The function gen_get_ccr() returns a tcg_temp created with
tcg_temp_new(). Free it with tcg_temp_free().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190310003428.11723-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Switch the m68k target from the old unassigned_access hook
to the transaction_failed hook.
The notable difference is that rather than it being called
for all physical memory accesses which fail (including
those made by DMA devices or by the gdbstub), it is only
called for those made by the CPU via its MMU. (In previous
commits we put in explicit checks for the direct physical
loads made by the target/m68k code which will no longer
be handled by calling the unassigned_access hook.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210165636.28366-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In get_physical_address(), use address_space_ldl() and
address_space_stl() instead of ldl_phys() and stl_phys().
This allows us to check whether the memory access failed.
For the moment, we simply return -1 in this case;
add a TODO comment that we should ideally generate the
appropriate kind of fault.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210165636.28366-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In dump_address_map(), use address_space_ldl() instead of ldl_phys().
This allows us to check whether the memory access failed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210165636.28366-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190423102145.14812-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove a function of the same name from target/arm/.
Use a branchless implementation of abs gleaned from gcc.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the single opcode in .opc with a null-terminated
array in .opt_opc. We still require that all opcodes be
used with the same .vece.
Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion. Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.
Convert all existing vector aware front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-9-armbru@redhat.com>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
scripts/clean-header-guards.pl warns these headers use reserved
identifier _XTENSA_CORE_CONFIGURATION_H as header guard symbol. It
additionally warns the guard doesn't match the file name.
Reuse of the same guard symbol in multiple headers is okay as long as
they cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use the guard
symbol scripts/clean-header-guards.pl picks, less the TARGET_ prefix.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-5-armbru@redhat.com>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Message-Id: <1550073530-4138-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Acked-by: Stafford Horne <shorne@gmail.com>
Message-Id: <1550073577-4248-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Stop using variable length array in dc_zva
* Implement M-profile XPSR GE bits
* Don't enable ARMV7M_EXCP_DEBUG from reset
* armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
* armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
* fix various minor issues to allow building for Windows-on-ARM64
* aspeed: Set SDRAM size
* Allow system registers for KVM guests to be changed by QEMU code
* raspi: Diagnose requests for too much RAM
* virt: Support firmware configuration with -blockdev
-----BEGIN PGP SIGNATURE-----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=hcal
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190507' into staging
target-arm queue:
* Stop using variable length array in dc_zva
* Implement M-profile XPSR GE bits
* Don't enable ARMV7M_EXCP_DEBUG from reset
* armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
* armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
* fix various minor issues to allow building for Windows-on-ARM64
* aspeed: Set SDRAM size
* Allow system registers for KVM guests to be changed by QEMU code
* raspi: Diagnose requests for too much RAM
* virt: Support firmware configuration with -blockdev
# gpg: Signature made Tue 07 May 2019 12:59:30 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190507:
target/arm: Stop using variable length array in dc_zva
target/arm: Implement XPSR GE bits
hw/intc/armv7m_nvic: Don't enable ARMV7M_EXCP_DEBUG from reset
hw/intc/armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
hw/arm/armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
osdep: Fix mingw compilation regarding stdio formats
util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
qga: Fix mingw compilation warnings on enum conversion
QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
arm: aspeed: Set SDRAM size
arm: Allow system registers for KVM guests to be changed by QEMU code
hw/arm/raspi: Diagnose requests for too much RAM
hw/arm/virt: Support firmware configuration with -blockdev
pflash_cfi01: New pflash_cfi01_legacy_drive()
pc: Rearrange pc_system_firmware_init()'s legacy -drive loop
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the dc_zva helper function uses a variable length
array. In fact we know (as the comment above remarks) that
the length of this array is bounded because the architecture
limits the block size and QEMU limits the target page size.
Use a fixed array size and assert that we don't run off it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190503120448.13385-1-peter.maydell@linaro.org
In the M-profile architecture, if the CPU implements the DSP extension
then the XPSR has GE bits, in the same way as the A-profile CPSR. When
we added DSP extension support we forgot to add support for reading
and writing the GE bits, which are stored in env->GE. We did put in
the code to add XPSR_GE to the mask of bits to update in the v7m_msr
helper, but forgot it in v7m_mrs. We also must not allow the XPSR we
pull off the stack on exception return to set the nonexistent GE bits.
Correct these errors:
* read and write env->GE in xpsr_read() and xpsr_write()
* only set GE bits on exception return if DSP present
* read GE bits for MRS if DSP present
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190430131439.25251-5-peter.maydell@linaro.org
At the moment the Arm implementations of kvm_arch_{get,put}_registers()
don't support having QEMU change the values of system registers
(aka coprocessor registers for AArch32). This is because although
kvm_arch_get_registers() calls write_list_to_cpustate() to
update the CPU state struct fields (so QEMU code can read the
values in the usual way), kvm_arch_put_registers() does not
call write_cpustate_to_list(), meaning that any changes to
the CPU state struct fields will not be passed back to KVM.
The rationale for this design is documented in a comment in the
AArch32 kvm_arch_put_registers() -- writing the values in the
cpregs list into the CPU state struct is "lossy" because the
write of a register might not succeed, and so if we blindly
copy the CPU state values back again we will incorrectly
change register values for the guest. The assumption was that
no QEMU code would need to write to the registers.
However, when we implemented debug support for KVM guests, we
broke that assumption: the code to handle "set the guest up
to take a breakpoint exception" does so by updating various
guest registers including ESR_EL1.
Support this by making kvm_arch_put_registers() synchronize
CPU state back into the list. We sync only those registers
where the initial write succeeds, which should be sufficient.
This commit is the same as commit 823e1b3818 which we
had to revert in commit 942f99c825, except that the bug
which was preventing EDK2 guest firmware running has been fixed:
kvm_arm_reset_vcpu() now calls write_list_to_cpustate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
The EXCP_DMP trap is considered legacy.
"In PA-RISC 1.1 (Second Edition) and later revisions, processors must use
traps 26, 27,and 28 which provide equivalent functionality"
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-Id: <20190423063621.8203-3-nick.hudson@gmx.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These instructions are present on pcxl and pcxl2 machines,
and are used by NetBSD and OpenBSD. See
https://parisc.wiki.kernel.org/images-parisc/a/a9/Pcxl2_ers.pdf
page 13-9 (195/206)
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-Id: <20190423063621.8203-2-nick.hudson@gmx.co.uk>
[rth: Use extending loads, locally managed temporaries.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enable the FPU by default for the Cortex-M4 and Cortex-M33.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-27-peter.maydell@linaro.org
Implement the VLLDM instruction for v7M for the FPU present cas.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-26-peter.maydell@linaro.org
Implement the VLSTM instruction for v7M for the FPU present case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-25-peter.maydell@linaro.org
The M-profile architecture floating point system supports
lazy FP state preservation, where FP registers are not
pushed to the stack when an exception occurs but are instead
only saved if and when the first FP instruction in the exception
handler is executed. Implement this in QEMU, corresponding
to the check of LSPACT in the pseudocode ExecuteFPCheck().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-24-peter.maydell@linaro.org
Pushing registers to the stack for v7M needs to handle three cases:
* the "normal" case where we pend exceptions
* an "ignore faults" case where we set FSR bits but
do not pend exceptions (this is used when we are
handling some kinds of derived exception on exception entry)
* a "lazy FP stacking" case, where different FSR bits
are set and the exception is pended differently
Implement this by changing the existing flag argument that
tells us whether to ignore faults or not into an enum that
specifies which of the 3 modes we should handle.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-23-peter.maydell@linaro.org
In the v7M architecture, if an exception is generated in the process
of doing the lazy stacking of FP registers, the handling of
possible escalation to HardFault is treated differently to the normal
approach: it works based on the saved information about exception
readiness that was stored in the FPCCR when the stack frame was
created. Provide a new function armv7m_nvic_set_pending_lazyfp()
which pends exceptions during lazy stacking, and implements
this logic.
This corresponds to the pseudocode TakePreserveFPException().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-22-peter.maydell@linaro.org
Add a new helper function which returns the MMU index to use
for v7M, where the caller specifies all of the security
state, privilege level and whether the execution priority
is negative, and reimplement the existing
arm_v7m_mmu_idx_for_secstate_and_priv() in terms of it.
We are going to need this for the lazy-FP-stacking code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-21-peter.maydell@linaro.org
The M-profile FPCCR.ASPEN bit indicates that automatic floating-point
context preservation is enabled. Before executing any floating-point
instruction, if FPCCR.ASPEN is set and the CONTROL FPCA/SFPA bits
indicate that there is no active floating point context then we
must create a new context (by initializing FPSCR and setting
FPCA/SFPA to indicate that the context is now active). In the
pseudocode this is handled by ExecuteFPCheck().
Implement this with a new TB flag which tracks whether we
need to create a new FP context.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-20-peter.maydell@linaro.org
The M-profile FPCCR.S bit indicates the security status of
the floating point context. In the pseudocode ExecuteFPCheck()
function it is unconditionally set to match the current
security state whenever a floating point instruction is
executed.
Implement this by adding a new TB flag which tracks whether
FPCCR.S is different from the current security state, so
that we only need to emit the code to update it in the
less-common case when it is not already set correctly.
Note that we will add the handling for the other work done
by ExecuteFPCheck() in later commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-19-peter.maydell@linaro.org
We are close to running out of TB flags for AArch32; we could
start using the cs_base word, but before we do that we can
economise on our usage by sharing the same bits for the VFP
VECSTRIDE field and the XScale XSCALE_CPAR field. This
works because no XScale CPU ever had VFP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-18-peter.maydell@linaro.org
Move the NS TBFLAG down from bit 19 to bit 6, which has not
been used since commit c1e3781090 in 2015, when we
started passing the entire MMU index in the TB flags rather
than just a 'privilege level' bit.
This rearrangement is not strictly necessary, but means that
we can put M-profile-only bits next to each other rather
than scattered across the flag word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-17-peter.maydell@linaro.org
Handle floating point registers in exception return.
This corresponds to pseudocode functions ValidateExceptionReturn(),
ExceptionReturn(), PopStack() and ConsumeExcStackFrame().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-16-peter.maydell@linaro.org
The magic value pushed onto the callee stack as an integrity
check is different if floating point is present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-15-peter.maydell@linaro.org
The TailChain() pseudocode specifies that a tail chaining
exception should sanitize the excReturn all-ones bits and
(if there is no FPU) the excReturn FType bits; we weren't
doing this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-14-peter.maydell@linaro.org
For v8M floating point support, transitions from Secure
to Non-secure state via BLNS and BLXNS must clear the
CONTROL.SFPA bit. (This corresponds to the pseudocode
BranchToNS() function.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-13-peter.maydell@linaro.org
Implement the code which updates the FPCCR register on an
exception entry where we are going to use lazy FP stacking.
We have to defer to the NVIC to determine whether the
various exceptions are currently ready or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190416125744.27770-12-peter.maydell@linaro.org
Handle floating point registers in exception entry.
This corresponds to the FP-specific parts of the pseudocode
functions ActivateException() and PushStack().
We defer the code corresponding to UpdateFPCCR() to a later patch.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-11-peter.maydell@linaro.org
Currently the code in v7m_push_stack() which detects a violation
of the v8M stack limit simply returns early if it does so. This
is OK for the current integer-only code, but won't work for the
floating point handling we're about to add. We need to continue
executing the rest of the function so that we check for other
exceptions like not having permission to use the FPU and so
that we correctly set the FPCCR state if we are doing lazy
stacking. Refactor to avoid the early return.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-10-peter.maydell@linaro.org
The M-profile CONTROL register has two bits -- SFPA and FPCA --
which relate to floating-point support, and should be RES0 otherwise.
Handle them correctly in the MSR/MRS register access code.
Neither is banked between security states, so they are stored
in v7m.control[M_REG_S] regardless of current security state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-9-peter.maydell@linaro.org
If the floating point extension is present, then the SG instruction
must clear the CONTROL_S.SFPA bit. Implement this.
(On a no-FPU system the bit will always be zero, so we don't need
to make the clearing of the bit conditional on ARM_FEATURE_VFP.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-8-peter.maydell@linaro.org
Correct the decode of the M-profile "coprocessor and
floating-point instructions" space:
* op0 == 0b11 is always unallocated
* if the CPU has an FPU then all insns with op1 == 0b101
are floating point and go to disas_vfp_insn()
For the moment we leave VLLDM and VLSTM as NOPs; in
a later commit we will fill in the proper implementation
for the case where an FPU is present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190416125744.27770-7-peter.maydell@linaro.org
