* kraxel/usb.33:
usb-ohci: td.cbp incorrectly updated near page end
usb-host: properly release port on unplug & exit
usb-storage: cancel I/O on reset
Fix parse of usb device description with multiple configurations
The current code that updates the cbp value after a transfer looks like this:
td.cbp += ret;
if ((td.cbp & 0xfff) + ret > 0xfff) {
<handle page overflow>
because the 'ret' value is effectively added twice the check may fire too early
when the overflow hasn't happened yet.
Below is one of the possible changes that correct the behavior:
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out port release into a separate function. Call release function
in exit notifier too. Add explicit call the USBDEVFS_RELEASE_PORT
ioctl, just closing the hub file handle seems not to be enougth. Make
sure we release the port before resetting the device, otherwise host
drivers will not re-attach.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When resetting the usb-storage device we'll have to carefully cancel
and clear any requests which might be in flight, otherwise we'll confuse
the state machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A recent patch set from Avi break the dirty bitmap support of Xen. But
this is because xen_sync_dirty_bitmap will return an error for an
unhandled memory range (a0000 - bffff). However this is not a fatal
error, so we should just continue instead of aborting.
There is now an error printed when the Xen call failed.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* pmaydell/arm-devs.for-upstream:
add L2x0/PL310 cache controller device
arm: add dummy gic security registers
arm: Set frequencies for arm_timer
arm: add missing scu registers
hw/omap_gpmc: Fix region map/unmap when configuring prefetch engine
hw/omap1.c: Drop unused includes
hw/omap1.c: Separate dpll_ctl from omap_mpu_state
hw/omap1.c: Separate PWT from omap_mpu_state
hw/omap1.c: Separate PWL from omap_mpu_state
hw/omap1.c: omap_mpuio_init() need not be public
hw/pl110.c: Add post-load hook to invalidate display
hw/pl181.c: Add save/load support
This is just a dummy device for ARM L2 cache controllers, based on the
pl310. The cache type parameter can be defined by a property value
and has a meaningful default.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
[Peter Maydell: removed stray blank line at end]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement handling for the RAZ/WI gic security registers.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use qdev properties to allow board modelers to set the frequencies
for the sp804 timer. Each of the sp804's timers can have an
individual frequency. The timers default to 1MHz.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add power control register to a9mpcore
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When configuring the prefetch engine (and also when resetting from
a state where the prefetch engine was enabled) be careful to adhere
to the "unmap/change config fields/map" ordering, to avoid trying
to delete the wrong MemoryRegions. This fixes an assertion failure
in some cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexander Graf <agraf@suse.de>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We no longer use any of the lower bits of a ram_addr, so we might as well
use them for the io table index. This increases the number of potential
I/O handlers by a factor of 8.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Unlike ->readonly, ->readable is not inherited from aliase, so we can simply
query the memory region.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Now that all mmio goes through MemoryRegions, we can convert
io_mem_opaque to be a MemoryRegion pointer, and remove the thunks
that convert from old-style CPU{Read,Write}MemoryFunc to MemoryRegionOps.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Convert the fixed-address IO_MEM_RAM, IO_MEM_ROM, IO_MEM_UNASSIGNED,
and IO_MEM_NOTDIRTY io handlers to MemoryRegions. These aren't real
regions, since they are never added to the memory hierarchy, but they
allow reuse of the dispatch functionality.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Its use of IO_MEM_ROM and friends will later cause #include loops; and it
is too large to merit inlining.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The code sometimes uses range comparisons on io indexes (e.g.
index =< IO_MEM_ROM). Avoid these as they make moving to objects harder.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
cpu_register_physical_memory_log() does not update region_offset
if a page was previously registered for the same address. This
could cause mmio accesses going to the wrong place, by using the
old region_offset.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
backend_registered was used to lazify the process of registering an
mmio region, since the it is different for the I/O address space and
the memory address space. However, it also makes registration dependent
on the region being visible in the address space. This is not the case
for "fake" regions, like watchpoints or IO_MEM_UNASSIGNED.
Remove backend_registered and always initialize the region. If it turns
out to be part of the I/O address space, we've wasted an I/O slot, but
that's not too bad. In any case this will be optimized later on.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently mmio access goes directly to the io_mem_{read,write} arrays.
In preparation for eliminating them, add indirection via a function.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Instead of returning a PhysPageDesc pointer, return a temporary.
This lets us move away from actually storing PhysPageDesc's, and
instead sythesising them when needed.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Instead of doing device endianness compensation in cpu_register_io_memory(),
do it in the memory core.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The getter is no longer used, so it is completely removed.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Version 3 ram_load depends on ram_addrs, which are not stable. Version 4
was introduced in 0.13 (and RHEL 6), so this means live migration from 0.12
and earlier to 1.1 or later will not work.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
ram_addr is (a) unstable (b) going away. Sort by idstr instead.
Commit b2e0a138e initially introduced the sorting for the purpose
of improving debuggability. After this patch, the order is still
stable, but perhaps less usable by a human.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Avoid using ram_addr_t, instead use (MemoryRegion *, offset) pairs.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
As a step in moving live migration from RAMBlocks to MemoryRegions,
store the MemoryRegion in a RAMBlock.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.
Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration. Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.
Signed-off-by: Avi Kivity <avi@redhat.com>
Changed From V1:
Use DPRINTF instead of fprintf,because it is not an error.
When testing ipod on QEMU by He Jie Xu<xuhj@linux.vnet.ibm.com>,qemu made a assertion.
We found that the ipod with 2 configurations,and the usb-linux did not parse the descriptor correctly.
The descr_len returned is the total length of the all configurations,not one configuration.
The older version will through the other configurations instead of skip,continue parsing the descriptor of interfaces/endpoints in other configurations,then went wrong.
This patch will put the configuration descriptor parse in loop outside and dispel the other configurations not requested.
Signed-off-by: Cao,Bing Bu <mars@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a post-load hook which invalidates the display. In particular, if we
don't do this and the display size we've just reloaded is larger than
the default then we will segfault trying to read off the end of the buffer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qemu-kvm/memory/page_desc: (22 commits)
Remove cpu_get_physical_page_desc()
sparc: avoid cpu_get_physical_page_desc()
virtio-balloon: avoid cpu_get_physical_page_desc()
vhost: avoid cpu_get_physical_page_desc()
kvm: avoid cpu_get_physical_page_desc()
memory: remove CPUPhysMemoryClient
xen: convert to MemoryListener API
memory: temporarily add memory_region_get_ram_addr()
xen, vga: add API for registering the framebuffer
vhost: convert to MemoryListener API
kvm: convert to MemoryListener API
kvm: switch kvm slots to use host virtual address instead of ram_addr_t
memory: add API for observing updates to the physical memory map
memory: replace cpu_physical_sync_dirty_bitmap() with a memory API
framebuffer: drop use of cpu_physical_sync_dirty_bitmap()
loader: remove calls to cpu_get_physical_page_desc()
framebuffer: drop use of cpu_get_physical_page_desc()
memory: introduce memory_region_find()
memory: add memory_region_is_logging()
memory: add memory_region_is_rom()
...
