Clock ticks are considered as the sources of non-deterministic data for
virtual machine. This patch implements saving the clock values when they
are acquired (virtual, host clock).
When replaying the execution corresponding values are read from log and
transfered to the module, which wants to read the values.
Such a design required the clock polling to be synchronized. Sometimes
it is not true - e.g. when timeouts for timer lists are checked. In this case
we use a cached value of the clock, passing it to the client code.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162427.8676.36558.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch adds module for saving and replaying asynchronous events.
These events include network packets, keyboard and mouse input,
USB packets, thread pool and bottom halves callbacks.
All events are stored in the queue to be processed at synchronization points
such as beginning of TB execution, or checkpoint in the iothread.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162422.8676.88696.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch includes modifications of common cpu files. All interrupts and
exceptions occured during recording are written into the replay log.
These events allow correct replaying the execution by kicking cpu thread
when one of these events is found in the log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162416.8676.57647.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds calls to replay functions into the icount setup block.
In record mode number of executed instructions is written to the log.
In replay mode number of istructions to execute is taken from the replay log.
When replayed instructions counter is expired qemu_notify_event()
function is called to wake up the iothread.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162405.8676.31890.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch is required for deterministic replay to generate an exception
by trying executing an instruction without changing icount.
It adds new flag to TB for disabling icount while translating it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162359.8676.77011.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds icount event to the replay subsystem. This event corresponds
to execution of several instructions and used to synchronize input events
in the replay phase.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162354.8676.31351.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This mutex will protect read/write operations for replay log.
Using mutex is necessary because most of the events consist of
several fields stored in the log. The mutex will help to avoid races.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162348.8676.8628.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds functions to perform read and write operations
with replay log.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162342.8676.29445.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds global variables, defines, function declarations,
and function stubs for deterministic VM replay used by external modules.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 61964 "Add configuration section" broke the analyze-migration.py script
which terminates due to the unrecognised section. Fix the script by parsing
the contents of the configuration section directly into a new
ConfigurationSection object (although nothing is done with it yet).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
Just clean up code, no behavior change.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
'cleanup' seems more appropriate than 'cancel'.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
Because of the patch 3ea3b7fa9af067982f34b of kvm, which introduces a
lazy collapsing of small sptes into large sptes mechanism, now
migration_end() is a time consuming operation because it calls
memroy_global_dirty_log_stop(), which will trigger the dropping of small
sptes operation and takes about dozens of milliseconds, so call
migration_end() before all the vmsate data has already been transferred
to the destination will prolong VM downtime. This operation should be
deferred after all the data has been transferred to the destination.
blk_mig_cleanup() can be deferred too.
For a VM with 8G RAM, this patch can reduce the VM downtime about 30 ms.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
* code cleanup to use symbolic constants for register bank numbers
* fix direct booting of modern Linux kernels on xilinx_zynq by setting
SCLR values to what the kernel expects firmware to have done
* implement SYSRESETREQ for ARMv7M CPU (stellaris boards)
* update MAINTAINERS to mention new qemu-arm mailing list
* clean up display of PSTATE in AArch64 debug logs
* report Secure/Nonsecure status in CPU debug logs
* fix a missing _CCA attribute in ACPI tables
* add support for GICv3 to ACPI tables
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5aa4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20151103' into staging
target-arm queue:
* code cleanup to use symbolic constants for register bank numbers
* fix direct booting of modern Linux kernels on xilinx_zynq by setting
SCLR values to what the kernel expects firmware to have done
* implement SYSRESETREQ for ARMv7M CPU (stellaris boards)
* update MAINTAINERS to mention new qemu-arm mailing list
* clean up display of PSTATE in AArch64 debug logs
* report Secure/Nonsecure status in CPU debug logs
* fix a missing _CCA attribute in ACPI tables
* add support for GICv3 to ACPI tables
# gpg: Signature made Tue 03 Nov 2015 13:58:46 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-20151103:
ARM: ACPI: Fix MPIDR value in ACPI table
hw/arm/virt-acpi-build: Add GICC ACPI subtable for GICv3
hw/arm/virt-acpi-build: _CCA attribute is compulsory
target-arm: Report S/NS status in the CPU debug logs
target-arm: Bring AArch64 debug CPU display of PSTATE into line with AArch32
MAINTAINERS: Add new qemu-arm mailing list to ARM related entries
arm: stellaris: exit on external reset request
armv7-m: Implement SYSRESETREQ
armv7-m: Return DeviceState* from armv7m_init()
arm: xilinx_zynq: Add linux pre-boot
arm: boot: Add board specific setup code API
arm: boot: Adjust indentation of FIXUP comments
target-arm: Add and use symbolic names for register banks
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use mp_affinity of ARMCPU as the CPU MPIDR instead of the CPU index.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1446285001-7316-1-git-send-email-zhaoshenglong@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting VM with GICv3, the kernel needs GICC ACPI subtable to
initialize the CPUs, e.g. MPIDR information. This adds GICC ACPI
subtable for GICv3, but set GICC base address only when gic_version == 2
since it donesn't need GICC base address for GICv3.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1446131773-5018-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ACPI specification 6.2.17 _CCA (Cache Coherency Attribute)
this attribute is compulsory on ARM systems. Add this attribute to
the PCI host bridges as required.
Without this the kernel will produce the error
[Firmware Bug]: PCI device 0000:00:00.0 fail to setup DMA.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Message-id: 1446460786-13663-1-git-send-email-graeme.gregory@linaro.org
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If this CPU supports EL3, enhance the printing of the current
CPU mode in debug logging to distinguish S from NS modes as
appropriate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1445883178-576-3-git-send-email-peter.maydell@linaro.org
The AArch64 debug CPU display of PSTATE as "PSTATE=200003c5 (flags --C-)"
on the end of the same line as the last of the general purpose registers
is unnecessarily different from the AArch32 display of PSR as
"PSR=200001d3 --C- A svc32" on its own line. Update the AArch64
code to put PSTATE in its own line and in the same format, including
printing the exception level (mode).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1445883178-576-2-git-send-email-peter.maydell@linaro.org
We now have a qemu-arm mailing list for ARM patches and discussion,
so add an L: entry for it to the various ARM related entries in
MAINTAINERS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1446129661-5239-1-git-send-email-peter.maydell@linaro.org
Add GPIO in for the stellaris board which calls
qemu_system_reset_request() on reset request.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the SYSRESETREQ bit of the AIRCR register
for armv7-m (ie. cortex-m3) to trigger a GPIO out.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change armv7m_init to return the DeviceState* for the NVIC.
This allows access to all GPIO blocks, not just the IRQ inputs.
Move qdev_get_gpio_in() calls out of armv7m_init() into
board code for stellaris and stm32f205 boards.
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a Linux-specific pre-boot routine that matches the device-
specific bootloaders behaviour. This is needed for modern Linux that
expects the ARM PLL in SLCR to be a more even value (not 26).
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9a9025ea65572586b50dca4e5819032e3c436d64.1446182614.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an API for boards to inject their own preboot software (or
firmware) sequence.
The software then returns to the bootloader via the link register. This
allows boards to do their own little bits of firmware setup without
needed to replace the bootloader completely (which is the requirement
for existing firmware support).
The blob is loaded by a callback if and only if doing a linux boot
(similar to the existing write_secondary support).
Rewrite the comment for the primary boot blob.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These comments start immediately after the current longest name in the
list. Tab them out to the next tab stop to give a little breathing room
and prepare for FIXUP_BOARD_SETUP which will require more indent.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: b9b9bb8f1c307c1ef8a3f26ff1f34fabb34b332e.1446182614.git.crosthwaite.peter@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add BANK_<cpumode> #defines to index banked registers.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
usb->speed is the usb speed the device is actually running on in the
qemu emulation (i.e. from the guests point of view). So when plugging
usb3 devices into ehci hostadapter this is HIGH not SUPER.
To figure whenever the host talks to the device with superspeed we
have to check speedmask instead and see whenever the superspeed bit
is set there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1445603230-11840-1-git-send-email-kraxel@redhat.com
When a device is detached, clear the suspend bit (PORTSC_SUSPEND)
in the port status register.
The specs are not *that* clear what is supposed to happen in case
a suspended device is unplugged. But the enable bit (PORTSC_PED)
is cleared, and the specs mention setting suspend with enable being
unset is undefined behavior. So clearing them both looks reasonable,
and it actually fixes the reported bug.
https://bugzilla.redhat.com/show_bug.cgi?id=1268879
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1445413462-18004-1-git-send-email-kraxel@redhat.com
commit e0d03b8ceb converted VNC startup to use SocketAddress,
the interface socket_listen don't have a port_offset param, so
we need to add the port offset (5900) to both 'port' and 'to' opts.
currently only 'port' is added by offset.
This patch add the port offset to 'to' opts.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1445926252-14830-1-git-send-email-hongyang.yang@easystack.cn
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I have observed that depending on the contents and the encoding it happens
that sending data as RAW sometimes would take less space than the encoded data.
This is especially the case for small updates or areas with high color images.
If sending RAW encoded data is beneficial allow a fall back to RAW encoding
for the framebuffer update.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We now use epoxy to load opengl libraries. This means we don't need to
link opengl libraries directly if interfaces handled by epoxy. With
this, we just need epoxy headers and epoxy's *.so to build.
Tested with epoxy-1.3.1.
- sdl2/gtk/console egl stuff doesn't require other than epoxy
- milkymist-tmu2 glx stuff doesn't require other than epoxy
(lm32 test is limited, because can't find mmone-bios.bin, so just test
to load libGL with "./lm32-softmmu/qemu-system-lm32 -M milkymist,accel=qtest")
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
[ lm32 tested by kraxel ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current KEY_NPAGE/KEY_PPAGE handling is broken on -curses. Those uses
"GREY", but "KEY_MASK" masked out "GREY".
To fix, we have to use correct mask value - SCANCODE_KEYMASK.
Then, this adds support of "shift + pageup/pagedown". With this,
-curses mode can use scroll-up/down as usual like other display modes.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This converts vga code to curses code in console_write_bh().
With this changes, we can see line graphics (for example, dialog uses)
correctly.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If TERM=xterm-256color, COLOR_PAIRS==256 and monitor passes chtype
like 0x74xx. Then, the code uses uninitialized color pair. As result,
monitor uses black for both of fg and bg color, i.e. terminal is
filled by black.
To fix, this initialize above than 64 with default color (fg=white,bg=black).
FIXME: on 256 color, curses may be possible better vga color emulation.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simplify warnings about deprecated options by rewriting them as
"warning: ignoring deprecated option".
Reword -no-kvm-pit-reinjection deprecation warning.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-10-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-11-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Several small improvements:
* Use "cannot" instead of "can not"
* Use 'quotes' instead of `quotes'
* Change "fail to parse" error message to "failed to parse"
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-6-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-7-git-send-email-ehabkost@redhat.com>
Message-Id: <1446217682-24421-9-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-8-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-5-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Except for removing periods and exclamation points, no other changes
were made to the error messages (yet).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-4-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Straightforward replacement, except for qemu_kill_report(), which
printed a common part of its error message first, then the applicable
special part. Print each complete message with a single
error_report() instead.
Multi-line messages were replaced by error_report() followed by
error_printf().
The following changes were made to the error messages:
* The "invalid date format" message was reworded to better fit
the new error_report()+error_printf() pattern.
* On the remaining messages, only the trailing newlines, "qemu:" and
"error:" message prefixes were removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-2-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-3-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XPNe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-11-02' into staging
QAPI patches
# gpg: Signature made Mon 02 Nov 2015 09:07:23 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-qapi-2015-11-02: (25 commits)
qapi: Simplify gen_struct_field()
qapi: Reserve 'u' member name
qapi: Finish converting to new qapi union layout
tpm: Convert to new qapi union layout
memory: Convert to new qapi union layout
input: Convert to new qapi union layout
char: Convert to new qapi union layout
net: Convert to new qapi union layout
sockets: Convert to new qapi union layout
block: Convert to new qapi union layout
tests: Convert to new qapi union layout
qapi-visit: Convert to new qapi union layout
qapi: Start converting to new qapi union layout
qapi-visit: Remove redundant functions for flat union base
qapi: Unbox base members
qapi: Prefer typesafe upcasts to qapi base classes
qapi-types: Refactor base fields output
qapi-visit: Split off visit_type_FOO_fields forward decl
vnc: Hoist allocation of VncBasicInfo to callers
qapi: Reserve 'q_*' and 'has_*' member names
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than having all callers pass a name, type, and optional
flag, have them instead pass a QAPISchemaObjectTypeMember which
already has all that information.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-25-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have separated union tag values from colliding with
non-variant C names, by naming the union 'u', we should reserve
this name for our use. Note that we want to forbid 'u' even in
a struct with no variants, because it is possible for a future
qemu release to extend QMP in a backwards-compatible manner while
converting from a struct to a flat union. Fortunately, no
existing clients were using this member name. If we ever find
the need for QMP to have a member 'u', we could at that time
relax things, perhaps by having c_name() munge the QMP member to
'q_u'.
Note that we cannot forbid 'u' everywhere (by adding the
rejection code to check_name()), because the existing QKeyCode
enum already uses it; therefore we only reserve it as a struct
type member name.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
