In case of in-kernel memory hot unplug, when the guest is not able
to remove all the LMBs that are requested for removal, it will add back
any LMBs that have been successfully removed. The DR Connectors of
these LMBs wouldn't have been unconfigured and hence the addition of
these LMBs will result in configure-connector call being issued on
LMB DR connectors that are already in configured state. Such
configure-connector calls will fail resulting in a DIMM which is
partially unplugged.
This however worked till recently before we overhauled the DRC
implementation in QEMU. Commit 9d4c0f4f0a: "spapr: Consolidate
DRC state variables" is the first commit where this problem shows up
as per git bisect.
Ideally guest shouldn't be issuing configure-connector call on an
already configured DR connector. However for now, work around this in
QEMU by allowing configure-connector to be called multiple times for
all types of DR connectors.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Corrected buglet that would have initialized fdt pointers ready
for reading on a device not present at reset]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running in KVM PR mode, kvmppc_set_compat() always fail because the
current PR implementation doesn't handle KVM_REG_PPC_ARCH_COMPAT. Now that
the machine code inconditionally calls ppc_set_compat_all() at reset time
to restore the compat mode default value (commit 66d5c492dd), it is
impossible to start a guest with PR:
qemu-system-ppc64: Unable to set CPU compatibility mode in KVM:
Invalid argument
A tentative patch [1] was recently sent by Suraj to address the issue, but
it would prevent the compat mode to be turned off on reset. And we really
don't want to explicitely check for KVM PR. During the patch's review,
David suggested that we should only call the KVM ioctl() if the compat
PVR changes. This allows at least to run with KVM PR, provided no compat
mode is requested from the command line (which should be the case when
running PR nested). This is what this patch does.
While here, we also fix the side effect where KVM would fail but we would
change the CPU state in QEMU anyway.
[1] http://patchwork.ozlabs.org/patch/782039/
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit d5fc133eed ("ppc: Rework CPU compatibility testing
across migration") changed the way cpu_post_load behaves with
the PVR setting, causing an unexpected bug in KVM-HV migrations
between hosts that are compatible (POWER8 and POWER8E, for example).
Even with pvr_match() returning true, the guest freezes right after
cpu_post_load. The reason is that the guest kernel can't handle a
different PVR value other that the running host in KVM_SET_SREGS.
In [1] it was discussed the possibility of a new KVM capability
that would indicate that the guest kernel can handle a different
PVR in KVM_SET_SREGS. Even if such feature is implemented, there is
still the problem with older kernels that will not have this capability
and will fail to migrate.
This patch implements a workaround for that scenario. If running
with KVM, check if the guest kernel does not have the capability
(named here as 'cap_ppc_pvr_compat'). If it doesn't, calls
kvmppc_is_pr() to see if the guest is running in KVM-HV. If all this
happens, set env->spr[SPR_PVR] to the same value as the current
host PVR. This ensures that we allow migrations with 'close enough'
PVRs to still work in KVM-HV but also makes the code ready for
this new KVM capability when it is done.
A new function called 'kvmppc_pvr_workaround_required' was created
to encapsulate the conditions said above and to avoid calling too
many kvm.c internals inside cpu_post_load.
[1] https://lists.gnu.org/archive/html/qemu-ppc/2017-06/msg00503.html
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
[dwg: Fix for the case of using TCG on a PPC host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prefer to use the tcg accelarator if it is available: This is our only
real smoke test for tcg, and fast enough to use it for that.
Fixes: 480bc11e6 ("boot-serial-test: fallback to kvm accelerator")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The mmio-interface device is not something we want to allow
users to create on the command line:
* it is intended as an implementation detail of the memory
subsystem, which gets created and deleted by that
subsystem on demand; it makes no sense to create it
by hand on the command line
* it uses a pointer property 'host_ptr' which can't be
set on the command line
Mark the device as not user_creatable to avoid confusion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1502807418-9994-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Thomas Huth <thuth@redhat.com>
According to the ARM ARM exclusive loads require the same alignment as
exclusive stores. Let's update the memops used for the load to match
that of the store. This adds the alignment requirement to the memops.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170815145714.17635-4-richard.henderson@linaro.org
[rth: Require 16-byte alignment for 64-bit LDXP.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are not providing the required single-copy atomic semantics for
the 64-bit operation that is the 32-bit paired load.
At the same time, leave the entire 64-bit value in cpu_exclusive_val
and stop writing to cpu_exclusive_high. This means that we do not
have to re-assemble the 64-bit quantity when it comes time to store.
At the same time, drop a redundant temporary and perform all loads
directly into the cpu_exclusive_* globals.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170815145714.17635-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we perform the atomic_cmpxchg operation we want to perform the
operation on a pair of 32-bit registers. Previously we were just passing
the register size in which was set to MO_32. This would result in the
high register to be ignored. To fix this issue we hardcode the size to
be 64-bits long when operating on 32-bit pairs.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Portia Stephens <portia.stephens@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170815145714.17635-2-richard.henderson@linaro.org
Message-Id: <bc18dddca56e8c2ea4a3def48d33ceb5d21d1fff.1502488636.git.alistair.francis@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we switched NBD to use coroutines for qemu 2.9 (in particular,
commit a12a712a), we introduced a regression: if a server sends us
garbage (such as a corrupted magic number), we quit the read loop
but do not stop sending further queued commands, resulting in the
client hanging when it never reads the response to those additional
commands. In qemu 2.8, we properly detected that the server is no
longer reliable, and cancelled all existing pending commands with
EIO, then tore down the socket so that all further command attempts
get EPIPE.
Restore the proper behavior of quitting (almost) all communication
with a broken server: Once we know we are out of sync or otherwise
can't trust the server, we must assume that any further incoming
data is unreliable and therefore end all pending commands with EIO,
and quit trying to send any further commands. As an exception, we
still (try to) send NBD_CMD_DISC to let the server know we are going
away (in part, because it is easier to do that than to further
refactor nbd_teardown_connection, and in part because it is the
only command where we do not have to wait for a reply).
Based on a patch by Vladimir Sementsov-Ogievskiy.
A malicious server can be created with the following hack,
followed by setting NBD_SERVER_DEBUG to a non-zero value in the
environment when running qemu-nbd:
| --- a/nbd/server.c
| +++ b/nbd/server.c
| @@ -919,6 +919,17 @@ static int nbd_send_reply(QIOChannel *ioc, NBDReply *reply, Error **errp)
| stl_be_p(buf + 4, reply->error);
| stq_be_p(buf + 8, reply->handle);
|
| + static int debug;
| + static int count;
| + if (!count++) {
| + const char *str = getenv("NBD_SERVER_DEBUG");
| + if (str) {
| + debug = atoi(str);
| + }
| + }
| + if (debug && !(count % debug)) {
| + buf[0] = 0;
| + }
| return nbd_write(ioc, buf, sizeof(buf), errp);
| }
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170814213426.24681-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
As in the case of nbd_export_new(), bdrv_invalidate_cache() can be
called when migration is still in progress. In this case we are not
ready to tighten the shared permissions fenced by blk->disable_perm.
Defer to a VM state change handler.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170815130740.31229-4-famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The "inactive" state of BDS affects whether the permissions can be
granted, we must call bdrv_invalidate_cache before bdrv_set_perm to
support "-incoming defer" case.
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170815130740.31229-3-famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
They will be used by BlockBackend code in block-obj-y, which doesn't
always get linked with common-obj-y. Add stubs to keep ld happy.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170815130740.31229-2-famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The 093 throttling test submits twice as many requests as the throttle
limit in order to ensure that we reach the limit. The remaining
requests are left in-flight at the end of each test iteration.
Commit 452589b6b4 ("vl.c/exit: pause cpus
before closing block devices") exposed a hang in 093. This happens
because requests are still in flight when QEMU terminates but
QEMU_CLOCK_VIRTUAL time is frozen. bdrv_drain_all() hangs forever since
throttled requests cannot complete.
Step the clock at the end of each test iteration so in-flight requests
actually finish. This solves the hang and is cleaner than leaving tests
in-flight.
Note that this could also be "fixed" by disabling throttling when drives
are closed in QEMU. That approach has two issues:
1. We must drain requests before disabling throttling, so the hang
cannot be easily avoided!
2. Any time QEMU disables throttling internally there is a chance that
malicious users can abuse the code path to bypass throttling limits.
Therefore it makes more sense to fix the test case than to modify QEMU.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170815130502.8736-1-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
NBD_CMD_DISC is a disconnect request, not a data discard request.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170811015749.20365-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The simpletrace.py script can pretty-print flight recorder ring buffers.
These are not full simpletrace binary trace files but just the end of a
trace file. There is no header and the event ID mapping information is
often unavailable since the ring buffer may have filled up and discarded
event ID mapping records.
The simpletrace.stp script that generates ring buffer traces uses the
same trace-events-all input file as simpletrace.py. Therefore both
scripts have the same global ordering of trace events. A dynamic event
ID mapping isn't necessary: just use the trace-events-all file as the
reference for how event IDs are numbered.
It is now possible to analyze simpletrace.stp ring buffers again using:
$ ./simpletrace.py trace-events-all path/to/ring-buffer
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170815084430.7128-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a partial revert of commit
7f1b588f20 ("trace: emit name <-> ID
mapping in simpletrace header"), which broke the SystemTap flight
recorder because event mapping records may not be present in the ring
buffer when the trace is analyzed. This means simpletrace.py
--no-header does not know the event ID mapping needed to pretty-print
the trace.
Instead of numbering events dynamically, use a static event ID mapping
as dictated by the event order in the trace-events-all file.
The simpletrace.py script also uses trace-events-all so the next patch
will fix the simpletrace.py --no-header option to take advantage of this
knowledge.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170815084430.7128-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
iQFEBAABCAAuFiEEUAN8t5cGD3bwIa1WyjViTGqRccYFAlmS0fwQHGZhbXpAcmVk
aGF0LmNvbQAKCRDKNWJMapFxxpmuB/94sfeSRzzyELILrZHXWPMfADO8MU0jlZRz
+h6pJ3z0ebRgOdpXYie8Aq9Xrp1eSF7MuZVgbPkMdMqB3tUhNU+yiv05wmUj0eZs
4auFmYc0jLs6BqRflPHq4+DOxZ+KVULWCo8fa8+WhHbLjBlBQpUqBDEI++WEB2O6
ZGLvBaT7XvERHF4DqB8g2VfD0qaMp7Nh/h4EV0eR83S0mn6To8wrl0Gaim8Isyl2
1/Do2jku9eyltcih67ecL/vnUpcQ/2F9pgdhevpOWEWd5ov23pkI6kZr/V6UHL4J
8EHl9mjbkE8tuDCF98KukyNZgPW0SKaArq2J2ADiYTRtWsWnoevQ
=YYke
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/build-and-test-pull-request' into staging
# gpg: Signature made Tue 15 Aug 2017 11:50:36 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/build-and-test-pull-request:
docker: add centos7 image
docker: install more packages on CentOS to extend code coverage
docker: add Xen libs to centos6 image
docker: use one package per line in CentOS config
Makefile: Let "make check-help" work without running ./configure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This ease rebase/cherry-pick, also it is faster to visually find if a package
is here.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170728233316.13352-2-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently if you do "make check-help" in a fresh checkout, only an error
is printed which is not nice:
$ make check-help V=1
cc -nostdlib -o check-help.mo
cc: fatal error: no input files
compilation terminated.
rules.mak:115: recipe for target 'check-help.mo' failed
make: *** [check-help.mo] Error 1
Move the config-host.mak condition into the body of
tests/Makefile.include and always include the rule for check-help.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170810085025.14076-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
This reverts a change that replaced the "rm -f" command with the
undefined variable RM (expected to be set by make), and causes the
"make clean" command to fail for a s390 target:
make[1]: Entering directory '/usr/src/qemu/build/pc-bios/s390-ccw'
rm -f *.timestamp
*.o *.d *.img *.elf *~ *.a
/bin/sh: *.o: command not found
Makefile:39: recipe for target 'clean' failed
make[1]: *** [clean] Error 127
make[1]: Leaving directory '/usr/src/qemu/build/pc-bios/s390-ccw'
Makefile:489: recipe for target 'clean' failed
make: *** [clean] Error 1
Fixes: 3e4415a751 ("pc-bios/s390-ccw: Add core files for the network
bootloading program")
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170814204450.24118-2-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This adds mmio-exec property to workaround the migration bug.
When enabled the migration is blocked and will return an error.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1502438052-5117-1-git-send-email-frederic.konrad@adacore.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJZkZhKAAoJEO8Ells5jWIR8GAIAIebmE5pXT1zSoAiJpnV+Y2h
H07JnAlFVmCKJt2xZDmkEVPA3mmvt1afSCXSwa7T1cqgmJHqfdMf147hghmTcwXz
lfhdgnoqwlWXFRE5M9mi1d6WXiZAW3i3GBVOcItIe4BHVA+1lq0J05q02I66a9OX
teLvBY4XHzQO1a7ogaRwyLlfVW0y7t4Nqz/TfZLvAAHyb60AbEF9WXAAmMRMiyTS
sRSd+vqFTc+T99YRSM/x6gbLUGZdN6Wxx1rzyvZC/NczGtrsxV601f+TG69wXuVK
6qykwkGwlTtdJxSyOfhTFuaVQCPvCGcVF1lp1HI6b5t0BK5d77pS+9WfQmDGPyI=
=CyY7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 14 Aug 2017 13:32:10 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
qemu-doc: Mention host_net_add/-remove in the deprecation chapter
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The two HMP commands host_net_add and -remove have recently been
marked as deprecated, too, so we should now mention them in the
chapter of deprecated features.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QEMU currently abort()s if the user tries to specify the mmio_interface
device without parameters:
x86_64-softmmu/qemu-system-x86_64 -nographic -device mmio_interface
qemu-system-x86_64: /home/thuth/devel/qemu/util/error.c:57: error_setv:
Assertion `*errp == ((void *)0)' failed.
Aborted (core dumped)
This happens because the realize function is trying to set the errp
twice in this case. After setting an error, the realize function
should immediately return instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The check script contains a commented out root user requirement,
probably because of its xfstests heritage. This requirement doesn't
apply to qemu-iotests, so it better be gone.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The variables FULL_MKFS_OPTIONS and FULL_MOUNT_OPTIONS are commented
out, never used, and even refer to functions that do exist. The last
time these were touched was around 8 years ago, so I guess it's safe
to assume outputting such information on test execution is still on the
radar.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Although this function is used, its implementation does nothing
besides echoing a variable name. There's no need to wrap this
functionality in a function, and based on the one usage it has, it's
not even required to adhere to a convention or code style.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While Andrew S. Tanenbaum has a point by saying "Never underestimate the
bandwidth of a station wagon full of tapes hurtling down the highway",
we don't support that way of transportation in QEMU yet, so replace the
typo with the correct word "vlan".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
s/continuosly/continuously/
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While Andrew S. Tanenbaum has a point by saying "Never underestimate the
bandwidth of a station wagon full of tapes hurtling down the highway",
we don't support that way of transportation in QEMU yet, so replace the
typo with the correct word "vlan".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1502365466-19432-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, at least x86_64 and s390x support building with --disable-tcg.
Instead of forcing tcg (which causes the test to fail on such builds),
allow to use kvm as well.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
185 can sometimes produce wrong output like this:
185 2s ... - output mismatch (see 185.out.bad)
--- /work/src/qemu/master/tests/qemu-iotests/185.out 2017-07-14 \
15:14:29.520343805 +0300
+++ 185.out.bad 2017-08-07 16:51:02.231922900 +0300
@@ -37,7 +37,7 @@
{"return": {}}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", \
"len": 4194304, "offset": 4194304, "speed": 65536, "type": \
"mirror"}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", \
"len": 0, "offset": 0, "speed": 65536, "type": "mirror"}}
=== Start backup job and exit qemu ===
Failures: 185
Failed 1 of 1 tests
This is because, under heavy load, the quit can happen before the first
iteration of the mirror request has occurred. To make sure we've had
time to iterate, let's just add a sleep for 0.5 seconds before quitting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is reported that on Windows Subsystem for Linux, ofd operations fail
with -EINVAL. In other words, QEMU binary built with system headers that
exports F_OFD_SETLK doesn't necessarily run in an environment that
actually supports it:
$ qemu-system-aarch64 ... -drive file=test.vhdx,if=none,id=hd0 \
-device virtio-blk-pci,drive=hd0
qemu-system-aarch64: -drive file=test.vhdx,if=none,id=hd0: Failed to unlock byte 100
qemu-system-aarch64: -drive file=test.vhdx,if=none,id=hd0: Failed to unlock byte 100
qemu-system-aarch64: -drive file=test.vhdx,if=none,id=hd0: Failed to lock byte 100
As a matter of fact this is not WSL specific. It can happen when running
a QEMU compiled against a newer glibc on an older kernel, such as in
a containerized environment.
Let's do a runtime check to cope with that.
Reported-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Build time check of OFD lock is not sufficient and can cause image open
errors when the runtime environment doesn't support it.
Add a helper function to probe it at runtime, additionally. Also provide
a qemu_has_ofd_lock() for callers to check the status.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_co_pwritev_compressed() should not call bdrv_truncate()
if determining the size failed.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's been #if 0'd since its introduction in 2006, commit 585f8587.
We can revive dead code if we need it, but in the meantime, it has
bit-rotted (for example, not checking for failure in bdrv_getlength()).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
