Action that depends on fully initialized device model should register
with this notifier chain.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qxl is a paravirtual graphics card. The qxl device is the bridge
between the guest and the spice server (aka libspice-server). The
spice server will send the rendering commands to the spice client, which
will actually render them.
The spice server is also able to render locally, which is done in case
the guest wants read something from video memory. Local rendering is
also used to support display over vnc and sdl.
qxl is activated using "-vga qxl". qxl supports multihead, additional
cards can be added via '-device qxl".
[ v2: add copyright to files ]
[ v2: use qemu-common.h for standard includes ]
[ v2: create separate qxl-vga device for primary ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch drops DT_VNC. The display types are only used to select
select the local display (i.e. curses, sdl, coca, ...). Remote
displays (for now only vnc, spice will follow) can be enabled
independently.
When a 'cont' is issued on a VM that's just waiting for an incoming
migration, the VM reboots and boots into the guest, possibly corrupting
its storage since it could be shared with another VM running elsewhere.
Ensure that a VM started with '-incoming' is only run when an incoming
migration successfully completes.
A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont'
failed due to no incoming migration has been attempted yet.
Reported-by: Laine Stump <laine@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Hook up any cleanup work which needs to be done here. Advantages over
using atexit(3):
(1) You get passed in a pointer to the notifier. If you embed that
into your state struct you can use container_of() to get get your
state info.
(2) You can unregister, say when un-plugging a device.
[ v2: move code out of #ifndef _WIN32 ]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move daemonize handling from vl.c to OS specific files. Provide dummy
stubs for Win32.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce OS specific cmdline argument handling by calling
os_parse_cmd_args() at the end of switch() statement. Move option
enum to qemu-options.h and have it included from os-posix.c and
os-win32.c in addition to vl.c.
In addition move SMB argument to os-posix.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This moves the win32 and POSIX versions of find_datadir() to OS
specific files, and removes some #ifdef clutter from vl.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename os_setup_signal_handling() to os_setup_early_signal_handling()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move win32 early signal handling setup to os_setup_signal_handling()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move host_main_loop_wait() to OS specific files. Create
qemu-os-posix.h and provide empty inline for the POSIX case.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Create qemu-os-win32.h for WIN32 specific declarations. Move polling
handling declaration into this file from sysemu.h
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't want pci_del in QMP. Use device_del instead.
This reverts commit 6848d82716.
Conflicts:
hw/pci-hotplug.c
sysemu.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Short story: We don't want pci_add in QMP. Long story follows.
pci_add can do two things:
* Hot plug a PCI NIC. device_add is more general.
* Hot plug a PCI disk controller, and a drive connected to it.
The controller is either virtio-blk-pci (if=virtio) or lsi53c895a
(if=scsi). With the latter, the drive is optional. Use drive_add to
hotplug additional SCSI drives. Except drive_add is not available in
QMP.
device_add is more general for controllers and the guest part of
drives. I'm working on a more general alternative for the host part
of drives.
Why am I proposing to remove pci_add from QMP before its replacement is
ready? I want it out sooner rather than later, because it isn't fully
functional (errors and drive_add are missing), and we do not plan to
complete the job. In other words, it's not really usable over QMP now,
and it's not what we want for QMP anyway. Since we don't want it to be
used over QMP, we should take it out, not leave it around as a trap for
the uninitiated.
Dan Berrange confirmed that libvirt has no need for pci_add & friends
over QMP.
This reverts commit 7a344f7ac7.
Conflicts:
hw/pci-hotplug.c
sysemu.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The 'quit' Monitor command (implemented by do_quit()) calls
exit() directly, this is problematic under QMP because QEMU
exits before having a chance to send the ok response.
Clients don't know if QEMU exited because of a problem or
because the 'quit' command has been executed.
This commit fixes that by moving the exit() call to the main
loop, so that do_quit() requests the system to quit, instead
of calling exit() directly.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Move target specific functions and RAM handling to arch_init.c.
Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.
Now that no target dependencies remain, compile vl.c only once
for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Just tell main_loop_wait whether to be blocking or nonblocking, so that
there is no need to call qemu_cpus_have_work from the timer subsystem.
Instead, tcg_cpu_exec can say "we want the main loop not to block because
we have stuff to do".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu_error_sink can either point to a monitor or a file. In practice,
it always points to the current monitor if we have one, else to
stderr. Simply route errors to the current monitor or else to stderr,
and remove qemu_error_sink along with the functions to control it.
Actually, the old code switches the sink slightly later, in
handle_user_command() and handle_qmp_command(), than it gets switched
now, implicitly, by setting the current monitor in monitor_read() and
monitor_control_read(). Likewise, it switches back slightly earlier
(same places). Doesn't make a difference, because there are no calls
of qemu_error() in between.
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:
- cpu_synchronize_all_states in qemu_savevm_state_complete
(initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
(writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
(writeback after system reset)
These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:
- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well)
This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.
cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.
Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.
The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.
This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.
As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using
-virtioconsole ...
is maintained, but the new, preferred way is to use
-device virtio-serial -device virtconsole,chardev=...
With this commit, multiple devices as well as multiple ports with a
single device can be supported.
For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.
In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.
This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Return a QDict with information about the just added device.
This commit should not change user output.
Please, note that this patch does not do error handling
conversion. In error conditions the handler still calls
monitor_printf().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
rerror controls the action to be taken when an error occurs while accessing the
guest image file. It corresponds to werror which already controls the action
take for write errors.
This purely introduces parsing rerror command line option into the right
structures, real support for it in the device emulation is added in the
following patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Either rename variables and functions to refer to write errors (which is what
they actually do) or introduce a parameter to distinguish reads and writes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to allow proper progress reporting to the monitor that
initiated the migration, forward the monitor reference through the
migration layer down to SaveLiveStateHandler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce qemu_savevm_state_cancel and inject a stage -1 to cancel a
live migration. This gives the involved subsystems a chance to clean up
dynamically allocated resources. Namely, the block migration layer can
now free its device descriptors and pending blocks.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds QError support in the Monitor.
A QError member is added to the Monitor struct. This new member
stores error information and is also used to check if an error
has occurred when the called handler returns.
Additionally, a new macro called qemu_error_new() is introduced.
It builds on top of the QemuErrorSink API and should be used in
place of qemu_error().
When all conversion to qemu_error_new() is done, qemu_error() can
be turned private.
Basically, Monitor's error flow is something like this:
1. An error occurs in the handler, it calls qemu_error_new()
2. qemu_error_new() builds a new QError object and stores it in
the Monitor struct
3. The handler returns
4. Top level Monitor code checks the Monitor struct and calls
qerror_print() to print the error
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduces block migration called during live migration. Block
are being copied to the destination in an async way. First the code will
transfer the whole disk and then transfer all dirty blocks accumulted during
the migration.
Still need to improve transition from the iterative phase of migration to the
end phase. For now transition will take place when all blocks transfered once,
all the dirty blocks will be transfered during the end phase (guest is
suspended).
Changes from v4:
- Global variabels moved to a global state structure allocated dynamically.
- Minor coding style issues.
- Poll block.c for tracking of dirty blocks instead of manage it here.
Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Errors are still directly printed, as we are only converting
regular output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
