Needed when moving aml builder code to devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200429140003.7336-3-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200429140003.7336-2-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
A little cleanup is possible because of hotplug_pdev introduction.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20200427182440.92433-3-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Raise an error when trying to hot-plug/unplug a device through QMP to a device
with disabled hot-plug capability. This makes the device behaviour more
consistent and provides an explanation of the failure in the case of
asynchronous unplug.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20200427182440.92433-2-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
We're going to want at least some of the NeonGen* typedefs
for the refactored 32-bit Neon decoder, so move them all
to translate.h since it makes more sense to keep them in
one group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-23-peter.maydell@linaro.org
Convert the Neon VMUL, VMLA, VMLS and VSHL insns in the
3-reg-same grouping to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-20-peter.maydell@linaro.org
Convert the Neon VQADD/VQSUB insns in the 3-reg-same grouping
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-19-peter.maydell@linaro.org
Convert the Neon comparison ops in the 3-reg-same grouping
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-18-peter.maydell@linaro.org
Convert the Neon 3-reg-same VMAX and VMIN insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-17-peter.maydell@linaro.org
Convert the Neon logic ops in the 3-reg-same grouping to decodetree.
Note that for the logic ops the 'size' field forms part of their
decode and the actual operations are always bitwise.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-16-peter.maydell@linaro.org
Convert the Neon 3-reg-same VADD and VSUB insns to decodetree.
Note that we don't need the neon_3r_sizes[op] check here because all
size values are OK for VADD and VSUB; we'll add this when we convert
the first insn that has size restrictions.
For this we need one of the GVecGen*Fn typedefs currently in
translate-a64.h; move them all to translate.h as a block so they
are visible to the 32-bit decoder.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-15-peter.maydell@linaro.org
Convert the Neon "load/store single structure to one lane" insns to
decodetree.
As this is the last set of insns in the neon load/store group,
we can remove the whole disas_neon_ls_insn() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-14-peter.maydell@linaro.org
Convert the Neon "load single structure to all lanes" insns to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-13-peter.maydell@linaro.org
Convert the Neon "load/store multiple structures" insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-12-peter.maydell@linaro.org
Convert the VFM[AS]L (scalar) insns in the 2reg-scalar-ext group
to decodetree. These are the last ones in the group so we can remove
all the legacy decode for the group.
Note that in disas_thumb2_insn() the parts of this encoding space
where the decodetree decoder returns false will correctly be directed
to illegal_op by the "(insn & (1 << 28))" check so they won't fall
into disas_coproc_insn() by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-11-peter.maydell@linaro.org
Convert the V[US]DOT (scalar) insns in the 2reg-scalar-ext group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-10-peter.maydell@linaro.org
Convert VCMLA (scalar) in the 2reg-scalar-ext group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-9-peter.maydell@linaro.org
Convert the VFM[AS]L (vector) insns to decodetree. This is the last
insn in the legacy decoder for the 3same_ext group, so we can
delete the legacy decoder function for the group entirely.
Note that in disas_thumb2_insn() the parts of this encoding space
where the decodetree decoder returns false will correctly be directed
to illegal_op by the "(insn & (1 << 28))" check so they won't fall
into disas_coproc_insn() by mistake.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-8-peter.maydell@linaro.org
Convert the V[US]DOT (vector) insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-7-peter.maydell@linaro.org
Convert the VCADD (vector) insns to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-6-peter.maydell@linaro.org
Convert the VCMLA (vector) insns in the 3same extension group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-5-peter.maydell@linaro.org
Add the infrastructure for building and invoking a decodetree decoder
for the AArch32 Neon encodings. At the moment the new decoder covers
nothing, so we always fall back to the existing hand-written decode.
We follow the same pattern we did for the VFP decodetree conversion
(commit 78e138bc1f and following): code that deals
with Neon will be moving gradually out to translate-neon.vfp.inc,
which we #include into translate.c.
In order to share the decode files between A32 and T32, we
split Neon into 3 parts:
* data-processing
* load-store
* 'shared' encodings
The first two groups of instructions have similar but not identical
A32 and T32 encodings, so we need to manually transform the T32
encoding into the A32 one before calling the decoder; the third group
covers the Neon instructions which are identical in A32 and T32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-4-peter.maydell@linaro.org
We were accidentally permitting decode of Thumb Neon insns even if
the CPU didn't have the FEATURE_NEON bit set, because the feature
check was being done before the call to disas_neon_data_insn() and
disas_neon_ls_insn() in the Arm decoder but was omitted from the
Thumb decoder. Push the feature bit check down into the called
functions so it is done for both Arm and Thumb encodings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200430181003.21682-3-peter.maydell@linaro.org
Somewhere along theline we accidentally added a duplicate
"using D16-D31 when they don't exist" check to do_vfm_dp()
(probably an artifact of a patchseries rebase). Remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200430181003.21682-2-peter.maydell@linaro.org
Add support for the RTC.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-12-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for SD.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-11-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm: versal: Add support for the RTC.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-10-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for SD.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-9-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Embed the APUs into the SoC type.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-8-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Embed the ADMAs into the SoC type.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-7-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Embed the GEMs into the SoC type.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-6-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Embed the UARTs into the SoC type.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix typo xlnx-ve -> xlnx-versal.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move misplaced comment.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-3-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove inclusion of arm_gicv3_common.h, this already gets
included via xlnx-versal.h.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200427181649.26851-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MIDR_EL1 is a 64-bit system register with the top 32-bit being RES0.
Represent it in QEMU's ARMCPU struct with a uint64_t, not a
uint32_t.
This fixes an error when compiling with -Werror=conversion
because we were manipulating the register value using a
local uint64_t variable:
target/arm/cpu64.c: In function ‘aarch64_max_initfn’:
target/arm/cpu64.c:628:21: error: conversion from ‘uint64_t’ {aka ‘long unsigned int’} to ‘uint32_t’ {aka ‘unsigned int’} may change value [-Werror=conversion]
628 | cpu->midr = t;
| ^
and future-proofs us against a possible future architecture
change using some of the top 32 bits.
Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20200428172634.29707-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In aarch64_max_initfn() we update both 32-bit and 64-bit ID
registers. The intended pattern is that for 64-bit ID registers we
use FIELD_DP64 and the uint64_t 't' register, while 32-bit ID
registers use FIELD_DP32 and the uint32_t 'u' register. For
ID_AA64DFR0 we accidentally used 'u', meaning that the top 32 bits of
this 64-bit ID register would end up always zero. Luckily at the
moment that's what they should be anyway, so this bug has no visible
effects.
Use the right-sized variable.
Fixes: 3bec78447a
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200423110915.10527-1-peter.maydell@linaro.org
The ARMv8.2-TTS2UXN feature extends the XN field in stage 2
translation table descriptors from just bit [54] to bits [54:53],
allowing stage 2 to control execution permissions separately for EL0
and EL1. Implement the new semantics of the XN field and enable
the feature for our 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-5-peter.maydell@linaro.org
For ARMv8.2-TTS2UXN, the stage 2 page table walk wants to know
whether the stage 1 access is for EL0 or not, because whether
exec permission is given can depend on whether this is an EL0
or EL1 access. Add a new argument to get_phys_addr_lpae() so
the call sites can pass this information in.
Since get_phys_addr_lpae() doesn't already have a doc comment,
add one so we have a place to put the documentation of the
semantics of the new s1_is_el0 argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-4-peter.maydell@linaro.org
The access_type argument to get_phys_addr_lpae() is an MMUAccessType;
use the enum constant MMU_DATA_LOAD rather than a literal 0 when we
call it in S1_ptw_translate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-3-peter.maydell@linaro.org
We define ARMMMUIdx_Stage2 as being an MMU index which uses a QEMU
TLB. However we never actually use the TLB -- all stage 2 lookups
are done by direct calls to get_phys_addr_lpae() followed by a
physical address load via address_space_ld*().
Remove Stage2 from the list of ARM MMU indexes which correspond to
real core MMU indexes, and instead put it in the set of "NOTLB" ARM
MMU indexes.
This allows us to drop NB_MMU_MODES to 11. It also means we can
safely add support for the ARMv8.3-TTS2UXN extension, which adds
permission bits to the stage 2 descriptors which define execute
permission separatel for EL0 and EL1; supporting that while keeping
Stage2 in a QEMU TLB would require us to use separate TLBs for
"Stage2 for an EL0 access" and "Stage2 for an EL1 access", which is a
lot of extra complication given we aren't even using the QEMU TLB.
In the process of updating the comment on our MMU index use,
fix a couple of other minor errors:
* NS EL2 EL2&0 was missing from the list in the comment
* some text hadn't been updated from when we bumped NB_MMU_MODES
above 8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-2-peter.maydell@linaro.org
By using the TYPE_* definitions for devices, we can:
- quickly find where devices are used with 'git-grep'
- easily rename a device (one-line change).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200428154650.21991-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to Arm ARM, VQDMULL is only valid when U=0, while having
U=1 is unallocated.
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Fixes: 695272dcb9 ("target-arm: Handle UNDEF cases for Neon 3-regs-different-widths")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/rdma: Destroy list mutex when list is destroyed
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJerb8qAAoJEDbUwPDPL+RtxXMIAIuvcJSM1UNjzLTZpSsR3jPc
qGH5QgFdLRajtoiv5+WLs9ZBRQ7GxJJe7Cuzy6TsY9g//Jd6kpwtite8wXR/dKr1
wjG86P6HTXhoD8pKrQzdrn95+vbqnnKgn2SYYwwkCfdkNPnN85xOFIbfXVAKmwDq
PteYkXQn3iOvpHjvZwF48ej2ddBHvdS1MhckPggEvEGz3/0equPQyo7l+P5xc2C6
mY2aJAto6R3uwjc7zBk/BUyNBSs7UmL1eVptiUjEGzNOCIs8j2ui7JYC0BjJtSRH
xPt5Dao7HDlBFOlnCnzx0MWA9gceMfAcZ29vTQogYj/JAvbFU2SkKNL9xc2+tFQ=
=WwAT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcel/tags/rdma-pull-request' into staging
RDMA queue
* hw/rdma: Destroy list mutex when list is destroyed
# gpg: Signature made Sat 02 May 2020 19:42:50 BST
# gpg: using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel.apfelbaum@zoho.com>" [unknown]
# gpg: aka "Marcel Apfelbaum <marcel@redhat.com>" [marginal]
# gpg: aka "Marcel Apfelbaum <marcel.apfelbaum@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F 31F5 36D4 C0F0 CF2F E46D
* remotes/marcel/tags/rdma-pull-request:
hw/rdma: Destroy list mutex when list is destroyed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
List mutex should be destroyed when gs list gets destroyed.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Message-Id: <20200413085738.11145-1-yuval.shaia.ml@gmail.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
This set includes a security fix, other fixes and improvements.
Security fix:
The security fix is for CVE-2020-10717 where, on low RAM hosts,
the guest can potentially exceed the maximum fd limit.
This fix adds some more configuration so that the user
can explicitly set the limit.
Fixes:
Recursive mounting of the exported directory is now used in
the sandbox, such that if there was a mount underneath present at
the time the virtiofsd was started, that mount is also
visible to the guest; in the existing code, only mounts that
happened after startup were visible.
Security improvements:
The jailing for /proc/self/fd is improved - but it's something
that shouldn't be accessible anyway.
Most capabilities are now dropped at startup; again this shouldn't
change any behaviour but is extra protection.
-----BEGIN PGP SIGNATURE-----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=tou1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200501' into staging
virtiofsd: Pull 2020-05-01 (includes CVE fix)
This set includes a security fix, other fixes and improvements.
Security fix:
The security fix is for CVE-2020-10717 where, on low RAM hosts,
the guest can potentially exceed the maximum fd limit.
This fix adds some more configuration so that the user
can explicitly set the limit.
Fixes:
Recursive mounting of the exported directory is now used in
the sandbox, such that if there was a mount underneath present at
the time the virtiofsd was started, that mount is also
visible to the guest; in the existing code, only mounts that
happened after startup were visible.
Security improvements:
The jailing for /proc/self/fd is improved - but it's something
that shouldn't be accessible anyway.
Most capabilities are now dropped at startup; again this shouldn't
change any behaviour but is extra protection.
# gpg: Signature made Fri 01 May 2020 20:06:46 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20200501:
virtiofsd: drop all capabilities in the wait parent process
virtiofsd: only retain file system capabilities
virtiofsd: Show submounts
virtiofsd: jail lo->proc_self_fd
virtiofsd: stay below fs.file-max sysctl value (CVE-2020-10717)
virtiofsd: add --rlimit-nofile=NUM option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All this process does is wait for its child. No capabilities are
needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
virtiofsd runs as root but only needs a subset of root's Linux
capabilities(7). As a file server its purpose is to create and access
files on behalf of a client. It needs to be able to access files with
arbitrary uid/gid owners. It also needs to be create device nodes.
Introduce a Linux capabilities(7) whitelist and drop all capabilities
that we don't need, making the virtiofsd process less powerful than a
regular uid root process.
# cat /proc/PID/status
...
Before After
CapInh: 0000000000000000 0000000000000000
CapPrm: 0000003fffffffff 00000000880000df
CapEff: 0000003fffffffff 00000000880000df
CapBnd: 0000003fffffffff 0000000000000000
CapAmb: 0000000000000000 0000000000000000
Note that file capabilities cannot be used to achieve the same effect on
the virtiofsd executable because mount is used during sandbox setup.
Therefore we drop capabilities programmatically at the right point
during startup.
This patch only affects the sandboxed child process. The parent process
that sits in waitpid(2) still has full root capabilities and will be
addressed in the next patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200416164907.244868-2-stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, setup_mounts() bind-mounts the shared directory without
MS_REC. This makes all submounts disappear.
Pass MS_REC so that the guest can see submounts again.
Fixes: 5baa3b8e95
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424133516.73077-1-mreitz@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Changed Fixes to point to the commit with the problem rather than
the commit that turned it on
