I'm not trying too hard yet. Later, with multiqueue support,
this may cause mutex contention or cacheline bouncing.
Cc: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-20-pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
block_acct_destroy is called unconditionally in blk_delete, but there is
no BlockAcctStats function that is called unconditionally in blk_new.
Split block_acct_init in two, so that it will be possible to create a
QemuMutex in block_acct_init and destroy it in block_acct_cleanup.
Cc: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-19-pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This module provides fast paths for 64-bit atomic operations on machines
that only have 32-bit atomic access.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170605123908.18777-11-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Another possibility is to use tg->lock, which we're holding anyway in
both schedule_next_request and throttle_group_co_io_limits_intercept.
This would require open-coding the CoQueue however, so I've chosen this
alternative.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-10-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
That typedefs are needed on both files. New compilers (F25 where I
work) don't complain about repeating a typedef. But older ones
complain.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
We change the restoration priority of both the GICv3 and ITS. The
GICv3 must be restored before the ITS and the ITS needs to be restored
before PCIe devices since it translates their MSI transactions.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1497023553-18411-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to handle both registers and ITS tables. While
register handling is standard, ITS table handling is more
challenging since the kernel API is devised so that the
tables are flushed into guest RAM and not in vmstate buffers.
Flushing the ITS tables on device pre_save() is too late
since the guest RAM is already saved at this point.
Table flushing needs to happen when we are sure the vcpus
are stopped and before the last dirty page saving. The
right point is RUN_STATE_FINISH_MIGRATE but sometimes the
VM gets stopped before migration launch so let's simply
flush the tables each time the VM gets stopped.
For regular ITS registers we just can use vmstate pre_save()
and post_load() callbacks.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1497023553-18411-3-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In some circumstances, we don't want to abort if the
kvm_device_access fails. This will be the case during ITS
migration, in case the ITS table save/restore fails because
the guest did not program the vITS correctly. So let's pass an
error object to the function and return the ioctl value. New
callers will be able to make a decision upon this returned
value.
Existing callers pass &error_abort which will cause the
function to abort on failure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 1497023553-18411-2-git-send-email-eric.auger@redhat.com
[PMM: wrapped long line]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested and confirmed that the stretch i386 debian qcow2 image on a
raspberry pi 2 works.
Fixes: LP#: 893208 <https://bugs.launchpad.net/qemu/+bug/893208/>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170418191817.10430-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before QOM-ifying the Exynos4 SoC model, move the DRAM initialization
from exynos4210.c to exynos4_boards.c because DRAM is board specific,
not SoC.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This batch contains more patches to rework the pseries machine hotplug
infrastructure, plus an assorted batch of bugfixes.
It contains a start on fixes to restore migration from older machine
types on older versions which was broken by some xics changes. There
are still a few missing pieces here, though.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=a4tH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170609' into staging
ppc patch queue 2017-06-09
This batch contains more patches to rework the pseries machine hotplug
infrastructure, plus an assorted batch of bugfixes.
It contains a start on fixes to restore migration from older machine
types on older versions which was broken by some xics changes. There
are still a few missing pieces here, though.
# gpg: Signature made Fri 09 Jun 2017 06:26:03 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170609:
Revert "spapr: fix memory hot-unplugging"
xics: drop ICPStateClass::cpu_setup() handler
xics: setup cpu at realize time
xics: pass appropriate types to realize() handlers.
xics: introduce macros for ICP/ICS link properties
hw/cpu: core.c can be compiled as common object
hw/ppc/spapr: Adjust firmware name for PCI bridges
xics: add reset() handler to ICPStateClass
pnv_core: drop reference on ICPState object during CPU realization
spapr: Rework DRC name handling
spapr: Fold spapr_phb_{add,remove}_pci_device() into their only callers
spapr: Change DRC attach & detach methods to functions
spapr: Clean up handling of DR-indicator
spapr: Clean up RTAS set-indicator
spapr: Don't misuse DR-indicator in spapr_recover_pending_dimm_state()
spapr: Clean up DR entity sense handling
pseries: Correct panic behaviour for pseries machine type
spapr: fix memory leak in spapr_memory_pre_plug()
target/ppc: fix memory leak in kvmppc_is_mem_backend_page_size_ok()
target/ppc: pass const string to kvmppc_is_mem_backend_page_size_ok()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZOZ+4AAoJECgfDbjSjVRpToYH/1vHgbv2dLtZTJm3BdBRKYWS
9oWt4drT9TdbzYL6u3zxQd6oT0FPLXKkx3ruhBtfc3GoEGO2UWGgJLEXWCLSH/pK
71iKgCB9Yr4IErjI569/fyeKS48wFEsZihzj+iQBns7gQGTbUO/GewaWV8q6CRzC
nKY8g9Z1ajH/eufgV6iSitnReAoaere4kod/5Qa5R0i/JvEx010Pe6kjQT1TYCcB
GhSe0hSIInqOYWkMt8v+2LQlAGXdopjmjcaYD/b1/IVKu2xdVPRvXNYmW9CBbMrx
xVWXQ8pNzjrJdfJZTZhAW/lkhx+AlG4KIAzOnMslTYuZ8E84ioafkmumNFPHrBw=
=TjdI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, vhost: fixes
Some fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 08 Jun 2017 20:04:24 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
hw/pcie: fix the generic pcie root port to support migration
nvdimm acpi: fix region format interface code
vhost-user-bridge: fix iov_restore_front() warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nothing uses it outside of migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
So, move them there. Notice that we export functions that send
commands, not the command themselves.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
It was not from vmstate.c to start with.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
They are indpendent, and nowadays almost every device register things
with qdev->vmsd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>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=CXN6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/char-pull-request' into staging
# gpg: Signature made Thu 08 Jun 2017 15:12:11 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/char-pull-request:
test-char: start a /char/serial test
chardev: don't use alias names in parse_compat()
char: fix alias devices regression
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit fe6824d126.
Conflicts hw/ppc/spapr_drc.c, because get_index() has been renamed
spapr_get_index().
This didn't fix the problem. Once the hotplug has been started
some memory is allocated and some structures are allocated.
We don't free it when we ignore the unplug, and we can't because
they can be in use by the kernel.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cpu_setup() handler is only implemented by xics_kvm, where it really
does a typical "realize" job. Moreover, the realize() handler is called
shortly after cpu_setup(), on the same path.
This patch converts xics_kvm to implement realize() instead of cpu_setup().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until recently, spapr used to allocate ICPState objects for the lifetime
of the machine. They would only be associated to vCPUs in xics_cpu_setup()
when plugging a CPU core.
Now that ICPState objects have the same lifecycle as vCPUs, it is
possible to associate them during realization.
This patch hence open-codes xics_cpu_setup() in icp_realize(). The vCPU
is passed as a property. Note that vCPU now needs to be realized first
for the IRQs to be allocated. It also needs to resetted before ICPState
realization in order to synchronize with KVM.
Since ICPState objects are freed when unrealized, xics_cpu_destroy() isn't
needed anymore and can be safely dropped.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It makes more sense to pass an IPCState * to handlers of ICPStateClass
instead of a DeviceState *, if only to benefit from compile time type
checking. The same goes with ICSStateClass.
While here, we also change the declaration of ICPStateClass in xics.h
for consistency.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These properties are part of the XICS API. They deserve to appear
explicitely in the XICS header file.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add msix state to pcie-root-ports's vmstate
in order to support migration.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix regression from commit 4d43a603c7, where the serial and parallel
headers got removed from char.c, which broke the alias table.
Move the HAVE_CHARDEV_SERIAL/HAVE_CHARDEV_PARPORT to osdep.h instead
of being in separate headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Taking into account that qemu_set_irq() returns immediatly if its first
argument is NULL, icp_kvm_reset() largely duplicates icp_reset().
This patch introduces a reset() handler, so that the common logic can
be implemented in icp_reset() only.
While there we can also drop icp_kvm_realize() and icp_kvm_unrealize(). This
causes icp-kvm to be realized in icp_realize(), which sets icp->xics, but
it has no impact.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
DRC objects have a get_name method which returns the DRC name generated
when the DRC is created. Replace that with a fixed spapr_drc_name()
function which generates the name on the fly from other information. This
means:
* We get rid of a method with only one implementation, and only local
callers
* We don't have to carry the name string around for the lifetime of the
DRC
* We use information added to the class structure to generate the name
in standard format, so we don't need an explicit switch on drc type
any more
We also eliminate the 'name' property; it's basically useless since the
only information in it can easily be deduced from other things.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
DRC objects have attach & detach methods, but there's only one
implementation. Although there are some differences in its behaviour for
different DRC types, the overall structure is the same, so while we might
want different method implementations for some parts, we're unlikely to
want them for the top-level functions.
So, replace them with direct function calls.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
There are 3 types of "indicator" associated with hotplug in the PAPR spec
the "allocation state", "isolation state" and "DR-indicator". The first
two are intimately tied to the various state transitions associated with
hotplug. The DR-indicator, however, is different and simpler.
It's basically just a guest controlled variable which can be used by the
guest to flag state or problems associated with a device. The idea is that
the hypervisor can use it to present information back on management
consoles (on some machines with PowerVM it may even control physical LEDs
on the machine case associated with the relevant device).
For that reason, there's only ever likely to be a single update
implementation so the set_indicator_state method isn't useful. Replace it
with a direct function call.
While we're there, make some small associated cleanups:
* PAPR doesn't use the term "indicator state", just "DR-indicator" and
the allocation state and isolation state are also considered "indicators".
Rename things to be less confusing
* Fold set_indicator_state() and rtas_set_indicator_state() into a single
rtas_set_dr_indicator() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
DRC classes have an entity_sense method to determine (in a specific PAPR
sense) the presence or absence of a device plugged into a DRC. However,
we only have one implementation of the method, which explicitly tests for
different DRC types. This changes it to instead have different method
implementations for the two cases: "logical" and "physical" DRCs.
While we're at it, the entity sense method always returns RTAS_OUT_SUCCESS,
and the interesting value is returned via pass-by-reference. Simplify this
to directly return the value we care about
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Move to modern errp scheme from just LOGging errors.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170526110913.89098-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Will be used in following patch to provide actual error message in
some cases.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170516094533.6160-4-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
