VMware ESX hosts also use different create and extent types for flat
files, respectively "vmfs" and "VMFS". This is not documented, but it
can be found at http://kb.vmware.com/kb/10002511 (Recreating a missing
virtual machine disk (VMDK) descriptor file).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMware ESX hosts use a variant of the VMDK3 format, identified by the
vmfsSparse create type ad the VMFSSPARSE extent type.
It has 16 KB grain tables (L2) and a variable-size grain directory (L1).
In addition, the grain size is always 512, but that is not a problem
because it is included in the header.
The format of the extents is documented in the VMDK spec. The format
of the descriptor file is not documented precisely, but it can be
found at http://kb.vmware.com/kb/10026353 (Recreating a missing virtual
machine disk (VMDK) descriptor file for delta disks).
With these patches, vmfsSparse files only work if opened through the
descriptor file. Data files without descriptor files, as far as I
could understand, are not supported by ESX.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
--
v2: Rebase to patch 01.
Change le64_to_cpu to le32_to_cpu.
Rename vmdk_open_vmdk3 to vmdk_open_vmfs_sparse, which represents the
current usage of this format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMDK3 header has the field l1dir_size, but vmdk_open_vmdk3 hardcoded the
value. This patch honors the header field.
And the L2 table size is 4096 according to VMDK spec[1], instead of
1 << 9 (512).
[1]:
http://www.vmware.com/support/developer/vddk/vmdk_50_technote.pdf?src=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This header check is common to VMDK3 and VMDK4, so move it into
vmdk_add_extent().
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When user tries to use read-only whitelist format in the command line
option, failure message was "'foo' invalid format". It might be invalid
only for writable, but valid for read-only, so it is confusing. Give the
user easier to understand information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While Asias is debugging an issue creating qcow2 images on top of
non-file protocols. It boils down to this example using NBD:
$ qemu-io -c 'open -g nbd+unix:///?socket=/tmp/nbd.sock' -c 'read -v 0 512'
Notice the open -g option to set bs->growable. This means you can
read/write beyond end of file. Reading beyond end of file is supposed
to produce zeroes.
We rely on this behavior in qcow2_create2() during qcow2 image
creation. We create a new file and then write the qcow2 header
structure using bdrv_pwrite(). Since QCowHeader is not a multiple of
sector size, block.c first uses bdrv_read() on the empty file to fetch
the first sector (should be all zeroes).
Here is the output from the qemu-io NBD example above:
$ qemu-io -c 'open -g nbd+unix:///?socket=/tmp/nbd.sock' -c 'read -v 0 512'
00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
00000010: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
00000020: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
...
We are not zeroing the buffer! As a result qcow2 image creation on top
of protocols is not guaranteed to work even when file creation is
supported by the protocol.
[Adapted this patch to use bs->zero_beyond_eof.
-- Stefan]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).
We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.
[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
By the time that qemu 1.7 will be released, enough time will have passed
since qemu 1.1, which is the first version to understand version 3
images, that changing the default shouldn't hurt many people any more
and the benefits of using the new format outweigh the pain.
qemu-iotests already runs with compat=1.1 by default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Qnph
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130820' into staging
target-arm queue
# gpg: Signature made Tue 20 Aug 2013 08:56:28 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Peter Maydell (20) and Peter Chubb (1)
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130820: (21 commits)
hw/timer/imx_epit: Simplify and fix imx_epit implementation
default-configs: Fix A9MP and A15MP config names
hw/cpu/a15mpcore: Wire generic timer outputs to GIC inputs
target-arm: Implement the generic timer
target-arm: Support coprocessor registers which do I/O
target-arm: Allow raw_read() and raw_write() to handle 64 bit regs
hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()
hw/arm/xilinx_zynq: Don't use arm_pic_init_cpu()
hw/arm/vexpress: Don't use arm_pic_init_cpu()
hw/arm/versatilepb: Don't use arm_pic_init_cpu()
hw/arm/strongarm: Don't use arm_pic_init_cpu()
hw/arm/realview: Don't use arm_pic_init_cpu()
hw/arm/omap*: Don't use arm_pic_init_cpu()
hw/arm/musicpal: Don't use arm_pic_init_cpu()
hw/arm/kzm: Don't use arm_pic_init_cpu()
hw/arm/integratorcp: Don't use arm_pic_init_cpu()
hw/arm/highbank: Don't use arm_pic_init_cpu()
hw/arm/exynos4210: Don't use arm_pic_init_cpu()
hw/arm/armv7m: Don't use arm_pic_init_cpu()
target-arm: Make IRQ and FIQ gpio lines on the CPU object
...
Message-id: 1377007680-4934-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Stefan Hajnoczi
# Via Stefan Hajnoczi
* stefanha/block-next:
aio: drop io_flush argument
tests: drop event_active_cb()
thread-pool: drop thread_pool_active()
dataplane/virtio-blk: drop flush_true() and flush_io()
block/ssh: drop return_true()
block/sheepdog: drop have_co_req() and aio_flush_request()
block/rbd: drop qemu_rbd_aio_flush_cb()
block/nbd: drop nbd_have_request()
block/linux-aio: drop qemu_laio_completion_cb()
block/iscsi: drop iscsi_process_flush()
block/gluster: drop qemu_gluster_aio_flush_cb()
block/curl: drop curl_aio_flush()
aio: stop using .io_flush()
tests: adjust test-thread-pool to new aio_poll() semantics
tests: adjust test-aio to new aio_poll() semantics
dataplane/virtio-blk: check exit conditions before aio_poll()
block: stop relying on io_flush() in bdrv_drain_all()
block: ensure bdrv_drain_all() works during bdrv_delete()
Message-id: 1376921877-9576-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Richard Henderson
# Via Richard Henderson
* rth/axp-next:
target-alpha: Implement the typhoon iommu
target-alpha: Consider the superpage when threading and ending TBs
target-alpha: Use goto_tb in call_pal
target-alpha: Implement call_pal without an exception
Message-id: 1376720412-2165-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
When imx_epit.c was last refactored, a common usecase (comparison
register zero) broke. This patch fixes that, and simplifies the code
yet more. It also fixes a major thinko in the reset path --- the
wrong bits in the control register were being cleared.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Reviewed-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When individual CONFIG_ switches for the A9MPcore and A15MPcore
devices were created, they were inadvertently given incorrect names
(CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are
"Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is
a different (rather older) CPU than the Cortex-A9. Rename the
CONFIG_ switches to bring them into line with the source file
names and CPU names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
Now our A15 CPU implements the generic timers, we can wire them
up to the appropriate inputs on the GIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1376065080-26661-5-git-send-email-peter.maydell@linaro.org
The ARMv7 architecture specifies a 'generic timer' which is implemented
via cp15 registers. Newer kernels will prefer to use this rather than
a devboard-level timer. Implement the generic timer for TCG; for KVM
we will already use the hardware's virtualized timer for this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1376065080-26661-4-git-send-email-peter.maydell@linaro.org
Add an ARM_CP_IO flag which an ARMCPRegInfo definition can use to
indicate that the register's implementation does I/O and thus
its accesses need to be surrounded by gen_io_start()/gen_io_end()
in order for icount to work. Most notably, cp registers which
implement clocks or timers need this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-3-git-send-email-peter.maydell@linaro.org
Extend the raw_read() and raw_write() helper accessors so that
they can be used for 64 bit registers as well as 32 bit registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1376065080-26661-2-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-14-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-13-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-12-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-11-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-10-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-9-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-8-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-7-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-6-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-5-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-4-git-send-email-peter.maydell@linaro.org
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-3-git-send-email-peter.maydell@linaro.org
Now that ARMCPU is a subclass of DeviceState, we can make the
CPU's inbound IRQ and FIQ lines be simply gpio lines, which
means we can remove the odd arm_pic shim.
We retain the arm_pic_init_cpu() function as a backwards
compatibility shim layer so we can convert the board models
to get the IRQ and FIQ lines directly from the ARMCPU
object one at a time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-2-git-send-email-peter.maydell@linaro.org
The 'int' loglevel for recording interrupts and exceptions
requires support in the target-specific code. Implement
it for ARM. This improves debug logging in some situations
that were otherwise pretty opaque, such as when we fault
trying to execute at an exception vector address, which
would otherwise cause an infinite loop of taking exceptions
without any indication in the debug log of what was going on.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1375700771-21665-1-git-send-email-peter.maydell@linaro.org
The .io_flush() handler no longer exists and has no users. Drop the
io_flush argument to aio_set_fd_handler() and related functions.
The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the io_flush argument to aio_set_event_notifier().
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop thread_pool_active(). The block
layer is the only thread-pool.c user and it already tracks in-flight
requests, therefore we do not need thread_pool_active().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop qemu_rbd_aio_flush_cb().
qemu_aio_count is unused now so drop it too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop nbd_have_request(). We cannot
drop in_flight since it is still used by other block/nbd.c code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop qemu_laio_completion_cb(). It
turns out that count is now unused so drop that too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since .io_flush() is no longer called we do not need
qemu_gluster_aio_flush_cb() anymore. It turns out that qemu_aio_count
is unused now and can be dropped.
Thanks to Bharata B Rao <bharata@linux.vnet.ibm.com> for catching a
build failure with CONFIG_GLUSTERFS_DISCARD, which has been fixed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.io_flush() is no longer called so drop curl_aio_flush(). The acb[]
array that the function checks is still used in other parts of
block/curl.c. Therefore we cannot remove acb[], it is needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that aio_poll() users check their termination condition themselves,
it is no longer necessary to call .io_flush() handlers.
The behavior of aio_poll() changes as follows:
1. .io_flush() is no longer invoked and file descriptors are *always*
monitored. Previously returning 0 from .io_flush() would skip this file
descriptor.
Due to this change it is essential to check that requests are pending
before calling qemu_aio_wait(). Failure to do so means we block, for
example, waiting for an idle iSCSI socket to become readable when there
are no requests. Currently all qemu_aio_wait()/aio_poll() callers check
before calling.
2. aio_poll() now returns true if progress was made (BH or fd handlers
executed) and false otherwise. Previously it would return true whenever
'busy', which means that .io_flush() returned true. The 'busy' concept
no longer exists so just progress is returned.
Due to this change we need to update tests/test-aio.c which asserts
aio_poll() return values. Note that QEMU doesn't actually rely on these
return values so only tests/test-aio.c cares.
Note that ctx->notifier, the EventNotifier fd used for aio_notify(), is
now handled as a special case. This is a little ugly but maintains
aio_poll() semantics, i.e. aio_notify() does not count as 'progress' and
aio_poll() avoids blocking when the user has not set any fd handlers yet.
Patches after this remove .io_flush() handler code until we can finally
drop the io_flush arguments to aio_set_fd_handler() and friends.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_poll(ctx, true) will soon block when fd handlers have been set.
Previously aio_poll() would return early if all .io_flush() returned
false. This means we need to check the equivalent of the .io_flush()
condition *before* calling aio_poll(ctx, true) to avoid deadlock.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_poll(ctx, true) will soon block if any fd handlers have been set.
Previously it would only block when .io_flush() returned true.
This means that callers must check their wait condition *before*
aio_poll() to avoid deadlock.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check exit conditions before entering blocking aio_poll(). This is
mainly for consistency since it's unlikely that we are stopping in the
first event loop iteration.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
