The e1000_receive function for the e1000 needs to discard packets longer than
1522 bytes if the SBP and LPE flags are disabled. The linux driver assumes
this behavior and allocates memory based on this assumption.
Signed-off-by: Michael Contreras <michael@inetric.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kwolf/for-anthony:
coroutine-sigaltstack.c: Use stack_t, not struct sigaltstack
stream: fix ratelimit_set_speed
atapi: make change media detection for guests easier
Documentation: Update image format information
Documentation: Update block cache mode information
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/usb.73:
ehci-sysbus: Attach DMA context.
usb: fail usbdevice_create() when there is no USB bus
usb: tag usb host adapters as not hotpluggable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If you have a guest with a media in the optical drive and you change
it, the windows guest cannot properly recognize this media change.
Windows needs to detect sense "NOT_READY with ASC_MEDIUM_NOT_PRESENT"
before we send sense "UNIT_ATTENTION with ASC_MEDIUM_MAY_HAVE_CHANGED".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 0d8d769085 introduced
a regression in virtio-net performance because it looks
into the ring aggressively while we really only care
about a single packet worth of buffers.
Reported as bugzilla 1066055 in launchpad.
To fix, add parameters limiting lookahead, and
use in virtqueue_avail_bytes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Tested-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We are currently checking for an exact type match. Use QOM dynamic_cast to
check for a compatible type instead.
Cc: Konrad Frederic <fred.konrad@greensocs.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2:
- also add cast to qbus_find_recursive (Peter)
- simplify by doing object_dynamic_cast instead of messing with classes
This was left as NULL on the initial merge due to debate on the mailing list on
how to handle DMA contexts for sysbus devices. Patch
9e11908f12 was later merged to fix OHCI. This is the,
equivalent fix for sysbus EHCI.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Report an error instead of segfaulting when attaching a USB device to a
machine with no USB busses:
$ qemu-system-arm -machine vexpress-a9 \
-sd Fedora-17-armhfp-vexpress-mmcblk0.img \
-kernel vmlinuz-3.4.2-3.fc17.armv7hl \
-initrd initramfs-3.4.2-3.fc17.armv7hl.img \
-usbdevice disk:format=raw:test.img
Note that the vexpress-a9 machine does not have a USB host controller.
Reported-by: David Abdurachmanov <David.Abdurachmanov@cern.ch>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hotplugging them simply doesn't work, so tag them accordingly to
avoid users trying and then crashing qemu.
For xhci there is nothing fundamental which prevents hotplug from
working, we'll "only" need a exit() function which cleans up
everything properly. That isn't for 1.3 though.
For ehci+uhci+ohci hotplug can't be supported until qemu gains the
capability to hotplug multifunction pci devices.
https://bugzilla.redhat.com/show_bug.cgi?id=879096
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The devram memslot stays active when qxl enters UNDEFINED mode (i.e, no
primary surface). If migration has occurred while the device is in
UNDEFINED stae, the memslots have to be reloaded at the destination.
Fixes rhbz#874574
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* bonzini/scsi-next:
virtio-scsi: Fix subtle (guest) endian bug
virtio-scsi: Fix some endian bugs with virtio-scsi
iscsi: do not assume device is zero initialized
iscsi: fix deadlock during login
iscsi: fix segfault in url parsing
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* agraf/s390-for-upstream-1.3:
sclp: Fix uninitialized var in handle_write_event_buf().
s390: Fix ram_size updating in machine init
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio-scsi config space is, by specification, in guest endian (which
is ill-defined, but there you go). In virtio_scsi_get_config() we set up
all the fields in there, using stl_raw(). Which is a problem for the
max_channel and max_target fields, which are 16-bit, not 32-bit. For
little-endian targets we get away with it by accident, since the first
two bytes will still be correct, and the extra two bytes written (with
zeroes) will be overwritten correctly by the next store.
But for big-endian guests, this means the max_target field ends up as zero,
which means the guest will only recognize a single disk on the virtio-scsi
bus. This patch fixes the problem.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul 'Rusty' Russell <rusty@rustcorp.com.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The virtio-scsi specification does not specify the correct endianness for
fields in the request structure. It's therefore best to assume that it is
"guest native" endian since that's the (stupid and poorly defined) norm in
virtio.
However, the qemu device for virtio-scsi has no byteswaps at all, and so
will break if the guest has different endianness from the host. This patch
fixes it by adding tswap() calls for the sense_len and resid fields in
the request structure. In theory status_qualifier needs swaps as well,
but that field is never actually touched. The tag field is a uint64_t, but
since its value is completely arbitrary, it might as well be uint8_t[8]
and so it does not need swapping.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul 'Rusty' Russell <rusty@rustcorp.com.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This bug occurs when the SET flag of Register B is enabled. When an RTC
data register (i.e. any of the ten time/calender CMOS bytes) is set, the
data is (as expected) correctly stored in the cmos_data array. However,
since the SET flag is enabled, the function rtc_set_time is not invoked.
As a result, the field base_rtc in RTCState remains uninitialized. This
causes a problem on subsequent writes which can end up overwriting data.
To see this, consider writing data to Register A after having written
data to any of the RTC data registers; the following figure illustrates
the call stack for the Register A write operation:
+- cmos_io_port_write
+-- check_update_timer
+---- get_next_alarm
+------ rtc_update_time
In rtc_update_time, get_guest_rtc calculates the wrong time and
overwrites the previously written RTC data register values.
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
g_assert_cmpint is not available on glib 2.12, which is the minimum
version required to build QEMU (we only require 2.16 to run tests,
since that is the first version including GTester). Do not use it
in hardware models, use a normal assertion instead.
This fixes the buildbot failure for default_x86_64_rhel5.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix typos, whitespace and update comments to match current
implementation.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Disable the rate-limit timer on device remove (e.g. hot-unplug).
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If we got fewer bytes from the backend than requested, don't poke the
backend for more bytes; the guest will ask for more (or if the guest has
already asked for more, the backend knows about it via handle_input()).
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Popping an elem from the vq just to find out its length causes problems
with save/load later on. Use the new virtqueue_get_avail_bytes()
function instead, saves us the complexity in the migration code, as well
as makes the migration endian-safe.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It used a wrong struct type name since its introduction in
8f04ee0882 (isa: pic: convert to QEMU
Object Model), apparently it is unused so far.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All conditional deallocation can now be done with object_delete.
Remove the @qom_allocated and @glib_allocated fields; replace the latter
with a direct assignment of the @free function pointer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an ObjectClass method that is done at object_unparent time. It
should remove any backlinks to the object in the composition tree,
so that object_delete will be able to drop the last reference and
free the object.
Use it for qdev buses.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some gcc versions rightly complain about a possibly unitialized rc,
so let's move setting it before the QTAILQ_FOREACH().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The global variable 'ram_size' is hidden by the local variable
declaration in s390_init(). Since we want to update the global
ram size in certain cases we must not use a local ram_size
variable.
- This fixes booting with unusual ram sizes like -m 67001
- This changes behaviour back to the situation before commit
5f072e1f30
(create struct for machine initialization arguments)
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
In one of the recent reworks to the XICS code, a bug was introduced where
we use the wrong sense and allocate level interrupts instead of message
interrupts for PCI MSIs. This patch fixes it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Pass qemu_sglist_init the global dma_context_memory rather than a NULL
pointer; this fixes a segfault in dma_memory_map() when the guest
starts using DMA.
Reported-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 0d93692 (qdev: Convert busses to QEMU Object Model, 2012-05-02)
removed a check on the type of the bus where a SCSI disk is hotplugged.
However, hot-plugging to the wrong kind of device now causes a crash
due to either a NULL pointer dereference (avoided by the previous patch)
or a failed QOM cast.
Instead, in this case we need to use object_dynamic_cast and check for
the result, similar to what was done before that commit.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid passing a non-PCI IRQ to ich9_gsi_to_pirq. It's wrong and triggers
an assertion.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Same as for i44fx: KVM does not support SMM yet. Signal it initialized
to Seabios to avoid failures.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
