blk_aio_readv() and blk_aio_writev() are annoying in that they
can't access sub-sector granularity, and cannot pass flags.
Also, they require the caller to pass redundant information
about the size of the I/O (qiov->size in bytes must match
nb_sectors in sectors).
Add new blk_aio_preadv() and blk_aio_pwritev() functions to fix
the flaws. The next few patches will upgrade callers, then
finally delete the old interfaces.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sector-based blk_write() should die; convert the one-off
variant blk_write_zeroes() to use an offset/count interface
instead. Likewise for blk_co_write_zeroes() and
blk_aio_write_zeroes().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sector-based blk_read() should die; convert the one-off
variant blk_read_unthrottled().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have several block drivers that understand BDRV_REQ_FUA,
and emulate it in the block layer for the rest by a full flush.
But without a way to actually request BDRV_REQ_FUA during a
pass-through blk_pwrite(), FUA-aware block drivers like NBD are
forced to repeat the emulation logic of a full flush regardless
of whether the backend they are writing to could do it more
efficiently.
This patch just wires up a flags argument; followup patches
will actually make use of it in the NBD driver and in qemu-io.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vmdk images have metadata to indicate the vmware virtual
hardware version image was created/tested to run with.
Allow users to specify that version via new 'hwversion'
option.
[ kwolf: Adjust qemu-iotests common.filter ]
Signed-off-by: Janne Karhunen <Janne.Karhunen@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Files with conditional debug statements should ensure that the printf is
always compiled. This prevents bitrot of the format string of the debug
statement. And switch debug output to stderr.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are no block drivers left that implement the old .bdrv_read/write
interface, so it can be removed now. This gets us rid of the
corresponding emulation functions, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This doesn't really convert any of the actual vvfat logic to use
vectored I/O (and it's doubtful whether that would make sense), but
instead just adapts the wrappers to the modern interface.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This is a byte granularity version of vmdk_find_index_in_cluster().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This implements .bdrv_co_preadv() for the cloop block driver. While
updating the error paths, change -1 to a valid -errno code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This implements .bdrv_co_preadv() for the cloop block driver. While
updating the error paths, change -1 to a valid -errno code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Many parts of the block layer are already byte granularity. The block
driver interface, however, was still missing an interface that allows
making use of this. This patch introduces a new BlockDriver interface,
which is based on coroutines, vectored, has flags and uses a byte
granularity. This is now the preferred interface for new drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
It used to be an internal helper function just for implementing
bdrv_co_do_readv/writev(), but now that it's a public interface, it
deserves a name without "do" in it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Instead of registering emulation functions as .bdrv_co_writev, just
directly check whether the function is there or not, and use the AIO
interface if it isn't. This makes the read/write functions more
consistent with how things are done in other places (flush, discard,
etc.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This is a function that simply calls into the block driver for doing a
write, providing the byte granularity interface we want to eventually
have everywhere, and using whatever interface that driver supports.
This one is a bit more interesting than the version for reads: It adds
support for .bdrv_co_writev_flags() everywhere, so that drivers
implementing this function can drop .bdrv_co_writev() now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This is a function that simply calls into the block driver for doing a
read, providing the byte granularity interface we want to eventually
have everywhere, and using whatever interface that driver supports.
For now, this is just a wrapper for calling bs->drv->bdrv_co_readv().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Replace void* with an opaque LinuxAioState type.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extract the handling of io_plug "depth" from linux-aio.c and let the
main bdrv_drain loop do nothing but wait on I/O.
Like the two newly introduced functions, bdrv_io_plug and bdrv_io_unplug
now operate on all children. The visit order is now symmetrical between
plug and unplug, making it possible for formats to implement plug/unplug.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extract the handling of throttling from bdrv_flush_io_queue. These
new functions will soon become BdrvChildRole callbacks, as they can
be generalized to "beginning of drain" and "end of drain".
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Do not call bdrv_drain_recurse twice in bdrv_co_drain. A small
tweak to the logic in Fam's patch, which is harmless since no
one implements bdrv_drain anyway. But better get it right.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to remove throttled_reqs from block/io.c. This is the easy
part---hide the handling of throttled_reqs during disable/enable of
throttling within throttle-groups.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The return value is unused and I am not sure why it would be useful.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We had to disable I/O throttling with synchronous requests because we
didn't use to run timers in nested event loops when the code was
introduced. This isn't true any more, and throttling works just fine
even when using the synchronous API.
The removed code is in fact dead code since commit a8823a3b ('block: Use
blk_co_pwritev() for blk_write()') because I/O throttling can only be
set on the top layer, but BlockBackend always uses the coroutine
interface now instead of using the sync API emulation in block.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1458660792-3035-2-git-send-email-kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Call vbe_update_vgaregs() when the guest touches GFX, SEQ or CRT
registers, to make sure the vga registers will always have the
values needed by vbe mode. This makes sure the sanity checks
applied by vbe_fixup_regs() are effective.
Without this guests can muck with shift_control, can turn on planar
vga modes or text mode emulation while VBE is active, making qemu
take code paths meant for CGA compatibility, but with the very
large display widths and heigts settable using VBE registers.
Which is good for one or another buffer overflow. Not that
critical as they typically read overflows happening somewhere
in the display code. So guests can DoS by crashing qemu with a
segfault, but it is probably not possible to break out of the VM.
Fixes: CVE-2016-3712
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Reported-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Call the new vbe_update_vgaregs() function on vbe configuration
changes, to make sure vga registers are up-to-date.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When enabling vbe mode qemu will setup a bunch of vga registers to make
sure the vga emulation operates in correct mode for a linear
framebuffer. Move that code to a separate function so we can call it
from other places too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vga allows banked access to video memory using the window at 0xa00000
and it supports a different access modes with different address
calculations.
The VBE bochs extentions support banked access too, using the
VBE_DISPI_INDEX_BANK register. The code tries to take the different
address calculations into account and applies different limits to
VBE_DISPI_INDEX_BANK depending on the current access mode.
Which is probably effective in stopping misprogramming by accident.
But from a security point of view completely useless as an attacker
can easily change access modes after setting the bank register.
Drop the bogus check, add range checks to vga_mem_{readb,writeb}
instead.
Fixes: CVE-2016-3710
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes build failure with --enable-xfsctl and
new linux headers (>=4.5) and older xfsprogs(<4.5):
In file included from /usr/include/xfs/xfs.h:38:0,
from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:97:
/usr/include/xfs/xfs_fs.h:42:8: error: redefinition of ‘struct fsxattr’
struct fsxattr {
^
In file included from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:60:0:
/usr/include/linux/fs.h:155:8: note: originally defined here
struct fsxattr {
This is really a bug in the system headers, but we can work around it
by defining HAVE_FSXATTR in the QEMU headers if linux/fs.h provides
the struct, so that xfs_fs.h doesn't try to define it as well.
CC: qemu-trivial@nongnu.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
[PMM: adjusted commit message, comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minor, obvious fix only affecting BE hosts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXJfnwAAoJECgfDbjSjVRpUqgH/jzhrMSe4r6JizzltOPoQ1ET
5kLv8tsnmJS6VbtEboz2e/4UJZgOKAAkqZ1LV6C9mzxiSmffJWe5gXwCmMrrxdcD
PFyAJwvnEY6chLF7B4/GxzdP8w6qxBhdSh6QGbGrSPodl5VkuceC4ks3E7Te2p+r
6SBSBFeVPusaGz/n0F7AktrPgjS9Yyr2fFVpydC52mamwQXIYrSVHmPR6Ch6GTNt
Z+NbaLq1cId+F8w3CDcDRox8we6UcTMnngg49UZ8XJbv9T19ea3+L1V3fyb7tJ4T
15M4lOxwNsgKvoa66VUNLAitbiar1bioKNP48i/kdG2GP8P30KKXyMazWAJYJ1o=
=Jsvf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi: last minute fix for 2.6
Minor, obvious fix only affecting BE hosts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 May 2016 13:43:28 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix bios linker loadder COMMAND_ALLOCATE on bigendian host
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'make check' fails with:
ERROR:tests/bios-tables-test.c:493:load_expected_aml:
assertion failed: (g_file_test(aml_file, G_FILE_TEST_EXISTS))
since commit:
caf50c7166
tests: pc: acpi: drop not needed 'expected SSDT' blobs
Assert happens because qemu-system-x86_64 generates
SSDT table and test looks for a corresponding expected
table to compare with.
However there is no expected SSDT blob anymore, since
QEMU souldn't generate one. As it happens BIOS is not
able to read ACPI tables from QEMU and fallbacks to
embeded legacy ACPI codepath, which generates SSDT.
That happens due to wrongly sized endiannes conversion
which makes
uint8_t BiosLinkerLoaderEntry.alloc.zone
end up with 0 due to truncation of 32 bit integer
which on host is 1 or 2.
Fix it by dropping invalid cpu_to_le32() as uint8_t
doesn't require any conversion.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1330174
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Commit d5941dd documented that it leaves the default volume name as it
was ("QEMU VVFAT"), but it doesn't actually implement this. You get an
empty name (eleven space characters) instead.
This fixes the implementation to apply the advertised default.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit d5941dd made the volume name configurable, but it didn't consider
that the rw code compares the volume name string to assert that the
first directory entry is the volume name. This made vvfat crash in rw
mode.
This fixes the assertion to compare with the configured volume name
instead of a literal string.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
