Implemented lpi processing at redistributor to get lpi config info
from lpi configuration table,determine priority,set pending state in
lpi pending table and forward the lpi to cpuif.Added logic to invoke
redistributor lpi processing with translated LPI which set/clear LPI
from ITS device as part of ITS INT,CLEAR,DISCARD command and
GITS_TRANSLATER processing.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-7-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added properties to enable ITS feature and define qemu system
address space memory in gicv3 common,setup distributor and
redistributor registers to indicate LPI support.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-6-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added ITS command queue handling for MAPTI,MAPI commands,handled ITS
translation which triggers an LPI via INT command as well as write
to GITS_TRANSLATER register,defined enum to differentiate between ITS
command interrupt trigger and GITS_TRANSLATER based interrupt trigger.
Each of these commands make use of other functionalities implemented to
get device table entry,collection table entry or interrupt translation
table entry required for their processing.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-5-shashi.mallela@linaro.org
[PMM: use INTERRUPT for ItsCmdType enum name to avoid
conflict with INT type defined by Windows headers]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added functionality to trigger ITS command queue processing on
write to CWRITE register and process each command queue entry to
identify the command type and handle commands like MAPD,MAPC,SYNC.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-4-shashi.mallela@linaro.org
[PMM: fixed format string nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Defined descriptors for ITS device table,collection table and ITS
command queue entities.Implemented register read/write functions,
extract ITS table parameters and command queue parameters,extended
gicv3 common to capture qemu address space(which host the ITS table
platform memories required for subsequent ITS processing) and
initialize the same in ITS device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-3-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added register definitions relevant to ITS,implemented overall
ITS device framework with stubs for ITS control and translater
regions read/write,extended ITS common to handle mmio init between
existing kvm device and newer qemu device.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Message-id: 20210910143951.92242-2-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although we probe for the IPA limits imposed by KVM (and the hardware)
when computing the memory map, we still use the old style '0' when
creating a scratch VM in kvm_arm_create_scratch_host_vcpu().
On systems that are severely IPA challenged (such as the Apple M1),
this results in a failure as KVM cannot use the default 40bit that
'0' represents.
Instead, probe for the extension and use the reported IPA limit
if available.
Cc: Andrew Jones <drjones@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20210822144441.1290891-2-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We've got SW that expects FSBL (Bootlooader) to setup clocks and
resets. It's quite common that users run that SW on QEMU without
FSBL (FSBL typically requires the Xilinx tools installed). That's
fine, since users can stil use -device loader to enable clocks etc.
To help folks understand what's going, a log (guest-error) message
would be helpful here. In particular with the serial port since
things will go very quiet if they get things wrong.
Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-7-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Read or write to uart registers when unclocked or in reset should be
ignored. Add the check there, and as a result of this, the check in
uart_write_tx_fifo() is now unnecessary.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-6-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This converts uart_read() and uart_write() to memop_with_attrs() ops.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-5-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the clock/reset check is done in uart_receive(), but we
can move the check to uart_can_receive() which is earlier.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-4-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present when input clock is disabled, any character transmitted
to tx fifo can still show on the serial line, which is wrong.
Fixes: b636db306e ("hw/char/cadence_uart: add clock support")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210901124521.30599-3-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As of today, when booting upstream U-Boot for Xilinx Zynq, the UART
does not receive anything. Debugging shows that the UART input clock
frequency is zero which prevents the UART from receiving anything as
per the logic in uart_receive().
From zynq_slcr_reset_exit() comment, it intends to compute output
clocks according to ps_clk and registers. zynq_slcr_compute_clocks()
is called to accomplish the task, inside which device_is_in_reset()
is called to actually make the attempt in vain.
Rework reset_hold() and reset_exit() so that in the reset exit phase,
the logic can really compute output clocks in reset_exit().
With this change, upstream U-Boot boots properly again with:
$ qemu-system-arm -M xilinx-zynq-a9 -m 1G -display none -serial null -serial stdio \
-device loader,file=u-boot-dtb.bin,addr=0x4000000,cpu-num=0
Fixes: 38867cb7ec ("hw/misc/zynq_slcr: add clock generation for uarts")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210901124521.30599-2-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
and x86_64. This is for static binaries only, that are relatively small, but
it's better than the 100% instant mmap failre that is the current state of all
things bsd-user in upstream qemu. Future patch sets will refine this, add
the missing system calls, fix bugs preventing more sophisticated programms
from running and add a bunch of new architecture support.
There's three large themes in these patches, though the changes that
represent them are interrelated making it hard to separate out further.
1. Reorganization to support multiple OS and architectures (though I've only
tested FreeBSD, other BSDs might not even compile yet).
2. Diff reduction with the bsd-user fork for several files. These diffs include
changes that borrowed from linux-user as well as changes to make things work
on FreeBSD. The records keeping when this was done, however, was poor at
best, so many of the specific borrowings are going unacknowledged here, apart
from this general ack. These diffs also include some minor code shuffling.
Some of the changes are done specifically to make it easier to rebase
the bsd-user fork's changes when these land in the tree (a number of changes
have been pushed there to make this more possible).
3. Filling in the missing pieces to make things work. There's many changes to
elfload to make it load things in the right places, to find the interpreter
better, etc. There's changes to mmap.c to make the mappings work better and
there's changes to main.c that were inspired, at least, by now-ancient changes
to linux-user's main.c.
I ran checkpatch.pl on this, and there's 350-odd errors it identifies (the vast
majoirty come from BSD's fetish for tabs), so there will need to be a V2 to fix
this at the very least. In addition, the change set is big (about +~4.5k/-~2.5k
lines), so I anticipate some iteration as well just based on its sheer
size. I've tried to keep each set small to make it easy to review in isolation,
but I've also allowed some interrelated ones to get a little bigger than I'd
normally like. I've not done the customary documentation of the expected
checkpatch.pl output because it is large, and because I wanted to get review
of the other parts rolling to get this project unstuck. Future versions of the
patch will document the expected output.
In addition, I noticed a number of places where I could modernize to make the
code match things like linux-user better. I've resisted the urge to do these at
this time, since it would complicate merging the other ~30k lines of diff that
remains after this batch. Future batches should generally be smaller once this
one has landed since they are, by and large, either a bunch of new files to
support armv7, aarch64, riscv64, mips, mipsel, mips64, ppc, ppc64 and ppc64le,
or are adding system calls, which can be done individually or small groups. I've
removed sparc and sparc64 support as they've been removed from FreeBSD and
have been near totally busted for years.
Stacey Son did the bulk of this work originally, but since I had to move things
around so much and/or retool that work in non-trivial ways, I've kept myself as
author, and added his signed-off-by line. I'm unsure of the qemu standard
practice for this, but am happy to learn if this is too far outside its current
mainstream. For a while Sean Bruno did the merges from upstream, and he's
credited using his signed-off-by in appropriate places, though for this patch
set there's only a few. I've tried to ensure that others who have work in
individual patches that I've aggregated together also are reflected in their
signed-off-by. Given the chaotic stat of the upstream repo for its early
history, this may be the best that can be reconstructed at this late date. Most
of these files are 'foundational' so have existed from the earliest days when
record keeping wasn't quite what I'd wish for in hindsight. There was only
really one change that I could easily cherry-pick (Colin's), so I did that.
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=HpB5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bsdimp/tags/pull-bsd-user-20210910' into staging
This series of patches gets me to the point that I can run "Hello World" on i386
and x86_64. This is for static binaries only, that are relatively small, but
it's better than the 100% instant mmap failre that is the current state of all
things bsd-user in upstream qemu. Future patch sets will refine this, add
the missing system calls, fix bugs preventing more sophisticated programms
from running and add a bunch of new architecture support.
There's three large themes in these patches, though the changes that
represent them are interrelated making it hard to separate out further.
1. Reorganization to support multiple OS and architectures (though I've only
tested FreeBSD, other BSDs might not even compile yet).
2. Diff reduction with the bsd-user fork for several files. These diffs include
changes that borrowed from linux-user as well as changes to make things work
on FreeBSD. The records keeping when this was done, however, was poor at
best, so many of the specific borrowings are going unacknowledged here, apart
from this general ack. These diffs also include some minor code shuffling.
Some of the changes are done specifically to make it easier to rebase
the bsd-user fork's changes when these land in the tree (a number of changes
have been pushed there to make this more possible).
3. Filling in the missing pieces to make things work. There's many changes to
elfload to make it load things in the right places, to find the interpreter
better, etc. There's changes to mmap.c to make the mappings work better and
there's changes to main.c that were inspired, at least, by now-ancient changes
to linux-user's main.c.
I ran checkpatch.pl on this, and there's 350-odd errors it identifies (the vast
majoirty come from BSD's fetish for tabs), so there will need to be a V2 to fix
this at the very least. In addition, the change set is big (about +~4.5k/-~2.5k
lines), so I anticipate some iteration as well just based on its sheer
size. I've tried to keep each set small to make it easy to review in isolation,
but I've also allowed some interrelated ones to get a little bigger than I'd
normally like. I've not done the customary documentation of the expected
checkpatch.pl output because it is large, and because I wanted to get review
of the other parts rolling to get this project unstuck. Future versions of the
patch will document the expected output.
In addition, I noticed a number of places where I could modernize to make the
code match things like linux-user better. I've resisted the urge to do these at
this time, since it would complicate merging the other ~30k lines of diff that
remains after this batch. Future batches should generally be smaller once this
one has landed since they are, by and large, either a bunch of new files to
support armv7, aarch64, riscv64, mips, mipsel, mips64, ppc, ppc64 and ppc64le,
or are adding system calls, which can be done individually or small groups. I've
removed sparc and sparc64 support as they've been removed from FreeBSD and
have been near totally busted for years.
Stacey Son did the bulk of this work originally, but since I had to move things
around so much and/or retool that work in non-trivial ways, I've kept myself as
author, and added his signed-off-by line. I'm unsure of the qemu standard
practice for this, but am happy to learn if this is too far outside its current
mainstream. For a while Sean Bruno did the merges from upstream, and he's
credited using his signed-off-by in appropriate places, though for this patch
set there's only a few. I've tried to ensure that others who have work in
individual patches that I've aggregated together also are reflected in their
signed-off-by. Given the chaotic stat of the upstream repo for its early
history, this may be the best that can be reconstructed at this late date. Most
of these files are 'foundational' so have existed from the earliest days when
record keeping wasn't quite what I'd wish for in hindsight. There was only
really one change that I could easily cherry-pick (Colin's), so I did that.
# gpg: Signature made Fri 10 Sep 2021 21:24:08 BST
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* remotes/bsdimp/tags/pull-bsd-user-20210910: (42 commits)
bsd-user: Update mapping to handle reserved and starting conditions
bsd-user: Add '-0 argv0' option to bsd-user/main.c
bsd-user: Implement interlock for atomic operations
bsd-user: move gemu_log to later in the file
bsd-user: Refactor load_elf_sections and is_target_elf_binary
bsd-user: elfload.c style catch up patch
bsd-user: add stubbed out core dump support
bsd-user: Add target_os_user.h to capture the user/kernel structures
bsd-user: Add target_arch_reg to describe a target's register set
bsd-user: update debugging in mmap.c
bsd-user: Rewrite target system call definintion glue
bsd-user: Remove dead #ifdefs from elfload.c
bsd-user: elf cleanup
bsd-user: Add architecture specific signal tramp code
bsd-user: Move stack initializtion into a per-os file.
bsd-user: Implement --seed and initialize random state
bsd-user: *BSD specific siginfo defintions
bsd-user: Add system independent stack, data and text limiting
bsd-user: Create target specific vmparam.h
bsd-user: define max args in terms of pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the reserved base based on what platform we're on, as well as the
start of the mmap range. Update routines that find va ranges to interact
with the reserved ranges as well as properly align the mapping (this is
especially important for targets whose page size does not match the
host's). Loop where appropriate when the initial address space offered
by mmap does not meet the contraints.
This has 18e80c55bb from linux-user folded in to the upstream
bsd-user code as well.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Previously it was impossible to emulate a program with a file name
different from its argv[0]. With this change, you can run
qemu -0 fakename realname args
which runs the program "realname" with an argv of "fakename args".
Signed-off-by: Colin Percival <cperciva@tarsnap.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the internlock in fork_start() and fork_end() to properly cope
with atomic operations and to safely keep state for parent and child
processes.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out load_elf_sections and is_target_elf_binary out of
load_elf_interp.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Various style fixes to elfload.c that were too painful to make earlier
in this series.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a stubbed-out version of the bsd-user fork's core dump support. This
allows elfload.c to be almost the same between what's upstream and
what's in qemu-project upstream w/o the burden of reviewing the core
dump support.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This file evolved over the years to capture the user/kernel interfaces,
including those that changed over time.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
target_reg_t is the normal register. target_fpreg_t is the floating
point registers. target_copy_regs copies the registers out of CPU
context for things like core dumps.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update the debugging code for new features and different targets.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Sean Bruno <sbruno@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Rewrite target definnitions to interface with the FreeBSD system calls.
This covers basic types (time_t, iovec, umtx_time, timespec, timeval,
rusage, rwusage) and basic defines (mmap, rusage). Also included are
FreeBSD version-specific variations.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
LOW_ELF_STACK doesn't exist on FreeBSD and likely never will. Remove it.
Likewise, remove an #if 0 block that's not useful
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move OS-dependent defines into target_os_elf.h. Move the architectural
dependent stuff into target_arch_elf.h. Adjust elfload.c to use
target_create_elf_tables instead of create_elf_tables.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Justin Hibbits <chmeeedalf@gmail.com>
Signed-off-by: Alexander Kabaev <kan@FreeBSD.ORG>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Add a stubbed out version of setup_sigtramp. This is not yet used for
x86, but is used for other architectures. This will be connected in
future commits.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move all of the stack initialization into target_os_stack.h. Each BSD
sets up processes a little differently.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Copy --seed implementation (translated from linux-user's newer command
line scheme to the older one bsd-user still uses). Initialize the
randomness with the glib if a specific seed is specified or use the
qcrypto library if not.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add FreeBSD, NetBSD and OpenBSD values for the various signal info types
and defines to decode different signals to discover more information
about the specific signal types.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Eliminate the x86 specific stack stuff in favor of more generic control
over the process size:
target_maxtsiz max text size
target_dfldsiz initial data size limit
target_maxdsiz max data size
target_dflssiz initial stack size limit
target_maxssiz max stack size
target_sgrowsiz amount to grow stack
These can be set on a per-arch basis, and the stack size can be set
on the command line. Adjust the stack size parameters at startup.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Target specific values for vm parameters and details.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit platforms, pass in up to 256k of args. For 64-bit, bump that
to 512k.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Include more header files to match bsd-user fork.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update target_arch_elf.h to remove thread_init. Move its contents to
target_arch_thread.h and rename to target_thread_init(). Update
elfload.c to call it. Create thread_os_thread.h to hold the os specific
parts of the thread and threat manipulation routines. Currently, it just
includes target_arch_thread.h. target_arch_thread.h contains the at the
moment unused target_thread_set_upcall which will be used in the future
when creating actual thread (i386 has this stubbed, but other
architectures in the bsd-user tree have real ones). FreeBSD doesn't do
AT_HWCAP, so remove that code. Linux does, and this code came from there.
These changes are all interrelated and could be brokend down, but seem
to represent a reviewable changeset since most of the change is boiler
plate.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Move cpu_loop() into target_cpu_loop(), and put that in
target_arch_cpu.h for each architecture.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the CPU functions into target_arch_cpu.c that are unique to each
CPU. These are defined in target_arch.h.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Save the path to the qemu emulator. This will be used later when we have
a more complete implementation of exec.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Include host-os.h from main.c to pick up the default OS to emulate. Set
that default in main().
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Host OS specific bits for this implementation go in this file.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
All compilers for some time have supported this. Follow linux-user and
eliminate the #define THREAD and unconditionally insert __thread where
needed. Please insert: "(see 24cb36a61c: "configure: Make NPTL
non-optional")"
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reduce the number of ifdefs by always calling the swapping routine, but
making them empty when swapping isn't needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Remove still-born a.out support. The BSDs switched from a.out to ELF 20+ years
ago. It's out of scope for bsd-user, and what little support there was would
simply wind up at a not-implemented message. Simplify the whole mess by removing
it entirely. Should future support be required, it would be better to start from
scratch.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The linux kernel supports a number of different ELF binaries. The Linux userland
emulator inheritted some of that. And we inheritted it from there. However, for
BSD there's only one kind of ELF file supported per platform, so there's no need
to cope with historical quirks. Simply the code as a result.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Use the PATH to find the executable given a bare argument. We need to do
this so we can implement mixing native and emulated binaries (e.g.,
execing a x86 native binary from an emulated arm binary to optimize
parts of the build). By finding the binary, we will know how to exec it.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It was incorrect to subtract off the size of an unsigned int here. In
bsd-user fork, this change was made when moving the arch specific items
to specific files. The size in BSD that's available for the arguments
does not need a return address subtracted from it.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
