Add a bootloader helper to generate simple bootloaders for kernel.
It can help us reduce inline hex hack and also keep MIPS release 6
compatibility easier.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210127065424.114125-2-jiaxun.yang@flygoat.com>
[PMD: Restricted bl_reg enum to C source,
inverted bl_gen_write() args,
added license in hw/mips/bootloader.h]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is already a MemMapEntry type defined in hwaddr.h. Let's drop
the loongson3 defined `struct MemmapEntry` and use the existing one.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210122122404.11970-1-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is new interest in the SD/MMC device emulation, so it
would be good to have more than only one maintainer / reviewer
for it.
Bin Meng proved by his contributions a deep understanding of the
SD cards internals, so let's add him to the corresponding section
in the MAINTAINERS file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210216132841.1121653-1-f4bug@amsat.org>
s->prnsts is updated in both branches of the if () else () statement.
Move the common bits outside so that it is cleaner.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1613447214-81951-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Unlike SD mode, when SD card is working in SPI mode, the argument
of CMD13 is stuff bits. Hence we should bypass the RCA check.
See "Physical Layer Specification Version 8.00", chapter 7.3.1.3
Detailed Command Description (SPI mode):
"The card shall ignore stuff bits and reserved bits in an argument"
and Table 7-3 Commands and Arguments (SPI mode):
"CMD13 Argument [31:0] stuff bits"
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210216150225.27996-9-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
High capacity cards don't support write protection hence we should
not perform the write protect groups check in CMD24/25 for them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210216150225.27996-8-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
High capacity cards don't support write protection hence we should
not perform the write protect groups check in sd_erase() for them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210216150225.27996-6-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These APIs and macros may be referenced by functions that are
currently before them. Move them ahead a little bit.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210216150225.27996-5-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Per the "Physical Layer Specification Version 8.00", table 4-26
(SD mode) and table 7-3 (SPI mode) command descriptions, CMD30
response type is R1, not R1b.
Fixes: a1bb27b1e9 ("SD card emulation initial implementation")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210216150225.27996-4-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Per the "Physical Layer Specification Version 8.00", table 4-26
(SD mode) and table 7-3 (SPI mode) command descriptions, the
following commands:
- CMD28 (SET_WRITE_PROT)
- CMD29 (CLR_WRITE_PROT)
- CMD30 (SEND_WRITE_PROT)
are only supported by SDSC cards.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210216150225.27996-3-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
For high capacity memory cards, the erase start address and end
address are multiplied by 512, but the address check is still
based on the original block number in sd->erase_{start, end}.
Fixes: 1bd6fd8ed5 ("hw/sd/sdcard: Do not attempt to erase out of range addresses")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210216150225.27996-2-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Besides CMD12, the following command's reponse type is R1b:
- SET_WRITE_PROT (CMD28)
- CLR_WRITE_PROT (CMD29)
- ERASE (CMD38)
Reuse the same s->stopping to indicate a R1b reponse is needed.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210128063035.15674-10-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
CMD12's response type is R1b, which is basically a R1 plus optional
addition of the busy signal token that can be any number of bytes.
A zero value indicates card is busy and a non-zero value indicates
the card is ready for the next command.
Current implementation sends the busy signal token without sending
the R1 first. This does not break the U-Boot/Linux mmc_spi driver,
but it does not make the VxWorks driver happy.
Move the testing logic of s->stopping in the SSI_SD_RESPONSE state
a bit later, after the first byte of the card reponse is sent out,
to conform with the spec. After the busy signal token is sent, the
state should be transferred to SSI_SD_CMD.
Fixes: 775616c3ae ("Partial SD card SPI mode support")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210128063035.15674-9-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The SEND_IF_COND command (CMD8) response is of format R7, but
current code returns R1 for CMD8. Fix it.
Fixes: 775616c3ae ("Partial SD card SPI mode support")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210128063035.15674-8-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
For a multiple block write operation, each block begins with a multi
write start token. Unlike the SD mode that the multiple block write
ends when receiving a STOP_TRAN command (CMD12), a special stop tran
token is used to signal the card.
Emulating this by manually sending a CMD12 to the SD card core, to
bring it out of the receiving data state.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-7-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add 2 more states for the block write operation. The SPI host needs
to send a data start token to start the transfer, and the data block
written to the card will be acknowledged by a data response token.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
[PMD: Change VMState version id 6 -> 7]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-6-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
At present there is a data_ready() callback for the SD data read
path. Let's add a receive_ready() for the SD data write path.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-5-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
At present the single/multiple block write in SPI mode is blocked
by sd_normal_command(). Remove the limitation.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210128063035.15674-4-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The single block read (CMD17) codes are the same as the multiple
block read (CMD18). Merge them into one. The same applies to single
block write (CMD24) and multiple block write (CMD25).
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-3-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
In the case of a multiple block read operation every transferred
block has its suffix of CRC16. Update the state machine logic to
handle multiple block read.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
[PMD: Change VMState version id 5 -> 6]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-2-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* Some other small gitlab-CI improvements
* Some qtest fixes
-----BEGIN PGP SIGNATURE-----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=SDf2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-02-19' into staging
* Always build the container images in the gitlab-CI
* Some other small gitlab-CI improvements
* Some qtest fixes
# gpg: Signature made Fri 19 Feb 2021 06:10:20 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2021-02-19:
travis.yml: Limit simultaneous jobs to 3
gitlab-ci.yml: Run check-tcg with TCI
tests/qtest/boot-sector: Check that the guest did not panic
gitlab-ci: Disable vhost-kernel in build-disable job
scripts/checkpatch: Improve the check for authors mangled by the mailing list
gitlab-ci: Display Avocado log content when tests timeout
gitlab: fix inconsistent indentation
gitlab: add fine grained job deps for all build jobs
gitlab: always build container images
tests/qtest/boot-serial-test: Test Virt machine with 'max'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is not used, and it is unlikely that a new use case will emerge
anytime soon because the scope of OpenGL contexts are limited due to
the nature of the frontend, VirGL, processing simple commands from the
guest.
Remove the function and ease implementing a new OpenGL backend a little.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210219094702.90789-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no need of dynamic allocation as dcl is a small singleton.
Static allocation reduces code size and makes hacking with ui/cocoa a
bit easier.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210219084419.90181-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Old Macs were not equipped with mice with an ability to perform
"right clicks" and ui/cocoa interpreted left button down with
left command key pressed as right button down as a workaround.
The workaround has an obvious downside: you cannot tell the guest
that the left button is down while the left command key is
pressed.
Today, Macs has trackpads, Apple Mice, or Magic Mice. They are
capable to emulate right clicks with gestures, which also allows
to perform right clicks on "BootCamp" OSes like Windows.
By removing the workaround, we overcome its downside, and provide
a behavior consistent with BootCamp.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210212000706.28616-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When qemu is built with modules, but a given module doesn't load
qemu should handle that gracefully. When ui-spice-core.so isn't
able to be loaded and qemu is invoked with -display spice-app or
-spice, qemu will dereference a null pointer. With this change we
check the pointer before dereferencing and error out in a normal
way.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210213032318.346093-1-brogers@suse.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The old CocoaView had an idea of synchronizing the host window
configuration and the guest screen configuration. Here, the guest screen
actually means pixman image given ui/cocoa display implementation.
However, [CocoaView -drawRect:] directly interacts with the pixman
image buffer in reality. There is no such distinction of "host" and
"guest." This change removes the "host" configuration and let drawRect
consistently have the direct reference to pixman image. It allows to
get rid of the error-prone "sync" and reduce code size a bit.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210212000629.28551-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This solves the client having slow/outdated VGA/2D console. It's a
regression introduced when the code was switched to render it via opengl
in commit 4423184376 ("spice/gl: render DisplaySurface via opengl")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210216092056.2301293-2-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the introduction of spice/virgl support in commit
474114b7 ("spice: add opengl/virgl/dmabuf support"), the drawing isn't
being flushed before notifying the client. This results in
outdated/sluggish drawing on client side, in particular when using the
Linux console.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210216092056.2301293-1-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Even though the host machines that run the Travis CI jobs have
quite a lot of CPUs (e.g. nproc in an aarch64 job reports 32), the
containers on Travis are still limited to 2 vCPUs according to:
https://docs.travis-ci.com/user/reference/overview/#approx-boot-time
So we do not gain much when compiling with a job number based on
the output of "getconf _NPROCESSORS_ONLN" - quite the contrary, the
aarch64 containers are currently aborting quite often since they
are running out of memory. Thus let's rather use a fixed number
like 3 in the jobs here, so that e.g. two threads can actively run
while a third one might be waiting for I/O operations to complete.
This should hopefully fix the out-of-memory failures in the aarch64
CI jobs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210217102531.1441557-1-thuth@redhat.com>
[AJB: add comment]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210217121932.19986-6-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's now possible to also run the non-x86 TCG tests with TCI.
Message-Id: <20210127055903.40148-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The s390-ccw bios code panics if it can not boot successfully. In
this case, it does not make sense that we wait the full 600 seconds
for the boot sector test to finish and can signal the failure
immediately, thus let's check the status of the guest with the
"query-status" QMP command here, too.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210212113141.854871-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 299e6f19b3 ("vhost-net: revamp configure logic") added
the --enable-vhost-kernel option.
Disable it in the build-disable job.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210131104621.221602-1-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There were recently some patches on the list which had their "From:"
line mangled like this:
From: qemu_oss--- via <qemu-devel@nongnu.org>
Since our test in the checkpatch.pl script did not trigger here, the
patches finally also ended up in a pull request, with the wrong author
set. So let's improve the regular expression to also complain on
these new patterns, too.
Message-Id: <20210216071512.1199827-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit ba2232bae6 ("gitlab-ci: Refactor code that show logs
of failed acceptances") we display the log content of failing tests
(Avocado "FAIL" event).
Since we are also interested in tests timeouting, update our global
Avocado config to display log content for the "INTERRUPT" event,
"possible when the timeout is reached" (See [*]).
[*] https://avocado-framework.readthedocs.io/en/latest/guides/writer/chapters/writing.html#test-statuses
Suggested-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210215171438.935665-1-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The standard is to use 2 space indent, not 3.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216132954.295906-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This allows the build jobs to start running as soon as their respective
container image is ready, instead of waiting for all container builds
to finish.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216132954.295906-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently we attempt to skip building container images if the commits do
not involve changes to the dockerfiles or gitlab CI definitions.
Conceptually this makes sense, but there is a challenge in the real
world implementation of this in gitlab.
In the case of a CI pipeline triggered from a merge request, GitLab
knows the common ancestor of the merge request and the main git repo,
so it can trivially determine if any of the commits associated with
the MR change the dockerfiles.
In the case of a CI pipeline triggered from a push to a branch, it is
much more difficult. There is no concept of a common ancestor in this
case. Instead GitLab looks at the set of commits in the git push event.
On the surface this may sound reasonable, but it doesn't take into
account that a push event does not always contain the full set of
patches from a branch.
For example, consider pushing 5 commits, one of which contains a
dockerfile change. This will trigger a CI pipeline for the
containers. Now consider you do some more work on the branch and push 3
further commits, so you now have a branch of 8 commits. For the second
push GitLab will only look at the 3 most recent commits, the other 5
were already present. Thus GitLab will not realize that the branch has
dockerfile changes that need to trigger the container build.
This can cause real world problems:
- Push 5 commits to branch "foo", including a dockerfile change
=> rebuilds the container images with content from "foo"
=> build jobs runs against containers from "foo"
- Refresh your master branch with latest upstream master
=> rebuilds the container images with content from "master"
=> build jobs runs against containers from "master"
- Push 3 more commits to branch "foo", with no dockerfile change
=> no container rebuild triggers
=> build jobs runs against containers from "master"
The "changes" conditional in gitlab is OK, *provided* your build
jobs are not relying on any external state from previous builds.
This is NOT the case in QEMU, because we are building container
images and these are cached. This is a scenario in which the
"changes" conditional is not usuable.
The only other way to avoid this problem would be to use the git
branch name as the container image tag, instead of always using
"latest". The downside of this approach is that the user's gitlab
registry will grow significantly until it starts to trigger
GitLab's automatic deletion policy. Every time the user starts
a new branch they will have to trigger a rebuild of the container
images. Given this, we might as well just drop the conditional
and always build the container images. Most of the time docker
will be able to use the layer cache to avoid the most expensive
part of the rebuild process (installing all the RPMs/debs/etc)
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216132954.295906-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using KVM, using a specific cpu type will only work if the
host CPU really is that exact CPU type.
During testing we can simply use the 'max' CPU which will select
all the features available from the host.
This allow running this test on a Cavium CN8890 (ThunderX cores).
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210205144345.2068758-4-f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When management applications (like Libvirt) want to check whether
memory-backend-file.pmem is supported they can list object
properties using 'qom-list-properties'. However, 'pmem' is
declared always (and thus reported always) and only at runtime
QEMU errors out if it was built without libpmem (and thus can not
guarantee write persistence). This is suboptimal since we have
ability to declare attributes at compile time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1915216
Message-Id: <dfcc5dc7e2efc0283bc38e3036da2c0323621cdb.1611647111.git.mprivozn@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Replace "whitelist" in the device-crash-test script with
"rule list".
I'm using "rule list" instead of "allow list" or "pass list"
because the list is not used only for expected/allowed errors.
It also contain rules specifying which errors shouldn't be
ignored and/or should be fatal.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210202191207.4103973-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Adds the support for AMD 3rd generation processors. The model
display for the new processor will be EPYC-Milan.
Adds the following new feature bits on top of the feature bits from
the first and second generation EPYC models.
pcid : Process context identifiers support
ibrs : Indirect Branch Restricted Speculation
ssbd : Speculative Store Bypass Disable
erms : Enhanced REP MOVSB/STOSB support
fsrm : Fast Short REP MOVSB support
invpcid : Invalidate processor context ID
pku : Protection keys support
svme-addr-chk : SVM instructions address check for #GP handling
Depends on the following kernel commits:
14c2bf81fcd2 ("KVM: SVM: Fix #GP handling for doubly-nested virtualization")
3b9c723ed7cf ("KVM: SVM: Add support for SVM instruction address check change")
4aa2691dcbd3 ("8ce1c461188799d863398dd2865d KVM: x86: Factor out x86 instruction emulation with decoding")
4407a797e941 ("KVM: SVM: Enable INVPCID feature on AMD")
9715092f8d7e ("KVM: X86: Move handling of INVPCID types to x86")
3f3393b3ce38 ("KVM: X86: Rename and move the function vmx_handle_memory_failure to x86.c")
830bd71f2c06 ("KVM: SVM: Remove set_cr_intercept, clr_cr_intercept and is_cr_intercept")
4c44e8d6c193 ("KVM: SVM: Add new intercept word in vmcb_control_area")
c62e2e94b9d4 ("KVM: SVM: Modify 64 bit intercept field to two 32 bit vectors")
9780d51dc2af ("KVM: SVM: Modify intercept_exceptions to generic intercepts")
30abaa88382c ("KVM: SVM: Change intercept_dr to generic intercepts")
03bfeeb988a9 ("KVM: SVM: Change intercept_cr to generic intercepts")
c45ad7229d13 ("KVM: SVM: Introduce vmcb_(set_intercept/clr_intercept/_is_intercept)")
a90c1ed9f11d ("(pcid) KVM: nSVM: Remove unused field")
fa44b82eb831 ("KVM: x86: Move MPK feature detection to common code")
38f3e775e9c2 ("x86/Kconfig: Update config and kernel doc for MPK feature on AMD")
37486135d3a7 ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161290460478.11352.8933244555799318236.stgit@bmoger-ubuntu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We don't need to create an empty, mutable list to pass to _gen_tree;
since it is now typed as a Sequence, we can use the empty tuple as a
default and omit the argument.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-19-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Optional[List] is clunky; an empty sequence can more elegantly convey
"no variants". By downgrading "List" to "Sequence", we can also accept
tuples; this is useful for the empty tuple specifically, which we may
use as a default parameter because it is immutable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Doc string touched up]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
To reflect the work that went into strictly typing introspect.py,
punish myself by claiming credit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
