Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the page count for these rings to
an arbitrary value, leading to infinite loop or OOB access.
Add check to avoid it.
Reported-by: Tom Victor <vv474172261@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1472626169-12989-1-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Openstack Cinder assigns volume a 36 characters uuid as serial.
QEMU will shrinks the uuid to 20 characters, which does not match
the original uuid.
Note that there is no limit to the length of the serial number in
the SCSI spec. 20 was copy-pasted from virtio-blk which in turn was
copy-pasted from ATA; 36 is even more arbitrary. However, bumping it
up too much might cause issues (e.g. 252 seems to make sense because
then the maximum amount of returned data is 256; but who knows there's
no off-by-one somewhere for such a nicely rounded number).
Signed-off-by: Rony Weng <ronyweng@synology.com>
Message-Id: <1472457138-23386-1-git-send-email-ronyweng@synology.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's just remove some files from the pool of unmaintained files.
I am obviously not going to send pull requests only for stubs/, but
I will ack them if maintainers want that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Updates the help messages to remove misleading information about SDL
being the normal display used.
Signed-off-by: Colin Lord <cdlord2@illinois.edu>
Message-Id: <1471030248-21637-1-git-send-email-cdlord2@illinois.edu>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The returned value of cpu_get_clock() is plused with the offset,
so it is the time elapsed in virtual machine when vm is active.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469790338-28990-4-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function actually returns monotonic time value in nanosecond,
the "ticks" is not suitable.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469790338-28990-3-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comments is outdated. The patch has following changes:
1. tense correction.
2. all clock time value is returned in nanoseconds, so, they are same in
precision.
3. virtual clock doesn't use cpu cycles.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469790338-28990-2-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For module build, .mo objects are passed to LINK and consumed in
process-archive-undefs. The reason behind that is documented in the
comment above process-archive-undefs.
Similarly, extract-libs should be called with .mo filtered out too.
Otherwise, the .mo-libs are added to the link command incorrectly,
spoiling the purpose of modularization.
Currently we don't have any .mo-libs usage, but it will be used soon
when we modularize more multi-source objects, like sdl and gtk.
Reported-by: Colin Lord <clord@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1469600777-30413-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In fact, this function does not exactly perform a lookup by physical
address as it is descibed for comment on get_page_addr_code(). Thus
it may be a bit confusing to have "physical" in it's name. So rename it
to tb_htable_lookup() to better reflect its actual functionality.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <20160715175852.30749-13-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions are not too big and can be merged together. This makes
locking scheme more clear and easier to follow.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160715175852.30749-12-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lock contention in the hot path of moving between existing patched
TranslationBlocks is the main drag in multithreaded performance. This
patch pushes the tb_lock() usage down to the two places that really need
it:
- code generation (tb_gen_code)
- jump patching (tb_add_jump)
The rest of the code doesn't really need to hold a lock as it is either
using per-CPU structures, atomically updated or designed to be used in
concurrent read situations (qht_lookup).
To keep things simple I removed the #ifdef CONFIG_USER_ONLY stuff as the
locks become NOPs anyway until the MTTCG work is completed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <20160715175852.30749-10-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures that if we find the TB on the slow path that tb->page_addr
is correctly set before being tested.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <20160715175852.30749-9-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When invalidating a translation block, set an invalid flag into the
TranslationBlock structure first. It is also necessary to check whether
the target TB is still valid after acquiring 'tb_lock' but before calling
tb_add_jump() since TB lookup is to be performed out of 'tb_lock' in
future. Note that we don't have to check 'last_tb'; an already invalidated
TB will not be executed anyway and it is thus safe to patch it.
Suggested-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure atomicity and ordering of CPU's 'tb_flushed' access for future
translation block lookup out of 'tb_lock'.
This field can only be touched from another thread by tb_flush() in user
mode emulation. So the only access to be sequential atomic is:
* a single write in tb_flush();
* reads/writes out of 'tb_lock'.
In future, before enabling MTTCG in system mode, tb_flush() must be safe
and this field becomes unnecessary.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160715175852.30749-5-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure atomicity of CPU's 'tb_jmp_cache' access for future translation
block lookup out of 'tb_lock'.
Note that this patch does *not* make CPU's TLB invalidation safe if it
is done from some other thread while the CPU is in its execution loop.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160715175852.30749-4-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a small clean up. tb_find_fast() is a final consumer of this
variable so no need to pass it by reference. 'last_tb' is always updated
by subsequent cpu_loop_exec_tb() in cpu_exec().
This change also simplifies calling cpu_exec_nocache() in
cpu_handle_exception().
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <20160715175852.30749-3-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix some coding style issues found in removing NonBlockingConnectHandler.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviwed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469696074-12744-3-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Follow CODING_STYLE
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469703004-14800-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can't hotplug display adapters in qemu, tag virtio-gpu-pci
accordingly (virtio-vga already has this).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1473319037-27645-1-git-send-email-kraxel@redhat.com
When processing svga command DEFINE_CURSOR in vmsvga_fifo_run,
the computed BITMAP and PIXMAP size are checked against the
'cursor.mask[]' and 'cursor.image[]' array sizes in bytes.
Correct these checks to avoid OOB memory access.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1473338754-15430-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
since f1d3e58, the code had changed the default value to 'off', so this patch
make document and code are consistent.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-id: 1470024419-10886-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity identifies that at the top of the while(1) loop
in curses_refresh() the variable nextchr is always ERR,
and so the else case of the first if() is dead code.
Remove this dead code, and narrow the scope of the
nextchr variable to the place where it's used.
(This confused logic has been present since the curses
code was added to QEMU in 2008.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1470925407-23850-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity spots that there is no bounds check before we
access the curses2qemu[] array. Add one, bringing this
code path into line with the one that looks up entries
in curses2keysym[].
In theory getch() shouldn't return out of range keycodes,
but it's better not to assume this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1470925407-23850-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Added documentation describing relation between GlusterServer and
SocketAddress qapi schemas.
Thanks to Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Message-id: 1471715924-3642-1-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
currently all the libgfapi logs defaults to '/dev/stderr' as it was hardcoded
in a call to glfs logging api. When the debug level is chosen to DEBUG/TRACE,
gfapi logs will be huge and fill/overflow the console view.
This patch provides a commandline option to mention log file path which helps
in logging to the specified file and also help in persisting the gfapi logs.
Usage:
-----
*URI Style:
---------
-drive file=gluster://hostname/volname/image.qcow2,file.debug=9,\
file.logfile=/var/log/qemu/qemu-gfapi.log
*JSON Style:
----------
'json:{
"driver":"qcow2",
"file":{
"driver":"gluster",
"volume":"volname",
"path":"image.qcow2",
"debug":"9",
"logfile":"/var/log/qemu/qemu-gfapi.log",
"server":[
{
"type":"tcp",
"host":"1.2.3.4",
"port":24007
},
{
"type":"unix",
"socket":"/var/run/glusterd.socket"
}
]
}
}'
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Several error messages print out the raw enum value, which
is less than helpful to users, as these values are not
documented, nor stable across QEMU releases. Switch to use
the enum string instead.
The nettle impl also had two typos where it mistakenly
said "algorithm" instead of "mode", and actually reported
the algorithm value too.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
gnutls commit 846753877d renamed LIBGNUTLS_VERSION_NUMBER to GNUTLS_VERSION_NUMBER.
If using gnutls before that verion, we'll get the below warning:
crypto/tlscredsx509.c:618:5: warning: "GNUTLS_VERSION_NUMBER" is not defined
Because gnutls 3.x still defines LIBGNUTLS_VERSION_NUMBER for back compat, Let's
use LIBGNUTLS_VERSION_NUMBER instead of GNUTLS_VERSION_NUMBER to fix building
complaint.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XTS cipher mode needs to be used with a cipher which has
a block size of 16 bytes. If a mis-matching block size is used,
the code will either corrupt memory beyond the IV array, or
not fully encrypt/decrypt the IV.
This fixes a memory corruption crash when attempting to use
cast5-128 with xts, since the former has an 8 byte block size.
A test case is added to ensure the cipher creation fails with
such an invalid combination.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement the new virtio sockets device for host<->guest communication
using the Sockets API. Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.
The vsock device must be given a CID (host-wide unique address):
# qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...
For more information see:
http://qemu-project.org/Features/VirtioVsock
[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use kvm acceleration if available.
Disable kernel-irqchip and use qemu64 cpu
for both kvm and tcg cases.
Using kvm acceleration saves about a second
and disabling kernel-irqchip has no visible
performance impact.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
!legacy && !modern is shorter than !(legacy || modern).
I also perfer this (less ()s) as a matter of taste.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to set vring call fd unconditionally even if guest driver does
not use MSIX for this vritqueue at all. This will cause lots of
unnecessary userspace access and other checks for drivers does not use
interrupt at all (e.g virtio-net pmd). So check and clean vring call
fd if guest does not use any vector for this virtqueue at
all.
Perf diffs (on rx) shows lots of cpus wasted on vhost_signal() were saved:
#
28.12% -27.82% [vhost] [k] vhost_signal
14.44% -1.69% [kernel.vmlinux] [k] copy_user_generic_string
7.05% +1.53% [kernel.vmlinux] [k] __free_page_frag
6.51% +5.53% [vhost] [k] vhost_get_vq_desc
...
Pktgen tests shows 15.8% improvement on rx pps and 6.5% on tx pps.
Before: RX 2.08Mpps TX 1.35Mpps
After: RX 2.41Mpps TX 1.44Mpps
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without presuming if we got there because of a user mistake or some
more subtle bug in the tooling, it really does not make sense to
implement a non-functional device.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The statistics virtqueue is not migrated properly because virtio-balloon
does not include s->stats_vq_elem in the migration stream.
After migration the statistics virtqueue hangs because the host never
completes the last element (s->stats_vq_elem is NULL on the destination
QEMU). Therefore the guest never submits new elements and the virtqueue
is hung.
Instead of changing the migration stream format in an incompatible way,
detect the migration case and rewind the virtqueue so the last element
can be completed.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtqueue_discard() requires a VirtQueueElement but virtio-balloon does
not migrate its in-use element. Introduce a new function that is
similar to virtqueue_discard() but doesn't require a VirtQueueElement.
This will allow virtio-balloon to access element again after migration
with the usual proviso that the guest may have modified the vring since
last time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
