Load and save MTRR state together with machine state.
Add support for the MTRRcap MSR which is used by the latest Bochs BIOS
and some operating systems.
Fix a typo in ext2_feature_name.
With this patch, MTRR emulation should be good enough to not trigger any
sanity checks in well behaved BIOS/kernel code.
Some corner cases for BIOS/firmware usage remain to be implemented, but
that can be deferred to another patch.
Also, MTRR accesses on hardware not supporting MTRRs should cause #GP.
That can be enforced by another patch as well.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6472 c046a42c-6fe2-441c-8c8c-71466251a162
Current Linux guests oops if the host notifies of a
config change before a driver has been bound to the
device.
It's pretty pointless for us to do notify of config
changes before status is S_DRIVER_OK anyway, so let's
just not do it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6471 c046a42c-6fe2-441c-8c8c-71466251a162
Currently when qemu_paio_read or qemu_paio_write return an error we call
qemu_aio_release without removing the request from the list.
I know that in the current implementation qemu_paio_write\read don't return
any error, but still the behavior is wrong, especially considering
that the implementation of these two functions is likely to change in is
the future.
This patch fixes the problem adding a raw_aio_remove function that
removes the callback from the queue and also calls qemu_aio_release.
raw_aio_remove is called by raw_aio_read, raw_aio_write and
raw_aio_cancel.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6470 c046a42c-6fe2-441c-8c8c-71466251a162
Paul Brook pointed out that the number of sectors reported
by the SCSI read capacity commands needs to be divided by
s->cluster_size, because bdrv_get_geometry reports the number
of 512 byte sectors, while emulated CDROMs report 2048 byte
sectors back to the guest.
This has no consequences for emulated hard disks, which use
a cluster size of 1.
aliguori: fixed typo
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6469 c046a42c-6fe2-441c-8c8c-71466251a162
Implement SCSI READ(16), WRITE(16) and SAI READ CAPACITY(16) commands,
so SCSI disks larger than 2TB can work with guests that support these
newer SCSI commands.
The cast to (uint64_t) is needed because otherwise gcc will use a
signed int, which gets sign extended into uint64_t lba, resulting
in bad block numbers for READ 10 and READ 16 with block numbers
larger than 2^31.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6468 c046a42c-6fe2-441c-8c8c-71466251a162
Sector numbers can overflow on a virtual scsi disk of over 1TB
in size. Qemu's bdrv_read expects an int64_t, so fix the overflow
by going to that data type.
On large disks, we clip the capacity to 2TB instead of returning
"capacity modulo 2TB".
Turn sector_count into an unsigned to prevent a signed/unsigned
overflow with SCSI transfers larger than 2TB. We're unlikely to
ever hit this bug, but fixing it is just one line.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6467 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes the truncation of sector offsets to 32 bits.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6464 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6463 c046a42c-6fe2-441c-8c8c-71466251a162
Apparently this board was forgotten in the display changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6462 c046a42c-6fe2-441c-8c8c-71466251a162
It seems that the conversion of the kernel-delivered eflags state into
qemu's internal split representation was once needed in an older kvm
design (register read-back may have taken place from inside cpu_exec).
Today it is plain wrong and causes incorrect cpu state reporting (gdb,
monitor) and should also corrupt its saving (savevm, migration). Drop
the related lines.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6461 c046a42c-6fe2-441c-8c8c-71466251a162
The HPET emulation can disable the i8254 when the HPET is
in legacy mode, thus emulating the i8254's behavior.
But if it does, the i8254 doesn't have to be running, so
let's check to see if the timer works and not disable it
if it's not.
This fixes a segmentation fault when running Mac OS X as
guest os.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6460 c046a42c-6fe2-441c-8c8c-71466251a162
Add an implementation to create VHD images.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6459 c046a42c-6fe2-441c-8c8c-71466251a162
Add write support for VHD images.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6458 c046a42c-6fe2-441c-8c8c-71466251a162
Instead of accessing the file directly, use the qemu block layer.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6457 c046a42c-6fe2-441c-8c8c-71466251a162
VirtualPC bases the virtual disk size on the geometry rather than on
the size stored in the header.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6456 c046a42c-6fe2-441c-8c8c-71466251a162
The current definition of the VirtualPC headers is incomplete and partly
even wrong. This patch changes the header structs according to the
official VHD specification.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6455 c046a42c-6fe2-441c-8c8c-71466251a162
struct vpc_subheader currently is a union of two completely different
data structures (the Hard Disk Footer and the Dynamic Disk Header).
That doesn't make too much sense, so split them up.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6454 c046a42c-6fe2-441c-8c8c-71466251a162
As discussed a few times on this list: A triple fault causes a system
reset on x86, and some guests make use of this (e.g. 386BSD). To keep
the chance of tracing unexpected resets, log them if CPU_LOG_RESET is
set.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6453 c046a42c-6fe2-441c-8c8c-71466251a162
Original idea&code by Kevin Wolf, split-up in two patches and added more
archs.
This patch introduces a flag to log CPU resets. Useful for tracing
unexpected resets (such as those triggered by x86 triple faults).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6452 c046a42c-6fe2-441c-8c8c-71466251a162
According to the FSF, the 4-clause BSD license, which slirp is covered under,
is not compatible with the GPL or LGPL[1].
[1] http://www.fsf.org/licensing/licenses/index_html#GPLIncompatibleLicenses
There are three declared copyright holders in slirp that use the 4-clause
BSD license, the Regents of UC Berkley, Danny Gasparovski, and Kelly Price.
Below are the appropriate permissions to remove the advertise clause from slirp
from each party.
Special thanks go to Richard Fontana from Red Hat for contacting all of the
necessary authors to resolve this issue!
Regents of UC Berkley:
From ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change
July 22, 1999
To All Licensees, Distributors of Any Version of BSD:
As you know, certain of the Berkeley Software Distribution ("BSD") source
code files require that further distributions of products containing all or
portions of the software, acknowledge within their advertising materials
that such products contain software developed by UC Berkeley and its
contributors.
Specifically, the provision reads:
" * 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors."
Effective immediately, licensees and distributors are no longer required to
include the acknowledgement within advertising materials. Accordingly, the
foregoing paragraph of those BSD Unix files containing it is hereby deleted
in its entirety.
William Hoskins
Director, Office of Technology Licensing
University of California, Berkeley
Danny Gasparovski:
Subject: RE: Slirp license
Date: Thu, 8 Jan 2009 10:51:00 +1100
From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au>
To: "Richard Fontana" <rfontana@redhat.com>
Hi Richard,
I have no objection to having Slirp code in QEMU be licensed under the
3-clause BSD license.
Thanks for taking the effort to consult me about this.
Dan ...
Kelly Price:
Date: Thu, 8 Jan 2009 19:38:56 -0500
From: "Kelly Price" <strredwolf@gmail.com>
To: "Richard Fontana" <rfontana@redhat.com>
Subject: Re: Slirp license
Thanks for contacting me, Richard. I'm glad you were able to find
Dan, as I've been "keeping the light on" for Slirp. I have no use for
it now, and I have little time for it (now holding onto Keenspot's
Comic Genesis and having a regular US state government position). If
Dan would like to return to the project, I'd love to give it back to
him.
As for copyright, I don't own all of it. Dan does, so I will defer to
him. Any of my patches I will gladly license to the 3-part BSD
license. My interest in re-licensing was because we didn't have ready
info to contact Dan. If Dan would like to port Slirp back out of
QEMU, a lot of us 64-bit users would be grateful.
Feel free to share this email address with Dan. I will be glad to
effect a transfer of the project to him and Mr. Bellard of the QEMU
project.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6451 c046a42c-6fe2-441c-8c8c-71466251a162
The current codebase ignores MTRR (Memory Type Range Register)
configuration writes and reads because Qemu does not implement caching.
All BIOS/firmware in know of for x86 do implement a mode called
Cache-as-RAM (CAR) which locks down the CPU cache lines and uses the CPU
cache like RAM before RAM is enabled. Qemu assumes RAM is accessible
from the start, but it would be nice to be able to run real
BIOS/firmware in Qemu. For that, we need CAR support and for CAR support
we have to support MTRRs.
This patch is a first step in that direction. MTRRs are MSRs supported
by all recent x86 CPUs, even old i586. Besides influencing cache, the
MTRRs can be written and read back, so discarding MTRR writes violates
the expectations of existing code out there.
An added benefit of this patch is that it fixes the following Linux
kernel error message present in recent kernels (provided the BIOS has
the recent MTRR patches applied):
------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1500 mtrr_trim_uncached_memory+0x382/0x384()
WARNING: strange, CPU MTRRs all blank?
Modules linked in:
Supported: Yes
Pid: 0, comm: swapper Not tainted 2.6.27.7-9-default #1
[<c0106570>] dump_trace+0x6b/0x249
[<c01070a5>] show_trace+0x20/0x39
[<c0343c02>] dump_stack+0x71/0x76
[<c012acb2>] warn_slowpath+0x6f/0x90
[<c0542f8f>] mtrr_trim_uncached_memory+0x382/0x384
[<c053f24d>] setup_arch+0x40d/0x639
[<c053a6ac>] start_kernel+0x6b/0x31f
=======================
---[ end trace 4eaa2a86a8e2da22 ]---
Handle common x86 MTRR reads and writes, but don't act on them.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6449 c046a42c-6fe2-441c-8c8c-71466251a162
Derived from Stuart Brady's patch: Show the target directory as prefix
to the current module when building in quiet mode. This helps to gain
overview of the current build progress, specifically when running
parallelized builds.
Furthermore, suppress make command echoing when entering subdirs and
replace $(subst subdir-,,$@) with $* in the related rule.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6447 c046a42c-6fe2-441c-8c8c-71466251a162
This fixes the warning:
/scratch/froydnj/qemu.git/hw/vga.c:1515: warning: redundant redeclaration of 'rgb_to_pixel_dup_table'
/scratch/froydnj/qemu.git/hw/vga.c:1248: warning: previous declaration of 'rgb_to_pixel_dup_table' was here
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6446 c046a42c-6fe2-441c-8c8c-71466251a162
Should solve 100% cpu ioport poll after reboot.
Signed-off-by: Dor Laor <dor@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6445 c046a42c-6fe2-441c-8c8c-71466251a162
If link is down, pretend that the packet has been successfully sent.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6444 c046a42c-6fe2-441c-8c8c-71466251a162
Mac OS X 10.5 supports 64-bit userspace on an x86_64 kernel and
by default uses 32-bit userspace applications, so the detection for
the host architecture fails.
This patch enabled building of x86_64 code on x86_64 capable CPUS
with Mac OS X.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6443 c046a42c-6fe2-441c-8c8c-71466251a162
This patch defines PCI vendor and device IDs in pci.h (matching those
from Linux's pci_ids.h), and uses those definitions where appropriate.
Change from v1:
Introduces pci_config_set_vendor_id() / pci_config_set_device_id()
accessors as suggested by Anthony Liguori.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
this patch fixes a bug and improves the generic pixel conversion
function in vnc.c.
The bug is that when a new vnc client connects we need to reset the flag
has_WMVi but currently we don't.
The generic pixel conversion function is vnc_convert_pixel and currently
is not very efficient since uses the division and multiplication
operators.
To make it more efficient I changed to use bit shift operators instead.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6441 c046a42c-6fe2-441c-8c8c-71466251a162
A subsystem vendor ID of zero isn't allowed, so we use our
default ID.
Gerd points out that although the PCI subsystem vendor ID is
treated by the guest as the virtio vendor ID:
/* we use the subsystem vendor/device id as the virtio vendor/device
* id. this allows us to use the same PCI vendor/device id for all
* virtio devices and to identify the particular virtio driver by
* the subsytem ids */
vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
vp_dev->vdev.id.device = pci_dev->subsystem_device;
it looks like only the device ID is used right now:
# grep virtio modules.alias
alias virtio:d00000001v* virtio_net
alias virtio:d00000002v* virtio_blk
alias virtio:d00000003v* virtio_console
alias virtio:d00000004v* virtio-rng
alias virtio:d00000005v* virtio_balloon
alias pci:v00001AF4d*sv*sd*bc*sc*i* virtio_pci
alias virtio:d00000009v* 9pnet_virtio
so setting the subsystem vendor id to something != zero shouldn't cause
trouble.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6440 c046a42c-6fe2-441c-8c8c-71466251a162
Also use the existing macro for the PCI vendor ID
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6439 c046a42c-6fe2-441c-8c8c-71466251a162
Gerd added these macros a while back.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6438 c046a42c-6fe2-441c-8c8c-71466251a162
Linux changed its physical address location in the elf header from
0xc0000000 to 0 on 2.6.25, causing later kernels to fail booting
with the -kernel option.
This patch assures that the lowest segment in the elf binary is loaded
to KERNEL_LOAD_ADDR, which is where the firmware expects it.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6437 c046a42c-6fe2-441c-8c8c-71466251a162
Add resource registration both for P4 and A7.
This is needed because of #5935 SH4: Eliminate P4 to A7 mangling.
Additionally, {reg,iop,mem}base which is no longer used are removed.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6433 c046a42c-6fe2-441c-8c8c-71466251a162
Rearrange code, help printout and docs so that they are in the same
(hopefully more logical) order for easier maintenance.
Add help and docs for undocumented options.
Reformat slightly for more consistent help output.
Add comments to encourage better synchronization in the future.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6432 c046a42c-6fe2-441c-8c8c-71466251a162
Windows Vista drops unicast dhcp replies to its yet-unconfigured address,
so use a broadcast address. This behaviour is allowed by the RFC.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6430 c046a42c-6fe2-441c-8c8c-71466251a162
On the MIPS Magnum, the time that is held in the RTC's NVRAM should be
relative to midnight on 1980-01-01. This patch adds an extra parameter
to rtc_init(), allowing different epochs to be used. For the Magnum,
1980 is specified, and for all other machines, 2000 is specified.
I've not modified the handling of the century byte, as with an epoch of
1980 and a year of 2009, one could argue that it should hold either
0, 1, 19 or 20. NT 3.50 on MIPS does not read the century byte.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6429 c046a42c-6fe2-441c-8c8c-71466251a162
As mentioned in:
http://lists.gnu.org/archive/html/qemu-devel/2009-01/msg00907.html
pci-ids.txt needs updating to list the the virtio-console PCI device ID.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6428 c046a42c-6fe2-441c-8c8c-71466251a162
Indent and align the quiet build messages more like Linux - improves
readability of this great feature even more.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6426 c046a42c-6fe2-441c-8c8c-71466251a162
Don't read/write SPEFSCR until we figure out what to do about exceptions.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6425 c046a42c-6fe2-441c-8c8c-71466251a162
