The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 230bf719d3)
The 9P spec at http://man.cat-v.org/plan_9/5/intro says:
All directories must support walks to the directory .. (dot-dot) meaning
parent directory, although by convention directories contain no explicit
entry for .. or . (dot). The parent of the root directory of a server's
tree is itself.
This means that a client cannot walk further than the root directory
exported by the server. In other words, if the client wants to walk
"/.." or "/foo/../..", the server should answer like the request was
to walk "/".
This patch just does that:
- we cache the QID of the root directory at attach time
- during the walk we compare the QID of each path component with the root
QID to detect if we're in a "/.." situation
- if so, we skip the current component and go to the next one
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the 9P spec http://man.cat-v.org/plan_9/5/open about the
create request:
The names . and .. are special; it is illegal to create files with these
names.
This patch causes the create and lcreate requests to fail with EINVAL if
the file name is either "." or "..".
Even if it isn't explicitly written in the spec, this patch extends the
checking to all requests that may cause a directory entry to be created:
- mknod
- rename
- renameat
- mkdir
- link
- symlink
The unlinkat request also gets patched for consistency (even if
rmdir("foo/..") is expected to fail according to POSIX.1-2001).
The various error values come from the linux manual pages.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Empty path components don't make sense for most commands and may cause
undefined behavior, depending on the backend.
Also, the walk request described in the 9P spec [1] clearly shows that
the client is supposed to send individual path components: the official
linux client never sends portions of path containing the / character for
example.
Moreover, the 9P spec [2] also states that a system can decide to restrict
the set of supported characters used in path components, with an explicit
mention "to remove slashes from name components".
This patch introduces a new name_is_illegal() helper that checks the
names sent by the client are not empty and don't contain unwanted chars.
Since 9pfs is only supported on linux hosts, only the / character is
checked at the moment. When support for other hosts (AKA. win32) is added,
other chars may need to be blacklisted as well.
If a client sends an illegal path component, the request will fail and
ENOENT is returned to the client.
[1] http://man.cat-v.org/plan_9/5/walk
[2] http://man.cat-v.org/plan_9/5/intro
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reproducer:
CFLAGS="-g3 -O0" ./configure --target-list=aarch64-softmmu,arm-softmmu --enable-vhost-net --enable-virtfs
Here CFLAGS ends up with "-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -g3 -O0"
and pc-bios/optionrom/Makefile forgets to add the -O2 it needs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 7e8449594c, the socket connect code is blocking, because
calling socket_connect() without callback is blocking. This reverts the
commit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tb_flush does all kind of things, which are very tcg specific. As it
is called from some places even for KVM (e.g. gdb server) it is better
to detect these cases and do an early exit.
This also fixes a crash in the gdb server that was triggered by
commit 909eaac9bb ("tb hash: track translated blocks with qht").
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@twiddle.net>
Reported-by: Brent Baccala <cosine@freesoft.org>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1472148686-39841-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In previous commit
commit c7628bff41
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Fri Oct 30 12:10:09 2015 +0100
vnc: only alloc server surface with clients connected
the VNC server was changed so that the 'vd->server' pixman
image was only allocated when a client is connected.
Since then if a client disconnects and then reconnects to
the VNC server all they will see is a black screen until
they do something that triggers a refresh. On a graphical
desktop this is not often noticed since there's many things
going on which cause a refresh. On a plain text console it
is really obvious since nothing refreshes frequently.
The problem is that the VNC server didn't update the guest
dirty bitmap, so still believes its server image is in sync
with the guest contents.
To fix this we must explicitly mark the entire guest desktop
as dirty after re-creating the server surface. Move this
logic into vnc_update_server_surface() so it is guaranteed
to be call in all code paths that re-create the surface
instead of only in vnc_dpy_switch()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Tested-by: Peter Lieven <pl@kamp.de>
Message-id: 1471365032-18096-1-git-send-email-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Must include "qemu-version.h" for the QEMU_PKGVERSION definition.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1471877833-52343-1-git-send-email-emaste@freebsd.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again. It's necessary to decrement vq->inuse to avoid "leaking"
the element count.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vq->inuse field is not migrated. Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.
At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements. For these devices we need to recalculate
vq->inuse upon load so the value is correct.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJXurKIAAoJEO8Ells5jWIRUaAIAKy9h8aIpBV9JH7aeXmjbA8i
WQGOOf1piiPjCayhfLOk0852MWYlGtTHRvJ4BkxK0ek+WeGnS7871QmfIE+VdZMt
6fjYCzkQ2B5UQhqoahAbCNsCGrqxivHkLp9rl7nBm5gABowLGERfQzyVZ6fzwnqA
EO05SSA09WfIi/F4JvklG3w+Iy8dprzq8UgzLaX2EoallYa3dkeJtB4yvF9Qikok
Jz3uMTM2lOkWB6ccnDNGIYNJLsT3Q0mDnQ6y8mjv4zQambYPyd8W4iEOgtyk+sFJ
+CYbZmpUsXAYgI0YNlukmfG/U3n2jCN043aTNmwfRzATi2qYXO95bohftjaFXck=
=waIl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 22 Aug 2016 09:06:32 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
e1000e: remove internal interrupt flag
slirp: fix segv when init failed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX
is not necessary too, remove it now. And interrupt flag field intr_state also
can be removed now.
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since commit f6c2e66ae8, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:
==18447== Invalid write of size 8
==18447== at 0x7EF2B5: notifier_remove (notify.c:32)
==18447== by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447== by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447== by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447== by 0x69445B: qemu_del_net_client (net.c:401)
==18447== by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447== by 0x6A4241: net_init_slirp (slirp.c:865)
==18447== by 0x695C6D: net_client_init1 (net.c:1051)
==18447== by 0x695F6E: net_client_init (net.c:1108)
==18447== by 0x696DBA: net_init_netdev (net.c:1498)
==18447== by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447== by 0x696E60: net_init_clients (net.c:1516)
==18447== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since f6880b7f [qemu-log: support simple pid substitution for logs],
test-logging creates files with hard-coded names in /tmp. In the best
case, this prevents multiple developers from running "make check" on
the same machine. In the worst case, it allows for symlink attacks,
enabling an attacker to overwrite files that are writable to the
developer running "make check".
Instead of hard-coding the paths, create a temporary directory using
g_dir_make_tmp() and clean it up afterwards.
Fixes: f6880b7f ("qemu-log: support simple pid substitution for logs")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're going to make use of g_dir_make_tmp() in test-logging. Provide a
compatibility implementation of it for glib < 2.30.
May behave differently in some edge cases (e.g. pattern only at the
end of the template, the file name is not part of the error message),
but good enough in practice.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-2-git-send-email-silbe@linux.vnet.ibm.com
[PMM: removed variable "template" which caused compilation failures
when C++ files include glib-compat.h]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 9c37146782 I've tried to fix a broken build with older
linux-headers. However, I didn't do it properly. The solution
implemented here is to grab the enums that caused the problem
initially, and rename their values so that they are "QEMU_"
prefixed. In order to guarantee matching values with actual
enums from linux-headers, the enums are seeded with starting
values from the original enums.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fix I've made there was wrong. I mean, basically what I did
there was equivalent to:
#if 0
some code;
#endif
This reverts commit 9c37146782.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 40d61349e445c1ad5fef795da704bf7ed6e19c86.1471593869.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch reduce CPU usage of flush operations a bit. When we have one
flush completed we should kick only next operation. We should not start
all pending operations in the hope that they will go back to wait on
wait_queue.
Also there is a technical possibility that requests will get reordered
with the previous approach. After wakeup all requests are removed from
the wait queue. They become active and they are processed one-by-one
adding to the wait queue in the same order. Though new flush can arrive
while all requests are not put into the queue.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Message-id: 1471457214-3994-3-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following commit
commit 3ff2f67a7c
Author: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Date: Mon Jul 18 22:39:52 2016 +0300
block: ignore flush requests when storage is clean
has introduced a regression.
There is a problem that it is still possible for 2 requests to execute
in non sequential fashion and sometimes this results in a deadlock
when bdrv_drain_one/all are called for BDS with such stalled requests.
1. Current flushed_gen and flush_started_gen is 1.
2. Request 1 enters bdrv_co_flush to with write_gen 1 (i.e. the same
as flushed_gen). It gets past flushed_gen != flush_started_gen and
sets flush_started_gen to 1 (again, the same it was before).
3. Request 1 yields somewhere before exiting bdrv_co_flush
4. Request 2 enters bdrv_co_flush with write_gen 2. It gets past
flushed_gen != flush_started_gen and sets flush_started_gen to 2.
5. Request 2 runs to completion and sets flushed_gen to 2
6. Request 1 is resumed, runs to completion and sets flushed_gen to 1.
However flush_started_gen is now 2.
From here on out flushed_gen is always != to flush_started_gen and all
further requests will wait on flush_queue. This change replaces
flush_started_gen with an explicitly tracked active flush request.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1471457214-3994-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJXtUlQAAoJEO8Ells5jWIRMF4H/1zLZluPiCl4JfSH6vXY20cz
HU9efNm034qwnZXPd0716qIhwuz6VyXvRVMxeXVhEkh4srx3Z0H2MPPViPWQ4IWn
WLnO/Bz3UrXV0rHWvgwEW5RlTTxdr2fWVwXDsxdCHOMIzcHJ1YVXfgMeAvIceQoc
YvNNFRKORrlmbeHOVxS/p9CmhixXbmIryxNNWVXAm1BNJkkqu+FkOUgSvx6RowkM
ww8SuX+dpbhHgv5HJVCp0D3C/QQthrZJkr6S4u8yreK8rrXb4ZMTKlg1GY9oRhfU
nNThHOH/ql1tTSgPEDT8KbtXRJshADGygiVjElDfsDy/+acdIR5OgWPlVf52FU4=
=21z1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 18 Aug 2016 06:36:16 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/net: properly handle multiple packets in net_fill_rstate()
net: vmxnet: use g_new for pkt initialisation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter,
This is the single patch that stalls patchew's mingw testing. Since it
is small and trivial, let's have it in 2.7.
Fam
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXtFUBAAoJEMo1YkxqkXHG1OsIAIGGo1tj7RyAQyAwbfhm8D/q
jwR4riYrxHp7Kv08vebXVyjkfhfEws38lA0UpkT6yYX7m9xt8yuQfXOzGa2wONgl
sMSPH/tZr+LKl/ydsWtMlpaOgQyHXmK68sX7c6PFwboq9bvyA4+lBmYrwCYSSXCy
TgmQGE6dB1DqvvXzXkiGUkXpocSKvhoCYOrEHv63b1K450m08ErJeAa4TNYd2B51
2XcVs3pNTaktAy63BkqDOvNYE2QeWnSQm5MYhG+lrr3ML3nqrxxZJUIsgrz9VPfq
ce08c9+iErJM6C08uOBPcJM3AcERmnzDButBm6YPTglEHUA/lmCD9bAijosRy+c=
=XBcZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/docker-pull-request' into staging
Fix 'make docker-test-mingw@fedora'
Peter,
This is the single patch that stalls patchew's mingw testing. Since it
is small and trivial, let's have it in 2.7.
Fam
# gpg: Signature made Wed 17 Aug 2016 13:13:53 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-pull-request:
curl: Cast fd to int for DPRINTF
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When network is busy, we will receive multiple packets at one time. In
that situation, we should keep trying to do the receiving instead of
finalizing only the first packet.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When network transport abstraction layer initialises pkt, the maximum
fragmentation count is not checked. This could lead to an integer
overflow causing a NULL pointer dereference. Replace g_malloc() with
g_new() to catch the multiplication overflow.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently "make docker-test-mingw@fedora" has a warning like:
/tmp/qemu-test/src/block/curl.c: In function 'curl_sock_cb':
/tmp/qemu-test/src/block/curl.c:172:6: warning: format '%d' expects
argument of type 'int', but argument 4 has type 'curl_socket_t {aka long
long unsigned int}'
DPRINTF("CURL (AIO): Sock action %d on fd %d\n", action, fd);
^
cc1: all warnings being treated as errors
Cast to int to suppress it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1470027888-24381-1-git-send-email-famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The llseek syscall takes two 32-bit arguments, offset_high
and offset_low, which must be combined to form a single
64-bit offset. Unfortunately we were combining them with
(uint64_t)arg2 << 32) | arg3
and arg3 is a signed type; this meant that when promoting
arg3 to a 64-bit type it would be sign-extended. The effect
was that if the offset happened to have bit 31 set then
this bit would get sign-extended into all of bits 63..32.
Explicitly cast arg3 to abi_ulong to avoid the erroneous
sign extension.
Reported-by: Chanho Park <parkch98@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Chanho Park <parkch98@gmail.com>
Message-id: 1470938379-1133-1-git-send-email-peter.maydell@linaro.org
In c5dff280 we tried to make us understand netlink messages more.
So we've added a code that does some translation. However, the
code assumed linux-headers to be at least version 4.4 of it
because most of the symbols there (if not all of them) were added
in just that release. This, however, breaks build on systems with
older versions of the package.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id: 23806aac6db3baf7e2cdab4c62d6e3468ce6b4dc.1471340849.git.mprivozn@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
input-send-event is now stable since
6575ccddf4.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20160811112041.18616-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The kvm_pv_unhalt feature doesn't work if kernel_irqchip is
disabled, so we need to report it as unsupported.
Tested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
struct arphdr is already used by the system headers on OpenBSD
and thus QEMU does not compile here anymore. Fix it by renaming
our struct to slirp_arphdr instead.
Reported-by: Brad Smith
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com
Buglink: https://bugs.launchpad.net/qemu/+bug/1613133
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit d7a04fd7d5, tcp_chr_wait_connected() was introduced,
so vhost-user could wait until a backend started successfully. In
vhost-user case, the chr socket must be plain unix, and the chr+vhost
setup happens synchronously during qemu startup.
However, with TLS and telnet socket, initial socket setup happens
asynchronously, and s->connected is not set after the socket is
accepted. In order for tcp_chr_wait_connected() to not keep accepting
new connections and proceed with the last accepted socket, it can
check for s->ioc instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20160816083332.15088-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-gpu.h file defines a macro VIRTIO_GPU_FILL_CMD
which includes a call to qemu_log_mask, but does not
include qemu/log.h. In a default configure, it is lucky
and gets qemu/log.h indirectly due to the 'log' trace
backend being enabled. If that trace backend is disabled
though, eg
./configure --enable-trace-backends=nop
Then the build will fail:
In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0:
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c: In function ‘virgl_cmd_create_resource_2d’:
/home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:13: error: implicit declaration of function ‘qemu_log_mask’ [-Werror=implicit-function-declaration]
qemu_log_mask(LOG_GUEST_ERROR, \
^
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: note: in expansion of macro ‘VIRTIO_GPU_FILL_CMD’
VIRTIO_GPU_FILL_CMD(c2d);
^~~~~~~~~~~~~~~~~~~
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: error: nested extern declaration of ‘qemu_log_mask’ [-Werror=nested-externs]
In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0:
/home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:27: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function)
qemu_log_mask(LOG_GUEST_ERROR, \
[snip many more errors]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1470648700-3474-1-git-send-email-berrange@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since
commit a9c87304b7 ("build-sys: fix building with make CFLAGS=.. argument")
pc-bios/s390-ccw.img build might fail with
--- snip ---
main.o: In function `virtio_setup':
qemu/pc-bios/s390-ccw/main.c:117: undefined reference to `__stack_chk_fail'
--- snip ---
Changing the CFLAGS to QEMU_CFLAGS does the trick. We also need to
add -fno-strict-aliasing as this was filtered out.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1471258997-5811-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Jm4E
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160815' into staging
ppc patch queue for 2016-08-15
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
# gpg: Signature made Mon 15 Aug 2016 07:46:36 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160815:
ppc: parse cpu features once
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The various host OSes are irritatingly variable about the name
of the linker emulation we need to pass to ld's -m option to
build the i386 option ROMs. Instead of doing this via a
CONFIG ifdef, check in configure whether any of the emulation
names we know about will work and pass the right answer through
to the makefile. If we can't find one, we fall back to not trying
to build the option ROMs, in the same way we would for a non-x86
host platform.
This is in particular necessary to unbreak the build on OpenBSD,
since it wants a different answer to FreeBSD and we don't have
an existing CONFIG_ variable that distinguishes the two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sean Bruno <sbruno@freebsd.org>
Message-id: 1470672688-6754-1-git-send-email-peter.maydell@linaro.org
Change the flag type to 'uint8_t' to fix the implicit conversion error.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 20160810185502.32015-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 28ed5ef163.
I still think it's the right thing to do, but
tests have been failing sporadically.
Revert for now, and hope to fix it before the release.
Cc: Prerna Saxena <prerna.saxena@nutanix.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <mlureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1471268075-3425-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
