The monitor support for disassembling instructions does not honor the MSR[LE]
bit for PowerPC processors.
This change enhances the monitor_disas() routine by supporting a flag bit
for Little Endian mode. Bit 16 is used since that bit was used in the
analagous guest disassembly routine target_disas().
Also, to be consistent with target_disas(), the disassembler bfd_mach field
can be passed in the flags argument.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Inspect only bit 16 for the Little Endian test. Correct comment preceding
the target_disas() function. Correct grammar in comment for flags processing.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
if a saved vm has unknown flags in the memory data qemu
currently simply ignores this flag and continues which
yields in an unpredictable result.
This patch catches all unknown flags and aborts the
loading of the vm. Additionally error reports are thrown
if the migration aborts abnormally.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If the networking break or there's something wrong with rdma
device(ib0 with no IP) during rdma migration, the main_loop of
qemu will be blocked in rdma_destroy_id. I add rdma_ack_cm_event
to fix this bug.
Signed-off-by: Mo Yuxiang <Moyuxiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The existing timeout is 30ms which on 100MB/s (1Gbit) gives us
3MB/s rate maximum. If we put some load on the guest, it is easy to
get page dirtying rate too big so live migration will never complete.
In the case of libvirt that means that the guest will be stopped
anyway after a timeout specified in the "virsh migrate" command and
this normally generates even bigger delay.
This changes max_downtime to 300ms which seems to be more
reasonable value.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Don't use atoi() function which doesn't detect errors, switch to
strtol and error out on failures. Also add a range check while
being at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
So you'll have a mouse pointer when running non-qxl gfx cards with
mouse pointer support (virtio-gpu, IIRC vmware too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When trying to use a ivshmem server with qemu, ivshmem init code tries to
create a CharDriverState object for each eventfd retrieved from the server.
To create this object, a call to qemu_chr_open_eventfd() is done.
Right after this, before adding a frontend, qemu_chr_fe_claim_no_fail() is
called.
qemu_chr_open_eventfd() does not set avail_connections to 1, so no frontend can
be associated because qemu_chr_fe_claim_no_fail() makes qemu stop right away.
This problem comes from 456d606923
"qemu-char: Call fe_claim / fe_release when not using qdev chr properties".
Fix this, by setting avail_connections to 1 in qemu_chr_open_eventfd().
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* build fixes
* improvements to strace
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=yKuf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-bsd-user-20140611' into staging
bsd-user queue:
* build fixes
* improvements to strace
# gpg: Signature made Wed 11 Jun 2014 15:23:40 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-bsd-user-20140611:
bsd-user: Fix syscall format, add strace support for more syscalls
bsd-user: Implement strace support for thr_* syscalls
bsd-user: Implement strace support for extattr_* syscalls
bsd-user: Implement strace support for __acl_* syscalls
bsd-user: Implement strace support for print_ioctl syscall
bsd-user: Implement strace support for print_sysctl syscall
bsd-user: GPL v2 attribution update and style
bsd-user: add HOST_VARIANT_DIR for various *BSD dependent code
exec: replace ffsl with ctzl
vhost: replace ffsl with ctzl
xen: replace ffsl with ctzl
util/qemu-openpty: fix build with musl libc by include termios.h as fallback
bsd-user/mmap.c: Don't try to override g_malloc/g_free
util/hbitmap.c: Use ctpopl rather than reimplementing a local equivalent
bsd-user: refresh freebsd system call numbers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
rules.mak: Rewrite unnest-vars
configure: unset interfering variables
configure: duplicate/incorrect order of -lrt
libcacard: improve documentation
libcacard: actually use symbols file
libcacard: replace qemu thread primitives with glib ones
vscclient: use glib thread primitives not qemu
glib-compat.h: add new thread API emulation on top of pre-2.31 API
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Relies on readline unique completion strings patch to make the added vlan/hub
completion values unique, instead of using something like a hash table.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There is no need to clutter the user's choices with repeating the same value
multiple times.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Export chr_is_ringbuf() function. Also remove left-over function prototypes
while at it.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We can (and should) rely on the fact that s->flag_compress is exactly one
of DUMP_DH_COMPRESSED_ZLIB, DUMP_DH_COMPRESSED_LZO, and
DUMP_DH_COMPRESSED_SNAPPY.
This is ensured by the QMP schema and dump_init() in combination.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qmp_dump_guest_memory()
dump_init()
lzo_init() <---------+
create_kdump_vmcore() |
write_dump_pages() |
get_len_buf_out() |
lzo_init() ------+
This patch doesn't change the fact that lzo_init() is called for every
LZO-compressed dump, but it makes get_len_buf_out() more focused (single
responsibility).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The specific ELF architecture (d_machine) carries Too Much Information
(TM) for deciding between create_header32() and create_header64(), use
"d_class" instead (ELFCLASS32 vs. ELFCLASS64).
This change adapts write_dump_header() to write_elf_loads(), dump_begin()
etc. that also rely on the ELF class of the target for bitness selection.
Considering the current targets that support dumping, cpu_get_dump_info()
works as follows:
- target-s390x/arch_dump.c: (EM_S390, ELFCLASS64) only
- target-ppc/arch_dump.c (EM_PPC64, ELFCLASS64) only
- target-i386/arch_dump.c: sets (EM_X86_64, ELFCLASS64) vs. (EM_386,
ELFCLASS32) keying off the same Long Mode Active flag.
Hence no observable change.
Approximately-suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Use TARGET_PAGE_SIZE and ~TARGET_PAGE_MASK instead.
"DumpState.page_size" has type "size_t", whereas TARGET_PAGE_SIZE has type
"int". TARGET_PAGE_MASK is of type "int" and has negative value. The patch
affects the implicit type conversions as follows:
- create_header32() and create_header64(): assigned to "block_size", which
has type "uint32_t". No change.
- get_next_page(): "block->target_start", "block->target_end" and "addr"
have type "hwaddr" (uint64_t).
Before the patch,
- if "size_t" was "uint64_t", then no additional conversion was done as
part of the usual arithmetic conversions,
- If "size_t" was "uint32_t", then it was widened to uint64_t as part of
the usual arithmetic conversions,
for the remainder and addition operators.
After the patch,
- "~TARGET_PAGE_MASK" expands to ~~((1 << TARGET_PAGE_BITS) - 1). It
has type "int" and positive value (only least significant bits set).
That's converted (widened) to "uint64_t" for the bit-ands. No visible
change.
- The same holds for the (addr + TARGET_PAGE_SIZE) addition.
- write_dump_pages():
- TARGET_PAGE_SIZE passed as argument to a bunch of functions that all
have prototypes. No change.
- When incrementing "offset_data" (of type "off_t"): given that we never
build for ILP32_OFF32 (see "-D_FILE_OFFSET_BITS=64" in configure),
"off_t" is always "int64_t", and we only need to consider:
- ILP32_OFFBIG: "size_t" is "uint32_t".
- before: int64_t += uint32_t. Page size converted to int64_t for
the addition.
- after: int64_t += int32_t. No change.
- LP64_OFF64: "size_t" is "uint64_t".
- before: int64_t += uint64_t. Offset converted to uint64_t for the
addition, then the uint64_t result is converted to int64_t for
storage.
- after: int64_t += int32_t. Same as the ILP32_OFFBIG/after case.
No visible change.
- (size_out < s->page_size) comparisons, and (size_out = s->page_size)
assignment:
- before: "size_out" is of type "size_t", no implicit conversion for
either operator.
- after: TARGET_PAGE_SIZE (of type "int" and positive value) is
converted to "size_t" (for the relop because the latter is
one of "uint32_t" and "uint64_t"). No visible change.
- dump_init():
- DIV_ROUND_UP(DIV_ROUND_UP(s->max_mapnr, CHAR_BIT), s->page_size): The
innermost "DumpState.max_mapnr" field has type uint64_t, which
propagates through all implicit conversions at hand:
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
regardless of the page size macro argument's type. In the outer macro
replacement, the page size is converted from uint32_t and int32_t
alike to uint64_t.
- (tmp * s->page_size) multiplication: "tmp" has size "uint64_t"; the
RHS is converted to that type from uint32_t and int32_t just the same
if it's not uint64_t to begin with.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Just use TARGET_PAGE_BITS.
"DumpState.page_shift" used to have type "uint32_t", while the replacement
TARGET_PAGE_BITS has type "int". Since "DumpState.page_shift" was only
used as bit shift counts in the paddr_to_pfn() and pfn_to_paddr() macros,
this is safe.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Currently, the function
- defines and populates an auto variable of type MakedumpfileHeader
- allocates and zeroes a buffer of size MAX_SIZE_MDF_HEADER (4096)
- copies the former into the latter (covering an initial portion of the
latter)
Fill in the MakedumpfileHeader structure in its final place (the alignment
is OK because the structure lives at the address returned by g_malloc0()).
Approximately-suggested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The "mh.signature" array field has size 16, and is zeroed by the preceding
memset(). MAKEDUMPFILE_SIGNATURE expands to a string literal with string
length 12 (size 13). There's no need to measure the length of
MAKEDUMPFILE_SIGNATURE at runtime, nor for the extra zero-filling of
"mh.signature" with strncpy().
Use memcpy() with MIN(sizeof, sizeof) for robustness (which is an integer
constant expression, evaluable at compile time.)
Approximately-suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make configure detect gtk x11 backend and link libX11 then. Make
gtk backend specific code properly #ifdef'ed on the GTK_WINDOWING_*
backends at runtime). Our gtk ui code should build and run fine on
any platform now.
This also fixes the linker failute due to the new XkbGetKeyboard call
added by commit 3158a3482b.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
