This patch is preliminary for 64 bit BAR support.
Introduce dedicated type, pcibus_t, to represent pci bus address/size
instead of uint32_t.
Later this type will be changed to uint64_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make constants for pci base address match pci_regs.h by
renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Explicitly add the drive to the bus of the newly created scsi adapter
instead of hoping that scsi_bus_legacy_handle_cmdline() picks it up
correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device init
callbacks can't signal failure because the init() callback has no
return value. This patch fixes it.
We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault. This patch fixes it.
With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch requires "Handle BH's queued by AIO completions in
qemu_aio_flush()" to work reliably. The combination of those two
patches survived 300+ migrations with heavy IO load running in the
guest.
Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters. Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This function is used to manage a PCI BAR, so make the more generic
pci_register_io_region() available to other uses.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty). Remove the parameter to reduce
the API's power, thus facilitating future change.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
SLES10 SP2 installer complains when probing a scsi disk and exits qemu
when failing to read one of the registers.
lsi_scsi: error: readb 0x15
--
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
ryanh@us.ibm.com
diffstat output:
lsi53c895a.c | 2 ++
1 files changed, 2 insertions(+)
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
---
Subject: [PATCH] lsi: add ISTAT1 register read
From: Ryan Harper <ryanh@us.ibm.com>
Cc: kvm@vger.kernel.org
SLES10 SP2 installer complains when probing a scsi disk and exits qemu when
failing to read one of the registers.
lsi_scsi: error: readb 0x15
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6688 c046a42c-6fe2-441c-8c8c-71466251a162
Record PCIDev on the BlockDriverState structure to locate for release
on hot-removal.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6597 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds and uses #defines for PCI device classes and subclases,
using a new pci_config_set_class() function, similar to the recently
added pci_config_set_vendor_id() and pci_config_set_device_id().
Change since v1: fixed compilation of hw/sun4u.c
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
This patch defines PCI vendor and device IDs in pci.h (matching those
from Linux's pci_ids.h), and uses those definitions where appropriate.
Change from v1:
Introduces pci_config_set_vendor_id() / pci_config_set_device_id()
accessors as suggested by Anthony Liguori.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
CASE_GET_REG32 is already defined in lsi53c895a.c; introduce CASE_GET_REG24.
(Sebastian Herbszt)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6311 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds support for 64-bit Block Move instructions. There are multiple
modes for 64-bit Block moves, direct, indirect, and table indirect. This patch
implements Direct and Table indirect moves which are needed by 64-bit windows
and SYM_CONF_DMA_ADDRESSING_MODE=2 for the Linux sym53c8xx_2 driver respectively.
Two helper functions are included to check which mode the guest is using. For
64-bit direct moves, we fetch a 3rd DWORD and store the value in the DBMS
register. For Table Indirect moves, we look into the table for which register
contains the upper 32-bits of the 64-bit address. This selector value indicates
which register to pull the value from and into dnad64 register.
Finally, lsi_do_dma is updated to use the approriate register to build a 64-bit
DMA address if required.
With this patch, Windows XP x64, 2003 SP2 x64, can now install to scsi devices.
Linux SYM_CONF_DMA_ADDRESSING_MODE=2 need a quirk fixup in Patch 4 to function
properly.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5969 c046a42c-6fe2-441c-8c8c-71466251a162
Basically after each DMA transfer the Openserver driver would issue an
empty (0) SCRIPTS opcode. As the opcode is essentially a NOP it has no
second DWORD and therefore the DSP should only be incremented by 4 bytes
instead of the 8 bytes we currently do.
Here's a snippet of the log:
lsi_scsi: Data ready tag=0x100d9 len=16384
...
lsi_scsi: SCRIPTS dsp=068c5e50 opcode 01000400 arg 07a09000
lsi_scsi: DMA addr=0x07a09000 len=1024
lsi_scsi: SCRIPTS dsp=068c5e58 opcode 00000000 arg 01000400
lsi_scsi: Wrong phase got 1 expected 0
Note the 2nd DWORD after the empty opcode; the next opcode in the DMA
transfer sequence. As can be expected the address after that has the next
DMA address to use.
After the attached patch the DMA transfer is able to complete successfully:
lsi_scsi: SCRIPTS dsp=068c5e50 opcode 01000400 arg 07a0d000
lsi_scsi: DMA addr=0x07a0d000 len=1024
lsi_scsi: SCRIPTS dsp=068c5e5c opcode 01000400 arg 07a0d400
lsi_scsi: DMA addr=0x07a0d400 len=1024
...
Tested againsted Openserver 5.0.5 and Debian ARM.
Signed-off-by: Justin Chevrier <address@hidden>
Acked-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5902 c046a42c-6fe2-441c-8c8c-71466251a162
TARGET_FMT_plx includes a % for you. This fixes the following warning when
compiling with LSI_DEBUG enabled.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5760 c046a42c-6fe2-441c-8c8c-71466251a162
This patch fixes Linux machines configured with > 4G of ram and using a
SCSI device.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5750 c046a42c-6fe2-441c-8c8c-71466251a162
After going through the debug log and scratching my head for quite some
time. I found the following:
The problem was with this block move:
lsi_scsi: SCRIPTS dsp=0fae8e50 opcode 01000028 arg 00f63c40
lsi_scsi: DMA addr=0x00f63c40 len=36
The number of bytes to be transferred (len) should be 40 which corresponds
to the block transfer of length 0x28 (from opcode 01000028). Instead we
have a length of 36 (0x24). The code responsible for this is (in
'lsi_do_dma'):
if (count > s->current_dma_len)
count = s->current_dma_len;
Basically we're overwriting the length 40 with the value 36 which I
think we just left over in that variable from an earlier transfer. In my
patch below I initialize s->current_dma_len to s->dbc before we begin
the DMA transfer during Data In phase.
The attached patch gets Openserver 5.0.5 past the hardware detection
(and it lists the hard drive to boot, woohoo). It appears to stop a
little while later (doesn't seem SCSI related), but it's been so long since
I've booted Openserver I'm not sure what's supposted to happen after the HW
detection using the boot/root disks.
Props go to Craig Ringer for the initial post and the code that he posted
some of which is in this patch.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5706 c046a42c-6fe2-441c-8c8c-71466251a162
Raise UDC (Unexpected Disconnect) when a large enough number of
instructions has been executed by the SCRIPTS processor. This "solution"
is much simpler than temporarily interrupting execution.
This remedies the situation with Windows which downloads SCRIPTS code
that busy loops on guest main memory. Their drivers _do_ handle UDC
appropriately (at least XP and 2003).
It would be nicer to actually detect infinite loops, but until then,
this bandaid seems acceptable.
Since the situation seems to be rare enough, raise the number
of instructions to 10000 (previously 1000).
Three people other than myself had success with this patch.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5293 c046a42c-6fe2-441c-8c8c-71466251a162
