The argument is not longer used and the implementation
uses now QOM instead of QemuOpts.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-4-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following QOM convention, object properties should
not be accessed directly.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-3-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ppc machines create a default usb controller based on a 'machine condition'.
Until now the logic was: create the usb controller if:
- the usb option was supplied in cli and value is true or
- the usb option was absent and both set_defaults and the machine
condition were true.
Modified the logic to:
Create the usb controller if:
- the machine condition is true and defaults are enabled or
- the usb option is supplied and true.
The main for this is to simplify the usb_enabled method.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-2-git-send-email-marcel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* enable 32-bit EL3 (TrustZone) for vexpress and virt boards
* add fw_cfg device to virt board for UEFI firmware config
* support passing commandline kernel/initrd to firmware
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MhXg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20141223' into staging
target-arm queue:
* enable 32-bit EL3 (TrustZone) for vexpress and virt boards
* add fw_cfg device to virt board for UEFI firmware config
* support passing commandline kernel/initrd to firmware
# gpg: Signature made Tue 23 Dec 2014 13:50:33 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20141223: (31 commits)
hw/arm/virt: enable passing of EFI-stubbed kernel to guest UEFI firmware
hw/arm: pass pristine kernel image to guest firmware over fw_cfg
hw/loader: split out load_image_gzipped_buffer()
arm: add fw_cfg to "virt" board
fw_cfg_mem: expose the "data_width" property with fw_cfg_init_mem_wide()
fw_cfg_mem: introduce the "data_width" property
exec: allows 8-byte accesses in subpage_ops
fw_cfg_mem: flip ctl_mem_ops and data_mem_ops to DEVICE_BIG_ENDIAN
fw_cfg_mem: max access size and region size are the same for data register
fw_cfg: move boards to fw_cfg_init_io() / fw_cfg_init_mem()
fw_cfg: hard separation between the MMIO and I/O port mappings
target-arm: add cpu feature EL3 to CPUs with Security Extensions
target-arm: Disable EL3 on unsupported machines
target-arm: Breakout integratorcp and versatilepb cpu init
target-arm: Set CPU has_el3 prop during virt init
target-arm: Enable CPU has_el3 prop during VE init
target-arm: Add arm_boot_info secure_boot control
target-arm: Add ARMCPU secure property
target-arm: Add feature unset function
target-arm: Add virt machine secure property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Conversion to tracepoints (Eric Auger)
- Fix memory listener address space (Frank Blaschka)
- Move to hw/vfio/ and split common vs pci (Eric Auger & Kim Phillips)
- Trivial error_report() fixes (Alex Williamson)
In addition to enabling S390 with the address space fix and updating
to use tracepoints rather than compile time debug, this set of patches
moves hw/misc/vfio.c to hw/vfio/ and paves the way for vfio-platform
support by splitting common functionality from PCI specific code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUmHzfAAoJECObm247sIsiZwwP/1vaePjmppn2iQkaS/eKssYc
aHNlQ+zteML0/MMGUsp2d76HinZTStGRAm0yHGQ46Z2XQ+4DT9iARzkferhJKfb9
jPblAg/ek08WqPvv3epXU81qj/sp0n9MjCz7PJPzSXpKngOaBS5vZp4HJt37+2Kk
4I3TzKGEaEoAk84Ba8AKp3xG3TcOdnIsg5Ht2cT20QmrGh0R8tXreGavC+ERpJ5/
59yIewpxxVNDYttD4bqRwyVPup1rpw/qK824cYFz3PWeFzix4rYg8aujr5BxqC5S
BL6WxHbNC75e8vNZ/toEZX41Dj3jRtXVP3ARCbU0h/5oboUZ+j94eVmRejeCkIor
G0uJjOT0NTILeq5ZrhGVl7/4reSFyO4EvhF6RDm/913iYJ9xwR1usHyTT3VbUwMh
3xnCHbGskxVrtdOLHd80o6uEycr4goQip8HP6Xg5YLWauoXHi5oAaOSIeyoHR7JH
CjnkdmgpSbqBijL+sgAHoRh4hh7hS1sXR4kqeXEdwqZj8be/5v3gb7R/yLlQZYvs
zAcE16a7CkTvki0f9uKsU2ZGhDE4AQaofB3EnKGSHvmMtGw6PoEDlZFcxtEjbfkl
RUW6FLxXDVp16wTQCckyT9XPAjsqSFXdiqOf25StR9iwiHDB29hK5JNzM9vTUv06
AiNWMlxwEYuHu09FKSYi
=CRNj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20141222.0' into staging
VFIO updates:
- Conversion to tracepoints (Eric Auger)
- Fix memory listener address space (Frank Blaschka)
- Move to hw/vfio/ and split common vs pci (Eric Auger & Kim Phillips)
- Trivial error_report() fixes (Alex Williamson)
In addition to enabling S390 with the address space fix and updating
to use tracepoints rather than compile time debug, this set of patches
moves hw/misc/vfio.c to hw/vfio/ and paves the way for vfio-platform
support by splitting common functionality from PCI specific code.
# gpg: Signature made Mon 22 Dec 2014 20:19:43 GMT using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
* remotes/awilliam/tags/vfio-update-20141222.0:
vfio: Cleanup error_report()s
hw/vfio: create common module
hw/vfio/pci: use name field in format strings
hw/vfio/pci: rename group_list into vfio_group_list
hw/vfio/pci: split vfio_get_device
hw/vfio/pci: Introduce VFIORegion
hw/vfio/pci: handle reset at VFIODevice
hw/vfio/pci: add type, name and group fields in VFIODevice
hw/vfio/pci: introduce minimalist VFIODevice with fd
hw/vfio/pci: generalize mask/unmask to any IRQ index
hw/vfio/pci: Rename VFIODevice into VFIOPCIDevice
vfio: move hw/misc/vfio.c to hw/vfio/pci.c Move vfio.h into include/hw/vfio
vfio: fix adding memory listener to the right address space
vfio: migration to trace points
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt board already ensures mutual exclusion between -bios and -pflash
unit#0; we only need to set "bootinfo.firmware_loaded", introduced in the
previous patch, if either of those options was used to load the guest
firmware.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-12-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the new boolean field "arm_boot_info.firmware_loaded". When this
field is set, it means that the portion of guest DRAM that the VCPU
normally starts to execute, or the pflash chip that the VCPU normally
starts to execute, has been populated by board-specific code with
full-fledged guest firmware code, before the board calls
arm_load_kernel().
Simultaneously, "arm_boot_info.firmware_loaded" guarantees that the board
code has set up the global firmware config instance, for arm_load_kernel()
to find with fw_cfg_find().
Guest kernel (-kernel) and guest firmware (-bios, -pflash) has always been
possible to specify independently on the command line. The following cases
should be considered:
nr -bios -pflash -kernel description
unit#0
-- ------- ------- ------- -------------------------------------------
1 present present absent Board code rejects this case, -bios and
present present present -pflash unit#0 are exclusive. Left intact
by this patch.
2 absent absent present Traditional kernel loading, with qemu's
minimal board firmware. Left intact by this
patch.
3 absent present absent Preexistent case for booting guest firmware
present absent absent loaded with -bios or -pflash. Left intact
by this patch.
4 absent absent absent Preexistent case for not loading any
firmware or kernel up-front. Left intact by
this patch.
5 present absent present New case introduced by this patch: kernel
absent present present image is passed to externally loaded
firmware in unmodified form, using fw_cfg.
An easy way to see that this patch doesn't interfere with existing cases
is to realize that "info->firmware_loaded" is constant zero at this point.
Which makes the "outer" condition unchanged, and the "inner" condition
(with the fw_cfg-related code) dead.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-11-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the next patch we'd like to reuse the image decompression facility
without installing the output as a ROM at a specific guest-phys address.
In addition, expose LOAD_IMAGE_MAX_GUNZIP_BYTES, because that's a
straightforward "max_sz" argument for the new load_image_gzipped_buffer().
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-10-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fw_cfg already supports exposure over MMIO (used in ppc/mac_newworld.c,
ppc/mac_oldworld.c, sparc/sun4m.c); we can easily add it to the "virt"
board.
Because MMIO access is slow on ARM KVM, we enable the guest, with
fw_cfg_init_mem_wide(), to transfer up to 8 bytes with a single access.
This has been measured to speed up transfers up to 7.5-fold, relative to
single byte data access, on both ARM KVM and x86_64 TCG.
The MMIO register block of fw_cfg is advertized in the device tree. As
base address we pick 0x09020000, which conforms to the comment preceding
"a15memmap": it falls in the miscellaneous device I/O range 128MB..256MB,
and it is aligned at 64KB. The DTB properties follow the documentation in
the Linux source file "Documentation/devicetree/bindings/arm/fw-cfg.txt".
fw_cfg automatically exports a number of files to the guest; for example,
"bootorder" (see fw_cfg_machine_reset()).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-9-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We rebase fw_cfg_init_mem() to the new function for compatibility with
current callers.
The behavior of the (big endian) multi-byte data reads is best shown
with a qtest session. Here, we are reading the first six bytes of
the UUID
$ arm-softmmu/qemu-system-arm -M virt -machine accel=qtest \
-qtest stdio -uuid 4600cb32-38ec-4b2f-8acb-81c6ea54f2d8
>>> writew 0x9020008 0x0200
<<< OK
>>> readl 0x9020000
<<< OK 0x000000004600cb32
Remember this is big endian. On big endian machines, it is stored
directly as 0x46 0x00 0xcb 0x32.
On a little endian machine, we have to first swap it, so that it becomes
0x32cb0046. When written to memory, it becomes 0x46 0x00 0xcb 0x32
again.
Reading byte-by-byte works too, of course:
>>> readb 0x9020000
<<< OK 0x0000000000000038
>>> readb 0x9020000
<<< OK 0x00000000000000ec
Here only a single byte is read at a time, so they are read in order
similar to the 1-byte data port that is already in PPC and SPARC
machines.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-8-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "data_width" property is capable of changing the maximum valid access
size to the MMIO data register, and resizes the memory region similarly,
at device realization time.
The default value of "data_memwidth" is set so that we don't yet diverge
from "fw_cfg_data_mem_ops".
Most of the fw_cfg_mem users will stick with the default, and for them we
should continue using the statically allocated "fw_cfg_data_mem_ops". This
is beneficial for debugging because gdb can resolve pointers referencing
static objects to the names of those objects.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-7-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Otherwise fw_cfg accesses are split into 4-byte ones before they reach the
fw_cfg ops / handlers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The standalone selector port (fw_cfg_ctl_mem_ops) is only used by big
endian guests to date (*), hence this change doesn't regress them. Paolo
and Alex have suggested / requested an explicit DEVICE_BIG_ENDIAN setting
here, for clarity.
(*) git grep -l fw_cfg_init_mem
hw/nvram/fw_cfg.c
hw/ppc/mac_newworld.c
hw/ppc/mac_oldworld.c
hw/sparc/sun4m.c
include/hw/nvram/fw_cfg.h
The standalone data port (fw_cfg_data_mem_ops) has max_access_size 1 (for
now), hence changing its endianness doesn't change behavior for existing
guest code.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make it clear that the maximum access size to the MMIO data register
determines the full size of the memory region.
Currently the max access size is 1.
This patch doesn't change behavior.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to drop the fw_cfg_init() shim and to enforce the possible
mappings at compile time.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to introduce a wide data register for fw_cfg, but only for
the MMIO mapped device. The wide data register will also require the
tightening of endiannesses.
However we don't want to touch the I/O port mapped fw_cfg device at all.
Currently QEMU provides a single fw_cfg device type that can handle both
I/O port and MMIO mapping. This flexibility is not actually exploited by
any board in the tree, but it renders restricting the above changes to
MMIO very hard.
Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and
TYPE_FW_CFG_MEM.
TYPE_FW_CFG_IO incorporates the base I/O port and the related combined
MemoryRegion. (NB: all boards in the tree that use the I/O port mapped
flavor opt for the combined mapping; that is, when the data port overlays
the high address byte of the selector port. Therefore we can drop the
capability to map those I/O ports separately.)
TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and
data registers, and their respective MemoryRegions.
The "realize" and "props" class members are specific to each new derived
class, and become unused for the base class. The base class retains the
"reset" member and the "vmsd" member, because the reset functionality and
the set of migrated data are not specific to the mapping.
The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the
possible mappings in separation. For now fw_cfg_init() is retained as a
compatibility shim that enforces the above assumptions.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disables the CPU ARM_FEATURE_EL3 featuere on machine models that can be
configured to use Cortex-A9, Cortex-A15, and ARM1176 but don't officially
support EL3. This preserves backwards compatibility.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-15-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit changes the integratorcp and versatilepb CPU initialization from
using the generic ARM cpu_arm_init function to doing it inline. This is
necessary in order to allow CPU configuration changes to occur between CPU
instance initialization and realization. Specifically, this change is in
preparation for disabling CPU EL3 support.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-14-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds setting of the CPU has_el3 property based on the virt machine
secure state property during initialization. This enables/disables EL3
state during start-up. Changes include adding an additional secure state
boolean during virt CPU initialization. Also disables the ARM secure boot
by default.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418684992-8996-13-git-send-email-greg.bellows@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds setting of the CPU has_el3 property based on the vexpress machine
secure state property during initialization. This enables/disables EL3
state during start-up. Changes include adding an additional secure state
boolean during vexpress CPU initialization. Also enables the ARM secure boot
by default.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418684992-8996-12-git-send-email-greg.bellows@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds the secure_boot boolean field to the arm_boot_info descriptor. This
fields is used to indicate whether Linux should boot into secure or non-secure
state if the ARM EL3 feature is enabled. The default is to leave the CPU in an
unaltered reset state. On EL3 enabled systems, the reset state is secure and
can be overridden by setting the added field to false.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-11-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added a "has_el3" state property to the ARMCPU descriptor. This property
indicates whether the ARMCPU has security extensions enabled (EL3) or not.
By default it is disabled at this time.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-10-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an unset_feature() function to compliment the set_feature() function. This
will be used to disable functions after they have been enabled during
initialization.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-9-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add "secure" virt machine specific property to allow override of the
default secure state configuration. By default, when using the QEMU
-kernel command line argument, virt machines boot into NS/SVC. When using
the QEMU -bios command line argument, virt machines boot into S/SVC.
The secure state can be changed from the default specifying the secure
state as a machine property. For example, the below command line would disable
security extensions on a -kernel Linux boot:
aarch64-softmmu/qemu-system-aarch64
-machine type=virt,secure=off
-kernel ...
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-8-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch virt qemu machine support to use the newer object type, class, and
instance model. Added virt TypeInfo with static registration along with virt
specific class and machine structs. Also added virt class initialization
method.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-7-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the Vexpress daughterboard initialization method to take a vexpress
machine state pointer instead of the daughterboard struct pointer. The machine
state now contains the daughterboard pointer.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-6-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add "secure" Vexpress machine specific property to allow override of the
default secure state configuration. By default, when using the QEMU
-kernel command line argument, Vexpress machines boot into NS/SVC. When using
the QEMU -bios command line argument, Vexpress machines boot into S/SVC.
The secure state can be changed from the default specifying the secure
state as a machine property. For example, the below command line would disable
security extensions on a -kernel Linux boot:
aarch64-softmmu/qemu-system-aarch64
-machine type=vexpress-a15,secure=off
-kernel ...
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-5-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switched the Vexpress machine initialization to use the common function with
the machine pointer to board info.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Vexpress machine objects for the the Cortex A9 & A15 variants. The older
style QEMUMachine types were replaced with dedicated TypeInfo objects. The new
objects include dedicated class init functions that currently ustilze dedicated
machine init methods. The previous qemu_register_machine calls were replaced
with the newer type_register_status calls.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-3-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds base Vexpress class and machine objects and infrastructure. This is in
preparation for switching to the full QEMU object model. The base vexpress
infrastructure is intended to handle common vexpress details.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The help is based on the actual machine properties
exposing only the relevant options.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418217570-15517-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU has support for options per machine, keeping
a global list of options is no longer necessary.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418217570-15517-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge of the v8_el2_cp_reginfo and el3_cp_reginfo ARMCPRegInfo lists.
Previously, some EL3 registers were restricted to the ARMv8 list under the
impression that they were not needed on ARMv7. However, this is not the case
as the ARMv7/32-bit variants rely on the ARMv8/64-bit variants to handle
migration and reset. For this reason they must always exist.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1418406450-14961-1-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When stopping an audio voice, call the audio backend's fini
method before calling audio_pcm_hw_free_resources_ rather than
afterwards. This allows backends which use helper threads (like
pulseaudio) to terminate those threads before the conv_buf or
mix_buf are freed and avoids race conditions where the helper
may access a NULL pointer or freed memory.
Cc: qemu-stable@nongnu.org
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418406239-9838-1-git-send-email-peter.maydell@linaro.org
With the conversion to tracepoints, a couple previous DPRINTKs are
now quite a bit more visible and are really just informational.
Remove these and add a bit more description to another.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A new common module is created. It implements all functions
that have no device specificity (PCI, Platform).
This patch only consists in move (no functional changes)
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_get_device now takes a VFIODevice as argument. The function is split
into 2 parts: vfio_get_device which is generic and vfio_populate_device
which is bus specific.
3 new fields are introduced in VFIODevice to store dev_info.
vfio_put_base_device is created.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This structure is going to be shared by VFIOPCIDevice and
VFIOPlatformDevice. VFIOBAR includes it.
vfio_eoi becomes an ops of VFIODevice specialized by parent device.
This makes possible to transform vfio_bar_write/read into generic
vfio_region_write/read that will be used by VFIOPlatformDevice too.
vfio_mmap_bar becomes vfio_map_region
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since we can potentially have both PCI and platform devices in
the same VFIO group, this latter now owns a list of VFIODevices.
A unified reset handler, vfio_reset_handler, is registered, looping
through this VFIODevice list. 2 specialized operations are introduced
(vfio_compute_needs_reset and vfio_hot_reset_multi): they allow to
implement type specific behavior. also reset_works and needs_reset
VFIOPCIDevice fields are moved into VFIODevice.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add 3 new fields in the VFIODevice struct. Type is set to
VFIO_DEVICE_TYPE_PCI. The type enum value will later be used
to discriminate between VFIO PCI and platform devices. The name is
set to domain🚌slot:function. Currently used to test whether
the device already is attached to the group. Later on, the name
will be used to simplify all traces. The group is simply moved
from VFIOPCIDevice to VFIODevice.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
[Fix g_strdup_printf() usage]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=7DhE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bkoppelmann/tags/pull-tricore-20141221' into staging
TriCore RR, RR1 insn added and several bug fixes
# gpg: Signature made Sun 21 Dec 2014 18:39:11 GMT using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"
* remotes/bkoppelmann/tags/pull-tricore-20141221:
target-tricore: Add instructions of RR1 opcode format, that have 0xb3 as first opcode
target-tricore: Fix MFCR/MTCR insn and B format offset.
target-tricore: Add missing 1.6 insn of BOL opcode format
target-tricore: Add instructions of RR opcode format, that have 0x4b as the first opcode
target-tricore: Add instructions of RR opcode format, that have 0x1 as the first opcode
target-tricore: Add instructions of RR opcode format, that have 0xf as the first opcode
target-tricore: Add instructions of RR opcode format, that have 0xb as the first opcode
target-tricore: Change SSOV/SUOV makro name to SSOV32/SUOV32
target-tricore: Fix mask handling JNZ.T being 7 bit long
target-tricore: pretty-print register dump and show more status registers
target-tricore: add missing 64-bit MOV in RLC format
target-tricore: typo in BOL format
target-tricore: fix offset masking in BOL format
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
For x86 architecture, we pass &local_err to set_boot_dev()
when vm startup in pc_coms_init().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
