Use a common function to generate the "If:..." line.
While at it, get rid of the existing \n\n (no idea why it was
there). Use a line-break in member description, this seems to look
slightly better in the plaintext version.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-19-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wrap generated enum and struct members and their supporting code with
#if/#endif, using the .ifcond members added in the previous patches.
We do enum and struct in a single patch because union tag enum and the
associated variants tie them together, and dealing with that to split
the patch doesn't seem worthwhile.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-18-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Note that union discriminators may not have 'if' conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-14-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-15-marcandre.lureau@redhat.com>
[Patches squashed, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wherever a struct/union/alternate/command/event member with NAME: TYPE
form is accepted, desugar it to a NAME: { 'type': TYPE } form.
This will allow to add new member details, such as 'if' in the
following patch to introduce conditionals, or 'default' for default
values etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-13-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add condition to QAPIEvent enum members based on the event 'if'.
The generated code remains unconditional for now. Later patches
generate the conditionals (also there is no additional coverage of
this change in qapi-schema-test.out since the event_names enum is an
implicit type created by qapi/events.py).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-11-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaMember gains .ifcond for enum members: inherited classes,
such as QAPISchemaObjectTypeMember, will thus have an ifcond member
after this (those different types will also use the .ifcond to store
the condition and generate conditional code in the following patches).
The generated code remains unconditional for now. Later patches
generate the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Desugar the enum NAME form to { 'name': NAME }. This will allow to add
new enum members, such as 'if' in the following patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-7-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-8-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Harmless accidental move backed out, long line wrapped, patches
squashed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Report the set of missing or unknown keys. And give a hint about the
accepted keys.
The error message for multiple meta type members (visible in
tests/qapi-schema/double-type.err) is not improved.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-6-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Introduce a new helper function to check if the given keys are known,
and if mandatory keys are present. The function will be reused in
other places in the following code changes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-5-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 93bda4dd46 changed the internal representation of enum type
members from str to QAPISchemaMember, but we still print only a
string. Has been good enough, as the name is the member's only
attribute of interest, but that's about to change. To prepare, print
them more like object type members.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This will allow to add and access more properties associated with enum
values/members, like the associated 'if' condition. We may want to
have a specialized type QAPISchemaEnumMember, for now this will do.
Modify gen_enum() and gen_enum_lookup() for the same reason.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The generated C enumeration types explicitly set the enumeration
constants to 0, 1, 2, ... That's exactly what you get when you don't
supply values.
Drop the explicit values. No change now, but it will avoid gaps in
the values when we later add support for 'if' conditions. Avoiding
such gaps will save us the trouble of changing the ENUM_lookup[]
tables to work without a sentinel.
We'll have to take care to ensure the headers required by the 'if'
conditions get always included before the generated QAPI code.
Fortunately, our convention to include "qemu/osdep.h" first in any .c
ensures that's the case for our CONFIG_FOO macros.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-2-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's break the line before 'data'. While at it, improve a bit
indentation/spacing. (I removed some alignment which are not helping
much readability and become quickly inconsistent)
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181208111606.8505-26-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename QAPISchemaEnumType.values and related variables to members.
Makes sense ever since commit 93bda4dd4 changed .values from list of
string to list of QAPISchemaMember. Obvious no-op.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181208111606.8505-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
RFC8259 obsoletes RFC7159. Fix a couple of URLs to point to the
newer version.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181203175702.128701-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's make sure that the range handling code can properly deal with
ranges that end at the biggest possible number.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-10-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Basically copy all int64 list tests but adapt them to work on uint64
instead. The values for very big/very small values have to be adapted.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-9-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We now support virtual walks, so use that instead.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-8-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The input visitor has some problems right now, especially
- unsigned type "Range" is used to process signed ranges, resulting in
inconsistent behavior and ugly/magical code
- uint64_t are parsed like int64_t, so big uint64_t values are not
supported and error messages are misleading
- lists/ranges of int64_t are accepted although no list is parsed and
we should rather report an error
- lists/ranges are preparsed using int64_t, making it hard to
implement uint64_t values or uint64_t lists
- types that don't support lists don't bail out
- visiting beyond the end of a list is not handled properly
- we don't actually parse lists, we parse *sets*: members are sorted,
and duplicates eliminated
So let's rewrite it by getting rid of usage of the type "Range" and
properly supporting lists of int64_t and uint64_t (including ranges of
both types), fixing the above mentioned issues.
Lists of other types are not supported and will properly report an
error. Virtual walks are now supported.
Tests have to be fixed up:
- Two BUGs were hardcoded that are fixed now
- The string-input-visitor now actually returns a parsed list and not
an ordered set.
Please note that no users/callers have to be fixed up. Candidates using
visit_type_uint16List() and friends are:
- backends/hostmem.c:host_memory_backend_set_host_nodes()
-- Code can deal with duplicates/unsorted lists
- numa.c::query_memdev()
-- via object_property_get_uint16List(), the list will still be sorted
and without duplicates (via host_memory_backend_get_host_nodes())
- qapi-visit.c::visit_type_Memdev_members()
- qapi-visit.c::visit_type_NumaNodeOptions_members()
- qapi-visit.c::visit_type_RockerOfDpaGroup_members
- qapi-visit.c::visit_type_RxFilterInfo_members()
-- Not used with string-input-visitor.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-7-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Test that very big/small values are not accepted and that ranges with
only one element work. Also test that ranges are ascending and cannot
have more than 65536 elements.
Rename expect4 to expect5, as we will be moving that to a separate ulist
test after the rework.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-6-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's use the new function. Just as current behavior, we have to
consume the whole string (now it's just way clearer what's going on).
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-5-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The string-input-visitor happily accepts NaN and infinities when parsing
numbers (doubles). They shouldn't. Fix that.
Also, add two test cases, testing if "NaN" and "inf" is properly
rejected.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-4-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu_strtosz() & friends reject NaNs, but happily accept infinities.
They shouldn't. Fix that.
The fix makes use of qemu_strtod_finite(). To avoid ugly casts,
change the @end parameter of qemu_strtosz() & friends from char **
to const char **.
Also, add two test cases, testing that "inf" and "NaN" are properly
rejected. While at it, also fixup the function documentation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-3-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's provide a wrapper for strtod().
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-2-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcBpyAAAoJEHWtZYAqC0IRFugH/RxVUA48nJjOW2xVgxeSbBhn
LrkkNPtRp24Nr1dBpmcNRiOyFS5xmkAL6G6KdkZ21To5m7UBx7Lr+X1InSK2ePHS
jfTTuEA0w5yWHv95tNgJs0u6x2m58TKLiUoNWS5nAeOizgQ7k7s/Y6QEVdDrlHoO
CCaUxvDtuU9sYEUO8ccYx72GlK+Ak3BSYyFsiCIC6bT2aYa+RA74vlovmKP0RB5w
utjUuI3OOfS5MRAxBJ9OUiD55aufJQL7454wGb0tXWAurCnCAzTjNSCTD3psmEsg
xAInKFUVxYvnx+qEeOMgnf2dKuaPCJyYud6gztmIikEmJPXyZWiP3lViWxCIPEQ=
=9Br9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-12-04-1' into staging
Merge tpm 2018/12/04 v1
# gpg: Signature made Tue 04 Dec 2018 15:25:52 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-12-04-1:
tpm: Make sure the locality received from backend is valid
tpm: Make sure new locality passed to tpm_tis_prep_abort() is valid
tpm: Remove unused locty parameter from tpm_tis_abort()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
Patch produced with scripts/coccinelle/inplace-byteswaps.cocci
(with a couple of long lines manually wrapped).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210120436.30522-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
vfio-ap devices do not pin any pages in the host. Therefore, they
are compatible with memory ballooning.
Flag them as compatible, so both vfio-ap and a balloon can be
used simultaneously.
Cc: qemu-stable@nongnu.org
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just like on other architectures, we should stop the clock while the guest
is not running. This is already properly done for TCG. Right now, doing an
offline migration (stop, migrate, cont) can easily trigger stalls in the
guest.
Even doing a
(hmp) stop
... wait 2 minutes ...
(hmp) cont
will already trigger stalls.
So whenever the guest stops, backup the KVM TOD. When continuing to run
the guest, restore the KVM TOD.
One special case is starting a simple VM: Reading the TOD from KVM to
stop it right away until the guest is actually started means that the
time of any simple VM will already differ to the host time. We can
simply leave the TOD running and the guest won't be able to recognize
it.
For migration, we actually want to keep the TOD stopped until really
starting the guest. To be able to catch most errors, we should however
try to set the TOD in addition to simply storing it. So we can still
catch basic migration problems.
If anything goes wrong while backing up/restoring the TOD, we have to
ignore it (but print a warning). This is then basically a fallback to
old behavior (TOD remains running).
I tested this very basically with an initrd:
1. Start a simple VM. Observed that the TOD is kept running. Old
behavior.
2. Ordinary live migration. Observed that the TOD is temporarily
stopped on the destination when setting the new value and
correctly started when finally starting the guest.
3. Offline live migration. (stop, migrate, cont). Observed that the
TOD will be stopped on the source with the "stop" command. On the
destination, the TOD is temporarily stopped when setting the new
value and correctly started when finally starting the guest via
"cont".
4. Simple stop/cont correctly stops/starts the TOD. (multiple stops
or conts in a row have no effect, so works as expected)
In the future, we might want to send the guest a special kind of time sync
interrupt under some conditions, so it can synchronize its tod to the
host tod. This is interesting for migration scenarios but also when we
get time sync interrupts ourselves. This however will most probably have
to be handled in KVM (e.g. when the tods differ too much) and is not
desired e.g. when debugging the guest (single stepping should not
result in permanent time syncs). I consider something like that an add-on
on top of this basic "don't break the guest" handling.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181130094957.4121-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Halil does more work in this area than I do right now. Lets add Halil.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20181204133802.100998-1-borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
I fail to see why this is useful as we require MSIX always and
completely fail adding a device.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181105110313.29312-2-david@redhat.com>
Fixes: 4f6482bfe3
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Straightforward test just to let the test-qmp-cmds be complete.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-6-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit ddee57e017.
Meanwhile, revert one line from fa198ad9bd to make sure
qtest_init_without_qmp_handshake() will only pass in one parameter.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-5-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Out-of-band command execution was introduced in commit cf869d5317.
Unfortunately, we ran into a regression, and had to turn it into an
experimental option for 2.12 (commit be933ffc23).
http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html
The regression has since been fixed (commit 951702f39c "monitor: bind
dispatch bh to iohandler context"). A thorough re-review of OOB
commands led to a few more issues, which have also been addressed.
This patch partly reverts be933ffc23 (monitor: new parameter "x-oob"),
and makes QMP monitors again offer capability "oob" whenever they can
provide it, i.e. when the monitor's character device is capable of
running in an I/O thread.
Some trivial touch-up in the test code is required to make sure qmp-test
won't break.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-4-peterx@redhat.com>
[Conflict with "monitor: check if chardev can switch gcontext for OOB"
resolved, commit message updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The initial value of nalloc is -1, but not 1.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1541479952-32355-1-git-send-email-dongli.zhang@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In virtio_blk_handle_request(), in_iov is used for input header while iov
is used for output header. Rename iov to out_iov to pair output header's
name with in_iov to avoid confusing people when reading source code.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-id: 1541520556-8334-1-git-send-email-dongli.zhang@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a QMP client sends in-band commands more quickly that we can
process them, we can either queue them without limit (QUEUE), drop
commands when the queue is full (DROP), or suspend receiving commands
when the queue is full (SUSPEND). None of them is ideal:
* QUEUE lets a misbehaving client make QEMU eat memory without bounds.
Not such a hot idea.
* With DROP, the client has to cope with dropped in-band commands. To
inform the client, we send a COMMAND_DROPPED event then. The event is
flawed by design in two ways: it's ambiguous (see commit d621cfe0a1),
and it brings back the "eat memory without bounds" problem.
* With SUSPEND, the client has to manage the flow of in-band commands to
keep the monitor available for out-of-band commands.
We currently DROP. Switch to SUSPEND.
Managing the flow of in-band commands to keep the monitor available for
out-of-band commands isn't really hard: just count the number of
"outstanding" in-band commands (commands sent minus replies received),
and if it exceeds the limit, hold back additional ones until it drops
below the limit again.
Note that we need to be careful pairing the suspend with a resume, or
else the monitor will hang, possibly forever. And here since we need to
make sure both:
(1) popping request from the req queue, and
(2) reading length of the req queue
will be in the same critical section, we let the pop function take the
corresponding queue lock when there is a request, then we release the
lock from the caller.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a monitor is connected to a Spice chardev, the monitor cleanup
can dead-lock:
#0 0x00007f43446637fd in __lll_lock_wait () at /lib64/libpthread.so.0
#1 0x00007f434465ccf4 in pthread_mutex_lock () at /lib64/libpthread.so.0
#2 0x0000556dd79f22ba in qemu_mutex_lock_impl (mutex=0x556dd81c9220 <monitor_lock>, file=0x556dd7ae3648 "/home/elmarco/src/qq/monitor.c", line=645) at /home/elmarco/src/qq/util/qemu-thread-posix.c:66
#3 0x0000556dd7431bd5 in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x556dd9abc850, errp=0x7fffb7bbddd8) at /home/elmarco/src/qq/monitor.c:645
#4 0x0000556dd79d476b in qapi_event_send_spice_disconnected (server=0x556dd98ee760, client=0x556ddaaa8560, errp=0x556dd82180d0 <error_abort>) at qapi/qapi-events-ui.c:149
#5 0x0000556dd7870fc1 in channel_event (event=3, info=0x556ddad1b590) at /home/elmarco/src/qq/ui/spice-core.c:235
#6 0x00007f434560a6bb in reds_handle_channel_event (reds=<optimized out>, event=3, info=0x556ddad1b590) at reds.c:316
#7 0x00007f43455f393b in main_dispatcher_self_handle_channel_event (info=0x556ddad1b590, event=3, self=0x556dd9a7d8c0) at main-dispatcher.c:197
#8 0x00007f43455f393b in main_dispatcher_channel_event (self=0x556dd9a7d8c0, event=event@entry=3, info=0x556ddad1b590) at main-dispatcher.c:197
#9 0x00007f4345612833 in red_stream_push_channel_event (s=s@entry=0x556ddae2ef40, event=event@entry=3) at red-stream.c:414
#10 0x00007f434561286b in red_stream_free (s=0x556ddae2ef40) at red-stream.c:388
#11 0x00007f43455f9ddc in red_channel_client_finalize (object=0x556dd9bb21a0) at red-channel-client.c:347
#12 0x00007f434b5f9fb9 in g_object_unref () at /lib64/libgobject-2.0.so.0
#13 0x00007f43455fc212 in red_channel_client_push (rcc=0x556dd9bb21a0) at red-channel-client.c:1341
#14 0x0000556dd76081ba in spice_port_set_fe_open (chr=0x556dd9925e20, fe_open=0) at /home/elmarco/src/qq/chardev/spice.c:241
#15 0x0000556dd796d74a in qemu_chr_fe_set_open (be=0x556dd9a37c00, fe_open=0) at /home/elmarco/src/qq/chardev/char-fe.c:340
#16 0x0000556dd796d4d9 in qemu_chr_fe_set_handlers (b=0x556dd9a37c00, fd_can_read=0x0, fd_read=0x0, fd_event=0x0, be_change=0x0, opaque=0x0, context=0x0, set_open=true) at /home/elmarco/src/qq/chardev/char-fe.c:280
#17 0x0000556dd796d359 in qemu_chr_fe_deinit (b=0x556dd9a37c00, del=false) at /home/elmarco/src/qq/chardev/char-fe.c:233
#18 0x0000556dd7432240 in monitor_data_destroy (mon=0x556dd9a37c00) at /home/elmarco/src/qq/monitor.c:786
#19 0x0000556dd743b968 in monitor_cleanup () at /home/elmarco/src/qq/monitor.c:4683
#20 0x0000556dd75ce776 in main (argc=3, argv=0x7fffb7bbe458, envp=0x7fffb7bbe478) at /home/elmarco/src/qq/vl.c:4660
Because spice code tries to emit a "disconnected" signal on the
monitors. Fix this dead-lock by releasing the monitor lock for
flush/destroy.
monitor_lock protects mon_list, monitor_qapi_event_state and
monitor_destroyed. monitor_flush() and monitor_data_destroy() don't
access any of those variables.
monitor_cleanup()'s loop is safe because it uses
QTAILQ_FOREACH_SAFE(), and no further monitor can be added after
calling monitor_cleanup() thanks to monitor_destroyed check in
monitor_list_append().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181205203737.9011-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
monitor_cleanup() is one of the last things main() calls before it
returns. In the following patch, monitor_cleanup() will release the
monitor_lock during flushing. There may be pending commands to insert
new monitors, which would modify the mon_list during iteration, and
the clean-up could thus miss those new insertions.
Add a monitor_destroyed global to check if monitor_cleanup() has been
already called. In this case, don't insert the new monitor in the
list, but free it instead. A cleaner solution would involve the main
thread telling other threads to terminate, waiting for their
termination.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181205203737.9011-7-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
COLO uses a worker context (iothread) to drive the chardev. All
backends are not able to switch the context, let's report an error in
this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181205203737.9011-6-marcandre.lureau@redhat.com>
Reviewed-by: Li Zhijian <lizhiian@cn.fujitsu.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Not all backends are able to switch gcontext. Those backends cannot
drive a OOB monitor (the monitor would then be blocking on main
thread).
For example, ringbuf, spice, or more esoteric input chardevs like
braille or MUX.
We already forbid MUX because not all frontends are ready to run outside
main loop. Replace that by a context-switching feature check.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181205203737.9011-5-marcandre.lureau@redhat.com>
[Error condition simplified, commit message adjusted accordingly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>