vpc does support images > 127 GB if done correctly. qemu does it
correctly. Remove the test pretending otherwise.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit c4bacafb71 changed (improved)
qdev_init_nofail()'s error reporting, which affects iotest 051. Fix the
reference output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check the QVIRTIO_F_ANY_LAYOUT flag before performing operations with 2
descriptor layout. This is to follow the specification strictly.
This patch depends on:
[PATCH v5 0/5] libqos: Virtio MMIO driver
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Message-id: 1424815154-27243-1-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The MSIX interrupt was always acked without checking its value, which caused a
race condition. If the ISR was raised between the read and the acking, the ISR
was never detected and it timed out.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Message-id: 1424795655-16952-1-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test what happens when we try to use extremely short PRDTs
to accomplish a small data transfer.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In addition to DMA tests, test PIO and LBA48 command pathways in AHCI.
To accomplish this, a primitive multiplexer for gtest is added.
Though guests may prefer not to issue PIO commands directly except
for single sector cases during early boot and shutdown, these pathways
are still used for the transfer of ATAPI commands as well, and should
be behaving well.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These test a few different pathways in the AHCI code.
short: Test the minimum transfer size, exactly one sector.
simple: Test a transfer using a single PRD, in this case, 4K.
double: Test transferring 8K, which we will split up as two PRDs.
long: Test transferring a lot of data using many PRDs, 256K.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ahci_command_set_flags: Set additional flags in the command header.
ahci_command_clr_flags: Clear flags from the command header.
ahci_command_set_offset: Change the IO sector from 0.
ahci_command_adjust: Adjust many values simultaneously.
To be used to adjust the command header if the default values/guesses
were incorrect or undesirable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[ kwolf: Fixed conflicting prototype for ahci_command_adjust() ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a routine that can be used to engage the AHCI
device at a not-granular level so that bringing up
the functionality of the HBA is easy in future tests
that are not concerned with testing the bring-up process.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even though it's just the reserved space, make sure they're zeroes.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424905602-24715-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds tests for werror and rerror functionality
for the PCI and ISA ide buses.
Tests for the AHCI device are to be included at a later
date after requisite patches have been merged upstream
to support needed functionality by the tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1424708286-16483-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Background:
The blkdebug scripts are currently engineered so that when a debug
event occurs, a prefilter browses a master list of parsed rules for a
certain event and adds them to an "active list" of rules to be used for
the forthcoming action, provided the events and state numbers match.
Then, once the request is received, the last active rule is used to
inject an error if certain parameters match.
This active list is cleared every time the prefilter injects a new
rule for the first time during a debug event.
The "once" rule currently causes the error injection, if it is
triggered, to only clear the active list. This is insufficient for
preventing future injections of the same rule.
Remedy:
This patch /deletes/ the rule from the list that the prefilter
browses, so it is gone for good. In V2, we remove only the rule of
interest from the active list instead of allowing the "once" rule to
clear the entire list of active rules.
Impact:
This affects iotests 026. Several ENOSPC tests that used "once" can
be seen to have output that shows multiple failure messages. After
this patch, the error messages tend to be smaller and less severe, but
the injection can still be seen to be working. I have patched the
expected output to expect the smaller error messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423257977-25630-1-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for errors specific to certain widths (i.e. snapshots with
refcount_bits=1).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a creation option to qcow2 for setting the refcount order of images
to be created, and respect that option's value.
This breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some tests do not work well with certain refcount widths (i.e. you
cannot create internal snapshots with refcount_bits=1), so make those
widths unsupported.
Furthermore, add another filter to _filter_img_create in common.filter
which filters out the refcount_bits value.
This is necessary for test 079, which does actually work with any
refcount width, but invoking qemu-img directly leads to the
refcount_bits value being visible in the output; use _make_test_img
instead which will filter it out.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bit width of every refcount entry to the format-specific
information.
In contrast to lazy_refcounts and the corrupt flag, this should be
always emitted, even for compat=0.10 although it does not support any
refcount width other than 16 bits. This is because if a boolean is
optional, one normally assumes it to be false when omitted; but if an
integer is not specified, it is rather difficult to guess its value.
This new field breaks some test outputs, fix them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add virtio MMIO support.
Add virtio-blk-test MMIO test case.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-6-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This malloc is a basic interface implementation that works for any platform.
It should be replaced in the future for a real malloc implementation for each
of the platforms.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-5-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert PCI-specific constants names of libqos virtio driver.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-4-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Modularize functions in virtio-blk-test and add PCI suffix for PCI specific
components.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-3-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert use of pointers in functions of virtio to uint64_t in order to make it
platform-independent.
Add casting from pointers (in PCI functions) to uint64_t and vice versa through
uintptr_t.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-2-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will allow the PC code to use the header, and lets us eliminate the
QEMU_INCLUDES hack inside tests/Makefile.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This adds a test for reentering a coroutine that previously yielded to a
coroutine that has meanwhile terminated.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
more trivial changes as more code has been rewritten in C.
we also got rid of extra Scope operators.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds alternative ACPI table blob selection for testing
non default QEMU configurations. If blob file for test
variant is not present, fallback to default blob.
With this change implement testing with a coldplugged
bridge.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI0._CRS was moved into SSDT and became the same for
PIIX4/Q35 machines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
A bunch of code moved from dsdt to ssdt,
plus we got trivial changes like 0->Zero which our test
dosn't recognize as identity yet.
Update expected files to suppress test warning.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU4hugAAoJEL/70l94x66DZXEH/i72tOgvKZfAjfq2xmHXNEsr
roCfTFIIjKK7feyW6YgwT5pgex6I5umFsO+uIyI/wbu8nDl/3NYEQBT4fR2cGfli
GKeJOEu8kf+Zt8U+fbxyVQclbuU5S0Ujsg1fX4QXC4swB5fGLT2cRWJ5qd6hKBQs
GflBuLa7h4eOzcTtOPpqRIwZ8mQE0uxv/hKq9kYLKHXJN2aWsiOls8KQ2CXj2yAl
p6bMS5f0H0S/1hvQcQV9EazX7owlPIEet3AmSL1TC2sjJ8hrNGMBoFPtUys1uqjc
B3CwuGi0JtWIduFYV9vZ/Ze4G7Y2iZlqc5vDxIl94d+iFmoHymDOi3mFUZ3H8XQ=
=Lk9p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- vhost-scsi: add bootindex property
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
# gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
Convert ram_list to RCU
exec: convert ram_list to QLIST
cosmetic changes preparing for the following patches
exec: protect mru_block with RCU
rcu: add g_free_rcu
rcu: introduce RCU-enabled QLIST
exec: RCUify AddressSpaceDispatch
exec: make iotlb RCU-friendly
exec: introduce cpu_reload_memory_map
docs: clarify memory region lifecycle
pci: split shpc_cleanup and shpc_free
pcie: remove mmconfig memory leak and wrap mmconfig update with transaction
memory: keep the owner of the AddressSpace alive until do_address_space_destroy
rcu: run RCU callbacks under the BQL
rcu: do not let RCU callbacks pile up indefinitely
vhost-scsi: set the bootable value of channel/target/lun
vhost-scsi: add a property for booting
vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface
vhost-scsi: add bootindex property
qdev: support to get a device firmware path directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add RCU-enabled variants on the existing bsd DQ facility. Each
operation has the same interface as the existing (non-RCU)
version. Also, each operation is implemented as macro.
Using the RCU-enabled QLIST, existing QLIST users will be able to
convert to RCU without using a different list interface.
Signed-off-by: Mike Day <ncmike@ncultra.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove "growable" option from the "open" command and from the qemu-io
command line. qemu-io is about to be converted to BlockBackend which
will make sure that no request exceeds the image size, so the only way
to keep "growable" would be to use BlockBackend if it is not given and
to directly access the BDS if it is.
qemu-io is a debugging tool, therefore removing a rarely used option
will have only a very small impact, if any. There was only one
qemu-iotest which used the option; since it is not critical, this patch
just removes it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-13-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Due to different error propagation, this breaks tests 051 and 087; fix
their output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While specifying a different driver and format is obviously invalid,
specifying the same driver once through driver and once through format
is invalid as well. Add a test for it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The argument given to bdrv_find_protocol() is just a file name, which
makes it difficult for the caller to reconstruct what protocol
bdrv_find_protocol() was hoping to find. This patch adds an Error
parameter to that function to solve this issue.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423666727-20777-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This case utilizes qemu-io command "aio_{read,write} -q" to verify the
effectiveness of IO throttling options.
It's implemented by driving the vm timer from qtest protocol, so the
throttling timers are signaled with determinied time duration. Then we
verify the completed IO requests are within 10% error of bps and iops
limits.
"null" protocol is used as the disk backend so that no actual disk IO is
performed on host, this will make the blockstats much more
deterministic. Both "null-aio" and "null-co" are covered, which is also
a simple cross validation test for the driver code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-6-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QMP command "block_set_io_throttle" expects underscores in parameters
instead of dashes: {iops,bps}_{rd,wr,max}.
Add optional argument conv_keys (defaults to True, backward compatible),
it will be used in IO throttling test case.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-5-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow test cases to run command in qtest protocol. It's
write-only for now.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds a test case for AHCI wherein we write a 4K
block of a changing pattern to sector 0, then
read back that 4K and compare the transmit and
receive buffers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-20-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A minor sanity check to assert that the sector size is 512.
The current block layer code deeply assumes that the IDE
sector size will be 512 bytes, so we carry forward that assumption
here.
This is useful for the DMA tests, which currently assume that
a sector will always be 512 bytes.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-19-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up guest memory being used in ahci_clean_mem, to be
called during ahci_shutdown. With all guest memory leaks removed,
add an option to the allocator to throw an assertion if a leak
occurs.
This test adds some sanity to both the AHCI library and the
allocator.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ahci_io is a wrapper around ahci_guest_io that takes a pointer to host
memory instead, and will create a guest memory buffer and copy the data
to/from as needed and as appropriate for a read/write command, such that
after a read, the guest data will be in a host buffer, and for a write,
the data will be transmitted to guest memory prior to the block operation.
Now that we have all the syntactic sugar functions in place for AHCI,
we can convert the identify test to be very, very short.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-17-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ahci_guest_io is a shorthand function that will, in one shot,
execute a data command on the guest to the specified guest buffer
location, in the requested amount.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds setters for size, prd_size and both via set_sizes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Helps to verify that a command completed successfully.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the AHCICommand structure, and a set of functions to
operate on the structure.
ahci_command_create - Initialize and create a new AHCICommand in memory
ahci_command_free - Destroy this object.
ahci_command_set_buffer - Set where the guest memory DMA buffer is.
ahci_command_commit - Write this command to the AHCI HBA.
ahci_command_issue - Issue the committed command synchronously.
ahci_command_issue_async - Issue the committed command asynchronously.
ahci_command_wait - Wait for an asynchronous command to finish.
ahci_command_slot - Get the number of the command slot we committed to.
Helpers:
size_to_prdtl - Calculate the required minimum PRDTL size from
a buffer size.
ahci_command_find - Given an ATA command mnemonic, look it up in the
properties table to obtain info about the command.
command_header_init - Initialize the command header with sane values.
command_table_init - Initialize the command table with sane values.
[Peter Maydell <peter.maydell@linaro.org> reported the following clang
warning:
tests/libqos/ahci.c:598:3: warning: redefinition
of typedef 'AHCICommand' is a C11 feature
[-Wtypedef-redefinition]
} AHCICommand;
I have replaced typedef struct ... AHCICommand; with struct ... ;
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a structure that defines some properties of various IDE commands.
These will be used to simplify the interface to the libqos AHCI calls,
lessening the redundancy of specifying and respecifying properties of
commands to various helper functions.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Similar to ahci_set_command_header, add a helper that takes an
in-memory representation of a command FIS and writes it to guest
memory, handling endianness as-needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1423158090-25580-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add human-readable command names and other miscellaneous #defines
to help make the code more readable.
Some of these definitions are not yet used in this current series,
but for convenience and sanity they have been lumped together here,
as it's more trouble than it is worth in a test suite to hand-pick,
one-by-one, which preprocessor definitions are useful per-each test.
These definitions include:
ATA Command Mnemonics
Current expected AHCI sector size
FIS magic bytes
REG_H2D_FIS flags
Command Header flags
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds a few helpers to help sanity-check the response of the
AHCI device after a command.
ahci_d2h_check_sanity inspects the D2H Register FIS,
ahci_pio_check_sanity inspects the PIO Setup FIS, and
ahci_cmd_check_sanity inspects the command header.
To support the PIO sanity check, a new structure is added for the
PIO Setup FIS type. Existing FIS types (H2D and D2H) have had their
members renamed slightly to condense reserved members into fewer
fields; and LBA fields are now represented by arrays of 8 byte chunks
instead of independent variables.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A simple helper that asserts a given port is not busy processing any
commands via the TFD, Command Issue and SACT registers.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A helper that compares a given port's current interrupts and checks them
against a supplied list of expected interrupt bits, and throws an error
if they do not match.
The helper then resets the requested interrupts on this port, and asserts
that the interrupt register is now empty.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ahci_port_check_error checks a given port's error registers and asserts
that everything from the port-level view is still OK.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds command header helper functions:
-ahci_command_header_set
-ahci_command_header_get,
-ahci_command_destroy, and
-ahci_cmd_pick
These helpers help to quickly manage the command header information in
the AHCI device.
ahci_command_header_set and get will store or retrieve an AHCI command
header, respectively.
ahci_cmd_pick chooses the first available but least recently used
command slot to allow us to cycle through the available command slots.
ahci_command_destroy obliterates all information contained within a
given slot's command header, and frees its associated command table,
but not its DMA buffer!
Lastly, the command table pointer fields (dba and dbau) are merged into
a single 64bit value to make managing 64bit tests simpler.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1423158090-25580-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The structure name is a bit of a misnomer; the structure currently named
command is actually the commandheader. A future patch in this series
will add an actual "Command" structure, so we'll rename it now before the
rest of the functions in this series try to use it.
In addition, rename the "b1" and "b2" fields
to be a unified uint16_t named "flags."
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423158090-25580-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a helper that assists in clearing out potentially old error and FIS
information from an AHCI port's data structures. This ensures we always
start with a blank slate for interrupt and FIS receipt information.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This helper identifies which port of the
AHCI HBA has a device we may run tests on.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With global state removed, code responsible for booting up,
verifying, and initializing the AHCI HBA is extracted and
inserted into libqos/ahci.c, which would allow for other
qtests in the future to quickly grab a meaningfully initialized
reference to an AHCI HBA.
Even without other users, functionalizing and isolating the code
assists future AHCI tests that exercise Q35 migration.
For now, libqos/ahci.o will be PC-only, but can be expanded into
something arch-agnostic in the future, if needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of re-querying the AHCI device for the FB and CLB buffers, save
the pointer we gave to the device during initialization and reference
these values instead.
[Peter Maydell <peter.maydell@linaro.org> reported the following clang
compiler warnings:
tests/libqos/ahci.c:256:40: warning: format specifies type 'unsigned
long' but the argument has type 'uint64_t'
(aka 'unsigned long long') [-Wformat]
g_test_message("CLB: 0x%08lx", ahci->port[i].clb);
tests/libqos/ahci.c:264:39: warning: format specifies type 'unsigned
long' but the argument has type 'uint64_t'
(aka 'unsigned long long') [-Wformat]
g_test_message("FB: 0x%08lx", ahci->port[i].fb);
The commit moved from uint32_t to uint64_t, so PRIx64 should be used for
the format specifier.
--Stefan]
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These macros were a bad idea: They relied upon certain arguments being
present locally with a specific name.
With the endgoal being to factor out AHCI helper functions outside of
the test file itself, these have to be replaced by more explicit helper
setter/getter functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a set of "static inline" register helpers that are intended to
replace the current set of macros with more functional versions that are
better suited to inclusion in libqos than porcelain macros.
As a stopgap measure before eliminating the porcelain macros, define them
to use the new functions defined in the ahci.h header.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make helper routines rely on the earmarked
guest allocator object with AHCIQState/QOSSTate instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rely on the PCI Device's bus pointer instead.
One less global to worry about.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move barsize, ahci_fingerprint and capabilities registers into
the AHCIQState object, removing global ahci-related state
from the ahci-test.c file.
More churn, less globals.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Store the HBA memory base address in the new state object, to simplify
function prototypes and encourage a more functional testing style.
This causes a lot of churn, but this patch is as "simplified" as I could
get it to be. This patch is therefore fairly mechanical and straightforward:
Any case where we pass "hba_base" has been consolidated into the AHCIQState
object and we pass the one unified parameter.
Any case where we reference "ahci" and "hba_state" have been modified to use
"ahci->dev" for the PCIDevice and "ahci->hba_state" to get at the base memory
address, accordingly.
Notes:
- A needless return is removed from start_ahci_device.
- For ease of reviewing, this patch can be reproduced (mostly) by:
# Replace (ahci, hba_base) prototypes with unified parameter
's/(QPCIDevice \*ahci, void \*\?\*hba_base/(AHCIQState *ahci/'
# Replace (ahci->dev, hba_base) calls with unified parameter
's/(ahci->dev, &\?hba_base)/(ahci)/'
# Replace calls to PCI config space using "ahci" with "ahci->dev"
's/qpci_config_\(read\|write\)\(.\)(ahci,/qpci_config_\1\2(ahci->dev,/'
After these, the remaining differences are easy to review by hand.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Create an operations structure so that the libqos interface can be
architecture agnostic, and create a pc-specific interface to functions
like qtest_boot.
Move the libqos object in the Makefile from being ahci-test only to
being linked with all tests that utilize the libqos features.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To avoid the architecture-specific implementations of the generic qtest
allocator having to know about fields within the allocator, add a
page_size setter method for users or arch specializations to use.
The allocator will assume a default page_size for general use, but it
can always be overridden.
Since this was the last instance of code directly using properties of the
QGuestAllocator object directly, modify the type to be opaque and move
the structure inside of malloc.c.
mlist_new, which was previously exported, is made static local to malloc.c,
as it has no external users.
[Peter Maydell <peter.maydell@linaro.org> reported the following clang
warning:
tests/libqos/malloc.c:35:3: warning:
redefinition of typedef 'QGuestAllocator' is a C11 feature
[-Wtypedef-redefinition]
} QGuestAllocator;
I converted typedef struct ... QGuestAllocator; to struct ...;
--Stefan]
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Marc Marí <marc.mari.barcelo@gmail.com>
Message-id: 1421698563-6977-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow a generic interface to alloc_init_flags,
not just through pc_alloc_init_flags.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a va_list variant of the qtest_boot function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The intent of this file is to serve as a misc. utilities file to be
shared amongst tests that are utilizing libqos facilities.
In a later patch, migration test helpers will be added to libqos.c that
will allow simplified testing of migration cases where libqos is
"Just Enough OS" for migrations testing.
The addition of the AHCIQState structure will also allow us to eliminate
global variables inside of qtests to manage allocators and test instances
in a better, more functional way.
libqos.c:
- Add qtest_boot
- Add qtest_shutdown
libqos.h:
- Create QOSState structure for allocator and QTestState.
ahci-test.c:
- Move qtest_boot and qtest_shutdown to libqos.c/h
- Create AHCIQState to interface with new qtest_boot/shutdown prototypes
- Modify tests slightly to use new types.
For now, the new object file is only linked to ahci-test, because it still
relies on pc architecture specific code in libqos. The next two patches will
reorganize the code to be more general.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extract defines and other information to ahci.h, to be shared with other
tests if they so please.
At the very least, reduce clutter in the test file itself.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the list-specific initialization over into
malloc.c, to keep all of the list implementation
details within the same file.
The allocation and freeing of these structures are
now both back within the same layer.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1421698563-6977-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When the drive-mirror block job is completed, it will call bdrv_swap()
on the source and the target BDS; this should obviously not result in a
segmentation fault.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423256778-3340-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu process does not always need to be killed, just waiting for it
can be fine, too. This introduces a way to do so.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423256778-3340-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This needs to go away sooner or later, but one complication is the
complex VFIO data structures that are modified in instance_finalize.
Take a shortcut for now.
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch makes use of the Error object for nbd_receive_negotiate() so
that errors during negotiation look nicer.
Furthermore, this patch adds an additional error message if the received
magic was wrong, but would be correct for the other protocol version,
respectively: So if an export name was specified, but the NBD server
magic corresponds to an old handshake, this condition is explicitly
signaled to the user, and vice versa.
As these messages are now part of the "Could not open image" error
message, additional filtering has to be employed in iotest 083, which
this patch does as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
_make_test_img sets up an NBD server, _cleanup_test_img shuts it down;
thus, _cleanup_test_img has to be called before _make_test_img is
invoked another time.
Furthermore, the pipe through _filter_test_img was unnecessary;
_make_test_img already takes care of that.
And finally, a filter is added to _filter_img_info to replace
"nbd://127.0.0.1:10810" by "TEST_DIR/t.IMGFMT", since the former is the
way to express the full image path (normally the latter) for NBD tests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In case of NBD, _make_test_img starts a new NBD server. Therefore,
_cleanup_test_img (which shuts that server down) has to be invoked
before the next _make_test_img call in order to make 100 work for NBD.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of 8f9e835fd2, probing should be
disabled in the qemu-iotests (at least when using qemu-io). This broke
083's reference output (which consisted mostly of "Could not read image
for determining its format").
This patch fixes it.
Note that one case which failed before is now successful: Disconnect
after data. This is due to qemu having read twice before (once for
probing, once for the qemu-io read command), but only once now (the
qemu-io read command). Therefore, reading is successful (which is
correct).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These tests exercise error code paths in the QED image format. The
tests are very simple, they just prove that the error path exits
cleanly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1421065893-18875-3-git-send-email-stefanha@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Managing applications, like oVirt (http://www.ovirt.org), make extensive
use of thin-provisioned disk images.
To let the guest run smoothly and be not unnecessarily paused, oVirt sets
a disk usage threshold (so called 'high water mark') based on the occupation
of the device, and automatically extends the image once the threshold
is reached or exceeded.
In order to detect the crossing of the threshold, oVirt has no choice but
aggressively polling the QEMU monitor using the query-blockstats command.
This lead to unnecessary system load, and is made even worse under scale:
deployments with hundreds of VMs are no longer rare.
To fix this, this patch adds:
* A new monitor command `block-set-write-threshold', to set a mark for
a given block device.
* A new event `BLOCK_WRITE_THRESHOLD', to report if a block device
usage exceeds the threshold.
* A new `write_threshold' field into the `BlockDeviceInfo' structure,
to report the configured threshold.
This will allow the managing application to use smarter and more
efficient monitoring, greatly reducing the need of polling.
[Updated qemu-iotests 067 output to add the new 'write_threshold'
property. --Stefan]
[Changed g_assert_false() to !g_assert() to fix the build on older glib
versions. --Kevin]
Signed-off-by: Francesco Romani <fromani@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is necessary to suppress the "probed raw" warning when
running raw over nbd tests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a bug in the recently added sys.platform test, and we no longer
run python tests, because "linux2" is the value to compare here. So do a
prefix match. According to python doc [1], the way to use sys.platform
is "unless you want to test for a specific system version, it is
therefore recommended to use the following idiom":
if sys.platform.startswith('freebsd'):
# FreeBSD-specific code here...
elif sys.platform.startswith('linux'):
# Linux-specific code here...
[1]: https://docs.python.org/2.7/library/sys.html#sys.platform
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
One of the annoyances of the current migration format is the fact that
it's not self-describing. In fact, it's not properly describing at all.
Some code randomly scattered throughout QEMU elaborates roughly how to
read and write a stream of bytes.
We discussed an idea during KVM Forum 2013 to add a JSON description of
the migration protocol itself to the migration stream. This patch
adds a section after the VM_END migration end marker that contains
description data on what the device sections of the stream are composed of.
This approach is backwards compatible with any QEMU version reading the
stream, because QEMU just stops reading after the VM_END marker and ignores
any data following it.
With an additional external program this allows us to decipher the
contents of any migration stream and hopefully make migration bugs easier
to track down.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A bunch of fixes all over the place. Also, beginning to generalize acpi build
code for reuse by ARM.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUx465AAoJECgfDbjSjVRpzewIAI/tzV1oCR1D/YDYBYpiK68W
85JJbyR90DpS9unjrkeUHEnJgkegCk8dMXlWJOlshpwxDw2khC2ol0yS6siwC6Z/
1peL9E5zHz2H8KWfH6JlhqLETovZxjd5Uv3q1mWULvK+zZcPzeQDCky5I8mbEw4b
0LGDGX8mcLlDnit9mnAbgHu7cbqGa0jtXoJTFveKdxQtHdyj4cAg0wCjOLhnEo6s
fJP7K1TJ2Ptiwwlk2cnj8T4Z9AoJkWjpFfr94dST2KqR3z5j8OUZYYhifrZa3e8t
qxO/UatY4IwSnsmWCn/hvzlHZFa03sc9nPIkAlj96j78sHqPafDJxCdnwlX8pF8=
=Kfwr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place. Also, beginning to generalize acpi build
code for reuse by ARM.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 27 Jan 2015 13:12:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc-dimm: Add Error argument to pc_existing_dimms_capacity
pc-dimm: Make pc_existing_dimms_capacity global
pc: Fix DIMMs capacity calculation
smbios: Don't report unknown CPU speed (fix SVVP regression)
smbios: Fix dimm size calculation when RAM is multiple of 16GB
bios-linker-loader: move source to common location
bios-linker-loader: move header to common location
virtio: fix feature bit checks
bios-tables-test: split piix4 and q35 tests
acpi: build_append_nameseg(): add padding if necessary
acpi: update generated hex files
acpi-test: update expected DSDT
pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled
pci: Split pcie_host_mmcfg_map()
Add some trace calls to pci.c.
ich9: add disable_s3, disable_s4, s4_val properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes it clear which one is failing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Previous patch
pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled
changed DSDT, update expected test files.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- New "edu" device (v1->v2: fix 32-bit compilation)
- Disabling HLE and RTM on Haswell & Broadwell
- kvm_stat updates
- Added --enable-modules to Travis, in preparation for switching
the default
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUxiioAAoJEL/70l94x66D+zQIAKVq9DPm4RNJ2/c2nt6phAVr
6Z5yB+TMf4BKFORwVkionvIOEqOC0pdm3oo93/XH7DTsN7pFg7rdwJl+ADESgvl6
+tpUbrgjZuCuNQNXy/mjx0EJQUmTk8/x+a054hSo6XNvs2ZM9HjaKNX3ojS6pG1J
mhIH4cjGPMCwu2hgm2mho/1zdIs4Qk3xT8Uzfq8i5gES14YX0Fmt93idUn3DRs7m
zHdzHWr0JmXfZweNDdPgsfGO6g+NnwgGUOqeGY4Ucmurkepk9ViCaaJP7lOnuRhT
52isayOrfrZsSLm5xxwtSUjmgbxzlOEit1b8jLzpHb5b9b+LJiCtuJnN7vwHb34=
=jgup
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- Many fixes from the floor as usual
- New "edu" device (v1->v2: fix 32-bit compilation)
- Disabling HLE and RTM on Haswell & Broadwell
- kvm_stat updates
- Added --enable-modules to Travis, in preparation for switching
the default
# gpg: Signature made Mon 26 Jan 2015 11:44:40 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
kvm_stat: Add RESET support for perf event ioctl
target-i386: Disable HLE and RTM on Haswell & Broadwell
sparse: Fix build with sparse on .S files
exec: fix madvise of NULL pointer
.travis.yml: Add "--enable-modules"
apic: do not dereference pointer before it is checked for NULL
kvm_stat: Print errno when syscall to perf_event_open() fails
kvm_stat: Update exit reasons to the latest defintion
kvm_stat: Add aarch64 support
hw: misc, add educational driver
vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*
qemu-timer: introduce timer_deinit
qemu-timer: add timer_init and timer_init_ns/us/ms
target-i386: make xmm_regs 512-bit wide
target-i386: use vmstate_offset_sub_array for AVX registers
tests/multiboot: Add test for modules
multiboot: Fix offset of bootloader name
tests/multiboot: Update reference output
pc: fix KVM features in pc-1.3 and earlier machine types
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test case is meant to detect corruptions of the Multiboot modules
as well as the multiboot modules list and the module command lines.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The changes look okay (larger PCI hole, some rounding differences), so
just update the reference output of the test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test 064 reads a lot of data at once which currently results in qemu-io
having to allocate up to about 1 GB of memory (958 MB, to be exact).
This patch lowers that amount to 128 MB by making the test read smaller
chunks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1422025185-25229-1-git-send-email-mreitz@redhat.com
Modify some of tests/test-vmstate.c due to qemu_bufopen() change.
If you create a QEMUSizedBuffer yourself, you have to explicitly
free it.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
recieve -> receive
suprise -> surprise
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove unused variable test_image; this silences a clang warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
unsigned long is not large enough to represent 1000000000 * duration there.
Just use floating point.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417518350-6167-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If I understand correctly, qemu-iotests never meant to be portable. We
only support Linux for all the shell cases, but didn't specify it for
python tests. Now add this and default all the python tests as Linux
only. If we cares enough later, we can override the parameter in
individual cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Other cases have this, and this test is not portable as well, as we want
to add "make check-block" to "make check", it shouldn't fail on Mac OS
X.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The former is not portable because on Mac OSX it is /usr/bin/true.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The allocator in malloc-pc has been extracted, so it can be used in every arch.
This operation showed that both the alloc and free functions can be also
generic.
Because of this, the QGuestAllocator has been removed from is function to wrap
the alloc and free function, and now just contains the allocator parameters.
As a result, only the allocator initalizer and unitializer are arch dependent.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Filter out the "main loop: WARNING: I/O thread spun for..." warning from
qemu output (it hardly matters for code specifically testing I/O).
Furthermore, use _filter_qemu in all the custom functions which run
qemu.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This applies cases on drive-backup on blockdev-backup, except cases with
target format and mode.
Also add a case to check source == target.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes, qemu does not have a filename to work with, so it does not
know which directory to use for a backing file specified by a relative
filename. Add a test which tests that qemu exits with an appropriate
error message.
Additionally, add a test for qemu-img create with a backing filename
relative to the backed image's base directory while omitting the image
size.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using /tmp, which is usually mounted as tmpfs, the quick group can be
quicker.
On my laptop (Lenovo T430s with Fedora 20), this reduces the time from
50s to 30s.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The splitting of qemu-file and addition of the buffered file landed
at the same time; so now split the buffered file code out.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The migration code now occupies a fair chunk of the top level .c
files, it seems time to give it it's own directory.
I've not touched:
arch_init.c - that's mostly RAM migration but has a few random other
bits
savevm.c - because it's built target specific
This is purely a code move; no code has changed.
- it fails checkpatch because of old violations, it feels safer
to keep this as purely a move and fix those at some mythical future
date.
The xbzrle and vmstate tests are now only run for softmmu builds
since they require files in the migrate/ directory which is only built
for softmmu.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This is simply:
$ cd tests/qemu-iotests; sed -i -e 's/ *$//' *.out
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test 039 used qemu-io -c abort for simulating a qemu crash; however,
abort() generally results in a core dump and ulimit -c 0 is no reliable
way of preventing that. Use "sigraise $(kill -l KILL)" instead to have
it crash without a core dump.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1418032092-16813-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_filter_qemu_io already filters out the process ID when qemu-io is
aborted; the same should be done when it is killed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1418032092-16813-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for vmdk files which use a file with a JSON file name, and
which then try to open extents. That should fail and the error message
should at least try to look helpful.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417615043-26174-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMDK extent parsing code doesn't handle the JSON file name, so the case
fails for these subformats. Disabled them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1417571370-19495-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.
This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for creating and amending images (amendment uses the creation
options) with formats not supporting creation over protocols not
supporting creation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There may be NBD tests which do not create a sample image and simply
test whether wrong usage of the protocol is rejected as expected. In
this case, there will be no NBD server and trying to kill it during
clean-up will fail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two instances of iotest 059 using qemu-io on a qcow2 image. As
of "qemu-iotests: Use qemu-io -f $IMGFMT" the iotests can no longer rely
on $QEMU_IO doing probing, therefore the qcow2 format has to be
specified explicitly here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 082.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 060.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a qcow2 image specifies a backing file format that doesn't correspond
to any format driver that qemu knows, we shouldn't fall back to probing,
but simply error out.
Not looking up the backing file driver in bdrv_open_backing_file(), but
just filling in the "driver" option if it isn't there moves us closer to
the goal of having everything in QDict options and gets us the error
handling of bdrv_open(), which correctly refuses unknown drivers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2 specification requires that the header extension data be
padded to round up the extension size to the next multiple of 8 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After reading the extension header, offset is incremented, but not
checked against end_offset any more. This way an integer overflow could
happen when checking whether the extension end is within the allowed
range, effectively disabling the check.
This patch adds the missing check and a test case for it.
Cc: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is forbidden if the raw driver was probed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-10-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The original intention was to pipe stderr of qemu into $fifo_out.
However, the redirections were specified in the wrong order for this.
This patch fixes it.
Now qemu's output on stderr can be retrieved with _send_qemu_cmd, which
applies several useful filters on the output that were missing before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-9-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-5-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch changes $QEMU_IO so that all tests by default pass a format
argument to qemu-io.
There are a few cases where -f $IMGFMT is not wanted because it selects
the wrong driver or json: filenames including a driver are used. They
are changed to use $QEMU_IO_PROG, which doesn't include any options.
Tests 071 and 081 have output changes because now the actual request
fails instead of reading the 2k probing buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When which(1) is not installed, we would complain "perl not found"
because it's the first set_prog_path check. The error message is
wrong.
Fix it by using "command -v", a native way to query the existence of a
command.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1416380832-9697-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add one test whether blkdebug is able to generate a plain filename if
given a configuration file and a file to be tested only; and add another
test whether blkdebug is able to do the same without being given a
configuration file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of actually recreating the options from scratch, just reuse the
options given for creating the BDS, which are the configuration file
name and additional options. In case there are no additional options we
can thus create a plain filename.
This obviously results in a different output for qemu-iotest 099 which
exactly tests this filename generation. Fix it up as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
067 invokes query-block, resulting in a reference output with really
long lines (which may pose a problem in email patches and always poses a
problem when the output changes, because it is hard to see what has
actually changed). Use -qmp-pretty to mitigate this issue.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
_filter_qmp should be able to correctly filter out the QMP version
object for pretty JSON output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes it simpler to keep the SSDT byte-for-byte identical for a
given machine type, which is a goal we want to have for 2.2 and newer
types.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check that entry instruction raises window overflow exception when
PS.CALLINC points to live registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The block layer read and write functions do not like requests which are
bigger than INT_MAX bytes. Since the VDI bmap is read and written in a
single operation, its size is therefore limited accordingly. This
reduces the maximum VDI image size supported by QEMU to half of what it
currently is (down to approximately 512 TB).
The VDI test 084 has to be adapted accordingly. Actually, one could
clearly see that it was broken from the "Could not open
'TEST_DIR/t.IMGFMT': Invalid argument" line for an image which was
supposed to work just fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Test the error message when a COW file is about to be created which is
supposed to inherit the size of its backing file, while the backing file
given does not actually exist.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After commit 89b516d8, some logics is turbid and
breaks 'make check' as below errors:
tests/vhost-user-test.c: In function '_cond_wait_until':
tests/vhost-user-test.c:154: error: 'G_TIME_SPAN_SECOND' undeclared (first use in this function)
tests/vhost-user-test.c:154: error: (Each undeclared identifier is reported only once
tests/vhost-user-test.c:154: error: for each function it appears in.)
tests/vhost-user-test.c: In function 'read_guest_mem':
tests/vhost-user-test.c:192: warning: implicit declaration of function 'g_get_monotonic_time'
tests/vhost-user-test.c:192: warning: nested extern declaration of 'g_get_monotonic_time'
tests/vhost-user-test.c:192: error: 'G_TIME_SPAN_SECOND' undeclared (first use in this function)
make: *** [tests/vhost-user-test.o] Error 1
First, vhost-usr-test.c rely on glib-compat.h because
of using G_TIME_SPAN_SECOND [glib < 2.26] and g_get_monotonic_time(),
but vhost-usr-test.c defined QEMU_GLIB_COMPAT_H, which make
glib-compat.h will not be included.
Second, if we remove QEMU_GLIB_COMPAT_H definability in
vhost-usr-test.c, then we will get below warnings:
tests/vhost-user-test.c: In function 'read_guest_mem':
tests/vhost-user-test.c:190: warning: passing argument 1 of 'g_mutex_lock' from incompatible pointer type
tests/vhost-user-test.c:234: warning: passing argument 1 of 'g_mutex_unlock' from incompatible pointer type
That's because glib-compat.h redefine the g_mutex_lock/unlock
function. Those functions' arguments is CompatGMutex/CompatGCond,
but vhost-user-test.c is using GMutex/GCond, which cause the type
is not consistent.
We can rerealize those functions of vhost-user-test.c,
which need a lots of patches. Let's simply address it, and
leave this file alone.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1415149259-6188-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUV65JAAoJECgfDbjSjVRpqzgIAJJDaU95xdtl/snSJVbSGsgR
2YW8mC8pjkZnV8fbu7F1vOTJSpAhj0eeXaDTqtbBhgAqBlqQ5tWAT9xDnUIlBlHN
GVTWzWaifVOGMj087Ovvy9+4NyfsuvTlf3aOjvLfqlaDqI5dbZQAyIdHNFyV7Qy9
txgAcERp+caZ4rN8XgAv82KV1JGj8PXermTgLJ+DcqYxhwWm66eEviQ+f+F5YImJ
CJQ6HFPXjclxHCuyKBL334SIwq8IfYyUUkIsGgKCNuHPUud7r2rqsIlRfeZBwLf9
igUgf4iPQL5TNVq9qwQmnTK6ddHTqHZmGyu902WxHK/N0EDq4dLw8diqFhZxo9Y=
=f7Rb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio, misc bugfixes
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vga: flip qemu 2.2 pc machine types from cirrus to stdvga
vga: add default display to machine class
vhost-user: fix mmap offset calculation
hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup()
smbios: Encode UUID according to SMBIOS specification
pc: Add pc_compat_2_1() function
hw/virtio/vring/event_idx: fix the vring_avail_event error
hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile
hw/pci: fixed error flow in pci_qdev_init
-machine vmport=off: Allow disabling of VMWare ioport emulation
acpi/cpu-hotplug: introduce helper function to keep bit setting in one place
cpu-hotplug: rename function for better readability
qom/cpu: remove the unused CPU hot-plug notifier
pc: Update rtc_cmos in pc_cpu_plug
pc: add cpu hotplug handler to PC_MACHINE
acpi:piix4: convert cpu hotplug to hotplug_handler API
acpi:ich9: convert cpu hotplug to hotplug_handler API
acpi/cpu: add cpu hotplug callback function to match hotplug_handler API
acpi: create separate file for TCPA log
tests: fix rebuild-expected-aml.sh for acpi-test rename
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJUV2wdAAoJEJykq7OBq3PIjcAH/29rl938ETw1wjXxYe3uH+R6
K2yFEiPh9/cOJSH0mJ+gD8DZIN+iyR4eoQGP2s5ALFPcX3bkYxRLlUeYK0BCp883
esc7gO6XPhLvTVqP0xgACRCdUwH2I0VTToDlHjXXZogyI/DuDX3gzWJufE3x1DGs
WNTMOp5n/uYkWH3rI3DkInmbSddEz3pgX65a8BuYtw0V/RSeSRnHKDYHMygvJBRL
EVfWRNeOIrZ730CyJry0t8ITjsZxiBDKXR5glNSwaIfQUfGkTSWi9YNSurNYkUDr
aMS2rgvOVlrOUDKTHUj9oS3jgoGWcDtlk9E1MeSoyIptbRoMhdFVl1AUJZsrMJU=
=Mfbu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add some tests for progress output to 061.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As discussed during review a follow up for Max's fix.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1414249537-29257-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for qcow2's fast bdrv_make_empty implementation on images
without internal snapshots.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-15-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for qemu-img commit on backing chains with more than two
images. This test also checks whether the top image is emptied (unless
this is prevented by specifying either -d or -b) and does therefore not
work for qed and vmdk which requires it to be separate from 020.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-14-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As different image formats most probably map guest addresses to
different host addresses, add a filter to filter the host addresses out;
also, the image filename should be filtered.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-13-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As of a follow-up patch to this one, the length of a mirror block job
will no longer directly depend on the size of the block device;
therefore, drop these checks from this test. Instead, just check whether
the final offset equals the block job length.
As 041 uses the wait_until_completed function from iotests.py, the same
applies there as well which in turn affects tests 030, 055 and 056. On
the other hand, a block job's length does not have to be related to the
length of the image file in the first place, so that check was
questionable anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-7-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It should not be happening, but it is possible to truncate an image
outside of qemu while qemu is running (or any of the qemu tools using
the block layer. raw_co_get_block_status() should not break then.
While touching this test, replace the existing "truncate" invocation by
"$QEMU_IMG convert -f raw".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414148280-17949-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is simple test image for the following commit made by me.
commit d25d598020
Author: Denis V. Lunev <den@openvz.org>
Date: Mon Jul 28 20:23:55 2014 +0400
parallels: 2TB+ parallels images support
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-3-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The image was generated using http://openvz.org/Ploop utility and properly
filled with the same content as original one.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1412759610-2257-2-git-send-email-den@openvz.org
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Xtensa cores have configurable interrupt vectors and endiannes. This
information is needed to link executable images correctly for a specific
core configuration. Instead of hard-coding dc232 defaults pull endianness,
number of high-priority interrupts and location of vectors from the core
configuration and pass it through the C preprocessor.
While at it clean up tabs and align the initial stack on 16 bytes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This is now called bios-tables-test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The test code needs osdep.h for the ARRAY_SIZE macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Updating the L1 table should not result in random data being written.
This adds a test for that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for qemu-img map and qemu-io -c map on truncated files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are certain cases where repairing a qcow2 image might actually
damage it further (or rather, where repairing it has in fact damaged it
further with the old qcow2 check implementation). This should not
happen, so add a test for these cases.
Furthermore, the repair function now repairs refblocks beyond the image
end by resizing the image accordingly. Add several tests for this as
well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
039, 060 and 061 all create images with referenced clusters having a
refcount of 0. Because previous commits changed handling of such errors,
these tests now have a different output. Fix it.
Furthermore, 060 created a refblock with a refcount greater than one
which now results in having to rebuild the refcount structure as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to possible automatic regression and performance
testing for the block layer I found that the iotests don't work
for all protocols anymore.
In commit 1f7bf7d0 I started to change supported protocols from
generic to file for various tests. Unfortunately, some tests
added in the meantime again carry generic protocol altough they
can only work with file because they require local file access.
The other way around for some tests that only support file I added
NFS protocol after confirming they work.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes compilation errors when building against glib <2.28.0
due to the missing g_get_monotonic_time() function.
The compilation error in tests/libqos/virtio.c was introduced in commit
70556264a8 ("libqos: use microseconds
instead of iterations for virtio timeout").
Add a simple g_get_monotonic_time() implementation to glib-compat.h
based on code from vhost-user-test.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Igor: add G_TIME_SPAN_SECOND, include glib-compat.h in libqtest.h]
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
checks that it's possible to hotplug usb-uas HBA and
then if it's possible to hot(un)plug scsi-disk to it.
Thest basically covers hot(un)plug on dummy HBAs
without means of hot(un)plug notification of the guest.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
usb-storage is different from usual usb devices
in that it uses a child SCSI bus for underlying storage.
This commit verifies that the SCSI bus is hotpluggable, as
hotplug operation wouldn't succeed without it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
use usb-tablet as a hotplugged usb device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move code necessary for testing uhci port into library
so it could be used by other USB tests.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Functions will be used for testing hot(un)plug of PCI devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Separate the QEMUFile interface from the implementation, to reduce
dependencies from code using QEMUFile.
All the code that is being moved to the new file is exactly the same
code that was on savevm.c (moved by commit
093c455a8c), so I am using the copyright
and license header from savevm.c for the new file.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Modify some of tests/test-vmstate.c to use the in memory file based
on QEMUSizedBuffer to provide basic testing of QEMUSizedBuffer and
the associated memory backed QEMUFile type.
Only some of the tests are changed so that the fd backed QEMUFile is
still tested.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Executed in this order, drive_del and device_del's automatic drive
deletion take notoriously tricky special paths.
[Fixed "an device" -> "a device" typo as requested by Eric Blake.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-7-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-6-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-5-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The first argument should be a PCI address, which pci-addr=auto isn't.
Doesn't really matter, as drive_add ignores its first argument when
its second argument has if=none. Clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-4-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QMP accepts both single and double quotes. This is the only test
using double quotes. They need to be quoted in C strings. Replace
them by single quotes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each of qdev-monitor-test and blockdev-test has just one test case,
and both are about drive_del.
[Extended copyright from 2013 to 2013-2014 as requested by Eric Blake.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-2-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "corrupt" entry in the format-specific information section should be
"true".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just like lazy-refcounts, this field will be present iff the qcow2
compat level is 1.1 (or probably any future revision).
As expected, this breaks some tests due to the new field present in
qemu-img info output; so fix their output accordingly.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-img info should only be used directly if the format-specific
information or the name of the format is relevant (some tests explicitly
test format-specific information; test 082 uses qcow2-specific settings
to test the qemu-img interface); otherwise, tests should always use
_img_info instead.
Test 082 was touched only partially. It does test the qemu-img
interface; however, its invocations of qemu-img info are not real tests
but rather verifications, so if format-specific information is not
important for the test, there is no reason not to use _img_info. In
contrast to directly invoking qemu-img info, "qcow2" is replaced by
"IMGFMT"; but as "qcow2" is only mentioned once in test 082 (in
_supported_fmt), I consider this an improvement.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412105489-7681-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the Q35 board types are to begin recognizing
and decoding syntactic sugar for drive/device
declarations, then workarounds found within
the qtests suite need to be adjusted to prevent
any test failures after the fix.
bios-tables-test improperly uses this cli:
-drive file=etc,id=hd -device ide-hd,drive=hd
Which will create a drive and device due to
the lack of specifying if=none. Then, it will
attempt to create a second device and fail.
This patch corrects this test to always use
the full, non-sugared -device/-drive syntax
for both PC and Q35.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The requirement for this test case is really "no O_DIRECT", because the
temporary snapshot for BDRV_O_SNAPSHOT is created in /tmp, which often
is a tmpfs.
Commit f210a83c ('qemu-iotests: Add _default_cache_mode and
_supported_cache_modes') turned the restriction into writethrough-only,
but that's not really necessary.
Allow to run the test for any non-O_DIRECT cache modes, and use the
global default of writeback if no cache mode is specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When qemu-iotests only gave a choice between cache=none and
cache=writethrough, we picked cache=none because it was the option that
would complete the test in finite time. Some tests could only work for
one of the two options and would be skipped with cache=none, but that
was an acceptable trade-off at the time.
Today, however, qemu-iotests is a bit more flexible than that and you
can specify any of the cache modes supported by qemu. The default is
writeback, like in qemu, which is fast and (unlike cache=none) compatible
with any host filesystem. Test cases that have specific requirements for
the cache mode can also specify a different default.
In order to get a fast test run that works everywhere and doesn't skip
tests that need a different cache mode, not specifying any cache mode
and instead relying on the default is the best we can do today.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1412076430-11623-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some hosts are slow or overloaded so test execution takes a long time.
Test cases use timeouts to protect against an infinite loop stalling the
test forever (especially important in automated test setups).
Commit 6cd14054b6 ("libqos virtio:
Increase ISR timeout") increased the clock_step() value in an attempt to
lengthen the virtio interrupt wait timeout, but timeout failures are
still occuring on the Travis automated testing platform.
This is because clock_step() only affects the guest's virtual time.
Virtio requests can be bottlenecked on host disk I/O latency - which
cannot be improved by stepping the clock, so the fix was ineffective.
This patch changes the qvirtio_wait_queue_isr() and
qvirtio_wait_config_isr() timeout mechanism from loop iterations to
microseconds. This way the test case can specify an absolute 30 second
timeout. Number of loop iterations is not a reliable timeout mechanism
since the speed depends on many factors including host performance.
Tests should no longer timeout on overloaded Travis instances.
Cc: Marc Marí <marc.mari.barcelo@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
