. For each disk the list of dependent disks is also listed and
/dev path is used as a handle so it can be matched with "name" field of
other returned disk entries. For disk partitions the "dependents" list
is populated with the the parent device for easier tracking of
hierarchy.
Example output:
{
"return": [
...
{
"name": "/dev/dm-0",
"partition": false,
"dependents": [
"/dev/sda2"
],
"alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7"
},
{
"name": "/dev/sda2",
"partition": true,
"dependents": [
"/dev/sda"
]
},
{
"name": "/dev/sda",
"partition": false,
"address": {
"serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
"bus-type": "sata",
...
"dev": "/dev/sda",
"target": 0
},
"dependents": []
},
...
]
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*add missing stub for !defined(CONFIG_FSFREEZE)
*remove unused deps_dir variable
Signed-off-by: Michael Roth <michael.roth@amd.com>
-----BEGIN PGP SIGNATURE-----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=s4KC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into staging
nvme pull 2 Nov 2020
# gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT
# gpg: using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0
# gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown]
# gpg: aka "Keith Busch <keith.busch@gmail.com>" [unknown]
# gpg: aka "Keith Busch <keith.busch@intel.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5 02EC 6251 5661 0A4F 6CC0
* remotes/nvme/tags/pull-nvme-20201102: (30 commits)
hw/block/nvme: fix queue identifer validation
hw/block/nvme: fix create IO SQ/CQ status codes
hw/block/nvme: fix prp mapping status codes
hw/block/nvme: report actual LBA data shift in LBAF
hw/block/nvme: add trace event for requests with non-zero status code
hw/block/nvme: add nsid to get/setfeat trace events
hw/block/nvme: reject io commands if only admin command set selected
hw/block/nvme: support for admin-only command set
hw/block/nvme: validate command set selected
hw/block/nvme: support per-namespace smart log
hw/block/nvme: fix log page offset check
hw/block/nvme: remove pointless rw indirection
hw/block/nvme: update nsid when registered
hw/block/nvme: change controller pci id
pci: allocate pci id for nvme
hw/block/nvme: support multiple namespaces
hw/block/nvme: refactor identify active namespace id list
hw/block/nvme: add support for sgl bit bucket descriptor
hw/block/nvme: add support for scatter gather lists
hw/block/nvme: harden cmb access
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The randomness tests in the NPCM7xx RNG test fail intermittently
but fairly frequently. On my machine running the test in a loop:
while QTEST_QEMU_BINARY=./qemu-system-aarch64 ./tests/qtest/npcm7xx_rng-test; do true; done
will fail in less than a minute with an error like:
ERROR:../../tests/qtest/npcm7xx_rng-test.c:256:test_first_byte_runs:
assertion failed (calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE) > 0.01): (0.00286205989 > 0.01)
(Failures have been observed on all 4 of the randomness tests,
not just first_byte_runs.)
It's not clear why these tests are failing like this, but intermittent
failures make CI and merge testing awkward, so disable running them
unless a developer specifically sets QEMU_TEST_FLAKY_RNG_TESTS when
running the test suite, until we work out the cause.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201102152454.8287-1-peter.maydell@linaro.org
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Sphinx 3.2 is pickier than earlier versions about the option:: markup,
and complains about our usage in qemu-option-trace.rst:
../../docs/qemu-option-trace.rst.inc:4:Malformed option description
'[enable=]PATTERN', should look like "opt", "-opt args", "--opt args",
"/opt args" or "+opt args"
In this file, we're really trying to document the different parts of
the top-level --trace option, which qemu-nbd.rst and qemu-img.rst
have already introduced with an option:: markup. So it's not right
to use option:: here anyway. Switch to a different markup
(definition lists) which gives about the same formatted output.
(Unlike option::, this markup doesn't produce index entries; but
at the moment we don't do anything much with indexes anyway, and
in any case I think it doesn't make much sense to have individual
index entries for the sub-parts of the --trace option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-3-peter.maydell@linaro.org
The kerneldoc script currently emits Sphinx markup for a macro with
arguments that uses the c:function directive. This is correct for
Sphinx versions earlier than Sphinx 3, where c:macro doesn't allow
documentation of macros with arguments and c:function is not picky
about the syntax of what it is passed. However, in Sphinx 3 the
c:macro directive was enhanced to support macros with arguments,
and c:function was made more picky about what syntax it accepted.
When kerneldoc is told that it needs to produce output for Sphinx
3 or later, make it emit c:function only for functions and c:macro
for macros with arguments. We assume that anything with a return
type is a function and anything without is a macro.
This fixes the Sphinx error:
/home/petmay01/linaro/qemu-from-laptop/qemu/docs/../include/qom/object.h:155:Error in declarator
If declarator-id with parameters (e.g., 'void f(int arg)'):
Invalid C declaration: Expected identifier in nested name. [error at 25]
DECLARE_INSTANCE_CHECKER ( InstanceType, OBJ_NAME, TYPENAME)
-------------------------^
If parenthesis in noptr-declarator (e.g., 'void (*f(int arg))(double)'):
Error in declarator or parameters
Invalid C declaration: Expecting "(" in parameters. [error at 39]
DECLARE_INSTANCE_CHECKER ( InstanceType, OBJ_NAME, TYPENAME)
---------------------------------------^
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201030174700.7204-2-peter.maydell@linaro.org
In gicv3_init_cpuif() we copy the ARMCPU gicv3_maintenance_interrupt
into the GICv3CPUState struct's maintenance_irq field. This will
only work if the board happens to have already wired up the CPU
maintenance IRQ before the GIC was realized. Unfortunately this is
not the case for the 'virt' board, and so the value that gets copied
is NULL (since a qemu_irq is really a pointer to an IRQState struct
under the hood). The effect is that the CPU interface code never
actually raises the maintenance interrupt line.
Instead, since the GICv3CPUState has a pointer to the CPUState, make
the dereference at the point where we want to raise the interrupt, to
avoid an implicit requirement on board code to wire things up in a
particular order.
Reported-by: Jose Martins <josemartins90@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201009153904.28529-1-peter.maydell@linaro.org
Reviewed-by: Luc Michel <luc@lmichel.fr>
On some hosts (eg Ubuntu Bionic) pkg-config returns a set of
libraries for gio-2.0 which don't actually work when compiling
statically. (Specifically, the returned library string includes
-lmount, but not -lblkid which -lmount depends upon, so linking
fails due to missing symbols.)
Check that the libraries work, and don't enable gio if they don't,
in the same way we do for gnutls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200928160402.7961-1-peter.maydell@linaro.org
In arm_v7m_mmu_idx_for_secstate() we get the 'priv' level to pass to
armv7m_mmu_idx_for_secstate_and_priv() by calling arm_current_el().
This is incorrect when the security state being queried is not the
current one, because arm_current_el() uses the current security state
to determine which of the banked CONTROL.nPRIV bits to look at.
The effect was that if (for instance) Secure state was in privileged
mode but Non-Secure was not then we would return the wrong MMU index.
The only places where we are using this function in a way that could
trigger this bug are for the stack loads during a v8M function-return
and for the instruction fetch of a v8M SG insn.
Fix the bug by expanding out the M-profile version of the
arm_current_el() logic inline so it can use the passed in secstate
rather than env->v7m.secure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201022164408.13214-1-peter.maydell@linaro.org
In exynos4210_fimd_update(), the pointer s is dereferinced before
being check if it is valid, which may lead to NULL pointer dereference.
So move the assignment to global_width after checking that the s is valid.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5F9F8D88.9030102@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In omap_lcd_interrupts(), the pointer omap_lcd is dereferinced before
being check if it is valid, which may lead to NULL pointer dereference.
So move the assignment to surface after checking that the omap_lcd is valid
and move surface_bits_per_pixel(surface) to after the surface assignment.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Message-id: 5F9CDB8A.9000001@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting a CPU with EL3 using the -kernel flag, set up CPTR_EL3 so
that SVE will not trap to EL3.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030151541.11976-1-remi@remlab.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the BIT_ULL() macro to ensure we use 64-bit arithmetic.
This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN):
CID 1432363 (#1 of 1): Unintentional integer overflow:
overflow_before_widen:
Potentially overflowing expression 1 << scale with type int
(32 bits, signed) is evaluated using 32-bit arithmetic, and
then used in a context that expects an expression of type
hwaddr (64 bits, unsigned).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201030144617.1535064-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we're using the capstone disassembler, disassembly of a run of
instructions more than 32 bytes long disassembles the wrong data for
instructions beyond the 32 byte mark:
(qemu) xp /16x 0x100
0000000000000100: 0x00000005 0x54410001 0x00000001 0x00001000
0000000000000110: 0x00000000 0x00000004 0x54410002 0x3c000000
0000000000000120: 0x00000000 0x00000004 0x54410009 0x74736574
0000000000000130: 0x00000000 0x00000000 0x00000000 0x00000000
(qemu) xp /16i 0x100
0x00000100: 00000005 andeq r0, r0, r5
0x00000104: 54410001 strbpl r0, [r1], #-1
0x00000108: 00000001 andeq r0, r0, r1
0x0000010c: 00001000 andeq r1, r0, r0
0x00000110: 00000000 andeq r0, r0, r0
0x00000114: 00000004 andeq r0, r0, r4
0x00000118: 54410002 strbpl r0, [r1], #-2
0x0000011c: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c
0x00000120: 54410001 strbpl r0, [r1], #-1
0x00000124: 00000001 andeq r0, r0, r1
0x00000128: 00001000 andeq r1, r0, r0
0x0000012c: 00000000 andeq r0, r0, r0
0x00000130: 00000004 andeq r0, r0, r4
0x00000134: 54410002 strbpl r0, [r1], #-2
0x00000138: 3c000000 .byte 0x00, 0x00, 0x00, 0x3c
0x0000013c: 00000000 andeq r0, r0, r0
Here the disassembly of 0x120..0x13f is using the data that is in
0x104..0x123.
This is caused by passing the wrong value to the read_memory_func().
The intention is that at this point in the loop the 'cap_buf' buffer
already contains 'csize' bytes of data for the instruction at guest
addr 'pc', and we want to read in an extra 'tsize' bytes. Those
extra bytes are therefore at 'pc + csize', not 'pc'. On the first
time through the loop 'csize' happens to be zero, so the initial read
of 32 bytes into cap_buf is correct and as long as the disassembly
never needs to read more data we return the correct information.
Use the correct guest address in the call to read_memory_func().
Cc: qemu-stable@nongnu.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1900779
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201022132445.25039-1-peter.maydell@linaro.org
Secure mode is not exempted from checking SCR_EL3.TLOR, and in the
future HCR_EL2.TLOR when S-EL2 is enabled.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HCR should be applied when NS is set, not when it is cleared.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The helper functions for performing the udot/sdot operations against
a scalar were not using an address-swizzling macro when converting
the index of the scalar element into a pointer into the vm array.
This had no effect on little-endian hosts but meant we generated
incorrect results on big-endian hosts.
For these insns, the index is indexing over group of 4 8-bit values,
so 32 bits per indexed entity, and H4() is therefore what we want.
(For Neon the only possible input indexes are 0 and 1.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-3-peter.maydell@linaro.org
In the neon_padd/pmax/pmin helpers for float16, a cut-and-paste error
meant we were using the H4() address swizzler macro rather than the
H2() which is required for 2-byte data. This had no effect on
little-endian hosts but meant we put the result data into the
destination Dreg in the wrong order on big-endian hosts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201028191712.4910-2-peter.maydell@linaro.org
We can use proper widening loads to extend 32-bit inputs,
and skip the "widenfn" step.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In both cases, we can sink the write-back and perform
the accumulate into the normal destination temps.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
