This parameter has no effect, fix it.
The function init_dev_caps sets the front-end's max-sge to MAX_SGE. Then
it checks backend's max-sge and adjust it accordingly (we can't send
more than what the device supports).
On send and recv we need to make sure the num_sge in the WQE does not
exceeds the backend device capability.
This check is done in pvrdma level so check on rdma level is deleted.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190109194123.3468-1-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Before running the rdmacm-mux need to make sure that both the ib_cm
and rdma_cm kernel modules are unloaded.
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Message-Id: <20190109132829.19164-1-kamalheib1@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
The interface is described in the "TCG Platform Reset Attack
Mitigation Specification", chapter 6 "ACPI _DSM Function". According
to Laszlo, it's not so easy to implement in OVMF, he suggested to do
it in qemu instead.
See specification documentation for more details, and next commit for
memory clear on reset handling.
The underlying TCG specification is accessible from the following
page.
https://trustedcomputinggroup.org/resource/pc-client-work-group-platform-reset-attack-mitigation-specification-version-1-0/
This patch implements version 1.0.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The TPM Physical Presence interface consists of an ACPI part, a shared
memory part, and code in the firmware. Users can send messages to the
firmware by writing a code into the shared memory through invoking the
ACPI code. When a reboot happens, the firmware looks for the code and
acts on it by sending sequences of commands to the TPM.
This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't
assume that SMIs are necessary to use. It uses a similar datastructure for
the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use
of it. I extended the shared memory data structure with an array of 256
bytes, one for each code that could be implemented. The array contains
flags describing the individual codes. This decouples the ACPI implementation
from the firmware implementation.
The underlying TCG specification is accessible from the following page.
https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/
This patch implements version 1.30.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André - ACPI code improvements and windows fixes ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid having to hard code the base address of the PPI virtual
memory device we introduce a fw_cfg file etc/tpm/config that holds the
base address of the PPI device, the version of the PPI interface and
the version of the attached TPM.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André: renamed to etc/tpm/config, made it static, document it ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's been marked as deprecated in QEMU v2.6.0 already, so really nobody
should use the legacy "ivshmem" device anymore (but use ivshmem-plain or
ivshmem-doorbell instead). Time to remove the deprecated device now.
Belatedly also update a mention of the deprecated "ivshmem" in the file
docs/specs/ivshmem-spec.txt to "ivshmem-doorbell". Missed in commit
5400c02b90 ("ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmem").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It can be useful to figure out which NBD protocol features are
exposed by a server, as well as what features a client will
take advantage of if available, for a given qemu release. It's
not always precise to base features on version numbers (thanks
to downstream backports), but any documentation is better than
making users search through git logs themselves.
This patch originally stemmed from a request to document that
pristine 3.0 has a known bug where NBD_OPT_LIST_META_CONTEXT
with 0 queries forgot to advertise an available
"qemu:dirty-bitmap" context, but documenting bugs like this (or
the fact that 3.0 also botched NBD_CMD_CACHE) gets to be too
much details, especially since buggy releases will be less
likely connection targets over time. Instead, I chose to just
remind users to check stable release branches.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181215135324.152629-3-eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Interface with the device is changed with the addition of support for
MAD packets.
Adjust documentation accordingly.
While there fix a minor mistake which may lead to think that there is a
relation between using RXE on host and the compatibility with bare-metal
peers.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
The API of cpu_physical_memory_write_rom() is odd, because it
takes an AddressSpace, unlike all the other cpu_physical_memory_*
access functions. Rename it to address_space_write_rom(), and
bring its API into line with address_space_write().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20181122133507.30950-3-peter.maydell@linaro.org
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Note that union discriminators may not have 'if' conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-14-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-15-marcandre.lureau@redhat.com>
[Patches squashed, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaMember gains .ifcond for enum members: inherited classes,
such as QAPISchemaObjectTypeMember, will thus have an ifcond member
after this (those different types will also use the .ifcond to store
the condition and generate conditional code in the following patches).
The generated code remains unconditional for now. Later patches
generate the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
RFC8259 obsoletes RFC7159. Fix a couple of URLs to point to the
newer version.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181203175702.128701-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a QMP client sends in-band commands more quickly that we can
process them, we can either queue them without limit (QUEUE), drop
commands when the queue is full (DROP), or suspend receiving commands
when the queue is full (SUSPEND). None of them is ideal:
* QUEUE lets a misbehaving client make QEMU eat memory without bounds.
Not such a hot idea.
* With DROP, the client has to cope with dropped in-band commands. To
inform the client, we send a COMMAND_DROPPED event then. The event is
flawed by design in two ways: it's ambiguous (see commit d621cfe0a1),
and it brings back the "eat memory without bounds" problem.
* With SUSPEND, the client has to manage the flow of in-band commands to
keep the monitor available for out-of-band commands.
We currently DROP. Switch to SUSPEND.
Managing the flow of in-band commands to keep the monitor available for
out-of-band commands isn't really hard: just count the number of
"outstanding" in-band commands (commands sent minus replies received),
and if it exceeds the limit, hold back additional ones until it drops
below the limit again.
Note that we need to be careful pairing the suspend with a resume, or
else the monitor will hang, possibly forever. And here since we need to
make sure both:
(1) popping request from the req queue, and
(2) reading length of the req queue
will be in the same critical section, we let the pop function take the
corresponding queue lock when there is a request, then we release the
lock from the caller.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Although off_t permits up to 63 bits (8EB) of file offsets, in
practice, we're going to hit other limits first. Document some
of those limits in the qcow2 spec (some are inherent, others are
implementation choices of qemu), and how choice of cluster size
can influence some of the limits.
While we cannot map any uncompressed virtual cluster to any
address higher than 64 PB (56 bits) (due to the current L1/L2
field encoding stopping at bit 55), qemu's cap of 8M for the
refcount table can still access larger host addresses for some
combinations of large clusters and small refcount_order. For
comparison, ext4 with 4k blocks caps files at 16PB.
Another interesting limit: for compressed clusters, the L2 layout
requires an ever-smaller maximum host offset as cluster size gets
larger, down to a 512 TB maximum with 2M clusters. In particular,
note that with a cluster size of 8k or smaller, the L2 entry for
a compressed cluster could technically point beyond the 64PB mark,
but when you consider that with 8k clusters and refcount_order = 0,
you cannot access beyond 512T without exceeding qemu's limit of an
8M cap on the refcount table, it is unlikely that any image in the
wild has attempted to do so. To be safe, let's document that bits
beyond 55 in a compressed cluster must be 0.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new flag to mark memory region that are used as non-volatile, by
NVDIMM for example. That bit is propagated down to the flat view, and
reflected in HMP info mtree with a "nv-" prefix on the memory type.
This way, guest_phys_blocks_region_add() can skip the NV memory
regions for dumps and TCG memory clear in a following patch.
Cc: dgilbert@redhat.com
Cc: imammedo@redhat.com
Cc: pbonzini@redhat.com
Cc: guangrong.xiao@linux.intel.com
Cc: mst@redhat.com
Cc: xiaoguangrong.eric@gmail.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181003114454.5662-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add memory bar to pci-testdev. Size is configurable using the membar
property. Setting the size to zero (default) turns it off. Can be used
to check whether guests handle large pci bars correctly.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----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=iceI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20181031a' into staging
Minor migration fixes 2018-10-31
# gpg: Signature made Wed 31 Oct 2018 16:55:40 GMT
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20181031a:
migration: avoid segmentfault when take a snapshot of a VM which being migrated
qapi: Fix COLOStatus and query-colo-status since version
COLO: Fix Colo doc secondeary should be secondary
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb2M/IAAoJEHWtZYAqC0IRu5AIAKR7lDJ9nPDqoCOvc4hAY6TV
Zd986geEGiwrsFJ/CXbXXMsM7aUP+Qq717wekkZFghjtsfG83S+JWROZo2b8AUsI
Atq0T/G6BLWFvdzW6sCtfo8zCrhj3EFJpFWTYCIrNHDB6rs1R9bbuR/Bt2h7tpDh
CAmUkbumVUvanG4oklaRrwWfN7GksVhxAqX41PHaJAACww6UkNLzkWDJ5eQswvG6
nzEtWGQU41FqdcL+5E7nH6IEEGb4MnTkAftIab5Phr+lMWnd3mN0/tiY0wgVCDbP
OGBxOiPDxRbO4m7EH9iigFL+Xz3eZz3m6mnjmD+Ss29JkROF4Rn1E5FuJIDxiic=
=SyrU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-10-29-2' into staging
Merge tpm 2018/10/29 v2
# gpg: Signature made Tue 30 Oct 2018 21:40:24 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-10-29-2:
tpm: Zero-init structure to avoid uninitialized variables in valgrind log
MAINTAINERS: Change my email address to the new domain
docs: tpm: Mention implemented TPM CRB interface emulation and specs
tests/tpm: Display if swtpm is not found or --tpm2 not supported
tests/tpm: fix tpm_util_swtpm_has_tpm2()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guang Wang <wang.guang55@zte.com.cn>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The acceptance (aka functional, aka Avocado-based) tests are
Python files located in "tests/acceptance" that need to be run
with the Avocado libs and test runner.
Let's provide a convenient way for QEMU developers to run them,
by making use of the tests-venv with the required setup.
Also, while the Avocado test runner will take care of creating a
location to save test results to, it was understood that it's better
if the results are kept within the build tree.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a few sentences about the implemented emulation of the TPM CRB
interface and its specification.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I spent way too much time trying to figure out why the emulated NVDIMM
was missing under Linux. In an effort to help others who might be looking
for these kinds of things in the future, include a hint.
Signed-off-by: Kees Cook <keescook@chromium.org>
Message-id: 20181018201351.GA25286@beast
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The line immediate following a ".. code::" block is considered
to contains arguments to the "code directive". The lack of a
new line gives me during at parse time:
testing.rst:63: (ERROR/3) Error in "code" directive:
maximum 1 argument(s) allowed, 3 supplied.
.. code::
make check-unit V=1
testing.rst:120: (ERROR/3) Error in "code" directive:
maximum 1 argument(s) allowed, 3 supplied.
.. code::
make check-qtest V=1
Let's add the missing newlines, both for consistency and to
avoid the parsing errors.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20181004161852.11673-6-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This diagram make user better understand COLO.
Suggested by Markus Armbruster.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit 31d2dda ("build-system: remove per-test GCOV reporting", 2018-06-20)
removed users of the variables, since those uses can be replaced by a simple
overall report produced by gcovr. However, the variables were never removed.
Do it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Fixed up contextual conflicts with the patch from Eric]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch provides documentation describing the AP architecture and
design concepts behind the virtualization of AP devices. It also
includes an example of how to configure AP devices for exclusive
use of KVM guests.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Tested-by: Pierre Morel <pmorel@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181010170309.12045-7-akrowiak@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When we added the _with_attrs accessors we forgot to mention
them in the documentation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-4-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all the users of old_mmio MemoryRegion accessors
have been converted, we can remove the core code support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-2-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
-----BEGIN PGP SIGNATURE-----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=ai81
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
# gpg: Signature made Mon 01 Oct 2018 18:17:35 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (23 commits)
tests/test-bdrv-drain: Fix too late qemu_event_reset()
test-replication: Lock AioContext around blk_unref()
qcow2: Fix cache-clean-interval documentation
block-backend: Set werror/rerror defaults in blk_new()
qcow2: Explicit number replaced by a constant
qcow2: Set the default cache-clean-interval to 10 minutes
qcow2: Resize the cache upon image resizing
qcow2: Increase the default upper limit on the L2 cache size
qcow2: Assign the L2 cache relatively to the image size
qcow2: Avoid duplication in setting the refcount cache size
qcow2: Make sizes more humanly readable
include: Add a lookup table of sizes
qcow2: Options' documentation fixes
block: Allow changing 'detect-zeroes' on reopen
block: Allow changing 'discard' on reopen
file-posix: Forbid trying to change unsupported options during reopen
block: Forbid trying to change unsupported options during reopen
block: Allow child references on reopen
block: Don't look for child references in append_open_options()
block: Remove child references from bs->{options,explicit_options}
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixing cache-clean-interval documentation following the recent change to
a default of 600 seconds on supported plarforms (only Linux currently).
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cache-clean-interval is set to 10 minutes, in order to lower
the overhead of the qcow2 caches (before the default was 0, i.e.
disabled).
* For non-Linux platforms the default is kept at 0, because
cache-clean-interval is not supported there yet.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The upper limit on the L2 cache size is increased from 1 MB to 32 MB
on Linux platforms, and to 8 MB on other platforms (this difference is
caused by the ability to set intervals for cache cleaning on Linux
platforms only).
This is done in order to allow default full coverage with the L2 cache
for images of up to 256 GB in size (was 8 GB). Note, that only the
needed amount to cover the full image is allocated. The value which is
changed here is just the upper limit on the L2 cache size, beyond which
it will not grow, even if the size of the image will require it to.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.
Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.
Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds edid support to the qemu stdvga. It is turned off by
default and can be enabled with the new edid property. The patch also
adds xres and yres properties to specify the video mode you want the
guest use. Works only with edid enabled and updated guest driver.
The mmio bar of the stdvga has some unused address space at the start.
It was reserved just in case it'll be needed for virtio, but it turned
out to not be needed for that. So let's use that region to place the
EDID data block there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-6-kraxel@redhat.com
It's the same as -no-user-config and marked as deprecated since three
releases already. Time to remove it now.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "-balloon" option has been replaced by "-device virtio-balloon".
It's been marked as deprecated since two releases, and nobody
complained, so let's remove it now.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We consciously chose in commit 1a9a507b to hide QAPI type names
from the introspection output on the wire, but added a command
line option -u to unmask the type name when doing a debug build.
The unmask option still remains useful to some other forms of
automated analysis, so it will not be removed; however, when it
is not in use, the generated .c file can be hard to read. At
the time when we first introduced masking, the generated file
consisted only of a monolithic C string, so there was no clean
way to inject any comments.
Later, in commit 7d0f982b, we switched the generation to output
a QLit object, in part to make it easier for future addition of
conditional compilation. In fact, commit d626b6c1 took advantage
of this by passing a tuple instead of a bare object for encoding
the output of conditionals. By extending that tuple, we can now
interject strategic comments.
For now, type name debug aid comments are only output once per
meta-type, rather than at all uses of the number used to encode
the type within the introspection data. But this is still a lot
more convenient than having to regenerate the file with the
unmask operation temporarily turned on - merely search the
generated file for '"NNN" =' to learn the corresponding source
name and associated definition of type NNN.
The generated qapi-introspect.c changes only with the addition
of comments, such as:
| @@ -14755,6 +15240,7 @@
| { "name", QLIT_QSTR("[485]"), },
| {}
| })),
| + /* "485" = QCryptoBlockInfoLUKSSlot */
| QLIT_QDICT(((QLitDictEntry[]) {
| { "members", QLIT_QLIST(((QLitObject[]) {
| QLIT_QDICT(((QLitDictEntry[]) {
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180827213943.33524-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180828120736.32323-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
