The number of actual invocations of ctpop itself does not warrent
an opcode, but it is very helpful for POWER7 to use in generating
an expansion for ctz.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The number of actual invocations does not warrent an opcode,
and the backends generating it. But at least we can eliminate
redundant helpers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The ISA manual documents the output is undefined if the input was zero.
However, we document in target-i386 that the behavior of real silicon
is to preserve the contents of the output register. We also mention
that there are real applications that depend on this. That this is
baked into silicon is mentioned as a potential cause for some false
sharing behaviour wrt lzcnt/tzcnt.
Taking advantage of this allows us to save 2 insns in the normal case,
and 4 insns for i686 emulating a 64-bit clz.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Previously we could not have different constraints for different ISA levels,
which prevented us from eliding the matching constraint for shifts.
We do now have to make sure that the operands match for constant shifts.
We can also handle some small left shifts via lea.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Use a switch instead of searching a table. Share constraints between
32-bit and 64-bit, when at all possible.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows an output operand to match an input operand
only when the input operand needs a register.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will let us choose how to interpret a given constraint
depending on whether the opcode is 32- or 64-bit. Which will
let us share more constraint combinations between opcodes.
At the same time, change the interface to return the advanced
pointer instead of passing it in/out by reference.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will allow the target to tailor the constraints to the
auto-detected ISA extensions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is the same concept as, and same markup as, the
early clobber markup in gcc.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since we can no longer use matching constraints, this does
mean we must handle that data movement by hand.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This lets us expose facilities to TCG_TARGET_HAS_* defines
directly, rather than hiding behind function calls.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows us to use this detection within the TCG_TARGET_HAS_*
macros, instead of requiring a function call into tcg-target.inc.c.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While we don't require a new opcode, it is handy to have an expander
that knows the first source is zero.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Assert that len is not 0.
Since we have asserted that ofs + len <= N, a later
check for len == N implies that ofs == 0.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Adds tcg_gen_extract_* and tcg_gen_sextract_* for extraction of
fixed position bitfields, much like we already have for deposit.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Take stack frame parameters out from the function body.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <1483592275-4496-8-git-send-email-jinguojie@loongson.cn>
tcg_out_ldst: using a generic ALIAS_PADD to avoid ifdefs
tcg_out_ld: generates LD or LW
tcg_out_st: generates SD or SW
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <1483592275-4496-7-git-send-email-jinguojie@loongson.cn>
tcg_out_mov: using OPC_OR as most mips assemblers do;
tcg_out_movi: extended to 64-bit immediate.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <1483592275-4496-6-git-send-email-jinguojie@loongson.cn>
Without the mips32r2 instructions to perform swapping, bswap is quite large,
dominating the size of each reverse-endian qemu_ld/qemu_st operation.
Create two subroutines in the prologue block. The subroutines require extra
reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that
we need not place additional restrictions on the qemu_ld outputs.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <1483592275-4496-5-git-send-email-jinguojie@loongson.cn>
Bulk patch adding 64-bit opcodes into tcg_out_op. Note that
mips64 is as yet neither complete nor enabled.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <1483592275-4496-4-git-send-email-jinguojie@loongson.cn>
Since the mips manual tables are in octal, reorg all of the opcodes
into that format for clarity. Note that the 64-bit opcodes are as
yet unused.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <1483592275-4496-3-git-send-email-jinguojie@loongson.cn>
Without the mips32r2 instructions to perform swapping, bswap is quite large,
dominating the size of each reverse-endian qemu_ld/qemu_st operation.
Create a subroutine in the prologue block. The subroutine requires extra
reserved registers (TCG_TMP[2, 3]). Using these within qemu_ld means that
we need not place additional restrictions on the qemu_ld outputs.
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: YunQiang Su <wzssyqa@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jin Guojie <jinguojie@loongson.cn>
Message-Id: <1483592275-4496-2-git-send-email-jinguojie@loongson.cn>
We can't use LOAD AND TEST for unsigned data and then expect to
extract the result with ADD LOGICAL WITH CARRY. Fall through to
using COMPARE LOGICAL IMMEDIATE instead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The version of tcg_gen_ld8s_i64 for 32-bit systems does a load into
the low part of the return value - then attempts a sign extension into
the high part, but wrongly sets the high part to a sign extension of
itself rather than of the low part. This results in TCG internal
errors from the use of the uninitialized high part (in some GCC tests
of AArch64 NEON shift intrinsics, in particular). This patch corrects
the sign-extension logic, making it match other functions such as
tcg_gen_ld16s_i64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.20.1610272333560.22353@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The typedefs we use for the TCGv_i32, TCGv_i64 and TCGv_ptr
types are somewhat confusing, because we define them as
pointers to structs, but the structs themselves are never
defined. Explain in the comments a bit more clearly why
this is OK and what is going on under the hood.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1477067922-26202-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This multiply has one signed input and one unsigned input,
producing the full double-width result.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1475011433-24456-2-git-send-email-rth@twiddle.net>
Reuse the existing locking provided by stdio to keep in_asm, cpu,
op, op_opt, op_ind, and out_asm as contiguous blocks.
While it isn't possible to interleave e.g. in_asm or op_opt logs
because of the TB lock protecting all code generation, it is
possible to interleave cpu logs, or to interleave a cpu dump with
an out_asm dump.
For mingw32, we appear to have no viable solution for this. The locking
functions are not properly exported from the system runtime library.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
softmmu requires more functions to be thread-safe, because translation
blocks can be invalidated from e.g. notdirty callbacks. Probably the
same holds for user-mode emulation, it's just that no one has ever
tried to produce a coherent locking there.
This patch will guide the introduction of more tb_lock and tb_unlock
calls for system emulation.
Note that after this patch some (most) of the mentioned functions are
still called outside tb_lock/tb_unlock. The next one will rectify this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-7-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
