Future patches will enforce the holding of mmap_lock() when we are
manipulating internal memory structures. Technically it doesn't matter
in the case of elfload as we haven't started executing yet. However it
is easier to grab the lock when required than special case the
translate-all API.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-8-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds asserts to check the locking on the various translation
engines structures. There are two sets of structures that are protected
by locks.
The first the l1map and PageDesc structures used to track which
translation blocks are associated with which physical addresses. In
user-mode this is covered by the mmap_lock.
The second case are TB context related structures which are protected by
tb_lock which is also user-mode only.
Currently the asserts do nothing in SoftMMU mode but this will change
for MTTCG.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-4-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulating LL/SC with cmpxchg is not correct, since it can
suffer from the ABA problem. However, portable parallel
code is written assuming only cmpxchg which means that in
practice this is a viable alternative.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1467054136-10430-30-git-send-email-cota@braap.org>
The exception is not emitted anymore.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twidle.net>
Message-Id: <1467054136-10430-29-git-send-email-cota@braap.org>
The variable parallel_cpus controls the generation of thread aware
atomic code. We only need to set it once we clone our first thread.
At this point any existing translations need to be thrown away.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When we cannot emulate an atomic operation within a parallel
context, this exception allows us to stop the world and try
again in a serial context.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Version 2.0 of the semihosting specification introduces new trap
instructions for AArch32: HLT 0xF000 for A32 and HLT 0x3C for T32.
Implement these (in the same way we implement the existing HLT
semihosting trap for A64).
The old traps via SVC and BKPT are unaffected.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1476792973-18508-1-git-send-email-peter.maydell@linaro.org
The output string QEMU with "--version" is very long, it does
not fit into a normal line of a terminal window anymore. By
putting the copyright information on a separate line instead,
the output looks much nicer.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1475661284-30153-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This system call performs the same task as the writev() system call,
with the exception of having the fourth argument, offset, which
specifes the file offset at which the input operation is to be performed.
Because of this, the pwritev() implementation is based on the writev()
implementation in linux-user mode.
But, since pwritev() is implemented in the kernel as a 5-argument syscall,
5 arguments are needed to be handled as input and passed to the host
syscall.
The pos_l and pos_h argument of the safe_pwritev() are of type unsigned
long, which can be of different sizes on different platforms. The input
arguments are converted to the appropriate host size when passed to
safe_pwritev().
Signed-off-by: Dejan Jovicevic <dejan.jovicevic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This system call performs the same task as the readv() system call,
with the exception of having the fourth argument, offset, which
specifes the file offset at which the input operation is to be performed.
Because of this, the preadv() implementation is based on the readv()
implementation in linux-user mode.
But, since preadv() is implemented in the kernel as a 5-argument syscall,
5 arguments are needed to be handled as input and passed to the host
syscall.
The pos_l and pos_h argument of the safe_preadv() are of type unsigned
long, which can be of different sizes on different platforms. The input
arguments are converted to the appropriate host size when passed to
safe_preadv().
Signed-off-by: Dejan Jovicevic <dejan.jovicevic@rt-rk.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
By looking at the file arch/mips/kernel/scall32-o32.S in Linux
kernel, it can be deduced that, for Mips32 platform, syscall
corresponding to number _NR_fadvise64 as defined in kernel file
arch/mips/include/uapi/asm/unistd.h translates to kernel function
sys_fadvise64_64, and that argument layout for this system call is
as follows:
0 32 0 32
+----------------+----------------+
(arg1) | fd | __pad | (arg2)
+----------------+----------------+
(arg3) | buffer | (arg4)
+----------------+----------------+
(arg5) | len | (arg6)
+----------------+----------------+
(arg7) | advise | not used | (arg8)
+----------------+----------------+
The same argument layout can be deduced from glibc code, and
relevant commit messages in linux kernel and glibc.
The fix is to change TARGET_NR_fadvise64 to TARGET_NR_fadvise64_64
in Mips32 syscall numbers table. Array mips_syscall_args[] in
linux-user/main.c also already have "fadvise64_64" (and not
"fadvise64") in corresponding place for the syscall number in
question, so no change for linux-user/main.c.
This patch also fixes the failure LTP test posix_fadvise03, if
executed on Qemu-emulated Mips32 platform (user mode).
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Miroslav Tisma <miroslav.tisma@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
linux-user/mips64/termbits.h and linux-user/mips/termbits.h
originate from the same files in Linux kernel. There is no plan
to split original headers in Linux kernel into Mips32 and Mips64
versions any time soon. Therefore, it is better not to have
separate Mips32 and Mips64 variants in Qemu.
This patch makes these two files effectively the same, allowing the
mainenance by changing only a single file. (This is already done in
the same fashion for some other headers in same directories.)
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Array mips_syscall_args[] determines number of arguments for each
syscall on Mips32. It wasn't updated with newer syscalls. Also,
preadv and pwritev have 5 arguments, not 6.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode syncfs() syscall support. Syscall
syncfs() syncs the filesystem containing file determined by the open
file descriptor passed as the argument to syncfs().
The implementation consists of a straightforward invocation of host's
syncfs(). Configure and strace support is included as well.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode clock_adjtime() syscall support.
The implementation is based on invocation of host's clock_adjtime().
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The sigevent structure includes a union with some fields which
are pointers. For the QEMU target_sigevent structure we must
represent these as abi_ulongs, not host function pointers.
This error was causing the compiler to believe it should 8-align
the _sigev_un union on a 64-bit host, which meant that the
code in target_to_host_sigevent() was looking at the wrong
offset to find the _tid field, and timer_create() would
spuriously fail with EINVAL.
This fixes the final loose end noted in LP:1042388.
While we're editing the structure, switch the 'int32_t' fields
to 'abi_int'; this will only matter for guests with non-standard
integer alignment like m68k.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This commit essentially reverts commit
3af72a4d98, which has replaced
five-argument calls to mremap() by direct mremap syscalls for
compatibility with glibc older than version 2.4.
The direct syscall was buggy for 64bit targets on 32bit hosts
because of the default integer type promotions. Since glibc-2.4
is now a decade old, we can remove this workaround.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The epoll event array which epoll_wait() allocates has a size
determined by the guest which could potentially be quite large.
Use g_try_new() rather than alloca() so that we can fail more
cleanly if the guest hands us an oversize value. (ENOMEM is
not a documented return value for epoll_wait() but in practice
some kernel configurations can return it -- see for instance
sys_oabi_epoll_wait() on ARM.)
This rearrangement includes fixing a bug where we were
incorrectly passing a negative length to unlock_user() in
the error-exit codepath.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Used by fedora21 on ppc64 in the network initialization
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In commit 40df8c0c0722 support was added for target-specific
handling of SHMLBA. Unfortunately the sparc64-specific part
of the change got lost somewhere between the patch being
posted to the list and going into master:
http://patchwork.ozlabs.org/patch/646980/http://patchwork.ozlabs.org/patch/673339/
Add the accidentally-dropped code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There is a duplicate item in strace.list. It is benign, but it
shouldn't be there, since it may lead to confusion and even bugs
in the future. It is the only duplicate in strace.list. This
patch removes it.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There are currently several problems related to syslog() support.
For example, if the second argument "bufp" of target syslog() syscall
is NULL, the current implementation always returns error code EFAULT.
However, NULL is a perfectly valid value for the second argument for
many use cases of this syscall. This is, for example, visible from
this excerpt of man page for syslog(2):
> EINVAL Bad arguments (e.g., bad type; or for type 2, 3, or 4, buf is
> NULL, or len is less than zero; or for type 8, the level is
> outside the range 1 to 8).
Moreover, the argument "bufp" is ignored for all cases of values of the
first argument, except 2, 3 and 4. This means that for such cases
(the first argument is not 2, 3 or 4), there is no need to pass "buf"
between host and target, and it can be set to NULL while calling host's
syslog(), without loss of emulation accuracy.
Note also that if "bufp" is NULL and the first argument is 2, 3 or 4, the
correct returned error code is EINVAL, not EFAULT.
All these details are reflected in this patch.
"#ifdef TARGET_NR_syslog" is also proprerly inserted when needed.
Support for Qemu's "-strace" switch for syslog() syscall is included too.
LTP tests syslog11 and syslog12 pass with this patch (while fail without
it), on any platform.
Changes to original patch by Riku Voipio:
fixed error paths in TARGET_SYSLOG_ACTION_READ_ALL to match
http://lxr.free-electrons.com/source/kernel/printk/printk.c?v=4.7#L1335
Should fix also the build error in:
https://lists.gnu.org/archive/html/qemu-devel/2016-10/msg03721.html
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Since not all Linux host platforms support socketcall() (most notably
Intel), do_socketcall() function in Qemu's syscalls.c is implemented to
mirror the corespondant implementation of socketcall() in Linux kernel,
and to utilise individual socket operations that are supported on all
Linux platforms. (see kernel source file net/socket.c, definition of
socketcall).
However, error codes produced by Qemu implementation are wrong for the
cases of invalid values of the first argument. Also, naming of constants
is not consistent with kernel one, and not consistant with Qemu convention
of prefixing such constants with "TARGET_". This patch in that light
brings do_socketcall() closer to its kernel counterpart, and in that way
fixes the errors and yields more consisrtent Qemu code.
There were also three missing cases (among 20) for strace support for
socketcall(). The array that contains pointers for appropriate printing
functions is updated with 3 elements, however pointers to functions are
left NULL, and its implementation is left for future.
Also, this patch fixes failure of LTP test socketcall02, if executed on some
Qemu emulated sywstems (uer mode).
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If syscalls msgrcv() and msgsnd() fail, they return E2BIG, EACCES,
EAGAIN, EFAULT, EIDRM, EINTR, EINVAL, ENOMEM, or ENOMSG.
By examining negative scenarios of these syscalls for Mips, it was
established that ENOMSG does not have the same value accross all
platforms, but it is nevertheless not included for conversion in
the correspondant conversion table defined in linux-user/syscall.c.
This is certainly a bug, since it leads to the incorrect emulation
of msgrcv() and msgsnd() for scenarios involving ENOMSG.
This patch fixes this by extending the conversion table to include
ENOMSG.
Also, LTP test msgrcv04 will be fixed for some platforms.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Conversion of file creation flags (O_CREAT, ...) from target to host
was missing.
Also, this patch implements better error handling.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements Qemu user mode adjtimex() syscall support.
Syscall adjtimex() reads and optionally sets parameters for a clock
adjustment algorithm used in network synchonization or similar scenarios.
Its declaration is:
int adjtimex(struct timex *buf);
The correspondent source code in the Linux kernel is at kernel/time.c,
line 206.
The Qemu implementation is based on invocation of host's adjtimex(), and
its key part is in the "TARGET_NR_adjtimex" case segment of the the main
switch statement of the function do_syscall(), in linux-user/syscalls.c. All
necessary conversions of the data structures from target to host and from
host to target are covered. Two new functions, target_to_host_timex() and
host_to_target_timex(), are provided for the purpose of such conversions.
For that purpose, the support for related structure "timex" had tp be added
to the file linux-user/syscall_defs.h, based on its definition in Linux
kernel. Also, the relevant support for "-strace" Qemu option is included
in files linux-user/strace.c and linux-user/strace.list.
This patch also fixes failures of LTP tests adjtimex01 and adjtimex02, if
executed in Qemu user mode.
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJX+LTGAAoJEHAbT2saaT5ZIBwH+wfho+xxruEjro6qPvSAtdKk
BBsOWBfBoqWfbAbOxxCO8ina2nA7p5XbyzSXUr94nZhvZMB9BkgL6la03gdS0Yr2
jHf0J9mM8fIbMQFsEKGOPcdpvU7VEXeFwridZYzypiRvbNSdWK3SKVBKgz2ADNhb
l4Tos81IZeH/mw8HcU3XgSGSTV4JuKP4XsnmwlFMa8/sWM/X3vVgx5IG26KURZQm
pW720jcX0meSfji5YvhspfbBbp1g2EorTZb6iLcZf+OUIB6XkViMisVasnyOo2HJ
cehPlhAHixwq1kXGItc1fs11VloZ6hvEZ7kZ615jAdsD2sGJObtGDxgyJW3+gPo=
=HPHj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging
trivial patches for 2016-10-08
# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg: using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
net/filter-mirror: Fix mirror initial check typo
virtio: rename the bar index field name in VirtIOPCIProxy
linux-user: include <poll.h> instead of <sys/poll.h>
char: fix missing return in error path for chardev TLS init
CODING_STYLE: Fix a typo ("have" vs. "has")
bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
build-sys: fix find-in-path
m68k: change default system clock for m5208evb
exec: remove unused compacted argument
usb: ehci: fix memory leak in ehci_process_itd
qapi: make the json schema files more regular.
maint: Add module_block.h to .gitignore
MAINTAINERS: Some updates related to the SH4 machines
MAINTAINERS: Add some more MIPS related files
MAINTAINERS: Add usermode related config files
MAINTAINERS: Add some more pattern to recognize all win32 related files
MAINTAINERS: Add some more rocker related files
MAINTAINERS: Add header files to CRIS section
MAINTAINERS: Add some more files to the virtio section
MAINTAINERS: Add some SPARC machine related files
...
# Conflicts:
# MAINTAINERS
This removes the last usage of <sys/poll.h> in the code base.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is a potential race if several threads exit at once. To serialise
the exits extend the lock above the initial checking of the CPU list.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-11-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Every time a vCPU is hot-plugged, it will "inherit" its tracing state
from the global state array. That is, if *any* existing vCPU has an
event enabled, new vCPUs will have too.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will serve as the base for async_safe_run_on_cpu. Because
start_exclusive uses CPU_FOREACH, merge exclusive_lock with
qemu_cpu_list_lock: together with a call to exclusive_idle (via
cpu_exec_start/end) in cpu_list_add, this protects exclusive work
against concurrent CPU addition and removal.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make CPU work core functions common between system and user-mode
emulation. User-mode does not use run_on_cpu, so do not implement it.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-10-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a mutex for the CPU list to system emulation, as it will be used to
manage safe work. Abstract manipulation of the CPU list in new functions
cpu_list_add and cpu_list_remove.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert pthread_mutex_t and pthread_cond_t to QemuMutex and QemuCond.
This will allow to make some locks and conditional variables common
between user and system mode emulation.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-7-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without this patch, a number of Mips syscalls will be logged in the following
way (in this example, this is an invocation of accept4()):
86906 Unknown syscall 4334
This patch provides standard Qemu's strace output for such cases, like this:
95861 accept4(3,1996486000,1996486016,128,0,0) = 5
Such output may be further improved by providing strace-related functions
that handle only particular syscalls, but this is beyond the scope of
this patch.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
EDQUOT is defined for Mips platform in Linux kernel in such a way
that it has different value than on most other platforms. However,
correspondent TARGET_EDQUOT for Mips is missing in Qemu code. Moreover,
TARGET_EDQUOT is missing from the table for conversion of error codes
from host to target. This patch fixes these problems.
Without this patch, syscalls add_key(), keyctl(), link(), mkdir(), mknod(),
open(), rename(), request_key(), setxattr(), symlink(), and write() will not
be able to return the right error code in some scenarios on Mips platform.
(Some of these syscalls are not yet supported in Qemu, but once they are
supported, they will need correct EDQUOT handling.)
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The function that is changed in this patch is supposed to indicate that
there was certain argument rearrangement related to 64-bit arguments on
32-bit platforms. The background on such rearrangements can be found,
for example, in the man page for syscall(2).
However, for 64-bit Mips architectures there is no such rearrangement,
and this patch reflects it.
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
This patch corrects target_semid64_ds structure definition for Mips.
See, for example definition of semid64_ds for Mips in Linux kernel:
arch/mips/include/uapi/asm/sembuf.h#L13.
This patch will also fix certain semaphore-related LTP tests for Mips,
if they are executed in Qemu user mode for any Mips platform.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Structure flock is defined for Mips in a way different from any
other platform. For reference, see Linux kernel source code files:
arch/mips/include/uapi/asm/fcntl.h, line 63 (for Mips)
include/uapi/asm-generic/fcntl.h, line 195 (for all other platforms)
This patch fix this problem, by amending structure target_flock,
for Mips only.
Besides, this patch fixes LTP tests fcntl11, fcntl17, fcntl19, fcntl20,
and fcntl21, which are currently failing, if executed in Qemu user mode
for Mips platforms.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
For some reason, Qemu's TARGET_F_GETOWN constant for Mips does not
match the correct value of correspondent F_GETOWN. This patch fixes
this problem.
For reference, see Mips' F_GETOWN definition in Linux kernel at
arch/mips/include/uapi/asm/fcntl.h#L44.
This patch also fixes some fcntl()-related LTP tests for Qemu
user mode for Mips.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
This patch fixes wrong definition of TARGET_SIOCATMARK for mips,
alpha, and sh4.
The current definition is:
#define SIOCATMARK 0x8905
while the correct definition is:
#define SIOCATMARK TARGET_IOR('s', 7, int)
See Linux kernel source file arch/mips/include/uapi/asm/sockios.h#L19
for reference.
This patch also a fixes LTP test failure for test sockioctl01, for
mips, alpha, and sh4.
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Only the POWER[789] CPUs should have the ARCH_206 bit set. This is what the
linux kernel does. I guess this was also the intention of commit 0e019746.
We have to make sure all *206 bits are set.
Before this patch, the flags check in the GET_FEATURES2 macro returned true
if _any_ bit was set. This worked well as long as there was only one bit
set in the 'flag' parameter. But as explained before, we have to make sure
all bits in the 'flag' parameter are set.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There were a number of bugs in the implementation:
- The structure alignment was wrong for 64-bit.
- Also 64-bit only does RT signals.
- On 64-bit, we need to put a pointer to the (aligned) vector registers
in the frame and use it for restoring
- We had endian bugs when saving/restoring vector registers
- My recent fixes for exception NIP broke sigreturn in user mode
causing us to resume one instruction too far.
- Add VSR second halves
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
