Quite a while has passed since we last updated U-Boot for e500. This patch
bumps it to the last released version 2017.07 to make sure users don't feel
like they're using out of date software.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 1499862868-102130-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This pull requests supersedes the one from 2017-07-14. That one had a
couple of subtle regressions: there was a build error for mingw32, and
an instance_size which was theoretically wrong everywhere, but only
actually bit on the Travis OSX build.
There are two major batches in this set, rather than the usual
collection of assorted fixes.
* More DRC cleanup. This gets the state management into a state
which should fix many of the hotplug+migration problems we've
had. Plus it gets the migration stream format into something
well defined and pretty minimal which we can reasonably support
into the future.
* Hashed Page Table resizing. It's been a while since this was
posted, but it's been through several previous rounds of review.
The kernel parts (both guest and host) are merged in 4.11, so
this is the only remaining piece left to allow resizing of the
HPT in a running guest.
There are also a handful of unrelated fixes.
-----BEGIN PGP SIGNATURE-----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=O6NQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170717' into staging
ppc patch queue 2017-07-17
This pull requests supersedes the one from 2017-07-14. That one had a
couple of subtle regressions: there was a build error for mingw32, and
an instance_size which was theoretically wrong everywhere, but only
actually bit on the Travis OSX build.
There are two major batches in this set, rather than the usual
collection of assorted fixes.
* More DRC cleanup. This gets the state management into a state
which should fix many of the hotplug+migration problems we've
had. Plus it gets the migration stream format into something
well defined and pretty minimal which we can reasonably support
into the future.
* Hashed Page Table resizing. It's been a while since this was
posted, but it's been through several previous rounds of review.
The kernel parts (both guest and host) are merged in 4.11, so
this is the only remaining piece left to allow resizing of the
HPT in a running guest.
There are also a handful of unrelated fixes.
# gpg: Signature made Mon 17 Jul 2017 07:36:52 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170717: (21 commits)
target/ppc: fix CPU hotplug when radix is enabled (TCG)
spapr: fix memory leak in spapr_core_pre_plug()
pseries: Allow HPT resizing with KVM
pseries: Use smaller default hash page tables when guest can resize
pseries: Enable HPT resizing for 2.10
pseries: Implement HPT resizing
pseries: Stubs for HPT resizing
ppc/pnv: Remove unused XICSState reference
spapr: fix potential memory leak in spapr_core_plug()
spapr: Implement DR-indicator for physical DRCs only
spapr: Remove sPAPRConfigureConnectorState sub-structure
spapr: Consolidate DRC state variables
spapr: Cleanups relating to DRC awaiting_release field
spapr: Refactor spapr_drc_detach()
spapr: Abort on delete failure in spapr_drc_release()
spapr: Simplify unplug path
spapr: Remove 'awaiting_allocation' DRC flag
spapr: Treat devices added before inbound migration as coldplugged
spapr: Minor cleanups to events handling
spapr: migrate pending_events of spapr state
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEtBAABCAAXBQJZbDM5EBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaYjgf7
BmLHDcueclRZPXIyY2Gbf1/VmRyYeq1IZIYVKLAepDeYqQ4+vVXTwSuoe6cu4r1G
AtCNAoUBwqE+YTg/dgaRF5TNVkLD4LMU6qoBO9RIRNYdz9J6V72NrzeF5rCJvYvx
ghpgbrVgpxjiREodbzxKaEaY5x1x5LqTClSjsz64MmR0ibm2HgMMn2khUr4Z+3wL
jgdRGCpc4xFIBNfjmGY+8OzvHw0+QqWpvWp8gYxMRI/1/wBfQYnUvg9GLuf/fQPe
ZYIYW7jURkjBaRZd1lYxd3MHDLzyjjnSpxas4P1D/QtlakhZCiLbWIAMdxfZWBdj
ieS6w1vgZOuEb+dH6HLNmA==
=x5vk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/block-and-testing-pull-request' into staging
# gpg: Signature made Mon 17 Jul 2017 04:47:05 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/block-and-testing-pull-request:
travis: add no-TCG build
docker.py: Improve subprocess exit code handling
docker.py: Drop infile parameter
docker: Don't enable networking as a side-effect of DEBUG=1
ssh: support I/O from any AioContext
sheepdog: add queue_lock
qed: protect table cache with CoMutex
qed: introduce bdrv_qed_init_state
block: invoke .bdrv_drain callback in coroutine context and from AioContext
qed: move tail of qed_aio_write_main to qed_aio_write_{cow, alloc}
vvfat: make it thread-safe
vpc: make it thread-safe
vdi: make it thread-safe
coroutine-lock: add qemu_co_rwlock_downgrade and qemu_co_rwlock_upgrade
qcow2: call CoQueue APIs under CoMutex
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the cursor resource id isn't set the guest didn't define a cursor.
Skip the cursor update in post_load in that that case.
Reported-by: wanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: wanghaibin <wanghaibin.wang@huawei.com>
Message-id: 20170710070432.856-1-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The QMP query-vnc interfaces have gained a lot more information that
the HMP interfaces hasn't got yet. Update it.
Note the output format has changed, but this is HMP so that's OK.
In particular, this now includes client information for reverse
connections:
-vnc :0
(qemu) info vnc
default:
Server: 0.0.0.0:5900 (ipv4)
Auth: none (Sub: none)
(Now connect a client)
(qemu) info vnc
default:
Server: 0.0.0.0:5900 (ipv4)
Auth: none (Sub: none)
Client: 127.0.0.1:51828 (ipv4)
x509_dname: none
sasl_username: none
-vnc localhost:7000,reverse
(qemu) info vnc
default:
Client: ::1:7000 (ipv6)
x509_dname: none
sasl_username: none
Auth: none (Sub: none)
-vnc :1,password,id=pass -vnc localhost:7000,reverse
(qemu) info vnc
default:
Client: ::1:7000 (ipv6)
x509_dname: none
sasl_username: none
Auth: none (Sub: none)
rev:
Server: 0.0.0.0:5901 (ipv4)
Auth: vnc (Sub: none)
Client: 127.0.0.1:53616 (ipv4)
x509_dname: none
sasl_username: none
This was originally RH bz 1461682
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20170711154414.21111-1-dgilbert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current VNC default keyboard delay is 1ms. With that we're constantly
typing faster than the guest receives keyboard events from an XHCI attached
USB HID device.
The default keyboard delay time in the input layer however is 10ms. I don't know
how that number came to be, but empirical tests on some OpenQA driven ARM
systems show that 10ms really is a reasonable default number for the delay.
This patch moves the VNC delay also to 10ms. That way our default is much
safer (good!) and also consistent with the input layer default (also good!).
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499863425-103133-1-git-send-email-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a voice recording equipment is opened for a long time(several days)
in windows guest, rate->ipos will overflow and rate->opos will never
have a chance to change. It will result to a infinite loop.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Message-id: 1500128061-20849-1-git-send-email-peng.hao2@zte.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rebase ipxe to latest git master.
Pick up four virtio-net fixes.
complete shortlog of ipxe changes
---------------------------------
Adamczyk, Konrad (1):
[thunderx] Use ThunderxConfigProtocol to obtain board configuration
Bartosz Szczepanek (1):
[thunderx] Fix hardware deinitialization
Christian Nilsson (1):
[intel] Add INTEL_NO_PHY_RST for I219-LM (2)
David Decotigny (2):
[build] Return const char * from uuid_ntoa()
[af_packet] Add new AF_PACKET driver for Linux
Jason Wang (1):
[virtio] Support VIRTIO_NET_F_IOMMU_PLATFORM
Jerone Young (1):
[intel] Add support for I219-V in 7th Gen Intel NUC
Konrad Adamczyk (1):
[thunderx] Don't disable NIC when exiting from iPXE
Ladi Prosek (3):
[virtio] Cap queue size to MAX_QUEUE_NUM
[virtio] Simplify virtqueue shutdown
[virtio] Remove queue size limit in legacy virtio
Martin Habets (1):
[sfc] Add driver for Solarflare SFC8XXX adapters
Michael Brown (159):
[interface] Provide intf_reinit() to reinitialise nullified interfaces
[iscsi] Avoid potential infinite loops during shutdown
[efi] Add basic EFI SAN booting capability
[undi] Allocate base memory before calling UNDI loader entry point
[romprefix] Avoid using PMM-allocated memory in UNDI loader entry point
[undi] Clean up driver and device name information
[prefix] Remove impossible progress message
[prefix] Include diagnostic information within progress messages
[undi] Try matching UNDI ROMs in BIOS enumeration order
[efi] Work around temporal anomaly encountered during ExitBootServices()
[ipv4] Accept unicast packets for the local network broadcast address
[build] Add %.vhd target for building VM bootable disk images
[virtio] Use separate RX and TX empty header buffers
[cloud] Add ability to retrieve Google Compute Engine metadata
[virtio] Use host-specified MTU when available
[netdevice] Allow MTU to be changed at runtime
[cloud] Show CPU vendor and model in example cloud boot scripts
[hyperv] Ignore unsolicited VMBus messages
[pic8259] Fix definitions for "read IRR" and "read ISR" commands
[efi] Fix building elf2efi.c when -fpic is enabled by default
[interface] Avoid unnecessary reference counting in intf_unplug()
[interface] Remove misleading comment
[interface] Unplug interface before calling intf_close() in intf_shutdown()
[netdevice] Limit MTU by hardware maximum frame length
[cpuid] Provide cpuid_supported() to test for supported functions
[time] Allow timer to be selected at runtime
[hyperv] Provide timer based on the 10MHz time reference count MSR
[int13] Avoid potential division by zero
[int13] Test correct return status from INT 13 calls
[settings] Add "unixtime" builtin setting to expose the current time
[time] Report attempts to use timers before initialisation
[interface] Provide the ability to shut down multiple interfaces
[http] Cleanly shut down potentially looped interfaces
[efi] Add missing SANBOOT_PROTO_HTTP to EFI default configuration
[block] Remove spurious comments
[block] Centralise SAN device abstraction
[block] Centralise "san-drive" setting
[int13] Refactor to use centralised SAN device abstraction
[efi] Refactor to use centralised SAN device abstraction
[block] Retry any SAN device operation
[iscsi] Use intfs_shutdown() when shutting down multiple interfaces
[scsi] Use intfs_shutdown() when shutting down multiple interfaces
[block] Use intfs_shutdown() when shutting down multiple interfaces
[scsi] Avoid duplicate calls to scsicmd_close()
[build] Provide common ARRAY_SIZE() definition
[efi] Update to current EDK2 headers
[efi] Add EFI_ACPI_TABLE_PROTOCOL header and GUID definition
[efi] Provide ACPI table description for SAN devices
[efi] Skip cable detection at initialisation where possible
[undi] Move PXE API caller back into UNDI driver
[dhcp] Allow vendor class to be changed in DHCP requests
[hermon] Avoid potential integer overflow when calculating memory mappings
[arbel] Avoid potential integer overflow when calculating memory mappings
[xfer] Ensure va_end() is called on failure path
[nfs] Fix double free bug on error path
[linda] Use correct length for memset()
[qib7322] Use correct length for memset()
[sis900] Remove extraneous memset() with incorrect length
[802.11] Remove redundant NULL pointer check after dereference
[crypto] Free correct pointer on the error path
[librm] Fail gracefully if asked to ioremap() a zero length
[usb] Use correct length for memcpy()
[mucurses] Attempt to fix test for empty string
[mucurses] Attempt to fix keypress processing logic
[mucurses] Attempt to fix resource leaks
[hyperv] Fix resource leaks on error path
[slam] Fix resource leak on error path
[slam] Avoid NULL pointer dereference in slam_pull_value()
[eoib] Avoid passing a NULL I/O buffer to netdev_tx_complete_err()
[http] Add missing check for memory allocation failure
[mucurses] Attempt to fix use of uninitialised buffer with strcat()
[xhci] Avoid accessing beyond end of endpoint context array
[build] Avoid confusing sparse in single-argument DBG() macros
[infiniband] Return status code from ib_create_cq() and ib_create_qp()
[infiniband] Return status code from ib_create_mi()
[block] Quell spurious Coverity size mismatch warning
[ath] Add missing break statements
[pixbuf] Avoid potential division by zero
[usb] Use correct length for memcpy()
[xen] Use standard calling pattern for asprintf()
[tcp] Use correct length for memset()
[video_subr] Use memmove() for overlapping memory copy
[arbel] Assert that mapping length is non-zero
[hermon] Assert that mapping length is non-zero
[tlan] Guard against failure to identify chip
[w89c840] Avoid potential array overrun
[sis190] Avoid NULL pointer dereference
[mucurses] Ensure SLK labels are always terminated
[coverity] Add Coverity user model
[malloc] Track maximum heap usage
[travis] Add minimal .travis.yml file
[travis] Build and run the unit test suite
[travis] Integrate with Coverity Scan
[rtl818x] Fix resource leak on error path
[pcnet32] Eliminate redundant register read
[iobuf] Increase minimum I/O buffer size to 128 bytes
[vxge] Fix use of stale I/O buffer on error path
[scsi] Avoid duplicate call to scsicmd_close() on TEST UNIT READY failure
[block] Add dummy SAN device
[block] Add basic multipath support
[int13] Improve geometry guessing for unaligned partitions
[int13con] Avoid overwriting random portions of SAN boot disks
[time] Add sleep_fixed() function to sleep without checking for Ctrl-C
[block] Allow SAN retry count to be reconfigured
[block] Add a small delay between attempts to reopen SAN targets
[block] Retry reopening indefinitely for multipath devices
[block] Gracefully close SAN device if registration fails
[linux] Use dummy SAN device
[block] Ignore redundant xfer_window_changed() messages
[block] Describe all SAN devices via ACPI tables
[iscsi] Do not install iBFT when no iSCSI targets exist
[http] Notify data transfer interface when underlying connection is ready
[mucurses] Fix erroneous __nonnull attribute
[build] Avoid implicit-fallthrough warnings on GCC 7
[linux] Fix building with kernel 4.11 headers
[scsi] Retry TEST UNIT READY command
[libc] Add stdbool.h standard header
[efi] Fix typo in efi_acpi_table_protocol_guid
[efi] Add efi_sprintf() and efi_vsprintf()
[block] Allow use of a non-default EFI SAN boot filename
[intel] Show original CTRL and STATUS values in debugging output
[intel] Do not enable ASDE on i350 backplane NIC
[block] Provide sandev_read() and sandev_write() as global symbols
[block] Provide abstraction to allow system to be quiesced
[hyperv] Do not fail if guest OS ID MSR is already set
[hyperv] Remove redundant return status code from mapping functions
[hyperv] Cope with Windows Server 2016 enlightenments
[efi] Standardise PCI debug messages
[iscsi] Always send FirstBurstLength parameter
[iscsi] Fix iBFT when no explicit initiator name setting exists
[xen] Provide 18 4kB receive buffers to work around xen-netback bug
[efi] Prevent EFI code from being linked in to non-EFI builds
[tls] Keep cipherstream window open until TLS negotiation is complete
[settings] Extend numerical setting tags to 64 bits
[acpi] Make acpi_find_rsdt() a per-platform method
[efi] Provide access to ACPI tables
[acpi] Expose ACPI tables via settings mechanism
[syslog] Handle backspace characters
[hdprefix] Avoid attempts to read beyond the end of the disk
[usb] Allow for USB network devices with no interrupt endpoint
[build] Use -no-pie on newer versions of gcc
[ecm] Display invalid MAC address strings in debug messages
[cpuid] Allow input %ecx value to be specified
[crypto] Expose RSA_CTX_SIZE constant
[crypto] Expose asn1_grow()
[crypto] Provide asn1_built() to construct a cursor from a builder
[crypto] Expose pem_asn1() for use with non-image data
[exanic] Add driver for Exablaze ExaNIC cards
[usb] Use non-zero language ID to retrieve strings
[mucurses] Avoid potential division by zero
[tls] Support RFC5746 secure renegotiation
[smscusb] Abstract out common SMSC USB device functionality
[smsc95xx] Use common SMSC USB device functionality
[smsc75xx] Use common SMSC USB device functionality
[smscusb] Add ability to read MAC address from OTP
[smscusb] Move non-inline register access functions to smscusb.c
[smscusb] Allow for alternative PHY register layouts
[smsc75xx] Expose functionality shared with LAN78xx devices
[lan78xx] Add driver for Microchip LAN78xx USB Ethernet NICs
Mika Tiainen (1):
[intel] Add INTEL_NO_PHY_RST for I219-V
Mike McCormack (1):
[sky2] Use 32-bit read to read Y2_VAUX_AVAIL
Raed Salem (2):
[golan] Update Connect-IB, ConnectX-4 and ConnectX-4 Lx (Infiniband) support
[golan] Bug fixes and improved paging allocation method
Vishvananda Ishaya (1):
[intel] Reset all virtual function settings
Vishvananda Ishaya Abrams (1):
[iscsi] Don't close when receiving NOP-In
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
But when a guest initializes radix mode, it issues a H_REGISTER_PROC_TBL
to update the LPCR of all CPUs. Hot-plugged CPUs inherit from the same
setting under KVM but not under TCG. So, Let's check for radix and update
the default LPCR to keep new CPUs in sync.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In case of error, we must ensure the dynamically allocated base_core_type
is freed, like it is done everywhere else in this function.
This is a regression introduced in QEMU 2.9 by commit 8149e2992f.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
So far, qemu implements the PAPR Hash Page Table (HPT) resizing extension
with TCG. The same implementation will work with KVM PR, but we don't
currently allow that. For KVM HV we can only implement resizing with the
assistance of the host kernel, which needs a new capability and ioctl()s.
This patch adds support for testing the new KVM capability and implementing
the resize in terms of KVM facilities when necessary. If we're running on
a kernel which doesn't have the new capability flag at all, we fall back to
testing for PR vs. HV KVM using the same hack that we already use in a
number of places for older kernels.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We've now implemented a PAPR extension allowing PAPR guest to resize
their hash page table (HPT) during runtime.
This patch makes use of that facility to allocate smaller HPTs by default.
Specifically when a guest is aware of the HPT resize facility, qemu sizes
the HPT to the initial memory size, rather than the maximum memory size on
the assumption that the guest will resize its HPT if necessary for hot
plugged memory.
When the initial memory size is much smaller than the maximum memory size
(a common configuration with e.g. oVirt / RHEV) then this can save
significant memory on the HPT.
If the guest does *not* advertise HPT resize awareness when it makes the
ibm,client-architecture-support call, qemu resizes the HPT for maxmimum
memory size (unless it's been configured not to allow such guests at all).
For now we make that reallocation assuming the guest has not yet used the
HPT at all. That's true in practice, but not, strictly, an architectural
or PAPR requirement. If we need to in future we can fix this by having
the client-architecture-support call reboot the guest with the revised
HPT size (the client-architecture-support call is explicitly permitted to
trigger a reboot in this way).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
We've now implemented a PAPR extensions which allows PAPR guests (i.e.
"pseries" machine type) to resize their hash page table during runtime.
However, that extension is only enabled if explicitly chosen on the
command line. This patch enables it by default for spapr-2.10, but leaves
it disabled (by default) for older machine types.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
This patch implements hypercalls allowing a PAPR guest to resize its own
hash page table. This will eventually allow for more flexible memory
hotplug.
The implementation is partially asynchronous, handled in a special thread
running the hpt_prepare_thread() function. The state of a pending resize
is stored in SPAPR_MACHINE->pending_hpt.
The H_RESIZE_HPT_PREPARE hypercall will kick off creation of a new HPT, or,
if one is already in progress, monitor it for completion. If there is an
existing HPT resize in progress that doesn't match the size specified in
the call, it will cancel it, replacing it with a new one matching the
given size.
The H_RESIZE_HPT_COMMIT completes transition to a resized HPT, and can only
be called successfully once H_RESIZE_HPT_PREPARE has successfully
completed initialization of a new HPT. The guest must ensure that there
are no concurrent accesses to the existing HPT while this is called (this
effectively means stop_machine() for Linux guests).
For now H_RESIZE_HPT_COMMIT goes through the whole old HPT, rehashing each
HPTE into the new HPT. This can have quite high latency, but it seems to
be of the order of typical migration downtime latencies for HPTs of size
up to ~2GiB (which would be used in a 256GiB guest).
In future we probably want to move more of the rehashing to the "prepare"
phase, by having H_ENTER and other hcalls update both current and
pending HPTs. That's a project for another day, but should be possible
without any changes to the guest interface.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces stub implementations of the H_RESIZE_HPT_PREPARE and
H_RESIZE_HPT_COMMIT hypercalls which we hope to add in a PAPR
extension to allow run time resizing of a guest's hash page table. It
also adds a new machine property for controlling whether this new
facility is available.
For now we only allow resizing with TCG, allowing it with KVM will require
kernel changes as well.
Finally, it adds a new string to the hypertas property in the device
tree, advertising to the guest the availability of the HPT resizing
hypercalls. This is a tentative suggested value, and would need to be
standardized by PAPR before being merged.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
e6f7e110ee "ppc/xics: remove the XICSState classes" got rid of
XICSState, this is just an leftover.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit 5c1da81215 ("spapr: Remove unnecessary differences between
hotplug and coldplug paths"), the CPU DT for the DRC is always allocated.
This causes a memory leak for pseries-2.6 and older machine types, that
don't support CPU hotplug and don't allocate DRCs for CPUs.
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to PAPR, the DR-indicator should only be valid for physical DRCs,
not logical DRCs. At the moment we implement it for all DRCs, so restrict
it to physical ones only.
We move the state to the physical DRC subclass, which means adding some
QOM boilerplate to handle the newly distinct type.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Most of the time, the state of a DRC object is contained in the single
'state' variable. However, during the transition from UNISOLATE to
CONFIGURED state requires multiple calls to the ibm,configure-connector
RTAS call to retrieve the device tree for the attached device. We need
some extra state to keep track of where we're up to in delivering the
device tree information to the guest.
Currently that extra state is in a sPAPRConfigureConnectorState
substructure which is only allocated when we're in the middle of the
configure connector process. That sounds like a good idea, but the extra
state is only two integers - on many platforms that will take up the same
room as the (maybe NULL) ccs pointer even before malloc() overhead. Plus
it's another object whose lifetime we need to manage. In short, it's not
worth it.
So, fold the sPAPRConfigureConnectorState substructure directly into the
DRC object.
Previously the structure was allocated lazily when the configure-connector
call discovers it's not there. Now, we need to initialize the subfields
pre-emptively, as soon as we enter UNISOLATE state.
Although it's not strictly necessary (the field values should only ever
be consulted when in UNISOLATE state), we try to keep them at -1 when in
other states, as a debugging aid.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Each DRC has three fields describing its state: isolation_state,
allocation_state and configured. At first this seems like a reasonable
representation, since its based directly on the PAPR defined
isolation-state and allocation-state indicators. However:
* Only a few combinations of the two fields' values are permitted
* allocation_state isn't used at all for physical DRCs
* The indicators are write only so they don't really have a well
defined current value independent of each other
This replaces these variables with a single state variable, whose names
and numbers are based on the diagram in LoPAPR section 13.4. Along with
this we add code to check the current state on various operations and make
sure the requested transition is permitted.
Strictly speaking, this makes guest visible changes to behaviour (since we
probably allowed some transitions we shouldn't have before). However, a
hypothetical guest broken by that wasn't PAPR compliant, and probably
wouldn't have worked under PowerVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
'awaiting_release' indicates that the host has requested an unplug of the
device attached to the DRC, but the guest has not (yet) put the device
into a state where it is safe to complete removal.
1. Rename it to 'unplug_requested' which to me at least is clearer
2. Remove the ->release_pending() method used to check this from outside
spapr_drc.c. The method only plausibly has one implementation, so use
a plain function (spapr_drc_unplug_requested()) instead.
3. Remove it from the migration stream. Attempting to migrate mid-unplug
is broken not just for spapr - in general management has no good way to
determine if the device should be present on the destination or not. So,
until that's fixed, there's no point adding extra things to the stream.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
This function has two unused parameters - remove them.
It also sets awaiting_release on all paths, except one. On that path
setting it is harmless, since it will be immediately cleared by
spapr_drc_release(). So factor it out of the if statements.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
We currently ignore errors from the object_property_del() in
spapr_drc_release(). But the only way that could fail is if the property
doesn't exist, in which case it's a bug that we're in spapr_drc_release()
at all. So change from ignoring to abort()ing on errors.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_lmb_release() and spapr_core_release() call hotplug_handler_unplug()
which after a bunch of indirection calls spapr_memory_unplug() or
spapr_core_unplug(). But we already know which is the appropriate thing
to call here, so we can just fold it directly into the release function.
Once that's done, there's no need for an hc->unplug method in the spapr
machine at all: since we also have an hc->unplug_request method, the
hotplug core will never use ->unplug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The awaiting_allocation flag in the DRC was introduced by aab9913
"spapr_drc: Prevent detach racing against attach for CPU DR", allegedly to
prevent a guest crash on racing attach and detach. Except.. information
from the BZ actually suggests a qemu crash, not a guest crash. And there
shouldn't be a problem here anyway: if the guest has already moved the DRC
away from UNUSABLE state, the detach would already be deferred, and if it
hadn't it should be safe to detach it (the guest should fail gracefully
when it attempts to change the allocation state).
I think this was probably just a bandaid for some other problem in the
state management. So, remove awaiting_allocation and associated code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
When migrating a guest which has already had devices hotplugged,
libvirt typically starts the destination qemu with -incoming defer,
adds those hotplugged devices with qmp, then initiates the incoming
migration.
This causes problems for the management of spapr DRC state. Because
the device is treated as hotplugged, it goes into a DRC state for a
device immediately after it's plugged, but before the guest has
acknowledged its presence. However, chances are the guest on the
source machine *has* acknowledged the device's presence and configured
it.
If the source has fully configured the device, then DRC state won't be
sent in the migration stream: for maximum migration compatibility with
earlier versions we don't migrate DRCs in coldplug-equivalent state.
That means that the DRC effectively changes state over the migrate,
causing problems later on.
In addition, logging hotplug events for these devices isn't what we
want because a) those events should already have been issued on the
source host and b) the event queue should get wiped out by the
incoming state anyway.
In short, what we really want is to treat devices added before an
incoming migration as if they were coldplugged.
To do this, we first add a spapr_drc_hotplugged() helper which
determines if the device is hotplugged in the sense relevant for DRC
state management. We only send hotplug events when this is true.
Second, when we add a device which isn't hotplugged in this sense, we
force a reset of the DRC state - this ensures the DRC is in a
coldplug-equivalent state (there isn't usually a system reset between
these device adds and the incoming migration).
This is based on an earlier patch by Laurent Vivier, cleaned up and
extended.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The rtas_error_log structure is marked packed, which strongly suggests its
precise layout is important to match an external interface. Along with
that one could expect it to have a fixed endianness to match the same
interface. That used to be the case - matching the layout of PAPR RTAS
event format and requiring BE fields.
Now, however, it's only used embedded within sPAPREventLogEntry with the
fields in native order, since they're processed internally.
Clear that up by removing the nested structure in sPAPREventLogEntry.
struct rtas_error_log is moved back to spapr_events.c where it is used as
a temporary to help convert the fields in sPAPREventLogEntry to the correct
in memory format when delivering an event to the guest.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In racing situations between hotplug events and migration operation,
a rtas hotplug event could have not yet be delivered to the source
guest when migration is started. In this case the pending_events of
spapr state need be transmitted to the target so that the hotplug
event can be finished on the target.
To achieve the minimal VMSD possible to migrate the pending_events list,
this patch makes the changes in spapr_events.c:
- 'log_type' of sPAPREventLogEntry struct deleted. This information can be
derived by inspecting the rtas_error_log summary field. A new function
called 'spapr_event_log_entry_type' was added to retrieve the type of
a given sPAPREventLogEntry.
- sPAPREventLogEntry, epow_log_full and hp_log_full were redesigned. The
only data we're going to migrate in the VMSD is the event log data itself,
which can be divided in two parts: a rtas_error_log header and an extended
event log field. The rtas_error_log header contains information about the
size of the extended log field, which can be used inside VMSD as the size
parameter of the VBUFFER_ALOC field that will store it. To allow this use,
the header.extended_length field must be exposed inline to the VMSD instead
of embedded into a 'data' field that holds everything. With this in mind,
the following changes were done:
* a new 'header' field was added to sPAPREventLogEntry. This field holds a
a struct rtas_error_log inline.
* the declaration of the 'rtas_error_log' struct was moved to spapr.h
to be visible to the VMSD macros.
* 'data' field of sPAPREventLogEntry was renamed to 'extended_log' and
now holds only the contents of the extended event log.
* 'struct rtas_error_log hdr' were taken away from both epow_log_full
and hp_log_full. This information is now available at the header field of
sPAPREventLogEntry.
* epow_log_full and hp_log_full were renamed to epow_extended_log and
hp_extended_log respectively. This rename makes it clearer to understand
the new purpose of both structures: hold the information of an extended
event log field.
* spapr_powerdown_req and spapr_hotplug_req_event now creates a
sPAPREventLogEntry structure that contains the full rtas log entry.
* rtas_event_log_queue and rtas_event_log_dequeue now receives a
sPAPREventLogEntry pointer as a parameter instead of a void pointer.
- the endianess of the sPAPREventLogEntry header is now native instead
of be32. We can use the fields in native endianess internally and write
them in be32 in the guest physical memory inside 'check_exception'. This
allows the VMSD inside spapr.c to read the correct size of the
entended_log field.
- inside spapr.c, pending_events is put in a subsection in the spapr state
VMSD to make sure migration across different versions is not broken.
A small change in rtas_event_log_queue and rtas_event_log_dequeue were also
made: instead of calling qdev_get_machine(), both functions now receive
a pointer to the sPAPRMachineState. This pointer is already available in
the callers of these functions and we don't need to waste resources
calling qdev() again.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All the DRC subtypes explicitly list instance_size in TypeInfo (all as
sizeof(sPAPRDRConnector). This isn't necessary, since if it's not listed
it will be derived from the parent type.
Worse, this is dangerous, because if a subtype is changed in future to
have a larger structure, then subtypes of that subtype also need to have
instance_size changed, or it will lead to hard to track memory corruption
bugs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's fairly easy for --disable-tcg to bitrot. Test it in our CI.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170714093016.10897-1-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
A few error handlings are missing because we ignore the subprocess exit
code, for example "docker build" errors are currently ignored.
Introduce _do_check() aside the existing _do() method and use it in a
few places.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170712075528.22770-3-famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The **kwargs can do this just well.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170712075528.22770-2-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
When trying to debug problems with tests it is natural to set
DEBUG=1 when starting the docker environment. Unfortunately
this has a side-effect of enabling an eth0 network interface
in the container, which changes the operating environment of
the test suite. IOW tests with fail may suddenly start
working again if DEBUG=1 is set, due to changed network setup.
Add a separate NETWORK variable to allow enablement of
networking separately from DEBUG=1. This can be used in two
ways. To enable the default docker network backend
make docker-test-build@fedora NETWORK=1
while to enable a specific network backend, eg join the network
associated with the container 'wibble':
make docker-test-build@fedora NETWORK=container:wibble
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170713144352.2212-1-berrange@redhat.com>
[Drop the superfluous second $(subst ...). - Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
The coroutine may run in a different AioContext, causing the
fd handler to busy wait. Fix this by resetting the handler
in restart_coroutine, before the coroutine is restarted.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-12-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This makes the driver thread-safe. The CoMutex is dropped temporarily
while accessing the data clusters or the backing file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-10-pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be used in the next patch, which will call bdrv_qed_do_open
with a CoMutex taken. bdrv_qed_init_state provides a nice place to
initialize it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-9-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will let the callback take a CoMutex in the next patch.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-8-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
