One of the annoyances of the current migration format is the fact that
it's not self-describing. In fact, it's not properly describing at all.
Some code randomly scattered throughout QEMU elaborates roughly how to
read and write a stream of bytes.
We discussed an idea during KVM Forum 2013 to add a JSON description of
the migration protocol itself to the migration stream. This patch
adds a section after the VM_END migration end marker that contains
description data on what the device sections of the stream are composed of.
This approach is backwards compatible with any QEMU version reading the
stream, because QEMU just stops reading after the VM_END marker and ignores
any data following it.
With an additional external program this allows us to decipher the
contents of any migration stream and hopefully make migration bugs easier
to track down.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For ftell we flush the output buffer to ensure that we don't have anything
lingering in our internal buffers. This is a very safe thing to do.
However, with the dynamic size measurement that the dynamic vmstate
description will bring this would turn out quite slow.
Instead, we can fast path this specific measurement and just take the
internal buffers into account when telling the kernel our position.
I'm sure I overlooked some corner cases where this doesn't work, so
instead of tuning the safe, existing version, this patch adds a fast
variant of ftell that gets used by the dynamic vmstate description code
which isn't critical when it fails.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To support programmatic JSON assembly while keeping the code that generates it
readable, this patch introduces a simple JSON writer. It emits JSON serially
into a buffer in memory.
The nice thing about this writer is its simplicity and low memory overhead.
Unlike the QMP JSON writer, this one does not need to spawn QObjects for every
element it wants to represent.
This is a prerequisite for the migration stream format description generator.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Mostly on the load side, so that when we get a complaint about
a migration failure we can figure out what it didn't like.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Convert a bunch of fprintfs to error_reports
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Commit 22382bb96c renamed the
'hw_cursor_x' and 'hw_cursor_y' fields in cirrus_vga. Update the static
checker's whitelist to allow matching against the old and new names.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* refactor/clean up armv7m_init()
* some initial cleanup in the direction of supporting 64-bit EL3
* fix broken synchronization of registers between QEMU and KVM
for 32-bit ARM hosts (which among other things broke memory
access via gdbstub)
* fix flush-to-zero handling in FMULX, FRECPS, FRSQRTS and FRECPE
* don't crash QEMU for UNPREDICTABLE BFI insns in A32 encoding
* explain why virt board's device-to-transport mapping code is
the way it is
* implement mmu_idx values which match the architectural
distinctions, and introduce the concept of a translation
regime to get_phys_addr() rather than incorrectly looking
at the current CPU state
* update to upstream VIXL 1.7 (gives us correct code addresses
when dissassembling pc-relative references)
* sync system register state between KVM and QEMU for 64-bit ARM
* support virtio on big-endian guests by implementing the
"which endian is the guest now?" CPU method
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gmUH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150205' into staging
target-arm queue:
* refactor/clean up armv7m_init()
* some initial cleanup in the direction of supporting 64-bit EL3
* fix broken synchronization of registers between QEMU and KVM
for 32-bit ARM hosts (which among other things broke memory
access via gdbstub)
* fix flush-to-zero handling in FMULX, FRECPS, FRSQRTS and FRECPE
* don't crash QEMU for UNPREDICTABLE BFI insns in A32 encoding
* explain why virt board's device-to-transport mapping code is
the way it is
* implement mmu_idx values which match the architectural
distinctions, and introduce the concept of a translation
regime to get_phys_addr() rather than incorrectly looking
at the current CPU state
* update to upstream VIXL 1.7 (gives us correct code addresses
when dissassembling pc-relative references)
* sync system register state between KVM and QEMU for 64-bit ARM
* support virtio on big-endian guests by implementing the
"which endian is the guest now?" CPU method
# gpg: Signature made Thu 05 Feb 2015 14:02:16 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150205: (28 commits)
target-arm: fix for exponent comparison in recpe_f64
target-arm: Guest cpu endianness determination for virtio KVM ARM/ARM64
target-arm: KVM64: Get and Sync up guest register state like kvm32.
disas/arm-a64.cc: Tell libvixl correct code addresses
disas/libvixl: Update to upstream VIXL 1.7
target-arm: Fix brace style in reindented code
target-arm: Reindent ancient page-table-walk code
target-arm: Use mmu_idx in get_phys_addr()
target-arm: Pass mmu_idx to get_phys_addr()
target-arm: Split AArch64 cases out of ats_write()
target-arm: Don't define any MMU_MODE*_SUFFIXes
target-arm: Use correct mmu_idx for unprivileged loads and stores
target-arm: Define correct mmu_idx values and pass them in TB flags
target-arm/translate-a64: Fix wrong mmu_idx usage for LDT/STT
target-arm: Make arm_current_el() return sensible values for M profile
cpu_ldst.h: Allow NB_MMU_MODES to be 7
hw/arm/virt: explain device-to-transport mapping in create_virtio_devices()
target-arm: check that LSB <= MSB in BFI instruction
target-arm: Squash input denormals in FRECPS and FRSQRTS
Fix FMULX not squashing denormalized inputs when FZ is set.
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
f64 exponent in HELPER(recpe_f64) should be compared to 2045 rather than 1023
(FPRecipEstimate in ARMV8 spec). This fixes incorrect underflow handling when
flushing denormals to zero in the FRECPE instructions operating on 64-bit
values.
Signed-off-by: Ildar Isaev <ild@inbox.ru>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements a fucntion pointer "virtio_is_big_endian"
from "CPUClass" structure for arm/arm64.
Function arm_cpu_is_big_endian() is added to determine and
return the guest cpu endianness to virtio.
This is required for running cross endian guests with virtio on ARM/ARM64.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Message-id: 1423130382-18640-3-git-send-email-pranavkumar@linaro.org
[PMM: check CPSR_E in env->cpsr_uncached, not env->pstate.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds:
1. Call write_kvmstate_to_list() and write_list_to_cpustate()
in kvm_arch_get_registers() to sync guest register state.
2. Call write_list_to_kvmstate() in kvm_arch_put_registers()
to sync guest register state.
These changes are already there for kvm32 in target-arm/kvm32.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Message-id: 1423130382-18640-2-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
disassembling relative branches in code which doesn't reside at
what the guest CPU would think its execution address is. Use
the new MapCodeAddress() API to tell libvixl where the code is
from the guest CPU's point of view so it can get the target
addresses right.
Previous disassembly:
0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x7f6cb7020434)
0x0000000040000004: aa1f03e1 mov x1, xzr
0x0000000040000008: aa1f03e2 mov x2, xzr
0x000000004000000c: aa1f03e3 mov x3, xzr
0x0000000040000010: 58000084 ldr x4, pc+16 (addr 0x7f6cb702042c)
0x0000000040000014: d61f0080 br x4
Fixed disassembly:
0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x40000018)
0x0000000040000004: aa1f03e1 mov x1, xzr
0x0000000040000008: aa1f03e2 mov x2, xzr
0x000000004000000c: aa1f03e3 mov x3, xzr
0x0000000040000010: 58000084 ldr x4, pc+16 (addr 0x40000020)
0x0000000040000014: d61f0080 br x4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-3-git-send-email-peter.maydell@linaro.org
Update our copy of libvixl to upstream's 1.7 release.
This includes upstream's fix for the issue we had a local
patch for in commit 94cc44a9e.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-2-git-send-email-peter.maydell@linaro.org
This patch fixes the brace style in the code reindented in the
previous commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
A few of the oldest parts of the page-table-walk code have broken indent
(either hardcoded tabs or two-spaces). Reindent these sections.
For ease of review, this patch does not touch the brace style and
so is a whitespace-only change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Now we have the mmu_idx in get_phys_addr(), use it correctly to
determine the behaviour of virtual to physical address translations,
rather than using just an is_user flag and the current CPU state.
Some TODO comments have been added to indicate where changes will
need to be made to add EL2 and 64-bit EL3 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Make all the callers of get_phys_addr() pass it the correct
mmu_idx rather than just a simple "is_user" flag. This includes
properly decoding the AT/ATS system instructions; we include the
logic for handling all the opc1/opc2 cases because we'll need
them later for supporting EL2/EL3, even if we don't have the
regdef stanzas yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Instead of simply reusing ats_write() as the handler for both AArch32
and AArch64 address translation operations, use a different function
for each with the common code in a third function. This is necessary
because the semantics for selecting the right translation regime are
different; we are only getting away with sharing currently because
we don't support EL2 and only support EL3 in AArch32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
target-arm doesn't use any of the MMU-mode specific cpu ldst
accessor functions. Suppress their generation by not defining
any of the MMU_MODE*_SUFFIX macros. ("user" and "kernel" are
too simplistic as descriptions of indexes 0 and 1 anyway.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The MMU index to use for unprivileged loads and stores is more
complicated than we currently implement:
* for A64, it should be "if at EL1, access as if EL0; otherwise
access at current EL"
* for A32/T32, it should be "if EL2, UNPREDICTABLE; otherwise
access as if at EL0".
In both cases, if we want to make the access for Secure EL0
this is not the same mmu_idx as for Non-Secure EL0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
We currently claim that for ARM the mmu_idx should simply be the current
exception level. However this isn't actually correct -- secure EL0 and EL1
should have separate indexes from non-secure EL0 and EL1 since their
VA->PA mappings may differ. We also will want an index for stage 2
translations when we properly support EL2.
Define and document all seven mmu index values that we require, and
pass the mmu index in the TB flags rather than exception level or
priv/user bit.
This change doesn't update the get_phys_addr() code, so our page
table walking still assumes a simplistic "user or priv?" model for
the moment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
---
This leaves some odd gaps in the TB flags usage. I will circle
back and clean this up later (including moving the other common
flags like the singlestep ones to the top of the flags word),
but I didn't want to bloat this patchseries further.
The LDT/STT (load/store unprivileged) instruction decode was using
the wrong MMU index value. This meant that instead of these insns
being "always access as if user-mode regardless of current privilege"
they were "always access as if kernel-mode regardless of current
privilege". This went unnoticed because AArch64 Linux doesn't use
these instructions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
I'm not counting this as a security issue because I'm assuming
nobody treats TCG guests as a security boundary (certainly I
would not recommend doing so...)
Although M profile doesn't have the same concept of exception level
as A profile, it does have a notion of privileged versus not, which
we currently track in the privmode TB flag. Support returning this
information if arm_current_el() is called on an M profile core, so
that we can identify the correct MMU index to use (and put the MMU
index in the TB flags) without having to special-case M profile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Support guest CPUs which need 7 MMU index values.
Add a comment about what would be required to raise the limit
further (trivial for 8, TCG backend rework for 9 or more).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The documentation states that if LSB > MSB in BFI instruction behaviour
is unpredictable. Currently QEMU crashes because of assertion failure in
this case:
tcg/tcg-op.h:2061: tcg_gen_deposit_i32: Assertion `len <= 32' failed.
While assertion failure may meet the "unpredictable" definition this
behaviour is undesirable because it allows an unprivileged guest program
to crash the emulator with the OS and other programs.
This patch addresses the issue by throwing illegal instruction exception
if LSB > MSB. Only ARM decoder is affected because Thumb decoder already
has this check in place.
To reproduce issue run the following program
int main(void) {
asm volatile (".long 0x07c00c12" :: );
return 0;
}
compiled with
gcc -marm -static badop_arm.c -o badop_arm
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The helper functions for FRECPS and FRSQRTS have special case
handling that includes checks for zero inputs, so squash input
denormals if necessary before those checks. This fixes incorrect
output when the FPCR DZ bit is set to enable squashing of input
denormals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
While FMULX returns a 2.0f float when two operators are infinity and
zero, those operators should be unpacked from raw inputs first. Inconsistent
cases would occur when operators are denormalized floats in flush-to-zero
mode. A wrong codepath will be entered and 2.0f will not be returned
without this patch.
Fix by checking whether inputs need to be flushed before running into
different codepaths.
Signed-off-by: Xiangyu Hu <libhu.so@gmail.com>
Message-id: 1422459650-12490-1-git-send-email-libhu.so@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add assertion checking when cpreg structures are registered that they
either forbid raw-access attempts or at least make an attempt at
handling them. Also add an assert in the raw-accessor-of-last-resort,
to avoid silently doing a read or write from offset zero, which is
actually AArch32 CPU register r0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422282372-13735-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
We currently mark ARM coprocessor/system register definitions with
the flag ARM_CP_NO_MIGRATE for two different reasons:
1) register is an alias on to state that's also visible via
some other register, and that other register is the one
responsible for migrating the state
2) register is not actually state at all (for instance the TLB
or cache maintenance operation "registers") and it makes no
sense to attempt to migrate it or otherwise access the raw state
This works fine for identifying which registers should be ignored
when performing migration, but we also use the same functions for
synchronizing system register state between QEMU and the kernel
when using KVM. In this case we don't want to try to sync state
into registers in category 2, but we do want to sync into registers
in category 1, because the kernel might have picked a different
one of the aliases as its choice for which one to expose for
migration. (In particular, on 32 bit hosts the kernel will
expose the state in the AArch32 version of the register, but
TCG's convention is to mark the AArch64 version as the version
to migrate, even if the CPU being emulated happens to be 32 bit,
so almost all system registers will hit this issue now that we've
added AArch64 system emulation.)
Fix this by splitting the NO_MIGRATE flag in two (ALIAS and NO_RAW)
corresponding to the two different reasons we might not want to
migrate a register. When setting up the TCG list of registers to
migrate we honour both flags; when populating the list from KVM,
only ignore registers which are NO_RAW.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1422282372-13735-2-git-send-email-peter.maydell@linaro.org
[PMM: changed ARM_CP_NO_MIGRATE to ARM_CP_ALIAS on new SP_EL1 and
SP_EL2 reginfo stanzas since there was a (semantic) merge conflict
with the patchset that added those]
Update to arm_cpu_reset() to reset into the highest available exception level
based on the set ARM features.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added RVBAR_EL2 and RVBAR_EL3 CP register support. All RVBAR_EL# registers
point to the same location and only the highest EL version exists at any one
time.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-3-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the RVBAR_EL1 CP register opc2 encoding from 2 to 1
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allows the board to specifiy the number of NVIC interrupt
lines when using armv7m_init.
Signed-off-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a0b0fcc778df0340899f488053acc9493679e03.1422077994.git.alistair23@gmail.com
[PMM: removed stale FIXME comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch moves the memory region init code from the
armv7m_init function to the stellaris_init function
Signed-off-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 4836be7e1d708554d6eb0bc639dc2fbf7dac0458.1422077994.git.alistair23@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit d8d9581460 added explicit object_unparent() calls for
dynamically allocated MemoryRegions. The VFIOMSIXInfo structure also
contains such a MemoryRegion, covering the mmap'd region of a PCI BAR
above the MSI-X table. This structure is freed as part of the class
exit function and therefore also needs an explicit object_unparent().
Failing to do this results in random segfaults due to fields within
the structure, often the class pointer, being reclaimed and corrupted
by the time object_finalize_child_property() is called for the object.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org # 2.2
This patch fixes the bug with borrow_in being set incorrectly, but it
also simplifies the logic to be much more plain, improving speed. It
fixes both the 32-bit SLB* and 64-bit SLBG*.
The SLBG* change has been well-tested. I haven't tested the SLB* change
explicitly, but the code was copy-pasted from the tested code.
The error of these functions' current implementations would not likely
be triggered by compiler-generated code, since the only error was in the
state of the carry/borrow flag. Compilers rarely generate an
instruction sequence such as carry-set -> carry-set-and-use ->
carry-use.
(With Paolo's fix and mine, there are still a couple of failures from
GMP's testsuite, but they are almost surely due to incorrect code
generation from gcc 4.9. But since this gcc is running under qemu, it
might be qemu bugs. I intend to investigate this.)
Signed-off-by: Torbjorn Granlund <torbjorng@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is needed to run the GMP testsuite.
Reported-by: Torbjorn Granlund <torbjorng@google.com>
Tested-by: Torbjorn Granlund <torbjorng@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The variables s390_opformats and s390_num_opformats are unused and
provoke clang warnings:
disas/s390.c:849:33: warning: variable 's390_opformats' is not needed and will not be emitted [-Wunneeded-internal-declaration]
static const struct s390_opcode s390_opformats[] =
^
disas/s390.c:875:18: warning: unused variable 's390_num_opformats' [-Wunused-const-variable]
static const int s390_num_opformats =
^
Delete them, since QEMU doesn't use them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1419373100-17690-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <rth@twiddle.net>
The function check_privileged() is only used in the softmmu configs;
wrap it in an #ifndef CONFIG_USER_ONLY to avoid clang warnings on the
linux-user builds.
[rth: Remove inline marker too; it was only there to prevent exactly
this warning in GCC.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1419373100-17690-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <rth@twiddle.net>
The implementation had been incomplete, as we did not store the
machine type. Note that the machine_type member is still unset
during initialization, so this has no effect yet.
Signed-off-by: Richard Henderson <rth@twiddle.net>
